/*
* Blackfin core clock scaling
*
* Copyright 2008-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <asm/blackfin.h>
#include <asm/time.h>
#include <asm/dpmc.h>
/* this is the table of CCLK frequencies, in Hz */
/* .index is the entry in the auxiliary dpm_state_table[] */
static struct cpufreq_frequency_table bfin_freq_table[] = {
{
.frequency = CPUFREQ_TABLE_END,
.index = 0,
},
{
.frequency = CPUFREQ_TABLE_END,
.index = 1,
},
{
.frequency = CPUFREQ_TABLE_END,
.index = 2,
},
{
.frequency = CPUFREQ_TABLE_END,
.index = 0,
},
};
static struct bfin_dpm_state {
unsigned int csel; /* system clock divider */
unsigned int tscale; /* change the divider on the core timer interrupt */
} dpm_state_table[3];
#if defined(CONFIG_CYCLES_CLOCKSOURCE)
/*
* normalized to maximum frequency offset for CYCLES,
* used in time-ts cycles clock source, but could be used
* somewhere also.
*/
unsigned long long __bfin_cycles_off;
unsigned int __bfin_cycles_mod;
#endif
/**************************************************************************/
static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
{
unsigned long csel, min_cclk;
int index;
/* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
#if ANOMALY_05000273 || ANOMALY_05000274 || \
(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
min_cclk = sclk * 2;
#else
min_cclk = sclk;
#endif
#ifndef CONFIG_BF60x
csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
#else
csel = bfin_read32(CGU0_DIV) & 0x1F;
#endif
for (index = 0; (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
bfin_freq_table[index].frequency = cclk >> index;
#ifndef CONFIG_BF60x
dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1;
#else
dpm_state_table[index].csel = csel;
dpm_state_table[index].tscale = TIME_SCALE >> index;
#endif
pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
bfin_freq_table[index].frequency,
dpm_state_table[index].csel,
dpm_state_table[index].tscale);
}
return;
}
static void bfin_adjust_core_timer(void *info)
{
unsigned int tscale;
unsigned int index = *(unsigned int *)info;
/* we have to adjust the core timer, because it is using cclk */
tscale = dpm_state_table[index].tscale;
bfin_write_TSCALE(tscale);
return;
}
static unsigned int bfin_getfreq_khz(unsigned int cpu)
{
/* Both CoreA/B have the same core clock */
return get_cclk() / 1000;
}
#ifdef CONFIG_BF60x
unsigned long cpu_set_cclk(int cpu, unsigned long new)
{
struct clk *clk;
int ret;
clk = clk_get(NULL, "CCLK");
if (IS_ERR(clk))
return -ENODEV;
ret = clk_set_rate(clk, new);
clk_put(clk);
return ret;
}
#endif
static int bfin_target(struct cpufreq_policy *poli,
unsigned int target_freq, unsigned int relation)
{
#ifndef CONFIG_BF60x
unsigned int plldiv;
#endif
unsigned int index, cpu;
unsigned long flags, cclk_hz;
struct cpufreq_freqs freqs;
static unsigned long lpj_ref;
static unsigned int lpj_ref_freq;
int ret = 0;
#if defined(CONFIG_CYCLES_CLOCKSOURCE)
cycles_t cycles;
#endif
for_each_online_cpu(cpu) {
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
if (!policy)
continue;
if (cpufreq_frequency_table_target(policy, bfin_freq_table,
target_freq, relation, &index))
return -EINVAL;
cclk_hz = bfin_freq_table[index].frequency;
freqs.old = bfin_getfreq_khz(0);
freqs.new = cclk_hz;
freqs.cpu = cpu;
pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
cclk_hz, target_freq, freqs.old);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
if (cpu == CPUFREQ_CPU) {
flags = hard_local_irq_save();
#ifndef CONFIG_BF60x
plldiv = (bfin_read_PLL_DIV() & SSEL) |
dpm_state_table[index].csel;
bfin_write_PLL_DIV(plldiv);
#else
ret = cpu_set_cclk(cpu, freqs.new * 1000);
if (ret != 0) {
WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret);
break;
}
#endif
on_each_cpu(bfin_adjust_core_timer, &index, 1);
#if defined(CONFIG_CYCLES_CLOCKSOURCE)
cycles = get_cycles();
SSYNC();
cycles += 10; /* ~10 cycles we lose after get_cycles() */
__bfin_cycles_off +=
(cycles << __bfin_cycles_mod) - (cycles << index);
__bfin_cycles_mod = index;
#endif
if (!lpj_ref_freq) {
lpj_ref = loops_per_jiffy;
lpj_ref_freq = freqs.old;
}
if (freqs.new != freqs.old) {
loops_per_jiffy = cpufreq_scale(lpj_ref,
lpj_ref_freq, freqs.new);
}
hard_local_irq_restore(flags);
}
/* TODO: just test case for cycles clock source, remove later */
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
pr_debug("cpufreq: done\n");
return ret;
}
static int bfin_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, bfin_freq_table);
}
static int __bfin_cpu_init(struct cpufreq_policy *policy)
{
unsigned long cclk, sclk;
cclk = get_cclk() / 1000;
sclk = get_sclk() / 1000;
if (policy->cpu == CPUFREQ_CPU)
bfin_init_tables(cclk, sclk);
policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
policy->cur = cclk;
cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
}
static struct freq_attr *bfin_freq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver bfin_driver = {
.verify = bfin_verify_speed,
.target = bfin_target,
.get = bfin_getfreq_khz,
.init = __bfin_cpu_init,
.name = "bfin cpufreq",
.owner = THIS_MODULE,
.attr = bfin_freq_attr,
};
static int __init bfin_cpu_init(void)
{
return cpufreq_register_driver(&bfin_driver);
}
static void __exit bfin_cpu_exit(void)
{
cpufreq_unregister_driver(&bfin_driver);
}
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("cpufreq driver for Blackfin");
MODULE_LICENSE("GPL");
module_init(bfin_cpu_init);
module_exit(bfin_cpu_exit);