#!/bin/sh # Copyright (c) 2003..2006 - RZ Uni Freiburg # Copyright (c) 2006..2011 - OpenSLX GmbH # # This program is free software distributed under the GPL version 2. # See http://openslx.org/COPYING # # If you have any feedback please consult http://openslx.org/feedback and # send your feedback to feedback@openslx.org # # General information about OpenSLX can be found at http://openslx.org # # Main script for initial ramfs for OpenSLX linux stateless clients ############################################################################# # fixme: the primary init script should never fail, so move all critical code # into sub script calls (see ticket 259) export PATH=/bin:/sbin:/usr/bin/:/usr/sbin # device files get their own filesystem (to be move mounted later) devdir="/dev" mount -n -t tmpfs -o 'size=25%,mode=0755' initramfsdevs ${devdir} mkdir -p /run mount -n -t tmpfs -o 'mode=755' run "/run" # mount the important standard directories [ ! -f /proc/cpuinfo ] && mount -n -t proc proc /proc [ ! -d /sys/class ] && mount -n -t sysfs sysfs /sys # create basic device files an directories (in dev - for most hardware related # devices mdev should handle that) for i in "/dev/mem c 1 1" "/dev/null c 1 3" "/dev/zero c 1 5" \ "/dev/urandom c 1 9" "/dev/kmsg c 1 11" "/dev/tty0 c 4 0" \ "/dev/tty1 c 4 1" "/dev/tty2 c 4 2" "/dev/tty3 c 4 3" \ "/dev/tty4 c 4 4" "/dev/tty5 c 4 5" "/dev/tty6 c 4 6" \ "/dev/tty7 c 4 7" "/dev/tty8 c 4 8" "/dev/tty9 c 4 9" \ "/dev/tty10 c 4 10" "/dev/tty c 5 0" "/dev/console c 5 1" \ "/dev/ptmx c 5 2" "/dev/psaux c 10 1" "/dev/agpgart c 10 175" \ "/dev/fb0 c 29 0" "/dev/xconsole p"; do mknod $i done mkdir -p ${devdir}/pts ${devdir}/shm ${devdir}/.udevdb ${devdir}/.udev \ ${devdir}/.initramfs /var/log # create some standard links (expected?) in /dev ln -s /proc/kcore /dev/core ln -s /proc/self/fd /dev/fd ln -s /proc/self/fd/0 /dev/stdin ln -s /proc/self/fd/1 /dev/stdout ln -s /proc/self/fd/2 /dev/stderr mount -t devpts devpts /dev/pts # redirect kernel messages to tty10 instead of the standard console getty -i -n -l /bin/cat 38400 tty10 & setlogcons 10 # start device auto discovery/setup service of busybox echo >/etc/mdev.conf mdev -s # source functions file common for all distros, messages contains all error # and info output (for some reason the error output is not produced properly # - crash) # how do the localization here? There is not yet a country-Variable . /etc/messages . /etc/functions || ( echo -e $init_mff && sleep 100 ) . /etc/distro-functions || ( echo -e $init_dff && sleep 100 ) # configuration settings for this slx system's environment . /etc/slxsystem.conf 2>/dev/null || ( echo -e ${init_sscf} && \ sleep 100 ) # initramfs-setup configuration (common initial settings for all clients using # a certain InitRamFS generated by slxconfig-demuxer) [ -f /etc/initramfs-setup ] && . /etc/initramfs-setup 2>/dev/null export date="${slxconf_date}" export DEBUGLEVEL=0 export KERNEL="${slxconf_kernver}" export NWMODULES="${slxconf_listnwmod}" export DISTRO_NAME="${slxconf_distro_name}" export DISTRO_VER="${slxconf_distro_ver}" export SYSTEM_NAME="${slxconf_system_name}" export SLXVERSION="${slxconf_slxver}" # do not use dnbd cache file nodnbdcache="yes" # set a default LAN interface, might be modified for WLAN, bridge setups or # on machines with more than one ethernet card built in export nwif="eth0" # load usb modules for keyboard (reenable usb keyboards, otherwise the # admin has to wait until second run of hwsetup late in stage3) and the # network adaptor modules, search for pci modules to load later on hwautocfg base # if no kernel version is set, try to get it directly from /proc if [ -z $KERNEL ] ; then KERNEL=$(cat /proc/version) KERNEL=${KERNEL#*version } KERNEL=${KERNEL% (*) (*} fi # set defaults for some important variables, might be overwritten via # kernel commandline tmpfssize="$(expr $(grep -i "memtotal" /proc/meminfo | awk '{print $2}') \ / 100 \* 75 - 128000)k" # in kbyte cowsize="50%" rwdir=/dev/shm nfsro="nfs" aufs=1 unionfs=1 fuse=1 runinithook '00-started' # run pre init script and user defined preinit.local, copied by mkdxsinitrd # from /var/lib/openslx/config/... in stage2 preinit [ -x /bin/preinit.local ] && /bin/preinit.local # switch off the several configuration methods, will be switched on # according to kernel commandline settings echo "noldap" > /tmp/ldap-done # external configuration file retrieval (per tftp) must be done, as otherwise # we will never get the initramfs-setup file. By default, we try a predefined # standard path (.../tftpboot/client-config/ ...) file="yes" # read kernel commandline read KCMDLINE < /proc/cmdline export KCMDLINE # read the system wide initramfs-setup and then the kernel commandline for opts in $(sed "s/#.*//" /etc/initramfs-setup) ${KCMDLINE} ; do case ${opts} in # shut down pc shutdown) cat </proc/sysrq-trigger ;; # from IPAPPEND BOOTIF=*) bootmac=$(echo ${opts} | sed "s/.*=01-//;s/-/:/g") ;; # localization country=*) COUNTRY=${opts#country=} grep -q -E "country=" /etc/initramfs-setup && echo -e "\n# localization information gotten via kernel command line \ in $0\ncountry=\"${COUNTRY}\"" >>/etc/initramfs-setup ;; # single token for debugging ... debug) DEBUGLEVEL=1 ;; # ... or a specified debug level debug=*) DEBUGLEVEL=${opts#debug=} if [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] ; then echo "** SLX init started near $(sysup)" elif [ $DEBUGLEVEL -ge 3 -a $DEBUGLEVEL -le 20 ] ; then # create, start a debug shell process echo "Debug shell started on second console (tty2)" echo -e "#!/bin/sh\nsh" >/bin/debugshell chmod u+x /bin/debugshell getty -i -n -l /bin/debugshell 38400 tty2 & # start logging (debuglevel >=3) # fixme: SuSE hangs in Creating /var/log/boot.msg if activated echo "Syslogd started on third console (tty3)" # just to have some name in syslog echo "(slx init)" >/proc/sys/kernel/hostname syslogd -C2048 klogd logread -f > /dev/tty3 2>/dev/null & logread -f >> /var/log/messages 2>/dev/null & fi ;; # if configuration should not be gathered by dhcp client nodhcp) nodhcp="yes" echo "nodhcp" >/tmp/dhcp-done ;; nofile) unset file echo "nofile" >/tmp/file-done ;; # if ldap configuration should be triggered ldap) ldap="yes" rm /tmp/ldap-done ;; # ldap configuration with host and port to contact (base) ldap=*) ldap="yes" rm /tmp/ldap-done ;; # file source with tftp server and file location on the server file=*|file) if [ "${opts}" != "file" ] ; then fileprot=$(uri_token ${opts#file=} prot) fileserv=$(uri_token ${opts#file=} server) filepath=$(uri_token ${opts#file=} path) fi ;; # if ld.so.cache should be generated; should be switched on when composing # rootfs from more than one source ldsc) ldsc="yes";; # simple union of base ro rootdir with tempfs on top nounionfs) unionfs=0;; # additional source to unify root filesystem with; the top layer will be # the tempfs unionfs=*) unionfs=1 uniondirs=${opts#unionfs=} # most probably it is a good idea to run ldconfig, so enable it ldsc="yes" ;; noldsc) ldsc="";; # same for AUFS; alternative to unionfs noaufs) aufs=0;; nofuse) fuse=0;; aufs=*) aufs=1 uniondirs=${opts#aufs=} # most probably it is a good idea to run ldconfig, so enable it ldsc="yes" ;; noldsc) ldsc="";; # if cowloop should be used, only ontop of network block device and in # combination with classical fs, like ext2 useful cowloop=*) cowloop=1 #cowsize=${opts#cowloop=} ;; # rootfs will void the variables (d)nbdroot, nfsroot ... # fixme: allow multiple rootfs sources to be unioned!? # if strinstr " " "$rootfs" ... rootfs=*) rootfs=${opts#rootfs=} rootfs=${rootfs#\"} rootfs=${rootfs%%\"} srvproto=$(uri_token $rootfs prot) case $srvproto in nfs) # nfsroot consists of two components nfspath=$(uri_token $rootfs path) nfsserver=$(uri_token $rootfs server) grep -q -E "nfsserver" /etc/initramfs-setup || \ echo -e "# nfs root information gotten via kernel command \ line in $0\nnfsserver=\"${nfsserver}\"\nnfspath=\"${nfspath}\"" \ >>/etc/initramfs-setup ;; *nbd*) bldmod=$srvproto # get settings for nbd-client, filesystem equals to path in URI # notation (remove leading slash from filesystem at the end) bldhost=$(uri_token $rootfs server) bldport=$(uri_token $rootfs port) path=$(uri_token $rootfs path) bldrfst=${path##*/} bldopt=${path%/*} bldopt=${bldopt#/*} ;; aoe) echo "Not implemented yet" bldmod= ;; iscsi) echo "Not implemented yet" bldmod= #iscsiserver=$(uri_token $rootfs server) #iscsiport=$(uri_token $rootfs port) #iscsitarget=$(uri_token $rootfs path) ;; lbd) # use a local device for mounting root block device with given # filesystem directly or a root filesystem container from another # filesystem, e.g. rootfs=lbd://sda1/squashfs (bldmod cannot be # empty, use loop or the real device stuff) bldmod=loop blddev=$(uri_token $rootfs server) bldfst=$(uri_token $rootfs path) bldfst=${bldfst#/*} ;; esac ;; # size of cache dnbd should use within ram dcsize=*) dnbdcachesize=${opts#dcsize=};; # ip configuration client-ip:server-ip:gateway:netmask ip=*) ipinfo=${opts#ip=};; # deprecated: nfs server and path (rewritten to standard style) nfsroot=*) srvproto=nfs nfsroot=${opts#nfsroot=} nfspath=${nfsroot#*:} nfsserver=${nfsroot%:/*} grep -q -E "nfsserver" /etc/initramfs-setup || \ echo -e "\n# nfs root information gotten via kernel command line \n\ in $0\n# deprecated: please use rootfs=nfs://...\nnfsserver=\"${nfsserver}\"\ \nnfspath=\"${nfspath}\"">> /etc/initramfs-setup ;; # size of tempfs if not max. 50% of RAM should be used tmpfssize=*) tmpfssize=${opts#tmpfssize=};; # vendor code identifier for dhcp requests, that way OpenSLX clients could # be distinguished from other (dhcp) clients vci=*) vci=${opts#vci=};; # option for ddcinfo ddcinfo=*) ddcinfo=${opts#ddcinfo=};; esac done runinithook '05-have-kernelvars' # at this point a timer should be started to ensure an automated reboot # or halt of the machine if SLX init does not succeed (e.g. missing kernel # module for the network adaptor) if [ ${DEBUGLEVEL} -lt 3 -o ${DEBUGLEVEL} = 8 ] ; then cat< /bin/watchdog #!/bin/sh echo \$$ > /tmp/watchdogpid [ ! -f /proc/version ] && mount -n -t proc proc /proc sleep 120 2> /dev/null echo "o" > /proc/sysrq-trigger EOF chmod u+x /bin/watchdog watchdog & fi # check if at least one type of IP configuration is availabe if [ -n "$nodhcp" -a -z "$ldap" -a -z "$ipinfo" -a $srvproto != "lbd" ] then echo -e "# You did not specify any advanced configuration mode for \ your clients. You\n# might want to add the token 'dhcp' for DHCP config, \ 'file(=source)'\n# for config file get via TFTP or 'ldap(=source)' for LDAP \ configuration to\n# your kernel command line." >> /etc/initramfs-setup if strinfile "clientip" /etc/initramfs-setup ; then # IP configuration seems to be present in initramfs-setup file # TODO: FIX this, as it will clobber all kernel-cmdline values! . /etc/initramfs-setup ipinfo="ip=$clientip:$serverip:$gateway:$subnet_mask" else error "$init_errip" fi fi # for ldap configuration at least basic IP setup is needed to contact the # server [ -n "$nodhcp" -a -n "$ldap" -a -z "$ipinfo" ] && error "$init_errldap" # set debug level and logfile if [ $DEBUGLEVEL -eq 20 ] ; then echo "** Setting debuglevel to ${DEBUGLEVEL} at $(sysup)" elif [ $DEBUGLEVEL -ne 0 ] ; then echo "Setting debuglevel to ${DEBUGLEVEL}" fi export MODPRV=" " export LOGFILE if [ "${DEBUGLEVEL}" -gt 0 -a "${DEBUGLEVEL}" != 8 ] ; then # set LOGFILE and move it later on into stage4 LOGFILE="/var/log/slx-boot.log" echo "Starting OpenSLX client boot logging at $(date)" >$LOGFILE echo "1 4 1 7" >/proc/sys/kernel/printk [ "${DEBUGLEVEL}" -ge 2 ] && MODPRV="-v" [ "${DEBUGLEVEL}" -gt 3 -a "${DEBUGLEVEL}" -le 10 ] && { set -x # and the kernel too echo "7 7 7 7" >/proc/sys/kernel/printk; } [ "${DEBUGLEVEL}" -gt 10 -a "${DEBUGLEVEL}" -le 20 ] && set +x else # switch off most of kernel debug output echo "0 0 0 0" >/proc/sys/kernel/printk # modprobe should stay quiet MODPRV="-q" LOGFILE="/dev/null" fi runinithook '10-nw-if-config' # check for multiple ethernet interfaces (we have at least the mac of PXE boot # device in $bootmac) # check here for the active ethernet link (skip non-ethN interfaces) if strinstr "eth" "$nwif" ; then for ethif in eth0 eth1 eth2 eth3 ; do export macaddr=$(ip link show dev $ethif 2>/dev/null | \ grep -i link.ether | awk '{print $2}') # if there is no bootmac present in kernel commandline any checks are # useless if [ -z "$bootmac" ] ; then bootmac="$macaddr" [ "$ethif" != "eth0" ] && error "$init_bootmac" nonfatal fi if [ "$macaddr" = "$bootmac" ] ; then nwif=$ethif break elif [ "x$macaddr" = "x" ] ; then # if the macaddr is empty on the first interface tried, there is no # network adaptor visible (missing kernel module) if [ "$ethif" = "eth0" ] ; then error "$init_errnwad" else # assume a forcedeth problem here (nonmatching MACs) macaddr=${bootmac} fi break fi done fi # quickfix for proper nwif passing ... (to be fixed in a more general way) sed "s/nwif=.*/nwif=\"${nwif}\"/" -i /tmp/env/wrapper.env oldnwif=$nwif # hook to setup bridging (several virtualization tools ... runinithook '20-nw-bridge-config' # set up loopback networking [ $DEBUGLEVEL -eq 20 ] && echo "** starting ip config at $(sysup)" ip link set dev lo up 2>/dev/null ip addr add 127.0.0.1/8 dev lo 2>/dev/null ip link set dev $nwif up 2>/dev/null || error "$init_noeth" # analyze ip information from the kernel command line and put parts # of it into several variables if [ -n "$ipinfo" ] ; then getip () { local val="$ipinfo:"; i=$(($1 - 1)); while [ $i -gt 0 ] ; do val=${val#*:} ; i=$(($i - 1)); done; echo $val|sed "s/:.*//"; } clientip=$(getip 1) serverip=$(getip 2) gateway=$(getip 3) subnet_mask=$(getip 4) broadcast_address=$(ipcalc -s -b $clientip $subnet_mask|sed s/.*=//) [ -z "$broadcast_address" ] && broadcast_address=255.255.255.255 # we might have an idea of the dns server via preboot dns_srv=$(getip 5) [ -n "$dns_srv" ] && echo nameserver $dns_srv >/etc/resolv.conf; echo -e "# ip configuration written by $0 script:\nclientip=$clientip\n\ subnet_mask=$subnet_mask\ngateway=$gateway\nserverip=$serverip\n\ broadcast_address=$broadcast_address" >>/etc/initramfs-setup # set static ip address ip addr add $clientip/$(ipcalc -s -p $clientip $subnet_mask|sed s/.*=//) \ broadcast $broadcast_address dev $nwif 2>/dev/null ip route add default via $gateway 2>/dev/null else noipyet="yes" fi # get configuration data via dhcp (with vendor code identifier if present # in ${vci} from kernel command line or initramfs-setup) ... if [ -z "$nodhcp" ] ; then ( rundhcp ${vci}; echo "dhcp finished at $(sysup)" >/tmp/dhcp-done ) & if [ -n "$noipyet" ] ; then waitfor /tmp/dhcp-done 20000 . /tmp/confviadhcp # by now there should be a proper ip configuration present if [ -z "$clientip" -o -z "$subnet_mask" -o -z "$broadcast_address" ] then error "$init_errdhcp" else { ip addr add \ $clientip/$(ipcalc -s -p $clientip $subnet_mask|sed s/.*=//) \ broadcast $broadcast_address dev $nwif 2>/dev/null || \ error "$init_erripcfg"; } # if gateway is available set it [ -n $gateway ] && ip route add default via $gateway 2>/dev/null fi # fixme: to be checked!! # else # if [ -n "$file" -a "$srvproto" = "lbd" ] ; then # error "$init_erripcfg" nonfatal # else # error "$init_erripcfg" # fi # fi fi fi # check if serverip is set as variable @@@serverip@@@ sed "s,@@@serverip@@@,$serverip," -i /etc/initramfs-setup [ $DEBUGLEVEL -eq 20 ] && echo "** finished ip config at $(sysup)" # on some network adaptors we need to wait for the link to come up dmesg | grep -q "link down" && for i in 1 1 1 1 ; do dmesg | grep -q "link up" && break [ $DEBUGLEVEL -ge 1 ] && echo "network: waited half a second for the \ link to come up" >>$LOGFILE sleep $i done # ... or ldap if available (in background) [ -n "$ldap" ] && ldapconf & # ... or via (t)ftp/http file get (in background) [ -n "$file" ] && fileget & runinithook '25-have-ip-config' ## netconsole is disabled in the default config # config_netconsole $clientip $oldnwif $nwif $serverip # if root filesystem should be imported via local or a network block device if [ -n "${bldmod}" ] ; then # load block device driver(s) if needed for module in ${bldmod} ; do modprobe ${MODPRV} ${module} || error "$init_errbld" done mdev -s [ -z "$bldrfst" ] && bldrfst=squashfs bldhost=$(checkip $bldhost) if [ $DEBUGLEVEL -eq 20 ] ; then echo "** starting setup of ${bldmod} at $(sysup)" else echo "Stateless client using ${bldmod} on $bldhost:$bldport with $bldrfst" fi # fixme: check for fs in /proc/filesystems before trying to load the module modprobe ${MODPRV} ${bldrfst} || error "$init_errbld" nonfatal # for debugging: interface might not be properly up - check reachability [ $DEBUGLEVEL -ge 1 ] && ping -c 1 -w 15 ${bldhost} >/dev/null 2>&1 case "${srvproto}" in # network block device present in standard kernel nbd) RDEV=/dev/nbd0 waitfor "${RDEV}" 20000 || error "$init_nbddev" i=0 # QUICKFIX: busybox version doesn't support "-persist" yet # but default behaviour is comparable # OLD CMD: while ! nbd-client $bldhost $bldport ${RDEV} -persist ; do while ! nbd-client $bldhost $bldport ${RDEV} ; do usleep 100000 i=$(($i + 1)) if [ $i -ge 1000 ] ; then error "$init_nbds"; break fi done usleep 100 echo deadline > /sys/block/nbd0/queue/scheduler # echo "32" > /sys/block/nbd0/queue/read_ahead_kb ;; # dnbd3 by Johann Latocha dnbd3) RDEV=/dev/dnbd0 waitfor "${RDEV}" 20000 || error "$init_nbddev" i=0 vid=${bldopt%/*} rid=${bldopt#*/} echo "blkopt: $bldopt" echo "vid: $vid" echo "rid: $rid" [ "x" == "x$bldport" ] || bldporrt="-p $bldport" tryagain=1 while [ "x$tryagain" == "x1" ] ; do dnbd3-client -h $bldhost $bldport -d ${RDEV} -v $vid -r $rid usleep 10000 if [ "$(cat /sys/block/dnbd0/net/cur_server_ip)x" != "x" ]; then tryagain=0 else echo -n "retry: " fi done sleep 1 ;; # dnbd2 by Vito Di Leo dnbd2) RDEV=/dev/vnbd0 waitfor "${RDEV}" 20000 || error "$init_nbddev" # quickhack, should be read in from URI echo 1 > /sys/block/vnbd0/config/vid echo 1 > /sys/block/vnbd0/config/rid # check for others in initramfs-setup and then kernel cmdline rootfs="$(sed -n "/rootfs=/p" /etc/initramfs-setup| \ sed "s,rootfs=,,;s,\",,g") " [ "$rootfs" = " " ] && \ rootfs="$(cat /proc/cmdline|sed "s,.*rootfs=\",,;s,\".*,,") " i=0 # assume no more than 16 different dnbd2 servers (default 4) while [ "x$bldhost" != "x" -a $i -lt 16 ]; do #echo "I: $i R: $rootfs P:$bldport H:$bldhost" echo $bldhost $bldport > /sys/block/vnbd0/server${i}/sock i=$(($i + 1)) rootfs=${rootfs#* } bldsp=$(echo ${rootfs}|sed "s, .*,,") bldhost=$(uri_token $bldsp server) bldport=$(uri_token $bldsp port) done # the cfq scheduler seem not a good idea here echo deadline > /sys/block/vnbd0/queue/scheduler # needed for some reason to settle initialization sleep 1 i=0 while [ $(cat /sys/block/vnbd0/config/running) != 1 ] ; do usleep 100000 echo 1 > /sys/block/vnbd0/config/running i=$(($i + 1)) if [ $i -ge 50 ] ; then error "$init_dnbd2s"; break fi done echo "64" > /sys/block/vnbd0/queue/read_ahead_kb ;; # dnbd by Thorsten Zitterell dnbd) # quickhack RDEV=/dev/dnbd0 if [ -z $nodnbdcache ] ; then # variable not really used yet mkdir /dnbd mount -n -o 'size=20%' -t tmpfs tmpfs /dnbd ( cat /dev/zero > /dnbd/cache 2>/dev/null || echo "ok" >/tmp/cache ) & clientopt="-c /dnbd/cache" waitfor /tmp/cache 10000 fi [ $(echo $bldhost|sed "s,\..*,,") -ge 224 ] && \ ip route add 224.0.0.0/4 dev $nwif waitfor /dev/dnbd0 10000 || error "$init_nbddev" echo "dnbd-client -b $bldhost -d $RDEV $clientopt" while ! dnbd-client -b $bldhost -d $RDEV $clientopt ; do usleep 10000 done # problem with squashfs and cfq scheduler echo noop > /sys/block/dnbd0/queue/scheduler echo 0 > /sys/block/dnbd0/queue/read_ahead_kb ;; lbd) # using clients local block device (disk partition is to be specified RDEV=/dev/$blddev echo "$bldrfst" >>/etc/filesystems realbldrfst=$bldrfst # we might need to mount the base layer filesystem first before accessing # e.g. a squashfs container file on it bldrfst=auto ;; esac RWRO="ro" if [ -n "${cowloop}" -a -x /bin/cowdev ] ; then modprobe ${MODPRV} cowloop || { error "$init_loadcow" nonfatal unset cowloop; } [ -x /bin/mdev ] && mdev -s fi if [ -n "${cowloop}" ] ; then if [ -n "${unionfs}" -o -n "${aufs}" ] ; then error "$init_cownobld" unset unionfs aufs fi echo "Using Copy-on-Write block device for rw access" mount -n -t tmpfs -o size=${cowsize} ramfs ${rwdir} mkdir /dev/cow && mknod /dev/cow/ctl b 241 255 usleep 200 ln -s /dev/cowloop0 /dev/cow/0 # fixme - cowdev depending on blockdev choosen above ... cowdev -a /dev/nbd0 ${rwdir}/nbd.cow usleep 200 RWRO="rw" RDEV=/dev/cow/0 # run ldconfig if not switched off via kernel command line ldcfg else # use normal UnionFS behaviour because rootfs is not NFS unset nfsro fi # finally mount the configured network/local block device for i in 0 5000 20000 100000 500000 1000000 ; do usleep $i mount -n -t $bldrfst -o $RWRO $RDEV /mnt 2>/dev/null && break done # check if we got the rootfilesystem directly or need to mount a container # file from the mounted block device if [ "${srvproto}" = "lbd" -a -f /mnt/boot/${slxconf_system_name} ]; then mkdir /dev/bootdisk mount --move /mnt /dev/bootdisk mount -t ${realbldrfst} -o loop \ /dev/bootdisk/boot/${slxconf_system_name} /mnt || error "$init_errloop" fi [ $DEBUGLEVEL -eq 20 ] && echo "** finished blockdev setup stuff at $(sysup)" elif [ -n ${iscsiserver} ] ; then [ $DEBUGLEVEL -eq 20 ] && echo "** started setting up iSCSI initiator at \ $(sysup)" #if [ -n ${iscsitarget} ] ; then # echo "InitiatorName=${iscsitarget}"|sed "s,@@@serverip@@@,$serverip," \ # >/etc/initiatorname.iscsi #else # discovery #fi #echo -e "node.startup = automatic">/etc/iscsid.conf #iscsid -c /etc/iscsid.conf # the cowloop part has to be moved (option for iscsi devices too) # and should be generalized for nbd, dnbd, iscsi fi # if no type of root filesystem is passed via kernel command line try # information gathered from dhcp process (only valid for nfs) if [ -z "${bldmod}" -a -z "${bldhost}" -a -z "${nfsserver}" ] ; then # information has to be read from dhcp and ldap configuration # cfgcomplete merges all configuration files cfgcomplete fi # mount nfs rootfs if [ -z "${bldmod}" -a -z "${bldserver}" ] ; then [ $DEBUGLEVEL -eq 20 ] && echo "** started nfs mount" # read in extended initramfs-setup . /etc/initramfs-setup # prefer nfsserver and nfspath from kernel commandline over the information # gotten from dhcp server if [ -n "${nfsserver}" -a -n "${nfspath}" ] ; then # check if nfsserver is set as variable @@@serverip@@@ nfsserver=$(checkip $nfsserver) else # we got a problem here error "$init_nfssp" fatal fi # interface might not be properly up - check reachability ping -c 1 -w 15 ${nfsserver} >/dev/null 2>&1 # mount the rootfs via nfs readonly (ro) fsmount nfs ${nfsserver} ${nfspath} /mnt ro #for transport in tcp udp fail; do # [ $proto = "fail" ] && { error "$init_nfs"; break; } # mount -n -t nfs -o ro,nolock,${transport} ${nfsroot} /mnt && break #done [ $DEBUGLEVEL -eq 20 ] && echo "** finished nfs mount at $(sysup)" fi runinithook '35-have-network-root' # get the complete collection of kernel modules and firmwares available testmkd /lib/firmware mount -n --bind /mnt/lib/modules /lib/modules && \ mount -n --bind /mnt/lib/firmware /lib/firmware || error "$init_moddir" # start hardware configuration as background process if not a special # debuglevel (21) is used for the option of manual hwautocfg start if [ ${DEBUGLEVEL} = 21 ] ; then echo "You can run 'hwautocfg main &' manually now ..." /bin/sh else [ $DEBUGLEVEL -eq 20 ] && echo "** started hwautocfg in background at \ $(sysup)" hwautocfg main & fi runinithook '40-started-hw-config' # unionfs/aufs modules visible by now if installed or directly compiled into # the kernel, try to use aufs for rw access if available union_type="" if [ ${aufs} -eq 1 ]; then aufs_in_kernel=$(grep -c aufs /proc/filesystems) if [ ${aufs_in_kernel} -eq 0 ]; then modprobe ${MODPRV} aufs 2>/dev/null aufs_have_module=$(lsmod | grep -ce "^aufs") [ ${aufs_have_module} -ne 0 ] && union_type="AUFS" else union_type="AUFS" fi fi if [ -z ${union_type} ] && [ ${unionfs} -eq 1 ]; then unionfs_in_kernel=$(grep -c unionfs /proc/filesystems) if [ ${unionfs_in_kernel} -eq 0 ]; then modprobe ${MODPRV} unionfs 2>/dev/null unionfs_have_module=$(lsmod | grep -ce "^unionfs") [ ${unionfs_have_module} -ne 0 ] && union_type="UnionFS" else union_type="UnionFS" fi fi if [ -z ${union_type} ] && [ ${fuse} -eq 1 ]; then fuse_in_kernel=$(grep -c fuse /proc/filesystems) if [ ${fuse_in_kernel} -eq 0 ]; then modprobe ${MODPRV} fuse 2>/dev/null fuse_have_module=$(lsmod | grep -ce "^fuse") [ ${fuse_have_module} -ne 0 ] && union_type="Fuse" else union_type="Fuse" fi fi if [ -z ${union_type} ]; then if [ ${fuse} -eq 0 -a ${aufs} -eq 0 -a ${unionfs} -eq 0 -a -z "${cowloop}" ] ; then error "$init_deselau" nonfatal unset fuse aufs unionfs else error "$init_loadaufs" nonfatal unset aufs unionfs fi fi # runtimer [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \ echo "** Filesystem setup started at $(sysup)" # setup of client root filesystem dependent on the availability of UnionFS if [ "x${union_type}" != "x" ] ; then echo "Using ${union_type} for rw access" mkdir -p ${rwdir}/union ${rwdir}/uniontmp /rorootfs # adapting tempfs size of the device directory (takes /tmp in stage4) mount -o remount,size=${tmpfssize} ${devdir} mount -n -t tmpfs -o size=${tmpfssize} none ${rwdir}/uniontmp # hack for handling unionfs with patched run-init mount -n --move /mnt /rorootfs if [ "$union_type" == "UnionFS" ]; then mount -n -t unionfs -o dirs=${rwdir}/uniontmp:/rorootfs=${nfsro}ro \ none /mnt mkdir -p /mnt/uniontmp mount -n --move ${rwdir}/uniontmp /mnt/uniontmp chmod 0755 /mnt/uniontmp /mnt elif [ "$union_type" == "AUFS" ]; then mount -n -t aufs -o br:/${rwdir}/uniontmp:/rorootfs=ro none /mnt mkdir -p /mnt/uniontmp mount -n --move ${rwdir}/uniontmp /mnt/uniontmp chmod 0755 /mnt/uniontmp /mnt elif [ "$union_type" == "Fuse" ]; then mkdir -p /tmp/union/rorootfs /tmp/union/uniontmp mount -n --move /rorootfs /tmp/union/rorootfs mount -n --move ${rwdir}/uniontmp /tmp/union/uniontmp unionfs -o cow,max_files=32768,allow_other,use_ino,suid,dev \ -o nonempty,chroot=/tmp/union \ /uniontmp=RW:/rorootfs=RO /mnt fi # running hardware disk/tmp setup now hwautocfg disk & # run ldconfig if switched on via kernel command line (token ldsc) or # triggered by unionized root filesystem ldcfg elif [ -z "${cowloop}" ] ; then # fire up hardware disk/tmp setup first hwautocfg disk & echo "Using bind mounts to ramdisk for rw access" mount -n -t tmpfs -o size=75% ramfs ${rwdir} for path in ${D_BINDMPTS} ; do mkdir -p ${rwdir}/${path} >/dev/null 2>&1 mount -n --bind ${rwdir}/${path} /mnt/${path} [ ${DEBUGLEVEL} -gt 1 -a ${DEBUGLEVEL} != 8 ] && \ echo "Created ${rwdir}/${path} and mounted it to /mnt/$path" done # see above ... ldcfg # save the RO directories mentioned in the distro-specific # config to a temporary directory. They will later on be restored for path in ${D_RODIRSINRW}; do if [ -d /mnt/${path} ] ; then list="${path} ${list}" # exclude them from etc copy process too echo "${path}/*"|sed -e "s,/root/,,;s,^/,," >>/tmp/etc.exclude mkdir -p /root/${path} >/dev/null 2>&1 mount -n --bind /mnt/${path} /root/${path} >/dev/null 2>&1 fi done for path in /etc/${D_SYSCONFDIR} ${D_DIRINBINDMNT} ${list}; do mkdir -p ${rwdir}/${path} done testmkd ${rwdir}/var/tmp 1777 # exclude all sysv runlevel link stuff for i in ${D_RCDIRS} ${D_INITBOOTD} ; do echo "*$i/*" >>/tmp/etc.exclude done # add list of files to be excluded and common excludes to the filter list echo -e "-\ndhcp*\n*~\n*.old\n*-\nxorg.conf*" >>/tmp/etc.exclude # if ld.so.cache is to be generated then do not copy the file [ -n "${ldsc}" ] && echo -e "ld.so.cache*" >>/tmp/etc.exclude # for tar exclude lists might be used, more difficult for cp cd /mnt tar -X /tmp/etc.exclude -cp etc/*|tar -xp -C ${rwdir} 2>/dev/null cd / mount -n --bind ${rwdir}/etc /mnt/etc mount -n --bind ${rwdir}/var /mnt/var # get the "covered" mounts back into filesystem structure for path in ${list}; do mount -n --move /root/$path /mnt/$path #>>$LOGFILE 2>&1 done #rm -rf /root/* >/dev/null 2>&1 # run some specific stuff !? fi runinithook '50-have-layered-fs' # generate a set of default directories . /etc/openslx.conf for dir in $OPENSLX_DEFAULT_LOGDIR $OPENSLX_DEFAULT_BINDIR \ $OPENSLX_DEFAULT_LIBDIR $OPENSLX_DEFAULT_VIRTDIR; do testmkd /mnt/$dir done chmod -R 1777 /mnt/${OPENSLX_DEFAULT_LOGDIR} # script for stuff to execute during early bootup d_mkrlscript init boot.slx "Running configuration postponed from InitRamFS" echo "fs complete at $(sysup)" >/tmp/fscmpl # runtimer [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \ echo "** Filesystem setup completed at $(sysup)" # write debug file information after filesystem setup completed echo -e "# /etc${D_SYSCONFDIR}/logfile - file created by $0 (initramfs \ from $date)\n#\n# logfile \ for linux diskless client specific debugging output\nLOGFILE=\"$LOGFILE\"\n#\ \n# debug level\nDEBUGLEVEL=\"$DEBUGLEVEL\"" \ > /mnt/etc/${D_SYSCONFDIR}/logfile || error "$init_errlog" # run distribution independent and dependent configuration of files and # services (offer debug shell in runlevel 22) if [ ${DEBUGLEVEL} = 22 ] ; then /bin/sh else servconfig & fi for path in @@@COMDIRINDXS@@@ ${D_DIRINDXS} ${D_DIRINBINDMNT} ; do testmkd /mnt/${path} done # Needed writable subdirs nested in readonly subdirs of writable one for path in ${D_RWDIRSINRO}; do mount -n -t tmpfs none /mnt/${path} done for i in /var/run/utmp /var/log/wtmp /var/log/lastlog /etc/mtab ; do echo -n > /mnt/$i done chown 65534:0 /mnt/var/lib/nobody echo -e "# /etc/fstab - file generated by $0 (initramfs from $date)\n#\ \tOpenSLX Project, info@openslx.com\n\nrootfs\t\t/\t\trootfs\t\tro\t\t 0 0\n\ proc\t\t/proc\t\tproc\t\tdefaults\t 0 0\ninitramdevs\t/dev\t\ttmpfs\ \t\trw\t\t 0 0\ndevpts\t\t/dev/pts\tdevpts\t\tmode=0620,gid=5\t 0 0" \ >/mnt/etc/fstab || error "$init_fstab" echo -e "rootfs / rootfs rw 0 0\ninitramdevs /dev tmpfs rw\ 0 0" > /mnt/etc/mtab # copy library cache if generated if [ -n "${ldsc}" ] ; then # creating library cache takes a while ... if waitfor /tmp/ldcfg 50000 ; then test -s /mnt/tmp/ld.so.cache && \ mv /mnt/tmp/ld.so.cache /mnt/etc/ld.so.cache else error "$init_errldcfg" fi else [ $DEBUGLEVEL -gt 2 ] && error "$init_infldcfg" nonfatal fi runinithook '60-have-servconfig' # wait a while for hardware setup to complete and start cleanup procedure [ $DEBUGLEVEL -gt 1 ] && echo "Waiting for hwautocfg to finish ..." waitfor /tmp/hwcfg 20000 || error "$init_errhw" hwautocfg finish & # wait a while for services setup to complete [ $DEBUGLEVEL -gt 1 ] && echo "Waiting for servconfig to finish ..." waitfor /tmp/svcfg 10000 || error "$init_errsw" # IP configuration is complete and should not be updated automatically killall -9 udhcpc 2>/dev/null # if uniondirs is not set yet, maybe the unions were given via initramfs-setup if [ -z "$uniondirs" ]; then if [ "$union_type" == "AUFS" ]; then # does it contain "://"? if [ "$aufs" != "${aufs#*://}" ]; then uniondirs="$aufs" fi elif [ "$union_type" == "UnionFS" ]; then # does it contain "://"? if [ "$unionfs" != "${unionfs#*://}" ]; then uniondirs="$unionfs" fi fi fi # if locations are given that should be unioned with the fs root, do it if [ -n "$uniondirs" ]; then include_in_fsroot_union "$union_type" "$uniondirs" fi runinithook '70-before-plugins' # ddcinfo temporary overwrite (with kernel cmdline ddcinfo=1) if [ "${ddcinfo}" = "1" -a -f /initramfs/plugin-conf/xserver.conf ]; then echo 'xserver_ddcinfo="1"' >> /initramfs/plugin-conf/xserver.conf fi # runtimer [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \ echo "** Plugin configuration started at $(sysup)" # check for any plugin-specific runlevel scripts and run them, if found: if [ ${DEBUGLEVEL} = 25 ] ; then /bin/sh else if [ -d /etc/plugin-init.d ]; then for plugin_starter in /etc/plugin-init.d/*.sh; do if [ -e $plugin_starter ]; then [ $DEBUGLEVEL -gt 0 ] \ && echo -n "Running plugin starter $plugin_starter ..." [ $DEBUGLEVEL -eq 15 ] \ && sed '/^#!/ a\\set -x' -i $plugin_starter init-wrapper $plugin_starter >>/tmp/plugin_starter 2>&1 if [ $? -eq 0 ]; then [ $DEBUGLEVEL -gt 0 ] \ && echo " ok" else [ $DEBUGLEVEL -gt 0 ] \ && echo " failed" fi fi done # load variables defined by plugins to current environment [ -f /tmp/env/wrapper.env ] && . /tmp/env/wrapper.env fi fi runinithook '80-after-plugins' # runtimer [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \ echo "** Plugin configuration finished at $(sysup)" # create links for initial stage4 boot scripts initial_boot runinithook '85-have-initial-boot' # post init for some distro specific stuff to run postinit # general postinit.local configurable by the admin via openslx/config/ [ -f /initramfs/postinit.local ] && { [ $DEBUGLEVEL -gt 0 ] && \ echo -n "Running script /bin/postinit.local ... " chmod u+x /initramfs/postinit.local /initramfs/postinit.local [ $DEBUGLEVEL -gt 0 ] && echo "ok"; } # start a debug shell in higher debug levels [ $DEBUGLEVEL -gt 2 -a $DEBUGLEVEL != 8 ] \ && echo "DEBUGLEVEL>2: starting debug-shell, exit with CTRL+D" && /bin/sh runinithook '90-postinit-done' # unmount the bind mounted modules, firmware directories and nfs /tmp/scratch # (if present) export ticks for ticks in 0 1 2 5 10 20 30; do sleep $ticks && umount -n /lib/modules 2>/dev/null && break error "$init_wait" nonfatal done for ticks in 0 1 2 5 10 20 30; do sleep $ticks && umount -n /lib/firmware 2>/dev/null && break error "$init_wait" nonfatal done mount 2>/dev/null | grep -q "/tmp/scratch type nfs" && \ for ticks in 0 1 2 5 10 20 30; do sleep $ticks && umount -n /tmp/scratch 2>/dev/null && break done mount 2>/dev/null | grep -q /lib/modules && error "$init_errumnt" # close runlevel script for stuff to execute during early bootup d_mkrlscript close boot.slx "" # put /tmp into stage4 mtab and add stuff to stage4 fstab sed -n "s,/mnt,,;/\/tmp /p" /proc/mounts >> /mnt/etc/mtab [ -f /tmp/fstab ] && cat /tmp/fstab >> /mnt/etc/fstab # preparations to leave initramfs - umounting ... umount -n /sys || error "$init_errsys" nonfatal chmod 1777 /dev/shm /mnt/tmp 2>/dev/null runinithook '95-cleanup' # kill hwautocfg, servconfig, hwinfo, syslogd, etc. killall -9 hwautocfg servconfig debugshell hwinfo syslogd logread 2>/dev/null # runtimer [ $DEBUGLEVEL -eq 8 -o $DEBUGLEVEL -eq 20 ] && \ echo "** SLX init ended near $(sysup)" # kill the watchdog (autopoweroff, if stage3 init never finishes) [ -f /tmp/watchdogpid ] && kill $(cat /tmp/watchdogpid) 2>/dev/null # stop logging services if required and move logfile into stage4 filesystem # (if exists) killall klogd 2>/dev/null [ -f /var/log/slx-boot.log ] && mv /var/log/slx-boot.log \ /mnt/var/log/slx-s3boot.log [ -f /var/log/messages ] && cp /var/log/messages \ /mnt/var/log/slx_messages 2>/dev/null # if no syslog plugin was configured, start the daemon again writing to no # logfile directly (useless fake test as placeholder) # THIS IS NOT WORKING SOMEHOW!! #[ ! -d /mnt/opt/openslx/plugin-repo/syslog/ ] && syslogd -O /mnt/var/log/testfile # move /dev and unmount /proc and unset all old, unneeded environment # variables mount -n --move /dev /mnt/dev mkdir -p /mnt/run mount -n --move /run /mnt/run umount -n /proc unset client debug date initrd ip bldroot macaddr nwif nfsroot rootfs ticks \ vci vga unset BOOT_IMAGE KCMDLINE KERNEL MODPRV NWMODULES OLDPWD UDEVD_EVENT_TIMEOUT \ SLXVERSION UDEVD_EXPECTED_SEQNUM PATH runinithook '99-handing-over' # new style of pivoting (switch_root or run-init) exec /sbin/switch_root -c dev/console /mnt /sbin/init $DEBUG_UPSTART || \ error "$init_runinit"