Merge tag 'iio-for-4.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes: First set of IIO new device support, features and cleanups in the 4.19 cycle The usual mixed bunch. Particular good to see is the generic touch screen driver. Will be interesting to see if this works for other ADCs without major changes. Core features * Channel types - New position relative channel type primarily for touch screen sensors to feed the generic touchscreen driver. New device support * ad5586 - Add support for the AD5311R DAC. * Generic touch screen driver as an IIO consumer. - Note this is in input, but due to dependencies is coming through the IIO tree. - Specific support for this added to the at91-sama5d2 ADC. - Various necessary DT bindings added. Staging Drops * ADIS16060 gyro - A device with a very odd interface that was never cleanly supported. It's now very difficult to get, so unlikely it'll ever be fixed up. Cleanups and minor features and fixes * core - Fix y2038 timestamp issues now the core support is in place. * 104-quad-8 - Provide some defines for magic numbers to help readability. - Fix an off by one error in register selection * ad7606 - Put in a missing function parameter name in a prototype. * adis16023 - Use generic sign_extend function rather than local version. * adis16240 - Use generic sign_extend funciton rather than local version. * at91-sama5d2 - Drop dependency on HAS_DMA now this is handled elsewhere. Will improve build test coverage. - Add oversampling ratio control. Note there is a minor ABI change here to increase the apparent depth to 14 bits so as to allow for transparent provision of different oversampling ratios that drop the actual bit depth to 13 or 12 bits. * hx711 - Add a MAINTAINERS entry for this device. * inv_mpu6050 - Replace the timestamp fifo 'special' code with generic timestamp handling. - Switch to using local store of timestamp divider rather than rate as that is more helpful for accurate time measurement. - Fix an unaligned access that didn't seem to be causing any trouble. - Use the fifo overflow bit to track the overflow status rather than a software counter. - New timestamping mechanism to deal with missed sample interrupts. * stm32-adc - Drop HAS_DMA build dependency. * sun4i-gpadc - Select REGMAP_IRQ a very rarely hit build issue fix.
author: Greg Kroah-Hartman 2018-06-26 01:47:37 +0200
committer: Greg Kroah-Hartman 2018-06-26 01:47:37 +0200
commit: f62252bf39445d4155c70871a8ce486f872d1442 (patch)
tree: ca366e3997bb5a631f37dfc6fd26ffc6245d5c9a
parent: Staging: comedi: comedi_compat32.h: fixed missing or malformed SPDX-License-I... (diff)
parent: iio: adc: at91-sama5d2_adc: add support for oversampling resolution (diff)
download: kernel-qcow2-linux-f62252bf39445d4155c70871a8ce486f872d1442.tar.gz
kernel-qcow2-linux-f62252bf39445d4155c70871a8ce486f872d1442.tar.xz
kernel-qcow2-linux-f62252bf39445d4155c70871a8ce486f872d1442.zip
29 files changed, 1225 insertions, 472 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 731146c3b138..c7353030670a 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -197,6 +197,18 @@ Description:
 		Angle of rotation. Units after application of scale and offset
 		are radians.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
+KernelVersion:	4.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Relative position in direction x or y on a pad (may be
+		arbitrarily assigned but should match other such assignments on
+		device).
+		Units after application of scale and offset are milli percents
+		from the pad's size in both directions. Should be calibrated by
+		the consumer.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 6469a4cd2a6d..4a3c1d496e1a 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -21,6 +21,14 @@ Optional properties:
   - dmas: Phandle to dma channel for the ADC.
   - dma-names: Must be "rx" when dmas property is being used.
   See ../../dma/dma.txt for details.
+  - #io-channel-cells: in case consumer drivers are attached, this must be 1.
+  See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details.
+
+Properties for consumer drivers:
+  - Consumer drivers can be connected to this producer device, as specified
+  in <Documentation/devicetree/bindings/iio/iio-bindings.txt>
+  - Channels exposed are specified in:
+  <dt-bindings/iio/adc/at91-sama5d2_adc.txt>
 
 Example:
 
@@ -38,4 +46,5 @@ adc: adc@fc030000 {
 	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
 	dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
 	dma-names = "rx";
+	#io-channel-cells = <1>;
 }
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
new file mode 100644
index 000000000000..51456c0e9a27
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
@@ -0,0 +1,30 @@
+Generic resistive touchscreen ADC
+
+Required properties:
+
+ - compatible: must be "resistive-adc-touch"
+The device must be connected to an ADC device that provides channels for
+position measurement and optional pressure.
+Refer to ../iio/iio-bindings.txt for details
+ - iio-channels: must have at least two channels connected to an ADC device.
+These should correspond to the channels exposed by the ADC device and should
+have the right index as the ADC device registers them. These channels
+represent the relative position on the "x" and "y" axes.
+ - iio-channel-names: must have all the channels' names. Mandatory channels
+are "x" and "y".
+
+Optional properties:
+ - iio-channels: The third channel named "pressure" is optional and can be
+used if the ADC device also measures pressure besides position.
+If this channel is missing, pressure will be ignored and the touchscreen
+will only report position.
+ - iio-channel-names: optional channel named "pressure".
+
+Example:
+
+	resistive_touch: resistive_touch {
+		compatible = "resistive-adc-touch";
+		touchscreen-min-pressure = <50000>;
+		io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+		io-channel-names = "x", "y", "pressure";
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
index 537643e86f61..d092d5d033a0 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -7,6 +7,9 @@ Optional properties for Touchscreens:
 				  (in pixels)
  - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
 				  dependent on the controller)
+ - touchscreen-min-pressure	: minimum pressure on the touchscreen to be
+				  achieved in order for the touchscreen
+				  driver to report a touch event.
  - touchscreen-fuzz-x		: horizontal noise value of the absolute input
 				  device (in pixels)
  - touchscreen-fuzz-y		: vertical noise value of the absolute input
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d5eeff51b5f..a21cadbf39e7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2547,6 +2547,13 @@ S:	Maintained
 F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
+AVIA HX711 ANALOG DIGITAL CONVERTER IIO DRIVER
+M:	Andreas Klinger <ak@it-klinger.de>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+F:	drivers/iio/adc/hx711.c
+
 AX.25 NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
@@ -6006,6 +6013,12 @@ F:	drivers/base/power/domain*.c
 F:	include/linux/pm_domain.h
 F:	Documentation/devicetree/bindings/power/power_domain.txt
 
+GENERIC RESISTIVE TOUCHSCREEN ADC DRIVER
+M:	Eugen Hristev <eugen.hristev@microchip.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/touchscreen/resistive-adc-touch.c
+
 GENERIC UIO DRIVER FOR PCI DEVICES
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 9da79070357c..084638e4ddf2 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -157,7 +157,6 @@ config AT91_SAMA5D2_ADC
 	tristate "Atmel AT91 SAMA5D2 ADC"
 	depends on ARCH_AT91 || COMPILE_TEST
 	depends on HAS_IOMEM
-	depends on HAS_DMA
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -647,7 +646,6 @@ config SD_ADC_MODULATOR
 config STM32_ADC_CORE
 	tristate "STMicroelectronics STM32 adc core"
 	depends on ARCH_STM32 || COMPILE_TEST
-	depends on HAS_DMA
 	depends on OF
 	depends on REGULATOR
 	select IIO_BUFFER
@@ -717,6 +715,7 @@ config SUN4I_GPADC
 	depends on IIO
 	depends on MFD_SUN4I_GPADC || MACH_SUN8I
 	depends on THERMAL || !THERMAL_OF
+	select REGMAP_IRQ
 	help
 	  Say yes here to build support for Allwinner (A10, A13 and A31) SoCs
 	  GPADC. This ADC provides 4 channels which can be used as an ADC or as
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 8729d6524b4d..e02f7d1c86bc 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -102,14 +102,26 @@
 #define AT91_SAMA5D2_LCDR	0x20
 /* Interrupt Enable Register */
 #define AT91_SAMA5D2_IER	0x24
+/* Interrupt Enable Register - TS X measurement ready */
+#define AT91_SAMA5D2_IER_XRDY   BIT(20)
+/* Interrupt Enable Register - TS Y measurement ready */
+#define AT91_SAMA5D2_IER_YRDY   BIT(21)
+/* Interrupt Enable Register - TS pressure measurement ready */
+#define AT91_SAMA5D2_IER_PRDY   BIT(22)
 /* Interrupt Enable Register - general overrun error */
 #define AT91_SAMA5D2_IER_GOVRE BIT(25)
+/* Interrupt Enable Register - Pen detect */
+#define AT91_SAMA5D2_IER_PEN    BIT(29)
+/* Interrupt Enable Register - No pen detect */
+#define AT91_SAMA5D2_IER_NOPEN  BIT(30)
 /* Interrupt Disable Register */
 #define AT91_SAMA5D2_IDR	0x28
 /* Interrupt Mask Register */
 #define AT91_SAMA5D2_IMR	0x2c
 /* Interrupt Status Register */
 #define AT91_SAMA5D2_ISR	0x30
+/* Interrupt Status Register - Pen touching sense status */
+#define AT91_SAMA5D2_ISR_PENS   BIT(31)
 /* Last Channel Trigger Mode Register */
 #define AT91_SAMA5D2_LCTMR	0x34
 /* Last Channel Compare Window Register */
@@ -118,6 +130,15 @@
 #define AT91_SAMA5D2_OVER	0x3c
 /* Extended Mode Register */
 #define AT91_SAMA5D2_EMR	0x40
+/* Extended Mode Register - Oversampling rate */
+#define AT91_SAMA5D2_EMR_OSR(V)			((V) << 16)
+#define AT91_SAMA5D2_EMR_OSR_MASK		GENMASK(17, 16)
+#define AT91_SAMA5D2_EMR_OSR_1SAMPLES		0
+#define AT91_SAMA5D2_EMR_OSR_4SAMPLES		1
+#define AT91_SAMA5D2_EMR_OSR_16SAMPLES		2
+
+/* Extended Mode Register - Averaging on single trigger event */
+#define AT91_SAMA5D2_EMR_ASTE(V)		((V) << 20)
 /* Compare Window Register */
 #define AT91_SAMA5D2_CWR	0x44
 /* Channel Gain Register */
@@ -131,8 +152,38 @@
 #define AT91_SAMA5D2_CDR0	0x50
 /* Analog Control Register */
 #define AT91_SAMA5D2_ACR	0x94
+/* Analog Control Register - Pen detect sensitivity mask */
+#define AT91_SAMA5D2_ACR_PENDETSENS_MASK        GENMASK(1, 0)
+
 /* Touchscreen Mode Register */
 #define AT91_SAMA5D2_TSMR	0xb0
+/* Touchscreen Mode Register - No touch mode */
+#define AT91_SAMA5D2_TSMR_TSMODE_NONE           0
+/* Touchscreen Mode Register - 4 wire screen, no pressure measurement */
+#define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_NO_PRESS 1
+/* Touchscreen Mode Register - 4 wire screen, pressure measurement */
+#define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS    2
+/* Touchscreen Mode Register - 5 wire screen */
+#define AT91_SAMA5D2_TSMR_TSMODE_5WIRE          3
+/* Touchscreen Mode Register - Average samples mask */
+#define AT91_SAMA5D2_TSMR_TSAV_MASK             GENMASK(5, 4)
+/* Touchscreen Mode Register - Average samples */
+#define AT91_SAMA5D2_TSMR_TSAV(x)               ((x) << 4)
+/* Touchscreen Mode Register - Touch/trigger frequency ratio mask */
+#define AT91_SAMA5D2_TSMR_TSFREQ_MASK           GENMASK(11, 8)
+/* Touchscreen Mode Register - Touch/trigger frequency ratio */
+#define AT91_SAMA5D2_TSMR_TSFREQ(x)             ((x) << 8)
+/* Touchscreen Mode Register - Pen Debounce Time mask */
+#define AT91_SAMA5D2_TSMR_PENDBC_MASK           GENMASK(31, 28)
+/* Touchscreen Mode Register - Pen Debounce Time */
+#define AT91_SAMA5D2_TSMR_PENDBC(x)            ((x) << 28)
+/* Touchscreen Mode Register - No DMA for touch measurements */
+#define AT91_SAMA5D2_TSMR_NOTSDMA               BIT(22)
+/* Touchscreen Mode Register - Disable pen detection */
+#define AT91_SAMA5D2_TSMR_PENDET_DIS            (0 << 24)
+/* Touchscreen Mode Register - Enable pen detection */
+#define AT91_SAMA5D2_TSMR_PENDET_ENA            BIT(24)
+
 /* Touchscreen X Position Register */
 #define AT91_SAMA5D2_XPOSR	0xb4
 /* Touchscreen Y Position Register */
@@ -151,6 +202,12 @@
 #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL 2
 /* Trigger Mode external trigger any edge */
 #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY 3
+/* Trigger Mode internal periodic */
+#define AT91_SAMA5D2_TRGR_TRGMOD_PERIODIC 5
+/* Trigger Mode - trigger period mask */
+#define AT91_SAMA5D2_TRGR_TRGPER_MASK           GENMASK(31, 16)
+/* Trigger Mode - trigger period */
+#define AT91_SAMA5D2_TRGR_TRGPER(x)             ((x) << 16)
 
 /* Correction Select Register */
 #define AT91_SAMA5D2_COSR	0xd0
@@ -169,6 +226,22 @@
 #define AT91_SAMA5D2_SINGLE_CHAN_CNT 12
 #define AT91_SAMA5D2_DIFF_CHAN_CNT 6
 
+#define AT91_SAMA5D2_TIMESTAMP_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \
+					 AT91_SAMA5D2_DIFF_CHAN_CNT + 1)
+
+#define AT91_SAMA5D2_TOUCH_X_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \
+					 AT91_SAMA5D2_DIFF_CHAN_CNT * 2)
+#define AT91_SAMA5D2_TOUCH_Y_CHAN_IDX   (AT91_SAMA5D2_TOUCH_X_CHAN_IDX + 1)
+#define AT91_SAMA5D2_TOUCH_P_CHAN_IDX   (AT91_SAMA5D2_TOUCH_Y_CHAN_IDX + 1)
+#define AT91_SAMA5D2_MAX_CHAN_IDX	AT91_SAMA5D2_TOUCH_P_CHAN_IDX
+
+#define AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US          2000    /* 2ms */
+#define AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US    200
+
+#define AT91_SAMA5D2_XYZ_MASK		GENMASK(11, 0)
+
+#define AT91_SAMA5D2_MAX_POS_BITS			12
+
 /*
  * Maximum number of bytes to hold conversion from all channels
  * without the timestamp.
@@ -184,6 +257,11 @@
 #define AT91_HWFIFO_MAX_SIZE_STR	"128"
 #define AT91_HWFIFO_MAX_SIZE		128
 
+/* Possible values for oversampling ratio */
+#define AT91_OSR_1SAMPLES		1
+#define AT91_OSR_4SAMPLES		4
+#define AT91_OSR_16SAMPLES		16
+
 #define AT91_SAMA5D2_CHAN_SINGLE(num, addr)				\
 	{								\
 		.type = IIO_VOLTAGE,					\
@@ -192,12 +270,13 @@
 		.scan_index = num,					\
 		.scan_type = {						\
 			.sign = 'u',					\
-			.realbits = 12,					\
+			.realbits = 14,					\
 			.storagebits = 16,				\
 		},							\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = "CH"#num,				\
 		.indexed = 1,						\
 	}
@@ -212,16 +291,50 @@
 		.scan_index = num + AT91_SAMA5D2_SINGLE_CHAN_CNT,	\
 		.scan_type = {						\
 			.sign = 's',					\
-			.realbits = 12,					\
+			.realbits = 14,					\
 			.storagebits = 16,				\
 		},							\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
-		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
 		.datasheet_name = "CH"#num"-CH"#num2,			\
 		.indexed = 1,						\
 	}
 
+#define AT91_SAMA5D2_CHAN_TOUCH(num, name, mod)				\
+	{								\
+		.type = IIO_POSITIONRELATIVE,				\
+		.modified = 1,						\
+		.channel = num,						\
+		.channel2 = mod,					\
+		.scan_index = num,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = 12,					\
+			.storagebits = 16,				\
+		},							\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.datasheet_name = name,					\
+	}
+#define AT91_SAMA5D2_CHAN_PRESSURE(num, name)				\
+	{								\
+		.type = IIO_PRESSURE,					\
+		.channel = num,						\
+		.scan_index = num,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = 12,					\
+			.storagebits = 16,				\
+		},							\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
+		.datasheet_name = name,					\
+	}
+
 #define at91_adc_readl(st, reg)		readl_relaxed(st->base + reg)
 #define at91_adc_writel(st, reg, val)	writel_relaxed(val, st->base + reg)
 
@@ -260,6 +373,22 @@ struct at91_adc_dma {
 	s64				dma_ts;
 };
 
+/**
+ * at91_adc_touch - at91-sama5d2 touchscreen information struct
+ * @sample_period_val:		the value for periodic trigger interval
+ * @touching:			is the pen touching the screen or not
+ * @x_pos:			temporary placeholder for pressure computation
+ * @channels_bitmask:		bitmask with the touchscreen channels enabled
+ * @workq:			workqueue for buffer data pushing
+ */
+struct at91_adc_touch {
+	u16				sample_period_val;
+	bool				touching;
+	u16				x_pos;
+	unsigned long			channels_bitmask;
+	struct work_struct		workq;
+};
+
 struct at91_adc_state {
 	void __iomem			*base;
 	int				irq;
@@ -267,14 +396,17 @@ struct at91_adc_state {
 	struct regulator		*reg;
 	struct regulator		*vref;
 	int				vref_uv;
+	unsigned int			current_sample_rate;
 	struct iio_trigger		*trig;
 	const struct at91_adc_trigger	*selected_trig;
 	const struct iio_chan_spec	*chan;
 	bool				conversion_done;
 	u32				conversion_value;
+	unsigned int			oversampling_ratio;
 	struct at91_adc_soc_info	soc_info;
 	wait_queue_head_t		wq_data_available;
 	struct at91_adc_dma		dma_st;
+	struct at91_adc_touch		touch_st;
 	u16				buffer[AT91_BUFFER_MAX_HWORDS];
 	/*
 	 * lock to prevent concurrent 'single conversion' requests through
@@ -329,8 +461,10 @@ static const struct iio_chan_spec at91_adc_channels[] = {
 	AT91_SAMA5D2_CHAN_DIFF(6, 7, 0x68),
 	AT91_SAMA5D2_CHAN_DIFF(8, 9, 0x70),
 	AT91_SAMA5D2_CHAN_DIFF(10, 11, 0x78),
-	IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_SINGLE_CHAN_CNT
-				+ AT91_SAMA5D2_DIFF_CHAN_CNT + 1),
+	IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_TIMESTAMP_CHAN_IDX),
+	AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_X_CHAN_IDX, "x", IIO_MOD_X),
+	AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_Y_CHAN_IDX, "y", IIO_MOD_Y),
+	AT91_SAMA5D2_CHAN_PRESSURE(AT91_SAMA5D2_TOUCH_P_CHAN_IDX, "pressure"),
 };
 
 static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
@@ -354,6 +488,231 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan)
 	return indio_dev->channels + index;
 }
 
+static inline int at91_adc_of_xlate(struct iio_dev *indio_dev,
+				    const struct of_phandle_args *iiospec)
+{
+	return at91_adc_chan_xlate(indio_dev, iiospec->args[0]);
+}
+
+static void at91_adc_config_emr(struct at91_adc_state *st)
+{
+	/* configure the extended mode register */
+	unsigned int emr = at91_adc_readl(st, AT91_SAMA5D2_EMR);
+
+	/* select oversampling per single trigger event */
+	emr |= AT91_SAMA5D2_EMR_ASTE(1);
+
+	/* delete leftover content if it's the case */
+	emr &= ~AT91_SAMA5D2_EMR_OSR_MASK;
+
+	/* select oversampling ratio from configuration */
+	switch (st->oversampling_ratio) {
+	case AT91_OSR_1SAMPLES:
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) &
+		       AT91_SAMA5D2_EMR_OSR_MASK;
+		break;
+	case AT91_OSR_4SAMPLES:
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) &
+		       AT91_SAMA5D2_EMR_OSR_MASK;
+		break;
+	case AT91_OSR_16SAMPLES:
+		emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) &
+		       AT91_SAMA5D2_EMR_OSR_MASK;
+		break;
+	}
+
+	at91_adc_writel(st, AT91_SAMA5D2_EMR, emr);
+}
+
+static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val)
+{
+	if (st->oversampling_ratio == AT91_OSR_1SAMPLES) {
+		/*
+		 * in this case we only have 12 bits of real data, but channel
+		 * is registered as 14 bits, so shift left two bits
+		 */
+		*val <<= 2;
+	} else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) {
+		/*
+		 * in this case we have 13 bits of real data, but channel
+		 * is registered as 14 bits, so left shift one bit
+		 */
+		*val <<= 1;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf,
+					  int len)
+{
+	int i = 0, val;
+	u16 *buf_u16 = (u16 *) buf;
+
+	/*
+	 * We are converting each two bytes (each sample).
+	 * First convert the byte based array to u16, and convert each sample
+	 * separately.
+	 * Each value is two bytes in an array of chars, so to not shift
+	 * more than we need, save the value separately.
+	 * len is in bytes, so divide by two to get number of samples.
+	 */
+	while (i < len / 2) {
+		val = buf_u16[i];
+		at91_adc_adjust_val_osr(st, &val);
+		buf_u16[i] = val;
+		i++;
+	}
+}
+
+static int at91_adc_configure_touch(struct at91_adc_state *st, bool state)
+{
+	u32 clk_khz = st->current_sample_rate / 1000;
+	int i = 0;
+	u16 pendbc;
+	u32 tsmr, acr;
+
+	if (!state) {
+		/* disabling touch IRQs and setting mode to no touch enabled */
+		at91_adc_writel(st, AT91_SAMA5D2_IDR,
+				AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN);
+		at91_adc_writel(st, AT91_SAMA5D2_TSMR, 0);
+		return 0;
+	}
+	/*
+	 * debounce time is in microseconds, we need it in milliseconds to
+	 * multiply with kilohertz, so, divide by 1000, but after the multiply.
+	 * round up to make sure pendbc is at least 1
+	 */
+	pendbc = round_up(AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US *
+			  clk_khz / 1000, 1);
+
+	/* get the required exponent */
+	while (pendbc >> i++)
+		;
+
+	pendbc = i;
+
+	tsmr = AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS;
+
+	tsmr |= AT91_SAMA5D2_TSMR_TSAV(2) & AT91_SAMA5D2_TSMR_TSAV_MASK;
+	tsmr |= AT91_SAMA5D2_TSMR_PENDBC(pendbc) &
+		AT91_SAMA5D2_TSMR_PENDBC_MASK;
+	tsmr |= AT91_SAMA5D2_TSMR_NOTSDMA;
+	tsmr |= AT91_SAMA5D2_TSMR_PENDET_ENA;
+	tsmr |= AT91_SAMA5D2_TSMR_TSFREQ(2) & AT91_SAMA5D2_TSMR_TSFREQ_MASK;
+
+	at91_adc_writel(st, AT91_SAMA5D2_TSMR, tsmr);
+
+	acr =  at91_adc_readl(st, AT91_SAMA5D2_ACR);
+	acr &= ~AT91_SAMA5D2_ACR_PENDETSENS_MASK;
+	acr |= 0x02 & AT91_SAMA5D2_ACR_PENDETSENS_MASK;
+	at91_adc_writel(st, AT91_SAMA5D2_ACR, acr);
+
+	/* Sample Period Time = (TRGPER + 1) / ADCClock */
+	st->touch_st.sample_period_val =
+				 round_up((AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US *
+				 clk_khz / 1000) - 1, 1);
+	/* enable pen detect IRQ */
+	at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_PEN);
+
+	return 0;
+}
+
+static u16 at91_adc_touch_pos(struct at91_adc_state *st, int reg)
+{
+	u32 val;
+	u32 scale, result, pos;
+
+	/*
+	 * to obtain the actual position we must divide by scale
+	 * and multiply with max, where
+	 * max = 2^AT91_SAMA5D2_MAX_POS_BITS - 1
+	 */
+	/* first half of register is the x or y, second half is the scale */
+	val = at91_adc_readl(st, reg);
+	if (!val)
+		dev_dbg(&iio_priv_to_dev(st)->dev, "pos is 0\n");
+
+	pos = val & AT91_SAMA5D2_XYZ_MASK;
+	result = (pos << AT91_SAMA5D2_MAX_POS_BITS) - pos;
+	scale = (val >> 16) & AT91_SAMA5D2_XYZ_MASK;
+	if (scale == 0) {
+		dev_err(&iio_priv_to_dev(st)->dev, "scale is 0\n");
+		return 0;
+	}
+	result /= scale;
+
+	return result;
+}
+
+static u16 at91_adc_touch_x_pos(struct at91_adc_state *st)
+{
+	st->touch_st.x_pos = at91_adc_touch_pos(st, AT91_SAMA5D2_XPOSR);
+	return st->touch_st.x_pos;
+}
+
+static u16 at91_adc_touch_y_pos(struct at91_adc_state *st)
+{
+	return at91_adc_touch_pos(st, AT91_SAMA5D2_YPOSR);
+}
+
+static u16 at91_adc_touch_pressure(struct at91_adc_state *st)
+{
+	u32 val;
+	u32 z1, z2;
+	u32 pres;
+	u32 rxp = 1;
+	u32 factor = 1000;
+
+	/* calculate the pressure */
+	val = at91_adc_readl(st, AT91_SAMA5D2_PRESSR);
+	z1 = val & AT91_SAMA5D2_XYZ_MASK;
+	z2 = (val >> 16) & AT91_SAMA5D2_XYZ_MASK;
+
+	if (z1 != 0)
+		pres = rxp * (st->touch_st.x_pos * factor / 1024) *
+			(z2 * factor / z1 - factor) /
+			factor;
+	else
+		pres = 0xFFFF;       /* no pen contact */
+
+	/*
+	 * The pressure from device grows down, minimum is 0xFFFF, maximum 0x0.
+	 * We compute it this way, but let's return it in the expected way,
+	 * growing from 0 to 0xFFFF.
+	 */
+	return 0xFFFF - pres;
+}
+
+static int at91_adc_read_position(struct at91_adc_state *st, int chan, u16 *val)
+{
+	*val = 0;
+	if (!st->touch_st.touching)
+		return -ENODATA;
+	if (chan == AT91_SAMA5D2_TOUCH_X_CHAN_IDX)
+		*val = at91_adc_touch_x_pos(st);
+	else if (chan == AT91_SAMA5D2_TOUCH_Y_CHAN_IDX)
+		*val = at91_adc_touch_y_pos(st);
+	else
+		return -ENODATA;
+
+	return IIO_VAL_INT;
+}
+
+static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val)
+{
+	*val = 0;
+	if (!st->touch_st.touching)
+		return -ENODATA;
+	if (chan == AT91_SAMA5D2_TOUCH_P_CHAN_IDX)
+		*val = at91_adc_touch_pressure(st);
+	else
+		return -ENODATA;
+
+	return IIO_VAL_INT;
+}
+
 static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 {
 	struct iio_dev *indio = iio_trigger_get_drvdata(trig);
@@ -375,6 +734,11 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 
 		if (!chan)
 			continue;
+		/* these channel types cannot be handled by this trigger */
+		if (chan->type == IIO_POSITIONRELATIVE ||
+		    chan->type == IIO_PRESSURE)
+			continue;
+
 		if (state) {
 			at91_adc_writel(st, AT91_SAMA5D2_CHER,
 					BIT(chan->channel));
@@ -520,7 +884,20 @@ static int at91_adc_dma_start(struct iio_dev *indio_dev)
 static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int ret;
+	struct at91_adc_state *st = iio_priv(indio_dev);
 
+	/* check if we are enabling triggered buffer or the touchscreen */
+	if (bitmap_subset(indio_dev->active_scan_mask,
+			  &st->touch_st.channels_bitmask,
+			  AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
+		/* touchscreen enabling */
+		return at91_adc_configure_touch(st, true);
+	}
+	/* if we are not in triggered mode, we cannot enable the buffer. */
+	if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
+		return -EINVAL;
+
+	/* we continue with the triggered buffer */
 	ret = at91_adc_dma_start(indio_dev);
 	if (ret) {
 		dev_err(&indio_dev->dev, "buffer postenable failed\n");
@@ -536,6 +913,18 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
 	int ret;
 	u8 bit;
 
+	/* check if we are disabling triggered buffer or the touchscreen */
+	if (bitmap_subset(indio_dev->active_scan_mask,
+			  &st->touch_st.channels_bitmask,
+			  AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
+		/* touchscreen disable */
+		return at91_adc_configure_touch(st, false);
+	}
+	/* if we are not in triggered mode, nothing to do here */
+	if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES))
+		return -EINVAL;
+
+	/* continue with the triggered buffer */
 	ret = iio_triggered_buffer_predisable(indio_dev);
 	if (ret < 0)
 		dev_err(&indio_dev->dev, "buffer predisable failed\n");
@@ -558,6 +947,10 @@ static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
 
 		if (!chan)
 			continue;
+		/* these channel types are virtual, no need to do anything */
+		if (chan->type == IIO_POSITIONRELATIVE ||
+		    chan->type == IIO_PRESSURE)
+			continue;
 		if (st->dma_st.dma_chan)
 			at91_adc_readl(st, chan->address);
 	}
@@ -613,6 +1006,7 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	int i = 0;
+	int val;
 	u8 bit;
 
 	for_each_set_bit(bit, indio_dev->active_scan_mask,
@@ -622,7 +1016,24 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
 
 		if (!chan)
 			continue;
-		st->buffer[i] = at91_adc_readl(st, chan->address);
+		/*
+		 * Our external trigger only supports the voltage channels.
+		 * In case someone requested a different type of channel
+		 * just put zeroes to buffer.
+		 * This should not happen because we check the scan mode
+		 * and scan mask when we enable the buffer, and we don't allow
+		 * the buffer to start with a mixed mask (voltage and something
+		 * else).
+		 * Thus, emit a warning.
+		 */
+		if (chan->type == IIO_VOLTAGE) {
+			val = at91_adc_readl(st, chan->address);
+			at91_adc_adjust_val_osr(st, &val);
+			st->buffer[i] = val;
+		} else {
+			st->buffer[i] = 0;
+			WARN(true, "This trigger cannot handle this type of channel");
+		}
 		i++;
 	}
 	iio_push_to_buffers_with_timestamp(indio_dev, st->buffer,
@@ -654,6 +1065,14 @@ static void at91_adc_trigger_handler_dma(struct iio_dev *indio_dev)
 	interval = div_s64((ns - st->dma_st.dma_ts), sample_count);
 
 	while (transferred_len >= sample_size) {
+		/*
+		 * for all the values in the current sample,
+		 * adjust the values inside the buffer for oversampling
+		 */
+		at91_adc_adjust_val_osr_array(st,
+					&st->dma_st.rx_buf[st->dma_st.buf_idx],
+					sample_size);
+
 		iio_push_to_buffers_with_timestamp(indio_dev,
 				(st->dma_st.rx_buf + st->dma_st.buf_idx),
 				(st->dma_st.dma_ts + interval * sample_index));
@@ -688,9 +1107,20 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
 
 static int at91_adc_buffer_init(struct iio_dev *indio)
 {
-	return devm_iio_triggered_buffer_setup(&indio->dev, indio,
+	struct at91_adc_state *st = iio_priv(indio);
+
+	if (st->selected_trig->hw_trig) {
+		return devm_iio_triggered_buffer_setup(&indio->dev, indio,
 			&iio_pollfunc_store_time,
 			&at91_adc_trigger_handler, &at91_buffer_setup_ops);
+	}
+	/*
+	 * we need to prepare the buffer ops in case we will get
+	 * another buffer attached (like a callback buffer for the touchscreen)
+	 */
+	indio->setup_ops = &at91_buffer_setup_ops;
+
+	return 0;
 }
 
 static unsigned at91_adc_startup_time(unsigned startup_time_min,
@@ -736,19 +1166,83 @@ static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
 
 	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
 		freq, startup, prescal);
+	st->current_sample_rate = freq;
 }
 
-static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st)
+static inline unsigned at91_adc_get_sample_freq(struct at91_adc_state *st)
 {
-	unsigned f_adc, f_per = clk_get_rate(st->per_clk);
-	unsigned mr, prescal;
+	return st->current_sample_rate;
+}
 
-	mr = at91_adc_readl(st, AT91_SAMA5D2_MR);
-	prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET)
-		  & AT91_SAMA5D2_MR_PRESCAL_MAX;
-	f_adc = f_per / (2 * (prescal + 1));
+static void at91_adc_touch_data_handler(struct iio_dev *indio_dev)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+	u8 bit;
+	u16 val;
+	int i = 0;
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 AT91_SAMA5D2_MAX_CHAN_IDX + 1) {
+		struct iio_chan_spec const *chan =
+					 at91_adc_chan_get(indio_dev, bit);
+
+		if (chan->type == IIO_POSITIONRELATIVE)
+			at91_adc_read_position(st, chan->channel, &val);
+		else if (chan->type == IIO_PRESSURE)
+			at91_adc_read_pressure(st, chan->channel, &val);
+		else
+			continue;
+		st->buffer[i] = val;
+		i++;
+	}
+	/*
+	 * Schedule work to push to buffers.
+	 * This is intended to push to the callback buffer that another driver
+	 * registered. We are still in a handler from our IRQ. If we push
+	 * directly, it means the other driver has it's callback called
+	 * from our IRQ context. Which is something we better avoid.
+	 * Let's schedule it after our IRQ is completed.
+	 */
+	schedule_work(&st->touch_st.workq);
+}
+
+static void at91_adc_pen_detect_interrupt(struct at91_adc_state *st)
+{
+	at91_adc_writel(st, AT91_SAMA5D2_IDR, AT91_SAMA5D2_IER_PEN);
+	at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_NOPEN |
+			AT91_SAMA5D2_IER_XRDY | AT91_SAMA5D2_IER_YRDY |
+			AT91_SAMA5D2_IER_PRDY);
+	at91_adc_writel(st, AT91_SAMA5D2_TRGR,
+			AT91_SAMA5D2_TRGR_TRGMOD_PERIODIC |
+			AT91_SAMA5D2_TRGR_TRGPER(st->touch_st.sample_period_val));
+	st->touch_st.touching = true;
+}
+
+static void at91_adc_no_pen_detect_interrupt(struct at91_adc_state *st)
+{
+	struct iio_dev *indio_dev = iio_priv_to_dev(st);
+
+	at91_adc_writel(st, AT91_SAMA5D2_TRGR,
+			AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER);
+	at91_adc_writel(st, AT91_SAMA5D2_IDR, AT91_SAMA5D2_IER_NOPEN |
+			AT91_SAMA5D2_IER_XRDY | AT91_SAMA5D2_IER_YRDY |
+			AT91_SAMA5D2_IER_PRDY);
+	st->touch_st.touching = false;
+
+	at91_adc_touch_data_handler(indio_dev);
+
+	at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_PEN);
+}
+
+static void at91_adc_workq_handler(struct work_struct *workq)
+{
+	struct at91_adc_touch *touch_st = container_of(workq,
+					struct at91_adc_touch, workq);
+	struct at91_adc_state *st = container_of(touch_st,
+					struct at91_adc_state, touch_st);
+	struct iio_dev *indio_dev = iio_priv_to_dev(st);
 
-	return f_adc;
+	iio_push_to_buffers(indio_dev, st->buffer);
 }
 
 static irqreturn_t at91_adc_interrupt(int irq, void *private)
@@ -757,17 +1251,39 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private)
 	struct at91_adc_state *st = iio_priv(indio);
 	u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR);
 	u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR);
+	u32 rdy_mask = AT91_SAMA5D2_IER_XRDY | AT91_SAMA5D2_IER_YRDY |
+			AT91_SAMA5D2_IER_PRDY;
 
 	if (!(status & imr))
 		return IRQ_NONE;
-
-	if (iio_buffer_enabled(indio) && !st->dma_st.dma_chan) {
+	if (status & AT91_SAMA5D2_IER_PEN) {
+		/* pen detected IRQ */
+		at91_adc_pen_detect_interrupt(st);
+	} else if ((status & AT91_SAMA5D2_IER_NOPEN)) {
+		/* nopen detected IRQ */
+		at91_adc_no_pen_detect_interrupt(st);
+	} else if ((status & AT91_SAMA5D2_ISR_PENS) &&
+		   ((status & rdy_mask) == rdy_mask)) {
+		/* periodic trigger IRQ - during pen sense */
+		at91_adc_touch_data_handler(indio);
+	} else if (status & AT91_SAMA5D2_ISR_PENS) {
+		/*
+		 * touching, but the measurements are not ready yet.
+		 * read and ignore.
+		 */
+		status = at91_adc_readl(st, AT91_SAMA5D2_XPOSR);
+		status = at91_adc_readl(st, AT91_SAMA5D2_YPOSR);
+		status = at91_adc_readl(st, AT91_SAMA5D2_PRESSR);
+	} else if (iio_buffer_enabled(indio) && !st->dma_st.dma_chan) {
+		/* triggered buffer without DMA */
 		disable_irq_nosync(irq);
 		iio_trigger_poll(indio->trig);
 	} else if (iio_buffer_enabled(indio) && st->dma_st.dma_chan) {
+		/* triggered buffer with DMA - should not happen */
 		disable_irq_nosync(irq);
 		WARN(true, "Unexpected irq occurred\n");
 	} else if (!iio_buffer_enabled(indio)) {
+		/* software requested conversion */
 		st->conversion_value = at91_adc_readl(st, st->chan->address);
 		st->conversion_done = true;
 		wake_up_interruptible(&st->wq_data_available);
@@ -775,58 +1291,97 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
-static int at91_adc_read_raw(struct iio_dev *indio_dev,
-			     struct iio_chan_spec const *chan,
-			     int *val, int *val2, long mask)
+static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan, int *val)
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 	u32 cor = 0;
 	int ret;
 
-	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
-		/* we cannot use software trigger if hw trigger enabled */
+	/*
+	 * Keep in mind that we cannot use software trigger or touchscreen
+	 * if external trigger is enabled
+	 */
+	if (chan->type == IIO_POSITIONRELATIVE) {
 		ret = iio_device_claim_direct_mode(indio_dev);
 		if (ret)
 			return ret;
 		mutex_lock(&st->lock);
 
-		st->chan = chan;
+		ret = at91_adc_read_position(st, chan->channel,
+					     (u16 *)val);
+		mutex_unlock(&st->lock);
+		iio_device_release_direct_mode(indio_dev);
 
-		if (chan->differential)
-			cor = (BIT(chan->channel) | BIT(chan->channel2)) <<
-			      AT91_SAMA5D2_COR_DIFF_OFFSET;
-
-		at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
-		at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel));
-		at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel));
-		at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START);
-
-		ret = wait_event_interruptible_timeout(st->wq_data_available,
-						       st->conversion_done,
-						       msecs_to_jiffies(1000));
-		if (ret == 0)
-			ret = -ETIMEDOUT;
-
-		if (ret > 0) {
-			*val = st->conversion_value;
-			if (chan->scan_type.sign == 's')
-				*val = sign_extend32(*val, 11);
-			ret = IIO_VAL_INT;
-			st->conversion_done = false;
-		}
+		return at91_adc_adjust_val_osr(st, val);
+	}
+	if (chan->type == IIO_PRESSURE) {
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		mutex_lock(&st->lock);
 
-		at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel));
-		at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel));
+		ret = at91_adc_read_pressure(st, chan->channel,
+					     (u16 *)val);
+		mutex_unlock(&st->lock);
+		iio_device_release_direct_mode(indio_dev);
 
-		/* Needed to ACK the DRDY interruption */
-		at91_adc_readl(st, AT91_SAMA5D2_LCDR);
+		return at91_adc_adjust_val_osr(st, val);
+	}
 
-		mutex_unlock(&st->lock);
+	/* in this case we have a voltage channel */
 
-		iio_device_release_direct_mode(indio_dev);
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
 		return ret;
+	mutex_lock(&st->lock);
+
+	st->chan = chan;
+
+	if (chan->differential)
+		cor = (BIT(chan->channel) | BIT(chan->channel2)) <<
+		      AT91_SAMA5D2_COR_DIFF_OFFSET;
+
+	at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
+	at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel));
+	at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel));
+	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START);
+
+	ret = wait_event_interruptible_timeout(st->wq_data_available,
+					       st->conversion_done,
+					       msecs_to_jiffies(1000));
+	if (ret == 0)
+		ret = -ETIMEDOUT;
+
+	if (ret > 0) {
+		*val = st->conversion_value;
+		ret = at91_adc_adjust_val_osr(st, val);
+		if (chan->scan_type.sign == 's')
+			*val = sign_extend32(*val, 11);
+		st->conversion_done = false;
+	}
 
+	at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel));
+	at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel));
+
+	/* Needed to ACK the DRDY interruption */
+	at91_adc_readl(st, AT91_SAMA5D2_LCDR);
+
+	mutex_unlock(&st->lock);
+
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
+static int at91_adc_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return at91_adc_read_info_raw(indio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_uv / 1000;
 		if (chan->differential)
@@ -838,6 +1393,10 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 		*val = at91_adc_get_sample_freq(st);
 		return IIO_VAL_INT;
 
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = st->oversampling_ratio;
+		return IIO_VAL_INT;
+
 	default:
 		return -EINVAL;
 	}
@@ -849,16 +1408,28 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
 
-	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
-		return -EINVAL;
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if ((val != AT91_OSR_1SAMPLES) && (val != AT91_OSR_4SAMPLES) &&
+		    (val != AT91_OSR_16SAMPLES))
+			return -EINVAL;
+		/* if no change, optimize out */
+		if (val == st->oversampling_ratio)
+			return 0;
+		st->oversampling_ratio = val;
+		/* update ratio */
+		at91_adc_config_emr(st);
+		return 0;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val < st->soc_info.min_sample_rate ||
+		    val > st->soc_info.max_sample_rate)
+			return -EINVAL;
 
-	if (val < st->soc_info.min_sample_rate ||
-	    val > st->soc_info.max_sample_rate)
+		at91_adc_setup_samp_freq(st, val);
+		return 0;
+	default:
 		return -EINVAL;
-
-	at91_adc_setup_samp_freq(st, val);
-
-	return 0;
+	};
 }
 
 static void at91_adc_dma_init(struct platform_device *pdev)
@@ -974,11 +1545,23 @@ static int at91_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val)
 	return 0;
 }
 
-static const struct iio_info at91_adc_info = {
-	.read_raw = &at91_adc_read_raw,
-	.write_raw = &at91_adc_write_raw,
-	.hwfifo_set_watermark = &at91_adc_set_watermark,
-};
+static int at91_adc_update_scan_mode(struct iio_dev *indio_dev,
+				     const unsigned long *scan_mask)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	if (bitmap_subset(scan_mask, &st->touch_st.channels_bitmask,
+			  AT91_SAMA5D2_MAX_CHAN_IDX + 1))
+		return 0;
+	/*
+	 * if the new bitmap is a combination of touchscreen and regular
+	 * channels, then we are not fine
+	 */
+	if (bitmap_intersects(&st->touch_st.channels_bitmask, scan_mask,
+			      AT91_SAMA5D2_MAX_CHAN_IDX + 1))
+		return -EINVAL;
+	return 0;
+}
 
 static void at91_adc_hw_init(struct at91_adc_state *st)
 {
@@ -992,6 +1575,9 @@ static void at91_adc_hw_init(struct at91_adc_state *st)
 			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
 
 	at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
+
+	/* configure extended mode register */
+	at91_adc_config_emr(st);
 }
 
 static ssize_t at91_adc_get_fifo_state(struct device *dev,
@@ -1022,6 +1608,20 @@ static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
 static IIO_CONST_ATTR(hwfifo_watermark_min, "2");
 static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR);
 
+static IIO_CONST_ATTR(oversampling_ratio_available,
+		      __stringify(AT91_OSR_1SAMPLES) " "
+		      __stringify(AT91_OSR_4SAMPLES) " "
+		      __stringify(AT91_OSR_16SAMPLES));
+
+static struct attribute *at91_adc_attributes[] = {
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group at91_adc_attribute_group = {
+	.attrs = at91_adc_attributes,
+};
+
 static const struct attribute *at91_adc_fifo_attributes[] = {
 	&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
 	&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
@@ -1030,6 +1630,15 @@ static const struct attribute *at91_adc_fifo_attributes[] = {
 	NULL,
 };
 
+static const struct iio_info at91_adc_info = {
+	.attrs = &at91_adc_attribute_group,
+	.read_raw = &at91_adc_read_raw,
+	.write_raw = &at91_adc_write_raw,
+	.update_scan_mode = &at91_adc_update_scan_mode,
+	.of_xlate = &at91_adc_of_xlate,
+	.hwfifo_set_watermark = &at91_adc_set_watermark,
+};
+
 static int at91_adc_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
@@ -1044,13 +1653,22 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	indio_dev->dev.parent = &pdev->dev;
 	indio_dev->name = dev_name(&pdev->dev);
-	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
 	indio_dev->info = &at91_adc_info;
 	indio_dev->channels = at91_adc_channels;
 	indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels);
 
 	st = iio_priv(indio_dev);
 
+	bitmap_set(&st->touch_st.channels_bitmask,
+		   AT91_SAMA5D2_TOUCH_X_CHAN_IDX, 1);
+	bitmap_set(&st->touch_st.channels_bitmask,
+		   AT91_SAMA5D2_TOUCH_Y_CHAN_IDX, 1);
+	bitmap_set(&st->touch_st.channels_bitmask,
+		   AT91_SAMA5D2_TOUCH_P_CHAN_IDX, 1);
+
+	st->oversampling_ratio = AT91_OSR_1SAMPLES;
+
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "atmel,min-sample-rate-hz",
 				   &st->soc_info.min_sample_rate);
@@ -1100,6 +1718,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	init_waitqueue_head(&st->wq_data_available);
 	mutex_init(&st->lock);
+	INIT_WORK(&st->touch_st.workq, at91_adc_workq_handler);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -1159,13 +1778,13 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, indio_dev);
 
-	if (st->selected_trig->hw_trig) {
-		ret = at91_adc_buffer_init(indio_dev);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
-			goto per_clk_disable_unprepare;
-		}
+	ret = at91_adc_buffer_init(indio_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
+		goto per_clk_disable_unprepare;
+	}
 
+	if (st->selected_trig->hw_trig) {
 		ret = at91_adc_trigger_init(indio_dev);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "couldn't setup the triggers.\n");
@@ -1272,9 +1891,20 @@ static __maybe_unused int at91_adc_resume(struct device *dev)
 	at91_adc_hw_init(st);
 
 	/* reconfiguring trigger hardware state */
-	if (iio_buffer_enabled(indio_dev))
-		at91_adc_configure_trigger(st->trig, true);
+	if (!iio_buffer_enabled(indio_dev))
+		return 0;
+
+	/* check if we are enabling triggered buffer or the touchscreen */
+	if (bitmap_subset(indio_dev->active_scan_mask,
+			  &st->touch_st.channels_bitmask,
+			  AT91_SAMA5D2_MAX_CHAN_IDX + 1)) {
+		/* touchscreen enabling */
+		return at91_adc_configure_touch(st, true);
+	} else {
+		return at91_adc_configure_trigger(st->trig, true);
+	}
 
+	/* not needed but more explicit */
 	return 0;
 
 vref_disable_resume:
diff --git a/drivers/iio/counter/104-quad-8.c b/drivers/iio/counter/104-quad-8.c
index b56985078d8c..92be8d0f7735 100644
--- a/drivers/iio/counter/104-quad-8.c
+++ b/drivers/iio/counter/104-quad-8.c
@@ -59,6 +59,39 @@ struct quad8_iio {
 	unsigned int base;
 };
 
+#define QUAD8_REG_CHAN_OP 0x11
+#define QUAD8_REG_INDEX_INPUT_LEVELS 0x16
+/* Borrow Toggle flip-flop */
+#define QUAD8_FLAG_BT BIT(0)
+/* Carry Toggle flip-flop */
+#define QUAD8_FLAG_CT BIT(1)
+/* Error flag */
+#define QUAD8_FLAG_E BIT(4)
+/* Up/Down flag */
+#define QUAD8_FLAG_UD BIT(5)
+/* Reset and Load Signal Decoders */
+#define QUAD8_CTR_RLD 0x00
+/* Counter Mode Register */
+#define QUAD8_CTR_CMR 0x20
+/* Input / Output Control Register */
+#define QUAD8_CTR_IOR 0x40
+/* Index Control Register */
+#define QUAD8_CTR_IDR 0x60
+/* Reset Byte Pointer (three byte data pointer) */
+#define QUAD8_RLD_RESET_BP 0x01
+/* Reset Counter */
+#define QUAD8_RLD_RESET_CNTR 0x02
+/* Reset Borrow Toggle, Carry Toggle, Compare Toggle, and Sign flags */
+#define QUAD8_RLD_RESET_FLAGS 0x04
+/* Reset Error flag */
+#define QUAD8_RLD_RESET_E 0x06
+/* Preset Register to Counter */
+#define QUAD8_RLD_PRESET_CNTR 0x08
+/* Transfer Counter to Output Latch */
+#define QUAD8_RLD_CNTR_OUT 0x10
+#define QUAD8_CHAN_OP_ENABLE_COUNTERS 0x00
+#define QUAD8_CHAN_OP_RESET_COUNTERS 0x01
+
 static int quad8_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
@@ -72,19 +105,21 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		if (chan->type == IIO_INDEX) {
-			*val = !!(inb(priv->base + 0x16) & BIT(chan->channel));
+			*val = !!(inb(priv->base + QUAD8_REG_INDEX_INPUT_LEVELS)
+				& BIT(chan->channel));
 			return IIO_VAL_INT;
 		}
 
 		flags = inb(base_offset + 1);
-		borrow = flags & BIT(0);
-		carry = !!(flags & BIT(1));
+		borrow = flags & QUAD8_FLAG_BT;
+		carry = !!(flags & QUAD8_FLAG_CT);
 
 		/* Borrow XOR Carry effectively doubles count range */
 		*val = (borrow ^ carry) << 24;
 
 		/* Reset Byte Pointer; transfer Counter to Output Latch */
-		outb(0x11, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
+		     base_offset + 1);
 
 		for (i = 0; i < 3; i++)
 			*val |= (unsigned int)inb(base_offset) << (8 * i);
@@ -120,17 +155,17 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 			return -EINVAL;
 
 		/* Reset Byte Pointer */
-		outb(0x01, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
 		/* Counter can only be set via Preset Register */
 		for (i = 0; i < 3; i++)
 			outb(val >> (8 * i), base_offset);
 
 		/* Transfer Preset Register to Counter */
-		outb(0x08, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_PRESET_CNTR, base_offset + 1);
 
 		/* Reset Byte Pointer */
-		outb(0x01, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
 		/* Set Preset Register back to original value */
 		val = priv->preset[chan->channel];
@@ -138,9 +173,9 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 			outb(val >> (8 * i), base_offset);
 
 		/* Reset Borrow, Carry, Compare, and Sign flags */
-		outb(0x02, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
 		/* Reset Error flag */
-		outb(0x06, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
 		return 0;
 	case IIO_CHAN_INFO_ENABLE:
@@ -153,7 +188,7 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 		ior_cfg = val | priv->preset_enable[chan->channel] << 1;
 
 		/* Load I/O control configuration */
-		outb(0x40 | ior_cfg, base_offset + 1);
+		outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
 		return 0;
 	case IIO_CHAN_INFO_SCALE:
@@ -217,7 +252,7 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
 	priv->preset[chan->channel] = preset;
 
 	/* Reset Byte Pointer */
-	outb(0x01, base_offset + 1);
+	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
 	/* Set Preset Register */
 	for (i = 0; i < 3; i++)
@@ -258,7 +293,7 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
 		(unsigned int)preset_enable << 1;
 
 	/* Load I/O control configuration to Input / Output Control Register */
-	outb(0x40 | ior_cfg, base_offset);
+	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
 	return len;
 }
@@ -274,7 +309,7 @@ static int quad8_get_noise_error(struct iio_dev *indio_dev,
 	struct quad8_iio *const priv = iio_priv(indio_dev);
 	const int base_offset = priv->base + 2 * chan->channel + 1;
 
-	return !!(inb(base_offset) & BIT(4));
+	return !!(inb(base_offset) & QUAD8_FLAG_E);
 }
 
 static const struct iio_enum quad8_noise_error_enum = {
@@ -294,7 +329,7 @@ static int quad8_get_count_direction(struct iio_dev *indio_dev,
 	struct quad8_iio *const priv = iio_priv(indio_dev);
 	const int base_offset = priv->base + 2 * chan->channel + 1;
 
-	return !!(inb(base_offset) & BIT(5));
+	return !!(inb(base_offset) & QUAD8_FLAG_UD);
 }
 
 static const struct iio_enum quad8_count_direction_enum = {
@@ -324,7 +359,7 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
 		mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
 
 	/* Load mode configuration to Counter Mode Register */
-	outb(0x20 | mode_cfg, base_offset);
+	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
 	return 0;
 }
@@ -364,7 +399,7 @@ static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
 	priv->synchronous_mode[chan->channel] = synchronous_mode;
 
 	/* Load Index Control configuration to Index Control Register */
-	outb(0x60 | idr_cfg, base_offset);
+	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
 	return 0;
 }
@@ -410,7 +445,7 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
 	priv->quadrature_mode[chan->channel] = quadrature_mode;
 
 	/* Load mode configuration to Counter Mode Register */
-	outb(0x20 | mode_cfg, base_offset);
+	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
 	return 0;
 }
@@ -446,7 +481,7 @@ static int quad8_set_index_polarity(struct iio_dev *indio_dev,
 	priv->index_polarity[chan->channel] = index_polarity;
 
 	/* Load Index Control configuration to Index Control Register */
-	outb(0x60 | idr_cfg, base_offset);
+	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
 	return 0;
 }
@@ -556,28 +591,28 @@ static int quad8_probe(struct device *dev, unsigned int id)
 	priv->base = base[id];
 
 	/* Reset all counters and disable interrupt function */
-	outb(0x01, base[id] + 0x11);
+	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 	/* Set initial configuration for all counters */
 	for (i = 0; i < QUAD8_NUM_COUNTERS; i++) {
 		base_offset = base[id] + 2 * i;
 		/* Reset Byte Pointer */
-		outb(0x01, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 		/* Reset Preset Register */
 		for (j = 0; j < 3; j++)
 			outb(0x00, base_offset);
 		/* Reset Borrow, Carry, Compare, and Sign flags */
-		outb(0x04, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
 		/* Reset Error flag */
-		outb(0x06, base_offset + 1);
+		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 		/* Binary encoding; Normal count; non-quadrature mode */
-		outb(0x20, base_offset + 1);
+		outb(QUAD8_CTR_CMR, base_offset + 1);
 		/* Disable A and B inputs; preset on index; FLG1 as Carry */
-		outb(0x40, base_offset + 1);
+		outb(QUAD8_CTR_IOR, base_offset + 1);
 		/* Disable index function; negative index polarity */
-		outb(0x60, base_offset + 1);
+		outb(QUAD8_CTR_IDR, base_offset + 1);
 	}
 	/* Enable all counters */
-	outb(0x00, base[id] + 0x11);
+	outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 
 	return devm_iio_device_register(dev, indio_dev);
 }
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index e136f0fd38f0..2ddbfc3fdbae 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -221,6 +221,7 @@ static struct iio_chan_spec name[] = {				\
 		AD5868_CHANNEL(7, 7, bits, _shift),		\
 }
 
+DECLARE_AD5693_CHANNELS(ad5311r_channels, 10, 6);
 DECLARE_AD5676_CHANNELS(ad5672_channels, 12, 4);
 DECLARE_AD5676_CHANNELS(ad5676_channels, 16, 0);
 DECLARE_AD5686_CHANNELS(ad5684_channels, 12, 4);
@@ -231,6 +232,12 @@ DECLARE_AD5693_CHANNELS(ad5692r_channels, 14, 2);
 DECLARE_AD5693_CHANNELS(ad5691r_channels, 12, 4);
 
 static const struct ad5686_chip_info ad5686_chip_info_tbl[] = {
+	[ID_AD5311R] = {
+		.channels = ad5311r_channels,
+		.int_vref_mv = 2500,
+		.num_channels = 1,
+		.regmap_type = AD5693_REGMAP,
+	},
 	[ID_AD5671R] = {
 		.channels = ad5672_channels,
 		.int_vref_mv = 2500,
diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h
index d05cda9f1edd..57b3c61bfb91 100644
--- a/drivers/iio/dac/ad5686.h
+++ b/drivers/iio/dac/ad5686.h
@@ -45,6 +45,7 @@
  * ad5686_supported_device_ids:
  */
 enum ad5686_supported_device_ids {
+	ID_AD5311R,
 	ID_AD5671R,
 	ID_AD5672R,
 	ID_AD5675R,
diff --git a/drivers/iio/dac/ad5696-i2c.c b/drivers/iio/dac/ad5696-i2c.c
index d18735d7d938..7350d9806a11 100644
--- a/drivers/iio/dac/ad5696-i2c.c
+++ b/drivers/iio/dac/ad5696-i2c.c
@@ -71,6 +71,7 @@ static int ad5686_i2c_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id ad5686_i2c_id[] = {
+	{"ad5311r", ID_AD5311R},
 	{"ad5671r", ID_AD5671R},
 	{"ad5675r", ID_AD5675R},
 	{"ad5691r", ID_AD5691R},
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index f9c0624505a2..de68e83fc52d 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -20,8 +20,6 @@
 #include <linux/jiffies.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/kfifo.h>
-#include <linux/spinlock.h>
 #include <linux/iio/iio.h>
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
@@ -84,7 +82,7 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = {
 static const struct inv_mpu6050_chip_config chip_config_6050 = {
 	.fsr = INV_MPU6050_FSR_2000DPS,
 	.lpf = INV_MPU6050_FILTER_20HZ,
-	.fifo_rate = INV_MPU6050_INIT_FIFO_RATE,
+	.divider = INV_MPU6050_FIFO_RATE_TO_DIVIDER(INV_MPU6050_INIT_FIFO_RATE),
 	.gyro_fifo_enable = false,
 	.accl_fifo_enable = false,
 	.accl_fs = INV_MPU6050_FS_02G,
@@ -280,7 +278,7 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
 	if (result)
 		goto error_power_off;
 
-	d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1;
+	d = INV_MPU6050_FIFO_RATE_TO_DIVIDER(INV_MPU6050_INIT_FIFO_RATE);
 	result = regmap_write(st->map, st->reg->sample_rate_div, d);
 	if (result)
 		goto error_power_off;
@@ -297,6 +295,13 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
 	memcpy(&st->chip_config, hw_info[st->chip_type].config,
 	       sizeof(struct inv_mpu6050_chip_config));
 
+	/*
+	 * Internal chip period is 1ms (1kHz).
+	 * Let's use at the beginning the theorical value before measuring
+	 * with interrupt timestamps.
+	 */
+	st->chip_period = NSEC_PER_MSEC;
+
 	return inv_mpu6050_set_power_itg(st, false);
 
 error_power_off:
@@ -630,7 +635,7 @@ static ssize_t
 inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	s32 fifo_rate;
+	int fifo_rate;
 	u8 d;
 	int result;
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -646,8 +651,13 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
 	if (result)
 		return result;
 
+	/* compute the chip sample rate divider */
+	d = INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate);
+	/* compute back the fifo rate to handle truncation cases */
+	fifo_rate = INV_MPU6050_DIVIDER_TO_FIFO_RATE(d);
+
 	mutex_lock(&st->lock);
-	if (fifo_rate == st->chip_config.fifo_rate) {
+	if (d == st->chip_config.divider) {
 		result = 0;
 		goto fifo_rate_fail_unlock;
 	}
@@ -655,11 +665,10 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
 	if (result)
 		goto fifo_rate_fail_unlock;
 
-	d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1;
 	result = regmap_write(st->map, st->reg->sample_rate_div, d);
 	if (result)
 		goto fifo_rate_fail_power_off;
-	st->chip_config.fifo_rate = fifo_rate;
+	st->chip_config.divider = d;
 
 	result = inv_mpu6050_set_lpf(st, fifo_rate);
 	if (result)
@@ -687,7 +696,7 @@ inv_fifo_rate_show(struct device *dev, struct device_attribute *attr,
 	unsigned fifo_rate;
 
 	mutex_lock(&st->lock);
-	fifo_rate = st->chip_config.fifo_rate;
+	fifo_rate = INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
 	mutex_unlock(&st->lock);
 
 	return scnprintf(buf, PAGE_SIZE, "%u\n", fifo_rate);
@@ -1003,7 +1012,7 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	indio_dev->modes = INDIO_BUFFER_TRIGGERED;
 
 	result = devm_iio_triggered_buffer_setup(dev, indio_dev,
-						 inv_mpu6050_irq_handler,
+						 iio_pollfunc_store_time,
 						 inv_mpu6050_read_fifo,
 						 NULL);
 	if (result) {
@@ -1016,8 +1025,6 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 		return result;
 	}
 
-	INIT_KFIFO(st->timestamps);
-	spin_lock_init(&st->time_stamp_lock);
 	result = devm_iio_device_register(dev, indio_dev);
 	if (result) {
 		dev_err(dev, "IIO register fail %d\n", result);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index c54da777945d..de8391693e17 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -12,8 +12,6 @@
 */
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
-#include <linux/kfifo.h>
-#include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -88,7 +86,7 @@ enum inv_devices {
  *  @accl_fs:		accel full scale range.
  *  @accl_fifo_enable:	enable accel data output
  *  @gyro_fifo_enable:	enable gyro data output
- *  @fifo_rate:		FIFO update rate.
+ *  @divider:		chip sample rate divider (sample rate divider - 1)
  */
 struct inv_mpu6050_chip_config {
 	unsigned int fsr:2;
@@ -96,7 +94,7 @@ struct inv_mpu6050_chip_config {
 	unsigned int accl_fs:2;
 	unsigned int accl_fifo_enable:1;
 	unsigned int gyro_fifo_enable:1;
-	u16 fifo_rate;
+	u8 divider;
 	u8 user_ctrl;
 };
 
@@ -116,40 +114,40 @@ struct inv_mpu6050_hw {
 
 /*
  *  struct inv_mpu6050_state - Driver state variables.
- *  @TIMESTAMP_FIFO_SIZE: fifo size for timestamp.
  *  @lock:              Chip access lock.
  *  @trig:              IIO trigger.
  *  @chip_config:	Cached attribute information.
  *  @reg:		Map of important registers.
  *  @hw:		Other hardware-specific information.
  *  @chip_type:		chip type.
- *  @time_stamp_lock:	spin lock to time stamp.
  *  @plat_data:		platform data (deprecated in favor of @orientation).
  *  @orientation:	sensor chip orientation relative to main hardware.
- *  @timestamps:        kfifo queue to store time stamp.
  *  @map		regmap pointer.
  *  @irq		interrupt number.
  *  @irq_mask		the int_pin_cfg mask to configure interrupt type.
+ *  @chip_period:	chip internal period estimation (~1kHz).
+ *  @it_timestamp:	timestamp from previous interrupt.
+ *  @data_timestamp:	timestamp for next data sample.
  */
 struct inv_mpu6050_state {
-#define TIMESTAMP_FIFO_SIZE 16
 	struct mutex lock;
 	struct iio_trigger  *trig;
 	struct inv_mpu6050_chip_config chip_config;
 	const struct inv_mpu6050_reg_map *reg;
 	const struct inv_mpu6050_hw *hw;
 	enum   inv_devices chip_type;
-	spinlock_t time_stamp_lock;
 	struct i2c_mux_core *muxc;
 	struct i2c_client *mux_client;
 	unsigned int powerup_count;
 	struct inv_mpu6050_platform_data plat_data;
 	struct iio_mount_matrix orientation;
-	DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
 	struct regmap *map;
 	int irq;
 	u8 irq_mask;
 	unsigned skip_samples;
+	s64 chip_period;
+	s64 it_timestamp;
+	s64 data_timestamp;
 };
 
 /*register and associated bit definition*/
@@ -174,6 +172,7 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_REG_RAW_GYRO            0x43
 
 #define INV_MPU6050_REG_INT_STATUS          0x3A
+#define INV_MPU6050_BIT_FIFO_OVERFLOW_INT   0x10
 #define INV_MPU6050_BIT_RAW_DATA_RDY_INT    0x01
 
 #define INV_MPU6050_REG_USER_CTRL           0x6A
@@ -198,7 +197,6 @@ struct inv_mpu6050_state {
 
 #define INV_MPU6050_BYTES_PER_3AXIS_SENSOR   6
 #define INV_MPU6050_FIFO_COUNT_BYTE          2
-#define INV_MPU6050_FIFO_THRESHOLD           500
 
 /* mpu6500 registers */
 #define INV_MPU6500_REG_ACCEL_CONFIG_2      0x1D
@@ -231,13 +229,24 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_LATCH_INT_EN	0x20
 #define INV_MPU6050_BIT_BYPASS_EN	0x2
 
+/* Allowed timestamp period jitter in percent */
+#define INV_MPU6050_TS_PERIOD_JITTER	4
 
 /* init parameters */
 #define INV_MPU6050_INIT_FIFO_RATE           50
-#define INV_MPU6050_TIME_STAMP_TOR           5
 #define INV_MPU6050_MAX_FIFO_RATE            1000
 #define INV_MPU6050_MIN_FIFO_RATE            4
-#define INV_MPU6050_ONE_K_HZ                 1000
+
+/* chip internal frequency: 1KHz */
+#define INV_MPU6050_INTERNAL_FREQ_HZ		1000
+/* return the frequency divider (chip sample rate divider + 1) */
+#define INV_MPU6050_FREQ_DIVIDER(st)					\
+	((st)->chip_config.divider + 1)
+/* chip sample rate divider to fifo rate */
+#define INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate)			\
+	((INV_MPU6050_INTERNAL_FREQ_HZ / (fifo_rate)) - 1)
+#define INV_MPU6050_DIVIDER_TO_FIFO_RATE(divider)			\
+	(INV_MPU6050_INTERNAL_FREQ_HZ / ((divider) + 1))
 
 #define INV_MPU6050_REG_WHOAMI			117
 
@@ -300,7 +309,6 @@ enum inv_mpu6050_clock_sel_e {
 	NUM_CLK
 };
 
-irqreturn_t inv_mpu6050_irq_handler(int irq, void *p);
 irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
 int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type);
 int inv_reset_fifo(struct iio_dev *indio_dev);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 1795418438e4..548e042f7b5b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -19,18 +19,83 @@
 #include <linux/jiffies.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/kfifo.h>
 #include <linux/poll.h>
+#include <linux/math64.h>
+#include <asm/unaligned.h>
 #include "inv_mpu_iio.h"
 
-static void inv_clear_kfifo(struct inv_mpu6050_state *st)
+/**
+ *  inv_mpu6050_update_period() - Update chip internal period estimation
+ *
+ *  @st:		driver state
+ *  @timestamp:		the interrupt timestamp
+ *  @nb:		number of data set in the fifo
+ *
+ *  This function uses interrupt timestamps to estimate the chip period and
+ *  to choose the data timestamp to come.
+ */
+static void inv_mpu6050_update_period(struct inv_mpu6050_state *st,
+				      s64 timestamp, size_t nb)
 {
-	unsigned long flags;
+	/* Period boundaries for accepting timestamp */
+	const s64 period_min =
+		(NSEC_PER_MSEC * (100 - INV_MPU6050_TS_PERIOD_JITTER)) / 100;
+	const s64 period_max =
+		(NSEC_PER_MSEC * (100 + INV_MPU6050_TS_PERIOD_JITTER)) / 100;
+	const s32 divider = INV_MPU6050_FREQ_DIVIDER(st);
+	s64 delta, interval;
+	bool use_it_timestamp = false;
+
+	if (st->it_timestamp == 0) {
+		/* not initialized, forced to use it_timestamp */
+		use_it_timestamp = true;
+	} else if (nb == 1) {
+		/*
+		 * Validate the use of it timestamp by checking if interrupt
+		 * has been delayed.
+		 * nb > 1 means interrupt was delayed for more than 1 sample,
+		 * so it's obviously not good.
+		 * Compute the chip period between 2 interrupts for validating.
+		 */
+		delta = div_s64(timestamp - st->it_timestamp, divider);
+		if (delta > period_min && delta < period_max) {
+			/* update chip period and use it timestamp */
+			st->chip_period = (st->chip_period + delta) / 2;
+			use_it_timestamp = true;
+		}
+	}
+
+	if (use_it_timestamp) {
+		/*
+		 * Manage case of multiple samples in the fifo (nb > 1):
+		 * compute timestamp corresponding to the first sample using
+		 * estimated chip period.
+		 */
+		interval = (nb - 1) * st->chip_period * divider;
+		st->data_timestamp = timestamp - interval;
+	}
 
-	/* take the spin lock sem to avoid interrupt kick in */
-	spin_lock_irqsave(&st->time_stamp_lock, flags);
-	kfifo_reset(&st->timestamps);
-	spin_unlock_irqrestore(&st->time_stamp_lock, flags);
+	/* save it timestamp */
+	st->it_timestamp = timestamp;
+}
+
+/**
+ *  inv_mpu6050_get_timestamp() - Return the current data timestamp
+ *
+ *  @st:		driver state
+ *  @return:		current data timestamp
+ *
+ *  This function returns the current data timestamp and prepares for next one.
+ */
+static s64 inv_mpu6050_get_timestamp(struct inv_mpu6050_state *st)
+{
+	s64 ts;
+
+	/* return current data timestamp and increment */
+	ts = st->data_timestamp;
+	st->data_timestamp += st->chip_period * INV_MPU6050_FREQ_DIVIDER(st);
+
+	return ts;
 }
 
 int inv_reset_fifo(struct iio_dev *indio_dev)
@@ -39,6 +104,9 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
 	u8 d;
 	struct inv_mpu6050_state  *st = iio_priv(indio_dev);
 
+	/* reset it timestamp validation */
+	st->it_timestamp = 0;
+
 	/* disable interrupt */
 	result = regmap_write(st->map, st->reg->int_enable, 0);
 	if (result) {
@@ -62,9 +130,6 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
 	if (result)
 		goto reset_fifo_fail;
 
-	/* clear timestamps fifo */
-	inv_clear_kfifo(st);
-
 	/* enable interrupt */
 	if (st->chip_config.accl_fifo_enable ||
 	    st->chip_config.gyro_fifo_enable) {
@@ -99,23 +164,6 @@ reset_fifo_fail:
 }
 
 /**
- * inv_mpu6050_irq_handler() - Cache a timestamp at each data ready interrupt.
- */
-irqreturn_t inv_mpu6050_irq_handler(int irq, void *p)
-{
-	struct iio_poll_func *pf = p;
-	struct iio_dev *indio_dev = pf->indio_dev;
-	struct inv_mpu6050_state *st = iio_priv(indio_dev);
-	s64 timestamp;
-
-	timestamp = iio_get_time_ns(indio_dev);
-	kfifo_in_spinlocked(&st->timestamps, &timestamp, 1,
-			    &st->time_stamp_lock);
-
-	return IRQ_WAKE_THREAD;
-}
-
-/**
  * inv_mpu6050_read_fifo() - Transfer data from hardware FIFO to KFIFO.
  */
 irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
@@ -129,6 +177,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 	u16 fifo_count;
 	s64 timestamp;
 	int int_status;
+	size_t i, nb;
 
 	mutex_lock(&st->lock);
 
@@ -139,6 +188,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 			"failed to ack interrupt\n");
 		goto flush_fifo;
 	}
+	/* handle fifo overflow by reseting fifo */
+	if (int_status & INV_MPU6050_BIT_FIFO_OVERFLOW_INT)
+		goto flush_fifo;
 	if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) {
 		dev_warn(regmap_get_device(st->map),
 			"spurious interrupt with status 0x%x\n", int_status);
@@ -163,38 +215,23 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 				  INV_MPU6050_FIFO_COUNT_BYTE);
 	if (result)
 		goto end_session;
-	fifo_count = be16_to_cpup((__be16 *)(&data[0]));
-	if (fifo_count < bytes_per_datum)
-		goto end_session;
-	/* fifo count can't be an odd number. If it is odd, reset the FIFO. */
-	if (fifo_count & 1)
-		goto flush_fifo;
-	if (fifo_count >  INV_MPU6050_FIFO_THRESHOLD)
-		goto flush_fifo;
-	/* Timestamp mismatch. */
-	if (kfifo_len(&st->timestamps) >
-	    fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR)
-		goto flush_fifo;
-	do {
+	fifo_count = get_unaligned_be16(&data[0]);
+	/* compute and process all complete datum */
+	nb = fifo_count / bytes_per_datum;
+	inv_mpu6050_update_period(st, pf->timestamp, nb);
+	for (i = 0; i < nb; ++i) {
 		result = regmap_bulk_read(st->map, st->reg->fifo_r_w,
 					  data, bytes_per_datum);
 		if (result)
 			goto flush_fifo;
-
-		result = kfifo_out(&st->timestamps, &timestamp, 1);
-		/* when there is no timestamp, put timestamp as 0 */
-		if (result == 0)
-			timestamp = 0;
-
 		/* skip first samples if needed */
-		if (st->skip_samples)
+		if (st->skip_samples) {
 			st->skip_samples--;
-		else
-			iio_push_to_buffers_with_timestamp(indio_dev, data,
-							   timestamp);
-
-		fifo_count -= bytes_per_datum;
-	} while (fifo_count >= bytes_per_datum);
+			continue;
+		}
+		timestamp = inv_mpu6050_get_timestamp(st);
+		iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp);
+	}
 
 end_session:
 	mutex_unlock(&st->lock);
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 19bdf3d2962a..ed1b3ebade94 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -85,6 +85,7 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_COUNT] = "count",
 	[IIO_INDEX] = "index",
 	[IIO_GRAVITY]  = "gravity",
+	[IIO_POSITIONRELATIVE]  = "positionrelative",
 };
 
 static const char * const iio_modifier_names[] = {
@@ -207,35 +208,27 @@ static int iio_device_set_clock(struct iio_dev *indio_dev, clockid_t clock_id)
  */
 s64 iio_get_time_ns(const struct iio_dev *indio_dev)
 {
-	struct timespec tp;
+	struct timespec64 tp;
 
 	switch (iio_device_get_clock(indio_dev)) {
 	case CLOCK_REALTIME:
-		ktime_get_real_ts(&tp);
-		break;
+		return ktime_get_real_ns();
 	case CLOCK_MONOTONIC:
-		ktime_get_ts(&tp);
-		break;
+		return ktime_get_ns();
 	case CLOCK_MONOTONIC_RAW:
-		getrawmonotonic(&tp);
-		break;
+		return ktime_get_raw_ns();
 	case CLOCK_REALTIME_COARSE:
-		tp = current_kernel_time();
-		break;
+		return ktime_to_ns(ktime_get_coarse_real());
 	case CLOCK_MONOTONIC_COARSE:
-		tp = get_monotonic_coarse();
-		break;
+		ktime_get_coarse_ts64(&tp);
+		return timespec64_to_ns(&tp);
 	case CLOCK_BOOTTIME:
-		get_monotonic_boottime(&tp);
-		break;
+		return ktime_get_boot_ns();
 	case CLOCK_TAI:
-		timekeeping_clocktai(&tp);
-		break;
+		return ktime_get_tai_ns();
 	default:
 		BUG();
 	}
-
-	return timespec_to_ns(&tp);
 }
 EXPORT_SYMBOL(iio_get_time_ns);
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 32267c1afebc..66d1a220726a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -92,6 +92,19 @@ config TOUCHSCREEN_AD7879_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7879-spi.
 
+config TOUCHSCREEN_ADC
+	tristate "Generic ADC based resistive touchscreen"
+	depends on IIO
+	select IIO_BUFFER_CB
+	help
+	  Say Y here if you want to use the generic ADC
+	  resistive touchscreen driver.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called resistive-adc-touch.ko.
+
 config TOUCHSCREEN_AR1021_I2C
 	tristate "Microchip AR1020/1021 i2c touchscreen"
 	depends on I2C && OF
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index fd4fd32fb73f..35bd0619edf1 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7877)	+= ad7877.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
+obj-$(CONFIG_TOUCHSCREEN_ADC)		+= resistive-adc-touch.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
diff --git a/drivers/input/touchscreen/resistive-adc-touch.c b/drivers/input/touchscreen/resistive-adc-touch.c
new file mode 100644
index 000000000000..cfc8bb4553f7
--- /dev/null
+++ b/drivers/input/touchscreen/resistive-adc-touch.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADC generic resistive touchscreen (GRTS)
+ * This is a generic input driver that connects to an ADC
+ * given the channels in device tree, and reports events to the input
+ * subsystem.
+ *
+ * Copyright (C) 2017,2018 Microchip Technology,
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *
+ */
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME					"resistive-adc-touch"
+#define GRTS_DEFAULT_PRESSURE_MIN			50000
+#define GRTS_MAX_POS_MASK				GENMASK(11, 0)
+
+/**
+ * grts_state - generic resistive touch screen information struct
+ * @pressure_min:	number representing the minimum for the pressure
+ * @pressure:		are we getting pressure info or not
+ * @iio_chans:		list of channels acquired
+ * @iio_cb:		iio_callback buffer for the data
+ * @input:		the input device structure that we register
+ * @prop:		touchscreen properties struct
+ */
+struct grts_state {
+	u32				pressure_min;
+	bool				pressure;
+	struct iio_channel		*iio_chans;
+	struct iio_cb_buffer		*iio_cb;
+	struct input_dev		*input;
+	struct touchscreen_properties	prop;
+};
+
+static int grts_cb(const void *data, void *private)
+{
+	const u16 *touch_info = data;
+	struct grts_state *st = private;
+	unsigned int x, y, press = 0x0;
+
+	/* channel data coming in buffer in the order below */
+	x = touch_info[0];
+	y = touch_info[1];
+	if (st->pressure)
+		press = touch_info[2];
+
+	if ((!x && !y) || (st->pressure && (press < st->pressure_min))) {
+		/* report end of touch */
+		input_report_key(st->input, BTN_TOUCH, 0);
+		input_sync(st->input);
+		return 0;
+	}
+
+	/* report proper touch to subsystem*/
+	touchscreen_report_pos(st->input, &st->prop, x, y, false);
+	if (st->pressure)
+		input_report_abs(st->input, ABS_PRESSURE, press);
+	input_report_key(st->input, BTN_TOUCH, 1);
+	input_sync(st->input);
+
+	return 0;
+}
+
+static int grts_open(struct input_dev *dev)
+{
+	int error;
+	struct grts_state *st = input_get_drvdata(dev);
+
+	error = iio_channel_start_all_cb(st->iio_cb);
+	if (error) {
+		dev_err(dev->dev.parent, "failed to start callback buffer.\n");
+		return error;
+	}
+	return 0;
+}
+
+static void grts_close(struct input_dev *dev)
+{
+	struct grts_state *st = input_get_drvdata(dev);
+
+	iio_channel_stop_all_cb(st->iio_cb);
+}
+
+static void grts_disable(void *data)
+{
+	iio_channel_release_all_cb(data);
+}
+
+static int grts_probe(struct platform_device *pdev)
+{
+	struct grts_state *st;
+	struct input_dev *input;
+	struct device *dev = &pdev->dev;
+	struct iio_channel *chan;
+	int error;
+
+	st = devm_kzalloc(dev, sizeof(struct grts_state), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	/* get the channels from IIO device */
+	st->iio_chans = devm_iio_channel_get_all(dev);
+	if (IS_ERR(st->iio_chans)) {
+		error = PTR_ERR(st->iio_chans);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "can't get iio channels.\n");
+		return error;
+	}
+
+	chan = &st->iio_chans[0];
+	st->pressure = false;
+	while (chan && chan->indio_dev) {
+		if (!strcmp(chan->channel->datasheet_name, "pressure"))
+			st->pressure = true;
+		chan++;
+	}
+
+	if (st->pressure) {
+		error = device_property_read_u32(dev,
+						 "touchscreen-min-pressure",
+						 &st->pressure_min);
+		if (error) {
+			dev_dbg(dev, "can't get touchscreen-min-pressure property.\n");
+			st->pressure_min = GRTS_DEFAULT_PRESSURE_MIN;
+		}
+	}
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "failed to allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	input->name = DRIVER_NAME;
+	input->id.bustype = BUS_HOST;
+	input->open = grts_open;
+	input->close = grts_close;
+
+	input_set_abs_params(input, ABS_X, 0, GRTS_MAX_POS_MASK - 1, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, GRTS_MAX_POS_MASK - 1, 0, 0);
+	if (st->pressure)
+		input_set_abs_params(input, ABS_PRESSURE, st->pressure_min,
+				     0xffff, 0, 0);
+
+	input_set_capability(input, EV_KEY, BTN_TOUCH);
+
+	/* parse optional device tree properties */
+	touchscreen_parse_properties(input, false, &st->prop);
+
+	st->input = input;
+	input_set_drvdata(input, st);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "failed to register input device.");
+		return error;
+	}
+
+	st->iio_cb = iio_channel_get_all_cb(dev, grts_cb, st);
+	if (IS_ERR(st->iio_cb)) {
+		dev_err(dev, "failed to allocate callback buffer.\n");
+		return PTR_ERR(st->iio_cb);
+	}
+
+	error = devm_add_action_or_reset(dev, grts_disable, st->iio_cb);
+	if (error) {
+		dev_err(dev, "failed to add disable action.\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id grts_of_match[] = {
+	{
+		.compatible = "resistive-adc-touch",
+	}, {
+		/* sentinel */
+	},
+};
+
+MODULE_DEVICE_TABLE(of, grts_of_match);
+
+static struct platform_driver grts_driver = {
+	.probe = grts_probe,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(grts_of_match),
+	},
+};
+
+module_platform_driver(grts_driver);
+
+MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
+MODULE_DESCRIPTION("Generic ADC Resistive Touch Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index aee2335a25a1..e86ac9e47867 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -9,7 +9,6 @@ source "drivers/staging/iio/adc/Kconfig"
 source "drivers/staging/iio/addac/Kconfig"
 source "drivers/staging/iio/cdc/Kconfig"
 source "drivers/staging/iio/frequency/Kconfig"
-source "drivers/staging/iio/gyro/Kconfig"
 source "drivers/staging/iio/impedance-analyzer/Kconfig"
 source "drivers/staging/iio/meter/Kconfig"
 source "drivers/staging/iio/resolver/Kconfig"
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index c28d657497de..b15904b99581 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -8,7 +8,6 @@ obj-y += adc/
 obj-y += addac/
 obj-y += cdc/
 obj-y += frequency/
-obj-y += gyro/
 obj-y += impedance-analyzer/
 obj-y += meter/
 obj-y += resolver/
diff --git a/drivers/staging/iio/accel/adis16203.c b/drivers/staging/iio/accel/adis16203.c
index b3e4571340ab..5cc96c8086b5 100644
--- a/drivers/staging/iio/accel/adis16203.c
+++ b/drivers/staging/iio/accel/adis16203.c
@@ -168,7 +168,6 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
 {
 	struct adis *st = iio_priv(indio_dev);
 	int ret;
-	int bits;
 	u8 addr;
 	s16 val16;
 
@@ -202,14 +201,11 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
 		*val = 25000 / -470 - 1278; /* 25 C = 1278 */
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_CALIBBIAS:
-		bits = 14;
 		addr = adis16203_addresses[chan->scan_index];
 		ret = adis_read_reg_16(st, addr, &val16);
 		if (ret)
 			return ret;
-		val16 &= (1 << bits) - 1;
-		val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
-		*val = val16;
+		*val = sign_extend32(val16, 13);
 		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
diff --git a/drivers/staging/iio/accel/adis16240.c b/drivers/staging/iio/accel/adis16240.c
index fff6d99089cc..24e525f1ef25 100644
--- a/drivers/staging/iio/accel/adis16240.c
+++ b/drivers/staging/iio/accel/adis16240.c
@@ -250,7 +250,6 @@ static int adis16240_read_raw(struct iio_dev *indio_dev,
 {
 	struct adis *st = iio_priv(indio_dev);
 	int ret;
-	int bits;
 	u8 addr;
 	s16 val16;
 
@@ -287,24 +286,18 @@ static int adis16240_read_raw(struct iio_dev *indio_dev,
 		*val = 25000 / 244 - 0x133; /* 25 C = 0x133 */
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_CALIBBIAS:
-		bits = 10;
 		addr = adis16240_addresses[chan->scan_index][0];
 		ret = adis_read_reg_16(st, addr, &val16);
 		if (ret)
 			return ret;
-		val16 &= (1 << bits) - 1;
-		val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
-		*val = val16;
+		*val = sign_extend32(val16, 9);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_PEAK:
-		bits = 10;
 		addr = adis16240_addresses[chan->scan_index][1];
 		ret = adis_read_reg_16(st, addr, &val16);
 		if (ret)
 			return ret;
-		val16 &= (1 << bits) - 1;
-		val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
-		*val = val16;
+		*val = sign_extend32(val16, 9);
 		return IIO_VAL_INT;
 	}
 	return -EINVAL;
diff --git a/drivers/staging/iio/adc/ad7606.h b/drivers/staging/iio/adc/ad7606.h
index acaed8d5379c..9716ee9d94a7 100644
--- a/drivers/staging/iio/adc/ad7606.h
+++ b/drivers/staging/iio/adc/ad7606.h
@@ -57,7 +57,7 @@ struct ad7606_state {
 
 struct ad7606_bus_ops {
 	/* more methods added in future? */
-	int (*read_block)(struct device *, int, void *);
+	int (*read_block)(struct device *dev, int num, void *data);
 };
 
 int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
diff --git a/drivers/staging/iio/gyro/Kconfig b/drivers/staging/iio/gyro/Kconfig
deleted file mode 100644
index f62f68fd6f3f..000000000000
--- a/drivers/staging/iio/gyro/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# IIO Digital Gyroscope Sensor drivers configuration
-#
-menu "Digital gyroscope sensors"
-
-config ADIS16060
-	tristate "Analog Devices ADIS16060 Yaw Rate Gyroscope with SPI driver"
-	depends on SPI
-	help
-	  Say Y (yes) here to build support for Analog Devices adis16060 wide bandwidth
-	  yaw rate gyroscope with SPI.
-
-	  To compile this driver as a module, say M here: the module will be
-	  called adis16060. If unsure, say N.
-
-endmenu
diff --git a/drivers/staging/iio/gyro/Makefile b/drivers/staging/iio/gyro/Makefile
deleted file mode 100644
index cf22d6d55e27..000000000000
--- a/drivers/staging/iio/gyro/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for digital gyroscope sensor drivers
-#
-
-adis16060-y             := adis16060_core.o
-obj-$(CONFIG_ADIS16060) += adis16060.o
diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
deleted file mode 100644
index 4e7630caf7d3..000000000000
--- a/drivers/staging/iio/gyro/adis16060_core.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * ADIS16060 Wide Bandwidth Yaw Rate Gyroscope with SPI driver
- *
- * Copyright 2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-#define ADIS16060_GYRO		0x20 /* Measure Angular Rate (Gyro) */
-#define ADIS16060_TEMP_OUT	0x10 /* Measure Temperature */
-#define ADIS16060_AIN2		0x80 /* Measure AIN2 */
-#define ADIS16060_AIN1		0x40 /* Measure AIN1 */
-
-/**
- * struct adis16060_state - device instance specific data
- * @us_w:		actual spi_device to write config
- * @us_r:		actual spi_device to read back data
- * @buf:		transmit or receive buffer
- * @buf_lock:		mutex to protect tx and rx
- **/
-struct adis16060_state {
-	struct spi_device		*us_w;
-	struct spi_device		*us_r;
-	struct mutex			buf_lock;
-
-	u8 buf[3] ____cacheline_aligned;
-};
-
-static struct iio_dev *adis16060_iio_dev;
-
-static int adis16060_spi_write_then_read(struct iio_dev *indio_dev,
-					 u8 conf, u16 *val)
-{
-	int ret;
-	struct adis16060_state *st = iio_priv(indio_dev);
-
-	mutex_lock(&st->buf_lock);
-	st->buf[2] = conf; /* The last 8 bits clocked in are latched */
-	ret = spi_write(st->us_w, st->buf, 3);
-
-	if (ret < 0) {
-		mutex_unlock(&st->buf_lock);
-		return ret;
-	}
-
-	ret = spi_read(st->us_r, st->buf, 3);
-
-	/* The internal successive approximation ADC begins the
-	 * conversion process on the falling edge of MSEL1 and
-	 * starts to place data MSB first on the DOUT line at
-	 * the 6th falling edge of SCLK
-	 */
-	if (!ret)
-		*val = ((st->buf[0] & 0x3) << 12) |
-			(st->buf[1] << 4) |
-			((st->buf[2] >> 4) & 0xF);
-	mutex_unlock(&st->buf_lock);
-
-	return ret;
-}
-
-static int adis16060_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
-{
-	u16 tval = 0;
-	int ret;
-
-	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
-		ret = adis16060_spi_write_then_read(indio_dev,
-						    chan->address, &tval);
-		if (ret < 0)
-			return ret;
-
-		*val = tval;
-		return IIO_VAL_INT;
-	case IIO_CHAN_INFO_OFFSET:
-		*val = -7;
-		*val2 = 461117;
-		return IIO_VAL_INT_PLUS_MICRO;
-	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		*val2 = 34000;
-		return IIO_VAL_INT_PLUS_MICRO;
-	}
-
-	return -EINVAL;
-}
-
-static const struct iio_info adis16060_info = {
-	.read_raw = adis16060_read_raw,
-};
-
-static const struct iio_chan_spec adis16060_channels[] = {
-	{
-		.type = IIO_ANGL_VEL,
-		.modified = 1,
-		.channel2 = IIO_MOD_Z,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.address = ADIS16060_GYRO,
-	}, {
-		.type = IIO_VOLTAGE,
-		.indexed = 1,
-		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.address = ADIS16060_AIN1,
-	}, {
-		.type = IIO_VOLTAGE,
-		.indexed = 1,
-		.channel = 1,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.address = ADIS16060_AIN2,
-	}, {
-		.type = IIO_TEMP,
-		.indexed = 1,
-		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE),
-		.address = ADIS16060_TEMP_OUT,
-	}
-};
-
-static int adis16060_r_probe(struct spi_device *spi)
-{
-	int ret;
-	struct adis16060_state *st;
-	struct iio_dev *indio_dev;
-
-	/* setup the industrialio driver allocated elements */
-	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
-	if (!indio_dev)
-		return -ENOMEM;
-	/* this is only used for removal purposes */
-	spi_set_drvdata(spi, indio_dev);
-	st = iio_priv(indio_dev);
-	st->us_r = spi;
-	mutex_init(&st->buf_lock);
-
-	indio_dev->name = spi->dev.driver->name;
-	indio_dev->dev.parent = &spi->dev;
-	indio_dev->info = &adis16060_info;
-	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = adis16060_channels;
-	indio_dev->num_channels = ARRAY_SIZE(adis16060_channels);
-
-	ret = devm_iio_device_register(&spi->dev, indio_dev);
-	if (ret)
-		return ret;
-
-	adis16060_iio_dev = indio_dev;
-	return 0;
-}
-
-static int adis16060_w_probe(struct spi_device *spi)
-{
-	int ret;
-	struct iio_dev *indio_dev = adis16060_iio_dev;
-	struct adis16060_state *st;
-
-	if (!indio_dev) {
-		ret =  -ENODEV;
-		goto error_ret;
-	}
-	st = iio_priv(indio_dev);
-	spi_set_drvdata(spi, indio_dev);
-	st->us_w = spi;
-	return 0;
-
-error_ret:
-	return ret;
-}
-
-static int adis16060_w_remove(struct spi_device *spi)
-{
-	return 0;
-}
-
-static struct spi_driver adis16060_r_driver = {
-	.driver = {
-		.name = "adis16060_r",
-	},
-	.probe = adis16060_r_probe,
-};
-
-static struct spi_driver adis16060_w_driver = {
-	.driver = {
-		.name = "adis16060_w",
-	},
-	.probe = adis16060_w_probe,
-	.remove = adis16060_w_remove,
-};
-
-static __init int adis16060_init(void)
-{
-	int ret;
-
-	ret = spi_register_driver(&adis16060_r_driver);
-	if (ret < 0)
-		return ret;
-
-	ret = spi_register_driver(&adis16060_w_driver);
-	if (ret < 0) {
-		spi_unregister_driver(&adis16060_r_driver);
-		return ret;
-	}
-
-	return 0;
-}
-module_init(adis16060_init);
-
-static __exit void adis16060_exit(void)
-{
-	spi_unregister_driver(&adis16060_w_driver);
-	spi_unregister_driver(&adis16060_r_driver);
-}
-module_exit(adis16060_exit);
-
-MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
-MODULE_DESCRIPTION("Analog Devices ADIS16060 Yaw Rate Gyroscope Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/iio/adc/at91-sama5d2_adc.h b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h
new file mode 100644
index 000000000000..70f99dbdbb42
--- /dev/null
+++ b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for configuring the AT91 SAMA5D2 ADC
+ */
+
+#ifndef _DT_BINDINGS_IIO_ADC_AT91_SAMA5D2_ADC_H
+#define _DT_BINDINGS_IIO_ADC_AT91_SAMA5D2_ADC_H
+
+/* X relative position channel index */
+#define AT91_SAMA5D2_ADC_X_CHANNEL		24
+/* Y relative position channel index */
+#define AT91_SAMA5D2_ADC_Y_CHANNEL		25
+/* pressure channel index */
+#define AT91_SAMA5D2_ADC_P_CHANNEL		26
+
+#endif
diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h
index 4213cdf88e3c..033c7d28924e 100644
--- a/include/uapi/linux/iio/types.h
+++ b/include/uapi/linux/iio/types.h
@@ -44,6 +44,7 @@ enum iio_chan_type {
 	IIO_COUNT,
 	IIO_INDEX,
 	IIO_GRAVITY,
+	IIO_POSITIONRELATIVE,
 };
 
 enum iio_modifier {
diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c
index b61245e1181d..148f69dfae75 100644
--- a/tools/iio/iio_event_monitor.c
+++ b/tools/iio/iio_event_monitor.c
@@ -58,6 +58,7 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_PH] = "ph",
 	[IIO_UVINDEX] = "uvindex",
 	[IIO_GRAVITY] = "gravity",
+	[IIO_POSITIONRELATIVE] = "positionrelative",
 };
 
 static const char * const iio_ev_type_text[] = {
@@ -151,6 +152,7 @@ static bool event_is_known(struct iio_event_data *event)
 	case IIO_PH:
 	case IIO_UVINDEX:
 	case IIO_GRAVITY:
+	case IIO_POSITIONRELATIVE:
 		break;
 	default:
 		return false;
author	Greg Kroah-Hartman	2018-06-26 01:47:37 +0200
committer	Greg Kroah-Hartman	2018-06-26 01:47:37 +0200
commit	f62252bf39445d4155c70871a8ce486f872d1442 (patch)
tree	ca366e3997bb5a631f37dfc6fd26ffc6245d5c9a
parent	Staging: comedi: comedi_compat32.h: fixed missing or malformed SPDX-License-I... (diff)
parent	iio: adc: at91-sama5d2_adc: add support for oversampling resolution (diff)
download	kernel-qcow2-linux-f62252bf39445d4155c70871a8ce486f872d1442.tar.gz kernel-qcow2-linux-f62252bf39445d4155c70871a8ce486f872d1442.tar.xz kernel-qcow2-linux-f62252bf39445d4155c70871a8ce486f872d1442.zip