drm/i915: Cleanup crt disable sequence on hsw+

Instead of iterating overthe connectors manually, run the last part of
DDI disabling inside the crt post disable function.

This was meant to be addressed before submitting the other commit,
but I missed the review comments.

Fixes: fd6bbda9c7a4 ("drm/i915: Pass crtc_state and connector_state to encoder functions")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471961888-10771-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Fix extra whitespace between functions.]

1 files changed, 33 insertions, 33 deletions

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 309ba7bc19ad..ce369c2e96a0 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1714,6 +1714,39 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder,
 	}
 }
 
+void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder,
+				struct intel_crtc_state *old_crtc_state,
+				struct drm_connector_state *old_conn_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
+	uint32_t val;
+
+	/*
+	 * Bspec lists this as both step 13 (before DDI_BUF_CTL disable)
+	 * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN,
+	 * step 13 is the correct place for it. Step 18 is where it was
+	 * originally before the BUN.
+	 */
+	val = I915_READ(FDI_RX_CTL(PIPE_A));
+	val &= ~FDI_RX_ENABLE;
+	I915_WRITE(FDI_RX_CTL(PIPE_A), val);
+
+	intel_ddi_post_disable(intel_encoder, old_crtc_state, old_conn_state);
+
+	val = I915_READ(FDI_RX_MISC(PIPE_A));
+	val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+	val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
+	I915_WRITE(FDI_RX_MISC(PIPE_A), val);
+
+	val = I915_READ(FDI_RX_CTL(PIPE_A));
+	val &= ~FDI_PCDCLK;
+	I915_WRITE(FDI_RX_CTL(PIPE_A), val);
+
+	val = I915_READ(FDI_RX_CTL(PIPE_A));
+	val &= ~FDI_RX_PLL_ENABLE;
+	I915_WRITE(FDI_RX_CTL(PIPE_A), val);
+}
+
 static void intel_enable_ddi(struct intel_encoder *intel_encoder,
 			     struct intel_crtc_state *pipe_config,
 			     struct drm_connector_state *conn_state)
@@ -2153,39 +2186,6 @@ void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
 	udelay(600);
 }
 
-void intel_ddi_fdi_disable(struct intel_encoder *intel_encoder,
-			   struct intel_crtc_state *old_crtc_state,
-			   struct drm_connector_state *old_conn_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
-	uint32_t val;
-
-	/*
-	 * Bspec lists this as both step 13 (before DDI_BUF_CTL disable)
-	 * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN,
-	 * step 13 is the correct place for it. Step 18 is where it was
-	 * originally before the BUN.
-	 */
-	val = I915_READ(FDI_RX_CTL(PIPE_A));
-	val &= ~FDI_RX_ENABLE;
-	I915_WRITE(FDI_RX_CTL(PIPE_A), val);
-
-	intel_ddi_post_disable(intel_encoder, old_crtc_state, old_conn_state);
-
-	val = I915_READ(FDI_RX_MISC(PIPE_A));
-	val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
-	val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
-	I915_WRITE(FDI_RX_MISC(PIPE_A), val);
-
-	val = I915_READ(FDI_RX_CTL(PIPE_A));
-	val &= ~FDI_PCDCLK;
-	I915_WRITE(FDI_RX_CTL(PIPE_A), val);
-
-	val = I915_READ(FDI_RX_CTL(PIPE_A));
-	val &= ~FDI_RX_PLL_ENABLE;
-	I915_WRITE(FDI_RX_CTL(PIPE_A), val);
-}
-
 void intel_ddi_get_config(struct intel_encoder *encoder,
 			  struct intel_crtc_state *pipe_config)
 {