summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_uncore.c
diff options
context:
space:
mode:
authorChris Wilson2016-06-30 16:32:44 +0200
committerChris Wilson2016-06-30 16:41:58 +0200
commit1758b90e38f53b93821c908201826e825a37cb65 (patch)
tree7b47d24e7690862c514b529fc6e384d4bf76c270 /drivers/gpu/drm/i915/intel_uncore.c
parentRevert "drm/i915: Use atomic commits for legacy page_flips" (diff)
downloadkernel-qcow2-linux-1758b90e38f53b93821c908201826e825a37cb65.tar.gz
kernel-qcow2-linux-1758b90e38f53b93821c908201826e825a37cb65.tar.xz
kernel-qcow2-linux-1758b90e38f53b93821c908201826e825a37cb65.zip
drm/i915: Use a hybrid scheme for fast register waits
Ville Syrjälä reported that in the majority of wait_for(I915_READ()) he inspect, most completed within the first couple of reads and that the delay between those wait_for() reads was the ratelimiting step for many code paths. For example, __gen6_update_ring_freq() was blamed for slowing down boot by many milliseconds, but under Ville's scrutiny the issue was just excessive delay waiting for sandybridge_pcode_write(). We can eliminate the wait by initially using a busyspin upon the register read and only fallback to the sleeping loop in cases where the hardware is indeed too slow. A threshold of 2 microseconds is used as the initial ballpark. To avoid excessive code bloating from converting every wait_for() into a hybrid busy/sleep loop, we extend wait_for_register_fw() and export it for use by other callers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-1-git-send-email-chris@chris-wilson.co.uk
Diffstat (limited to 'drivers/gpu/drm/i915/intel_uncore.c')
-rw-r--r--drivers/gpu/drm/i915/intel_uncore.c83
1 files changed, 72 insertions, 11 deletions
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index c1ca458d688e..4c166f6550be 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -1609,13 +1609,74 @@ static int gen6_reset_engines(struct drm_i915_private *dev_priv,
return ret;
}
-static int wait_for_register_fw(struct drm_i915_private *dev_priv,
- i915_reg_t reg,
- const u32 mask,
- const u32 value,
- const unsigned long timeout_ms)
+/**
+ * intel_wait_for_register_fw - wait until register matches expected state
+ * @dev_priv: the i915 device
+ * @reg: the register to read
+ * @mask: mask to apply to register value
+ * @value: expected value
+ * @timeout_ms: timeout in millisecond
+ *
+ * This routine waits until the target register @reg contains the expected
+ * @value after applying the @mask, i.e. it waits until
+ * (I915_READ_FW(@reg) & @mask) == @value
+ * Otherwise, the wait will timeout after @timeout_ms milliseconds.
+ *
+ * Note that this routine assumes the caller holds forcewake asserted, it is
+ * not suitable for very long waits. See intel_wait_for_register() if you
+ * wish to wait without holding forcewake for the duration (i.e. you expect
+ * the wait to be slow).
+ *
+ * Returns 0 if the register matches the desired condition, or -ETIMEOUT.
+ */
+int intel_wait_for_register_fw(struct drm_i915_private *dev_priv,
+ i915_reg_t reg,
+ const u32 mask,
+ const u32 value,
+ const unsigned long timeout_ms)
+{
+#define done ((I915_READ_FW(reg) & mask) == value)
+ int ret = wait_for_us(done, 2);
+ if (ret)
+ ret = wait_for(done, timeout_ms);
+ return ret;
+#undef done
+}
+
+/**
+ * intel_wait_for_register - wait until register matches expected state
+ * @dev_priv: the i915 device
+ * @reg: the register to read
+ * @mask: mask to apply to register value
+ * @value: expected value
+ * @timeout_ms: timeout in millisecond
+ *
+ * This routine waits until the target register @reg contains the expected
+ * @value after applying the @mask, i.e. it waits until
+ * (I915_READ(@reg) & @mask) == @value
+ * Otherwise, the wait will timeout after @timeout_ms milliseconds.
+ *
+ * Returns 0 if the register matches the desired condition, or -ETIMEOUT.
+ */
+int intel_wait_for_register(struct drm_i915_private *dev_priv,
+ i915_reg_t reg,
+ const u32 mask,
+ const u32 value,
+ const unsigned long timeout_ms)
{
- return wait_for((I915_READ_FW(reg) & mask) == value, timeout_ms);
+
+ unsigned fw =
+ intel_uncore_forcewake_for_reg(dev_priv, reg, FW_REG_READ);
+ int ret;
+
+ intel_uncore_forcewake_get(dev_priv, fw);
+ ret = wait_for_us((I915_READ_FW(reg) & mask) == value, 2);
+ intel_uncore_forcewake_put(dev_priv, fw);
+ if (ret)
+ ret = wait_for((I915_READ_NOTRACE(reg) & mask) == value,
+ timeout_ms);
+
+ return ret;
}
static int gen8_request_engine_reset(struct intel_engine_cs *engine)
@@ -1626,11 +1687,11 @@ static int gen8_request_engine_reset(struct intel_engine_cs *engine)
I915_WRITE_FW(RING_RESET_CTL(engine->mmio_base),
_MASKED_BIT_ENABLE(RESET_CTL_REQUEST_RESET));
- ret = wait_for_register_fw(dev_priv,
- RING_RESET_CTL(engine->mmio_base),
- RESET_CTL_READY_TO_RESET,
- RESET_CTL_READY_TO_RESET,
- 700);
+ ret = intel_wait_for_register_fw(dev_priv,
+ RING_RESET_CTL(engine->mmio_base),
+ RESET_CTL_READY_TO_RESET,
+ RESET_CTL_READY_TO_RESET,
+ 700);
if (ret)
DRM_ERROR("%s: reset request timeout\n", engine->name);