drm/i915/perf: enable perf support on CNL

This adds new registers to the whitelist to configs emitted from userspace.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-6-lionel.g.landwerlin@intel.com

1 files changed, 40 insertions, 1 deletions

diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 802928c54f06..00be015e01df 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -208,6 +208,7 @@
 #include "i915_oa_glk.h"
 #include "i915_oa_cflgt2.h"
 #include "i915_oa_cflgt3.h"
+#include "i915_oa_cnl.h"
 
 /* HW requires this to be a power of two, between 128k and 16M, though driver
  * is currently generally designed assuming the largest 16M size is used such
@@ -1852,7 +1853,7 @@ static int gen8_enable_metric_set(struct drm_i915_private *dev_priv,
 	 * be read back from automatically triggered reports, as part of the
 	 * RPT_ID field.
 	 */
-	if (IS_GEN9(dev_priv)) {
+	if (IS_GEN9(dev_priv) || IS_GEN10(dev_priv)) {
 		I915_WRITE(GEN8_OA_DEBUG,
 			   _MASKED_BIT_ENABLE(GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS |
 					      GEN9_OA_DEBUG_INCLUDE_CLK_RATIO));
@@ -1885,6 +1886,16 @@ static void gen8_disable_metric_set(struct drm_i915_private *dev_priv)
 
 }
 
+static void gen10_disable_metric_set(struct drm_i915_private *dev_priv)
+{
+	/* Reset all contexts' slices/subslices configurations. */
+	gen8_configure_all_contexts(dev_priv, NULL, false);
+
+	/* Make sure we disable noa to save power. */
+	I915_WRITE(RPM_CONFIG1,
+		   I915_READ(RPM_CONFIG1) & ~GEN10_GT_NOA_ENABLE);
+}
+
 static void gen7_oa_enable(struct drm_i915_private *dev_priv)
 {
 	/*
@@ -2937,6 +2948,8 @@ void i915_perf_register(struct drm_i915_private *dev_priv)
 			i915_perf_load_test_config_cflgt2(dev_priv);
 		if (IS_CFL_GT3(dev_priv))
 			i915_perf_load_test_config_cflgt3(dev_priv);
+	} else if (IS_CANNONLAKE(dev_priv)) {
+		i915_perf_load_test_config_cnl(dev_priv);
 	}
 
 	if (dev_priv->perf.oa.test_config.id == 0)
@@ -3022,6 +3035,12 @@ static bool gen8_is_valid_mux_addr(struct drm_i915_private *dev_priv, u32 addr)
 		(addr >= RPM_CONFIG0.reg && addr <= NOA_CONFIG(8).reg);
 }
 
+static bool gen10_is_valid_mux_addr(struct drm_i915_private *dev_priv, u32 addr)
+{
+	return gen8_is_valid_mux_addr(dev_priv, addr) ||
+		(addr >= OA_PERFCNT3_LO.reg && addr <= OA_PERFCNT4_HI.reg);
+}
+
 static bool hsw_is_valid_mux_addr(struct drm_i915_private *dev_priv, u32 addr)
 {
 	return gen7_is_valid_mux_addr(dev_priv, addr) ||
@@ -3475,6 +3494,26 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
 			default:
 				break;
 			}
+		} else if (IS_GEN10(dev_priv)) {
+			dev_priv->perf.oa.ops.is_valid_b_counter_reg =
+				gen7_is_valid_b_counter_addr;
+			dev_priv->perf.oa.ops.is_valid_mux_reg =
+				gen10_is_valid_mux_addr;
+			dev_priv->perf.oa.ops.is_valid_flex_reg =
+				gen8_is_valid_flex_addr;
+
+			dev_priv->perf.oa.ops.enable_metric_set = gen8_enable_metric_set;
+			dev_priv->perf.oa.ops.disable_metric_set = gen10_disable_metric_set;
+
+			dev_priv->perf.oa.ctx_oactxctrl_offset = 0x128;
+			dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de;
+
+			dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16);
+
+			/* Default frequency, although we need to read it from
+			 * the register as it might vary between parts.
+			 */
+			dev_priv->perf.oa.timestamp_frequency = 12000000;
 		}
 	}