/*
* NAND flash simulator.
*
* Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org>
*
* Copyright (C) 2004 Nokia Corporation
*
* Note: NS means "NAND Simulator".
* Note: Input means input TO flash chip, output means output FROM chip.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
* Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*
* $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#ifdef CONFIG_NS_ABS_POS
#include <asm/io.h>
#endif
/* Default simulator parameters values */
#if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
!defined(CONFIG_NANDSIM_SECOND_ID_BYTE) || \
!defined(CONFIG_NANDSIM_THIRD_ID_BYTE) || \
!defined(CONFIG_NANDSIM_FOURTH_ID_BYTE)
#define CONFIG_NANDSIM_FIRST_ID_BYTE 0x98
#define CONFIG_NANDSIM_SECOND_ID_BYTE 0x39
#define CONFIG_NANDSIM_THIRD_ID_BYTE 0xFF /* No byte */
#define CONFIG_NANDSIM_FOURTH_ID_BYTE 0xFF /* No byte */
#endif
#ifndef CONFIG_NANDSIM_ACCESS_DELAY
#define CONFIG_NANDSIM_ACCESS_DELAY 25
#endif
#ifndef CONFIG_NANDSIM_PROGRAMM_DELAY
#define CONFIG_NANDSIM_PROGRAMM_DELAY 200
#endif
#ifndef CONFIG_NANDSIM_ERASE_DELAY
#define CONFIG_NANDSIM_ERASE_DELAY 2
#endif
#ifndef CONFIG_NANDSIM_OUTPUT_CYCLE
#define CONFIG_NANDSIM_OUTPUT_CYCLE 40
#endif
#ifndef CONFIG_NANDSIM_INPUT_CYCLE
#define CONFIG_NANDSIM_INPUT_CYCLE 50
#endif
#ifndef CONFIG_NANDSIM_BUS_WIDTH
#define CONFIG_NANDSIM_BUS_WIDTH 8
#endif
#ifndef CONFIG_NANDSIM_DO_DELAYS
#define CONFIG_NANDSIM_DO_DELAYS 0
#endif
#ifndef CONFIG_NANDSIM_LOG
#define CONFIG_NANDSIM_LOG 0
#endif
#ifndef CONFIG_NANDSIM_DBG
#define CONFIG_NANDSIM_DBG 0
#endif
static uint first_id_byte = CONFIG_NANDSIM_FIRST_ID_BYTE;
static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE;
static uint third_id_byte = CONFIG_NANDSIM_THIRD_ID_BYTE;
static uint fourth_id_byte = CONFIG_NANDSIM_FOURTH_ID_BYTE;
static uint access_delay = CONFIG_NANDSIM_ACCESS_DELAY;
static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY;
static uint erase_delay = CONFIG_NANDSIM_ERASE_DELAY;
static uint output_cycle = CONFIG_NANDSIM_OUTPUT_CYCLE;
static uint input_cycle = CONFIG_NANDSIM_INPUT_CYCLE;
static uint bus_width = CONFIG_NANDSIM_BUS_WIDTH;
static uint do_delays = CONFIG_NANDSIM_DO_DELAYS;
static uint log = CONFIG_NANDSIM_LOG;
static uint dbg = CONFIG_NANDSIM_DBG;
module_param(first_id_byte, uint, 0400);
module_param(second_id_byte, uint, 0400);
module_param(third_id_byte, uint, 0400);
module_param(fourth_id_byte, uint, 0400);
module_param(access_delay, uint, 0400);
module_param(programm_delay, uint, 0400);
module_param(erase_delay, uint, 0400);
module_param(output_cycle, uint, 0400);
module_param(input_cycle, uint, 0400);
module_param(bus_width, uint, 0400);
module_param(do_delays, uint, 0400);
module_param(log, uint, 0400);
module_param(dbg, uint, 0400);
MODULE_PARM_DESC(first_id_byte, "The fist byte returned by NAND Flash 'read ID' command (manufaturer ID)");
MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command");
MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command");
MODULE_PARM_DESC(access_delay, "Initial page access delay (microiseconds)");
MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)");
MODULE_PARM_DESC(output_cycle, "Word output (from flash) time (nanodeconds)");
MODULE_PARM_DESC(input_cycle, "Word input (to flash) time (nanodeconds)");
MODULE_PARM_DESC(bus_width, "Chip's bus width (8- or 16-bit)");
MODULE_PARM_DESC(do_delays, "Simulate NAND delays using busy-waits if not zero");
MODULE_PARM_DESC(log, "Perform logging if not zero");
MODULE_PARM_DESC(dbg, "Output debug information if not zero");
/* The largest possible page size */
#define NS_LARGEST_PAGE_SIZE 2048
/* The prefix for simulator output */
#define NS_OUTPUT_PREFIX "[nandsim]"
/* Simulator's output macros (logging, debugging, warning, error) */
#define NS_LOG(args...) \
do { if (log) printk(KERN_DEBUG NS_OUTPUT_PREFIX " log: " args); } while(0)
#define NS_DBG(args...) \
do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug: " args); } while(0)
#define NS_WARN(args...) \
do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warnig: " args); } while(0)
#define NS_ERR(args...) \
do { printk(KERN_ERR NS_OUTPUT_PREFIX " errorr: " args); } while(0)
/* Busy-wait delay macros (microseconds, milliseconds) */
#define NS_UDELAY(us) \
do { if (do_delays) udelay(us); } while(0)
#define NS_MDELAY(us) \
do { if (do_delays) mdelay(us); } while(0)
/* Is the nandsim structure initialized ? */
#define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0)
/* Good operation completion status */
#define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0)))
/* Operation failed completion status */
#define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns))
/* Calculate the page offset in flash RAM image by (row, column) address */
#define NS_RAW_OFFSET(ns) \
(((ns)->regs.row << (ns)->geom.pgshift) + ((ns)->regs.row * (ns)->geom.oobsz) + (ns)->regs.column)
/* Calculate the OOB offset in flash RAM image by (row, column) address */
#define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
/* After a command is input, the simulator goes to one of the following states */
#define STATE_CMD_READ0 0x00000001 /* read data from the beginning of page */
#define STATE_CMD_READ1 0x00000002 /* read data from the second half of page */
#define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */
#define STATE_CMD_PAGEPROG 0x00000004 /* start page programm */
#define STATE_CMD_READOOB 0x00000005 /* read OOB area */
#define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */
#define STATE_CMD_STATUS 0x00000007 /* read status */
#define STATE_CMD_STATUS_M 0x00000008 /* read multi-plane status (isn't implemented) */
#define STATE_CMD_SEQIN 0x00000009 /* sequential data imput */
#define STATE_CMD_READID 0x0000000A /* read ID */
#define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
/* After an addres is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
#define STATE_ADDR_MASK 0x00000030 /* address states mask */
/* Durind data input/output the simulator is in these states */
#define STATE_DATAIN 0x00000100 /* waiting for data input */
#define STATE_DATAIN_MASK 0x00000100 /* data input states mask */
#define STATE_DATAOUT 0x00001000 /* waiting for page data output */
#define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */
#define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */
#define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */
#define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */
/* Previous operation is done, ready to accept new requests */
#define STATE_READY 0x00000000
/* This state is used to mark that the next state isn't known yet */
#define STATE_UNKNOWN 0x10000000
/* Simulator's actions bit masks */
#define ACTION_CPY 0x00100000 /* copy page/OOB to the internal buffer */
#define ACTION_PRGPAGE 0x00200000 /* programm the internal buffer to flash */
#define ACTION_SECERASE 0x00300000 /* erase sector */
#define ACTION_ZEROOFF 0x00400000 /* don't add any offset to address */
#define ACTION_HALFOFF 0x00500000 /* add to address half of page */
#define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */
#define ACTION_MASK 0x00700000 /* action mask */
#define NS_OPER_NUM 12 /* Number of operations supported by the simulator */
#define NS_OPER_STATES 6 /* Maximum number of states in operation */
#define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */
#define OPT_PAGE256 0x00000001 /* 256-byte page chips */
#define OPT_PAGE512 0x00000002 /* 512-byte page chips */
#define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */
#define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */
#define OPT_AUTOINCR 0x00000020 /* page number auto inctimentation is possible */
#define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
#define OPT_LARGEPAGE (OPT_PAGE2048) /* 2048-byte page chips */
#define OPT_SMALLPAGE (OPT_PAGE256 | OPT_PAGE512) /* 256 and 512-byte page chips */
/* Remove action bits ftom state */
#define NS_STATE(x) ((x) & ~ACTION_MASK)
/*
* Maximum previous states which need to be saved. Currently saving is
* only needed for page programm operation with preceeded read command
* (which is only valid for 512-byte pages).
*/
#define NS_MAX_PREVSTATES 1
/*
* The structure which describes all the internal simulator data.
*/
struct nandsim {
struct mtd_partition part;
uint busw; /* flash chip bus width (8 or 16) */
u_char ids[4]; /* chip's ID bytes */
uint32_t options; /* chip's characteristic bits */
uint32_t state; /* current chip state */
uint32_t nxstate; /* next expected state */
uint32_t *op; /* current operation, NULL operations isn't known yet */
uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */
uint16_t npstates; /* number of previous states saved */
uint16_t stateidx; /* current state index */
/* The simulated NAND flash image */
union flash_media {
u_char *byte;
uint16_t *word;
} mem;
/* Internal buffer of page + OOB size bytes */
union internal_buffer {
u_char *byte; /* for byte access */
uint16_t *word; /* for 16-bit word access */
} buf;
/* NAND flash "geometry" */
struct nandsin_geometry {
uint32_t totsz; /* total flash size, bytes */
uint32_t secsz; /* flash sector (erase block) size, bytes */
uint pgsz; /* NAND flash page size, bytes */
uint oobsz; /* page OOB area size, bytes */
uint32_t totszoob; /* total flash size including OOB, bytes */
uint pgszoob; /* page size including OOB , bytes*/
uint secszoob; /* sector size including OOB, bytes */
uint pgnum; /* total number of pages */
uint pgsec; /* number of pages per sector */
uint secshift; /* bits number in sector size */
uint pgshift; /* bits number in page size */
uint oobshift; /* bits number in OOB size */
uint pgaddrbytes; /* bytes per page address */
uint secaddrbytes; /* bytes per sector address */
uint idbytes; /* the number ID bytes that this chip outputs */
} geom;
/* NAND flash internal registers */
struct nandsim_regs {
unsigned command; /* the command register */
u_char status; /* the status register */
uint row; /* the page number */
uint column; /* the offset within page */
uint count; /* internal counter */
uint num; /* number of bytes which must be processed */
uint off; /* fixed page offset */
} regs;
/* NAND flash lines state */
struct ns_lines_status {
int ce; /* chip Enable */
int cle; /* command Latch Enable */
int ale; /* address Latch Enable */
int wp; /* write Protect */
} lines;
};
/*
* Operations array. To perform any operation the simulator must pass
* through the correspondent states chain.
*/
static struct nandsim_operations {
uint32_t reqopts; /* options which are required to perform the operation */
uint32_t states[NS_OPER_STATES]; /* operation's states */
} ops[NS_OPER_NUM] = {
/* Read page + OOB from the beginning */
{OPT_SMALLPAGE, {STATE_CMD_READ0 | ACTION_ZEROOFF, STATE_ADDR_PAGE | ACTION_CPY,
STATE_DATAOUT, STATE_READY}},
/* Read page + OOB from the second half */
{OPT_PAGE512_8BIT, {STATE_CMD_READ1 | ACTION_HALFOFF, STATE_ADDR_PAGE | ACTION_CPY,
STATE_DATAOUT, STATE_READY}},
/* Read OOB */
{OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
STATE_DATAOUT, STATE_READY}},
/* Programm page starting from the beginning */
{OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
/* Programm page starting from the beginning */
{OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
/* Programm page starting from the second half */
{OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
/* Programm OOB */
{OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
/* Erase sector */
{OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}},
/* Read status */
{OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}},
/* Read multi-plane status */
{OPT_SMARTMEDIA, {STATE_CMD_STATUS_M, STATE_DATAOUT_STATUS_M, STATE_READY}},
/* Read ID */
{OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
/* Large page devices read page */
{OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
STATE_DATAOUT, STATE_READY}}
};
/* MTD structure for NAND controller */
static struct mtd_info *nsmtd;
static u_char ns_verify_buf[NS_LARGEST_PAGE_SIZE];
/*
* Initialize the nandsim structure.
*
* RETURNS: 0 if success, -ERRNO if failure.
*/
static int
init_nandsim(struct mtd_info *mtd)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
struct nandsim *ns = (struct nandsim *)(chip->priv);
int i;
if (NS_IS_INITIALIZED(ns)) {
NS_ERR("init_nandsim: nandsim is already initialized\n");
return -EIO;
}
/* Force mtd to not do delays */
chip->chip_delay = 0;
/* Initialize the NAND flash parameters */
ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
ns->geom.totsz = mtd->size;
ns->geom.pgsz = mtd->oobblock;
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
ns->geom.pgnum = ns->geom.totsz / ns->geom.pgsz;
ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz;
ns->geom.secshift = ffs(ns->geom.secsz) - 1;
ns->geom.pgshift = chip->page_shift;
ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
ns->geom.pgsec = ns->geom.secsz / ns->geom.pgsz;
ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec;
ns->options = 0;
if (ns->geom.pgsz == 256) {
ns->options |= OPT_PAGE256;
}
else if (ns->geom.pgsz == 512) {
ns->options |= (OPT_PAGE512 | OPT_AUTOINCR);
if (ns->busw == 8)
ns->options |= OPT_PAGE512_8BIT;
} else if (ns->geom.pgsz == 2048) {
ns->options |= OPT_PAGE2048;
} else {
NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
return -EIO;
}
if (ns->options & OPT_SMALLPAGE) {
if (ns->geom.totsz < (64 << 20)) {
ns->geom.pgaddrbytes = 3;
ns->geom.secaddrbytes = 2;
} else {
ns->geom.pgaddrbytes = 4;
ns->geom.secaddrbytes = 3;
}
} else {
if (ns->geom.totsz <= (128 << 20)) {
ns->geom.pgaddrbytes = 5;
ns->geom.secaddrbytes = 2;
} else {
ns->geom.pgaddrbytes = 5;
ns->geom.secaddrbytes = 3;
}
}
/* Detect how many ID bytes the NAND chip outputs */
for (i = 0; nand_flash_ids[i].name != NULL; i++) {
if (second_id_byte != nand_flash_ids[i].id)
continue;
if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR))
ns->options |= OPT_AUTOINCR;
}
if (ns->busw == 16)
NS_WARN("16-bit flashes support wasn't tested\n");
printk("flash size: %u MiB\n", ns->geom.totsz >> 20);
printk("page size: %u bytes\n", ns->geom.pgsz);
printk("OOB area size: %u bytes\n", ns->geom.oobsz);
printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
printk("pages number: %u\n", ns->geom.pgnum);
printk("pages per sector: %u\n", ns->geom.pgsec);
printk("bus width: %u\n", ns->busw);
printk("bits in sector size: %u\n", ns->geom.secshift);
printk("bits in page size: %u\n", ns->geom.pgshift);
printk("bits in OOB size: %u\n", ns->geom.oobshift);
printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10);
printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
printk("options: %#x\n", ns->options);
/* Map / allocate and initialize the flash image */
#ifdef CONFIG_NS_ABS_POS
ns->mem.byte = ioremap(CONFIG_NS_ABS_POS, ns->geom.totszoob);
if (!ns->mem.byte) {
NS_ERR("init_nandsim: failed to map the NAND flash image at address %p\n",
(void *)CONFIG_NS_ABS_POS);
return -ENOMEM;
}
#else
ns->mem.byte = vmalloc(ns->geom.totszoob);
if (!ns->mem.byte) {
NS_ERR("init_nandsim: unable to allocate %u bytes for flash image\n",
ns->geom.totszoob);
return -ENOMEM;
}
memset(ns->mem.byte, 0xFF, ns->geom.totszoob);
#endif
/* Allocate / initialize the internal buffer */
ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
if (!ns->buf.byte) {
NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
ns->geom.pgszoob);
goto error;
}
memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
/* Fill the partition_info structure */
ns->part.name = "NAND simulator partition";
ns->part.offset = 0;
ns->part.size = ns->geom.totsz;
return 0;
error:
#ifdef CONFIG_NS_ABS_POS
iounmap(ns->mem.byte);
#else
vfree(ns->mem.byte);
#endif
return -ENOMEM;
}
/*
* Free the nandsim structure.
*/
static void
free_nandsim(struct nandsim *ns)
{
kfree(ns->buf.byte);
#ifdef CONFIG_NS_ABS_POS
iounmap(ns->mem.byte);
#else
vfree(ns->mem.byte);
#endif
return;
}
/*
* Returns the string representation of 'state' state.
*/
static char *
get_state_name(uint32_t state)
{
switch (NS_STATE(state)) {
case STATE_CMD_READ0:
return "STATE_CMD_READ0";
case STATE_CMD_READ1:
return "STATE_CMD_READ1";
case STATE_CMD_PAGEPROG:
return "STATE_CMD_PAGEPROG";
case STATE_CMD_READOOB:
return "STATE_CMD_READOOB";
case STATE_CMD_READSTART:
return "STATE_CMD_READSTART";
case STATE_CMD_ERASE1:
return "STATE_CMD_ERASE1";
case STATE_CMD_STATUS:
return "STATE_CMD_STATUS";
case STATE_CMD_STATUS_M:
return "STATE_CMD_STATUS_M";
case STATE_CMD_SEQIN:
return "STATE_CMD_SEQIN";
case STATE_CMD_READID:
return "STATE_CMD_READID";
case STATE_CMD_ERASE2:
return "STATE_CMD_ERASE2";
case STATE_CMD_RESET:
return "STATE_CMD_RESET";
case STATE_ADDR_PAGE:
return "STATE_ADDR_PAGE";
case STATE_ADDR_SEC:
return "STATE_ADDR_SEC";
case STATE_ADDR_ZERO:
return "STATE_ADDR_ZERO";
case STATE_DATAIN:
return "STATE_DATAIN";
case STATE_DATAOUT:
return "STATE_DATAOUT";
case STATE_DATAOUT_ID:
return "STATE_DATAOUT_ID";
case STATE_DATAOUT_STATUS:
return "STATE_DATAOUT_STATUS";
case STATE_DATAOUT_STATUS_M:
return "STATE_DATAOUT_STATUS_M";
case STATE_READY:
return "STATE_READY";
case STATE_UNKNOWN:
return "STATE_UNKNOWN";
}
NS_ERR("get_state_name: unknown state, BUG\n");
return NULL;
}
/*
* Check if command is valid.
*
* RETURNS: 1 if wrong command, 0 if right.
*/
static int
check_command(int cmd)
{
switch (cmd) {
case NAND_CMD_READ0:
case NAND_CMD_READSTART:
case NAND_CMD_PAGEPROG:
case NAND_CMD_READOOB:
case NAND_CMD_ERASE1:
case NAND_CMD_STATUS:
case NAND_CMD_SEQIN:
case NAND_CMD_READID:
case NAND_CMD_ERASE2:
case NAND_CMD_RESET:
case NAND_CMD_READ1:
return 0;
case NAND_CMD_STATUS_MULTI:
default:
return 1;
}
}
/*
* Returns state after command is accepted by command number.
*/
static uint32_t
get_state_by_command(unsigned command)
{
switch (command) {
case NAND_CMD_READ0:
return STATE_CMD_READ0;
case NAND_CMD_READ1:
return STATE_CMD_READ1;
case NAND_CMD_PAGEPROG:
return STATE_CMD_PAGEPROG;
case NAND_CMD_READSTART:
return STATE_CMD_READSTART;
case NAND_CMD_READOOB:
return STATE_CMD_READOOB;
case NAND_CMD_ERASE1:
return STATE_CMD_ERASE1;
case NAND_CMD_STATUS:
return STATE_CMD_STATUS;
case NAND_CMD_STATUS_MULTI:
return STATE_CMD_STATUS_M;
case NAND_CMD_SEQIN:
return STATE_CMD_SEQIN;
case NAND_CMD_READID:
return STATE_CMD_READID;
case NAND_CMD_ERASE2:
return STATE_CMD_ERASE2;
case NAND_CMD_RESET:
return STATE_CMD_RESET;
}
NS_ERR("get_state_by_command: unknown command, BUG\n");
return 0;
}
/*
* Move an address byte to the correspondent internal register.
*/
static inline void
accept_addr_byte(struct nandsim *ns, u_char bt)
{
uint byte = (uint)bt;
if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes))
ns->regs.column |= (byte << 8 * ns->regs.count);
else {
ns->regs.row |= (byte << 8 * (ns->regs.count -
ns->geom.pgaddrbytes +
ns->geom.secaddrbytes));
}
return;
}
/*
* Switch to STATE_READY state.
*/
static inline void
switch_to_ready_state(struct nandsim *ns, u_char status)
{
NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY));
ns->state = STATE_READY;
ns->nxstate = STATE_UNKNOWN;
ns->op = NULL;
ns->npstates = 0;
ns->stateidx = 0;
ns->regs.num = 0;
ns->regs.count = 0;
ns->regs.off = 0;
ns->regs.row = 0;
ns->regs.column = 0;
ns->regs.status = status;
}
/*
* If the operation isn't known yet, try to find it in the global array
* of supported operations.
*
* Operation can be unknown because of the following.
* 1. New command was accepted and this is the firs call to find the
* correspondent states chain. In this case ns->npstates = 0;
* 2. There is several operations which begin with the same command(s)
* (for example program from the second half and read from the
* second half operations both begin with the READ1 command). In this
* case the ns->pstates[] array contains previous states.
*
* Thus, the function tries to find operation containing the following
* states (if the 'flag' parameter is 0):
* ns->pstates[0], ... ns->pstates[ns->npstates], ns->state
*
* If (one and only one) matching operation is found, it is accepted (
* ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
* zeroed).
*
* If there are several maches, the current state is pushed to the
* ns->pstates.
*
* The operation can be unknown only while commands are input to the chip.
* As soon as address command is accepted, the operation must be known.
* In such situation the function is called with 'flag' != 0, and the
* operation is searched using the following pattern:
* ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
*
* It is supposed that this pattern must either match one operation on
* none. There can't be ambiguity in that case.
*
* If no matches found, the functions does the following:
* 1. if there are saved states present, try to ignore them and search
* again only using the last command. If nothing was found, switch
* to the STATE_READY state.
* 2. if there are no saved states, switch to the STATE_READY state.
*
* RETURNS: -2 - no matched operations found.
* -1 - several matches.
* 0 - operation is found.
*/
static int
find_operation(struct nandsim *ns, uint32_t flag)
{
int opsfound = 0;
int i, j, idx = 0;
for (i = 0; i < NS_OPER_NUM; i++) {
int found = 1;
if (!(ns->options & ops[i].reqopts))
/* Ignore operations we can't perform */
continue;
if (flag) {
if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK))
continue;
} else {
if (NS_STATE(ns->state) != NS_STATE(ops[i].states[ns->npstates]))
continue;
}
for (j = 0; j < ns->npstates; j++)
if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j])
&& (ns->options & ops[idx].reqopts)) {
found = 0;
break;
}
if (found) {
idx = i;
opsfound += 1;
}
}
if (opsfound == 1) {
/* Exact match */
ns->op = &ops[idx].states[0];
if (flag) {
/*
* In this case the find_operation function was
* called when address has just began input. But it isn't
* yet fully input and the current state must
* not be one of STATE_ADDR_*, but the STATE_ADDR_*
* state must be the next state (ns->nxstate).
*/
ns->stateidx = ns->npstates - 1;
} else {
ns->stateidx = ns->npstates;
}
ns->npstates = 0;
ns->state = ns->op[ns->stateidx];
ns->nxstate = ns->op[ns->stateidx + 1];
NS_DBG("find_operation: operation found, index: %d, state: %s, nxstate %s\n",
idx, get_state_name(ns->state), get_state_name(ns->nxstate));
return 0;
}
if (opsfound == 0) {
/* Nothing was found. Try to ignore previous commands (if any) and search again */
if (ns->npstates != 0) {
NS_DBG("find_operation: no operation found, try again with state %s\n",
get_state_name(ns->state));
ns->npstates = 0;
return find_operation(ns, 0);
}
NS_DBG("find_operation: no operations found\n");
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return -2;
}
if (flag) {
/* This shouldn't happen */
NS_DBG("find_operation: BUG, operation must be known if address is input\n");
return -2;
}
NS_DBG("find_operation: there is still ambiguity\n");
ns->pstates[ns->npstates++] = ns->state;
return -1;
}
/*
* If state has any action bit, perform this action.
*
* RETURNS: 0 if success, -1 if error.
*/
static int
do_state_action(struct nandsim *ns, uint32_t action)
{
int i, num;
int busdiv = ns->busw == 8 ? 1 : 2;
action &= ACTION_MASK;
/* Check that page address input is correct */
if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) {
NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row);
return -1;
}
switch (action) {
case ACTION_CPY:
/*
* Copy page data to the internal buffer.
*/
/* Column shouldn't be very large */
if (ns->regs.column >= (ns->geom.pgszoob - ns->regs.off)) {
NS_ERR("do_state_action: column number is too large\n");
break;
}
num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
memcpy(ns->buf.byte, ns->mem.byte + NS_RAW_OFFSET(ns) + ns->regs.off, num);
NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
num, NS_RAW_OFFSET(ns) + ns->regs.off);
if (ns->regs.off == 0)
NS_LOG("read page %d\n", ns->regs.row);
else if (ns->regs.off < ns->geom.pgsz)
NS_LOG("read page %d (second half)\n", ns->regs.row);
else
NS_LOG("read OOB of page %d\n", ns->regs.row);
NS_UDELAY(access_delay);
NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv);
break;
case ACTION_SECERASE:
/*
* Erase sector.
*/
if (ns->lines.wp) {
NS_ERR("do_state_action: device is write-protected, ignore sector erase\n");
return -1;
}
if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec
|| (ns->regs.row & ~(ns->geom.secsz - 1))) {
NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row);
return -1;
}
ns->regs.row = (ns->regs.row <<
8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column;
ns->regs.column = 0;
NS_DBG("do_state_action: erase sector at address %#x, off = %d\n",
ns->regs.row, NS_RAW_OFFSET(ns));
NS_LOG("erase sector %d\n", ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift));
memset(ns->mem.byte + NS_RAW_OFFSET(ns), 0xFF, ns->geom.secszoob);
NS_MDELAY(erase_delay);
break;
case ACTION_PRGPAGE:
/*
* Programm page - move internal buffer data to the page.
*/
if (ns->lines.wp) {
NS_WARN("do_state_action: device is write-protected, programm\n");
return -1;
}
num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
if (num != ns->regs.count) {
NS_ERR("do_state_action: too few bytes were input (%d instead of %d)\n",
ns->regs.count, num);
return -1;
}
for (i = 0; i < num; i++)
ns->mem.byte[NS_RAW_OFFSET(ns) + ns->regs.off + i] &= ns->buf.byte[i];
NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
NS_LOG("programm page %d\n", ns->regs.row);
NS_UDELAY(programm_delay);
NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv);
break;
case ACTION_ZEROOFF:
NS_DBG("do_state_action: set internal offset to 0\n");
ns->regs.off = 0;
break;
case ACTION_HALFOFF:
if (!(ns->options & OPT_PAGE512_8BIT)) {
NS_ERR("do_state_action: BUG! can't skip half of page for non-512"
"byte page size 8x chips\n");
return -1;
}
NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz/2);
ns->regs.off = ns->geom.pgsz/2;
break;
case ACTION_OOBOFF:
NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz);
ns->regs.off = ns->geom.pgsz;
break;
default:
NS_DBG("do_state_action: BUG! unknown action\n");
}
return 0;
}
/*
* Switch simulator's state.
*/
static void
switch_state(struct nandsim *ns)
{
if (ns->op) {
/*
* The current operation have already been identified.
* Just follow the states chain.
*/
ns->stateidx += 1;
ns->state = ns->nxstate;
ns->nxstate = ns->op[ns->stateidx + 1];
NS_DBG("switch_state: operation is known, switch to the next state, "
"state: %s, nxstate: %s\n",
get_state_name(ns->state), get_state_name(ns->nxstate));
/* See, whether we need to do some action */
if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
} else {
/*
* We don't yet know which operation we perform.
* Try to identify it.
*/
/*
* The only event causing the switch_state function to
* be called with yet unknown operation is new command.
*/
ns->state = get_state_by_command(ns->regs.command);
NS_DBG("switch_state: operation is unknown, try to find it\n");
if (find_operation(ns, 0) != 0)
return;
if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
}
/* For 16x devices column means the page offset in words */
if ((ns->nxstate & STATE_ADDR_MASK) && ns->busw == 16) {
NS_DBG("switch_state: double the column number for 16x device\n");
ns->regs.column <<= 1;
}
if (NS_STATE(ns->nxstate) == STATE_READY) {
/*
* The current state is the last. Return to STATE_READY
*/
u_char status = NS_STATUS_OK(ns);
/* In case of data states, see if all bytes were input/output */
if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK))
&& ns->regs.count != ns->regs.num) {
NS_WARN("switch_state: not all bytes were processed, %d left\n",
ns->regs.num - ns->regs.count);
status = NS_STATUS_FAILED(ns);
}
NS_DBG("switch_state: operation complete, switch to STATE_READY state\n");
switch_to_ready_state(ns, status);
return;
} else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) {
/*
* If the next state is data input/output, switch to it now
*/
ns->state = ns->nxstate;
ns->nxstate = ns->op[++ns->stateidx + 1];
ns->regs.num = ns->regs.count = 0;
NS_DBG("switch_state: the next state is data I/O, switch, "
"state: %s, nxstate: %s\n",
get_state_name(ns->state), get_state_name(ns->nxstate));
/*
* Set the internal register to the count of bytes which
* are expected to be input or output
*/
switch (NS_STATE(ns->state)) {
case STATE_DATAIN:
case STATE_DATAOUT:
ns->regs.num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
break;
case STATE_DATAOUT_ID:
ns->regs.num = ns->geom.idbytes;
break;
case STATE_DATAOUT_STATUS:
case STATE_DATAOUT_STATUS_M:
ns->regs.count = ns->regs.num = 0;
break;
default:
NS_ERR("switch_state: BUG! unknown data state\n");
}
} else if (ns->nxstate & STATE_ADDR_MASK) {
/*
* If the next state is address input, set the internal
* register to the number of expected address bytes
*/
ns->regs.count = 0;
switch (NS_STATE(ns->nxstate)) {
case STATE_ADDR_PAGE:
ns->regs.num = ns->geom.pgaddrbytes;
break;
case STATE_ADDR_SEC:
ns->regs.num = ns->geom.secaddrbytes;
break;
case STATE_ADDR_ZERO:
ns->regs.num = 1;
break;
default:
NS_ERR("switch_state: BUG! unknown address state\n");
}
} else {
/*
* Just reset internal counters.
*/
ns->regs.num = 0;
ns->regs.count = 0;
}
}
static void
ns_hwcontrol(struct mtd_info *mtd, int cmd)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
switch (cmd) {
/* set CLE line high */
case NAND_CTL_SETCLE:
NS_DBG("ns_hwcontrol: start command latch cycles\n");
ns->lines.cle = 1;
break;
/* set CLE line low */
case NAND_CTL_CLRCLE:
NS_DBG("ns_hwcontrol: stop command latch cycles\n");
ns->lines.cle = 0;
break;
/* set ALE line high */
case NAND_CTL_SETALE:
NS_DBG("ns_hwcontrol: start address latch cycles\n");
ns->lines.ale = 1;
break;
/* set ALE line low */
case NAND_CTL_CLRALE:
NS_DBG("ns_hwcontrol: stop address latch cycles\n");
ns->lines.ale = 0;
break;
/* set WP line high */
case NAND_CTL_SETWP:
NS_DBG("ns_hwcontrol: enable write protection\n");
ns->lines.wp = 1;
break;
/* set WP line low */
case NAND_CTL_CLRWP:
NS_DBG("ns_hwcontrol: disable write protection\n");
ns->lines.wp = 0;
break;
/* set CE line low */
case NAND_CTL_SETNCE:
NS_DBG("ns_hwcontrol: enable chip\n");
ns->lines.ce = 1;
break;
/* set CE line high */
case NAND_CTL_CLRNCE:
NS_DBG("ns_hwcontrol: disable chip\n");
ns->lines.ce = 0;
break;
default:
NS_ERR("hwcontrol: unknown command\n");
}
return;
}
static u_char
ns_nand_read_byte(struct mtd_info *mtd)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
u_char outb = 0x00;
/* Sanity and correctness checks */
if (!ns->lines.ce) {
NS_ERR("read_byte: chip is disabled, return %#x\n", (uint)outb);
return outb;
}
if (ns->lines.ale || ns->lines.cle) {
NS_ERR("read_byte: ALE or CLE pin is high, return %#x\n", (uint)outb);
return outb;
}
if (!(ns->state & STATE_DATAOUT_MASK)) {
NS_WARN("read_byte: unexpected data output cycle, state is %s "
"return %#x\n", get_state_name(ns->state), (uint)outb);
return outb;
}
/* Status register may be read as many times as it is wanted */
if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS) {
NS_DBG("read_byte: return %#x status\n", ns->regs.status);
return ns->regs.status;
}
/* Check if there is any data in the internal buffer which may be read */
if (ns->regs.count == ns->regs.num) {
NS_WARN("read_byte: no more data to output, return %#x\n", (uint)outb);
return outb;
}
switch (NS_STATE(ns->state)) {
case STATE_DATAOUT:
if (ns->busw == 8) {
outb = ns->buf.byte[ns->regs.count];
ns->regs.count += 1;
} else {
outb = (u_char)cpu_to_le16(ns->buf.word[ns->regs.count >> 1]);
ns->regs.count += 2;
}
break;
case STATE_DATAOUT_ID:
NS_DBG("read_byte: read ID byte %d, total = %d\n", ns->regs.count, ns->regs.num);
outb = ns->ids[ns->regs.count];
ns->regs.count += 1;
break;
default:
BUG();
}
if (ns->regs.count == ns->regs.num) {
NS_DBG("read_byte: all bytes were read\n");
/*
* The OPT_AUTOINCR allows to read next conseqitive pages without
* new read operation cycle.
*/
if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
ns->regs.count = 0;
if (ns->regs.row + 1 < ns->geom.pgnum)
ns->regs.row += 1;
NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row);
do_state_action(ns, ACTION_CPY);
}
else if (NS_STATE(ns->nxstate) == STATE_READY)
switch_state(ns);
}
return outb;
}
static void
ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
/* Sanity and correctness checks */
if (!ns->lines.ce) {
NS_ERR("write_byte: chip is disabled, ignore write\n");
return;
}
if (ns->lines.ale && ns->lines.cle) {
NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n");
return;
}
if (ns->lines.cle == 1) {
/*
* The byte written is a command.
*/
if (byte == NAND_CMD_RESET) {
NS_LOG("reset chip\n");
switch_to_ready_state(ns, NS_STATUS_OK(ns));
return;
}
/*
* Chip might still be in STATE_DATAOUT
* (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
* STATE_DATAOUT_STATUS_M state. If so, switch state.
*/
if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
|| ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT))
switch_state(ns);
/* Check if chip is expecting command */
if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
/*
* We are in situation when something else (not command)
* was expected but command was input. In this case ignore
* previous command(s)/state(s) and accept the last one.
*/
NS_WARN("write_byte: command (%#x) wasn't expected, expected state is %s, "
"ignore previous states\n", (uint)byte, get_state_name(ns->nxstate));
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
}
/* Check that the command byte is correct */
if (check_command(byte)) {
NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
return;
}
NS_DBG("command byte corresponding to %s state accepted\n",
get_state_name(get_state_by_command(byte)));
ns->regs.command = byte;
switch_state(ns);
} else if (ns->lines.ale == 1) {
/*
* The byte written is an address.
*/
if (NS_STATE(ns->nxstate) == STATE_UNKNOWN) {
NS_DBG("write_byte: operation isn't known yet, identify it\n");
if (find_operation(ns, 1) < 0)
return;
if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
ns->regs.count = 0;
switch (NS_STATE(ns->nxstate)) {
case STATE_ADDR_PAGE:
ns->regs.num = ns->geom.pgaddrbytes;
break;
case STATE_ADDR_SEC:
ns->regs.num = ns->geom.secaddrbytes;
break;
case STATE_ADDR_ZERO:
ns->regs.num = 1;
break;
default:
BUG();
}
}
/* Check that chip is expecting address */
if (!(ns->nxstate & STATE_ADDR_MASK)) {
NS_ERR("write_byte: address (%#x) isn't expected, expected state is %s, "
"switch to STATE_READY\n", (uint)byte, get_state_name(ns->nxstate));
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
/* Check if this is expected byte */
if (ns->regs.count == ns->regs.num) {
NS_ERR("write_byte: no more address bytes expected\n");
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
accept_addr_byte(ns, byte);
ns->regs.count += 1;
NS_DBG("write_byte: address byte %#x was accepted (%d bytes input, %d expected)\n",
(uint)byte, ns->regs.count, ns->regs.num);
if (ns->regs.count == ns->regs.num) {
NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column);
switch_state(ns);
}
} else {
/*
* The byte written is an input data.
*/
/* Check that chip is expecting data input */
if (!(ns->state & STATE_DATAIN_MASK)) {
NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, "
"switch to %s\n", (uint)byte,
get_state_name(ns->state), get_state_name(STATE_READY));
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
/* Check if this is expected byte */
if (ns->regs.count == ns->regs.num) {
NS_WARN("write_byte: %u input bytes has already been accepted, ignore write\n",
ns->regs.num);
return;
}
if (ns->busw == 8) {
ns->buf.byte[ns->regs.count] = byte;
ns->regs.count += 1;
} else {
ns->buf.word[ns->regs.count >> 1] = cpu_to_le16((uint16_t)byte);
ns->regs.count += 2;
}
}
return;
}
static int
ns_device_ready(struct mtd_info *mtd)
{
NS_DBG("device_ready\n");
return 1;
}
static uint16_t
ns_nand_read_word(struct mtd_info *mtd)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
NS_DBG("read_word\n");
return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8);
}
static void
ns_nand_write_word(struct mtd_info *mtd, uint16_t word)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
NS_DBG("write_word\n");
chip->write_byte(mtd, word & 0xFF);
chip->write_byte(mtd, word >> 8);
}
static void
ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
/* Check that chip is expecting data input */
if (!(ns->state & STATE_DATAIN_MASK)) {
NS_ERR("write_buf: data input isn't expected, state is %s, "
"switch to STATE_READY\n", get_state_name(ns->state));
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
/* Check if these are expected bytes */
if (ns->regs.count + len > ns->regs.num) {
NS_ERR("write_buf: too many input bytes\n");
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
memcpy(ns->buf.byte + ns->regs.count, buf, len);
ns->regs.count += len;
if (ns->regs.count == ns->regs.num) {
NS_DBG("write_buf: %d bytes were written\n", ns->regs.count);
}
}
static void
ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
/* Sanity and correctness checks */
if (!ns->lines.ce) {
NS_ERR("read_buf: chip is disabled\n");
return;
}
if (ns->lines.ale || ns->lines.cle) {
NS_ERR("read_buf: ALE or CLE pin is high\n");
return;
}
if (!(ns->state & STATE_DATAOUT_MASK)) {
NS_WARN("read_buf: unexpected data output cycle, current state is %s\n",
get_state_name(ns->state));
return;
}
if (NS_STATE(ns->state) != STATE_DATAOUT) {
int i;
for (i = 0; i < len; i++)
buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd);
return;
}
/* Check if these are expected bytes */
if (ns->regs.count + len > ns->regs.num) {
NS_ERR("read_buf: too many bytes to read\n");
switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
return;
}
memcpy(buf, ns->buf.byte + ns->regs.count, len);
ns->regs.count += len;
if (ns->regs.count == ns->regs.num) {
if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) {
ns->regs.count = 0;
if (ns->regs.row + 1 < ns->geom.pgnum)
ns->regs.row += 1;
NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row);
do_state_action(ns, ACTION_CPY);
}
else if (NS_STATE(ns->nxstate) == STATE_READY)
switch_state(ns);
}
return;
}
static int
ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
ns_nand_read_buf(mtd, (u_char *)&ns_verify_buf[0], len);
if (!memcmp(buf, &ns_verify_buf[0], len)) {
NS_DBG("verify_buf: the buffer is OK\n");
return 0;
} else {
NS_DBG("verify_buf: the buffer is wrong\n");
return -EFAULT;
}
}
/*
* Module initialization function
*/
int __init ns_init_module(void)
{
struct nand_chip *chip;
struct nandsim *nand;
int retval = -ENOMEM;
if (bus_width != 8 && bus_width != 16) {
NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
return -EINVAL;
}
/* Allocate and initialize mtd_info, nand_chip and nandsim structures */
nsmtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
+ sizeof(struct nandsim), GFP_KERNEL);
if (!nsmtd) {
NS_ERR("unable to allocate core structures.\n");
return -ENOMEM;
}
memset(nsmtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip) +
sizeof(struct nandsim));
chip = (struct nand_chip *)(nsmtd + 1);
nsmtd->priv = (void *)chip;
nand = (struct nandsim *)(chip + 1);
chip->priv = (void *)nand;
/*
* Register simulator's callbacks.
*/
chip->hwcontrol = ns_hwcontrol;
chip->read_byte = ns_nand_read_byte;
chip->dev_ready = ns_device_ready;
chip->write_byte = ns_nand_write_byte;
chip->write_buf = ns_nand_write_buf;
chip->read_buf = ns_nand_read_buf;
chip->verify_buf = ns_nand_verify_buf;
chip->write_word = ns_nand_write_word;
chip->read_word = ns_nand_read_word;
chip->eccmode = NAND_ECC_SOFT;
chip->options |= NAND_SKIP_BBTSCAN;
/*
* Perform minimum nandsim structure initialization to handle
* the initial ID read command correctly
*/
if (third_id_byte != 0xFF || fourth_id_byte != 0xFF)
nand->geom.idbytes = 4;
else
nand->geom.idbytes = 2;
nand->regs.status = NS_STATUS_OK(nand);
nand->nxstate = STATE_UNKNOWN;
nand->options |= OPT_PAGE256; /* temporary value */
nand->ids[0] = first_id_byte;
nand->ids[1] = second_id_byte;
nand->ids[2] = third_id_byte;
nand->ids[3] = fourth_id_byte;
if (bus_width == 16) {
nand->busw = 16;
chip->options |= NAND_BUSWIDTH_16;
}
if ((retval = nand_scan(nsmtd, 1)) != 0) {
NS_ERR("can't register NAND Simulator\n");
if (retval > 0)
retval = -ENXIO;
goto error;
}
if ((retval = init_nandsim(nsmtd)) != 0) {
NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
goto error;
}
if ((retval = nand_default_bbt(nsmtd)) != 0) {
free_nandsim(nand);
goto error;
}
/* Register NAND as one big partition */
add_mtd_partitions(nsmtd, &nand->part, 1);
return 0;
error:
kfree(nsmtd);
return retval;
}
module_init(ns_init_module);
/*
* Module clean-up function
*/
static void __exit ns_cleanup_module(void)
{
struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv);
free_nandsim(ns); /* Free nandsim private resources */
nand_release(nsmtd); /* Unregisterd drived */
kfree(nsmtd); /* Free other structures */
}
module_exit(ns_cleanup_module);
MODULE_LICENSE ("GPL");
MODULE_AUTHOR ("Artem B. Bityuckiy");
MODULE_DESCRIPTION ("The NAND flash simulator");
