From 6ad6d7707e893016e82eeb75f4f08131d12700e7 Mon Sep 17 00:00:00 2001
From: Sebastian Schmelzer
Date: Mon, 4 Oct 2010 17:42:02 +0200
Subject: remove uClibc stuff - part I

---
 src/initramfs/scripts/etc/functions      | 1034 ++++++++++++++++++++++++++++++
 src/initramfs/scripts/etc/ldap-functions |   75 +++
 src/initramfs/scripts/etc/messages       |  204 ++++++
 src/initramfs/scripts/etc/messages.de    |  215 +++++++
 4 files changed, 1528 insertions(+)
 create mode 100644 src/initramfs/scripts/etc/functions
 create mode 100644 src/initramfs/scripts/etc/ldap-functions
 create mode 100644 src/initramfs/scripts/etc/messages
 create mode 100644 src/initramfs/scripts/etc/messages.de

(limited to 'src/initramfs/scripts/etc')

diff --git a/src/initramfs/scripts/etc/functions b/src/initramfs/scripts/etc/functions
new file mode 100644
index 00000000..066d2756
--- /dev/null
+++ b/src/initramfs/scripts/etc/functions
@@ -0,0 +1,1034 @@
+# Copyright (c) 2003..2006 - RZ Uni Freiburg
+# Copyright (c) 2006..2009 - OpenSLX GmbH
+#
+# This program/file is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found at http://openslx.org
+#
+# Common functions file for the configuration of linux diskless clients
+# (included by init, hwautocfg, servconfig, ... within OpenSLX initialramfs)
+
+#############################################################################
+# set of empty dummy functions (loaded before real functions in the
+# distro specific files - to have no undeclared function in init, serv-
+# config, hwautocfg, ...)
+
+# distro specific funtion called at the beginning of init script
+preinit () {
+:
+}
+# distro specific funtion called at the end of init script
+postinit () {
+:
+}
+# distro specific general function called from servconfig script
+config_distro () {
+:
+}
+# setup netconsole
+config_netconsole () {
+:
+}
+
+#############################################################################
+# produce error message and if $2 is empty run (debug) shell
+error () {
+local e_msg="$1"
+# set LOGFILE if not defined
+[ -z "${LOGFILE}" ] && LOGFILE="/dev/null"
+# if nonfatal error else fatal error message and shell
+if [ -n "$2" ] ; then
+  [ "$DEBUGLEVEL" -ge 1 -a "$DEBUGLEVEL" != 8 ] && \
+    echo -e "${error_msg}${e_msg}${error_nfe}" >> ${LOGFILE}
+  [ "$DEBUGLEVEL" -gt 1 -a "$DEBUGLEVEL" != 8 ] && \
+    echo -e "${error_msg}${e_msg}${error_nfe}"
+  [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && usleep 10
+else
+  echo -e "${error_msg}${e_msg}${error_shell}"
+  /bin/sh
+  echo -n "Reboot now? [y] (nothing happens here at the moment)"
+  exec < /dev/console > /dev/console
+  #input="y"
+  #read input
+  #[ -z "$input" -o "$input" = "y" -o "$input" = "Y" ] && {
+  #  sleep 4
+  #  [ -f /proc/sysrq-trigger ] || mount -t proc none /proc
+  #  echo "b" > /proc/sysrq-trigger
+  #}
+fi
+}
+#############################################################################
+# system uptime for performance analysis
+sysup () {
+uptime=$(sed -e "s, .*,," /proc/uptime)
+echo "${uptime} s."
+# if start times are kept, a summary of runtimes would be possible too
+}
+#############################################################################
+# (re)generate dynamic linked libraries cache from /etc/ld.so.conf
+ldcfg () {
+[ -n "${ldsc}" ] && echo -e "$init_ldcfg" && ldconfig /tmp/ld.so.cache &
+}
+#############################################################################
+# URI interpreter $1 variable to interprete, $2 type of token to return
+# prot: tftp, http, nbd, ... server: IP or FQDN
+uri_token () {
+local var=$1
+local prot
+local rest
+local server
+local path
+local port
+local tmpval
+local query=""
+# first check if URI starts with prot:// - URI scheme
+if strinstr "://" "$1" ; then
+  prot=${var%://*}
+  rest=${var#*://}
+else
+  rest="$var"
+  prot=""
+fi
+# remove temporary '::' from path, since it conflicts with port specification
+# ticket #232
+if strinstr "::" "$rest" ; then
+  rest=$(echo $rest | sed -e 's,::,§§§§§,g')
+elif strinstr "\:\:" "$rest" ; then
+  rest=$(echo $rest | sed -e 's,\:\:,§§§§§,g')
+fi
+# get the server IP or name and port - URI authority
+# you get the path or other token without leading "/" - add it later if
+# needed (fixme: port might be broken)
+if strinstr ":" "$rest" ; then
+  server="${rest%:*}"
+  rest="${rest#*:}"
+  path="${rest#*/}"
+  port="${rest%/$path}"
+else
+  tmpval=$rest
+  rest="${rest#*/}"
+  server="$(echo $tmpval|sed 's,/.*,,')"
+  path="${tmpval#${server}}"
+  port=""
+fi
+# get path and query components - URI path, query
+if strinstr "\?" "$rest" ; then
+  path="${path%\?*}"
+  query="${rest#*\?}"
+fi
+# return the requested token
+case "$2" in
+  prot) echo "$prot" ;;
+  server) echo "$server" ;;
+  # add '::' again to path, remove duplicate "//"
+  path) echo "$path" | sed -e 's,§§§§§,\:\:,g;s,//,/,' ;;
+  port) echo "$port" ;;
+  query) echo "$query" ;;
+esac
+}
+#############################################################################
+# mounter for different file sources
+fsmount () {
+local proto=$1
+local server=$2
+local srcpath=$3
+local target=$4
+local mntopt=$5
+local transport
+testmkd ${target}
+case "${proto}" in
+  *nbd)
+    # TODO: to be filled in ...
+  ;;
+  lbdev)
+    # we expect the stuff on toplevel directory, filesystem type should be
+    # autodetected here ... (vmimgserv is blockdev here)
+    vmbdev=/dev/${server}
+    waitfor ${vmbdev} 20000
+    mount -o ro ${vmbdev} ${target} || error "$scfg_evmlm" nonfatal
+  ;;
+  nfs)
+    # we expect nfs mounts here ... check that nfs module is loaded before
+    cat /proc/filesystems | grep -q -E "[[:space:]]nfs" || \
+      { modprobe ${MODPRV} nfs 2>/dev/null || error "$error_nfsmod" nonfatal; }
+    for transport in tcp udp fail; do
+      [ $transport = "fail" ] && { error "$init_nfs" nonfatal;
+         noimg=yes; break;}
+       mount -n -t nfs -o ${mntopt},nolock,${transport} \
+         ${server}:${srcpath} ${target} && break
+    done
+  ;;
+  smb|cifs)
+    # cifs mounts might be problematic if accessed with superuser id
+    mount -n -o ${mntopt},user=guest,guest,file_mode=0755,dir_mode=0755 \
+      -t ${proto} //${server}${srcpath} ${target}
+    #d_mkrlscript entry boot.slx "/opt/openslx/uclib-rootfs/bin/mount -n \
+    #-o ${mntopt},guest,user=guest,file_mode=0755,dir_mode=0755 -t ${proto} \
+    #//${server}${srcpath} ${target#/mnt}"
+  ;;
+esac
+}
+#############################################################################
+# replace @@@serverip@@@ with real serverip. Allows the usage of a variable
+# for the server ip address (e.g. in machine-setup or kernel commandline)
+checkip ()
+{
+if [ "@@@serverip@@@" = "$1" -a -n "$serverip" ] ; then
+  echo $serverip
+else
+  echo $1
+fi
+}
+#############################################################################
+# replacement for which command to find executables inside stage4 rootfs
+binfinder()
+{
+local program="$1"
+local s4path
+local notfound=1
+for s4path in bin sbin usr/bin usr/sbin usr/local/bin \
+              usr/local/sbin usr/bin/X11; do
+  if [ -f "/mnt/$s4path/$program" ] && \
+     [ -x "/mnt/$s4path/$program" ]; then
+    printf '%s\n' "/$s4path/$program"
+    notfound=0
+    break
+  fi
+done
+return $notfound
+}
+#############################################################################
+# disk formatter and mounter. some proper error message output should be
+# added. It uses programs invoked from stage 4 root filesystem. First
+# argument is blockdev or file to be formatted, second mountpoint if not
+# /mnt/tmp (default)
+diskfm () {
+local target=$1
+local mntpnt=$2
+local fs
+local path
+[ -f /lib/ld-linux.so.2 ] || ln -s /mnt/lib/ld-linux.so.2 /lib/ld-linux.so.2
+for fs in xfs reiserfs ext2 ; do
+  if strinfile "$fs" /proc/filesystems || modprobe ${MODPRV} $fs ; then
+    unset $found
+    for path in /sbin /bin /usr/sbin /usr/bin ; do
+      if test -x /mnt/$path/mkfs.$fs ; then
+        found=yes
+        case mkfs.$fs in
+          mkfs.xfs)
+            fopt="-f"
+            mopt="-o noexec"
+          ;;
+          mkfs.ext2)
+            fopt="-Fq"
+            mopt="-o nocheck,noexec"
+          ;;
+          mkfs.reiserfs)
+            fopt="-f"
+            mopt="-o noexec"
+          ;;
+        esac
+        LD_LIBRARY_PATH=/mnt/lib /mnt/$path/mkfs.$fs $fopt $target \
+          >/dev/null 2>&1 #|| error
+        if [ -z $mntpnt ] ; then
+          umount /mnt/tmp 2>/dev/null
+          if mount -t $fs -n $mopt $target /mnt/tmp 2>/dev/null; then
+            return 0
+          else
+            mount -n -t tmpfs none /mnt/tmp
+          fi
+        else
+          testmkd $mntpnt
+          mount -t $fs -n -o loop $target $mntpnt 2>/dev/null
+          return 0
+        fi
+      fi
+    done
+    [ -z $found ] && continue
+  else break
+  fi
+done
+}
+
+#############################################################################
+# dhcp client function
+rundhcp ()
+{
+local vci="$1"
+# ensure the interface is up - might produce conflicts - nbd could fail!!
+# fixme: really needed?
+#  [ -n "$noipyet" ] && ip link set dev $nwif up
+[ -f /lib/modules/${KERNEL}/kernel/net/packet/af_packet.ko ] && \
+  modprobe ${MODPRV} af_packet   
+echo "Starting udhcpc for IP configuration"
+mkdir /var/lib/dhcp >/dev/null 2>&1
+[ -n $vci ] && vci="-V $vci"
+testmkd /usr/share/udhcpc
+ln -sf /bin/dhcpmkconfig /usr/share/udhcpc/default.script
+# see for options.c file in udhcp subdir of busybox for accepted "-O option"
+udhcpc -O nissrv -O nisdomain -t 8 -q $vci \
+  -s /usr/share/udhcpc/default.script -i $nwif 2>/dev/null
+}
+
+#############################################################################
+# function for retrieving configuration file (machine-setup) via tftp from a
+# predefined server or given source (file=tftp-server:/path via kernel
+# command line)
+unpack () {
+# $1 is  config file name to get, $2 IP of server to get file from
+local dst=$1
+if [ -s $dst ] ; then
+  # fixme: handle different types of packaging (gzip/bzip2)??
+  if ! tar -xpzf $dst 2> /tmp/ConfTGZ-tar-error ; then
+     cat /tmp/ConfTGZ-tar-error
+     error "$unpack_ConfTGZ" nonfatal
+     rm /tmp/ConfTGZ-tar-error
+  fi
+  [ "$DEBUGLEVEL" -le 2 -o "$DEBUGLEVEL" -eq 8  ] && rm $dst
+  return 0
+else
+  return 1
+fi
+}
+
+# tftp wrapper
+# usage tftp_get <path> <tftpdserver> [count]
+# count is optional - default is 3 - use -1 for indefinit 
+tftp_get () {
+  local file="$1"
+  local file_server="$2"
+  local download_successful=0
+  local countdown="$3"
+
+  if [ -z "$1" -o -z "$2" ]; then
+    [ $DEBUGLEVEL -ge 1 ] && \
+      echo "[tftp_get] Usage: tftp_get <path> <server> [count]" 
+    return 1;
+  fi
+
+  [ "$countdown" = "" ] && countdown=3
+
+  until [ $download_successful -eq 1 ]
+  do
+    if [ "$countdown" = "0" ]; then
+      [ $DEBUGLEVEL -ge 1 ] && \
+        echo "[tftp_get] download of \"$file\" from \"$file_server\" ... failed"
+      return 0;
+    fi
+    tftp -g -r $file -l /tmp/$(basename $file) $file_server
+    [ -s /tmp/$(basename $file) ] && download_successful=1
+    countdown=$(expr $countdown - 1)
+    usleep 200000
+  done
+  [ $DEBUGLEVEL -ge 1 ] && \
+    echo "[tftp_get] download of \"$file\" from \"$file_server\" ... successful"
+  return 0;
+}
+
+
+# wget wrapper
+# usage wget_get <path> <ftp/httpserver> [count]
+# count is optional - default is 3 - use -1 for indefinit 
+wget_get () {
+  local file="$1"
+  local file_server="$2"
+  local download_successful=0
+  local countdown="$3"
+
+  if [ -z "$1" -o -z "$2" ]; then
+    [ $DEBUGLEVEL -ge 1 ] && \
+      echo "[wget_get] Usage: wget_get <path> <server> [count]" 
+    return 1;
+  fi
+
+  [ "$countdown" = "" ] && countdown=3
+
+  until [ $download_successful -eq 1 ]
+  do
+    if [ "$countdown" = "0" ]; then
+      [ $DEBUGLEVEL -ge 1 ] && \
+        echo "[wget_get] download of \"$file\" from \"$file_server\" ... failed"
+      return 0;
+    fi
+    wget -q $file_server$file -O /tmp/$(basename $file)
+    [ -s /tmp/$(basename $file) ] && download_successful=1
+    countdown=$(expr $countdown - 1)
+    usleep 200000
+  done
+  [ $DEBUGLEVEL -ge 1 ] && \
+    echo "[wget_get] download of \"$file\" from \"$file_server\" ... successful"
+  return 0;
+}
+
+
+fileget () {
+# normally tftp would be used, alternatively use wget for ftp or http
+# if local device file is specified - mount and unmount after copying
+local cfgfile
+[ "x$fileprot" = "x" ] && fileprot=tftp
+if [ "x$filepath" != "x" ] ; then
+  cfgfile=${filepath}
+  [ "x$fileserv" = "x" ] && fileserv=$(checkip ${serverip})
+  # wait for dns if "fileserv" is a name and not lbd device
+  [ "$fileprot" != "lbd" ] && \
+    echo ${fileserv} | grep -qi [a-z] && waitfor /tmp/dhcp-done 10000
+  [ $DEBUGLEVEL -ge 1 ] && echo "fileget -  fileprot:$fileprot, filepath:\
+$filepath, fileserv:$fileserv" >>$LOGFILE
+  case "$fileprot" in
+   ftp|http)
+     wget_get $cfgfile $fileprot://$fileserv \
+      && { unpack /tmp/$(basename $cfgfile) && break; } 2>>$LOGFILE 
+   ;;
+   lbd)
+     local ldev=$fileserv
+     echo "Waiting for configuration file ${cfgfile} ...."
+     [ $DEBUGLEVEL -ge 1 ] && echo "fileget -  fileprot:$fileprot, filepath:\
+$filepath, fileserv:$fileserv" >>$LOGFILE
+     waitfor /mnt/${cfgfile} 10000
+     if [ -f /mnt/${cfgfile} ]; then
+       unpack /mnt/$cfgfile
+     else
+       error "$init_errlfg"
+     fi
+   ;;
+   *)
+     tftp_get $cfgfile $fileserv  \
+       && unpack /tmp/$(basename $cfgfile) 2>>$LOGFILE
+   ;;
+   esac
+else
+  # predefined value for OpenSLX environment; it is expected that this
+  # directory is just below the tftpboot (path to which the daemon is
+  # restricted to)
+  filepath="client-config"
+  [ "x$fileserv" = "x" ] && fileserv=$(checkip ${serverip})
+  [ $DEBUGLEVEL -ge 1 ] && echo "fileget - fileprot:$fileprot, filepath:\
+$filepath, fileserv:$fileserv" >>$LOGFILE
+  # try to get configuration files successively; start with distro client
+  # and try last distro default ...
+  mac=$(echo $macaddr|sed "s/:/-/g")
+  for cfgfile in ${filepath}/${SYSTEM_NAME}/01-$mac.tgz \
+                 ${filepath}/${SYSTEM_NAME}/default.tgz ; do
+    case "$fileprot" in
+      ftp|http)
+        wget $fileprot://$fileserv/$cfgfile -O /tmp/$(basename $cfgfile) \
+          2>>$LOGFILE && { unpack /tmp/$(basename $cfgfile) && break; }
+      ;;
+      tftp)
+        tftp_get $cfgfile $fileserv \
+          2>>$LOGFILE && { unpack /tmp/$(basename $cfgfile) && break; }
+      ;;
+    esac
+  done
+  echo -e "\n## Configuration via fileget from ${fileprot}://${fileserv}/\
+${cfgfile}\n# Hierarchy is distro client and as last distro/default" \
+    >>/tmp/confviafile
+fi
+cat /initramfs/machine-setup >>/tmp/confviafile 2>/dev/null || \
+  error "$nomachsetup"
+echo "fileget via $fileprot from $fileserv/$cfgfile finished" >/tmp/file-done
+[ $DEBUGLEVEL -ge 1 ] && echo "fileget from $cfgfile finished" >>$LOGFILE
+}
+
+#############################################################################
+# function for creating directories after testing of their existance avoids
+# to recreate directories in union mounts. If second and/or third parameters
+# are given check for permission patterns
+testmkd () {
+  test -d $1 || mkdir -p $1 >/dev/null 2>&1
+  [ $# -ge 2 ] && for i in "$2" "$3" ; do
+    echo "$i" | grep -q -E "^[0-9]{3,4}$" && chmod "$i" $1 >/dev/null 2>&1
+    echo "$i" | grep -q -E ":." && chown "$i" $1 >/dev/null 2>&1
+  done
+}
+
+#############################################################################
+# function for writing a syslog-ng.conf file. First parameter is absolute
+# destination (incl. /mnt prefix)
+# sysngwriter $dest $start_syslog
+sysngwriter () {
+local mysyslogngcfg=$1
+# logging servers might be specified in $log_servers (from e.g. dhcp)
+# fixme!? only first logserver from dhcp variable is used
+[ -n "$log_servers" ] && start_syslog="syslog://${log_servers% *}:514/udp"
+echo -e "# File written by $0 within InitRamFS\n\
+source src {\n\tfile(\"/proc/kmsg\");\n\
+\tunix-dgram(\"/dev/log\");\n\tinternal();\n};\ndestination console_all {\
+\n\tfile(\"/dev/tty10\");\n};" >$mysyslogngcfg
+case "$start_syslog" in
+  yes|Yes|YES)
+    echo -e "\nlog {\n\tsource(src);\n\tdestination(console_all);\n};" \
+      >>$mysyslogngcfg
+  ;;
+  file)
+    echo -e "destination allmessages {\n\tfile(\"/var/log/allmessages\");\n};\
+\nlog {\n\tsource(src); destination(allmessages);\n};" >>$mysyslogngcfg
+  ;;
+  *)
+    syslogsrv=$(uri_token $start_syslog server)
+    syslogport=$(uri_token $start_syslog port)
+    syslogprot=$(uri_token $start_syslog path)
+    [ -z ${syslogport} ] && syslogport=514
+    [ -z ${syslogprot} ] && syslogprot=udp
+    echo -e "destination loghost {\n\t${syslogprot}(\"${syslogsrv}\" \
+port(${syslogport}));\n};\nlog {\n\tsource(src);\n\tdestination(loghost);\n};"\
+      >>$mysyslogngcfg
+  ;;
+esac
+}
+
+#############################################################################
+# simple string in string search
+strinstr () {
+  case "$2" in *$1*) return 0;; esac
+  return 1
+}
+
+#############################################################################
+# simple string in file search, for the future grep should be used instead
+strinfile () {
+  case "$(cat $2)" in *$1*) return 0;; esac
+  return 1
+}
+
+#############################################################################
+# wait for a file to appear and stop after maxwait counts
+waitfor () {
+local file=$1
+local maxwait=$2
+local count=0
+[ -z $file ] && return 0
+[ -z $maxwait ] && maxwait=5000
+while [ ! -e $file ] ; do
+  usleep 1000 
+  count=$(($count + 1))
+  [ $count -gt $maxwait ] && return 1
+done
+return 0
+}
+
+#############################################################################
+# ldconfig is needed if rootfilesystem is composed of several parts. Search
+# for ldconfig and execute it (we expect ldconfig not to be a dynamically 
+# linked tool)
+# check that /mnt/etc/ld.so.conf is never lost
+ldconfig () {
+local cachefile="$1"
+for ldcfg in /mnt/sbin/ldconfig \
+             /mnt/bin/ldconfig \
+             /mnt/usr/sbin/ldconfig; do
+  test -x $ldcfg && {
+    $ldcfg -r /mnt -C $cachefile; break; }
+done
+echo "finished at $(sysup)" >/tmp/ldcfg
+}
+
+#############################################################################
+# base passwd/shadow, the standard user present in every system. All other
+# system users should be generated within the service function
+basepasswd () {
+# hack (see Ticket #206)
+root_pw="$1"
+# strip every line with userid between 500 and 99999 from the passwd
+# file
+sed '/^[a-zA-Z0-9]*:[a-zA-Z0-9]*:[1-9][0-9]\{3,4\}:/d;/^+:*/d;/^+$/d;
+  /^[a-zA-Z0-9]*:[a-zA-Z0-9]*:[5-9][0-9]\{2\}:/d' /mnt/etc/passwd \
+  >/tmp/newpasswd
+# and add user nobody again (is there a more elegant way?)
+sed -n -e '/nobody/p' /mnt/etc/passwd >>/tmp/newpasswd
+# create the shadow from passwd file
+echo -e "root:"${root_pw}":12958:0:10000::::" >/mnt/etc/shadow
+sed 's/:.*/:!:13078:0:99999:7:::/;/^root.*/d' /tmp/newpasswd \
+  >>/mnt/etc/shadow
+mv /tmp/newpasswd /mnt/etc/passwd
+chmod 0640 /mnt/etc/shadow
+}
+
+#############################################################################
+# wait for the completion of configuration file (machine-setup). It is
+# composed from different sources
+cfgcomplete () {
+waitfor /tmp/dhcp-done 10000 || error "$error_errdcfg" nonfatal
+waitfor /tmp/file-done 10000 || error "$error_errfcfg" nonfatal
+waitfor /tmp/ldap-done 10000 || error "$error_errlcfg" nonfatal
+# concatenate the different files now into the central config file, order
+# matters - ldap (not implemented yet) data has highest priority
+if ! test -f /tmp/cfgcomplete ; then
+  echo "## Stage3 configuration via initial/early /etc/initramfs-setup" \
+    >/etc/ext-initramfs-setup
+  for config in /etc/initramfs-setup /tmp/confviadhcp /tmp/confviafile \
+  	        /tmp/confvialdap
+    do test -f $config && cat $config >>/etc/ext-initramfs-setup
+  done
+# check again and replace @@@serverip@@@ and produce a final version for
+# stage4 (no much use, just debugging)
+sed "s,@@@serverip@@@,$serverip," -i /etc/ext-initramfs-setup
+. /etc/ext-initramfs-setup
+cp /etc/ext-initramfs-setup /mnt/etc/machine-setup
+mv /etc/ext-initramfs-setup /etc/initramfs-setup
+echo "config completed" >/tmp/cfgcomplete
+fi
+}
+
+#############################################################################
+# execute all shell scripts in the given init-hook folder
+runinithook () {
+local hook=$1
+echo "[openslx] run: $hook" > /dev/kmsg
+if [ -d /etc/init-hooks/$hook ]; then
+  for hook_script in /etc/init-hooks/$hook/*.sh; do
+    if [ -e $hook_script ]; then
+      /bin/init-wrapper $hook_script $DEBUGLEVEL
+      . /tmp/env/wrapper.env
+    fi
+  done
+fi
+}
+
+#############################################################################
+# localization simply derived from $language variable set in machine-setup or
+# other sources - mostly taken from knoppix
+localization () {
+country="$1"
+CONSOLE_FONT="lat9w-16.psfu"
+case "$country" in
+  # German version
+  de*)
+    COUNTRY="de"
+    LANG="de_DE.UTF-8"
+    KEYTABLE="de-latin1-nodeadkeys"
+    XKEYBOARD="de"
+    KDEKEYBOARD="de"
+    CHARSET="utf8"
+    KDEKEYBOARDS="us,fr"
+    TZ="Europe/Berlin"
+  ;;
+  # Belgian version
+  be*)
+    COUNTRY="be"
+    LANG="C"
+    KEYTABLE="be2-latin1"
+    XKEYBOARD="be"
+    KDEKEYBOARD="be"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="us,de,fr"
+    TZ="Europe/Brussels"
+  ;;
+  # Bulgarian version
+  bg*)
+    COUNTRY="bg"
+    LANG="bg_BG"
+    KEYTABLE="bg"
+    XKEYBOARD="bg"
+    KDEKEYBOARD="bg"
+    CHARSET="microsoft-cp1251"
+    KDEKEYBOARDS="us,de,fr"
+    TZ="Europe/Sofia"
+  ;;
+  # Switzerland (basically de with some modifications)
+  ch)
+    LANGUAGE="de"
+    COUNTRY="ch"
+    LANG="de_CH"
+    KEYTABLE="sg-latin1"
+    XKEYBOARD="de_CH"
+    KDEKEYBOARD="de_CH"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="de,us,fr"
+    TZ="Europe/Zurich"
+  ;;
+  # Simplified Chinese
+  cn)
+    COUNTRY="cn"
+    LANG="zh_CN.GB2312"
+    KEYTABLE="us"
+    XKEYBOARD="us"
+    KDEKEYBOARD="us"
+    CHARSET="gb2312.1980-0"
+    KDEKEYBOARDS="us,de,fr"
+    XMODIFIERS="@im=Chinput"
+    TZ="Asia/Shanghai"
+  ;;
+  # Czechoslovakia
+  cs|cz)
+    LANGUAGE="cs"
+    COUNTRY="cs"
+    LANG="cs_CZ.UTF-8"
+    KEYTABLE="cz-lat2"
+    XKEYBOARD="cs"
+    KDEKEYBOARD="cz"
+    CHARSET="iso8859-2"
+    KDEKEYBOARDS="us,de,fr"
+    TZ="Europe/Prague"
+    CONSOLE_FONT="iso02g"
+  ;;
+  # Denmark
+  dk|da)
+    COUNTRY="dk"
+    LANG="da_DK.UTF-8"
+    # Workaround: "dk" broken in gettext, use da:da_DK
+    LANGUAGE="da:da_DK"
+    KEYTABLE="dk"
+    XKEYBOARD="dk"
+    KDEKEYBOARD="dk"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="dk,de,us,fr"
+    TZ="Europe/Copenhagen"
+  ;;
+  es)
+  # Spain
+    COUNTRY="es.UTF-8"
+    LANG="es_ES"
+    KEYTABLE="es"
+    XKEYBOARD="es"
+    KDEKEYBOARD="es"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="de,us,fr"
+    TZ="Europe/Madrid"
+  ;;
+  # Finland
+  fi)
+    COUNTRY="fi"
+    LANG="fi_FI.UTF-8"
+    KEYTABLE="fi"
+    XKEYBOARD="fi"
+    KDEKEYBOARD="fi"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="us"
+    TZ="Europe/Helsinki"
+  ;;
+  # France
+  fr*)
+    COUNTRY="fr"
+    LANG="fr_FR.UTF-8"
+    KEYTABLE="fr"
+    XKEYBOARD="fr"
+    KDEKEYBOARD="fr"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="de,us"
+    TZ="Europe/Paris"
+  ;;
+  he|il)
+  # Hebrew version
+    LANGUAGE="he"
+    COUNTRY="il"
+    LANG="he_IL.UTF-8"
+    KEYTABLE="us"
+    XKEYBOARD="us"
+    KDEKEYBOARD="il"
+    CHARSET="iso8859-8"
+    KDEKEYBOARDS="us,fr,de"
+    TZ="Asia/Jerusalem"
+  ;;
+  # Ireland
+  ie)
+    COUNTRY="ie"
+    LANG="en_IE.UTF-8"
+    KEYTABLE="uk"
+    XKEYBOARD="uk"
+    KDEKEYBOARD="gb"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="us,de,es,fr,it"
+    TZ="Europe/Dublin"
+  ;;
+  # Italy
+  it)
+    COUNTRY="it"
+    LANG="it_IT.UTF-8"
+    KEYTABLE="it"
+    XKEYBOARD="it"
+    KDEKEYBOARD="it"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="fr,us,de"
+    TZ="Europe/Rome"
+  ;;
+  # Japan
+  ja)
+    COUNTRY="jp"
+    LANG="ja_JP.UTF-8"
+    LANGUAGE="ja"
+    KEYTABLE="us"
+    XKEYBOARD="us"
+    KDEKEYBOARD="us"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="fr,us,de"
+    TZ="Asia/Tokyo"
+  ;;
+  # The Netherlands
+  nl)
+    COUNTRY="nl"
+    LANG="nl_NL.UTF-8"
+    KEYTABLE="us"
+    XKEYBOARD="us"
+    KDEKEYBOARD="en_US"
+    CHARSET="iso8859-15"
+    KDEKEYBOARDS="nl,de,fr"
+    TZ="Europe/Amsterdam"
+  ;;
+  # Poland
+  pl)
+    COUNTRY="pl"
+    LANG="pl_PL.UTF-8"
+    KEYTABLE="pl"
+    XKEYBOARD="pl"
+    KDEKEYBOARD="pl"
+    CHARSET="iso8859-2"
+    KDEKEYBOARDS="de,us,fr"
+    TZ="Europe/Warsaw"
+    CONSOLE_FONT="iso02g"
+  ;;
+  # Russia
+  ru)
+    COUNTRY="ru"
+    LANG="ru_RU.UTF-8"
+    KEYTABLE="ru"
+    XKEYBOARD="ru"
+    KDEKEYBOARD="ru"
+    CHARSET="koi8-r"
+    CONSOLE_FONT="Cyr_a8x16"
+    KDEKEYBOARDS="de,us,fr"
+    TZ="Europe/Moscow"
+  ;;
+  # Slovakia
+  sk)
+    COUNTRY="sk"
+    LANG="sk_SK.UTF-8"
+    KEYTABLE="sk-qwerty"
+    XKEYBOARD="sk"
+    KDEKEYBOARD="sk"
+    CHARSET="iso8859-2"
+    KDEKEYBOARDS="us,de"
+    TZ="Europe/Bratislava"
+    CONSOLE_FONT="iso02g"
+  ;;
+  # Slovenia
+  sl)
+    LANGUAGE="sl"
+    COUNTRY="si"
+    LANG="sl_SI.UTF-8"
+    KEYTABLE="slovene"
+    XKEYBOARD="sl"
+    KDEKEYBOARD="si"
+    CHARSET="iso8859-2"
+    KDEKEYBOARDS="us,de"
+    TZ="Europe/Ljubljana"
+    CONSOLE_FONT="iso02g"
+  ;;
+  tr)
+# Turkish version (guessed)
+    COUNTRY="tr"
+    LANG="tr_TR.UTF-8"
+    KEYTABLE="tr_q-latin5"
+    XKEYBOARD="tr"
+    KDEKEYBOARD="tr"
+    CHARSET="iso8859-9"
+    KDEKEYBOARDS="us,de,fr"
+    TZ="Europe/Istanbul"
+  ;;
+  # Taiwan - Traditional Chinese version
+  tw)
+    COUNTRY="tw"
+    LANG="zh_TW.UTF-8"
+    LANGUAGE="zh_TW.Big5"
+    KEYTABLE="us"
+    XKEYBOARD="us"
+    KDEKEYBOARD="us"
+    CHARSET="iso8859-1"
+    KDEKEYBOARDS="us"
+    XMODIFIERS="@im=xcin"
+    TZ="Asia/Taipei"
+  ;;
+  # Great Britian
+  uk)
+    COUNTRY="uk"
+    LANG="en_GB.UTF-8"
+    LANGUAGE="en"
+    KEYTABLE="uk"
+    XKEYBOARD="uk"
+    KDEKEYBOARD="gb"
+    CHARSET="iso8859-1"
+    KDEKEYBOARDS="us"
+    TZ="Europe/London"
+  ;;
+  # US and default configuration
+  *)
+    LANGUAGE="us"
+    COUNTRY="us"
+    LANG="C"
+    KEYTABLE="us"
+    XKEYBOARD="us"
+    KDEKEYBOARD="us"
+    CHARSET="iso8859-1"
+    KDEKEYBOARDS="de,fr"
+    TZ="America/New_York"
+  ;;
+esac
+}
+
+#############################################################################
+# This function gets an uri or a comma separated list of uris as parameter.
+# It will then try to mount these uris and add them to the union at /
+include_in_fsroot_union () {
+  union_id=0 # used to have guarantee differing names for the unions mount point
+  union_type=$1
+  for ROOTFS in $(echo $2 |sed 's/,/ /g'); do
+    union_id=$(($union_id + 1))
+    srvproto=$(uri_token $ROOTFS prot)
+    case $srvproto in
+      nfs)
+        # activate kernel nfs if not present, nfsroot consists now of two
+        # different parts
+        root_path=$(uri_token $ROOTFS path)
+        nfsserver=$(uri_token $ROOTFS server)
+        mkdir -p /mnt/tmp/${root_path}_${union_id}
+        for proto in tcp udp fail; do
+          [ $proto = "fail" ] && { error "$scfg_nfs"; break; }
+          mount -n -t nfs -o ro,nolock,$proto $nfsserver:$root_path \
+            /mnt/tmp/${root_path}_${union_id} && break
+        done
+      ;;
+      *nbd)
+	echo "Not working yet"
+        nbdmod=$srvproto
+        # get settings for nbd-client, filesystem equals to path in URI
+        # notation
+        nbdhost=$(uri_token $ROOTFS server)
+        nbdport=$(uri_token $ROOTFS port)
+        nbdrfst=$(uri_token $ROOTFS path)
+        echo -e "(D)NBD $ROOTFS parsed to $srvproto - $nbdhost - \
+          $nbdport - $nbdrfst" >> /tmp/testlog
+        #FIXME: do mount
+      ;;
+      aoe)
+        echo "Not implemented yet"
+      ;;
+      iscsi)
+        echo "Not implemented yet"
+        #iscsiserver=$(uri_token $ROOTFS server)
+        #iscsiport=$(uri_token $ROOTFS port)
+        #iscsitarget=$(uri_token $ROOTFS path)
+      ;;
+    esac
+    if [ "X$union_type" == "XUnionFS" ]; then
+      [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && \
+        echo "Using unionctl to mount ${root_path}_${union_id} (type: \
+          $union_type)"
+      unionctl /mnt/ --add --after 1 --mode ro /mnt/tmp/${root_path}_${union_id}
+    elif [ "X$union_type" == "XAUFS" ]; then
+      # unionctl for aufs is a sh script needing tools not included in our
+      # initramfs
+      [ "$DEBUGLEVEL" -gt 2 -a "$DEBUGLEVEL" != 8 ] && \
+        echo "Using aufs-mount to mount ${root_path}_${union_id} (type: $union_type)"
+      mount -n -o remount,add:1:/mnt/tmp/${root_path}_${union_id}=ro none /mnt
+    else
+      error ${init_loadunions} nonfatal
+    fi
+  done
+}
+
+#############################################################################
+# dummy functions - avoid undefined functions in servconfig (functions are
+# normally overwritten by settings within distro-functions) - a file 
+# generated by mkdxsinitrd from <distro>/functions-default & ~-version
+
+# setup initial boot scripts (for most standard distributions, gentoo is to
+# be handled differently)
+initial_boot () {
+:
+}
+# function for udev configuration
+config_udev () {
+:
+}
+# function for ntp configuration
+config_ntp () {
+:
+}
+# function for afs
+config_afs () {
+:
+}
+# function for atd
+config_atd () {
+:
+}
+# function for configuration of cron services
+config_cron () {
+:
+}
+# syslog service
+config_syslog () {
+:
+}
+# secure shell service
+config_sshd () {
+:
+}
+# snmp agent for remote monitoring
+config_snmp () {
+:
+}
+# consolefont
+consolefont () {
+:
+}
+# acpi and powersave
+config_acpi () {
+:
+}
+# configure hal, dbus, resmgr and services like that
+config_dreshal () {
+:
+}
+# configure automounter, simple NFSv3 imports only
+config_automount () {
+:
+}
+# configure print services / start requested printer daemon
+config_printer () {
+:
+}
+# configure bluetooth services
+config_bt () {
+:
+}
+# create a compliant runlevel script, needed for boot.slx
+d_mkrlscript () {
+:
+}
+# start name service caching daemon
+config_nscd () {
+:
+}
+# configure automounter
+config_automount () {
+:
+}
+# configure samba service (not winbind, but nmbd, smbd)
+config_samba () {
+:
+}
+# start portmapper (needed at least for nfs and nis services)
+config_portmap () {
+:
+}
+# start nis/ypbind
+config_nis () {
+:
+}
+# configure nfsv4 stuff
+config_nfsv4 () {
+:
+}
+# configure keyboard layout
+keytable () {
+:
+}
+# set up localization like keytable, console
+dlocale () {
+:
+}
diff --git a/src/initramfs/scripts/etc/ldap-functions b/src/initramfs/scripts/etc/ldap-functions
new file mode 100644
index 00000000..d2b6753e
--- /dev/null
+++ b/src/initramfs/scripts/etc/ldap-functions
@@ -0,0 +1,75 @@
+#######################################################################
+# configuration via ldap
+# get_timeranges: helper function for ldapconf, retrieving timeranges
+# of machineconfig-objects under search base $1 (Host,Group,Default)
+get_timeranges(){
+trquery=`ldapsearch -x -H ldap://$ldapserver -b $1 -D $user -w $pwd -LLL \
+"(objectclass=machineconfig)" Timerange|sed -n '/Tim*/p'|sed 's/TimeRange: /#/'`
+}
+# matching_timerange: helper function for ldapconf to get "most 
+# specific timerange" matching actual time
+matching_timerange(){
+match=0
+lines=$[`echo $trquery | sed 's/#/\n#/g'|wc -l` -1]
+for ((i=0;i<$lines;i++)) ; do
+  timerange[$i]=`echo $trquery | cut -d "#" -f $[$i+2] | sed 's/ //g'`
+done
+while true ; do
+  for ((i=0;i<$lines;i++)) ; do
+    trday=`echo ${timerange[i]} | cut -d "_" -f 1`
+    trbegin=`echo ${timerange[i]} | cut -d "_" -f 2`
+    trend=`echo ${timerange[i]} | cut -d "_" -f 3`
+    if [ $trday == $wday ] && [ $trday != "X" ] && [ $trbegin != "X" ] && \
+        [ $trbegin -le $time ] && [ $time -le $trend ]; then
+      echo $wday $time "[D H H]match ->" ${timerange[i]}
+      tr=${timerange[i]}
+      match=1 && break
+    fi
+  done
+  if [ $match == 1 ] ; then break ; fi
+  for ((i=0;i<$lines;i++)) ; do
+    trday=`echo ${timerange[i]} | cut -d "_" -f 1`
+    trbegin=`echo ${timerange[i]} | cut -d "_" -f 2`
+    trend=`echo ${timerange[i]} | cut -d "_" -f 3`
+    if [ $trday == $wday ] && [ $trbegin == "X" ] && [ $trend == "X" ]; then
+        echo $wday $time "[D _ _]match ->" ${timerange[i]}
+      tr=${timerange[i]}
+      match=1 && break
+    fi
+  done
+  if [ $match == 1 ] ; then break ; fi
+  for ((i=0;i<$lines;i++)) ; do
+    trday=`echo ${timerange[i]} | cut -d "_" -f 1`
+    trbegin=`echo ${timerange[i]} | cut -d "_" -f 2`
+    trend=`echo ${timerange[i]} | cut -d "_" -f 3`
+    if [ $trday == "X" ] && [ $trbegin != "X" ] && [ $trbegin -le $time ] && \
+        [ $time -le $trend ]; then
+      echo $wday $time "[_ H H]match ->" ${timerange[i]}
+      tr=${timerange[i]}
+      match=1 && break
+    else
+      if [ ${timerange[$i]} == "X_X_X" ]; then
+        echo $wday $time "[_ _ _]match ->" ${timerange[i]}
+        tr="X_X_X" && match=1
+      else
+      match=0
+      fi
+    fi
+  done
+  if [ $match == 1 ] || [ $match == 0 ] ; then	break ; fi
+done
+}
+# get_machineconfig: helper function for ldapconf, writing machine
+# config data of one timerange $tr into file "tmp/confvialdap/$tr"
+get_machineconfig(){
+ldapsearch -x -H ldap://$ldapserver -b $1 -D $user -w $pwd -LLL \
+"(&(objectclass=machineconfig)(timerange=$tr))"|sed '/dn:/d'|sed '/ou=/d'|\
+sed '/dc=/d'|sed '/objectC*/d'|sed '/Tim*/d'|sed '/cn:/d'|sed '/desc*/d'|sed \
+'s/: /=/g'|sed 's/-/_/g' > tmp/confvialdap/$tr
+}
+
+ldapconf () {
+local ldapserver=$1
+error "$error_ldapcfg"
+echo "not implemented" > /tmp/ldap-done
+}
diff --git a/src/initramfs/scripts/etc/messages b/src/initramfs/scripts/etc/messages
new file mode 100644
index 00000000..ca66245d
--- /dev/null
+++ b/src/initramfs/scripts/etc/messages
@@ -0,0 +1,204 @@
+# Copyright (c) 2003 - 2006 - RZ Uni Freiburg
+# Copyright (c) 2006 - 2009 - OpenSLX GmbH
+#
+# This program/file is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found at http://openslx.org
+#
+# Messages file for all error and info messages generated during client
+# bootup (within initialramfs) for OpenSLX linux diskless clients version 5.
+# Fhis file contains the standard set of error messages.
+
+# messages from (slx) init
+init_errmsg="The functions file contains a lot of slx scripts \
+functionality. Without this\ninit script will not run."
+init_mff="The main $init_errmsg"
+init_dff="The distro $init_errmsg"
+init_sscf="The slx configuration variables could not be found. Please
+provide the slxconfig file."
+init_noeth="  Unable to configure the ethernet device (eth0). Please check \
+for an\n  appropriate kernel module."
+init_errip="  Unable to setup at \
+least basic functionality, because no IP configuration\n  available. You \
+might pass that information via kernel command line\n  through setting of \
+'ipappend 1' in pxelinux.cfg/* or just enable dhcp\n  or ldap. They are \
+enabled via tokens ('ldap' or 'dhcp') in kernel\n  command line."
+init_errldap="  Unable to setup at \
+least basic functionality, because no IP configuration\n  available. Please \
+beware - ldap works only in combination of either\n  ipappend or similar or \
+with dhcp!"
+init_errnwad="  Failed to load the network adaptor modules added via \
+slxconfig-demuxer\n  run. Please reconfigure the module list and add the \
+appropriate modules\n  without *.ko suffix."
+init_bootmac="  If you have more than one ethernet adaptor present in your \
+machine or using\n  a NVidia chipset then it would be advisable to switch on \
+passing of the\n  boot MAC address via kernel commandline (IPAPPEND=3) in \
+your PXElinux\n  configuration."
+init_nveth="  Your system uses a NVidia ethernet chip which might to fail to \
+get the\n  original MAC address assigned. Use IPAPPEND=3 in your PXElinux \
+configuration\n  to get the boot MAC address passed on."
+init_errdhcp="  Did not get complete IP \
+configuration via DHCP. You may want to add\n  a vendor code identifier \
+via kernel commandline (vci=VCI)."
+init_erripcfg="  Up to now no IP configuration is available. If there is any \
+local file config\n  the system may work locally."
+init_errbld="  Failed to load \
+module ${NBD}.ko. It is needed if you intend to use\n  network block \
+device (D)NBD for the client as root filesystem."
+init_nbdcl="  Failed to start the network block device client. Unable to \
+mount root\n  filesystem."
+init_nbddev="  For some reason the network block device /dev/${NBD}0 never \
+appeared.\n  You might want to check udev or your list of static device \
+files."
+init_dnbd2s="  After 100 retries, it was not possible to start the dnbd2 \
+service. Please\n  check that at least one server is available. You might \
+use the\n  /sys/block/vnbd0 interface for this."
+init_moddir="  The requested modules or firmware directory does not exist. \
+That could mean:\n\
+  * The kernel was updated but the demuxer was not run afterwards.\n\
+  * The mounted filesystem does not contain the modules directory at all.\n\
+  You might want to check the list of mounted filesystems and if /mnt is\n\
+  not empty run 'ls /mnt/lib/modules; ls /mnt/lib/firmware' to check."
+init_loadaufs="  Loading of AUFS and/or UnionFS failed - Either the module(s) \
+are not\n  present or do not match the running kernel. If you do not want to \
+see\n  this message add the token(s) 'noaufs'/'nounionfs' to your kernel \
+command\n  line or remove the modules from your kernel module directory."
+init_loadunions="  Stacking of directories failed, because UnionFS/AUFS is not \
+loaded."
+init_deselau="  You switched off AUFS and UnionFS via kernel commandline, thus \
+no module\n  was loaded, using traditional bind mounts."
+init_loadcow="  Loading of Copy On Write (COW - special block device) module \
+failed -\n  Either module is not present or module does not match the \
+running\n  kernel. If you do not want to see this message remove the token \
+'cowloop' from kernel command line."
+init_cownobld="  Loading of cow module is of no sense if no network/other block \
+device is used or\n  UnionFS/AUFS was specified as read write layer too. Remove \
+UnionFS/AUFS token from\n  kernel commandline if cowloop should be used instead."
+init_nfs="  Mount of root filesystem via NFS was requested via kernel command \
+line\n  but failed. There might be the following reasons for that:\n  \
+* No nfs.ko module could be loaded and no NFS support was present in the\n  \
+running kernel - see error messages above\n  \
+* You tried to mount from wrong server or path ($nfsroot)\n  \
+* No NFS server is running or you do not have permissions"
+init_ldcfg="  Starting ldconfig - normally switched off. Enable it via kernel \
+cmdline option\n  'noldsc'. You might have/want to add additional library \
+pathes to the\n  ld.so.conf file."
+init_errlog="  Unable to create the logfile configuration in \
+/etc/${D_SYSCONFDIR}. That\n  might indicate some severe error."
+init_fstab="  Failed to create /etc/fstab in the clients root filesystem. The\n\
+  noexistence of the file might produce some unexpected behaviour of\n\
+  mount commands."
+init_errldcfg="  For some reason the generation of ld.so.cache did not \
+finish in time."
+init_infldcfg="  You decided not to recreate \
+/etc/ld.so.cache file. That might cause errors\n  if libraries are installed \
+after this file was created on server."
+init_errlfg="  The ConfTGZ filesource was some local device which was not \
+mounted successfully.\n  Either the wrong device was given or the filesystem \
+is not known to the kernel."
+init_errloop="  The loopback mounting of the rootfs container failed. Either \
+the file is\n  not available, unreadable or problems with the filesystem \
+modules."
+init_errcfg="of this client did not finish in\n  time. You might check the \
+process list and list the modules loaded until\n  now."
+init_errhw="  For some reason the hardware autoconfig $init_errcfg"
+init_errxorg="  For some reason no xorg.conf appeared, check xconfig!" 
+init_errsw="  For some reason the software configuration  $init_errcfg"
+init_wait="  Waited $ticks ticks to unmount kernel module or firmware \
+directory ..."
+init_errumnt="  Unmount of the kernel modules directory \
+failed for some reason. Some\n  modprobe process still active!?"
+init_errsys="  Unmount of the kernel sys directory \
+failed for some\nreason.  You will get some error messages that some files \
+could not be\n  removed."
+init_runinit="  Could not execute run-init due to missing command or wrong\n  \
+parameters given."
+init_picfg="  The plugin configuration directory is missing. This could be due \
+to failed\n  config get process at the beginning of stage3 setup. Either \
+requested\n  configuration file is missing in ~/client-config/<system> or a \
+general\n  transmission error."
+
+# messages from functions
+error_msg="An error occured during execution of $0 script:\n\n"
+error_nfe="\n  -> This error is not fatal - continuing ...\n"
+error_shell="\n  -> Running shell for debugging purposes now ...\n"
+error_modload="Failed to load module "
+error_modnfs="needed for mounting rootfs"
+error_nodhcp="  You tried to configure system via dhcp, but no usable dhcp\n\
+  client could be found. Please check that you have some client from\n\
+  the following list installed: dhclient dhcpcd pump ipconfig."
+error_dhcp="  The following problems could produce that error:\n\
+  * The af_packet.ko module is either not loaded nor present in kernel.\n\
+  * No network device is present - either no module matching the hardware\n\
+    was loaded nor present in kernel.\n  You might want to run 'lsmod'."
+error_dhclient="  Fatal error occured while trying to run dhclient.\n\
+$error_dhcp"
+error_ldapcfg="  The configuration via ldap is not implemented yet."
+error_errdcfg="  Did not get any configuration data via dhcp until now ..."
+error_errfcfg="  Did not get any configuration data via tftp until now ..."
+error_errlcfg="  Did not get any configuration data via ldap until now ..."
+unpack_ConfTGZ="  Error during unpacking of the ConfTGZ archive.\nAre you sure \
+it is in proper format?"
+nomachsetup="  No machine-setup file found. You might not have gotten any \
+configuration\n  from your server. You could find that out by checking if \
+/initramfs and\n  /rootfs are present!"
+
+# messages from distro functions
+df_erritab="  The file /etc/inittab does not exist or is no regular one. It \
+is needed\n  for the bootup procedure to follow. If upstart is used instead no \
+inittab\n  is needed any more, but a proper configured events.d."
+df_errumod="    Failed to load the \"unix\" module. Problems with Hardware \
+detection\nwill probably arise."
+df_errserv="seems not to be installed or start script is\n  not available\
+so requesting the start of service make no sense. Please\n  disable service\
+or install the files/packages needed."
+df_errcron="  The cron start script $df_errserv" 
+df_errsysl="  The syslog start script $df_errserv"
+df_errsshd="  The sshd start script $df_errserv"
+df_erryp="  The NIS client $df_errserv"
+df_errpmap="  The portmapper $df_errserv"
+df_erramnt="  Automounter $df_errserv"
+df_errnsc="  Name Service caching deamon $df_errserv\n This service might \
+be useful to take load from a ldap user directory."
+df_errafsd="  No afs directory present."
+df_errafsn="  AFS client service is not available."
+df_errkbd="  No non-english keyboard and console settings are installed. \
+Please add\n  them to your stage1 to have them enabled."
+
+# messages from servconfig
+scfg_nfs="  Mount of some NFS source failed ..."
+scfg_rdate="  Your configured ntpserver does not offer time configuration \
+on port 37."
+scfg_ntptz="  No such timezone data file (needed for ntp time service \
+configuration)."
+scfg_evmlm="  Mounting of local device source for vmware directory failed \
+for some reason."
+scfg_vmdir="  For some reason the runvmware script is not available for \
+copying. That\n  could be the result of failed mount or simply missing \
+file on\n  server."
+scfg_vmchs="  The virtual machines lister/chooser is not available from \
+~/templates\n  directory. Thus no default k/gdm menu entry is created."
+scfg_erradir="  Only one directory level is allowed to hook up automounter \
+to and the\n  directory should exist (on the servers export) or should be \
+creatable\n  (e.g. because of UnionFS writeable root directory)."
+scfg_country="  No configuration for localization found in config file. \
+Using default\n  country setting '${D_DEFAULTCOUNTRY}' defined in $0."
+
+# messages from hwautocfg
+hcfg_hwsetup="  The X server configuration file generated by hwautocfg could \
+not\n  be found."
+gfx_msg="Please check your graphic adaptor settings ($hw_graphic)."
+hw_msg="  Please check your predefined monitor settings ($hw_monitor): \
+Automatic\n  configuration of display"
+hcfg_res="  $hwmsg resolution was attempted but not established. Using \
+default resolutions (defined in xconfig)"
+hcfg_hwsetup="  Expected information from hwsetup to appear in \
+/tmp/hwsetup.info.\n  Unable to configure parts of the systems hardware. \
+Please check that\n  hwsetup is properly installed and executable."
+hcfg_keyb="  No settings found for keyboard, using default of '${XKEYBOARD}' \
+defined\n  in $0."
+
diff --git a/src/initramfs/scripts/etc/messages.de b/src/initramfs/scripts/etc/messages.de
new file mode 100644
index 00000000..487332d7
--- /dev/null
+++ b/src/initramfs/scripts/etc/messages.de
@@ -0,0 +1,215 @@
+# Copyright (c) 2003 - 2006 - RZ Uni Freiburg
+# Copyright (c) 2006 - 2010 - OpenSLX GmbH
+#
+# This program/file is free software distributed under the GPL version 2.
+# See http://openslx.org/COPYING
+#
+# If you have any feedback please consult http://openslx.org/feedback and
+# send your feedback to feedback@openslx.org
+#
+# General information about OpenSLX can be found at http://openslx.org
+#
+# Messages file for all error and info messages generated during client
+# bootup (within initialramfs) for OpenSLX linux diskless clients version 5
+# this file could be used for localization of error messages.
+
+# messages from (slx) init / Fehlermeldungen des SLX init
+init_errmsg="  ,,functions''-Datei beinhaltet viele Funktionen \
+der SLX Skripte. Ohne diese\n  wird das Init-Skript nicht funktionieren."
+init_mff="  Die Haupt $init_errmsg"
+init_dff="  Die Distro $init_errmsg"
+init_sscf="  Die SLX Konfigurations-Variablen wurden nicht gefunden. 
+Bitte stellen Sie die\n  SLX Konfigurations-Datei zur Verfuegung."
+init_noeth="  Konnte die Netzwerk-Schnittstelle nicht konfigurieren (eth0).\
+ Bitte pruefen,\n  ob das geeignete kernel-Modul vorhanden ist."
+init_errip="  Konnte die Grund-Funktionalitaet nicht einrichten, \
+da keine IP-Konfigurationen\n  vorhanden sind. Sie koennten diese \
+Informationen ueber die Kernel-Command-Line\n  durch die Einstellung \
+'ipappend 1' in pxelinux.cfg/* oder ldap\n  aktivieren. Sie werden durch \
+Token ('ldap')  in den Kernel Start Optionen\n  eingeschaltet."
+init_errldap="  Konnte nicht wenigstens die Grund-Funktionalitaet einrichten, \
+da keine IP-Konfigurationen\n  vorhanden sind. Achtung - ldap arbeitet nur in \
+Kombination mit IPAPPEND (PXE)\n  o.ae. oder DHCP!"
+init_errnwad="  Konnte die Netzwerk-Adapter, die durch den slx/mkramfs bzw. \
+mkdxsinitrd-Aufruf definiert\n  wurden, nicht laden. Bitte erneut aufrufen \
+und die passenden Module auflisten\n  (ohne Endung .ko)."
+init_bootmac="  Es scheint mehr als eine Ethernet-Karte installiert und die \
+passenden\n  Kernel-Module geladen zu sein. Das kann fuer Probleme sorgen, da \
+evtl.\n  die nicht verbundene Netzwerkkarte als das erste Interface konfiguriert\
+ \n  wurde. Durch die Uebergabe der MAC Adresse des Bootdevices (IPAPPEND=3 in
+der PXElinux-Konfiguration) laesst sich dieses vermeiden."
+init_nveth="  Ihr System benutzt anscheinend eine NVidia-Netzwerkkarte. Hier \
+kann es\n  vorkommen, dass die MAC-Adresse nicht korrekt eingestellt wird. \
+Dieses laesst\n  sich durch die Uebergabe der MAC Adresse des Bootdevices \ 
+(IPAPPEND=3 in der PXElinux-Konfiguration) vermeiden."
+init_errdhcp="  Keine komplette IP-Konfiguration ueber DHCP bekommen. \
+Eventuell sollten Sie\n ueber die Kernel Start Optionen eine Hersteller Code \
+ID (vendor code identifier)\n  (VCI=vci) hinzufuegen."
+init_erripcfg="  Bis zu diesem Zeitpunkt konnte keine (gueltige) IP.\
+Konfiguration beschafft\n  werden. Die Maschine kann funktionieren, wenn \
+lokale Konfiguration per\n  Datei moeglich ist."
+init_errbld="  Konnte nicht das Modul ${NBD}.ko laden. Es wird gebraucht, \
+wenn Sie vorhaben, das\n  Netzwerk Block Geraet (network block device) (D)NBD \
+fuer den Klienten als Wurzel-Dateisystem zu verwenden."
+init_nbdcl="  Konnte den Network Block Geraete-Dienst nicht starten und damit \
+das Wurzel-Dateisystem\n  nicht einhaengen."
+init_nbddev="  Aus irgendeinem Grund ist /dev/${NBD}0 nie erschienen. Sie \
+sollten ihr udev-System\n  nach Listen von statischen Geraeten untersuchen."
+init_dnbd2s="  Nach 100 Versuchen konnte das dnbd2 Blockdevice keinen laufenden \
+Server finden.\n  Bitte ueberpruefen Sie die Erreichbarkeit."
+init_moddir="  Das angeforderte Modul- bzw. Firmware-Verzeichnis existiert \
+nicht. Das\n  koennte bedeuten:\n\
+  * Der Kernel wurde ausgetauscht/erneuert ohne einen neuen Aufruf \
+von slxmkramfs oder\n  mkdxsinitrd.\n  * Das eingehaengte Dateisystem \
+beinhaltet das Modul-Verzeichnis ueberhaupt nicht.\n    Sie sollten die Liste \
+der eingehaengten Dateisysteme pruefen und wenn /mnt\n    nicht leer ist, \
+'ls /mnt/lib/modules' ausfuehren."
+init_loadunions="  Stapeln mehrerer Verzeichnisse nicht moeglich, da kein \
+UnionFS/AUFS\n  Modul geladen ist."
+init_loadaufs="  Laden von AUFS/UnionFS schlug fehl - entweder das Modul ist \
+nicht vorhanden, oder\n  es passt nicht zum laufenden Kernel. Wenn Sie diese \
+Meldung nicht sehen\n  wollen, fügen Sie das Token 'noaufs'/'nounionfs' den \
+Kernel Start\n  Optionen hinzu oder loeschen Sie die Module."
+init_deselau="  Sie haben AUFS und UnionFS mittels Kernel-Commandline \
+ausgeschaltet, deshalb\n  wurde kein entsprechendes Kernel-Modul geladen."
+init_loadcow="  Laden von Copy On Write (COW - Spezielles Block Geraet) Modul \
+schlug fehl -\n  entweder das Modul nicht praesent oder es passt nicht zum \
+laufenden\n Kernel. Wenn Sie diese Meldung nicht sehen wollen, entfernen sie \
+das Token 'cowloop' aus den Kernel Start Optionen."
+init_loadufs="  Laden von UnionFS schlug fehl - entweder das Modul ist \
+nicht vorhanden, oder\n  es passt nicht zum laufenden Kernel. Wenn Sie diese \
+Meldung nicht mehr sehen\n  wollen, entfernen Sie das Token 'unionfs' von den \
+Kernel Start Optionen."
+init_cownonbd="  Laden des COW-Moduls ist sinnlos, wenn kein Netzwerk Block \
+Geraet benutzt wird oder\n  UnionFS als Lese- Schreib-Schicht spezifiziert \
+wurde. Entfernen Sie das UnionFS Token aus\n  den Kernel-Start-Optionen wenn \
+'cowloop' stattdessen verwendet werden soll."
+init_nfs="  Einhaengen des Wurzel Dateisystems ueber NFS wurde angefordert \
+durch die Kernel Start Optionen,\n  aber schlug fehl. Die folgenden Gruende \
+koennten verantwortlich sein:\n\
+  * Kein nfs.ko (und weitere dafuer benoetigte) Modul konnte geladen werden und \
+keine NFS Unterstuetzung war im\n  laufenden Kernel vorhanden - siehe \
+Fehlermeldungen darueber.\n\
+  * Sie versuchten, einen falschen Pfad einzuhaengen ($nfsroot).\n\
+  * Kein NFS-Server laeuft oder Sie haben nicht die Zugriffsberechtigungen auf \
+diesen."
+init_ldcfg="  Starte ldconfig - normalerweise ausgeschaltet. Wird mit der Kernel \
+Start Option\n  'noldsc' aktiviert. Eventuell sollten Sie zusaetzliche \
+Bibliothekspfade\n  zur ld.so.conf hinzufuegen."
+init_errlog="  Konnte die Log-Datei Konfiguration nicht anlegen in \
+/etc/${D_SYSCONFDIR}. Das\n  koennte auf schwerwiegende Fehler hindeuten."
+init_fstab="Das Erzeugen von /etc/fstab im Wurzel-Dateisystem des Clients \
+schlug fehl.\n  Die Abwesenheit dieser Datei koennte unvorhergesehenes Verhalten \
+der mount-Befehle\n  verursachen."
+init_errldcfg="  Aus irgendeinem Grund konnte die Erstellung von ld.so.cache \
+nicht rechtzeitig fertiggestellt\n  werden."
+init_infldcfg="  Sie entschieden sich, die Datei /etc/ld.so.cache nicht neu \
+zu erstellen. Das koennte Fehler verursachen\n  wenn Bibliotheken installiert \
+werden nachdem diese Datei auf dem Server erstellt wurde."
+init_errlfg="  Die ConfTGZ Quelle war ein lokales Device, welches nicht korrekt \
+eingebunden werden\n  konnte. Entweder wurde das falsche Device/Partition \
+angegeben oder das\n  Dateisystem ist dem Kernel nicht bekannt."
+init_errloop="  Der Loopback-Mounting des Rootfilesystem-Containers schlug \
+fehl. Entweder\n  die Datei existiert nicht, ist unlesbar oder es gibt \
+Probleme mit\n  den Filesystem-Modulen."
+init_errcfg="des Clients nicht rechtzeitig beendet\n  Sie sollten die Prozess \
+Liste pruefen und die Module, die bis zum jetzigen Zeitpunkt geladen wurden."
+init_errhw="  Aus irgendeinem Grund wurde die Hardware Auto-Konfiguration \
+$init_errcfg"
+init_errsw="  Aus irgendeinem Grund wurde die Software Konfiguration  $init_errcfg"
+init_wait="  Wartete $i Zeiteinheiten das Kernel-Modul- bzw. Firmware-Verzeichnis \
+auszuhaengen ..."
+init_errumnt="  Das Kernel Modul Verzeichnis auszuhaengen \
+scheiterte aus irgendeinem Grund. Sind einige\n  ,,modprobe'' noch aktiv!?"
+init_errsys="  Aushaengen des Kernel /sys Verzeichnisses schlug aus irgendeinem \
+Grund\n  fehl. Sie werden einige Fehlermeldungen bekommen,\
+\ndass einige Dateien nicht entfernt werden konnten."
+init_runinit="  Konnte switch_root/run-init nicht ausfuehren, wegen fehlender \
+Befehle\n  oder falsch angegebenen Parametern."
+init_picfg="  Das Plugin-Konfigurationsverzeichnis fehlt. Dieses könnte an einem \
+fehlgeschlagenen\n  holen der Client-Konfiguration liegen, weil entweder die \
+Datei nicht auf\n  dem Server verfuegbar ist oder der Transport nicht klappte."
+
+# messages from functions
+error_msg="Ein Fehler trat auf waehrend der Ausfuehrung des $0 Skripts:\n\n"
+error_nfe="\n  -> Dieser Fehler ist nicht schwerwiegend - setze fort ...\n"
+error_shell="\n  -> Fuehre Shell aus zum Debuggen ...\n"
+error_modload="Es schlug fehl, folgendes Modul zu laden:"
+error_modnfs="gebraucht zum einhaengen des Wurzel Dateisystems"
+error_nodhcp="  Sie versuchten ihr System mittels DHCP einzurichten, es wurde \
+aber kein brauchbarer DHCP\n  Client gefunden. Bitte pruefen Sie, ob sie einen \
+der folgenden Clients\n  installiert haben: dhclient dhcpcd pump udhcpc."
+error_dhcp="  Die folgenden Probleme koennten den Fehler verursachen:\n\
+  * Das af_packet.ko Modul ist weder geladen noch praesent im Kernel.\n\
+  * Kein Netzwerk Geraet ist praesent - weder ein passendes Modul\n\
+    wurde geladen noch ist praesent im laufenden Kernel.\n  Sie sollten \
+'lsmod' ausfuehren."
+error_dhclient="  Schwerer Fehler aufgetreten beim Aufrufen von dhclient.\n\
+$error_dhcp"
+error_ldapcfg="  Die Konfiguration via ldap ist noch nicht implementiert."
+error_errdcfg="  Bis jetzt noch keine Konfigurationsdaten bekommen via dhcp .."
+error_errfcfg="  Bis jetzt noch keine Konfigurationsdaten bekommen via tftp ..."
+error_errlcfg="  Bis jetzt noch keine Konfigurationsdaten bekommen via ldap ..."
+unpack_ConfTGZ="  Fehler beim entpacken des ConfTGZ.\nSind Sie sicher, dass es im \
+richtigen Format ist?"
+nomachsetup="  Die Datei machine-setup nicht gefunden. Es koennte sein, dass das \
+Konfigurations-\n  paket nicht erfolgreich vom Server beschafft wurde. Das \
+erkennen Sie daran,\n  dass die Verzeichnisse /initramfs, /rootfs angelegt \
+wurden. Ihr\n  OpenSLX Client wird deshalb nicht wie erwartet funktionieren."
+
+# messages from distro functions
+df_erritab="  Die Datei /etc/inittab existiert nicht oder ist keine regulaere. \
+\n  Sie wird fuer den Boot-Process benoetigt."
+df_errumod="    Das Laden des \"unix\" Moduls schlug fehl. \nWahrscheinlich \
+werden Probleme bei der Hardware-Erkennung auftreten."
+df_errserv="ist entweder nicht installiert oder das Start-Skript ist nicht \
+verfuegbar.\n  Deswegen macht der Start des Dienstes keinen Sinn. Bitte \
+deaktivieren Sie den Start\n  oder installieren Sie die benoetigten Dateien."
+df_errcron="  Das cron Start-Skript $df_errserv" 
+df_errsysl="  Das syslog Start-Skript $df_errserv"
+df_errsshd="  Das sshd Start-Skript $df_errserv"
+df_erryp="  Der NIS-Klient $df_errserv"
+df_errpmap="  Der Portmapper $df_errserv"
+df_erramnt="  Der Automounter $df_errserv"
+df_errnsc="  Der Name Service Zwischenspeicherungs Daemon $df_errserv\n  \
+Dieser Dienst koennte nuetzlich sein, um Daten von einem ldap Benutzer-\
+Verzeichnis zu bekommen."
+df_errafsd="  Kein AFS Verzeichnis erreichbar"
+df_errafsn="  Der AFS-Client Dienst ist nicht verfuegbar"
+df_errkbd="  Keine nicht-englische Tastatur und/oder Konsolenunterstuetzung \
+installiert.\n  Falls gewuenscht/benoetigt diese im Stage1 nachinstallieren!"
+
+# messages from servconfig
+scfg_nfs="  Das Einhaengen einer NFS Quelle schlug fehl..."
+scfg_ntptz="  Die Zeitzonen-Datei wurde nicht gefunden (gebraucht fuer die \
+NTP-Zeit Dienst Konfiguration)."
+scfg_evmlm="  Das Einbinden der lokalen Festplatte(npartition) des VMware-\
+Image-Verzeichnisses\n  schlug fehl."
+scfg_vmdir="  Aus irgendeinem Grund kann das runvmware Skript nicht \
+verfuegbar zu kopieren.\n  Das koennte das Ergebnis eines fehlgeschlagenen \
+Mount-Versuchs sein\n   oder die Datei fehlt auf dem Server."
+scfg_vmchs="  Das Auswahltool/menu fuer Virtuelle Machinen ist nicht im \
+~/templates\n  Verzeichnis vorhanden. Deshalb wurde kein Default KDM Menu \
+Eintrag erzeugt."
+scfg_erradir="  Es wird nur eine Verzeichnis-Ebene erlaubt, den Automounter \
+zu installieren und das\n  Verzeichnis sollte existieren (auf dem \
+Server-Export) oder sollte anlegbar sein\n  (z.B. durch UnionFS beschreibbares \
+Wurzel-Verzeichnis)."
+scfg_country="  Keine Konfiguration fuer die Lokalisierung gefunden in der \
+Konfigurations-Datei. Benutzer\n  Standard Laender-Einstellung \
+'${D_DEFAULTCOUNTRY}' definiert in $0."
+
+# messages from hwautocfg
+hcfg_hwsetup="  Die xserver-Konfigurations-Datei, erstellt von hwsetup, konnte \
+nicht\n  gefunden werden."
+gfx_msg="Bitte pruefen Sie ihre Grafik-Adapter-Einstellungen ($hw_graphic)."
+hw_msg="  Bitte pruefen Sie ihre vordefinierten Monitor-Einstellungen ($hw_monitor): \
+Automatische\n  Konfiguration des Bildschirms."
+hcfg_res="  $hwmsg Aufloesung wurde versucht aber nicht eingerichtet. Benutze \
+Standard-Aufloesungen (defined in xconfig)"
+hcfg_hwsetup="  Erwartete Informationen von hwsetup in \
+/tmp/hwsetup.info.\n  Teile des Systems koennen nicht eingerichtet werden. \
+Bitte pruefen, dass\n  hwsetup richtig installiert und ausfuehrbar ist."
+hcfg_keyb="  Keine Einstellungen fuer ihre Tastatur gefunden, verwende den \
+Standard-Wert '${XKEYBOARD}' definiert\n  in $0."
+
-- 
cgit v1.2.3-55-g7522