/*
* Board support file for OMAP4430 based PandaBoard.
*
* Copyright (C) 2010 Texas Instruments
*
* Author: David Anders <x0132446@ti.com>
*
* Based on mach-omap2/board-4430sdp.c
*
* Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* Based on mach-omap2/board-3430sdp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/display.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include <plat/panel-generic-dpi.h>
#include "timer-gp.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
#define GPIO_HUB_POWER 1
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
/* wl127x BT, FM, GPS connectivity chip */
static int wl1271_gpios[] = {46, -1, -1};
static struct platform_device wl1271_device = {
.name = "kim",
.id = -1,
.dev = {
.platform_data = &wl1271_gpios,
},
};
static struct gpio_led gpio_leds[] = {
{
.name = "pandaboard::status1",
.default_trigger = "heartbeat",
.gpio = 7,
},
{
.name = "pandaboard::status2",
.default_trigger = "mmc0",
.gpio = 8,
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
},
};
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
};
static void __init omap4_panda_init_early(void)
{
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = false,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static void __init omap4_ehci_init(void)
{
int ret;
struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
phy_ref_clk = clk_get(NULL, "auxclk3_ck");
if (IS_ERR(phy_ref_clk)) {
pr_err("Cannot request auxclk3\n");
goto error1;
}
clk_set_rate(phy_ref_clk, 19200000);
clk_enable(phy_ref_clk);
/* disable the power to the usb hub prior to init */
ret = gpio_request(GPIO_HUB_POWER, "hub_power");
if (ret) {
pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER);
goto error1;
}
gpio_export(GPIO_HUB_POWER, 0);
gpio_direction_output(GPIO_HUB_POWER, 0);
gpio_set_value(GPIO_HUB_POWER, 0);
/* reset phy+hub */
ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset");
if (ret) {
pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET);
goto error2;
}
gpio_export(GPIO_HUB_NRESET, 0);
gpio_direction_output(GPIO_HUB_NRESET, 0);
gpio_set_value(GPIO_HUB_NRESET, 0);
gpio_set_value(GPIO_HUB_NRESET, 1);
usbhs_init(&usbhs_bdata);
/* enable power to hub */
gpio_set_value(GPIO_HUB_POWER, 1);
return;
error2:
gpio_free(GPIO_HUB_POWER);
error1:
pr_err("Unable to initialize EHCI power/reset\n");
return;
}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
.power = 100,
};
static struct twl4030_usb_data omap4_usbphy_data = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
},
{
.name = "wl1271",
.mmc = 5,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.ocr_mask = MMC_VDD_165_195,
.nonremovable = true,
},
{} /* Terminator */
};
static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
{
.supply = "vmmc",
.dev_name = "omap_hsmmc.0",
},
};
static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
.supply = "vmmc",
.dev_name = "omap_hsmmc.4",
};
static struct regulator_init_data panda_vmmc5 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap4_panda_vmmc5_supply,
};
static struct fixed_voltage_config panda_vwlan = {
.supply_name = "vwl1271",
.microvolts = 1800000, /* 1.8V */
.gpio = GPIO_WIFI_PMENA,
.startup_delay = 70000, /* 70msec */
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &panda_vmmc5,
};
static struct platform_device omap_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &panda_vwlan,
},
};
struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct omap_mmc_platform_data *pdata = dev->platform_data;
if (!pdata) {
dev_err(dev, "%s: NULL platform data\n", __func__);
return -EINVAL;
}
/* Setting MMC1 Card detect Irq */
if (pdev->id == 0) {
ret = twl6030_mmc_card_detect_config();
if (ret)
dev_err(dev, "%s: Error card detect config(%d)\n",
__func__, ret);
else
pdata->slots[0].card_detect = twl6030_mmc_card_detect;
}
return ret;
}
static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
{
struct omap_mmc_platform_data *pdata;
/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
if (!dev) {
pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
return;
}
pdata = dev->platform_data;
pdata->init = omap4_twl6030_hsmmc_late_init;
}
static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
struct omap2_hsmmc_info *c;
omap2_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
omap4_twl6030_hsmmc_set_late_init(c->dev);
return 0;
}
static struct regulator_init_data omap4_panda_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data omap4_panda_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = omap4_panda_vmmc_supply,
};
static struct regulator_init_data omap4_panda_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_clk32kg = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data omap4_panda_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &omap4_panda_vmmc,
.vpp = &omap4_panda_vpp,
.vana = &omap4_panda_vana,
.vcxio = &omap4_panda_vcxio,
.vdac = &omap4_panda_vdac,
.vusb = &omap4_panda_vusb,
.vaux2 = &omap4_panda_vaux2,
.vaux3 = &omap4_panda_vaux3,
.clk32kg = &omap4_panda_clk32kg,
.usb = &omap4_usbphy_data,
};
static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl6030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = OMAP44XX_IRQ_SYS_1N,
.platform_data = &omap4_panda_twldata,
},
};
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
* is connected as I2C slave device, and can be accessed at address 0x50
*/
static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
{
I2C_BOARD_INFO("eeprom", 0x50),
},
};
static int __init omap4_panda_i2c_init(void)
{
/*
* Phoenix Audio IC needs I2C1 to
* start with 400 KHz or less
*/
omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
ARRAY_SIZE(omap4_panda_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz
*/
omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
ARRAY_SIZE(panda_i2c_eeprom));
omap_register_i2c_bus(4, 400, NULL, 0);
return 0;
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 53 */
OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
/* WLAN POWER ENABLE - GPIO 43 */
OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
/* WLAN SDIO: MMC5 CMD */
OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC5 CLK */
OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC5 DAT[0-3] */
OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
/* gpio 0 - TFP410 PD */
OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
/* dispc2_data23 */
OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data22 */
OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data21 */
OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data20 */
OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data19 */
OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data18 */
OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data15 */
OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data14 */
OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data13 */
OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data12 */
OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data11 */
OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data10 */
OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data9 */
OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data16 */
OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data17 */
OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_hsync */
OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_pclk */
OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_vsync */
OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_de */
OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data8 */
OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data7 */
OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data6 */
OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data5 */
OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data4 */
OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data3 */
OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data2 */
OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data1 */
OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data0 */
OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_MUX_STATIC("uart4_rx.uart4_rx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart4_tx.uart4_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
};
static inline void board_serial_init(void)
{
struct omap_board_data bdata;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
/* pass dummy data for UART1 */
omap_serial_init_port(&bdata);
omap_serial_init_port(&serial2_data);
omap_serial_init_port(&serial3_data);
omap_serial_init_port(&serial4_data);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(dssdev->reset_gpio, 1);
return 0;
}
static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(dssdev->reset_gpio, 0);
}
/* Using generic display panel */
static struct panel_generic_dpi_data omap4_dvi_panel = {
.name = "generic",
.platform_enable = omap4_panda_enable_dvi,
.platform_disable = omap4_panda_disable_dvi,
};
struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_dpi_panel",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
.channel = OMAP_DSS_CHANNEL_LCD2,
};
int __init omap4_panda_dvi_init(void)
{
int r;
/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
GPIOF_OUT_INIT_LOW, "DVI PD");
if (r)
pr_err("Failed to get DVI powerdown GPIO\n");
return r;
}
static void omap4_panda_hdmi_mux_init(void)
{
/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
omap_mux_init_signal("hdmi_hpd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_cec",
OMAP_PIN_INPUT_PULLUP);
/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
omap_mux_init_signal("hdmi_ddc_scl",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_ddc_sda",
OMAP_PIN_INPUT_PULLUP);
}
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
{
int status;
status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
"hdmi_gpio_hpd");
if (status) {
pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
return status;
}
status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
"hdmi_gpio_ls_oe");
if (status) {
pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
goto error1;
}
return 0;
error1:
gpio_free(HDMI_GPIO_HPD);
return status;
}
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
gpio_free(HDMI_GPIO_LS_OE);
gpio_free(HDMI_GPIO_HPD);
}
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
&omap4_panda_dvi_device,
&omap4_panda_hdmi_device,
};
static struct omap_dss_board_info omap4_panda_dss_data = {
.num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
.devices = omap4_panda_dss_devices,
.default_device = &omap4_panda_dvi_device,
};
void omap4_panda_display_init(void)
{
int r;
r = omap4_panda_dvi_init();
if (r)
pr_err("error initializing panda DVI\n");
omap4_panda_hdmi_mux_init();
omap_display_init(&omap4_panda_dss_data);
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
static void __init omap4_panda_map_io(void)
{
omap2_set_globals_443x();
omap44xx_map_common_io();
}
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap4_panda_map_io,
.init_early = omap4_panda_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap_timer,
MACHINE_END
