From 6ad6d7707e893016e82eeb75f4f08131d12700e7 Mon Sep 17 00:00:00 2001
From: Sebastian Schmelzer
Date: Mon, 4 Oct 2010 17:42:02 +0200
Subject: remove uClibc stuff - part I

---
 src/initramfs/scripts/bin/dhcpmkconfig |  47 +++++
 src/initramfs/scripts/bin/hwautocfg    | 299 ++++++++++++++++++++++++++++++++
 src/initramfs/scripts/bin/init-wrapper |  60 +++++++
 src/initramfs/scripts/bin/servconfig   | 308 +++++++++++++++++++++++++++++++++
 4 files changed, 714 insertions(+)
 create mode 100755 src/initramfs/scripts/bin/dhcpmkconfig
 create mode 100755 src/initramfs/scripts/bin/hwautocfg
 create mode 100755 src/initramfs/scripts/bin/init-wrapper
 create mode 100755 src/initramfs/scripts/bin/servconfig

(limited to 'src/initramfs/scripts/bin')

diff --git a/src/initramfs/scripts/bin/dhcpmkconfig b/src/initramfs/scripts/bin/dhcpmkconfig
new file mode 100755
index 00000000..fa01db75
--- /dev/null
+++ b/src/initramfs/scripts/bin/dhcpmkconfig
@@ -0,0 +1,47 @@
+#!/bin/sh
+# Copyright (c) 2003..2006 - RZ Uni Freiburg
+# Copyright (c) 2006..2010 - OpenSLX GmbH
+#
+# This program is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found under http://openslx.org
+#
+# Universal (distro independent) IP configuration writer for busybox udhcpc 
+# applet used within OpenSLX initramfs. The result is written to the 
+# /etc/initramfs-setup file
+
+# script started twice by udhcpc, quit fast if no ip configuration present
+[ -z "$ip" ] && exit 0
+
+# heavy debugging output in level 3 and above ... and on 13
+#FIXME: DEBUGLEVEL is not propagated to this file (at least for Ubuntu)
+[ -z "$DEBUGLEVEL" ] && DEBUGLEVEL=0
+[ $DEBUGLEVEL -gt 3 -a $DEBUGLEVEL -lt 8 -o $DEBUGLEVEL -eq 13 ] && \
+  set -x
+
+echo -e "# network configuration written by $0:" >/tmp/confviadhcp
+unset HOME IFS KCMDLINE DEBUGLEVEL MODPRV TERM BOOTIF BOOT_IMAGE \
+       infomsg mask lease interface cfgmsg cfgfile boot_file no_bootsplash
+# set the broadcast address if not delivered by dhcp
+[ -z "$broadcast" ] && \
+  broadcast=$(ipcalc -b $ip/$subnet|sed s/.*=//)
+set | sed \
+  -e "s,^P.*,,;s,ntpsrv,ntp_servers,;s,ip,clientip," \
+  -e "s,serverid,serverip,;s,subnet,subnet_mask," \
+  -e "s,router,gateway,;s,hostname,host_name," \
+  -e "s,domain,domain_name,;s,dns,domain_name_servers," \
+  -e "s,broadcast,broadcast_address,;s,dhc.*,,;/^$/d" \
+  -e "s,nissrv,nis_servers,;s,nisdomain_name,nis_domain," \
+  -e "s,wins,netbios_name_servers,;/OPTIND.*/d" >>/tmp/confviadhcp
+
+# generate a local /etc/resolv.conf (might overwrite the version from preboot)
+[ -n "$domain" ] && echo -e "search $domain\n" >/etc/resolv.conf
+test -n "$dns" && {
+  for name in $dns; do
+    echo nameserver $name >>/etc/resolv.conf;
+  done; }
+
diff --git a/src/initramfs/scripts/bin/hwautocfg b/src/initramfs/scripts/bin/hwautocfg
new file mode 100755
index 00000000..1f02892e
--- /dev/null
+++ b/src/initramfs/scripts/bin/hwautocfg
@@ -0,0 +1,299 @@
+#!/bin/sh
+# Copyright (c) 2003..2006 - RZ Uni Freiburg
+# Copyright (c) 2006..2010 - OpenSLX GmbH
+#
+# This program is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found under http://openslx.org
+#
+# Universal (distro independent) hardware autoconfiguration script for 
+# OpenSLX linux stateless clients, using SuSE hwinfo for configuration
+
+#############################################################################
+# pre part, load USB modules and start hardware detection pci
+base () {
+# avoid annoying error messages because of missing scripts
+for tool in /usr/sbin/acpidump \
+            /usr/bin/udevinfo \
+            /sbin/dmraid ; do
+              testmkd ${tool%/*}
+              echo -e "#!/bin/sh" >${tool}
+              chmod u+x ${tool}
+done
+# no kernel messages, switch on hotplug via /sbin/mdev
+echo "0 0 0 0" >/proc/sys/kernel/printk
+echo "/sbin/mdev" >/proc/sys/kernel/hotplug
+modprobe -a ${MODPRV} usbhid hid-bright 2>/dev/null &
+# check from vga= that the traditional framebuffer is needed e.g. for splashy
+# get information on the graphics adaptor if bootsplash or xserver plugins are
+# present and the new drm/kms infrastructure is present
+if strinfile "vga=" /proc/cmdline; then
+  ( modprobe -a vesafb fbcon 2>/dev/null
+    hwinfo --gfxcard >/etc/hwinfo.gfxcard ) &
+elif [ -e /etc/init-hooks/00-started/xserver.sh -o \
+       -e /etc/init-hooks/05--have-kernelvars/bootsplash.sh ] && \
+     [ -e /lib/modules/${KERNEL}/kernel/drivers/gpu ]; then
+ # check for the standard modules (single gpu, multiple connector only)
+  ( hwinfo --gfxcard >/etc/hwinfo.gfxcard
+    case $(cat /etc/hwinfo.gfxcard) in
+       *i915*)
+         modprobe -a ${MODPRV} i915 2>/dev/null
+         ;;
+       *intel*|*Intel*)
+         modprobe -a ${MODPRV} i810 i830 i915 2>/dev/null
+         ;;
+       *nvidia*|*NVidia*|*nouveau*)
+         modprobe ${MODPRV} nouveau 2>/dev/null
+         ;;
+       *radeon*|*Radeon*)
+         modprobe ${MODPRV} radeon 2>/dev/null
+         ;;
+       *mga*|*matrox*|*Matrox*)
+         modprobe ${MODPRV} mga 2>/dev/null
+         ;;
+       *)
+         modprobe -a ${MODPRV} r128 savage sis tdfx ttm via
+         ;;
+    esac
+    modprobe -a drm fbcon; mdev -s ) & 
+fi
+ 
+# check and then load appropriate network card modules
+nwcardlist=$(echo ${slxconf_listnwmod}|sed "s/\ /|/g")
+# save results for later info and for Xen plugin when starting Xen VM
+hwinfo --netcard --usb-ctrl >/etc/hwinfo.netcard-usbctrl
+grep modprobe /etc/hwinfo.netcard-usbctrl | grep -E "$nwcardlist|hcd" | \
+  grep -v ehci | sed 's/.* Cmd: "//;s/"//' | sort -u >/etc/modprobe.base
+# virtio hack
+if [ $(grep -ic "virtio_pci" /etc/modprobe.base) -ge 1 ]; then
+  echo "modprobe virtio_net" >>/etc/modprobe.base
+fi
+sh /etc/modprobe.base; mdev -s
+
+# optimization possible: exclude network and usb base drivers from the
+# following list (bios detection for non-hwautocfg component)
+( hwinfo --pci >/etc/hwinfo.data; echo "read pci device list at $(sysup)" \
+    >/tmp/hwdataready ) &
+( usleep 100000 ; hwinfo --bios >/etc/hwinfo.bios ) &
+# for mounting partitions/devices with the "auto" option
+echo -e "ext3\next2\nreiserfs\nxfs\njfs\next4\nvfat" >/etc/filesystems
+# request a local block device for config and root filesystem (lbd://)
+if grep -iq '"lbd://' /proc/cmdline /etc/initramfs-setup; then
+  modprobe -a ${MODPRV} ehci_hcd usb-storage sd_mod
+  mdev -s
+fi
+return 0
+}
+
+#############################################################################
+# main part
+hwmain () {
+# activate the previously detected devices
+[ $DEBUGLEVEL -ge 2 ] || modloadbg=" >/dev/null 2>\&1"
+# check for rtc if not compiled directly into the kernel
+( [ -e /proc/driver/rtc ] || modprobe ${MODPRV} rtc-cmos ) &
+waitfor /tmp/hwdataready 10000
+sed '/Driver Info #1/,/Config Status:/d' \
+  /etc/hwinfo.data | grep modprobe | sed "s|.* Cmd: \"||;s|\"|$modloadbg|" \
+    | sort -u >/etc/modprobe.pci
+sh /etc/modprobe.pci
+mdev -s
+
+# bluetooth setup (start it later if present, depends on firmware availa-
+# bility, interpreted by servconfig)
+#( hwinfo --bluetooth >/etc/hwinfo.bt ) &
+
+# load harddisk driver and check for harddisk
+( grep -q -E "SCSI|SATA" /etc/hwinfo.data && modprobe ${MODPRV} sd_mod
+  grep -q -E  "IDE" /etc/hwinfo.data && modprobe ${MODPRV} ide-disk
+  hwinfo --disk | sed -n "/Device File: /p" | \
+    sed -e "s|.*Device File: /dev/||;s| .*||" >/etc/hwinfo.disk
+  echo "disk detection finished at $(sysup)" >/tmp/diskready; ) &
+[ $DEBUGLEVEL -eq 21 ] && echo "** finished 2nd hwdetection at $(sysup)"
+
+# load disk/optical high level drivers
+modprobe ${MODPRV} ide-cd 2>/dev/null
+modprobe ${MODPRV} sr_mod 2>/dev/null
+modprobe ${MODPRV} ide-floppy 2>/dev/null
+mdev -s
+
+# load kernel module for ps2 mice and map the mousehandler to /dev/input/mice
+( [ -f /lib/modules/${KERNEL}/kernel/drivers/input/mouse/psmouse.ko ] && \
+    modprobe ${MODPRV} psmouse 
+  [ -f /lib/modules/${KERNEL}/kernel/drivers/input/mousedev.ko ] && \
+    modprobe ${MODPRV} mousedev
+  testmkd /dev/input 
+  mknod /dev/input/mice c 13 63 2>/dev/null
+  hwinfo --mouse >/etc/hwinfo.mouse ) &
+
+# complete the audio configuration and load the dummy module if no audio
+# hardware is present in the machine
+grep -q -E "Audio|sound" /etc/hwinfo.data || modprobe snd-dummy
+modprobe ${MODPRV} snd-pcm-oss
+modprobe ${MODPRV} snd-mixer-oss
+#ln -s /proc/sound/oss/sndstat /dev/sndstat
+
+[ $DEBUGLEVEL -eq 21 ] && echo "** finished most of module loading at $(sysup)"
+
+# scanner setup (fixme: to be checked)
+hwinfo --scanner >/etc/hwinfo.scanner
+[ -f /tmp/scanner-udev ] && cat /tmp/scanner-udev \
+  >>/mnt/etc/udev/rules.d/04-scanner.rules
+
+# parallel port setup
+modprobe ${MODPRV} parport_pc && modprobe ${MODPRV} ppdev
+
+# if any new device appeared up to now
+mdev -s
+return 0
+}
+#############################################################################
+# harddisk partition setup part
+disk () {
+# get idea of availabe harddisk partitions, put swap partitions into
+# (/mnt)/etc/fstab and format and mount partitions of type 44 (unknown)
+[ $DEBUGLEVEL -eq 21 ] && echo "** starting hdd stuff at $(sysup)"
+waitfor /tmp/diskready 20000
+if [ -s /etc/hwinfo.disk ] ; then
+  for hd in $(cat /etc/hwinfo.disk) ; do
+    fdisk -l /dev/$hd|sed -n "/^\/dev\//p" >/etc/disk.partition
+    for hdpartnr in $(cat /etc/disk.partition | \
+        sed -n -e "/ 82 /p"|sed -e "s/[[:space:]].*//") ; do
+      echo -e "$hdpartnr\tswap\t\tswap\t\tdefaults\t 0 0" >>/tmp/fstab
+    done
+    # we use special non assigned partition type (id44) for harddisk scratch 
+    # space, thus no normal filesystem will be incidentally deleted or
+    # corrupted
+    for hdpartnr in $(cat /etc/disk.partition | \
+        sed -n -e "/ 44 /p"|sed -e "s/[[:space:]].*//") ; do
+      # check for supported filesystem and formatter
+      ( if diskfm $hdpartnr ; then
+          echo "$hdpartnr is mounted to /mnt/tmp at $(sysup)" >/tmp/tmpready
+          echo -e "$hdpartnr\t/tmp\t\tauto\t\tdefaults\t 0 0" >>/tmp/fstab
+        else
+          echo "formatting failed for some reason ($(sysup))" >/tmp/tmpready
+        fi ) &
+      part44=yes
+      break
+    done
+    # put detected linux partitions (83) into /etc/fstab with "noauto", 
+    # special partition 45 (persistent scratch) to /var/scratch and 46
+    # to /var/openslx
+    for partid in 83 45 46 ; do
+      for hdpartnr in $(cat /etc/disk.partition | \
+          sed -n -e "/ ${partid} /p"|sed -e "s/[[:space:]].*//") ; do
+        mkdir -p /mnt/media/${hdpartnr#/dev/*} 2>/dev/null
+        if [ ${partid} -eq 83 ] ; then
+          echo -e "$hdpartnr\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto,\
+noexec\t 0 0" >>/tmp/fstab
+        elif [ ${partid} -eq 45 ] ; then
+          # if more than one id45 present, the latter ones are simply mounted
+          # over the previous (the mounts are postponed a bit via do_mnt to
+          # have the filesystem completely prepared) 
+          echo -e "waitfor ${hdpartnr} 4000\n\
+            mount -t auto ${hdpartnr} /mnt/media/${hdpartnr#/dev/*}\n\
+            ln -sf /media/${hdpartnr#/dev/*} /mnt/var/scratch" >>/etc/do_mnt
+          echo -e "${hdpartnr}\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto\
+\t\t 0 0" >>/tmp/fstab
+        elif [ ${partid} -eq 46 ] ; then
+          # mount a home directory to (/mnt)/var/home
+          echo -e "waitfor ${hdpartnr} 4000\n\
+            mount -t auto ${hdpartnr} /mnt/media/${hdpartnr#/dev/*} \n\
+            test -d /mnt/media/${hdpartnr#/dev/*}/home && \
+              ln -sf /media/${hdpartnr#/dev/*} /mnt/var/home" >>/etc/do_mnt
+          echo -e "${hdpartnr}\t/media/${hdpartnr#/dev/*}\tauto\t\tnoauto\
+\t\t 0 0" >>/tmp/fstab
+        fi
+      done
+    done
+    # add 
+    [ -f /etc/do_mnt ] && sed -e "1i. /etc/functions" -i /etc/do_mnt
+  done
+  # determine if tmp preparation should wait for format/mount or not
+  [ -z "$part44" ] && echo "finished at $(sysup)" >/tmp/tmpready
+else
+  echo "no harddisk found ( $(sysup) )" >/tmp/tmpready
+fi
+[ $DEBUGLEVEL -eq 21 ] && echo "** finished hdd stuff at $(sysup)"
+}
+
+#############################################################################
+# cleanup/finishing part
+finish () {
+mdev -s
+# mount filesystem parts (if any) requested in disk setup
+[ -f /etc/do_mnt ] && sh /etc/do_mnt &
+# remove unneeded disk and mouse drivers
+[ ! -s /etc/hwinfo.disk ] && rmmod sd_mod 2>/dev/null
+#grep -q " PS/2 " /etc/hwinfo.mouse || \
+#  { rmmod psmouse 2>/dev/null; rm /dev/psaux 2>/dev/null; }
+# more sophistication possible :)
+# remove /sbin/mdev as not available in stage4
+echo >/proc/sys/kernel/hotplug
+return 0
+}
+
+#############################################################################
+# main script starts here
+
+# functions common for all distros
+. /etc/functions
+# functions common for all distros, messages contains all error and
+# info output
+. /etc/messages
+# load distro specific configuration variables and functions. distro
+# specific functions may overwrite functions defined in /etc/functions
+. /etc/distro-functions
+# source general slx and initramfs-setup settings
+. /etc/slxsystem.conf
+. /etc/initramfs-setup
+
+# script run timer
+[ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 21 ] && \
+  echo "** HW $1 setup started at $(sysup)"
+
+# heavy debugging output in level 3 and above and specific for 11
+[ $DEBUGLEVEL -gt 3 -a $DEBUGLEVEL -lt 8 -o $DEBUGLEVEL -eq 11 ] && \
+  set -x
+
+case $1 in
+  # pre initialization: loading USB base and network adaptor modules,
+  # detection of other pci bus modules
+  base)
+    base
+  ;;
+  # main part of hardware setup of pci stuff
+  main)
+    hwmain
+    # main script run timer or debug information
+    [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 21 ] && \
+      echo "** HW main setup finished at $(sysup)"
+    echo "hwsetup main part finished at $(sysup)" >/tmp/hwcfg
+  ;;
+  # disk setup part (detecting general id82,83 and slx id44,45,46, formatting 
+  # if required and mounting)
+  disk)
+    # try to enable compressed RAM SWAP
+    if modprobe ${MODPRV} ramzswap && [ -f /usr/bin/rzscontrol ] ; then
+      mdev -s
+      rzscontrol /dev/ramzswap0 --init
+      swapon /dev/ramzswap0
+      #hdswap="# disk swap disabled because of enabled compressed ramswap"
+    fi
+    # if disk action is not disabled
+    if [ "x${hw_local_disk}" != "xno" ] ; then
+      disk
+    else
+      echo "using harddisk switched off by hw_local_disk set to 'no' ( $(sysup) )" \
+        >/tmp/tmpready
+    fi
+  ;;
+  # remove unneeded kernel modules
+  finish)
+    finish
+  ;;
+esac
diff --git a/src/initramfs/scripts/bin/init-wrapper b/src/initramfs/scripts/bin/init-wrapper
new file mode 100755
index 00000000..57fcb8a0
--- /dev/null
+++ b/src/initramfs/scripts/bin/init-wrapper
@@ -0,0 +1,60 @@
+#!/bin/sh
+# Copyright (c) 2006..2010 - OpenSLX GmbH
+#
+# This program is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found at http://openslx.org
+#
+# wrapperscript for plugin init files
+#############################################################################
+
+# Get parameters
+init_file="$1"
+DEBUGLEVEL="$2"
+
+[ -z $DEBUGLEVEL ] && DEBUGLEVEL=0
+
+# How do the localization here? There is not yet a country-Variable
+. /etc/messages
+. /etc/functions
+. /etc/distro-functions
+
+# Configuration settings for this slx system's environment
+. /etc/slxsystem.conf 2>/dev/null
+
+# initramfs-setup configuration (common initial settings for all clients using
+# a certain InitRamFS generated by slxconfig-demuxer)
+[ -f /etc/initramfs-setup ] && . /etc/initramfs-setup 2>/dev/null
+
+# Initial
+testmkd /tmp/env
+
+if [ ! -f /tmp/env/base.sed ]; then
+  # Get environment and prepare as sed command
+  pre_env_base=$(env | sed -e 's/^\([^=]*\).*/\1/' | tr '\n' ';')
+  pre_env_base=$(echo $pre_env_base| sed -e 's/;/\.\*\/\/;s\/\^/g')
+  pre_env_base="s/^$pre_env_base//;"
+  $(echo $pre_env_base > /tmp/env/base.sed)
+else
+  pre_env_base=$(cat /tmp/env/base.sed)
+fi
+
+# Load temporary environments
+[ -f /tmp/env/wrapper.env ] && . /tmp/env/wrapper.env
+
+[ "${DEBUGLEVEL}" -eq 15 ] && set -x
+[ -f $init_file ] && . $init_file
+[ "${DEBUGLEVEL}" -eq 15 ] && set +x
+
+# Remove already known environment variables from postenv
+#env |sed -e $pre_env_base | sort -u | \
+# Store the environment for re-initialization in runinithook function
+env | grep -v -E "debug|DEBUGLEVEL" | sort -u | \
+ sed "1s|.*|# generated by init-wrapper; last changed by $init_file|" | \
+ sed -e 's/^\([^=]*\)=\(.*\)/export \1="\2"/' \
+ > /tmp/env/wrapper.env
+
diff --git a/src/initramfs/scripts/bin/servconfig b/src/initramfs/scripts/bin/servconfig
new file mode 100755
index 00000000..1248918e
--- /dev/null
+++ b/src/initramfs/scripts/bin/servconfig
@@ -0,0 +1,308 @@
+#!/bin/sh
+# Copyright (c) 2003..2006 - RZ Uni Freiburg
+# Copyright (c) 2006..2010 - OpenSLX GmbH
+#
+# This program is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found under http://openslx.org
+#
+# universal (distro independent) configuration script for OpenSLX linux
+# diskless clients (executed in stage3 within initial ramfs). The file-
+# system setup is completed when servconfig starts
+
+#############################################################################
+# check for configuration files to source
+
+# functions common for all distros, messages contains all error and
+# info output
+. /etc/messages
+. /etc/functions
+# load distro specific configuration functions. Distro specific functions may
+# overwrite functions defined in /etc/functions
+. /etc/distro-functions
+. /etc/slxsystem.conf
+
+# load variables defined by plugins
+[ -f /tmp/env/wrapper.env ] && . /tmp/env/wrapper.env
+
+# script run timer
+[ $DEBUGLEVEL -eq 8 ] && echo "** SW setup started at $(sysup)"
+
+# heavy debugging output in level 3 and below 8 ...
+[ $DEBUGLEVEL -gt 3 -a $DEBUGLEVEL -lt 8 -o $DEBUGLEVEL -eq 12 ] && \
+  set -x
+
+#############################################################################
+# read and unify configuration options - default configuration file, from
+# dhcp, ldap ...
+# wait for the appearance of configuration from several sources
+cfgcomplete
+. /etc/initramfs-setup
+[ $DEBUGLEVEL -eq 8 ] && echo "** Config info is complete at $(sysup)"
+
+# copy additional configuration and var files and directories
+# admins can place there files in /var/lib/openslx/config/...
+# to be packed during stage2 into (/srv/dxs)/tftpboot/client-config...)
+cp -a /rootfs/* /mnt 2>/dev/null
+
+# copy passwd, group files for temporarily (within stage3 configuration) used
+# by chown
+cp /mnt/etc/passwd /etc
+cp /mnt/etc/group /etc
+
+# set greeting and add information on booted system
+len=$(expr length ${SLXVERSION}${SYSTEM_NAME})
+if [ $len -le 28 ] ; then
+  vdstr="Stateless Workstation (V${SLXVERSION}/${SYSTEM_NAME})"
+  smax=28
+else
+  vdstr="V${SLXVERSION}/${SYSTEM_NAME}"
+  smax=52
+fi
+while [ $len -le $smax ] ; do
+  vdstr="$vdstr "
+  len=$(($len + 1))
+done
+len=$(expr length ${host_name})
+while [ $len -le 30 ] ; do
+  space="$space "
+  len=$(($len + 1))
+done
+echo "
+   WELCOME TO                 $space        \n (\l)
+           _____  ______  ______ __    __    _______ __     __    __
+          /  _   |   _   |   ___|  |  |  |  |   ____|  |   |  |  |  |
+         |  | |  |  |_|  |  |_  |   |    |  |  |___ |  |        /  /
+         |  | |  |   ___/|   _|      |   |   ____   |  |     |    |
+         |  |_|  |  |    |  |___|  |  |  |   ____|  |  |___ /  /
+           _____/|__|    |______|__|  |__|  |_______|______|__|  |__|
+
+   $vdstr (c) <OpenSLX.ORG>
+" >/mnt/etc/issue
+
+#############################################################################
+# set localization and add entries to initialize keytable and consolefont to
+# boot.slx
+if [ -z "${country}" ] ; then
+  error "$scfg_country" nonfatal
+  country="us"
+fi
+# do localization (this functions simply sets a list of variables)
+localization "${country}"
+# start distrospecific localization
+dlocale
+
+#############################################################################
+# setup passwd and shadow for local system users like root, bin, daemon and
+# nobody if no user/admin provided passwd exists ... fixme: see #206
+[ ! -e /rootfs/etc/shadow ] && \
+  basepasswd $(sed "/+::0/d;s/root://;s/:.*//" /rootfs/etc/shadow 2>/dev/null)
+
+#############################################################################
+# dns and ip configuration
+# hostname of the machine
+echo "$host_name" >/proc/sys/kernel/hostname
+echo -e "# /etc/hosts - file generated by $0 during OpenSLX stage3\
+\n#\n# IP-Address  Full-Qualified-Hostname  Short-Hostname\n#\n\
+127.0.0.1\tlocalhost\n::1\t\tlocalhost ipv6-localhost ipv6-loopback\n\
+fe00::0\t\tipv6-localnet\nff00::0\t\tipv6-mcastprefix\nff02::1\
+\t\tipv6-allnodes\nff02::2\t\tipv6-allrouters\nff02::3\t\t\
+ipv6-allhosts\n" >/mnt/etc/hosts
+if [ -n  "${domain_name}" ]; then
+  echo -en "${clientip}\t" >>/mnt/etc/hosts
+  for name in ${domain_name}; do
+    echo -en "${host_name}.${name} " >>/mnt/etc/hosts
+  done
+  echo -e "${host_name}" >>/mnt/etc/hosts
+else
+  echo -e "${clientip}\t${host_name}" >>/mnt/etc/hosts
+fi
+# set up domainname and resolving
+rm -rf /mnt/etc/resolv.conf
+test -n "${domain_name}" && \
+  echo -e "# /etc/resolv.conf - file generated by\n#\t$0:\n\
+#\t${date}\n#options timeout:1 attempts:1 rotate\n\
+search "${domain_name} >/mnt/etc/resolv.conf
+test -n "${domain_name_servers}" && {
+  for name in ${domain_name_servers}; do
+    echo nameserver ${name} >>/mnt/etc/resolv.conf;
+  done; }
+
+#############################################################################
+# run distro specific configuration function
+config_distro
+
+#############################################################################
+# basic (non network) services
+
+# at daemon - calling distro specific function config_atd
+config_atd
+
+# configuration of cron services - calling distro specific function
+# config_cron (runlevel links, directories, ...)
+config_cron
+
+# setup system log services - distro dependent function config_syslog
+config_syslog
+
+# acpi and powersave - distro dependent function config_acpi, these daemons
+# might require dbus
+config_acpi
+
+# configure udev
+config_udev
+
+# configure dbus - distro dependent function config_dreshal - handle
+# all stuff regarding dependent services like dbus, resmgr, hal ...
+# (check for runlevel scripts, passwd entries, directories ...)
+config_dreshal
+
+# configure automounter (should be moved to plugin)
+if [ "x$automnt" != "xno" ] ; then
+  # check if there is some user provided configuration (only auto.master is
+  # important) and skip automatic setup
+  if [ ! -f /rootfs/etc/auto.master ] ; then
+    if [ -d /mnt/misc ] ; then
+      echo -e "# /etc/auto.master - file generated by $0:\n\
+/misc\t/etc/auto.misc" >/mnt/etc/auto.master
+      echo -e "# /etc/auto.misc - file generated by $0:" >/mnt/etc/auto.misc
+    else
+      echo -e "# /etc/auto.master - file generated by $0:\n\
+/misc\t#/etc/auto.misc" >/mnt/etc/auto.master
+      echo -e "# /etc/auto.misc - file generated by $0:\nautomount for \
+removable devices is mostly deprecated, so /misc is not\nactivated in \
+auto.master." >/mnt/etc/auto.misc
+    fi
+    if [ -n "${automnt_src}" ] ; then
+      # local directory and home directory server from initialramfs-setup
+      [ -z "${automnt_dir}" ] && automnt_dir="/home"
+      # remove leading and trailing slash
+      automnt_dir=${automnt_dir#/}
+      automnt_dir=${automnt_dir%/}
+      test -d /${automnt_dir} || error "$scfg_erradir" nonfatal
+      amserv=$(uri_token $automnt_src server)
+      ampath=$(uri_token $automnt_src path)
+      amdirn=$(echo ${automnt_dir}|sed "s,/,_,g")
+      echo -e "/${automnt_dir}\t/etc/auto.${amdirn}\n" \
+        >> /mnt/etc/auto.master
+      echo -e "# /etc/auto.${amdirn} created by $0:\n" \
+        > /mnt/etc/auto.${amdirn}
+      # add '/' to path because uri_token removes any leading '/' (s. function)
+      echo -e "*\t-rsize=32768,wsize=32768,rw\t${amserv}:/${ampath}/&" \
+        >> /mnt/etc/auto.${amdirn}
+      # no tempfs needed if automounter operates on /home
+      [ "${automnt_dir}" = "home" ] && umount -t tmpfs /mnt/home 2>/dev/null
+      # portmapper is needed for remote NFS sources and local nfs directories
+      testmkd /mnt/var/lib/nfs/state
+      config_portmap
+    fi
+  fi
+  config_automount
+fi
+
+# configure print services / start requested printer daemon
+config_printer
+
+# configure bluetooth services
+#[ -s /etc/hwinfo.bt ] if existance of bt devices should play any role
+config_bt
+
+#############################################################################
+# network(ed) services
+
+if [ -n "$ntp_servers" ]; then
+  # rdate uses the time protocol (port 37 which is not the ntp standard port)
+  # thus not every standard ntp-server might offer this service)
+  ( rdate -s "$ntp_servers" 2>/dev/null || error "$scfg_rdate" nonfatal
+    hwclock -w ) &
+fi
+
+# network time service (ntp) configuration file
+if [ -n "$ntp_servers" -a ! -f /rootfs/etc/ntp.conf ]; then
+  echo -e "# /etc/ntp.conf - file generated by $0: \
+$date\n" >/mnt/etc/ntp.conf
+  for name in $ntp_servers; do
+    echo server $name >>/mnt/etc/ntp.conf
+  done
+fi
+# copy timezone file defined with language settings
+[ -z "$TZ" ] && TZ="$timezone"
+ln -snf /usr/share/zoneinfo/${TZ} /mnt/etc/localtime || \
+  error "$scfg_ntptz" nonfatal
+config_ntp
+
+# secure shell server - at the moment all clients share one "secret"
+# key or the key has to be regenerated on every bootup or fetched on
+# every bootup from somewhere
+config_sshd
+
+# simple network management protocol agent
+config_snmp
+
+# configure samba service
+config_samba
+
+#############################################################################
+# NIS (variable typically fetched via dhcp)
+# setup nis configuration if needed
+if [ "x$nis_domain" != "x" -a "x$nis_servers" != "x" ] ; then
+  echo $nis_domain >/mnt/etc/defaultdomain
+  echo -e "# /etc/yp.conf - file generated by $0:\n#\t\
+$date\n\nypserver "$nis_servers >/mnt/etc/yp.conf
+  config_nis
+fi
+
+#############################################################################
+# name service caching daemon if networked user database
+config_nscd
+
+#############################################################################
+# preparation of /tmp directory (partition 44, nfs scratch, ramdisk). there
+# might be the chance that we have a disk partition available, so wait for
+# completion of detection, setup process
+[ $DEBUGLEVEL -eq 8 ] && echo "** Waiting for /tmp completion at $(sysup)"
+waitfor /tmp/tmpready 40000
+[ $DEBUGLEVEL -eq 8 ] && echo "** Setup of /tmp completed at $(sysup)"
+# create some directories and correct permissions
+tmpisdisk=$(sed -n '/\/tmp/p' /tmp/fstab 2>/dev/null)
+# if there is no local disk partition for /tmp then try to mount a rw
+# scratch space (if defined in $scratch) and prepared on server
+if [ -n "$scratch" -a -z "$tmpisdisk" ] ; then
+  scrproto=$(uri_token $FILESRC prot)
+  scrpath=$(uri_token $FILESRC path)
+  testmkd /tmp/scratch
+  # exports have to be per client!!
+  case "$scrproto" in
+    nbd)
+      :
+    ;;
+    *)
+      tmpserv=$(uri_token $scratch server)
+      tmppath=$(uri_token $scratch path)
+      # hanging mount processes might stop further setup - timeout
+      # should be configured ...
+      # fsmount proto server path target options
+      fsmount nfs ${tmpserv} ${tmppath} /tmp/scratch \
+        "rw,intr,soft,timeo=2,nosuid" && {
+        if [ -d /tmp/scratch/${clientip} ] ; then
+          mv /tmp/scratch/${clientip} /tmp/scratch/${clientip}.totrash
+          rm -rf /tmp/scratch/${clientip}.totrash 2>/dev/null &
+        fi
+        testmkd /tmp/scratch/${clientip}
+        # no need for tempfs there ...
+        umount /mnt/tmp >/dev/null 2>&1
+        fsmount nfs ${tmpserv} ${tmppath} /mnt/tmp \
+          "rw,intr,soft,timeo=2,nosuid"; }
+    ;;
+  esac
+fi
+
+# script run timer
+[ $DEBUGLEVEL -eq 8 ] && echo "** SW setup finished at $(sysup)"
+
+# servconfig finished successfully
+echo "servconfig finished at $(sysup)" > /tmp/svcfg
-- 
cgit v1.2.3-55-g7522