/* bw2.c: BWTWO frame buffer driver
*
* Copyright (C) 2003 David S. Miller (davem@redhat.com)
* Copyright (C) 1996,1998 Jakub Jelinek (jj@ultra.linux.cz)
* Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
*
* Driver layout based loosely on tgafb.c, see that file for credits.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/sbus.h>
#include <asm/oplib.h>
#include <asm/fbio.h>
#ifdef CONFIG_SPARC32
#include <asm/sun4paddr.h>
#endif
#include "sbuslib.h"
/*
* Local functions.
*/
static int bw2_blank(int, struct fb_info *);
static int bw2_mmap(struct fb_info *, struct file *, struct vm_area_struct *);
static int bw2_ioctl(struct inode *, struct file *, unsigned int,
unsigned long, struct fb_info *);
/*
* Frame buffer operations
*/
static struct fb_ops bw2_ops = {
.owner = THIS_MODULE,
.fb_blank = bw2_blank,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_mmap = bw2_mmap,
.fb_ioctl = bw2_ioctl,
};
/* OBio addresses for the bwtwo registers */
#define BWTWO_REGISTER_OFFSET 0x400000
struct bt_regs {
volatile u32 addr;
volatile u32 color_map;
volatile u32 control;
volatile u32 cursor;
};
struct bw2_regs {
struct bt_regs cmap;
volatile u8 control;
volatile u8 status;
volatile u8 cursor_start;
volatile u8 cursor_end;
volatile u8 h_blank_start;
volatile u8 h_blank_end;
volatile u8 h_sync_start;
volatile u8 h_sync_end;
volatile u8 comp_sync_end;
volatile u8 v_blank_start_high;
volatile u8 v_blank_start_low;
volatile u8 v_blank_end;
volatile u8 v_sync_start;
volatile u8 v_sync_end;
volatile u8 xfer_holdoff_start;
volatile u8 xfer_holdoff_end;
};
/* Status Register Constants */
#define BWTWO_SR_RES_MASK 0x70
#define BWTWO_SR_1600_1280 0x50
#define BWTWO_SR_1152_900_76_A 0x40
#define BWTWO_SR_1152_900_76_B 0x60
#define BWTWO_SR_ID_MASK 0x0f
#define BWTWO_SR_ID_MONO 0x02
#define BWTWO_SR_ID_MONO_ECL 0x03
#define BWTWO_SR_ID_MSYNC 0x04
#define BWTWO_SR_ID_NOCONN 0x0a
/* Control Register Constants */
#define BWTWO_CTL_ENABLE_INTS 0x80
#define BWTWO_CTL_ENABLE_VIDEO 0x40
#define BWTWO_CTL_ENABLE_TIMING 0x20
#define BWTWO_CTL_ENABLE_CURCMP 0x10
#define BWTWO_CTL_XTAL_MASK 0x0C
#define BWTWO_CTL_DIVISOR_MASK 0x03
/* Status Register Constants */
#define BWTWO_STAT_PENDING_INT 0x80
#define BWTWO_STAT_MSENSE_MASK 0x70
#define BWTWO_STAT_ID_MASK 0x0f
struct bw2_par {
spinlock_t lock;
struct bw2_regs __iomem *regs;
u32 flags;
#define BW2_FLAG_BLANKED 0x00000001
unsigned long physbase;
unsigned long fbsize;
struct sbus_dev *sdev;
struct list_head list;
};
/**
* bw2_blank - Optional function. Blanks the display.
* @blank_mode: the blank mode we want.
* @info: frame buffer structure that represents a single frame buffer
*/
static int
bw2_blank(int blank, struct fb_info *info)
{
struct bw2_par *par = (struct bw2_par *) info->par;
struct bw2_regs __iomem *regs = par->regs;
unsigned long flags;
u8 val;
spin_lock_irqsave(&par->lock, flags);
switch (blank) {
case FB_BLANK_UNBLANK: /* Unblanking */
val = sbus_readb(®s->control);
val |= BWTWO_CTL_ENABLE_VIDEO;
sbus_writeb(val, ®s->control);
par->flags &= ~BW2_FLAG_BLANKED;
break;
case FB_BLANK_NORMAL: /* Normal blanking */
case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */
case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */
case FB_BLANK_POWERDOWN: /* Poweroff */
val = sbus_readb(®s->control);
val &= ~BWTWO_CTL_ENABLE_VIDEO;
sbus_writeb(val, ®s->control);
par->flags |= BW2_FLAG_BLANKED;
break;
}
spin_unlock_irqrestore(&par->lock, flags);
return 0;
}
static struct sbus_mmap_map bw2_mmap_map[] = {
{
.size = SBUS_MMAP_FBSIZE(1)
},
{ .size = 0 }
};
static int bw2_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma)
{
struct bw2_par *par = (struct bw2_par *)info->par;
return sbusfb_mmap_helper(bw2_mmap_map,
par->physbase, par->fbsize,
(par->sdev ?
par->sdev->reg_addrs[0].which_io :
0),
vma);
}
static int bw2_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg, struct fb_info *info)
{
struct bw2_par *par = (struct bw2_par *) info->par;
return sbusfb_ioctl_helper(cmd, arg, info,
FBTYPE_SUN2BW, 1, par->fbsize);
}
/*
* Initialisation
*/
static void
bw2_init_fix(struct fb_info *info, int linebytes)
{
strlcpy(info->fix.id, "bwtwo", sizeof(info->fix.id));
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = FB_VISUAL_MONO01;
info->fix.line_length = linebytes;
info->fix.accel = FB_ACCEL_SUN_BWTWO;
}
static u8 bw2regs_1600[] __initdata = {
0x14, 0x8b, 0x15, 0x28, 0x16, 0x03, 0x17, 0x13,
0x18, 0x7b, 0x19, 0x05, 0x1a, 0x34, 0x1b, 0x2e,
0x1c, 0x00, 0x1d, 0x0a, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x21, 0
};
static u8 bw2regs_ecl[] __initdata = {
0x14, 0x65, 0x15, 0x1e, 0x16, 0x04, 0x17, 0x0c,
0x18, 0x5e, 0x19, 0x03, 0x1a, 0xa7, 0x1b, 0x23,
0x1c, 0x00, 0x1d, 0x08, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x20, 0
};
static u8 bw2regs_analog[] __initdata = {
0x14, 0xbb, 0x15, 0x2b, 0x16, 0x03, 0x17, 0x13,
0x18, 0xb0, 0x19, 0x03, 0x1a, 0xa6, 0x1b, 0x22,
0x1c, 0x01, 0x1d, 0x05, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x20, 0
};
static u8 bw2regs_76hz[] __initdata = {
0x14, 0xb7, 0x15, 0x27, 0x16, 0x03, 0x17, 0x0f,
0x18, 0xae, 0x19, 0x03, 0x1a, 0xae, 0x1b, 0x2a,
0x1c, 0x01, 0x1d, 0x09, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x24, 0
};
static u8 bw2regs_66hz[] __initdata = {
0x14, 0xbb, 0x15, 0x2b, 0x16, 0x04, 0x17, 0x14,
0x18, 0xae, 0x19, 0x03, 0x1a, 0xa8, 0x1b, 0x24,
0x1c, 0x01, 0x1d, 0x05, 0x1e, 0xff, 0x1f, 0x01,
0x10, 0x20, 0
};
static void bw2_do_default_mode(struct bw2_par *par, struct fb_info *info,
int *linebytes)
{
u8 status, mon;
u8 *p;
status = sbus_readb(&par->regs->status);
mon = status & BWTWO_SR_RES_MASK;
switch (status & BWTWO_SR_ID_MASK) {
case BWTWO_SR_ID_MONO_ECL:
if (mon == BWTWO_SR_1600_1280) {
p = bw2regs_1600;
info->var.xres = info->var.xres_virtual = 1600;
info->var.yres = info->var.yres_virtual = 1280;
*linebytes = 1600 / 8;
} else
p = bw2regs_ecl;
break;
case BWTWO_SR_ID_MONO:
p = bw2regs_analog;
break;
case BWTWO_SR_ID_MSYNC:
if (mon == BWTWO_SR_1152_900_76_A ||
mon == BWTWO_SR_1152_900_76_B)
p = bw2regs_76hz;
else
p = bw2regs_66hz;
break;
case BWTWO_SR_ID_NOCONN:
return;
default:
prom_printf("bw2: can't handle SR %02x\n",
status);
prom_halt();
}
for ( ; *p; p += 2) {
u8 __iomem *regp = &((u8 __iomem *)par->regs)[p[0]];
sbus_writeb(p[1], regp);
}
}
struct all_info {
struct fb_info info;
struct bw2_par par;
struct list_head list;
};
static LIST_HEAD(bw2_list);
static void bw2_init_one(struct sbus_dev *sdev)
{
struct all_info *all;
struct resource *resp;
#ifdef CONFIG_SUN4
struct resource res;
#endif
int linebytes;
all = kmalloc(sizeof(*all), GFP_KERNEL);
if (!all) {
printk(KERN_ERR "bw2: Cannot allocate memory.\n");
return;
}
memset(all, 0, sizeof(*all));
INIT_LIST_HEAD(&all->list);
spin_lock_init(&all->par.lock);
all->par.sdev = sdev;
#ifdef CONFIG_SUN4
if (!sdev) {
all->par.physbase = sun4_bwtwo_physaddr;
res.start = sun4_bwtwo_physaddr;
res.end = res.start + BWTWO_REGISTER_OFFSET + sizeof(struct bw2_regs) - 1;
res.flags = IORESOURCE_IO;
resp = &res;
all->info.var.xres = all->info.var.xres_virtual = 1152;
all->info.var.yres = all->info.var.yres_virtual = 900;
all->info.var.bits_per_pixel = 1;
linebytes = 1152 / 8;
} else
#else
{
if (!sdev)
BUG();
all->par.physbase = sdev->reg_addrs[0].phys_addr;
resp = &sdev->resource[0];
sbusfb_fill_var(&all->info.var, (sdev ? sdev->prom_node : 0), 1);
linebytes = prom_getintdefault(sdev->prom_node, "linebytes",
all->info.var.xres);
}
#endif
all->info.var.red.length = all->info.var.green.length =
all->info.var.blue.length = all->info.var.bits_per_pixel;
all->info.var.red.offset = all->info.var.green.offset =
all->info.var.blue.offset = 0;
all->par.regs = sbus_ioremap(resp, BWTWO_REGISTER_OFFSET,
sizeof(struct bw2_regs), "bw2 regs");
if (sdev && !prom_getbool(sdev->prom_node, "width"))
bw2_do_default_mode(&all->par, &all->info, &linebytes);
all->par.fbsize = PAGE_ALIGN(linebytes * all->info.var.yres);
all->info.flags = FBINFO_DEFAULT;
all->info.fbops = &bw2_ops;
#if defined(CONFIG_SPARC32)
if (sdev)
all->info.screen_base = (char __iomem *)
prom_getintdefault(sdev->prom_node, "address", 0);
#endif
if (!all->info.screen_base)
all->info.screen_base =
sbus_ioremap(resp, 0, all->par.fbsize, "bw2 ram");
all->info.par = &all->par;
bw2_blank(0, &all->info);
bw2_init_fix(&all->info, linebytes);
if (register_framebuffer(&all->info) < 0) {
printk(KERN_ERR "bw2: Could not register framebuffer.\n");
kfree(all);
return;
}
list_add(&all->list, &bw2_list);
printk("bw2: bwtwo at %lx:%lx\n",
(long) (sdev ? sdev->reg_addrs[0].which_io : 0),
(long) all->par.physbase);
}
int __init bw2_init(void)
{
struct sbus_bus *sbus;
struct sbus_dev *sdev;
if (fb_get_options("bw2fb", NULL))
return -ENODEV;
#ifdef CONFIG_SUN4
bw2_init_one(NULL);
#endif
for_all_sbusdev(sdev, sbus) {
if (!strcmp(sdev->prom_name, "bwtwo"))
bw2_init_one(sdev);
}
return 0;
}
void __exit bw2_exit(void)
{
struct list_head *pos, *tmp;
list_for_each_safe(pos, tmp, &bw2_list) {
struct all_info *all = list_entry(pos, typeof(*all), list);
unregister_framebuffer(&all->info);
kfree(all);
}
}
int __init
bw2_setup(char *arg)
{
/* No cmdline options yet... */
return 0;
}
module_init(bw2_init);
#ifdef MODULE
module_exit(bw2_exit);
#endif
MODULE_DESCRIPTION("framebuffer driver for BWTWO chipsets");
MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
MODULE_LICENSE("GPL");
