diff options
| author | Mauro Carvalho Chehab | 2014-03-11 10:55:49 +0100 |
|---|---|---|
| committer | Mauro Carvalho Chehab | 2014-03-11 10:55:49 +0100 |
| commit | c897df0e2dbc81bcc09c11425658d69830825364 (patch) | |
| tree | 04c268e4951f2b75acb6873307673e45d05a635e /Documentation | |
| parent | [media] omap3isp: Fix kerneldoc for _module_sync_is_stopping and isp_isr() (diff) | |
| parent | Linux 3.14-rc5 (diff) | |
| download | kernel-qcow2-linux-c897df0e2dbc81bcc09c11425658d69830825364.tar.gz kernel-qcow2-linux-c897df0e2dbc81bcc09c11425658d69830825364.tar.xz kernel-qcow2-linux-c897df0e2dbc81bcc09c11425658d69830825364.zip | |
Merge tag 'v3.14-rc5' into patchwork
Linux 3.14-rc5
* tag 'v3.14-rc5': (1117 commits)
Linux 3.14-rc5
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
MAINTAINERS: add maintainer entry for Armada DRM driver
arm64: Fix !CONFIG_SMP kernel build
arm64: mm: Add double logical invert to pte accessors
dm cache: fix truncation bug when mapping I/O to >2TB fast device
perf tools: Fix strict alias issue for find_first_bit
powerpc/powernv: Fix indirect XSCOM unmangling
powerpc/powernv: Fix opal_xscom_{read,write} prototype
powerpc/powernv: Refactor PHB diag-data dump
powerpc/powernv: Dump PHB diag-data immediately
powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
powerpc/ftrace: bugfix for test_24bit_addr
powerpc/crashdump : Fix page frame number check in copy_oldmem_page
powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
kvm, vmx: Really fix lazy FPU on nested guest
perf tools: fix BFD detection on opensuse
drm/radeon: enable speaker allocation setup on dce3.2
...
Diffstat (limited to 'Documentation')
47 files changed, 665 insertions, 136 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 38f8444bdd0e..07de7e19b4ce 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -29,6 +29,8 @@ DMA-ISA-LPC.txt - How to do DMA with ISA (and LPC) devices. DMA-attributes.txt - listing of the various possible attributes a DMA region can have +dmatest.txt + - how to compile, configure and use the dmatest system. DocBook/ - directory with DocBook templates etc. for kernel documentation. EDID/ @@ -77,6 +79,8 @@ arm/ - directory with info about Linux on the ARM architecture. arm64/ - directory with info about Linux on the 64 bit ARM architecture. +assoc_array.txt + - generic associative array intro. atomic_ops.txt - semantics and behavior of atomic and bitmask operations. auxdisplay/ @@ -87,6 +91,8 @@ bad_memory.txt - how to use kernel parameters to exclude bad RAM regions. basic_profiling.txt - basic instructions for those who wants to profile Linux kernel. +bcache.txt + - Block-layer cache on fast SSDs to improve slow (raid) I/O performance. binfmt_misc.txt - info on the kernel support for extra binary formats. blackfin/ @@ -171,6 +177,8 @@ early-userspace/ - info about initramfs, klibc, and userspace early during boot. edac.txt - information on EDAC - Error Detection And Correction +efi-stub.txt + - How to use the EFI boot stub to bypass GRUB or elilo on EFI systems. eisa.txt - info on EISA bus support. email-clients.txt @@ -195,8 +203,8 @@ futex-requeue-pi.txt - info on requeueing of tasks from a non-PI futex to a PI futex gcov.txt - use of GCC's coverage testing tool "gcov" with the Linux kernel -gpio.txt - - overview of GPIO (General Purpose Input/Output) access conventions. +gpio/ + - gpio related documentation hid/ - directory with information on human interface devices highuid.txt @@ -255,6 +263,8 @@ kernel-docs.txt - listing of various WWW + books that document kernel internals. kernel-parameters.txt - summary listing of command line / boot prompt args for the kernel. +kernel-per-CPU-kthreads.txt + - List of all per-CPU kthreads and how they introduce jitter. kmemcheck.txt - info on dynamic checker that detects uses of uninitialized memory. kmemleak.txt @@ -299,8 +309,6 @@ memory-devices/ - directory with info on parts like the Texas Instruments EMIF driver memory-hotplug.txt - Hotpluggable memory support, how to use and current status. -memory.txt - - info on typical Linux memory problems. metag/ - directory with info about Linux on Meta architecture. mips/ @@ -311,6 +319,8 @@ mmc/ - directory with info about the MMC subsystem mn10300/ - directory with info about the mn10300 architecture port +module-signing.txt + - Kernel module signing for increased security when loading modules. mtd/ - directory with info about memory technology devices (flash) mono.txt @@ -343,6 +353,8 @@ pcmcia/ - info on the Linux PCMCIA driver. percpu-rw-semaphore.txt - RCU based read-write semaphore optimized for locking for reading +phy.txt + - Description of the generic PHY framework. pi-futex.txt - documentation on lightweight priority inheritance futexes. pinctrl.txt @@ -431,6 +443,8 @@ sysrq.txt - info on the magic SysRq key. target/ - directory with info on generating TCM v4 fabric .ko modules +this_cpu_ops.txt + - List rationale behind and the way to use this_cpu operations. thermal/ - directory with information on managing thermal issues (CPU/temp) trace/ @@ -469,6 +483,8 @@ wimax/ - directory with info about Intel Wireless Wimax Connections workqueue.txt - information on the Concurrency Managed Workqueue implementation +ww-mutex-design.txt + - Intro to Mutex wait/would deadlock handling.s x86/x86_64/ - directory with info on Linux support for AMD x86-64 (Hammer) machines. xtensa/ diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index a8d01005f480..10a93696e55a 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -82,7 +82,19 @@ Most of the hard work is done for the driver in the PCI layer. It simply has to request that the PCI layer set up the MSI capability for this device. -4.2.1 pci_enable_msi_range +4.2.1 pci_enable_msi + +int pci_enable_msi(struct pci_dev *dev) + +A successful call allocates ONE interrupt to the device, regardless +of how many MSIs the device supports. The device is switched from +pin-based interrupt mode to MSI mode. The dev->irq number is changed +to a new number which represents the message signaled interrupt; +consequently, this function should be called before the driver calls +request_irq(), because an MSI is delivered via a vector that is +different from the vector of a pin-based interrupt. + +4.2.2 pci_enable_msi_range int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) @@ -147,6 +159,11 @@ static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) return pci_enable_msi_range(pdev, nvec, nvec); } +Note, unlike pci_enable_msi_exact() function, which could be also used to +enable a particular number of MSI-X interrupts, pci_enable_msi_range() +returns either a negative errno or 'nvec' (not negative errno or 0 - as +pci_enable_msi_exact() does). + 4.2.1.3 Single MSI mode The most notorious example of the request type described above is @@ -158,7 +175,27 @@ static int foo_driver_enable_single_msi(struct pci_dev *pdev) return pci_enable_msi_range(pdev, 1, 1); } -4.2.2 pci_disable_msi +Note, unlike pci_enable_msi() function, which could be also used to +enable the single MSI mode, pci_enable_msi_range() returns either a +negative errno or 1 (not negative errno or 0 - as pci_enable_msi() +does). + +4.2.3 pci_enable_msi_exact + +int pci_enable_msi_exact(struct pci_dev *dev, int nvec) + +This variation on pci_enable_msi_range() call allows a device driver to +request exactly 'nvec' MSIs. + +If this function returns a negative number, it indicates an error and +the driver should not attempt to request any more MSI interrupts for +this device. + +By contrast with pci_enable_msi_range() function, pci_enable_msi_exact() +returns zero in case of success, which indicates MSI interrupts have been +successfully allocated. + +4.2.4 pci_disable_msi void pci_disable_msi(struct pci_dev *dev) @@ -172,7 +209,7 @@ on any interrupt for which it previously called request_irq(). Failure to do so results in a BUG_ON(), leaving the device with MSI enabled and thus leaking its vector. -4.2.3 pci_msi_vec_count +4.2.4 pci_msi_vec_count int pci_msi_vec_count(struct pci_dev *dev) @@ -257,8 +294,8 @@ possible, likely up to the limit returned by pci_msix_vec_count() function: static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) { - return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, - 1, nvec); + return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, + 1, nvec); } Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive, @@ -269,8 +306,8 @@ In this case the function could look like this: static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) { - return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, - FOO_DRIVER_MINIMUM_NVEC, nvec); + return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, + FOO_DRIVER_MINIMUM_NVEC, nvec); } 4.3.1.2 Exact number of MSI-X interrupts @@ -282,10 +319,15 @@ parameters: static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) { - return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, - nvec, nvec); + return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, + nvec, nvec); } +Note, unlike pci_enable_msix_exact() function, which could be also used to +enable a particular number of MSI-X interrupts, pci_enable_msix_range() +returns either a negative errno or 'nvec' (not negative errno or 0 - as +pci_enable_msix_exact() does). + 4.3.1.3 Specific requirements to the number of MSI-X interrupts As noted above, there could be devices that can not operate with just any @@ -332,7 +374,64 @@ Note how pci_enable_msix_range() return value is analized for a fallback - any error code other than -ENOSPC indicates a fatal error and should not be retried. -4.3.2 pci_disable_msix +4.3.2 pci_enable_msix_exact + +int pci_enable_msix_exact(struct pci_dev *dev, + struct msix_entry *entries, int nvec) + +This variation on pci_enable_msix_range() call allows a device driver to +request exactly 'nvec' MSI-Xs. + +If this function returns a negative number, it indicates an error and +the driver should not attempt to allocate any more MSI-X interrupts for +this device. + +By contrast with pci_enable_msix_range() function, pci_enable_msix_exact() +returns zero in case of success, which indicates MSI-X interrupts have been +successfully allocated. + +Another version of a routine that enables MSI-X mode for a device with +specific requirements described in chapter 4.3.1.3 might look like this: + +/* + * Assume 'minvec' and 'maxvec' are non-zero + */ +static int foo_driver_enable_msix(struct foo_adapter *adapter, + int minvec, int maxvec) +{ + int rc; + + minvec = roundup_pow_of_two(minvec); + maxvec = rounddown_pow_of_two(maxvec); + + if (minvec > maxvec) + return -ERANGE; + +retry: + rc = pci_enable_msix_exact(adapter->pdev, + adapter->msix_entries, maxvec); + + /* + * -ENOSPC is the only error code allowed to be analyzed + */ + if (rc == -ENOSPC) { + if (maxvec == 1) + return -ENOSPC; + + maxvec /= 2; + + if (minvec > maxvec) + return -ENOSPC; + + goto retry; + } else if (rc < 0) { + return rc; + } + + return maxvec; +} + +4.3.3 pci_disable_msix void pci_disable_msix(struct pci_dev *dev) diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX index 1d7a885761f5..fa57139f50bf 100644 --- a/Documentation/RCU/00-INDEX +++ b/Documentation/RCU/00-INDEX @@ -8,6 +8,8 @@ listRCU.txt - Using RCU to Protect Read-Mostly Linked Lists lockdep.txt - RCU and lockdep checking +lockdep-splat.txt + - RCU Lockdep splats explained. NMI-RCU.txt - Using RCU to Protect Dynamic NMI Handlers rcubarrier.txt diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 36420e116c90..a94090cc785d 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -4,6 +4,8 @@ Booting - requirements for booting Interrupts - ARM Interrupt subsystem documentation +IXP4xx + - Intel IXP4xx Network processor. msm - MSM specific documentation Netwinder @@ -24,8 +26,16 @@ SPEAr - ST SPEAr platform Linux Overview VFP/ - Release notes for Linux Kernel Vector Floating Point support code +cluster-pm-race-avoidance.txt + - Algorithm for CPU and Cluster setup/teardown empeg/ - Ltd's Empeg MP3 Car Audio Player +firmware.txt + - Secure firmware registration and calling. +kernel_mode_neon.txt + - How to use NEON instructions in kernel mode +kernel_user_helpers.txt + - Helper functions in kernel space made available for userspace. mem_alignment - alignment abort handler documentation memory.txt @@ -34,3 +44,7 @@ nwfpe/ - NWFPE floating point emulator documentation swp_emulation - SWP/SWPB emulation handler/logging description +tcm.txt + - ARM Tightly Coupled Memory +vlocks.txt + - Voting locks, low-level mechanism relying on memory system atomic writes. diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX index 2df0365f2dff..c54fcdd4ae9f 100644 --- a/Documentation/blackfin/00-INDEX +++ b/Documentation/blackfin/00-INDEX @@ -1,8 +1,10 @@ 00-INDEX - This file - +Makefile + - Makefile for gptimers example file. bfin-gpio-notes.txt - Notes in developing/using bfin-gpio driver. - bfin-spi-notes.txt - Notes for using bfin spi bus driver. +gptimers-example.c + - gptimers example diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index 929d9904f74b..e840b47613f7 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -14,6 +14,8 @@ deadline-iosched.txt - Deadline IO scheduler tunables ioprio.txt - Block io priorities (in CFQ scheduler) +null_blk.txt + - Null block for block-layer benchmarking. queue-sysfs.txt - Queue's sysfs entries request.txt diff --git a/Documentation/devicetree/00-INDEX b/Documentation/devicetree/00-INDEX index b78f691fd847..8c4102c6a5e7 100644 --- a/Documentation/devicetree/00-INDEX +++ b/Documentation/devicetree/00-INDEX @@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss - this file booting-without-of.txt - Booting Linux without Open Firmware, describes history and format of device trees. +usage-model.txt + - How Linux uses DT and what DT aims to solve.
\ No newline at end of file diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 34dc40cffdfd..af9b4a0d902b 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -91,7 +91,7 @@ Boards: compatible = "ti,omap3-beagle", "ti,omap3" - OMAP3 Tobi with Overo : Commercial expansion board with daughter board - compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3" - OMAP4 SDP : Software Development Board compatible = "ti,omap4-sdp", "ti,omap4430" diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 68b83ecc3850..ee9be9961524 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -1,12 +1,16 @@ * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX Required properties: -- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma", - "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma", - "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or - "fsl,imx6q-sdma". The -to variants should be preferred since they - allow to determnine the correct ROM script addresses needed for - the driver to work without additional firmware. +- compatible : Should be one of + "fsl,imx25-sdma" + "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma" + "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma" + "fsl,imx51-sdma" + "fsl,imx53-sdma" + "fsl,imx6q-sdma" + The -to variants should be preferred since they allow to determnine the + correct ROM script addresses needed for the driver to work without additional + firmware. - reg : Should contain SDMA registers location and length - interrupts : Should contain SDMA interrupt - #dma-cells : Must be <3>. diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt new file mode 100644 index 000000000000..aee38e7c13e7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt @@ -0,0 +1,18 @@ +TI-NSPIRE interrupt controller + +Required properties: +- compatible: Compatible property value should be "lsi,zevio-intc". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +Example: + +interrupt-controller { + compatible = "lsi,zevio-intc"; + interrupt-controller; + reg = <0xDC000000 0x1000>; + #interrupt-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt index 0a85c70cd30a..07ad02075a93 100644 --- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt +++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt @@ -13,6 +13,9 @@ Required properties: - #address-cells: should be one. The cell is the slot id. - #size-cells: should be zero. - at least one slot node +- clock-names: tuple listing input clock names. + Required elements: "mci_clk" +- clocks: phandles to input clocks. The node contains child nodes for each slot that the platform uses @@ -24,6 +27,8 @@ mmc0: mmc@f0008000 { interrupts = <12 4>; #address-cells = <1>; #size-cells = <0>; + clock-names = "mci_clk"; + clocks = <&mci0_clk>; [ child node definitions...] }; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt index b90bfcd138ff..863d5b8155c7 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt @@ -1,7 +1,8 @@ * Allwinner EMAC ethernet controller Required properties: -- compatible: should be "allwinner,sun4i-emac". +- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated: + "allwinner,sun4i-emac") - reg: address and length of the register set for the device. - interrupts: interrupt for the device - phy: A phandle to a phy node defining the PHY address (as the reg @@ -14,7 +15,7 @@ Optional properties: Example: emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; + compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt index 00b9f9a3ec1d..4ec56413779d 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt @@ -1,7 +1,8 @@ * Allwinner A10 MDIO Ethernet Controller interface Required properties: -- compatible: should be "allwinner,sun4i-mdio". +- compatible: should be "allwinner,sun4i-a10-mdio" + (Deprecated: "allwinner,sun4i-mdio"). - reg: address and length of the register set for the device. Optional properties: @@ -9,7 +10,7 @@ Optional properties: Example at the SoC level: mdio@01c0b080 { - compatible = "allwinner,sun4i-mdio"; + compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt new file mode 100644 index 000000000000..3dd3d0bf112f --- /dev/null +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -0,0 +1,58 @@ +STMicroelectronics SoC DWMAC glue layer controller + +The device node has following properties. + +Required properties: + - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac" or + "st,stid127-dwmac". + - reg : Offset of the glue configuration register map in system + configuration regmap pointed by st,syscon property and size. + + - reg-names : Should be "sti-ethconf". + + - st,syscon : Should be phandle to system configuration node which + encompases this glue registers. + + - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be + wired up in from different sources. One via TXCLK pin and other via CLK_125 + pin. This wiring is totally board dependent. However the retiming glue + logic should be configured accordingly. Possible values for this property + + "txclk" - if 125Mhz clock is wired up via txclk line. + "clk_125" - if 125Mhz clock is wired up via clk_125 line. + + This property is only valid for Giga bit setup( GMII, RGMII), and it is + un-used for non-giga bit (MII and RMII) setups. Also note that internal + clockgen can not generate stable 125Mhz clock. + + - st,ext-phyclk: This boolean property indicates who is generating the clock + for tx and rx. This property is only valid for RMII case where the clock can + be generated from the MAC or PHY. + + - clock-names: should be "sti-ethclk". + - clocks: Should point to ethernet clockgen which can generate phyclk. + + +Example: + +ethernet0: dwmac@fe810000 { + device_type = "network"; + compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; + reg = <0xfe810000 0x8000>, <0x8bc 0x4>; + reg-names = "stmmaceth", "sti-ethconf"; + interrupts = <0 133 0>, <0 134 0>, <0 135 0>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + phy-mode = "mii"; + + st,syscon = <&syscfg_rear>; + + snps,pbl = <32>; + snps,mixed-burst; + + resets = <&softreset STIH416_ETH0_SOFTRESET>; + reset-names = "stmmaceth"; + pinctrl-0 = <&pinctrl_mii0>; + pinctrl-names = "default"; + clocks = <&CLK_S_GMAC0_PHY>; + clock-names = "stmmaceth"; +}; diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/bq2415x.txt new file mode 100644 index 000000000000..d0327f0b59ad --- /dev/null +++ b/Documentation/devicetree/bindings/power/bq2415x.txt @@ -0,0 +1,47 @@ +Binding for TI bq2415x Li-Ion Charger + +Required properties: +- compatible: Should contain one of the following: + * "ti,bq24150" + * "ti,bq24150" + * "ti,bq24150a" + * "ti,bq24151" + * "ti,bq24151a" + * "ti,bq24152" + * "ti,bq24153" + * "ti,bq24153a" + * "ti,bq24155" + * "ti,bq24156" + * "ti,bq24156a" + * "ti,bq24158" +- reg: integer, i2c address of the device. +- ti,current-limit: integer, initial maximum current charger can pull + from power supply in mA. +- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV. + The chip will use slow precharge if battery voltage + is below this value. +- ti,battery-regulation-voltage: integer, maximum charging voltage in mV. +- ti,charge-current: integer, maximum charging current in mA. +- ti,termination-current: integer, charge will be terminated when current in + constant-voltage phase drops below this value (in mA). +- ti,resistor-sense: integer, value of sensing resistor in milliohm. + +Optional properties: +- ti,usb-charger-detection: phandle to usb charger detection device. + (required for auto mode) + +Example from Nokia N900: + +bq24150a { + compatible = "ti,bq24150a"; + reg = <0x6b>; + + ti,current-limit = <100>; + ti,weak-battery-voltage = <3400>; + ti,battery-regulation-voltage = <4200>; + ti,charge-current = <650>; + ti,termination-current = <100>; + ti,resistor-sense = <68>; + + ti,usb-charger-detection = <&isp1704>; +}; diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt index 07e04cdc0c9e..4f8184d069cb 100644 --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt @@ -5,6 +5,9 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain spi interrupt - cs-gpios: chipselects +- clock-names: tuple listing input clock names. + Required elements: "spi_clk" +- clocks: phandles to input clocks. Example: @@ -14,6 +17,8 @@ spi1: spi@fffcc000 { interrupts = <13 4 5>; #address-cells = <1>; #size-cells = <0>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; cs-gpios = <&pioB 3 0>; status = "okay"; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 3f900cd51bf0..40ce2df0e0e9 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -8,6 +8,7 @@ ad Avionic Design GmbH adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. +allwinner Allwinner Technology Co., Ltd. altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amstaos AMS-Taos Inc. @@ -40,6 +41,7 @@ gmt Global Mixed-mode Technology, Inc. gumstix Gumstix, Inc. haoyu Haoyu Microelectronic Co. Ltd. hisilicon Hisilicon Limited. +honeywell Honeywell hp Hewlett Packard ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. @@ -55,6 +57,7 @@ maxim Maxim Integrated Products microchip Microchip Technology Inc. mosaixtech Mosaix Technologies, Inc. national National Semiconductor +neonode Neonode Inc. nintendo Nintendo nvidia NVIDIA nxp NXP Semiconductors @@ -64,7 +67,7 @@ phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. -qcom Qualcomm, Inc. +qcom Qualcomm Technologies, Inc ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. @@ -78,6 +81,7 @@ silabs Silicon Laboratories simtek sirf SiRF Technology, Inc. snps Synopsys, Inc. +spansion Spansion Inc. st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt index 47c30098dab6..731a009723c7 100644 --- a/Documentation/dvb/contributors.txt +++ b/Documentation/dvb/contributors.txt @@ -78,7 +78,7 @@ Peter Beutner <p.beutner@gmx.net> Wilson Michaels <wilsonmichaels@earthlink.net> for the lgdt330x frontend driver, and various bugfixes -Michael Krufky <mkrufky@m1k.net> +Michael Krufky <mkrufky@linuxtv.org> for maintaining v4l/dvb inter-tree dependencies Taylor Jacob <rtjacob@earthlink.net> diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX index 30a70542e823..fe85e7c5907a 100644 --- a/Documentation/fb/00-INDEX +++ b/Documentation/fb/00-INDEX @@ -5,6 +5,8 @@ please mail me. 00-INDEX - this file. +api.txt + - The frame buffer API between applications and buffer devices. arkfb.txt - info on the fbdev driver for ARK Logic chips. aty128fb.txt @@ -51,12 +53,16 @@ sh7760fb.txt - info on the SH7760/SH7763 integrated LCDC Framebuffer driver. sisfb.txt - info on the framebuffer device driver for various SiS chips. +sm501.txt + - info on the framebuffer device driver for sm501 videoframebuffer. sstfb.txt - info on the frame buffer driver for 3dfx' Voodoo Graphics boards. tgafb.txt - info on the TGA (DECChip 21030) frame buffer driver. tridentfb.txt info on the framebuffer driver for some Trident chip based cards. +udlfb.txt + - Driver for DisplayLink USB 2.0 chips. uvesafb.txt - info on the userspace VESA (VBE2+ compliant) frame buffer device. vesafb.txt diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 632211cbdd56..ac28149aede4 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -2,6 +2,8 @@ - this file (info on some of the filesystems supported by linux). Locking - info on locking rules as they pertain to Linux VFS. +Makefile + - Makefile for building the filsystems-part of DocBook. 9p.txt - 9p (v9fs) is an implementation of the Plan 9 remote fs protocol. adfs.txt diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX index 66eb6c8c5334..53f3b596ac0d 100644 --- a/Documentation/filesystems/nfs/00-INDEX +++ b/Documentation/filesystems/nfs/00-INDEX @@ -12,6 +12,8 @@ nfs41-server.txt - info on the Linux server implementation of NFSv4 minor version 1. nfs-rdma.txt - how to install and setup the Linux NFS/RDMA client and server software +nfsd-admin-interfaces.txt + - Administrative interfaces for nfsd. nfsroot.txt - short guide on setting up a diskless box with NFS root filesystem. pnfs.txt @@ -20,5 +22,5 @@ rpc-cache.txt - introduction to the caching mechanisms in the sunrpc layer. idmapper.txt - information for configuring request-keys to be used by idmapper -knfsd-rpcgss.txt +rpc-server-gss.txt - Information on GSS authentication support in the NFS Server diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices index c70e7a7638d1..0d85ac1935b7 100644 --- a/Documentation/i2c/instantiating-devices +++ b/Documentation/i2c/instantiating-devices @@ -8,8 +8,8 @@ reason, the kernel code must instantiate I2C devices explicitly. There are several ways to achieve this, depending on the context and requirements. -Method 1: Declare the I2C devices by bus number ------------------------------------------------ +Method 1a: Declare the I2C devices by bus number +------------------------------------------------ This method is appropriate when the I2C bus is a system bus as is the case for many embedded systems. On such systems, each I2C bus has a number @@ -51,6 +51,43 @@ The devices will be automatically unbound and destroyed when the I2C bus they sit on goes away (if ever.) +Method 1b: Declare the I2C devices via devicetree +------------------------------------------------- + +This method has the same implications as method 1a. The declaration of I2C +devices is here done via devicetree as subnodes of the master controller. + +Example: + + i2c1: i2c@400a0000 { + /* ... master properties skipped ... */ + clock-frequency = <100000>; + + flash@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + pca9532: gpio@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; + }; + +Here, two devices are attached to the bus using a speed of 100kHz. For +additional properties which might be needed to set up the device, please refer +to its devicetree documentation in Documentation/devicetree/bindings/. + + +Method 1c: Declare the I2C devices via ACPI +------------------------------------------- + +ACPI can also describe I2C devices. There is special documentation for this +which is currently located at Documentation/acpi/enumeration.txt. + + Method 2: Instantiate the devices explicitly -------------------------------------------- diff --git a/Documentation/ide/00-INDEX b/Documentation/ide/00-INDEX index d6b778842b75..22f98ca79539 100644 --- a/Documentation/ide/00-INDEX +++ b/Documentation/ide/00-INDEX @@ -10,3 +10,5 @@ ide-tape.txt - info on the IDE ATAPI streaming tape driver ide.txt - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS). +warm-plug-howto.txt + - using sysfs to remove and add IDE devices.
\ No newline at end of file diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8f441dab0396..7116fda7077f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1726,16 +1726,16 @@ bytes respectively. Such letter suffixes can also be entirely omitted. option description. memmap=nn[KMG]@ss[KMG] - [KNL] Force usage of a specific region of memory - Region of memory to be used, from ss to ss+nn. + [KNL] Force usage of a specific region of memory. + Region of memory to be used is from ss to ss+nn. memmap=nn[KMG]#ss[KMG] [KNL,ACPI] Mark specific memory as ACPI data. - Region of memory to be used, from ss to ss+nn. + Region of memory to be marked is from ss to ss+nn. memmap=nn[KMG]$ss[KMG] [KNL,ACPI] Mark specific memory as reserved. - Region of memory to be used, from ss to ss+nn. + Region of memory to be reserved is from ss to ss+nn. Example: Exclude memory from 0x18690000-0x1869ffff memmap=64K$0x18690000 or diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX index fa688538e757..d13b9a9a9e00 100644 --- a/Documentation/laptops/00-INDEX +++ b/Documentation/laptops/00-INDEX @@ -1,13 +1,15 @@ 00-INDEX - This file -acer-wmi.txt - - information on the Acer Laptop WMI Extras driver. +Makefile + - Makefile for building dslm example program. asus-laptop.txt - information on the Asus Laptop Extras driver. disk-shock-protection.txt - information on hard disk shock protection. dslm.c - Simple Disk Sleep Monitor program +hpfall.c + - (HP) laptop accelerometer program for disk protection. laptop-mode.txt - how to conserve battery power using laptop-mode. sony-laptop.txt diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX index 1ecd1596633e..b4ef1f34e25f 100644 --- a/Documentation/leds/00-INDEX +++ b/Documentation/leds/00-INDEX @@ -1,3 +1,7 @@ +00-INDEX + - This file +leds-blinkm.txt + - Driver for BlinkM LED-devices. leds-class.txt - documents LED handling under Linux. leds-lp3944.txt @@ -12,3 +16,7 @@ leds-lp55xx.txt - description about lp55xx common driver. leds-lm3556.txt - notes on how to use the leds-lm3556 driver. +ledtrig-oneshot.txt + - One-shot LED trigger for both sporadic and dense events. +ledtrig-transient.txt + - LED Transient Trigger, one shot timer activation. diff --git a/Documentation/m68k/00-INDEX b/Documentation/m68k/00-INDEX index a014e9f00765..2be8c6b00e74 100644 --- a/Documentation/m68k/00-INDEX +++ b/Documentation/m68k/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file +README.buddha + - Amiga Buddha and Catweasel IDE Driver kernel-options.txt - command line options for Linux/m68k diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index f11580f8719a..557b6ef70c26 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -6,8 +6,14 @@ - information on the 3Com Etherlink III Series Ethernet cards. 6pack.txt - info on the 6pack protocol, an alternative to KISS for AX.25 -DLINK.txt - - info on the D-Link DE-600/DE-620 parallel port pocket adapters +LICENSE.qla3xxx + - GPLv2 for QLogic Linux Networking HBA Driver +LICENSE.qlge + - GPLv2 for QLogic Linux qlge NIC Driver +LICENSE.qlcnic + - GPLv2 for QLogic Linux qlcnic NIC Driver +Makefile + - Makefile for docsrc. PLIP.txt - PLIP: The Parallel Line Internet Protocol device driver README.ipw2100 @@ -17,7 +23,7 @@ README.ipw2200 README.sb1000 - info on General Instrument/NextLevel SURFboard1000 cable modem. alias.txt - - info on using alias network devices + - info on using alias network devices. arcnet-hardware.txt - tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc. arcnet.txt @@ -80,7 +86,7 @@ framerelay.txt - info on using Frame Relay/Data Link Connection Identifier (DLCI). gen_stats.txt - Generic networking statistics for netlink users. -generic_hdlc.txt +generic-hdlc.txt - The generic High Level Data Link Control (HDLC) layer. generic_netlink.txt - info on Generic Netlink @@ -88,6 +94,8 @@ gianfar.txt - Gianfar Ethernet Driver. i40e.txt - README for the Intel Ethernet Controller XL710 Driver (i40e). +i40evf.txt + - Short note on the Driver for the Intel(R) XL710 X710 Virtual Function ieee802154.txt - Linux IEEE 802.15.4 implementation, API and drivers igb.txt @@ -102,6 +110,8 @@ ipddp.txt - AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation iphase.txt - Interphase PCI ATM (i)Chip IA Linux driver info. +ipsec.txt + - Note on not compressing IPSec payload and resulting failed policy check. ipv6.txt - Options to the ipv6 kernel module. ipvs-sysctl.txt @@ -120,6 +130,8 @@ lapb-module.txt - programming information of the LAPB module. ltpc.txt - the Apple or Farallon LocalTalk PC card driver +mac80211-auth-assoc-deauth.txt + - authentication and association / deauth-disassoc with max80211 mac80211-injection.txt - HOWTO use packet injection with mac80211 multiqueue.txt @@ -134,6 +146,10 @@ netdevices.txt - info on network device driver functions exported to the kernel. netif-msg.txt - Design of the network interface message level setting (NETIF_MSG_*). +netlink_mmap.txt + - memory mapped I/O with netlink +nf_conntrack-sysctl.txt + - list of netfilter-sysctl knobs. nfc.txt - The Linux Near Field Communication (NFS) subsystem. openvswitch.txt @@ -176,7 +192,7 @@ skfp.txt - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. smc9.txt - the driver for SMC's 9000 series of Ethernet cards -spider-net.txt +spider_net.txt - README for the Spidernet Driver (as found in PS3 / Cell BE). stmmac.txt - README for the STMicro Synopsys Ethernet driver. @@ -188,6 +204,8 @@ tcp.txt - short blurb on how TCP output takes place. tcp-thin.txt - kernel tuning options for low rate 'thin' TCP streams. +team.txt + - pointer to information for ethernet teaming devices. tlan.txt - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info. tproxy.txt @@ -200,6 +218,8 @@ vortex.txt - info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards. vxge.txt - README for the Neterion X3100 PCIe Server Adapter. +vxlan.txt + - Virtual extensible LAN overview x25.txt - general info on X.25 development. x25-iface.txt diff --git a/Documentation/networking/3c505.txt b/Documentation/networking/3c505.txt deleted file mode 100644 index 72f38b13101d..000000000000 --- a/Documentation/networking/3c505.txt +++ /dev/null @@ -1,45 +0,0 @@ -The 3Com Etherlink Plus (3c505) driver. - -This driver now uses DMA. There is currently no support for PIO operation. -The default DMA channel is 6; this is _not_ autoprobed, so you must -make sure you configure it correctly. If loading the driver as a -module, you can do this with "modprobe 3c505 dma=n". If the driver is -linked statically into the kernel, you must either use an "ether=" -statement on the command line, or change the definition of ELP_DMA in 3c505.h. - -The driver will warn you if it has to fall back on the compiled in -default DMA channel. - -If no base address is given at boot time, the driver will autoprobe -ports 0x300, 0x280 and 0x310 (in that order). If no IRQ is given, the driver -will try to probe for it. - -The driver can be used as a loadable module. - -Theoretically, one instance of the driver can now run multiple cards, -in the standard way (when loading a module, say "modprobe 3c505 -io=0x300,0x340 irq=10,11 dma=6,7" or whatever). I have not tested -this, though. - -The driver may now support revision 2 hardware; the dependency on -being able to read the host control register has been removed. This -is also untested, since I don't have a suitable card. - -Known problems: - I still see "DMA upload timed out" messages from time to time. These -seem to be fairly non-fatal though. - The card is old and slow. - -To do: - Improve probe/setup code - Test multicast and promiscuous operation - -Authors: - The driver is mainly written by Craig Southeren, email - <craigs@ineluki.apana.org.au>. - Parts of the driver (adapting the driver to 1.1.4+ kernels, - IRQ/address detection, some changes) and this README by - Juha Laiho <jlaiho@ichaos.nullnet.fi>. - DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk> - Multicard support, Software configurable DMA, etc., by - Christopher Collins <ccollins@pcug.org.au> diff --git a/Documentation/phy.txt b/Documentation/phy.txt index 0103e4b15b0e..ebff6ee52441 100644 --- a/Documentation/phy.txt +++ b/Documentation/phy.txt @@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to it. This framework provides the following APIs to get a reference to the PHY. struct phy *phy_get(struct device *dev, const char *string); +struct phy *phy_optional_get(struct device *dev, const char *string); struct phy *devm_phy_get(struct device *dev, const char *string); - -phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot, -the string arguments should contain the phy name as given in the dt data and -in the case of non-dt boot, it should contain the label of the PHY. -The only difference between the two APIs is that devm_phy_get associates the -device with the PHY using devres on successful PHY get. On driver detach, -release function is invoked on the the devres data and devres data is freed. +struct phy *devm_phy_optional_get(struct device *dev, const char *string); + +phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can +be used to get the PHY. In the case of dt boot, the string arguments +should contain the phy name as given in the dt data and in the case of +non-dt boot, it should contain the label of the PHY. The two +devm_phy_get associates the device with the PHY using devres on +successful PHY get. On driver detach, release function is invoked on +the the devres data and devres data is freed. phy_optional_get and +devm_phy_optional_get should be used when the phy is optional. These +two functions will never return -ENODEV, but instead returns NULL when +the phy cannot be found. + +It should be noted that NULL is a valid phy reference. All phy +consumer calls on the NULL phy become NOPs. That is the release calls, +the phy_init() and phy_exit() calls, and phy_power_on() and +phy_power_off() calls are all NOP when applied to a NULL phy. The NULL +phy is useful in devices for handling optional phy devices. 5. Releasing a reference to the PHY diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX index a4d682f54231..ad04cc8097ed 100644 --- a/Documentation/power/00-INDEX +++ b/Documentation/power/00-INDEX @@ -4,6 +4,8 @@ apm-acpi.txt - basic info about the APM and ACPI support. basic-pm-debugging.txt - Debugging suspend and resume +charger-manager.txt + - Battery charger management. devices.txt - How drivers interact with system-wide power management drivers-testing.txt @@ -22,6 +24,8 @@ pm_qos_interface.txt - info on Linux PM Quality of Service interface power_supply_class.txt - Tells userspace about battery, UPS, AC or DC power supply properties +runtime_pm.txt + - Power management framework for I/O devices. s2ram.txt - How to get suspend to ram working (and debug it when it isn't) states.txt @@ -38,7 +42,5 @@ tricks.txt - How to trick software suspend (to disk) into working when it isn't userland-swsusp.txt - Experimental implementation of software suspend in userspace -video_extension.txt - - ACPI video extensions video.txt - Video issues during resume from suspend diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c index a74d0a84d329..4aba0436da65 100644 --- a/Documentation/ptp/testptp.c +++ b/Documentation/ptp/testptp.c @@ -117,6 +117,7 @@ static void usage(char *progname) " -f val adjust the ptp clock frequency by 'val' ppb\n" " -g get the ptp clock time\n" " -h prints this message\n" + " -i val index for event/trigger\n" " -k val measure the time offset between system and phc clock\n" " for 'val' times (Maximum 25)\n" " -p val enable output with a period of 'val' nanoseconds\n" @@ -154,6 +155,7 @@ int main(int argc, char *argv[]) int capabilities = 0; int extts = 0; int gettime = 0; + int index = 0; int oneshot = 0; int pct_offset = 0; int n_samples = 0; @@ -167,7 +169,7 @@ int main(int argc, char *argv[]) progname = strrchr(argv[0], '/'); progname = progname ? 1+progname : argv[0]; - while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) { + while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) { switch (c) { case 'a': oneshot = atoi(optarg); @@ -190,6 +192,9 @@ int main(int argc, char *argv[]) case 'g': gettime = 1; break; + case 'i': + index = atoi(optarg); + break; case 'k': pct_offset = 1; n_samples = atoi(optarg); @@ -301,7 +306,7 @@ int main(int argc, char *argv[]) if (extts) { memset(&extts_request, 0, sizeof(extts_request)); - extts_request.index = 0; + extts_request.index = index; extts_request.flags = PTP_ENABLE_FEATURE; if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) { perror("PTP_EXTTS_REQUEST"); @@ -375,7 +380,7 @@ int main(int argc, char *argv[]) return -1; } memset(&perout_request, 0, sizeof(perout_request)); - perout_request.index = 0; + perout_request.index = index; perout_request.start.sec = ts.tv_sec + 2; perout_request.start.nsec = 0; perout_request.period.sec = 0; diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX index 3a2b96302ecc..10c874ebdfe5 100644 --- a/Documentation/s390/00-INDEX +++ b/Documentation/s390/00-INDEX @@ -16,11 +16,13 @@ Debugging390.txt - hints for debugging on s390 systems. driver-model.txt - information on s390 devices and the driver model. +kvm.txt + - ioctl calls to /dev/kvm on s390. monreader.txt - information on accessing the z/VM monitor stream from Linux. +qeth.txt + - HiperSockets Bridge Port Support. s390dbf.txt - information on using the s390 debug feature. -TAPE - - information on the driver for channel-attached tapes. -zfcpdump +zfcpdump.txt - information on the s390 SCSI dump tool. diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX index 46702e4f89c9..eccf7ad2e7f9 100644 --- a/Documentation/scheduler/00-INDEX +++ b/Documentation/scheduler/00-INDEX @@ -2,6 +2,8 @@ - this file. sched-arch.txt - CPU Scheduler implementation hints for architecture specific code. +sched-bwc.txt + - CFS bandwidth control overview. sched-design-CFS.txt - goals, design and implementation of the Completely Fair Scheduler. sched-domains.txt diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index 2044be565d93..c4b978a72f78 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -36,6 +36,8 @@ NinjaSCSI.txt - info on WorkBiT NinjaSCSI-32/32Bi driver aacraid.txt - Driver supporting Adaptec RAID controllers +advansys.txt + - List of Advansys Host Adapters aha152x.txt - info on driver for Adaptec AHA152x based adapters aic79xx.txt @@ -44,6 +46,12 @@ aic7xxx.txt - info on driver for Adaptec controllers arcmsr_spec.txt - ARECA FIRMWARE SPEC (for IOP331 adapter) +bfa.txt + - Brocade FC/FCOE adapter driver. +bnx2fc.txt + - FCoE hardware offload for Broadcom network interfaces. +cxgb3i.txt + - Chelsio iSCSI Linux Driver dc395x.txt - README file for the dc395x SCSI driver dpti.txt @@ -52,18 +60,24 @@ dtc3x80.txt - info on driver for DTC 2x80 based adapters g_NCR5380.txt - info on driver for NCR5380 and NCR53c400 based adapters +hpsa.txt + - HP Smart Array Controller SCSI driver. hptiop.txt - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER in2000.txt - info on in2000 driver libsas.txt - Serial Attached SCSI management layer. +link_power_management_policy.txt + - Link power management options. lpfc.txt - LPFC driver release notes megaraid.txt - Common Management Module, shared code handling ioctls for LSI drivers ncr53c8xx.txt - info on driver for NCR53c8xx based adapters +osd.txt + Object-Based Storage Device, command set introduction. osst.txt - info on driver for OnStream SC-x0 SCSI tape ppa.txt @@ -74,6 +88,8 @@ scsi-changer.txt - README for the SCSI media changer driver scsi-generic.txt - info on the sg driver for generic (non-disk/CD/tape) SCSI devices. +scsi-parameters.txt + - List of SCSI-parameters to pass to the kernel at module load-time. scsi.txt - short blurb on using SCSI support as a module. scsi_mid_low_api.txt diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX index 1f1b22fbd739..f9c6b5ed03e7 100644 --- a/Documentation/serial/00-INDEX +++ b/Documentation/serial/00-INDEX @@ -4,10 +4,12 @@ README.cycladesZ - info on Cyclades-Z firmware loading. digiepca.txt - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. -hayes-esp.txt - - info on using the Hayes ESP serial driver. +driver + - intro to the low level serial driver. moxa-smartio - file with info on installing/using Moxa multiport serial driver. +n_gsm.txt + - GSM 0710 tty multiplexer howto. riscom8.txt - notes on using the RISCom/8 multi-port serial driver. rocket.txt diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX new file mode 100644 index 000000000000..a128fa835512 --- /dev/null +++ b/Documentation/spi/00-INDEX @@ -0,0 +1,22 @@ +00-INDEX + - this file. +Makefile + - Makefile for the example sourcefiles. +butterfly + - AVR Butterfly SPI driver overview and pin configuration. +ep93xx_spi + - Basic EP93xx SPI driver configuration. +pxa2xx + - PXA2xx SPI master controller build by spi_message fifo wq +spidev + - Intro to the userspace API for spi devices +spidev_fdx.c + - spidev example file +spi-lm70llp + - Connecting an LM70-LLP sensor to the kernel via the SPI subsys. +spi-sc18is602 + - NXP SC18IS602/603 I2C-bus to SPI bridge +spi-summary + - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here. +spidev_test.c + - SPI testing utility. diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index f72e0d1e0da8..7982bcc4d151 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -543,7 +543,22 @@ SPI MASTER METHODS queuing transfers that arrive in the meantime. When the driver is finished with this message, it must call spi_finalize_current_message() so the subsystem can issue the next - transfer. This may sleep. + message. This may sleep. + + master->transfer_one(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *transfer) + The subsystem calls the driver to transfer a single transfer while + queuing transfers that arrive in the meantime. When the driver is + finished with this transfer, it must call + spi_finalize_current_transfer() so the subsystem can issue the next + transfer. This may sleep. Note: transfer_one and transfer_one_message + are mutually exclusive; when both are set, the generic subsystem does + not call your transfer_one callback. + + Return values: + negative errno: error + 0: transfer is finished + 1: transfer is still in progress DEPRECATED METHODS diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX index ef2ccbf77fa2..6d042dc1cce0 100644 --- a/Documentation/timers/00-INDEX +++ b/Documentation/timers/00-INDEX @@ -8,6 +8,8 @@ hpet_example.c - sample hpet timer test program hrtimers.txt - subsystem for high-resolution kernel timers +Makefile + - Build and link hpet_example NO_HZ.txt - Summary of the different methods for the scheduler clock-interrupts management. timers-howto.txt diff --git a/Documentation/virtual/kvm/00-INDEX b/Documentation/virtual/kvm/00-INDEX index 641ec9220179..fee9f2bf9c64 100644 --- a/Documentation/virtual/kvm/00-INDEX +++ b/Documentation/virtual/kvm/00-INDEX @@ -20,5 +20,7 @@ ppc-pv.txt - the paravirtualization interface on PowerPC. review-checklist.txt - review checklist for KVM patches. +s390-diag.txt + - Diagnose hypercall description (for IBM S/390) timekeeping.txt - timekeeping virtualization for x86-based architectures. diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX index a39d06680e1c..081c49777abb 100644 --- a/Documentation/vm/00-INDEX +++ b/Documentation/vm/00-INDEX @@ -16,8 +16,6 @@ hwpoison.txt - explains what hwpoison is ksm.txt - how to use the Kernel Samepage Merging feature. -locking - - info on how locking and synchronization is done in the Linux vm code. numa - information about NUMA specific code in the Linux vm. numa_memory_policy.txt @@ -32,6 +30,8 @@ slub.txt - a short users guide for SLUB. soft-dirty.txt - short explanation for soft-dirty PTEs +split_page_table_lock + - Separate per-table lock to improve scalability of the old page_table_lock. transhuge.txt - Transparent Hugepage Support, alternative way of using hugepages. unevictable-lru.txt diff --git a/Documentation/w1/masters/00-INDEX b/Documentation/w1/masters/00-INDEX index d63fa024ac05..8330cf9325f0 100644 --- a/Documentation/w1/masters/00-INDEX +++ b/Documentation/w1/masters/00-INDEX @@ -4,7 +4,9 @@ ds2482 - The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses. ds2490 - The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges. -mxc_w1 +mxc-w1 - W1 master controller driver found on Freescale MX2/MX3 SoCs +omap-hdq + - HDQ/1-wire module of TI OMAP 2430/3430. w1-gpio - GPIO 1-wire bus master driver. diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX index 75613c9ac4db..6e18c70c3474 100644 --- a/Documentation/w1/slaves/00-INDEX +++ b/Documentation/w1/slaves/00-INDEX @@ -4,3 +4,5 @@ w1_therm - The Maxim/Dallas Semiconductor ds18*20 temperature sensor. w1_ds2423 - The Maxim/Dallas Semiconductor ds2423 counter device. +w1_ds28e04 + - The Maxim/Dallas Semiconductor ds28e04 eeprom. diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX index f37b46d34861..692264456f0f 100644 --- a/Documentation/x86/00-INDEX +++ b/Documentation/x86/00-INDEX @@ -1,6 +1,20 @@ 00-INDEX - this file -mtrr.txt - - how to use x86 Memory Type Range Registers to increase performance +boot.txt + - List of boot protocol versions +early-microcode.txt + - How to load microcode from an initrd-CPIO archive early to fix CPU issues. +earlyprintk.txt + - Using earlyprintk with a USB2 debug port key. +entry_64.txt + - Describe (some of the) kernel entry points for x86. exception-tables.txt - why and how Linux kernel uses exception tables on x86 +mtrr.txt + - how to use x86 Memory Type Range Registers to increase performance +pat.txt + - Page Attribute Table intro and API +usb-legacy-support.txt + - how to fix/avoid quirks when using emulated PS/2 mouse/keyboard. +zero-page.txt + - layout of the first page of memory. diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt index 28fa325b7461..6f6d956ac1c9 100644 --- a/Documentation/zh_CN/arm64/booting.txt +++ b/Documentation/zh_CN/arm64/booting.txt @@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated or if there is a problem with the translation. Maintainer: Will Deacon <will.deacon@arm.com> -Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> +Chinese maintainer: Fu Wei <wefu@redhat.com> --------------------------------------------------------------------- Documentation/arm64/booting.txt 的中文翻译 @@ -16,9 +16,9 @@ Documentation/arm64/booting.txt 的中文翻译 译存在问题，请联系中文版维护者。 英文版维护者： Will Deacon <will.deacon@arm.com> -中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> +中文版维护者： 傅炜 Fu Wei <wefu@redhat.com> +中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com> +中文版校译者： 傅炜 Fu Wei <wefu@redhat.com> 以下为正文 --------------------------------------------------------------------- @@ -64,8 +64,8 @@ RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何 必要性: 强制 -设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个 -512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来 +设备树数据块（dtb）必须 8 字节对齐，并位于从内核映像起始算起第一个 512MB +内，且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来 映射此数据块。 @@ -84,13 +84,23 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 必要性: 强制 -已解压的内核映像包含一个 32 字节的头，内容如下： +已解压的内核映像包含一个 64 字节的头，内容如下： - u32 magic = 0x14000008; /* 跳转到 stext, 小端 */ - u32 res0 = 0; /* 保留 */ + u32 code0; /* 可执行代码 */ + u32 code1; /* 可执行代码 */ u64 text_offset; /* 映像装载偏移 */ + u64 res0 = 0; /* 保留 */ u64 res1 = 0; /* 保留 */ u64 res2 = 0; /* 保留 */ + u64 res3 = 0; /* 保留 */ + u64 res4 = 0; /* 保留 */ + u32 magic = 0x644d5241; /* 魔数, 小端, "ARM\x64" */ + u32 res5 = 0; /* 保留 */ + + +映像头注释： + +- code0/code1 负责跳转到 stext. 映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM 的起始地址必须是以 2MB 对齐的。 @@ -118,9 +128,9 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 外部高速缓存（如果存在）必须配置并禁用。 - 架构计时器 - CNTFRQ 必须设定为计时器的频率。 - 如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0) - 必须置位。 + CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU + 都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 + EL1PCTEN (bit 0) 必须置位。 - 一致性 通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。 @@ -131,23 +141,40 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内 在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件 在一个更高的异常级别下初始化，以防止在 未知 状态下运行。 +以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的 +必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。 + 引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口： - 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树 - 数据块必须在每个 CPU 节点中包含以下内容： - - 1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。 - - 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。 + 数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所 + 支持的 enable-method 请见下文。 引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入 数据块。 -- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递 +- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU + 节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个 + 64 位自然对齐且初始化为零的内存位置。 + + 这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递 给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须 包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将 发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值 - 时，CPU 必须直接跳入此值所指向的地址。 + 时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值， + 因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。 + +- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在 + memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/ + 域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号 + ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的 + CPU_ON 调用来将 CPU 带入内核。 + + *译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。 + + 设备树必须包含一个 ‘psci’ 节点，请参考以下文档： + Documentation/devicetree/bindings/arm/psci.txt + - 辅助 CPU 通用寄存器设置 x0 = 0 (保留，将来可能使用) diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt index a5f6283829f9..a782704c1cb5 100644 --- a/Documentation/zh_CN/arm64/memory.txt +++ b/Documentation/zh_CN/arm64/memory.txt @@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated or if there is a problem with the translation. Maintainer: Catalin Marinas <catalin.marinas@arm.com> -Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> +Chinese maintainer: Fu Wei <wefu@redhat.com> --------------------------------------------------------------------- Documentation/arm64/memory.txt 的中文翻译 @@ -16,9 +16,9 @@ Documentation/arm64/memory.txt 的中文翻译 译存在问题，请联系中文版维护者。 英文版维护者： Catalin Marinas <catalin.marinas@arm.com> -中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> -中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com> +中文版维护者： 傅炜 Fu Wei <wefu@redhat.com> +中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com> +中文版校译者： 傅炜 Fu Wei <wefu@redhat.com> 以下为正文 --------------------------------------------------------------------- @@ -41,7 +41,7 @@ AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和 TTBR1 中，且从不写入 TTBR0。 -AArch64 Linux 内存布局： +AArch64 Linux 在页大小为 4KB 时的内存布局： 起始地址 结束地址 大小 用途 ----------------------------------------------------------------------- @@ -55,15 +55,42 @@ ffffffbc00000000 ffffffbdffffffff 8GB vmemmap ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页，未来用于 vmmemap] +ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk 设备 + ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间 -ffffffbbffff0000 ffffffbcffffffff ~2MB [防护页] +ffffffbffbe10000 ffffffbcffffffff ~2MB [防护页] ffffffbffc000000 ffffffbfffffffff 64MB 模块 ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射 +AArch64 Linux 在页大小为 64KB 时的内存布局： + +起始地址 结束地址 大小 用途 +----------------------------------------------------------------------- +0000000000000000 000003ffffffffff 4TB 用户空间 + +fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc + +fffffdfbffff0000 fffffdfbffffffff 64KB [防护页] + +fffffdfc00000000 fffffdfdffffffff 8GB vmemmap + +fffffdfe00000000 fffffdfffbbfffff ~8GB [防护页，未来用于 vmmemap] + +fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk 设备 + +fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O 空间 + +fffffdfffbe10000 fffffdfffbffffff ~2MB [防护页] + +fffffdfffc000000 fffffdffffffffff 64MB 模块 + +fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射 + + 4KB 页大小的转换表查找： +--------+--------+--------+--------+--------+--------+--------+--------+ @@ -91,3 +118,10 @@ ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射 | | +--------------------------> [41:29] L2 索引 (仅使用 38:29 ) | +-------------------------------> [47:42] L1 索引 (未使用) +-------------------------------------------------> [63] TTBR0/1 + +当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的 +一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）: + +起始地址 结束地址 大小 用途 +----------------------------------------------------------------------- +0000004000000000 0000007fffffffff 256GB 在 HYP 中映射的内核对象 diff --git a/Documentation/zh_CN/arm64/tagged-pointers.txt b/Documentation/zh_CN/arm64/tagged-pointers.txt new file mode 100644 index 000000000000..2664d1bd5a1c --- /dev/null +++ b/Documentation/zh_CN/arm64/tagged-pointers.txt @@ -0,0 +1,52 @@ +Chinese translated version of Documentation/arm64/tagged-pointers.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Will Deacon <will.deacon@arm.com> +Chinese maintainer: Fu Wei <wefu@redhat.com> +--------------------------------------------------------------------- +Documentation/arm64/tagged-pointers.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 + +英文版维护者： Will Deacon <will.deacon@arm.com> +中文版维护者： 傅炜 Fu Wei <wefu@redhat.com> +中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com> +中文版校译者： 傅炜 Fu Wei <wefu@redhat.com> + +以下为正文 +--------------------------------------------------------------------- + Linux 在 AArch64 中带标记的虚拟地址 + ================================= + +作者: Will Deacon <will.deacon@arm.com> +日期: 2013 年 06 月 12 日 + +本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在 +AArch64 Linux 中的潜在用途。 + +内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间 +映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制 +让这些位可供应用程序自由使用，其注意事项如下： + + (1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。 + 这意味着任何携带用户空间虚拟地址的系统调用（syscall） + 参数 *必须* 在陷入内核前使它们的最高字节被清零。 + + (2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了 + 标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟 + 地址所携带的包含其内部域信息的标记。此规则的一个例外是 + 当信号是在调试观察点的异常处理程序中产生的，此时标记的 + 信息将被保存。 + + (3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址 + 的高字节，C 编译器很可能无法判断它们是不同的。 + +此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节 +将被设置成一个为 “55” 的扩展符。 |