Merge branch 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (122 commits)
  [ALSA] version 1.0.14rc4
  [ALSA] Add speaker pin sequencing to hda_codec.c:snd_hda_parse_pin_def_config()
  [ALSA] hda-codec - Add ALC861VD Lenovo support
  [ALSA] hda-codec - Fix connection list in generic parser
  [ALSA] usb-audio: work around wrong wMaxPacketSize on ESI M4U
  [ALSA] usb-audio: work around broken M-Audio MidiSport Uno firmware
  [ALSA] usb-audio: explicitly match Logitech QuickCam
  [ALSA] hda-codec - Fix a typo
  [ALSA] hda-codec - Fix ALC880 uniwill auto-mutes
  [ALSA] hda-codec - Fix AD1988 SPDIF playback route control
  [ALSA] wm8750 typo fix
  [ALSA] wavefront: only declare isapnp on CONFIG_PNP
  [ALSA] hda-codec - bug fixes for stac92xx HDA codecs.
  [ALSA] add MODULE_FIRMWARE entries
  [ALSA] do not depend on FW_LOADER when internal firmware images are used
  [ALSA] hda-codec - Fix resume of STAC92xx codecs
  [ALSA] usbaudio - Revert the minimal period size fix patch
  [ALSA] hda-codec - Add support for new HP DV series laptops
  [ALSA] usb-audio - Fix the minimum period size per transfer mode
  [ALSA] sound/pcmcia/vx/vxpocket.c: fix an if() condition
  ...

14 files changed, 1819 insertions, 3 deletions

diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index f05d02f5b69f..315360f31278 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -29,5 +29,33 @@ config SND_USB_USX2Y
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-usb-usx2y.
 
+config SND_USB_CAIAQ
+	tristate "Native Instruments USB audio devices"
+	 depends on SND && USB
+	 select SND_HWDEP
+	 select SND_RAWMIDI
+	 select SND_PCM
+	 help
+	   Say Y here to include support for caiaq USB audio interfaces,
+	   namely:
+
+	    * Native Instruments RigKontrol2
+	    * Native Instruments Kore Controller
+	    * Native Instruments Audio Kontrol 1
+	    * Native Instruments Audio 8 DJ
+
+	   To compile this driver as a module, choose M here: the module
+	   will be called snd-usb-caiaq.
+
+config SND_USB_CAIAQ_INPUT
+	bool "enable input device for controllers"
+	depends on SND_USB_CAIAQ
+	help
+	  Say Y here to support input controllers like buttons, knobs,
+	  alpha dials and analog pedals on the following products:
+
+	   * Native Instruments RigKontrol2
+	   * Native Instruments Audio Kontrol 1
+
 endmenu
 
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index 2c1dc11a72e2..aa252ef2ebfb 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -9,4 +9,4 @@ snd-usb-lib-objs := usbmidi.o
 obj-$(CONFIG_SND_USB_AUDIO) += snd-usb-audio.o snd-usb-lib.o
 obj-$(CONFIG_SND_USB_USX2Y) += snd-usb-lib.o
 
-obj-$(CONFIG_SND) += usx2y/
+obj-$(CONFIG_SND) += usx2y/ caiaq/
diff --git a/sound/usb/caiaq/Makefile b/sound/usb/caiaq/Makefile
new file mode 100644
index 000000000000..455c8c58a1bd
--- /dev/null
+++ b/sound/usb/caiaq/Makefile
@@ -0,0 +1,3 @@
+snd-usb-caiaq-objs := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-input.o
+
+obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o
diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c
new file mode 100644
index 000000000000..0414d766ba07
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-audio.c
@@ -0,0 +1,707 @@
+/*
+ *   Copyright (c) 2006,2007 Daniel Mack, Karsten Wiese
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+*/
+
+#include <sound/driver.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/spinlock.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/rawmidi.h>
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+#include <linux/input.h>
+#endif
+
+#include "caiaq-device.h"
+#include "caiaq-audio.h"
+
+#define N_URBS			32
+#define CLOCK_DRIFT_TOLERANCE	5
+#define FRAMES_PER_URB		8
+#define BYTES_PER_FRAME		512
+#define CHANNELS_PER_STREAM	2
+#define BYTES_PER_SAMPLE	3
+#define BYTES_PER_SAMPLE_USB	4
+#define MAX_BUFFER_SIZE		(128*1024)
+				 
+#define ENDPOINT_CAPTURE	2
+#define ENDPOINT_PLAYBACK	6
+
+#define MAKE_CHECKBYTE(dev,stream,i) \
+	(stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1)
+
+static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = {
+	.info 		= (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | 
+			   SNDRV_PCM_INFO_BLOCK_TRANSFER),
+	.formats 	= SNDRV_PCM_FMTBIT_S24_3BE,
+	.rates 		= (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | 
+			   SNDRV_PCM_RATE_96000),
+	.rate_min	= 44100,
+	.rate_max	= 0, /* will overwrite later */
+	.channels_min	= CHANNELS_PER_STREAM,
+	.channels_max	= CHANNELS_PER_STREAM,
+	.buffer_bytes_max = MAX_BUFFER_SIZE,
+	.period_bytes_min = 4096,
+	.period_bytes_max = MAX_BUFFER_SIZE,
+	.periods_min	= 1,
+	.periods_max	= 1024,
+};
+
+static void
+activate_substream(struct snd_usb_caiaqdev *dev,
+	           struct snd_pcm_substream *sub)
+{
+	if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dev->sub_playback[sub->number] = sub;
+	else
+		dev->sub_capture[sub->number] = sub;
+}
+
+static void 
+deactivate_substream(struct snd_usb_caiaqdev *dev,
+		     struct snd_pcm_substream *sub)
+{
+	if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dev->sub_playback[sub->number] = NULL;
+	else
+		dev->sub_capture[sub->number] = NULL;
+}
+
+static int
+all_substreams_zero(struct snd_pcm_substream **subs)
+{
+	int i;
+	for (i = 0; i < MAX_STREAMS; i++)
+		if (subs[i] != NULL)
+			return 0;
+	return 1;
+}
+
+static int stream_start(struct snd_usb_caiaqdev *dev)
+{
+	int i, ret;
+
+	debug("stream_start(%p)\n", dev);
+	spin_lock_irq(&dev->spinlock);
+	if (dev->streaming) {
+		spin_unlock_irq(&dev->spinlock);
+		return -EINVAL;
+	}
+
+	dev->input_panic = 0;
+	dev->output_panic = 0;
+	dev->first_packet = 1;
+	dev->streaming = 1;
+
+	for (i = 0; i < N_URBS; i++) {
+		ret = usb_submit_urb(dev->data_urbs_in[i], GFP_ATOMIC);
+		if (ret) {
+			log("unable to trigger initial read #%d! (ret = %d)\n",
+				i, ret);
+			dev->streaming = 0;
+			spin_unlock_irq(&dev->spinlock);
+			return -EPIPE;
+		}
+	}
+	
+	spin_unlock_irq(&dev->spinlock);
+	return 0;
+}
+
+static void stream_stop(struct snd_usb_caiaqdev *dev)
+{
+	int i;
+	
+	debug("stream_stop(%p)\n", dev);
+	if (!dev->streaming)
+		return;
+	
+	dev->streaming = 0;
+	for (i = 0; i < N_URBS; i++) {
+		usb_unlink_urb(dev->data_urbs_in[i]);
+		usb_unlink_urb(dev->data_urbs_out[i]);
+	}
+}
+
+static int snd_usb_caiaq_substream_open(struct snd_pcm_substream *substream)
+{
+	struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+	debug("snd_usb_caiaq_substream_open(%p)\n", substream);
+	substream->runtime->hw = dev->pcm_info;
+	snd_pcm_limit_hw_rates(substream->runtime);
+	return 0;
+}
+
+static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream)
+{
+	struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+
+	debug("snd_usb_caiaq_substream_close(%p)\n", substream);
+	if (all_substreams_zero(dev->sub_playback) &&
+	    all_substreams_zero(dev->sub_capture)) {
+		/* when the last client has stopped streaming, 
+		 * all sample rates are allowed again */
+		stream_stop(dev);
+		dev->pcm_info.rates = dev->samplerates;
+	}
+	
+	return 0;
+}
+
+static int snd_usb_caiaq_pcm_hw_params(struct snd_pcm_substream *sub,
+			     		struct snd_pcm_hw_params *hw_params)
+{
+	debug("snd_usb_caiaq_pcm_hw_params(%p)\n", sub);
+	return snd_pcm_lib_malloc_pages(sub, params_buffer_bytes(hw_params));
+}
+
+static int snd_usb_caiaq_pcm_hw_free(struct snd_pcm_substream *sub)
+{
+	struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+	debug("snd_usb_caiaq_pcm_hw_free(%p)\n", sub);
+	spin_lock_irq(&dev->spinlock);
+	deactivate_substream(dev, sub);
+	spin_unlock_irq(&dev->spinlock);
+	return snd_pcm_lib_free_pages(sub);
+}
+
+/* this should probably go upstream */
+#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12
+#error "Change this table"
+#endif
+
+static unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100,
+                                 48000, 64000, 88200, 96000, 176400, 192000 };
+
+static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	int bytes_per_sample, bpp, ret, i;
+	int index = substream->number;
+	struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	debug("snd_usb_caiaq_pcm_prepare(%p)\n", substream);
+	
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
+	else
+		dev->audio_in_buf_pos[index] = 0;
+	
+	if (dev->streaming)
+		return 0;
+	
+	/* the first client that opens a stream defines the sample rate
+	 * setting for all subsequent calls, until the last client closed. */
+	for (i=0; i < ARRAY_SIZE(rates); i++)
+		if (runtime->rate == rates[i])
+			dev->pcm_info.rates = 1 << i;
+	
+	snd_pcm_limit_hw_rates(runtime);
+
+	bytes_per_sample = BYTES_PER_SAMPLE;
+	if (dev->spec.data_alignment == 2)
+		bytes_per_sample++;
+	
+	bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE)
+		* bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams;
+	
+	ret = snd_usb_caiaq_set_audio_params(dev, runtime->rate,
+					     runtime->sample_bits, bpp);
+	if (ret)
+		return ret;
+
+	ret = stream_start(dev);
+	if (ret)
+		return ret;
+	
+	dev->output_running = 0;
+	wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ);
+	if (!dev->output_running) {
+		stream_stop(dev);
+		return -EPIPE;
+	}
+
+	return 0;
+}
+
+static int snd_usb_caiaq_pcm_trigger(struct snd_pcm_substream *sub, int cmd)
+{
+	struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock(&dev->spinlock);
+		activate_substream(dev, sub);
+		spin_unlock(&dev->spinlock);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock(&dev->spinlock);
+		deactivate_substream(dev, sub);
+		spin_unlock(&dev->spinlock);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t
+snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
+{
+	int index = sub->number;
+	struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+
+	if (dev->input_panic || dev->output_panic)
+		return SNDRV_PCM_POS_XRUN;
+
+	if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return bytes_to_frames(sub->runtime, 
+					dev->audio_out_buf_pos[index]);
+	else
+		return bytes_to_frames(sub->runtime,
+					dev->audio_in_buf_pos[index]);
+}
+
+/* operators for both playback and capture */
+static struct snd_pcm_ops snd_usb_caiaq_ops = {
+	.open =		snd_usb_caiaq_substream_open,
+	.close =	snd_usb_caiaq_substream_close,
+	.ioctl =	snd_pcm_lib_ioctl,
+	.hw_params =	snd_usb_caiaq_pcm_hw_params,
+	.hw_free =	snd_usb_caiaq_pcm_hw_free,
+	.prepare =	snd_usb_caiaq_pcm_prepare,
+	.trigger =	snd_usb_caiaq_pcm_trigger,
+	.pointer =	snd_usb_caiaq_pcm_pointer
+};
+	
+static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
+				      struct snd_pcm_substream **subs)
+{
+	int stream, pb, *cnt;
+	struct snd_pcm_substream *sub;
+
+	for (stream = 0; stream < dev->n_streams; stream++) {
+		sub = subs[stream];
+		if (!sub)
+			continue;
+
+		pb = frames_to_bytes(sub->runtime, 
+				     sub->runtime->period_size);
+		cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+					&dev->period_out_count[stream] :
+					&dev->period_in_count[stream];
+
+		if (*cnt >= pb) {
+			snd_pcm_period_elapsed(sub);
+			*cnt %= pb;
+		}
+	}
+}
+
+static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev,
+			      const struct urb *urb,
+			      const struct usb_iso_packet_descriptor *iso)
+{
+	unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+	struct snd_pcm_substream *sub;
+	int stream, i;
+
+	if (all_substreams_zero(dev->sub_capture))
+		return;
+
+	spin_lock(&dev->spinlock);
+	
+	for (i = 0; i < iso->actual_length;) {
+		for (stream = 0; stream < dev->n_streams; stream++, i++) {
+			sub = dev->sub_capture[stream];
+			if (sub) {
+				struct snd_pcm_runtime *rt = sub->runtime;
+				char *audio_buf = rt->dma_area;
+				int sz = frames_to_bytes(rt, rt->buffer_size);
+				audio_buf[dev->audio_in_buf_pos[stream]++] 
+					= usb_buf[i];
+				dev->period_in_count[stream]++;
+				if (dev->audio_in_buf_pos[stream] == sz)
+					dev->audio_in_buf_pos[stream] = 0;
+			}
+		}
+	}
+	
+	spin_unlock(&dev->spinlock);
+}
+
+static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev,
+			      const struct urb *urb,
+			      const struct usb_iso_packet_descriptor *iso)
+{
+	unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+	unsigned char check_byte;
+	struct snd_pcm_substream *sub;
+	int stream, i;
+
+	spin_lock(&dev->spinlock);
+	
+	for (i = 0; i < iso->actual_length;) {
+		if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) {
+			for (stream = 0; 
+			     stream < dev->n_streams; 
+			     stream++, i++) {
+				if (dev->first_packet)
+					continue;
+
+				check_byte = MAKE_CHECKBYTE(dev, stream, i);
+				
+				if ((usb_buf[i] & 0x3f) != check_byte)
+					dev->input_panic = 1;
+
+				if (usb_buf[i] & 0x80)
+					dev->output_panic = 1;
+			}
+		}
+		dev->first_packet = 0;
+
+		for (stream = 0; stream < dev->n_streams; stream++, i++) {
+			sub = dev->sub_capture[stream];
+			if (sub) {
+				struct snd_pcm_runtime *rt = sub->runtime;
+				char *audio_buf = rt->dma_area;
+				int sz = frames_to_bytes(rt, rt->buffer_size);
+				audio_buf[dev->audio_in_buf_pos[stream]++] =
+					usb_buf[i];
+				dev->period_in_count[stream]++;
+				if (dev->audio_in_buf_pos[stream] == sz)
+					dev->audio_in_buf_pos[stream] = 0;
+			}
+		}
+	}
+
+	spin_unlock(&dev->spinlock);
+}
+
+static void read_in_urb(struct snd_usb_caiaqdev *dev,
+			const struct urb *urb,
+			const struct usb_iso_packet_descriptor *iso)
+{
+	if (!dev->streaming)
+		return;
+
+	switch (dev->spec.data_alignment) {
+	case 0:
+		read_in_urb_mode0(dev, urb, iso);
+		break;
+	case 2:
+		read_in_urb_mode2(dev, urb, iso);
+		break;
+	}
+
+	if (dev->input_panic || dev->output_panic) {
+		debug("streaming error detected %s %s\n", 
+				dev->input_panic ? "(input)" : "",
+				dev->output_panic ? "(output)" : "");
+	}
+
+	check_for_elapsed_periods(dev, dev->sub_capture);
+}
+
+static void fill_out_urb(struct snd_usb_caiaqdev *dev, 
+			 struct urb *urb, 
+			 const struct usb_iso_packet_descriptor *iso)
+{
+	unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+	struct snd_pcm_substream *sub;
+	int stream, i;
+
+	spin_lock(&dev->spinlock);
+	
+	for (i = 0; i < iso->length;) {
+		for (stream = 0; stream < dev->n_streams; stream++, i++) {
+			sub = dev->sub_playback[stream];
+			if (sub) {
+				struct snd_pcm_runtime *rt = sub->runtime;
+				char *audio_buf = rt->dma_area;
+				int sz = frames_to_bytes(rt, rt->buffer_size);
+				usb_buf[i] =
+					audio_buf[dev->audio_out_buf_pos[stream]];
+				dev->period_out_count[stream]++;
+				dev->audio_out_buf_pos[stream]++;
+				if (dev->audio_out_buf_pos[stream] == sz)
+					dev->audio_out_buf_pos[stream] = 0;
+			} else
+				usb_buf[i] = 0;
+		}
+
+		/* fill in the check bytes */
+		if (dev->spec.data_alignment == 2 &&
+		    i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 
+		    	(dev->n_streams * CHANNELS_PER_STREAM))
+		    for (stream = 0; stream < dev->n_streams; stream++, i++)
+		    	usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i);
+	}
+
+	spin_unlock(&dev->spinlock);
+	check_for_elapsed_periods(dev, dev->sub_playback);
+}
+
+static void read_completed(struct urb *urb)
+{
+	struct snd_usb_caiaq_cb_info *info = urb->context; 
+	struct snd_usb_caiaqdev *dev;
+	struct urb *out;
+	int frame, len, send_it = 0, outframe = 0;
+
+	if (urb->status || !info)
+		return;
+
+	dev = info->dev;
+	if (!dev->streaming)
+		return;
+
+	out = dev->data_urbs_out[info->index];
+
+	/* read the recently received packet and send back one which has
+	 * the same layout */
+	for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+		if (urb->iso_frame_desc[frame].status)
+			continue;
+
+		len = urb->iso_frame_desc[outframe].actual_length;
+		out->iso_frame_desc[outframe].length = len;
+		out->iso_frame_desc[outframe].actual_length = 0;
+		out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
+		
+		if (len > 0) {
+			fill_out_urb(dev, out, &out->iso_frame_desc[outframe]);
+			read_in_urb(dev, urb, &urb->iso_frame_desc[frame]);
+			send_it = 1;
+		}
+
+		outframe++;
+	}
+
+	if (send_it) {
+		out->number_of_packets = FRAMES_PER_URB;
+		out->transfer_flags = URB_ISO_ASAP;
+		usb_submit_urb(out, GFP_ATOMIC);
+	}
+	
+	/* re-submit inbound urb */
+	for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+		urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
+		urb->iso_frame_desc[frame].length = BYTES_PER_FRAME;
+		urb->iso_frame_desc[frame].actual_length = 0;
+	}
+	
+	urb->number_of_packets = FRAMES_PER_URB;
+	urb->transfer_flags = URB_ISO_ASAP;
+	usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static void write_completed(struct urb *urb)
+{
+	struct snd_usb_caiaq_cb_info *info = urb->context;
+	struct snd_usb_caiaqdev *dev = info->dev;
+
+	if (!dev->output_running) {
+		dev->output_running = 1;
+		wake_up(&dev->prepare_wait_queue);
+	}
+}
+
+static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
+{
+	int i, frame;
+	struct urb **urbs;
+	struct usb_device *usb_dev = dev->chip.dev;
+	unsigned int pipe;
+
+	pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ? 
+		usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) :
+		usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE);
+
+	urbs = kmalloc(N_URBS * sizeof(*urbs), GFP_KERNEL);
+	if (!urbs) {
+		log("unable to kmalloc() urbs, OOM!?\n");
+		*ret = -ENOMEM;
+		return NULL;
+	}
+
+	for (i = 0; i < N_URBS; i++) {
+		urbs[i] = usb_alloc_urb(FRAMES_PER_URB, GFP_KERNEL);
+		if (!urbs[i]) {
+			log("unable to usb_alloc_urb(), OOM!?\n");
+			*ret = -ENOMEM;
+			return urbs;
+		}
+
+		urbs[i]->transfer_buffer = 
+			kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
+		if (!urbs[i]->transfer_buffer) {
+			log("unable to kmalloc() transfer buffer, OOM!?\n");
+			*ret = -ENOMEM;
+			return urbs;
+		}
+		
+		for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+			struct usb_iso_packet_descriptor *iso = 
+				&urbs[i]->iso_frame_desc[frame];
+			
+			iso->offset = BYTES_PER_FRAME * frame;
+			iso->length = BYTES_PER_FRAME;
+		}
+		
+		urbs[i]->dev = usb_dev;
+		urbs[i]->pipe = pipe;
+		urbs[i]->transfer_buffer_length = FRAMES_PER_URB 
+						* BYTES_PER_FRAME;
+		urbs[i]->context = &dev->data_cb_info[i];
+		urbs[i]->interval = 1;
+		urbs[i]->transfer_flags = URB_ISO_ASAP;
+		urbs[i]->number_of_packets = FRAMES_PER_URB;
+		urbs[i]->complete = (dir == SNDRV_PCM_STREAM_CAPTURE) ?
+					read_completed : write_completed;
+	}
+
+	*ret = 0;
+	return urbs;
+}
+
+static void free_urbs(struct urb **urbs)
+{
+	int i;
+
+	if (!urbs)
+		return;
+
+	for (i = 0; i < N_URBS; i++) {
+		if (!urbs[i])
+			continue;
+		
+		usb_kill_urb(urbs[i]);
+		kfree(urbs[i]->transfer_buffer);
+		usb_free_urb(urbs[i]);
+	}
+
+	kfree(urbs);
+}
+
+int __devinit snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
+{
+	int i, ret;
+
+	dev->n_audio_in  = max(dev->spec.num_analog_audio_in, 
+			       dev->spec.num_digital_audio_in) / 
+				CHANNELS_PER_STREAM;
+	dev->n_audio_out = max(dev->spec.num_analog_audio_out,
+			       dev->spec.num_digital_audio_out) / 
+				CHANNELS_PER_STREAM;
+	dev->n_streams = max(dev->n_audio_in, dev->n_audio_out);
+
+	debug("dev->n_audio_in = %d\n", dev->n_audio_in);
+	debug("dev->n_audio_out = %d\n", dev->n_audio_out);
+	debug("dev->n_streams = %d\n", dev->n_streams);
+
+	if (dev->n_streams > MAX_STREAMS) {
+		log("unable to initialize device, too many streams.\n");
+		return -EINVAL;
+	}
+
+	ret = snd_pcm_new(dev->chip.card, dev->product_name, 0, 
+			dev->n_audio_out, dev->n_audio_in, &dev->pcm);
+
+	if (ret < 0) {
+		log("snd_pcm_new() returned %d\n", ret);
+		return ret;
+	}
+
+	dev->pcm->private_data = dev;
+	strcpy(dev->pcm->name, dev->product_name);
+
+	memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
+	memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
+	
+	memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware,
+			sizeof(snd_usb_caiaq_pcm_hardware));
+
+	/* setup samplerates */
+	dev->samplerates = dev->pcm_info.rates;
+	switch (dev->chip.usb_id) {
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+		dev->samplerates |= SNDRV_PCM_RATE_88200;
+		dev->samplerates |= SNDRV_PCM_RATE_192000;
+		break;
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
+		dev->samplerates |= SNDRV_PCM_RATE_88200;
+		break;
+	}
+
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK, 
+				&snd_usb_caiaq_ops);
+	snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE, 
+				&snd_usb_caiaq_ops);
+
+	snd_pcm_lib_preallocate_pages_for_all(dev->pcm,
+					SNDRV_DMA_TYPE_CONTINUOUS,
+					snd_dma_continuous_data(GFP_KERNEL),
+					MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
+
+	dev->data_cb_info =
+		kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS, 
+					GFP_KERNEL);
+
+	if (!dev->data_cb_info)
+		return -ENOMEM;
+
+	for (i = 0; i < N_URBS; i++) {
+		dev->data_cb_info[i].dev = dev;
+		dev->data_cb_info[i].index = i;
+	}
+	
+	dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret);
+	if (ret < 0) {
+		kfree(dev->data_cb_info);
+		free_urbs(dev->data_urbs_in);
+		return ret;
+	}
+	
+	dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret);
+	if (ret < 0) {
+		kfree(dev->data_cb_info);
+		free_urbs(dev->data_urbs_in);
+		free_urbs(dev->data_urbs_out);
+		return ret;
+	}
+
+	return 0;
+}
+
+void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev)
+{
+	debug("snd_usb_caiaq_audio_free (%p)\n", dev);
+	stream_stop(dev);
+	free_urbs(dev->data_urbs_in);
+	free_urbs(dev->data_urbs_out);
+	kfree(dev->data_cb_info);
+}
+
diff --git a/sound/usb/caiaq/caiaq-audio.h b/sound/usb/caiaq/caiaq-audio.h
new file mode 100644
index 000000000000..8ab1f8d9529e
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-audio.h
@@ -0,0 +1,7 @@
+#ifndef CAIAQ_AUDIO_H
+#define CAIAQ_AUDIO_H
+
+int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev);
+
+#endif /* CAIAQ_AUDIO_H */
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c
new file mode 100644
index 000000000000..4709347326f9
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-device.c
@@ -0,0 +1,436 @@
+/*
+ * caiaq.c: ALSA driver for caiaq/NativeInstruments devices
+ *
+ *   Copyright (c) 2007 Daniel Mack <daniel@caiaq.de>
+ *                      Karsten Wiese <fzu@wemgehoertderstaat.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/rawmidi.h>
+
+#include "caiaq-device.h"
+#include "caiaq-audio.h"
+#include "caiaq-midi.h"
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+#include "caiaq-input.h"
+#endif
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.1.0");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
+			 "{Native Instruments, Kore Controller},"
+			 "{Native Instruments, Audio Kontrol 1}"
+			 "{Native Instruments, Audio 8 DJ}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
+static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
+static int snd_card_used[SNDRV_CARDS];
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for the caiaq sound device");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for the caiaq soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable the caiaq soundcard.");
+
+enum {
+	SAMPLERATE_44100	= 0,
+	SAMPLERATE_48000	= 1,
+	SAMPLERATE_96000	= 2,
+	SAMPLERATE_192000	= 3,
+	SAMPLERATE_88200	= 4,
+	SAMPLERATE_INVALID	= 0xff
+};
+
+enum {
+	DEPTH_NONE	= 0,
+	DEPTH_16	= 1,
+	DEPTH_24	= 2,
+	DEPTH_32	= 3
+};
+
+static struct usb_device_id snd_usb_id_table[] = {
+	{
+		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =	USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =	USB_PID_RIGKONTROL2 
+	},
+	{
+		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =	USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =	USB_PID_KORECONTROLLER
+	},
+	{
+		.match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =    USB_PID_AK1
+	},
+	{
+		.match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =    USB_PID_AUDIO8DJ
+	},
+	{ /* terminator */ }
+};
+
+static void usb_ep1_command_reply_dispatch (struct urb* urb)
+{
+	int ret;
+	struct snd_usb_caiaqdev *dev = urb->context;
+	unsigned char *buf = urb->transfer_buffer;
+
+	if (urb->status || !dev) {
+		log("received EP1 urb->status = %i\n", urb->status);
+		return;
+	}
+
+	switch(buf[0]) {
+	case EP1_CMD_GET_DEVICE_INFO:
+	 	memcpy(&dev->spec, buf+1, sizeof(struct caiaq_device_spec));
+		dev->spec.fw_version = le16_to_cpu(dev->spec.fw_version);
+		debug("device spec (firmware %d): audio: %d in, %d out, "
+			"MIDI: %d in, %d out, data alignment %d\n",
+			dev->spec.fw_version,
+			dev->spec.num_analog_audio_in,
+			dev->spec.num_analog_audio_out,
+			dev->spec.num_midi_in,
+			dev->spec.num_midi_out,
+			dev->spec.data_alignment);
+
+		dev->spec_received++;
+		wake_up(&dev->ep1_wait_queue);
+		break;
+	case EP1_CMD_AUDIO_PARAMS:
+		dev->audio_parm_answer = buf[1];
+		wake_up(&dev->ep1_wait_queue);
+		break;
+	case EP1_CMD_MIDI_READ:
+		snd_usb_caiaq_midi_handle_input(dev, buf[1], buf + 3, buf[2]);
+		break;
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+	case EP1_CMD_READ_ERP:
+	case EP1_CMD_READ_ANALOG:
+	case EP1_CMD_READ_IO:
+		snd_usb_caiaq_input_dispatch(dev, buf, urb->actual_length);
+		break;
+#endif
+	}
+
+	dev->ep1_in_urb.actual_length = 0;
+	ret = usb_submit_urb(&dev->ep1_in_urb, GFP_ATOMIC);
+	if (ret < 0)
+		log("unable to submit urb. OOM!?\n");
+}
+
+static int send_command (struct snd_usb_caiaqdev *dev,
+			 unsigned char command, 
+			 const unsigned char *buffer,
+			 int len)
+{
+	int actual_len;
+	struct usb_device *usb_dev = dev->chip.dev;
+
+	if (!usb_dev)
+		return -EIO;
+
+	if (len > EP1_BUFSIZE - 1)
+		len = EP1_BUFSIZE - 1;
+
+	if (buffer && len > 0)
+		memcpy(dev->ep1_out_buf+1, buffer, len);
+	
+	dev->ep1_out_buf[0] = command;
+	return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
+			   dev->ep1_out_buf, len+1, &actual_len, 200);
+}
+
+int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
+		   		    int rate, int depth, int bpp)
+{
+	int ret;
+	char tmp[5];
+	
+	switch (rate) {
+	case 44100:	tmp[0] = SAMPLERATE_44100;   break;
+	case 48000:	tmp[0] = SAMPLERATE_48000;   break;
+	case 88200:	tmp[0] = SAMPLERATE_88200;   break;
+	case 96000:	tmp[0] = SAMPLERATE_96000;   break;
+	case 192000:	tmp[0] = SAMPLERATE_192000;  break;
+	default:	return -EINVAL;
+	}
+
+	switch (depth) {
+	case 16:	tmp[1] = DEPTH_16;   break;
+	case 24:	tmp[1] = DEPTH_24;   break;
+	default:	return -EINVAL;
+	}
+
+	tmp[2] = bpp & 0xff;
+	tmp[3] = bpp >> 8;
+	tmp[4] = 1; /* packets per microframe */
+
+	debug("setting audio params: %d Hz, %d bits, %d bpp\n",
+		rate, depth, bpp);
+
+	dev->audio_parm_answer = -1;
+	ret = send_command(dev, EP1_CMD_AUDIO_PARAMS, tmp, sizeof(tmp));
+
+	if (ret)
+		return ret;
+	
+	if (!wait_event_timeout(dev->ep1_wait_queue, 
+	    dev->audio_parm_answer >= 0, HZ))
+		return -EPIPE;
+		
+	if (dev->audio_parm_answer != 1) 
+		debug("unable to set the device's audio params\n");
+
+	return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
+}
+
+int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, 
+				int digital, int analog, int erp)
+{
+	char tmp[3] = { digital, analog, erp };
+	return send_command(dev, EP1_CMD_AUTO_MSG, tmp, sizeof(tmp));
+}
+
+static void setup_card(struct snd_usb_caiaqdev *dev)
+{
+	int ret;
+	char val[3];
+	
+	/* device-specific startup specials */
+	switch (dev->chip.usb_id) {
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+		/* RigKontrol2 - display centered dash ('-') */
+		val[0] = 0x00;
+		val[1] = 0x00;
+		val[2] = 0x01;
+		send_command(dev, EP1_CMD_WRITE_IO, val, 3);
+		break;
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+		/* Audio Kontrol 1 - make USB-LED stop blinking */
+		val[0] = 0x00;
+		send_command(dev, EP1_CMD_WRITE_IO, val, 1);
+		break;
+	}
+	
+	ret = snd_usb_caiaq_audio_init(dev);
+	if (ret < 0)
+		log("Unable to set up audio system (ret=%d)\n", ret);
+	
+	ret = snd_usb_caiaq_midi_init(dev);
+	if (ret < 0)
+		log("Unable to set up MIDI system (ret=%d)\n", ret);
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+	ret = snd_usb_caiaq_input_init(dev);
+	if (ret < 0)
+		log("Unable to set up input system (ret=%d)\n", ret);
+#endif
+
+	/* finally, register the card and all its sub-instances */
+	ret = snd_card_register(dev->chip.card);
+	if (ret < 0) {
+		log("snd_card_register() returned %d\n", ret);
+		snd_card_free(dev->chip.card);
+	}
+}
+
+static struct snd_card* create_card(struct usb_device* usb_dev)
+{
+	int devnum;
+	struct snd_card *card;
+	struct snd_usb_caiaqdev *dev;
+
+	for (devnum = 0; devnum < SNDRV_CARDS; devnum++)
+		if (enable[devnum] && !snd_card_used[devnum])
+			break;
+
+	if (devnum >= SNDRV_CARDS)
+		return NULL;
+
+	card = snd_card_new(index[devnum], id[devnum], THIS_MODULE, 
+					sizeof(struct snd_usb_caiaqdev));
+	if (!card)
+		return NULL;
+
+	dev = caiaqdev(card);
+	dev->chip.dev = usb_dev;
+	dev->chip.card = card;
+	dev->chip.usb_id = USB_ID(usb_dev->descriptor.idVendor,
+					usb_dev->descriptor.idProduct);
+	spin_lock_init(&dev->spinlock);
+	snd_card_set_dev(card, &usb_dev->dev);
+
+	return card;
+}
+
+static int init_card(struct snd_usb_caiaqdev *dev)
+{
+	char *c;
+	struct usb_device *usb_dev = dev->chip.dev;
+	struct snd_card *card = dev->chip.card;
+	int err, len;
+	
+	if (usb_set_interface(usb_dev, 0, 1) != 0) {
+		log("can't set alt interface.\n");
+		return -EIO;
+	}
+
+	usb_init_urb(&dev->ep1_in_urb);
+	usb_init_urb(&dev->midi_out_urb);
+
+	usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev, 
+			  usb_rcvbulkpipe(usb_dev, 0x1),
+			  dev->ep1_in_buf, EP1_BUFSIZE, 
+			  usb_ep1_command_reply_dispatch, dev);
+
+	usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev, 
+			  usb_sndbulkpipe(usb_dev, 0x1),
+			  dev->midi_out_buf, EP1_BUFSIZE, 
+			  snd_usb_caiaq_midi_output_done, dev);
+	
+	init_waitqueue_head(&dev->ep1_wait_queue);
+	init_waitqueue_head(&dev->prepare_wait_queue);
+	
+	if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
+		return -EIO;
+
+	err = send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
+	if (err)
+		return err;
+
+	if (!wait_event_timeout(dev->ep1_wait_queue, dev->spec_received, HZ))
+		return -ENODEV;
+
+	usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
+		   dev->vendor_name, CAIAQ_USB_STR_LEN);
+	
+	usb_string(usb_dev, usb_dev->descriptor.iProduct,
+		   dev->product_name, CAIAQ_USB_STR_LEN);
+	
+	usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
+		   dev->serial, CAIAQ_USB_STR_LEN);
+
+	/* terminate serial string at first white space occurence */
+	c = strchr(dev->serial, ' ');
+	if (c)
+		*c = '\0';
+	
+	strcpy(card->driver, MODNAME);
+	strcpy(card->shortname, dev->product_name);
+
+	len = snprintf(card->longname, sizeof(card->longname),
+		       "%s %s (serial %s, ",
+		       dev->vendor_name, dev->product_name, dev->serial);
+
+	if (len < sizeof(card->longname) - 2)
+		len += usb_make_path(usb_dev, card->longname + len,
+				     sizeof(card->longname) - len);
+
+	card->longname[len++] = ')';
+	card->longname[len] = '\0';
+	setup_card(dev);
+	return 0;
+}
+
+static int snd_probe(struct usb_interface *intf, 
+		     const struct usb_device_id *id)
+{
+	int ret;
+	struct snd_card *card;
+	struct usb_device *device = interface_to_usbdev(intf);
+	
+	card = create_card(device);
+	
+	if (!card)
+		return -ENOMEM;
+			
+	dev_set_drvdata(&intf->dev, card);
+	ret = init_card(caiaqdev(card));
+	if (ret < 0) {
+		log("unable to init card! (ret=%d)\n", ret);
+		snd_card_free(card);
+		return ret;
+	}
+	
+	return 0;
+}
+
+static void snd_disconnect(struct usb_interface *intf)
+{
+	struct snd_usb_caiaqdev *dev;
+	struct snd_card *card = dev_get_drvdata(&intf->dev);
+
+	debug("snd_disconnect(%p)\n", intf);
+
+	if (!card)
+		return;
+
+	dev = caiaqdev(card);
+	snd_card_disconnect(card);
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+	snd_usb_caiaq_input_free(dev);
+#endif
+	snd_usb_caiaq_audio_free(dev);
+	
+	usb_kill_urb(&dev->ep1_in_urb);
+	usb_kill_urb(&dev->midi_out_urb);
+	
+	snd_card_free(card);
+	usb_reset_device(interface_to_usbdev(intf));
+}
+
+
+MODULE_DEVICE_TABLE(usb, snd_usb_id_table);
+static struct usb_driver snd_usb_driver = {
+	.name 		= MODNAME,
+	.probe 		= snd_probe,
+	.disconnect	= snd_disconnect,
+	.id_table 	= snd_usb_id_table,
+};
+
+static int __init snd_module_init(void)
+{
+	return usb_register(&snd_usb_driver);
+}
+
+static void __exit snd_module_exit(void)
+{
+	usb_deregister(&snd_usb_driver);
+}
+
+module_init(snd_module_init)
+module_exit(snd_module_exit)
+
diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/caiaq-device.h
new file mode 100644
index 000000000000..088d5ec241f3
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-device.h
@@ -0,0 +1,116 @@
+#ifndef CAIAQ_DEVICE_H
+#define CAIAQ_DEVICE_H
+
+#include "../usbaudio.h"
+
+#define USB_VID_NATIVEINSTRUMENTS 0x17cc
+
+#define USB_PID_RIGKONTROL2	0x1969
+#define USB_PID_KORECONTROLLER 	0x4711
+#define USB_PID_AK1		0x0815
+#define USB_PID_AUDIO8DJ	0x1978
+
+#define EP1_BUFSIZE 64
+#define CAIAQ_USB_STR_LEN 0xff
+#define MAX_STREAMS 32
+
+//#define	SND_USB_CAIAQ_DEBUG
+
+#define MODNAME "snd-usb-caiaq"
+#define log(x...) snd_printk(KERN_WARNING MODNAME" log: " x)
+
+#ifdef SND_USB_CAIAQ_DEBUG
+#define debug(x...) snd_printk(KERN_WARNING MODNAME " debug: " x)
+#else
+#define debug(x...) do { } while(0)
+#endif
+
+#define EP1_CMD_GET_DEVICE_INFO	0x1
+#define EP1_CMD_READ_ERP	0x2
+#define EP1_CMD_READ_ANALOG	0x3
+#define EP1_CMD_READ_IO		0x4
+#define EP1_CMD_WRITE_IO	0x5
+#define EP1_CMD_MIDI_READ	0x6
+#define EP1_CMD_MIDI_WRITE	0x7
+#define EP1_CMD_AUDIO_PARAMS	0x9
+#define EP1_CMD_AUTO_MSG	0xb
+
+struct caiaq_device_spec {
+	unsigned short fw_version;
+	unsigned char hw_subtype;
+	unsigned char num_erp;
+	unsigned char num_analog_in;
+	unsigned char num_digital_in;
+	unsigned char num_digital_out;
+	unsigned char num_analog_audio_out;
+	unsigned char num_analog_audio_in;
+	unsigned char num_digital_audio_out;
+	unsigned char num_digital_audio_in;
+	unsigned char num_midi_out;
+	unsigned char num_midi_in;
+	unsigned char data_alignment;
+} __attribute__ ((packed));
+
+struct snd_usb_caiaq_cb_info;
+
+struct snd_usb_caiaqdev {
+	struct snd_usb_audio chip;
+
+	struct urb ep1_in_urb;
+	struct urb midi_out_urb;
+	struct urb **data_urbs_in;
+	struct urb **data_urbs_out;
+	struct snd_usb_caiaq_cb_info *data_cb_info;
+	
+	unsigned char ep1_in_buf[EP1_BUFSIZE];
+	unsigned char ep1_out_buf[EP1_BUFSIZE];
+	unsigned char midi_out_buf[EP1_BUFSIZE];
+
+	struct caiaq_device_spec spec;
+	spinlock_t spinlock;
+	wait_queue_head_t ep1_wait_queue;
+	wait_queue_head_t prepare_wait_queue;
+	int spec_received, audio_parm_answer;
+	
+	char vendor_name[CAIAQ_USB_STR_LEN];
+	char product_name[CAIAQ_USB_STR_LEN];
+	char serial[CAIAQ_USB_STR_LEN];
+
+	int n_streams, n_audio_in, n_audio_out;
+	int streaming, first_packet, output_running;
+	int audio_in_buf_pos[MAX_STREAMS];
+	int audio_out_buf_pos[MAX_STREAMS];
+	int period_in_count[MAX_STREAMS];
+	int period_out_count[MAX_STREAMS];
+	int input_panic, output_panic;
+	char *audio_in_buf, *audio_out_buf;
+	unsigned int samplerates;
+
+	struct snd_pcm_substream *sub_playback[MAX_STREAMS];
+	struct snd_pcm_substream *sub_capture[MAX_STREAMS];
+
+	/* Linux input */
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+	struct input_dev *input_dev;
+#endif
+	
+	/* ALSA */
+	struct snd_pcm *pcm;
+	struct snd_pcm_hardware pcm_info;
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *midi_receive_substream;
+	struct snd_rawmidi_substream *midi_out_substream;
+};
+
+struct snd_usb_caiaq_cb_info {
+	struct snd_usb_caiaqdev *dev;
+	int index;
+};
+
+#define caiaqdev(c) ((struct snd_usb_caiaqdev*)(c)->private_data)
+
+int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, int rate, int depth, int bbp);
+int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, int digital, int analog, int erp);
+
+
+#endif /* CAIAQ_DEVICE_H */
diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/caiaq-input.c
new file mode 100644
index 000000000000..3acd12db6952
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-input.c
@@ -0,0 +1,246 @@
+/*
+ *   Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/spinlock.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+#include <sound/pcm.h>
+#include "caiaq-device.h"
+#include "caiaq-input.h"
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+
+static unsigned char keycode_ak1[] =  { KEY_C, KEY_B, KEY_A };
+static unsigned char keycode_rk2[] =  { KEY_1, KEY_2, KEY_3, KEY_4, 
+					KEY_5, KEY_6, KEY_7 };
+
+#define DEG90  (range/2)
+#define DEG180 (range)
+#define DEG270 (DEG90 + DEG180)
+#define DEG360 (DEG180 * 2)
+#define HIGH_PEAK (268)
+#define LOW_PEAK (-7)
+
+/* some of these devices have endless rotation potentiometers
+ * built in which use two tapers, 90 degrees phase shifted.
+ * this algorithm decodes them to one single value, ranging
+ * from 0 to 999 */
+static unsigned int decode_erp(unsigned char a, unsigned char b)
+{
+	int weight_a, weight_b;
+	int pos_a, pos_b;
+	int ret;
+	int range = HIGH_PEAK - LOW_PEAK;
+	int mid_value = (HIGH_PEAK + LOW_PEAK) / 2;
+
+	weight_b = abs(mid_value-a) - (range/2 - 100)/2;
+	
+	if (weight_b < 0)
+		weight_b = 0;
+
+	if (weight_b > 100)
+		weight_b = 100;
+
+	weight_a = 100 - weight_b;
+
+	if (a < mid_value) {
+		/* 0..90 and 270..360 degrees */
+		pos_b = b - LOW_PEAK + DEG270;
+		if (pos_b >= DEG360)
+			pos_b -= DEG360;
+	} else
+		/* 90..270 degrees */
+		pos_b = HIGH_PEAK - b + DEG90;
+
+
+	if (b > mid_value)
+		/* 0..180 degrees */
+		pos_a = a - LOW_PEAK;
+	else
+		/* 180..360 degrees */
+		pos_a = HIGH_PEAK - a + DEG180;
+
+	/* interpolate both slider values, depending on weight factors */
+	/* 0..99 x DEG360 */
+	ret = pos_a * weight_a + pos_b * weight_b;
+
+	/* normalize to 0..999 */
+	ret *= 10;
+	ret /= DEG360;
+
+	if (ret < 0)
+		ret += 1000;
+	
+	if (ret >= 1000)
+		ret -= 1000;
+
+	return ret;
+}
+
+#undef DEG90
+#undef DEG180
+#undef DEG270
+#undef DEG360
+#undef HIGH_PEAK
+#undef LOW_PEAK
+
+
+static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev, 
+					const char *buf, unsigned int len)
+{
+	switch(dev->input_dev->id.product) {
+	case USB_PID_RIGKONTROL2:
+		input_report_abs(dev->input_dev, ABS_X, (buf[4] << 8) |buf[5]);
+		input_report_abs(dev->input_dev, ABS_Y, (buf[0] << 8) |buf[1]);
+		input_report_abs(dev->input_dev, ABS_Z, (buf[2] << 8) |buf[3]);
+		input_sync(dev->input_dev);
+		break;
+	}
+}
+
+static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev, 
+				     const char *buf, unsigned int len)
+{
+	int i;
+
+	switch(dev->input_dev->id.product) {
+	case USB_PID_AK1:
+		i = decode_erp(buf[0], buf[1]);
+		input_report_abs(dev->input_dev, ABS_X, i);
+		input_sync(dev->input_dev);	
+		break;
+	}
+}
+
+static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev, 
+				    char *buf, unsigned int len)
+{
+	int i;
+	unsigned char *keycode = dev->input_dev->keycode;
+
+	if (!keycode)
+		return;
+
+	if (dev->input_dev->id.product == USB_PID_RIGKONTROL2)
+		for (i=0; i<len; i++)
+			buf[i] = ~buf[i];
+
+	for (i=0; (i<dev->input_dev->keycodemax) && (i < len); i++)
+		input_report_key(dev->input_dev, keycode[i], 
+					buf[i/8] & (1 << (i%8)));
+
+	input_sync(dev->input_dev);
+}
+
+void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, 
+				  char *buf, 
+				  unsigned int len)
+{
+	if (!dev->input_dev || (len < 1))
+		return;
+
+	switch (buf[0]) {
+	case EP1_CMD_READ_ANALOG:
+		snd_caiaq_input_read_analog(dev, buf+1, len-1);
+		break;
+	case EP1_CMD_READ_ERP:
+		snd_caiaq_input_read_erp(dev, buf+1, len-1);
+		break;
+	case EP1_CMD_READ_IO:
+		snd_caiaq_input_read_io(dev, buf+1, len-1);
+		break;
+	}
+}
+
+int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
+{
+	struct usb_device *usb_dev = dev->chip.dev;
+	struct input_dev *input;
+	int i, ret;
+
+	input = input_allocate_device();
+	if (!input)
+		return -ENOMEM;
+
+	input->name = dev->product_name;
+	input->id.bustype = BUS_USB;
+	input->id.vendor  = usb_dev->descriptor.idVendor;
+	input->id.product = usb_dev->descriptor.idProduct;
+	input->id.version = usb_dev->descriptor.bcdDevice;
+
+        switch (dev->chip.usb_id) {
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+		input->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+		input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_Z);
+		input->keycode = keycode_rk2;
+		input->keycodesize = sizeof(char);
+		input->keycodemax = ARRAY_SIZE(keycode_rk2);
+		for (i=0; i<ARRAY_SIZE(keycode_rk2); i++)
+			set_bit(keycode_rk2[i], input->keybit);
+
+		input_set_abs_params(input, ABS_X, 0, 4096, 0, 10);
+		input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10);
+		input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10);
+		snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
+		break;
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+		input->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+		input->absbit[0] = BIT(ABS_X);
+		input->keycode = keycode_ak1;
+		input->keycodesize = sizeof(char);
+		input->keycodemax = ARRAY_SIZE(keycode_ak1);
+		for (i=0; i<ARRAY_SIZE(keycode_ak1); i++)
+			set_bit(keycode_ak1[i], input->keybit);
+
+		input_set_abs_params(input, ABS_X, 0, 999, 0, 10);
+		snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5);
+		break;
+	default:
+		/* no input methods supported on this device */
+		input_free_device(input);
+		return 0;
+	}
+
+	ret = input_register_device(input);
+	if (ret < 0) {
+		input_free_device(input);
+		return ret;
+	}
+
+	dev->input_dev = input;
+	return 0;
+}
+
+void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev)
+{
+	if (!dev || !dev->input_dev)
+		return;
+
+	input_unregister_device(dev->input_dev);
+	input_free_device(dev->input_dev);
+	dev->input_dev = NULL;
+}
+
+#endif /* CONFIG_SND_USB_CAIAQ_INPUT */
+
diff --git a/sound/usb/caiaq/caiaq-input.h b/sound/usb/caiaq/caiaq-input.h
new file mode 100644
index 000000000000..ced535577864
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-input.h
@@ -0,0 +1,8 @@
+#ifndef CAIAQ_INPUT_H
+#define CAIAQ_INPUT_H
+
+void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, char *buf, unsigned int len);
+int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev);
+
+#endif
diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/caiaq-midi.c
new file mode 100644
index 000000000000..793ca20ce349
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-midi.c
@@ -0,0 +1,177 @@
+/*
+ *   Copyright (c) 2006,2007 Daniel Mack
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+#include <sound/pcm.h>
+
+#include "caiaq-device.h"
+#include "caiaq-midi.h"
+
+
+static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int snd_usb_caiaq_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+
+	if (!dev)
+		return;
+	
+	dev->midi_receive_substream = up ? substream : NULL;
+}
+
+
+static int snd_usb_caiaq_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int snd_usb_caiaq_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
+				    struct snd_rawmidi_substream *substream)
+{
+	int len, ret;
+	
+	dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
+	dev->midi_out_buf[1] = 0; /* port */
+	len = snd_rawmidi_transmit_peek(substream, dev->midi_out_buf+3, EP1_BUFSIZE-3);
+	
+	if (len <= 0)
+		return;
+	
+	dev->midi_out_buf[2] = len;
+	dev->midi_out_urb.transfer_buffer_length = len+3;
+	
+	ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
+	if (ret < 0)
+		log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed, %d\n",
+				substream, ret);
+}
+
+static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+	
+	if (dev->midi_out_substream != NULL)
+		return;
+	
+	if (!up) {
+		dev->midi_out_substream = NULL;
+		return;
+	}
+	
+	dev->midi_out_substream = substream;
+	snd_usb_caiaq_midi_send(dev, substream);
+}
+
+
+static struct snd_rawmidi_ops snd_usb_caiaq_midi_output =
+{
+	.open =		snd_usb_caiaq_midi_output_open,
+	.close =	snd_usb_caiaq_midi_output_close,
+	.trigger =      snd_usb_caiaq_midi_output_trigger,
+};
+
+static struct snd_rawmidi_ops snd_usb_caiaq_midi_input =
+{
+	.open =		snd_usb_caiaq_midi_input_open,
+	.close =	snd_usb_caiaq_midi_input_close,
+	.trigger =      snd_usb_caiaq_midi_input_trigger,
+};
+
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, 
+				     int port, const char *buf, int len)
+{
+	if (!dev->midi_receive_substream)
+		return;
+	
+	snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
+}
+
+int __devinit snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
+{
+	int ret;
+	struct snd_rawmidi *rmidi;
+
+	ret = snd_rawmidi_new(device->chip.card, device->product_name, 0,
+					device->spec.num_midi_out,
+					device->spec.num_midi_in,
+					&rmidi);
+
+	if (ret < 0)
+		return ret;
+
+	strcpy(rmidi->name, device->product_name);
+
+	rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
+	rmidi->private_data = device;
+
+	if (device->spec.num_midi_out > 0) {
+		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, 
+				    &snd_usb_caiaq_midi_output);
+	}
+
+	if (device->spec.num_midi_in > 0) {
+		rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
+		snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, 
+				    &snd_usb_caiaq_midi_input);
+	}
+	
+	device->rmidi = rmidi;
+
+	return 0;
+}
+
+void snd_usb_caiaq_midi_output_done(struct urb* urb)
+{
+	struct snd_usb_caiaqdev *dev = urb->context;
+      	char *buf = urb->transfer_buffer;
+	
+	if (urb->status != 0)
+		return;
+
+	if (!dev->midi_out_substream)
+		return;
+
+	snd_rawmidi_transmit_ack(dev->midi_out_substream, buf[2]);
+	dev->midi_out_substream = NULL;
+	snd_usb_caiaq_midi_send(dev, dev->midi_out_substream);
+}
+
diff --git a/sound/usb/caiaq/caiaq-midi.h b/sound/usb/caiaq/caiaq-midi.h
new file mode 100644
index 000000000000..9d16db027fc3
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-midi.h
@@ -0,0 +1,8 @@
+#ifndef CAIAQ_MIDI_H
+#define CAIAQ_MIDI_H
+
+int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
+void snd_usb_caiaq_midi_output_done(struct urb* urb);
+
+#endif /* CAIAQ_MIDI_H */
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index b6d886373bb0..8ebc1adb5ed9 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -1878,6 +1878,9 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre
 	}
 
 	/* set the period time minimum 1ms */
+	/* FIXME: high-speed mode allows 125us minimum period, but many parts
+	 * in the current code assume the 1ms period.
+	 */
 	snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME,
 				     1000 * MIN_PACKS_URB,
 				     /*(nrpacks * MAX_URBS) * 1000*/ UINT_MAX);
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 24f5a26c5f0c..99295f9b7691 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1,7 +1,7 @@
 /*
  * usbmidi.c - ALSA USB MIDI driver
  *
- * Copyright (c) 2002-2005 Clemens Ladisch
+ * Copyright (c) 2002-2007 Clemens Ladisch
  * All rights reserved.
  *
  * Based on the OSS usb-midi driver by NAGANO Daisuke,
@@ -145,6 +145,7 @@ struct snd_usb_midi_in_endpoint {
 	struct urb* urb;
 	struct usbmidi_in_port {
 		struct snd_rawmidi_substream *substream;
+		u8 running_status_length;
 	} ports[0x10];
 	u8 seen_f5;
 	u8 error_resubmit;
@@ -366,6 +367,46 @@ static void snd_usbmidi_midiman_input(struct snd_usb_midi_in_endpoint* ep,
 }
 
 /*
+ * Buggy M-Audio device: running status on input results in a packet that has
+ * the data bytes but not the status byte and that is marked with CIN 4.
+ */
+static void snd_usbmidi_maudio_broken_running_status_input(
+					struct snd_usb_midi_in_endpoint* ep,
+					uint8_t* buffer, int buffer_length)
+{
+	int i;
+
+	for (i = 0; i + 3 < buffer_length; i += 4)
+		if (buffer[i] != 0) {
+			int cable = buffer[i] >> 4;
+			u8 cin = buffer[i] & 0x0f;
+			struct usbmidi_in_port *port = &ep->ports[cable];
+			int length;
+			
+			length = snd_usbmidi_cin_length[cin];
+			if (cin == 0xf && buffer[i + 1] >= 0xf8)
+				; /* realtime msg: no running status change */
+			else if (cin >= 0x8 && cin <= 0xe)
+				/* channel msg */
+				port->running_status_length = length - 1;
+			else if (cin == 0x4 &&
+				 port->running_status_length != 0 &&
+				 buffer[i + 1] < 0x80)
+				/* CIN 4 that is not a SysEx */
+				length = port->running_status_length;
+			else
+				/*
+				 * All other msgs cannot begin running status.
+				 * (A channel msg sent as two or three CIN 0xF
+				 * packets could in theory, but this device
+				 * doesn't use this format.)
+				 */
+				port->running_status_length = 0;
+			snd_usbmidi_input_data(ep, cable, &buffer[i + 1], length);
+		}
+}
+
+/*
  * Adds one USB MIDI packet to the output buffer.
  */
 static void snd_usbmidi_output_standard_packet(struct urb* urb, uint8_t p0,
@@ -525,6 +566,12 @@ static struct usb_protocol_ops snd_usbmidi_midiman_ops = {
 	.output_packet = snd_usbmidi_output_midiman_packet,
 };
 
+static struct usb_protocol_ops snd_usbmidi_maudio_broken_running_status_ops = {
+	.input = snd_usbmidi_maudio_broken_running_status_input,
+	.output = snd_usbmidi_standard_output, 
+	.output_packet = snd_usbmidi_output_standard_packet,
+};
+
 /*
  * Novation USB MIDI protocol: number of data bytes is in the first byte
  * (when receiving) (+1!) or in the second byte (when sending); data begins
@@ -918,7 +965,11 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi* umidi,
 	}
 	/* we never use interrupt output pipes */
 	pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep);
-	ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1);
+	if (umidi->chip->usb_id == USB_ID(0x0a92, 0x1020)) /* ESI M4U */
+		/* FIXME: we need more URBs to get reasonable bandwidth here: */
+		ep->max_transfer = 4;
+	else
+		ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1);
 	buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer,
 				  GFP_KERNEL, &ep->urb->transfer_dma);
 	if (!buffer) {
@@ -1606,6 +1657,9 @@ int snd_usb_create_midi_interface(struct snd_usb_audio* chip,
 	switch (quirk ? quirk->type : QUIRK_MIDI_STANDARD_INTERFACE) {
 	case QUIRK_MIDI_STANDARD_INTERFACE:
 		err = snd_usbmidi_get_ms_info(umidi, endpoints);
+		if (chip->usb_id == USB_ID(0x0763, 0x0150)) /* M-Audio Uno */
+			umidi->usb_protocol_ops =
+				&snd_usbmidi_maudio_broken_running_status_ops;
 		break;
 	case QUIRK_MIDI_FIXED_ENDPOINT:
 		memcpy(&endpoints[0], quirk->data,
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 858262068f4f..8fcbe93b2589 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -40,6 +40,29 @@
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC
 
 /*
+ * Logitech QuickCam: bDeviceClass is vendor-specific, so generic interface
+ * class matches do not take effect without an explicit ID match.
+ */
+{
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.idVendor = 0x046d,
+	.idProduct = 0x08f0,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+},
+{
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.idVendor = 0x046d,
+	.idProduct = 0x08f6,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+},
+
+/*
  * Yamaha devices
  */