rapidio: add Port-Write handling for EM

Add RapidIO Port-Write message handling in the context of Error
   Management Extensions Specification Rev.1.3.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 153 insertions, 0 deletions

diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
index 5ad7880787c9..23040b92ea76 100644
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -25,6 +25,14 @@
 #define SPP_ROUTE_CFG_DESTID(n)	(0x11070 + 0x100*n)
 #define SPP_ROUTE_CFG_PORT(n)	(0x11074 + 0x100*n)
 
+#define TSI578_SP_MODE(n)	(0x11004 + n*0x100)
+#define  TSI578_SP_MODE_PW_DIS	0x08000000
+
+#define TSI578_SP_CTL_INDEP(n)	(0x13004 + n*0x100)
+#define TSI578_SP_LUT_PEINF(n)	(0x13010 + n*0x100)
+#define TSI578_SP_CS_TX(n)	(0x13014 + n*0x100)
+#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100)
+
 static int
 tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
 		       u16 table, u16 route_destid, u8 route_port)
@@ -104,3 +112,148 @@ DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_route_add_entry, ts
 DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
 DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
 DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
+
+static int
+tsi57x_em_init(struct rio_dev *rdev)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	u32 regval;
+	int portnum;
+
+	pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount);
+
+	for (portnum = 0; portnum < 16; portnum++) {
+		/* Make sure that Port-Writes are enabled (for all ports) */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_MODE(portnum), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				TSI578_SP_MODE(portnum),
+				regval & ~TSI578_SP_MODE_PW_DIS);
+
+		/* Clear all pending interrupts */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				rdev->phys_efptr +
+					RIO_PORT_N_ERR_STS_CSR(portnum),
+				&regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				rdev->phys_efptr +
+					RIO_PORT_N_ERR_STS_CSR(portnum),
+				regval & 0x07120214);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_INT_STATUS(portnum), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				TSI578_SP_INT_STATUS(portnum),
+				regval & 0x000700bd);
+
+		/* Enable all interrupts to allow ports to send a port-write */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_CTL_INDEP(portnum), &regval);
+		rio_mport_write_config_32(mport, destid, hopcount,
+				TSI578_SP_CTL_INDEP(portnum),
+				regval | 0x000b0000);
+
+		/* Skip next (odd) port if the current port is in x4 mode */
+		rio_mport_read_config_32(mport, destid, hopcount,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				&regval);
+		if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
+			portnum++;
+	}
+
+	return 0;
+}
+
+static int
+tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+	struct rio_mport *mport = rdev->net->hport;
+	u16 destid = rdev->rswitch->destid;
+	u8 hopcount = rdev->rswitch->hopcount;
+	u32 intstat, err_status;
+	int sendcount, checkcount;
+	u8 route_port;
+	u32 regval;
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			&err_status);
+
+	if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
+	    (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+			  RIO_PORT_N_ERR_STS_PW_INP_ES))) {
+		/* Remove any queued packets by locking/unlocking port */
+		rio_mport_read_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+			&regval);
+		if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				regval | RIO_PORT_N_CTL_LOCKOUT);
+			udelay(50);
+			rio_mport_write_config_32(mport, destid, hopcount,
+				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				regval);
+		}
+
+		/* Read from link maintenance response register to clear
+		 * valid bit
+		 */
+		rio_mport_read_config_32(mport, destid, hopcount,
+			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
+			&regval);
+
+		/* Send a Packet-Not-Accepted/Link-Request-Input-Status control
+		 * symbol to recover from IES/OES
+		 */
+		sendcount = 3;
+		while (sendcount) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+					  TSI578_SP_CS_TX(portnum), 0x40fc8000);
+			checkcount = 3;
+			while (checkcount--) {
+				udelay(50);
+				rio_mport_read_config_32(
+					mport, destid, hopcount,
+					rdev->phys_efptr +
+						RIO_PORT_N_MNT_RSP_CSR(portnum),
+					&regval);
+				if (regval & RIO_PORT_N_MNT_RSP_RVAL)
+					goto exit_es;
+			}
+
+			sendcount--;
+		}
+	}
+
+exit_es:
+	/* Clear implementation specific error status bits */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				 TSI578_SP_INT_STATUS(portnum), &intstat);
+	pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n",
+		 destid, hopcount, portnum, intstat);
+
+	if (intstat & 0x10000) {
+		rio_mport_read_config_32(mport, destid, hopcount,
+				TSI578_SP_LUT_PEINF(portnum), &regval);
+		regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24);
+		route_port = rdev->rswitch->route_table[regval];
+		pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n",
+			rio_name(rdev), portnum, regval);
+		tsi57x_route_add_entry(mport, destid, hopcount,
+				RIO_GLOBAL_TABLE, regval, route_port);
+	}
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  TSI578_SP_INT_STATUS(portnum),
+				  intstat & 0x000700bd);
+
+	return 0;
+}
+
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_em_init, tsi57x_em_handler);
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_em_init, tsi57x_em_handler);
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_em_init, tsi57x_em_handler);
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_em_init, tsi57x_em_handler);