drm/i915: Put back lane_count into intel_dp and add link_rate too

With MST there won't be a crtc assigned to the main link encoder, so
trying to dig up the pipe_config from there is a recipe for an oops.

Instead store the parameters (lane_count and link_rate) in the encoder,
and use those values during link training etc. Since those parameters
are now assigned only when the link is actually enabled,
.compute_config() won't clobber them as it did before.

Hardware state readout is still bonkers though as we don't transfer the
link parameters from pipe_config intel_dp. We should do that during
encoder sanitation. But since we don't even do a proper job of reading
out the main link encoder state for MST there's littel point in
worrying about this now.

Fixes a regression with MST caused by:
 commit 90a6b7b052b1aa17fbb98b049e9c8b7f729c35a7
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Mon Jul 6 16:39:15 2015 +0300

    drm/i915: Move intel_dp->lane_count into pipe_config

v2: Different apporoach that should keep intel_dp_check_mst_status()
    somewhat less oopsy

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 24 insertions, 29 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b905c19e11a1..dcda86a7d68d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1584,6 +1584,13 @@ static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp)
 	udelay(500);
 }
 
+void intel_dp_set_link_params(struct intel_dp *intel_dp,
+			      const struct intel_crtc_state *pipe_config)
+{
+	intel_dp->link_rate = pipe_config->port_clock;
+	intel_dp->lane_count = pipe_config->lane_count;
+}
+
 static void intel_dp_prepare(struct intel_encoder *encoder)
 {
 	struct drm_device *dev = encoder->base.dev;
@@ -1593,6 +1600,8 @@ static void intel_dp_prepare(struct intel_encoder *encoder)
 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 	struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
 
+	intel_dp_set_link_params(intel_dp, crtc->config);
+
 	/*
 	 * There are four kinds of DP registers:
 	 *
@@ -3348,15 +3357,13 @@ static void
 intel_get_adjust_train(struct intel_dp *intel_dp,
 		       const uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
-	struct intel_crtc *crtc =
-		to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
 	uint8_t v = 0;
 	uint8_t p = 0;
 	int lane;
 	uint8_t voltage_max;
 	uint8_t preemph_max;
 
-	for (lane = 0; lane < crtc->config->lane_count; lane++) {
+	for (lane = 0; lane < intel_dp->lane_count; lane++) {
 		uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
 		uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
 
@@ -3527,8 +3534,6 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv =
 		to_i915(intel_dig_port->base.base.dev);
-	struct intel_crtc *crtc =
-		to_intel_crtc(intel_dig_port->base.base.crtc);
 	uint8_t buf[sizeof(intel_dp->train_set) + 1];
 	int ret, len;
 
@@ -3544,8 +3549,8 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 		len = 1;
 	} else {
 		/* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
-		memcpy(buf + 1, intel_dp->train_set, crtc->config->lane_count);
-		len = crtc->config->lane_count + 1;
+		memcpy(buf + 1, intel_dp->train_set, intel_dp->lane_count);
+		len = intel_dp->lane_count + 1;
 	}
 
 	ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET,
@@ -3571,8 +3576,6 @@ intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv =
 		to_i915(intel_dig_port->base.base.dev);
-	struct intel_crtc *crtc =
-		to_intel_crtc(intel_dig_port->base.base.crtc);
 	int ret;
 
 	intel_get_adjust_train(intel_dp, link_status);
@@ -3582,9 +3585,9 @@ intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
 	POSTING_READ(intel_dp->output_reg);
 
 	ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
-				intel_dp->train_set, crtc->config->lane_count);
+				intel_dp->train_set, intel_dp->lane_count);
 
-	return ret == crtc->config->lane_count;
+	return ret == intel_dp->lane_count;
 }
 
 static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
@@ -3623,8 +3626,6 @@ void
 intel_dp_start_link_train(struct intel_dp *intel_dp)
 {
 	struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base;
-	struct intel_crtc *crtc =
-		to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
 	struct drm_device *dev = encoder->dev;
 	int i;
 	uint8_t voltage;
@@ -3636,12 +3637,12 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 	if (HAS_DDI(dev))
 		intel_ddi_prepare_link_retrain(encoder);
 
-	intel_dp_compute_rate(intel_dp, crtc->config->port_clock,
+	intel_dp_compute_rate(intel_dp, intel_dp->link_rate,
 			      &link_bw, &rate_select);
 
 	/* Write the link configuration data */
 	link_config[0] = link_bw;
-	link_config[1] = crtc->config->lane_count;
+	link_config[1] = intel_dp->lane_count;
 	if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
 		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
 	drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
@@ -3675,7 +3676,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 			break;
 		}
 
-		if (drm_dp_clock_recovery_ok(link_status, crtc->config->lane_count)) {
+		if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
 			DRM_DEBUG_KMS("clock recovery OK\n");
 			break;
 		}
@@ -3698,10 +3699,10 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 		}
 
 		/* Check to see if we've tried the max voltage */
-		for (i = 0; i < crtc->config->lane_count; i++)
+		for (i = 0; i < intel_dp->lane_count; i++)
 			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
 				break;
-		if (i == crtc->config->lane_count) {
+		if (i == intel_dp->lane_count) {
 			++loop_tries;
 			if (loop_tries == 5) {
 				DRM_ERROR("too many full retries, give up\n");
@@ -3738,15 +3739,13 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 void
 intel_dp_complete_link_train(struct intel_dp *intel_dp)
 {
-	struct intel_crtc *crtc =
-		to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
 	bool channel_eq = false;
 	int tries, cr_tries;
 	uint32_t DP = intel_dp->DP;
 	uint32_t training_pattern = DP_TRAINING_PATTERN_2;
 
 	/* Training Pattern 3 for HBR2 or 1.2 devices that support it*/
-	if (crtc->config->port_clock == 540000 || intel_dp->use_tps3)
+	if (intel_dp->link_rate == 540000 || intel_dp->use_tps3)
 		training_pattern = DP_TRAINING_PATTERN_3;
 
 	/* channel equalization */
@@ -3776,7 +3775,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 
 		/* Make sure clock is still ok */
 		if (!drm_dp_clock_recovery_ok(link_status,
-					      crtc->config->lane_count)) {
+					      intel_dp->lane_count)) {
 			intel_dp->train_set_valid = false;
 			intel_dp_start_link_train(intel_dp);
 			intel_dp_set_link_train(intel_dp, &DP,
@@ -3787,7 +3786,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 		}
 
 		if (drm_dp_channel_eq_ok(link_status,
-					 crtc->config->lane_count)) {
+					 intel_dp->lane_count)) {
 			channel_eq = true;
 			break;
 		}
@@ -4285,8 +4284,6 @@ update_status:
 static int
 intel_dp_check_mst_status(struct intel_dp *intel_dp)
 {
-	struct intel_crtc *crtc =
-		to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
 	bool bret;
 
 	if (intel_dp->is_mst) {
@@ -4300,7 +4297,7 @@ go_again:
 
 			/* check link status - esi[10] = 0x200c */
 			if (intel_dp->active_mst_links &&
-			    !drm_dp_channel_eq_ok(&esi[10], crtc->config->lane_count)) {
+			    !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
 				DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
 				intel_dp_start_link_train(intel_dp);
 				intel_dp_complete_link_train(intel_dp);
@@ -4355,8 +4352,6 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
-	struct intel_crtc *crtc =
-		to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
 	u8 sink_irq_vector;
 	u8 link_status[DP_LINK_STATUS_SIZE];
 
@@ -4392,7 +4387,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
 			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
 	}
 
-	if (!drm_dp_channel_eq_ok(link_status, crtc->config->lane_count)) {
+	if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
 		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
 			      intel_encoder->base.name);
 		intel_dp_start_link_train(intel_dp);