From 416ab8a37f1b07dc9f6c0fb3ff1a8ff2036510b5 Mon Sep 17 00:00:00 2001 From: Sebastian Schmelzer Date: Thu, 2 Sep 2010 17:50:49 +0200 Subject: change dir structure --- src/os-plugins/plugins/xen/OpenSLX/OSPlugin/xen.pm | 185 ++++++++++++++++++ src/os-plugins/plugins/xen/XX_xen.sh | 73 +++++++ src/os-plugins/plugins/xen/files/hvm.include | 209 +++++++++++++++++++++ src/os-plugins/plugins/xen/files/machine.include | 167 ++++++++++++++++ src/os-plugins/plugins/xen/files/run-virt.include | 157 ++++++++++++++++ .../xen/init-hooks/10-nw-if-config/xennet.sh | 4 + .../xen/init-hooks/20-nw-bridge-config/bridge.sh | 30 +++ 7 files changed, 825 insertions(+) create mode 100644 src/os-plugins/plugins/xen/OpenSLX/OSPlugin/xen.pm create mode 100644 src/os-plugins/plugins/xen/XX_xen.sh create mode 100644 src/os-plugins/plugins/xen/files/hvm.include create mode 100644 src/os-plugins/plugins/xen/files/machine.include create mode 100644 src/os-plugins/plugins/xen/files/run-virt.include create mode 100644 src/os-plugins/plugins/xen/init-hooks/10-nw-if-config/xennet.sh create mode 100755 src/os-plugins/plugins/xen/init-hooks/20-nw-bridge-config/bridge.sh (limited to 'src/os-plugins/plugins/xen') diff --git a/src/os-plugins/plugins/xen/OpenSLX/OSPlugin/xen.pm b/src/os-plugins/plugins/xen/OpenSLX/OSPlugin/xen.pm new file mode 100644 index 00000000..12331983 --- /dev/null +++ b/src/os-plugins/plugins/xen/OpenSLX/OSPlugin/xen.pm @@ -0,0 +1,185 @@ +# Copyright (c) 2010 - RZ Uni Freiburg +# Copyright (c) 2010 - OpenSLX GmbH +# +# This program is free software distributed under the GPL version 2. +# See http://openslx.org/COPYING +# +# If you have any feedback please consult http://openslx.org/feedback and +# send your suggestions, praise, or complaints to feedback@openslx.org +# +# General information about OpenSLX can be found at http://openslx.org/ +# ----------------------------------------------------------------------------- +# xen.pm +# - implementation of the 'xen' plugin +# ----------------------------------------------------------------------------- +package OpenSLX::OSPlugin::xen; + +use strict; +use warnings; + +use base qw(OpenSLX::OSPlugin::Base); + +use File::Path; + +use OpenSLX::Basics; +use OpenSLX::Utils; + +sub new +{ + my $class = shift; + + my $self = { + name => 'xen', + }; + + return bless $self, $class; +} + +sub getInfo +{ + my $self = shift; + + return { + description => unshiftHereDoc(<<' End-of-Here'), + Configures Xen diskless boot, no installation yet. + End-of-Here + precedence => 10, + }; +} + +sub getAttrInfo +{ + my $self = shift; + + return { + 'xen::active' => { + applies_to_systems => 1, + applies_to_clients => 1, + description => unshiftHereDoc(<<' End-of-Here'), + should the 'xen'-plugin be executed during boot? + End-of-Here + content_regex => qr{^(0|1)$}, + content_descr => '1 means active - 0 means inactive', + # set active to 0, later set specially created Xen system to 1 + default => '0', + }, + # attribute 'imagesrc' defines where we can find xen images + 'xen::imagesrc' => { + applies_to_systems => 1, + applies_to_clients => 1, + description => unshiftHereDoc(<<' End-of-Here'), + Where do we store our xen images? NFS? Filesystem? + End-of-Here + content_regex => qr{^(/|nfs://)}, + content_descr => 'local path or URI or "-" (unset)', + default => undef, + }, + # attribute 'tftpdir' defines TFTP dir for network boots /w NAT + 'xen::tftpdir' => { + applies_to_systems => 1, + applies_to_clients => 1, + description => unshiftHereDoc(<<' End-of-Here'), + Do you want to define a stage 4 TFTP dir for netwoork boots? + Needed to boot Xen via NFS, we only need the initramfs + Hint: Mount your TFTP ro via NFS to a local dir + End-of-Here + content_regex => qr{^(/)}, + content_descr => 'local path or "-" (unset)', + default => undef, + }, + }; +} + +sub installationPhase +{ + my $self = shift; + my $info = shift; + + $self->{pluginRepositoryPath} = $info->{'plugin-repo-path'}; + $self->{openslxBasePath} = $info->{'openslx-base-path'}; + + # Copy run-virt.include and template files to the appropriate place for + # inclusion in stage4 + my $pluginName = $self->{'name'}; + my $pluginBasePath = + "$self->{openslxBasePath}/lib/plugins/$pluginName/files"; + + foreach my $file ( qw( run-virt.include machine.include hvm.include ) ) { + copyFile("$pluginBasePath/$file", "$self->{pluginRepositoryPath}/"); + chmod 0644, "$self->{pluginRepositoryPath}/$file"; + } + + return; +} + +sub removalPhase +{ + my $self = shift; + my $info = shift; + + return; +} + +sub suggestAdditionalKernelModules +{ + my $self = shift; + my $makeInitRamFSEngine = shift; + + my @suggestedModules; + + # Xen needs bridge module, for guests xennet and maybe xenblk + # earlier versions needed netloop + push @suggestedModules, qw( bridge xennet xenblk ); + + return @suggestedModules; +} + +#sub _xenLabel +#{ +# # set label for each Xen system +# foreach my $info (@$systemInfos) { +# if ($info->{xen::active} eq 1) { +# my $label = $info->{label} || ''; +# if (!length($label) || $label eq $info->{name}) { +# if ($info->{name} =~ m{^(.+)::(.+)$}) { +# my $system = $1; +# my $exportType = $2; +# $label = $system . "-xen" . ' ' x (36-length($system)) +# . $exportType; +# } else { +# $label = $info->{name}; +# } +# } +# } +# $info->{pxeLabel} = $label; +# } +# return $info; #??? +#} + +#sub _xenBootEntry +#{ +# # Xen entries look different +# # Example: +# # KERNEL mboot.c32 vendor-os/xen.gz dom0_mem=128000 --- +# # vendor-os/vmlinuz-xen debug=3 --- vendor-os/initramfs-1 +# # TODO: versionsort oder per attr? +# if ($info->{xen::active} eq 1) { +# my $xenKernel = slxsystem(ls /boot/xen* | sort | tail -n 1); +# $append .= " file=$bootURI" if length($bootURI); +# $append .= " file=$tftpPrefix" if length($tftpPrefix); +# $append .= " $clientAppend"; +# $append .= " --- $pxePrefix$vendorOSName/$info->{'initramfs-name'}"; +# $slxLabels .= "LABEL openslx-$info->{'external-id'}-xen\n"; +# # $slxLabels .= $pxeDefault; +# $slxLabels .= "\tMENU LABEL ^$info->{pxeLabel}\n"; +# $slxLabels .= "\tKERNEL mboot.c32\n"; +# $slxLabels .= "\tAPPEND $pxePrefix$vendorOSName/$xenKernel"; +# # $slxLabels .= " dom0_mem=128000"; +# $slxLabels .= " --- $pxePrefix$vendorOSName/$kernelName"; +# $slxLabels .= " --- $append\n"; +# $slxLabels .= "\tIPAPPEND 3\n"; +# } +# return $slxLabels; +#} + +1; diff --git a/src/os-plugins/plugins/xen/XX_xen.sh b/src/os-plugins/plugins/xen/XX_xen.sh new file mode 100644 index 00000000..7dddeee0 --- /dev/null +++ b/src/os-plugins/plugins/xen/XX_xen.sh @@ -0,0 +1,73 @@ +# Copyright (c) 2010 - RZ Uni Freiburg +# Copyright (c) 2010 - OpenSLX GmbH +# +# This program/file is free software distributed under the GPL version 2. +# See http://openslx.org/COPYING +# +# If you have any feedback please consult http://openslx.org/feedback and +# send your feedback to feedback@openslx.org +# +# General information about OpenSLX can be found at http://openslx.org +# +# stage3 part of 'xen' plugin - the runlevel script +# +# script is included from init via the "." load function - thus it has all +# variables and functions available + +# include default directories +. /etc/openslx.conf + +CONFFILE=/initramfs/plugin-conf/xen.conf +PLUGINCONFDIR=/mnt/${OPENSLX_DEFAULT_CONFDIR}/plugins/xen +PLUGINDIR=/mnt/${OPENSLX_DEFAULT_DIR}/plugin-repo/xen +VIRTDIR=/mnt/${OPENSLX_DEFAULT_VIRTDIR}/xen + +# check if the configuration file is available +if [ -e ${CONFFILE} ]; then + + # load needed variables + . ${CONFFILE} + + # Test if this plugin is activated... more or less useless with the + # new plugin system + if [ $xen_active -ne 0 2>/dev/null ]; then + + [ $DEBUGLEVEL -gt 0 ] && echo "executing the 'xen' os-plugin ..."; + + # load general configuration + . /etc/initramfs-setup + + # get source of xen image server (get type, server and path) + if strinstr "/" "${xen_imagesrc}" ; then + vbimgprot=$(uri_token ${xen_imagesrc} prot) + vbimgserv=$(uri_token ${xen_imagesrc} server) + vbimgpath="$(uri_token ${xen_imagesrc} path)" + fi + if [ -n "${vbimgserv}" ] ; then + # directory where qemu images are expected in + mnttarget=${VIRTDIR} + # mount the xen image source readonly (ro) + fsmount ${vbimgprot} ${vbimgserv} ${vbimgpath} ${mnttarget} ro + else + [ $DEBUGLEVEL -gt 1 ] && \ + error " * Incomplete information in variable ${xen_imagesrc}." \ + nonfatal + fi + + # copy virtualization include files to config dir + testmkd ${PLUGINCONFDIR} + testmkd /mnt/var/log/xen + testmkd /mnt/var/run/xend + testmkd /mnt/var/run/xenstored + cp ${PLUGINDIR}/*.include ${PLUGINCONFDIR} + # copy ${CONFFILE} to ${PLUGINCONFDIR} just in case + cp ${CONFFILE} ${PLUGINCONFDIR} + + # activate init files + # TODO: in xen-slx start + # increase loop devices for loop images + modprobe -q loop max_loop=64 >/tmp/xen.log 2>&1 + rllinker "xendomains" 14 8 + rllinker "xend" 13 9 + fi +fi diff --git a/src/os-plugins/plugins/xen/files/hvm.include b/src/os-plugins/plugins/xen/files/hvm.include new file mode 100644 index 00000000..beb9315a --- /dev/null +++ b/src/os-plugins/plugins/xen/files/hvm.include @@ -0,0 +1,209 @@ +# This is an machine template for run-virt.include of the Xen plugin. +# This template was taken from an example in openSUSE 11.2 +# HVM template + +cat < 1 +#apic=1 + +# Enable/disable extended power management support within HVM guest, i.e., beyond +# S3, S4, S5 within guest like exposing battery meter. +# 0 (default option, extended power management support disabled) +# 1 (pass-through mode; uses pass-through as needed; efficient but limited in scope) +# 2 (non pass-through mode; extended scope, likely to work on all applicable environment +# but comparitively less efficient than pass-through mode) +# xen_extended_power_mgmt=0 + +# List of which CPUS this domain is allowed to use, default Xen picks +#cpus = "" # leave to Xen to pick +#cpus = "0" # all vcpus run on CPU0 +#cpus = "0-3,5,^1" # all vcpus run on cpus 0,2,3,5 +#cpus = ["2", "3"] # VCPU0 runs on CPU2, VCPU1 runs on CPU3 + +#---------------------------------------------------------------------------- +# Optionally define mac and/or bridge for the network interfaces. +# Random MACs are assigned if not given. +#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci' ] +# type=ioemu specify the NIC is an ioemu device not netfront +#vif = [ 'type=ioemu, bridge=xenbr0' ] +vif = [ '${xen_vif}' ] + +#---------------------------------------------------------------------------- +# Define the disk devices you want the domain to have access to, and +# what you want them accessible as. +# Each disk entry is of the form phy:UNAME,DEV,MODE +# where UNAME is the device, DEV is the device name the domain will see, +# and MODE is r for read-only, w for read-write. +#disk = [ 'phy:hda1,hda1,r' ] +#disk = [ 'file:/var/lib/xen/images/disk.img,ioemu:hda,w', ',hdc:cdrom,r' ] +disk = [ '${xen_disk}' ] + +#---------------------------------------------------------------------------- +# Configure the behaviour when a domain exits. There are three 'reasons' +# for a domain to stop: poweroff, reboot, and crash. For each of these you +# may specify: +# "destroy", meaning that the domain is cleaned up as normal; +# "restart", meaning that a new domain is started in place of the old +# one; +# "preserve", meaning that no clean-up is done until the domain is +# manually destroyed (using xm destroy, for example); or +# "rename-restart", meaning that the old domain is not cleaned up, but is +# renamed and a new domain started in its place. +# In the event a domain stops due to a crash, you have the additional options: +# "coredump-destroy", meaning dump the crashed domain's core and then destroy; +# "coredump-restart', meaning dump the crashed domain's core and the restart. +# The default is +# on_poweroff = 'destroy' +# on_reboot = 'restart' +# on_crash = 'restart' +#on_poweroff = 'destroy' +#on_reboot = 'restart' +#on_crash = 'restart' + +#============================================================================ +# HVM specific +#============================================================================ +# Device Model to be used +device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm' + +#----------------------------------------------------------------------------- +# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d) +# default: hard disk, cd-rom, floppy +#boot="cda" + +#----------------------------------------------------------------------------- +# write to temporary files instead of disk image files +#snapshot=1 + +#---------------------------------------------------------------------------- +# enable SDL library for graphics, default = 0 +sdl=0 + +#---------------------------------------------------------------------------- +# enable OpenGL for texture rendering inside the SDL window, default = 1 +# valid only if sdl is enabled. +opengl=1 + +#---------------------------------------------------------------------------- +# enable VNC library for graphics, default = 1 +vnc=1 + +#---------------------------------------------------------------------------- +# address that should be listened on for the VNC server if vnc is set. +# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp +#vnclisten="127.0.0.1" + +#---------------------------------------------------------------------------- +# set VNC display number, default = domid +#vncdisplay=1 + +#---------------------------------------------------------------------------- +# try to find an unused port for the VNC server, default = 1 +#vncunused=1 + +#---------------------------------------------------------------------------- +# set password for domain's VNC console +# default is depents on vncpasswd in xend-config.sxp +vncpasswd='' + +#---------------------------------------------------------------------------- +# no graphics, use serial port +#nographic=0 + +#---------------------------------------------------------------------------- +# enable stdvga, default = 0 (use cirrus logic device model) +stdvga=0 + +#----------------------------------------------------------------------------- +# serial port re-direct to pty deivce, /dev/pts/n +# then xm console or minicom can connect +serial='pty' + + +#----------------------------------------------------------------------------- +# Qemu Monitor, default is disable +# Use ctrl-alt-2 to connect +#monitor=1 + + +#----------------------------------------------------------------------------- +# enable sound card support, [sb16|es1370|all|..,..], default none +#soundhw='sb16' + + +#----------------------------------------------------------------------------- +# set the real time clock to local time [default=0 i.e. set to utc] +#localtime=1 + + +#----------------------------------------------------------------------------- +# set the real time clock offset in seconds [default=0 i.e. same as dom0] +#rtc_timeoffset=3600 + +#----------------------------------------------------------------------------- +# start in full screen +#full-screen=1 + + +#----------------------------------------------------------------------------- +# Enable USB support (specific devices specified at runtime through the +# monitor window) +#usb=1 +# Enable USB mouse support (only enable one of the following, `mouse' for +# PS/2 protocol relative mouse, `tablet' for +# absolute mouse) +#usbdevice='mouse' +#usbdevice='tablet' + +#----------------------------------------------------------------------------- +# Set keyboard layout, default is en-us keyboard. +#keymap='de' + +#----------------------------------------------------------------------------- +# Enable/disable xen platform PCI device, default=1 (enabled) +#xen_platform_pci=1 + +#============================================================================ +EOF diff --git a/src/os-plugins/plugins/xen/files/machine.include b/src/os-plugins/plugins/xen/files/machine.include new file mode 100644 index 00000000..06848949 --- /dev/null +++ b/src/os-plugins/plugins/xen/files/machine.include @@ -0,0 +1,167 @@ +# This is an machine template for run-virt.include of the Xen plugin. +# This template was taken from an example in openSUSE 11.2 + +cat </dev/null +# dir for configs +confdir="/tmp/${self}/${USER}/${VM_ID}" +# use vm_shortname for VM name since vm_name can be very long +# add id so we can start more tahn one of the same image +vm_name="${vm_shortname}-${VM_ID}" +conffile=${confdir}/${vm_name} +# define dirs and files which can be removed after exit, be carefull! +rm -rf ${confdir} 2>/dev/null +mkdir -p ${confdir} 2>/dev/null + +xen_kernel=${kernel:-"/boot/vmlinuz-xen"} +xen_ramdisk=${initramfs:-"/boot/initrd-xen"} +xen_extra="xencons=tty 3" +[ -n "${imgname}" ] && xen_disk="disk = [ 'file:${vmpath},hda1,r' ]" + +writelog "Directories:" +writelog "\tConfig dir:\t\t$confdir" + +################################################################################ +### Hardware checks +################################################################################ + +# memory part equal to vmware plugin +# percentage of memory to use for virtualbox in standard case +if [ -n "${forcemem}" ]; then + mem="${forcemem}" +else + permem=30 + if [ "${totalmem}" -ge "1600" ]; then + permem=40 + fi + # check if /tmp is on harddisk + if grep -qe "/dev/.* /tmp " /proc/mounts ; then + permem=60 + id44="1" + # Hack, if more than 2,5G RAM use 40% of Ram and write vmem into Ram as well + # (40% vmware | 40% confdir(vmem...) | 20% host + # VMplayer 2+ issue + # TODO: makes this sense for vbox? + #if [ "${totalmem}" -ge "2500" ]; then + #permem=40 + #rmdir ${snapshotdir} + #snapshotdirold=${snapshotdir} + #snapshotdir=/dev/shm/${self}/${USER}/${VM_ID} + #mkdir -p ${snapshotdir} + #ln -sf ${snapshotdir} ${snapshotdirold} + #fi + fi + mem=$(expr ${totalmem} / 100 \* ${permem}) + if [ "${id44}" = "1" ]; then + memhost=$(expr ${totalmem} - ${mem}) + else + memhost=$(expr ${totalmem} - ${mem} - ${mem}) + fi + #permem=40 + #mem=$(expr ${totalmem} * ${permem}) + if [ "${mem}" -lt "256" ] || [ "${memhost}" -lt "256" ]; then + writelog "Memory out of range: ${mem} MB (guest) / ${memhost} MB (host)!" + writelog "Min. 256 MB for host and guest!" + exit 1 + fi +fi + +# translate network kinds (nat, bridged, host-only) +case "${network_kind}" in + bridge*) + xen_vif="mac=$macaddr, bridge=br0" + ;; + *) + xen_vif="mac=$macaddr" +esac +xen_dhcp="dhcp" # off + +# translate boot, use if set else set to disk +xen_root=/dev/hda1 +case ${boot} in + n*|tftp) + pxe_label=$(grep -o 'pxe_label param=.*"' ${xmlfile} \ + | sed -e "s/&.*;/; /g" | awk -F '"' '{print $2}') + pxe_label=$(grep -A 3 "^LABEL *${pxe_label}" \ + ${xen_tftpdir}/pxelinux.cfg/default 2>/dev/null \ + | grep "^ *KERNEL ") + if [ -n "${pxe_label}" ] && [ -n "${xen_tftpdir}" ]; then + xen_root=/dev/nfs + xen_kernel="${xen_tftpdir}/$(echo ${pxe_label} \ + | awk -F " --- " '{print $2}' | awk '{print $1}')" + xen_ramdisk="${xen_tftpdir}/$(echo ${pxe_label} \ + | awk -F " --- " '{print $3}')" + fi + ;; + # later maybe c|disk|hd*|sd*) for HD and d|cd*) for CD-ROM + *) + xen_root=/dev/hda1 + ;; +esac + +[ ${diskless} -eq 0 ] && writelog "Diskimage:" +[ ${diskless} -eq 0 ] && writelog "\tMachine diskfile:\t$vmpath" +writelog "Virtual Hardware:" +writelog "\tGuest RAM:\t\t${mem} MB" +# echo nur wenn memhost gesetzt +[ -n "${memhost}" ] && writelog "\tHost RAM:\t\t${memhost} MB" +writelog "\tMAC address:\t\t$macaddr" + +################################################################################ +### Pepare and configure virtual machine and disk image +################################################################################ + +. ${PLUGINCONFXEN}/machine.include > ${conffile} + +################################################################################ +### finally set env for run-virt.sh +################################################################################ + +# set the variables appropriately (several interfaces with different names) +VIRTCMD=$(which xm 2>/dev/null) +# '-c' for console, no graphical output available, later vnc possible +VIRTCMDOPTS="create -c ${conffile}" + +# set headless mode +VIRTCMDHL=$(which xm 2>/dev/null) +VIRTCMDOPTSHL="create ${conffile}" diff --git a/src/os-plugins/plugins/xen/init-hooks/10-nw-if-config/xennet.sh b/src/os-plugins/plugins/xen/init-hooks/10-nw-if-config/xennet.sh new file mode 100644 index 00000000..d514b68d --- /dev/null +++ b/src/os-plugins/plugins/xen/init-hooks/10-nw-if-config/xennet.sh @@ -0,0 +1,4 @@ +# load xennet if necessary, usualy within a NFS VM +if grep -q "Xen Virtual Ethernet Card" /etc/hwinfo.netcard-usbctrl; then + modprobe xennet >/tmp/xennet.log 2>&1 +fi diff --git a/src/os-plugins/plugins/xen/init-hooks/20-nw-bridge-config/bridge.sh b/src/os-plugins/plugins/xen/init-hooks/20-nw-bridge-config/bridge.sh new file mode 100755 index 00000000..d5245234 --- /dev/null +++ b/src/os-plugins/plugins/xen/init-hooks/20-nw-bridge-config/bridge.sh @@ -0,0 +1,30 @@ +#!/bin/sh +# Copyright (c) 2009 - OpenSLX GmbH +# +# This program is free software distributed under the GPL version 2. +# See http://openslx.org/COPYING +# +# If you have any feedback please consult http://openslx.org/feedback and +# send your feedback to feedback@openslx.org +# +# General information about OpenSLX can be found at http://openslx.org +# +# Init hook to create a bridge on the active network interface +# (should be kept identical to the files of virtualbox and qemukvm plugins) +############################################################################# + +local bridge=br0 +local brnwif=${nwif} +local nwifmac=${macaddr} + +# bridge 0 already defined or some other problem +brctl addbr ${bridge} || exit 0 +brctl stp ${bridge} 0 +brctl setfd ${bridge} 0.000000000001 +ip link set addr ${nwifmac} ${bridge} +ip link set dev ${nwif} up +brctl addif ${bridge} ${nwif} + +# fixme: sending back the variable to init does not work properly at the +# moment +nwif=${bridge} -- cgit v1.2.3-55-g7522