1338 files changed, 87098 insertions, 17127 deletions

diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm
new file mode 100644
index 000000000000..5389440aade3
--- /dev/null
+++ b/Documentation/arm/OMAP/omap_pm
@@ -0,0 +1,129 @@
+
+The OMAP PM interface
+=====================
+
+This document describes the temporary OMAP PM interface.  Driver
+authors use these functions to communicate minimum latency or
+throughput constraints to the kernel power management code.
+Over time, the intention is to merge features from the OMAP PM
+interface into the Linux PM QoS code.
+
+Drivers need to express PM parameters which:
+
+- support the range of power management parameters present in the TI SRF;
+
+- separate the drivers from the underlying PM parameter
+  implementation, whether it is the TI SRF or Linux PM QoS or Linux
+  latency framework or something else;
+
+- specify PM parameters in terms of fundamental units, such as
+  latency and throughput, rather than units which are specific to OMAP
+  or to particular OMAP variants;
+
+- allow drivers which are shared with other architectures (e.g.,
+  DaVinci) to add these constraints in a way which won't affect non-OMAP
+  systems,
+
+- can be implemented immediately with minimal disruption of other
+  architectures.
+
+
+This document proposes the OMAP PM interface, including the following
+five power management functions for driver code:
+
+1. Set the maximum MPU wakeup latency:
+   (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
+
+2. Set the maximum device wakeup latency:
+   (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
+
+3. Set the maximum system DMA transfer start latency (CORE pwrdm):
+   (*pdata->set_max_sdma_lat)(struct device *dev, long t)
+
+4. Set the minimum bus throughput needed by a device:
+   (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
+
+5. Return the number of times the device has lost context
+   (*pdata->get_dev_context_loss_count)(struct device *dev)
+
+
+Further documentation for all OMAP PM interface functions can be
+found in arch/arm/plat-omap/include/mach/omap-pm.h.
+
+
+The OMAP PM layer is intended to be temporary
+---------------------------------------------
+
+The intention is that eventually the Linux PM QoS layer should support
+the range of power management features present in OMAP3.  As this
+happens, existing drivers using the OMAP PM interface can be modified
+to use the Linux PM QoS code; and the OMAP PM interface can disappear.
+
+
+Driver usage of the OMAP PM functions
+-------------------------------------
+
+As the 'pdata' in the above examples indicates, these functions are
+exposed to drivers through function pointers in driver .platform_data
+structures.  The function pointers are initialized by the board-*.c
+files to point to the corresponding OMAP PM functions:
+.set_max_dev_wakeup_lat will point to
+omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
+not support these functions should leave these function pointers set
+to NULL.  Drivers should use the following idiom:
+
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, t);
+
+The most common usage of these functions will probably be to specify
+the maximum time from when an interrupt occurs, to when the device
+becomes accessible.  To accomplish this, driver writers should use the
+set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup
+latency, and the set_max_dev_wakeup_lat() function to constrain the
+device wakeup latency (from clk_enable() to accessibility).  For
+example,
+
+        /* Limit MPU wakeup latency */
+        if (pdata->set_max_mpu_wakeup_lat)
+            (*pdata->set_max_mpu_wakeup_lat)(dev, tc);
+
+        /* Limit device powerdomain wakeup latency */
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, td);
+
+        /* total wakeup latency in this example: (tc + td) */
+
+The PM parameters can be overwritten by calling the function again
+with the new value.  The settings can be removed by calling the
+function with a t argument of -1 (except in the case of
+set_max_bus_tput(), which should be called with an r argument of 0).
+
+The fifth function above, omap_pm_get_dev_context_loss_count(),
+is intended as an optimization to allow drivers to determine whether the
+device has lost its internal context.  If context has been lost, the
+driver must restore its internal context before proceeding.
+
+
+Other specialized interface functions
+-------------------------------------
+
+The five functions listed above are intended to be usable by any
+device driver.  DSPBridge and CPUFreq have a few special requirements.
+DSPBridge expresses target DSP performance levels in terms of OPP IDs.
+CPUFreq expresses target MPU performance levels in terms of MPU
+frequency.  The OMAP PM interface contains functions for these
+specialized cases to convert that input information (OPPs/MPU
+frequency) into the form that the underlying power management
+implementation needs:
+
+6. (*pdata->dsp_get_opp_table)(void)
+
+7. (*pdata->dsp_set_min_opp)(u8 opp_id)
+
+8. (*pdata->dsp_get_opp)(void)
+
+9. (*pdata->cpu_get_freq_table)(void)
+
+10. (*pdata->cpu_set_freq)(unsigned long f)
+
+11. (*pdata->cpu_get_freq)(void)
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 5d5f5fadd1c2..2a5b850847c0 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -176,7 +176,9 @@ scaling_governor,		and by "echoing" the name of another
 				work on some specific architectures or
 				processors.
 
-cpuinfo_cur_freq :		Current speed of the CPU, in KHz.
+cpuinfo_cur_freq :		Current frequency of the CPU as obtained from
+				the hardware, in KHz. This is the frequency
+				the CPU actually runs at.
 
 scaling_available_frequencies : List of available frequencies, in KHz.
 
@@ -196,7 +198,10 @@ related_cpus :			List of CPUs that need some sort of frequency
 
 scaling_driver :		Hardware driver for cpufreq.
 
-scaling_cur_freq :		Current frequency of the CPU, in KHz.
+scaling_cur_freq :		Current frequency of the CPU as determined by
+				the governor and cpufreq core, in KHz. This is
+				the frequency the kernel thinks the CPU runs
+				at.
 
 If you have selected the "userspace" governor which allows you to
 set the CPU operating frequency to a specific value, you can read out
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 88519daab6e9..e1efc400bed6 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -152,7 +152,6 @@ piggy.gz
 piggyback
 pnmtologo
 ppc_defs.h*
-promcon_tbl.c
 pss_boot.h
 qconf
 raid6altivec*.c
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 503d21216d58..fa75220f8d34 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -428,16 +428,6 @@ Who:	Johannes Berg <johannes@sipsolutions.net>
 
 ----------------------------
 
-What:	CONFIG_X86_OLD_MCE
-When:	2.6.32
-Why:	Remove the old legacy 32bit machine check code. This has been
-	superseded by the newer machine check code from the 64bit port,
-	but the old version has been kept around for easier testing. Note this
-	doesn't impact the old P5 and WinChip machine check handlers.
-Who:	Andi Kleen <andi@firstfloor.org>
-
-----------------------------
-
 What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
 	exported interface anymore.
 When:	2.6.33
diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591
index 5628fcf4207f..e76a7892f68e 100644
--- a/Documentation/hwmon/pcf8591
+++ b/Documentation/hwmon/pcf8591
@@ -2,11 +2,11 @@ Kernel driver pcf8591
 =====================
 
 Supported chips:
-  * Philips PCF8591
+  * Philips/NXP PCF8591
     Prefix: 'pcf8591'
     Addresses scanned: I2C 0x48 - 0x4f
-    Datasheet: Publicly available at the Philips Semiconductor website
-               http://www.semiconductors.philips.com/pip/PCF8591P.html
+    Datasheet: Publicly available at the NXP website
+               http://www.nxp.com/pip/PCF8591_6.html
 
 Authors:
         Aurelien Jarno <aurelien@aurel32.net>
@@ -16,9 +16,10 @@ Authors:
 
 Description
 -----------
+
 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
-analog output) for the I2C bus produced by Philips Semiconductors. It
-is designed to provide a byte I2C interface to up to 4 separate devices.
+analog output) for the I2C bus produced by Philips Semiconductors (now NXP).
+It is designed to provide a byte I2C interface to up to 4 separate devices.
 
 The PCF8591 has 4 analog inputs programmable as single-ended or
 differential inputs :
@@ -58,8 +59,8 @@ Accessing PCF8591 via /sys interface
 -------------------------------------
 
 ! Be careful !
-The PCF8591 is plainly impossible to detect ! Stupid chip.
-So every chip with address in the interval [48..4f] is
+The PCF8591 is plainly impossible to detect! Stupid chip.
+So every chip with address in the interval [0x48..0x4f] is
 detected as PCF8591. If you have other chips in this address
 range, the workaround is to load this module after the one
 for your others chips.
@@ -67,19 +68,20 @@ for your others chips.
 On detection (i.e. insmod, modprobe et al.), directories are being
 created for each detected PCF8591:
 
-/sys/bus/devices/<0>-<1>/
+/sys/bus/i2c/devices/<0>-<1>/
 where <0> is the bus the chip was detected on (e. g. i2c-0)
 and <1> the chip address ([48..4f])
 
 Inside these directories, there are such files:
-in0, in1, in2, in3, out0_enable, out0_output, name
+in0_input, in1_input, in2_input, in3_input, out0_enable, out0_output, name
 
 Name contains chip name.
 
-The in0, in1, in2 and in3 files are RO. Reading gives the value of the
-corresponding channel. Depending on the current analog inputs configuration,
-files in2 and/or in3 do not exist. Values range are from 0 to 255 for single
-ended inputs and -128 to +127 for differential inputs (8-bit ADC).
+The in0_input, in1_input, in2_input and in3_input files are RO. Reading gives
+the value of the corresponding channel. Depending on the current analog inputs
+configuration, files in2_input and in3_input may not exist. Values range
+from 0 to 255 for single ended inputs and -128 to +127 for differential inputs
+(8-bit ADC).
 
 The out0_enable file is RW. Reading gives "1" for analog output enabled and
 "0" for analog output disabled. Writing accepts "0" and "1" accordingly.
diff --git a/Documentation/hwmon/tmp421 b/Documentation/hwmon/tmp421
new file mode 100644
index 000000000000..0cf07f824741
--- /dev/null
+++ b/Documentation/hwmon/tmp421
@@ -0,0 +1,36 @@
+Kernel driver tmp421
+====================
+
+Supported chips:
+  * Texas Instruments TMP421
+    Prefix: 'tmp421'
+    Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+  * Texas Instruments TMP422
+    Prefix: 'tmp422'
+    Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+  * Texas Instruments TMP423
+    Prefix: 'tmp423'
+    Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+
+Authors:
+	Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP421, TMP422
+and TMP423 temperature sensor chips. These chips implement one local
+and up to one (TMP421), up to two (TMP422) or up to three (TMP423)
+remote sensors. Temperature is measured in degrees Celsius. The chips
+are wired over I2C/SMBus and specified over a temperature range of -40
+to +125 degrees Celsius. Resolution for both the local and remote
+channels is 0.0625 degree C.
+
+The chips support only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+temp[1-4]_input
+temp[2-4]_fault
diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
new file mode 100644
index 000000000000..24f47d8f6a42
--- /dev/null
+++ b/Documentation/hwmon/wm831x
@@ -0,0 +1,37 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM831x PMICs
+    Prefix: 'wm831x'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8310
+	http://www.wolfsonmicro.com/products/WM8311
+	http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  Voltages in milivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC.  Chip and battery temperatures
+are available.  The chip temperature is calculated as:
+
+	Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.
diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350
new file mode 100644
index 000000000000..98f923bd2e92
--- /dev/null
+++ b/Documentation/hwmon/wm8350
@@ -0,0 +1,26 @@
+Kernel driver wm8350-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM835x PMICs
+    Prefix: 'wm8350'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8350
+	http://www.wolfsonmicro.com/products/WM8351
+	http://www.wolfsonmicro.com/products/WM8352
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM835x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+simple access to these major supplies.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  For the internal supplies the ADC
+is referenced to the system VRTC.
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 4d04572b6549..348b9e5e28fc 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -66,7 +66,9 @@ Example kernel-doc function comment:
  * The longer description can have multiple paragraphs.
  */
 
-The first line, with the short description, must be on a single line.
+The short description following the subject can span multiple lines
+and ends with an @argument description, an empty line or the end of
+the comment block.
 
 The @argument descriptions must begin on the very next line following
 this opening short function description line, with no intervening
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4c12a290bee5..0f17d16dc101 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1286,6 +1286,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1_swiotlb
 
+	machtype=	[Loongson] Share the same kernel image file between different
+			 yeeloong laptop.
+			Example: machtype=lemote-yeeloong-2f-7inch
+
 	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater
 			than or equal to this physical address is ignored.
 
@@ -1561,7 +1565,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			of returning the full 64-bit number.
 			The default is to return 64-bit inode numbers.
 
-	nmi_debug=	[KNL,AVR32] Specify one or more actions to take
+	nmi_debug=	[KNL,AVR32,SH] Specify one or more actions to take
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
diff --git a/Documentation/kref.txt b/Documentation/kref.txt
index 130b6e87aa7e..ae203f91ee9b 100644
--- a/Documentation/kref.txt
+++ b/Documentation/kref.txt
@@ -84,7 +84,6 @@ int my_data_handler(void)
 	task = kthread_run(more_data_handling, data, "more_data_handling");
 	if (task == ERR_PTR(-ENOMEM)) {
 		rv = -ENOMEM;
-	        kref_put(&data->refcount, data_release);
 		goto out;
 	}
 
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
index 90e8b3383ba2..78c45a87be57 100644
--- a/Documentation/trace/events.txt
+++ b/Documentation/trace/events.txt
@@ -1,7 +1,7 @@
 			     Event Tracing
 
 		Documentation written by Theodore Ts'o
-			Updated by Li Zefan
+		Updated by Li Zefan and Tom Zanussi
 
 1. Introduction
 ===============
@@ -97,3 +97,185 @@ The format of this boot option is the same as described in section 2.1.
 
 See The example provided in samples/trace_events
 
+4. Event formats
+================
+
+Each trace event has a 'format' file associated with it that contains
+a description of each field in a logged event.  This information can
+be used to parse the binary trace stream, and is also the place to
+find the field names that can be used in event filters (see section 5).
+
+It also displays the format string that will be used to print the
+event in text mode, along with the event name and ID used for
+profiling.
+
+Every event has a set of 'common' fields associated with it; these are
+the fields prefixed with 'common_'.  The other fields vary between
+events and correspond to the fields defined in the TRACE_EVENT
+definition for that event.
+
+Each field in the format has the form:
+
+     field:field-type field-name; offset:N; size:N;
+
+where offset is the offset of the field in the trace record and size
+is the size of the data item, in bytes.
+
+For example, here's the information displayed for the 'sched_wakeup'
+event:
+
+# cat /debug/tracing/events/sched/sched_wakeup/format
+
+name: sched_wakeup
+ID: 60
+format:
+	field:unsigned short common_type;	offset:0;	size:2;
+	field:unsigned char common_flags;	offset:2;	size:1;
+	field:unsigned char common_preempt_count;	offset:3;	size:1;
+	field:int common_pid;	offset:4;	size:4;
+	field:int common_tgid;	offset:8;	size:4;
+
+	field:char comm[TASK_COMM_LEN];	offset:12;	size:16;
+	field:pid_t pid;	offset:28;	size:4;
+	field:int prio;	offset:32;	size:4;
+	field:int success;	offset:36;	size:4;
+	field:int cpu;	offset:40;	size:4;
+
+print fmt: "task %s:%d [%d] success=%d [%03d]", REC->comm, REC->pid,
+	   REC->prio, REC->success, REC->cpu
+
+This event contains 10 fields, the first 5 common and the remaining 5
+event-specific.  All the fields for this event are numeric, except for
+'comm' which is a string, a distinction important for event filtering.
+
+5. Event filtering
+==================
+
+Trace events can be filtered in the kernel by associating boolean
+'filter expressions' with them.  As soon as an event is logged into
+the trace buffer, its fields are checked against the filter expression
+associated with that event type.  An event with field values that
+'match' the filter will appear in the trace output, and an event whose
+values don't match will be discarded.  An event with no filter
+associated with it matches everything, and is the default when no
+filter has been set for an event.
+
+5.1 Expression syntax
+---------------------
+
+A filter expression consists of one or more 'predicates' that can be
+combined using the logical operators '&&' and '||'.  A predicate is
+simply a clause that compares the value of a field contained within a
+logged event with a constant value and returns either 0 or 1 depending
+on whether the field value matched (1) or didn't match (0):
+
+	  field-name relational-operator value
+
+Parentheses can be used to provide arbitrary logical groupings and
+double-quotes can be used to prevent the shell from interpreting
+operators as shell metacharacters.
+
+The field-names available for use in filters can be found in the
+'format' files for trace events (see section 4).
+
+The relational-operators depend on the type of the field being tested:
+
+The operators available for numeric fields are:
+
+==, !=, <, <=, >, >=
+
+And for string fields they are:
+
+==, !=
+
+Currently, only exact string matches are supported.
+
+Currently, the maximum number of predicates in a filter is 16.
+
+5.2 Setting filters
+-------------------
+
+A filter for an individual event is set by writing a filter expression
+to the 'filter' file for the given event.
+
+For example:
+
+# cd /debug/tracing/events/sched/sched_wakeup
+# echo "common_preempt_count > 4" > filter
+
+A slightly more involved example:
+
+# cd /debug/tracing/events/sched/sched_signal_send
+# echo "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
+
+If there is an error in the expression, you'll get an 'Invalid
+argument' error when setting it, and the erroneous string along with
+an error message can be seen by looking at the filter e.g.:
+
+# cd /debug/tracing/events/sched/sched_signal_send
+# echo "((sig >= 10 && sig < 15) || dsig == 17) && comm != bash" > filter
+-bash: echo: write error: Invalid argument
+# cat filter
+((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
+^
+parse_error: Field not found
+
+Currently the caret ('^') for an error always appears at the beginning of
+the filter string; the error message should still be useful though
+even without more accurate position info.
+
+5.3 Clearing filters
+--------------------
+
+To clear the filter for an event, write a '0' to the event's filter
+file.
+
+To clear the filters for all events in a subsystem, write a '0' to the
+subsystem's filter file.
+
+5.3 Subsystem filters
+---------------------
+
+For convenience, filters for every event in a subsystem can be set or
+cleared as a group by writing a filter expression into the filter file
+at the root of the subsytem.  Note however, that if a filter for any
+event within the subsystem lacks a field specified in the subsystem
+filter, or if the filter can't be applied for any other reason, the
+filter for that event will retain its previous setting.  This can
+result in an unintended mixture of filters which could lead to
+confusing (to the user who might think different filters are in
+effect) trace output.  Only filters that reference just the common
+fields can be guaranteed to propagate successfully to all events.
+
+Here are a few subsystem filter examples that also illustrate the
+above points:
+
+Clear the filters on all events in the sched subsytem:
+
+# cd /sys/kernel/debug/tracing/events/sched
+# echo 0 > filter
+# cat sched_switch/filter
+none
+# cat sched_wakeup/filter
+none
+
+Set a filter using only common fields for all events in the sched
+subsytem (all events end up with the same filter):
+
+# cd /sys/kernel/debug/tracing/events/sched
+# echo common_pid == 0 > filter
+# cat sched_switch/filter
+common_pid == 0
+# cat sched_wakeup/filter
+common_pid == 0
+
+Attempt to set a filter using a non-common field for all events in the
+sched subsytem (all events but those that have a prev_pid field retain
+their old filters):
+
+# cd /sys/kernel/debug/tracing/events/sched
+# echo prev_pid == 0 > filter
+# cat sched_switch/filter
+prev_pid == 0
+# cat sched_wakeup/filter
+common_pid == 0
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
new file mode 100644
index 000000000000..7003e10f10f5
--- /dev/null
+++ b/Documentation/trace/ftrace-design.txt
@@ -0,0 +1,233 @@
+		function tracer guts
+		====================
+
+Introduction
+------------
+
+Here we will cover the architecture pieces that the common function tracing
+code relies on for proper functioning.  Things are broken down into increasing
+complexity so that you can start simple and at least get basic functionality.
+
+Note that this focuses on architecture implementation details only.  If you
+want more explanation of a feature in terms of common code, review the common
+ftrace.txt file.
+
+
+Prerequisites
+-------------
+
+Ftrace relies on these features being implemented:
+ STACKTRACE_SUPPORT - implement save_stack_trace()
+ TRACE_IRQFLAGS_SUPPORT - implement include/asm/irqflags.h
+
+
+HAVE_FUNCTION_TRACER
+--------------------
+
+You will need to implement the mcount and the ftrace_stub functions.
+
+The exact mcount symbol name will depend on your toolchain.  Some call it
+"mcount", "_mcount", or even "__mcount".  You can probably figure it out by
+running something like:
+	$ echo 'main(){}' | gcc -x c -S -o - - -pg | grep mcount
+	        call    mcount
+We'll make the assumption below that the symbol is "mcount" just to keep things
+nice and simple in the examples.
+
+Keep in mind that the ABI that is in effect inside of the mcount function is
+*highly* architecture/toolchain specific.  We cannot help you in this regard,
+sorry.  Dig up some old documentation and/or find someone more familiar than
+you to bang ideas off of.  Typically, register usage (argument/scratch/etc...)
+is a major issue at this point, especially in relation to the location of the
+mcount call (before/after function prologue).  You might also want to look at
+how glibc has implemented the mcount function for your architecture.  It might
+be (semi-)relevant.
+
+The mcount function should check the function pointer ftrace_trace_function
+to see if it is set to ftrace_stub.  If it is, there is nothing for you to do,
+so return immediately.  If it isn't, then call that function in the same way
+the mcount function normally calls __mcount_internal -- the first argument is
+the "frompc" while the second argument is the "selfpc" (adjusted to remove the
+size of the mcount call that is embedded in the function).
+
+For example, if the function foo() calls bar(), when the bar() function calls
+mcount(), the arguments mcount() will pass to the tracer are:
+	"frompc" - the address bar() will use to return to foo()
+	"selfpc" - the address bar() (with _mcount() size adjustment)
+
+Also keep in mind that this mcount function will be called *a lot*, so
+optimizing for the default case of no tracer will help the smooth running of
+your system when tracing is disabled.  So the start of the mcount function is
+typically the bare min with checking things before returning.  That also means
+the code flow should usually kept linear (i.e. no branching in the nop case).
+This is of course an optimization and not a hard requirement.
+
+Here is some pseudo code that should help (these functions should actually be
+implemented in assembly):
+
+void ftrace_stub(void)
+{
+	return;
+}
+
+void mcount(void)
+{
+	/* save any bare state needed in order to do initial checking */
+
+	extern void (*ftrace_trace_function)(unsigned long, unsigned long);
+	if (ftrace_trace_function != ftrace_stub)
+		goto do_trace;
+
+	/* restore any bare state */
+
+	return;
+
+do_trace:
+
+	/* save all state needed by the ABI (see paragraph above) */
+
+	unsigned long frompc = ...;
+	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+	ftrace_trace_function(frompc, selfpc);
+
+	/* restore all state needed by the ABI */
+}
+
+Don't forget to export mcount for modules !
+extern void mcount(void);
+EXPORT_SYMBOL(mcount);
+
+
+HAVE_FUNCTION_TRACE_MCOUNT_TEST
+-------------------------------
+
+This is an optional optimization for the normal case when tracing is turned off
+in the system.  If you do not enable this Kconfig option, the common ftrace
+code will take care of doing the checking for you.
+
+To support this feature, you only need to check the function_trace_stop
+variable in the mcount function.  If it is non-zero, there is no tracing to be
+done at all, so you can return.
+
+This additional pseudo code would simply be:
+void mcount(void)
+{
+	/* save any bare state needed in order to do initial checking */
+
++	if (function_trace_stop)
++		return;
+
+	extern void (*ftrace_trace_function)(unsigned long, unsigned long);
+	if (ftrace_trace_function != ftrace_stub)
+...
+
+
+HAVE_FUNCTION_GRAPH_TRACER
+--------------------------
+
+Deep breath ... time to do some real work.  Here you will need to update the
+mcount function to check ftrace graph function pointers, as well as implement
+some functions to save (hijack) and restore the return address.
+
+The mcount function should check the function pointers ftrace_graph_return
+(compare to ftrace_stub) and ftrace_graph_entry (compare to
+ftrace_graph_entry_stub).  If either of those are not set to the relevant stub
+function, call the arch-specific function ftrace_graph_caller which in turn
+calls the arch-specific function prepare_ftrace_return.  Neither of these
+function names are strictly required, but you should use them anyways to stay
+consistent across the architecture ports -- easier to compare & contrast
+things.
+
+The arguments to prepare_ftrace_return are slightly different than what are
+passed to ftrace_trace_function.  The second argument "selfpc" is the same,
+but the first argument should be a pointer to the "frompc".  Typically this is
+located on the stack.  This allows the function to hijack the return address
+temporarily to have it point to the arch-specific function return_to_handler.
+That function will simply call the common ftrace_return_to_handler function and
+that will return the original return address with which, you can return to the
+original call site.
+
+Here is the updated mcount pseudo code:
+void mcount(void)
+{
+...
+	if (ftrace_trace_function != ftrace_stub)
+		goto do_trace;
+
++#ifdef CONFIG_FUNCTION_GRAPH_TRACER
++	extern void (*ftrace_graph_return)(...);
++	extern void (*ftrace_graph_entry)(...);
++	if (ftrace_graph_return != ftrace_stub ||
++	    ftrace_graph_entry != ftrace_graph_entry_stub)
++		ftrace_graph_caller();
++#endif
+
+	/* restore any bare state */
+...
+
+Here is the pseudo code for the new ftrace_graph_caller assembly function:
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void ftrace_graph_caller(void)
+{
+	/* save all state needed by the ABI */
+
+	unsigned long *frompc = &...;
+	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+	prepare_ftrace_return(frompc, selfpc);
+
+	/* restore all state needed by the ABI */
+}
+#endif
+
+For information on how to implement prepare_ftrace_return(), simply look at
+the x86 version.  The only architecture-specific piece in it is the setup of
+the fault recovery table (the asm(...) code).  The rest should be the same
+across architectures.
+
+Here is the pseudo code for the new return_to_handler assembly function.  Note
+that the ABI that applies here is different from what applies to the mcount
+code.  Since you are returning from a function (after the epilogue), you might
+be able to skimp on things saved/restored (usually just registers used to pass
+return values).
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void return_to_handler(void)
+{
+	/* save all state needed by the ABI (see paragraph above) */
+
+	void (*original_return_point)(void) = ftrace_return_to_handler();
+
+	/* restore all state needed by the ABI */
+
+	/* this is usually either a return or a jump */
+	original_return_point();
+}
+#endif
+
+
+HAVE_FTRACE_NMI_ENTER
+---------------------
+
+If you can't trace NMI functions, then skip this option.
+
+<details to be filled>
+
+
+HAVE_FTRACE_SYSCALLS
+---------------------
+
+<details to be filled>
+
+
+HAVE_FTRACE_MCOUNT_RECORD
+-------------------------
+
+See scripts/recordmcount.pl for more info.
+
+<details to be filled>
+
+
+HAVE_DYNAMIC_FTRACE
+---------------------
+
+<details to be filled>
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 355d0f1f8c50..1b6292bbdd6d 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -26,6 +26,12 @@ disabled, and more (ftrace allows for tracer plugins, which
 means that the list of tracers can always grow).
 
 
+Implementation Details
+----------------------
+
+See ftrace-design.txt for details for arch porters and such.
+
+
 The File System
 ---------------
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 9117b65f4ae3..43761a00e3f1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -931,6 +931,12 @@ W:	http://wireless.kernel.org/en/users/Drivers/ar9170
 S:	Maintained
 F:	drivers/net/wireless/ath/ar9170/
 
+ATK0110 HWMON DRIVER
+M:	Luca Tettamanti <kronos.it@gmail.com>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	drivers/hwmon/asus_atk0110.c
+
 ATI_REMOTE2 DRIVER
 M:	Ville Syrjala <syrjala@sci.fi>
 S:	Maintained
@@ -1967,7 +1973,6 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-M:	Stephen Tweedie <sct@redhat.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
@@ -2152,13 +2157,16 @@ F:	Documentation/filesystems/caching/
 F:	fs/fscache/
 F:	include/linux/fscache*.h
 
-FTRACE
+TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
+M:	Frederic Weisbecker <fweisbec@gmail.com>
+M:	Ingo Molnar <mingo@redhat.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
 F:	arch/*/kernel/ftrace.c
-F:	include/*/ftrace.h
+F:	include/*/ftrace.h include/trace/ include/linux/trace*.h
 F:	kernel/trace/
 
 FUJITSU FR-V (FRV) PORT
@@ -2892,8 +2900,8 @@ F:	fs/jffs2/
 F:	include/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-M:	Stephen Tweedie <sct@redhat.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
+M:	Jan Kara <jack@suse.cz>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd*/
@@ -4446,6 +4454,14 @@ S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
 
+SCORE ARCHITECTURE
+P:	Chen Liqin
+M:	liqin.chen@sunplusct.com
+P:	Lennox Wu
+M:	lennox.wu@sunplusct.com
+W:	http://www.sunplusct.com
+S:	Supported
+
 SCSI CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-scsi@vger.kernel.org
@@ -4645,6 +4661,12 @@ F:	arch/arm/mach-s3c2410/
 F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
+TI DAVINCI MACHINE SUPPORT
+P:	Kevin Hilman
+M:	davinci-linux-open-source@linux.davincidsp.com
+S:	Supported
+F:	arch/arm/mach-davinci
+
 SIS 190 ETHERNET DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -5669,6 +5691,26 @@ S:	Supported
 F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
+WOLFSON MICROELECTRONICS PMIC DRIVERS
+P:	Mark Brown
+M:	broonie@opensource.wolfsonmicro.com
+L:	linux-kernel@vger.kernel.org
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
+W:	http://opensource.wolfsonmicro.com/node/8
+S:	Supported
+F:	drivers/leds/leds-wm83*.c
+F:	drivers/mfd/wm8*.c
+F:	drivers/power/wm83*.c
+F:	drivers/rtc/rtc-wm83*.c
+F:	drivers/regulator/wm8*.c
+F:	drivers/video/backlight/wm83*_bl.c
+F:	drivers/watchdog/wm83*_wdt.c
+F:	include/linux/mfd/wm831x/
+F:	include/linux/mfd/wm8350/
+F:	include/linux/mfd/wm8400/
+F:	sound/soc/codecs/wm8350.c
+F:	sound/soc/codecs/wm8400.c
+
 X.25 NETWORK LAYER
 M:	Henner Eisen <eis@baty.hanse.de>
 L:	linux-x25@vger.kernel.org
@@ -5701,7 +5743,7 @@ F:	include/xen/
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Felix Blyakher <felixb@sgi.com>
+M:	Alex Elder <aelder@sgi.com>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
diff --git a/arch/Kconfig b/arch/Kconfig
index beea3ccebb5e..7f418bbc261a 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -9,6 +9,7 @@ config OPROFILE
 	depends on TRACING_SUPPORT
 	select TRACING
 	select RING_BUFFER
+	select RING_BUFFER_ALLOW_SWAP
 	help
 	  OProfile is a profiling system capable of profiling the
 	  whole system, include the kernel, kernel modules, libraries,
diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig
new file mode 100644
index 000000000000..7c8e38f5c5ab
--- /dev/null
+++ b/arch/arm/configs/da830_omapl137_defconfig
@@ -0,0 +1,1254 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2-davinci1
+# Wed May 13 15:33:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da850_omapl138_defconfig
new file mode 100644
index 000000000000..842a70b079bf
--- /dev/null
+++ b/arch/arm/configs/da850_omapl138_defconfig
@@ -0,0 +1,1229 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-davinci1
+# Mon Jun 29 07:54:15 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_ARCH_DAVINCI_DA8XX=y
+# CONFIG_ARCH_DAVINCI_DM365 is not set
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ac18662f38cc..ddffe39d9f87 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Tue May 26 07:24:28 2009
+# Linux kernel version: 2.6.31-rc3-davinci1
+# Fri Jul 17 08:26:52 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -62,8 +60,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,8 +89,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -106,6 +107,11 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +124,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,13 +151,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,26 +167,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_AINTC=y
+CONFIG_ARCH_DAVINCI_DMx=y
 
 #
 # TI DaVinci Implementations
@@ -191,6 +199,9 @@ CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
+# CONFIG_ARCH_DAVINCI_DA830 is not set
+# CONFIG_ARCH_DAVINCI_DA850 is not set
+CONFIG_ARCH_DAVINCI_DM365=y
 
 #
 # DaVinci Board Type
@@ -200,6 +211,7 @@ CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
+CONFIG_MACH_DAVINCI_DM365_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -227,7 +239,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -252,7 +263,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -268,12 +278,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -415,6 +426,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -553,6 +565,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -564,6 +577,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
@@ -609,10 +623,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -637,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -684,6 +693,7 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -748,18 +758,21 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -773,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -832,6 +846,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -854,7 +869,6 @@ CONFIG_I2C_DAVINCI=y
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -935,6 +949,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -986,52 +1001,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1102,6 +1073,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1112,9 +1088,16 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_I2S=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_EVM=m
+CONFIG_SND_DM6467_SOC_EVM=m
+# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -1143,7 +1126,7 @@ CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
@@ -1160,10 +1143,11 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1266,6 +1250,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
@@ -1285,17 +1270,20 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
@@ -1311,7 +1299,7 @@ CONFIG_USB_CDC_COMPOSITE=m
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1328,7 +1316,6 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1340,7 +1327,7 @@ CONFIG_LEDS_CLASS=m
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1386,6 +1373,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1433,14 +1421,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1623,6 +1613,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1654,18 +1645,16 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
new file mode 100644
index 000000000000..8da75dede52e
--- /dev/null
+++ b/arch/arm/configs/n8x0_defconfig
@@ -0,0 +1,1104 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc5
+# Thu Aug  6 22:17:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP2_TUSB6010=y
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_NOKIA_N8X0=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_HAVE_MTD_OTP=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_ONENAND_OTP=y
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_TUSB6010=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_TUSB_OMAP_DMA=y
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 4c6fb7e959df..51c0fa8897cd 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -128,6 +128,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -236,6 +237,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -317,7 +319,12 @@ CONFIG_BINFMT_MISC=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -713,6 +720,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -741,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
@@ -787,7 +796,7 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -798,7 +807,8 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
@@ -806,6 +816,8 @@ CONFIG_USB_MON=y
 #
 # USB Host Controller Drivers
 #
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
@@ -818,10 +830,10 @@ CONFIG_USB_MUSB_SOC=y
 #
 # OMAP 343x high speed USB support
 #
-CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_HOST is not set
 # CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 CONFIG_USB_INVENTRA_DMA=y
@@ -887,8 +899,8 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
@@ -906,6 +918,15 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -923,6 +944,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
@@ -981,10 +1003,11 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Voltage and Current regulators
 #
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 
 #
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 8fb918d9ba65..9a510eab75a6 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 14:17:01 2009
+# Linux kernel version: 2.6.30-omap1
+# Tue Jun 23 10:36:45 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -197,9 +197,9 @@ CONFIG_OMAP_MCBSP=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
@@ -207,10 +207,10 @@ CONFIG_ARCH_OMAP3430=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_MACH_OVERO=y
-CONFIG_MACH_OMAP3_PANDORA=y
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
 
 #
@@ -950,7 +950,7 @@ CONFIG_SPI_OMAP24XX=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
+# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
 #
@@ -1370,7 +1370,7 @@ CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_MCBSP=y
 # CONFIG_SND_OMAP_SOC_OVERO is not set
 CONFIG_SND_OMAP_SOC_SDP3430=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
 CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_TWL4030=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index 213fe9c5eaae..f1739fae7ed4 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
+# Linux kernel version: 2.6.30-omap1
+# Fri Jun 12 17:25:46 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -39,44 +37,61 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -84,19 +99,13 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,7 +130,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -134,10 +140,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -158,14 +164,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # TI OMAP Implementations
@@ -174,6 +183,7 @@ CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
 # CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
 
 #
 # OMAP Feature Selections
@@ -185,6 +195,7 @@ CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -192,25 +203,20 @@ CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
 #
 # OMAP Board Type
 #
-# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
 # CONFIG_MACH_OMAP_LDP is not set
-CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
 # CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP_ZOOM2=y
 
 #
 # Processor Type
@@ -239,6 +245,10 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 # CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -254,26 +264,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -287,9 +303,10 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -309,13 +326,23 @@ CONFIG_VFPv3=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -378,7 +405,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -389,8 +418,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -416,14 +445,28 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_OMAP_STI is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -461,14 +504,20 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -501,8 +550,10 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -519,7 +570,10 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -561,17 +615,25 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -607,13 +669,15 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -639,6 +703,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Other I2C/SMBus bus drivers
@@ -650,14 +715,11 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_TWL4030_POWEROFF is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -672,12 +734,12 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -686,11 +748,16 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -702,26 +769,34 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
+CONFIG_W1_CON=y
 
 #
 # 1-wire Bus Masters
 #
+# CONFIG_W1_MASTER_DS2490 is not set
 # CONFIG_W1_MASTER_DS2482 is not set
 # CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
 
 #
 # 1-wire Slaves
 #
 # CONFIG_W1_SLAVE_THERM is not set
 # CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
 # CONFIG_W1_SLAVE_DS2433 is not set
 # CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 
@@ -729,11 +804,17 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
 
 #
-# Sonics Silicon Backplane
+# USB-based Watchdog Cards
 #
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
 # CONFIG_SSB is not set
 
 #
@@ -741,12 +822,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -756,12 +844,14 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
 # CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -782,10 +872,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -798,19 +890,197 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
-# CONFIG_USB_SUPPORT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -818,11 +1088,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -852,43 +1124,55 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
 
 #
 # File systems
@@ -897,18 +1181,24 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -917,6 +1207,11 @@ CONFIG_QUOTACTL=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -937,15 +1232,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -954,6 +1247,7 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -962,6 +1256,7 @@ CONFIG_TMPFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -975,7 +1270,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1045,6 +1339,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
@@ -1062,6 +1357,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1084,21 +1382,36 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1110,17 +1423,28 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1152,7 +1476,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1189,15 +1513,21 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1205,7 +1535,9 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index f238df66efd4..e7e31332c62a 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1006,6 +1006,7 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_WATCHDOG=m
 
 #
 # USB-based Watchdog Cards
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index be747f5c6cd8..40866c643f13 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -6,6 +6,9 @@ config AINTC
 config CP_INTC
 	bool
 
+config ARCH_DAVINCI_DMx
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
@@ -13,20 +16,41 @@ comment "DaVinci Core Type"
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM355
         bool "DaVinci 355 based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM646x
         bool "DaVinci 646x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+        bool "DA830/OMAP-L137 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA850
+	bool "DA850/OMAP-L138 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA8XX
+	bool
+
+config ARCH_DAVINCI_DM365
+	bool "DaVinci 365 based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
-	default y
+	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
@@ -41,6 +65,7 @@ config MACH_SFFSDR
 
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
+	default ARCH_DAVINCI_DM355
 	depends on ARCH_DAVINCI_DM355
 	help
 	  Configure this option to specify the whether the board used
@@ -55,11 +80,33 @@ config MACH_DM355_LEOPARD
 
 config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
+	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
 
+config MACH_DAVINCI_DM365_EVM
+	bool "TI DM365 EVM"
+	default ARCH_DAVINCI_DM365
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Configure this option to specify whether the board used
+	  for development is a DM365 EVM
+
+config MACH_DAVINCI_DA830_EVM
+	bool "TI DA830/OMAP-L137 Reference Platform"
+	default ARCH_DAVINCI_DA830
+	depends on ARCH_DAVINCI_DA830
+	help
+	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+
+config MACH_DAVINCI_DA850_EVM
+	bool "TI DA850/OMAP-L138 Reference Platform"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 059ab78084ba..2e11e847313b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,14 +5,17 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o devices.o dma.o usb.o common.o sram.o
+			   gpio.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -23,3 +26,6 @@ obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index e1dd366f836b..db97ef2c6477 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -1,3 +1,13 @@
+ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
+ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
+$(error Cannot enable DaVinci and DA8XX platforms concurrently)
+else
+   zreladdr-y	:= 0xc0008000
+params_phys-y	:= 0xc0000100
+initrd_phys-y	:= 0xc0800000
+endif
+else
    zreladdr-y	:= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x80800000
+endif
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
new file mode 100644
index 000000000000..bfbb63936f33
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -0,0 +1,157 @@
+/*
+ * TI DA830/OMAP L137 EVM board
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/asp.h>
+
+#define DA830_EVM_PHY_MASK		0x0
+#define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da830_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static u8 da830_iis_serializer_direction[] = {
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da830_evm_snd_data = {
+	.tx_dma_offset  = 0x2000,
+	.rx_dma_offset  = 0x2000,
+	.op_mode        = DAVINCI_MCASP_IIS_MODE,
+	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
+	.tdm_slots      = 2,
+	.serial_dir     = da830_iis_serializer_direction,
+	.eventq_no      = EVENTQ_0,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+static __init void da830_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da830_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da830_i2c0_pins);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 1;
+
+	ret = da8xx_pinmux_setup(da830_cpgmac_pins);
+	if (ret)
+		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da830_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	davinci_serial_init(&da830_evm_uart_config);
+	i2c_register_board_info(1, da830_evm_i2c_devices,
+			ARRAY_SIZE(da830_evm_i2c_devices));
+
+	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	if (ret)
+		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(1, &da830_evm_snd_data);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da830_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da830_evm_console_init);
+#endif
+
+static __init void da830_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da830_evm_map_io(void)
+{
+	da830_init();
+}
+
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da830_evm_map_io,
+	.init_irq	= da830_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da830_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
new file mode 100644
index 000000000000..c759d72494e0
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -0,0 +1,415 @@
+/*
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da830-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/nand.h>
+
+#define DA850_EVM_PHY_MASK		0x1
+#define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
+#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
+
+#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
+
+static struct mtd_partition da850_evm_norflash_partition[] = {
+	{
+		.name           = "NOR filesystem",
+		.offset         = 0,
+		.size           = MTDPART_SIZ_FULL,
+		.mask_flags     = 0,
+	},
+};
+
+static struct physmap_flash_data da850_evm_norflash_data = {
+	.width		= 2,
+	.parts		= da850_evm_norflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
+};
+
+static struct resource da850_evm_norflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS2_BASE,
+		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_norflash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data  = &da850_evm_norflash_data,
+	},
+	.num_resources	= 1,
+	.resource	= da850_evm_norflash_resource,
+};
+
+/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
+ * (128K blocks). It may be used instead of the (default) SPI flash
+ * to boot, using TI's tools to install the secondary boot loader
+ * (UBL) and U-Boot.
+ */
+struct mtd_partition da850_evm_nandflash_partition[] = {
+	{
+		.name		= "u-boot env",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	 },
+	{
+		.name		= "UBL",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= 0x200000,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_nand_pdata da850_evm_nandflash_data = {
+	.parts		= da850_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource da850_evm_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da850_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
+	.resource	= da850_evm_nandflash_resource,
+};
+
+static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
+static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da850_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
+};
+
+/* davinci da850 evm audio machine driver */
+static u8 da850_iis_serializer_direction[] = {
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da850_evm_snd_data = {
+	.tx_dma_offset	= 0x2000,
+	.rx_dma_offset	= 0x2000,
+	.op_mode	= DAVINCI_MCASP_IIS_MODE,
+	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
+	.tdm_slots	= 2,
+	.serial_dir	= da850_iis_serializer_direction,
+	.eventq_no	= EVENTQ_1,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+static int da850_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA850_MMCSD_WP_PIN);
+}
+
+static int da850_evm_mmc_get_cd(int index)
+{
+	return !gpio_get_value(DA850_MMCSD_CD_PIN);
+}
+
+static struct davinci_mmc_config da850_mmc_config = {
+	.get_ro		= da850_evm_mmc_get_ro,
+	.get_cd		= da850_evm_mmc_get_cd,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static int da850_lcd_hw_init(void)
+{
+	int status;
+
+	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
+	if (status < 0)
+		return status;
+
+	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
+	if (status < 0) {
+		gpio_free(DA850_LCD_BL_PIN);
+		return status;
+	}
+
+	gpio_direction_output(DA850_LCD_BL_PIN, 0);
+	gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+
+	/* disable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 0);
+
+	/* disable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 0);
+
+	/* enable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 1);
+
+	/* enable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 1);
+
+	return 0;
+}
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_pinmux_setup(da850_nand_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_nor_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+	da850_evm_init_nor();
+
+	platform_add_devices(da850_evm_devices,
+				ARRAY_SIZE(da850_evm_devices));
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da850_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_i2c0_pins);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 0;
+
+	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+	if (ret)
+		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	if (HAS_MMC) {
+		if (HAS_NOR)
+			pr_warning("WARNING: both NOR Flash and MMC/SD are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable one of them.\n");
+
+		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
+					" %d\n", ret);
+
+		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_CD_PIN);
+		gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_WP_PIN);
+		gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+		ret = da8xx_register_mmcsd0(&da850_mmc_config);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 registration failed:"
+					" %d\n", ret);
+	}
+
+	davinci_serial_init(&da850_evm_uart_config);
+
+	i2c_register_board_info(1, da850_evm_i2c_devices,
+			ARRAY_SIZE(da850_evm_i2c_devices));
+
+	/*
+	 * shut down uart 0 and 1; they are not used on the board and
+	 * accessing them causes endless "too much work in irq53" messages
+	 * with arago fs
+	 */
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+	ret = da8xx_pinmux_setup(da850_mcasp_pins);
+	if (ret)
+		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(0, &da850_evm_snd_data);
+
+	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+	if (ret)
+		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da850_lcd_hw_init();
+	if (ret)
+		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc();
+	if (ret)
+		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
+				ret);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da850_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da850_evm_console_init);
+#endif
+
+static __init void da850_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da850_evm_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da850_evm_map_io,
+	.init_irq	= da850_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d6ab64ccd496..77e806798822 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
@@ -117,6 +119,8 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static struct snd_platform_data dm355_evm_snd_data;
+
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -134,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
 }
 
 static struct i2c_board_info dm355evm_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
 		.platform_data = dm355evm_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+	},
+	/* { plus irq  }, */
+	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
 };
 
 static void __init evm_init_i2c(void)
@@ -177,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = {
 	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	}
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM355 EVM",
+	.ccdc = "DM355 CCDC",
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&dm355evm_dm9000,
 	&davinci_nand_device,
@@ -188,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
@@ -279,6 +351,9 @@ static __init void dm355_evm_init(void)
 
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
+
+	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
 static __init void dm355_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
new file mode 100644
index 000000000000..a1d5e7dac741
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -0,0 +1,492 @@
+/*
+ * TI DaVinci DM365 EVM board support
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/i2c/at24.h>
+#include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/mux.h>
+#include <mach/hardware.h>
+#include <mach/dm365.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/nand.h>
+
+
+static inline int have_imager(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+static inline int have_tvp7002(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+
+#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
+#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
+
+#define DM365_EVM_PHY_MASK		(0x2)
+#define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+/*
+ * A MAX-II CPLD is used for various board control functions.
+ */
+#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
+
+#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
+#define CPLD_TEST	CPLD_OFFSET(0,1)
+#define CPLD_LEDS	CPLD_OFFSET(0,2)
+#define CPLD_MUX	CPLD_OFFSET(0,3)
+#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
+#define CPLD_POWER	CPLD_OFFSET(1,1)
+#define CPLD_VIDEO	CPLD_OFFSET(1,2)
+#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
+
+#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
+#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
+
+#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
+#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
+#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
+#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
+#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
+#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
+#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
+#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
+#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
+
+#define CPLD_RESETS	CPLD_OFFSET(4,3)
+
+#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
+#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
+#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
+#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
+#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
+#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
+
+static void __iomem *cpld;
+
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips with a different block size, partitioning will
+ * need to be changed. This NAND chip MT29F16G08FAA is the default
+ * NAND shipped with the Spectrum Digital DM365 EVM
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 28 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int cpld_mmc_get_cd(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* low == card present */
+	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
+}
+
+static int cpld_mmc_get_ro(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* high == card's write protect switch active */
+	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
+}
+
+static struct davinci_mmc_config dm365evm_mmc_config = {
+	.get_cd		= cpld_mmc_get_cd,
+	.get_ro		= cpld_mmc_get_ro,
+	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static void dm365evm_emac_configure(void)
+{
+	/*
+	 * EMAC pins are multiplexed with GPIO and UART
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
+	 */
+	davinci_cfg_reg(DM365_EMAC_TX_EN);
+	davinci_cfg_reg(DM365_EMAC_TX_CLK);
+	davinci_cfg_reg(DM365_EMAC_COL);
+	davinci_cfg_reg(DM365_EMAC_TXD3);
+	davinci_cfg_reg(DM365_EMAC_TXD2);
+	davinci_cfg_reg(DM365_EMAC_TXD1);
+	davinci_cfg_reg(DM365_EMAC_TXD0);
+	davinci_cfg_reg(DM365_EMAC_RXD3);
+	davinci_cfg_reg(DM365_EMAC_RXD2);
+	davinci_cfg_reg(DM365_EMAC_RXD1);
+	davinci_cfg_reg(DM365_EMAC_RXD0);
+	davinci_cfg_reg(DM365_EMAC_RX_CLK);
+	davinci_cfg_reg(DM365_EMAC_RX_DV);
+	davinci_cfg_reg(DM365_EMAC_RX_ER);
+	davinci_cfg_reg(DM365_EMAC_CRS);
+	davinci_cfg_reg(DM365_EMAC_MDIO);
+	davinci_cfg_reg(DM365_EMAC_MDCLK);
+
+	/*
+	 * EMAC interrupts are multiplexed with GPIO interrupts
+	 * Details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
+	 */
+	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
+	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
+}
+
+static void dm365evm_mmc_configure(void)
+{
+	/*
+	 * MMC/SD pins are multiplexed with GPIO and EMIF
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
+	 */
+	davinci_cfg_reg(DM365_SD1_CLK);
+	davinci_cfg_reg(DM365_SD1_CMD);
+	davinci_cfg_reg(DM365_SD1_DATA3);
+	davinci_cfg_reg(DM365_SD1_DATA2);
+	davinci_cfg_reg(DM365_SD1_DATA1);
+	davinci_cfg_reg(DM365_SD1_DATA0);
+}
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *dm365_evm_nand_devices[] __initdata = {
+	&davinci_nand_device,
+};
+
+static inline int have_leds(void)
+{
+#ifdef CONFIG_LEDS_CLASS
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+struct cpld_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+static const struct {
+	const char *name;
+	const char *trigger;
+} cpld_leds[] = {
+	{ "dm365evm::ds2", },
+	{ "dm365evm::ds3", },
+	{ "dm365evm::ds4", },
+	{ "dm365evm::ds5", },
+	{ "dm365evm::ds6", "nand-disk", },
+	{ "dm365evm::ds7", "mmc1", },
+	{ "dm365evm::ds8", "mmc0", },
+	{ "dm365evm::ds9", "heartbeat", },
+};
+
+static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+	__raw_writeb(reg, cpld + CPLD_LEDS);
+}
+
+static enum led_brightness cpld_led_get(struct led_classdev *cdev)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init cpld_leds_init(void)
+{
+	int	i;
+
+	if (!have_leds() ||  !cpld)
+		return 0;
+
+	/* setup LEDs */
+	__raw_writeb(0xff, cpld + CPLD_LEDS);
+	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
+		struct cpld_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = cpld_leds[i].name;
+		led->cdev.brightness_set = cpld_led_set;
+		led->cdev.brightness_get = cpld_led_get;
+		led->cdev.default_trigger = cpld_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+/* run after subsys_initcall() for LEDs */
+fs_initcall(cpld_leds_init);
+
+
+static void __init evm_init_cpld(void)
+{
+	u8 mux, resets;
+	const char *label;
+	struct clk *aemif_clk;
+
+	/* Make sure we can configure the CPLD through CS1.  Then
+	 * leave it on for later access to MMC and LED registers.
+	 */
+	aemif_clk = clk_get(NULL, "aemif");
+	if (IS_ERR(aemif_clk))
+		return;
+	clk_enable(aemif_clk);
+
+	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
+			"cpld") == NULL)
+		goto fail;
+	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
+	if (!cpld) {
+		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
+				SECTION_SIZE);
+fail:
+		pr_err("ERROR: can't map CPLD\n");
+		clk_disable(aemif_clk);
+		return;
+	}
+
+	/* External muxing for some signals */
+	mux = 0;
+
+	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
+	 * NOTE:  SW4 bus width setting must match!
+	 */
+	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
+		/* external keypad mux */
+		mux |= BIT(7);
+
+		platform_add_devices(dm365_evm_nand_devices,
+				ARRAY_SIZE(dm365_evm_nand_devices));
+	} else {
+		/* no OneNAND support yet */
+	}
+
+	/* Leave external chips in reset when unused. */
+	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
+
+	/* Static video input config with SN74CBT16214 1-of-3 mux:
+	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
+	 *  - port b2 == imager (mux lowbits == 2 or 7)
+	 *  - port b3 == tvp5146 (mux lowbits == 5)
+	 *
+	 * Runtime switching could work too, with limitations.
+	 */
+	if (have_imager()) {
+		label = "HD imager";
+		mux |= 1;
+
+		/* externally mux MMC1/ENET/AIC33 to imager */
+		mux |= BIT(6) | BIT(5) | BIT(3);
+	} else {
+		struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+		/* we can use MMC1 ... */
+		dm365evm_mmc_configure();
+		davinci_setup_mmc(1, &dm365evm_mmc_config);
+
+		/* ... and ENET ... */
+		dm365evm_emac_configure();
+		soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
+		soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+		resets &= ~BIT(3);
+
+		/* ... and AIC33 */
+		resets &= ~BIT(1);
+
+		if (have_tvp7002()) {
+			mux |= 2;
+			resets &= ~BIT(2);
+			label = "tvp7002 HD";
+		} else {
+			/* default to tvp5146 */
+			mux |= 5;
+			resets &= ~BIT(0);
+			label = "tvp5146 SD";
+		}
+	}
+	__raw_writeb(mux, cpld + CPLD_MUX);
+	__raw_writeb(resets, cpld + CPLD_RESETS);
+	pr_info("EVM: %s video input\n", label);
+
+	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
+}
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm365_evm_map_io(void)
+{
+	dm365_init();
+}
+
+static __init void dm365_evm_init(void)
+{
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	dm365evm_emac_configure();
+	dm365evm_mmc_configure();
+
+	davinci_setup_mmc(0, &dm365evm_mmc_config);
+
+	/* maybe setup mmc1/etc ... _after_ mmc0 */
+	evm_init_cpld();
+}
+
+static __init void dm365_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (0x80000100),
+	.map_io		= dm365_evm_map_io,
+	.init_irq	= dm365_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= dm365_evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 56c8cd01de9a..1213a0087ad4 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -28,6 +28,9 @@
 #include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+
+#include <media/tvp514x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -194,6 +197,72 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM6446 EVM",
+	.ccdc = "DM6446 CCDC",
+};
+
 static struct platform_device rtc_dev = {
 	.name           = "rtc_davinci_evm",
 	.id             = -1,
@@ -225,6 +294,8 @@ static struct platform_device ide_dev = {
 	},
 };
 
+static struct snd_platform_data dm644x_evm_snd_data;
+
 /*----------------------------------------------------------------------*/
 
 /*
@@ -557,10 +628,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
-	/* ALSO:
-	 * - tvl320aic33 audio codec (0x1b)
-	 * - tvp5146 video decoder (0x5d)
-	 */
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x1b),
+	},
 };
 
 /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
@@ -590,6 +660,8 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm644x_set_vpfe_config(&vpfe_cfg);
 	dm644x_init();
 }
 
@@ -666,6 +738,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 
 	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8657e72debc1..24e0e13b1492 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -34,6 +34,8 @@
 #include <linux/i2c/pcf857x.h>
 #include <linux/etherdevice.h>
 
+#include <media/tvp514x.h>
+
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -48,13 +50,89 @@
 #include <mach/mmc.h>
 #include <mach/emac.h>
 
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+/* CPLD Register 0 bits to control ATA */
+#define DM646X_EVM_ATA_RST		BIT(0)
+#define DM646X_EVM_ATA_PWD		BIT(1)
+
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+#define VIDCLKCTL_OFFSET	(DAVINCI_SYSTEM_MODULE_BASE + 0x38)
+#define VSCLKDIS_OFFSET		(DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
+#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8		(BIT(9))
+#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
+#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8		(BIT(13))
+#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
+
+#define VIDCH2CLK		(BIT(10))
+#define VIDCH3CLK		(BIT(11))
+#define VIDCH1CLK		(BIT(4))
+#define TVP7002_INPUT		(BIT(4))
+#define TVP5147_INPUT		(~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
+#define TVP5147_CH0		"tvp514x-0"
+#define TVP5147_CH1		"tvp514x-1"
+
+static void __iomem *vpif_vidclkctl_reg;
+static void __iomem *vpif_vsclkdis_reg;
+/* spin lock for updating above registers */
+static spinlock_t vpif_reg_lock;
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* CPLD Register 0 Client: used for I/O Control */
+static int cpld_reg0_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	if (HAS_ATA) {
+		u8 data;
+		struct i2c_msg msg[2] = {
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &data,
+			},
+			{
+				.addr = client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &data,
+			},
+		};
+
+		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
+		i2c_transfer(client->adapter, msg, 1);
+		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
+		i2c_transfer(client->adapter, msg + 1, 1);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id cpld_reg_ids[] = {
+	{ "cpld_reg0", 0, },
+	{ },
+};
+
+static struct i2c_driver dm6467evm_cpld_driver = {
+	.driver.name	= "cpld_reg0",
+	.id_table	= cpld_reg_ids,
+	.probe		= cpld_reg0_probe,
+};
+
 /* LEDS */
 
 static struct gpio_led evm_leds[] = {
@@ -206,6 +284,69 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static u8 dm646x_iis_serializer_direction[] = {
+       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
+};
+
+static u8 dm646x_dit_serializer_direction[] = {
+       TX_MODE,
+};
+
+static struct snd_platform_data dm646x_evm_snd_data[] = {
+	{
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0x400,
+		.op_mode        = DAVINCI_MCASP_IIS_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
+		.tdm_slots      = 2,
+		.serial_dir     = dm646x_iis_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+	{
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0,
+		.op_mode        = DAVINCI_MCASP_DIT_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
+		.tdm_slots      = 32,
+		.serial_dir     = dm646x_dit_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+};
+
+static struct i2c_client *cpld_client;
+
+static int cpld_video_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	cpld_client = client;
+	return 0;
+}
+
+static int __devexit cpld_video_remove(struct i2c_client *client)
+{
+	cpld_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id cpld_video_id[] = {
+	{ "cpld_video", 0 },
+	{ }
+};
+
+static struct i2c_driver cpld_video_driver = {
+	.driver = {
+		.name	= "cpld_video",
+	},
+	.probe		= cpld_video_probe,
+	.remove		= cpld_video_remove,
+	.id_table	= cpld_video_id,
+};
+
+static void evm_init_cpld(void)
+{
+	i2c_add_driver(&cpld_video_driver);
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -215,6 +356,15 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("pcf8574a", 0x38),
 		.platform_data	= &pcf_data,
 	},
+	{
+		I2C_BOARD_INFO("cpld_reg0", 0x3a),
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x18),
+	},
+	{
+		I2C_BOARD_INFO("cpld_video", 0x3b),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -222,10 +372,265 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay      = 0 /* usec */,
 };
 
+static int set_vpif_clock(int mux_mode, int hd)
+{
+	unsigned long flags;
+	unsigned int value;
+	int val = 0;
+	int err = 0;
+
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	/* disable the clock */
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	value |= (VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (mux_mode == 1)
+		val &= ~0x40;
+	else
+		val |= 0x40;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	value = __raw_readl(vpif_vidclkctl_reg);
+	value &= ~(VCH2CLK_MASK);
+	value &= ~(VCH3CLK_MASK);
+
+	if (hd >= 1)
+		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
+	else
+		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
+
+	__raw_writel(value, vpif_vidclkctl_reg);
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	/* enable the clock */
+	value &= ~(VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	return 0;
+}
+
+static struct vpif_subdev_info dm646x_vpif_subdev[] = {
+	{
+		.name	= "adv7343",
+		.board_info = {
+			I2C_BOARD_INFO("adv7343", 0x2a),
+		},
+	},
+	{
+		.name	= "ths7303",
+		.board_info = {
+			I2C_BOARD_INFO("ths7303", 0x2c),
+		},
+	},
+};
+
+static const char *output[] = {
+	"Composite",
+	"Component",
+	"S-Video",
+};
+
+static struct vpif_display_config dm646x_vpif_display_config = {
+	.set_clock	= set_vpif_clock,
+	.subdevinfo	= dm646x_vpif_subdev,
+	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
+	.output		= output,
+	.output_count	= ARRAY_SIZE(output),
+	.card_name	= "DM646x EVM",
+};
+
+/**
+ * setup_vpif_input_path()
+ * @channel: channel id (0 - CH0, 1 - CH1)
+ * @sub_dev_name: ptr sub device name
+ *
+ * This will set vpif input to capture data from tvp514x or
+ * tvp7002.
+ */
+static int setup_vpif_input_path(int channel, const char *sub_dev_name)
+{
+	int err = 0;
+	int val;
+
+	/* for channel 1, we don't do anything */
+	if (channel != 0)
+		return 0;
+
+	if (!cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
+	    !strcmp(sub_dev_name, TVP5147_CH1))
+		val &= TVP5147_INPUT;
+	else
+		val |= TVP7002_INPUT;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+	return 0;
+}
+
+/**
+ * setup_vpif_input_channel_mode()
+ * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
+ *
+ * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
+ */
+static int setup_vpif_input_channel_mode(int mux_mode)
+{
+	unsigned long flags;
+	int err = 0;
+	int val;
+	u32 value;
+
+	if (!vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	if (mux_mode) {
+		val &= VPIF_INPUT_TWO_CHANNEL;
+		value |= VIDCH1CLK;
+	} else {
+		val |= VPIF_INPUT_ONE_CHANNEL;
+		value &= ~VIDCH1CLK;
+	}
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static struct vpif_subdev_info vpif_capture_sdev_info[] = {
+	{
+		.name	= TVP5147_CH0,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+	{
+		.name	= TVP5147_CH1,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5c),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+};
+
+static const struct vpif_input dm6467_ch0_inputs[] = {
+	{
+		.input = {
+			.index = 0,
+			.name = "Composite",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH0,
+	},
+};
+
+static const struct vpif_input dm6467_ch1_inputs[] = {
+       {
+		.input = {
+			.index = 0,
+			.name = "S-Video",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH1,
+	},
+};
+
+static struct vpif_capture_config dm646x_vpif_capture_cfg = {
+	.setup_input_path = setup_vpif_input_path,
+	.setup_input_channel_mode = setup_vpif_input_channel_mode,
+	.subdev_info = vpif_capture_sdev_info,
+	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+	.chan_config[0] = {
+		.inputs = dm6467_ch0_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
+	},
+	.chan_config[1] = {
+		.inputs = dm6467_ch1_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
+	},
+};
+
+static void __init evm_init_video(void)
+{
+	vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4);
+	vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4);
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) {
+		pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n");
+		return;
+	}
+	spin_lock_init(&vpif_reg_lock);
+
+	dm646x_setup_vpif(&dm646x_vpif_display_config,
+			  &dm646x_vpif_capture_cfg);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6467evm_cpld_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+	evm_init_cpld();
+	evm_init_video();
 }
 
 static void __init davinci_map_io(void)
@@ -239,6 +644,11 @@ static __init void evm_init(void)
 
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
+	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
+
+	if (HAS_ATA)
+		dm646x_init_ide();
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 39bf321d70a2..83d54d50b5ea 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -227,7 +227,10 @@ static void __init clk_pll_init(struct clk *clk)
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
 		mult = __raw_readl(pll->base + PLLM);
-		mult = (mult & PLLM_PLLM_MASK) + 1;
+		if (cpu_is_davinci_dm365())
+			mult = 2 * (mult & PLLM_PLLM_MASK);
+		else
+			mult = (mult & PLLM_PLLM_MASK) + 1;
 	} else
 		bypass = 1;
 
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
new file mode 100644
index 000000000000..19b2748357fc
--- /dev/null
+++ b/arch/arm/mach-davinci/da830.c
@@ -0,0 +1,1205 @@
+/*
+ * TI DA830/OMAP L137 chip specific setup
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+#include <mach/asp.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/* Offsets of the 8 compare registers on the da830 */
+#define DA830_CMP12_0		0x60
+#define DA830_CMP12_1		0x64
+#define DA830_CMP12_2		0x68
+#define DA830_CMP12_3		0x6c
+#define DA830_CMP12_4		0x70
+#define DA830_CMP12_5		0x74
+#define DA830_CMP12_6		0x78
+#define DA830_CMP12_7		0x7c
+
+#define DA830_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA8XX_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA830_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr0_ss_clk = {
+	.name		= "scr0_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR0_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr1_ss_clk = {
+	.name		= "scr1_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR1_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr2_ss_clk = {
+	.name		= "scr2_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR2_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk dmax_clk = {
+	.name		= "dmax",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_DMAX,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc_clk = {
+	.name		= "tpcc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SPI0,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_SPI1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap0_clk = {
+	.name		= "ecap0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap1_clk = {
+	.name		= "ecap1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap2_clk = {
+	.name		= "ecap2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep0_clk = {
+	.name		= "eqep0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep1_clk = {
+	.name		= "eqep1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp0_clk = {
+	.name		= "mcasp0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp1_clk = {
+	.name		= "mcasp1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp2_clk = {
+	.name		= "mcasp2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb20_clk = {
+	.name		= "usb20",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_USB20,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk secu_mgr_clk = {
+	.name		= "secu_mgr",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_SECU_MGR,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb11_clk = {
+	.name		= "usb11",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_USB11,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct davinci_clk da830_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"scr0_ss",	&scr0_ss_clk),
+	CLK(NULL,		"scr1_ss",	&scr1_ss_clk),
+	CLK(NULL,		"scr2_ss",	&scr2_ss_clk),
+	CLK(NULL,		"dmax",		&dmax_clk),
+	CLK(NULL,		"tpcc",		&tpcc_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("dm_spi.0",		NULL,		&spi0_clk),
+	CLK("dm_spi.1",		NULL,		&spi1_clk),
+	CLK(NULL,		"ecap0",	&ecap0_clk),
+	CLK(NULL,		"ecap1",	&ecap1_clk),
+	CLK(NULL,		"ecap2",	&ecap2_clk),
+	CLK(NULL,		"pwm0",		&pwm0_clk),
+	CLK(NULL,		"pwm1",		&pwm1_clk),
+	CLK(NULL,		"pwm2",		&pwm2_clk),
+	CLK("eqep.0",		NULL,		&eqep0_clk),
+	CLK("eqep.1",		NULL,		&eqep1_clk),
+	CLK("da830_lcdc",	NULL,		&lcdc_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
+	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
+	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
+	CLK("musb_hdrc",	NULL,		&usb20_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"usb11",	&usb11_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+/*
+ * Device specific mux setup
+ *
+ *	     soc      description	mux    mode    mode   mux	dbg
+ *					reg   offset   mask   mode
+ */
+static const struct mux_config da830_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
+#endif
+};
+
+const short da830_emif25_pins[] __initdata = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
+	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
+	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
+	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
+	-1
+};
+
+const short da830_spi0_pins[] __initdata = {
+	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	-1
+};
+
+const short da830_spi1_pins[] __initdata = {
+	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
+	DA830_NSPI1_SCS_0,
+	-1
+};
+
+const short da830_mmc_sd_pins[] __initdata = {
+	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+	DA830_MMCSD_CMD,
+	-1
+};
+
+const short da830_uart0_pins[] __initdata = {
+	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
+	-1
+};
+
+const short da830_uart1_pins[] __initdata = {
+	DA830_UART1_RXD, DA830_UART1_TXD,
+	-1
+};
+
+const short da830_uart2_pins[] __initdata = {
+	DA830_UART2_RXD, DA830_UART2_TXD,
+	-1
+};
+
+const short da830_usb20_pins[] __initdata = {
+	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_usb11_pins[] __initdata = {
+	DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_uhpi_pins[] __initdata = {
+	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
+	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
+	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
+	-1
+};
+
+const short da830_cpgmac_pins[] __initdata = {
+	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	-1
+};
+
+const short da830_emif3c_pins[] __initdata = {
+	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
+	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
+	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
+	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
+	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
+	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
+	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
+	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
+	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
+	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
+	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
+	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
+	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
+	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
+	-1
+};
+
+const short da830_mcasp0_pins[] __initdata = {
+	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
+	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
+	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
+	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
+	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
+	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
+	-1
+};
+
+const short da830_mcasp1_pins[] __initdata = {
+	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
+	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
+	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
+	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
+	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
+	-1
+};
+
+const short da830_mcasp2_pins[] __initdata = {
+	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
+	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
+	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
+	-1
+};
+
+const short da830_i2c0_pins[] __initdata = {
+	DA830_I2C0_SDA, DA830_I2C0_SCL,
+	-1
+};
+
+const short da830_i2c1_pins[] __initdata = {
+	DA830_I2C1_SCL, DA830_I2C1_SDA,
+	-1
+};
+
+const short da830_lcdcntl_pins[] __initdata = {
+	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
+	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
+	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
+	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
+	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	-1
+};
+
+const short da830_pwm_pins[] __initdata = {
+	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
+	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
+	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
+	-1
+};
+
+const short da830_ecap0_pins[] __initdata = {
+	DA830_ECAP0_APWM0,
+	-1
+};
+
+const short da830_ecap1_pins[] __initdata = {
+	DA830_ECAP1_APWM1,
+	-1
+};
+
+const short da830_ecap2_pins[] __initdata = {
+	DA830_ECAP2_APWM2,
+	-1
+};
+
+const short da830_eqep0_pins[] __initdata = {
+	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
+	-1
+};
+
+const short da830_eqep1_pins[] __initdata = {
+	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
+	-1
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA830_MPUERR]		= 7,
+	[IRQ_DA830_IOPUERR]		= 7,
+	[IRQ_DA830_BOOTCFGERR]		= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA830_EHRPWM2]		= 7,
+	[IRQ_DA830_EHRPWM2TZ]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA830_EQEP0]		= 7,
+	[IRQ_DA830_EQEP1]		= 7,
+	[IRQ_DA830_T12CMPINT0_0]	= 7,
+	[IRQ_DA830_T12CMPINT1_0]	= 7,
+	[IRQ_DA830_T12CMPINT2_0]	= 7,
+	[IRQ_DA830_T12CMPINT3_0]	= 7,
+	[IRQ_DA830_T12CMPINT4_0]	= 7,
+	[IRQ_DA830_T12CMPINT5_0]	= 7,
+	[IRQ_DA830_T12CMPINT6_0]	= 7,
+	[IRQ_DA830_T12CMPINT7_0]	= 7,
+	[IRQ_DA830_T12CMPINT0_1]	= 7,
+	[IRQ_DA830_T12CMPINT1_1]	= 7,
+	[IRQ_DA830_T12CMPINT2_1]	= 7,
+	[IRQ_DA830_T12CMPINT3_1]	= 7,
+	[IRQ_DA830_T12CMPINT4_1]	= 7,
+	[IRQ_DA830_T12CMPINT5_1]	= 7,
+	[IRQ_DA830_T12CMPINT6_1]	= 7,
+	[IRQ_DA830_T12CMPINT7_1]	= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da830_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da830_psc_bases[] = {
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da830_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap l137",
+	},
+};
+
+static struct davinci_timer_instance da830_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_1,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event & clocksource
+ * T0_TOP: Timer 0, top			: Used by DSP
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da830_timer_info = {
+	.timers		= da830_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_BOT,
+};
+
+static struct davinci_soc_info davinci_soc_info_da830 = {
+	.io_desc		= da830_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
+	.ids			= da830_ids,
+	.ids_num		= ARRAY_SIZE(da830_ids),
+	.cpu_clks		= da830_clks,
+	.psc_bases		= da830_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da830_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da830_default_priorities,
+	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
+	.timer_info		= &da830_timer_info,
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_num		= 128,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da830_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da830);
+}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
new file mode 100644
index 000000000000..192d719a47df
--- /dev/null
+++ b/arch/arm/mach-davinci/da850.c
@@ -0,0 +1,820 @@
+/*
+ * TI DA850/OMAP-L138 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/da830.c
+ * Original Copyrights follow:
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DA850_PLL1_BASE		0x01e1a000
+#define DA850_TIMER64P2_BASE	0x01f0c000
+#define DA850_TIMER64P3_BASE	0x01f0d000
+
+#define DA850_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA8XX_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA850_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct pll_data pll1_data = {
+	.num		= 2,
+	.phys_base	= DA850_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.pll_data	= &pll1_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc0_clk = {
+	.name		= "tpcc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc1_clk = {
+	.name		= "tpcc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPCC1,
+	.flags		= CLK_PSC | ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk tptc2_clk = {
+	.name		= "tptc2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPTC2,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp_clk = {
+	.name		= "mcasp",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct davinci_clk da850_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK(NULL,		"pll1",		&pll1_clk),
+	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
+	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
+	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
+	CLK(NULL,		"pll1_sysclk4",	&pll1_sysclk4),
+	CLK(NULL,		"pll1_sysclk5",	&pll1_sysclk5),
+	CLK(NULL,		"pll1_sysclk6",	&pll1_sysclk6),
+	CLK(NULL,		"pll1_sysclk7",	&pll1_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"tpcc0",	&tpcc0_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK(NULL,		"tpcc1",	&tpcc1_clk),
+	CLK(NULL,		"tptc2",	&tptc2_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
+	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+/*
+ * Device specific mux setup
+ *
+ *		soc	description	mux	mode	mode	mux	dbg
+ *					reg	offset	mask	mode
+ */
+static const struct mux_config da850_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	/* UART0 function */
+	MUX_CFG(DA850, NUART0_CTS,	3,	24,	15,	2,	false)
+	MUX_CFG(DA850, NUART0_RTS,	3,	28,	15,	2,	false)
+	MUX_CFG(DA850, UART0_RXD,	3,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART0_TXD,	3,	20,	15,	2,	false)
+	/* UART1 function */
+	MUX_CFG(DA850, UART1_RXD,	4,	24,	15,	2,	false)
+	MUX_CFG(DA850, UART1_TXD,	4,	28,	15,	2,	false)
+	/* UART2 function */
+	MUX_CFG(DA850, UART2_RXD,	4,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART2_TXD,	4,	20,	15,	2,	false)
+	/* I2C1 function */
+	MUX_CFG(DA850, I2C1_SCL,	4,	16,	15,	4,	false)
+	MUX_CFG(DA850, I2C1_SDA,	4,	20,	15,	4,	false)
+	/* I2C0 function */
+	MUX_CFG(DA850, I2C0_SDA,	4,	12,	15,	2,	false)
+	MUX_CFG(DA850, I2C0_SCL,	4,	8,	15,	2,	false)
+	/* EMAC function */
+	MUX_CFG(DA850, MII_TXEN,	2,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXCLK,	2,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_COL,		2,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_3,	2,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_2,	2,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_1,	2,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_0,	2,	28,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXCLK,	3,	0,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXDV,	3,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXER,	3,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_CRS,		3,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_3,	3,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_2,	3,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_1,	3,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
+	/* McASP function */
+	MUX_CFG(DA850,	ACLKR,		0,	0,	15,	1,	false)
+	MUX_CFG(DA850,	ACLKX,		0,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AFSR,		0,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AFSX,		0,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKR,		0,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKX,		0,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AMUTE,		0,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_15,		1,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_14,		1,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_13,		1,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_12,		1,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_11,		1,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_10,		1,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_9,		1,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_8,		1,	28,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_7,		2,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_6,		2,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_5,		2,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_4,		2,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_3,		2,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_2,		2,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_1,		2,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_0,		2,	28,	15,	1,	false)
+	/* LCD function */
+	MUX_CFG(DA850, LCD_D_7,		16,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_6,		16,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_5,		16,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_4,		16,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_3,		16,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_2,		16,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_1,		17,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_0,		17,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_15,	17,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_14,	17,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_13,	17,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_12,	17,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_11,	17,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_10,	17,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_9,		18,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_8,		18,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_PCLK,	18,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_HSYNC,	19,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_VSYNC,	19,	4,	15,	2,	false)
+	MUX_CFG(DA850, NLCD_AC_ENB_CS,	19,	24,	15,	2,	false)
+	/* MMC/SD0 function */
+	MUX_CFG(DA850, MMCSD0_DAT_0,	10,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_1,	10,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_2,	10,	16,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
+	/* EMIF2.5/EMIFA function */
+	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_5,		9,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_4,		9,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_3,		9,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_2,		9,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_1,		9,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_0,		9,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_1,		12,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_2,		12,	20,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_3,	7,	4,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_4,	7,	8,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_WE,		7,	16,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_OE,		7,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_0,		12,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_3,		12,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_4,		12,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_5,		12,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_6,		12,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_7,		12,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_8,		11,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_9,		11,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_10,	11,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_11,	11,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_12,	11,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_13,	11,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_14,	11,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_15,	11,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_16,	10,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_17,	10,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_18,	10,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_19,	10,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_20,	10,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_21,	10,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_22,	10,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_23,	10,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_8,		8,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_9,		8,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_10,	8,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_11,	8,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_12,	8,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_13,	8,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_14,	8,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_15,	8,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_BA_1,	5,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_CLK,		6,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_WAIT_1,	6,	24,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_2,	7,	0,	15,	1,	false)
+	/* GPIO function */
+	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
+	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
+#endif
+};
+
+const short da850_uart0_pins[] __initdata = {
+	DA850_NUART0_CTS, DA850_NUART0_RTS, DA850_UART0_RXD, DA850_UART0_TXD,
+	-1
+};
+
+const short da850_uart1_pins[] __initdata = {
+	DA850_UART1_RXD, DA850_UART1_TXD,
+	-1
+};
+
+const short da850_uart2_pins[] __initdata = {
+	DA850_UART2_RXD, DA850_UART2_TXD,
+	-1
+};
+
+const short da850_i2c0_pins[] __initdata = {
+	DA850_I2C0_SDA, DA850_I2C0_SCL,
+	-1
+};
+
+const short da850_i2c1_pins[] __initdata = {
+	DA850_I2C1_SCL, DA850_I2C1_SDA,
+	-1
+};
+
+const short da850_cpgmac_pins[] __initdata = {
+	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
+const short da850_mcasp_pins[] __initdata = {
+	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
+	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
+	DA850_AXR_11, DA850_AXR_12,
+	-1
+};
+
+const short da850_lcdcntl_pins[] __initdata = {
+	DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
+	DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
+	DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
+	DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
+	DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
+	DA850_GPIO8_10,
+	-1
+};
+
+const short da850_mmcsd0_pins[] __initdata = {
+	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
+	DA850_GPIO4_0, DA850_GPIO4_1,
+	-1
+};
+
+const short da850_nand_pins[] __initdata = {
+	DA850_EMA_D_7, DA850_EMA_D_6, DA850_EMA_D_5, DA850_EMA_D_4,
+	DA850_EMA_D_3, DA850_EMA_D_2, DA850_EMA_D_1, DA850_EMA_D_0,
+	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
+	DA850_NEMA_WE, DA850_NEMA_OE,
+	-1
+};
+
+const short da850_nor_pins[] __initdata = {
+	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
+	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
+	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
+	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
+	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
+	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
+	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
+	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
+	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
+	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
+	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
+	DA850_EMA_A_22, DA850_EMA_A_23,
+	-1
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA850_MPUADDRERR0]		= 7,
+	[IRQ_DA850_MPUPROTERR0]		= 7,
+	[IRQ_DA850_IOPUADDRERR0]	= 7,
+	[IRQ_DA850_IOPUPROTERR0]	= 7,
+	[IRQ_DA850_IOPUADDRERR1]	= 7,
+	[IRQ_DA850_IOPUPROTERR1]	= 7,
+	[IRQ_DA850_IOPUADDRERR2]	= 7,
+	[IRQ_DA850_IOPUPROTERR2]	= 7,
+	[IRQ_DA850_BOOTCFG_ADDR_ERR]	= 7,
+	[IRQ_DA850_BOOTCFG_PROT_ERR]	= 7,
+	[IRQ_DA850_MPUADDRERR1]		= 7,
+	[IRQ_DA850_MPUPROTERR1]		= 7,
+	[IRQ_DA850_IOPUADDRERR3]	= 7,
+	[IRQ_DA850_IOPUPROTERR3]	= 7,
+	[IRQ_DA850_IOPUADDRERR4]	= 7,
+	[IRQ_DA850_IOPUPROTERR4]	= 7,
+	[IRQ_DA850_IOPUADDRERR5]	= 7,
+	[IRQ_DA850_IOPUPROTERR5]	= 7,
+	[IRQ_DA850_MIOPU_BOOTCFG_ERR]	= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA850_SATAINT]		= 7,
+	[IRQ_DA850_TINT12_2]		= 7,
+	[IRQ_DA850_TINT34_2]		= 7,
+	[IRQ_DA850_TINTALL_2]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA850_MMCSDINT0_1]		= 7,
+	[IRQ_DA850_MMCSDINT1_1]		= 7,
+	[IRQ_DA850_T12CMPINT0_2]	= 7,
+	[IRQ_DA850_T12CMPINT1_2]	= 7,
+	[IRQ_DA850_T12CMPINT2_2]	= 7,
+	[IRQ_DA850_T12CMPINT3_2]	= 7,
+	[IRQ_DA850_T12CMPINT4_2]	= 7,
+	[IRQ_DA850_T12CMPINT5_2]	= 7,
+	[IRQ_DA850_T12CMPINT6_2]	= 7,
+	[IRQ_DA850_T12CMPINT7_2]	= 7,
+	[IRQ_DA850_T12CMPINT0_3]	= 7,
+	[IRQ_DA850_T12CMPINT1_3]	= 7,
+	[IRQ_DA850_T12CMPINT2_3]	= 7,
+	[IRQ_DA850_T12CMPINT3_3]	= 7,
+	[IRQ_DA850_T12CMPINT4_3]	= 7,
+	[IRQ_DA850_T12CMPINT5_3]	= 7,
+	[IRQ_DA850_T12CMPINT6_3]	= 7,
+	[IRQ_DA850_T12CMPINT7_3]	= 7,
+	[IRQ_DA850_RPIINT]		= 7,
+	[IRQ_DA850_VPIFINT]		= 7,
+	[IRQ_DA850_CCINT1]		= 7,
+	[IRQ_DA850_CCERRINT1]		= 7,
+	[IRQ_DA850_TCERRINT2]		= 7,
+	[IRQ_DA850_TINT12_3]		= 7,
+	[IRQ_DA850_TINT34_3]		= 7,
+	[IRQ_DA850_TINTALL_3]		= 7,
+	[IRQ_DA850_MCBSP0RINT]		= 7,
+	[IRQ_DA850_MCBSP0XINT]		= 7,
+	[IRQ_DA850_MCBSP1RINT]		= 7,
+	[IRQ_DA850_MCBSP1XINT]		= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da850_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da850_psc_bases[] = {
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da850_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7d1,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA850,
+		.name		= "da850/omap-l138",
+	},
+};
+
+static struct davinci_timer_instance da850_timer_instance[4] = {
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P2_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_2,
+		.top_irq	= IRQ_DA850_TINT34_2,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P3_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_3,
+		.top_irq	= IRQ_DA850_TINT34_3,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event
+ * T0_TOP: Timer 0, top			: Used for clocksource
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da850_timer_info = {
+	.timers		= da850_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct davinci_soc_info davinci_soc_info_da850 = {
+	.io_desc		= da850_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
+	.ids			= da850_ids,
+	.ids_num		= ARRAY_SIZE(da850_ids),
+	.cpu_clks		= da850_clks,
+	.psc_bases		= da850_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da850_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da850_default_priorities,
+	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
+	.timer_info		= &da850_timer_info,
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_num		= 144,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da850_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da850);
+}
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
new file mode 100644
index 000000000000..58ad5b66fd60
--- /dev/null
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -0,0 +1,450 @@
+/*
+ * DA8XX/OMAP L1XX platform device data
+ *
+ * Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com>
+ * Derived from code that was:
+ *	Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+#include <video/da8xx-fb.h>
+
+#include "clock.h"
+
+#define DA8XX_TPCC_BASE			0x01c00000
+#define DA8XX_TPTC0_BASE		0x01c08000
+#define DA8XX_TPTC1_BASE		0x01c08400
+#define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
+#define DA8XX_I2C0_BASE			0x01c22000
+#define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
+#define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
+#define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
+#define DA8XX_EMAC_MDIO_BASE		0x01e24000
+#define DA8XX_GPIO_BASE			0x01e26000
+#define DA8XX_I2C1_BASE			0x01e28000
+
+#define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
+#define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
+#define DA8XX_EMAC_RAM_OFFSET		0x0000
+#define DA8XX_MDIO_REG_OFFSET		0x4000
+#define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
+
+static struct plat_serial8250_port da8xx_serial_pdata[] = {
+	{
+		.mapbase	= DA8XX_UART0_BASE,
+		.irq		= IRQ_DA8XX_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART1_BASE,
+		.irq		= IRQ_DA8XX_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART2_BASE,
+		.irq		= IRQ_DA8XX_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags	= 0,
+	},
+};
+
+struct platform_device da8xx_serial_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM,
+	.dev	= {
+		.platform_data	= da8xx_serial_pdata,
+	},
+};
+
+static const s8 da8xx_dma_chan_no_event[] = {
+	20, 21,
+	-1
+};
+
+static const s8 da8xx_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1}
+};
+
+static const s8 da8xx_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1}
+};
+
+static struct edma_soc_info da8xx_edma_info[] = {
+	{
+		.n_channel		= 32,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= da8xx_dma_chan_no_event,
+		.queue_tc_mapping	= da8xx_queue_tc_mapping,
+		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	},
+};
+
+static struct resource da8xx_edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= DA8XX_TPCC_BASE,
+		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= DA8XX_TPTC0_BASE,
+		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= DA8XX_TPTC1_BASE,
+		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_DA8XX_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_DA8XX_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_edma_device = {
+	.name		= "edma",
+	.id		= -1,
+	.dev = {
+		.platform_data	= da8xx_edma_info,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_edma_resources),
+	.resource	= da8xx_edma_resources,
+};
+
+int __init da8xx_register_edma(void)
+{
+	return platform_device_register(&da8xx_edma_device);
+}
+
+static struct resource da8xx_i2c_resources0[] = {
+	{
+		.start	= DA8XX_I2C0_BASE,
+		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT0,
+		.end	= IRQ_DA8XX_I2CINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device0 = {
+	.name		= "i2c_davinci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
+	.resource	= da8xx_i2c_resources0,
+};
+
+static struct resource da8xx_i2c_resources1[] = {
+	{
+		.start	= DA8XX_I2C1_BASE,
+		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT1,
+		.end	= IRQ_DA8XX_I2CINT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device1 = {
+	.name		= "i2c_davinci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
+	.resource	= da8xx_i2c_resources1,
+};
+
+int __init da8xx_register_i2c(int instance,
+		struct davinci_i2c_platform_data *pdata)
+{
+	struct platform_device *pdev;
+
+	if (instance == 0)
+		pdev = &da8xx_i2c_device0;
+	else if (instance == 1)
+		pdev = &da8xx_i2c_device1;
+	else
+		return -EINVAL;
+
+	pdev->dev.platform_data = pdata;
+	return platform_device_register(pdev);
+}
+
+static struct resource da8xx_watchdog_resources[] = {
+	{
+		.start	= DA8XX_WDOG_BASE,
+		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
+	.resource	= da8xx_watchdog_resources,
+};
+
+int __init da8xx_register_watchdog(void)
+{
+	return platform_device_register(&davinci_wdt_device);
+}
+
+static struct resource da8xx_emac_resources[] = {
+	{
+		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
+		.end	= DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_TX_PULSE,
+		.end	= IRQ_DA8XX_C0_TX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_MISC_PULSE,
+		.end	= IRQ_DA8XX_C0_MISC_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct emac_platform_data da8xx_emac_pdata = {
+	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
+	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
+	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
+	.mdio_reg_offset	= DA8XX_MDIO_REG_OFFSET,
+	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct platform_device da8xx_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &da8xx_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
+	.resource	= da8xx_emac_resources,
+};
+
+static struct resource da830_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
+		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da830_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
+	.resource	= da830_mcasp1_resources,
+};
+
+static struct resource da850_mcasp_resources[] = {
+	{
+		.name	= "mcasp",
+		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
+		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da850_mcasp_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
+	.resource	= da850_mcasp_resources,
+};
+
+int __init da8xx_register_emac(void)
+{
+	return platform_device_register(&da8xx_emac_device);
+}
+
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
+{
+	/* DA830/OMAP-L137 has 3 instances of McASP */
+	if (cpu_is_davinci_da830() && id == 1) {
+		da830_mcasp1_device.dev.platform_data = pdata;
+		platform_device_register(&da830_mcasp1_device);
+	} else if (cpu_is_davinci_da850()) {
+		da850_mcasp_device.dev.platform_data = pdata;
+		platform_device_register(&da850_mcasp_device);
+	}
+}
+
+static const struct display_panel disp_panel = {
+	QVGA,
+	16,
+	16,
+	COLOR_ACTIVE,
+};
+
+static struct lcd_ctrl_config lcd_cfg = {
+	&disp_panel,
+	.ac_bias		= 255,
+	.ac_bias_intrpt		= 0,
+	.dma_burst_sz		= 16,
+	.bpp			= 16,
+	.fdd			= 255,
+	.tft_alt_mode		= 0,
+	.stn_565_mode		= 0,
+	.mono_8bit_mode		= 0,
+	.invert_line_clock	= 1,
+	.invert_frm_clock	= 1,
+	.sync_edge		= 0,
+	.sync_ctrl		= 1,
+	.raster_order		= 0,
+};
+
+static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
+	.manu_name = "sharp",
+	.controller_data = &lcd_cfg,
+	.type = "Sharp_LK043T1DG01",
+};
+
+static struct resource da8xx_lcdc_resources[] = {
+	[0] = { /* registers */
+		.start  = DA8XX_LCD_CNTRL_BASE,
+		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = { /* interrupt */
+		.start  = IRQ_DA8XX_LCDINT,
+		.end    = IRQ_DA8XX_LCDINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da850_lcdc_device = {
+	.name		= "da8xx_lcdc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
+	.resource	= da8xx_lcdc_resources,
+	.dev = {
+		.platform_data = &da850_evm_lcdc_pdata,
+	}
+};
+
+int __init da8xx_register_lcdc(void)
+{
+	return platform_device_register(&da850_lcdc_device);
+}
+
+static struct resource da8xx_mmcsd0_resources[] = {
+	{		/* registers */
+		.start	= DA8XX_MMCSD0_BASE,
+		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{		/* interrupt */
+		.start	= IRQ_DA8XX_MMCSDINT0,
+		.end	= IRQ_DA8XX_MMCSDINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{		/* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, 16),
+		.end	= EDMA_CTLR_CHAN(0, 16),
+		.flags	= IORESOURCE_DMA,
+	},
+	{		/* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, 17),
+		.end	= EDMA_CTLR_CHAN(0, 17),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da8xx_mmcsd0_device = {
+	.name		= "davinci_mmc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
+	.resource	= da8xx_mmcsd0_resources,
+};
+
+int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
+{
+	da8xx_mmcsd0_device.dev.platform_data = config;
+	return platform_device_register(&da8xx_mmcsd0_device);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index de16f347566a..a55b650db71e 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -31,6 +31,8 @@
 #define DAVINCI_MMCSD0_BASE	     0x01E10000
 #define DM355_MMCSD0_BASE	     0x01E11000
 #define DM355_MMCSD1_BASE	     0x01E00000
+#define DM365_MMCSD0_BASE	     0x01D11000
+#define DM365_MMCSD1_BASE	     0x01D00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -82,10 +84,10 @@ static struct resource mmcsd0_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = DAVINCI_DMA_MMCRXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = DAVINCI_DMA_MMCTXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -119,10 +121,10 @@ static struct resource mmcsd1_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = 30,	/* rx */
+		.start = EDMA_CTLR_CHAN(0, 30),	/* rx */
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = 31,	/* tx */
+		.start = EDMA_CTLR_CHAN(0, 31),	/* tx */
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -154,19 +156,31 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 	 */
 	switch (module) {
 	case 1:
-		if (!cpu_is_davinci_dm355())
+		if (cpu_is_davinci_dm355()) {
+			/* REVISIT we may not need all these pins if e.g. this
+			 * is a hard-wired SDIO device...
+			 */
+			davinci_cfg_reg(DM355_SD1_CMD);
+			davinci_cfg_reg(DM355_SD1_CLK);
+			davinci_cfg_reg(DM355_SD1_DATA0);
+			davinci_cfg_reg(DM355_SD1_DATA1);
+			davinci_cfg_reg(DM355_SD1_DATA2);
+			davinci_cfg_reg(DM355_SD1_DATA3);
+		} else if (cpu_is_davinci_dm365()) {
+			void __iomem *pupdctl1 =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
+
+			/* Configure pull down control */
+			__raw_writel((__raw_readl(pupdctl1) & ~0x400),
+					pupdctl1);
+
+			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
+			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+		} else
 			break;
 
-		/* REVISIT we may not need all these pins if e.g. this
-		 * is a hard-wired SDIO device...
-		 */
-		davinci_cfg_reg(DM355_SD1_CMD);
-		davinci_cfg_reg(DM355_SD1_CLK);
-		davinci_cfg_reg(DM355_SD1_DATA0);
-		davinci_cfg_reg(DM355_SD1_DATA1);
-		davinci_cfg_reg(DM355_SD1_DATA2);
-		davinci_cfg_reg(DM355_SD1_DATA3);
-
 		pdev = &davinci_mmcsd1_device;
 		break;
 	case 0:
@@ -180,9 +194,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 			/* enable RX EDMA */
 			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		}
-
-		else if (cpu_is_davinci_dm644x()) {
+		} else if (cpu_is_davinci_dm365()) {
+			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
+		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
 			void __iomem *base =
 				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
@@ -216,6 +233,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 static struct resource wdt_resources[] = {
 	{
+		.start	= DAVINCI_WDOG_BASE,
+		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -229,11 +248,6 @@ struct platform_device davinci_wdt_device = {
 
 static void davinci_init_wdt(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
-	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
-
 	platform_device_register(&davinci_wdt_device);
 }
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index baaaf328de2e..059670018aff 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -30,6 +30,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -360,8 +361,8 @@ static struct davinci_clk dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("soc-audio.0", NULL, &asp0_clk),
-	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-asp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK(NULL, "spi0", &spi0_clk),
@@ -481,6 +482,20 @@ INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
 EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
 EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
 EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+
+MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+
+MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
+MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
 #endif
 };
 
@@ -558,17 +573,38 @@ static const s8 dma_chan_dm355_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm355_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm355_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm355_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm355_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -586,10 +622,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -598,12 +636,98 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm355_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm355_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm355_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
 
+static struct resource dm355_asp1_resources[] = {
+	{
+		.start	= DAVINCI_ASP1_BASE,
+		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_TX,
+		.end	= DAVINCI_DMA_ASP1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_RX,
+		.end	= DAVINCI_DMA_ASP1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm355_asp1_device = {
+	.name		= "davinci-asp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
+	.resource	= dm355_asp1_resources,
+};
+
+static struct resource dm355_vpss_resources[] = {
+	{
+		/* VPSS BL Base address */
+		.name		= "vpss",
+		.start          = 0x01c70800,
+		.end            = 0x01c70800 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		/* VPSS CLK Base address */
+		.name		= "vpss",
+		.start          = 0x01c70000,
+		.end            = 0x01c70000 + 0xf,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm355_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm355_vpss",
+	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
+	.resource		= dm355_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	/* CCDC Base address */
+	{
+		.flags          = IORESOURCE_MEM,
+		.start          = 0x01c70600,
+		.end            = 0x01c70600 + 0x1ff,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm355_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -704,7 +828,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM355_GPIOBNK0,
@@ -713,6 +836,19 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
+{
+	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
+	if (evt_enable & ASP1_TX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+
+	if (evt_enable & ASP1_RX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+	dm355_asp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm355_asp1_device);
+}
+
 void __init dm355_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm355);
@@ -725,6 +861,20 @@ static int __init dm355_init_devices(void)
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
+	platform_device_register(&dm355_vpss_device);
+	/*
+	 * setup Mux configuration for vpfe input and register
+	 * vpfe capture platform device
+	 */
+	davinci_cfg_reg(DM355_VIN_PCLK);
+	davinci_cfg_reg(DM355_VIN_CAM_WEN);
+	davinci_cfg_reg(DM355_VIN_CAM_VD);
+	davinci_cfg_reg(DM355_VIN_CAM_HD);
+	davinci_cfg_reg(DM355_VIN_YIN_EN);
+	davinci_cfg_reg(DM355_VIN_CINL_EN);
+	davinci_cfg_reg(DM355_VIN_CINH_EN);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
new file mode 100644
index 000000000000..e81517434703
--- /dev/null
+++ b/arch/arm/mach-davinci/dm365.c
@@ -0,0 +1,926 @@
+/*
+ * TI DaVinci DM365 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm365.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
+
+static struct pll_data pll1_data = {
+	.num		= 1,
+	.phys_base	= DAVINCI_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num		= 2,
+	.phys_base	= DAVINCI_PLL2_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DM365_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name		= "pll1_sysclkbp",
+	.parent		= &pll1_clk,
+	.flags 		= CLK_PLL | PRE_PLL,
+	.div_reg	= BPDIV
+};
+
+static struct clk clkout0_clk = {
+	.name		= "clkout0",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name		= "pll1_sysclk1",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll1_sysclk6",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name		= "pll1_sysclk8",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name		= "pll1_sysclk9",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk pll2_clk = {
+	.name		= "pll2",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll2_data,
+};
+
+static struct clk pll2_aux_clk = {
+	.name		= "pll2_aux_clk",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk clkout1_clk = {
+	.name		= "clkout1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name		= "pll2_sysclk1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+	.name		= "pll2_sysclk2",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll2_sysclk3 = {
+	.name		= "pll2_sysclk3",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll2_sysclk4 = {
+	.name		= "pll2_sysclk4",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll2_sysclk5 = {
+	.name		= "pll2_sysclk5",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll2_sysclk6 = {
+	.name		= "pll2_sysclk6",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll2_sysclk7 = {
+	.name		= "pll2_sysclk7",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll2_sysclk8 = {
+	.name		= "pll2_sysclk8",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll2_sysclk9 = {
+	.name		= "pll2_sysclk9",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk vpss_dac_clk = {
+	.name		= "vpss_dac",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_DAC_CLK,
+};
+
+static struct clk vpss_master_clk = {
+	.name		= "vpss_master",
+	.parent		= &pll1_sysclk5,
+	.lpsc		= DM365_LPSC_VPSSMSTR,
+	.flags		= CLK_PSC,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm_clk",
+	.parent		= &pll2_sysclk2,
+	.lpsc		= DAVINCI_LPSC_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_UART1,
+};
+
+static struct clk i2c_clk = {
+	.name		= "i2c",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_I2C,
+};
+
+static struct clk mmcsd0_clk = {
+	.name		= "mmcsd0",
+	.parent		= &pll1_sysclk8,
+	.lpsc		= DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name		= "mmcsd1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name		= "spi2",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI2,
+};
+
+static struct clk spi3_clk = {
+	.name		= "spi3",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI3,
+};
+
+static struct clk spi4_clk = {
+	.name		= "spi4",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_SPI4,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name		= "pwm3",
+	.parent		= &ref_clk,
+	.lpsc		= DM365_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name		= "timer0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name		= "timer1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name		= "timer2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER2,
+	.usecount	= 1,
+};
+
+static struct clk timer3_clk = {
+	.name		= "timer3",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_TIMER3,
+};
+
+static struct clk usb_clk = {
+	.name		= "usb",
+	.parent		= &pll2_sysclk1,
+	.lpsc		= DAVINCI_LPSC_USB,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_EMAC,
+};
+
+static struct clk voicecodec_clk = {
+	.name		= "voice_codec",
+	.parent		= &pll2_sysclk4,
+	.lpsc		= DM365_LPSC_VOICE_CODEC,
+};
+
+static struct clk asp0_clk = {
+	.name		= "asp0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_McBSP1,
+};
+
+static struct clk rto_clk = {
+	.name		= "rto",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_RTO,
+};
+
+static struct clk mjcp_clk = {
+	.name		= "mjcp",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_MJCP,
+};
+
+static struct davinci_clk dm365_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "clkout0", &clkout0_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
+	CLK(NULL, "pll1_sysclk8", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk9", &pll1_sysclk9),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_aux", &pll2_aux_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+	CLK(NULL, "pll2_sysclk3", &pll2_sysclk3),
+	CLK(NULL, "pll2_sysclk4", &pll2_sysclk4),
+	CLK(NULL, "pll2_sysclk5", &pll2_sysclk5),
+	CLK(NULL, "pll2_sysclk6", &pll2_sysclk6),
+	CLK(NULL, "pll2_sysclk7", &pll2_sysclk7),
+	CLK(NULL, "pll2_sysclk8", &pll2_sysclk8),
+	CLK(NULL, "pll2_sysclk9", &pll2_sysclk9),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK("spi_davinci.0", NULL, &spi0_clk),
+	CLK("spi_davinci.1", NULL, &spi1_clk),
+	CLK("spi_davinci.2", NULL, &spi2_clk),
+	CLK("spi_davinci.3", NULL, &spi3_clk),
+	CLK("spi_davinci.4", NULL, &spi4_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("voice_codec", NULL, &voicecodec_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+
+static const struct mux_config dm365_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
+
+MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
+
+MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
+MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
+
+MUX_CFG(DM365,	AEMIF_AR,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
+
+MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
+
+MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
+
+MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
+MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
+MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
+MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
+
+MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
+
+MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
+
+MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
+MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
+MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
+MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
+MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
+MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
+
+MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
+
+MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
+
+MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
+MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
+MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
+
+MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
+MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
+
+INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
+INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
+INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
+INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
+#endif
+};
+
+static struct emac_platform_data dm365_emac_pdata = {
+	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM365_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm365_emac_resources[] = {
+	{
+		.start	= DM365_EMAC_BASE,
+		.end	= DM365_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXTHRESH,
+		.end	= IRQ_DM365_EMAC_RXTHRESH,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXPULSE,
+		.end	= IRQ_DM365_EMAC_RXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_TXPULSE,
+		.end	= IRQ_DM365_EMAC_TXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_MISCPULSE,
+		.end	= IRQ_DM365_EMAC_MISCPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm365_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
+	.resource	= dm365_emac_resources,
+};
+
+static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]			= 2,
+	[IRQ_VDINT1]			= 6,
+	[IRQ_VDINT2]			= 6,
+	[IRQ_HISTINT]			= 6,
+	[IRQ_H3AINT]			= 6,
+	[IRQ_PRVUINT]			= 6,
+	[IRQ_RSZINT]			= 6,
+	[IRQ_DM365_INSFINT]		= 7,
+	[IRQ_VENCINT]			= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_DM365_IMCOPINT]		= 4,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM365_RTOINT]		= 7,
+	[IRQ_DM365_TINT5]		= 7,
+	[IRQ_DM365_TINT6]		= 5,
+	[IRQ_CCINT0]			= 5,
+	[IRQ_CCERRINT]			= 5,
+	[IRQ_TCERRINT0]			= 5,
+	[IRQ_TCERRINT]			= 7,
+	[IRQ_PSCIN]			= 4,
+	[IRQ_DM365_SPINT2_1]		= 7,
+	[IRQ_DM365_TINT7]		= 7,
+	[IRQ_DM365_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM365_MMCINT1]		= 7,
+	[IRQ_DM365_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 4,
+	[IRQ_AEMIFINT]			= 2,
+	[IRQ_DM365_SDIOINT1]		= 2,
+	[IRQ_TINT0_TINT12]		= 7,
+	[IRQ_TINT0_TINT34]		= 7,
+	[IRQ_TINT1_TINT12]		= 7,
+	[IRQ_TINT1_TINT34]		= 7,
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 3,
+	[IRQ_PWMINT2]			= 3,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM365_SPIINT0_0]		= 3,
+	[IRQ_DM365_SPIINT3_0]		= 3,
+	[IRQ_DM365_GPIO0]		= 3,
+	[IRQ_DM365_GPIO1]		= 7,
+	[IRQ_DM365_GPIO2]		= 4,
+	[IRQ_DM365_GPIO3]		= 4,
+	[IRQ_DM365_GPIO4]		= 7,
+	[IRQ_DM365_GPIO5]		= 7,
+	[IRQ_DM365_GPIO6]		= 7,
+	[IRQ_DM365_GPIO7]		= 7,
+	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
+	[IRQ_DM365_EMAC_RXPULSE]	= 7,
+	[IRQ_DM365_EMAC_TXPULSE]	= 7,
+	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
+	[IRQ_DM365_GPIO12]		= 7,
+	[IRQ_DM365_GPIO13]		= 7,
+	[IRQ_DM365_GPIO14]		= 7,
+	[IRQ_DM365_GPIO15]		= 7,
+	[IRQ_DM365_KEYINT]		= 7,
+	[IRQ_DM365_TCERRINT2]		= 7,
+	[IRQ_DM365_TCERRINT3]		= 7,
+	[IRQ_DM365_EMUINT]		= 7,
+};
+
+/* Four Transfer Controllers on DM365 */
+static const s8
+dm365_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm365_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 7},
+	{1, 7},
+	{2, 7},
+	{3, 0},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm365_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 256,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.queue_tc_mapping	= dm365_queue_tc_mapping,
+		.queue_priority_mapping	= dm365_queue_priority_mapping,
+		.default_queue		= EVENTQ_2,
+	},
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm365_edma_device = {
+	.name			= "edma",
+	.id			= 0,
+	.dev.platform_data	= dm365_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+static struct map_desc dm365_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm365_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365_rev1.1",
+	},
+	{
+		.variant	= 0x8,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365_rev1.2",
+	},
+};
+
+static void __iomem *dm365_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+struct davinci_timer_info dm365_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm365_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm365_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm365_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm365 = {
+	.io_desc		= dm365_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm365_ids,
+	.ids_num		= ARRAY_SIZE(dm365_ids),
+	.cpu_clks		= dm365_clks,
+	.psc_bases		= dm365_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm365_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm365_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm365_timer_info,
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= IRQ_DM365_GPIO0,
+	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
+	.serial_dev		= &dm365_serial_device,
+	.emac_pdata		= &dm365_emac_pdata,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm365_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm365);
+}
+
+static int __init dm365_init_devices(void)
+{
+	if (!cpu_is_davinci_dm365())
+		return 0;
+
+	davinci_cfg_reg(DM365_INT_EDMA_CC);
+	platform_device_register(&dm365_edma_device);
+	platform_device_register(&dm365_emac_device);
+
+	return 0;
+}
+postcore_initcall(dm365_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index fb5449b3c97b..d6e0fa5a8d8a 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -27,6 +27,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -303,7 +304,7 @@ struct davinci_clk dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("soc-audio.0", NULL, &asp_clk),
+	CLK("davinci-asp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -484,17 +485,38 @@ static const s8 dma_chan_dm644x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm644x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm644x_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm644x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm644x_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -512,10 +534,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -524,12 +548,91 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm644x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm644x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm644x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
 
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
+static struct resource dm644x_asp_resources[] = {
+	{
+		.start	= DAVINCI_ASP0_BASE,
+		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_TX,
+		.end	= DAVINCI_DMA_ASP0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_RX,
+		.end	= DAVINCI_DMA_ASP0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm644x_asp_device = {
+	.name		= "davinci-asp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
+	.resource	= dm644x_asp_resources,
+};
+
+static struct resource dm644x_vpss_resources[] = {
+	{
+		/* VPSS Base address */
+		.name		= "vpss",
+		.start          = 0x01c73400,
+		.end            = 0x01c73400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm644x_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm644x_vpss",
+	.num_resources		= ARRAY_SIZE(dm644x_vpss_resources),
+	.resource		= dm644x_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = 0x01c70400,
+		.end            = 0x01c70400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm644x_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -557,6 +660,13 @@ static struct davinci_id dm644x_ids[] = {
 		.cpu_id		= DAVINCI_CPU_ID_DM6446,
 		.name		= "dm6446",
 	},
+	{
+		.variant	= 0x1,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446a",
+	},
 };
 
 static void __iomem *dm644x_psc_bases[] = {
@@ -630,7 +740,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 71,
 	.gpio_irq		= IRQ_GPIOBNK0,
@@ -640,6 +749,13 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.sram_len		= SZ_16K,
 };
 
+void __init dm644x_init_asp(struct snd_platform_data *pdata)
+{
+	davinci_cfg_reg(DM644X_MCBSP);
+	dm644x_asp_device.dev.platform_data = pdata;
+	platform_device_register(&dm644x_asp_device);
+}
+
 void __init dm644x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm644x);
@@ -652,6 +768,9 @@ static int __init dm644x_init_devices(void)
 
 	platform_device_register(&dm644x_edma_device);
 	platform_device_register(&dm644x_emac_device);
+	platform_device_register(&dm644x_vpss_device);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 334f0711e0f5..0976049c7b3b 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -27,10 +27,20 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
 
+#define DAVINCI_VPIF_BASE       (0x01C12000)
+#define VDD3P3V_PWDN_OFFSET	(0x48)
+#define VSCLKDIS_OFFSET		(0x6C)
+
+#define VDD3P3V_VID_MASK	(BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
+					BIT_MASK(0))
+#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
+					BIT_MASK(8))
+
 /*
  * Device specific clocks
  */
@@ -162,6 +172,41 @@ static struct clk arm_clk = {
 	.flags = ALWAYS_ENABLED,
 };
 
+static struct clk edma_cc_clk = {
+	.name = "edma_cc",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPCC,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc0_clk = {
+	.name = "edma_tc0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC0,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc1_clk = {
+	.name = "edma_tc1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC1,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc2_clk = {
+	.name = "edma_tc2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC2,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc3_clk = {
+	.name = "edma_tc3",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC3,
+	.flags = ALWAYS_ENABLED,
+};
+
 static struct clk uart0_clk = {
 	.name = "uart0",
 	.parent = &aux_clkin,
@@ -192,6 +237,18 @@ static struct clk gpio_clk = {
 	.lpsc = DM646X_LPSC_GPIO,
 };
 
+static struct clk mcasp0_clk = {
+	.name = "mcasp0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP0,
+};
+
+static struct clk mcasp1_clk = {
+	.name = "mcasp1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP1,
+};
+
 static struct clk aemif_clk = {
 	.name = "aemif",
 	.parent = &pll1_sysclk3,
@@ -237,6 +294,13 @@ static struct clk timer2_clk = {
 	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
 };
 
+
+static struct clk ide_clk = {
+	.name = "ide",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_ATA,
+};
+
 static struct clk vpif0_clk = {
 	.name = "vpif0",
 	.parent = &ref_clk,
@@ -269,11 +333,18 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
 	CLK(NULL, "dsp", &dsp_clk),
 	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "edma_cc", &edma_cc_clk),
+	CLK(NULL, "edma_tc0", &edma_tc0_clk),
+	CLK(NULL, "edma_tc1", &edma_tc1_clk),
+	CLK(NULL, "edma_tc2", &edma_tc2_clk),
+	CLK(NULL, "edma_tc3", &edma_tc3_clk),
 	CLK(NULL, "uart0", &uart0_clk),
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
+	CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
+	CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
@@ -281,6 +352,7 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "timer0", &timer0_clk),
 	CLK(NULL, "timer1", &timer1_clk),
 	CLK("watchdog", NULL, &timer2_clk),
+	CLK("palm_bk3710", NULL, &ide_clk),
 	CLK(NULL, "vpif0", &vpif0_clk),
 	CLK(NULL, "vpif1", &vpif1_clk),
 	CLK(NULL, NULL, NULL),
@@ -344,7 +416,7 @@ static struct platform_device dm646x_emac_device = {
  */
 static const struct mux_config dm646x_pins[] = {
 #ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+MUX_CFG(DM646X, ATAEN,		0,   0,     5,	  1,	 true)
 
 MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
 
@@ -451,17 +523,43 @@ static const s8 dma_chan_dm646x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm646x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 6,	/* 0-1, 4-7 */
-	.n_slot		= 512,
-	.n_tc		= 4,
-	.noevent	= dma_chan_dm646x_no_event,
+/* Four Transfer Controllers on DM646x */
+static const s8
+dm646x_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm646x_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 4},
+	{1, 0},
+	{2, 5},
+	{3, 1},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm646x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 6,	/* 0-1, 4-7 */
+		.n_slot			= 512,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm646x_no_event,
+		.queue_tc_mapping	= dm646x_queue_tc_mapping,
+		.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -491,10 +589,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -503,12 +603,167 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm646x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm646x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm646x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
 
+static struct resource ide_resources[] = {
+	{
+		.start          = DM646X_ATA_REG_BASE,
+		.end            = DM646X_ATA_REG_BASE + 0x7ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = IRQ_DM646X_IDE,
+		.end            = IRQ_DM646X_IDE,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+	.name           = "palm_bk3710",
+	.id             = -1,
+	.resource       = ide_resources,
+	.num_resources  = ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dm646x_mcasp0_resources[] = {
+	{
+		.name	= "mcasp0",
+		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
+		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
+		.flags 	= IORESOURCE_MEM,
+	},
+	/* first TX, then RX */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource dm646x_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
+		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DIT mode, only TX event */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.end	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* DIT mode, dummy entry */
+	{
+		.start	= -1,
+		.end	= -1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm646x_mcasp0_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp0_resources),
+	.resource	= dm646x_mcasp0_resources,
+};
+
+static struct platform_device dm646x_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp1_resources),
+	.resource	= dm646x_mcasp1_resources,
+};
+
+static struct platform_device dm646x_dit_device = {
+	.name	= "spdif-dit",
+	.id	= -1,
+};
+
+static u64 vpif_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource vpif_resource[] = {
+	{
+		.start	= DAVINCI_VPIF_BASE,
+		.end	= DAVINCI_VPIF_BASE + 0x03ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device vpif_dev = {
+	.name		= "vpif",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_resource,
+	.num_resources	= ARRAY_SIZE(vpif_resource),
+};
+
+static struct resource vpif_display_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT2,
+		.end   = IRQ_DM646X_VP_VERTINT2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT3,
+		.end   = IRQ_DM646X_VP_VERTINT3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_display_dev = {
+	.name		= "vpif_display",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_display_resource,
+	.num_resources	= ARRAY_SIZE(vpif_display_resource),
+};
+
+static struct resource vpif_capture_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT0,
+		.end   = IRQ_DM646X_VP_VERTINT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT1,
+		.end   = IRQ_DM646X_VP_VERTINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_capture_dev = {
+	.name		= "vpif_capture",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_capture_resource,
+	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -609,7 +864,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 43, /* Only 33 usable */
 	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
@@ -619,6 +873,51 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm646x_init_ide()
+{
+	davinci_cfg_reg(DM646X_ATAEN);
+	platform_device_register(&ide_dev);
+}
+
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp0_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp0_device);
+}
+
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp1_device);
+	platform_device_register(&dm646x_dit_device);
+}
+
+void dm646x_setup_vpif(struct vpif_display_config *display_config,
+		       struct vpif_capture_config *capture_config)
+{
+	unsigned int value;
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+	value = __raw_readl(base + VSCLKDIS_OFFSET);
+	value &= ~VSCLKDIS_MASK;
+	__raw_writel(value, base + VSCLKDIS_OFFSET);
+
+	value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
+	value &= ~VDD3P3V_VID_MASK;
+	__raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
+
+	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
+
+	vpif_display_dev.dev.platform_data = display_config;
+	vpif_capture_dev.dev.platform_data = capture_config;
+	platform_device_register(&vpif_dev);
+	platform_device_register(&vpif_display_dev);
+	platform_device_register(&vpif_capture_dev);
+}
+
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 15e9eb158bb7..f2e57d272958 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -100,132 +100,158 @@
 #define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
 #define EDMA_PARM	0x4000	/* 128 param entries */
 
-#define DAVINCI_DMA_3PCC_BASE	0x01C00000
-
 #define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
 
+#define EDMA_DCHMAP	0x0100  /* 64 registers */
+#define CHMAP_EXIST	BIT(24)
+
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
-#define EDMA_MAX_EVQUE            2	/* FIXME too small */
+#define EDMA_MAX_CC               2
 
 
 /*****************************************************************************/
 
-static void __iomem *edmacc_regs_base;
+static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
 
-static inline unsigned int edma_read(int offset)
+static inline unsigned int edma_read(unsigned ctlr, int offset)
 {
-	return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
 }
 
-static inline void edma_write(int offset, int val)
+static inline void edma_write(unsigned ctlr, int offset, int val)
 {
-	__raw_writel(val, edmacc_regs_base + offset);
+	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
 }
-static inline void edma_modify(int offset, unsigned and, unsigned or)
+static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
+		unsigned or)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val &= and;
 	val |= or;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline void edma_and(int offset, unsigned and)
+static inline void edma_and(unsigned ctlr, int offset, unsigned and)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val &= and;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline void edma_or(int offset, unsigned or)
+static inline void edma_or(unsigned ctlr, int offset, unsigned or)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val |= or;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline unsigned int edma_read_array(int offset, int i)
+static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
 {
-	return edma_read(offset + (i << 2));
+	return edma_read(ctlr, offset + (i << 2));
 }
-static inline void edma_write_array(int offset, int i, unsigned val)
+static inline void edma_write_array(unsigned ctlr, int offset, int i,
+		unsigned val)
 {
-	edma_write(offset + (i << 2), val);
+	edma_write(ctlr, offset + (i << 2), val);
 }
-static inline void edma_modify_array(int offset, int i,
+static inline void edma_modify_array(unsigned ctlr, int offset, int i,
 		unsigned and, unsigned or)
 {
-	edma_modify(offset + (i << 2), and, or);
+	edma_modify(ctlr, offset + (i << 2), and, or);
 }
-static inline void edma_or_array(int offset, int i, unsigned or)
+static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
 {
-	edma_or(offset + (i << 2), or);
+	edma_or(ctlr, offset + (i << 2), or);
 }
-static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
+		unsigned or)
 {
-	edma_or(offset + ((i*2 + j) << 2), or);
+	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
 }
-static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
+		unsigned val)
 {
-	edma_write(offset + ((i*2 + j) << 2), val);
+	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
 }
-static inline unsigned int edma_shadow0_read(int offset)
+static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
 {
-	return edma_read(EDMA_SHADOW0 + offset);
+	return edma_read(ctlr, EDMA_SHADOW0 + offset);
 }
-static inline unsigned int edma_shadow0_read_array(int offset, int i)
+static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
+		int i)
 {
-	return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
 }
-static inline void edma_shadow0_write(int offset, unsigned val)
+static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
 {
-	edma_write(EDMA_SHADOW0 + offset, val);
+	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
 }
-static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
+		unsigned val)
 {
-	edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
 }
-static inline unsigned int edma_parm_read(int offset, int param_no)
+static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
+		int param_no)
 {
-	return edma_read(EDMA_PARM + offset + (param_no << 5));
+	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
 }
-static inline void edma_parm_write(int offset, int param_no, unsigned val)
+static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
+		unsigned val)
 {
-	edma_write(EDMA_PARM + offset + (param_no << 5), val);
+	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
 }
-static inline void edma_parm_modify(int offset, int param_no,
+static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
 		unsigned and, unsigned or)
 {
-	edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
 }
-static inline void edma_parm_and(int offset, int param_no, unsigned and)
+static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
+		unsigned and)
 {
-	edma_and(EDMA_PARM + offset + (param_no << 5), and);
+	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
 }
-static inline void edma_parm_or(int offset, int param_no, unsigned or)
+static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
+		unsigned or)
 {
-	edma_or(EDMA_PARM + offset + (param_no << 5), or);
+	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
 }
 
 /*****************************************************************************/
 
 /* actual number of DMA channels and slots on this silicon */
-static unsigned num_channels;
-static unsigned num_slots;
+struct edma {
+	/* how many dma resources of each type */
+	unsigned	num_channels;
+	unsigned	num_region;
+	unsigned	num_slots;
+	unsigned	num_tc;
+	unsigned	num_cc;
+	enum dma_event_q 	default_queue;
+
+	/* list of channels with no even trigger; terminated by "-1" */
+	const s8	*noevent;
+
+	/* The edma_inuse bit for each PaRAM slot is clear unless the
+	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+	 */
+	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
 
-static struct dma_interrupt_data {
-	void (*callback)(unsigned channel, unsigned short ch_status,
-			 void *data);
-	void *data;
-} intr_data[EDMA_MAX_DMACH];
+	/* The edma_noevent bit for each channel is clear unless
+	 * it doesn't trigger DMA events on this platform.  It uses a
+	 * bit of SOC-specific initialization code.
+	 */
+	DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
 
-/* The edma_inuse bit for each PaRAM slot is clear unless the
- * channel is in use ... by ARM or DSP, for QDMA, or whatever.
- */
-static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+	unsigned	irq_res_start;
+	unsigned	irq_res_end;
 
-/* The edma_noevent bit for each channel is clear unless
- * it doesn't trigger DMA events on this platform.  It uses a
- * bit of SOC-specific initialization code.
- */
-static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+	struct dma_interrupt_data {
+		void (*callback)(unsigned channel, unsigned short ch_status,
+				void *data);
+		void *data;
+	} intr_data[EDMA_MAX_DMACH];
+};
+
+static struct edma *edma_info[EDMA_MAX_CC];
 
 /* dummy param set used to (re)initialize parameter RAM slots */
 static const struct edmacc_param dummy_paramset = {
@@ -233,47 +259,52 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
-static const int __initconst
-queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
-/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1}
-};
-
-static const int __initconst
-queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1}
-};
-
 /*****************************************************************************/
 
-static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
+		enum dma_event_q queue_no)
 {
 	int bit = (ch_no & 0x7) * 4;
 
 	/* default to low priority queue */
 	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = EVENTQ_1;
+		queue_no = edma_info[ctlr]->default_queue;
 
 	queue_no &= 7;
-	edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
 			~(0x7 << bit), queue_no << bit);
 }
 
-static void __init map_queue_tc(int queue_no, int tc_no)
+static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
 {
 	int bit = queue_no * 4;
-	edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
 }
 
-static void __init assign_priority_to_queue(int queue_no, int priority)
+static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
+		int priority)
 {
 	int bit = queue_no * 4;
-	edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
+			((priority & 0x7) << bit));
+}
+
+/**
+ * map_dmach_param - Maps channel number to param entry number
+ *
+ * This maps the dma channel number to param entry numberter. In
+ * other words using the DMA channel mapping registers a param entry
+ * can be mapped to any channel
+ *
+ * Callers are responsible for ensuring the channel mapping logic is
+ * included in that particular EDMA variant (Eg : dm646x)
+ *
+ */
+static void __init map_dmach_param(unsigned ctlr)
+{
+	int i;
+	for (i = 0; i < EDMA_MAX_DMACH; i++)
+		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
 }
 
 static inline void
@@ -281,22 +312,39 @@ setup_dma_interrupt(unsigned lch,
 	void (*callback)(unsigned channel, u16 ch_status, void *data),
 	void *data)
 {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(lch);
+	lch = EDMA_CHAN_SLOT(lch);
+
 	if (!callback) {
-		edma_shadow0_write_array(SH_IECR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
 				(1 << (lch & 0x1f)));
 	}
 
-	intr_data[lch].callback = callback;
-	intr_data[lch].data = data;
+	edma_info[ctlr]->intr_data[lch].callback = callback;
+	edma_info[ctlr]->intr_data[lch].data = data;
 
 	if (callback) {
-		edma_shadow0_write_array(SH_ICR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
 				(1 << (lch & 0x1f)));
-		edma_shadow0_write_array(SH_IESR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
 				(1 << (lch & 0x1f)));
 	}
 }
 
+static int irq2ctlr(int irq)
+{
+	if (irq >= edma_info[0]->irq_res_start &&
+		irq <= edma_info[0]->irq_res_end)
+		return 0;
+	else if (irq >= edma_info[1]->irq_res_start &&
+		irq <= edma_info[1]->irq_res_end)
+		return 1;
+
+	return -1;
+}
+
 /******************************************************************************
  *
  * DMA interrupt handler
@@ -305,32 +353,39 @@ setup_dma_interrupt(unsigned lch,
 static irqreturn_t dma_irq_handler(int irq, void *data)
 {
 	int i;
+	unsigned ctlr;
 	unsigned int cnt = 0;
 
+	ctlr = irq2ctlr(irq);
+
 	dev_dbg(data, "dma_irq_handler\n");
 
-	if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
-	    && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0)
+	    && (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j;
-		if (edma_shadow0_read_array(SH_IPR, 0))
+		if (edma_shadow0_read_array(ctlr, SH_IPR, 0))
 			j = 0;
-		else if (edma_shadow0_read_array(SH_IPR, 1))
+		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1))
 			j = 1;
 		else
 			break;
 		dev_dbg(data, "IPR%d %08x\n", j,
-				edma_shadow0_read_array(SH_IPR, j));
+				edma_shadow0_read_array(ctlr, SH_IPR, j));
 		for (i = 0; i < 32; i++) {
 			int k = (j << 5) + i;
-			if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+			if (edma_shadow0_read_array(ctlr, SH_IPR, j) &
+							(1 << i)) {
 				/* Clear the corresponding IPR bits */
-				edma_shadow0_write_array(SH_ICR, j, (1 << i));
-				if (intr_data[k].callback) {
-					intr_data[k].callback(k, DMA_COMPLETE,
-						intr_data[k].data);
+				edma_shadow0_write_array(ctlr, SH_ICR, j,
+							(1 << i));
+				if (edma_info[ctlr]->intr_data[k].callback) {
+					edma_info[ctlr]->intr_data[k].callback(
+						k, DMA_COMPLETE,
+						edma_info[ctlr]->intr_data[k].
+						data);
 				}
 			}
 		}
@@ -338,7 +393,7 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 		if (cnt > 10)
 			break;
 	}
-	edma_shadow0_write(SH_IEVAL, 1);
+	edma_shadow0_write(ctlr, SH_IEVAL, 1);
 	return IRQ_HANDLED;
 }
 
@@ -350,78 +405,87 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 static irqreturn_t dma_ccerr_handler(int irq, void *data)
 {
 	int i;
+	unsigned ctlr;
 	unsigned int cnt = 0;
 
+	ctlr = irq2ctlr(irq);
+
 	dev_dbg(data, "dma_ccerr_handler\n");
 
-	if ((edma_read_array(EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(EDMA_EMR, 1) == 0) &&
-	    (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
+	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
+	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
+	    (edma_read(ctlr, EDMA_CCERR) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j = -1;
-		if (edma_read_array(EDMA_EMR, 0))
+		if (edma_read_array(ctlr, EDMA_EMR, 0))
 			j = 0;
-		else if (edma_read_array(EDMA_EMR, 1))
+		else if (edma_read_array(ctlr, EDMA_EMR, 1))
 			j = 1;
 		if (j >= 0) {
 			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(EDMA_EMR, j));
+					edma_read_array(ctlr, EDMA_EMR, j));
 			for (i = 0; i < 32; i++) {
 				int k = (j << 5) + i;
-				if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+				if (edma_read_array(ctlr, EDMA_EMR, j) &
+							(1 << i)) {
 					/* Clear the corresponding EMR bits */
-					edma_write_array(EDMA_EMCR, j, 1 << i);
+					edma_write_array(ctlr, EDMA_EMCR, j,
+							1 << i);
 					/* Clear any SER */
-					edma_shadow0_write_array(SH_SECR, j,
-							(1 << i));
-					if (intr_data[k].callback) {
-						intr_data[k].callback(k,
-								DMA_CC_ERROR,
-								intr_data
-								[k].data);
+					edma_shadow0_write_array(ctlr, SH_SECR,
+								j, (1 << i));
+					if (edma_info[ctlr]->intr_data[k].
+								callback) {
+						edma_info[ctlr]->intr_data[k].
+						callback(k,
+						DMA_CC_ERROR,
+						edma_info[ctlr]->intr_data
+						[k].data);
 					}
 				}
 			}
-		} else if (edma_read(EDMA_QEMR)) {
+		} else if (edma_read(ctlr, EDMA_QEMR)) {
 			dev_dbg(data, "QEMR %02x\n",
-				edma_read(EDMA_QEMR));
+				edma_read(ctlr, EDMA_QEMR));
 			for (i = 0; i < 8; i++) {
-				if (edma_read(EDMA_QEMR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_QEMR) & (1 << i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(EDMA_QEMCR, 1 << i);
-					edma_shadow0_write(SH_QSECR, (1 << i));
+					edma_write(ctlr, EDMA_QEMCR, 1 << i);
+					edma_shadow0_write(ctlr, SH_QSECR,
+								(1 << i));
 
 					/* NOTE:  not reported!! */
 				}
 			}
-		} else if (edma_read(EDMA_CCERR)) {
+		} else if (edma_read(ctlr, EDMA_CCERR)) {
 			dev_dbg(data, "CCERR %08x\n",
-				edma_read(EDMA_CCERR));
+				edma_read(ctlr, EDMA_CCERR));
 			/* FIXME:  CCERR.BIT(16) ignored!  much better
 			 * to just write CCERRCLR with CCERR value...
 			 */
 			for (i = 0; i < 8; i++) {
-				if (edma_read(EDMA_CCERR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_CCERR) & (1 << i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(EDMA_CCERRCLR, 1 << i);
+					edma_write(ctlr, EDMA_CCERRCLR, 1 << i);
 
 					/* NOTE:  not reported!! */
 				}
 			}
 		}
-		if ((edma_read_array(EDMA_EMR, 0) == 0)
-		    && (edma_read_array(EDMA_EMR, 1) == 0)
-		    && (edma_read(EDMA_QEMR) == 0)
-		    && (edma_read(EDMA_CCERR) == 0)) {
+		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0)
+		    && (edma_read_array(ctlr, EDMA_EMR, 1) == 0)
+		    && (edma_read(ctlr, EDMA_QEMR) == 0)
+		    && (edma_read(ctlr, EDMA_CCERR) == 0)) {
 			break;
 		}
 		cnt++;
 		if (cnt > 10)
 			break;
 	}
-	edma_write(EDMA_EEVAL, 1);
+	edma_write(ctlr, EDMA_EEVAL, 1);
 	return IRQ_HANDLED;
 }
 
@@ -445,6 +509,45 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int reserve_contiguous_params(int ctlr, unsigned int id,
+				     unsigned int num_params,
+				     unsigned int start_param)
+{
+	int i, j;
+	unsigned int count = num_params;
+
+	for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
+		j = EDMA_CHAN_SLOT(i);
+		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
+			count--;
+			if (count == 0)
+				break;
+		else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
+			break;
+		else
+			count = num_params;
+	}
+
+	/*
+	 * We have to clear any bits that we set
+	 * if we run out parameter RAMs, i.e we do find a set
+	 * of contiguous parameter RAMs but do not find the exact number
+	 * requested as we may reach the total number of parameter RAMs
+	 */
+	if (count) {
+		for (j = i - num_params + count + 1; j <= i ; ++j)
+			clear_bit(j, edma_info[ctlr]->edma_inuse);
+
+		return -EBUSY;
+	}
+
+	for (j = i - num_params + 1; j <= i; ++j)
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
+			&dummy_paramset, PARM_SIZE);
+
+	return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
+}
+
 /*-----------------------------------------------------------------------*/
 
 /* Resource alloc/free:  dma channels, parameter RAM slots */
@@ -484,35 +587,53 @@ int edma_alloc_channel(int channel,
 		void *data,
 		enum dma_event_q eventq_no)
 {
+	unsigned i, done, ctlr = 0;
+
+	if (channel >= 0) {
+		ctlr = EDMA_CTLR(channel);
+		channel = EDMA_CHAN_SLOT(channel);
+	}
+
 	if (channel < 0) {
-		channel = 0;
-		for (;;) {
-			channel = find_next_bit(edma_noevent,
-					num_channels, channel);
-			if (channel == num_channels)
-				return -ENOMEM;
-			if (!test_and_set_bit(channel, edma_inuse))
+		for (i = 0; i < EDMA_MAX_CC; i++) {
+			channel = 0;
+			for (;;) {
+				channel = find_next_bit(edma_info[i]->
+						edma_noevent,
+						edma_info[i]->num_channels,
+						channel);
+				if (channel == edma_info[i]->num_channels)
+					return -ENOMEM;
+				if (!test_and_set_bit(channel,
+						edma_info[i]->edma_inuse)) {
+					done = 1;
+					ctlr = i;
+					break;
+				}
+				channel++;
+			}
+			if (done)
 				break;
-			channel++;
 		}
-	} else if (channel >= num_channels) {
+	} else if (channel >= edma_info[ctlr]->num_channels) {
 		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_inuse)) {
+	} else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
 	/* ensure access through shadow region 0 */
-	edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
 
 	/* ensure no events are pending */
-	edma_stop(channel);
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
 
 	if (callback)
-		setup_dma_interrupt(channel, callback, data);
+		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
+					callback, data);
 
-	map_dmach_queue(channel, eventq_no);
+	map_dmach_queue(ctlr, channel, eventq_no);
 
 	return channel;
 }
@@ -532,15 +653,20 @@ EXPORT_SYMBOL(edma_alloc_channel);
  */
 void edma_free_channel(unsigned channel)
 {
-	if (channel >= num_channels)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel >= edma_info[ctlr]->num_channels)
 		return;
 
 	setup_dma_interrupt(channel, NULL, NULL);
 	/* REVISIT should probably take out of shadow region 0 */
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_inuse);
+	clear_bit(channel, edma_info[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_channel);
 
@@ -558,28 +684,33 @@ EXPORT_SYMBOL(edma_free_channel);
  *
  * Returns the number of the slot, else negative errno.
  */
-int edma_alloc_slot(int slot)
+int edma_alloc_slot(unsigned ctlr, int slot)
 {
+	if (slot >= 0)
+		slot = EDMA_CHAN_SLOT(slot);
+
 	if (slot < 0) {
-		slot = num_channels;
+		slot = edma_info[ctlr]->num_channels;
 		for (;;) {
-			slot = find_next_zero_bit(edma_inuse,
-					num_slots, slot);
-			if (slot == num_slots)
+			slot = find_next_zero_bit(edma_info[ctlr]->edma_inuse,
+					edma_info[ctlr]->num_slots, slot);
+			if (slot == edma_info[ctlr]->num_slots)
 				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_inuse))
+			if (!test_and_set_bit(slot,
+						edma_info[ctlr]->edma_inuse))
 				break;
 		}
-	} else if (slot < num_channels || slot >= num_slots) {
+	} else if (slot < edma_info[ctlr]->num_channels ||
+			slot >= edma_info[ctlr]->num_slots) {
 		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_inuse)) {
+	} else if (test_and_set_bit(slot, edma_info[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
 
-	return slot;
+	return EDMA_CTLR_CHAN(ctlr, slot);
 }
 EXPORT_SYMBOL(edma_alloc_slot);
 
@@ -593,15 +724,119 @@ EXPORT_SYMBOL(edma_alloc_slot);
  */
 void edma_free_slot(unsigned slot)
 {
-	if (slot < num_channels || slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots)
 		return;
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_inuse);
+	clear_bit(slot, edma_info[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_slot);
 
+
+/**
+ * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
+ * The API will return the starting point of a set of
+ * contiguous PARAM's that have been requested
+ *
+ * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
+ * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ * @count: number of contiguous Paramter RAM's
+ * @param  - the start value of Parameter RAM that should be passed if id
+ * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ *
+ * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
+ * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
+ * and 32 in the case of Primus
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
+ * set of contiguous parameter RAMs from the "param" that is passed as an
+ * argument to the API.
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
+ * starts looking for a set of contiguous parameter RAMs from the "param"
+ * that is passed as an argument to the API. On failure the API will try to
+ * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
+ */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
+{
+	/*
+	 * The start slot requested should be greater than
+	 * the number of channels and lesser than the total number
+	 * of slots
+	 */
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots)
+		return -EINVAL;
+
+	/*
+	 * The number of parameter RAMs requested cannot be less than 1
+	 * and cannot be more than the number of slots minus the number of
+	 * channels
+	 */
+	if (count < 1 || count >
+		(edma_info[ctlr]->num_slots - edma_info[ctlr]->num_channels))
+		return -EINVAL;
+
+	switch (id) {
+	case EDMA_CONT_PARAMS_ANY:
+		return reserve_contiguous_params(ctlr, id, count,
+						 edma_info[ctlr]->num_channels);
+	case EDMA_CONT_PARAMS_FIXED_EXACT:
+	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
+		return reserve_contiguous_params(ctlr, id, count, slot);
+	default:
+		return -EINVAL;
+	}
+
+}
+EXPORT_SYMBOL(edma_alloc_cont_slots);
+
+/**
+ * edma_free_cont_slots - deallocate DMA parameter RAMs
+ * @slot: first parameter RAM of a set of parameter RAMs to be freed
+ * @count: the number of contiguous parameter RAMs to be freed
+ *
+ * This deallocates the parameter RAM slots allocated by
+ * edma_alloc_cont_slots.
+ * Callers/applications need to keep track of sets of contiguous
+ * parameter RAMs that have been allocated using the edma_alloc_cont_slots
+ * API.
+ * Callers are responsible for ensuring the slots are inactive, and will
+ * not be activated.
+ */
+int edma_free_cont_slots(unsigned slot, int count)
+{
+	unsigned ctlr;
+	int i;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots ||
+		count < 1)
+		return -EINVAL;
+
+	for (i = slot; i < slot + count; ++i) {
+		ctlr = EDMA_CTLR(i);
+		slot = EDMA_CHAN_SLOT(i);
+
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+			&dummy_paramset, PARM_SIZE);
+		clear_bit(slot, edma_info[ctlr]->edma_inuse);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(edma_free_cont_slots);
+
 /*-----------------------------------------------------------------------*/
 
 /* Parameter RAM operations (i) -- read/write partial slots */
@@ -620,8 +855,13 @@ EXPORT_SYMBOL(edma_free_slot);
 void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width width)
 {
-	if (slot < num_slots) {
-		unsigned int i = edma_parm_read(PARM_OPT, slot);
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
 			/* set SAM and program FWID */
@@ -630,11 +870,11 @@ void edma_set_src(unsigned slot, dma_addr_t src_port,
 			/* clear SAM */
 			i &= ~SAM;
 		}
-		edma_parm_write(PARM_OPT, slot, i);
+		edma_parm_write(ctlr, PARM_OPT, slot, i);
 
 		/* set the source port address
 		   in source register of param structure */
-		edma_parm_write(PARM_SRC, slot, src_port);
+		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
 	}
 }
 EXPORT_SYMBOL(edma_set_src);
@@ -653,8 +893,13 @@ EXPORT_SYMBOL(edma_set_src);
 void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 				 enum address_mode mode, enum fifo_width width)
 {
-	if (slot < num_slots) {
-		unsigned int i = edma_parm_read(PARM_OPT, slot);
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
 			/* set DAM and program FWID */
@@ -663,10 +908,10 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 			/* clear DAM */
 			i &= ~DAM;
 		}
-		edma_parm_write(PARM_OPT, slot, i);
+		edma_parm_write(ctlr, PARM_OPT, slot, i);
 		/* set the destination port address
 		   in dest register of param structure */
-		edma_parm_write(PARM_DST, slot, dest_port);
+		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
 	}
 }
 EXPORT_SYMBOL(edma_set_dest);
@@ -683,8 +928,12 @@ EXPORT_SYMBOL(edma_set_dest);
 void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
 {
 	struct edmacc_param temp;
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
 
-	edma_read_slot(slot, &temp);
+	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
 	if (src != NULL)
 		*src = temp.src;
 	if (dst != NULL)
@@ -704,10 +953,15 @@ EXPORT_SYMBOL(edma_get_position);
  */
 void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0xffff0000, src_bidx);
-		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
 				0xffff0000, src_cidx);
 	}
 }
@@ -725,10 +979,15 @@ EXPORT_SYMBOL(edma_set_src_index);
  */
 void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
 				0x0000ffff, dest_cidx << 16);
 	}
 }
@@ -767,16 +1026,21 @@ void edma_set_transfer_params(unsigned slot,
 		u16 acnt, u16 bcnt, u16 ccnt,
 		u16 bcnt_rld, enum sync_dimension sync_mode)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
 				0x0000ffff, bcnt_rld << 16);
 		if (sync_mode == ASYNC)
-			edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
 		else
-			edma_parm_or(PARM_OPT, slot, SYNCDIM);
+			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
 		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(PARM_CCNT, slot, ccnt);
+		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
 	}
 }
 EXPORT_SYMBOL(edma_set_transfer_params);
@@ -790,11 +1054,19 @@ EXPORT_SYMBOL(edma_set_transfer_params);
  */
 void edma_link(unsigned from, unsigned to)
 {
-	if (from >= num_slots)
+	unsigned ctlr_from, ctlr_to;
+
+	ctlr_from = EDMA_CTLR(from);
+	from = EDMA_CHAN_SLOT(from);
+	ctlr_to = EDMA_CTLR(to);
+	to = EDMA_CHAN_SLOT(to);
+
+	if (from >= edma_info[ctlr_from]->num_slots)
 		return;
-	if (to >= num_slots)
+	if (to >= edma_info[ctlr_to]->num_slots)
 		return;
-	edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
+				PARM_OFFSET(to));
 }
 EXPORT_SYMBOL(edma_link);
 
@@ -807,9 +1079,14 @@ EXPORT_SYMBOL(edma_link);
  */
 void edma_unlink(unsigned from)
 {
-	if (from >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(from);
+	from = EDMA_CHAN_SLOT(from);
+
+	if (from >= edma_info[ctlr]->num_slots)
 		return;
-	edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
 }
 EXPORT_SYMBOL(edma_unlink);
 
@@ -829,9 +1106,15 @@ EXPORT_SYMBOL(edma_unlink);
  */
 void edma_write_slot(unsigned slot, const struct edmacc_param *param)
 {
-	if (slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot >= edma_info[ctlr]->num_slots)
 		return;
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
+			PARM_SIZE);
 }
 EXPORT_SYMBOL(edma_write_slot);
 
@@ -845,9 +1128,15 @@ EXPORT_SYMBOL(edma_write_slot);
  */
 void edma_read_slot(unsigned slot, struct edmacc_param *param)
 {
-	if (slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot >= edma_info[ctlr]->num_slots)
 		return;
-	memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+			PARM_SIZE);
 }
 EXPORT_SYMBOL(edma_read_slot);
 
@@ -864,10 +1153,15 @@ EXPORT_SYMBOL(edma_read_slot);
  */
 void edma_pause(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
 	}
 }
 EXPORT_SYMBOL(edma_pause);
@@ -880,10 +1174,15 @@ EXPORT_SYMBOL(edma_pause);
  */
 void edma_resume(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
 	}
 }
 EXPORT_SYMBOL(edma_resume);
@@ -901,28 +1200,33 @@ EXPORT_SYMBOL(edma_resume);
  */
 int edma_start(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = channel >> 5;
 		unsigned int mask = (1 << (channel & 0x1f));
 
 		/* EDMA channels without event association */
-		if (test_bit(channel, edma_noevent)) {
+		if (test_bit(channel, edma_info[ctlr]->edma_noevent)) {
 			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(SH_ESR, j));
-			edma_shadow0_write_array(SH_ESR, j, mask);
+				edma_shadow0_read_array(ctlr, SH_ESR, j));
+			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
 			return 0;
 		}
 
 		/* EDMA channel with event association */
 		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(SH_ER, j));
+			edma_shadow0_read_array(ctlr, SH_ER, j));
 		/* Clear any pending error */
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_shadow0_write_array(SH_EESR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
 		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(SH_EER, j));
+			edma_shadow0_read_array(ctlr, SH_EER, j));
 		return 0;
 	}
 
@@ -941,17 +1245,22 @@ EXPORT_SYMBOL(edma_start);
  */
 void edma_stop(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = channel >> 5;
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EECR, j, mask);
-		edma_shadow0_write_array(SH_ECR, j, mask);
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 
 		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(SH_EER, j));
+				edma_shadow0_read_array(ctlr, SH_EER, j));
 
 		/* REVISIT:  consider guarding against inappropriate event
 		 * chaining by overwriting with dummy_paramset.
@@ -975,18 +1284,23 @@ EXPORT_SYMBOL(edma_stop);
 
 void edma_clean_channel(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = (channel >> 5);
 		unsigned int mask = 1 << (channel & 0x1f);
 
 		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(EDMA_EMR, j));
-		edma_shadow0_write_array(SH_ECR, j, mask);
+				edma_read_array(ctlr, EDMA_EMR, j));
+		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
 		/* Clear the corresponding EMR bits */
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_write(ctlr, EDMA_CCERRCLR, (1 << 16) | 0x3);
 	}
 }
 EXPORT_SYMBOL(edma_clean_channel);
@@ -998,12 +1312,17 @@ EXPORT_SYMBOL(edma_clean_channel);
  */
 void edma_clear_event(unsigned channel)
 {
-	if (channel >= num_channels)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel >= edma_info[ctlr]->num_channels)
 		return;
 	if (channel < 32)
-		edma_write(EDMA_ECR, 1 << channel);
+		edma_write(ctlr, EDMA_ECR, 1 << channel);
 	else
-		edma_write(EDMA_ECRH, 1 << (channel - 32));
+		edma_write(ctlr, EDMA_ECRH, 1 << (channel - 32));
 }
 EXPORT_SYMBOL(edma_clear_event);
 
@@ -1012,62 +1331,133 @@ EXPORT_SYMBOL(edma_clear_event);
 static int __init edma_probe(struct platform_device *pdev)
 {
 	struct edma_soc_info	*info = pdev->dev.platform_data;
-	int			i;
-	int			status;
+	const s8		(*queue_priority_mapping)[2];
+	const s8		(*queue_tc_mapping)[2];
+	int			i, j, found = 0;
+	int			status = -1;
 	const s8		*noevent;
-	int			irq = 0, err_irq = 0;
-	struct resource		*r;
-	resource_size_t		len;
+	int			irq[EDMA_MAX_CC] = {0, 0};
+	int			err_irq[EDMA_MAX_CC] = {0, 0};
+	struct resource		*r[EDMA_MAX_CC] = {NULL};
+	resource_size_t		len[EDMA_MAX_CC];
+	char			res_name[10];
+	char			irq_name[10];
 
 	if (!info)
 		return -ENODEV;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
-	if (!r)
-		return -ENODEV;
+	for (j = 0; j < EDMA_MAX_CC; j++) {
+		sprintf(res_name, "edma_cc%d", j);
+		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						res_name);
+		if (!r[j]) {
+			if (found)
+				break;
+			else
+				return -ENODEV;
+		} else
+			found = 1;
+
+		len[j] = resource_size(r[j]);
+
+		r[j] = request_mem_region(r[j]->start, len[j],
+			dev_name(&pdev->dev));
+		if (!r[j]) {
+			status = -EBUSY;
+			goto fail1;
+		}
 
-	len = r->end - r->start + 1;
+		edmacc_regs_base[j] = ioremap(r[j]->start, len[j]);
+		if (!edmacc_regs_base[j]) {
+			status = -EBUSY;
+			goto fail1;
+		}
 
-	r = request_mem_region(r->start, len, r->name);
-	if (!r)
-		return -EBUSY;
+		edma_info[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		if (!edma_info[j]) {
+			status = -ENOMEM;
+			goto fail1;
+		}
+		memset(edma_info[j], 0, sizeof(struct edma));
+
+		edma_info[j]->num_channels = min_t(unsigned, info[j].n_channel,
+							EDMA_MAX_DMACH);
+		edma_info[j]->num_slots = min_t(unsigned, info[j].n_slot,
+							EDMA_MAX_PARAMENTRY);
+		edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc,
+							EDMA_MAX_CC);
+
+		edma_info[j]->default_queue = info[j].default_queue;
+		if (!edma_info[j]->default_queue)
+			edma_info[j]->default_queue = EVENTQ_1;
+
+		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
+			edmacc_regs_base[j]);
+
+		for (i = 0; i < edma_info[j]->num_slots; i++)
+			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
+					&dummy_paramset, PARM_SIZE);
+
+		noevent = info[j].noevent;
+		if (noevent) {
+			while (*noevent != -1)
+				set_bit(*noevent++, edma_info[j]->edma_noevent);
+		}
 
-	edmacc_regs_base = ioremap(r->start, len);
-	if (!edmacc_regs_base) {
-		status = -EBUSY;
-		goto fail1;
-	}
+		sprintf(irq_name, "edma%d", j);
+		irq[j] = platform_get_irq_byname(pdev, irq_name);
+		edma_info[j]->irq_res_start = irq[j];
+		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
+					&pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				irq[j], status);
+			goto fail;
+		}
 
-	num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
-	num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+		sprintf(irq_name, "edma%d_err", j);
+		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		edma_info[j]->irq_res_end = err_irq[j];
+		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
+					"edma_error", &pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				err_irq[j], status);
+			goto fail;
+		}
 
-	dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+		/* Everything lives on transfer controller 1 until otherwise
+		 * specified. This way, long transfers on the low priority queue
+		 * started by the codec engine will not cause audio defects.
+		 */
+		for (i = 0; i < edma_info[j]->num_channels; i++)
+			map_dmach_queue(j, i, EVENTQ_1);
 
-	for (i = 0; i < num_slots; i++)
-		memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
-				&dummy_paramset, PARM_SIZE);
+		queue_tc_mapping = info[j].queue_tc_mapping;
+		queue_priority_mapping = info[j].queue_priority_mapping;
 
-	noevent = info->noevent;
-	if (noevent) {
-		while (*noevent != -1)
-			set_bit(*noevent++, edma_noevent);
-	}
+		/* Event queue to TC mapping */
+		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+			map_queue_tc(j, queue_tc_mapping[i][0],
+					queue_tc_mapping[i][1]);
 
-	irq = platform_get_irq(pdev, 0);
-	status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
-	if (status < 0) {
-		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-			irq, status);
-		goto fail;
-	}
+		/* Event queue priority mapping */
+		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+			assign_priority_to_queue(j,
+						queue_priority_mapping[i][0],
+						queue_priority_mapping[i][1]);
+
+		/* Map the channel to param entry if channel mapping logic
+		 * exist
+		 */
+		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
+			map_dmach_param(j);
 
-	err_irq = platform_get_irq(pdev, 1);
-	status = request_irq(err_irq, dma_ccerr_handler, 0,
-				"edma_error", &pdev->dev);
-	if (status < 0) {
-		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-			err_irq, status);
-		goto fail;
+		for (i = 0; i < info[j].n_region; i++) {
+			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
+			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
+			edma_write_array(j, EDMA_QRAE, i, 0x0);
+		}
 	}
 
 	if (tc_errs_handled) {
@@ -1087,38 +1477,23 @@ static int __init edma_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Everything lives on transfer controller 1 until otherwise specified.
-	 * This way, long transfers on the low priority queue
-	 * started by the codec engine will not cause audio defects.
-	 */
-	for (i = 0; i < num_channels; i++)
-		map_dmach_queue(i, EVENTQ_1);
-
-	/* Event queue to TC mapping */
-	for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-		map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
-
-	/* Event queue priority mapping */
-	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-		assign_priority_to_queue(queue_priority_mapping[i][0],
-					 queue_priority_mapping[i][1]);
-
-	for (i = 0; i < info->n_region; i++) {
-		edma_write_array2(EDMA_DRAE, i, 0, 0x0);
-		edma_write_array2(EDMA_DRAE, i, 1, 0x0);
-		edma_write_array(EDMA_QRAE, i, 0x0);
-	}
-
 	return 0;
 
 fail:
-	if (err_irq)
-		free_irq(err_irq, NULL);
-	if (irq)
-		free_irq(irq, NULL);
-	iounmap(edmacc_regs_base);
+	for (i = 0; i < EDMA_MAX_CC; i++) {
+		if (err_irq[i])
+			free_irq(err_irq[i], &pdev->dev);
+		if (irq[i])
+			free_irq(irq[i], &pdev->dev);
+	}
 fail1:
-	release_mem_region(r->start, len);
+	for (i = 0; i < EDMA_MAX_CC; i++) {
+		if (r[i])
+			release_mem_region(r[i]->start, len[i]);
+		if (edmacc_regs_base[i])
+			iounmap(edmacc_regs_base[i]);
+		kfree(edma_info[i]);
+	}
 	return status;
 }
 
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1b6532159c58..f6ea9db11f41 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -34,6 +34,7 @@ static DEFINE_SPINLOCK(gpio_lock);
 struct davinci_gpio {
 	struct gpio_chip	chip;
 	struct gpio_controller	*__iomem regs;
+	int			irq_base;
 };
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
@@ -161,8 +162,7 @@ pure_initcall(davinci_gpio_setup);
  * used as output pins ... which is convenient for testing.
  *
  * NOTE:  The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
- * on triggering (e.g. no edge options).  We don't try to use those.
+ * to their GPIOBNK0 irq, with a bit less overhead.
  *
  * All those INTC hookups (direct, plus several IRQ banks) can also
  * serve as EDMA event triggers.
@@ -171,7 +171,7 @@ pure_initcall(davinci_gpio_setup);
 static void gpio_irq_disable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	__raw_writel(mask, &g->clr_falling);
 	__raw_writel(mask, &g->clr_rising);
@@ -180,7 +180,7 @@ static void gpio_irq_disable(unsigned irq)
 static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 	unsigned status = irq_desc[irq].status;
 
 	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
@@ -196,7 +196,7 @@ static void gpio_irq_enable(unsigned irq)
 static int gpio_irq_type(unsigned irq, unsigned trigger)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
@@ -260,6 +260,45 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	/* now it may re-trigger */
 }
 
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+
+	if (d->irq_base >= 0)
+		return d->irq_base + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+	 */
+	if (offset < soc_info->gpio_unbanked)
+		return soc_info->gpio_irq + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = (u32) get_irq_data(irq);
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+
+	return 0;
+}
+
 /*
  * NOTE:  for suspend/resume, probably best to make a platform_device with
  * suspend_late/resume_resume calls hooking into results of the set_wake()
@@ -275,6 +314,7 @@ static int __init davinci_gpio_irq_setup(void)
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct gpio_controller	*__iomem g;
 
 	ngpio = soc_info->gpio_num;
 
@@ -292,12 +332,63 @@ static int __init davinci_gpio_irq_setup(void)
 	}
 	clk_enable(clk);
 
+	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
+	 * IRQs, while the others use banked IRQs, would need some setup
+	 * tweaks to recognize hardware which can do that.
+	 */
+	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+		chips[bank].chip.to_irq = gpio_to_irq_banked;
+		chips[bank].irq_base = soc_info->gpio_unbanked
+			? -EINVAL
+			: (soc_info->intc_irq_num + gpio);
+	}
+
+	/*
+	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * controller only handling trigger modes.  We currently assume no
+	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+	 */
+	if (soc_info->gpio_unbanked) {
+		static struct irq_chip gpio_irqchip_unbanked;
+
+		/* pass "bank 0" GPIO IRQs to AINTC */
+		chips[0].chip.to_irq = gpio_to_irq_unbanked;
+		binten = BIT(0);
+
+		/* AINTC handles mask/unmask; GPIO handles triggering */
+		irq = bank_irq;
+		gpio_irqchip_unbanked = *get_irq_desc_chip(irq_to_desc(irq));
+		gpio_irqchip_unbanked.name = "GPIO-AINTC";
+		gpio_irqchip_unbanked.set_type = gpio_irq_type_unbanked;
+
+		/* default trigger: both edges */
+		g = gpio2controller(0);
+		__raw_writel(~0, &g->set_falling);
+		__raw_writel(~0, &g->set_rising);
+
+		/* set the direct IRQs up to use that irqchip */
+		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+			set_irq_chip(irq, &gpio_irqchip_unbanked);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
+			set_irq_chip_data(irq, g);
+			irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH;
+		}
+
+		goto done;
+	}
+
+	/*
+	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+	 * then chain through our own handler.
+	 */
 	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
 			gpio < ngpio;
 			bank++, bank_irq++) {
-		struct gpio_controller	*__iomem g = gpio2controller(gpio);
 		unsigned		i;
 
+		/* disabled by default, enabled only as needed */
+		g = gpio2controller(gpio);
 		__raw_writel(~0, &g->clr_falling);
 		__raw_writel(~0, &g->clr_rising);
 
@@ -309,6 +400,7 @@ static int __init davinci_gpio_irq_setup(void)
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
 			set_irq_chip_data(irq, g);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
@@ -316,6 +408,7 @@ static int __init davinci_gpio_irq_setup(void)
 		binten |= BIT(bank);
 	}
 
+done:
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index e0abc437d796..18e4ce34ece6 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -5,21 +5,73 @@
 #define __ASM_ARCH_DAVINCI_ASP_H
 
 #include <mach/irqs.h>
+#include <mach/edma.h>
 
-/* Bases of register banks */
+/* Bases of dm644x and dm355 register banks */
 #define DAVINCI_ASP0_BASE	0x01E02000
 #define DAVINCI_ASP1_BASE	0x01E04000
 
-/* EDMA channels */
+/* Bases of dm646x register banks */
+#define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
+#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
+
+/* Bases of da850/da830 McASP0  register banks */
+#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
+
+/* Bases of da830 McASP1 register banks */
+#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
+
+/* EDMA channels of dm644x and dm355 */
 #define DAVINCI_DMA_ASP0_TX	2
 #define DAVINCI_DMA_ASP0_RX	3
 #define DAVINCI_DMA_ASP1_TX	8
 #define DAVINCI_DMA_ASP1_RX	9
 
+/* EDMA channels of dm646x */
+#define	DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
+#define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
+#define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
+
+/* EDMA channels of da850/da830 McASP0 */
+#define	DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
+#define	DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
+
+/* EDMA channels of da830 McASP1 */
+#define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
+#define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
+
 /* Interrupts */
 #define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
 #define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
 
+struct snd_platform_data {
+	u32 tx_dma_offset;
+	u32 rx_dma_offset;
+	enum dma_event_q eventq_no;	/* event queue number */
+	unsigned int codec_fmt;
+
+	/* McASP specific fields */
+	int tdm_slots;
+	u8 op_mode;
+	u8 num_serializer;
+	u8 *serial_dir;
+	u8 version;
+	u8 txnumevt;
+	u8 rxnumevt;
+};
+
+enum {
+	MCASP_VERSION_1 = 0,	/* DM646x */
+	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
+};
+
+#define INACTIVE_MODE	0
+#define TX_MODE		1
+#define RX_MODE		2
+
+#define DAVINCI_MCASP_IIS_MODE	0
+#define DAVINCI_MCASP_DIT_MODE	1
+
 #endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a1f03b606d8f..1fd3917cae4e 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -60,10 +60,10 @@ struct davinci_soc_info {
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
 	struct davinci_timer_info	*timer_info;
-	void __iomem			*wdt_base;
 	void __iomem			*gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
+	unsigned			gpio_unbanked;
 	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index d12a5ed2959a..189b1ff13642 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -30,6 +30,9 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM6446		0x64460000
 #define	DAVINCI_CPU_ID_DM6467		0x64670000
 #define	DAVINCI_CPU_ID_DM355		0x03550000
+#define	DAVINCI_CPU_ID_DM365		0x03650000
+#define	DAVINCI_CPU_ID_DA830		0x08300000
+#define	DAVINCI_CPU_ID_DA850		0x08500000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -40,6 +43,9 @@ static inline int is_davinci_ ##type(void)				\
 IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
 IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
+IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
+IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
+IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -59,4 +65,22 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 #define cpu_is_davinci_dm355() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DM365
+#define cpu_is_davinci_dm365() is_davinci_dm365()
+#else
+#define cpu_is_davinci_dm365() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DA830
+#define cpu_is_davinci_da830() is_davinci_da830()
+#else
+#define cpu_is_davinci_da830() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+#define cpu_is_davinci_da850() is_davinci_da850()
+#else
+#define cpu_is_davinci_da850() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
new file mode 100644
index 000000000000..d4095d0572c6
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -0,0 +1,121 @@
+/*
+ * Chip specific defines for DA8XX/OMAP L1XX SoC
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
+#define __ASM_ARCH_DAVINCI_DA8XX_H
+
+#include <mach/serial.h>
+#include <mach/edma.h>
+#include <mach/i2c.h>
+#include <mach/emac.h>
+#include <mach/asp.h>
+#include <mach/mmc.h>
+
+/*
+ * The cp_intc interrupt controller for the da8xx isn't in the same
+ * chunk of physical memory space as the other registers (like it is
+ * on the davincis) so it needs to be mapped separately.  It will be
+ * mapped early on when the I/O space is mapped and we'll put it just
+ * before the I/O space in the processor's virtual memory space.
+ */
+#define DA8XX_CP_INTC_BASE	0xfffee000
+#define DA8XX_CP_INTC_SIZE	SZ_8K
+#define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
+
+#define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
+
+#define DA8XX_PSC0_BASE		0x01c10000
+#define DA8XX_PLL0_BASE		0x01c11000
+#define DA8XX_JTAG_ID_REG	0x01c14018
+#define DA8XX_TIMER64P0_BASE	0x01c20000
+#define DA8XX_TIMER64P1_BASE	0x01c21000
+#define DA8XX_GPIO_BASE		0x01e26000
+#define DA8XX_PSC1_BASE		0x01e27000
+#define DA8XX_LCD_CNTRL_BASE	0x01e13000
+#define DA8XX_MMCSD0_BASE	0x01c40000
+#define DA8XX_AEMIF_CS2_BASE	0x60000000
+#define DA8XX_AEMIF_CS3_BASE	0x62000000
+#define DA8XX_AEMIF_CTL_BASE	0x68000000
+
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define PINMUX5			0x14
+#define PINMUX6			0x18
+#define PINMUX7			0x1c
+#define PINMUX8			0x20
+#define PINMUX9			0x24
+#define PINMUX10		0x28
+#define PINMUX11		0x2c
+#define PINMUX12		0x30
+#define PINMUX13		0x34
+#define PINMUX14		0x38
+#define PINMUX15		0x3c
+#define PINMUX16		0x40
+#define PINMUX17		0x44
+#define PINMUX18		0x48
+#define PINMUX19		0x4c
+
+void __init da830_init(void);
+void __init da850_init(void);
+
+int da8xx_register_edma(void);
+int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
+int da8xx_register_watchdog(void);
+int da8xx_register_emac(void);
+int da8xx_register_lcdc(void);
+int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
+
+extern struct platform_device da8xx_serial_device;
+extern struct emac_platform_data da8xx_emac_pdata;
+
+extern const short da830_emif25_pins[];
+extern const short da830_spi0_pins[];
+extern const short da830_spi1_pins[];
+extern const short da830_mmc_sd_pins[];
+extern const short da830_uart0_pins[];
+extern const short da830_uart1_pins[];
+extern const short da830_uart2_pins[];
+extern const short da830_usb20_pins[];
+extern const short da830_usb11_pins[];
+extern const short da830_uhpi_pins[];
+extern const short da830_cpgmac_pins[];
+extern const short da830_emif3c_pins[];
+extern const short da830_mcasp0_pins[];
+extern const short da830_mcasp1_pins[];
+extern const short da830_mcasp2_pins[];
+extern const short da830_i2c0_pins[];
+extern const short da830_i2c1_pins[];
+extern const short da830_lcdcntl_pins[];
+extern const short da830_pwm_pins[];
+extern const short da830_ecap0_pins[];
+extern const short da830_ecap1_pins[];
+extern const short da830_ecap2_pins[];
+extern const short da830_eqep0_pins[];
+extern const short da830_eqep1_pins[];
+
+extern const short da850_uart0_pins[];
+extern const short da850_uart1_pins[];
+extern const short da850_uart2_pins[];
+extern const short da850_i2c0_pins[];
+extern const short da850_i2c1_pins[];
+extern const short da850_cpgmac_pins[];
+extern const short da850_mcasp_pins[];
+extern const short da850_lcdcntl_pins[];
+extern const short da850_mmcsd0_pins[];
+extern const short da850_nand_pins[];
+extern const short da850_nor_pins[];
+
+int da8xx_pinmux_setup(const short pins[]);
+
+#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index de3fc2182b47..17ab5236da66 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,7 +24,15 @@
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x01000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \
+	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+		orr	\rx, \rx, #0x00d00000	@ physical base address
+		orr	\rx, \rx, #0x0000d000	@ of UART 2
+#else
 		orr	\rx, \rx, #0x00c20000   @ UART 0
+#endif
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
index 54903b72438e..85536d8e8336 100644
--- a/arch/arm/mach-davinci/include/mach/dm355.h
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -12,11 +12,18 @@
 #define __ASM_ARCH_DM355_H
 
 #include <mach/hardware.h>
+#include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
+
+#define ASP1_TX_EVT_EN	1
+#define ASP1_RX_EVT_EN	2
 
 struct spi_board_info;
 
 void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		struct spi_board_info *info, unsigned len);
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
new file mode 100644
index 000000000000..09db4343bb4c
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_DM365_H
+#define __ASM_ARCH_DM665_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM365_EMAC_BASE			(0x01D07000)
+#define DM365_EMAC_CNTRL_OFFSET		(0x0000)
+#define DM365_EMAC_CNTRL_MOD_OFFSET	(0x3000)
+#define DM365_EMAC_CNTRL_RAM_OFFSET	(0x1000)
+#define DM365_EMAC_MDIO_OFFSET		(0x4000)
+#define DM365_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm365_init(void);
+
+#endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 15d42b92a8c9..0efb73852c2c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -25,6 +25,8 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -34,5 +36,7 @@
 #define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 void __init dm644x_init(void);
+void __init dm644x_init_asp(struct snd_platform_data *pdata);
+void dm644x_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM644X_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 1fc764c8646e..8cec746ae9d2 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -13,6 +13,9 @@
 
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -21,6 +24,68 @@
 #define DM646X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+#define DM646X_ATA_REG_BASE		(0x01C66000)
+
 void __init dm646x_init(void);
+void __init dm646x_init_ide(void);
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
+
+void dm646x_video_init(void);
+
+enum vpif_if_type {
+	VPIF_IF_BT656,
+	VPIF_IF_BT1120,
+	VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+	enum vpif_if_type if_type;
+	unsigned hd_pol:1;
+	unsigned vd_pol:1;
+	unsigned fid_pol:1;
+};
+
+struct vpif_subdev_info {
+	const char *name;
+	struct i2c_board_info board_info;
+	u32 input;
+	u32 output;
+	unsigned can_route:1;
+	struct vpif_interface vpif_if;
+};
+
+struct vpif_display_config {
+	int (*set_clock)(int, int);
+	struct vpif_subdev_info *subdevinfo;
+	int subdev_count;
+	const char **output;
+	int output_count;
+	const char *card_name;
+};
+
+struct vpif_input {
+	struct v4l2_input input;
+	const char *subdev_name;
+};
+
+#define VPIF_CAPTURE_MAX_CHANNELS	2
+
+struct vpif_capture_chan_config {
+	const struct vpif_input *inputs;
+	int input_count;
+};
+
+struct vpif_capture_config {
+	int (*setup_input_channel_mode)(int);
+	int (*setup_input_path)(int, const char *);
+	struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+	struct vpif_subdev_info *subdev_info;
+	int subdev_count;
+	const char *card_name;
+};
+
+void dm646x_setup_vpif(struct vpif_display_config *,
+		       struct vpif_capture_config *);
 
 #endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index 24a379239d7f..eb8bfd7925e7 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -139,6 +139,54 @@ struct edmacc_param {
 #define DAVINCI_DMA_PWM1                 53
 #define DAVINCI_DMA_PWM2                 54
 
+/* DA830 specific EDMA3 information */
+#define EDMA_DA830_NUM_DMACH		32
+#define EDMA_DA830_NUM_TCC		32
+#define EDMA_DA830_NUM_PARAMENTRY	128
+#define EDMA_DA830_NUM_EVQUE		2
+#define EDMA_DA830_NUM_TC		2
+#define EDMA_DA830_CHMAP_EXIST		0
+#define EDMA_DA830_NUM_REGIONS		4
+#define DA830_DMACH2EVENT_MAP0		0x000FC03Fu
+#define DA830_DMACH2EVENT_MAP1		0x00000000u
+#define DA830_EDMA_ARM_OWN		0x30FFCCFFu
+
+/* DA830 specific EDMA3 Events Information */
+enum DA830_edma_ch {
+	DA830_DMACH_MCASP0_RX,
+	DA830_DMACH_MCASP0_TX,
+	DA830_DMACH_MCASP1_RX,
+	DA830_DMACH_MCASP1_TX,
+	DA830_DMACH_MCASP2_RX,
+	DA830_DMACH_MCASP2_TX,
+	DA830_DMACH_GPIO_BNK0INT,
+	DA830_DMACH_GPIO_BNK1INT,
+	DA830_DMACH_UART0_RX,
+	DA830_DMACH_UART0_TX,
+	DA830_DMACH_TMR64P0_EVTOUT12,
+	DA830_DMACH_TMR64P0_EVTOUT34,
+	DA830_DMACH_UART1_RX,
+	DA830_DMACH_UART1_TX,
+	DA830_DMACH_SPI0_RX,
+	DA830_DMACH_SPI0_TX,
+	DA830_DMACH_MMCSD_RX,
+	DA830_DMACH_MMCSD_TX,
+	DA830_DMACH_SPI1_RX,
+	DA830_DMACH_SPI1_TX,
+	DA830_DMACH_DMAX_EVTOUT6,
+	DA830_DMACH_DMAX_EVTOUT7,
+	DA830_DMACH_GPIO_BNK2INT,
+	DA830_DMACH_GPIO_BNK3INT,
+	DA830_DMACH_I2C0_RX,
+	DA830_DMACH_I2C0_TX,
+	DA830_DMACH_I2C1_RX,
+	DA830_DMACH_I2C1_TX,
+	DA830_DMACH_GPIO_BNK4INT,
+	DA830_DMACH_GPIO_BNK5INT,
+	DA830_DMACH_UART2_RX,
+	DA830_DMACH_UART2_TX
+};
+
 /*ch_status paramater of callback function possible values*/
 #define DMA_COMPLETE 1
 #define DMA_CC_ERROR 2
@@ -162,6 +210,8 @@ enum fifo_width {
 enum dma_event_q {
 	EVENTQ_0 = 0,
 	EVENTQ_1 = 1,
+	EVENTQ_2 = 2,
+	EVENTQ_3 = 3,
 	EVENTQ_DEFAULT = -1
 };
 
@@ -170,8 +220,15 @@ enum sync_dimension {
 	ABSYNC = 1
 };
 
+#define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i)			((i) >> 16)
+#define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
+
 #define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
 #define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY		 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
 
 /* alloc/free DMA channels and their dedicated parameter RAM slots */
 int edma_alloc_channel(int channel,
@@ -180,9 +237,13 @@ int edma_alloc_channel(int channel,
 void edma_free_channel(unsigned channel);
 
 /* alloc/free parameter RAM slots */
-int edma_alloc_slot(int slot);
+int edma_alloc_slot(unsigned ctlr, int slot);
 void edma_free_slot(unsigned slot);
 
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
 /* calls that operate on part of a parameter RAM slot */
 void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width);
@@ -216,9 +277,13 @@ struct edma_soc_info {
 	unsigned	n_region;
 	unsigned	n_slot;
 	unsigned	n_tc;
+	unsigned	n_cc;
+	enum dma_event_q	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
+	const s8	(*queue_tc_mapping)[2];
+	const s8	(*queue_priority_mapping)[2];
 };
 
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ae0745568316..f3b8ef878158 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -42,6 +42,9 @@
  */
 #define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
 
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
 struct gpio_controller {
 	u32	dir;
 	u32	out_data;
@@ -78,6 +81,8 @@ __gpio_to_controller(unsigned gpio)
 		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
 		ptr = base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = base + 0xb0;
 	else
 		ptr = NULL;
 	return ptr;
@@ -142,15 +147,13 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	if (gpio >= DAVINCI_N_GPIO)
-		return -EINVAL;
-	return davinci_soc_info.intc_irq_num + gpio;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
-	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - davinci_soc_info.intc_irq_num;
+	/* don't support the reverse mapping */
+	return -ENOSYS;
 }
 
 #endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 48c77934d519..41c89386e39b 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -24,4 +24,21 @@
 /* System control register offsets */
 #define DM64XX_VDD3P3V_PWDN	0x48
 
+/*
+ * I/O mapping
+ */
+#define IO_PHYS				0x01c00000
+#define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE				0x00400000
+#define IO_VIRT				(IO_PHYS + IO_OFFSET)
+#define io_v2p(va)			((va) - IO_OFFSET)
+#define __IO_ADDRESS(x)			((x) + IO_OFFSET)
+#define IO_ADDRESS(pa)			IOMEM(__IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                	x
+#else
+#define IOMEM(x)                	((void __force __iomem *)(x))
+#endif
+
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index 2479785405af..62b0a90309ad 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -14,18 +14,6 @@
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-#define IO_PHYS		0x01c00000
-#define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
-#define IO_SIZE		0x00400000
-#define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define io_v2p(va)	((va) - IO_OFFSET)
-#define __IO_ADDRESS(x)	((x) + IO_OFFSET)
-
-/*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
@@ -33,19 +21,12 @@
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
-#define IO_ADDRESS(pa)          IOMEM(__IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)                x
-#else
-#define IOMEM(x)                ((void __force __iomem *)(x))
-
+#ifndef __ASSEMBLER__
 #define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
 #define __arch_iounmap(v)	davinci_iounmap(v)
 
 void __iomem *davinci_ioremap(unsigned long phys, size_t size,
 			      unsigned int type);
 void davinci_iounmap(volatile void __iomem *addr);
-
-#endif /* __ASSEMBLER__ */
+#endif
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index bc5d6aaa69a3..3c918a772619 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -99,9 +99,6 @@
 #define IRQ_EMUINT       63
 
 #define DAVINCI_N_AINTC_IRQ	64
-#define DAVINCI_N_GPIO		104
-
-#define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
 
 #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
 
@@ -206,4 +203,206 @@
 #define IRQ_DM355_GPIOBNK5	59
 #define IRQ_DM355_GPIOBNK6	60
 
+/* DaVinci DM365-specific Interrupts */
+#define IRQ_DM365_INSFINT	7
+#define IRQ_DM365_IMXINT1	8
+#define IRQ_DM365_IMXINT0	10
+#define IRQ_DM365_KLD_ARMINT	10
+#define IRQ_DM365_IMCOPINT	11
+#define IRQ_DM365_RTOINT	13
+#define IRQ_DM365_TINT5		14
+#define IRQ_DM365_TINT6		15
+#define IRQ_DM365_SPINT2_1	21
+#define IRQ_DM365_TINT7		22
+#define IRQ_DM365_SDIOINT0	23
+#define IRQ_DM365_MMCINT1	27
+#define IRQ_DM365_PWMINT3	28
+#define IRQ_DM365_SDIOINT1	31
+#define IRQ_DM365_SPIINT0_0	42
+#define IRQ_DM365_SPIINT3_0	43
+#define IRQ_DM365_GPIO0		44
+#define IRQ_DM365_GPIO1		45
+#define IRQ_DM365_GPIO2		46
+#define IRQ_DM365_GPIO3		47
+#define IRQ_DM365_GPIO4		48
+#define IRQ_DM365_GPIO5		49
+#define IRQ_DM365_GPIO6		50
+#define IRQ_DM365_GPIO7		51
+#define IRQ_DM365_EMAC_RXTHRESH	52
+#define IRQ_DM365_EMAC_RXPULSE	53
+#define IRQ_DM365_EMAC_TXPULSE	54
+#define IRQ_DM365_EMAC_MISCPULSE 55
+#define IRQ_DM365_GPIO12	56
+#define IRQ_DM365_GPIO13	57
+#define IRQ_DM365_GPIO14	58
+#define IRQ_DM365_GPIO15	59
+#define IRQ_DM365_ADCINT	59
+#define IRQ_DM365_KEYINT	60
+#define IRQ_DM365_TCERRINT2	61
+#define IRQ_DM365_TCERRINT3	62
+#define IRQ_DM365_EMUINT	63
+
+/* DA8XX interrupts */
+#define IRQ_DA8XX_COMMTX		0
+#define IRQ_DA8XX_COMMRX		1
+#define IRQ_DA8XX_NINT			2
+#define IRQ_DA8XX_EVTOUT0		3
+#define IRQ_DA8XX_EVTOUT1		4
+#define IRQ_DA8XX_EVTOUT2		5
+#define IRQ_DA8XX_EVTOUT3		6
+#define IRQ_DA8XX_EVTOUT4		7
+#define IRQ_DA8XX_EVTOUT5		8
+#define IRQ_DA8XX_EVTOUT6		9
+#define IRQ_DA8XX_EVTOUT7		10
+#define IRQ_DA8XX_CCINT0		11
+#define IRQ_DA8XX_CCERRINT		12
+#define IRQ_DA8XX_TCERRINT0		13
+#define IRQ_DA8XX_AEMIFINT		14
+#define IRQ_DA8XX_I2CINT0		15
+#define IRQ_DA8XX_MMCSDINT0		16
+#define IRQ_DA8XX_MMCSDINT1		17
+#define IRQ_DA8XX_ALLINT0		18
+#define IRQ_DA8XX_RTC			19
+#define IRQ_DA8XX_SPINT0		20
+#define IRQ_DA8XX_TINT12_0		21
+#define IRQ_DA8XX_TINT34_0		22
+#define IRQ_DA8XX_TINT12_1		23
+#define IRQ_DA8XX_TINT34_1		24
+#define IRQ_DA8XX_UARTINT0		25
+#define IRQ_DA8XX_KEYMGRINT		26
+#define IRQ_DA8XX_SECINT		26
+#define IRQ_DA8XX_SECKEYERR		26
+#define IRQ_DA8XX_CHIPINT0		28
+#define IRQ_DA8XX_CHIPINT1		29
+#define IRQ_DA8XX_CHIPINT2		30
+#define IRQ_DA8XX_CHIPINT3		31
+#define IRQ_DA8XX_TCERRINT1		32
+#define IRQ_DA8XX_C0_RX_THRESH_PULSE	33
+#define IRQ_DA8XX_C0_RX_PULSE		34
+#define IRQ_DA8XX_C0_TX_PULSE		35
+#define IRQ_DA8XX_C0_MISC_PULSE		36
+#define IRQ_DA8XX_C1_RX_THRESH_PULSE	37
+#define IRQ_DA8XX_C1_RX_PULSE		38
+#define IRQ_DA8XX_C1_TX_PULSE		39
+#define IRQ_DA8XX_C1_MISC_PULSE		40
+#define IRQ_DA8XX_MEMERR		41
+#define IRQ_DA8XX_GPIO0			42
+#define IRQ_DA8XX_GPIO1			43
+#define IRQ_DA8XX_GPIO2			44
+#define IRQ_DA8XX_GPIO3			45
+#define IRQ_DA8XX_GPIO4			46
+#define IRQ_DA8XX_GPIO5			47
+#define IRQ_DA8XX_GPIO6			48
+#define IRQ_DA8XX_GPIO7			49
+#define IRQ_DA8XX_GPIO8			50
+#define IRQ_DA8XX_I2CINT1		51
+#define IRQ_DA8XX_LCDINT		52
+#define IRQ_DA8XX_UARTINT1		53
+#define IRQ_DA8XX_MCASPINT		54
+#define IRQ_DA8XX_ALLINT1		55
+#define IRQ_DA8XX_SPINT1		56
+#define IRQ_DA8XX_UHPI_INT1		57
+#define IRQ_DA8XX_USB_INT		58
+#define IRQ_DA8XX_IRQN			59
+#define IRQ_DA8XX_RWAKEUP		60
+#define IRQ_DA8XX_UARTINT2		61
+#define IRQ_DA8XX_DFTSSINT		62
+#define IRQ_DA8XX_EHRPWM0		63
+#define IRQ_DA8XX_EHRPWM0TZ		64
+#define IRQ_DA8XX_EHRPWM1		65
+#define IRQ_DA8XX_EHRPWM1TZ		66
+#define IRQ_DA8XX_ECAP0			69
+#define IRQ_DA8XX_ECAP1			70
+#define IRQ_DA8XX_ECAP2			71
+#define IRQ_DA8XX_ARMCLKSTOPREQ		90
+
+/* DA830 specific interrupts */
+#define IRQ_DA830_MPUERR		27
+#define IRQ_DA830_IOPUERR		27
+#define IRQ_DA830_BOOTCFGERR		27
+#define IRQ_DA830_EHRPWM2		67
+#define IRQ_DA830_EHRPWM2TZ		68
+#define IRQ_DA830_EQEP0			72
+#define IRQ_DA830_EQEP1			73
+#define IRQ_DA830_T12CMPINT0_0		74
+#define IRQ_DA830_T12CMPINT1_0		75
+#define IRQ_DA830_T12CMPINT2_0		76
+#define IRQ_DA830_T12CMPINT3_0		77
+#define IRQ_DA830_T12CMPINT4_0		78
+#define IRQ_DA830_T12CMPINT5_0		79
+#define IRQ_DA830_T12CMPINT6_0		80
+#define IRQ_DA830_T12CMPINT7_0		81
+#define IRQ_DA830_T12CMPINT0_1		82
+#define IRQ_DA830_T12CMPINT1_1		83
+#define IRQ_DA830_T12CMPINT2_1		84
+#define IRQ_DA830_T12CMPINT3_1		85
+#define IRQ_DA830_T12CMPINT4_1		86
+#define IRQ_DA830_T12CMPINT5_1		87
+#define IRQ_DA830_T12CMPINT6_1		88
+#define IRQ_DA830_T12CMPINT7_1		89
+
+#define DA830_N_CP_INTC_IRQ		96
+
+/* DA850 speicific interrupts */
+#define IRQ_DA850_MPUADDRERR0		27
+#define IRQ_DA850_MPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR0		27
+#define IRQ_DA850_IOPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR1		27
+#define IRQ_DA850_IOPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR2		27
+#define IRQ_DA850_IOPUPROTERR2		27
+#define IRQ_DA850_BOOTCFG_ADDR_ERR	27
+#define IRQ_DA850_BOOTCFG_PROT_ERR	27
+#define IRQ_DA850_MPUADDRERR1		27
+#define IRQ_DA850_MPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR3		27
+#define IRQ_DA850_IOPUPROTERR3		27
+#define IRQ_DA850_IOPUADDRERR4		27
+#define IRQ_DA850_IOPUPROTERR4		27
+#define IRQ_DA850_IOPUADDRERR5		27
+#define IRQ_DA850_IOPUPROTERR5		27
+#define IRQ_DA850_MIOPU_BOOTCFG_ERR	27
+#define IRQ_DA850_SATAINT		67
+#define IRQ_DA850_TINT12_2		68
+#define IRQ_DA850_TINT34_2		68
+#define IRQ_DA850_TINTALL_2		68
+#define IRQ_DA850_MMCSDINT0_1		72
+#define IRQ_DA850_MMCSDINT1_1		73
+#define IRQ_DA850_T12CMPINT0_2		74
+#define IRQ_DA850_T12CMPINT1_2		75
+#define IRQ_DA850_T12CMPINT2_2		76
+#define IRQ_DA850_T12CMPINT3_2		77
+#define IRQ_DA850_T12CMPINT4_2		78
+#define IRQ_DA850_T12CMPINT5_2		79
+#define IRQ_DA850_T12CMPINT6_2		80
+#define IRQ_DA850_T12CMPINT7_2		81
+#define IRQ_DA850_T12CMPINT0_3		82
+#define IRQ_DA850_T12CMPINT1_3		83
+#define IRQ_DA850_T12CMPINT2_3		84
+#define IRQ_DA850_T12CMPINT3_3		85
+#define IRQ_DA850_T12CMPINT4_3		86
+#define IRQ_DA850_T12CMPINT5_3		87
+#define IRQ_DA850_T12CMPINT6_3		88
+#define IRQ_DA850_T12CMPINT7_3		89
+#define IRQ_DA850_RPIINT		91
+#define IRQ_DA850_VPIFINT		92
+#define IRQ_DA850_CCINT1		93
+#define IRQ_DA850_CCERRINT1		94
+#define IRQ_DA850_TCERRINT2		95
+#define IRQ_DA850_TINT12_3		96
+#define IRQ_DA850_TINT34_3		96
+#define IRQ_DA850_TINTALL_3		96
+#define IRQ_DA850_MCBSP0RINT		97
+#define IRQ_DA850_MCBSP0XINT		98
+#define IRQ_DA850_MCBSP1RINT		99
+#define IRQ_DA850_MCBSP1XINT		100
+
+#define DA850_N_CP_INTC_IRQ		101
+
+/* da850 currently has the most gpio pins (144) */
+#define DAVINCI_N_GPIO			144
+/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
+#define NR_IRQS				(DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index c712c7cdf38f..80309aed534a 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -20,9 +20,16 @@
 /**************************************************************************
  * Definitions
  **************************************************************************/
-#define DAVINCI_DDR_BASE    0x80000000
+#define DAVINCI_DDR_BASE	0x80000000
+#define DA8XX_DDR_BASE		0xc0000000
 
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
+#define PHYS_OFFSET DA8XX_DDR_BASE
+#else
 #define PHYS_OFFSET DAVINCI_DDR_BASE
+#endif
 
 /*
  * Increase size of DMA-consistent memory region
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 27378458542f..bb84893a4e83 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -154,6 +154,737 @@ enum davinci_dm355_index {
 	DM355_EVT8_ASP1_TX,
 	DM355_EVT9_ASP1_RX,
 	DM355_EVT26_MMC0_RX,
+
+	/* Video Out */
+	DM355_VOUT_FIELD,
+	DM355_VOUT_FIELD_G70,
+	DM355_VOUT_HVSYNC,
+	DM355_VOUT_COUTL_EN,
+	DM355_VOUT_COUTH_EN,
+
+	/* Video In Pin Mux */
+	DM355_VIN_PCLK,
+	DM355_VIN_CAM_WEN,
+	DM355_VIN_CAM_VD,
+	DM355_VIN_CAM_HD,
+	DM355_VIN_YIN_EN,
+	DM355_VIN_CINL_EN,
+	DM355_VIN_CINH_EN,
+};
+
+enum davinci_dm365_index {
+	/* MMC/SD 0 */
+	DM365_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM365_SD1_CLK,
+	DM365_SD1_CMD,
+	DM365_SD1_DATA3,
+	DM365_SD1_DATA2,
+	DM365_SD1_DATA1,
+	DM365_SD1_DATA0,
+
+	/* I2C */
+	DM365_I2C_SDA,
+	DM365_I2C_SCL,
+
+	/* AEMIF */
+	DM365_AEMIF_AR,
+	DM365_AEMIF_A3,
+	DM365_AEMIF_A7,
+	DM365_AEMIF_D15_8,
+	DM365_AEMIF_CE0,
+
+	/* ASP0 function */
+	DM365_MCBSP0_BDX,
+	DM365_MCBSP0_X,
+	DM365_MCBSP0_BFSX,
+	DM365_MCBSP0_BDR,
+	DM365_MCBSP0_R,
+	DM365_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM365_SPI0_SCLK,
+	DM365_SPI0_SDI,
+	DM365_SPI0_SDO,
+	DM365_SPI0_SDENA0,
+	DM365_SPI0_SDENA1,
+
+	/* UART */
+	DM365_UART0_RXD,
+	DM365_UART0_TXD,
+	DM365_UART1_RXD,
+	DM365_UART1_TXD,
+	DM365_UART1_RTS,
+	DM365_UART1_CTS,
+
+	/* EMAC */
+	DM365_EMAC_TX_EN,
+	DM365_EMAC_TX_CLK,
+	DM365_EMAC_COL,
+	DM365_EMAC_TXD3,
+	DM365_EMAC_TXD2,
+	DM365_EMAC_TXD1,
+	DM365_EMAC_TXD0,
+	DM365_EMAC_RXD3,
+	DM365_EMAC_RXD2,
+	DM365_EMAC_RXD1,
+	DM365_EMAC_RXD0,
+	DM365_EMAC_RX_CLK,
+	DM365_EMAC_RX_DV,
+	DM365_EMAC_RX_ER,
+	DM365_EMAC_CRS,
+	DM365_EMAC_MDIO,
+	DM365_EMAC_MDCLK,
+
+	/* Keypad */
+	DM365_KEYPAD,
+
+	/* PWM */
+	DM365_PWM0,
+	DM365_PWM0_G23,
+	DM365_PWM1,
+	DM365_PWM1_G25,
+	DM365_PWM2_G87,
+	DM365_PWM2_G88,
+	DM365_PWM2_G89,
+	DM365_PWM2_G90,
+	DM365_PWM3_G80,
+	DM365_PWM3_G81,
+	DM365_PWM3_G85,
+	DM365_PWM3_G86,
+
+	/* SPI1 */
+	DM365_SPI1_SCLK,
+	DM365_SPI1_SDO,
+	DM365_SPI1_SDI,
+	DM365_SPI1_SDENA0,
+	DM365_SPI1_SDENA1,
+
+	/* SPI2 */
+	DM365_SPI2_SCLK,
+	DM365_SPI2_SDO,
+	DM365_SPI2_SDI,
+	DM365_SPI2_SDENA0,
+	DM365_SPI2_SDENA1,
+
+	/* SPI3 */
+	DM365_SPI3_SCLK,
+	DM365_SPI3_SDO,
+	DM365_SPI3_SDI,
+	DM365_SPI3_SDENA0,
+	DM365_SPI3_SDENA1,
+
+	/* SPI4 */
+	DM365_SPI4_SCLK,
+	DM365_SPI4_SDO,
+	DM365_SPI4_SDI,
+	DM365_SPI4_SDENA0,
+	DM365_SPI4_SDENA1,
+
+	/* GPIO */
+	DM365_GPIO20,
+	DM365_GPIO33,
+	DM365_GPIO40,
+
+	/* Video */
+	DM365_VOUT_FIELD,
+	DM365_VOUT_FIELD_G81,
+	DM365_VOUT_HVSYNC,
+	DM365_VOUT_COUTL_EN,
+	DM365_VOUT_COUTH_EN,
+	DM365_VIN_CAM_WEN,
+	DM365_VIN_CAM_VD,
+	DM365_VIN_CAM_HD,
+	DM365_VIN_YIN4_7_EN,
+	DM365_VIN_YIN0_3_EN,
+
+	/* IRQ muxing */
+	DM365_INT_EDMA_CC,
+	DM365_INT_EDMA_TC0_ERR,
+	DM365_INT_EDMA_TC1_ERR,
+	DM365_INT_EDMA_TC2_ERR,
+	DM365_INT_EDMA_TC3_ERR,
+	DM365_INT_PRTCSS,
+	DM365_INT_EMAC_RXTHRESH,
+	DM365_INT_EMAC_RXPULSE,
+	DM365_INT_EMAC_TXPULSE,
+	DM365_INT_EMAC_MISCPULSE,
+	DM365_INT_IMX0_ENABLE,
+	DM365_INT_IMX0_DISABLE,
+	DM365_INT_HDVICP_ENABLE,
+	DM365_INT_HDVICP_DISABLE,
+	DM365_INT_IMX1_ENABLE,
+	DM365_INT_IMX1_DISABLE,
+	DM365_INT_NSF_ENABLE,
+	DM365_INT_NSF_DISABLE,
+
+	/* EDMA event muxing */
+	DM365_EVT2_ASP_TX,
+	DM365_EVT3_ASP_RX,
+	DM365_EVT26_MMC0_RX,
+};
+
+enum da830_index {
+	DA830_GPIO7_14,
+	DA830_RTCK,
+	DA830_GPIO7_15,
+	DA830_EMU_0,
+	DA830_EMB_SDCKE,
+	DA830_EMB_CLK_GLUE,
+	DA830_EMB_CLK,
+	DA830_NEMB_CS_0,
+	DA830_NEMB_CAS,
+	DA830_NEMB_RAS,
+	DA830_NEMB_WE,
+	DA830_EMB_BA_1,
+	DA830_EMB_BA_0,
+	DA830_EMB_A_0,
+	DA830_EMB_A_1,
+	DA830_EMB_A_2,
+	DA830_EMB_A_3,
+	DA830_EMB_A_4,
+	DA830_EMB_A_5,
+	DA830_GPIO7_0,
+	DA830_GPIO7_1,
+	DA830_GPIO7_2,
+	DA830_GPIO7_3,
+	DA830_GPIO7_4,
+	DA830_GPIO7_5,
+	DA830_GPIO7_6,
+	DA830_GPIO7_7,
+	DA830_EMB_A_6,
+	DA830_EMB_A_7,
+	DA830_EMB_A_8,
+	DA830_EMB_A_9,
+	DA830_EMB_A_10,
+	DA830_EMB_A_11,
+	DA830_EMB_A_12,
+	DA830_EMB_D_31,
+	DA830_GPIO7_8,
+	DA830_GPIO7_9,
+	DA830_GPIO7_10,
+	DA830_GPIO7_11,
+	DA830_GPIO7_12,
+	DA830_GPIO7_13,
+	DA830_GPIO3_13,
+	DA830_EMB_D_30,
+	DA830_EMB_D_29,
+	DA830_EMB_D_28,
+	DA830_EMB_D_27,
+	DA830_EMB_D_26,
+	DA830_EMB_D_25,
+	DA830_EMB_D_24,
+	DA830_EMB_D_23,
+	DA830_EMB_D_22,
+	DA830_EMB_D_21,
+	DA830_EMB_D_20,
+	DA830_EMB_D_19,
+	DA830_EMB_D_18,
+	DA830_EMB_D_17,
+	DA830_EMB_D_16,
+	DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2,
+	DA830_EMB_D_0,
+	DA830_EMB_D_1,
+	DA830_EMB_D_2,
+	DA830_EMB_D_3,
+	DA830_EMB_D_4,
+	DA830_EMB_D_5,
+	DA830_EMB_D_6,
+	DA830_GPIO6_0,
+	DA830_GPIO6_1,
+	DA830_GPIO6_2,
+	DA830_GPIO6_3,
+	DA830_GPIO6_4,
+	DA830_GPIO6_5,
+	DA830_GPIO6_6,
+	DA830_EMB_D_7,
+	DA830_EMB_D_8,
+	DA830_EMB_D_9,
+	DA830_EMB_D_10,
+	DA830_EMB_D_11,
+	DA830_EMB_D_12,
+	DA830_EMB_D_13,
+	DA830_EMB_D_14,
+	DA830_GPIO6_7,
+	DA830_GPIO6_8,
+	DA830_GPIO6_9,
+	DA830_GPIO6_10,
+	DA830_GPIO6_11,
+	DA830_GPIO6_12,
+	DA830_GPIO6_13,
+	DA830_GPIO6_14,
+	DA830_EMB_D_15,
+	DA830_NEMB_WE_DQM_1,
+	DA830_NEMB_WE_DQM_0,
+	DA830_SPI0_SOMI_0,
+	DA830_SPI0_SIMO_0,
+	DA830_SPI0_CLK,
+	DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	DA830_EQEP0I,
+	DA830_EQEP0S,
+	DA830_EQEP1I,
+	DA830_NUART0_CTS,
+	DA830_NUART0_RTS,
+	DA830_EQEP0A,
+	DA830_EQEP0B,
+	DA830_GPIO6_15,
+	DA830_GPIO5_14,
+	DA830_GPIO5_15,
+	DA830_GPIO5_0,
+	DA830_GPIO5_1,
+	DA830_GPIO5_2,
+	DA830_GPIO5_3,
+	DA830_GPIO5_4,
+	DA830_SPI1_SOMI_0,
+	DA830_SPI1_SIMO_0,
+	DA830_SPI1_CLK,
+	DA830_UART0_RXD,
+	DA830_UART0_TXD,
+	DA830_AXR1_10,
+	DA830_AXR1_11,
+	DA830_NSPI1_ENA,
+	DA830_I2C1_SCL,
+	DA830_I2C1_SDA,
+	DA830_EQEP1S,
+	DA830_I2C0_SDA,
+	DA830_I2C0_SCL,
+	DA830_UART2_RXD,
+	DA830_TM64P0_IN12,
+	DA830_TM64P0_OUT12,
+	DA830_GPIO5_5,
+	DA830_GPIO5_6,
+	DA830_GPIO5_7,
+	DA830_GPIO5_8,
+	DA830_GPIO5_9,
+	DA830_GPIO5_10,
+	DA830_GPIO5_11,
+	DA830_GPIO5_12,
+	DA830_NSPI1_SCS_0,
+	DA830_USB0_DRVVBUS,
+	DA830_AHCLKX0,
+	DA830_ACLKX0,
+	DA830_AFSX0,
+	DA830_AHCLKR0,
+	DA830_ACLKR0,
+	DA830_AFSR0,
+	DA830_UART2_TXD,
+	DA830_AHCLKX2,
+	DA830_ECAP0_APWM0,
+	DA830_RMII_MHZ_50_CLK,
+	DA830_ECAP1_APWM1,
+	DA830_USB_REFCLKIN,
+	DA830_GPIO5_13,
+	DA830_GPIO4_15,
+	DA830_GPIO2_11,
+	DA830_GPIO2_12,
+	DA830_GPIO2_13,
+	DA830_GPIO2_14,
+	DA830_GPIO2_15,
+	DA830_GPIO3_12,
+	DA830_AMUTE0,
+	DA830_AXR0_0,
+	DA830_AXR0_1,
+	DA830_AXR0_2,
+	DA830_AXR0_3,
+	DA830_AXR0_4,
+	DA830_AXR0_5,
+	DA830_AXR0_6,
+	DA830_RMII_TXD_0,
+	DA830_RMII_TXD_1,
+	DA830_RMII_TXEN,
+	DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0,
+	DA830_RMII_RXD_1,
+	DA830_RMII_RXER,
+	DA830_AFSR2,
+	DA830_ACLKX2,
+	DA830_AXR2_3,
+	DA830_AXR2_2,
+	DA830_AXR2_1,
+	DA830_AFSX2,
+	DA830_ACLKR2,
+	DA830_NRESETOUT,
+	DA830_GPIO3_0,
+	DA830_GPIO3_1,
+	DA830_GPIO3_2,
+	DA830_GPIO3_3,
+	DA830_GPIO3_4,
+	DA830_GPIO3_5,
+	DA830_GPIO3_6,
+	DA830_AXR0_7,
+	DA830_AXR0_8,
+	DA830_UART1_RXD,
+	DA830_UART1_TXD,
+	DA830_AXR0_11,
+	DA830_AHCLKX1,
+	DA830_ACLKX1,
+	DA830_AFSX1,
+	DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	DA830_AXR0_9,
+	DA830_AXR0_10,
+	DA830_EPWM0B,
+	DA830_EPWM0A,
+	DA830_EPWMSYNCI,
+	DA830_AXR2_0,
+	DA830_EPWMSYNC0,
+	DA830_GPIO3_7,
+	DA830_GPIO3_8,
+	DA830_GPIO3_9,
+	DA830_GPIO3_10,
+	DA830_GPIO3_11,
+	DA830_GPIO3_14,
+	DA830_GPIO3_15,
+	DA830_GPIO4_10,
+	DA830_AHCLKR1,
+	DA830_ACLKR1,
+	DA830_AFSR1,
+	DA830_AMUTE1,
+	DA830_AXR1_0,
+	DA830_AXR1_1,
+	DA830_AXR1_2,
+	DA830_AXR1_3,
+	DA830_ECAP2_APWM2,
+	DA830_EHRPWMGLUETZ,
+	DA830_EQEP1A,
+	DA830_GPIO4_11,
+	DA830_GPIO4_12,
+	DA830_GPIO4_13,
+	DA830_GPIO4_14,
+	DA830_GPIO4_0,
+	DA830_GPIO4_1,
+	DA830_GPIO4_2,
+	DA830_GPIO4_3,
+	DA830_AXR1_4,
+	DA830_AXR1_5,
+	DA830_AXR1_6,
+	DA830_AXR1_7,
+	DA830_AXR1_8,
+	DA830_AXR1_9,
+	DA830_EMA_D_0,
+	DA830_EMA_D_1,
+	DA830_EQEP1B,
+	DA830_EPWM2B,
+	DA830_EPWM2A,
+	DA830_EPWM1B,
+	DA830_EPWM1A,
+	DA830_MMCSD_DAT_0,
+	DA830_MMCSD_DAT_1,
+	DA830_UHPI_HD_0,
+	DA830_UHPI_HD_1,
+	DA830_GPIO4_4,
+	DA830_GPIO4_5,
+	DA830_GPIO4_6,
+	DA830_GPIO4_7,
+	DA830_GPIO4_8,
+	DA830_GPIO4_9,
+	DA830_GPIO0_0,
+	DA830_GPIO0_1,
+	DA830_EMA_D_2,
+	DA830_EMA_D_3,
+	DA830_EMA_D_4,
+	DA830_EMA_D_5,
+	DA830_EMA_D_6,
+	DA830_EMA_D_7,
+	DA830_EMA_D_8,
+	DA830_EMA_D_9,
+	DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3,
+	DA830_MMCSD_DAT_4,
+	DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6,
+	DA830_MMCSD_DAT_7,
+	DA830_UHPI_HD_8,
+	DA830_UHPI_HD_9,
+	DA830_UHPI_HD_2,
+	DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4,
+	DA830_UHPI_HD_5,
+	DA830_UHPI_HD_6,
+	DA830_UHPI_HD_7,
+	DA830_LCD_D_8,
+	DA830_LCD_D_9,
+	DA830_GPIO0_2,
+	DA830_GPIO0_3,
+	DA830_GPIO0_4,
+	DA830_GPIO0_5,
+	DA830_GPIO0_6,
+	DA830_GPIO0_7,
+	DA830_GPIO0_8,
+	DA830_GPIO0_9,
+	DA830_EMA_D_10,
+	DA830_EMA_D_11,
+	DA830_EMA_D_12,
+	DA830_EMA_D_13,
+	DA830_EMA_D_14,
+	DA830_EMA_D_15,
+	DA830_EMA_A_0,
+	DA830_EMA_A_1,
+	DA830_UHPI_HD_10,
+	DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12,
+	DA830_UHPI_HD_13,
+	DA830_UHPI_HD_14,
+	DA830_UHPI_HD_15,
+	DA830_LCD_D_7,
+	DA830_MMCSD_CLK,
+	DA830_LCD_D_10,
+	DA830_LCD_D_11,
+	DA830_LCD_D_12,
+	DA830_LCD_D_13,
+	DA830_LCD_D_14,
+	DA830_LCD_D_15,
+	DA830_UHPI_HCNTL0,
+	DA830_GPIO0_10,
+	DA830_GPIO0_11,
+	DA830_GPIO0_12,
+	DA830_GPIO0_13,
+	DA830_GPIO0_14,
+	DA830_GPIO0_15,
+	DA830_GPIO1_0,
+	DA830_GPIO1_1,
+	DA830_EMA_A_2,
+	DA830_EMA_A_3,
+	DA830_EMA_A_4,
+	DA830_EMA_A_5,
+	DA830_EMA_A_6,
+	DA830_EMA_A_7,
+	DA830_EMA_A_8,
+	DA830_EMA_A_9,
+	DA830_MMCSD_CMD,
+	DA830_LCD_D_6,
+	DA830_LCD_D_3,
+	DA830_LCD_D_2,
+	DA830_LCD_D_1,
+	DA830_LCD_D_0,
+	DA830_LCD_PCLK,
+	DA830_LCD_HSYNC,
+	DA830_UHPI_HCNTL1,
+	DA830_GPIO1_2,
+	DA830_GPIO1_3,
+	DA830_GPIO1_4,
+	DA830_GPIO1_5,
+	DA830_GPIO1_6,
+	DA830_GPIO1_7,
+	DA830_GPIO1_8,
+	DA830_GPIO1_9,
+	DA830_EMA_A_10,
+	DA830_EMA_A_11,
+	DA830_EMA_A_12,
+	DA830_EMA_BA_1,
+	DA830_EMA_BA_0,
+	DA830_EMA_CLK,
+	DA830_EMA_SDCKE,
+	DA830_NEMA_CAS,
+	DA830_LCD_VSYNC,
+	DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	DA830_LCD_D_5,
+	DA830_LCD_D_4,
+	DA830_OBSCLK,
+	DA830_NEMA_CS_4,
+	DA830_UHPI_HHWIL,
+	DA830_AHCLKR2,
+	DA830_GPIO1_10,
+	DA830_GPIO1_11,
+	DA830_GPIO1_12,
+	DA830_GPIO1_13,
+	DA830_GPIO1_14,
+	DA830_GPIO1_15,
+	DA830_GPIO2_0,
+	DA830_GPIO2_1,
+	DA830_NEMA_RAS,
+	DA830_NEMA_WE,
+	DA830_NEMA_CS_0,
+	DA830_NEMA_CS_2,
+	DA830_NEMA_CS_3,
+	DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1,
+	DA830_NEMA_WE_DQM_0,
+	DA830_NEMA_CS_5,
+	DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS,
+	DA830_NUHPI_HCS,
+	DA830_NUHPI_HDS1,
+	DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT,
+	DA830_AXR0_12,
+	DA830_AMUTE2,
+	DA830_AXR0_13,
+	DA830_AXR0_14,
+	DA830_AXR0_15,
+	DA830_GPIO2_2,
+	DA830_GPIO2_3,
+	DA830_GPIO2_4,
+	DA830_GPIO2_5,
+	DA830_GPIO2_6,
+	DA830_GPIO2_7,
+	DA830_GPIO2_8,
+	DA830_GPIO2_9,
+	DA830_EMA_WAIT_0,
+	DA830_NUHPI_HRDY,
+	DA830_GPIO2_10,
+};
+
+enum davinci_da850_index {
+	/* UART0 function */
+	DA850_NUART0_CTS,
+	DA850_NUART0_RTS,
+	DA850_UART0_RXD,
+	DA850_UART0_TXD,
+
+	/* UART1 function */
+	DA850_NUART1_CTS,
+	DA850_NUART1_RTS,
+	DA850_UART1_RXD,
+	DA850_UART1_TXD,
+
+	/* UART2 function */
+	DA850_NUART2_CTS,
+	DA850_NUART2_RTS,
+	DA850_UART2_RXD,
+	DA850_UART2_TXD,
+
+	/* I2C1 function */
+	DA850_I2C1_SCL,
+	DA850_I2C1_SDA,
+
+	/* I2C0 function */
+	DA850_I2C0_SDA,
+	DA850_I2C0_SCL,
+
+	/* EMAC function */
+	DA850_MII_TXEN,
+	DA850_MII_TXCLK,
+	DA850_MII_COL,
+	DA850_MII_TXD_3,
+	DA850_MII_TXD_2,
+	DA850_MII_TXD_1,
+	DA850_MII_TXD_0,
+	DA850_MII_RXER,
+	DA850_MII_CRS,
+	DA850_MII_RXCLK,
+	DA850_MII_RXDV,
+	DA850_MII_RXD_3,
+	DA850_MII_RXD_2,
+	DA850_MII_RXD_1,
+	DA850_MII_RXD_0,
+	DA850_MDIO_CLK,
+	DA850_MDIO_D,
+
+	/* McASP function */
+	DA850_ACLKR,
+	DA850_ACLKX,
+	DA850_AFSR,
+	DA850_AFSX,
+	DA850_AHCLKR,
+	DA850_AHCLKX,
+	DA850_AMUTE,
+	DA850_AXR_15,
+	DA850_AXR_14,
+	DA850_AXR_13,
+	DA850_AXR_12,
+	DA850_AXR_11,
+	DA850_AXR_10,
+	DA850_AXR_9,
+	DA850_AXR_8,
+	DA850_AXR_7,
+	DA850_AXR_6,
+	DA850_AXR_5,
+	DA850_AXR_4,
+	DA850_AXR_3,
+	DA850_AXR_2,
+	DA850_AXR_1,
+	DA850_AXR_0,
+
+	/* LCD function */
+	DA850_LCD_D_7,
+	DA850_LCD_D_6,
+	DA850_LCD_D_5,
+	DA850_LCD_D_4,
+	DA850_LCD_D_3,
+	DA850_LCD_D_2,
+	DA850_LCD_D_1,
+	DA850_LCD_D_0,
+	DA850_LCD_D_15,
+	DA850_LCD_D_14,
+	DA850_LCD_D_13,
+	DA850_LCD_D_12,
+	DA850_LCD_D_11,
+	DA850_LCD_D_10,
+	DA850_LCD_D_9,
+	DA850_LCD_D_8,
+	DA850_LCD_PCLK,
+	DA850_LCD_HSYNC,
+	DA850_LCD_VSYNC,
+	DA850_NLCD_AC_ENB_CS,
+
+	/* MMC/SD0 function */
+	DA850_MMCSD0_DAT_0,
+	DA850_MMCSD0_DAT_1,
+	DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3,
+	DA850_MMCSD0_CLK,
+	DA850_MMCSD0_CMD,
+
+	/* EMIF2.5/EMIFA function */
+	DA850_EMA_D_7,
+	DA850_EMA_D_6,
+	DA850_EMA_D_5,
+	DA850_EMA_D_4,
+	DA850_EMA_D_3,
+	DA850_EMA_D_2,
+	DA850_EMA_D_1,
+	DA850_EMA_D_0,
+	DA850_EMA_A_1,
+	DA850_EMA_A_2,
+	DA850_NEMA_CS_3,
+	DA850_NEMA_CS_4,
+	DA850_NEMA_WE,
+	DA850_NEMA_OE,
+	DA850_EMA_D_15,
+	DA850_EMA_D_14,
+	DA850_EMA_D_13,
+	DA850_EMA_D_12,
+	DA850_EMA_D_11,
+	DA850_EMA_D_10,
+	DA850_EMA_D_9,
+	DA850_EMA_D_8,
+	DA850_EMA_A_0,
+	DA850_EMA_A_3,
+	DA850_EMA_A_4,
+	DA850_EMA_A_5,
+	DA850_EMA_A_6,
+	DA850_EMA_A_7,
+	DA850_EMA_A_8,
+	DA850_EMA_A_9,
+	DA850_EMA_A_10,
+	DA850_EMA_A_11,
+	DA850_EMA_A_12,
+	DA850_EMA_A_13,
+	DA850_EMA_A_14,
+	DA850_EMA_A_15,
+	DA850_EMA_A_16,
+	DA850_EMA_A_17,
+	DA850_EMA_A_18,
+	DA850_EMA_A_19,
+	DA850_EMA_A_20,
+	DA850_EMA_A_21,
+	DA850_EMA_A_22,
+	DA850_EMA_A_23,
+	DA850_EMA_BA_1,
+	DA850_EMA_CLK,
+	DA850_EMA_WAIT_1,
+	DA850_NEMA_CS_2,
+
+	/* GPIO function */
+	DA850_GPIO2_15,
+	DA850_GPIO8_10,
+	DA850_GPIO4_0,
+	DA850_GPIO4_1,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index ab8a2586d1cc..171173c1dbad 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -81,6 +81,24 @@
 #define DM355_LPSC_RTO			12
 #define DM355_LPSC_VPSS_DAC		41
 
+/* DM365 */
+#define DM365_LPSC_TIMER3	5
+#define DM365_LPSC_SPI1		6
+#define DM365_LPSC_MMC_SD1	7
+#define DM365_LPSC_McBSP1	8
+#define DM365_LPSC_PWM3		10
+#define DM365_LPSC_SPI2		11
+#define DM365_LPSC_RTO		12
+#define DM365_LPSC_TIMER4	17
+#define DM365_LPSC_SPI0		22
+#define DM365_LPSC_SPI3		38
+#define DM365_LPSC_SPI4		39
+#define DM365_LPSC_EMAC		40
+#define DM365_LPSC_VOICE_CODEC	44
+#define DM365_LPSC_DAC_CLK	46
+#define DM365_LPSC_VPSSMSTR	47
+#define DM365_LPSC_MJCP		50
+
 /*
  * LPSC Assignments
  */
@@ -118,6 +136,50 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
+/* PSC0 defines */
+#define DA8XX_LPSC0_TPCC		0
+#define DA8XX_LPSC0_TPTC0		1
+#define DA8XX_LPSC0_TPTC1		2
+#define DA8XX_LPSC0_EMIF25		3
+#define DA8XX_LPSC0_SPI0		4
+#define DA8XX_LPSC0_MMC_SD		5
+#define DA8XX_LPSC0_AINTC		6
+#define DA8XX_LPSC0_ARM_RAM_ROM		7
+#define DA8XX_LPSC0_SECU_MGR		8
+#define DA8XX_LPSC0_UART0		9
+#define DA8XX_LPSC0_SCR0_SS		10
+#define DA8XX_LPSC0_SCR1_SS		11
+#define DA8XX_LPSC0_SCR2_SS		12
+#define DA8XX_LPSC0_DMAX		13
+#define DA8XX_LPSC0_ARM			14
+#define DA8XX_LPSC0_GEM			15
+
+/* PSC1 defines */
+#define DA850_LPSC1_TPCC1		0
+#define DA8XX_LPSC1_USB20		1
+#define DA8XX_LPSC1_USB11		2
+#define DA8XX_LPSC1_GPIO		3
+#define DA8XX_LPSC1_UHPI		4
+#define DA8XX_LPSC1_CPGMAC		5
+#define DA8XX_LPSC1_EMIF3C		6
+#define DA8XX_LPSC1_McASP0		7
+#define DA830_LPSC1_McASP1		8
+#define DA850_LPSC1_SATA		8
+#define DA830_LPSC1_McASP2		9
+#define DA8XX_LPSC1_SPI1		10
+#define DA8XX_LPSC1_I2C			11
+#define DA8XX_LPSC1_UART1		12
+#define DA8XX_LPSC1_UART2		13
+#define DA8XX_LPSC1_LCDC		16
+#define DA8XX_LPSC1_PWM			17
+#define DA8XX_LPSC1_ECAP		20
+#define DA830_LPSC1_EQEP		21
+#define DA850_LPSC1_TPTC2		21
+#define DA8XX_LPSC1_SCR_P0_SS		24
+#define DA8XX_LPSC1_SCR_P1_SS		25
+#define DA8XX_LPSC1_CR_P3_SS		26
+#define DA8XX_LPSC1_L3_CBA_RAM		31
+
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, char enable);
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 794fa5cf93c1..a584697a9e70 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -11,13 +11,17 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 #define DAVINCI_MAX_NR_UARTS	3
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
+#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
+#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
+#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
+
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index b7e7036674fa..8e4f10fe1263 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -16,12 +16,12 @@
 
 extern void davinci_watchdog_reset(void);
 
-static void arch_idle(void)
+static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static void arch_reset(char mode, const char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	davinci_watchdog_reset();
 }
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 1e27475f9a23..33796b4db17f 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -21,8 +21,11 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	/* Add logic here for new platforms, using __macine_arch_type */
-	return (u32 *)DAVINCI_UART0_BASE;
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM ||
+		__machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM)
+		return (u32 *)DA8XX_UART2_BASE;
+	else
+		return (u32 *)DAVINCI_UART0_BASE;
 }
 
 /* PORT_16C550A, in polled non-fifo mode */
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
index ad51625b6609..d49646a8e206 100644
--- a/arch/arm/mach-davinci/include/mach/vmalloc.h
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -8,7 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
 #define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index d310f579aa85..898905e48946 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -91,3 +91,17 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 	return 0;
 }
 EXPORT_SYMBOL(davinci_cfg_reg);
+
+int da8xx_pinmux_setup(const short pins[])
+{
+	int i, error = -EINVAL;
+
+	if (pins)
+		for (i = 0; pins[i] >= 0; i++) {
+			error = davinci_cfg_reg(pins[i]);
+			if (error)
+				break;
+		}
+
+	return error;
+}
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index db54b2a66b4d..4f1fc9b318b3 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -60,7 +60,7 @@ static int __init sram_init(void)
 	int status = 0;
 
 	if (len) {
-		len = min(len, SRAM_SIZE);
+		len = min_t(unsigned, len, SRAM_SIZE);
 		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
 		if (!sram_pool)
 			status = -ENOMEM;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0884ca57bfb0..0d1b6d407b46 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -406,11 +406,11 @@ struct sys_timer davinci_timer = {
 void davinci_watchdog_reset(void)
 {
 	u32 tgcr, wdtcr;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	void __iomem *base = soc_info->wdt_base;
+	struct platform_device *pdev = &davinci_wdt_device;
+	void __iomem *base = IO_ADDRESS(pdev->resource[0].start);
 	struct clk *wd_clk;
 
-	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
+	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
@@ -420,11 +420,11 @@ void davinci_watchdog_reset(void)
 
 	/* reset timer, set mode to 64-bit watchdog, and unreset */
 	tgcr = 0;
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
 	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 
 	/* clear counter and period regs */
 	__raw_writel(0, base + TIM12);
@@ -432,12 +432,8 @@ void davinci_watchdog_reset(void)
 	__raw_writel(0, base + PRD12);
 	__raw_writel(0, base + PRD34);
 
-	/* enable */
-	wdtcr = __raw_readl(base + WDTCR);
-	wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
-	__raw_writel(wdtcr, base + WDTCR);
-
 	/* put watchdog in pre-active state */
+	wdtcr = __raw_readl(base + WDTCR);
 	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
 		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
 	__raw_writel(wdtcr, base + WDTCR);
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index abedb6337182..06f55931620c 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -13,6 +13,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
 
 #define DAVINCI_USB_OTG_BASE 0x01C64000
 
@@ -64,6 +65,10 @@ static struct resource usb_resources[] = {
 		.start          = IRQ_USBINT,
 		.flags          = IORESOURCE_IRQ,
 	},
+	{
+		/* placeholder for the dedicated CPPI IRQ */
+		.flags          = IORESOURCE_IRQ,
+	},
 };
 
 static u64 usb_dmamask = DMA_BIT_MASK(32);
@@ -84,6 +89,14 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 {
 	usb_data.power = mA / 2;
 	usb_data.potpgt = potpgt_msec / 2;
+
+	if (cpu_is_davinci_dm646x()) {
+		/* Override the defaults as DM6467 uses different IRQs. */
+		usb_dev.resource[1].start = IRQ_DM646X_USBINT;
+		usb_dev.resource[2].start = IRQ_DM646X_USBDMAINT;
+	} else	/* other devices don't have dedicated CPPI IRQ */
+		usb_dev.num_resources = 2;
+
 	platform_device_register(&usb_dev);
 }
 
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8b40aace9db4..42920f9c1a11 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -15,8 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/serial_8250.h>
 
+#include <asm/serial.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -162,10 +165,6 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config ams_delta_uart_config __initdata = {
-	.enabled_uarts = 1,
-};
-
 static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.register_host	= 1,
 	.hmc_mode	= 16,
@@ -174,7 +173,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
-	{ OMAP_TAG_UART,	&ams_delta_uart_config },
 };
 
 static struct resource ams_delta_kp_resources[] = {
@@ -235,6 +233,41 @@ static void __init ams_delta_init(void)
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 }
 
+static struct plat_serial8250_port ams_delta_modem_ports[] = {
+	{
+		.membase	= (void *) AMS_DELTA_MODEM_VIRT,
+		.mapbase	= AMS_DELTA_MODEM_PHYS,
+		.irq		= -EINVAL, /* changed later */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= BASE_BAUD * 16,
+	},
+	{ },
+};
+
+static struct platform_device ams_delta_modem_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data = ams_delta_modem_ports,
+	},
+};
+
+static int __init ams_delta_modem_init(void)
+{
+	omap_cfg_reg(M14_1510_GPIO2);
+	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+
+	ams_delta_latch2_write(
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
+
+	return platform_device_register(&ams_delta_modem_device);
+}
+arch_initcall(ams_delta_modem_init);
+
 static void __init ams_delta_map_io(void)
 {
 	omap1_map_common_io();
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 19e0e9232336..a7ead1b93226 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -240,16 +240,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config fsample_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config fsample_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel fsample_config[] = {
-	{ OMAP_TAG_UART,	&fsample_uart_config },
 	{ OMAP_TAG_LCD,		&fsample_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e724940e86f2..fb47239da72f 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -57,12 +57,7 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 };
 #endif
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f695aa053ac8..aab860307dca 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -360,16 +360,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f597968733b4..89586b80b8d5 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -313,16 +313,11 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h3_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h3_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2fd98260ea49..cc2abbb2d0f4 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -368,13 +368,8 @@ static inline void innovator_mmc_init(void)
 }
 #endif
 
-static struct omap_uart_config innovator_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_LCD,		NULL },
-	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
 static void __init innovator_init(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index cf3247b15f87..ed891b8a6b15 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -293,10 +293,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_uart_config osk_uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 static struct omap_lcd_config osk_lcd_config __initdata = {
 	.ctrl_name	= "internal",
@@ -304,7 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #endif
 
 static struct omap_board_config_kernel osk_config[] __initdata = {
-	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
 #endif
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 886b4c0569bd..90dd0431b0dc 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -212,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmte_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
@@ -302,7 +298,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
-	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
 
 static struct spi_board_info palmte_spi_info[] __initdata = {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 4f1b44831d37..8256139891ff 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -274,13 +274,8 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmtt_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmtt_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
-	{ OMAP_TAG_UART,	&palmtt_uart_config	},
 };
 
 static void __init omap_mpu_wdt_mode(int mode) {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9a55c3c58218..81b6bde1c5a3 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -244,13 +244,8 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
 	.ctrl_name = "internal",
 };
 
-static struct omap_uart_config palmz71_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
-	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
 
 static irqreturn_t
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 3b9f907aa899..83406699f310 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -208,16 +208,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config perseus2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel perseus2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&perseus2_uart_config },
 	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index c096577695fe..02c85ca2e1df 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -369,13 +369,8 @@ static struct platform_device *sx1_devices[] __initdata = {
 };
 /*-----------------------------------------*/
 
-static struct omap_uart_config sx1_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel sx1_config[] __initdata = {
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
-	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
 
 /*-----------------------------------------*/
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 98275e03dad1..c06e7a553472 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -140,12 +140,7 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };
 
-static struct omap_uart_config voiceblue_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel voiceblue_config[] = {
-	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
 static void __init voiceblue_init_irq(void)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index bbbaeb0abcd3..06808434ea04 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
 
 static struct resource mbox_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 3afe540149f7..7030f9281ea1 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -29,9 +29,9 @@ extern void omapfb_reserve_sdram(void);
  */
 static struct map_desc omap_io_desc[] __initdata = {
 	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
 	}
 };
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index 9ed5e2c1de4d..c4f05bdcf8a6 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE		IO_ADDRESS(0xfffece00)
+#define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET		0x04
 #define ARM_IDLECT2_ASM_OFFSET		0x08
 
-#define TCMIF_ASM_BASE			IO_ADDRESS(0xfffecc00)
+#define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET		0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index f754cee4f3c3..d496e50fec40 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -109,7 +109,6 @@ static struct platform_device serial_device = {
 void __init omap_serial_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 
 	if (cpu_is_omap730()) {
 		serial_platform_data[0].regshift = 0;
@@ -131,19 +130,9 @@ void __init omap_serial_init(void)
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		unsigned char reg;
 
-		if (!((1 << i) & info->enabled_uarts)) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 261cdc48228b..7724e520d07c 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -21,13 +21,13 @@
 ENTRY(omap1_sram_reprogram_clock)
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
 
-	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+	mov	r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
 
-	mov	r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+	mov	r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
 
 	tst	r0, #1 << 4			@ want lock mode?
 	beq	newck				@ nope
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d56408d3cff..1be6a214d88d 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -62,8 +62,8 @@ typedef struct {
 	u32 read_tim;			/* READ_TIM,   R */
 } omap_mpu_timer_regs_t;
 
-#define omap_mpu_timer_base(n)						\
-((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+#define omap_mpu_timer_base(n)							\
+((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long omap_mpu_timer_read(int nr)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a755eb5e2361..75b1c7efae7e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -31,6 +31,11 @@ config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_OMAP2_TUSB6010
+	bool
+	depends on ARCH_OMAP2 && ARCH_OMAP2420
+	default y if MACH_NOKIA_N8X0
+
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
@@ -68,6 +73,10 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N8X0
+	bool "Nokia N800/N810"
+	depends on ARCH_OMAP2420
+
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 735bae5b0dec..8cb16777661a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
 prcm-common				= prcm.o powerdomain.o
 clock-common				= clock.o clockdomain.o
 
@@ -35,6 +35,11 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
+# PRCM
+obj-$(CONFIG_ARCH_OMAP2)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
+
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
@@ -62,7 +67,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
-
+obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
@@ -74,6 +79,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
 obj-y					+= usb-musb.o
+obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8ec2a132904d..42217b32f835 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -139,23 +139,19 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static struct omap_board_config_kernel sdp2430_config[] = {
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
+};
+
 static void __init omap_2430sdp_init_irq(void)
 {
+	omap_board_config = sdp2430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct omap_uart_config sdp2430_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
-static struct omap_board_config_kernel sdp2430_config[] = {
-	{OMAP_TAG_UART, &sdp2430_uart_config},
-	{OMAP_TAG_LCD, &sdp2430_lcd_config},
-};
-
-
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -205,8 +201,6 @@ static void __init omap_2430sdp_init(void)
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
-	omap_board_config = sdp2430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ac262cd74503..bd57ec76dc5e 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -167,26 +167,23 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 	&sdp3430_lcd_device,
 };
 
-static void __init omap_3430sdp_init_irq(void)
-{
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
-static struct omap_uart_config sdp3430_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp3430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
+static void __init omap_3430sdp_init_irq(void)
+{
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static int sdp3430_batt_table[] = {
 /* 0 C*/
 30800, 29500, 28300, 27100,
@@ -478,12 +475,15 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
@@ -495,6 +495,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	enable_board_wakeup_source();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 1b223076ceb7..eb37c40ea83a 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -47,14 +47,13 @@ static struct omap_lcd_config sdp4430_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel sdp4430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp4430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 }
 
 static void __init omap_4430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index dcfc20d03894..7a2b54c7291a 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -248,18 +248,6 @@ out:
 	clk_put(gpmc_fck);
 }
 
-static void __init omap_apollon_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
-}
-
-static struct omap_uart_config apollon_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
-};
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -272,10 +260,19 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel apollon_config[] = {
-	{ OMAP_TAG_UART,	&apollon_uart_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
+static void __init omap_apollon_init_irq(void)
+{
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	apollon_init_smc91x();
+}
+
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
@@ -324,8 +321,6 @@ static void __init omap_apollon_init(void)
 	 * if not needed.
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fd00aa03690c..2e09a1c444cb 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -31,24 +31,19 @@
 #include <mach/board.h>
 #include <mach/common.h>
 
+static struct omap_board_config_kernel generic_config[] = {
+};
+
 static void __init omap_generic_init_irq(void)
 {
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
-static struct omap_board_config_kernel generic_config[] = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
-};
-
 static void __init omap_generic_init(void)
 {
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 7b1d61d5bb2c..eaa02d012c5c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -268,18 +268,6 @@ static void __init h4_init_flash(void)
 	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
-static void __init omap_h4_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	h4_init_flash();
-}
-
-static struct omap_uart_config h4_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -318,10 +306,19 @@ static struct omap_usb_config h4_usb_config __initdata = {
 };
 
 static struct omap_board_config_kernel h4_config[] = {
-	{ OMAP_TAG_UART,	&h4_uart_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
+static void __init omap_h4_init_irq(void)
+{
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_flash();
+}
+
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -366,8 +363,6 @@ static void __init omap_h4_init(void)
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_board_config = h4_config;
-	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ea383f88cb1b..ec6854cbdd9f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -268,18 +268,6 @@ static inline void __init ldp_init_smsc911x(void)
 	gpio_direction_input(eth_gpio);
 }
 
-static void __init omap_ldp_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	ldp_init_smsc911x();
-}
-
-static struct omap_uart_config ldp_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct platform_device ldp_lcd_device = {
 	.name		= "ldp_lcd",
 	.id		= -1,
@@ -290,10 +278,19 @@ static struct omap_lcd_config ldp_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel ldp_config[] __initdata = {
-	{ OMAP_TAG_UART,	&ldp_uart_config },
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
+static void __init omap_ldp_init_irq(void)
+{
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	ldp_init_smsc911x();
+}
+
 static struct twl4030_usb_data ldp_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -377,8 +374,6 @@ static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_board_config = ldp_config;
-	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	ts_gpio = 54;
 	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 	spi_register_board_info(ldp_spi_board_info,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
new file mode 100644
index 000000000000..8341632d260b
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -0,0 +1,150 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c
+ *
+ * Copyright (C) 2005-2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/stddef.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/musb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/mcspi.h>
+#include <mach/onenand.h>
+#include <mach/serial.h>
+
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel = 1,
+};
+
+static struct spi_board_info n800_spi_board_info[] __initdata = {
+	{
+		.modalias	= "p54spi",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.max_speed_hz   = 48000000,
+		.controller_data = &p54spi_mcspi_config,
+	},
+};
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x400000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 26,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READ,
+};
+
+static void __init n8x0_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static void __init n8x0_onenand_init(void) {}
+
+#endif
+
+static void __init n8x0_map_io(void)
+{
+	omap2_set_globals_242x();
+	omap2_map_common_io();
+}
+
+static void __init n8x0_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init n8x0_init_machine(void)
+{
+	/* FIXME: add n810 spi devices */
+	spi_register_board_info(n800_spi_board_info,
+				ARRAY_SIZE(n800_spi_board_info));
+
+	omap_serial_init();
+	n8x0_onenand_init();
+}
+
+MACHINE_START(NOKIA_N800, "Nokia N800")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810, "Nokia N810")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index e00ba128cece..500c9956876d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -108,10 +108,6 @@ static struct platform_device omap3beagle_nand_device = {
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct omap_uart_config omap3_beagle_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -249,11 +245,16 @@ static struct regulator_init_data beagle_vpll2 = {
 	.consumer_supplies	= &beagle_vdvi_supply,
 };
 
+static struct twl4030_usb_data beagle_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
@@ -280,17 +281,6 @@ static int __init omap3_beagle_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3_beagle_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
-	omap_gpio_init();
-}
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
@@ -345,10 +335,22 @@ static struct platform_device keys_gpio = {
 };
 
 static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
 	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
 };
 
+static void __init omap3_beagle_init_irq(void)
+{
+	omap_board_config = omap3_beagle_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&omap3_beagle_lcd_device,
 	&leds_gpio,
@@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void)
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
-	omap_board_config = omap3_beagle_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
 
 	omap_cfg_reg(J25_34XX_GPIO170);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c4b144647dc5..d50b9be90580 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -92,10 +92,6 @@ static inline void __init omap3evm_init_smc911x(void)
 	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
 }
 
-static struct omap_uart_config omap3_evm_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -278,19 +274,20 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 	},
 };
 
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
 static void __init omap3_evm_init_irq(void)
 {
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
-};
-
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
 	&omap3evm_smc911x_device,
@@ -301,8 +298,6 @@ static void __init omap3_evm_init(void)
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 
 	spi_register_board_info(omap3evm_spi_board_info,
 				ARRAY_SIZE(omap3evm_spi_board_info));
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 864ee3d021f7..b43f6e36b6d9 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -213,10 +213,6 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct omap_uart_config omap3pandora_uart_config __initdata = {
-	.enabled_uarts	= (1 << 2), /* UART3 */
-};
-
 static struct regulator_consumer_supply pandora_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -309,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3pandora_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static void __init omap3pandora_ads7846_init(void)
 {
 	int gpio = OMAP3_PANDORA_TS_GPIO;
@@ -376,10 +364,19 @@ static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3pandora_uart_config },
 	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
 };
 
+static void __init omap3pandora_init_irq(void)
+{
+	omap_board_config = omap3pandora_config;
+	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
 	&pandora_leds_gpio,
@@ -391,8 +388,6 @@ static void __init omap3pandora_init(void)
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
-	omap_board_config = omap3pandora_config;
-	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
 	omap_serial_init();
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 6bce23004aa4..9917d2fddc2f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -271,9 +271,6 @@ static void __init overo_flash_init(void)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
-static struct omap_uart_config overo_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
 
 static struct twl4030_hsmmc_info mmc[] = {
 	{
@@ -360,14 +357,6 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
-static void __init overo_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct platform_device overo_lcd_device = {
 	.name		= "overo_lcd",
 	.id		= -1,
@@ -378,10 +367,19 @@ static struct omap_lcd_config overo_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel overo_config[] __initdata = {
-	{ OMAP_TAG_UART,	&overo_uart_config },
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
+static void __init overo_init_irq(void)
+{
+	omap_board_config = overo_config;
+	omap_board_config_size = ARRAY_SIZE(overo_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
@@ -390,8 +388,6 @@ static void __init overo_init(void)
 {
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 56d931a425f7..e70baa799018 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
  *
  * Copyright (C) 2008-2009 Nokia
  *
@@ -282,7 +282,124 @@ static struct twl4030_usb_data rx51_usb_data = {
 	.usb_mode		= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_platform_data rx51_twldata = {
+static struct twl4030_ins sleep_on_seq[] __initdata = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+	.script = sleep_on_seq,
+	.size   = ARRAY_SIZE(sleep_on_seq),
+	.flags  = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+	.script	= wakeup_seq,
+	.size	= ARRAY_SIZE(wakeup_seq),
+	.flags	= TWL4030_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_p3_seq[] __initdata = {
+/*
+ * Wakeup VDD1 (dummy to be able to insert a delay)
+ * Enable CLKEN
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_p3_script __initdata = {
+	.script	= wakeup_p3_seq,
+	.size	= ARRAY_SIZE(wakeup_p3_seq),
+	.flags	= TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+		0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+	{MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script wrst_script __initdata = {
+	.script = wrst_seq,
+	.size   = ARRAY_SIZE(wrst_seq),
+	.flags  = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+	/* wakeup12 script should be loaded before sleep script, otherwise a
+	   board might hit retention before loading of wakeup script is
+	   completed. This can cause boot failures depending on timing issues.
+	*/
+	&wakeup_script,
+	&sleep_on_script,
+	&wakeup_p3_script,
+	&wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
+	{ .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
+		.type2 = 1 },
+	{ 0, 0},
+};
+
+static struct twl4030_power_data rx51_t2scripts_data __initdata = {
+	.scripts        = twl4030_scripts,
+	.num = ARRAY_SIZE(twl4030_scripts),
+	.resource_config = twl4030_rconfig,
+};
+
+
+
+static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
 
@@ -291,6 +408,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
 	.usb			= &rx51_usb_data,
+	.power			= &rx51_t2scripts_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1c9e07fe8266..f9196c3b1a7b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -31,10 +31,6 @@
 #include <mach/gpmc.h>
 #include <mach/usb.h>
 
-static struct omap_uart_config rx51_uart_config = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
 };
@@ -52,7 +48,6 @@ static struct omap_fbmem_config rx51_fbmem2_config = {
 };
 
 static struct omap_board_config_kernel rx51_config[] = {
-	{ OMAP_TAG_UART,	&rx51_uart_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem0_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem1_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem2_config },
@@ -61,6 +56,8 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -70,8 +67,6 @@ extern void __init rx51_peripherals_init(void);
 
 static void __init rx51_init(void)
 {
-	omap_board_config = rx51_config;
-	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index bac5c4321ff7..1f13e2a1f322 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -12,6 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smsc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/gpmc.h>
 
@@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.mapbase	= 0x10000000,
 		.irq		= OMAP_GPIO_IRQ(102),
 		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
 		.iotype		= UPIO_MEM,
 		.regshift	= 1,
 		.uartclk	= QUART_CLK,
@@ -94,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device zoom2_debugboard_serial_device = {
 	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
+	.id			= 3,
 	.dev			= {
 		.platform_data	= serial_platform_data,
 	},
@@ -127,6 +129,7 @@ static inline void __init zoom2_init_quaduart(void)
 static inline int omap_zoom2_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
+	int ret = 1;
 
 	debug_board_detect = ZOOM2_SMSC911X_GPIO;
 
@@ -138,10 +141,10 @@ static inline int omap_zoom2_debugboard_detect(void)
 	gpio_direction_input(debug_board_detect);
 
 	if (!gpio_get_value(debug_board_detect)) {
-		gpio_free(debug_board_detect);
-		return 0;
+		ret = 0;
 	}
-	return 1;
+	gpio_free(debug_board_detect);
+	return ret;
 }
 
 static struct platform_device *zoom2_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 427b7b8b1237..324009edbd53 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -12,36 +12,217 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
-static void __init omap_zoom2_init_irq(void)
+/* Zoom2 has Qwerty keyboard*/
+static int zoom2_twl4030_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(1, 0, KEY_R),
+	KEY(2, 0, KEY_T),
+	KEY(3, 0, KEY_HOME),
+	KEY(6, 0, KEY_I),
+	KEY(7, 0, KEY_LEFTSHIFT),
+	KEY(0, 1, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(2, 1, KEY_G),
+	KEY(3, 1, KEY_SEND),
+	KEY(6, 1, KEY_K),
+	KEY(7, 1, KEY_ENTER),
+	KEY(0, 2, KEY_X),
+	KEY(1, 2, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(3, 2, KEY_END),
+	KEY(6, 2, KEY_DOT),
+	KEY(7, 2, KEY_CAPSLOCK),
+	KEY(0, 3, KEY_Z),
+	KEY(1, 3, KEY_KPPLUS),
+	KEY(2, 3, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(6, 3, KEY_O),
+	KEY(7, 3, KEY_SPACE),
+	KEY(0, 4, KEY_W),
+	KEY(1, 4, KEY_Y),
+	KEY(2, 4, KEY_U),
+	KEY(3, 4, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(6, 4, KEY_L),
+	KEY(7, 4, KEY_LEFT),
+	KEY(0, 5, KEY_S),
+	KEY(1, 5, KEY_H),
+	KEY(2, 5, KEY_J),
+	KEY(3, 5, KEY_F3),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(6, 5, KEY_M),
+	KEY(4, 5, KEY_ENTER),
+	KEY(7, 5, KEY_RIGHT),
+	KEY(0, 6, KEY_Q),
+	KEY(1, 6, KEY_A),
+	KEY(2, 6, KEY_N),
+	KEY(3, 6, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(7, 6, KEY_UP),
+	KEY(6, 7, KEY_SELECT),
+	KEY(7, 7, KEY_DOWN),
+	KEY(0, 7, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(1, 7, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(2, 7, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(3, 7, KEY_PROG4),	/*MACRO 4 <User defined> */
+	0
+};
+
+static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap		= zoom2_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+};
+
+static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom2_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom2_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
 {
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom2_vmmc1_supply.dev = mmc[0].dev;
+	zoom2_vsim_supply.dev = mmc[0].dev;
+	zoom2_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
 }
 
-static struct omap_uart_config zoom2_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+
+static int zoom2_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
 };
 
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&zoom2_uart_config },
+static struct twl4030_bci_platform_data zoom2_bci_data = {
+	.battery_tmp_tbl	= zoom2_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
 };
 
+static struct twl4030_usb_data zoom2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom2_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom2_madc_data = {
+	.irq_line	= 1,
 };
 
 static struct twl4030_platform_data zoom2_twldata = {
@@ -49,7 +230,15 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.bci		= &zoom2_bci_data,
+	.madc		= &zoom2_madc_data,
+	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
+	.keypad		= &zoom2_kp_twl4030_data,
+	.vmmc1          = &zoom2_vmmc1,
+	.vmmc2          = &zoom2_vmmc2,
+	.vsim           = &zoom2_vsim,
+
 };
 
 static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
@@ -70,26 +259,13 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
 extern int __init omap_zoom2_debugboard_init(void);
 
 static void __init omap_zoom2_init(void)
 {
 	omap_i2c_init();
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
 }
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 456e2ad5f621..f2a92d614f0f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -1043,5 +1043,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 		omap2_clk_disable(clk);
 	} else
 		_omap2_clk_disable(clk);
+	if (clk->clkdm != NULL)
+		pwrdm_clkdm_state_switch(clk->clkdm);
 }
 #endif
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index cd7819cc0c9e..fafcd32e6907 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -27,6 +27,7 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
+#include <mach/cpu.h>
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
@@ -1067,17 +1068,17 @@ static int __init omap2_clk_arch_init(void)
 		return -EINVAL;
 
 	/* REVISIT: not yet ready for 343x */
-#if 0
-	if (clk_set_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-#endif
+	if (clk_set_rate(&dpll1_ck, mpurate))
+		printk(KERN_ERR "*** Unable to set MPU rate\n");
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
+	       (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
+
+	calibrate_delay();
 
 	return 0;
 }
@@ -1136,7 +1137,7 @@ int __init omap2_clk_init(void)
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
+	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
 	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
 	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 57cc2725b923..c8119781e00a 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1020,6 +1020,7 @@ static struct clk arm_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
+	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1155,7 +1156,6 @@ static struct clk gfx_cg1_ck = {
 	.name		= "gfx_cg1_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1166,7 +1166,6 @@ static struct clk gfx_cg2_ck = {
 	.name		= "gfx_cg2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1210,7 +1209,6 @@ static struct clk sgx_ick = {
 	.name		= "sgx_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
 	.clkdm_name	= "sgx_clkdm",
@@ -1223,7 +1221,6 @@ static struct clk d2d_26m_fck = {
 	.name		= "d2d_26m_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1234,7 +1231,6 @@ static struct clk modem_fck = {
 	.name		= "modem_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1622,7 +1618,6 @@ static struct clk core_l3_ick = {
 	.name		= "core_l3_ick",
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1691,7 +1686,6 @@ static struct clk core_l4_ick = {
 	.name		= "core_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2089,7 +2083,6 @@ static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_54m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2100,7 +2093,6 @@ static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2111,7 +2103,6 @@ static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2123,7 +2114,6 @@ static struct clk dss_ick_3430es1 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2135,7 +2125,6 @@ static struct clk dss_ick_3430es2 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2159,7 +2148,6 @@ static struct clk cam_ick = {
 	.name		= "cam_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2170,7 +2158,6 @@ static struct clk csi2_96m_fck = {
 	.name		= "csi2_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2183,7 +2170,6 @@ static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll5_m2_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2194,7 +2180,6 @@ static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2206,7 +2191,6 @@ static struct clk usbhost_ick = {
 	.name		= "usbhost_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2268,7 +2252,6 @@ static struct clk gpt1_fck = {
 static struct clk wkup_32k_fck = {
 	.name		= "wkup_32k_fck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
@@ -2383,7 +2366,6 @@ static struct clk per_96m_fck = {
 	.name		= "per_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2392,7 +2374,6 @@ static struct clk per_48m_fck = {
 	.name		= "per_48m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 0e7d501865b6..4ef7b4f5474e 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -299,7 +299,8 @@ struct clockdomain *clkdm_lookup(const char *name)
  * anything else to indicate failure; or -EINVAL if the function pointer
  * is null.
  */
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
+			void *user)
 {
 	struct clockdomain *clkdm;
 	int ret = 0;
@@ -309,7 +310,7 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
 
 	mutex_lock(&clkdm_mutex);
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		ret = (*fn)(clkdm);
+		ret = (*fn)(clkdm, user);
 		if (ret)
 			break;
 	}
@@ -484,6 +485,8 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 			    v << __ffs(clkdm->clktrctrl_mask),
 			    clkdm->pwrdm.ptr->prcm_offs,
 			    CM_CLKSTCTRL);
+
+	pwrdm_clkdm_state_switch(clkdm);
 }
 
 /**
@@ -572,6 +575,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 		omap2_clkdm_wakeup(clkdm);
 
 	pwrdm_wait_transition(clkdm->pwrdm.ptr);
+	pwrdm_clkdm_state_switch(clkdm);
 
 	return 0;
 }
@@ -624,6 +628,8 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	else
 		omap2_clkdm_sleep(clkdm);
 
+	pwrdm_clkdm_state_switch(clkdm);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
new file mode 100644
index 000000000000..8eb2dab8c7db
--- /dev/null
+++ b/arch/arm/mach-omap2/cm.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP2/3 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME		20000
+
+static const u8 cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+};
+
+/**
+ * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * XXX document
+ */
+int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	int ena = 0, i = 0;
+	u8 cm_idlest_reg;
+	u32 mask;
+
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+		return -EINVAL;
+
+	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+
+	if (cpu_is_omap24xx())
+		ena = idlest_shift;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	mask = 1 << idlest_shift;
+
+	/* XXX should be OMAP2 CM */
+	while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index f3c91a1ca391..cfd0b726ba44 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global CM registers
@@ -98,6 +98,10 @@ extern u32 cm_read_mod_reg(s16 module, u16 idx);
 extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
 extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
+extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+				      u8 idlest_shift);
+extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
+
 static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
 	return cm_rmw_mod_reg_bits(bits, bits, module, idx);
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
new file mode 100644
index 000000000000..e4ebd6d53135
--- /dev/null
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -0,0 +1,68 @@
+/*
+ * OMAP4 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-4xxx.h"
+
+/* XXX move this to cm.h */
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME			20000
+
+/*
+ * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
+ * CM_CLKCTRL register.
+ */
+#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK	(0x2 << 16)
+
+/*
+ * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
+ * the PRCM module offset address (from the CM module base) in bits 15-0.
+ */
+#define OMAP4_PRCM_MOD_CM_ID_SHIFT		16
+#define OMAP4_PRCM_MOD_OFFS_MASK		0xffff
+
+/**
+ * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset (XXX example)
+ * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
+ *
+ * XXX document
+ */
+int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
+{
+	int i = 0;
+	u8 cm_id;
+	u16 prcm_mod_offs;
+	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
+
+	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
+	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
+
+	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
+				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 894cc355818a..a2e915639b72 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -513,6 +513,47 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 		}
 	}
+
+	if (cpu_is_omap3430()) {
+		if (controller_nr == 0) {
+			omap_cfg_reg(N28_3430_MMC1_CLK);
+			omap_cfg_reg(M27_3430_MMC1_CMD);
+			omap_cfg_reg(N27_3430_MMC1_DAT0);
+			if (mmc_controller->slots[0].wires == 4 ||
+				mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(N26_3430_MMC1_DAT1);
+				omap_cfg_reg(N25_3430_MMC1_DAT2);
+				omap_cfg_reg(P28_3430_MMC1_DAT3);
+			}
+			if (mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(P27_3430_MMC1_DAT4);
+				omap_cfg_reg(P26_3430_MMC1_DAT5);
+				omap_cfg_reg(R27_3430_MMC1_DAT6);
+				omap_cfg_reg(R25_3430_MMC1_DAT7);
+			}
+		}
+		if (controller_nr == 1) {
+			/* MMC2 */
+			omap_cfg_reg(AE2_3430_MMC2_CLK);
+			omap_cfg_reg(AG5_3430_MMC2_CMD);
+			omap_cfg_reg(AH5_3430_MMC2_DAT0);
+
+			/*
+			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
+			 * in the board-*.c files
+			 */
+			if (mmc_controller->slots[0].wires == 4 ||
+				mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(AH4_3430_MMC2_DAT1);
+				omap_cfg_reg(AG4_3430_MMC2_DAT2);
+				omap_cfg_reg(AF4_3430_MMC2_DAT3);
+			}
+		}
+
+		/*
+		 * For MMC3 the pins need to be muxed in the board-*.c files
+		 */
+	}
 }
 
 void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e9b9bcb19b4e..7574b6f20e8e 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -32,17 +32,23 @@
 #include <mach/sram.h>
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
+#include <mach/serial.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
+#include <mach/omap-pm.h>
 #include <mach/powerdomain.h>
-
 #include "powerdomains.h"
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
 #endif
+#include <mach/omap_hwmod.h>
+#include "omap_hwmod_2420.h"
+#include "omap_hwmod_2430.h"
+#include "omap_hwmod_34xx.h"
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -279,11 +285,26 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
+	struct omap_hwmod **hwmods = NULL;
+
+	if (cpu_is_omap2420())
+		hwmods = omap2420_hwmods;
+	else if (cpu_is_omap2430())
+		hwmods = omap2430_hwmods;
+	else if (cpu_is_omap34xx())
+		hwmods = omap34xx_hwmods;
+
+	omap_hwmod_init(hwmods);
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
+	/* The OPP tables have to be registered before a clk init */
+	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+	omap_serial_early_init();
+	omap_hwmod_late_init();
+	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
 #endif
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 015f22a53ead..2d9b5cc981cd 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -217,10 +217,19 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
 }
 
 #define pr_reg(name)							\
-	p += sprintf(p, "%20s: %08x\n",					\
-		     __stringify(name), iommu_read_reg(obj, MMU_##name));
-
-static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+	do {								\
+		ssize_t bytes;						\
+		const char *str = "%20s: %08x\n";			\
+		const int maxcol = 32;					\
+		bytes = snprintf(p, maxcol, str, __stringify(name),	\
+				 iommu_read_reg(obj, MMU_##name));	\
+		p += bytes;						\
+		len -= bytes;						\
+		if (len < maxcol)					\
+			goto out;					\
+	} while (0)
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
 {
 	char *p = buf;
 
@@ -242,7 +251,7 @@ static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
 	pr_reg(READ_CAM);
 	pr_reg(READ_RAM);
 	pr_reg(EMU_FAULT_AD);
-
+out:
 	return p - buf;
 }
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 43d6b92b65f2..2daa595aaff4 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -492,6 +492,61 @@ MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+
+/* MMC1 */
+MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC2 */
+MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC3 */
+MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* SYS_NIRQ T2 INT1 */
+MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
+		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
+		OMAP34XX_MUX_MODE0)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8fe8d230f21b..48ee295db275 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * for us: do so
 	 */
 
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 
 	/*
 	 * Synchronise with the boot thread.
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
new file mode 100644
index 000000000000..d2e0f1c95961
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -0,0 +1,1554 @@
+/*
+ * omap_hwmod implementation for OMAP2/3/4
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ * With fixes and testing from Kevin Hilman
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code manages "OMAP modules" (on-chip devices) and their
+ * integration with Linux device driver and bus code.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - pin mux handling
+ * - handle IO mapping
+ * - bus throughput & module latency measurement code
+ *
+ * XXX add tests at the beginning of each function to ensure the hwmod is
+ * in the appropriate state
+ * XXX error return values should be checked to ensure that they are
+ * appropriate
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/bootmem.h>
+
+#include <mach/cpu.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/clock.h>
+#include <mach/omap_hwmod.h>
+
+#include "cm.h"
+
+/* Maximum microseconds to wait for OMAP module to reset */
+#define MAX_MODULE_RESET_WAIT		10000
+
+/* Name of the OMAP hwmod for the MPU */
+#define MPU_INITIATOR_NAME		"mpu_hwmod"
+
+/* omap_hwmod_list contains all registered struct omap_hwmods */
+static LIST_HEAD(omap_hwmod_list);
+
+static DEFINE_MUTEX(omap_hwmod_mutex);
+
+/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
+static struct omap_hwmod *mpu_oh;
+
+/* inited: 0 if omap_hwmod_init() has not yet been called; 1 otherwise */
+static u8 inited;
+
+
+/* Private functions */
+
+/**
+ * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
+ * @oh: struct omap_hwmod *
+ *
+ * Load the current value of the hwmod OCP_SYSCONFIG register into the
+ * struct omap_hwmod for later use.  Returns -EINVAL if the hwmod has no
+ * OCP_SYSCONFIG register or 0 upon success.
+ */
+static int _update_sysc_cache(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig) {
+		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot read "
+		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+		return -EINVAL;
+	}
+
+	/* XXX ensure module interface clock is up */
+
+	oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+
+	oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+
+	return 0;
+}
+
+/**
+ * _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
+ * @v: OCP_SYSCONFIG value to write
+ * @oh: struct omap_hwmod *
+ *
+ * Write @v into the module OCP_SYSCONFIG register, if it has one.  No
+ * return value.
+ */
+static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig) {
+		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot write "
+		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+		return;
+	}
+
+	/* XXX ensure module interface clock is up */
+
+	if (oh->_sysc_cache != v) {
+		oh->_sysc_cache = v;
+		omap_hwmod_writel(v, oh, oh->sysconfig->sysc_offs);
+	}
+}
+
+/**
+ * _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
+ * @oh: struct omap_hwmod *
+ * @standbymode: MIDLEMODE field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the master standby mode bits in @v to be @standbymode for
+ * the @oh hwmod.  Does not write to the hardware.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
+				   u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE))
+		return -EINVAL;
+
+	*v &= ~SYSC_MIDLEMODE_MASK;
+	*v |= __ffs(standbymode) << SYSC_MIDLEMODE_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
+ * @oh: struct omap_hwmod *
+ * @idlemode: SIDLEMODE field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the slave idle mode bits in @v to be @idlemode for the @oh
+ * hwmod.  Does not write to the hardware.  Returns -EINVAL upon error
+ * or 0 upon success.
+ */
+static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE))
+		return -EINVAL;
+
+	*v &= ~SYSC_SIDLEMODE_MASK;
+	*v |= __ffs(idlemode) << SYSC_SIDLEMODE_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * @oh: struct omap_hwmod *
+ * @clockact: CLOCKACTIVITY field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the clockactivity mode bits in @v to be @clockact for the
+ * @oh hwmod.  Used for additional powersaving on some modules.  Does
+ * not write to the hardware.  Returns -EINVAL upon error or 0 upon
+ * success.
+ */
+static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+		return -EINVAL;
+
+	*v &= ~SYSC_CLOCKACTIVITY_MASK;
+	*v |= clockact << SYSC_CLOCKACTIVITY_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Set the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_softreset(struct omap_hwmod *oh, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET))
+		return -EINVAL;
+
+	*v |= SYSC_SOFTRESET_MASK;
+
+	return 0;
+}
+
+/**
+ * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
+ * @oh: struct omap_hwmod *
+ *
+ * Allow the hardware module @oh to send wakeups.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _enable_wakeup(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	v = oh->_sysc_cache;
+	v |= SYSC_ENAWAKEUP_MASK;
+	_write_sysconfig(v, oh);
+
+	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
+
+	oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
+
+	return 0;
+}
+
+/**
+ * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
+ * @oh: struct omap_hwmod *
+ *
+ * Prevent the hardware module @oh to send wakeups.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _disable_wakeup(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	v = oh->_sysc_cache;
+	v &= ~SYSC_ENAWAKEUP_MASK;
+	_write_sysconfig(v, oh);
+
+	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
+
+	oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
+
+	return 0;
+}
+
+/**
+ * _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
+ * @oh: struct omap_hwmod *
+ *
+ * Prevent the hardware module @oh from entering idle while the
+ * hardare module initiator @init_oh is active.  Useful when a module
+ * will be accessed by a particular initiator (e.g., if a module will
+ * be accessed by the IVA, there should be a sleepdep between the IVA
+ * initiator and the module).  Only applies to modules in smart-idle
+ * mode.  Returns -EINVAL upon error or passes along
+ * pwrdm_add_sleepdep() value upon success.
+ */
+static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
+{
+	if (!oh->_clk)
+		return -EINVAL;
+
+	return pwrdm_add_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
+				  init_oh->_clk->clkdm->pwrdm.ptr);
+}
+
+/**
+ * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
+ * @oh: struct omap_hwmod *
+ *
+ * Allow the hardware module @oh to enter idle while the hardare
+ * module initiator @init_oh is active.  Useful when a module will not
+ * be accessed by a particular initiator (e.g., if a module will not
+ * be accessed by the IVA, there should be no sleepdep between the IVA
+ * initiator and the module).  Only applies to modules in smart-idle
+ * mode.  Returns -EINVAL upon error or passes along
+ * pwrdm_add_sleepdep() value upon success.
+ */
+static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
+{
+	if (!oh->_clk)
+		return -EINVAL;
+
+	return pwrdm_del_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
+				  init_oh->_clk->clkdm->pwrdm.ptr);
+}
+
+/**
+ * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh _clk (main
+ * functional clock pointer) if a main_clk is present.  Returns 0 on
+ * success or -EINVAL on error.
+ */
+static int _init_main_clk(struct omap_hwmod *oh)
+{
+	struct clk *c;
+	int ret = 0;
+
+	if (!oh->clkdev_con_id)
+		return 0;
+
+	c = clk_get_sys(oh->clkdev_dev_id, oh->clkdev_con_id);
+	WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s.%s\n",
+	     oh->name, oh->clkdev_dev_id, oh->clkdev_con_id);
+	if (IS_ERR(c))
+		ret = -EINVAL;
+	oh->_clk = c;
+
+	return ret;
+}
+
+/**
+ * _init_interface_clk - get a struct clk * for the the hwmod's interface clks
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh OCP slave interface
+ * clock pointers.  Returns 0 on success or -EINVAL on error.
+ */
+static int _init_interface_clks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct clk *c;
+	int i;
+	int ret = 0;
+
+	if (oh->slaves_cnt == 0)
+		return 0;
+
+	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		if (!os->clkdev_con_id)
+			continue;
+
+		c = clk_get_sys(os->clkdev_dev_id, os->clkdev_con_id);
+		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
+		     "interface_clk %s.%s\n", oh->name,
+		     os->clkdev_dev_id, os->clkdev_con_id);
+		if (IS_ERR(c))
+			ret = -EINVAL;
+		os->_clk = c;
+	}
+
+	return ret;
+}
+
+/**
+ * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh omap_hwmod_opt_clk
+ * clock pointers.  Returns 0 on success or -EINVAL on error.
+ */
+static int _init_opt_clks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	struct clk *c;
+	int i;
+	int ret = 0;
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
+		c = clk_get_sys(oc->clkdev_dev_id, oc->clkdev_con_id);
+		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
+		     "%s.%s\n", oh->name, oc->clkdev_dev_id,
+		     oc->clkdev_con_id);
+		if (IS_ERR(c))
+			ret = -EINVAL;
+		oc->_clk = c;
+	}
+
+	return ret;
+}
+
+/**
+ * _enable_clocks - enable hwmod main clock and interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Enables all clocks necessary for register reads and writes to succeed
+ * on the hwmod @oh.  Returns 0.
+ */
+static int _enable_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
+
+	if (oh->_clk && !IS_ERR(oh->_clk))
+		clk_enable(oh->_clk);
+
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+				clk_enable(c);
+		}
+	}
+
+	/* The opt clocks are controlled by the device driver. */
+
+	return 0;
+}
+
+/**
+ * _disable_clocks - disable hwmod main clock and interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Disables the hwmod @oh main functional and interface clocks.  Returns 0.
+ */
+static int _disable_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
+
+	if (oh->_clk && !IS_ERR(oh->_clk))
+		clk_disable(oh->_clk);
+
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+				clk_disable(c);
+		}
+	}
+
+	/* The opt clocks are controlled by the device driver. */
+
+	return 0;
+}
+
+/**
+ * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the array index of the OCP slave port that the MPU
+ * addresses the device on, or -EINVAL upon error or not found.
+ */
+static int _find_mpu_port_index(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+	int found = 0;
+
+	if (!oh || oh->slaves_cnt == 0)
+		return -EINVAL;
+
+	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		if (os->user & OCP_USER_MPU) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found)
+		pr_debug("omap_hwmod: %s: MPU OCP slave port ID  %d\n",
+			 oh->name, i);
+	else
+		pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
+			 oh->name);
+
+	return (found) ? i : -EINVAL;
+}
+
+/**
+ * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
+ * @oh: struct omap_hwmod *
+ *
+ * Return the virtual address of the base of the register target of
+ * device @oh, or NULL on error.
+ */
+static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct omap_hwmod_addr_space *mem;
+	int i;
+	int found = 0;
+
+	if (!oh || oh->slaves_cnt == 0)
+		return NULL;
+
+	os = *oh->slaves + index;
+
+	for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
+		if (mem->flags & ADDR_TYPE_RT) {
+			found = 1;
+			break;
+		}
+	}
+
+	/* XXX use ioremap() instead? */
+
+	if (found)
+		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
+			 oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
+	else
+		pr_debug("omap_hwmod: %s: no MPU register target found\n",
+			 oh->name);
+
+	return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
+}
+
+/**
+ * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * If module is marked as SWSUP_SIDLE, force the module out of slave
+ * idle; otherwise, configure it for smart-idle.  If module is marked
+ * as SWSUP_MSUSPEND, force the module out of master standby;
+ * otherwise, configure it for smart-standby.  No return value.
+ */
+static void _sysc_enable(struct omap_hwmod *oh)
+{
+	u8 idlemode;
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		_set_slave_idlemode(oh, idlemode, &v);
+	}
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
+			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		_set_master_standbymode(oh, idlemode, &v);
+	}
+
+	/* XXX OCP AUTOIDLE bit? */
+
+	if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
+	    oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
+		_set_clockactivity(oh, oh->sysconfig->clockact, &v);
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * If module is marked as SWSUP_SIDLE, force the module into slave
+ * idle; otherwise, configure it for smart-idle.  If module is marked
+ * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
+ * configure it for smart-standby.  No return value.
+ */
+static void _sysc_idle(struct omap_hwmod *oh)
+{
+	u8 idlemode;
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		_set_slave_idlemode(oh, idlemode, &v);
+	}
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
+			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		_set_master_standbymode(oh, idlemode, &v);
+	}
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * Force the module into slave idle and master suspend. No return
+ * value.
+ */
+static void _sysc_shutdown(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE)
+		_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
+		_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
+
+	/* XXX clear OCP AUTOIDLE bit? */
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _lookup - find an omap_hwmod by name
+ * @name: find an omap_hwmod by name
+ *
+ * Return a pointer to an omap_hwmod by name, or NULL if not found.
+ * Caller must hold omap_hwmod_mutex.
+ */
+static struct omap_hwmod *_lookup(const char *name)
+{
+	struct omap_hwmod *oh, *temp_oh;
+
+	oh = NULL;
+
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		if (!strcmp(name, temp_oh->name)) {
+			oh = temp_oh;
+			break;
+		}
+	}
+
+	return oh;
+}
+
+/**
+ * _init_clocks - clk_get() all clocks associated with this hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Called by omap_hwmod_late_init() (after omap2_clk_init()).
+ * Resolves all clock names embedded in the hwmod.  Must be called
+ * with omap_hwmod_mutex held.  Returns -EINVAL if the omap_hwmod
+ * has not yet been registered or if the clocks have already been
+ * initialized, 0 on success, or a non-zero error on failure.
+ */
+static int _init_clocks(struct omap_hwmod *oh)
+{
+	int ret = 0;
+
+	if (!oh || (oh->_state != _HWMOD_STATE_REGISTERED))
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
+
+	ret |= _init_main_clk(oh);
+	ret |= _init_interface_clks(oh);
+	ret |= _init_opt_clks(oh);
+
+	oh->_state = _HWMOD_STATE_CLKS_INITED;
+
+	return ret;
+}
+
+/**
+ * _wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm_wait_module_ready() function.
+ */
+static int _wait_target_ready(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return 0;
+
+	os = *oh->slaves + oh->_mpu_port_index;
+
+	if (!(os->flags & OCPIF_HAS_IDLEST))
+		return 0;
+
+	/* XXX check module SIDLEMODE */
+
+	/* XXX check clock enable states */
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+						 oh->prcm.omap2.idlest_reg_id,
+						 oh->prcm.omap2.idlest_idle_bit);
+#if 0
+	} else if (cpu_is_omap44xx()) {
+		ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs,
+						 oh->prcm.omap4.device_offs);
+#endif
+	} else {
+		BUG();
+	};
+
+	return ret;
+}
+
+/**
+ * _reset - reset an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
+ * enabled for this to work.  Must be called with omap_hwmod_mutex
+ * held.  Returns -EINVAL if the hwmod cannot be reset this way or if
+ * the hwmod is in the wrong state, -ETIMEDOUT if the module did not
+ * reset in time, or 0 upon success.
+ */
+static int _reset(struct omap_hwmod *oh)
+{
+	u32 r, v;
+	int c;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
+	    (oh->sysconfig->sysc_flags & SYSS_MISSING))
+		return -EINVAL;
+
+	/* clocks must be on for this operation */
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: reset can only be entered from "
+		     "enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
+
+	v = oh->_sysc_cache;
+	r = _set_softreset(oh, &v);
+	if (r)
+		return r;
+	_write_sysconfig(v, oh);
+
+	c = 0;
+	while (c < MAX_MODULE_RESET_WAIT &&
+	       !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
+		 SYSS_RESETDONE_MASK)) {
+		udelay(1);
+		c++;
+	}
+
+	if (c == MAX_MODULE_RESET_WAIT)
+		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
+		     oh->name, MAX_MODULE_RESET_WAIT);
+	else
+		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
+
+	/*
+	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
+	 * _wait_target_ready() or _reset()
+	 */
+
+	return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
+}
+
+/**
+ * _enable - enable an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
+ * register target.  Must be called with omap_hwmod_mutex held.
+ * Returns -EINVAL if the hwmod is in the wrong state or passes along
+ * the return value of _wait_target_ready().
+ */
+static int _enable(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (oh->_state != _HWMOD_STATE_INITIALIZED &&
+	    oh->_state != _HWMOD_STATE_IDLE &&
+	    oh->_state != _HWMOD_STATE_DISABLED) {
+		WARN(1, "omap_hwmod: %s: enabled state can only be entered "
+		     "from initialized, idle, or disabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
+
+	/* XXX mux balls */
+
+	_add_initiator_dep(oh, mpu_oh);
+	_enable_clocks(oh);
+
+	if (oh->sysconfig) {
+		if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+			_update_sysc_cache(oh);
+		_sysc_enable(oh);
+	}
+
+	r = _wait_target_ready(oh);
+	if (!r)
+		oh->_state = _HWMOD_STATE_ENABLED;
+
+	return r;
+}
+
+/**
+ * _idle - idle an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Idles an omap_hwmod @oh.  This should be called once the hwmod has
+ * no further work.  Returns -EINVAL if the hwmod is in the wrong
+ * state or returns 0.
+ */
+static int _idle(struct omap_hwmod *oh)
+{
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
+		     "enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: idling\n", oh->name);
+
+	if (oh->sysconfig)
+		_sysc_idle(oh);
+	_del_initiator_dep(oh, mpu_oh);
+	_disable_clocks(oh);
+
+	oh->_state = _HWMOD_STATE_IDLE;
+
+	return 0;
+}
+
+/**
+ * _shutdown - shutdown an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Shut down an omap_hwmod @oh.  This should be called when the driver
+ * used for the hwmod is removed or unloaded or if the driver is not
+ * used by the system.  Returns -EINVAL if the hwmod is in the wrong
+ * state or returns 0.
+ */
+static int _shutdown(struct omap_hwmod *oh)
+{
+	if (oh->_state != _HWMOD_STATE_IDLE &&
+	    oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: disabled state can only be entered "
+		     "from idle, or enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
+
+	if (oh->sysconfig)
+		_sysc_shutdown(oh);
+	_del_initiator_dep(oh, mpu_oh);
+	/* XXX what about the other system initiators here? DMA, tesla, d2d */
+	_disable_clocks(oh);
+	/* XXX Should this code also force-disable the optional clocks? */
+
+	/* XXX mux any associated balls to safe mode */
+
+	oh->_state = _HWMOD_STATE_DISABLED;
+
+	return 0;
+}
+
+/**
+ * _write_clockact_lock - set the module's clockactivity bits
+ * @oh: struct omap_hwmod *
+ * @clockact: CLOCKACTIVITY field bits
+ *
+ * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
+ * OCP_SYSCONFIG register.  Returns -EINVAL if the hwmod is in the
+ * wrong state or returns 0.
+ */
+static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	v = oh->_sysc_cache;
+	_set_clockactivity(oh, clockact, &v);
+	_write_sysconfig(v, oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+
+/**
+ * _setup - do initial configuration of omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
+ * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex
+ * held.  Returns -EINVAL if the hwmod is in the wrong state or returns
+ * 0.
+ */
+static int _setup(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	if (!oh)
+		return -EINVAL;
+
+	/* Set iclk autoidle mode */
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (!c || IS_ERR(c))
+				continue;
+
+			if (os->flags & OCPIF_SWSUP_IDLE) {
+				/* XXX omap_iclk_deny_idle(c); */
+			} else {
+				/* XXX omap_iclk_allow_idle(c); */
+				clk_enable(c);
+			}
+		}
+	}
+
+	oh->_state = _HWMOD_STATE_INITIALIZED;
+
+	_enable(oh);
+
+	if (!(oh->flags & HWMOD_INIT_NO_RESET))
+		_reset(oh);
+
+	/* XXX OCP AUTOIDLE bit? */
+	/* XXX OCP ENAWAKEUP bit? */
+
+	if (!(oh->flags & HWMOD_INIT_NO_IDLE))
+		_idle(oh);
+
+	return 0;
+}
+
+
+
+/* Public functions */
+
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
+{
+	return __raw_readl(oh->_rt_va + reg_offs);
+}
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
+{
+	__raw_writel(v, oh->_rt_va + reg_offs);
+}
+
+/**
+ * omap_hwmod_register - register a struct omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod already
+ * has been registered by the same name; -EINVAL if the omap_hwmod is in the
+ * wrong state, or 0 on success.
+ *
+ * XXX The data should be copied into bootmem, so the original data
+ * should be marked __initdata and freed after init.  This would allow
+ * unneeded omap_hwmods to be freed on multi-OMAP configurations.  Note
+ * that the copy process would be relatively complex due to the large number
+ * of substructures.
+ */
+int omap_hwmod_register(struct omap_hwmod *oh)
+{
+	int ret, ms_id;
+
+	if (!oh || (oh->_state != _HWMOD_STATE_UNKNOWN))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+
+	pr_debug("omap_hwmod: %s: registering\n", oh->name);
+
+	if (_lookup(oh->name)) {
+		ret = -EEXIST;
+		goto ohr_unlock;
+	}
+
+	ms_id = _find_mpu_port_index(oh);
+	if (!IS_ERR_VALUE(ms_id)) {
+		oh->_mpu_port_index = ms_id;
+		oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+	} else {
+		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
+	}
+
+	list_add_tail(&oh->node, &omap_hwmod_list);
+
+	oh->_state = _HWMOD_STATE_REGISTERED;
+
+	ret = 0;
+
+ohr_unlock:
+	mutex_unlock(&omap_hwmod_mutex);
+	return ret;
+}
+
+/**
+ * omap_hwmod_lookup - look up a registered omap_hwmod by name
+ * @name: name of the omap_hwmod to look up
+ *
+ * Given a @name of an omap_hwmod, return a pointer to the registered
+ * struct omap_hwmod *, or NULL upon error.
+ */
+struct omap_hwmod *omap_hwmod_lookup(const char *name)
+{
+	struct omap_hwmod *oh;
+
+	if (!name)
+		return NULL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	oh = _lookup(name);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return oh;
+}
+
+/**
+ * omap_hwmod_for_each - call function for each registered omap_hwmod
+ * @fn: pointer to a callback function
+ *
+ * Call @fn for each registered omap_hwmod, passing @data to each
+ * function.  @fn must return 0 for success or any other value for
+ * failure.  If @fn returns non-zero, the iteration across omap_hwmods
+ * will stop and the non-zero return value will be passed to the
+ * caller of omap_hwmod_for_each().  @fn is called with
+ * omap_hwmod_for_each() held.
+ */
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
+{
+	struct omap_hwmod *temp_oh;
+	int ret;
+
+	if (!fn)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		ret = (*fn)(temp_oh);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return ret;
+}
+
+
+/**
+ * omap_hwmod_init - init omap_hwmod code and register hwmods
+ * @ohs: pointer to an array of omap_hwmods to register
+ *
+ * Intended to be called early in boot before the clock framework is
+ * initialized.  If @ohs is not null, will register all omap_hwmods
+ * listed in @ohs that are valid for this chip.  Returns -EINVAL if
+ * omap_hwmod_init() has already been called or 0 otherwise.
+ */
+int omap_hwmod_init(struct omap_hwmod **ohs)
+{
+	struct omap_hwmod *oh;
+	int r;
+
+	if (inited)
+		return -EINVAL;
+
+	inited = 1;
+
+	if (!ohs)
+		return 0;
+
+	oh = *ohs;
+	while (oh) {
+		if (omap_chip_is(oh->omap_chip)) {
+			r = omap_hwmod_register(oh);
+			WARN(r, "omap_hwmod: %s: omap_hwmod_register returned "
+			     "%d\n", oh->name, r);
+		}
+		oh = *++ohs;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_late_init - do some post-clock framework initialization
+ *
+ * Must be called after omap2_clk_init().  Resolves the struct clk names
+ * to struct clk pointers for each registered omap_hwmod.  Also calls
+ * _setup() on each hwmod.  Returns 0.
+ */
+int omap_hwmod_late_init(void)
+{
+	int r;
+
+	/* XXX check return value */
+	r = omap_hwmod_for_each(_init_clocks);
+	WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
+
+	mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
+	WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
+	     MPU_INITIATOR_NAME);
+
+	omap_hwmod_for_each(_setup);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_unregister - unregister an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Unregisters a previously-registered omap_hwmod @oh.  There's probably
+ * no use case for this, so it is likely to be removed in a later version.
+ *
+ * XXX Free all of the bootmem-allocated structures here when that is
+ * implemented.  Make it clear that core code is the only code that is
+ * expected to unregister modules.
+ */
+int omap_hwmod_unregister(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
+
+	mutex_lock(&omap_hwmod_mutex);
+	list_del(&oh->node);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_enable - enable an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Enable an omap_hwomd @oh.  Intended to be called by omap_device_enable().
+ * Returns -EINVAL on error or passes along the return value from _enable().
+ */
+int omap_hwmod_enable(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	r = _enable(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return r;
+}
+
+/**
+ * omap_hwmod_idle - idle an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Idle an omap_hwomd @oh.  Intended to be called by omap_device_idle().
+ * Returns -EINVAL on error or passes along the return value from _idle().
+ */
+int omap_hwmod_idle(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_idle(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_shutdown - shutdown an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Shutdown an omap_hwomd @oh.  Intended to be called by
+ * omap_device_shutdown().  Returns -EINVAL on error or passes along
+ * the return value from _shutdown().
+ */
+int omap_hwmod_shutdown(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_shutdown(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_enable_clocks - enable main_clk, all interface clocks
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by the omap_device code.
+ */
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
+{
+	mutex_lock(&omap_hwmod_mutex);
+	_enable_clocks(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_disable_clocks - disable main_clk, all interface clocks
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by the omap_device code.
+ */
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
+{
+	mutex_lock(&omap_hwmod_mutex);
+	_disable_clocks(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by drivers and core code when all posted
+ * writes to a device must complete before continuing further
+ * execution (for example, after clearing some device IRQSTATUS
+ * register bits)
+ *
+ * XXX what about targets with multiple OCP threads?
+ */
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
+{
+	BUG_ON(!oh);
+
+	if (!oh->sysconfig || !oh->sysconfig->sysc_flags) {
+		WARN(1, "omap_device: %s: OCP barrier impossible due to "
+		      "device configuration\n", oh->name);
+		return;
+	}
+
+	/*
+	 * Forces posted writes to complete on the OCP thread handling
+	 * register writes
+	 */
+	omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+}
+
+/**
+ * omap_hwmod_reset - reset the hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Under some conditions, a driver may wish to reset the entire device.
+ * Called from omap_device code.  Returns -EINVAL on error or passes along
+ * the return value from _reset()/_enable().
+ */
+int omap_hwmod_reset(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	r = _reset(oh);
+	if (!r)
+		r = _enable(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return r;
+}
+
+/**
+ * omap_hwmod_count_resources - count number of struct resources needed by hwmod
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the first element of an array of struct resource to fill
+ *
+ * Count the number of struct resource array elements necessary to
+ * contain omap_hwmod @oh resources.  Intended to be called by code
+ * that registers omap_devices.  Intended to be used to determine the
+ * size of a dynamically-allocated struct resource array, before
+ * calling omap_hwmod_fill_resources().  Returns the number of struct
+ * resource array elements needed.
+ *
+ * XXX This code is not optimized.  It could attempt to merge adjacent
+ * resource IDs.
+ *
+ */
+int omap_hwmod_count_resources(struct omap_hwmod *oh)
+{
+	int ret, i;
+
+	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
+
+	for (i = 0; i < oh->slaves_cnt; i++)
+		ret += (*oh->slaves + i)->addr_cnt;
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_fill_resources - fill struct resource array with hwmod data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the first element of an array of struct resource to fill
+ *
+ * Fill the struct resource array @res with resource data from the
+ * omap_hwmod @oh.  Intended to be called by code that registers
+ * omap_devices.  See also omap_hwmod_count_resources().  Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
+{
+	int i, j;
+	int r = 0;
+
+	/* For each IRQ, DMA, memory area, fill in array.*/
+
+	for (i = 0; i < oh->mpu_irqs_cnt; i++) {
+		(res + r)->start = *(oh->mpu_irqs + i);
+		(res + r)->end = *(oh->mpu_irqs + i);
+		(res + r)->flags = IORESOURCE_IRQ;
+		r++;
+	}
+
+	for (i = 0; i < oh->sdma_chs_cnt; i++) {
+		(res + r)->name = (oh->sdma_chs + i)->name;
+		(res + r)->start = (oh->sdma_chs + i)->dma_ch;
+		(res + r)->end = (oh->sdma_chs + i)->dma_ch;
+		(res + r)->flags = IORESOURCE_DMA;
+		r++;
+	}
+
+	for (i = 0; i < oh->slaves_cnt; i++) {
+		struct omap_hwmod_ocp_if *os;
+
+		os = *oh->slaves + i;
+
+		for (j = 0; j < os->addr_cnt; j++) {
+			(res + r)->start = (os->addr + j)->pa_start;
+			(res + r)->end = (os->addr + j)->pa_end;
+			(res + r)->flags = IORESOURCE_MEM;
+			r++;
+		}
+	}
+
+	return r;
+}
+
+/**
+ * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
+ * @oh: struct omap_hwmod *
+ *
+ * Return the powerdomain pointer associated with the OMAP module
+ * @oh's main clock.  If @oh does not have a main clk, return the
+ * powerdomain associated with the interface clock associated with the
+ * module's MPU port. (XXX Perhaps this should use the SDMA port
+ * instead?)  Returns NULL on error, or a struct powerdomain * on
+ * success.
+ */
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
+{
+	struct clk *c;
+
+	if (!oh)
+		return NULL;
+
+	if (oh->_clk) {
+		c = oh->_clk;
+	} else {
+		if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+			return NULL;
+		c = oh->slaves[oh->_mpu_port_index]->_clk;
+	}
+
+	return c->clkdm->pwrdm.ptr;
+
+}
+
+/**
+ * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
+ * @oh: struct omap_hwmod *
+ * @init_oh: struct omap_hwmod * (initiator)
+ *
+ * Add a sleep dependency between the initiator @init_oh and @oh.
+ * Intended to be called by DSP/Bridge code via platform_data for the
+ * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
+ * code needs to add/del initiator dependencies dynamically
+ * before/after accessing a device.  Returns the return value from
+ * _add_initiator_dep().
+ *
+ * XXX Keep a usecount in the clockdomain code
+ */
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh)
+{
+	return _add_initiator_dep(oh, init_oh);
+}
+
+/*
+ * XXX what about functions for drivers to save/restore ocp_sysconfig
+ * for context save/restore operations?
+ */
+
+/**
+ * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh
+ * @oh: struct omap_hwmod *
+ * @init_oh: struct omap_hwmod * (initiator)
+ *
+ * Remove a sleep dependency between the initiator @init_oh and @oh.
+ * Intended to be called by DSP/Bridge code via platform_data for the
+ * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
+ * code needs to add/del initiator dependencies dynamically
+ * before/after accessing a device.  Returns the return value from
+ * _del_initiator_dep().
+ *
+ * XXX Keep a usecount in the clockdomain code
+ */
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh)
+{
+	return _del_initiator_dep(oh, init_oh);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to BOTH
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to MAIN
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to ICLK
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to NONE
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_NONE);
+}
+
+/**
+ * omap_hwmod_enable_wakeup - allow device to wake up the system
+ * @oh: struct omap_hwmod *
+ *
+ * Sets the module OCP socket ENAWAKEUP bit to allow the module to
+ * send wakeups to the PRCM.  Eventually this should sets PRCM wakeup
+ * registers to cause the PRCM to receive wakeup events from the
+ * module.  Does not set any wakeup routing registers beyond this
+ * point - if the module is to wake up any other module or subsystem,
+ * that must be set separately.  Called by omap_device code.  Returns
+ * -EINVAL on error or 0 upon success.
+ */
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_enable_wakeup(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_disable_wakeup - prevent device from waking the system
+ * @oh: struct omap_hwmod *
+ *
+ * Clears the module OCP socket ENAWAKEUP bit to prevent the module
+ * from sending wakeups to the PRCM.  Eventually this should clear
+ * PRCM wakeup registers to cause the PRCM to ignore wakeup events
+ * from the module.  Does not set any wakeup routing registers beyond
+ * this point - if the module is to wake up any other module or
+ * subsystem, that must be set separately.  Called by omap_device
+ * code.  Returns -EINVAL on error or 0 upon success.
+ */
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_disable_wakeup(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h
new file mode 100644
index 000000000000..767e4965ac4e
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2420.h
@@ -0,0 +1,141 @@
+/*
+ * omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+
+#ifdef CONFIG_ARCH_OMAP2420
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2420_mpu_hwmod;
+static struct omap_hwmod omap2420_l3_hwmod;
+static struct omap_hwmod omap2420_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
+	.master	= &omap2420_l3_hwmod,
+	.slave	= &omap2420_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
+	.master = &omap2420_mpu_hwmod,
+	.slave	= &omap2420_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
+	&omap2420_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2420_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2420_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
+	.slaves		= omap2420_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+static struct omap_hwmod omap2420_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
+	.master	= &omap2420_l4_core_hwmod,
+	.slave	= &omap2420_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2420_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2420_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
+	.slaves		= omap2420_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2420_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2420_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
+	.slaves		= omap2420_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
+	&omap2420_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2420_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2420_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static __initdata struct omap_hwmod *omap2420_hwmods[] = {
+	&omap2420_l3_hwmod,
+	&omap2420_l4_core_hwmod,
+	&omap2420_l4_wkup_hwmod,
+	&omap2420_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2420_hwmods		0
+#endif
+
+#endif
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h
new file mode 100644
index 000000000000..a412be6420ec
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2430.h
@@ -0,0 +1,143 @@
+/*
+ * omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2430_mpu_hwmod;
+static struct omap_hwmod omap2430_l3_hwmod;
+static struct omap_hwmod omap2430_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
+	.master	= &omap2430_l3_hwmod,
+	.slave	= &omap2430_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
+	.master = &omap2430_mpu_hwmod,
+	.slave	= &omap2430_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
+	&omap2430_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2430_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2430_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
+	.slaves		= omap2430_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+static struct omap_hwmod omap2430_l4_wkup_hwmod;
+static struct omap_hwmod omap2430_mmc1_hwmod;
+static struct omap_hwmod omap2430_mmc2_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
+	.master	= &omap2430_l4_core_hwmod,
+	.slave	= &omap2430_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2430_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2430_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
+	.slaves		= omap2430_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2430_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2430_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
+	.slaves		= omap2430_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
+	&omap2430_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2430_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2430_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static __initdata struct omap_hwmod *omap2430_hwmods[] = {
+	&omap2430_l3_hwmod,
+	&omap2430_l4_core_hwmod,
+	&omap2430_l4_wkup_hwmod,
+	&omap2430_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2430_hwmods		0
+#endif
+
+#endif
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
new file mode 100644
index 000000000000..1e069f831575
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h
@@ -0,0 +1,168 @@
+/*
+ * omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+
+#ifdef CONFIG_ARCH_OMAP34XX
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-34xx.h"
+
+static struct omap_hwmod omap34xx_mpu_hwmod;
+static struct omap_hwmod omap34xx_l3_hwmod;
+static struct omap_hwmod omap34xx_l4_core_hwmod;
+static struct omap_hwmod omap34xx_l4_per_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
+	.master	= &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
+	.master = &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_per_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
+	.master = &omap34xx_mpu_hwmod,
+	.slave	= &omap34xx_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
+	&omap34xx_l3__l4_core,
+	&omap34xx_l3__l4_per,
+};
+
+/* L3 */
+static struct omap_hwmod omap34xx_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap34xx_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l3_masters),
+	.slaves		= omap34xx_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+static struct omap_hwmod omap34xx_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
+	.master	= &omap34xx_l4_core_hwmod,
+	.slave	= &omap34xx_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
+	&omap34xx_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap34xx_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap34xx_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_core_masters),
+	.slaves		= omap34xx_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
+	&omap34xx_l3__l4_per,
+};
+
+/* Master interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
+};
+
+/* L4 PER */
+static struct omap_hwmod omap34xx_l4_per_hwmod = {
+	.name		= "l4_per_hwmod",
+	.masters	= omap34xx_l4_per_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_per_masters),
+	.slaves		= omap34xx_l4_per_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_per_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap34xx_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_masters),
+	.slaves		= omap34xx_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap34xx_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "arm_fck",
+	.masters	= omap34xx_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+	&omap34xx_l3_hwmod,
+	&omap34xx_l4_core_hwmod,
+	&omap34xx_l4_per_hwmod,
+	&omap34xx_l4_wkup_hwmod,
+	&omap34xx_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap34xx_hwmods		0
+#endif
+
+#endif
+
+
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 6cc375a275be..1b4c1600f8d8 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -20,13 +20,16 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/timer.h>
+#include <linux/sched.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <mach/clock.h>
 #include <mach/board.h>
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
 
 #include "prm.h"
 #include "cm.h"
@@ -48,7 +51,9 @@ int omap2_pm_debug;
 	regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
 	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
+
+static int __init pm_dbg_init(void);
 
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
@@ -150,3 +155,425 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 	for (i = 0; i < reg_count; i++)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static void pm_dbg_regset_store(u32 *ptr);
+
+struct dentry *pm_dbg_dir;
+
+static int pm_dbg_init_done;
+
+enum {
+	DEBUG_FILE_COUNTERS = 0,
+	DEBUG_FILE_TIMERS,
+};
+
+struct pm_module_def {
+	char name[8]; /* Name of the module */
+	short type; /* CM or PRM */
+	unsigned short offset;
+	int low; /* First register address on this module */
+	int high; /* Last register address on this module */
+};
+
+#define MOD_CM 0
+#define MOD_PRM 1
+
+static const struct pm_module_def *pm_dbg_reg_modules;
+static const struct pm_module_def omap3_pm_reg_modules[] = {
+	{ "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c },
+	{ "OCP", MOD_CM, OCP_MOD, 0, 0x10 },
+	{ "MPU", MOD_CM, MPU_MOD, 4, 0x4c },
+	{ "CORE", MOD_CM, CORE_MOD, 0, 0x4c },
+	{ "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c },
+	{ "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 },
+	{ "CCR", MOD_CM, PLL_MOD, 0, 0x70 },
+	{ "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c },
+	{ "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c },
+	{ "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c },
+	{ "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 },
+	{ "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 },
+	{ "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c },
+
+	{ "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc },
+	{ "OCP", MOD_PRM, OCP_MOD, 4, 0x1c },
+	{ "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 },
+	{ "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 },
+	{ "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 },
+	{ "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 },
+	{ "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 },
+	{ "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 },
+	{ "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 },
+	{ "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 },
+	{ "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 },
+	{ "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 },
+	{ "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 },
+	{ "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 },
+	{ "", 0, 0, 0, 0 },
+};
+
+#define PM_DBG_MAX_REG_SETS 4
+
+static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS];
+
+static int pm_dbg_get_regset_size(void)
+{
+	static int regset_size;
+
+	if (regset_size == 0) {
+		int i = 0;
+
+		while (pm_dbg_reg_modules[i].name[0] != 0) {
+			regset_size += pm_dbg_reg_modules[i].high +
+				4 - pm_dbg_reg_modules[i].low;
+			i++;
+		}
+	}
+	return regset_size;
+}
+
+static int pm_dbg_show_regs(struct seq_file *s, void *unused)
+{
+	int i, j;
+	unsigned long val;
+	int reg_set = (int)s->private;
+	u32 *ptr;
+	void *store = NULL;
+	int regs;
+	int linefeed;
+
+	if (reg_set == 0) {
+		store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
+		ptr = store;
+		pm_dbg_regset_store(ptr);
+	} else {
+		ptr = pm_dbg_reg_set[reg_set - 1];
+	}
+
+	i = 0;
+
+	while (pm_dbg_reg_modules[i].name[0] != 0) {
+		regs = 0;
+		linefeed = 0;
+		if (pm_dbg_reg_modules[i].type == MOD_CM)
+			seq_printf(s, "MOD: CM_%s (%08x)\n",
+				pm_dbg_reg_modules[i].name,
+				(u32)(OMAP3430_CM_BASE +
+				pm_dbg_reg_modules[i].offset));
+		else
+			seq_printf(s, "MOD: PRM_%s (%08x)\n",
+				pm_dbg_reg_modules[i].name,
+				(u32)(OMAP3430_PRM_BASE +
+				pm_dbg_reg_modules[i].offset));
+
+		for (j = pm_dbg_reg_modules[i].low;
+			j <= pm_dbg_reg_modules[i].high; j += 4) {
+			val = *(ptr++);
+			if (val != 0) {
+				regs++;
+				if (linefeed) {
+					seq_printf(s, "\n");
+					linefeed = 0;
+				}
+				seq_printf(s, "  %02x => %08lx", j, val);
+				if (regs % 4 == 0)
+					linefeed = 1;
+			}
+		}
+		seq_printf(s, "\n");
+		i++;
+	}
+
+	if (store != NULL)
+		kfree(store);
+
+	return 0;
+}
+
+static void pm_dbg_regset_store(u32 *ptr)
+{
+	int i, j;
+	u32 val;
+
+	i = 0;
+
+	while (pm_dbg_reg_modules[i].name[0] != 0) {
+		for (j = pm_dbg_reg_modules[i].low;
+			j <= pm_dbg_reg_modules[i].high; j += 4) {
+			if (pm_dbg_reg_modules[i].type == MOD_CM)
+				val = cm_read_mod_reg(
+					pm_dbg_reg_modules[i].offset, j);
+			else
+				val = prm_read_mod_reg(
+					pm_dbg_reg_modules[i].offset, j);
+			*(ptr++) = val;
+		}
+		i++;
+	}
+}
+
+int pm_dbg_regset_save(int reg_set)
+{
+	if (pm_dbg_reg_set[reg_set-1] == NULL)
+		return -EINVAL;
+
+	pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]);
+
+	return 0;
+}
+
+static const char pwrdm_state_names[][4] = {
+	"OFF",
+	"RET",
+	"INA",
+	"ON"
+};
+
+void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
+{
+	s64 t;
+
+	if (!pm_dbg_init_done)
+		return ;
+
+	/* Update timer for previous state */
+	t = sched_clock();
+
+	pwrdm->state_timer[prev] += t - pwrdm->timer;
+
+	pwrdm->timer = t;
+}
+
+static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+
+	if (strcmp(clkdm->name, "emu_clkdm") == 0 ||
+		strcmp(clkdm->name, "wkup_clkdm") == 0 ||
+		strncmp(clkdm->name, "dpll", 4) == 0)
+		return 0;
+
+	seq_printf(s, "%s->%s (%d)", clkdm->name,
+			clkdm->pwrdm.ptr->name,
+			atomic_read(&clkdm->usecount));
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+	int i;
+
+	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
+		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
+		strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	if (pwrdm->state != pwrdm_read_pwrst(pwrdm))
+		printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n",
+			pwrdm->name, pwrdm->state, pwrdm_read_pwrst(pwrdm));
+
+	seq_printf(s, "%s (%s)", pwrdm->name,
+			pwrdm_state_names[pwrdm->state]);
+	for (i = 0; i < 4; i++)
+		seq_printf(s, ",%s:%d", pwrdm_state_names[i],
+			pwrdm->state_counter[i]);
+
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+	int i;
+
+	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
+		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
+		strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	pwrdm_state_switch(pwrdm);
+
+	seq_printf(s, "%s (%s)", pwrdm->name,
+		pwrdm_state_names[pwrdm->state]);
+
+	for (i = 0; i < 4; i++)
+		seq_printf(s, ",%s:%lld", pwrdm_state_names[i],
+			pwrdm->state_timer[i]);
+
+	seq_printf(s, "\n");
+	return 0;
+}
+
+static int pm_dbg_show_counters(struct seq_file *s, void *unused)
+{
+	pwrdm_for_each(pwrdm_dbg_show_counter, s);
+	clkdm_for_each(clkdm_dbg_show_counter, s);
+
+	return 0;
+}
+
+static int pm_dbg_show_timers(struct seq_file *s, void *unused)
+{
+	pwrdm_for_each(pwrdm_dbg_show_timer, s);
+	return 0;
+}
+
+static int pm_dbg_open(struct inode *inode, struct file *file)
+{
+	switch ((int)inode->i_private) {
+	case DEBUG_FILE_COUNTERS:
+		return single_open(file, pm_dbg_show_counters,
+			&inode->i_private);
+	case DEBUG_FILE_TIMERS:
+	default:
+		return single_open(file, pm_dbg_show_timers,
+			&inode->i_private);
+	};
+}
+
+static int pm_dbg_reg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pm_dbg_show_regs, inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+	.open           = pm_dbg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static const struct file_operations debug_reg_fops = {
+	.open           = pm_dbg_reg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+int pm_dbg_regset_init(int reg_set)
+{
+	char name[2];
+
+	if (!pm_dbg_init_done)
+		pm_dbg_init();
+
+	if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS ||
+		pm_dbg_reg_set[reg_set-1] != NULL)
+		return -EINVAL;
+
+	pm_dbg_reg_set[reg_set-1] =
+		kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
+
+	if (pm_dbg_reg_set[reg_set-1] == NULL)
+		return -ENOMEM;
+
+	if (pm_dbg_dir != NULL) {
+		sprintf(name, "%d", reg_set);
+
+		(void) debugfs_create_file(name, S_IRUGO,
+			pm_dbg_dir, (void *)reg_set, &debug_reg_fops);
+	}
+
+	return 0;
+}
+
+static int pwrdm_suspend_get(void *data, u64 *val)
+{
+	*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+
+	if (*val >= 0)
+		return 0;
+	return *val;
+}
+
+static int pwrdm_suspend_set(void *data, u64 val)
+{
+	return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
+			pwrdm_suspend_set, "%llu\n");
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
+{
+	int i;
+	s64 t;
+	struct dentry *d;
+
+	t = sched_clock();
+
+	for (i = 0; i < 4; i++)
+		pwrdm->state_timer[i] = 0;
+
+	pwrdm->timer = t;
+
+	if (strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
+
+	(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
+			(void *)pwrdm, &pwrdm_suspend_fops);
+
+	return 0;
+}
+
+static int __init pm_dbg_init(void)
+{
+	int i;
+	struct dentry *d;
+	char name[2];
+
+	if (pm_dbg_init_done)
+		return 0;
+
+	if (cpu_is_omap34xx())
+		pm_dbg_reg_modules = omap3_pm_reg_modules;
+	else {
+		printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
+		return -ENODEV;
+	}
+		
+	d = debugfs_create_dir("pm_debug", NULL);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+
+	(void) debugfs_create_file("count", S_IRUGO,
+		d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
+	(void) debugfs_create_file("time", S_IRUGO,
+		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
+
+	pwrdm_for_each(pwrdms_setup, (void *)d);
+
+	pm_dbg_dir = debugfs_create_dir("registers", d);
+	if (IS_ERR(pm_dbg_dir))
+		return PTR_ERR(pm_dbg_dir);
+
+	(void) debugfs_create_file("current", S_IRUGO,
+		pm_dbg_dir, (void *)0, &debug_reg_fops);
+
+	for (i = 0; i < PM_DBG_MAX_REG_SETS; i++)
+		if (pm_dbg_reg_set[i] != NULL) {
+			sprintf(name, "%d", i+1);
+			(void) debugfs_create_file(name, S_IRUGO,
+				pm_dbg_dir, (void *)(i+1), &debug_reg_fops);
+
+		}
+
+	pm_dbg_init_done = 1;
+
+	return 0;
+}
+arch_initcall(pm_dbg_init);
+
+#else
+void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
+#endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 21201cd4117b..8400f5768923 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,12 +11,23 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
+#include <mach/powerdomain.h>
+
+extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
+extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
+extern int pm_dbg_regset_save(int reg_set);
+extern int pm_dbg_regset_init(int reg_set);
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
 #define omap2_pm_debug				0
+#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
+#define pm_dbg_regset_save(reg_set) do {} while (0);
+#define pm_dbg_regset_init(reg_set) do {} while (0);
 #endif /* CONFIG_PM_DEBUG */
 
 extern void omap24xx_idle_loop_suspend(void);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 528dbdc26e23..bff5c4e89742 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -333,7 +333,7 @@ static struct platform_suspend_ops omap_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm, void *unused)
 {
 	omap2_clkdm_allow_idle(clkdm);
 	return 0;
@@ -385,7 +385,7 @@ static void __init prcm_setup_regs(void)
 	omap2_clkdm_sleep(gfx_clkdm);
 
 	/* Enable clockdomain hardware-supervised control for all clkdms */
-	clkdm_for_each(_pm_clkdm_enable_hwsup);
+	clkdm_for_each(_pm_clkdm_enable_hwsup, NULL);
 
 	/* Enable clock autoidle for all domains */
 	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 488d595d8e4b..0ff5a6c53aa0 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -170,6 +170,8 @@ static void omap_sram_idle(void)
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
 		return;
 	}
+	pwrdm_pre_transition();
+
 	omap2_gpio_prepare_for_retention();
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
@@ -182,6 +184,9 @@ static void omap_sram_idle(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 	omap2_gpio_resume_after_retention();
+
+	pwrdm_post_transition();
+
 }
 
 /*
@@ -271,6 +276,7 @@ static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 	if (sleep_switch) {
 		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
 		pwrdm_wait_transition(pwrdm);
+		pwrdm_state_switch(pwrdm);
 	}
 
 err:
@@ -658,14 +664,38 @@ static void __init prcm_setup_regs(void)
 	omap3_d2d_idle();
 }
 
-static int __init pwrdms_setup(struct powerdomain *pwrdm)
+int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (pwrst->pwrdm == pwrdm)
+			return pwrst->next_state;
+	}
+	return -EINVAL;
+}
+
+int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
+{
+	struct power_state *pwrst;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (pwrst->pwrdm == pwrdm) {
+			pwrst->next_state = state;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	struct power_state *pwrst;
 
 	if (!pwrdm->pwrsts)
 		return 0;
 
-	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)
 		return -ENOMEM;
 	pwrst->pwrdm = pwrdm;
@@ -683,7 +713,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
  * supported. Initiate sleep transition for other clockdomains, if
  * they are not used
  */
-static int __init clkdms_setup(struct clockdomain *clkdm)
+static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
@@ -716,13 +746,13 @@ static int __init omap3_pm_init(void)
 		goto err1;
 	}
 
-	ret = pwrdm_for_each(pwrdms_setup);
+	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
 		printk(KERN_ERR "Failed to setup powerdomains\n");
 		goto err2;
 	}
 
-	(void) clkdm_for_each(clkdms_setup);
+	(void) clkdm_for_each(clkdms_setup, NULL);
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (mpu_pwrdm == NULL) {
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 983f1cb676be..2594cbff3947 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -35,6 +35,13 @@
 #include <mach/powerdomain.h>
 #include <mach/clockdomain.h>
 
+#include "pm.h"
+
+enum {
+	PWRDM_STATE_NOW = 0,
+	PWRDM_STATE_PREV,
+};
+
 /* pwrdm_list contains all registered struct powerdomains */
 static LIST_HEAD(pwrdm_list);
 
@@ -83,7 +90,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 	if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
 		return ERR_PTR(-EINVAL);
 
-	for (pd = deps; pd; pd++) {
+	for (pd = deps; pd->pwrdm_name; pd++) {
 
 		if (!omap_chip_is(pd->omap_chip))
 			continue;
@@ -96,12 +103,71 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 
 	}
 
-	if (!pd)
+	if (!pd->pwrdm_name)
 		return ERR_PTR(-ENOENT);
 
 	return pd->pwrdm;
 }
 
+static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
+{
+
+	int prev;
+	int state;
+
+	if (pwrdm == NULL)
+		return -EINVAL;
+
+	state = pwrdm_read_pwrst(pwrdm);
+
+	switch (flag) {
+	case PWRDM_STATE_NOW:
+		prev = pwrdm->state;
+		break;
+	case PWRDM_STATE_PREV:
+		prev = pwrdm_read_prev_pwrst(pwrdm);
+		if (pwrdm->state != prev)
+			pwrdm->state_counter[prev]++;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (state != prev)
+		pwrdm->state_counter[state]++;
+
+	pm_dbg_update_time(pwrdm, prev);
+
+	pwrdm->state = state;
+
+	return 0;
+}
+
+static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
+{
+	pwrdm_clear_all_prev_pwrst(pwrdm);
+	_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+	return 0;
+}
+
+static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
+{
+	_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
+	return 0;
+}
+
+static __init void _pwrdm_setup(struct powerdomain *pwrdm)
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		pwrdm->state_counter[i] = 0;
+
+	pwrdm_wait_transition(pwrdm);
+	pwrdm->state = pwrdm_read_pwrst(pwrdm);
+	pwrdm->state_counter[pwrdm->state] = 1;
+
+}
 
 /* Public functions */
 
@@ -117,9 +183,12 @@ void pwrdm_init(struct powerdomain **pwrdm_list)
 {
 	struct powerdomain **p = NULL;
 
-	if (pwrdm_list)
-		for (p = pwrdm_list; *p; p++)
+	if (pwrdm_list) {
+		for (p = pwrdm_list; *p; p++) {
 			pwrdm_register(*p);
+			_pwrdm_setup(*p);
+		}
+	}
 }
 
 /**
@@ -217,7 +286,8 @@ struct powerdomain *pwrdm_lookup(const char *name)
  * anything else to indicate failure; or -EINVAL if the function
  * pointer is null.
  */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user)
 {
 	struct powerdomain *temp_pwrdm;
 	unsigned long flags;
@@ -228,7 +298,7 @@ int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
 
 	read_lock_irqsave(&pwrdm_rwlock, flags);
 	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
-		ret = (*fn)(temp_pwrdm);
+		ret = (*fn)(temp_pwrdm, user);
 		if (ret)
 			break;
 	}
@@ -1110,4 +1180,36 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+int pwrdm_state_switch(struct powerdomain *pwrdm)
+{
+	return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+}
+
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
+{
+	if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
+		pwrdm_wait_transition(clkdm->pwrdm.ptr);
+		return pwrdm_state_switch(clkdm->pwrdm.ptr);
+	}
+
+	return -EINVAL;
+}
+int pwrdm_clk_state_switch(struct clk *clk)
+{
+	if (clk != NULL && clk->clkdm != NULL)
+		return pwrdm_clkdm_state_switch(clk->clkdm);
+	return -EINVAL;
+}
+
+int pwrdm_pre_transition(void)
+{
+	pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+	return 0;
+}
+
+int pwrdm_post_transition(void)
+{
+	pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+	return 0;
+}
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 9937e2814696..03c467c35f54 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global PRM registers
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1a8bbd094066..0837eda5f2b6 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg)
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index ce22344b94e7..3a529c77daa8 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -123,6 +123,21 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 	}
 };
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct plat_serial8250_port serial_platform_data3[] = {
+	{
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+		.flags		= 0
+	}
+};
+#endif
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
@@ -470,7 +485,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	p->flags |= UPF_SHARE_IRQ;
+	p->irqflags |= IRQF_SHARED;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
@@ -560,12 +575,22 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 			},
 		},
 	},
+#ifdef CONFIG_ARCH_OMAP4
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= 3
+			.dev			= {
+				.platform_data	= serial_platform_data3,
+			},
+		},
+	},
+#endif
 };
 
-void __init omap_serial_init(void)
+void __init omap_serial_early_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 	char name[16];
 
 	/*
@@ -574,23 +599,12 @@ void __init omap_serial_init(void)
 	 * if not needed.
 	 */
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->membase = NULL;
-			p->mapbase = 0;
-			continue;
-		}
-
 		sprintf(name, "uart%d_ick", i+1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
@@ -605,8 +619,11 @@ void __init omap_serial_init(void)
 			uart->fck = NULL;
 		}
 
-		if (!uart->ick || !uart->fck)
-			continue;
+		/* FIXME: Remove this once the clkdev is ready */
+		if (!cpu_is_omap44xx()) {
+			if (!uart->ick || !uart->fck)
+				continue;
+		}
 
 		uart->num = i;
 		p->private_data = uart;
@@ -617,6 +634,18 @@ void __init omap_serial_init(void)
 			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
+	}
+}
+
+void __init omap_serial_init(void)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index bb299851116d..9b62208658bc 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 9955abcaeb31..df2cd9277c00 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 97eeeebcb066..e2338c0aebcf 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+	twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
 #endif
 	omap_dm_timer_init();
 
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 739e59e8025c..1145a2562b0f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -31,15 +31,6 @@
 #include <mach/mux.h>
 #include <mach/usb.h>
 
-#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
-
-static void __init usb_musb_pm_init(void)
-{
-	/* Ensure force-idle mode for OTG controller */
-	if (cpu_is_omap34xx())
-		omap_writel(0, OTG_SYSCONFIG);
-}
-
 #ifdef CONFIG_USB_MUSB_SOC
 
 static struct resource musb_resources[] = {
@@ -173,13 +164,10 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
-
-	usb_musb_pm_init();
 }
 
 #else
 void __init usb_musb_init(void)
 {
-	usb_musb_pm_init();
 }
 #endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index efe85d095190..64b3f52bd9b2 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -120,6 +120,10 @@ config OMAP_MBOX_FWK
 config OMAP_IOMMU
 	tristate
 
+config OMAP_IOMMU_DEBUG
+	depends on OMAP_IOMMU
+	tristate
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
@@ -183,6 +187,19 @@ config OMAP_SERIAL_WAKE
 	  to data on the serial RX line. This allows you to wake the
 	  system from serial console.
 
+choice
+	prompt "OMAP PM layer selection"
+	depends on ARCH_OMAP
+	default OMAP_PM_NOOP
+
+config OMAP_PM_NONE
+	bool "No PM layer"
+
+config OMAP_PM_NOOP
+	bool "No-op/debug PM layer"
+
+endchoice
+
 endmenu
 
 endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index a83279523958..98f01910c2cf 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -12,8 +12,13 @@ obj-  :=
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
+# omap_device support (OMAP2+ only at the moment)
+obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
+obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
@@ -25,3 +30,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index e8c327a45a55..bf880e966d3b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -488,7 +488,7 @@ static int __init clk_debugfs_init(void)
 	}
 	return 0;
 err_out:
-	debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+	debugfs_remove_recursive(clk_debugfs_root);
 	return err;
 }
 late_initcall(clk_debugfs_init);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ebcf006406f9..3a4768d55895 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -54,50 +54,6 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 	struct omap_board_config_kernel *kinfo = NULL;
 	int i;
 
-#ifdef CONFIG_OMAP_BOOT_TAG
-	struct omap_board_config_entry *info = NULL;
-
-	if (omap_bootloader_tag_len > 4)
-		info = (struct omap_board_config_entry *) omap_bootloader_tag;
-	while (info != NULL) {
-		u8 *next;
-
-		if (info->tag == tag) {
-			if (skip == 0)
-				break;
-			skip--;
-		}
-
-		if ((info->len & 0x03) != 0) {
-			/* We bail out to avoid an alignment fault */
-			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
-			       info->len, info->tag);
-			return NULL;
-		}
-		next = (u8 *) info + sizeof(*info) + info->len;
-		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
-			info = NULL;
-		else
-			info = (struct omap_board_config_entry *) next;
-	}
-	if (info != NULL) {
-		/* Check the length as a lame attempt to check for
-		 * binary inconsistency. */
-		if (len != NO_LENGTH_CHECK) {
-			/* Word-align len */
-			if (len & 0x03)
-				len = (len + 3) & ~0x03;
-			if (info->len != len) {
-				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
-				       tag, len, info->len);
-				return NULL;
-			}
-		}
-		if (len_out != NULL)
-			*len_out = info->len;
-		return info->data;
-	}
-#endif
 	/* Try to find the config from the board-specific structures
 	 * in the kernel. */
 	for (i = 0; i < omap_board_config_size; i++) {
@@ -127,50 +83,6 @@ const void *omap_get_var_config(u16 tag, size_t *len)
 }
 EXPORT_SYMBOL(omap_get_var_config);
 
-static int __init omap_add_serial_console(void)
-{
-	const struct omap_serial_console_config *con_info;
-	const struct omap_uart_config *uart_info;
-	static char speed[11], *opt = NULL;
-	int line, i, uart_idx;
-
-	uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
-					struct omap_serial_console_config);
-	if (uart_info == NULL || con_info == NULL)
-		return 0;
-
-	if (con_info->console_uart == 0)
-		return 0;
-
-	if (con_info->console_speed) {
-		snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
-		opt = speed;
-	}
-
-	uart_idx = con_info->console_uart - 1;
-	if (uart_idx >= OMAP_MAX_NR_PORTS) {
-		printk(KERN_INFO "Console: external UART#%d. "
-			"Not adding it as console this time.\n",
-			uart_idx + 1);
-		return 0;
-	}
-	if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
-		printk(KERN_ERR "Console: Selected UART#%d is "
-			"not enabled for this platform\n",
-			uart_idx + 1);
-		return -1;
-	}
-	line = 0;
-	for (i = 0; i < uart_idx; i++) {
-		if (uart_info->enabled_uarts & (1 << i))
-			line++;
-	}
-	return add_preferred_console("ttyS", line, opt);
-}
-console_initcall(omap_add_serial_console);
-
-
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
  * OMAP 730 and 1510.  Other timers could be used as clocksources, with
@@ -253,11 +165,8 @@ static struct clocksource clocksource_32k = {
  */
 unsigned long long sched_clock(void)
 {
-	unsigned long long ret;
-
-	ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
-	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
-	return ret;
+	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
+				  clocksource_32k.mult, clocksource_32k.shift);
 }
 
 static int __init omap_init_clocksource_32k(void)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 9b00f4cbc903..fd3154ae69b1 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2347,16 +2347,16 @@ static int __init omap_init_dma(void)
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
+		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 7f50b6103dee..d325b54daeb5 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		timer->io_base = IO_ADDRESS(timer->phys_base);
+		if (cpu_class_is_omap1())
+			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
+		else
+			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 176c86e5531d..693839c89ad0 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE		OMAP1_IO_ADDRESS(0xfffce000)
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE		IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE		IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE		IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbe400)
+#define OMAP1610_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbec00)
+#define OMAP1610_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbb400)
+#define OMAP1610_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbbc00)
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -70,12 +70,12 @@
 /*
  * OMAP730 specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP730_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP730_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP730_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP730_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP730_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP730_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP730_GPIO_DATA_INPUT		0x00
 #define OMAP730_GPIO_DATA_OUTPUT	0x04
 #define OMAP730_GPIO_DIR_CONTROL	0x08
@@ -86,12 +86,12 @@
 /*
  * OMAP850 specific GPIO registers
  */
-#define OMAP850_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP850_GPIO_DATA_INPUT		0x00
 #define OMAP850_GPIO_DATA_OUTPUT	0x04
 #define OMAP850_GPIO_DIR_CONTROL	0x08
@@ -99,19 +99,21 @@
 #define OMAP850_GPIO_INT_MASK		0x10
 #define OMAP850_GPIO_INT_STATUS		0x14
 
+#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
+
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE		IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE		IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE		IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48018000)
+#define OMAP242X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4801a000)
+#define OMAP242X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x4801c000)
+#define OMAP242X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x4801e000)
 
-#define OMAP243X_GPIO1_BASE		IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE		IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE		IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE		IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE		IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x4900C000)
+#define OMAP243X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4900E000)
+#define OMAP243X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49010000)
+#define OMAP243X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49012000)
+#define OMAP243X_GPIO5_BASE		OMAP2_IO_ADDRESS(0x480B6000)
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -168,24 +170,22 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE		IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE		IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE		IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48310000)
+#define OMAP34XX_GPIO2_BASE		OMAP2_IO_ADDRESS(0x49050000)
+#define OMAP34XX_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49052000)
+#define OMAP34XX_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49054000)
+#define OMAP34XX_GPIO5_BASE		OMAP2_IO_ADDRESS(0x49056000)
+#define OMAP34XX_GPIO6_BASE		OMAP2_IO_ADDRESS(0x49058000)
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
-
-#define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
 
 struct gpio_bank {
 	void __iomem *base;
@@ -221,7 +221,7 @@ struct gpio_bank {
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
+	{ OMAP1_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
 	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -231,14 +231,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
 	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
@@ -250,7 +250,7 @@ static struct gpio_bank gpio_bank_730[7] = {
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
@@ -2032,7 +2032,7 @@ void omap2_gpio_resume_after_retention(void)
 		return;
 	for (i = 0; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l;
+		u32 l, gen, gen0, gen1;
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
@@ -2056,13 +2056,32 @@ void omap2_gpio_resume_after_retention(void)
 		 * this silicon bug. */
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
-		if (l) {
+
+		/*
+		 * No need to generate IRQs for the rising edge for gpio IRQs
+		 * configured with falling edge only; and vice versa.
+		 */
+		gen0 = l & bank->saved_fallingdetect;
+		gen0 &= bank->saved_datain;
+
+		gen1 = l & bank->saved_risingdetect;
+		gen1 &= ~(bank->saved_datain);
+
+		/* FIXME: Consider GPIO IRQs with level detections properly! */
+		gen = l & (~(bank->saved_fallingdetect) &
+				~(bank->saved_risingdetect));
+		/* Consider all GPIO IRQs needed to be updated */
+		gen |= gen0 | gen1;
+
+		if (gen) {
 			u32 old0, old1;
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+			__raw_writel(old0 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+			__raw_writel(old1 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 #endif
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 50ea79a0efa2..8e913c322810 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -16,10 +16,8 @@
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_UART		0x4f07
 #define OMAP_TAG_FBMEM		0x4f08
 #define OMAP_TAG_STI_CONSOLE	0x4f09
 #define OMAP_TAG_CAMERA_SENSOR	0x4f0a
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
index b9d0dd2da89b..99ebd886f134 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -95,7 +95,8 @@ int clkdm_register(struct clockdomain *clkdm);
 int clkdm_unregister(struct clockdomain *clkdm);
 struct clockdomain *clkdm_lookup(const char *name);
 
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm));
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
+			void *user);
 struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
 
 void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 8140dbccb7bc..826d317cdbec 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -20,15 +20,15 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 56426ed45ef4..a5592991634d 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
 		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
 		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
 		mov	\irqstat, #0xffffffff
@@ -53,7 +53,7 @@
 		cmp	\irqnr, #0
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		addeqs	\irqnr, \irqnr, #32
 1510:
@@ -68,9 +68,9 @@
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
 #include <mach/omap44xx.h>
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 2b22a8799bc6..633ff688b928 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -29,7 +29,7 @@
 #include <linux/io.h>
 #include <mach/irqs.h>
 
-#define OMAP_MPUIO_BASE			0xfffb5000
+#define OMAP1_MPUIO_BASE			0xfffb5000
 
 #if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
 
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 21fb0efdda86..8d32df32b0b1 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -54,17 +54,33 @@
  * ----------------------------------------------------------------------------
  */
 
-#if defined(CONFIG_ARCH_OMAP1)
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#define OMAP2_IO_OFFSET		0x90000000
+#define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#define IO_PHYS			0xFFFB0000
-#define IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
-#define IO_SIZE			0x40000
-#define IO_VIRT			(IO_PHYS - IO_OFFSET)
-#define __IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define __OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)		((va) + IO_OFFSET)
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
 
-#elif defined(CONFIG_ARCH_OMAP2)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP2 */
 #define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
@@ -87,11 +103,6 @@
 #define OMAP243X_SMS_VIRT	0xFC000000
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)	/* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_24XX_VIRT	0xe0000000
@@ -103,7 +114,11 @@
 #define DSP_MMU_24XX_VIRT	0xe2000000
 #define DSP_MMU_24XX_SIZE	SZ_4K
 
-#elif defined(CONFIG_ARCH_OMAP3)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP3 */
 #define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
@@ -143,12 +158,6 @@
 #define OMAP343X_SDRC_VIRT	0xFD000000
 #define OMAP343X_SDRC_SIZE	SZ_1M
 
-
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_34XX_VIRT	0xe0000000
@@ -160,8 +169,12 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#elif defined(CONFIG_ARCH_OMAP4)
 /* We map both L3 and L4 on OMAP4 */
 #define L3_44XX_PHYS		L3_44XX_BASE
 #define L3_44XX_VIRT		0xd4000000
@@ -189,38 +202,24 @@
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
 
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
-#endif
-
-#define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
-#define OMAP1_IO_ADDRESS(pa)	IOMEM(__OMAP1_IO_ADDRESS(pa))
-#define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
+/*
+ * ----------------------------------------------------------------------------
+ * Omap specific register access
+ * ----------------------------------------------------------------------------
+ */
 
-#ifdef __ASSEMBLER__
-#define IOMEM(x)		(x)
-#else
-#define IOMEM(x)		((void __force __iomem *)(x))
+#ifndef __ASSEMBLER__
 
 /*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
-#define omap_readb(a)		__raw_readb(IO_ADDRESS(a))
-#define omap_readw(a)		__raw_readw(IO_ADDRESS(a))
-#define omap_readl(a)		__raw_readl(IO_ADDRESS(a))
 
-#define omap_writeb(v,a)	__raw_writeb(v, IO_ADDRESS(a))
-#define omap_writew(v,a)	__raw_writew(v, IO_ADDRESS(a))
-#define omap_writel(v,a)	__raw_writel(v, IO_ADDRESS(a))
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
 
 struct omap_sdrc_params;
 
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
index 769b00b4c34a..46d41ac83dbf 100644
--- a/arch/arm/plat-omap/include/mach/iommu.h
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -95,7 +95,7 @@ struct iommu_functions {
 
 	void (*save_ctx)(struct iommu *obj);
 	void (*restore_ctx)(struct iommu *obj);
-	ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
 };
 
 struct iommu_platform_data {
@@ -162,7 +162,7 @@ extern void uninstall_iommu_arch(const struct iommu_functions *ops);
 extern int foreach_iommu_device(void *data,
 				int (*fn)(struct device *, void *));
 
-extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
-extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
 
 #endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
index 39b591ff54bb..f82a8dcaad94 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -25,7 +25,7 @@ typedef struct {
 } xip_omap_mpu_timer_regs_t;
 
 #define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 	(n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long xip_omap_mpu_timer_read(int nr)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 80281c458baf..98dfab651dfc 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -857,6 +857,37 @@ enum omap34xx_index {
 	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
 	H16_34XX_SDRC_CKE0,
 	H17_34XX_SDRC_CKE1,
+
+	/* MMC1 */
+	N28_3430_MMC1_CLK,
+	M27_3430_MMC1_CMD,
+	N27_3430_MMC1_DAT0,
+	N26_3430_MMC1_DAT1,
+	N25_3430_MMC1_DAT2,
+	P28_3430_MMC1_DAT3,
+	P27_3430_MMC1_DAT4,
+	P26_3430_MMC1_DAT5,
+	R27_3430_MMC1_DAT6,
+	R25_3430_MMC1_DAT7,
+
+	/* MMC2 */
+	AE2_3430_MMC2_CLK,
+	AG5_3430_MMC2_CMD,
+	AH5_3430_MMC2_DAT0,
+	AH4_3430_MMC2_DAT1,
+	AG4_3430_MMC2_DAT2,
+	AF4_3430_MMC2_DAT3,
+
+	/* MMC3 */
+	AF10_3430_MMC3_CLK,
+	AC3_3430_MMC3_CMD,
+	AE11_3430_MMC3_DAT0,
+	AH9_3430_MMC3_DAT1,
+	AF13_3430_MMC3_DAT2,
+	AF13_3430_MMC3_DAT3,
+
+	/* SYS_NIRQ T2 INT1 */
+	AF26_34XX_SYS_NIRQ,
 };
 
 struct omap_mux_cfg {
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/mach/omap-pm.h
new file mode 100644
index 000000000000..3ee41d711492
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-pm.h
@@ -0,0 +1,301 @@
+/*
+ * omap-pm.h - OMAP power management interface
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
+ * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
+ * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
+ * Richard Woodruff
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
+#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
+
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+
+#include "powerdomain.h"
+
+/**
+ * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
+ * @rate: target clock rate
+ * @opp_id: OPP ID
+ * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
+ *
+ * Operating performance point data.  Can vary by OMAP chip and board.
+ */
+struct omap_opp {
+	unsigned long rate;
+	u8 opp_id;
+	u16 min_vdd;
+};
+
+extern struct omap_opp *mpu_opps;
+extern struct omap_opp *dsp_opps;
+extern struct omap_opp *l3_opps;
+
+/*
+ * agent_id values for use with omap_pm_set_min_bus_tput():
+ *
+ * OCP_INITIATOR_AGENT is only valid for devices that can act as
+ * initiators -- it represents the device's L3 interconnect
+ * connection.  OCP_TARGET_AGENT represents the device's L4
+ * interconnect connection.
+ */
+#define OCP_TARGET_AGENT		1
+#define OCP_INITIATOR_AGENT		2
+
+/**
+ * omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
+ *
+ * Initialize anything that must be configured before the clock
+ * framework starts.  The "_if_" is to avoid name collisions with the
+ * PM idle-loop code.
+ */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+				 struct omap_opp *dsp_opp_table,
+				 struct omap_opp *l3_opp_table);
+
+/**
+ * omap_pm_if_init - OMAP PM init code called after clock fw init
+ *
+ * The main initialization code.  OPP tables are passed in here.  The
+ * "_if_" is to avoid name collisions with the PM idle-loop code.
+ */
+int __init omap_pm_if_init(void);
+
+/**
+ * omap_pm_if_exit - OMAP PM exit code
+ *
+ * Exit code; currently unused.  The "_if_" is to avoid name
+ * collisions with the PM idle-loop code.
+ */
+void omap_pm_if_exit(void);
+
+/*
+ * Device-driver-originated constraints (via board-*.c files, platform_data)
+ */
+
+
+/**
+ * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
+ * @dev: struct device * requesting the constraint
+ * @t: maximum MPU wakeup latency in microseconds
+ *
+ * Request that the maximum interrupt latency for the MPU to be no
+ * greater than 't' microseconds. "Interrupt latency" in this case is
+ * defined as the elapsed time from the occurrence of a hardware or
+ * timer interrupt to the time when the device driver's interrupt
+ * service routine has been entered by the MPU.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the MPU powerdomain into, and
+ * possibly the CORE powerdomain as well, since interrupt handling
+ * code currently runs from SDRAM.  Advanced PM or board*.c code may
+ * also configure interrupt controller priorities, OCP bus priorities,
+ * CPU speed(s), etc.
+ *
+ * This function will not affect device wakeup latency, e.g., time
+ * elapsed from when a device driver enables a hardware device with
+ * clk_enable(), to when the device is ready for register access or
+ * other use.  To control this device wakeup latency, use
+ * set_max_dev_wakeup_lat()
+ *
+ * Multiple calls to set_max_mpu_wakeup_lat() will replace the
+ * previous t value.  To remove the latency target for the MPU, call
+ * with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
+ * @dev: struct device * requesting the constraint
+ * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
+ * @r: minimum throughput (in KiB/s)
+ *
+ * Request that the minimum data throughput on the OCP interconnect
+ * attached to device 'dev' interconnect agent 'tbus_id' be no less
+ * than 'r' KiB/s.
+ *
+ * It is expected that the OMAP PM or bus code will use this
+ * information to set the interconnect clock to run at the lowest
+ * possible speed that satisfies all current system users.  The PM or
+ * bus code will adjust the estimate based on its model of the bus, so
+ * device driver authors should attempt to specify an accurate
+ * quantity for their device use case, and let the PM or bus code
+ * overestimate the numbers as necessary to handle request/response
+ * latency, other competing users on the system, etc.  On OMAP2/3, if
+ * a driver requests a minimum L4 interconnect speed constraint, the
+ * code will also need to add an minimum L3 interconnect speed
+ * constraint,
+ *
+ * Multiple calls to set_min_bus_tput() will replace the previous rate
+ * value for this device.  To remove the interconnect throughput
+ * restriction for this device, call with r = 0.
+ *
+ * No return value.
+ */
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+
+
+/**
+ * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
+ * @dev: struct device *
+ * @t: maximum device wakeup latency in microseconds
+ *
+ * Request that the maximum amount of time necessary for a device to
+ * become accessible after its clocks are enabled should be no greater
+ * than 't' microseconds.  Specifically, this represents the time from
+ * when a device driver enables device clocks with clk_enable(), to
+ * when the register reads and writes on the device will succeed.
+ * This function should be called before clk_disable() is called,
+ * since the power state transition decision may be made during
+ * clk_disable().
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the powerdomain enclosing this
+ * device into.
+ *
+ * Multiple calls to set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the wakeup
+ * latency restriction for this device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
+ * @dev: struct device *
+ * @t: maximum DMA transfer start latency in microseconds
+ *
+ * Request that the maximum system DMA transfer start latency for this
+ * device 'dev' should be no greater than 't' microseconds.  "DMA
+ * transfer start latency" here is defined as the elapsed time from
+ * when a device (e.g., McBSP) requests that a system DMA transfer
+ * start or continue, to the time at which data starts to flow into
+ * that device from the system DMA controller.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the CORE powerdomain into.
+ *
+ * Since system DMA transfers may not involve the MPU, this function
+ * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
+ * so.  Similarly, this function will not affect device wakeup latency
+ * -- use set_max_dev_wakeup_lat() to affect that.
+ *
+ * Multiple calls to set_max_sdma_lat() will replace the previous t
+ * value for this device.  To remove the maximum DMA latency for this
+ * device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+/**
+ * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
+ *
+ * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
+ * frequency entries.  The final item in the array should have .rate =
+ * .opp_id = 0.
+ */
+const struct omap_opp *omap_pm_dsp_get_opp_table(void);
+
+/**
+ * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
+ * @opp_id: target DSP OPP ID
+ *
+ * Set a minimum OPP ID for the DSP.  This is intended to be called
+ * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
+ * information that code receives from the DSP/BIOS load estimator is the
+ * target OPP ID; hence, this interface.  No return value.
+ */
+void omap_pm_dsp_set_min_opp(u8 opp_id);
+
+/**
+ * omap_pm_dsp_get_opp - report the current DSP OPP ID
+ *
+ * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
+ * MPU share a single voltage domain, the OPP ID returned back may
+ * represent a higher DSP speed than the OPP requested via
+ * omap_pm_dsp_set_min_opp().
+ *
+ * Returns the current VDD1 OPP ID, or 0 upon error.
+ */
+u8 omap_pm_dsp_get_opp(void);
+
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+/**
+ * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
+ *
+ * Provide a frequency table usable by CPUFreq for the current chip/board.
+ * Returns a pointer to a struct cpufreq_frequency_table array or NULL
+ * upon error.
+ */
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
+
+/**
+ * omap_pm_cpu_set_freq - set the current minimum MPU frequency
+ * @f: MPU frequency in Hz
+ *
+ * Set the current minimum CPU frequency.  The actual CPU frequency
+ * used could end up higher if the DSP requested a higher OPP.
+ * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
+ * return value.
+ */
+void omap_pm_cpu_set_freq(unsigned long f);
+
+/**
+ * omap_pm_cpu_get_freq - report the current CPU frequency
+ *
+ * Returns the current MPU frequency, or 0 upon error.
+ */
+unsigned long omap_pm_cpu_get_freq(void);
+
+
+/*
+ * Device context loss tracking
+ */
+
+/**
+ * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
+ * @dev: struct device *
+ *
+ * This function returns the number of times that the device @dev has
+ * lost its internal context.  This generally occurs on a powerdomain
+ * transition to OFF.  Drivers use this as an optimization to avoid restoring
+ * context if the device hasn't lost it.  To use, drivers should initially
+ * call this in their context save functions and store the result.  Early in
+ * the driver's context restore function, the driver should call this function
+ * again, and compare the result to the stored counter.  If they differ, the
+ * driver must restore device context.   If the number of context losses
+ * exceeds the maximum positive integer, the function will wrap to 0 and
+ * continue counting.  Returns the number of context losses for this device,
+ * or -EINVAL upon error.
+ */
+int omap_pm_get_dev_context_loss_count(struct device *dev);
+
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
index 15dec7f1c7c0..b3ba5ac7b4a4 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -33,14 +33,14 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
 #define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/mach/omap_device.h
new file mode 100644
index 000000000000..bd0e136db337
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_device.h
@@ -0,0 +1,141 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/omap_hwmod.h>
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN	0
+#define OMAP_DEVICE_STATE_ENABLED	1
+#define OMAP_DEVICE_STATE_IDLE		2
+#define OMAP_DEVICE_STATE_SHUTDOWN	3
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in microseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+	struct platform_device		pdev;
+	struct omap_hwmod		**hwmods;
+	struct omap_device_pm_latency	*pm_lats;
+	u32				dev_wakeup_lat;
+	u32				_dev_wakeup_lat_limit;
+	u8				pm_lats_cnt;
+	s8				pm_lat_level;
+	u8				hwmods_cnt;
+	u8				_state;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+int omap_device_count_resources(struct omap_device *od);
+int omap_device_fill_resources(struct omap_device *od, struct resource *res);
+
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt);
+
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **oh, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt);
+
+int omap_device_register(struct omap_device *od);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+	u32 deactivate_lat;
+	int (*deactivate_func)(struct omap_device *od);
+	u32 activate_lat;
+	int (*activate_func)(struct omap_device *od);
+};
+
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/mach/omap_hwmod.h
new file mode 100644
index 000000000000..1f79c20e2929
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_hwmod.h
@@ -0,0 +1,447 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+
+#include <mach/cpu.h>
+
+struct omap_device;
+
+/* OCP SYSCONFIG bit shifts/masks */
+#define SYSC_MIDLEMODE_SHIFT		12
+#define SYSC_MIDLEMODE_MASK		(0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_CLOCKACTIVITY_SHIFT	8
+#define SYSC_CLOCKACTIVITY_MASK		(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_SIDLEMODE_SHIFT		3
+#define SYSC_SIDLEMODE_MASK		(0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_ENAWAKEUP_SHIFT		2
+#define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_SOFTRESET_SHIFT		1
+#define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT		0
+#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE		(1 << 0)
+#define HWMOD_IDLEMODE_NO		(1 << 1)
+#define HWMOD_IDLEMODE_SMART		(1 << 2)
+
+
+/**
+ * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_ch: DMA channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+	const char	*name;
+	u16		dma_ch;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clkdev_dev_id: opt clock: clkdev dev_id string
+ * @clkdev_con_id: opt clock: clkdev con_id string
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+	const char	*role;
+	const char	*clkdev_dev_id;
+	const char	*clkdev_con_id;
+	struct clk	*_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3		(1 << 0)
+#define OMAP_FIREWALL_L4		(1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+	u8 l3_perm_bit;
+	u8 l4_fw_region;
+	u8 l4_prot_group;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT	(1 << 0)
+#define ADDR_TYPE_RT		(1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure.  GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+	u32 pa_start;
+	u32 pa_end;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod.  Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU			(1 << 0)
+#define OCP_USER_SDMA			(1 << 1)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_HAS_IDLEST		(1 << 0)
+#define OCPIF_SWSUP_IDLE		(1 << 1)
+#define OCPIF_CAN_BURST			(1 << 2)
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clkdev_dev_id: interface clock: clkdev dev_id string
+ * @clkdev_con_id: interface clock: clkdev con_id string
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @addr_cnt: ARRAY_SIZE(@addr)
+ * @width: OCP data width
+ * @thread_cnt: number of threads
+ * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+	struct omap_hwmod		*master;
+	struct omap_hwmod		*slave;
+	struct omap_hwmod_addr_space	*addr;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	union {
+		struct omap_hwmod_omap2_firewall omap2;
+	}				fw;
+	u8				addr_cnt;
+	u8				width;
+	u8				thread_cnt;
+	u8				max_burst_len;
+	u8				user;
+	u8				flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT	2
+#define SLAVE_IDLE_SHIFT	0
+#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE	(1 << 0)
+#define SYSC_HAS_SOFTRESET	(1 << 1)
+#define SYSC_HAS_ENAWAKEUP	(1 << 2)
+#define SYSC_HAS_EMUFREE	(1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
+#define SYSC_HAS_SIDLEMODE	(1 << 5)
+#define SYSC_HAS_MIDLEMODE	(1 << 6)
+#define SYSS_MISSING		(1 << 7)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH	0x0
+#define CLOCKACT_TEST_MAIN	0x1
+#define CLOCKACT_TEST_ICLK	0x2
+#define CLOCKACT_TEST_NONE	0x3
+
+/**
+ * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module.  Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact.  This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ */
+struct omap_hwmod_sysconfig {
+	u16 rev_offs;
+	u16 sysc_offs;
+	u16 syss_offs;
+	u8 idlemodes;
+	u8 sysc_flags;
+	u8 clockact;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers.  In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+	s16 module_offs;
+	u8 prcm_reg_id;
+	u8 module_bit;
+	u8 idlest_reg_id;
+	u8 idlest_idle_bit;
+	u8 idlest_stdby_bit;
+};
+
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
+ * @device_offs: device register offset from @module_offs
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ */
+struct omap_hwmod_omap4_prcm {
+	u32 module_offs;
+	u16 device_offs;
+	u8 submodule_wkdep_bit;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ *     of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ *     of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ *     SDRAM controller, etc.
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ *     controller, etc.
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ */
+#define HWMOD_SWSUP_SIDLE			(1 << 0)
+#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
+#define HWMOD_INIT_NO_RESET			(1 << 2)
+#define HWMOD_INIT_NO_IDLE			(1 << 3)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ */
+#define _HWMOD_NO_MPU_PORT			(1 << 0)
+#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ *              (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN			0
+#define _HWMOD_STATE_REGISTERED			1
+#define _HWMOD_STATE_CLKS_INITED		2
+#define _HWMOD_STATE_INITIALIZED		3
+#define _HWMOD_STATE_ENABLED			4
+#define _HWMOD_STATE_IDLE			5
+#define _HWMOD_STATE_DISABLED			6
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
+ * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @prcm: PRCM data pertaining to this hwmod
+ * @clkdev_dev_id: main clock: clkdev dev_id string
+ * @clkdev_con_id: main clock: clkdev con_id string
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @masters: ptr to array of OCP ifs that this hwmod can initiate on
+ * @slaves: ptr to array of OCP ifs that this hwmod can respond on
+ * @sysconfig: device SYSCONFIG/SYSSTATUS register data
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_rt_va: cached register target start address (internal use)
+ * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
+ * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
+ * @mpu_irqs_cnt: number of @mpu_irqs
+ * @sdma_chs_cnt: number of @sdma_chs
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @flags: hwmod flags (documented below)
+ * @omap_chip: OMAP chips this hwmod is present on
+ * @node: list node for hwmod list (internal use)
+ *
+ * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
+ * clock," which for our purposes is defined as "the functional clock needed
+ * for register accesses to complete."  Modules may not have a main clock if
+ * the interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod {
+	const char			*name;
+	struct omap_device		*od;
+	u8				*mpu_irqs;
+	struct omap_hwmod_dma_info	*sdma_chs;
+	union {
+		struct omap_hwmod_omap2_prcm omap2;
+		struct omap_hwmod_omap4_prcm omap4;
+	}				prcm;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	struct omap_hwmod_opt_clk	*opt_clks;
+	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
+	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
+	struct omap_hwmod_sysconfig	*sysconfig;
+	void				*dev_attr;
+	u32				_sysc_cache;
+	void __iomem			*_rt_va;
+	struct list_head		node;
+	u16				flags;
+	u8				_mpu_port_index;
+	u8				msuspendmux_reg_id;
+	u8				msuspendmux_shift;
+	u8				response_lat;
+	u8				mpu_irqs_cnt;
+	u8				sdma_chs_cnt;
+	u8				opt_clks_cnt;
+	u8				masters_cnt;
+	u8				slaves_cnt;
+	u8				hwmods_cnt;
+	u8				_int_flags;
+	u8				_state;
+	const struct omap_chip_id	omap_chip;
+};
+
+int omap_hwmod_init(struct omap_hwmod **ohs);
+int omap_hwmod_register(struct omap_hwmod *oh);
+int omap_hwmod_unregister(struct omap_hwmod *oh);
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
+int omap_hwmod_late_init(void);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 69c9e675d8ee..6271d8556a40 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -117,6 +117,13 @@ struct powerdomain {
 
 	struct list_head node;
 
+	int state;
+	unsigned state_counter[4];
+
+#ifdef CONFIG_PM_DEBUG
+	s64 timer;
+	s64 state_timer[4];
+#endif
 };
 
 
@@ -126,7 +133,8 @@ int pwrdm_register(struct powerdomain *pwrdm);
 int pwrdm_unregister(struct powerdomain *pwrdm);
 struct powerdomain *pwrdm_lookup(const char *name);
 
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm));
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
@@ -164,4 +172,9 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
 
+int pwrdm_state_switch(struct powerdomain *pwrdm);
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
+int pwrdm_pre_transition(void);
+int pwrdm_post_transition(void);
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 0be18e4ff182..1c09c78a48f2 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -21,19 +21,28 @@
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
 #define SDRC_SYSCONFIG		0x010
+#define SDRC_CS_CFG		0x040
+#define SDRC_SHARING		0x044
+#define SDRC_ERR_TYPE		0x04C
 #define SDRC_DLLA_CTRL		0x060
 #define SDRC_DLLA_STATUS	0x064
 #define SDRC_DLLB_CTRL		0x068
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
+#define SDRC_MCFG_0		0x080
 #define SDRC_MR_0		0x084
+#define SDRC_EMR2_0		0x08c
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MANUAL_0		0x0a8
+#define SDRC_MCFG_1		0x0B0
 #define SDRC_MR_1		0x0B4
+#define SDRC_EMR2_1		0x0BC
 #define SDRC_ACTIM_CTRL_A_1	0x0C4
 #define SDRC_ACTIM_CTRL_B_1	0x0C8
 #define SDRC_RFR_CTRL_1		0x0D4
+#define SDRC_MANUAL_1		0x0D8
 
 /*
  * These values represent the number of memory clock cycles between
@@ -71,11 +80,11 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index def0529c75eb..e249186d26e2 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
+#include <linux/init.h>
+
 #if defined(CONFIG_ARCH_OMAP1)
 /* OMAP1 serial ports */
 #define OMAP_UART1_BASE		0xfffb0000
@@ -53,6 +55,7 @@
 			})
 
 #ifndef __ASSEMBLER__
+extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 9b42d72d96cf..b6defa23e77e 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -30,8 +30,8 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 {
 #ifdef CONFIG_ARCH_OMAP1
 	if (cpu_class_is_omap1()) {
-		if (BETWEEN(p, IO_PHYS, IO_SIZE))
-			return XLATE(p, IO_PHYS, IO_VIRT);
+		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
+			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
 	if (cpu_is_omap730()) {
 		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
@@ -132,3 +132,61 @@ void omap_iounmap(volatile void __iomem *addr)
 		__iounmap(addr);
 }
 EXPORT_SYMBOL(omap_iounmap);
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readb(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readb(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readw(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readw(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readl(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readl(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writew(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writel(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
new file mode 100644
index 000000000000..c799b3b0d709
--- /dev/null
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -0,0 +1,415 @@
+/*
+ * omap iommu: debugfs interface
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+#define MAXCOLUMN 100 /* for short messages */
+
+static DEFINE_MUTEX(iommu_debug_lock);
+
+static struct dentry *iommu_debug_root;
+
+static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	u32 ver = iommu_arch_version();
+	char buf[MAXCOLUMN], *p = buf;
+
+	p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+}
+
+static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	ssize_t bytes;
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	bytes = iommu_dump_ctx(obj, p, count);
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
+
+	mutex_unlock(&iommu_debug_lock);
+	kfree(buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	ssize_t bytes, rest;
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	p += sprintf(p, "%8s %8s\n", "cam:", "ram:");
+	p += sprintf(p, "-----------------------------------------\n");
+	rest = count - (p - buf);
+	p += dump_tlb_entries(obj, p, rest);
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	kfree(buf);
+
+	return bytes;
+}
+
+static ssize_t debug_write_pagetable(struct file *file,
+		     const char __user *userbuf, size_t count, loff_t *ppos)
+{
+	struct iotlb_entry e;
+	struct cr_regs cr;
+	int err;
+	struct iommu *obj = file->private_data;
+	char buf[MAXCOLUMN], *p = buf;
+
+	count = min(count, sizeof(buf));
+
+	mutex_lock(&iommu_debug_lock);
+	if (copy_from_user(p, userbuf, count)) {
+		mutex_unlock(&iommu_debug_lock);
+		return -EFAULT;
+	}
+
+	sscanf(p, "%x %x", &cr.cam, &cr.ram);
+	if (!cr.cam || !cr.ram) {
+		mutex_unlock(&iommu_debug_lock);
+		return -EINVAL;
+	}
+
+	iotlb_cr_to_e(&cr, &e);
+	err = iopgtable_store_entry(obj, &e);
+	if (err)
+		dev_err(obj->dev, "%s: fail to store cr\n", __func__);
+
+	mutex_unlock(&iommu_debug_lock);
+	return count;
+}
+
+#define dump_ioptable_entry_one(lv, da, val)			\
+	({							\
+		int __err = 0;					\
+		ssize_t bytes;					\
+		const int maxcol = 22;				\
+		const char *str = "%d: %08x %08x\n";		\
+		bytes = snprintf(p, maxcol, str, lv, da, val);	\
+		p += bytes;					\
+		len -= bytes;					\
+		if (len < maxcol)				\
+			__err = -ENOMEM;			\
+		__err;						\
+	})
+
+static ssize_t dump_ioptable(struct iommu *obj, char *buf, ssize_t len)
+{
+	int i;
+	u32 *iopgd;
+	char *p = buf;
+
+	spin_lock(&obj->page_table_lock);
+
+	iopgd = iopgd_offset(obj, 0);
+	for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) {
+		int j, err;
+		u32 *iopte;
+		u32 da;
+
+		if (!*iopgd)
+			continue;
+
+		if (!(*iopgd & IOPGD_TABLE)) {
+			da = i << IOPGD_SHIFT;
+
+			err = dump_ioptable_entry_one(1, da, *iopgd);
+			if (err)
+				goto out;
+			continue;
+		}
+
+		iopte = iopte_offset(iopgd, 0);
+
+		for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) {
+			if (!*iopte)
+				continue;
+
+			da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT);
+			err = dump_ioptable_entry_one(2, da, *iopgd);
+			if (err)
+				goto out;
+		}
+	}
+out:
+	spin_unlock(&obj->page_table_lock);
+
+	return p - buf;
+}
+
+static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
+				    size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	size_t bytes;
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	p += sprintf(p, "L: %8s %8s\n", "da:", "pa:");
+	p += sprintf(p, "-----------------------------------------\n");
+
+	mutex_lock(&iommu_debug_lock);
+
+	bytes = PAGE_SIZE - (p - buf);
+	p += dump_ioptable(obj, p, bytes);
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	struct iovm_struct *tmp;
+	int uninitialized_var(i);
+	ssize_t bytes;
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n",
+		     "No", "start", "end", "size", "flags");
+	p += sprintf(p, "-------------------------------------------------\n");
+
+	mutex_lock(&iommu_debug_lock);
+
+	list_for_each_entry(tmp, &obj->mmap, list) {
+		size_t len;
+		const char *str = "%3d %08x-%08x %6x %8x\n";
+		const int maxcol = 39;
+
+		len = tmp->da_end - tmp->da_start;
+		p += snprintf(p, maxcol, str,
+			      i, tmp->da_start, tmp->da_end, len, tmp->flags);
+
+		if (PAGE_SIZE - (p - buf) < maxcol)
+			break;
+		i++;
+	}
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	struct iovm_struct *area;
+	ssize_t bytes;
+
+	count = min_t(ssize_t, count, PAGE_SIZE);
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	area = find_iovm_area(obj, (u32)ppos);
+	if (IS_ERR(area)) {
+		bytes = -EINVAL;
+		goto err_out;
+	}
+	memcpy(p, area->va, count);
+	p += count;
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+err_out:
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	struct iovm_struct *area;
+	char *p, *buf;
+
+	count = min_t(size_t, count, PAGE_SIZE);
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	if (copy_from_user(p, userbuf, count)) {
+		count =  -EFAULT;
+		goto err_out;
+	}
+
+	area = find_iovm_area(obj, (u32)ppos);
+	if (IS_ERR(area)) {
+		count = -EINVAL;
+		goto err_out;
+	}
+	memcpy(area->va, p, count);
+err_out:
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return count;
+}
+
+static int debug_open_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+#define DEBUG_FOPS(name)						\
+	static const struct file_operations debug_##name##_fops = {	\
+		.open = debug_open_generic,				\
+		.read = debug_read_##name,				\
+		.write = debug_write_##name,				\
+	};
+
+#define DEBUG_FOPS_RO(name)						\
+	static const struct file_operations debug_##name##_fops = {	\
+		.open = debug_open_generic,				\
+		.read = debug_read_##name,				\
+	};
+
+DEBUG_FOPS_RO(ver);
+DEBUG_FOPS_RO(regs);
+DEBUG_FOPS_RO(tlb);
+DEBUG_FOPS(pagetable);
+DEBUG_FOPS_RO(mmap);
+DEBUG_FOPS(mem);
+
+#define __DEBUG_ADD_FILE(attr, mode)					\
+	{								\
+		struct dentry *dent;					\
+		dent = debugfs_create_file(#attr, mode, parent,		\
+					   obj, &debug_##attr##_fops);	\
+		if (!dent)						\
+			return -ENOMEM;					\
+	}
+
+#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600)
+#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400)
+
+static int iommu_debug_register(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iommu *obj = platform_get_drvdata(pdev);
+	struct dentry *d, *parent;
+
+	if (!obj || !obj->dev)
+		return -EINVAL;
+
+	d = debugfs_create_dir(obj->name, iommu_debug_root);
+	if (!d)
+		return -ENOMEM;
+	parent = d;
+
+	d = debugfs_create_u8("nr_tlb_entries", 400, parent,
+			      (u8 *)&obj->nr_tlb_entries);
+	if (!d)
+		return -ENOMEM;
+
+	DEBUG_ADD_FILE_RO(ver);
+	DEBUG_ADD_FILE_RO(regs);
+	DEBUG_ADD_FILE_RO(tlb);
+	DEBUG_ADD_FILE(pagetable);
+	DEBUG_ADD_FILE_RO(mmap);
+	DEBUG_ADD_FILE(mem);
+
+	return 0;
+}
+
+static int __init iommu_debug_init(void)
+{
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("iommu", NULL);
+	if (!d)
+		return -ENOMEM;
+	iommu_debug_root = d;
+
+	err = foreach_iommu_device(d, iommu_debug_register);
+	if (err)
+		goto err_out;
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(iommu_debug_root);
+	return err;
+}
+module_init(iommu_debug_init)
+
+static void __exit iommu_debugfs_exit(void)
+{
+	debugfs_remove_recursive(iommu_debug_root);
+}
+module_exit(iommu_debugfs_exit)
+
+MODULE_DESCRIPTION("omap iommu: debugfs interface");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4a0301399013..4b6012707307 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -351,16 +351,14 @@ EXPORT_SYMBOL_GPL(flush_iotlb_all);
 
 #if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
 
-ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
 {
-	ssize_t bytes;
-
 	if (!obj || !buf)
 		return -EINVAL;
 
 	clk_enable(obj->clk);
 
-	bytes = arch_iommu->dump_ctx(obj, buf);
+	bytes = arch_iommu->dump_ctx(obj, buf, bytes);
 
 	clk_disable(obj->clk);
 
@@ -368,7 +366,7 @@ ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
 }
 EXPORT_SYMBOL_GPL(iommu_dump_ctx);
 
-static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
 {
 	int i;
 	struct iotlb_lock saved, l;
@@ -379,7 +377,7 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
 	iotlb_lock_get(obj, &saved);
 	memcpy(&l, &saved, sizeof(saved));
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
+	for (i = 0; i < num; i++) {
 		struct cr_regs tmp;
 
 		iotlb_lock_get(obj, &l);
@@ -402,18 +400,21 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
  * @obj:	target iommu
  * @buf:	output buffer
  **/
-size_t dump_tlb_entries(struct iommu *obj, char *buf)
+size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t bytes)
 {
-	int i, n;
+	int i, num;
 	struct cr_regs *cr;
 	char *p = buf;
 
-	cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+	num = bytes / sizeof(*cr);
+	num = min(obj->nr_tlb_entries, num);
+
+	cr = kcalloc(num, sizeof(*cr), GFP_KERNEL);
 	if (!cr)
 		return 0;
 
-	n = __dump_tlb_entries(obj, cr);
-	for (i = 0; i < n; i++)
+	num = __dump_tlb_entries(obj, cr, num);
+	for (i = 0; i < num; i++)
 		p += iotlb_dump_cr(obj, cr + i, p);
 	kfree(cr);
 
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 2fce2c151a95..6fc52fcbdc03 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -199,7 +199,7 @@ static void *vmap_sg(const struct sg_table *sgt)
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, total);
+	flush_cache_vmap(new->addr, new->addr + total);
 	return new->addr;
 
 err_out:
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
new file mode 100644
index 000000000000..e98f0a2a6c26
--- /dev/null
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -0,0 +1,296 @@
+/*
+ * omap-pm-noop.c - OMAP power management interface - dummy version
+ *
+ * This code implements the OMAP power management interface to
+ * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
+ * debug/demonstration use, as it does nothing but printk() whenever a
+ * function is called (when DEBUG is defined, below)
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order):
+ * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
+ * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+
+/* Interface documentation is in mach/omap-pm.h */
+#include <mach/omap-pm.h>
+
+#include <mach/powerdomain.h>
+
+struct omap_opp *dsp_opps;
+struct omap_opp *mpu_opps;
+struct omap_opp *l3_opps;
+
+/*
+ * Device-driver-originated constraints (via board-*.c files)
+ */
+
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the MPU to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on the MPU and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+{
+	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
+	    agent_id != OCP_TARGET_AGENT)) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min bus tput constraint: "
+			 "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+	else
+		pr_debug("OMAP PM: add min bus tput constraint: "
+			 "dev %s for agent_id %d: rate %ld KiB\n",
+			 dev_name(dev), agent_id, r);
+
+	/*
+	 * This code should model the interconnect and compute the
+	 * required clock frequency, convert that to a VDD2 OPP ID, then
+	 * set the VDD2 OPP appropriately.
+	 *
+	 * TI CDP code can call constraint_set here on the VDD2 OPP.
+	 */
+}
+
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max device latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max device latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the device to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on that powerdomain and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.  Conceivably, this code should also determine
+	 * whether to actually disable the device clocks or not,
+	 * depending on how long it takes to re-enable the clocks.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_max_sdma_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max DMA latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max DMA latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux PM QOS params, this code should scan the
+	 * list of maximum CPU and DMA latencies and select the
+	 * smallest, then set cpu_dma_latency pm_qos_param
+	 * accordingly.
+	 *
+	 * For future Linux PM QOS params, with separate CPU and DMA
+	 * latency params, this code should just set the dma_latency param.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+
+}
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+const struct omap_opp *omap_pm_dsp_get_opp_table(void)
+{
+	pr_debug("OMAP PM: DSP request for OPP table\n");
+
+	/*
+	 * Return DSP frequency table here:  The final item in the
+	 * array should have .rate = .opp_id = 0.
+	 */
+
+	return NULL;
+}
+
+void omap_pm_dsp_set_min_opp(u8 opp_id)
+{
+	if (opp_id == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
+
+	/*
+	 *
+	 * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
+	 * can just test to see which is higher, the CPU's desired OPP
+	 * ID or the DSP's desired OPP ID, and use whichever is
+	 * highest.
+	 *
+	 * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
+	 * rate is keyed on MPU speed, not the OPP ID.  So we need to
+	 * map the OPP ID to the MPU speed for use with clk_set_rate()
+	 * if it is higher than the current OPP clock rate.
+	 *
+	 */
+}
+
+
+u8 omap_pm_dsp_get_opp(void)
+{
+	pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
+
+	/*
+	 * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
+	 *
+	 * CDP12.14+:
+	 * Call clk_get_rate() on the OPP custom clock, map that to an
+	 * OPP ID using the tables defined in board-*.c/chip-*.c files.
+	 */
+
+	return 0;
+}
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
+{
+	pr_debug("OMAP PM: CPUFreq request for frequency table\n");
+
+	/*
+	 * Return CPUFreq frequency table here: loop over
+	 * all VDD1 clkrates, pull out the mpu_ck frequencies, build
+	 * table
+	 */
+
+	return NULL;
+}
+
+void omap_pm_cpu_set_freq(unsigned long f)
+{
+	if (f == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
+		 f);
+
+	/*
+	 * For l-o dev tree, determine whether MPU freq or DSP OPP id
+	 * freq is higher.  Find the OPP ID corresponding to the
+	 * higher frequency.  Call clk_round_rate() and clk_set_rate()
+	 * on the OPP custom clock.
+	 *
+	 * CDP should just be able to set the VDD1 OPP clock rate here.
+	 */
+}
+
+unsigned long omap_pm_cpu_get_freq(void)
+{
+	pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
+
+	/*
+	 * Call clk_get_rate() on the mpu_ck.
+	 */
+
+	return 0;
+}
+
+/*
+ * Device context loss tracking
+ */
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+	if (!dev) {
+		WARN_ON(1);
+		return -EINVAL;
+	};
+
+	pr_debug("OMAP PM: returning context loss count for dev %s\n",
+		 dev_name(dev));
+
+	/*
+	 * Map the device to the powerdomain.  Return the powerdomain
+	 * off counter.
+	 */
+
+	return 0;
+}
+
+
+/* Should be called before clk framework init */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+				 struct omap_opp *dsp_opp_table,
+				 struct omap_opp *l3_opp_table)
+{
+	mpu_opps = mpu_opp_table;
+	dsp_opps = dsp_opp_table;
+	l3_opps = l3_opp_table;
+	return 0;
+}
+
+/* Must be called after clock framework is initialized */
+int __init omap_pm_if_init(void)
+{
+	return 0;
+}
+
+void omap_pm_if_exit(void)
+{
+	/* Deallocate CPUFreq frequency table here */
+}
+
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
new file mode 100644
index 000000000000..2c409fc6dd21
--- /dev/null
+++ b/arch/arm/plat-omap/omap_device.c
@@ -0,0 +1,687 @@
+/*
+ * omap_device implementation
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code provides a consistent interface for OMAP device drivers
+ * to control power management and interconnect properties of their
+ * devices.
+ *
+ * In the medium- to long-term, this code should either be
+ * a) implemented via arch-specific pointers in platform_data
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_data func pointers
+ *
+ *
+ * Guidelines for usage by driver authors:
+ *
+ * 1. These functions are intended to be used by device drivers via
+ * function pointers in struct platform_data.  As an example,
+ * omap_device_enable() should be passed to the driver as
+ *
+ * struct foo_driver_platform_data {
+ * ...
+ *      int (*device_enable)(struct platform_device *pdev);
+ * ...
+ * }
+ *
+ * Note that the generic "device_enable" name is used, rather than
+ * "omap_device_enable".  This is so other architectures can pass in their
+ * own enable/disable functions here.
+ *
+ * This should be populated during device setup:
+ *
+ * ...
+ * pdata->device_enable = omap_device_enable;
+ * ...
+ *
+ * 2. Drivers should first check to ensure the function pointer is not null
+ * before calling it, as in:
+ *
+ * if (pdata->device_enable)
+ *     pdata->device_enable(pdev);
+ *
+ * This allows other architectures that don't use similar device_enable()/
+ * device_shutdown() functions to execute normally.
+ *
+ * ...
+ *
+ * Suggested usage by device drivers:
+ *
+ * During device initialization:
+ * device_enable()
+ *
+ * During device idle:
+ * (save remaining device context if necessary)
+ * device_idle();
+ *
+ * During device resume:
+ * device_enable();
+ * (restore context if necessary)
+ *
+ * During device shutdown:
+ * device_shutdown()
+ * (device must be reinitialized at this point to use it again)
+ *
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/omap_device.h>
+#include <mach/omap_hwmod.h>
+
+/* These parameters are passed to _omap_device_{de,}activate() */
+#define USE_WAKEUP_LAT			0
+#define IGNORE_WAKEUP_LAT		1
+
+/* XXX this should be moved into a separate file */
+#if defined(CONFIG_ARCH_OMAP2420)
+# define OMAP_32KSYNCT_BASE		0x48004000
+#elif defined(CONFIG_ARCH_OMAP2430)
+# define OMAP_32KSYNCT_BASE		0x49020000
+#elif defined(CONFIG_ARCH_OMAP3430)
+# define OMAP_32KSYNCT_BASE		0x48320000
+#else
+# error Unknown OMAP device
+#endif
+
+/* Private functions */
+
+/**
+ * _read_32ksynct - read the OMAP 32K sync timer
+ *
+ * Returns the current value of the 32KiHz synchronization counter.
+ * XXX this should be generalized to simply read the system clocksource.
+ * XXX this should be moved to a separate synctimer32k.c file
+ */
+static u32 _read_32ksynct(void)
+{
+	if (!cpu_class_is_omap2())
+		BUG();
+
+	return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
+}
+
+/**
+ * _omap_device_activate - increase device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: increase to latency target (0) or full readiness (1)?
+ *
+ * Increase readiness of omap_device @od (thus decreasing device
+ * wakeup latency, but consuming more power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is greater than the requested maximum wakeup latency, step
+ * backwards in the omap_device_pm_latency table to ensure the
+ * device's maximum wakeup latency is less than or equal to the
+ * requested maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+{
+	u32 a, b;
+
+	pr_debug("omap_device: %s: activating\n", od->pdev.name);
+
+	while (od->pm_lat_level > 0) {
+		struct omap_device_pm_latency *odpl;
+		int act_lat = 0;
+
+		od->pm_lat_level--;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
+			break;
+
+		a = _read_32ksynct();
+
+		/* XXX check return code */
+		odpl->activate_func(od);
+
+		b = _read_32ksynct();
+
+		act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+		pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
+			 "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+
+		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
+		     "activate step %d took longer than expected (%d > %d)\n",
+		     od->pdev.name, od->pdev.id, od->pm_lat_level,
+		     act_lat, odpl->activate_lat);
+
+		od->dev_wakeup_lat -= odpl->activate_lat;
+	}
+
+	return 0;
+}
+
+/**
+ * _omap_device_deactivate - decrease device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
+ *
+ * Decrease readiness of omap_device @od (thus increasing device
+ * wakeup latency, but conserving power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is less than the requested maximum wakeup latency, step
+ * forwards in the omap_device_pm_latency table to ensure the device's
+ * maximum wakeup latency is less than or equal to the requested
+ * maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+{
+	u32 a, b;
+
+	pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+
+	while (od->pm_lat_level < od->pm_lats_cnt) {
+		struct omap_device_pm_latency *odpl;
+		int deact_lat = 0;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    ((od->dev_wakeup_lat + odpl->activate_lat) >
+		     od->_dev_wakeup_lat_limit))
+			break;
+
+		a = _read_32ksynct();
+
+		/* XXX check return code */
+		odpl->deactivate_func(od);
+
+		b = _read_32ksynct();
+
+		deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+		pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
+			 "%d usec\n", od->pdev.name, od->pm_lat_level,
+			 deact_lat);
+
+		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
+		     "deactivate step %d took longer than expected (%d > %d)\n",
+		     od->pdev.name, od->pdev.id, od->pm_lat_level,
+		     deact_lat, odpl->deactivate_lat);
+
+		od->dev_wakeup_lat += odpl->activate_lat;
+
+		od->pm_lat_level++;
+	}
+
+	return 0;
+}
+
+static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
+{
+	return container_of(pdev, struct omap_device, pdev);
+}
+
+
+/* Public functions for use by core code */
+
+/**
+ * omap_device_count_resources - count number of struct resource entries needed
+ * @od: struct omap_device *
+ *
+ * Count the number of struct resource entries needed for this
+ * omap_device @od.  Used by omap_device_build_ss() to determine how
+ * much memory to allocate before calling
+ * omap_device_fill_resources().  Returns the count.
+ */
+int omap_device_count_resources(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int c = 0;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		c += omap_hwmod_count_resources(oh);
+
+	pr_debug("omap_device: %s: counted %d total resources across %d "
+		 "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+
+	return c;
+}
+
+/**
+ * omap_device_fill_resources - fill in array of struct resource
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the resource data for this omap_device @od.  Used by
+ * omap_device_build_ss() after calling omap_device_count_resources().
+ * Ideally this function would not be needed at all.  If omap_device
+ * replaces platform_device, then we can specify our own
+ * get_resource()/ get_irq()/etc functions that use the underlying
+ * omap_hwmod information.  Or if platform_device is extended to use
+ * subarchitecture-specific function pointers, the various
+ * platform_device functions can simply call omap_device internal
+ * functions to get device resources.  Hacking around the existing
+ * platform_device code wastes memory.  Returns 0.
+ */
+int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+{
+	struct omap_hwmod *oh;
+	int c = 0;
+	int i, r;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) {
+		r = omap_hwmod_fill_resources(oh, res);
+		res += r;
+		c += r;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_device_build - build and register an omap_device with one omap_hwmod
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering a single
+ * omap_device record, which in turn builds and registers a
+ * platform_device record.  See omap_device_build_ss() for more
+ * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
+ * passes along the return value of omap_device_build_ss().
+ */
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt)
+{
+	struct omap_hwmod *ohs[] = { oh };
+
+	if (!oh)
+		return ERR_PTR(-EINVAL);
+
+	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
+				    pdata_len, pm_lats, pm_lats_cnt);
+}
+
+/**
+ * omap_device_build_ss - build and register an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering an omap_device
+ * subsystem record.  Subsystem records consist of multiple
+ * omap_hwmods.  This function in turn builds and registers a
+ * platform_device record.  Returns an ERR_PTR() on error, or passes
+ * along the return value of omap_device_register().
+ */
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **ohs, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt)
+{
+	int ret = -ENOMEM;
+	struct omap_device *od;
+	char *pdev_name2;
+	struct resource *res = NULL;
+	int res_count;
+	struct omap_hwmod **hwmods;
+
+	if (!ohs || oh_cnt == 0 || !pdev_name)
+		return ERR_PTR(-EINVAL);
+
+	if (!pdata && pdata_len > 0)
+		return ERR_PTR(-EINVAL);
+
+	pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
+		 oh_cnt);
+
+	od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+	if (!od)
+		return ERR_PTR(-ENOMEM);
+
+	od->hwmods_cnt = oh_cnt;
+
+	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
+			 GFP_KERNEL);
+	if (!hwmods)
+		goto odbs_exit1;
+
+	memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
+	od->hwmods = hwmods;
+
+	pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
+	if (!pdev_name2)
+		goto odbs_exit2;
+	strcpy(pdev_name2, pdev_name);
+
+	od->pdev.name = pdev_name2;
+	od->pdev.id = pdev_id;
+
+	res_count = omap_device_count_resources(od);
+	if (res_count > 0) {
+		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+		if (!res)
+			goto odbs_exit3;
+	}
+	omap_device_fill_resources(od, res);
+
+	od->pdev.num_resources = res_count;
+	od->pdev.resource = res;
+
+	platform_device_add_data(&od->pdev, pdata, pdata_len);
+
+	od->pm_lats = pm_lats;
+	od->pm_lats_cnt = pm_lats_cnt;
+
+	ret = omap_device_register(od);
+	if (ret)
+		goto odbs_exit4;
+
+	return od;
+
+odbs_exit4:
+	kfree(res);
+odbs_exit3:
+	kfree(pdev_name2);
+odbs_exit2:
+	kfree(hwmods);
+odbs_exit1:
+	kfree(od);
+
+	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
+
+	return ERR_PTR(ret);
+}
+
+/**
+ * omap_device_register - register an omap_device with one omap_hwmod
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure.  This currently just calls
+ * platform_device_register() on the underlying platform_device.
+ * Returns the return value of platform_device_register().
+ */
+int omap_device_register(struct omap_device *od)
+{
+	pr_debug("omap_device: %s: registering\n", od->pdev.name);
+
+	return platform_device_register(&od->pdev);
+}
+
+
+/* Public functions for use by device drivers through struct platform_data */
+
+/**
+ * omap_device_enable - fully activate an omap_device
+ * @od: struct omap_device * to activate
+ *
+ * Do whatever is necessary for the hwmods underlying omap_device @od
+ * to be accessible and ready to operate.  This generally involves
+ * enabling clocks, setting SYSCONFIG registers; and in the future may
+ * involve remuxing pins.  Device drivers should call this function
+ * (through platform_data function pointers) where they would normally
+ * enable clocks, etc.  Returns -EINVAL if called when the omap_device
+ * is already enabled, or passes along the return value of
+ * _omap_device_activate().
+ */
+int omap_device_enable(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+		WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
+		     "invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	/* Enable everything if we're enabling this device from scratch */
+	if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
+		od->pm_lat_level = od->pm_lats_cnt;
+
+	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
+
+	od->dev_wakeup_lat = 0;
+	od->_dev_wakeup_lat_limit = INT_MAX;
+	od->_state = OMAP_DEVICE_STATE_ENABLED;
+
+	return ret;
+}
+
+/**
+ * omap_device_idle - idle an omap_device
+ * @od: struct omap_device * to idle
+ *
+ * Idle omap_device @od by calling as many .deactivate_func() entries
+ * in the omap_device's pm_lats table as is possible without exceeding
+ * the device's maximum wakeup latency limit, pm_lat_limit.  Device
+ * drivers should call this function (through platform_data function
+ * pointers) where they would normally disable clocks after operations
+ * complete, etc..  Returns -EINVAL if the omap_device is not
+ * currently enabled, or passes along the return value of
+ * _omap_device_deactivate().
+ */
+int omap_device_idle(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
+		WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
+		     "invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+
+	od->_state = OMAP_DEVICE_STATE_IDLE;
+
+	return ret;
+}
+
+/**
+ * omap_device_shutdown - shut down an omap_device
+ * @od: struct omap_device * to shut down
+ *
+ * Shut down omap_device @od by calling all .deactivate_func() entries
+ * in the omap_device's pm_lats table and then shutting down all of
+ * the underlying omap_hwmods.  Used when a device is being "removed"
+ * or a device driver is being unloaded.  Returns -EINVAL if the
+ * omap_device is not currently enabled or idle, or passes along the
+ * return value of _omap_device_deactivate().
+ */
+int omap_device_shutdown(struct platform_device *pdev)
+{
+	int ret, i;
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
+	    od->_state != OMAP_DEVICE_STATE_IDLE) {
+		WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
+		     "from invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_shutdown(oh);
+
+	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
+
+	return ret;
+}
+
+/**
+ * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
+ * @od: struct omap_device *
+ *
+ * When a device's maximum wakeup latency limit changes, call some of
+ * the .activate_func or .deactivate_func function pointers in the
+ * omap_device's pm_lats array to ensure that the device's maximum
+ * wakeup latency is less than or equal to the new latency limit.
+ * Intended to be called by OMAP PM code whenever a device's maximum
+ * wakeup latency limit changes (e.g., via
+ * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
+ * done (e.g., if the omap_device is not currently idle, or if the
+ * wakeup latency is already current with the new limit) or passes
+ * along the return value of _omap_device_deactivate() or
+ * _omap_device_activate().
+ */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit)
+{
+	int ret = -EINVAL;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
+		return 0;
+
+	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
+
+	if (od->_state != OMAP_DEVICE_STATE_IDLE)
+		return 0;
+	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
+		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
+		ret = _omap_device_activate(od, USE_WAKEUP_LAT);
+
+	return ret;
+}
+
+/**
+ * omap_device_get_pwrdm - return the powerdomain * associated with @od
+ * @od: struct omap_device *
+ *
+ * Return the powerdomain associated with the first underlying
+ * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
+ * code.  Returns NULL on error or a struct powerdomain * upon
+ * success.
+ */
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
+{
+	/*
+	 * XXX Assumes that all omap_hwmod powerdomains are identical.
+	 * This may not necessarily be true.  There should be a sanity
+	 * check in here to WARN() if any difference appears.
+	 */
+	if (!od->hwmods_cnt)
+		return NULL;
+
+	return omap_hwmod_get_pwrdm(od->hwmods[0]);
+}
+
+/*
+ * Public functions intended for use in omap_device_pm_latency
+ * .activate_func and .deactivate_func function pointers
+ */
+
+/**
+ * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Enable all underlying hwmods.  Returns 0.
+ */
+int omap_device_enable_hwmods(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_enable(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Idle all underlying hwmods.  Returns 0.
+ */
+int omap_device_idle_hwmods(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_idle(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_disable_clocks - disable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Disable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_disable_clocks(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_disable_clocks(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_enable_clocks - enable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Enable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_enable_clocks(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_enable_clocks(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 5eae7876979c..925f64711c37 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -56,16 +56,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0	IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	IO_ADDRESS(0x480022F0)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 7faa2f554ab1..9a01d445eca8 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -342,8 +342,9 @@ config MEM_MT48LC64M4A2FB_7E
 config MEM_MT48LC16M16A2TG_75
 	bool
 	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
-		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-		|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
+		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \
+		|| BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \
+		|| BFIN527_BLUETECHNIX_CM)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -459,7 +460,7 @@ config VCO_MULT
 	default "45" if BFIN533_STAMP
 	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
-	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
+	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
 	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
 	help
@@ -574,8 +575,8 @@ config MAX_VCO_HZ
 	default 400000000 if BF514
 	default 400000000 if BF516
 	default 400000000 if BF518
-	default 600000000 if BF522
-	default 400000000 if BF523
+	default 400000000 if BF522
+	default 600000000 if BF523
 	default 400000000 if BF524
 	default 600000000 if BF525
 	default 400000000 if BF526
@@ -647,7 +648,7 @@ config CYCLES_CLOCKSOURCE
 	  writing the registers will most likely crash the kernel.
 
 config GPTMR0_CLOCKSOURCE
-	bool "Use GPTimer0 as a clocksource (higher rating)"
+	bool "Use GPTimer0 as a clocksource"
 	select BFIN_GPTIMERS
 	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
@@ -917,10 +918,6 @@ comment "Cache Support"
 config BFIN_ICACHE
 	bool "Enable ICACHE"
 	default y
-config BFIN_ICACHE_LOCK
-	bool "Enable Instruction Cache Locking"
-	depends on BFIN_ICACHE
-	default n
 config BFIN_EXTMEM_ICACHEABLE
 	bool "Enable ICACHE for external memory"
 	depends on BFIN_ICACHE
@@ -987,7 +984,7 @@ endchoice
 config BFIN_L2_DCACHEABLE
 	bool "Enable DCACHE for L2 SRAM"
 	depends on BFIN_DCACHE
-	depends on BF54x || BF561
+	depends on (BF54x || BF561) && !SMP
 	default n
 choice
 	prompt "L2 SRAM DCACHE policy"
@@ -995,11 +992,9 @@ choice
 	default BFIN_L2_WRITEBACK
 config BFIN_L2_WRITEBACK
 	bool "Write back"
-	depends on !SMP
 
 config BFIN_L2_WRITETHROUGH
 	bool "Write through"
-	depends on !SMP
 endchoice
 
 
@@ -1154,11 +1149,12 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options"
+	depends on !SMP
+
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on !SMP
 
 choice
 	prompt "Standby Power Saving Mode"
@@ -1246,6 +1242,7 @@ config PM_BFIN_WAKE_GP
 endmenu
 
 menu "CPU Frequency scaling"
+	depends on !SMP
 
 source "drivers/cpufreq/Kconfig"
 
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 1fc4981d486f..87f195ee2e06 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -252,4 +252,10 @@ config ACCESS_CHECK
 
 	  Say N here to disable that check to improve the performance.
 
+config BFIN_ISRAM_SELF_TEST
+	bool "isram boot self tests"
+	default n
+	help
+	  Run some self tests of the isram driver code at boot.
+
 endmenu
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index dcfb4889559a..9905b26009e5 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -358,9 +358,9 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC0
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 48a3a7a9099c..9dc682088023 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -359,9 +359,9 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC0
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index dd8352791daf..77e35d4baf53 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -363,9 +363,9 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC0
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index b3d3cab81cfe..f773ad1155d4 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -400,7 +400,7 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index e39277ea43e8..aef0594e7865 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -66,7 +66,6 @@ extern void program_IAR(void);
 
 extern asmlinkage void lower_to_irq14(void);
 extern asmlinkage void bfin_return_from_exception(void);
-extern asmlinkage void evt14_softirq(void);
 extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
 
@@ -100,11 +99,6 @@ extern unsigned long bfin_sic_iwr[];
 extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
 
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-extern void cache_grab_lock(int way);
-extern void bfin_cache_lock(int way);
-#endif
-
 #endif
 
 #endif				/* _BLACKFIN_H_ */
diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index aaeb4df10d57..c281c6328276 100644
--- a/arch/blackfin/include/asm/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -127,6 +127,7 @@ struct bfin5xx_spi_chip {
 	u32 cs_gpio;
 	/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
 	u16 idle_tx_val;
+	u8 pio_interrupt; /* Enable spi data irq */
 };
 
 #endif /* _SPI_CHANNEL_H_ */
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index c5dacf8f8cf9..d18d16837a6d 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -125,4 +125,48 @@
 #define FAULT_USERSUPV  (1 << 17)
 #define FAULT_CPLBBITS  0x0000ffff
 
-#endif				/* _CPLB_H */
+#ifndef __ASSEMBLY__
+
+static inline void _disable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) & ~mask;
+	/* CSYNC to ensure load store ordering */
+	__builtin_bfin_csync();
+	bfin_write32(mmr, ctrl);
+	__builtin_bfin_ssync();
+}
+static inline void disable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) & ~mask;
+	CSYNC();
+	bfin_write32(mmr, ctrl);
+	SSYNC();
+}
+#define _disable_dcplb() _disable_cplb(DMEM_CONTROL, ENDCPLB)
+#define  disable_dcplb()  disable_cplb(DMEM_CONTROL, ENDCPLB)
+#define _disable_icplb() _disable_cplb(IMEM_CONTROL, ENICPLB)
+#define  disable_icplb()  disable_cplb(IMEM_CONTROL, ENICPLB)
+
+static inline void _enable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) | mask;
+	/* CSYNC to ensure load store ordering */
+	__builtin_bfin_csync();
+	bfin_write32(mmr, ctrl);
+	__builtin_bfin_ssync();
+}
+static inline void enable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) | mask;
+	CSYNC();
+	bfin_write32(mmr, ctrl);
+	SSYNC();
+}
+#define _enable_dcplb()  _enable_cplb(DMEM_CONTROL, ENDCPLB)
+#define  enable_dcplb()   enable_cplb(DMEM_CONTROL, ENDCPLB)
+#define _enable_icplb()  _enable_cplb(IMEM_CONTROL, ENICPLB)
+#define  enable_icplb()   enable_cplb(IMEM_CONTROL, ENICPLB)
+
+#endif		/* __ASSEMBLY__ */
+
+#endif		/* _CPLB_H */
diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h
index 110f1c1f845c..53a762b6fcd2 100644
--- a/arch/blackfin/include/asm/early_printk.h
+++ b/arch/blackfin/include/asm/early_printk.h
@@ -21,8 +21,32 @@
  * GNU General Public License for more details.
  */
 
+
+#ifndef __ASM_EARLY_PRINTK_H__
+#define __ASM_EARLY_PRINTK_H__
+
 #ifdef CONFIG_EARLY_PRINTK
+/* For those that don't include it already */
+#include <linux/console.h>
+
 extern int setup_early_printk(char *);
+extern void enable_shadow_console(void);
+extern int shadow_console_enabled(void);
+extern void mark_shadow_error(void);
+extern void early_shadow_reg(unsigned long reg, unsigned int n);
+extern void early_shadow_write(struct console *con, const char *s,
+	unsigned int n) __attribute__((nonnull(2)));
+#define early_shadow_puts(str) early_shadow_write(NULL, str, strlen(str))
+#define early_shadow_stamp() \
+	do { \
+		early_shadow_puts(__FILE__ " : " __stringify(__LINE__) " ["); \
+		early_shadow_puts(__func__); \
+		early_shadow_puts("]\n"); \
+	} while (0)
 #else
 #define setup_early_printk(fmt) do { } while (0)
+#define enable_shadow_console(fmt)  do { } while (0)
+#define early_shadow_stamp() do { } while (0)
 #endif /* CONFIG_EARLY_PRINTK */
+
+#endif /* __ASM_EARLY_PRINTK_H__ */
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 5a87baf0659d..c823e8ebbfa1 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -23,7 +23,7 @@ typedef unsigned long elf_greg_t;
 #define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
-typedef struct user_bfinfp_struct elf_fpregset_t;
+typedef struct { } elf_fpregset_t;
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
index ec58efc130e6..55b808fced71 100644
--- a/arch/blackfin/include/asm/entry.h
+++ b/arch/blackfin/include/asm/entry.h
@@ -36,6 +36,21 @@
 # define LOAD_IPIPE_IPEND
 #endif
 
+/*
+ * Workaround for anomalies 05000283 and 05000315
+ */
+#if ANOMALY_05000283 || ANOMALY_05000315
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)		\
+	cc = dreg == dreg;				\
+	preg.h = HI(CHIPID);				\
+	preg.l = LO(CHIPID);				\
+	if cc jump 1f;					\
+	dreg.l = W[preg];				\
+1:
+#else
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)
+#endif /* ANOMALY_05000283 || ANOMALY_05000315 */
+
 #ifndef CONFIG_EXACT_HWERR
 /* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
  * otherwise it is a waste of cycles.
@@ -88,17 +103,22 @@
  * As you can see by the code - we actually need to do two SSYNCS - one to
  * make sure the read/writes complete, and another to make sure the hardware
  * error is recognized by the core.
+ *
+ * The extra nop before the SSYNC is to make sure we work around 05000244,
+ * since the 283/315 workaround includes a branch to the end
  */
 #define INTERRUPT_ENTRY(N)						\
-    SSYNC;								\
-    SSYNC;								\
     [--sp] = SYSCFG;							\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
     R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
     P0.L = LO(ILAT);							\
     P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
     R0 = [P0];								\
     CC = BITTST(R0, EVT_IVHW_P);					\
     IF CC JUMP 1f;							\
@@ -118,15 +138,17 @@
     RTI;
 
 #define TIMER_INTERRUPT_ENTRY(N)					\
-    SSYNC;								\
-    SSYNC;								\
     [--sp] = SYSCFG;							\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
     R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
     P0.L = LO(ILAT);							\
     P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
     R0 = [P0];								\
     CC = BITTST(R0, EVT_IVHW_P);					\
     IF CC JUMP 1f;							\
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 8643680f0f78..90c9b400ba6d 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -8,6 +8,6 @@
 #ifndef __ASM_BFIN_FTRACE_H__
 #define __ASM_BFIN_FTRACE_H__
 
-#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call: LINK + CALL */
+#define MCOUNT_INSN_SIZE	6 /* sizeof "[++sp] = rets; call __mcount;" */
 
 #endif
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 87ba9ad399cb..4617ba66278f 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -145,10 +145,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-void __ipipe_stall_root_raw(void);
-
-void __ipipe_unstall_root_raw(void);
-
 void __ipipe_serial_debug(const char *fmt, ...);
 
 asmlinkage void __ipipe_call_irqtail(unsigned long addr);
@@ -234,9 +230,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 #define task_hijacked(p)		0
 #define ipipe_trap_notify(t, r)  	0
 
-#define __ipipe_stall_root_raw()	do { } while (0)
-#define __ipipe_unstall_root_raw()	do { } while (0)
-
 #define ipipe_init_irq_threads()		do { } while (0)
 #define ipipe_start_irq_thread(irq, desc)	0
 
diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
index 139b5208f9d8..7d9e2d3bbede 100644
--- a/arch/blackfin/include/asm/irq_handler.h
+++ b/arch/blackfin/include/asm/irq_handler.h
@@ -17,6 +17,7 @@ asmlinkage void evt_evt10(void);
 asmlinkage void evt_evt11(void);
 asmlinkage void evt_evt12(void);
 asmlinkage void evt_evt13(void);
+asmlinkage void evt_evt14(void);
 asmlinkage void evt_soft_int1(void);
 asmlinkage void evt_system_call(void);
 asmlinkage void init_exception_buff(void);
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index 944e29faae48..040410bb07e1 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -127,17 +127,17 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr,
 	unsigned long idx = page >> 5;
 	unsigned long bit = 1 << (page & 31);
 
-	if (flags & VM_MAYREAD)
+	if (flags & VM_READ)
 		mask[idx] |= bit;
 	else
 		mask[idx] &= ~bit;
 	mask += page_mask_nelts;
-	if (flags & VM_MAYWRITE)
+	if (flags & VM_WRITE)
 		mask[idx] |= bit;
 	else
 		mask[idx] &= ~bit;
 	mask += page_mask_nelts;
-	if (flags & VM_MAYEXEC)
+	if (flags & VM_EXEC)
 		mask[idx] |= bit;
 	else
 		mask[idx] &= ~bit;
diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index b42555c1431c..a6f95695731d 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -50,6 +50,7 @@ struct blackfin_pda {			/* Per-processor Data Area */
 	unsigned long ex_optr;
 	unsigned long ex_buf[4];
 	unsigned long ex_imask;		/* Saved imask from exception */
+	unsigned long ex_ipend;		/* Saved IPEND from exception */
 	unsigned long *ex_stack;	/* Exception stack space */
 
 #ifdef ANOMALY_05000261
@@ -60,6 +61,12 @@ struct blackfin_pda {			/* Per-processor Data Area */
 	unsigned long retx;
 	unsigned long seqstat;
 	unsigned int __nmi_count;	/* number of times NMI asserted on this CPU */
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	unsigned long dcplb_doublefault_addr;
+	unsigned long icplb_doublefault_addr;
+	unsigned long retx_doublefault;
+	unsigned long seqstat_doublefault;
+#endif
 };
 
 extern struct blackfin_pda cpu_pda[];
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 141d9281e4b0..a8ddbc8ed5af 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
 obj-$(CONFIG_STACKTRACE)             += stacktrace.o
 
 # the kgdb test puts code into L2 and without linker
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index b5df9459d6d5..f05d1b99b0ef 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -145,6 +145,7 @@ int main(void)
 	DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf));
 	DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask));
 	DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack));
+	DEFINE(PDA_EXIPEND, offsetof(struct blackfin_pda, ex_ipend));
 #ifdef ANOMALY_05000261
 	DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx));
 #endif
@@ -152,6 +153,12 @@ int main(void)
 	DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr));
 	DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx));
 	DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat));
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	DEFINE(PDA_DF_DCPLB, offsetof(struct blackfin_pda, dcplb_doublefault_addr));
+	DEFINE(PDA_DF_ICPLB, offsetof(struct blackfin_pda, icplb_doublefault_addr));
+	DEFINE(PDA_DF_SEQSTAT, offsetof(struct blackfin_pda, seqstat_doublefault));
+	DEFINE(PDA_DF_RETX, offsetof(struct blackfin_pda, retx_doublefault));
+#endif
 #ifdef CONFIG_SMP
 	/* Inter-core lock (in L2 SRAM) */
 	DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot));
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 9f9b82816652..384868dedac3 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -19,6 +19,7 @@
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/uaccess.h>
+#include <asm/early_printk.h>
 
 /*
  * To make sure we work around 05000119 - we always check DMA_DONE bit,
@@ -146,8 +147,8 @@ EXPORT_SYMBOL(request_dma);
 
 int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data)
 {
-	BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
-	       && channel < MAX_DMA_CHANNELS));
+	BUG_ON(channel >= MAX_DMA_CHANNELS ||
+			dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
 
 	if (callback != NULL) {
 		int ret;
@@ -181,8 +182,8 @@ static void clear_dma_buffer(unsigned int channel)
 void free_dma(unsigned int channel)
 {
 	pr_debug("freedma() : BEGIN \n");
-	BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
-	       && channel < MAX_DMA_CHANNELS));
+	BUG_ON(channel >= MAX_DMA_CHANNELS ||
+			dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
 
 	/* Halt the DMA */
 	disable_dma(channel);
@@ -236,6 +237,7 @@ void blackfin_dma_resume(void)
  */
 void __init blackfin_dma_early_init(void)
 {
+	early_shadow_stamp();
 	bfin_write_MDMA_S0_CONFIG(0);
 	bfin_write_MDMA_S1_CONFIG(0);
 }
@@ -246,6 +248,8 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 	unsigned long src = (unsigned long)psrc;
 	struct dma_register *dst_ch, *src_ch;
 
+	early_shadow_stamp();
+
 	/* We assume that everything is 4 byte aligned, so include
 	 * a basic sanity check
 	 */
@@ -300,6 +304,8 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 
 void __init early_dma_memcpy_done(void)
 {
+	early_shadow_stamp();
+
 	while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
 	       (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
 		continue;
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 6b9446271371..fc4681c0170e 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -722,7 +722,6 @@ void bfin_gpio_pm_hibernate_suspend(void)
 		gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
 		gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
 		gpio_bank_saved[bank].data = gpio_array[bank]->data;
-		gpio_bank_saved[bank].data = gpio_array[bank]->data;
 		gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
 		gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
 	}
diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile
index 7d70d3bf3212..394d0b1b28fe 100644
--- a/arch/blackfin/kernel/cplb-mpu/Makefile
+++ b/arch/blackfin/kernel/cplb-mpu/Makefile
@@ -2,7 +2,7 @@
 # arch/blackfin/kernel/cplb-nompu/Makefile
 #
 
-obj-y := cplbinit.o cacheinit.o cplbmgr.o
+obj-y := cplbinit.o cplbmgr.o
 
 CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
 		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
deleted file mode 100644
index d5a86c3017f7..000000000000
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/cpu.h>
-
-#include <asm/cacheflush.h>
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/cplbinit.h>
-
-#if defined(CONFIG_BFIN_ICACHE)
-void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	SSYNC();
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr);
-		bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data);
-	}
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= IMC | ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	SSYNC();
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr);
-		bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data);
-	}
-
-	ctrl = bfin_read_DMEM_CONTROL();
-
-	/*
-	 *  Anomaly notes:
-	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
-	 *  register, so that the port preferences for DAG0 and DAG1 are set
-	 *  to port B
-	 */
-	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index bcdfe9b0b71f..8e1e9e9e9632 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -22,6 +22,7 @@
 
 #include <asm/blackfin.h>
 #include <asm/cacheflush.h>
+#include <asm/cplb.h>
 #include <asm/cplbinit.h>
 #include <asm/mmu_context.h>
 
@@ -41,46 +42,6 @@ int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
 int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS];
 int nr_cplb_flush[NR_CPUS];
 
-static inline void disable_dcplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl &= ~ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
-static inline void enable_dcplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
-static inline void disable_icplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl &= ~ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
-static inline void enable_icplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
 /*
  * Given the contents of the status register, return the index of the
  * CPLB that caused the fault.
@@ -198,10 +159,10 @@ static noinline int dcplb_miss(unsigned int cpu)
 	dcplb_tbl[cpu][idx].addr = addr;
 	dcplb_tbl[cpu][idx].data = d_data;
 
-	disable_dcplb();
+	_disable_dcplb();
 	bfin_write32(DCPLB_DATA0 + idx * 4, d_data);
 	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
-	enable_dcplb();
+	_enable_dcplb();
 
 	return 0;
 }
@@ -288,10 +249,10 @@ static noinline int icplb_miss(unsigned int cpu)
 	icplb_tbl[cpu][idx].addr = addr;
 	icplb_tbl[cpu][idx].data = i_data;
 
-	disable_icplb();
+	_disable_icplb();
 	bfin_write32(ICPLB_DATA0 + idx * 4, i_data);
 	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
-	enable_icplb();
+	_enable_icplb();
 
 	return 0;
 }
@@ -319,7 +280,7 @@ static noinline int dcplb_protection_fault(unsigned int cpu)
 int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 	switch (cause) {
 	case 0x23:
 		return dcplb_protection_fault(cpu);
@@ -340,19 +301,19 @@ void flush_switched_cplbs(unsigned int cpu)
 	nr_cplb_flush[cpu]++;
 
 	local_irq_save_hw(flags);
-	disable_icplb();
+	_disable_icplb();
 	for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
 		icplb_tbl[cpu][i].data = 0;
 		bfin_write32(ICPLB_DATA0 + i * 4, 0);
 	}
-	enable_icplb();
+	_enable_icplb();
 
-	disable_dcplb();
+	_disable_dcplb();
 	for (i = first_switched_dcplb; i < MAX_CPLBS; i++) {
 		dcplb_tbl[cpu][i].data = 0;
 		bfin_write32(DCPLB_DATA0 + i * 4, 0);
 	}
-	enable_dcplb();
+	_enable_dcplb();
 	local_irq_restore_hw(flags);
 
 }
@@ -385,7 +346,7 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 #endif
 	}
 
-	disable_dcplb();
+	_disable_dcplb();
 	for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
 		dcplb_tbl[cpu][i].addr = addr;
 		dcplb_tbl[cpu][i].data = d_data;
@@ -393,6 +354,6 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 		bfin_write32(DCPLB_ADDR0 + i * 4, addr);
 		addr += PAGE_SIZE;
 	}
-	enable_dcplb();
+	_enable_dcplb();
 	local_irq_restore_hw(flags);
 }
diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile
index 7d70d3bf3212..394d0b1b28fe 100644
--- a/arch/blackfin/kernel/cplb-nompu/Makefile
+++ b/arch/blackfin/kernel/cplb-nompu/Makefile
@@ -2,7 +2,7 @@
 # arch/blackfin/kernel/cplb-nompu/Makefile
 #
 
-obj-y := cplbinit.o cacheinit.o cplbmgr.o
+obj-y := cplbinit.o cplbmgr.o
 
 CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
 		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
deleted file mode 100644
index d5a86c3017f7..000000000000
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/cpu.h>
-
-#include <asm/cacheflush.h>
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/cplbinit.h>
-
-#if defined(CONFIG_BFIN_ICACHE)
-void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	SSYNC();
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr);
-		bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data);
-	}
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= IMC | ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	SSYNC();
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr);
-		bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data);
-	}
-
-	ctrl = bfin_read_DMEM_CONTROL();
-
-	/*
-	 *  Anomaly notes:
-	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
-	 *  register, so that the port preferences for DAG0 and DAG1 are set
-	 *  to port B
-	 */
-	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 685f160a5a36..5d8ad503f82a 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -36,7 +36,7 @@ int first_switched_icplb PDT_ATTR;
 int first_switched_dcplb PDT_ATTR;
 
 struct cplb_boundary dcplb_bounds[9] PDT_ATTR;
-struct cplb_boundary icplb_bounds[7] PDT_ATTR;
+struct cplb_boundary icplb_bounds[9] PDT_ATTR;
 
 int icplb_nr_bounds PDT_ATTR;
 int dcplb_nr_bounds PDT_ATTR;
@@ -167,14 +167,21 @@ void __init generate_cplb_tables_all(void)
 		icplb_bounds[i_i++].data = (reserved_mem_icache_on ?
 					    SDRAM_IGENERIC : SDRAM_INON_CHBL);
 	}
+	/* Addressing hole up to the async bank.  */
+	icplb_bounds[i_i].eaddr = ASYNC_BANK0_BASE;
+	icplb_bounds[i_i++].data = 0;
+	/* ASYNC banks.  */
+	icplb_bounds[i_i].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
+	icplb_bounds[i_i++].data = SDRAM_EBIU;
 	/* Addressing hole up to BootROM.  */
 	icplb_bounds[i_i].eaddr = BOOT_ROM_START;
 	icplb_bounds[i_i++].data = 0;
 	/* BootROM -- largest one should be less than 1 meg.  */
 	icplb_bounds[i_i].eaddr = BOOT_ROM_START + (1 * 1024 * 1024);
 	icplb_bounds[i_i++].data = SDRAM_IGENERIC;
+
 	if (L2_LENGTH) {
-		/* Addressing hole up to L2 SRAM, including the async bank.  */
+		/* Addressing hole up to L2 SRAM.  */
 		icplb_bounds[i_i].eaddr = L2_START;
 		icplb_bounds[i_i++].data = 0;
 		/* L2 SRAM.  */
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index 12b030842fdb..d9ea46c6e41a 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -48,36 +48,13 @@ int nr_cplb_flush[NR_CPUS], nr_dcplb_prot[NR_CPUS];
 #define MGR_ATTR
 #endif
 
-/*
- * We're in an exception handler.  The normal cli nop nop workaround
- * isn't going to do very much, as the only thing that can interrupt
- * us is an NMI, and the cli isn't going to stop that.
- */
-#define NOWA_SSYNC __asm__ __volatile__ ("ssync;")
-
-/* Anomaly handlers provide SSYNCs, so avoid extra if anomaly is present */
-#if ANOMALY_05000125
-
-#define bfin_write_DMEM_CONTROL_SSYNC(v)    bfin_write_DMEM_CONTROL(v)
-#define bfin_write_IMEM_CONTROL_SSYNC(v)    bfin_write_IMEM_CONTROL(v)
-
-#else
-
-#define bfin_write_DMEM_CONTROL_SSYNC(v) \
-    do { NOWA_SSYNC; bfin_write_DMEM_CONTROL(v); NOWA_SSYNC; } while (0)
-#define bfin_write_IMEM_CONTROL_SSYNC(v) \
-    do { NOWA_SSYNC; bfin_write_IMEM_CONTROL(v); NOWA_SSYNC; } while (0)
-
-#endif
-
 static inline void write_dcplb_data(int cpu, int idx, unsigned long data,
 				    unsigned long addr)
 {
-	unsigned long ctrl = bfin_read_DMEM_CONTROL();
-	bfin_write_DMEM_CONTROL_SSYNC(ctrl & ~ENDCPLB);
+	_disable_dcplb();
 	bfin_write32(DCPLB_DATA0 + idx * 4, data);
 	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
-	bfin_write_DMEM_CONTROL_SSYNC(ctrl);
+	_enable_dcplb();
 
 #ifdef CONFIG_CPLB_INFO
 	dcplb_tbl[cpu][idx].addr = addr;
@@ -88,12 +65,10 @@ static inline void write_dcplb_data(int cpu, int idx, unsigned long data,
 static inline void write_icplb_data(int cpu, int idx, unsigned long data,
 				    unsigned long addr)
 {
-	unsigned long ctrl = bfin_read_IMEM_CONTROL();
-
-	bfin_write_IMEM_CONTROL_SSYNC(ctrl & ~ENICPLB);
+	_disable_icplb();
 	bfin_write32(ICPLB_DATA0 + idx * 4, data);
 	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
-	bfin_write_IMEM_CONTROL_SSYNC(ctrl);
+	_enable_icplb();
 
 #ifdef CONFIG_CPLB_INFO
 	icplb_tbl[cpu][idx].addr = addr;
@@ -227,7 +202,7 @@ MGR_ATTR static int dcplb_miss(int cpu)
 MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 	switch (cause) {
 	case VEC_CPLB_I_M:
 		return icplb_miss(cpu);
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 2ab56811841c..931c78b5ea1f 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -27,6 +27,7 @@
 #include <linux/serial_core.h>
 #include <linux/console.h>
 #include <linux/string.h>
+#include <linux/reboot.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <asm/early_printk.h>
@@ -181,6 +182,22 @@ asmlinkage void __init init_early_exception_vectors(void)
 	u32 evt;
 	SSYNC();
 
+	/*
+	 * This starts up the shadow buffer, incase anything crashes before
+	 * setup arch
+	 */
+	mark_shadow_error();
+	early_shadow_puts(linux_banner);
+	early_shadow_stamp();
+
+	if (CPUID != bfin_cpuid()) {
+		early_shadow_puts("Running on wrong machine type, expected");
+		early_shadow_reg(CPUID, 16);
+		early_shadow_puts(", but running on");
+		early_shadow_reg(bfin_cpuid(), 16);
+		early_shadow_puts("\n");
+	}
+
 	/* cannot program in software:
 	 * evt0 - emulation (jtag)
 	 * evt1 - reset
@@ -199,6 +216,7 @@ asmlinkage void __init init_early_exception_vectors(void)
 
 }
 
+__attribute__((__noreturn__))
 asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 {
 	/* This can happen before the uart is initialized, so initialize
@@ -210,10 +228,58 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
 		setup_early_printk(DEFAULT_EARLY_PORT);
 
-	printk(KERN_EMERG "Early panic\n");
-	dump_bfin_mem(fp);
-	show_regs(fp);
-	dump_bfin_trace_buffer();
+	if (!shadow_console_enabled()) {
+		/* crap - we crashed before setup_arch() */
+		early_shadow_puts("panic before setup_arch\n");
+		early_shadow_puts("IPEND:");
+		early_shadow_reg(fp->ipend, 16);
+		if (fp->seqstat & SEQSTAT_EXCAUSE) {
+			early_shadow_puts("\nEXCAUSE:");
+			early_shadow_reg(fp->seqstat & SEQSTAT_EXCAUSE, 8);
+		}
+		if (fp->seqstat & SEQSTAT_HWERRCAUSE) {
+			early_shadow_puts("\nHWERRCAUSE:");
+			early_shadow_reg(
+				(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14, 8);
+		}
+		early_shadow_puts("\nErr @");
+		if (fp->ipend & EVT_EVX)
+			early_shadow_reg(fp->retx, 32);
+		else
+			early_shadow_reg(fp->pc, 32);
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+		early_shadow_puts("\nTrace:");
+		if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+			while (bfin_read_TBUFSTAT() & TBUFCNT) {
+				early_shadow_puts("\nT  :");
+				early_shadow_reg(bfin_read_TBUF(), 32);
+				early_shadow_puts("\n S :");
+				early_shadow_reg(bfin_read_TBUF(), 32);
+			}
+		}
+#endif
+		early_shadow_puts("\nUse bfin-elf-addr2line to determine "
+			"function names\n");
+		/*
+		 * We should panic(), but we can't - since panic calls printk,
+		 * and printk uses memcpy.
+		 * we want to reboot, but if the machine type is different,
+		 * can't due to machine specific reboot sequences
+		 */
+		if (CPUID == bfin_cpuid()) {
+			early_shadow_puts("Trying to restart\n");
+			machine_restart("");
+		}
+
+		early_shadow_puts("Halting, since it is not safe to restart\n");
+		while (1)
+			asm volatile ("EMUEXCPT; IDLE;\n");
+
+	} else {
+		printk(KERN_EMERG "Early panic\n");
+		show_regs(fp);
+		dump_bfin_trace_buffer();
+	}
 
 	panic("Died early");
 }
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index a9cfba9946b5..3f8769b7db54 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -43,8 +43,28 @@
 
 ENTRY(_ret_from_fork)
 #ifdef CONFIG_IPIPE
-	[--sp] = reti; 		/* IRQs on. */
-	SP += 4;
+	/*
+	 * Hw IRQs are off on entry, and we don't want the scheduling tail
+	 * code to starve high priority domains from interrupts while it
+	 * runs. Therefore we first stall the root stage to have the
+	 * virtual interrupt state reflect IMASK.
+	 */
+	p0.l = ___ipipe_root_status;
+	p0.h = ___ipipe_root_status;
+	r4 = [p0];
+	bitset(r4, 0);
+	[p0] = r4;
+	/*
+	 * Then we may enable hw IRQs, allowing preemption from high
+	 * priority domains. schedule_tail() will do local_irq_enable()
+	 * since Blackfin does not define __ARCH_WANT_UNLOCKED_CTXSW, so
+	 * there is no need to unstall the root domain by ourselves
+	 * afterwards.
+	 */
+	p0.l = _bfin_irq_flags;
+	p0.h = _bfin_irq_flags;
+	r4 = [p0];
+	sti r4;
 #endif /* CONFIG_IPIPE */
 	SP += -12;
 	call _schedule_tail;
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
index 6980b7a0615d..76dd4fbcd17a 100644
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -17,8 +17,8 @@
  * only one we can blow away.  With pointer registers, we have P0-P2.
  *
  * Upon entry, the RETS will point to the top of the current profiled
- * function.  And since GCC setup the frame for us, the previous function
- * will be waiting there.  mmmm pie.
+ * function.  And since GCC pushed the previous RETS for us, the previous
+ * function will be waiting there.  mmmm pie.
  */
 ENTRY(__mcount)
 	/* save third function arg early so we can do testing below */
@@ -70,14 +70,14 @@ ENTRY(__mcount)
 	/* setup the tracer function */
 	p0 = r3;
 
-	/* tracer(ulong frompc, ulong selfpc):
-	 *  frompc: the pc that did the call to ...
-	 *  selfpc: ... this location
-	 * the selfpc itself will need adjusting for the mcount call
+	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
+	 *  ip: this point was called by ...
+	 *  parent_ip: ... this function
+	 * the ip itself will need adjusting for the mcount call
 	 */
-	r1 = rets;
-	r0 = [fp + 4];
-	r1 += -MCOUNT_INSN_SIZE;
+	r0 = rets;
+	r1 = [sp + 16];	/* skip the 4 local regs on stack */
+	r0 += -MCOUNT_INSN_SIZE;
 
 	/* call the tracer */
 	call (p0);
@@ -106,9 +106,10 @@ ENTRY(_ftrace_graph_caller)
 	[--sp] = r1;
 	[--sp] = rets;
 
-	r0 = fp;
+	/* prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) */
+	r0 = sp;
 	r1 = rets;
-	r0 += 4;
+	r0 += 16;	/* skip the 4 local regs on stack */
 	r1 += -MCOUNT_INSN_SIZE;
 	call _prepare_ftrace_return;
 
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
index 905bfc40a00b..f2c85ac6f2da 100644
--- a/arch/blackfin/kernel/ftrace.c
+++ b/arch/blackfin/kernel/ftrace.c
@@ -24,7 +24,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth) == -EBUSY)
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth, 0) == -EBUSY)
 		return;
 
 	trace.func = self_addr;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index b8d22034b9a6..5d7382396dc0 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -30,10 +30,10 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/kthread.h>
-#include <asm/unistd.h>
+#include <linux/unistd.h>
+#include <linux/io.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
-#include <asm/io.h>
 
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
@@ -90,6 +90,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
 	struct ipipe_domain *this_domain, *next_domain;
 	struct list_head *head, *pos;
+	struct ipipe_irqdesc *idesc;
 	int m_ack, s = -1;
 
 	/*
@@ -100,17 +101,20 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
 	this_domain = __ipipe_current_domain;
+	idesc = &this_domain->irqs[irq];
 
-	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
+	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &idesc->control)))
 		head = &this_domain->p_link;
 	else {
 		head = __ipipe_pipeline.next;
 		next_domain = list_entry(head, struct ipipe_domain, p_link);
-		if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
-			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+		idesc = &next_domain->irqs[irq];
+		if (likely(test_bit(IPIPE_WIRED_FLAG, &idesc->control))) {
+			if (!m_ack && idesc->acknowledge != NULL)
+				idesc->acknowledge(irq, irq_to_desc(irq));
 			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
-				s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
+				s = __test_and_set_bit(IPIPE_STALL_FLAG,
+						       &p->status);
 			__ipipe_dispatch_wired(next_domain, irq);
 			goto out;
 		}
@@ -121,14 +125,15 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	pos = head;
 	while (pos != &__ipipe_pipeline) {
 		next_domain = list_entry(pos, struct ipipe_domain, p_link);
-		if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
+		idesc = &next_domain->irqs[irq];
+		if (test_bit(IPIPE_HANDLE_FLAG, &idesc->control)) {
 			__ipipe_set_irq_pending(next_domain, irq);
-			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+			if (!m_ack && idesc->acknowledge != NULL) {
+				idesc->acknowledge(irq, irq_to_desc(irq));
 				m_ack = 1;
 			}
 		}
-		if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
+		if (!test_bit(IPIPE_PASS_FLAG, &idesc->control))
 			break;
 		pos = next_domain->p_link.next;
 	}
@@ -159,11 +164,6 @@ out:
 		__clear_bit(IPIPE_STALL_FLAG, &p->status);
 }
 
-int __ipipe_check_root(void)
-{
-	return ipipe_root_domain_p;
-}
-
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
@@ -186,30 +186,6 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 }
 EXPORT_SYMBOL(__ipipe_disable_irqdesc);
 
-void __ipipe_stall_root_raw(void)
-{
-	/*
-	 * This code is called by the ins{bwl} routines (see
-	 * arch/blackfin/lib/ins.S), which are heavily used by the
-	 * network stack. It masks all interrupts but those handled by
-	 * non-root domains, so that we keep decent network transfer
-	 * rates for Linux without inducing pathological jitter for
-	 * the real-time domain.
-	 */
-	__asm__ __volatile__ ("sti %0;" : : "d"(__ipipe_irq_lvmask));
-
-	__set_bit(IPIPE_STALL_FLAG,
-		  &ipipe_root_cpudom_var(status));
-}
-
-void __ipipe_unstall_root_raw(void)
-{
-	__clear_bit(IPIPE_STALL_FLAG,
-		    &ipipe_root_cpudom_var(status));
-
-	__asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags));
-}
-
 int __ipipe_syscall_root(struct pt_regs *regs)
 {
 	struct ipipe_percpu_domain_data *p;
@@ -333,12 +309,29 @@ asmlinkage void __ipipe_sync_root(void)
 
 void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	if (__ipipe_root_domain_p) {
-		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
-			return;
-	}
+	if (__ipipe_root_domain_p &&
+	    test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+		return;
 
 	__ipipe_sync_stage(syncmask);
 }
 
-EXPORT_SYMBOL(show_stack);
+void __ipipe_disable_root_irqs_hw(void)
+{
+	/*
+	 * This code is called by the ins{bwl} routines (see
+	 * arch/blackfin/lib/ins.S), which are heavily used by the
+	 * network stack. It masks all interrupts but those handled by
+	 * non-root domains, so that we keep decent network transfer
+	 * rates for Linux without inducing pathological jitter for
+	 * the real-time domain.
+	 */
+	bfin_sti(__ipipe_irq_lvmask);
+	__set_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+void __ipipe_enable_root_irqs_hw(void)
+{
+	__clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+	bfin_sti(bfin_irq_flags);
+}
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index dbcf3e45cb0b..59fc42dc5d6a 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -54,7 +54,7 @@ void kgdb_l2_test(void)
 
 int kgdb_test(char *name, int len, int count, int z)
 {
-	printk(KERN_DEBUG "kgdb name(%d): %s, %d, %d\n", len, name, count, z);
+	printk(KERN_ALERT "kgdb name(%d): %s, %d, %d\n", len, name, count, z);
 	count = z;
 	return count;
 }
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index d5aee3626688..67fc7a56c865 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -27,6 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#define pr_fmt(fmt) "module %s: " fmt
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
@@ -36,6 +37,7 @@
 #include <linux/kernel.h>
 #include <asm/dma.h>
 #include <asm/cacheflush.h>
+#include <asm/uaccess.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -52,7 +54,7 @@ void module_free(struct module *mod, void *module_region)
 
 /* Transfer the section to the L1 memory */
 int
-module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
+module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			  char *secstrings, struct module *mod)
 {
 	/*
@@ -63,126 +65,119 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 	 * NOTE: this breaks the semantic of mod->arch structure.
 	 */
 	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
-	void *dest = NULL;
+	void *dest;
 
 	for (s = sechdrs; s < sechdrs_end; ++s) {
-		if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
+		const char *shname = secstrings + s->sh_name;
+
+		if (s->sh_size == 0)
+			continue;
+
+		if (!strcmp(".l1.text", shname) ||
+		    (!strcmp(".text", shname) &&
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L1))) {
+
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-				       "module %s: L1 instruction memory allocation failed\n",
-				       mod->name);
+				pr_err("L1 inst memory allocation failed\n",
+					mod->name);
 				return -1;
 			}
 			dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l1.data", shname) ||
+		           (!strcmp(".data", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
+
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
-		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
-			dest = l1_data_sram_alloc(s->sh_size);
+
+		} else if (!strcmp(".l1.bss", shname) ||
+		           (!strcmp(".bss", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
+
+			dest = l1_data_sram_zalloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
-			memset(dest, 0, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) {
+
+		} else if (!strcmp(".l1.data.B", shname)) {
+
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.data_b_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) {
+
+		} else if (!strcmp(".l1.bss.B", shname)) {
+
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.bss_b_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
 			memset(dest, 0, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l2.text", shname) ||
+		           (!strcmp(".text", shname) &&
+		            (hdr->e_flags & EF_BFIN_CODE_IN_L2))) {
+
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.text_l2 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-				       "module %s: L2 SRAM allocation failed\n",
-				       mod->name);
+				pr_err("L2 SRAM allocation failed\n",
+					mod->name);
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l2.data", shname) ||
+		           (!strcmp(".data", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
+
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.data_l2 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L2 SRAM allocation failed\n",
+				pr_err("L2 SRAM allocation failed\n",
 					mod->name);
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
-		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
-			dest = l2_sram_alloc(s->sh_size);
+
+		} else if (!strcmp(".l2.bss", shname) ||
+		           (!strcmp(".bss", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
+
+			dest = l2_sram_zalloc(s->sh_size);
 			mod->arch.bss_l2 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L2 SRAM allocation failed\n",
+				pr_err("L2 SRAM allocation failed\n",
 					mod->name);
 				return -1;
 			}
-			memset(dest, 0, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
+
+		} else
+			continue;
+
+		s->sh_flags &= ~SHF_ALLOC;
+		s->sh_addr = (unsigned long)dest;
 	}
+
 	return 0;
 }
 
@@ -190,7 +185,7 @@ int
 apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
 	       unsigned int symindex, unsigned int relsec, struct module *me)
 {
-	printk(KERN_ERR "module %s: .rel unsupported\n", me->name);
+	pr_err(".rel unsupported\n", me->name);
 	return -ENOEXEC;
 }
 
@@ -205,109 +200,86 @@ apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
 /*            gas does not generate it.                                  */
 /*************************************************************************/
 int
-apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
+apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		   unsigned int symindex, unsigned int relsec,
 		   struct module *mod)
 {
 	unsigned int i;
-	unsigned short tmp;
 	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
-	uint32_t *location32;
-	uint16_t *location16;
-	uint32_t value;
+	unsigned long location, value, size;
+
+	pr_debug("applying relocate section %u to %u\n", mod->name,
+		relsec, sechdrs[relsec].sh_info);
 
-	pr_debug("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
-		location16 =
-		    (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].sh_addr +
-				  rel[i].r_offset);
-		location32 = (uint32_t *) location16;
+		location = sechdrs[sechdrs[relsec].sh_info].sh_addr +
+		           rel[i].r_offset;
+
 		/* This is the symbol it is referring to. Note that all
 		   undefined symbols have been resolved. */
 		sym = (Elf32_Sym *) sechdrs[symindex].sh_addr
 		    + ELF32_R_SYM(rel[i].r_info);
 		value = sym->st_value;
 		value += rel[i].r_addend;
-		pr_debug("location is %x, value is %x type is %d \n",
-			 (unsigned int) location32, value,
-			 ELF32_R_TYPE(rel[i].r_info));
+
 #ifdef CONFIG_SMP
-		if ((unsigned long)location16 >= COREB_L1_DATA_A_START) {
-			printk(KERN_ERR "module %s: cannot relocate in L1: %u (SMP kernel)",
-				       mod->name, ELF32_R_TYPE(rel[i].r_info));
+		if (location >= COREB_L1_DATA_A_START) {
+			pr_err("cannot relocate in L1: %u (SMP kernel)",
+				mod->name, ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
 #endif
+
+		pr_debug("location is %lx, value is %lx type is %d\n",
+			mod->name, location, value, ELF32_R_TYPE(rel[i].r_info));
+
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
+		case R_BFIN_HUIMM16:
+			value >>= 16;
+		case R_BFIN_LUIMM16:
+		case R_BFIN_RIMM16:
+			size = 2;
+			break;
+		case R_BFIN_BYTE4_DATA:
+			size = 4;
+			break;
+
 		case R_BFIN_PCREL24:
 		case R_BFIN_PCREL24_JUMP_L:
-			/* Add the value, subtract its postition */
-			location16 =
-			    (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].
-					  sh_addr + rel[i].r_offset - 2);
-			location32 = (uint32_t *) location16;
-			value -= (uint32_t) location32;
-			value >>= 1;
-			if ((value & 0xFF000000) != 0 &&
-			    (value & 0xFF000000) != 0xFF000000) {
-				printk(KERN_ERR "module %s: relocation overflow\n",
-				       mod->name);
-				return -ENOEXEC;
-			}
-			pr_debug("value is %x, before %x-%x after %x-%x\n", value,
-			       *location16, *(location16 + 1),
-			       (*location16 & 0xff00) | (value >> 16 & 0x00ff),
-			       value & 0xffff);
-			*location16 =
-			    (*location16 & 0xff00) | (value >> 16 & 0x00ff);
-			*(location16 + 1) = value & 0xffff;
-			break;
 		case R_BFIN_PCREL12_JUMP:
 		case R_BFIN_PCREL12_JUMP_S:
-			value -= (uint32_t) location32;
-			value >>= 1;
-			*location16 = (value & 0xfff);
-			break;
 		case R_BFIN_PCREL10:
-			value -= (uint32_t) location32;
-			value >>= 1;
-			*location16 = (value & 0x3ff);
-			break;
-		case R_BFIN_LUIMM16:
-			pr_debug("before %x after %x\n", *location16,
-				       (value & 0xffff));
-			tmp = (value & 0xffff);
-			if ((unsigned long)location16 >= L1_CODE_START) {
-				dma_memcpy(location16, &tmp, 2);
-			} else
-				*location16 = tmp;
-			break;
-		case R_BFIN_HUIMM16:
-			pr_debug("before %x after %x\n", *location16,
-				       ((value >> 16) & 0xffff));
-			tmp = ((value >> 16) & 0xffff);
-			if ((unsigned long)location16 >= L1_CODE_START) {
-				dma_memcpy(location16, &tmp, 2);
-			} else
-				*location16 = tmp;
+			pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
+				mod->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+
+		default:
+			pr_err("unknown relocation: %u\n", mod->name,
+				ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+
+		switch (bfin_mem_access_type(location, size)) {
+		case BFIN_MEM_ACCESS_CORE:
+		case BFIN_MEM_ACCESS_CORE_ONLY:
+			memcpy((void *)location, &value, size);
 			break;
-		case R_BFIN_RIMM16:
-			*location16 = (value & 0xffff);
+		case BFIN_MEM_ACCESS_DMA:
+			dma_memcpy((void *)location, &value, size);
 			break;
-		case R_BFIN_BYTE4_DATA:
-			pr_debug("before %x after %x\n", *location32, value);
-			*location32 = value;
+		case BFIN_MEM_ACCESS_ITEST:
+			isram_memcpy((void *)location, &value, size);
 			break;
 		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       mod->name, ELF32_R_TYPE(rel[i].r_info));
+			pr_err("invalid relocation for %#lx\n",
+				mod->name, location);
 			return -ENOEXEC;
 		}
 	}
+
 	return 0;
 }
 
@@ -332,22 +304,28 @@ module_finalize(const Elf_Ehdr * hdr,
 	for (i = 1; i < hdr->e_shnum; i++) {
 		const char *strtab = (char *)sechdrs[strindex].sh_addr;
 		unsigned int info = sechdrs[i].sh_info;
+		const char *shname = secstrings + sechdrs[i].sh_name;
 
 		/* Not a valid relocation section? */
 		if (info >= hdr->e_shnum)
 			continue;
 
-		if ((sechdrs[i].sh_type == SHT_RELA) &&
-		    ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
-		    (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
-		    ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
-			(hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
+		/* Only support RELA relocation types */
+		if (sechdrs[i].sh_type != SHT_RELA)
+			continue;
+
+		if (!strcmp(".rela.l2.text", shname) ||
+		    !strcmp(".rela.l1.text", shname) ||
+		    (!strcmp(".rela.text", shname) &&
+			 (hdr->e_flags & (EF_BFIN_CODE_IN_L1 | EF_BFIN_CODE_IN_L2)))) {
+
 			err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
 					   symindex, i, mod);
 			if (err < 0)
 				return -ENOEXEC;
 		}
 	}
+
 	return 0;
 }
 
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 9da36bab7ccb..f5b286189647 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -282,25 +282,19 @@ void finish_atomic_sections (struct pt_regs *regs)
 {
 	int __user *up0 = (int __user *)regs->p0;
 
-	if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END)
-		return;
-
 	switch (regs->pc) {
 	case ATOMIC_XCHG32 + 2:
 		put_user(regs->r1, up0);
-		regs->pc += 2;
+		regs->pc = ATOMIC_XCHG32 + 4;
 		break;
 
 	case ATOMIC_CAS32 + 2:
 	case ATOMIC_CAS32 + 4:
 		if (regs->r0 == regs->r1)
+	case ATOMIC_CAS32 + 6:
 			put_user(regs->r2, up0);
 		regs->pc = ATOMIC_CAS32 + 8;
 		break;
-	case ATOMIC_CAS32 + 6:
-		put_user(regs->r2, up0);
-		regs->pc += 2;
-		break;
 
 	case ATOMIC_ADD32 + 2:
 		regs->r0 = regs->r1 + regs->r0;
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 6a387eec6b65..30f4828277ad 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -206,6 +206,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
 	unsigned long __user *datap = (unsigned long __user *)data;
+	void *paddr = (void *)addr;
 
 	switch (request) {
 		/* when I and D space are separate, these will need to be fixed. */
@@ -215,42 +216,49 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_PEEKTEXT:	/* read word at location addr. */
 		{
 			unsigned long tmp = 0;
-			int copied;
+			int copied = 0, to_copy = sizeof(tmp);
 
 			ret = -EIO;
-			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %ld\n", addr, sizeof(data));
-			if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
+			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %i\n", addr, to_copy);
+			if (is_user_addr_valid(child, addr, to_copy) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-			if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start()
-			    && addr + sizeof(tmp) <= get_l1_code_start() + L1_CODE_LENGTH) {
-				safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
-			    && addr + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
-			    && addr + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else if (addr >= FIXED_CODE_START
-			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
-				copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else
+			switch (bfin_mem_access_type(addr, to_copy)) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
 				copied = access_process_vm(child, addr, &tmp,
-							   sizeof(tmp), 0);
+				                           to_copy, 0);
+				if (copied)
+					break;
+
+				/* hrm, why didn't that work ... maybe no mapping */
+				if (addr >= FIXED_CODE_START &&
+				    addr + to_copy <= FIXED_CODE_END) {
+					copy_from_user_page(0, 0, 0, &tmp, paddr, to_copy);
+					copied = to_copy;
+				} else if (addr >= BOOT_ROM_START) {
+					memcpy(&tmp, paddr, to_copy);
+					copied = to_copy;
+				}
 
-			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
-			if (copied != sizeof(tmp))
 				break;
-			ret = put_user(tmp, datap);
+			case BFIN_MEM_ACCESS_DMA:
+				if (safe_dma_memcpy(&tmp, paddr, to_copy))
+					copied = to_copy;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(&tmp, paddr, to_copy))
+					copied = to_copy;
+				break;
+			default:
+				copied = 0;
+				break;
+			}
+
+			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
+			if (copied == to_copy)
+				ret = put_user(tmp, datap);
 			break;
 		}
 
@@ -277,9 +285,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				tmp = child->mm->start_data;
 #ifdef CONFIG_BINFMT_ELF_FDPIC
 			} else if (addr == (sizeof(struct pt_regs) + 12)) {
-				tmp = child->mm->context.exec_fdpic_loadmap;
+				goto case_PTRACE_GETFDPIC_EXEC;
 			} else if (addr == (sizeof(struct pt_regs) + 16)) {
-				tmp = child->mm->context.interp_fdpic_loadmap;
+				goto case_PTRACE_GETFDPIC_INTERP;
 #endif
 			} else {
 				tmp = get_reg(child, addr);
@@ -288,49 +296,78 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	case PTRACE_GETFDPIC: {
+		unsigned long tmp = 0;
+
+		switch (addr) {
+		case_PTRACE_GETFDPIC_EXEC:
+		case PTRACE_GETFDPIC_EXEC:
+			tmp = child->mm->context.exec_fdpic_loadmap;
+			break;
+		case_PTRACE_GETFDPIC_INTERP:
+		case PTRACE_GETFDPIC_INTERP:
+			tmp = child->mm->context.interp_fdpic_loadmap;
+			break;
+		default:
+			break;
+		}
+
+		ret = put_user(tmp, datap);
+		break;
+	}
+#endif
+
 		/* when I and D space are separate, this will have to be fixed. */
 	case PTRACE_POKEDATA:
 		pr_debug("ptrace: PTRACE_PEEKDATA\n");
 		/* fall through */
 	case PTRACE_POKETEXT:	/* write the word at location addr. */
 		{
-			int copied;
+			int copied = 0, to_copy = sizeof(data);
 
 			ret = -EIO;
-			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %ld bytes %lx\n",
-			         addr, sizeof(data), data);
-			if (is_user_addr_valid(child, addr, sizeof(data)) < 0)
+			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %i bytes %lx\n",
+			         addr, to_copy, data);
+			if (is_user_addr_valid(child, addr, to_copy) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-			if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start()
-			    && addr + sizeof(data) <= get_l1_code_start() + L1_CODE_LENGTH) {
-				safe_dma_memcpy ((void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
-			    && addr + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy((void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
-			    && addr + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy((void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else if (addr >= FIXED_CODE_START
-			    && addr + sizeof(data) <= FIXED_CODE_END) {
-				copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else
+			switch (bfin_mem_access_type(addr, to_copy)) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
 				copied = access_process_vm(child, addr, &data,
-							   sizeof(data), 1);
+				                           to_copy, 0);
+				if (copied)
+					break;
+
+				/* hrm, why didn't that work ... maybe no mapping */
+				if (addr >= FIXED_CODE_START &&
+				    addr + to_copy <= FIXED_CODE_END) {
+					copy_to_user_page(0, 0, 0, paddr, &data, to_copy);
+					copied = to_copy;
+				} else if (addr >= BOOT_ROM_START) {
+					memcpy(paddr, &data, to_copy);
+					copied = to_copy;
+				}
 
-			pr_debug("ptrace: copied size %d\n", copied);
-			if (copied != sizeof(data))
 				break;
-			ret = 0;
+			case BFIN_MEM_ACCESS_DMA:
+				if (safe_dma_memcpy(paddr, &data, to_copy))
+					copied = to_copy;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(paddr, &data, to_copy))
+					copied = to_copy;
+				break;
+			default:
+				copied = 0;
+				break;
+			}
+
+			pr_debug("ptrace: copied size %d\n", copied);
+			if (copied == to_copy)
+				ret = 0;
 			break;
 		}
 
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6225edae488e..369535b61ed1 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -112,7 +112,7 @@ void __cpuinit bfin_setup_caches(unsigned int cpu)
 	/*
 	 * In cache coherence emulation mode, we need to have the
 	 * D-cache enabled before running any atomic operation which
-	 * might invove cache invalidation (i.e. spinlock, rwlock).
+	 * might involve cache invalidation (i.e. spinlock, rwlock).
 	 * So printk's are deferred until then.
 	 */
 #ifdef CONFIG_BFIN_ICACHE
@@ -187,6 +187,8 @@ void __init bfin_relocate_l1_mem(void)
 	unsigned long l1_data_b_length;
 	unsigned long l2_length;
 
+	early_shadow_stamp();
+
 	/*
 	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
 	 * we know that everything about l1 text/data is nice and aligned,
@@ -511,6 +513,7 @@ static __init void memory_setup(void)
 #ifdef CONFIG_MTD_UCLINUX
 	unsigned long mtd_phys = 0;
 #endif
+	unsigned long max_mem;
 
 	_rambase = (unsigned long)_stext;
 	_ramstart = (unsigned long)_end;
@@ -520,7 +523,22 @@ static __init void memory_setup(void)
 		panic("DMA region exceeds memory limit: %lu.",
 			_ramend - _ramstart);
 	}
-	memory_end = _ramend - DMA_UNCACHED_REGION;
+	max_mem = memory_end = _ramend - DMA_UNCACHED_REGION;
+
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
+	/* Due to a Hardware Anomaly we need to limit the size of usable
+	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+	 */
+# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+	if (max_mem >= 56 * 1024 * 1024)
+		max_mem = 56 * 1024 * 1024;
+# else
+	if (max_mem >= 60 * 1024 * 1024)
+		max_mem = 60 * 1024 * 1024;
+# endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
+#endif				/* ANOMALY_05000263 */
+
 
 #ifdef CONFIG_MPU
 	/* Round up to multiple of 4MB */
@@ -549,22 +567,16 @@ static __init void memory_setup(void)
 
 # if defined(CONFIG_ROMFS_FS)
 	if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
-	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
+	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) {
 		mtd_size =
 		    PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-#  if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
-	/* Due to a Hardware Anomaly we need to limit the size of usable
-	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
-	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
-	 */
-#   if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
-	if (memory_end >= 56 * 1024 * 1024)
-		memory_end = 56 * 1024 * 1024;
-#   else
-	if (memory_end >= 60 * 1024 * 1024)
-		memory_end = 60 * 1024 * 1024;
-#   endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
-#  endif				/* ANOMALY_05000263 */
+
+		/* ROM_FS is XIP, so if we found it, we need to limit memory */
+		if (memory_end > max_mem) {
+			pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20);
+			memory_end = max_mem;
+		}
+	}
 # endif				/* CONFIG_ROMFS_FS */
 
 	/* Since the default MTD_UCLINUX has no magic number, we just blindly
@@ -586,20 +598,14 @@ static __init void memory_setup(void)
 	}
 #endif				/* CONFIG_MTD_UCLINUX */
 
-#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
-	/* Due to a Hardware Anomaly we need to limit the size of usable
-	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
-	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+	/* We need lo limit memory, since everything could have a text section
+	 * of userspace in it, and expose anomaly 05000263. If the anomaly
+	 * doesn't exist, or we don't need to - then dont.
 	 */
-#if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
-	if (memory_end >= 56 * 1024 * 1024)
-		memory_end = 56 * 1024 * 1024;
-#else
-	if (memory_end >= 60 * 1024 * 1024)
-		memory_end = 60 * 1024 * 1024;
-#endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
-	printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
-#endif				/* ANOMALY_05000263 */
+	if (memory_end > max_mem) {
+		pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20);
+		memory_end = max_mem;
+	}
 
 #ifdef CONFIG_MPU
 	page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
@@ -693,7 +699,7 @@ static __init void setup_bootmem_allocator(void)
 	sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
 	print_memory_map("boot memmap");
 
-	/* intialize globals in linux/bootmem.h */
+	/* initialize globals in linux/bootmem.h */
 	find_min_max_pfn();
 	/* pfn of the last usable page frame */
 	if (max_pfn > memory_end >> PAGE_SHIFT)
@@ -806,6 +812,8 @@ void __init setup_arch(char **cmdline_p)
 {
 	unsigned long sclk, cclk;
 
+	enable_shadow_console();
+
 	/* Check to make sure we are running on the right processor */
 	if (unlikely(CPUID != bfin_cpuid()))
 		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
@@ -1230,57 +1238,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #ifdef __ARCH_SYNC_CORE_ICACHE
 	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
 #endif
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-	switch ((cpudata->imemctl >> 3) & WAYALL_L) {
-	case WAY0_L:
-		seq_printf(m, "Way0 Locked-Down\n");
-		break;
-	case WAY1_L:
-		seq_printf(m, "Way1 Locked-Down\n");
-		break;
-	case WAY01_L:
-		seq_printf(m, "Way0,Way1 Locked-Down\n");
-		break;
-	case WAY2_L:
-		seq_printf(m, "Way2 Locked-Down\n");
-		break;
-	case WAY02_L:
-		seq_printf(m, "Way0,Way2 Locked-Down\n");
-		break;
-	case WAY12_L:
-		seq_printf(m, "Way1,Way2 Locked-Down\n");
-		break;
-	case WAY012_L:
-		seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
-		break;
-	case WAY3_L:
-		seq_printf(m, "Way3 Locked-Down\n");
-		break;
-	case WAY03_L:
-		seq_printf(m, "Way0,Way3 Locked-Down\n");
-		break;
-	case WAY13_L:
-		seq_printf(m, "Way1,Way3 Locked-Down\n");
-		break;
-	case WAY013_L:
-		seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
-		break;
-	case WAY32_L:
-		seq_printf(m, "Way3,Way2 Locked-Down\n");
-		break;
-	case WAY320_L:
-		seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
-		break;
-	case WAY321_L:
-		seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
-		break;
-	case WAYALL_L:
-		seq_printf(m, "All Ways are locked\n");
-		break;
-	default:
-		seq_printf(m, "No Ways are locked\n");
-	}
-#endif
 
 	if (cpu_num != num_possible_cpus() - 1)
 		return 0;
@@ -1346,6 +1303,7 @@ const struct seq_operations cpuinfo_op = {
 
 void __init cmdline_init(const char *r0)
 {
+	early_shadow_stamp();
 	if (r0)
 		strncpy(command_line, r0, COMMAND_LINE_SIZE);
 }
diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c
new file mode 100644
index 000000000000..8b8c7107a162
--- /dev/null
+++ b/arch/blackfin/kernel/shadow_console.c
@@ -0,0 +1,113 @@
+/*
+ * manage a small early shadow of the log buffer which we can pass between the
+ * bootloader so early crash messages are communicated properly and easily
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <asm/blackfin.h>
+#include <asm/irq_handler.h>
+#include <asm/early_printk.h>
+
+#define SHADOW_CONSOLE_START		(0x500)
+#define SHADOW_CONSOLE_END		(0x1000)
+#define SHADOW_CONSOLE_MAGIC_LOC	(0x4F0)
+#define SHADOW_CONSOLE_MAGIC		(0xDEADBEEF)
+
+static __initdata char *shadow_console_buffer = (char *)SHADOW_CONSOLE_START;
+
+__init void early_shadow_write(struct console *con, const char *s,
+				unsigned int n)
+{
+	unsigned int i;
+	/*
+	 * save 2 bytes for the double null at the end
+	 * once we fail on a long line, make sure we don't write a short line afterwards
+	 */
+	if ((shadow_console_buffer + n) <= (char *)(SHADOW_CONSOLE_END - 2)) {
+		/* can't use memcpy - it may not be relocated yet */
+		for (i = 0; i <= n; i++)
+			shadow_console_buffer[i] = s[i];
+		shadow_console_buffer += n;
+		shadow_console_buffer[0] = 0;
+		shadow_console_buffer[1] = 0;
+	} else
+		shadow_console_buffer = (char *)SHADOW_CONSOLE_END;
+}
+
+static __initdata struct console early_shadow_console = {
+	.name = "early_shadow",
+	.write = early_shadow_write,
+	.flags = CON_BOOT | CON_PRINTBUFFER,
+	.index = -1,
+	.device = 0,
+};
+
+__init int shadow_console_enabled(void)
+{
+	return early_shadow_console.flags & CON_ENABLED;
+}
+
+__init void mark_shadow_error(void)
+{
+	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
+	loc[0] = SHADOW_CONSOLE_MAGIC;
+	loc[1] = SHADOW_CONSOLE_START;
+}
+
+__init void enable_shadow_console(void)
+{
+	if (!shadow_console_enabled()) {
+		register_console(&early_shadow_console);
+		/* for now, assume things are going to fail */
+		mark_shadow_error();
+	}
+}
+
+static __init int disable_shadow_console(void)
+{
+	/*
+	 * by the time pure_initcall runs, the standard console is enabled,
+	 * and the early_console is off, so unset the magic numbers
+	 * unregistering the console is taken care of in common code (See
+	 * ./kernel/printk:disable_boot_consoles() )
+	 */
+	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
+
+	loc[0] = 0;
+
+	return 0;
+}
+pure_initcall(disable_shadow_console);
+
+/*
+ * since we can't use printk, dump numbers (as hex), n = # bits
+ */
+__init void early_shadow_reg(unsigned long reg, unsigned int n)
+{
+	/*
+	 * can't use any "normal" kernel features, since thay
+	 * may not be relocated to their execute address yet
+	 */
+	int i;
+	char ascii[11] = " 0x";
+
+	n = n / 4;
+	reg = reg << ((8 - n) * 4);
+	n += 3;
+
+	for (i = 3; i <= n ; i++) {
+		ascii[i] = hex_asc_lo(reg >> 28);
+		reg <<= 4;
+	}
+	early_shadow_write(NULL, ascii, n);
+
+}
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 0791eba40d9f..f9715764383e 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -66,7 +66,7 @@ static cycle_t bfin_read_cycles(struct clocksource *cs)
 
 static struct clocksource bfin_cs_cycles = {
 	.name		= "bfin_cs_cycles",
-	.rating		= 350,
+	.rating		= 400,
 	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.shift		= 22,
@@ -115,7 +115,7 @@ static cycle_t bfin_read_gptimer0(void)
 
 static struct clocksource bfin_cs_gptimer0 = {
 	.name		= "bfin_cs_gptimer0",
-	.rating		= 400,
+	.rating		= 350,
 	.read		= bfin_read_gptimer0,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 22,
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index bf2b2d1f8ae5..56464cb8edf3 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -100,7 +100,11 @@ static void decode_address(char *buf, unsigned long address)
 	char *modname;
 	char *delim = ":";
 	char namebuf[128];
+#endif
+
+	buf += sprintf(buf, "<0x%08lx> ", address);
 
+#ifdef CONFIG_KALLSYMS
 	/* look up the address and see if we are in kernel space */
 	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
 
@@ -108,23 +112,33 @@ static void decode_address(char *buf, unsigned long address)
 		/* yeah! kernel space! */
 		if (!modname)
 			modname = delim = "";
-		sprintf(buf, "<0x%p> { %s%s%s%s + 0x%lx }",
-		              (void *)address, delim, modname, delim, symname,
-		              (unsigned long)offset);
+		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
+		        delim, modname, delim, symname,
+		        (unsigned long)offset);
 		return;
-
 	}
 #endif
 
-	/* Problem in fixed code section? */
 	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
-		sprintf(buf, "<0x%p> /* Maybe fixed code section */", (void *)address);
+		/* Problem in fixed code section? */
+		strcat(buf, "/* Maybe fixed code section */");
+		return;
+
+	} else if (address < CONFIG_BOOT_LOAD) {
+		/* Problem somewhere before the kernel start address */
+		strcat(buf, "/* Maybe null pointer? */");
+		return;
+
+	} else if (address >= COREMMR_BASE) {
+		strcat(buf, "/* core mmrs */");
 		return;
-	}
 
-	/* Problem somewhere before the kernel start address */
-	if (address < CONFIG_BOOT_LOAD) {
-		sprintf(buf, "<0x%p> /* Maybe null pointer? */", (void *)address);
+	} else if (address >= SYSMMR_BASE) {
+		strcat(buf, "/* system mmrs */");
+		return;
+
+	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
+		strcat(buf, "/* on-chip L1 ROM */");
 		return;
 	}
 
@@ -172,18 +186,16 @@ static void decode_address(char *buf, unsigned long address)
 						offset = (address - vma->vm_start) +
 							 (vma->vm_pgoff << PAGE_SHIFT);
 
-					sprintf(buf, "<0x%p> [ %s + 0x%lx ]",
-						(void *)address, name, offset);
+					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
 				} else
-					sprintf(buf, "<0x%p> [ %s vma:0x%lx-0x%lx]",
-						(void *)address, name,
-						vma->vm_start, vma->vm_end);
+					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
+						name, vma->vm_start, vma->vm_end);
 
 				if (!in_atomic)
 					mmput(mm);
 
-				if (!strlen(buf))
-					sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
+				if (buf[0] == '\0')
+					sprintf(buf, "[ %s ] dynamic memory", name);
 
 				goto done;
 			}
@@ -193,7 +205,7 @@ static void decode_address(char *buf, unsigned long address)
 	}
 
 	/* we were unable to find this address anywhere */
-	sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
+	sprintf(buf, "/* kernel dynamic memory */");
 
 done:
 	write_unlock_irqrestore(&tasklist_lock, flags);
@@ -215,14 +227,14 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	printk(KERN_EMERG "Double Fault\n");
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
-		unsigned int cpu = smp_processor_id();
+		unsigned int cpu = raw_smp_processor_id();
 		char buf[150];
-		decode_address(buf, cpu_pda[cpu].retx);
+		decode_address(buf, cpu_pda[cpu].retx_doublefault);
 		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
-			(unsigned int)cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE, buf);
-		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
+			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
 		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
 		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
 
 		decode_address(buf, fp->retx);
@@ -245,13 +257,13 @@ static int kernel_mode_regs(struct pt_regs *regs)
 	return regs->ipend & 0xffc0;
 }
 
-asmlinkage void trap_c(struct pt_regs *fp)
+asmlinkage notrace void trap_c(struct pt_regs *fp)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int j;
 #endif
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 #endif
 	const char *strerror = NULL;
 	int sig = 0;
@@ -267,11 +279,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	 * double faults if the stack has become corrupt
 	 */
 
-#ifndef CONFIG_KGDB
-	/* IPEND is skipped if KGDB isn't enabled (see entry code) */
-	fp->ipend = bfin_read_IPEND();
-#endif
-
 	/* trap_c() will be called for exceptions. During exceptions
 	 * processing, the pc value should be set with retx value.
 	 * With this change we can cleanup some code in signal.c- TODO
@@ -404,7 +411,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	/* 0x23 - Data CPLB protection violation, handled here */
 	case VEC_CPLB_VL:
 		info.si_code = ILL_CPLB_VI;
-		sig = SIGBUS;
+		sig = SIGSEGV;
 		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
@@ -904,7 +911,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 		frame_no = 0;
 
 		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		     addr <= endstack; addr++, i++) {
+		     addr < endstack; addr++, i++) {
 
 			ret_addr = 0;
 			if (!j && i % 8 == 0)
@@ -949,6 +956,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	}
 #endif
 }
+EXPORT_SYMBOL(show_stack);
 
 void dump_stack(void)
 {
@@ -1090,7 +1098,7 @@ void show_regs(struct pt_regs *fp)
 	struct irqaction *action;
 	unsigned int i;
 	unsigned long flags = 0;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
 	verbose_printk(KERN_NOTICE "\n");
@@ -1116,10 +1124,16 @@ void show_regs(struct pt_regs *fp)
 
 	verbose_printk(KERN_NOTICE "%s", linux_banner);
 
-	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
-		       print_tainted());
-	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		       (long)fp->seqstat, fp->ipend, fp->syscfg);
+	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
+		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
+	if (fp->ipend & EVT_IRPTEN)
+		verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
+			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
+		verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
+		verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
 			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index d7ffe299b979..21ac7c26079e 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -221,7 +221,7 @@ SECTIONS
 		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
-	ASSERT (SIZEOF(.data_a_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
+	ASSERT (SIZEOF(.data_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
 
 	.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
 	{
@@ -262,7 +262,7 @@ SECTIONS
 		. = ALIGN(4);
 		__ebss_l2 = .;
 	}
-	ASSERT (SIZEOF(.text_data_l1) <= L2_LENGTH, "L2 overflow!")
+	ASSERT (SIZEOF(.text_data_l2) <= L2_LENGTH, "L2 overflow!")
 
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index 1863a6ba507c..3edbd8db6598 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -16,7 +16,7 @@
 	[--sp] = rets; \
 	[--sp] = (P5:0); \
 	sp += -12; \
-	call ___ipipe_stall_root_raw; \
+	call ___ipipe_disable_root_irqs_hw; \
 	sp += 12; \
 	(P5:0) = [sp++];
 # define CLI_INNER_NOP
@@ -28,7 +28,7 @@
 #ifdef CONFIG_IPIPE
 # define DO_STI \
 	sp += -12; \
-	call ___ipipe_unstall_root_raw; \
+	call ___ipipe_enable_root_irqs_hw; \
 	sp += 12; \
 2:	rets = [sp++];
 #else
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 809be268e42d..03e4a9941f01 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -199,15 +199,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -296,24 +287,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
@@ -539,7 +512,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 753ed810e1c6..e9c65390edd1 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -124,6 +124,7 @@
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000389 (0)
 #define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000447 (0)
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index e8e14c2769ed..83421d393148 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -68,11 +68,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
 #define BFIN_UART_NR_PORTS	2
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -88,11 +83,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index b09484f538f4..08a3f01c9886 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -151,46 +151,6 @@ static struct platform_device musb_device = {
 };
 #endif
 
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition ezkit_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezkit_flash_data = {
-	.width      = 2,
-	.parts      = ezkit_partitions,
-	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
-};
-
-static struct resource ezkit_flash_resource = {
-	.start = 0x20000000,
-	.end   = 0x201fffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezkit_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezkit_flash_resource,
-};
-#endif
-
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
@@ -275,6 +235,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -293,6 +261,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -300,10 +271,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB804,
+		.end	= 0x203FB804 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
@@ -479,13 +455,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -493,15 +462,6 @@ static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -568,22 +528,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -594,24 +545,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
@@ -689,6 +622,55 @@ static struct platform_device bfin_fb_adv7393_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PH9, GPIO_PG11 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -796,13 +778,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-		.type = "pcf8574_lcd",
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.type = "pcf8574_keypad",
 		.irq = IRQ_PF8,
 	},
 #endif
@@ -876,7 +856,7 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
-static struct platform_device *stamp_devices[] __initdata = {
+static struct platform_device *cmbf527_devices[] __initdata = {
 
 	&bfin_dpmc,
 
@@ -959,8 +939,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-	&ezkit_flash_device,
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
 #endif
 
 	&bfin_gpios_device,
@@ -971,7 +951,7 @@ static int __init cm_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	platform_add_devices(cmbf527_devices, ARRAY_SIZE(cmbf527_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 2ad68cd10ae6..68b4c804364c 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -263,15 +263,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -376,24 +367,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
@@ -596,7 +569,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 75e563d3f9d4..2849b09abe99 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -292,6 +292,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -310,6 +318,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -501,13 +512,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -515,15 +519,6 @@ static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -614,22 +609,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -641,24 +627,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
@@ -863,7 +831,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index c438ca89d8c9..3f9052687fa8 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file should be up to date with:
- *  - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List
  *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
@@ -176,7 +176,7 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
-/* USB DMA Short Packet Data Corruption */
+/* USB DMA Mode 1 Short Packet Data Corruption */
 #define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
@@ -186,12 +186,20 @@
 #define ANOMALY_05000456 (1)
 /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
 #define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
 /* USB Rx DMA hang */
 #define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (1)
 /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
 #define ANOMALY_05000467 (1)
+/* PLL Latches Incorrect Settings During Reset */
+#define ANOMALY_05000469 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -238,6 +246,7 @@
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 03665a8e16be..ea9cb0fef8bc 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -56,11 +56,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
 #define BFIN_UART_NR_PORTS	2
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -76,11 +71,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 38cf8ffd6d74..6c2b47fe4fe4 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -88,6 +88,14 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -190,15 +201,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x1c04,
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
@@ -229,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 16,
 		.bus_num = 1,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
@@ -237,23 +239,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias	 = "fxs-spi",
-		.max_speed_hz	 = 4,
-		.bus_num	 = 1,
-		.chip_select	 = 3,
-		.controller_data = &spi_si3xxx_chip_info,
-	},
-
-	{
-		.modalias	 = "fxo-spi",
-		.max_speed_hz	 = 4,
-		.bus_num	 = 1,
-		.chip_select	 = 2,
-		.controller_data = &spi_si3xxx_chip_info,
-	},
-#endif
 };
 
 /* SPI (0) */
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 9ecdc361fa6d..8208d67e2c97 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -48,6 +48,14 @@ static struct platform_device rtc_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -66,6 +74,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 1443e92d8b62..7443b26c80c5 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -31,8 +31,10 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
@@ -130,7 +132,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
@@ -141,9 +143,9 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 5,
+		.chip_select = 1,
 		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -195,6 +197,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.start = 0x20200300,
@@ -211,6 +221,43 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x20308000,
+		.end = 0x20308000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF8,
+		.end = IRQ_PF8,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 #endif
 
@@ -324,6 +371,68 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF6,
+		.end = IRQ_PF6,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux+rootfs(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
+
+
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -382,10 +491,22 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 	&smc91x_device,
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+	&smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&para_flash_device,
+#endif
+
 	&bfin_gpios_device,
 };
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 4e3e511bf146..fd518e383b79 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -67,6 +67,14 @@ static struct platform_device bfin_fb_adv7393_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -84,6 +92,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -263,7 +274,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 3d743ccaff6a..729fd7c26336 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -35,6 +35,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
@@ -62,6 +63,14 @@ static struct platform_device rtc_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -80,6 +89,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -207,19 +219,38 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
 };
 #endif
 
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin5xx_spi_chip spidev_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+static int bfin_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+		"mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+	.init = bfin_mmc_spi_init,
+	.exit = bfin_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 8,
+	.pio_interrupt = 0,
 };
 #endif
 
@@ -250,33 +281,14 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
-		.max_speed_hz = 31250000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "ad1836",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -286,6 +298,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = &bfin_mmc_spi_pdata,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -458,7 +481,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = 39,
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
index 0a6eb8f24d98..7a443c37fb9f 100644
--- a/arch/blackfin/mach-bf533/dma.c
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -76,12 +76,12 @@ int channel2irq(unsigned int channel)
 		ret_irq = IRQ_SPI;
 		break;
 
-	case CH_UART_RX:
-		ret_irq = IRQ_UART_RX;
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
 		break;
 
-	case CH_UART_TX:
-		ret_irq = IRQ_UART_TX;
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
 		break;
 
 	case CH_MEM_STREAM0_SRC:
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 4062e24e759b..6965b4088c44 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -131,11 +131,11 @@ struct bfin_serial_res {
 struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC00400,
-	IRQ_UART_RX,
-	IRQ_UART_ERROR,
+	IRQ_UART0_RX,
+	IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART_TX,
-	CH_UART_RX,
+	CH_UART0_TX,
+	CH_UART0_RX,
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index 39aa175f19f5..499e897a4f4f 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -43,13 +43,6 @@
 
 #define BFIN_UART_NR_PORTS      1
 
-#define CH_UART_RX CH_UART0_RX
-#define CH_UART_TX CH_UART0_TX
-
-#define IRQ_UART_ERROR IRQ_UART0_ERROR
-#define IRQ_UART_RX    IRQ_UART0_RX
-#define IRQ_UART_TX    IRQ_UART0_TX
-
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
 #define OFFSET_RBR              0x00	/* Receive Buffer register              */
 #define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 77c59da87e85..44132fda63be 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -9,11 +9,17 @@ config BFIN537_STAMP
 	help
 	  BF537-STAMP board support.
 
-config BFIN537_BLUETECHNIX_CM
-	bool "Bluetechnix CM-BF537"
+config BFIN537_BLUETECHNIX_CM_E
+	bool "Bluetechnix CM-BF537E"
 	depends on (BF537)
 	help
-	  CM-BF537 support for EVAL- and DEV-Board.
+	  CM-BF537E support for EVAL- and DEV-Board.
+
+config BFIN537_BLUETECHNIX_CM_U
+	bool "Bluetechnix CM-BF537U"
+	depends on (BF537)
+	help
+	  CM-BF537U support for EVAL- and DEV-Board.
 
 config BFIN537_BLUETECHNIX_TCM
 	bool "Bluetechnix TCM-BF537"
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 68b98a7af6a6..7e6aa4e5b205 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,8 @@
 #
 
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
-obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_E) += cm_bf537e.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_U) += cm_bf537u.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
new file mode 100644
index 000000000000..87acb7dd2df3
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -0,0 +1,727 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
+ * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537E";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG13,
+		.end = IRQ_PG13,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537e_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+	&hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init cm_bf537e_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf537e_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index 2a87d1cfcd06..8219dc3d65bd 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -1,5 +1,5 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
+ * File:         arch/blackfin/mach-bf537/boards/cm_bf537u.c
  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
  * Author:       Aidan Williams <aidan@nicta.com.au>
  *
@@ -45,11 +45,12 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <linux/spi/mmc_spi.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "Bluetechnix CM BF537";
+const char bfin_board_name[] = "Bluetechnix CM BF537U";
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
@@ -101,13 +102,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -142,7 +136,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
@@ -150,16 +144,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -223,6 +207,14 @@ static struct platform_device hitachi_fb_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.start = 0x20200300,
@@ -240,6 +232,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -324,7 +319,7 @@ static struct mtd_partition cm_partitions[] = {
 		.offset = 0,
 	}, {
 		.name   = "linux kernel(nor)",
-		.size   = 0xE0000,
+		.size   = 0x100000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name   = "file system(nor)",
@@ -339,7 +334,7 @@ static struct physmap_flash_data cm_flash_data = {
 	.nr_parts = ARRAY_SIZE(cm_partitions),
 };
 
-static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+static unsigned cm_flash_gpios[] = { GPIO_PH0 };
 
 static struct resource cm_flash_resource[] = {
 	{
@@ -548,7 +543,7 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
-static struct platform_device *cm_bf537_devices[] __initdata = {
+static struct platform_device *cm_bf537u_devices[] __initdata = {
 
 	&bfin_dpmc,
 
@@ -614,10 +609,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init cm_bf537_init(void)
+static int __init cm_bf537u_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+	platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
@@ -628,7 +623,7 @@ static int __init cm_bf537_init(void)
 	return 0;
 }
 
-arch_initcall(cm_bf537_init);
+arch_initcall(cm_bf537u_init);
 
 void bfin_get_ether_addr(char *addr)
 {
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 838240f151f5..10b35b838bac 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -92,6 +92,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -282,13 +293,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -348,22 +352,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index bd656907b8c0..9db6b40743e0 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -171,6 +171,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -189,6 +197,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -196,10 +207,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB804,
+		.end	= 0x203FB804 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
@@ -516,19 +532,135 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+	.cs_gpio = GPIO_PF5,
+};
+#endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
+
+static struct ad714x_slider_plat slider_plat[] = {
+	{
+		.start_stage = 0,
+		.end_stage = 7,
+		.max_coord = 128,
+	},
+};
+
+static struct ad714x_button_plat button_plat[] = {
+	{
+		.keycode = BTN_FORWARD,
+		.l_mask = 0,
+		.h_mask = 0x600,
+	},
+	{
+		.keycode = BTN_LEFT,
+		.l_mask = 0,
+		.h_mask = 0x500,
+	},
+	{
+		.keycode = BTN_MIDDLE,
+		.l_mask = 0,
+		.h_mask = 0x800,
+	},
+	{
+		.keycode = BTN_RIGHT,
+		.l_mask = 0x100,
+		.h_mask = 0x400,
+	},
+	{
+		.keycode = BTN_BACK,
+		.l_mask = 0x200,
+		.h_mask = 0x400,
+	},
+};
+static struct ad714x_platform_data ad7147_platfrom_data = {
+	.slider_num = 1,
+	.button_num = 5,
+	.slider = slider_plat,
+	.button = button_plat,
+	.stage_cfg_reg =  {
+		{0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
+		{0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
+	},
+	.sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
+};
+#endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct ad714x_button_plat button_plat[] = {
+	{
+		.keycode = BTN_1,
+		.l_mask = 0,
+		.h_mask = 0x1,
+	},
+	{
+		.keycode = BTN_2,
+		.l_mask = 0,
+		.h_mask = 0x2,
+	},
+	{
+		.keycode = BTN_3,
+		.l_mask = 0,
+		.h_mask = 0x4,
+	},
+	{
+		.keycode = BTN_4,
+		.l_mask = 0x0,
+		.h_mask = 0x8,
+	},
+};
+static struct ad714x_platform_data ad7142_platfrom_data = {
+	.button_num = 4,
+	.button = button_plat,
+	.stage_cfg_reg =  {
+		/* fixme: figure out right setting for all comoponent according
+		 * to hardware feature of EVAL-AD7142EB board */
+		{0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+	},
+	.sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
+};
 #endif
 
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
@@ -555,15 +687,7 @@ static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
+	.pio_interrupt = 0,
 };
 #endif
 
@@ -743,25 +867,42 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
 		.controller_data = &ad1836_spi_chip_info,
+		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
 	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "ad1938",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
+		.chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.controller_data = &ad1938_spi_chip_info,
+		.mode = SPI_MODE_3,
 	},
 #endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+	{
+		.modalias = "ad714x_captouch",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF4,
+		.bus_num = 0,
+		.chip_select = 5,
+		.mode = SPI_MODE_3,
+		.platform_data = &ad7147_platfrom_data,
+		.controller_data = &ad7147_spi_chip_info,
+	},
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -773,24 +914,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
@@ -864,6 +987,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -1089,7 +1217,7 @@ static struct platform_device i2c_bfin_twi_device = {
 
 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
 #include <linux/input.h>
-#include <linux/i2c/adp5588_keys.h>
+#include <linux/i2c/adp5588.h>
 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
 	[0]	 = KEY_GRAVE,
 	[1]	 = KEY_1,
@@ -1309,11 +1437,20 @@ static struct adp5520_platform_data adp5520_pdev_data = {
 
 #endif
 
+#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+#include <linux/i2c/adp5588.h>
+static struct adp5588_gpio_platfrom_data adp5588_gpio_data = {
+	.gpio_start = 50,
+	.pullup_dis_mask = 0,
+};
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
 	{
-		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
+		I2C_BOARD_INFO("ad7142_captouch", 0x2C),
 		.irq = IRQ_PG5,
+		.platform_data = (void *)&ad7142_platfrom_data,
 	},
 #endif
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
@@ -1321,7 +1458,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PG6,
@@ -1355,6 +1492,12 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adxl34x_info,
 	},
 #endif
+#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+	{
+		I2C_BOARD_INFO("adp5588-gpio", 0x34),
+		.platform_data = (void *)&adp5588_gpio_data,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1456,6 +1599,13 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -1561,6 +1711,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&stamp_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
 };
 
 static int __init stamp_init(void)
@@ -1572,11 +1726,6 @@ static int __init stamp_init(void)
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
-	 && defined(PATA_INT)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
-
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index e523e6e610d0..61353f7bcb9e 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -45,6 +45,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <linux/spi/mmc_spi.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -101,13 +102,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -142,7 +136,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
@@ -150,22 +144,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 5,
+		.chip_select = 1,
 		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -223,6 +207,14 @@ static struct platform_device hitachi_fb_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.start = 0x20200300,
@@ -240,6 +232,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -285,12 +280,12 @@ static struct platform_device isp1362_hcd_device = {
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 static struct resource net2272_bfin_resources[] = {
 	{
-		.start = 0x20200000,
-		.end = 0x20200000 + 0x100,
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = IRQ_PH14,
-		.end = IRQ_PH14,
+		.start = IRQ_PG13,
+		.end = IRQ_PG13,
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
@@ -324,7 +319,7 @@ static struct mtd_partition cm_partitions[] = {
 		.offset = 0,
 	}, {
 		.name   = "linux kernel(nor)",
-		.size   = 0xE0000,
+		.size   = 0x100000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name   = "file system(nor)",
diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c
index 81185051de91..d23fc0edf2b9 100644
--- a/arch/blackfin/mach-bf537/dma.c
+++ b/arch/blackfin/mach-bf537/dma.c
@@ -96,12 +96,12 @@ int channel2irq(unsigned int channel)
 		ret_irq = IRQ_SPI;
 		break;
 
-	case CH_UART_RX:
-		ret_irq = IRQ_UART_RX;
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
 		break;
 
-	case CH_UART_TX:
-		ret_irq = IRQ_UART_TX;
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
 		break;
 
 	case CH_MEM_STREAM0_SRC:
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index e66aa131f517..f091ad2d8ea8 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -143,7 +143,7 @@
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 2)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index f5e5015ad831..9ee8834c8f1a 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -45,96 +45,11 @@
 #if !defined(__ASSEMBLY__)
 #include "cdefBF534.h"
 
-/* UART 0*/
-#define bfin_read_UART_THR() bfin_read_UART0_THR()
-#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
-#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
-#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define bfin_read_UART_IER() bfin_read_UART0_IER()
-#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
-#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
-#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
-#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
-#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
-#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
-#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
-#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-
 #if defined(CONFIG_BF537) || defined(CONFIG_BF536)
 #include "cdefBF537.h"
 #endif
 #endif
 
-/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */
-
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
-/* DMA Channel */
-#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
-#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
-#define CH_UART_RX CH_UART0_RX
-#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX()
-#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val)
-#define CH_UART_TX CH_UART0_TX
-
-/* System Interrupt Controller */
-#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX()
-#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val)
-#define IRQ_UART_RX IRQ_UART0_RX
-#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX()
-#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val)
-#define	IRQ_UART_TX IRQ_UART0_TX
-#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR()
-#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val)
-#define	IRQ_UART_ERROR IRQ_UART0_ERROR
-
-/* MMR Registers*/
-#define bfin_read_UART_THR() bfin_read_UART0_THR()
-#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define BFIN_UART_THR UART0_THR
-#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
-#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define BFIN_UART_RBR UART0_RBR
-#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
-#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define BFIN_UART_DLL UART0_DLL
-#define bfin_read_UART_IER() bfin_read_UART0_IER()
-#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define BFIN_UART_IER UART0_IER
-#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
-#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define BFIN_UART_DLH UART0_DLH
-#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
-#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define BFIN_UART_IIR UART0_IIR
-#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
-#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define BFIN_UART_LCR UART0_LCR
-#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
-#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define BFIN_UART_MCR UART0_MCR
-#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
-#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define BFIN_UART_LSR UART0_LSR
-#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
-#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define BFIN_UART_SCR  UART0_SCR
-#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
-#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-#define BFIN_UART_GCTL UART0_GCTL
-
 #define BFIN_UART_NR_PORTS	2
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -150,11 +65,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 57695b4c3c09..f2ac3b0ebf24 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -31,6 +31,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -177,6 +178,14 @@ static struct platform_device bfin_sir2_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -194,6 +203,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -390,6 +402,11 @@ static struct resource bfin_spi2_resource[] = {
 	[1] = {
 		.start = CH_SPI2,
 		.end   = CH_SPI2,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI2,
+		.end   = IRQ_SPI2,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -550,6 +567,50 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x180000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	.end   = 0x202fffff,
+#else
+	.end   = 0x203fffff,
+#endif
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
 static struct platform_device *cm_bf538_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -598,6 +659,10 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 
 	&bfin_gpios_device,
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device,
+#endif
 };
 
 static int __init ezkit_init(void)
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index 451cf8a82a42..26b76083e14c 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -113,7 +113,7 @@
 /* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */
 #define ANOMALY_05000375 (__SILICON_REVISION__ < 4)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 3)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 9496196ac164..5ecee1690957 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -47,11 +47,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
 #define BFIN_UART_NR_PORTS	3
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -67,11 +62,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 99ca3f4305e2..1de67515dc9d 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -1310,6 +1310,7 @@
 #define bfin_write_PPI_CONTROL(val)    bfin_write16(PPI_CONTROL, val)
 #define bfin_read_PPI_STATUS()         bfin_read16(PPI_STATUS)
 #define bfin_write_PPI_STATUS(val)     bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS()        bfin_read_PPI_STATUS()
 #define bfin_read_PPI_DELAY()          bfin_read16(PPI_DELAY)
 #define bfin_write_PPI_DELAY(val)      bfin_write16(PPI_DELAY, val)
 #define bfin_read_PPI_COUNT()          bfin_read16(PPI_COUNT)
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index f5a3c30a41bd..e565aae11d72 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -291,6 +291,8 @@ static struct platform_device bfin_sir3_device = {
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
 static struct resource smsc911x_resources[] = {
 	{
 		.name = "smsc911x-memory",
@@ -304,11 +306,22 @@ static struct resource smsc911x_resources[] = {
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
 static struct platform_device smsc911x_device = {
 	.name = "smsc911x",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smsc911x_resources),
 	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 #endif
 
@@ -473,7 +486,7 @@ static struct mtd_partition para_partitions[] = {
 		.offset     = 0,
 	}, {
 		.name       = "linux kernel(nor)",
-		.size       = 0x400000,
+		.size       = 0x100000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "file system(nor)",
@@ -642,7 +655,7 @@ static struct resource bfin_spi1_resource[] = {
 
 /* SPI controller data */
 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -658,7 +671,7 @@ static struct platform_device bf54x_spi_master0 = {
 };
 
 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index dc0dd9b2bcef..c66f3801274f 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -99,8 +99,8 @@ static struct platform_device bfin_isp1760_device = {
 #include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
-	.width =	480,
-	.height =	272,
+	.width =	95,
+	.height =	54,
 	.xres =		{480, 480, 480},
 	.yres =		{272, 272, 272},
 	.bpp =		{24, 24, 24},
@@ -702,7 +702,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 1,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
@@ -783,7 +783,7 @@ static struct resource bfin_spi1_resource[] = {
 
 /* SPI controller data */
 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -799,7 +799,7 @@ static struct platform_device bf54x_spi_master0 = {
 };
 
 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
@@ -869,7 +869,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = 212,
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index 535980652bf6..d9239bc05dd4 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -91,16 +91,16 @@ int channel2irq(unsigned int channel)
 		ret_irq = IRQ_SPI1;
 		break;
 	case CH_UART0_RX:
-		ret_irq = IRQ_UART_RX;
+		ret_irq = IRQ_UART0_RX;
 		break;
 	case CH_UART0_TX:
-		ret_irq = IRQ_UART_TX;
+		ret_irq = IRQ_UART0_TX;
 		break;
 	case CH_UART1_RX:
-		ret_irq = IRQ_UART_RX;
+		ret_irq = IRQ_UART1_RX;
 		break;
 	case CH_UART1_TX:
-		ret_irq = IRQ_UART_TX;
+		ret_irq = IRQ_UART1_TX;
 		break;
 	case CH_EPPI0:
 		ret_irq = IRQ_EPPI0;
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index cd040fe0bc5c..52b116ae522a 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file should be up to date with:
- *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -162,6 +162,8 @@
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
 /* Incorrect Use of Stack in Lockbox Firmware During Authentication */
 #define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
 /* OTP Write Accesses Not Supported */
 #define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
@@ -176,12 +178,26 @@
 #define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
 /* USB DMA Mode 1 Short Packet Data Corruption */
 #define ANOMALY_05000450 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
 /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
-#define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* USB DMA RX Data Corruption */
+#define ANOMALY_05000463 (1)
+/* USB TX DMA Hang */
+#define ANOMALY_05000464 (1)
 /* USB Rx DMA hang */
 #define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (1)
 /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
 #define ANOMALY_05000467 (1)
 
@@ -230,6 +246,7 @@
 #define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 6b97396d817f..318667b2f036 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -72,97 +72,8 @@
 #include "cdefBF549.h"
 #endif
 
-/* UART 1*/
-#define bfin_read_UART_THR()		bfin_read_UART1_THR()
-#define bfin_write_UART_THR(val)	bfin_write_UART1_THR(val)
-#define bfin_read_UART_RBR()		bfin_read_UART1_RBR()
-#define bfin_write_UART_RBR(val)	bfin_write_UART1_RBR(val)
-#define bfin_read_UART_DLL()		bfin_read_UART1_DLL()
-#define bfin_write_UART_DLL(val)	bfin_write_UART1_DLL(val)
-#define bfin_read_UART_IER()		bfin_read_UART1_IER()
-#define bfin_write_UART_IER(val)	bfin_write_UART1_IER(val)
-#define bfin_read_UART_DLH()		bfin_read_UART1_DLH()
-#define bfin_write_UART_DLH(val)	bfin_write_UART1_DLH(val)
-#define bfin_read_UART_IIR()		bfin_read_UART1_IIR()
-#define bfin_write_UART_IIR(val)	bfin_write_UART1_IIR(val)
-#define bfin_read_UART_LCR()		bfin_read_UART1_LCR()
-#define bfin_write_UART_LCR(val)	bfin_write_UART1_LCR(val)
-#define bfin_read_UART_MCR()		bfin_read_UART1_MCR()
-#define bfin_write_UART_MCR(val)	bfin_write_UART1_MCR(val)
-#define bfin_read_UART_LSR()		bfin_read_UART1_LSR()
-#define bfin_write_UART_LSR(val)	bfin_write_UART1_LSR(val)
-#define bfin_read_UART_SCR()		bfin_read_UART1_SCR()
-#define bfin_write_UART_SCR(val)	bfin_write_UART1_SCR(val)
-#define bfin_read_UART_GCTL()		bfin_read_UART1_GCTL()
-#define bfin_write_UART_GCTL(val)	bfin_write_UART1_GCTL(val)
-
 #endif
 
-/* MAP used DEFINES from BF533 to BF54x - so we don't need to change 
- * them in the driver, kernel, etc. */
-
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
-/* UART 0*/
-
-/* DMA Channel */
-#define bfin_read_CH_UART_RX()		bfin_read_CH_UART1_RX()
-#define bfin_write_CH_UART_RX(val)	bfin_write_CH_UART1_RX(val)
-#define bfin_read_CH_UART_TX()		bfin_read_CH_UART1_TX()
-#define bfin_write_CH_UART_TX(val)	bfin_write_CH_UART1_TX(val)
-#define CH_UART_RX			CH_UART1_RX
-#define CH_UART_TX			CH_UART1_TX
-
-/* System Interrupt Controller */
-#define bfin_read_IRQ_UART_RX()		bfin_read_IRQ_UART1_RX()
-#define bfin_write_IRQ_UART_RX(val)	bfin_write_IRQ_UART1_RX(val)
-#define bfin_read_IRQ_UART_TX()		bfin_read_IRQ_UART1_TX()
-#define bfin_write_IRQ_UART_TX(val)	bfin_write_IRQ_UART1_TX(val)
-#define bfin_read_IRQ_UART_ERROR()	bfin_read_IRQ_UART1_ERROR()
-#define bfin_write_IRQ_UART_ERROR(val)	bfin_write_IRQ_UART1_ERROR(val)
-#define IRQ_UART_RX			IRQ_UART1_RX
-#define	IRQ_UART_TX			IRQ_UART1_TX
-#define	IRQ_UART_ERROR			IRQ_UART1_ERROR
-
-/* MMR Registers*/
-#define bfin_read_UART_THR()		bfin_read_UART1_THR()
-#define bfin_write_UART_THR(val)	bfin_write_UART1_THR(val)
-#define bfin_read_UART_RBR()		bfin_read_UART1_RBR()
-#define bfin_write_UART_RBR(val)	bfin_write_UART1_RBR(val)
-#define bfin_read_UART_DLL()		bfin_read_UART1_DLL()
-#define bfin_write_UART_DLL(val)	bfin_write_UART1_DLL(val)
-#define bfin_read_UART_IER()		bfin_read_UART1_IER()
-#define bfin_write_UART_IER(val)	bfin_write_UART1_IER(val)
-#define bfin_read_UART_DLH()		bfin_read_UART1_DLH()
-#define bfin_write_UART_DLH(val)	bfin_write_UART1_DLH(val)
-#define bfin_read_UART_IIR()		bfin_read_UART1_IIR()
-#define bfin_write_UART_IIR(val)	bfin_write_UART1_IIR(val)
-#define bfin_read_UART_LCR()		bfin_read_UART1_LCR()
-#define bfin_write_UART_LCR(val)	bfin_write_UART1_LCR(val)
-#define bfin_read_UART_MCR()		bfin_read_UART1_MCR()
-#define bfin_write_UART_MCR(val)	bfin_write_UART1_MCR(val)
-#define bfin_read_UART_LSR()		bfin_read_UART1_LSR()
-#define bfin_write_UART_LSR(val)	bfin_write_UART1_LSR(val)
-#define bfin_read_UART_SCR()		bfin_read_UART1_SCR()
-#define bfin_write_UART_SCR(val)	bfin_write_UART1_SCR(val)
-#define bfin_read_UART_GCTL()		bfin_read_UART1_GCTL()
-#define bfin_write_UART_GCTL(val)	bfin_write_UART1_GCTL(val)
-
-#define BFIN_UART_THR			UART1_THR
-#define BFIN_UART_RBR			UART1_RBR
-#define BFIN_UART_DLL			UART1_DLL
-#define BFIN_UART_IER			UART1_IER
-#define BFIN_UART_DLH			UART1_DLH
-#define BFIN_UART_IIR			UART1_IIR
-#define BFIN_UART_LCR			UART1_LCR
-#define BFIN_UART_MCR			UART1_MCR
-#define BFIN_UART_LSR			UART1_LSR
-#define BFIN_UART_SCR			UART1_SCR
-#define BFIN_UART_GCTL			UART1_GCTL
-
 #define BFIN_UART_NR_PORTS	4
 
 #define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 0c9d72c5f5ba..6577ecfcf11e 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -42,6 +42,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <linux/mtd/physmap.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -98,13 +99,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -139,28 +133,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 5,
+		.chip_select = 1,
 		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -213,6 +198,13 @@ static struct platform_device hitachi_fb_device = {
 
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
 
 static struct resource smc91x_resources[] = {
 	{
@@ -231,6 +223,65 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x24008000,
+		.end = 0x24008000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PF43,
+		.end = IRQ_PF43,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x24000000,
+		.end = 0x24000000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF45,
+		.end = IRQ_PF45,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
 };
 #endif
 
@@ -369,6 +420,46 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x100000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x207fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -422,6 +513,14 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 	&smc91x_device,
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+	&smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
@@ -430,6 +529,10 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 	&bfin_pata_device,
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&para_flash_device,
+#endif
+
 	&bfin_gpios_device,
 };
 
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 4df904f9e90a..caed96bb957e 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -147,6 +147,14 @@ static struct platform_device net2272_bfin_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -166,6 +174,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
@@ -334,7 +345,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index a5312b2d267e..70da495c9665 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -262,6 +262,8 @@
 #define ANOMALY_05000366 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 4)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 /* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index 35280f06b7b6..f72a6af20c4f 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -85,16 +85,10 @@ ENTRY(_coreb_trampoline_start)
 	R0 = ~ENICPLB;
 	R0 = R0 & R1;
 
-	/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
+	/* Disabling of CPLBs should be proceeded by a CSYNC */
+	CSYNC;
 	[p0] = R0;
 	SSYNC;
-#ifdef ANOMALY_05000125
-	STI R2;
-#endif
 
 	/* Turn off the dcache */
 	p0.l = LO(DMEM_CONTROL);
@@ -103,16 +97,10 @@ ENTRY(_coreb_trampoline_start)
 	R0 = ~ENDCPLB;
 	R0 = R0 & R1;
 
-	/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
+	/* Disabling of CPLBs should be proceeded by a CSYNC */
+	CSYNC;
 	[p0] = R0;
 	SSYNC;
-#ifdef ANOMALY_05000125
-	STI R2;
-#endif
 
 	/* in case of double faults, save a few things */
 	p0.l = _init_retx_coreb;
@@ -126,22 +114,22 @@ ENTRY(_coreb_trampoline_start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r7 = [p0 + PDA_RETX];
+	r7 = [p0 + PDA_DF_RETX];
 	p1.l = _init_saved_retx_coreb;
 	p1.h = _init_saved_retx_coreb;
 	[p1] = r7;
 
-	r7 = [p0 + PDA_DCPLB];
+	r7 = [p0 + PDA_DF_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr_coreb;
 	p1.h = _init_saved_dcplb_fault_addr_coreb;
 	[p1] = r7;
 
-	r7 = [p0 + PDA_ICPLB];
+	r7 = [p0 + PDA_DF_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr_coreb;
 	p1.h = _init_saved_icplb_fault_addr_coreb;
 	[p1] = r7;
 
-	r7 = [p0 + PDA_SEQSTAT];
+	r7 = [p0 + PDA_DF_SEQSTAT];
 	p1.l = _init_saved_seqstat_coreb;
 	p1.h = _init_saved_seqstat_coreb;
 	[p1] = r7;
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index dd8b2dc97f56..814cb483853b 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -6,7 +6,6 @@ obj-y := \
 	cache.o cache-c.o entry.o head.o \
 	interrupt.o arch_checks.o ints-priority.o
 
-obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
 obj-$(CONFIG_PM)          += pm.o dpmc_modes.o
 obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c
index b59ce3cb3807..4ebbd78db3a4 100644
--- a/arch/blackfin/mach-common/cache-c.c
+++ b/arch/blackfin/mach-common/cache-c.c
@@ -1,14 +1,16 @@
 /*
  * Blackfin cache control code (simpler control-style functions)
  *
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
  * Licensed under the GPL-2 or later.
  */
 
+#include <linux/init.h>
 #include <asm/blackfin.h>
+#include <asm/cplbinit.h>
 
 /* Invalidate the Entire Data cache by
  * clearing DMC[1:0] bits
@@ -34,3 +36,43 @@ void blackfin_invalidate_entire_icache(void)
 	SSYNC();
 }
 
+#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE)
+
+static void
+bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr,
+                unsigned long cplb_data, unsigned long mem_control,
+                unsigned long mem_mask)
+{
+	int i;
+
+	for (i = 0; i < MAX_CPLBS; i++) {
+		bfin_write32(cplb_addr + i * 4, cplb_tbl[i].addr);
+		bfin_write32(cplb_data + i * 4, cplb_tbl[i].data);
+	}
+
+	_enable_cplb(mem_control, mem_mask);
+}
+
+#ifdef CONFIG_BFIN_ICACHE
+void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
+{
+	bfin_cache_init(icplb_tbl, ICPLB_ADDR0, ICPLB_DATA0, IMEM_CONTROL,
+		(IMC | ENICPLB));
+}
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
+{
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	bfin_cache_init(dcplb_tbl, DCPLB_ADDR0, DCPLB_DATA0, DMEM_CONTROL,
+		(DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0)));
+}
+#endif
+
+#endif
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index fb1795d5be2a..01af24cde362 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -301,27 +301,31 @@ ENTRY(_ex_replaceable)
 	nop;
 
 ENTRY(_ex_trap_c)
+	/* The only thing that has been saved in this context is
+	 * (R7:6,P5:4), ASTAT & SP - don't use anything else
+	 */
+
+	GET_PDA(p5, r6);
+
 	/* Make sure we are not in a double fault */
 	p4.l = lo(IPEND);
 	p4.h = hi(IPEND);
 	r7 = [p4];
 	CC = BITTST (r7, 5);
 	if CC jump _double_fault;
+	[p5 + PDA_EXIPEND] = r7;
 
 	/* Call C code (trap_c) to handle the exception, which most
 	 * likely involves sending a signal to the current process.
 	 * To avoid double faults, lower our priority to IRQ5 first.
 	 */
-	P5.h = _exception_to_level5;
-	P5.l = _exception_to_level5;
+	r7.h = _exception_to_level5;
+	r7.l = _exception_to_level5;
 	p4.l = lo(EVT5);
 	p4.h = hi(EVT5);
-	[p4] = p5;
+	[p4] = r7;
 	csync;
 
-	GET_PDA(p5, r6);
-#ifndef CONFIG_DEBUG_DOUBLEFAULT
-
 	/*
 	 * Save these registers, as they are only valid in exception context
 	 *  (where we are now - as soon as we defer to IRQ5, they can change)
@@ -341,7 +345,10 @@ ENTRY(_ex_trap_c)
 
 	r6 = retx;
 	[p5 + PDA_RETX] = r6;
-#endif
+
+	r6 = SEQSTAT;
+	[p5 + PDA_SEQSTAT] = r6;
+
 	/* Save the state of single stepping */
 	r6 = SYSCFG;
 	[p5 + PDA_SYSCFG] = r6;
@@ -349,8 +356,7 @@ ENTRY(_ex_trap_c)
 	BITCLR(r6, SYSCFG_SSSTEP_P);
 	SYSCFG = r6;
 
-	/* Disable all interrupts, but make sure level 5 is enabled so
-	 * we can switch to that level.  Save the old mask.  */
+	/* Save the current IMASK, since we change in order to jump to level 5 */
 	cli r6;
 	[p5 + PDA_EXIMASK] = r6;
 
@@ -358,9 +364,21 @@ ENTRY(_ex_trap_c)
 	p4.h = hi(SAFE_USER_INSTRUCTION);
 	retx = p4;
 
+	/* Disable all interrupts, but make sure level 5 is enabled so
+	 * we can switch to that level.
+	 */
 	r6 = 0x3f;
 	sti r6;
 
+	/* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
+	 * clear it (re-enabling interrupts again) by the special sequence of pushing
+	 * RETI onto the stack.  This way we can lower ourselves to IVG5 even if the
+	 * exception was taken after the interrupt handler was called but before it
+	 * got a chance to enable global interrupts itself.
+	 */
+	[--sp] = reti;
+	sp += 4;
+
 	raise 5;
 	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_trap_c)
@@ -379,8 +397,7 @@ ENTRY(_double_fault)
 
 	R5 = [P4];              /* Control Register*/
 	BITCLR(R5,ENICPLB_P);
-	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
 
@@ -388,8 +405,7 @@ ENTRY(_double_fault)
 	P4.H = HI(DMEM_CONTROL);
 	R5 = [P4];
 	BITCLR(R5,ENDCPLB_P);
-	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
 
@@ -420,47 +436,55 @@ ENDPROC(_double_fault)
 ENTRY(_exception_to_level5)
 	SAVE_ALL_SYS
 
-	GET_PDA(p4, r7);        /* Fetch current PDA */
-	r6 = [p4 + PDA_RETX];
+	GET_PDA(p5, r7);        /* Fetch current PDA */
+	r6 = [p5 + PDA_RETX];
 	[sp + PT_PC] = r6;
 
-	r6 = [p4 + PDA_SYSCFG];
+	r6 = [p5 + PDA_SYSCFG];
 	[sp + PT_SYSCFG] = r6;
 
-	/* Restore interrupt mask.  We haven't pushed RETI, so this
-	 * doesn't enable interrupts until we return from this handler.  */
-	r6 = [p4 + PDA_EXIMASK];
-	sti r6;
+	r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */
+	[sp + PT_SEQSTAT] = r6;
 
 	/* Restore the hardware error vector.  */
-	P5.h = _evt_ivhw;
-	P5.l = _evt_ivhw;
+	r7.h = _evt_ivhw;
+	r7.l = _evt_ivhw;
 	p4.l = lo(EVT5);
 	p4.h = hi(EVT5);
-	[p4] = p5;
+	[p4] = r7;
 	csync;
 
-	p2.l = lo(IPEND);
-	p2.h = hi(IPEND);
-	csync;
-	r0 = [p2];              /* Read current IPEND */
-	[sp + PT_IPEND] = r0;   /* Store IPEND */
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Now that we have the hardware error vector programmed properly
+	 * we can re-enable interrupts (IPEND[4]), so if the _trap_c causes
+	 * another hardware error, we can catch it (self-nesting).
+	 */
+	[--sp] = reti;
+	sp += 4;
+#endif
+
+	r7 = [p5 + PDA_EXIPEND]	/* Read the IPEND from the Exception state */
+	[sp + PT_IPEND] = r7;   /* Store IPEND onto the stack */
 
 	r0 = sp; 	/* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
 	call _trap_c;
 	SP += 12;
 
-#ifdef CONFIG_DEBUG_DOUBLEFAULT
-	/* Grab ILAT */
-	p2.l = lo(ILAT);
-	p2.h = hi(ILAT);
-	r0 = [p2];
-	r1 = 0x20;  /* Did I just cause anther HW error? */
-	r0 = r0 & r1;
-	CC = R0 == R1;
-	if CC JUMP _double_fault;
-#endif
+	/* If interrupts were off during the exception (IPEND[4] = 1), turn them off
+	 * before we return.
+	 */
+	CC = BITTST(r7, EVT_IRPTEN_P)
+	if !CC jump 1f;
+	/* this will load a random value into the reti register - but that is OK,
+	 * since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro
+	 */
+	sp += -4;
+	reti = [sp++];
+1:
+	/* restore the interrupt mask (IMASK) */
+	r6 = [p5 + PDA_EXIMASK];
+	sti r6;
 
 	call _ret_from_exception;
 	RESTORE_ALL_SYS
@@ -474,7 +498,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	 */
 	EX_SCRATCH_REG = sp;
 	GET_PDA_SAFE(sp);
-	sp = [sp + PDA_EXSTACK]
+	sp = [sp + PDA_EXSTACK];
 	/* Try to deal with syscalls quickly.  */
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
@@ -489,14 +513,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	ssync;
 #endif
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r7 == r7;
-	p5.h = HI(CHIPID);
-	p5.l = LO(CHIPID);
-	if cc jump 1f;
-	r7.l = W[p5];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p5, r7)
 
 #ifdef CONFIG_DEBUG_DOUBLEFAULT
 	/*
@@ -510,18 +527,18 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	p4.l = lo(DCPLB_FAULT_ADDR);
 	p4.h = hi(DCPLB_FAULT_ADDR);
 	r7 = [p4];
-	[p5 + PDA_DCPLB] = r7;
+	[p5 + PDA_DF_DCPLB] = r7;
 
 	p4.l = lo(ICPLB_FAULT_ADDR);
 	p4.h = hi(ICPLB_FAULT_ADDR);
 	r7 = [p4];
-	[p5 + PDA_ICPLB] = r7;
+	[p5 + PDA_DF_ICPLB] = r7;
 
-	r6 = retx;
-	[p5 + PDA_RETX] = r6;
+	r7 = retx;
+	[p5 + PDA_DF_RETX] = r7;
 
 	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
-	[p5 + PDA_SEQSTAT] = r7;
+	[p5 + PDA_DF_SEQSTAT] = r7;
 #else
 	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
 #endif
@@ -686,8 +703,14 @@ ENTRY(_system_call)
 #ifdef CONFIG_IPIPE
 	cc = BITTST(r7, TIF_IRQ_SYNC);
 	if !cc jump .Lsyscall_no_irqsync;
+	/*
+	 * Clear IPEND[4] manually to undo what resume_userspace_1 just did;
+	 * we need this so that high priority domain interrupts may still
+	 * preempt the current domain while the pipeline log is being played
+	 * back.
+	 */
 	[--sp] = reti;
-	r0 = [sp++];
+	SP += 4; /* don't merge with next insn to keep the pattern obvious */
 	SP += -12;
 	call ___ipipe_sync_root;
 	SP += 12;
@@ -699,7 +722,7 @@ ENTRY(_system_call)
 
 	/* Reenable interrupts.  */
 	[--sp] = reti;
-	r0 = [sp++];
+	sp += 4;
 
 	SP += -12;
 	call _schedule;
@@ -715,7 +738,7 @@ ENTRY(_system_call)
 .Lsyscall_do_signals:
 	/* Reenable interrupts.  */
 	[--sp] = reti;
-	r0 = [sp++];
+	sp += 4;
 
 	r0 = sp;
 	SP += -12;
@@ -725,10 +748,6 @@ ENTRY(_system_call)
 .Lsyscall_really_exit:
 	r5 = [sp + PT_RESERVED];
 	rets = r5;
-#ifdef CONFIG_IPIPE
-	[--sp] = reti;
-	r5 = [sp++];
-#endif /* CONFIG_IPIPE */
 	rts;
 ENDPROC(_system_call)
 
@@ -816,13 +835,13 @@ ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
 #ifdef CONFIG_IPIPE
-	[--sp] = rets;
-	SP += -12;
-	call ___ipipe_check_root
-	SP += 12
-	rets = [sp++];
-	cc = r0 == 0;
-	if cc jump 4f;                /* not on behalf of Linux, get out */
+	p2.l = _per_cpu__ipipe_percpu_domain;
+	p2.h = _per_cpu__ipipe_percpu_domain;
+	r0.l = _ipipe_root;
+	r0.h = _ipipe_root;
+	r2 = [p2];
+	cc = r0 == r2;
+	if !cc jump 4f;  /* not on behalf of the root domain, get out */
 #endif /* CONFIG_IPIPE */
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
@@ -882,14 +901,9 @@ ENDPROC(_ret_from_exception)
 
 #ifdef CONFIG_IPIPE
 
-_sync_root_irqs:
-	[--sp] = reti;		/* Reenable interrupts */
-	r0 = [sp++];
-	jump.l ___ipipe_sync_root
-
 _resume_kernel_from_int:
-	r0.l = _sync_root_irqs
-	r0.h = _sync_root_irqs
+	r0.l = ___ipipe_sync_root;
+	r0.h = ___ipipe_sync_root;
 	[--sp] = rets;
 	[--sp] = ( r7:4, p5:3 );
 	SP += -12;
@@ -953,10 +967,10 @@ ENTRY(_lower_to_irq14)
 #endif
 
 #ifdef CONFIG_DEBUG_HWERR
-	/* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
 	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 #else
-	/* Only enable irq14 interrupt, until we transition to _evt14_softirq */
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
 	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 #endif
 	sti r0;
@@ -964,7 +978,7 @@ ENTRY(_lower_to_irq14)
 	rti;
 ENDPROC(_lower_to_irq14)
 
-ENTRY(_evt14_softirq)
+ENTRY(_evt_evt14)
 #ifdef CONFIG_DEBUG_HWERR
 	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 	sti r0;
@@ -974,7 +988,7 @@ ENTRY(_evt14_softirq)
 	[--sp] = RETI;
 	SP += 4;
 	rts;
-ENDPROC(_evt14_softirq)
+ENDPROC(_evt_evt14)
 
 ENTRY(_schedule_and_signal_from_int)
 	/* To end up here, vector 15 was changed - so we have to change it
@@ -1004,6 +1018,12 @@ ENTRY(_schedule_and_signal_from_int)
 #endif
 	sti r0;
 
+	/* finish the userspace "atomic" functions for it */
+	r1 = FIXED_CODE_END;
+	r2 = [sp + PT_PC];
+	cc = r1 <= r2;
+	if cc jump .Lresume_userspace (bp);
+
 	r0 = sp;
 	sp += -12;
 	call _finish_atomic_sections;
@@ -1107,14 +1127,7 @@ ENTRY(_early_trap)
 	SAVE_ALL_SYS
 	trace_buffer_stop(p0,r0);
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r5 == r5;
-	p4.h = HI(CHIPID);
-	p4.l = LO(CHIPID);
-	if cc jump 1f;
-	r5.l = W[p4];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p4, r5)
 
 	/* Turn caches off, to ensure we don't get double exceptions */
 
@@ -1123,9 +1136,7 @@ ENTRY(_early_trap)
 
 	R5 = [P4];              /* Control Register*/
 	BITCLR(R5,ENICPLB_P);
-	CLI R1;
-	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
 
@@ -1133,11 +1144,9 @@ ENTRY(_early_trap)
 	P4.H = HI(DMEM_CONTROL);
 	R5 = [P4];
 	BITCLR(R5,ENDCPLB_P);
-	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
-	STI R1;
 
 	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
 	r1 = RETX;
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index f826f6b9f917..9c79dfea2a53 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -124,22 +124,22 @@ ENTRY(__start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r6 = [p0 + PDA_RETX];
+	r6 = [p0 + PDA_DF_RETX];
 	p1.l = _init_saved_retx;
 	p1.h = _init_saved_retx;
 	[p1] = r6;
 
-	r6 = [p0 + PDA_DCPLB];
+	r6 = [p0 + PDA_DF_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr;
 	p1.h = _init_saved_dcplb_fault_addr;
 	[p1] = r6;
 
-	r6 = [p0 + PDA_ICPLB];
+	r6 = [p0 + PDA_DF_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr;
 	p1.h = _init_saved_icplb_fault_addr;
 	[p1] = r6;
 
-	r6 = [p0 + PDA_SEQSTAT];
+	r6 = [p0 + PDA_DF_SEQSTAT];
 	p1.l = _init_saved_seqstat;
 	p1.h = _init_saved_seqstat;
 	[p1] = r6;
@@ -153,6 +153,8 @@ ENTRY(__start)
 
 #ifdef CONFIG_EARLY_PRINTK
 	call _init_early_exception_vectors;
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+	sti r0;
 #endif
 
 	r0 = 0 (x);
@@ -212,12 +214,21 @@ ENTRY(__start)
 	[p0] = p1;
 	csync;
 
+#ifdef CONFIG_EARLY_PRINTK
+	r0 = (EVT_IVG15 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU) (z);
+#else
 	r0 = EVT_IVG15 (z);
+#endif
 	sti r0;
 
 	raise 15;
+#ifdef CONFIG_EARLY_PRINTK
+	p0.l = _early_trap;
+	p0.h = _early_trap;
+#else
 	p0.l = .LWAIT_HERE;
 	p0.h = .LWAIT_HERE;
+#endif
 	reti = p0;
 #if ANOMALY_05000281
 	nop; nop; nop;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 9c46680186e4..82d417ef4b5b 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -119,14 +119,8 @@ __common_int_entry:
 	fp = 0;
 #endif
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r7 == r7;
-	p5.h = HI(CHIPID);
-	p5.l = LO(CHIPID);
-	if cc jump 1f;
-	r7.l = W[p5];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p5, r7)
+
 	r1 =  sp;
 	SP += -12;
 #ifdef CONFIG_IPIPE
@@ -158,14 +152,7 @@ ENTRY(_evt_ivhw)
 	fp = 0;
 #endif
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r7 == r7;
-	p5.h = HI(CHIPID);
-	p5.l = LO(CHIPID);
-	if cc jump 1f;
-	r7.l = W[p5];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p5, r7)
 
 	/* Handle all stacked hardware errors
 	 * To make sure we don't hang forever, only do it 10 times
@@ -261,6 +248,31 @@ ENTRY(_evt_system_call)
 ENDPROC(_evt_system_call)
 
 #ifdef CONFIG_IPIPE
+/*
+ * __ipipe_call_irqtail: lowers the current priority level to EVT15
+ * before running a user-defined routine, then raises the priority
+ * level to EVT14 to prepare the caller for a normal interrupt
+ * return through RTI.
+ *
+ * We currently use this facility in two occasions:
+ *
+ * - to branch to __ipipe_irq_tail_hook as requested by a high
+ *   priority domain after the pipeline delivered an interrupt,
+ *   e.g. such as Xenomai, in order to start its rescheduling
+ *   procedure, since we may not switch tasks when IRQ levels are
+ *   nested on the Blackfin, so we have to fake an interrupt return
+ *   so that we may reschedule immediately.
+ *
+ * - to branch to sync_root_irqs, in order to play any interrupt
+ *   pending for the root domain (i.e. the Linux kernel). This lowers
+ *   the core priority level enough so that Linux IRQ handlers may
+ *   never delay interrupts handled by high priority domains; we defer
+ *   those handlers until this point instead. This is a substitute
+ *   to using a threaded interrupt model for the Linux kernel.
+ *
+ * r0: address of user-defined routine
+ * context: caller must have preempted EVT15, hw interrupts must be off.
+ */
 ENTRY(___ipipe_call_irqtail)
 	p0 = r0;
 	r0.l = 1f;
@@ -276,33 +288,19 @@ ENTRY(___ipipe_call_irqtail)
 	( r7:4, p5:3 ) = [sp++];
 	rets = [sp++];
 
-	[--sp] = reti;
-	reti = [sp++];          /* IRQs are off. */
-	r0.h = 3f;
-	r0.l = 3f;
-	p0.l = lo(EVT14);
-	p0.h = hi(EVT14);
-	[p0] = r0;
-	csync;
-	r0 = 0x401f (z);
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IVHW | \
+		EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | \
+		EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
 	sti r0;
-	raise 14;
-	[--sp] = reti;          /* IRQs on. */
+	raise 14;		/* Branches to _evt_evt14 */
 2:
 	jump 2b;                /* Likely paranoid. */
-3:
-	sp += 4;                /* Discard saved RETI */
-	r0.h = _evt14_softirq;
-	r0.l = _evt14_softirq;
-	p0.l = lo(EVT14);
-	p0.h = hi(EVT14);
-	[p0] = r0;
-	csync;
-	p0.l = _bfin_irq_flags;
-	p0.h = _bfin_irq_flags;
-	r0 = [p0];
-	sti r0;
-	rts;
 ENDPROC(___ipipe_call_irqtail)
 
 #endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index b42150190d0e..6ffda78aaf9d 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -967,7 +967,7 @@ void __cpuinit init_exception_vectors(void)
 	bfin_write_EVT11(evt_evt11);
 	bfin_write_EVT12(evt_evt12);
 	bfin_write_EVT13(evt_evt13);
-	bfin_write_EVT14(evt14_softirq);
+	bfin_write_EVT14(evt_evt14);
 	bfin_write_EVT15(evt_system_call);
 	CSYNC();
 }
@@ -1052,18 +1052,26 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
+
 #ifdef CONFIG_SMP
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+		case IRQ_TIMER0:
+#endif
+#ifdef CONFIG_TICKSOURCE_CORETMR
+		case IRQ_CORETMR:
+#endif
 		case IRQ_SUPPLE_0:
 		case IRQ_SUPPLE_1:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
 #endif
+
 #ifdef CONFIG_IPIPE
 #ifndef CONFIG_TICKSOURCE_CORETMR
 		case IRQ_TIMER0:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
-#endif /* !CONFIG_TICKSOURCE_CORETMR */
+#endif
 		case IRQ_CORETMR:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
@@ -1071,15 +1079,10 @@ int __init init_arch_irq(void)
 			set_irq_handler(irq, handle_level_irq);
 			break;
 #else /* !CONFIG_IPIPE */
-#ifdef CONFIG_TICKSOURCE_GPTMR0
-		case IRQ_TIMER0:
-			set_irq_handler(irq, handle_percpu_irq);
-			break;
-#endif /* CONFIG_TICKSOURCE_GPTMR0 */
 		default:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
-#endif	/* !CONFIG_IPIPE */
+#endif /* !CONFIG_IPIPE */
 		}
 	}
 
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
deleted file mode 100644
index 6c5f5f0ea7fe..000000000000
--- a/arch/blackfin/mach-common/lock.S
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * File:         arch/blackfin/mach-common/lock.S
- * Based on:
- * Author:       LG Soft India
- *
- * Created:      ?
- * Description:  kernel locks
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-/* When you come here, it is assumed that
- * R0 - Which way to be locked
- */
-
-ENTRY(_cache_grab_lock)
-
-	[--SP]=( R7:0,P5:0 );
-
-	P1.H = HI(IMEM_CONTROL);
-	P1.L = LO(IMEM_CONTROL);
-	P5.H = HI(ICPLB_ADDR0);
-	P5.L = LO(ICPLB_ADDR0);
-	P4.H = HI(ICPLB_DATA0);
-	P4.L = LO(ICPLB_DATA0);
-	R7 = R0;
-
-	/* If the code of interest already resides in the cache
-	 * invalidate the entire cache itself.
-	 * invalidate_entire_icache;
-	 */
-
-	SP += -12;
-	[--SP] = RETS;
-	CALL _invalidate_entire_icache;
-	RETS = [SP++];
-	SP += 12;
-
-	/* Disable the Interrupts*/
-
-	CLI R3;
-
-.LLOCK_WAY:
-
-	/* Way0 - 0xFFA133E0
-	 * Way1 - 0xFFA137E0
-	 * Way2 - 0xFFA13BE0	Total Way Size = 4K
-	 * Way3 - 0xFFA13FE0
-	 */
-
-	/* Procedure Ex. -Set the locks for other ways by setting ILOC[3:1]
-	 * Only Way0 of the instruction cache can now be
-	 * replaced by a new code
-	 */
-
-	R5 = R7;
-	CC = BITTST(R7,0);
-	IF CC JUMP .LCLEAR1;
-	R7 = 0;
-	BITSET(R7,0);
-	JUMP .LDONE1;
-
-.LCLEAR1:
-	R7 = 0;
-	BITCLR(R7,0);
-.LDONE1:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-	R7 = R5;
-	CC = BITTST(R7,1);
-	IF CC JUMP .LCLEAR2;
-	R7 = 0;
-	BITSET(R7,1);
-	JUMP .LDONE2;
-
-.LCLEAR2:
-	R7 = 0;
-	BITCLR(R7,1);
-.LDONE2:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-	R7 = R5;
-	CC = BITTST(R7,2);
-	IF CC JUMP .LCLEAR3;
-	R7 = 0;
-	BITSET(R7,2);
-	JUMP .LDONE3;
-.LCLEAR3:
-	R7 = 0;
-	BITCLR(R7,2);
-.LDONE3:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-
-	R7 = R5;
-	CC = BITTST(R7,3);
-	IF CC JUMP .LCLEAR4;
-	R7 = 0;
-	BITSET(R7,3);
-	JUMP .LDONE4;
-.LCLEAR4:
-	R7 = 0;
-	BITCLR(R7,3);
-.LDONE4:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-	STI R3;
-
-	( R7:0,P5:0 ) = [SP++];
-
-	RTS;
-ENDPROC(_cache_grab_lock)
-
-/* After the execution of critical code, the code is now locked into
- * the cache way. Now we need to set ILOC.
- *
- * R0 - Which way to be locked
- */
-
-ENTRY(_bfin_cache_lock)
-
-	[--SP]=( R7:0,P5:0 );
-
-	P1.H = HI(IMEM_CONTROL);
-	P1.L = LO(IMEM_CONTROL);
-
-	/* Disable the Interrupts*/
-	CLI R3;
-
-	R7 = [P1];
-	R2 = ~(0x78) (X);	/* mask out ILOC */
-	R7 = R7 & R2;
-	R0 = R0 << 3;
-	R7 = R0 | R7;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-	/* Renable the Interrupts */
-	STI R3;
-
-	( R7:0,P5:0 ) = [SP++];
-	RTS;
-ENDPROC(_bfin_cache_lock)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_invalidate_entire_icache)
-	[--SP] = ( R7:5);
-
-	P0.L = LO(IMEM_CONTROL);
-	P0.H = HI(IMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the IMC bit , All valid bits in the instruction
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,IMC_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before invalidating cache. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the instruction cache agian */
-	R6 = (IMC | ENICPLB);
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:5) = [SP++];
-	RTS;
-ENDPROC(_invalidate_entire_icache)
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 9e7e27b7fc8d..0e3d4ff9d8b6 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -38,6 +38,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
+#include <asm/cplb.h>
 #include <asm/gpio.h>
 #include <asm/dma.h>
 #include <asm/dpmc.h>
@@ -170,58 +171,6 @@ static void flushinv_all_dcache(void)
 }
 #endif
 
-static inline void dcache_disable(void)
-{
-#ifdef CONFIG_BFIN_DCACHE
-	unsigned long ctrl;
-
-#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
-	flushinv_all_dcache();
-#endif
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl &= ~ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
-static inline void dcache_enable(void)
-{
-#ifdef CONFIG_BFIN_DCACHE
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
-static inline void icache_disable(void)
-{
-#ifdef CONFIG_BFIN_ICACHE
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl &= ~ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
-static inline void icache_enable(void)
-{
-#ifdef CONFIG_BFIN_ICACHE
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
 int bfin_pm_suspend_mem_enter(void)
 {
 	unsigned long flags;
@@ -258,16 +207,19 @@ int bfin_pm_suspend_mem_enter(void)
 
 	bfin_gpio_pm_hibernate_suspend();
 
-	dcache_disable();
-	icache_disable();
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+	flushinv_all_dcache();
+#endif
+	_disable_dcplb();
+	_disable_icplb();
 	bf53x_suspend_l1_mem(memptr);
 
 	do_hibernate(wakeup | vr_wakeup);	/* Goodbye */
 
 	bf53x_resume_l1_mem(memptr);
 
-	icache_enable();
-	dcache_enable();
+	_enable_icplb();
+	_enable_dcplb();
 
 	bfin_gpio_pm_hibernate_restore();
 	blackfin_dma_resume();
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 68bd0bd680cd..b88ce7fda548 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -33,6 +33,7 @@
 #include <asm/bfin-global.h>
 #include <asm/pda.h>
 #include <asm/cplbinit.h>
+#include <asm/early_printk.h>
 #include "blackfin_sram.h"
 
 /*
@@ -113,6 +114,8 @@ asmlinkage void __init init_pda(void)
 {
 	unsigned int cpu = raw_smp_processor_id();
 
+	early_shadow_stamp();
+
 	/* Initialize the PDA fields holding references to other parts
 	   of the memory. The content of such memory is still
 	   undefined at the time of the call, we are only setting up
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index c080e70f98b0..beb1a608824c 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -16,6 +16,8 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#define pr_fmt(fmt) "isram: " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -23,6 +25,7 @@
 #include <linux/sched.h>
 
 #include <asm/blackfin.h>
+#include <asm/dma.h>
 
 /*
  * IMPORTANT WARNING ABOUT THESE FUNCTIONS
@@ -50,10 +53,12 @@ static DEFINE_SPINLOCK(dtest_lock);
 #define IADDR2DTEST(x) \
 	({ unsigned long __addr = (unsigned long)(x); \
 		(__addr & 0x47F8)        | /* address bits 14 & 10:3 */ \
+		(__addr & 0x8000) << 23  | /* Bank A/B               */ \
 		(__addr & 0x0800) << 15  | /* address bit  11        */ \
-		(__addr  & 0x3000) << 4  | /* address bits 13:12     */ \
-		(__addr  & 0x8000) << 8  | /* address bit  15        */ \
-		(0x1000004);               /* isram access           */ \
+		(__addr & 0x3000) <<  4  | /* address bits 13:12     */ \
+		(__addr & 0x8000) <<  8  | /* address bit  15        */ \
+		(0x1000000)              | /* instruction access = 1 */ \
+		(0x4);                     /* data array = 1         */ \
 	})
 
 /* Takes a pointer, and returns the offset (in bits) which things should be shifted */
@@ -70,7 +75,7 @@ static void isram_write(const void *addr, uint64_t data)
 	if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))
 		return;
 
-	cmd = IADDR2DTEST(addr) | 1;             /* write */
+	cmd = IADDR2DTEST(addr) | 2;             /* write */
 
 	/*
 	 * Writes to DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
@@ -127,8 +132,7 @@ static bool isram_check_addr(const void *addr, size_t n)
 	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
 		if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
 			show_stack(NULL, NULL);
-			printk(KERN_ERR "isram_memcpy: copy involving %p length "
-					"(%zu) too long\n", addr, n);
+			pr_err("copy involving %p length (%zu) too long\n", addr, n);
 		}
 		return true;
 	}
@@ -199,3 +203,209 @@ void *isram_memcpy(void *dest, const void *src, size_t n)
 }
 EXPORT_SYMBOL(isram_memcpy);
 
+#ifdef CONFIG_BFIN_ISRAM_SELF_TEST
+
+#define TEST_LEN 0x100
+
+static __init void hex_dump(unsigned char *buf, int len)
+{
+	while (len--)
+		pr_cont("%02x", *buf++);
+}
+
+static __init int isram_read_test(char *sdram, void *l1inst)
+{
+	int i, ret = 0;
+	uint64_t data1, data2;
+
+	pr_info("INFO: running isram_read tests\n");
+
+	/* setup some different data to play with */
+	for (i = 0; i < TEST_LEN; ++i)
+		sdram[i] = i;
+	dma_memcpy(l1inst, sdram, TEST_LEN);
+
+	/* make sure we can read the L1 inst */
+	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+		data1 = isram_read(l1inst + i);
+		memcpy(&data2, sdram + i, sizeof(data2));
+		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+			pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
+				l1inst + i, data1, data2);
+			++ret;
+		}
+	}
+
+	return ret;
+}
+
+static __init int isram_write_test(char *sdram, void *l1inst)
+{
+	int i, ret = 0;
+	uint64_t data1, data2;
+
+	pr_info("INFO: running isram_write tests\n");
+
+	/* setup some different data to play with */
+	memset(sdram, 0, TEST_LEN * 2);
+	dma_memcpy(l1inst, sdram, TEST_LEN);
+	for (i = 0; i < TEST_LEN; ++i)
+		sdram[i] = i;
+
+	/* make sure we can write the L1 inst */
+	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+		memcpy(&data1, sdram + i, sizeof(data1));
+		isram_write(l1inst + i, data1);
+		data2 = isram_read(l1inst + i);
+		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+			pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
+				l1inst + i, data1, data2);
+			++ret;
+		}
+	}
+
+	dma_memcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
+	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+		pr_err("FAIL: isram_write() did not work properly\n");
+		++ret;
+	}
+
+	return ret;
+}
+
+static __init int
+_isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
+                   void *(*fmemcpy)(void *, const void *, size_t))
+{
+	memset(sdram, pattern, TEST_LEN);
+	fmemcpy(l1inst, sdram, TEST_LEN);
+	fmemcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
+	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+		pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
+			smemcpy, l1inst, sdram, TEST_LEN, pattern);
+		return 1;
+	}
+	return 0;
+}
+#define _isram_memcpy_test(a, b, c, d) _isram_memcpy_test(a, b, c, #d, d)
+
+static __init int isram_memcpy_test(char *sdram, void *l1inst)
+{
+	int i, j, thisret, ret = 0;
+
+	/* check broad isram_memcpy() */
+	pr_info("INFO: running broad isram_memcpy tests\n");
+	for (i = 0xf; i >= 0; --i)
+		ret += _isram_memcpy_test(i, sdram, l1inst, isram_memcpy);
+
+	/* check read of small, unaligned, and hardware 64bit limits */
+	pr_info("INFO: running isram_memcpy (read) tests\n");
+
+	for (i = 0; i < TEST_LEN; ++i)
+		sdram[i] = i;
+	dma_memcpy(l1inst, sdram, TEST_LEN);
+
+	thisret = 0;
+	for (i = 0; i < TEST_LEN - 32; ++i) {
+		unsigned char cmp[32];
+		for (j = 1; j <= 32; ++j) {
+			memset(cmp, 0, sizeof(cmp));
+			isram_memcpy(cmp, l1inst + i, j);
+			if (memcmp(cmp, sdram + i, j)) {
+				pr_err("FAIL: %p:", l1inst + 1);
+				hex_dump(cmp, j);
+				pr_cont(" SDRAM:");
+				hex_dump(sdram + i, j);
+				pr_cont("\n");
+				if (++thisret > 20) {
+					pr_err("FAIL: skipping remaining series\n");
+					i = TEST_LEN;
+					break;
+				}
+			}
+		}
+	}
+	ret += thisret;
+
+	/* check write of small, unaligned, and hardware 64bit limits */
+	pr_info("INFO: running isram_memcpy (write) tests\n");
+
+	memset(sdram + TEST_LEN, 0, TEST_LEN);
+	dma_memcpy(l1inst, sdram + TEST_LEN, TEST_LEN);
+
+	thisret = 0;
+	for (i = 0; i < TEST_LEN - 32; ++i) {
+		unsigned char cmp[32];
+		for (j = 1; j <= 32; ++j) {
+			isram_memcpy(l1inst + i, sdram + i, j);
+			dma_memcpy(cmp, l1inst + i, j);
+			if (memcmp(cmp, sdram + i, j)) {
+				pr_err("FAIL: %p:", l1inst + i);
+				hex_dump(cmp, j);
+				pr_cont(" SDRAM:");
+				hex_dump(sdram + i, j);
+				pr_cont("\n");
+				if (++thisret > 20) {
+					pr_err("FAIL: skipping remaining series\n");
+					i = TEST_LEN;
+					break;
+				}
+			}
+		}
+	}
+	ret += thisret;
+
+	return ret;
+}
+
+static __init int isram_test_init(void)
+{
+	int ret;
+	char *sdram;
+	void *l1inst;
+
+	sdram = kmalloc(TEST_LEN * 2, GFP_KERNEL);
+	if (!sdram) {
+		pr_warning("SKIP: could not allocate sdram\n");
+		return 0;
+	}
+
+	l1inst = l1_inst_sram_alloc(TEST_LEN);
+	if (!l1inst) {
+		kfree(sdram);
+		pr_warning("SKIP: could not allocate L1 inst\n");
+		return 0;
+	}
+
+	/* sanity check initial L1 inst state */
+	ret = 1;
+	pr_info("INFO: running initial dma_memcpy checks\n");
+	if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
+		goto abort;
+	if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
+		goto abort;
+
+	ret = 0;
+	ret += isram_read_test(sdram, l1inst);
+	ret += isram_write_test(sdram, l1inst);
+	ret += isram_memcpy_test(sdram, l1inst);
+
+ abort:
+	sram_free(l1inst);
+	kfree(sdram);
+
+	if (ret)
+		return -EIO;
+
+	pr_info("PASS: all tests worked !\n");
+	return 0;
+}
+late_initcall(isram_test_init);
+
+static __exit void isram_test_exit(void)
+{
+	/* stub to allow unloading */
+}
+module_exit(isram_test_exit);
+
+#endif
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index 99e4dbb1dfd1..eb63ab353e5a 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -42,11 +42,6 @@
 #include <asm/mem_map.h>
 #include "blackfin_sram.h"
 
-static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock);
-static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock);
-static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock);
-static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp;
-
 /* the data structure for L1 scratchpad and DATA SRAM */
 struct sram_piece {
 	void *paddr;
@@ -55,6 +50,7 @@ struct sram_piece {
 	struct sram_piece *next;
 };
 
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock);
 static DEFINE_PER_CPU(struct sram_piece, free_l1_ssram_head);
 static DEFINE_PER_CPU(struct sram_piece, used_l1_ssram_head);
 
@@ -68,12 +64,18 @@ static DEFINE_PER_CPU(struct sram_piece, free_l1_data_B_sram_head);
 static DEFINE_PER_CPU(struct sram_piece, used_l1_data_B_sram_head);
 #endif
 
+#if L1_DATA_A_LENGTH || L1_DATA_B_LENGTH
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock);
+#endif
+
 #if L1_CODE_LENGTH != 0
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock);
 static DEFINE_PER_CPU(struct sram_piece, free_l1_inst_sram_head);
 static DEFINE_PER_CPU(struct sram_piece, used_l1_inst_sram_head);
 #endif
 
 #if L2_LENGTH != 0
+static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp;
 static struct sram_piece free_l2_sram_head, used_l2_sram_head;
 #endif
 
@@ -225,10 +227,10 @@ static void __init l2_sram_init(void)
 	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
 		L2_LENGTH >> 10,
 		free_l2_sram_head.next->size >> 10);
-#endif
 
 	/* mutex initialize */
 	spin_lock_init(&l2_sram_lock);
+#endif
 }
 
 static int __init bfin_sram_init(void)
@@ -416,18 +418,17 @@ EXPORT_SYMBOL(sram_free);
 
 void *l1_data_A_sram_alloc(size_t size)
 {
+#if L1_DATA_A_LENGTH != 0
 	unsigned long flags;
-	void *addr = NULL;
+	void *addr;
 	unsigned int cpu;
 
 	cpu = get_cpu();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
-#if L1_DATA_A_LENGTH != 0
 	addr = _sram_alloc(size, &per_cpu(free_l1_data_A_sram_head, cpu),
 			&per_cpu(used_l1_data_A_sram_head, cpu));
-#endif
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
@@ -437,11 +438,15 @@ void *l1_data_A_sram_alloc(size_t size)
 		 (long unsigned int)addr, size);
 
 	return addr;
+#else
+	return NULL;
+#endif
 }
 EXPORT_SYMBOL(l1_data_A_sram_alloc);
 
 int l1_data_A_sram_free(const void *addr)
 {
+#if L1_DATA_A_LENGTH != 0
 	unsigned long flags;
 	int ret;
 	unsigned int cpu;
@@ -450,18 +455,17 @@ int l1_data_A_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
-#if L1_DATA_A_LENGTH != 0
 	ret = _sram_free(addr, &per_cpu(free_l1_data_A_sram_head, cpu),
 			&per_cpu(used_l1_data_A_sram_head, cpu));
-#else
-	ret = -1;
-#endif
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
 	put_cpu();
 
 	return ret;
+#else
+	return -1;
+#endif
 }
 EXPORT_SYMBOL(l1_data_A_sram_free);
 
diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h
index 44a0b53df900..c171cdf0a789 100644
--- a/arch/ia64/include/asm/mca.h
+++ b/arch/ia64/include/asm/mca.h
@@ -145,12 +145,14 @@ extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *);
 extern void ia64_init_handler(struct pt_regs *,
 			      struct switch_stack *,
 			      struct ia64_sal_os_state *);
+extern void ia64_os_init_on_kdump(void);
 extern void ia64_monarch_init_handler(void);
 extern void ia64_slave_init_handler(void);
 extern void ia64_mca_cmc_vector_setup(void);
 extern int  ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *));
 extern void ia64_unreg_MCA_extension(void);
 extern unsigned long ia64_get_rnat(unsigned long *);
+extern void ia64_set_psr_mc(void);
 extern void ia64_mca_printk(const char * fmt, ...)
 	 __attribute__ ((format (printf, 1, 2)));
 
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index 7b4c8c70b2d1..d0141fbf51d0 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -61,12 +61,13 @@ void build_cpu_to_node_map(void);
 	.cache_nice_tries	= 2,			\
 	.busy_idx		= 2,			\
 	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
+	.newidle_idx		= 0,			\
+	.wake_idx		= 0,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
 				| SD_WAKE_AFFINE,	\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
@@ -85,14 +86,14 @@ void build_cpu_to_node_map(void);
 	.cache_nice_tries	= 2,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
+	.newidle_idx		= 0,			\
+	.wake_idx		= 0,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 64,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index f065093f8e9b..6631a9dfafdc 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -23,6 +23,7 @@
 int kdump_status[NR_CPUS];
 static atomic_t kdump_cpu_frozen;
 atomic_t kdump_in_progress;
+static int kdump_freeze_monarch;
 static int kdump_on_init = 1;
 static int kdump_on_fatal_mca = 1;
 
@@ -108,10 +109,38 @@ machine_crash_shutdown(struct pt_regs *pt)
 	 */
 	kexec_disable_iosapic();
 #ifdef CONFIG_SMP
+	/*
+	 * If kdump_on_init is set and an INIT is asserted here, kdump will
+	 * be started again via INIT monarch.
+	 */
+	local_irq_disable();
+	ia64_set_psr_mc();	/* mask MCA/INIT */
+	if (atomic_inc_return(&kdump_in_progress) != 1)
+		unw_init_running(kdump_cpu_freeze, NULL);
+
+	/*
+	 * Now this cpu is ready for kdump.
+	 * Stop all others by IPI or INIT.  They could receive INIT from
+	 * outside and might be INIT monarch, but only thing they have to
+	 * do is falling into kdump_cpu_freeze().
+	 *
+	 * If an INIT is asserted here:
+	 * - All receivers might be slaves, since some of cpus could already
+	 *   be frozen and INIT might be masked on monarch.  In this case,
+	 *   all slaves will be frozen soon since kdump_in_progress will let
+	 *   them into DIE_INIT_SLAVE_LEAVE.
+	 * - One might be a monarch, but INIT rendezvous will fail since
+	 *   at least this cpu already have INIT masked so it never join
+	 *   to the rendezvous.  In this case, all slaves and monarch will
+	 *   be frozen soon with no wait since the INIT rendezvous is skipped
+	 *   by kdump_in_progress.
+	 */
 	kdump_smp_send_stop();
 	/* not all cpu response to IPI, send INIT to freeze them */
-	if (kdump_wait_cpu_freeze() && kdump_on_init) 	{
+	if (kdump_wait_cpu_freeze()) {
 		kdump_smp_send_init();
+		/* wait again, don't go ahead if possible */
+		kdump_wait_cpu_freeze();
 	}
 #endif
 }
@@ -129,17 +158,17 @@ void
 kdump_cpu_freeze(struct unw_frame_info *info, void *arg)
 {
 	int cpuid;
+
 	local_irq_disable();
 	cpuid = smp_processor_id();
 	crash_save_this_cpu();
 	current->thread.ksp = (__u64)info->sw - 16;
+
+	ia64_set_psr_mc();	/* mask MCA/INIT and stop reentrance */
+
 	atomic_inc(&kdump_cpu_frozen);
 	kdump_status[cpuid] = 1;
 	mb();
-#ifdef CONFIG_HOTPLUG_CPU
-	if (cpuid != 0)
-		ia64_jump_to_sal(&sal_boot_rendez_state[cpuid]);
-#endif
 	for (;;)
 		cpu_relax();
 }
@@ -150,6 +179,20 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	struct ia64_mca_notify_die *nd;
 	struct die_args *args = data;
 
+	if (atomic_read(&kdump_in_progress)) {
+		switch (val) {
+		case DIE_INIT_MONARCH_LEAVE:
+			if (!kdump_freeze_monarch)
+				break;
+			/* fall through */
+		case DIE_INIT_SLAVE_LEAVE:
+		case DIE_INIT_MONARCH_ENTER:
+		case DIE_MCA_RENDZVOUS_LEAVE:
+			unw_init_running(kdump_cpu_freeze, NULL);
+			break;
+		}
+	}
+
 	if (!kdump_on_init && !kdump_on_fatal_mca)
 		return NOTIFY_DONE;
 
@@ -162,43 +205,31 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	}
 
 	if (val != DIE_INIT_MONARCH_LEAVE &&
-	    val != DIE_INIT_SLAVE_LEAVE &&
 	    val != DIE_INIT_MONARCH_PROCESS &&
-	    val != DIE_MCA_RENDZVOUS_LEAVE &&
 	    val != DIE_MCA_MONARCH_LEAVE)
 		return NOTIFY_DONE;
 
 	nd = (struct ia64_mca_notify_die *)args->err;
-	/* Reason code 1 means machine check rendezvous*/
-	if ((val == DIE_INIT_MONARCH_LEAVE || val == DIE_INIT_SLAVE_LEAVE
-	    || val == DIE_INIT_MONARCH_PROCESS) && nd->sos->rv_rc == 1)
-		return NOTIFY_DONE;
 
 	switch (val) {
 	case DIE_INIT_MONARCH_PROCESS:
-		if (kdump_on_init) {
-			atomic_set(&kdump_in_progress, 1);
-			*(nd->monarch_cpu) = -1;
+		/* Reason code 1 means machine check rendezvous*/
+		if (kdump_on_init && (nd->sos->rv_rc != 1)) {
+			if (atomic_inc_return(&kdump_in_progress) != 1)
+				kdump_freeze_monarch = 1;
 		}
 		break;
 	case DIE_INIT_MONARCH_LEAVE:
-		if (kdump_on_init)
+		/* Reason code 1 means machine check rendezvous*/
+		if (kdump_on_init && (nd->sos->rv_rc != 1))
 			machine_kdump_on_init();
 		break;
-	case DIE_INIT_SLAVE_LEAVE:
-		if (atomic_read(&kdump_in_progress))
-			unw_init_running(kdump_cpu_freeze, NULL);
-		break;
-	case DIE_MCA_RENDZVOUS_LEAVE:
-		if (atomic_read(&kdump_in_progress))
-			unw_init_running(kdump_cpu_freeze, NULL);
-		break;
 	case DIE_MCA_MONARCH_LEAVE:
 		/* *(nd->data) indicate if MCA is recoverable */
 		if (kdump_on_fatal_mca && !(*(nd->data))) {
-			atomic_set(&kdump_in_progress, 1);
-			*(nd->monarch_cpu) = -1;
-			machine_kdump_on_init();
+			if (atomic_inc_return(&kdump_in_progress) == 1)
+				machine_kdump_on_init();
+			/* We got fatal MCA while kdump!? No way!! */
 		}
 		break;
 	}
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index e6c5c3d5e1f8..1a6e44515eb4 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -34,7 +34,6 @@
 #include <asm/mca_asm.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
-#include "head.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET				\
@@ -168,7 +167,7 @@ RestRR:											\
 	mov _tmp2=((ia64_rid(IA64_REGION_ID_KERNEL, (num<<61)) << 8) | (pgsize << 2) | vhpt);; \
 	mov rr[_tmp1]=_tmp2
 
-	.section __special_page_section,"ax"
+	__PAGE_ALIGNED_DATA
 
 	.global empty_zero_page
 empty_zero_page:
@@ -182,7 +181,7 @@ swapper_pg_dir:
 halt_msg:
 	stringz "Halting kernel\n"
 
-	.section .text.head,"ax"
+	__REF
 
 	.global start_ap
 
@@ -1243,7 +1242,7 @@ GLOBAL_ENTRY(ia64_jump_to_sal)
 	movl r16=SAL_PSR_BITS_TO_SET;;
 	mov cr.ipsr=r16
 	mov cr.ifs=r0;;
-	rfi;;
+	rfi;;			// note: this unmask MCA/INIT (psr.mc)
 1:
 	/*
 	 * Invalidate all TLB data/inst
diff --git a/arch/ia64/kernel/head.h b/arch/ia64/kernel/head.h
deleted file mode 100644
index 2e2ac6824e65..000000000000
--- a/arch/ia64/kernel/head.h
+++ /dev/null
@@ -1 +0,0 @@
-extern void console_print(const char *s);
diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c
index 0823de1f6ebe..3d3aeef46947 100644
--- a/arch/ia64/kernel/machine_kexec.c
+++ b/arch/ia64/kernel/machine_kexec.c
@@ -24,6 +24,8 @@
 #include <asm/delay.h>
 #include <asm/meminit.h>
 #include <asm/processor.h>
+#include <asm/sal.h>
+#include <asm/mca.h>
 
 typedef NORET_TYPE void (*relocate_new_kernel_t)(
 					unsigned long indirection_page,
@@ -85,13 +87,26 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg)
 	void *pal_addr = efi_get_pal_addr();
 	unsigned long code_addr = (unsigned long)page_address(image->control_code_page);
 	int ii;
+	u64 fp, gp;
+	ia64_fptr_t *init_handler = (ia64_fptr_t *)ia64_os_init_on_kdump;
 
 	BUG_ON(!image);
 	if (image->type == KEXEC_TYPE_CRASH) {
 		crash_save_this_cpu();
 		current->thread.ksp = (__u64)info->sw - 16;
+
+		/* Register noop init handler */
+		fp = ia64_tpa(init_handler->fp);
+		gp = ia64_tpa(ia64_getreg(_IA64_REG_GP));
+		ia64_sal_set_vectors(SAL_VECTOR_OS_INIT, fp, gp, 0, fp, gp, 0);
+	} else {
+		/* Unregister init handlers of current kernel */
+		ia64_sal_set_vectors(SAL_VECTOR_OS_INIT, 0, 0, 0, 0, 0, 0);
 	}
 
+	/* Unregister mca handler - No more recovery on current kernel */
+	ia64_sal_set_vectors(SAL_VECTOR_OS_MCA, 0, 0, 0, 0, 0, 0);
+
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 7b30d21c5190..d2877a7bfe2e 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1682,14 +1682,25 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 
 	if (!sos->monarch) {
 		ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT;
+
+#ifdef CONFIG_KEXEC
+		while (monarch_cpu == -1 && !atomic_read(&kdump_in_progress))
+			udelay(1000);
+#else
 		while (monarch_cpu == -1)
-		       cpu_relax();	/* spin until monarch enters */
+			cpu_relax();	/* spin until monarch enters */
+#endif
 
 		NOTIFY_INIT(DIE_INIT_SLAVE_ENTER, regs, (long)&nd, 1);
 		NOTIFY_INIT(DIE_INIT_SLAVE_PROCESS, regs, (long)&nd, 1);
 
+#ifdef CONFIG_KEXEC
+		while (monarch_cpu != -1 && !atomic_read(&kdump_in_progress))
+			udelay(1000);
+#else
 		while (monarch_cpu != -1)
-		       cpu_relax();	/* spin until monarch leaves */
+			cpu_relax();	/* spin until monarch leaves */
+#endif
 
 		NOTIFY_INIT(DIE_INIT_SLAVE_LEAVE, regs, (long)&nd, 1);
 
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index a06d46548ff9..7461d2573d41 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -40,6 +40,7 @@
 
 	.global ia64_do_tlb_purge
 	.global ia64_os_mca_dispatch
+	.global ia64_os_init_on_kdump
 	.global ia64_os_init_dispatch_monarch
 	.global ia64_os_init_dispatch_slave
 
@@ -299,6 +300,25 @@ END(ia64_os_mca_virtual_begin)
 //StartMain////////////////////////////////////////////////////////////////////
 
 //
+// NOP init handler for kdump.  In panic situation, we may receive INIT
+// while kernel transition.  Since we initialize registers on leave from
+// current kernel, no longer monarch/slave handlers of current kernel in
+// virtual mode are called safely.
+// We can unregister these init handlers from SAL, however then the INIT
+// will result in warmboot by SAL and we cannot retrieve the crashdump.
+// Therefore register this NOP function to SAL, to prevent entering virtual
+// mode and resulting warmboot by SAL.
+//
+ia64_os_init_on_kdump:
+	mov		r8=r0		// IA64_INIT_RESUME
+	mov             r9=r10		// SAL_GP
+	mov		r22=r17		// *minstate
+	;;
+	mov		r10=r0		// return to same context
+	mov		b0=r12		// SAL_CHECK return address
+	br		b0
+
+//
 // SAL to OS entry point for INIT on all processors.  This has been defined for
 // registration purposes with SAL as a part of ia64_mca_init.  Monarch and
 // slave INIT have identical processing, except for the value of the
@@ -1073,3 +1093,30 @@ GLOBAL_ENTRY(ia64_get_rnat)
 	mov ar.rsc=3
 	br.ret.sptk.many rp
 END(ia64_get_rnat)
+
+
+// void ia64_set_psr_mc(void)
+//
+// Set psr.mc bit to mask MCA/INIT.
+GLOBAL_ENTRY(ia64_set_psr_mc)
+	rsm psr.i | psr.ic		// disable interrupts
+	;;
+	srlz.d
+	;;
+	mov r14 = psr			// get psr{36:35,31:0}
+	movl r15 = 1f
+	;;
+	dep r14 = -1, r14, PSR_MC, 1	// set psr.mc
+	;;
+	dep r14 = -1, r14, PSR_IC, 1	// set psr.ic
+	;;
+	dep r14 = -1, r14, PSR_BN, 1	// keep bank1 in use
+	;;
+	mov cr.ipsr = r14
+	mov cr.ifs = r0
+	mov cr.iip = r15
+	;;
+	rfi
+1:
+	br.ret.sptk.many rp
+END(ia64_set_psr_mc)
diff --git a/arch/ia64/kernel/relocate_kernel.S b/arch/ia64/kernel/relocate_kernel.S
index 903babd22d62..32f6fc131fbe 100644
--- a/arch/ia64/kernel/relocate_kernel.S
+++ b/arch/ia64/kernel/relocate_kernel.S
@@ -52,7 +52,7 @@ GLOBAL_ENTRY(relocate_new_kernel)
 	srlz.i
 	;;
 	mov ar.rnat=r18
-	rfi
+	rfi				// note: this unmask MCA/INIT (psr.mc)
 	;;
 1:
 	//physical mode code begin
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index eb4214d1c5af..0a0c77b2c988 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -51,8 +51,6 @@ SECTIONS
 	KPROBES_TEXT
 	*(.gnu.linkonce.t*)
     }
-  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET)
-	{ *(.text.head) }
   .text2 : AT(ADDR(.text2) - LOAD_OFFSET)
 	{ *(.text2) }
 #ifdef CONFIG_SMP
@@ -66,14 +64,7 @@ SECTIONS
   NOTES :code :note		/* put .notes in text and mark in PT_NOTE  */
   code_continues : {} :code	/* switch back to regular program...  */
 
-  /* Exception table */
-  . = ALIGN(16);
-  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET)
-	{
-	  __start___ex_table = .;
-	  *(__ex_table)
-	  __stop___ex_table = .;
-	}
+  EXCEPTION_TABLE(16)
 
   /* MCA table */
   . = ALIGN(16);
@@ -115,38 +106,9 @@ SECTIONS
 
   . = ALIGN(PAGE_SIZE);
   __init_begin = .;
-  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET)
-	{
-	  _sinittext = .;
-	  INIT_TEXT
-	  _einittext = .;
-	}
-
-  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET)
-	{ INIT_DATA }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET)
-	{
-	  __initramfs_start = .;
-	  *(.init.ramfs)
-	  __initramfs_end = .;
-	}
-#endif
-
-   . = ALIGN(16);
-  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET)
-        {
-	  __setup_start = .;
-	  *(.init.setup)
-	  __setup_end = .;
-	}
-  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET)
-	{
-	  __initcall_start = .;
-	INITCALLS
-	  __initcall_end = .;
-	}
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
 
   .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
 	{
@@ -204,24 +166,13 @@ SECTIONS
 	}
 #endif
 
-  . = ALIGN(8);
-   __con_initcall_start = .;
-  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET)
-	{ *(.con_initcall.init) }
-  __con_initcall_end = .;
-  __security_initcall_start = .;
-  .security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET)
-	{ *(.security_initcall.init) }
-  __security_initcall_end = .;
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
-  /* The initial task and kernel stack */
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET)
-	{ *(.data.init_task) }
-
   .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
-        { *(__special_page_section)
+        {
+	PAGE_ALIGNED_DATA(PAGE_SIZE)
+	  . = ALIGN(PAGE_SIZE);
 	  __start_gate_section = .;
 	  *(.data.gate)
 	  __stop_gate_section = .;
@@ -236,12 +187,6 @@ SECTIONS
   				 * kernel data
 				 */
 
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET)
-        { *(.data.read_mostly) }
-
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET)
-        { *(.data.cacheline_aligned) }
-
   /* Per-cpu data: */
   . = ALIGN(PERCPU_PAGE_SIZE);
   PERCPU_VADDR(PERCPU_ADDR, :percpu)
@@ -258,6 +203,9 @@ SECTIONS
 		__cpu0_per_cpu = .;
   . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
 #endif
+		INIT_TASK_DATA(PAGE_SIZE)
+		CACHELINE_ALIGNED_DATA(SMP_CACHE_BYTES)
+		READ_MOSTLY_DATA(SMP_CACHE_BYTES)
 		DATA_DATA
 		*(.data1)
 		*(.gnu.linkonce.d*)
@@ -274,48 +222,15 @@ SECTIONS
   .sdata : AT(ADDR(.sdata) - LOAD_OFFSET)
 	{ *(.sdata) *(.sdata1) *(.srdata) }
   _edata  =  .;
-  __bss_start = .;
-  .sbss : AT(ADDR(.sbss) - LOAD_OFFSET)
-	{ *(.sbss) *(.scommon) }
-  .bss : AT(ADDR(.bss) - LOAD_OFFSET)
-	{ *(.bss) *(COMMON) }
-  __bss_stop = .;
+
+  BSS_SECTION(0, 0, 0)
 
   _end = .;
 
   code : { } :code
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
+
+  STABS_DEBUG
+  DWARF_DEBUG
 
   /* Default discards */
   DISCARDS
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
index 239b3cedcf2b..5bc34eac9e01 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
@@ -54,6 +54,8 @@ static int find_free_ate(struct ate_resource *ate_resource, int start,
 					break;
 				}
 			}
+			if (i >= ate_resource->num_ate)
+				return -1;
 		} else
 			index++;	/* Try next ate */
 	}
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
index 1cf544767453..ec514485c8b6 100644
--- a/arch/m68k/include/asm/checksum.h
+++ b/arch/m68k/include/asm/checksum.h
@@ -1,5 +1,170 @@
-#ifdef __uClinux__
-#include "checksum_no.h"
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+						void *dst,
+						int len, __wsum sum,
+						int *csum_err);
+
+extern __wsum csum_partial_copy_nocheck(const void *src,
+					      void *dst, int len,
+					      __wsum sum);
+
+
+#ifdef CONFIG_COLDFIRE
+
+/*
+ *	The ColdFire cores don't support all the 68k instructions used
+ *	in the optimized checksum code below. So it reverts back to using
+ *	more standard C coded checksums. The fast checksum code is
+ *	significantly larger than the optimized version, so it is not
+ *	inlined here.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp = (__force u32)sum;
+
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+
+	return (__force __sum16)~tmp;
+}
+
 #else
-#include "checksum_mm.h"
-#endif
+
+/*
+ *	This is a version of ip_fast_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum = 0;
+	unsigned long tmp;
+
+	__asm__ ("subqw #1,%2\n"
+		 "1:\t"
+		 "movel %1@+,%3\n\t"
+		 "addxl %3,%0\n\t"
+		 "dbra  %2,1b\n\t"
+		 "movel %0,%3\n\t"
+		 "swap  %3\n\t"
+		 "addxw %3,%0\n\t"
+		 "clrw  %3\n\t"
+		 "addxw %3,%0\n\t"
+		 : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
+		 : "0" (sum), "1" (iph), "2" (ihl)
+		 : "memory");
+	return (__force __sum16)~sum;
+}
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp = (__force u32)sum;
+
+	__asm__("swap %1\n\t"
+		"addw %1, %0\n\t"
+		"clrw %1\n\t"
+		"addxw %1, %0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "0" (sum), "1" (tmp));
+
+	return (__force __sum16)~sum;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	__asm__ ("addl  %2,%0\n\t"
+		 "addxl %3,%0\n\t"
+		 "addxl %4,%0\n\t"
+		 "clrl %1\n\t"
+		 "addxl %1,%0"
+		 : "=&d" (sum), "=d" (saddr)
+		 : "g" (daddr), "1" (saddr), "d" (len + proto),
+		   "0" (sum));
+	return sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, unsigned short proto, __wsum sum)
+{
+	register unsigned long tmp;
+	__asm__("addl %2@,%0\n\t"
+		"movel %2@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@,%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"addxl %4,%0\n\t"
+		"clrl %1\n\t"
+		"addxl %1,%0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "a" (saddr), "a" (daddr), "d" (len + proto),
+		  "0" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/checksum_mm.h b/arch/m68k/include/asm/checksum_mm.h
deleted file mode 100644
index 494f9aec37ea..000000000000
--- a/arch/m68k/include/asm/checksum_mm.h
+++ /dev/null
@@ -1,148 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
-						void *dst,
-						int len, __wsum sum,
-						int *csum_err);
-
-extern __wsum csum_partial_copy_nocheck(const void *src,
-					      void *dst, int len,
-					      __wsum sum);
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int sum = 0;
-	unsigned long tmp;
-
-	__asm__ ("subqw #1,%2\n"
-		 "1:\t"
-		 "movel %1@+,%3\n\t"
-		 "addxl %3,%0\n\t"
-		 "dbra  %2,1b\n\t"
-		 "movel %0,%3\n\t"
-		 "swap  %3\n\t"
-		 "addxw %3,%0\n\t"
-		 "clrw  %3\n\t"
-		 "addxw %3,%0\n\t"
-		 : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
-		 : "0" (sum), "1" (iph), "2" (ihl)
-		 : "memory");
-	return (__force __sum16)~sum;
-}
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-	__asm__("swap %1\n\t"
-		"addw %1, %0\n\t"
-		"clrw %1\n\t"
-		"addxw %1, %0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "0" (sum), "1" (tmp));
-	return (__force __sum16)~sum;
-}
-
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("addl  %2,%0\n\t"
-		 "addxl %3,%0\n\t"
-		 "addxl %4,%0\n\t"
-		 "clrl %1\n\t"
-		 "addxl %1,%0"
-		 : "=&d" (sum), "=d" (saddr)
-		 : "g" (daddr), "1" (saddr), "d" (len + proto),
-		   "0" (sum));
-	return sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
-{
-	register unsigned long tmp;
-	__asm__("addl %2@,%0\n\t"
-		"movel %2@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@,%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"addxl %4,%0\n\t"
-		"clrl %1\n\t"
-		"addxl %1,%0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "a" (saddr), "a" (daddr), "d" (len + proto),
-		  "0" (sum));
-
-	return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/checksum_no.h b/arch/m68k/include/asm/checksum_no.h
deleted file mode 100644
index 81883482ffb1..000000000000
--- a/arch/m68k/include/asm/checksum_no.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-	int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
-	void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-#ifdef CONFIG_COLDFIRE
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	return (__force __sum16)~tmp;
-#else
-	__asm__("swap %1\n\t"
-		"addw %1, %0\n\t"
-		"clrw %1\n\t"
-		"addxw %1, %0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "0" (sum), "1" (sum));
-	return (__force __sum16)~sum;
-#endif
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("addl  %1,%0\n\t"
-		 "addxl %4,%0\n\t"
-		 "addxl %5,%0\n\t"
-		 "clrl %1\n\t"
-		 "addxl %1,%0"
-		 : "=&d" (sum), "=&d" (saddr)
-		 : "0" (daddr), "1" (saddr), "d" (len + proto),
-		   "d"(sum));
-	return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
-{
-	register unsigned long tmp;
-	__asm__("addl %2@,%0\n\t"
-		"movel %2@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@,%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"addxl %4,%0\n\t"
-		"clrl %1\n\t"
-		"addxl %1,%0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "a" (saddr), "a" (daddr), "d" (len + proto),
-		  "0" (sum));
-
-	return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index b82e660cf1c2..6fbdfe895104 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -1,5 +1,491 @@
-#ifdef __uClinux__
-#include "dma_no.h"
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ *               Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
 #else
-#include "dma_mm.h"
+#define MAX_M68K_DMA_CHANNELS 2
 #endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	            0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD          2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG          4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         5
+/* I/O to memory, 8 bits, single-address-mode */
+#define DMA_MODE_READ_SINGLE        8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE       9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE  10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE  12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF  0x01
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF  0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG  0x00
+#define DMA_MODE_SIZE_BYTE  0x01
+#define DMA_MODE_SIZE_WORD  0x02
+#define DMA_MODE_SIZE_LINE  0x03
+
+/*
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned char  *dmapb;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned char  *dmabp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+  dmabp = (unsigned char *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  /* Clear config errors */
+  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+
+  /* Set command register */
+  dmawp[MCFDMA_DCR] =
+    MCFDMA_DCR_INT |         /* Enable completion irq */
+    MCFDMA_DCR_CS |          /* Force one xfer per request */
+    MCFDMA_DCR_AA |          /* Enable auto alignment */
+    /* single-address-mode */
+    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+    /* sets s_rw (-> r/w) high if Memory to I/0 */
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+    /* Memory to I/O or I/O to Memory */
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+    /* 32 bit, 16 bit or 8 bit transfers */
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+                                   MCFDMA_DCR_SSIZE_BYTE)) |
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+                                   MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Determine which address registers are used for memory/device accesses */
+  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+    /* Source incrementing, must be memory */
+    dmalp[MCFDMA_SAR] = a;
+    /* Set dest address, must be device */
+    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+  } else {
+    /* Destination incrementing, must be memory */
+    dmalp[MCFDMA_DAR] = a;
+    /* Set source address, must be device */
+    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  unsigned short count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  count = dmawp[MCFDMA_BCR];
+  return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping.  For instance, with the exception of the 16-bit
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA.  All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose.  This puts a crimp in distinguishing between the 'device
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value.  Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit.  Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned int  *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned int   *dmalp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  /* Clear config errors */
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+
+  /* Set command register */
+  dmalp[MCFDMA_DMR] =
+    MCFDMA_DMR_RQM_DUAL |         /* Mandatory Request Mode setting */
+    MCFDMA_DMR_DSTT_SD  |         /* Set up addressing types; set to supervisor-data. */
+    MCFDMA_DMR_SRCT_SD  |         /* Set up addressing types; set to supervisor-data. */
+    /* source static-address-mode */
+    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+    /* dest static-address-mode */
+    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+    /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+
+  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Determine which address registers are used for memory/device accesses */
+  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+    /* Source incrementing, must be memory */
+    dmalp[MCFDMA_DSAR] = a;
+    /* Set dest address, must be device */
+    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+  } else {
+    /* Destination incrementing, must be memory */
+    dmalp[MCFDMA_DDAR] = a;
+    /* Set source address, must be device */
+    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned int *dmalp;
+  unsigned int count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  count = dmalp[MCFDMA_DBCR];
+  return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+
+/* it's useless on the m68k, but unfortunately needed by the new
+   bootmem allocator (but this should do it for this) */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+#define MAX_DMA_CHANNELS 8
+
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+#define isa_dma_bridge_buggy    (0)
+
+#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h
deleted file mode 100644
index 4240fbc946f8..000000000000
--- a/arch/m68k/include/asm/dma_mm.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-
-/* it's useless on the m68k, but unfortunately needed by the new
-   bootmem allocator (but this should do it for this) */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-#define MAX_DMA_CHANNELS 8
-
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-#define isa_dma_bridge_buggy    (0)
-
-#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h
deleted file mode 100644
index 939a02056217..000000000000
--- a/arch/m68k/include/asm/dma_no.h
+++ /dev/null
@@ -1,494 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
- 
-//#define	DMA_DEBUG	1
-
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- *               Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
-	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	            0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD          2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG          4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         5
-/* I/O to memory, 8 bits, single-address-mode */     
-#define DMA_MODE_READ_SINGLE        8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE       9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE  10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE  12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01  
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06 
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF  0x01  
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10  
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60  
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF  0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG  0x00
-#define DMA_MODE_SIZE_BYTE  0x01
-#define DMA_MODE_SIZE_WORD  0x02
-#define DMA_MODE_SIZE_LINE  0x03
-
-/* 
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned char  *dmapb;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmapb = (unsigned char *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
-  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned char  *dmabp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
-  dmabp = (unsigned char *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
-
-  // Set command register
-  dmawp[MCFDMA_DCR] =
-    MCFDMA_DCR_INT |         // Enable completion irq
-    MCFDMA_DCR_CS |          // Force one xfer per request
-    MCFDMA_DCR_AA |          // Enable auto alignment
-    // single-address-mode
-    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
-    // sets s_rw (-> r/w) high if Memory to I/0
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
-    // Memory to I/O or I/O to Memory
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
-    // 32 bit, 16 bit or 8 bit transfers
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
-                                   MCFDMA_DCR_SSIZE_BYTE)) |
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
-                                   MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
-	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_SAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
-	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
-	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  unsigned short count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  count = dmawp[MCFDMA_BCR];
-  return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping.  For instance, with the exception of the 16-bit 
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA.  All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose.  This puts a crimp in distinguishing between the 'device 
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value.  Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit.  Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned int  *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned int   *dmalp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
-
-  // Set command register
-  dmalp[MCFDMA_DMR] =
-    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
-    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
-    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
-    // source static-address-mode
-    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
-    // dest static-address-mode
-    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
-    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-    
-  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
-  
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
-	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_DSAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DDAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
-	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
-	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned int *dmalp;
-  
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned int *dmalp;
-  unsigned int count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  count = dmalp[MCFDMA_DBCR];
-  return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
- 
-#define MAX_DMA_CHANNELS 8
-
-/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
-   occurrence should be flagged as an error.  */
-/* under 2.4 it is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
- 
-#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/elia.h b/arch/m68k/include/asm/elia.h
deleted file mode 100644
index e037d4e2de33..000000000000
--- a/arch/m68k/include/asm/elia.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/****************************************************************************/
-
-/*
- *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
- *
- *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
- *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	elia_h
-#define	elia_h
-/****************************************************************************/
-
-#include <asm/coldfire.h>
-
-#ifdef CONFIG_eLIA
-
-/*
- *	The serial port DTR and DCD lines are also on the Parallel I/O
- *	as well, so define those too.
- */
-
-#define	eLIA_DCD1		0x0001
-#define	eLIA_DCD0		0x0002
-#define	eLIA_DTR1		0x0004
-#define	eLIA_DTR0		0x0008
-
-#define	eLIA_PCIRESET		0x0020
-
-/*
- *	Kernel macros to set and unset the LEDs.
- */
-#ifndef __ASSEMBLY__
-extern unsigned short	ppdata;
-#endif /* __ASSEMBLY__ */
-
-#endif	/* CONFIG_eLIA */
-
-/****************************************************************************/
-#endif	/* elia_h */
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
new file mode 100644
index 000000000000..283214dc65a7
--- /dev/null
+++ b/arch/m68k/include/asm/gpio.h
@@ -0,0 +1,238 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef coldfire_gpio_h
+#define coldfire_gpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The Freescale Coldfire family is quite varied in how they implement GPIO.
+ * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
+ * only one port, others have multiple ports; some have a single data latch
+ * for both input and output, others have a separate pin data register to read
+ * input; some require a read-modify-write access to change an output, others
+ * have set and clear registers for some of the outputs; Some have all the
+ * GPIOs in a single control area, others have some GPIOs implemented in
+ * different modules.
+ *
+ * This implementation attempts accomodate the differences while presenting
+ * a generic interface that will optimize to as few instructions as possible.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+    defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+
+/* These parts have GPIO organized by 8 bit ports */
+
+#define MCFGPIO_PORTTYPE		u8
+#define MCFGPIO_PORTSIZE		8
+#define mcfgpio_read(port)		__raw_readb(port)
+#define mcfgpio_write(data, port)	__raw_writeb(data, port)
+
+#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
+
+/* These parts have GPIO organized by 16 bit ports */
+
+#define MCFGPIO_PORTTYPE		u16
+#define MCFGPIO_PORTSIZE		16
+#define mcfgpio_read(port)		__raw_readw(port)
+#define mcfgpio_write(data, port)	__raw_writew(data, port)
+
+#elif defined(CONFIG_M5249)
+
+/* These parts have GPIO organized by 32 bit ports */
+
+#define MCFGPIO_PORTTYPE		u32
+#define MCFGPIO_PORTSIZE		32
+#define mcfgpio_read(port)		__raw_readl(port)
+#define mcfgpio_write(data, port)	__raw_writel(data, port)
+
+#endif
+
+#define mcfgpio_bit(gpio)		(1 << ((gpio) %  MCFGPIO_PORTSIZE))
+#define mcfgpio_port(gpio)		((gpio) / MCFGPIO_PORTSIZE)
+
+#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+    defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+/*
+ * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
+ * read-modify-write to change an output and a GPIO module which has separate
+ * set/clr registers to directly change outputs with a single write access.
+ */
+#if defined(CONFIG_M528x)
+/*
+ * The 528x also has GPIOs in other modules (GPT, QADC) which use
+ * read-modify-write as well as those controlled by the EPORT and GPIO modules.
+ */
+#define MCFGPIO_SCR_START		40
+#else
+#define MCFGPIO_SCR_START		8
+#endif
+
+#define MCFGPIO_SETR_PORT(gpio)		(MCFGPIO_SETR + \
+					mcfgpio_port(gpio - MCFGPIO_SCR_START))
+
+#define MCFGPIO_CLRR_PORT(gpio)		(MCFGPIO_CLRR + \
+					mcfgpio_port(gpio - MCFGPIO_SCR_START))
+#else
+
+#define MCFGPIO_SCR_START		MCFGPIO_PIN_MAX
+/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
+#define MCFGPIO_SETR_PORT(gpio)		0
+#define MCFGPIO_CLRR_PORT(gpio)		0
+
+#endif
+/*
+ * Coldfire specific helper functions
+ */
+
+/* return the port pin data register for a gpio */
+static inline u32 __mcf_gpio_ppdr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M5307) || defined(CONFIG_M5407)
+	return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+	if (gpio < 16)
+		return MCFSIM_PADAT;
+	else if (gpio < 32)
+		return MCFSIM_PBDAT;
+	else
+		return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+	if (gpio < 32)
+		return MCFSIM2_GPIOREAD;
+	else
+		return MCFSIM2_GPIO1READ;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+	if (gpio < 8)
+		return MCFEPORT_EPPDR;
+#if defined(CONFIG_M528x)
+	else if (gpio < 16)
+		return MCFGPTA_GPTPORT;
+	else if (gpio < 24)
+		return MCFGPTB_GPTPORT;
+	else if (gpio < 32)
+		return MCFQADC_PORTQA;
+	else if (gpio < 40)
+		return MCFQADC_PORTQB;
+#endif
+	else
+		return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/* return the port output data register for a gpio */
+static inline u32 __mcf_gpio_podr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M5307) || defined(CONFIG_M5407)
+	return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+	if (gpio < 16)
+		return MCFSIM_PADAT;
+	else if (gpio < 32)
+		return MCFSIM_PBDAT;
+	else
+		return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+	if (gpio < 32)
+		return MCFSIM2_GPIOWRITE;
+	else
+		return MCFSIM2_GPIO1WRITE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+	if (gpio < 8)
+		return MCFEPORT_EPDR;
+#if defined(CONFIG_M528x)
+	else if (gpio < 16)
+		return MCFGPTA_GPTPORT;
+	else if (gpio < 24)
+		return MCFGPTB_GPTPORT;
+	else if (gpio < 32)
+		return MCFQADC_PORTQA;
+	else if (gpio < 40)
+		return MCFQADC_PORTQB;
+#endif
+	else
+		return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/*
+ * The Generic GPIO functions
+ *
+ * If the gpio is a compile time constant and is one of the Coldfire gpios,
+ * use the inline version, otherwise dispatch thru gpiolib.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
+		return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
+		if (gpio < MCFGPIO_SCR_START) {
+			unsigned long flags;
+			MCFGPIO_PORTTYPE data;
+
+			local_irq_save(flags);
+			data = mcfgpio_read(__mcf_gpio_podr(gpio));
+			if (value)
+				data |= mcfgpio_bit(gpio);
+			else
+				data &= ~mcfgpio_bit(gpio);
+			mcfgpio_write(data, __mcf_gpio_podr(gpio));
+			local_irq_restore(flags);
+		} else {
+			if (value)
+				mcfgpio_write(mcfgpio_bit(gpio),
+						MCFGPIO_SETR_PORT(gpio));
+			else
+				mcfgpio_write(~mcfgpio_bit(gpio),
+						MCFGPIO_CLRR_PORT(gpio));
+		}
+	} else
+		__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return (irq >= MCFGPIO_IRQ_VECBASE &&
+		irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ?
+		irq - MCFGPIO_IRQ_VECBASE : -ENXIO;
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
+}
+
+#endif
diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h
index bfad28149a49..b44b14be87d9 100644
--- a/arch/m68k/include/asm/hardirq_no.h
+++ b/arch/m68k/include/asm/hardirq_no.h
@@ -1,16 +1,8 @@
 #ifndef __M68K_HARDIRQ_H
 #define __M68K_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <linux/threads.h>
 #include <asm/irq.h>
 
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 #define HARDIRQ_BITS	8
 
 /*
@@ -22,6 +14,6 @@ typedef struct {
 # error HARDIRQ_BITS is too low!
 #endif
 
-void ack_bad_irq(unsigned int irq);
+#include <asm-generic/hardirq.h>
 
 #endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 6adef1ee2082..7f57436ec18f 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -134,7 +134,7 @@ static inline void io_insl(unsigned int addr, void *buf, int len)
 #define insw(a,b,l) io_insw(a,b,l)
 #define insl(a,b,l) io_insl(a,b,l)
 
-#define IO_SPACE_LIMIT 0xffff
+#define IO_SPACE_LIMIT 0xffffffff
 
 
 /* Values for nocacheflag and cmode */
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index d031416595b2..907eff1edd2f 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -1,5 +1,134 @@
-#ifdef __uClinux__
-#include "irq_no.h"
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+/*
+ * This should be the same as the max(NUM_X_SOURCES) for all the
+ * different m68k hosts compiled into the kernel.
+ * Currently the Atari has 72 and the Amiga 24, but if both are
+ * supported in the kernel it is better to make room for 72.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define NR_IRQS 256
+#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+#define NR_IRQS 200
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#define NR_IRQS 72
+#elif defined(CONFIG_Q40)
+#define NR_IRQS	43
+#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU)
+#define NR_IRQS	32
+#elif defined(CONFIG_APOLLO)
+#define NR_IRQS	24
+#elif defined(CONFIG_HP300)
+#define NR_IRQS	8
 #else
-#include "irq_mm.h"
+#define NR_IRQS	0
 #endif
+
+#ifdef CONFIG_MMU
+
+#include <linux/linkage.h>
+#include <linux/hardirq.h>
+#include <linux/irqreturn.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession.  Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ_SPURIOUS	0
+
+#define IRQ_AUTO_1	1	/* level 1 interrupt */
+#define IRQ_AUTO_2	2	/* level 2 interrupt */
+#define IRQ_AUTO_3	3	/* level 3 interrupt */
+#define IRQ_AUTO_4	4	/* level 4 interrupt */
+#define IRQ_AUTO_5	5	/* level 5 interrupt */
+#define IRQ_AUTO_6	6	/* level 6 interrupt */
+#define IRQ_AUTO_7	7	/* level 7 interrupt (non-maskable) */
+
+#define IRQ_USER	8
+
+extern unsigned int irq_canonicalize(unsigned int irq);
+
+struct pt_regs;
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
+ */
+#ifndef MACH_AMIGA_ONLY
+#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
+#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
+#define IRQ_FLG_FAST	(0x0004)
+#define IRQ_FLG_SLOW	(0x0008)
+#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
+#endif
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+	irqreturn_t	(*handler)(int, void *);
+	void		*dev_id;
+	struct irq_node *next;
+	unsigned long	flags;
+	const char	*devname;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+struct irq_handler {
+	int		(*handler)(int, void *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+};
+
+struct irq_controller {
+	const char *name;
+	spinlock_t lock;
+	int (*startup)(unsigned int irq);
+	void (*shutdown)(unsigned int irq);
+	void (*enable)(unsigned int irq);
+	void (*disable)(unsigned int irq);
+};
+
+extern int m68k_irq_startup(unsigned int);
+extern void m68k_irq_shutdown(unsigned int);
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
+				      void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
+
+asmlinkage void m68k_handle_int(unsigned int);
+asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+
+#else
+#define irq_canonicalize(irq)  (irq)
+#endif /* CONFIG_MMU */
+
+#endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h
deleted file mode 100644
index 0cab42cad79e..000000000000
--- a/arch/m68k/include/asm/irq_mm.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _M68K_IRQ_H_
-#define _M68K_IRQ_H_
-
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
-/*
- * This should be the same as the max(NUM_X_SOURCES) for all the
- * different m68k hosts compiled into the kernel.
- * Currently the Atari has 72 and the Amiga 24, but if both are
- * supported in the kernel it is better to make room for 72.
- */
-#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-#define NR_IRQS 200
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
-#define NR_IRQS 72
-#elif defined(CONFIG_Q40)
-#define NR_IRQS	43
-#elif defined(CONFIG_AMIGA)
-#define NR_IRQS	32
-#elif defined(CONFIG_APOLLO)
-#define NR_IRQS	24
-#elif defined(CONFIG_HP300)
-#define NR_IRQS	8
-#else
-#define NR_IRQS	0
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-/*
- * Interrupt source definitions
- * General interrupt sources are the level 1-7.
- * Adding an interrupt service routine for one of these sources
- * results in the addition of that routine to a chain of routines.
- * Each one is called in succession.  Each individual interrupt
- * service routine should determine if the device associated with
- * that routine requires service.
- */
-
-#define IRQ_SPURIOUS	0
-
-#define IRQ_AUTO_1	1	/* level 1 interrupt */
-#define IRQ_AUTO_2	2	/* level 2 interrupt */
-#define IRQ_AUTO_3	3	/* level 3 interrupt */
-#define IRQ_AUTO_4	4	/* level 4 interrupt */
-#define IRQ_AUTO_5	5	/* level 5 interrupt */
-#define IRQ_AUTO_6	6	/* level 6 interrupt */
-#define IRQ_AUTO_7	7	/* level 7 interrupt (non-maskable) */
-
-#define IRQ_USER	8
-
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
-#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
-#define IRQ_FLG_FAST	(0x0004)
-#define IRQ_FLG_SLOW	(0x0008)
-#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
-#endif
-
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
-	irqreturn_t	(*handler)(int, void *);
-	void		*dev_id;
-	struct irq_node *next;
-	unsigned long	flags;
-	const char	*devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
-	int		(*handler)(int, void *);
-	unsigned long	flags;
-	void		*dev_id;
-	const char	*devname;
-};
-
-struct irq_controller {
-	const char *name;
-	spinlock_t lock;
-	int (*startup)(unsigned int irq);
-	void (*shutdown)(unsigned int irq);
-	void (*enable)(unsigned int irq);
-	void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
-
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
-
-#endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_no.h b/arch/m68k/include/asm/irq_no.h
deleted file mode 100644
index 9373c31ac87d..000000000000
--- a/arch/m68k/include/asm/irq_no.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define	SYS_IRQS	256
-#define	NR_IRQS		SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS	8
-#define NR_IRQS		(24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq)	(irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 7e3594dea88b..9c384e294af9 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -85,8 +85,21 @@
 #define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
 #endif
 
-#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x1c5)	/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x1c9)	/* Parallel Port Value (r/w) */
+
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+
+/*
+ * Generic GPIO
+ */
+#define MCFGPIO_PIN_MAX		8
+#define MCFGPIO_IRQ_VECBASE	-1
+#define MCFGPIO_IRQ_MAX		-1
 
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
@@ -111,21 +124,5 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
 #endif
 
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
-#endif
-
-/*
- *	Macro to get and set IMR register. It is 16 bits on the 5206.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
-
-#define	mcf_getipr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
-
 /****************************************************************************/
 #endif	/* m5206sim_h */
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 83bbcfd6e8f2..ed2b69b96805 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -11,9 +11,8 @@
 #define m520xsim_h
 /****************************************************************************/
 
-
 /*
- *  Define the 5282 SIM register set addresses.
+ *  Define the 520x SIM register set addresses.
  */
 #define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
 #define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
@@ -22,8 +21,22 @@
 #define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
 #define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
 #define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
+#define MCFINTC_SIMR        0x1c        /* Set interrupt mask 0-63 */
+#define MCFINTC_CIMR        0x1d        /* Clear interrupt mask 0-63 */
 #define MCFINTC_ICR0        0x40        /* Base ICR register */
 
+/*
+ *  The common interrupt controller code just wants to know the absolute
+ *  address to the SIMR and CIMR registers (not offsets into IPSBAR).
+ *  The 520x family only has a single INTC unit.
+ */
+#define MCFINTC0_SIMR       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR)
+#define MCFINTC0_CIMR       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR)
+#define	MCFINTC0_ICR0       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0)
+#define MCFINTC1_SIMR       (0)
+#define MCFINTC1_CIMR       (0)
+#define	MCFINTC1_ICR0       (0)
+
 #define MCFINT_VECBASE      64
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
@@ -41,6 +54,62 @@
 #define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
 #define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
 
+#define MCFEPORT_EPDDR			0xFC088002
+#define MCFEPORT_EPDR			0xFC088004
+#define MCFEPORT_EPPDR			0xFC088005
+
+#define MCFGPIO_PODR_BUSCTL		0xFC0A4000
+#define MCFGPIO_PODR_BE			0xFC0A4001
+#define MCFGPIO_PODR_CS			0xFC0A4002
+#define MCFGPIO_PODR_FECI2C		0xFC0A4003
+#define MCFGPIO_PODR_QSPI		0xFC0A4004
+#define MCFGPIO_PODR_TIMER		0xFC0A4005
+#define MCFGPIO_PODR_UART		0xFC0A4006
+#define MCFGPIO_PODR_FECH		0xFC0A4007
+#define MCFGPIO_PODR_FECL		0xFC0A4008
+
+#define MCFGPIO_PDDR_BUSCTL		0xFC0A400C
+#define MCFGPIO_PDDR_BE			0xFC0A400D
+#define MCFGPIO_PDDR_CS			0xFC0A400E
+#define MCFGPIO_PDDR_FECI2C		0xFC0A400F
+#define MCFGPIO_PDDR_QSPI		0xFC0A4010
+#define MCFGPIO_PDDR_TIMER		0xFC0A4011
+#define MCFGPIO_PDDR_UART		0xFC0A4012
+#define MCFGPIO_PDDR_FECH		0xFC0A4013
+#define MCFGPIO_PDDR_FECL		0xFC0A4014
+
+#define MCFGPIO_PPDSDR_BUSCTL		0xFC0A401A
+#define MCFGPIO_PPDSDR_BE		0xFC0A401B
+#define MCFGPIO_PPDSDR_CS		0xFC0A401C
+#define MCFGPIO_PPDSDR_FECI2C		0xFC0A401D
+#define MCFGPIO_PPDSDR_QSPI		0xFC0A401E
+#define MCFGPIO_PPDSDR_TIMER		0xFC0A401F
+#define MCFGPIO_PPDSDR_UART		0xFC0A4021
+#define MCFGPIO_PPDSDR_FECH		0xFC0A4021
+#define MCFGPIO_PPDSDR_FECL		0xFC0A4022
+
+#define MCFGPIO_PCLRR_BUSCTL		0xFC0A4024
+#define MCFGPIO_PCLRR_BE		0xFC0A4025
+#define MCFGPIO_PCLRR_CS		0xFC0A4026
+#define MCFGPIO_PCLRR_FECI2C		0xFC0A4027
+#define MCFGPIO_PCLRR_QSPI		0xFC0A4028
+#define MCFGPIO_PCLRR_TIMER		0xFC0A4029
+#define MCFGPIO_PCLRR_UART		0xFC0A402A
+#define MCFGPIO_PCLRR_FECH		0xFC0A402B
+#define MCFGPIO_PCLRR_FECL		0xFC0A402C
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_BUSCTL
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_BUSCTL
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_BUSCTL
+
+#define MCFGPIO_PIN_MAX			80
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+/****************************************************************************/
 
 #define MCF_GPIO_PAR_UART                   (0xA4036)
 #define MCF_GPIO_PAR_FECI2C                 (0xA4033)
@@ -55,10 +124,6 @@
 #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
 #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
 
-#define ICR_INTRCONF		0x05
-#define MCFPIT_IMR		MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
-
 /*
  *  Reset Controll Unit.
  */
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 55183b5df1b8..a34894cf8e6f 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -50,5 +50,82 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
+#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
+#define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
+#define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
+#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100003)
+#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x100006)
+#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x100007)
+#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100009)
+#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_TIMER	(MCF_IPSBAR + 0x10000B)
+#define MCFGPIO_PODR_ETPU	(MCF_IPSBAR + 0x10000C)
+
+#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PDDR_DATAH	(MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PDDR_DATAL	(MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100018)
+#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x100019)
+#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x10001A)
+#define MCFGPIO_PDDR_TIMER	(MCF_IPSBAR + 0x10001B)
+#define MCFGPIO_PDDR_ETPU	(MCF_IPSBAR + 0x10001C)
+
+#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PPDSDR_DATAH	(MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PPDSDR_DATAL	(MCF_IPSBAR + 0x100022)
+#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x100023)
+#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100025)
+#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PPDSDR_TIMER	(MCF_IPSBAR + 0x10002B)
+#define MCFGPIO_PPDSDR_ETPU	(MCF_IPSBAR + 0x10002C)
+
+#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PCLRR_DATAH	(MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PCLRR_DATAL	(MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100034)
+#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x100035)
+#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100036)
+#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100037)
+#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x100038)
+#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100039)
+#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x10003A)
+#define MCFGPIO_PCLRR_TIMER	(MCF_IPSBAR + 0x10003B)
+#define MCFGPIO_PCLRR_ETPU	(MCF_IPSBAR + 0x10003C)
+
+/*
+ * EPort
+ */
+
+#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
+#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
+
+#define MCFGPIO_PIN_MAX			107
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
 /****************************************************************************/
 #endif	/* m523xsim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 366eb8602d2f..14bce877ed88 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -71,16 +71,22 @@
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
 /*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+
+/*
  *	General purpose IO registers (in MBAR2).
  */
-#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
-#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
-#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
-#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
-#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
-#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
-#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
-#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
+#define	MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
+#define	MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
+#define	MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
+#define	MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
+#define	MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
+#define	MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
+#define	MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
+#define	MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
 
 #define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
 #define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
@@ -100,20 +106,28 @@
 #define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
 #define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
 
-
 /*
- *	Macro to set IMR register. It is 32 bits on the 5249.
+ * Define the base interrupt for the second interrupt controller.
+ * We set it to 128, out of the way of the base interrupts, and plenty
+ * of room for its 64 interrupts.
  */
-#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
+#define	MCFINTC2_VECBASE	128
 
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+#define	MCFINTC2_GPIOIRQ0	(MCFINTC2_VECBASE + 32)
+#define	MCFINTC2_GPIOIRQ1	(MCFINTC2_VECBASE + 33)
+#define	MCFINTC2_GPIOIRQ2	(MCFINTC2_VECBASE + 34)
+#define	MCFINTC2_GPIOIRQ3	(MCFINTC2_VECBASE + 35)
+#define	MCFINTC2_GPIOIRQ4	(MCFINTC2_VECBASE + 36)
+#define	MCFINTC2_GPIOIRQ5	(MCFINTC2_VECBASE + 37)
+#define	MCFINTC2_GPIOIRQ6	(MCFINTC2_VECBASE + 38)
+#define	MCFINTC2_GPIOIRQ7	(MCFINTC2_VECBASE + 39)
 
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX		64
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
 
 /****************************************************************************/
 
@@ -137,9 +151,9 @@
 	subql	#1,%a1				/* get MBAR2 address in a1 */
 
 	/*
-	 *      Move secondary interrupts to base at 128.
+	 *      Move secondary interrupts to their base (128).
 	 */
-	moveb	#0x80,%d0
+	moveb	#MCFINTC2_VECBASE,%d0
 	moveb	%d0,0x16b(%a1)			/* interrupt base register */
 
 	/*
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 6217edc21139..df3332c2317d 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -12,7 +12,6 @@
 #define	m5272sim_h
 /****************************************************************************/
 
-
 /*
  *	Define the 5272 SIM register set addresses.
  */
@@ -63,16 +62,59 @@
 #define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
 #define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
 
-#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
-#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
-#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
-#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
-#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
-#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
-#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
-#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
-#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
+#define	MCFSIM_PACNT		(MCF_MBAR + 0x80) /* Port A Control (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x84) /* Port A Direction (r/w) */
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x86) /* Port A Data (r/w) */
+#define	MCFSIM_PBCNT		(MCF_MBAR + 0x88) /* Port B Control (r/w) */
+#define	MCFSIM_PBDDR		(MCF_MBAR + 0x8c) /* Port B Direction (r/w) */
+#define	MCFSIM_PBDAT		(MCF_MBAR + 0x8e) /* Port B Data (r/w) */
+#define	MCFSIM_PCDDR		(MCF_MBAR + 0x94) /* Port C Direction (r/w) */
+#define	MCFSIM_PCDAT		(MCF_MBAR + 0x96) /* Port C Data (r/w) */
+#define	MCFSIM_PDCNT		(MCF_MBAR + 0x98) /* Port D Control (r/w) */
+
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCFINT_VECBASE		64		/* Base of interrupts */
+#define	MCF_IRQ_SPURIOUS	64		/* User Spurious */
+#define	MCF_IRQ_EINT1		65		/* External Interrupt 1 */
+#define	MCF_IRQ_EINT2		66		/* External Interrupt 2 */
+#define	MCF_IRQ_EINT3		67		/* External Interrupt 3 */
+#define	MCF_IRQ_EINT4		68		/* External Interrupt 4 */
+#define	MCF_IRQ_TIMER1		69		/* Timer 1 */
+#define	MCF_IRQ_TIMER2		70		/* Timer 2 */
+#define	MCF_IRQ_TIMER3		71		/* Timer 3 */
+#define	MCF_IRQ_TIMER4		72		/* Timer 4 */
+#define	MCF_IRQ_UART1		73		/* UART 1 */
+#define	MCF_IRQ_UART2		74		/* UART 2 */
+#define	MCF_IRQ_PLIP		75		/* PLIC 2Khz Periodic */
+#define	MCF_IRQ_PLIA		76		/* PLIC Asynchronous */
+#define	MCF_IRQ_USB0		77		/* USB Endpoint 0 */
+#define	MCF_IRQ_USB1		78		/* USB Endpoint 1 */
+#define	MCF_IRQ_USB2		79		/* USB Endpoint 2 */
+#define	MCF_IRQ_USB3		80		/* USB Endpoint 3 */
+#define	MCF_IRQ_USB4		81		/* USB Endpoint 4 */
+#define	MCF_IRQ_USB5		82		/* USB Endpoint 5 */
+#define	MCF_IRQ_USB6		83		/* USB Endpoint 6 */
+#define	MCF_IRQ_USB7		84		/* USB Endpoint 7 */
+#define	MCF_IRQ_DMA		85		/* DMA Controller */
+#define	MCF_IRQ_ERX		86		/* Ethernet Receiver */
+#define	MCF_IRQ_ETX		87		/* Ethernet Transmitter */
+#define	MCF_IRQ_ENTC		88		/* Ethernet Non-Time Critical */
+#define	MCF_IRQ_QSPI		89		/* Queued Serial Interface */
+#define	MCF_IRQ_EINT5		90		/* External Interrupt 5 */
+#define	MCF_IRQ_EINT6		91		/* External Interrupt 6 */
+#define	MCF_IRQ_SWTO		92		/* Software Watchdog */
+#define	MCFINT_VECMAX		95		/* Maxmum interrupt */
 
+#define	MCF_IRQ_TIMER		MCF_IRQ_TIMER1
+#define	MCF_IRQ_PROFILER	MCF_IRQ_TIMER2
 
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX			48
+#define MCFGPIO_IRQ_MAX			-1
+#define MCFGPIO_IRQ_VECBASE		-1
 /****************************************************************************/
 #endif	/* m5272sim_h */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 95f4f8ee8f7c..453356d72d80 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -54,6 +54,175 @@
 #define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
 #endif
 
+
+#ifdef CONFIG_M5271
+#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
+#define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
+#define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
+#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100003)
+#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x100006)
+#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x100007)
+#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100009)
+#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_TIMER	(MCF_IPSBAR + 0x10000B)
+
+#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PDDR_DATAH	(MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PDDR_DATAL	(MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100018)
+#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x100019)
+#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x10001A)
+#define MCFGPIO_PDDR_TIMER	(MCF_IPSBAR + 0x10001B)
+
+#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PPDSDR_DATAH	(MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PPDSDR_DATAL	(MCF_IPSBAR + 0x100022)
+#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x100023)
+#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100025)
+#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PPDSDR_TIMER	(MCF_IPSBAR + 0x10002B)
+
+#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PCLRR_DATAH	(MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PCLRR_DATAL	(MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100034)
+#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x100035)
+#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100036)
+#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100037)
+#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x100038)
+#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100039)
+#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x10003A)
+#define MCFGPIO_PCLRR_TIMER	(MCF_IPSBAR + 0x10003B)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
+
+#define MCFGPIO_PIN_MAX			100
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+#endif
+
+#ifdef CONFIG_M5275
+#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_FEC0H	(MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_FEC0L	(MCF_IPSBAR + 0x10000B)
+#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x10000C)
+#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000D)
+#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x10000E)
+#define MCFGPIO_PODR_TIMERH	(MCF_IPSBAR + 0x10000F)
+#define MCFGPIO_PODR_TIMERL	(MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PODR_FEC1H	(MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PODR_FEC1L	(MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PODR_IRQ	(MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PODR_USBH	(MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PODR_USBL	(MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100018)
+
+#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PDDR_FEC0H	(MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PDDR_FEC0L	(MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PDDR_TIMERH	(MCF_IPSBAR + 0x10002B)
+#define MCFGPIO_PDDR_TIMERL	(MCF_IPSBAR + 0x10002C)
+#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x10002D)
+#define MCFGPIO_PDDR_FEC1H	(MCF_IPSBAR + 0x10002E)
+#define MCFGPIO_PDDR_FEC1L	(MCF_IPSBAR + 0x10002F)
+#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PDDR_IRQ	(MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PDDR_USBH	(MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PDDR_USBL	(MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100034)
+
+#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x10003C)
+#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x10003D)
+#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100040)
+#define MCFGPIO_PPDSDR_FEC0H	(MCF_IPSBAR + 0x100042)
+#define MCFGPIO_PPDSDR_FEC0L	(MCF_IPSBAR + 0x100043)
+#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100044)
+#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x100045)
+#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100046)
+#define MCFGPIO_PPDSDR_TIMERH	(MCF_IPSBAR + 0x100047)
+#define MCFGPIO_PPDSDR_TIMERL	(MCF_IPSBAR + 0x100048)
+#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100049)
+#define MCFGPIO_PPDSDR_FEC1H	(MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PPDSDR_FEC1L	(MCF_IPSBAR + 0x10004B)
+#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x10004C)
+#define MCFGPIO_PPDSDR_IRQ	(MCF_IPSBAR + 0x10004D)
+#define MCFGPIO_PPDSDR_USBH	(MCF_IPSBAR + 0x10004E)
+#define MCFGPIO_PPDSDR_USBL	(MCF_IPSBAR + 0x10004F)
+#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100050)
+
+#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100058)
+#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100059)
+#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x10005C)
+#define MCFGPIO_PCLRR_FEC0H	(MCF_IPSBAR + 0x10005E)
+#define MCFGPIO_PCLRR_FEC0L	(MCF_IPSBAR + 0x10005F)
+#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100060)
+#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x100061)
+#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100062)
+#define MCFGPIO_PCLRR_TIMERH	(MCF_IPSBAR + 0x100063)
+#define MCFGPIO_PCLRR_TIMERL	(MCF_IPSBAR + 0x100064)
+#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100065)
+#define MCFGPIO_PCLRR_FEC1H	(MCF_IPSBAR + 0x100066)
+#define MCFGPIO_PCLRR_FEC1L	(MCF_IPSBAR + 0x100067)
+#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100068)
+#define MCFGPIO_PCLRR_IRQ	(MCF_IPSBAR + 0x100069)
+#define MCFGPIO_PCLRR_USBH	(MCF_IPSBAR + 0x10006A)
+#define MCFGPIO_PCLRR_USBL	(MCF_IPSBAR + 0x10006B)
+#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x10006C)
+
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_BUSCTL
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_BUSCTL
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_BUSCTL
+
+#define MCFGPIO_PIN_MAX			148
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+#endif
+
+/*
+ * EPort
+ */
+
+#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
+#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
+
+
 /*
  *	GPIO pins setups to enable the UARTs.
  */
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index d79c49f8134a..e2ad1f42b657 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -41,6 +41,157 @@
 #define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
 
 /*
+ * 	GPIO registers
+ */
+#define MCFGPIO_PORTA		(MCF_IPSBAR + 0x00100000)
+#define MCFGPIO_PORTB		(MCF_IPSBAR + 0x00100001)
+#define MCFGPIO_PORTC		(MCF_IPSBAR + 0x00100002)
+#define MCFGPIO_PORTD		(MCF_IPSBAR + 0x00100003)
+#define MCFGPIO_PORTE		(MCF_IPSBAR + 0x00100004)
+#define MCFGPIO_PORTF		(MCF_IPSBAR + 0x00100005)
+#define MCFGPIO_PORTG		(MCF_IPSBAR + 0x00100006)
+#define MCFGPIO_PORTH		(MCF_IPSBAR + 0x00100007)
+#define MCFGPIO_PORTJ		(MCF_IPSBAR + 0x00100008)
+#define MCFGPIO_PORTDD		(MCF_IPSBAR + 0x00100009)
+#define MCFGPIO_PORTEH		(MCF_IPSBAR + 0x0010000A)
+#define MCFGPIO_PORTEL		(MCF_IPSBAR + 0x0010000B)
+#define MCFGPIO_PORTAS		(MCF_IPSBAR + 0x0010000C)
+#define MCFGPIO_PORTQS		(MCF_IPSBAR + 0x0010000D)
+#define MCFGPIO_PORTSD		(MCF_IPSBAR + 0x0010000E)
+#define MCFGPIO_PORTTC		(MCF_IPSBAR + 0x0010000F)
+#define MCFGPIO_PORTTD		(MCF_IPSBAR + 0x00100010)
+#define MCFGPIO_PORTUA		(MCF_IPSBAR + 0x00100011)
+
+#define MCFGPIO_DDRA		(MCF_IPSBAR + 0x00100014)
+#define MCFGPIO_DDRB		(MCF_IPSBAR + 0x00100015)
+#define MCFGPIO_DDRC		(MCF_IPSBAR + 0x00100016)
+#define MCFGPIO_DDRD		(MCF_IPSBAR + 0x00100017)
+#define MCFGPIO_DDRE		(MCF_IPSBAR + 0x00100018)
+#define MCFGPIO_DDRF		(MCF_IPSBAR + 0x00100019)
+#define MCFGPIO_DDRG		(MCF_IPSBAR + 0x0010001A)
+#define MCFGPIO_DDRH		(MCF_IPSBAR + 0x0010001B)
+#define MCFGPIO_DDRJ		(MCF_IPSBAR + 0x0010001C)
+#define MCFGPIO_DDRDD		(MCF_IPSBAR + 0x0010001D)
+#define MCFGPIO_DDREH		(MCF_IPSBAR + 0x0010001E)
+#define MCFGPIO_DDREL		(MCF_IPSBAR + 0x0010001F)
+#define MCFGPIO_DDRAS		(MCF_IPSBAR + 0x00100020)
+#define MCFGPIO_DDRQS		(MCF_IPSBAR + 0x00100021)
+#define MCFGPIO_DDRSD		(MCF_IPSBAR + 0x00100022)
+#define MCFGPIO_DDRTC		(MCF_IPSBAR + 0x00100023)
+#define MCFGPIO_DDRTD		(MCF_IPSBAR + 0x00100024)
+#define MCFGPIO_DDRUA		(MCF_IPSBAR + 0x00100025)
+
+#define MCFGPIO_PORTAP		(MCF_IPSBAR + 0x00100028)
+#define MCFGPIO_PORTBP		(MCF_IPSBAR + 0x00100029)
+#define MCFGPIO_PORTCP		(MCF_IPSBAR + 0x0010002A)
+#define MCFGPIO_PORTDP		(MCF_IPSBAR + 0x0010002B)
+#define MCFGPIO_PORTEP		(MCF_IPSBAR + 0x0010002C)
+#define MCFGPIO_PORTFP		(MCF_IPSBAR + 0x0010002D)
+#define MCFGPIO_PORTGP		(MCF_IPSBAR + 0x0010002E)
+#define MCFGPIO_PORTHP		(MCF_IPSBAR + 0x0010002F)
+#define MCFGPIO_PORTJP		(MCF_IPSBAR + 0x00100030)
+#define MCFGPIO_PORTDDP		(MCF_IPSBAR + 0x00100031)
+#define MCFGPIO_PORTEHP		(MCF_IPSBAR + 0x00100032)
+#define MCFGPIO_PORTELP		(MCF_IPSBAR + 0x00100033)
+#define MCFGPIO_PORTASP		(MCF_IPSBAR + 0x00100034)
+#define MCFGPIO_PORTQSP		(MCF_IPSBAR + 0x00100035)
+#define MCFGPIO_PORTSDP		(MCF_IPSBAR + 0x00100036)
+#define MCFGPIO_PORTTCP		(MCF_IPSBAR + 0x00100037)
+#define MCFGPIO_PORTTDP		(MCF_IPSBAR + 0x00100038)
+#define MCFGPIO_PORTUAP		(MCF_IPSBAR + 0x00100039)
+
+#define MCFGPIO_SETA		(MCF_IPSBAR + 0x00100028)
+#define MCFGPIO_SETB		(MCF_IPSBAR + 0x00100029)
+#define MCFGPIO_SETC		(MCF_IPSBAR + 0x0010002A)
+#define MCFGPIO_SETD		(MCF_IPSBAR + 0x0010002B)
+#define MCFGPIO_SETE		(MCF_IPSBAR + 0x0010002C)
+#define MCFGPIO_SETF		(MCF_IPSBAR + 0x0010002D)
+#define MCFGPIO_SETG		(MCF_IPSBAR + 0x0010002E)
+#define MCFGPIO_SETH		(MCF_IPSBAR + 0x0010002F)
+#define MCFGPIO_SETJ		(MCF_IPSBAR + 0x00100030)
+#define MCFGPIO_SETDD		(MCF_IPSBAR + 0x00100031)
+#define MCFGPIO_SETEH		(MCF_IPSBAR + 0x00100032)
+#define MCFGPIO_SETEL		(MCF_IPSBAR + 0x00100033)
+#define MCFGPIO_SETAS		(MCF_IPSBAR + 0x00100034)
+#define MCFGPIO_SETQS		(MCF_IPSBAR + 0x00100035)
+#define MCFGPIO_SETSD		(MCF_IPSBAR + 0x00100036)
+#define MCFGPIO_SETTC		(MCF_IPSBAR + 0x00100037)
+#define MCFGPIO_SETTD		(MCF_IPSBAR + 0x00100038)
+#define MCFGPIO_SETUA		(MCF_IPSBAR + 0x00100039)
+
+#define MCFGPIO_CLRA		(MCF_IPSBAR + 0x0010003C)
+#define MCFGPIO_CLRB		(MCF_IPSBAR + 0x0010003D)
+#define MCFGPIO_CLRC		(MCF_IPSBAR + 0x0010003E)
+#define MCFGPIO_CLRD		(MCF_IPSBAR + 0x0010003F)
+#define MCFGPIO_CLRE		(MCF_IPSBAR + 0x00100040)
+#define MCFGPIO_CLRF		(MCF_IPSBAR + 0x00100041)
+#define MCFGPIO_CLRG		(MCF_IPSBAR + 0x00100042)
+#define MCFGPIO_CLRH		(MCF_IPSBAR + 0x00100043)
+#define MCFGPIO_CLRJ		(MCF_IPSBAR + 0x00100044)
+#define MCFGPIO_CLRDD		(MCF_IPSBAR + 0x00100045)
+#define MCFGPIO_CLREH		(MCF_IPSBAR + 0x00100046)
+#define MCFGPIO_CLREL		(MCF_IPSBAR + 0x00100047)
+#define MCFGPIO_CLRAS		(MCF_IPSBAR + 0x00100048)
+#define MCFGPIO_CLRQS		(MCF_IPSBAR + 0x00100049)
+#define MCFGPIO_CLRSD		(MCF_IPSBAR + 0x0010004A)
+#define MCFGPIO_CLRTC		(MCF_IPSBAR + 0x0010004B)
+#define MCFGPIO_CLRTD		(MCF_IPSBAR + 0x0010004C)
+#define MCFGPIO_CLRUA		(MCF_IPSBAR + 0x0010004D)
+
+#define MCFGPIO_PBCDPAR		(MCF_IPSBAR + 0x00100050)
+#define MCFGPIO_PFPAR		(MCF_IPSBAR + 0x00100051)
+#define MCFGPIO_PEPAR		(MCF_IPSBAR + 0x00100052)
+#define MCFGPIO_PJPAR		(MCF_IPSBAR + 0x00100054)
+#define MCFGPIO_PSDPAR		(MCF_IPSBAR + 0x00100055)
+#define MCFGPIO_PASPAR		(MCF_IPSBAR + 0x00100056)
+#define MCFGPIO_PEHLPAR		(MCF_IPSBAR + 0x00100058)
+#define MCFGPIO_PQSPAR		(MCF_IPSBAR + 0x00100059)
+#define MCFGPIO_PTCPAR		(MCF_IPSBAR + 0x0010005A)
+#define MCFGPIO_PTDPAR		(MCF_IPSBAR + 0x0010005B)
+#define MCFGPIO_PUAPAR		(MCF_IPSBAR + 0x0010005C)
+
+/*
+ * 	Edge Port registers
+ */
+#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x00130000)
+#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x00130002)
+#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x00130003)
+#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x00130004)
+#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x00130005)
+#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x00130006)
+
+/*
+ * 	Queued ADC registers
+ */
+#define MCFQADC_PORTQA		(MCF_IPSBAR + 0x00190006)
+#define MCFQADC_PORTQB		(MCF_IPSBAR + 0x00190007)
+#define MCFQADC_DDRQA		(MCF_IPSBAR + 0x00190008)
+#define MCFQADC_DDRQB		(MCF_IPSBAR + 0x00190009)
+
+/*
+ * 	General Purpose Timers registers
+ */
+#define MCFGPTA_GPTPORT		(MCF_IPSBAR + 0x001A001D)
+#define MCFGPTA_GPTDDR		(MCF_IPSBAR + 0x001A001E)
+#define MCFGPTB_GPTPORT		(MCF_IPSBAR + 0x001B001D)
+#define MCFGPTB_GPTDDR		(MCF_IPSBAR + 0x001B001E)
+/*
+ *
+ * definitions for generic gpio support
+ *
+ */
+#define MCFGPIO_PODR		MCFGPIO_PORTA	/* port output data */
+#define MCFGPIO_PDDR		MCFGPIO_DDRA	/* port data direction */
+#define MCFGPIO_PPDR		MCFGPIO_PORTAP	/* port pin data */
+#define MCFGPIO_SETR		MCFGPIO_SETA	/* set output */
+#define MCFGPIO_CLRR		MCFGPIO_CLRA	/* clr output */
+
+#define MCFGPIO_IRQ_MAX		8
+#define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
+#define MCFGPIO_PIN_MAX		180
+
+
+/*
  *	Derek Cheung - 6 Feb 2005
  *		add I2C and QSPI register definition using Freescale's MCF5282
  */
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 5886728409c0..c6830e5b54ce 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -90,8 +90,15 @@
 #define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
 
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX			16
+#define MCFGPIO_IRQ_MAX			-1
+#define MCFGPIO_IRQ_VECBASE		-1
 
 
 /* Definition offset address for CS2-7  -- old mask 5307 */
@@ -117,22 +124,6 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
-#if defined(CONFIG_M5307)
-#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
-#endif
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
 
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
@@ -149,6 +140,11 @@
 #define IRQ3_LEVEL6	0x40
 #define IRQ1_LEVEL2	0x20
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
 /*
  *	Define the Cache register flags.
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index eb7fd4448947..36bf15aec9ae 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -56,47 +56,21 @@
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
 
-#define	MCFSIM_IMR_MASKALL	0xFFFFFFFF	/* All SIM intr sources */
-
-#define MCFSIM_IMR_SIMR0	0xFC04801C
-#define MCFSIM_IMR_SIMR1	0xFC04C01C
-#define MCFSIM_IMR_CIMR0	0xFC04801D
-#define MCFSIM_IMR_CIMR1	0xFC04C01D
+#define	MCFINTC0_SIMR		0xFC04801C
+#define	MCFINTC0_CIMR		0xFC04801D
+#define	MCFINTC0_ICR0		0xFC048040
+#define	MCFINTC1_SIMR		0xFC04C01C
+#define	MCFINTC1_CIMR		0xFC04C01D
+#define	MCFINTC1_ICR0		0xFC04C040
 
 #define MCFSIM_ICR_TIMER1	(0xFC048040+32)
 #define MCFSIM_ICR_TIMER2	(0xFC048040+33)
 
-
 /*
- *	Macro to set IMR register. It is 32 bits on the 5307.
+ *	Define system peripheral IRQ usage.
  */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-#define	mcf_getiprl()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
-
-#define	mcf_getiprh()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
-
-
-#define mcf_enable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
-
-#define mcf_enable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
-
-#define mcf_disable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
-
-#define mcf_disable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+#define	MCF_IRQ_TIMER		(64 + 32)	/* Timer0 */
+#define	MCF_IRQ_PROFILER	(64 + 33)	/* Timer1 */
 
 /*
  *	Define the Cache register flags.
@@ -422,70 +396,70 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_GPIO_PODR_FECH		MCF_REG08(0xFC0A4000)
-#define MCF_GPIO_PODR_FECL		MCF_REG08(0xFC0A4001)
-#define MCF_GPIO_PODR_SSI		MCF_REG08(0xFC0A4002)
-#define MCF_GPIO_PODR_BUSCTL		MCF_REG08(0xFC0A4003)
-#define MCF_GPIO_PODR_BE		MCF_REG08(0xFC0A4004)
-#define MCF_GPIO_PODR_CS		MCF_REG08(0xFC0A4005)
-#define MCF_GPIO_PODR_PWM		MCF_REG08(0xFC0A4006)
-#define MCF_GPIO_PODR_FECI2C		MCF_REG08(0xFC0A4007)
-#define MCF_GPIO_PODR_UART		MCF_REG08(0xFC0A4009)
-#define MCF_GPIO_PODR_QSPI		MCF_REG08(0xFC0A400A)
-#define MCF_GPIO_PODR_TIMER		MCF_REG08(0xFC0A400B)
-#define MCF_GPIO_PODR_LCDDATAH		MCF_REG08(0xFC0A400D)
-#define MCF_GPIO_PODR_LCDDATAM		MCF_REG08(0xFC0A400E)
-#define MCF_GPIO_PODR_LCDDATAL		MCF_REG08(0xFC0A400F)
-#define MCF_GPIO_PODR_LCDCTLH		MCF_REG08(0xFC0A4010)
-#define MCF_GPIO_PODR_LCDCTLL		MCF_REG08(0xFC0A4011)
-#define MCF_GPIO_PDDR_FECH		MCF_REG08(0xFC0A4014)
-#define MCF_GPIO_PDDR_FECL		MCF_REG08(0xFC0A4015)
-#define MCF_GPIO_PDDR_SSI		MCF_REG08(0xFC0A4016)
-#define MCF_GPIO_PDDR_BUSCTL		MCF_REG08(0xFC0A4017)
-#define MCF_GPIO_PDDR_BE		MCF_REG08(0xFC0A4018)
-#define MCF_GPIO_PDDR_CS		MCF_REG08(0xFC0A4019)
-#define MCF_GPIO_PDDR_PWM		MCF_REG08(0xFC0A401A)
-#define MCF_GPIO_PDDR_FECI2C		MCF_REG08(0xFC0A401B)
-#define MCF_GPIO_PDDR_UART		MCF_REG08(0xFC0A401C)
-#define MCF_GPIO_PDDR_QSPI		MCF_REG08(0xFC0A401E)
-#define MCF_GPIO_PDDR_TIMER		MCF_REG08(0xFC0A401F)
-#define MCF_GPIO_PDDR_LCDDATAH		MCF_REG08(0xFC0A4021)
-#define MCF_GPIO_PDDR_LCDDATAM		MCF_REG08(0xFC0A4022)
-#define MCF_GPIO_PDDR_LCDDATAL		MCF_REG08(0xFC0A4023)
-#define MCF_GPIO_PDDR_LCDCTLH		MCF_REG08(0xFC0A4024)
-#define MCF_GPIO_PDDR_LCDCTLL		MCF_REG08(0xFC0A4025)
-#define MCF_GPIO_PPDSDR_FECH		MCF_REG08(0xFC0A4028)
-#define MCF_GPIO_PPDSDR_FECL		MCF_REG08(0xFC0A4029)
-#define MCF_GPIO_PPDSDR_SSI		MCF_REG08(0xFC0A402A)
-#define MCF_GPIO_PPDSDR_BUSCTL		MCF_REG08(0xFC0A402B)
-#define MCF_GPIO_PPDSDR_BE		MCF_REG08(0xFC0A402C)
-#define MCF_GPIO_PPDSDR_CS		MCF_REG08(0xFC0A402D)
-#define MCF_GPIO_PPDSDR_PWM		MCF_REG08(0xFC0A402E)
-#define MCF_GPIO_PPDSDR_FECI2C		MCF_REG08(0xFC0A402F)
-#define MCF_GPIO_PPDSDR_UART		MCF_REG08(0xFC0A4031)
-#define MCF_GPIO_PPDSDR_QSPI		MCF_REG08(0xFC0A4032)
-#define MCF_GPIO_PPDSDR_TIMER		MCF_REG08(0xFC0A4033)
-#define MCF_GPIO_PPDSDR_LCDDATAH	MCF_REG08(0xFC0A4035)
-#define MCF_GPIO_PPDSDR_LCDDATAM	MCF_REG08(0xFC0A4036)
-#define MCF_GPIO_PPDSDR_LCDDATAL	MCF_REG08(0xFC0A4037)
-#define MCF_GPIO_PPDSDR_LCDCTLH		MCF_REG08(0xFC0A4038)
-#define MCF_GPIO_PPDSDR_LCDCTLL		MCF_REG08(0xFC0A4039)
-#define MCF_GPIO_PCLRR_FECH		MCF_REG08(0xFC0A403C)
-#define MCF_GPIO_PCLRR_FECL		MCF_REG08(0xFC0A403D)
-#define MCF_GPIO_PCLRR_SSI		MCF_REG08(0xFC0A403E)
-#define MCF_GPIO_PCLRR_BUSCTL		MCF_REG08(0xFC0A403F)
-#define MCF_GPIO_PCLRR_BE		MCF_REG08(0xFC0A4040)
-#define MCF_GPIO_PCLRR_CS		MCF_REG08(0xFC0A4041)
-#define MCF_GPIO_PCLRR_PWM		MCF_REG08(0xFC0A4042)
-#define MCF_GPIO_PCLRR_FECI2C		MCF_REG08(0xFC0A4043)
-#define MCF_GPIO_PCLRR_UART		MCF_REG08(0xFC0A4045)
-#define MCF_GPIO_PCLRR_QSPI		MCF_REG08(0xFC0A4046)
-#define MCF_GPIO_PCLRR_TIMER		MCF_REG08(0xFC0A4047)
-#define MCF_GPIO_PCLRR_LCDDATAH		MCF_REG08(0xFC0A4049)
-#define MCF_GPIO_PCLRR_LCDDATAM		MCF_REG08(0xFC0A404A)
-#define MCF_GPIO_PCLRR_LCDDATAL		MCF_REG08(0xFC0A404B)
-#define MCF_GPIO_PCLRR_LCDCTLH		MCF_REG08(0xFC0A404C)
-#define MCF_GPIO_PCLRR_LCDCTLL		MCF_REG08(0xFC0A404D)
+#define MCFGPIO_PODR_FECH		(0xFC0A4000)
+#define MCFGPIO_PODR_FECL		(0xFC0A4001)
+#define MCFGPIO_PODR_SSI		(0xFC0A4002)
+#define MCFGPIO_PODR_BUSCTL		(0xFC0A4003)
+#define MCFGPIO_PODR_BE			(0xFC0A4004)
+#define MCFGPIO_PODR_CS			(0xFC0A4005)
+#define MCFGPIO_PODR_PWM		(0xFC0A4006)
+#define MCFGPIO_PODR_FECI2C		(0xFC0A4007)
+#define MCFGPIO_PODR_UART		(0xFC0A4009)
+#define MCFGPIO_PODR_QSPI		(0xFC0A400A)
+#define MCFGPIO_PODR_TIMER		(0xFC0A400B)
+#define MCFGPIO_PODR_LCDDATAH		(0xFC0A400D)
+#define MCFGPIO_PODR_LCDDATAM		(0xFC0A400E)
+#define MCFGPIO_PODR_LCDDATAL		(0xFC0A400F)
+#define MCFGPIO_PODR_LCDCTLH		(0xFC0A4010)
+#define MCFGPIO_PODR_LCDCTLL		(0xFC0A4011)
+#define MCFGPIO_PDDR_FECH		(0xFC0A4014)
+#define MCFGPIO_PDDR_FECL		(0xFC0A4015)
+#define MCFGPIO_PDDR_SSI		(0xFC0A4016)
+#define MCFGPIO_PDDR_BUSCTL		(0xFC0A4017)
+#define MCFGPIO_PDDR_BE			(0xFC0A4018)
+#define MCFGPIO_PDDR_CS			(0xFC0A4019)
+#define MCFGPIO_PDDR_PWM		(0xFC0A401A)
+#define MCFGPIO_PDDR_FECI2C		(0xFC0A401B)
+#define MCFGPIO_PDDR_UART		(0xFC0A401C)
+#define MCFGPIO_PDDR_QSPI		(0xFC0A401E)
+#define MCFGPIO_PDDR_TIMER		(0xFC0A401F)
+#define MCFGPIO_PDDR_LCDDATAH		(0xFC0A4021)
+#define MCFGPIO_PDDR_LCDDATAM		(0xFC0A4022)
+#define MCFGPIO_PDDR_LCDDATAL		(0xFC0A4023)
+#define MCFGPIO_PDDR_LCDCTLH		(0xFC0A4024)
+#define MCFGPIO_PDDR_LCDCTLL		(0xFC0A4025)
+#define MCFGPIO_PPDSDR_FECH		(0xFC0A4028)
+#define MCFGPIO_PPDSDR_FECL		(0xFC0A4029)
+#define MCFGPIO_PPDSDR_SSI		(0xFC0A402A)
+#define MCFGPIO_PPDSDR_BUSCTL		(0xFC0A402B)
+#define MCFGPIO_PPDSDR_BE		(0xFC0A402C)
+#define MCFGPIO_PPDSDR_CS		(0xFC0A402D)
+#define MCFGPIO_PPDSDR_PWM		(0xFC0A402E)
+#define MCFGPIO_PPDSDR_FECI2C		(0xFC0A402F)
+#define MCFGPIO_PPDSDR_UART		(0xFC0A4031)
+#define MCFGPIO_PPDSDR_QSPI		(0xFC0A4032)
+#define MCFGPIO_PPDSDR_TIMER		(0xFC0A4033)
+#define MCFGPIO_PPDSDR_LCDDATAH		(0xFC0A4035)
+#define MCFGPIO_PPDSDR_LCDDATAM		(0xFC0A4036)
+#define MCFGPIO_PPDSDR_LCDDATAL		(0xFC0A4037)
+#define MCFGPIO_PPDSDR_LCDCTLH		(0xFC0A4038)
+#define MCFGPIO_PPDSDR_LCDCTLL		(0xFC0A4039)
+#define MCFGPIO_PCLRR_FECH		(0xFC0A403C)
+#define MCFGPIO_PCLRR_FECL		(0xFC0A403D)
+#define MCFGPIO_PCLRR_SSI		(0xFC0A403E)
+#define MCFGPIO_PCLRR_BUSCTL		(0xFC0A403F)
+#define MCFGPIO_PCLRR_BE		(0xFC0A4040)
+#define MCFGPIO_PCLRR_CS		(0xFC0A4041)
+#define MCFGPIO_PCLRR_PWM		(0xFC0A4042)
+#define MCFGPIO_PCLRR_FECI2C		(0xFC0A4043)
+#define MCFGPIO_PCLRR_UART		(0xFC0A4045)
+#define MCFGPIO_PCLRR_QSPI		(0xFC0A4046)
+#define MCFGPIO_PCLRR_TIMER		(0xFC0A4047)
+#define MCFGPIO_PCLRR_LCDDATAH		(0xFC0A4049)
+#define MCFGPIO_PCLRR_LCDDATAM		(0xFC0A404A)
+#define MCFGPIO_PCLRR_LCDDATAL		(0xFC0A404B)
+#define MCFGPIO_PCLRR_LCDCTLH		(0xFC0A404C)
+#define MCFGPIO_PCLRR_LCDCTLL		(0xFC0A404D)
 #define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
 #define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
 #define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
@@ -1187,6 +1161,20 @@
 /* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
 #define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
 
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_FECH
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_FECH
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_FECH
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_FECH
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_FECH
+
+#define MCFGPIO_PIN_MAX			136
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
+
 /*********************************************************************
  *
  * Interrupt Controller (INTC)
@@ -2154,12 +2142,12 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_EPORT_EPPAR                MCF_REG16(0xFC094000)
-#define MCF_EPORT_EPDDR                MCF_REG08(0xFC094002)
-#define MCF_EPORT_EPIER                MCF_REG08(0xFC094003)
-#define MCF_EPORT_EPDR                 MCF_REG08(0xFC094004)
-#define MCF_EPORT_EPPDR                MCF_REG08(0xFC094005)
-#define MCF_EPORT_EPFR                 MCF_REG08(0xFC094006)
+#define MCFEPORT_EPPAR                (0xFC094000)
+#define MCFEPORT_EPDDR                (0xFC094002)
+#define MCFEPORT_EPIER                (0xFC094003)
+#define MCFEPORT_EPDR                 (0xFC094004)
+#define MCFEPORT_EPPDR                (0xFC094005)
+#define MCFEPORT_EPFR                 (0xFC094006)
 
 /* Bit definitions and macros for MCF_EPORT_EPPAR */
 #define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index cc22c4a53005..c399abbf953c 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -73,9 +73,15 @@
 #define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
 
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
 
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX			16
+#define MCFGPIO_IRQ_MAX			-1
+#define MCFGPIO_IRQ_VECBASE		-1
 
 /*
  *	Some symbol defines for the above...
@@ -91,19 +97,6 @@
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
 /*
- *	Macro to set IMR register. It is 32 bits on the 5407.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
  */
 #define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
@@ -118,6 +111,11 @@
 #define IRQ3_LEVEL6	0x40
 #define IRQ1_LEVEL2	0x20
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
 /*
  *	Define the Cache register flags.
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h
new file mode 100644
index 000000000000..ee5e4ccce89e
--- /dev/null
+++ b/arch/m68k/include/asm/mcfgpio.h
@@ -0,0 +1,40 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef mcfgpio_h
+#define mcfgpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+
+struct mcf_gpio_chip {
+	struct gpio_chip gpio_chip;
+	void __iomem *pddr;
+	void __iomem *podr;
+	void __iomem *ppdr;
+	void __iomem *setr;
+	void __iomem *clrr;
+	const u8 *gpio_to_pinmux;
+};
+
+int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
+int mcf_gpio_get_value(struct gpio_chip *, unsigned);
+int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
+int mcf_gpio_request(struct gpio_chip *, unsigned);
+void mcf_gpio_free(struct gpio_chip *, unsigned);
+
+#endif
diff --git a/arch/m68k/include/asm/mcfintc.h b/arch/m68k/include/asm/mcfintc.h
new file mode 100644
index 000000000000..4183320a3813
--- /dev/null
+++ b/arch/m68k/include/asm/mcfintc.h
@@ -0,0 +1,89 @@
+/****************************************************************************/
+
+/*
+ *	mcfintc.h -- support definitions for the simple ColdFire
+ *		     Interrupt Controller
+ *
+ * 	(C) Copyright 2009,  Greg Ungerer <gerg@uclinux.org>
+ */
+
+/****************************************************************************/
+#ifndef	mcfintc_h
+#define	mcfintc_h
+/****************************************************************************/
+
+/*
+ * Most of the older ColdFire parts use the same simple interrupt
+ * controller. This is currently used on the 5206, 5206e, 5249, 5307
+ * and 5407 parts.
+ *
+ * The builtin peripherals are masked through dedicated bits in the
+ * Interrupt Mask register (IMR) - and this is not indexed (or in any way
+ * related to) the actual interrupt number they use. So knowing the IRQ
+ * number doesn't explicitly map to a certain internal device for
+ * interrupt control purposes.
+ */
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+
+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
+
+/*
+ * IMR bit position definitions. Not all ColdFire parts with this interrupt
+ * controller actually support all of these interrupt sources. But the bit
+ * numbers are the same in all cores.
+ */
+#define	MCFINTC_EINT1		1		/* External int #1 */
+#define	MCFINTC_EINT2		2		/* External int #2 */
+#define	MCFINTC_EINT3		3		/* External int #3 */
+#define	MCFINTC_EINT4		4		/* External int #4 */
+#define	MCFINTC_EINT5		5		/* External int #5 */
+#define	MCFINTC_EINT6		6		/* External int #6 */
+#define	MCFINTC_EINT7		7		/* External int #7 */
+#define	MCFINTC_SWT		8		/* Software Watchdog */
+#define	MCFINTC_TIMER1		9
+#define	MCFINTC_TIMER2		10
+#define	MCFINTC_I2C		11		/* I2C / MBUS */
+#define	MCFINTC_UART0		12
+#define	MCFINTC_UART1		13
+#define	MCFINTC_DMA0		14
+#define	MCFINTC_DMA1		15
+#define	MCFINTC_DMA2		16
+#define	MCFINTC_DMA3		17
+#define	MCFINTC_QSPI		18
+
+#ifndef __ASSEMBLER__
+
+/*
+ * There is no one-is-one correspondance between the interrupt number (irq)
+ * and the bit fields on the mask register. So we create a per-cpu type
+ * mapping of irq to mask bit. The CPU platform code needs to register
+ * its supported irq's at init time, using this function.
+ */
+extern unsigned char mcf_irq2imr[];
+static inline void mcf_mapirq2imr(int irq, int imr)
+{
+	mcf_irq2imr[irq] = imr;
+}
+
+void mcf_autovector(int irq);
+void mcf_setimr(int index);
+void mcf_clrimr(int index);
+#endif
+
+/****************************************************************************/
+#endif	/* mcfintc_h */
diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
index 431f63aadd0e..bf638be0958c 100644
--- a/arch/m68k/include/asm/mcfne.h
+++ b/arch/m68k/include/asm/mcfne.h
@@ -239,87 +239,4 @@ void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
 #endif /* NE2000_OFFOFFSET */
 
 /****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- *	Lastly the interrupt set up code...
- *	Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned long	*icrp;
-	volatile unsigned long	*pitr;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77077777) | 0x00d00000;
-
-	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
-	*pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
-	volatile unsigned long	*icrp;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-	mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
-/****************************************************************************/
 #endif	/* mcfne_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index da3f2ceff3a4..9c70a67bf85f 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -4,7 +4,7 @@
  *	mcfsim.h -- ColdFire System Integration Module support.
  *
  *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
  */
 
 /****************************************************************************/
@@ -12,19 +12,21 @@
 #define	mcfsim_h
 /****************************************************************************/
 
-
 /*
- *	Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
- *	5307 or 5407 specific addresses.
+ * Include the appropriate ColdFire CPU specific System Integration Module
+ * (SIM) definitions.
  */
 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
 #include <asm/m5206sim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M520x)
 #include <asm/m520xsim.h>
 #elif defined(CONFIG_M523x)
 #include <asm/m523xsim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M5249)
 #include <asm/m5249sim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M527x)
 #include <asm/m527xsim.h>
 #elif defined(CONFIG_M5272)
@@ -33,94 +35,13 @@
 #include <asm/m528xsim.h>
 #elif defined(CONFIG_M5307)
 #include <asm/m5307sim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M532x)
 #include <asm/m532xsim.h>
 #elif defined(CONFIG_M5407)
 #include <asm/m5407sim.h>
+#include <asm/mcfintc.h>
 #endif
 
-
-/*
- *	Define the base address of the SIM within the MBAR address space.
- */
-#define	MCFSIM_BASE		0x0		/* Base address of SIM */
-
-
-/*
- *	Bit definitions for the ICR family of registers.
- */
-#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
-#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
-#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
-#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
-#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
-#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
-#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
-#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
-#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
-
-#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
-#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
-#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
-#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
-
-/*
- *	Bit definitions for the Interrupt Mask register (IMR).
- */
-#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
-#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
-#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
-#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
-#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
-#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
-#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
-
-#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
-#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
-#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
-#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
-#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
-#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
-#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
-#endif
-
-/*
- *	Mask for all of the SIM devices. Some parts have more or less
- *	SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
-#endif
-
-
-/*
- *	PIT interrupt settings, if not found in mXXXXsim.h file.
- */
-#ifndef	ICR_INTRCONF
-#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
-#endif
-#ifndef	MCFPIT_IMR
-#define	MCFPIT_IMR		MCFINTC_IMRH
-#endif
-#ifndef	MCFPIT_IMR_IBIT
-#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
-#endif
-
-
-#ifndef __ASSEMBLY__
-/*
- *	Definition for the interrupt auto-vectoring support.
- */
-extern void	mcf_autovector(unsigned int vec);
-#endif /* __ASSEMBLY__ */
-
 /****************************************************************************/
 #endif	/* mcfsim_h */
diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
index 2d7a4dbd9683..527bea5d6788 100644
--- a/arch/m68k/include/asm/mcfsmc.h
+++ b/arch/m68k/include/asm/mcfsmc.h
@@ -167,15 +167,15 @@ void smc_remap(unsigned int ioaddr)
 	static int		once = 0;
 	extern unsigned short	ppdata;
 	if (once++ == 0) {
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+		*((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec;
 		ppdata |= 0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
 		outw(0x0001, ioaddr + BANK_SELECT);
 		outw(0x0001, ioaddr + BANK_SELECT);
 		outw(0x0067, ioaddr + BASE);
 
 		ppdata &= ~0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
 	}
 	
 	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
index 0299f6a2deeb..4dec2d9fb994 100644
--- a/arch/m68k/include/asm/nettel.h
+++ b/arch/m68k/include/asm/nettel.h
@@ -48,14 +48,14 @@ extern volatile unsigned short ppdata;
 static __inline__ unsigned int mcf_getppdata(void)
 {
 	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	pp = (volatile unsigned short *) MCFSIM_PADAT;
 	return((unsigned int) *pp);
 }
 
 static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
 {
 	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	pp = (volatile unsigned short *) MCFSIM_PADAT;
 	ppdata = (ppdata & ~mask) | bits;
 	*pp = ppdata;
 }
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 9aa3f90f4855..1f31b060cc8d 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -1,10 +1,12 @@
 #ifndef _M68KNOMMU_PAGE_H
 #define _M68KNOMMU_PAGE_H
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 
 #define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #include <asm/setup.h>
diff --git a/arch/m68k/include/asm/pinmux.h b/arch/m68k/include/asm/pinmux.h
new file mode 100644
index 000000000000..119ee686dbd1
--- /dev/null
+++ b/arch/m68k/include/asm/pinmux.h
@@ -0,0 +1,30 @@
+/*
+ * Coldfire generic GPIO pinmux support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef pinmux_h
+#define pinmux_h
+
+#define MCFPINMUX_NONE		-1
+
+extern int mcf_pinmux_request(unsigned, unsigned);
+extern void mcf_pinmux_release(unsigned, unsigned);
+
+static inline int mcf_pinmux_is_valid(unsigned pinmux)
+{
+	return pinmux != MCFPINMUX_NONE;
+}
+
+#endif
+
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index fc3f2c22f2b8..74fd674b15ad 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -1,5 +1,170 @@
-#ifdef __uClinux__
-#include "processor_no.h"
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/thread_info.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	return sw_usp;
 #else
-#include "processor_mm.h"
+	unsigned long usp;
+	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	sw_usp = usp;
+#else
+	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_SIZE	(0xF0000000UL)
+#else
+#define TASK_SIZE	(0x0E000000UL)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#ifdef CONFIG_MMU
+#ifndef CONFIG_SUN3
+#define TASK_UNMAPPED_BASE	0xC0000000UL
+#else
+#define TASK_UNMAPPED_BASE	0x0A000000UL
+#endif
+#define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
+#else
+#define TASK_UNMAPPED_BASE	0
+#endif
+
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned short sr;		/* saved status register */
+	unsigned short fs;		/* saved fs (sfc, dfc) */
+	unsigned long  crp[2];		/* cpu root pointer */
+	unsigned long  esp0;		/* points to SR of stack frame */
+	unsigned long  faddr;		/* info about last fault */
+	int            signo, code;
+	unsigned long  fp[8*3];
+	unsigned long  fpcntl[3];	/* fp control regs */
+	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+	struct thread_info info;
+};
+
+#define INIT_THREAD  {							\
+	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
+	.sr	= PS_S,							\
+	.fs	= __KERNEL_DS,						\
+	.info	= INIT_THREAD_INFO(init_task),				\
+}
+
+#ifdef CONFIG_MMU
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+				unsigned long usp)
+{
+	/* reads from user space */
+	set_fs(USER_DS);
+
+	regs->pc = pc;
+	regs->sr &= ~0x2000;
+	wrusp(usp);
+}
+
+#else
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#ifdef CONFIG_COLDFIRE
+#define reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
+#else
+#define reformat(_regs)		do { } while (0)
+#endif
+
+#define start_thread(_regs, _pc, _usp)                  \
+do {                                                    \
+	set_fs(USER_DS); /* reads from user space */    \
+	(_regs)->pc = (_pc);                            \
+	((struct switch_stack *)(_regs))[-1].a6 = 0;    \
+	reformat(_regs);                                \
+	if (current->mm)                                \
+		(_regs)->d5 = current->mm->start_data;  \
+	(_regs)->sr &= ~0x2000;                         \
+	wrusp(_usp);                                    \
+} while(0)
+
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    (virt_addr_valid((tsk)->thread.esp0))) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()	barrier()
+
 #endif
diff --git a/arch/m68k/include/asm/processor_mm.h b/arch/m68k/include/asm/processor_mm.h
deleted file mode 100644
index 1f61ef53f0e0..000000000000
--- a/arch/m68k/include/asm/processor_mm.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * include/asm-m68k/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/thread_info.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-static inline unsigned long rdusp(void)
-{
-	unsigned long usp;
-
-	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
-	return usp;
-}
-
-static inline void wrusp(unsigned long usp)
-{
-	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#ifndef CONFIG_SUN3
-#define TASK_SIZE	(0xF0000000UL)
-#else
-#define TASK_SIZE	(0x0E000000UL)
-#endif
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-#endif
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#ifndef CONFIG_SUN3
-#define TASK_UNMAPPED_BASE	0xC0000000UL
-#else
-#define TASK_UNMAPPED_BASE	0x0A000000UL
-#endif
-#define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
-
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned short sr;		/* saved status register */
-	unsigned short fs;		/* saved fs (sfc, dfc) */
-	unsigned long  crp[2];		/* cpu root pointer */
-	unsigned long  esp0;		/* points to SR of stack frame */
-	unsigned long  faddr;		/* info about last fault */
-	int            signo, code;
-	unsigned long  fp[8*3];
-	unsigned long  fpcntl[3];	/* fp control regs */
-	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-	struct thread_info info;
-};
-
-#define INIT_THREAD  {							\
-	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
-	.sr	= PS_S,							\
-	.fs	= __KERNEL_DS,						\
-	.info	= INIT_THREAD_INFO(init_task),				\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
-				unsigned long usp)
-{
-	/* reads from user space */
-	set_fs(USER_DS);
-
-	regs->pc = pc;
-	regs->sr &= ~0x2000;
-	wrusp(usp);
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    (virt_addr_valid((tsk)->thread.esp0))) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()	barrier()
-
-#endif
diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h
deleted file mode 100644
index 7a1e0ba35f5a..000000000000
--- a/arch/m68k/include/asm/processor_no.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * include/asm-m68knommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	return(sw_usp);
-#else
-  	unsigned long usp;
-	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
-	return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	sw_usp = usp;
-#else
-	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE	(0xF0000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE	0
-
-/* 
- * if you change this structure, you must change the code and offsets
- * in m68k/machasm.S
- */
-   
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned short sr;		/* saved status register */
-	unsigned short fs;		/* saved fs (sfc, dfc) */
-	unsigned long  crp[2];		/* cpu root pointer */
-	unsigned long  esp0;		/* points to SR of stack frame */
-	unsigned long  fp[8*3];
-	unsigned long  fpcntl[3];	/* fp control regs */
-	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-};
-
-#define INIT_THREAD  {							\
-	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
-	.sr	= PS_S,							\
-	.fs	= __KERNEL_DS,						\
-}
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#if defined(CONFIG_COLDFIRE)
-#define	reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
-#else
-#define	reformat(_regs)		do { } while (0)
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp)			\
-do {							\
-	set_fs(USER_DS); /* reads from user space */	\
-	(_regs)->pc = (_pc);				\
-	((struct switch_stack *)(_regs))[-1].a6 = 0;	\
-	reformat(_regs);				\
-	if (current->mm)				\
-		(_regs)->d5 = current->mm->start_data;	\
-	(_regs)->sr &= ~0x2000;				\
-	wrusp(_usp);					\
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    (virt_addr_valid((tsk)->thread.esp0))) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()    barrier()
-
-#endif
diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
index b87f2f278f67..6759dad954f6 100644
--- a/arch/m68k/include/asm/timex.h
+++ b/arch/m68k/include/asm/timex.h
@@ -3,10 +3,23 @@
  *
  * m68k architecture timex specifications
  */
-#ifndef _ASMm68k_TIMEX_H
-#define _ASMm68k_TIMEX_H
+#ifndef _ASMm68K_TIMEX_H
+#define _ASMm68K_TIMEX_H
 
+#ifdef CONFIG_COLDFIRE
+/*
+ * CLOCK_TICK_RATE should give the underlying frequency of the tick timer
+ * to make ntp work best.  For Coldfires, that's the main clock.
+ */
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE	MCF_CLK
+#else
+/*
+ * This default CLOCK_TICK_RATE is probably wrong for many 68k boards
+ * Users of those boards will need to check and modify accordingly
+ */
 #define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+#endif
 
 typedef unsigned long cycles_t;
 
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 534376299a99..e2201b90aa22 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -47,6 +47,10 @@ config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
 
+config GENERIC_GPIO
+	bool
+	default n
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -182,6 +186,8 @@ config M527x
 config COLDFIRE
 	bool
 	depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407)
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	default y
 
 config CLOCK_SET
diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index 56e0f4c55a67..c9cac36d4422 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -29,32 +29,6 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 	set_irq_regs(oldregs);
 }
 
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq);
-}
-
-static struct irq_chip m_irq_chip = {
-	.name		= "M68K-INTC",
-	.enable		= enable_vector,
-	.disable	= disable_vector,
-	.ack		= ack_vector,
-};
-
-void __init init_IRQ(void)
-{
-	int irq;
-
-	init_vectors();
-
-	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = NULL;
-		irq_desc[irq].depth = 1;
-		irq_desc[irq].chip = &m_irq_chip;
-	}
-}
-
 int show_interrupts(struct seq_file *p, void *v)
 {
 	struct irqaction *ap;
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index d182b2f72211..a90acf5b0cde 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -69,12 +69,13 @@ static unsigned long read_rtc_mmss(void)
 	if ((year += 1900) < 1970)
 		year += 100;
 
-	return  mktime(year, mon, day, hour, min, sec);;
+	return  mktime(year, mon, day, hour, min, sec);
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	return read_rtc_mmss();
+	ts->tv_sec = read_rtc_mmss();
+	ts->tv_nsec = 0;
 }
 
 int update_persistent_clock(struct timespec now)
diff --git a/arch/m68knommu/lib/checksum.c b/arch/m68knommu/lib/checksum.c
index 269d83bfbbe1..eccf25d3d73e 100644
--- a/arch/m68knommu/lib/checksum.c
+++ b/arch/m68knommu/lib/checksum.c
@@ -92,6 +92,7 @@ out:
 	return result;
 }
 
+#ifdef CONFIG_COLDFIRE
 /*
  *	This is a version of ip_compute_csum() optimized for IP headers,
  *	which always checksum on 4 octet boundaries.
@@ -100,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	return (__force __sum16)~do_csum(iph,ihl*4);
 }
+#endif
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -127,15 +129,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum)
 EXPORT_SYMBOL(csum_partial);
 
 /*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
  * copy from fs while checksumming, otherwise like csum_partial
  */
 
diff --git a/arch/m68knommu/platform/5206/Makefile b/arch/m68knommu/platform/5206/Makefile
index a439d9ab3f27..113c33390064 100644
--- a/arch/m68knommu/platform/5206/Makefile
+++ b/arch/m68knommu/platform/5206/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index f6f79874e9af..9c335465e66d 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -49,11 +49,11 @@ static void __init m5206_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -68,38 +68,19 @@ static void __init m5206_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
+static void __init m5206_timers_init(void)
 {
-	volatile unsigned char  *mbar;
-	unsigned char		icr;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		vec -= 25;
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
-		*(mbar + MCFSIM_ICR1 + vec) = icr;
-		vec = 0x1 << (vec + 1);
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(unsigned int timer, unsigned int level)
-{
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
 }
 
 /***************************************************************************/
@@ -117,15 +98,20 @@ void m5206_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
 	mach_reset = m5206_cpu_reset;
+	m5206_timers_init();
+	m5206_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5206_uarts_init();
 	platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5206/gpio.c b/arch/m68knommu/platform/5206/gpio.c
new file mode 100644
index 000000000000..60f779ce1651
--- /dev/null
+++ b/arch/m68knommu/platform/5206/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile
index a439d9ab3f27..113c33390064 100644
--- a/arch/m68knommu/platform/5206e/Makefile
+++ b/arch/m68knommu/platform/5206e/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 65887799db81..0f41ba82a3b5 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -15,6 +15,7 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
 #include <asm/mcfuart.h>
 
@@ -49,11 +50,11 @@ static void __init m5206e_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -68,38 +69,19 @@ static void __init m5206e_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-	unsigned char		icr;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		vec -= 25;
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
-		*(mbar + MCFSIM_ICR1 + vec) = icr;
-		vec = 0x1 << (vec + 1);
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5206e_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
 }
 
 /***************************************************************************/
@@ -117,8 +99,6 @@ void m5206e_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if defined(CONFIG_NETtel)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
@@ -126,13 +106,19 @@ void __init config_BSP(char *commandp, int size)
 #endif /* CONFIG_NETtel */
 
 	mach_reset = m5206e_cpu_reset;
+	m5206e_timers_init();
+	m5206e_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5206e_uarts_init();
 	platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5206e/gpio.c b/arch/m68knommu/platform/5206e/gpio.c
new file mode 100644
index 000000000000..60f779ce1651
--- /dev/null
+++ b/arch/m68knommu/platform/5206e/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
index a50e76acc8fd..435ab3483dc1 100644
--- a/arch/m68knommu/platform/520x/Makefile
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -14,4 +14,4 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 1c43a8aec69b..92614de42cd3 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -81,20 +81,11 @@ static struct platform_device *m520x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m520x_uart_init_line(int line, int irq)
 {
-	u32 imr;
 	u16 par;
 	u8 par2;
 
-	writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	switch (line) {
 	case 0:
 		par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
@@ -131,18 +122,8 @@ static void __init m520x_uarts_init(void)
 
 static void __init m520x_fec_init(void)
 {
-	u32 imr;
 	u8 v;
 
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 36);
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40);
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42);
-
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0x0001FFF0;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-
 	/* Set multi-function pins to ethernet mode */
 	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC);
 	writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC);
@@ -153,17 +134,6 @@ static void __init m520x_fec_init(void)
 
 /***************************************************************************/
 
-/*
- *  Program the vector to be an auto-vectored.
- */
-
-void mcf_autovector(unsigned int vec)
-{
-    /* Everything is auto-vectored on the 520x devices */
-}
-
-/***************************************************************************/
-
 static void m520x_cpu_reset(void)
 {
 	local_irq_disable();
diff --git a/arch/m68knommu/platform/520x/gpio.c b/arch/m68knommu/platform/520x/gpio.c
new file mode 100644
index 000000000000..15b5bb62a698
--- /dev/null
+++ b/arch/m68knommu/platform/520x/gpio.c
@@ -0,0 +1,211 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BE",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BE,
+		.podr				= MCFGPIO_PODR_BE,
+		.ppdr				= MCFGPIO_PPDSDR_BE,
+		.setr				= MCFGPIO_PPDSDR_BE,
+		.clrr				= MCFGPIO_PCLRR_BE,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 25,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 48,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UART",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UART,
+		.podr				= MCFGPIO_PODR_UART,
+		.ppdr				= MCFGPIO_PPDSDR_UART,
+		.setr				= MCFGPIO_PPDSDR_UART,
+		.clrr				= MCFGPIO_PCLRR_UART,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECH,
+		.podr				= MCFGPIO_PODR_FECH,
+		.ppdr				= MCFGPIO_PPDSDR_FECH,
+		.setr				= MCFGPIO_PPDSDR_FECH,
+		.clrr				= MCFGPIO_PCLRR_FECH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECL,
+		.podr				= MCFGPIO_PODR_FECL,
+		.ppdr				= MCFGPIO_PPDSDR_FECL,
+		.setr				= MCFGPIO_PPDSDR_FECL,
+		.clrr				= MCFGPIO_PCLRR_FECL,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile
index 5694d593f029..b8f9b45440c2 100644
--- a/arch/m68knommu/platform/523x/Makefile
+++ b/arch/m68knommu/platform/523x/Makefile
@@ -14,4 +14,4 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
index 961fefebca14..6ba84f2aa397 100644
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -82,66 +82,20 @@ static struct platform_device *m523x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
-static void __init m523x_uart_init_line(int line, int irq)
-{
-	u32 imr;
-
-	if ((line < 0) || (line > 2))
-		return;
-
-	writeb(0x30+line, (INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line));
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-}
-
-static void __init m523x_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m523x_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m523x_uart_init_line(line, m523x_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
 static void __init m523x_fec_init(void)
 {
-	u32 imr;
-
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
-	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
-	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
-
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0xf;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-	imr &= ~0xff800001;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-}
-
-/***************************************************************************/
-
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
+	u16 par;
+	u8 v;
+
+	/* Set multi-function pins to ethernet use */
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100078);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
 }
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 523x */
-}
-/***************************************************************************/
-
 static void m523x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -152,16 +106,14 @@ static void m523x_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_disableall();
 	mach_reset = m523x_cpu_reset;
-	m523x_uarts_init();
-	m523x_fec_init();
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
+	m523x_fec_init();
 	platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/523x/gpio.c b/arch/m68knommu/platform/523x/gpio.c
new file mode 100644
index 000000000000..f02840d54d3c
--- /dev/null
+++ b/arch/m68knommu/platform/523x/gpio.c
@@ -0,0 +1,283 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ADDR",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 13,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ADDR,
+		.podr				= MCFGPIO_PODR_ADDR,
+		.ppdr				= MCFGPIO_PPDSDR_ADDR,
+		.setr				= MCFGPIO_PPDSDR_ADDR,
+		.clrr				= MCFGPIO_PCLRR_ADDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAH,
+		.podr				= MCFGPIO_PODR_DATAH,
+		.ppdr				= MCFGPIO_PPDSDR_DATAH,
+		.setr				= MCFGPIO_PPDSDR_DATAH,
+		.clrr				= MCFGPIO_PCLRR_DATAH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAL,
+		.podr				= MCFGPIO_PODR_DATAL,
+		.ppdr				= MCFGPIO_PPDSDR_DATAL,
+		.setr				= MCFGPIO_PPDSDR_DATAL,
+		.clrr				= MCFGPIO_PCLRR_DATAL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BS,
+		.podr				= MCFGPIO_PODR_BS,
+		.ppdr				= MCFGPIO_PPDSDR_BS,
+		.setr				= MCFGPIO_PPDSDR_BS,
+		.clrr				= MCFGPIO_PCLRR_BS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 49,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SDRAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_SDRAM,
+		.podr				= MCFGPIO_PODR_SDRAM,
+		.ppdr				= MCFGPIO_PPDSDR_SDRAM,
+		.setr				= MCFGPIO_PPDSDR_SDRAM,
+		.clrr				= MCFGPIO_PCLRR_SDRAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTH,
+		.podr				= MCFGPIO_PODR_UARTH,
+		.ppdr				= MCFGPIO_PPDSDR_UARTH,
+		.setr				= MCFGPIO_PPDSDR_UARTH,
+		.clrr				= MCFGPIO_PCLRR_UARTH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTL,
+		.podr				= MCFGPIO_PODR_UARTL,
+		.ppdr				= MCFGPIO_PPDSDR_UARTL,
+		.setr				= MCFGPIO_PPDSDR_UARTL,
+		.clrr				= MCFGPIO_PCLRR_UARTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ETPU",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ETPU,
+		.podr				= MCFGPIO_PODR_ETPU,
+		.ppdr				= MCFGPIO_PPDSDR_ETPU,
+		.setr				= MCFGPIO_PPDSDR_ETPU,
+		.clrr				= MCFGPIO_PCLRR_ETPU,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/5249/Makefile b/arch/m68knommu/platform/5249/Makefile
index a439d9ab3f27..f56225d1582f 100644
--- a/arch/m68knommu/platform/5249/Makefile
+++ b/arch/m68knommu/platform/5249/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o intc2.o
 
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 93d998825925..646f5ba462fc 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -48,11 +48,11 @@ static void __init m5249_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -65,38 +65,21 @@ static void __init m5249_uarts_init(void)
 		m5249_uart_init_line(line, m5249_uart_platform[line].irq);
 }
 
-
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
+static void __init m5249_timers_init(void)
 {
-	volatile unsigned char  *mbar;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		vec = 0x1 << (vec - 24);
-		*(mbar + MCFSIM_AVR) |= vec;
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(unsigned int timer, unsigned int level)
-{
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
 }
 
 /***************************************************************************/
@@ -114,15 +97,15 @@ void m5249_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
 	mach_reset = m5249_cpu_reset;
+	m5249_timers_init();
+	m5249_uarts_init();
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5249_uarts_init();
 	platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5249/gpio.c b/arch/m68knommu/platform/5249/gpio.c
new file mode 100644
index 000000000000..c611eab8b3b6
--- /dev/null
+++ b/arch/m68knommu/platform/5249/gpio.c
@@ -0,0 +1,65 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "GPIO0",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 32,
+		},
+		.pddr				= MCFSIM2_GPIOENABLE,
+		.podr				= MCFSIM2_GPIOWRITE,
+		.ppdr				= MCFSIM2_GPIOREAD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "GPIO1",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 32,
+			.ngpio			= 32,
+		},
+		.pddr				= MCFSIM2_GPIO1ENABLE,
+		.podr				= MCFSIM2_GPIO1WRITE,
+		.ppdr				= MCFSIM2_GPIO1READ,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/5249/intc2.c b/arch/m68knommu/platform/5249/intc2.c
new file mode 100644
index 000000000000..d09d9da04537
--- /dev/null
+++ b/arch/m68knommu/platform/5249/intc2.c
@@ -0,0 +1,59 @@
+/*
+ * intc2.c  -- support for the 2nd INTC controller of the 5249
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(unsigned int irq)
+{
+	u32 imr;
+	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	imr &= ~(0x1 << (irq - MCFINTC2_GPIOIRQ0));
+	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(unsigned int irq)
+{
+	u32 imr;
+	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	imr |= (0x1 << (irq - MCFINTC2_GPIOIRQ0));
+	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(unsigned int irq)
+{
+	writel(0x1 << (irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+	.name		= "CF-INTC2",
+	.mask		= intc2_irq_gpio_mask,
+	.unmask		= intc2_irq_gpio_unmask,
+	.ack		= intc2_irq_gpio_ack,
+};
+
+static int __init mcf_intc2_init(void)
+{
+	int irq;
+
+	/* GPIO interrupt sources */
+	for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++)
+		irq_desc[irq].chip = &intc2_irq_gpio_chip;
+
+	return 0;
+}
+
+arch_initcall(mcf_intc2_init);
diff --git a/arch/m68knommu/platform/5272/Makefile b/arch/m68knommu/platform/5272/Makefile
index 26135d92b34d..93673ef8e2c1 100644
--- a/arch/m68knommu/platform/5272/Makefile
+++ b/arch/m68knommu/platform/5272/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o intc.o
 
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 5f95fcde05fd..59278c0887d0 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -20,12 +20,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 /*
  *	Some platforms need software versions of the GPIO data registers.
  */
@@ -37,11 +31,11 @@ unsigned char ledbank = 0xff;
 static struct mcf_platform_uart m5272_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
+		.irq		= MCF_IRQ_UART1,
 	},
 	{
 		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
+		.irq		= MCF_IRQ_UART2,
 	},
 	{ },
 };
@@ -59,18 +53,18 @@ static struct resource m5272_fec_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= 86,
-		.end		= 86,
+		.start		= MCF_IRQ_ERX,
+		.end		= MCF_IRQ_ERX,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 87,
-		.end		= 87,
+		.start		= MCF_IRQ_ETX,
+		.end		= MCF_IRQ_ETX,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 88,
-		.end		= 88,
+		.start		= MCF_IRQ_ENTC,
+		.end		= MCF_IRQ_ENTC,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -94,9 +88,6 @@ static void __init m5272_uart_init_line(int line, int irq)
 	u32 v;
 
 	if ((line >= 0) && (line < 2)) {
-		v = (line) ? 0x0e000000 : 0xe0000000;
-		writel(v, MCF_MBAR + MCFSIM_ICR2);
-
 		/* Enable the output lines for the serial ports */
 		v = readl(MCF_MBAR + MCFSIM_PBCNT);
 		v = (v & ~0x000000ff) | 0x00000055;
@@ -119,54 +110,6 @@ static void __init m5272_uarts_init(void)
 
 /***************************************************************************/
 
-static void __init m5272_fec_init(void)
-{
-	u32 imr;
-
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	imr = readl(MCF_MBAR + MCFSIM_ICR3);
-	imr = (imr & ~0x00000fff) | 0x00000ddd;
-	writel(imr, MCF_MBAR + MCFSIM_ICR3);
-
-	imr = readl(MCF_MBAR + MCFSIM_ICR1);
-	imr = (imr & ~0x0f000000) | 0x0d000000;
-	writel(imr, MCF_MBAR + MCFSIM_ICR1);
-}
-
-/***************************************************************************/
-
-void mcf_disableall(void)
-{
-	volatile unsigned long	*icrp;
-
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	icrp[0] = 0x88888888;
-	icrp[1] = 0x88888888;
-	icrp[2] = 0x88888888;
-	icrp[3] = 0x88888888;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(int timer, int level)
-{
-	volatile unsigned long *icrp;
-
-	if ((timer >= 1 ) && (timer <= 4)) {
-		icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-		*icrp = (0x8 | level) << ((4 - timer) * 4);
-	}
-}
-
-/***************************************************************************/
-
 static void m5272_cpu_reset(void)
 {
 	local_irq_disable();
@@ -190,8 +133,6 @@ void __init config_BSP(char *commandp, int size)
 	*pivrp = 0x40;
 #endif
 
-	mcf_disableall();
-
 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
@@ -202,8 +143,6 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif
 
-	mcf_timervector = 69;
-	mcf_profilevector = 70;
 	mach_reset = m5272_cpu_reset;
 }
 
@@ -212,7 +151,6 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
-	m5272_fec_init();
 	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5272/gpio.c b/arch/m68knommu/platform/5272/gpio.c
new file mode 100644
index 000000000000..459db89a89cc
--- /dev/null
+++ b/arch/m68knommu/platform/5272/gpio.c
@@ -0,0 +1,81 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "PB",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 16,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PBDDR,
+		.podr				= MCFSIM_PBDAT,
+		.ppdr				= MCFSIM_PBDAT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "PC",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 32,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PCDDR,
+		.podr				= MCFSIM_PCDAT,
+		.ppdr				= MCFSIM_PCDAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c
new file mode 100644
index 000000000000..7081e0a9720e
--- /dev/null
+++ b/arch/m68knommu/platform/5272/intc.c
@@ -0,0 +1,138 @@
+/*
+ * intc.c  --  interrupt controller or ColdFire 5272 SoC
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * The 5272 ColdFire interrupt controller is nothing like any other
+ * ColdFire interrupt controller - it truly is completely different.
+ * Given its age it is unlikely to be used on any other ColdFire CPU.
+ */
+
+/*
+ * The masking and priproty setting of interrupts on the 5272 is done
+ * via a set of 4 "Interrupt Controller Registers" (ICR). There is a
+ * loose mapping of vector number to register and internal bits, but
+ * a table is the easiest and quickest way to map them.
+ */
+struct irqmap {
+	unsigned char	icr;
+	unsigned char	index;
+	unsigned char	ack;
+};
+
+static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
+	/*MCF_IRQ_SPURIOUS*/	{ .icr = 0,           .index = 0,  .ack = 0, },
+	/*MCF_IRQ_EINT1*/	{ .icr = MCFSIM_ICR1, .index = 28, .ack = 1, },
+	/*MCF_IRQ_EINT2*/	{ .icr = MCFSIM_ICR1, .index = 24, .ack = 1, },
+	/*MCF_IRQ_EINT3*/	{ .icr = MCFSIM_ICR1, .index = 20, .ack = 1, },
+	/*MCF_IRQ_EINT4*/	{ .icr = MCFSIM_ICR1, .index = 16, .ack = 1, },
+	/*MCF_IRQ_TIMER1*/	{ .icr = MCFSIM_ICR1, .index = 12, .ack = 0, },
+	/*MCF_IRQ_TIMER2*/	{ .icr = MCFSIM_ICR1, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_TIMER3*/	{ .icr = MCFSIM_ICR1, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_TIMER4*/	{ .icr = MCFSIM_ICR1, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_UART1*/	{ .icr = MCFSIM_ICR2, .index = 28, .ack = 0, },
+	/*MCF_IRQ_UART2*/	{ .icr = MCFSIM_ICR2, .index = 24, .ack = 0, },
+	/*MCF_IRQ_PLIP*/	{ .icr = MCFSIM_ICR2, .index = 20, .ack = 0, },
+	/*MCF_IRQ_PLIA*/	{ .icr = MCFSIM_ICR2, .index = 16, .ack = 0, },
+	/*MCF_IRQ_USB0*/	{ .icr = MCFSIM_ICR2, .index = 12, .ack = 0, },
+	/*MCF_IRQ_USB1*/	{ .icr = MCFSIM_ICR2, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_USB2*/	{ .icr = MCFSIM_ICR2, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_USB3*/	{ .icr = MCFSIM_ICR2, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_USB4*/	{ .icr = MCFSIM_ICR3, .index = 28, .ack = 0, },
+	/*MCF_IRQ_USB5*/	{ .icr = MCFSIM_ICR3, .index = 24, .ack = 0, },
+	/*MCF_IRQ_USB6*/	{ .icr = MCFSIM_ICR3, .index = 20, .ack = 0, },
+	/*MCF_IRQ_USB7*/	{ .icr = MCFSIM_ICR3, .index = 16, .ack = 0, },
+	/*MCF_IRQ_DMA*/		{ .icr = MCFSIM_ICR3, .index = 12, .ack = 0, },
+	/*MCF_IRQ_ERX*/		{ .icr = MCFSIM_ICR3, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_ETX*/		{ .icr = MCFSIM_ICR3, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_ENTC*/	{ .icr = MCFSIM_ICR3, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_QSPI*/	{ .icr = MCFSIM_ICR4, .index = 28, .ack = 0, },
+	/*MCF_IRQ_EINT5*/	{ .icr = MCFSIM_ICR4, .index = 24, .ack = 1, },
+	/*MCF_IRQ_EINT6*/	{ .icr = MCFSIM_ICR4, .index = 20, .ack = 1, },
+	/*MCF_IRQ_SWTO*/	{ .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
+};
+
+static void intc_irq_mask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		u32 v;
+		irq -= MCFINT_VECBASE;
+		v = 0x8 << intc_irqmap[irq].index;
+		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+	}
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		u32 v;
+		irq -= MCFINT_VECBASE;
+		v = 0xd << intc_irqmap[irq].index;
+		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+	}
+}
+
+static void intc_irq_ack(unsigned int irq)
+{
+	/* Only external interrupts are acked */
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		irq -= MCFINT_VECBASE;
+		if (intc_irqmap[irq].ack) {
+			u32 v;
+			v = 0xd << intc_irqmap[irq].index;
+			writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+		}
+	}
+}
+
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+	/* We can set the edge type here for external interrupts */
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.ack		= intc_irq_ack,
+	.set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	/* Mask all interrupt sources */
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR1);
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR2);
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR3);
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR4);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+		intc_irq_set_type(irq, 0);
+	}
+}
+
diff --git a/arch/m68knommu/platform/527x/Makefile b/arch/m68knommu/platform/527x/Makefile
index 26135d92b34d..3d90e6d92459 100644
--- a/arch/m68knommu/platform/527x/Makefile
+++ b/arch/m68knommu/platform/527x/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index f746439cfd3e..fa51be172830 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -116,23 +116,13 @@ static struct platform_device *m527x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m527x_uart_init_line(int line, int irq)
 {
 	u16 sepmask;
-	u32 imr;
 
 	if ((line < 0) || (line > 2))
 		return;
 
-	/* level 6, line based priority */
-	writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	/*
 	 * External Pin Mask Setting & Enable External Pin for Interface
 	 */
@@ -157,32 +147,11 @@ static void __init m527x_uarts_init(void)
 
 /***************************************************************************/
 
-static void __init m527x_fec_irq_init(int nr)
-{
-	unsigned long base;
-	u32 imr;
-
-	base = MCF_IPSBAR + (nr ? MCFICM_INTC1 : MCFICM_INTC0);
-
-	writeb(0x28, base + MCFINTC_ICR0 + 23);
-	writeb(0x27, base + MCFINTC_ICR0 + 27);
-	writeb(0x26, base + MCFINTC_ICR0 + 29);
-
-	imr = readl(base + MCFINTC_IMRH);
-	imr &= ~0xf;
-	writel(imr, base + MCFINTC_IMRH);
-	imr = readl(base + MCFINTC_IMRL);
-	imr &= ~0xff800001;
-	writel(imr, base + MCFINTC_IMRL);
-}
-
 static void __init m527x_fec_init(void)
 {
 	u16 par;
 	u8 v;
 
-	m527x_fec_irq_init(0);
-
 	/* Set multi-function pins to ethernet mode for fec0 */
 #if defined(CONFIG_M5271)
 	v = readb(MCF_IPSBAR + 0x100047);
@@ -195,8 +164,6 @@ static void __init m527x_fec_init(void)
 #endif
 
 #ifdef CONFIG_FEC2
-	m527x_fec_irq_init(1);
-
 	/* Set multi-function pins to ethernet mode for fec1 */
 	par = readw(MCF_IPSBAR + 0x100082);
 	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
@@ -207,21 +174,6 @@ static void __init m527x_fec_init(void)
 
 /***************************************************************************/
 
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
 static void m527x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -232,7 +184,6 @@ static void m527x_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_disableall();
 	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
diff --git a/arch/m68knommu/platform/527x/gpio.c b/arch/m68knommu/platform/527x/gpio.c
new file mode 100644
index 000000000000..1028142851ac
--- /dev/null
+++ b/arch/m68knommu/platform/527x/gpio.c
@@ -0,0 +1,607 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+#if defined(CONFIG_M5271)
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ADDR",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 13,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ADDR,
+		.podr				= MCFGPIO_PODR_ADDR,
+		.ppdr				= MCFGPIO_PPDSDR_ADDR,
+		.setr				= MCFGPIO_PPDSDR_ADDR,
+		.clrr				= MCFGPIO_PCLRR_ADDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAH,
+		.podr				= MCFGPIO_PODR_DATAH,
+		.ppdr				= MCFGPIO_PPDSDR_DATAH,
+		.setr				= MCFGPIO_PPDSDR_DATAH,
+		.clrr				= MCFGPIO_PCLRR_DATAH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAL,
+		.podr				= MCFGPIO_PODR_DATAL,
+		.ppdr				= MCFGPIO_PPDSDR_DATAL,
+		.setr				= MCFGPIO_PPDSDR_DATAL,
+		.clrr				= MCFGPIO_PCLRR_DATAL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BS,
+		.podr				= MCFGPIO_PODR_BS,
+		.ppdr				= MCFGPIO_PPDSDR_BS,
+		.setr				= MCFGPIO_PPDSDR_BS,
+		.clrr				= MCFGPIO_PCLRR_BS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 49,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SDRAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_SDRAM,
+		.podr				= MCFGPIO_PODR_SDRAM,
+		.ppdr				= MCFGPIO_PPDSDR_SDRAM,
+		.setr				= MCFGPIO_PPDSDR_SDRAM,
+		.clrr				= MCFGPIO_PCLRR_SDRAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTH,
+		.podr				= MCFGPIO_PODR_UARTH,
+		.ppdr				= MCFGPIO_PPDSDR_UARTH,
+		.setr				= MCFGPIO_PPDSDR_UARTH,
+		.clrr				= MCFGPIO_PCLRR_UARTH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTL,
+		.podr				= MCFGPIO_PODR_UARTL,
+		.ppdr				= MCFGPIO_PPDSDR_UARTL,
+		.setr				= MCFGPIO_PPDSDR_UARTL,
+		.clrr				= MCFGPIO_PCLRR_UARTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+#elif defined(CONFIG_M5275)
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ADDR",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 21,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ADDR,
+		.podr				= MCFGPIO_PODR_ADDR,
+		.ppdr				= MCFGPIO_PPDSDR_ADDR,
+		.setr				= MCFGPIO_PPDSDR_ADDR,
+		.clrr				= MCFGPIO_PCLRR_ADDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 25,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC0H",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC0H,
+		.podr				= MCFGPIO_PODR_FEC0H,
+		.ppdr				= MCFGPIO_PPDSDR_FEC0H,
+		.setr				= MCFGPIO_PPDSDR_FEC0H,
+		.clrr				= MCFGPIO_PCLRR_FEC0H,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC0L",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC0L,
+		.podr				= MCFGPIO_PODR_FEC0L,
+		.ppdr				= MCFGPIO_PPDSDR_FEC0L,
+		.setr				= MCFGPIO_PPDSDR_FEC0L,
+		.clrr				= MCFGPIO_PCLRR_FEC0L,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 48,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SDRAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_SDRAM,
+		.podr				= MCFGPIO_PODR_SDRAM,
+		.ppdr				= MCFGPIO_PPDSDR_SDRAM,
+		.setr				= MCFGPIO_PPDSDR_SDRAM,
+		.clrr				= MCFGPIO_PCLRR_SDRAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMERH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMERH,
+		.podr				= MCFGPIO_PODR_TIMERH,
+		.ppdr				= MCFGPIO_PPDSDR_TIMERH,
+		.setr				= MCFGPIO_PPDSDR_TIMERH,
+		.clrr				= MCFGPIO_PCLRR_TIMERH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMERL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMERL,
+		.podr				= MCFGPIO_PODR_TIMERL,
+		.ppdr				= MCFGPIO_PPDSDR_TIMERL,
+		.setr				= MCFGPIO_PPDSDR_TIMERL,
+		.clrr				= MCFGPIO_PCLRR_TIMERL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTL,
+		.podr				= MCFGPIO_PODR_UARTL,
+		.ppdr				= MCFGPIO_PPDSDR_UARTL,
+		.setr				= MCFGPIO_PPDSDR_UARTL,
+		.clrr				= MCFGPIO_PCLRR_UARTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC1H",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC1H,
+		.podr				= MCFGPIO_PODR_FEC1H,
+		.ppdr				= MCFGPIO_PPDSDR_FEC1H,
+		.setr				= MCFGPIO_PPDSDR_FEC1H,
+		.clrr				= MCFGPIO_PCLRR_FEC1H,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC1L",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC1L,
+		.podr				= MCFGPIO_PODR_FEC1L,
+		.ppdr				= MCFGPIO_PPDSDR_FEC1L,
+		.setr				= MCFGPIO_PPDSDR_FEC1L,
+		.clrr				= MCFGPIO_PCLRR_FEC1L,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 114,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_BS,
+		.podr				= MCFGPIO_PODR_BS,
+		.ppdr				= MCFGPIO_PPDSDR_BS,
+		.setr				= MCFGPIO_PPDSDR_BS,
+		.clrr				= MCFGPIO_PCLRR_BS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "IRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 121,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_IRQ,
+		.podr				= MCFGPIO_PODR_IRQ,
+		.ppdr				= MCFGPIO_PPDSDR_IRQ,
+		.setr				= MCFGPIO_PPDSDR_IRQ,
+		.clrr				= MCFGPIO_PCLRR_IRQ,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "USBH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 128,
+			.ngpio			= 1,
+		},
+		.pddr				= MCFGPIO_PDDR_USBH,
+		.podr				= MCFGPIO_PODR_USBH,
+		.ppdr				= MCFGPIO_PPDSDR_USBH,
+		.setr				= MCFGPIO_PPDSDR_USBH,
+		.clrr				= MCFGPIO_PCLRR_USBH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "USBL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 136,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_USBL,
+		.podr				= MCFGPIO_PODR_USBL,
+		.ppdr				= MCFGPIO_PPDSDR_USBL,
+		.setr				= MCFGPIO_PPDSDR_USBL,
+		.clrr				= MCFGPIO_PCLRR_USBL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 144,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTH,
+		.podr				= MCFGPIO_PODR_UARTH,
+		.ppdr				= MCFGPIO_PPDSDR_UARTH,
+		.setr				= MCFGPIO_PPDSDR_UARTH,
+		.clrr				= MCFGPIO_PCLRR_UARTH,
+	},
+#endif
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/528x/Makefile b/arch/m68knommu/platform/528x/Makefile
index 26135d92b34d..3d90e6d92459 100644
--- a/arch/m68knommu/platform/528x/Makefile
+++ b/arch/m68knommu/platform/528x/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index a1d1a61c4fe6..6e608d1836f1 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -3,8 +3,8 @@
 /*
  *	linux/arch/m68knommu/platform/528x/config.c
  *
- *	Sub-architcture dependant initialization code for the Motorola
- *	5280 and 5282 CPUs.
+ *	Sub-architcture dependant initialization code for the Freescale
+ *	5280, 5281 and 5282 CPUs.
  *
  *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
  *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
@@ -15,20 +15,13 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
 /***************************************************************************/
 
 static struct mcf_platform_uart m528x_uart_platform[] = {
@@ -91,23 +84,13 @@ static struct platform_device *m528x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m528x_uart_init_line(int line, int irq)
 {
 	u8 port;
-	u32 imr;
 
 	if ((line < 0) || (line > 2))
 		return;
 
-	/* level 6, line based priority */
-	writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	/* make sure PUAPAR is set for UART0 and UART1 */
 	if (line < 2) {
 		port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
@@ -129,21 +112,8 @@ static void __init m528x_uarts_init(void)
 
 static void __init m528x_fec_init(void)
 {
-	u32 imr;
 	u16 v16;
 
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
-	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
-	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
-
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0xf;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-	imr &= ~0xff800001;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-
 	/* Set multi-function pins to ethernet mode for fec0 */
 	v16 = readw(MCF_IPSBAR + 0x100056);
 	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
@@ -152,21 +122,6 @@ static void __init m528x_fec_init(void)
 
 /***************************************************************************/
 
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
 static void m528x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -204,8 +159,6 @@ void wildfiremod_halt(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_disableall();
-
 #ifdef CONFIG_WILDFIRE
 	mach_halt = wildfire_halt;
 #endif
diff --git a/arch/m68knommu/platform/528x/gpio.c b/arch/m68knommu/platform/528x/gpio.c
new file mode 100644
index 000000000000..ec593950696a
--- /dev/null
+++ b/arch/m68knommu/platform/528x/gpio.c
@@ -0,0 +1,438 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "NQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 1,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPTA_GPTDDR,
+		.podr				= MCFGPTA_GPTPORT,
+		.ppdr				= MCFGPTB_GPTPORT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TB",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPTB_GPTDDR,
+		.podr				= MCFGPTB_GPTPORT,
+		.ppdr				= MCFGPTB_GPTPORT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFQADC_DDRQA,
+		.podr				= MCFQADC_PORTQA,
+		.ppdr				= MCFQADC_PORTQA,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QB",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFQADC_DDRQB,
+		.podr				= MCFQADC_PORTQB,
+		.ppdr				= MCFQADC_PORTQB,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "A",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRA,
+		.podr				= MCFGPIO_PORTA,
+		.ppdr				= MCFGPIO_PORTAP,
+		.setr				= MCFGPIO_SETA,
+		.clrr				= MCFGPIO_CLRA,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "B",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 48,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRB,
+		.podr				= MCFGPIO_PORTB,
+		.ppdr				= MCFGPIO_PORTBP,
+		.setr				= MCFGPIO_SETB,
+		.clrr				= MCFGPIO_CLRB,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRC,
+		.podr				= MCFGPIO_PORTC,
+		.ppdr				= MCFGPIO_PORTCP,
+		.setr				= MCFGPIO_SETC,
+		.clrr				= MCFGPIO_CLRC,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "D",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRD,
+		.podr				= MCFGPIO_PORTD,
+		.ppdr				= MCFGPIO_PORTDP,
+		.setr				= MCFGPIO_SETD,
+		.clrr				= MCFGPIO_CLRD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "E",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRE,
+		.podr				= MCFGPIO_PORTE,
+		.ppdr				= MCFGPIO_PORTEP,
+		.setr				= MCFGPIO_SETE,
+		.clrr				= MCFGPIO_CLRE,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "F",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRF,
+		.podr				= MCFGPIO_PORTF,
+		.ppdr				= MCFGPIO_PORTFP,
+		.setr				= MCFGPIO_SETF,
+		.clrr				= MCFGPIO_CLRF,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "G",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRG,
+		.podr				= MCFGPIO_PORTG,
+		.ppdr				= MCFGPIO_PORTGP,
+		.setr				= MCFGPIO_SETG,
+		.clrr				= MCFGPIO_CLRG,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "H",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRH,
+		.podr				= MCFGPIO_PORTH,
+		.ppdr				= MCFGPIO_PORTHP,
+		.setr				= MCFGPIO_SETH,
+		.clrr				= MCFGPIO_CLRH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "J",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRJ,
+		.podr				= MCFGPIO_PORTJ,
+		.ppdr				= MCFGPIO_PORTJP,
+		.setr				= MCFGPIO_SETJ,
+		.clrr				= MCFGPIO_CLRJ,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DD",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 112,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRDD,
+		.podr				= MCFGPIO_PORTDD,
+		.ppdr				= MCFGPIO_PORTDDP,
+		.setr				= MCFGPIO_SETDD,
+		.clrr				= MCFGPIO_CLRDD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "EH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 120,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDREH,
+		.podr				= MCFGPIO_PORTEH,
+		.ppdr				= MCFGPIO_PORTEHP,
+		.setr				= MCFGPIO_SETEH,
+		.clrr				= MCFGPIO_CLREH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "EL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 128,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDREL,
+		.podr				= MCFGPIO_PORTEL,
+		.ppdr				= MCFGPIO_PORTELP,
+		.setr				= MCFGPIO_SETEL,
+		.clrr				= MCFGPIO_CLREL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "AS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 136,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_DDRAS,
+		.podr				= MCFGPIO_PORTAS,
+		.ppdr				= MCFGPIO_PORTASP,
+		.setr				= MCFGPIO_SETAS,
+		.clrr				= MCFGPIO_CLRAS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 144,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_DDRQS,
+		.podr				= MCFGPIO_PORTQS,
+		.ppdr				= MCFGPIO_PORTQSP,
+		.setr				= MCFGPIO_SETQS,
+		.clrr				= MCFGPIO_CLRQS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SD",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 152,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_DDRSD,
+		.podr				= MCFGPIO_PORTSD,
+		.ppdr				= MCFGPIO_PORTSDP,
+		.setr				= MCFGPIO_SETSD,
+		.clrr				= MCFGPIO_CLRSD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TC",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 160,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_DDRTC,
+		.podr				= MCFGPIO_PORTTC,
+		.ppdr				= MCFGPIO_PORTTCP,
+		.setr				= MCFGPIO_SETTC,
+		.clrr				= MCFGPIO_CLRTC,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TD",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 168,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_DDRTD,
+		.podr				= MCFGPIO_PORTTD,
+		.ppdr				= MCFGPIO_PORTTDP,
+		.setr				= MCFGPIO_SETTD,
+		.clrr				= MCFGPIO_CLRTD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 176,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_DDRUA,
+		.podr				= MCFGPIO_PORTUA,
+		.ppdr				= MCFGPIO_PORTUAP,
+		.setr				= MCFGPIO_SETUA,
+		.clrr				= MCFGPIO_CLRUA,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index cfd586860fd8..667db6598451 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y	+= config.o
+obj-y	+= config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 39da9e9ff674..00900ac06a9c 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -21,12 +21,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 /*
  *	Some platforms need software versions of the GPIO data registers.
  */
@@ -64,11 +58,11 @@ static void __init m5307_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -83,35 +77,19 @@ static void __init m5307_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		vec = 0x1 << (vec - 24);
-		*(mbar + MCFSIM_AVR) |= vec;
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5307_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
 }
 
 /***************************************************************************/
@@ -129,20 +107,22 @@ void m5307_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if defined(CONFIG_NETtel) || \
     defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
 	commandp[size-1] = 0;
-	/* Different timer setup - to prevent device clash */
-	mcf_timervector = 30;
-	mcf_profilevector = 31;
-	mcf_timerlevel = 6;
 #endif
 
 	mach_reset = m5307_cpu_reset;
+	m5307_timers_init();
+	m5307_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 
 #ifdef CONFIG_BDM_DISABLE
 	/*
@@ -158,7 +138,6 @@ void __init config_BSP(char *commandp, int size)
 
 static int __init init_BSP(void)
 {
-	m5307_uarts_init();
 	platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5307/gpio.c b/arch/m68knommu/platform/5307/gpio.c
new file mode 100644
index 000000000000..8da5880e4066
--- /dev/null
+++ b/arch/m68knommu/platform/5307/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/532x/Makefile b/arch/m68knommu/platform/532x/Makefile
index e431912f5628..4cc23245bcd1 100644
--- a/arch/m68knommu/platform/532x/Makefile
+++ b/arch/m68knommu/platform/532x/Makefile
@@ -15,4 +15,4 @@
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 #obj-y := config.o usb-mcf532x.o spi-mcf532x.o
-obj-y := config.o
+obj-y := config.o gpio.o
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index cdb761971f7a..d632948e64e5 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -20,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -31,12 +30,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m532x_uart_platform[] = {
 	{
 		.mapbase	= MCFUART_BASE1,
@@ -88,6 +81,7 @@ static struct platform_device m532x_fec = {
 	.num_resources		= ARRAY_SIZE(m532x_fec_resources),
 	.resource		= m532x_fec_resources,
 };
+
 static struct platform_device *m532x_devices[] __initdata = {
 	&m532x_uart,
 	&m532x_fec,
@@ -98,18 +92,11 @@ static struct platform_device *m532x_devices[] __initdata = {
 static void __init m532x_uart_init_line(int line, int irq)
 {
 	if (line == 0) {
-		MCF_INTC0_ICR26 = 0x3;
-		MCF_INTC0_CIMR = 26;
 		/* GPIO initialization */
 		MCF_GPIO_PAR_UART |= 0x000F;
 	} else if (line == 1) {
-		MCF_INTC0_ICR27 = 0x3;
-		MCF_INTC0_CIMR = 27;
 		/* GPIO initialization */
 		MCF_GPIO_PAR_UART |= 0x0FF0;
-	} else if (line == 2) {
-		MCF_INTC0_ICR28 = 0x3;
-		MCF_INTC0_CIMR = 28;
 	}
 }
 
@@ -125,14 +112,6 @@ static void __init m532x_uarts_init(void)
 
 static void __init m532x_fec_init(void)
 {
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	MCF_INTC0_ICR36 = 0x2;
-	MCF_INTC0_ICR40 = 0x2;
-	MCF_INTC0_ICR42 = 0x2;
-
-	MCF_INTC0_IMRH &= ~(MCF_INTC_IMRH_INT_MASK36 |
-		MCF_INTC_IMRH_INT_MASK40 | MCF_INTC_IMRH_INT_MASK42);
-
 	/* Set multi-function pins to ethernet mode for fec0 */
 	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
 		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
@@ -142,26 +121,6 @@ static void __init m532x_fec_init(void)
 
 /***************************************************************************/
 
-void mcf_settimericr(unsigned int timer, unsigned int level)
-{
-	volatile unsigned char *icrp;
-	unsigned int icr;
-	unsigned char irq;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  irq = 33; icr = MCFSIM_ICR_TIMER2; break;
-		default: irq = 32; icr = MCFSIM_ICR_TIMER1; break;
-		}
-		
-		icrp = (volatile unsigned char *) (icr);
-		*icrp = level;
-		mcf_enable_irq0(irq);
-	}
-}
-
-/***************************************************************************/
-
 static void m532x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -172,8 +131,6 @@ static void m532x_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if !defined(CONFIG_BOOTPARAM)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0x4000, 4);
@@ -185,10 +142,6 @@ void __init config_BSP(char *commandp, int size)
 	}
 #endif
 
-	mcf_timervector = 64+32;
-	mcf_profilevector = 64+33;
-	mach_reset = m532x_cpu_reset;
-
 #ifdef CONFIG_BDM_DISABLE
 	/*
 	 * Disable the BDM clocking.  This also turns off most of the rest of
@@ -438,8 +391,8 @@ void gpio_init(void)
 	/* Initialize TIN3 as a GPIO output to enable the write
 	   half of the latch */
 	MCF_GPIO_PAR_TIMER = 0x00;
-	MCF_GPIO_PDDR_TIMER = 0x08;
-	MCF_GPIO_PCLRR_TIMER = 0x0;
+	__raw_writeb(0x08, MCFGPIO_PDDR_TIMER);
+	__raw_writeb(0x00, MCFGPIO_PCLRR_TIMER);
 
 }
 
diff --git a/arch/m68knommu/platform/532x/gpio.c b/arch/m68knommu/platform/532x/gpio.c
new file mode 100644
index 000000000000..184b77382c3d
--- /dev/null
+++ b/arch/m68knommu/platform/532x/gpio.c
@@ -0,0 +1,337 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECH,
+		.podr				= MCFGPIO_PODR_FECH,
+		.ppdr				= MCFGPIO_PPDSDR_FECH,
+		.setr				= MCFGPIO_PPDSDR_FECH,
+		.clrr				= MCFGPIO_PCLRR_FECH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECL,
+		.podr				= MCFGPIO_PODR_FECL,
+		.ppdr				= MCFGPIO_PPDSDR_FECL,
+		.setr				= MCFGPIO_PPDSDR_FECL,
+		.clrr				= MCFGPIO_PCLRR_FECL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SSI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_SSI,
+		.podr				= MCFGPIO_PODR_SSI,
+		.ppdr				= MCFGPIO_PPDSDR_SSI,
+		.setr				= MCFGPIO_PPDSDR_SSI,
+		.clrr				= MCFGPIO_PCLRR_SSI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BE",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BE,
+		.podr				= MCFGPIO_PODR_BE,
+		.ppdr				= MCFGPIO_PPDSDR_BE,
+		.setr				= MCFGPIO_PPDSDR_BE,
+		.clrr				= MCFGPIO_PCLRR_BE,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 49,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "PWM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 58,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_PWM,
+		.podr				= MCFGPIO_PODR_PWM,
+		.ppdr				= MCFGPIO_PPDSDR_PWM,
+		.setr				= MCFGPIO_PPDSDR_PWM,
+		.clrr				= MCFGPIO_PCLRR_PWM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UART",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UART,
+		.podr				= MCFGPIO_PODR_UART,
+		.ppdr				= MCFGPIO_PPDSDR_UART,
+		.setr				= MCFGPIO_PPDSDR_UART,
+		.clrr				= MCFGPIO_PCLRR_UART,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDDATAH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDDATAH,
+		.podr				= MCFGPIO_PODR_LCDDATAH,
+		.ppdr				= MCFGPIO_PPDSDR_LCDDATAH,
+		.setr				= MCFGPIO_PPDSDR_LCDDATAH,
+		.clrr				= MCFGPIO_PCLRR_LCDDATAH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDDATAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDDATAM,
+		.podr				= MCFGPIO_PODR_LCDDATAM,
+		.ppdr				= MCFGPIO_PPDSDR_LCDDATAM,
+		.setr				= MCFGPIO_PPDSDR_LCDDATAM,
+		.clrr				= MCFGPIO_PCLRR_LCDDATAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDDATAL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 112,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDDATAL,
+		.podr				= MCFGPIO_PODR_LCDDATAL,
+		.ppdr				= MCFGPIO_PPDSDR_LCDDATAL,
+		.setr				= MCFGPIO_PPDSDR_LCDDATAL,
+		.clrr				= MCFGPIO_PCLRR_LCDDATAL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDCTLH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 120,
+			.ngpio			= 1,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDCTLH,
+		.podr				= MCFGPIO_PODR_LCDCTLH,
+		.ppdr				= MCFGPIO_PPDSDR_LCDCTLH,
+		.setr				= MCFGPIO_PPDSDR_LCDCTLH,
+		.clrr				= MCFGPIO_PCLRR_LCDCTLH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDCTLL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 128,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDCTLL,
+		.podr				= MCFGPIO_PODR_LCDCTLL,
+		.ppdr				= MCFGPIO_PPDSDR_LCDCTLL,
+		.setr				= MCFGPIO_PPDSDR_LCDCTLL,
+		.clrr				= MCFGPIO_PCLRR_LCDCTLL,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/5407/Makefile b/arch/m68knommu/platform/5407/Makefile
index e6035e7a2d3f..dee62c5dbaa6 100644
--- a/arch/m68knommu/platform/5407/Makefile
+++ b/arch/m68knommu/platform/5407/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
index b41d942bf8d0..70ea789a400c 100644
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -20,12 +20,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5407_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -55,11 +49,11 @@ static void __init m5407_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -74,35 +68,19 @@ static void __init m5407_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		vec = 0x1 << (vec - 24);
-		*(mbar + MCFSIM_AVR) |= vec;
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5407_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
 }
 
 /***************************************************************************/
@@ -120,23 +98,21 @@ void m5407_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
-#if defined(CONFIG_CLEOPATRA)
-	/* Different timer setup - to prevent device clash */
-	mcf_timervector = 30;
-	mcf_profilevector = 31;
-	mcf_timerlevel = 6;
-#endif
-
 	mach_reset = m5407_cpu_reset;
+	m5407_timers_init();
+	m5407_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5407_uarts_init();
 	platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5407/gpio.c b/arch/m68knommu/platform/5407/gpio.c
new file mode 100644
index 000000000000..8da5880e4066
--- /dev/null
+++ b/arch/m68knommu/platform/5407/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c
index 72e56d554f4f..b91ee85d4b5d 100644
--- a/arch/m68knommu/platform/68328/ints.c
+++ b/arch/m68knommu/platform/68328/ints.c
@@ -73,34 +73,6 @@ extern e_vector *_ramvec;
 /* The number of spurious interrupts */
 volatile unsigned int num_spurious;
 
-/*
- * This function should be called during kernel startup to initialize
- * the machine vector table.
- */
-void __init init_vectors(void)
-{
-	int i;
-
-	/* set up the vectors */
-	for (i = 72; i < 256; ++i)
-		_ramvec[i] = (e_vector) bad_interrupt;
-
-	_ramvec[32] = system_call;
-
-	_ramvec[65] = (e_vector) inthandler1;
-	_ramvec[66] = (e_vector) inthandler2;
-	_ramvec[67] = (e_vector) inthandler3;
-	_ramvec[68] = (e_vector) inthandler4;
-	_ramvec[69] = (e_vector) inthandler5;
-	_ramvec[70] = (e_vector) inthandler6;
-	_ramvec[71] = (e_vector) inthandler7;
- 
-	IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */
-
-	/* turn off all interrupts */
-	IMR = ~0;
-}
-
 /* The 68k family did not have a good way to determine the source
  * of interrupts until later in the family.  The EC000 core does
  * not provide the vector number on the stack, we vector everything
@@ -163,18 +135,54 @@ void process_int(int vec, struct pt_regs *fp)
 	}
 }
 
-void enable_vector(unsigned int irq)
+static void intc_irq_unmask(unsigned int irq)
 {
 	IMR &= ~(1<<irq);
 }
 
-void disable_vector(unsigned int irq)
+static void intc_irq_mask(unsigned int irq)
 {
 	IMR |= (1<<irq);
 }
 
-void ack_vector(unsigned int irq)
+static struct irq_chip intc_irq_chip = {
+	.name		= "M68K-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+};
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the machine vector table.
+ */
+void __init init_IRQ(void)
 {
-	/* Nothing needed */
+	int i;
+
+	/* set up the vectors */
+	for (i = 72; i < 256; ++i)
+		_ramvec[i] = (e_vector) bad_interrupt;
+
+	_ramvec[32] = system_call;
+
+	_ramvec[65] = (e_vector) inthandler1;
+	_ramvec[66] = (e_vector) inthandler2;
+	_ramvec[67] = (e_vector) inthandler3;
+	_ramvec[68] = (e_vector) inthandler4;
+	_ramvec[69] = (e_vector) inthandler5;
+	_ramvec[70] = (e_vector) inthandler6;
+	_ramvec[71] = (e_vector) inthandler7;
+
+	IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */
+
+	/* turn off all interrupts */
+	IMR = ~0;
+
+	for (i = 0; (i < NR_IRQS); i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+		irq_desc[i].chip = &intc_irq_chip;
+	}
 }
 
diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index c36781157e09..1143f77caca4 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -37,11 +37,33 @@ extern void *_ramvec[];
 /* The number of spurious interrupts */
 volatile unsigned int num_spurious;
 
+static void intc_irq_unmask(unsigned int irq)
+{
+	pquicc->intr_cimr |= (1 << irq);
+}
+
+static void intc_irq_mask(unsigned int irq)
+{
+	pquicc->intr_cimr &= ~(1 << irq);
+}
+
+static void intc_irq_ack(unsigned int irq)
+{
+	pquicc->intr_cisr = (1 << irq);
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "M68K-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.ack		= intc_irq_ack,
+};
+
 /*
  * This function should be called during kernel startup to initialize
  * the vector table.
  */
-void init_vectors(void)
+void init_IRQ(void)
 {
 	int i;
 	int vba = (CPM_VECTOR_BASE<<4);
@@ -109,20 +131,12 @@ void init_vectors(void)
 
 	/* turn off all CPM interrupts */
 	pquicc->intr_cimr = 0x00000000;
-}
-
-void enable_vector(unsigned int irq)
-{
-	pquicc->intr_cimr |= (1 << irq);
-}
 
-void disable_vector(unsigned int irq)
-{
-	pquicc->intr_cimr &= ~(1 << irq);
-}
-
-void ack_vector(unsigned int irq)
-{
-	pquicc->intr_cisr = (1 << irq);
+	for (i = 0; (i < NR_IRQS); i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+		irq_desc[i].chip = &intc_irq_chip;
+	}
 }
 
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 1bcb9372353f..f72a0e5d9996 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -15,16 +15,17 @@
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-$(CONFIG_COLDFIRE)	+= clk.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206)	+= timers.o
-obj-$(CONFIG_M5206e)	+= timers.o
-obj-$(CONFIG_M520x)	+= pit.o
-obj-$(CONFIG_M523x)	+= pit.o dma_timer.o
-obj-$(CONFIG_M5249)	+= timers.o
-obj-$(CONFIG_M527x)	+= pit.o
+obj-$(CONFIG_M5206)	+= timers.o intc.o
+obj-$(CONFIG_M5206e)	+= timers.o intc.o
+obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o
+obj-$(CONFIG_M5249)	+= timers.o intc.o
+obj-$(CONFIG_M527x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5272)	+= timers.o
-obj-$(CONFIG_M528x)	+= pit.o
-obj-$(CONFIG_M5307)	+= timers.o
-obj-$(CONFIG_M532x)	+= timers.o
-obj-$(CONFIG_M5407)	+= timers.o
+obj-$(CONFIG_M528x)	+= pit.o intc-2.o
+obj-$(CONFIG_M5307)	+= timers.o intc.o
+obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
+obj-$(CONFIG_M5407)	+= timers.o intc.o
 
+obj-y			+= pinmux.o gpio.o
 extra-y := head.o
diff --git a/arch/m68knommu/platform/coldfire/gpio.c b/arch/m68knommu/platform/coldfire/gpio.c
new file mode 100644
index 000000000000..ff0045793450
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/gpio.c
@@ -0,0 +1,127 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/gpio.h>
+#include <asm/pinmux.h>
+#include <asm/mcfgpio.h>
+
+#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
+
+int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE dir;
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	local_irq_save(flags);
+	dir = mcfgpio_read(mcf_chip->pddr);
+	dir &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(dir, mcf_chip->pddr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
+}
+
+int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE data;
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	local_irq_save(flags);
+	/* write the value to the output latch */
+	data = mcfgpio_read(mcf_chip->podr);
+	if (value)
+		data |= mcfgpio_bit(chip->base + offset);
+	else
+		data &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->podr);
+
+	/* now set the direction to output */
+	data = mcfgpio_read(mcf_chip->pddr);
+	data |= mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->pddr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	unsigned long flags;
+	MCFGPIO_PORTTYPE data;
+
+	local_irq_save(flags);
+	data = mcfgpio_read(mcf_chip->podr);
+	if (value)
+		data |= mcfgpio_bit(chip->base + offset);
+	else
+		data &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->podr);
+	local_irq_restore(flags);
+}
+
+void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	if (value)
+		mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
+	else
+		mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
+}
+
+int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	return mcf_chip->gpio_to_pinmux ?
+		mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
+}
+
+void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	mcf_gpio_direction_input(chip, offset);
+
+	if (mcf_chip->gpio_to_pinmux)
+		mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
+}
+
+struct sysdev_class mcf_gpio_sysclass = {
+	.name	= "gpio",
+};
+
+static int __init mcf_gpio_sysinit(void)
+{
+	return sysdev_class_register(&mcf_gpio_sysclass);
+}
+
+core_initcall(mcf_gpio_sysinit);
diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c
new file mode 100644
index 000000000000..5598c8b8661f
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/intc-2.c
@@ -0,0 +1,93 @@
+/*
+ * intc-1.c
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ *	Each vector needs a unique priority and level asscoiated with it.
+ *	We don't really care so much what they are, we don't rely on the
+ *	tranditional priority interrupt scheme of the m68k/ColdFire.
+ */
+static u8 intc_intpri = 0x36;
+
+static void intc_irq_mask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+		unsigned long imraddr;
+		u32 val, imrbit;
+
+		irq -= MCFINT_VECBASE;
+		imraddr = MCF_IPSBAR;
+		imraddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+		imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
+		imrbit = 0x1 << (irq & 0x1f);
+
+		val = __raw_readl(imraddr);
+		__raw_writel(val | imrbit, imraddr);
+	}
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+		unsigned long intaddr, imraddr, icraddr;
+		u32 val, imrbit;
+
+		irq -= MCFINT_VECBASE;
+		intaddr = MCF_IPSBAR;
+		intaddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+		imraddr = intaddr + ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
+		icraddr = intaddr + MCFINTC_ICR0 + (irq & 0x3f);
+		imrbit = 0x1 << (irq & 0x1f);
+
+		/* Don't set the "maskall" bit! */
+		if ((irq & 0x20) == 0)
+			imrbit |= 0x1;
+
+		if (__raw_readb(icraddr) == 0)
+			__raw_writeb(intc_intpri--, icraddr);
+
+		val = __raw_readl(imraddr);
+		__raw_writel(val & ~imrbit, imraddr);
+	}
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	/* Mask all interrupt sources */
+	__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+	__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+	}
+}
+
diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c
new file mode 100644
index 000000000000..1b01e79c2f63
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/intc-simr.c
@@ -0,0 +1,78 @@
+/*
+ * intc-simr.c
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+static void intc_irq_mask(unsigned int irq)
+{
+	if (irq >= MCFINT_VECBASE) {
+		if (irq < MCFINT_VECBASE + 64)
+			__raw_writeb(irq - MCFINT_VECBASE, MCFINTC0_SIMR);
+		else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_SIMR)
+			__raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_SIMR);
+	}
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	if (irq >= MCFINT_VECBASE) {
+		if (irq < MCFINT_VECBASE + 64)
+			__raw_writeb(irq - MCFINT_VECBASE, MCFINTC0_CIMR);
+		else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_CIMR)
+			__raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_CIMR);
+	}
+}
+
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+	if (irq >= MCFINT_VECBASE) {
+		if (irq < MCFINT_VECBASE + 64)
+			__raw_writeb(5, MCFINTC0_ICR0 + irq - MCFINT_VECBASE);
+		else if ((irq < MCFINT_VECBASE) && MCFINTC1_ICR0)
+			__raw_writeb(5, MCFINTC1_ICR0 + irq - MCFINT_VECBASE - 64);
+	}
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	/* Mask all interrupt sources */
+	__raw_writeb(0xff, MCFINTC0_SIMR);
+	if (MCFINTC1_SIMR)
+		__raw_writeb(0xff, MCFINTC1_SIMR);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+		intc_irq_set_type(irq, 0);
+	}
+}
+
diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
new file mode 100644
index 000000000000..a4560c86db71
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -0,0 +1,153 @@
+/*
+ * intc.c  -- support for the old ColdFire interrupt controller
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The mapping of irq number to a mask register bit is not one-to-one.
+ * The irq numbers are either based on "level" of interrupt or fixed
+ * for an autovector-able interrupt. So we keep a local data structure
+ * that maps from irq to mask register. Not all interrupts will have
+ * an IMR bit.
+ */
+unsigned char mcf_irq2imr[NR_IRQS];
+
+/*
+ * Define the miniumun and maximum external interrupt numbers.
+ * This is also used as the "level" interrupt numbers.
+ */
+#define	EIRQ1	25
+#define	EIRQ7	31
+
+/*
+ * In the early version 2 core ColdFire parts the IMR register was 16 bits
+ * in size. Version 3 (and later version 2) core parts have a 32 bit
+ * sized IMR register. Provide some size independant methods to access the
+ * IMR register.
+ */
+#ifdef MCFSIM_IMR_IS_16BITS
+
+void mcf_setimr(int index)
+{
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	__raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	__raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	imr |= mask;
+	__raw_writew(imr, MCF_MBAR + MCFSIM_IMR);
+}
+
+#else
+
+void mcf_setimr(int index)
+{
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	__raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	__raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	imr |= mask;
+	__raw_writel(imr, MCF_MBAR + MCFSIM_IMR);
+}
+
+#endif
+
+/*
+ * Interrupts can be "vectored" on the ColdFire cores that support this old
+ * interrupt controller. That is, the device raising the interrupt can also
+ * supply the vector number to interrupt through. The AVR register of the
+ * interrupt controller enables or disables this for each external interrupt,
+ * so provide generic support for this. Setting this up is out-of-band for
+ * the interrupt system API's, and needs to be done by the driver that
+ * supports this device. Very few devices actually use this.
+ */
+void mcf_autovector(int irq)
+{
+#ifdef MCFSIM_AVR
+	if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
+		u8 avec;
+		avec = __raw_readb(MCF_MBAR + MCFSIM_AVR);
+		avec |= (0x1 << (irq - EIRQ1 + 1));
+		__raw_writeb(avec, MCF_MBAR + MCFSIM_AVR);
+	}
+#endif
+}
+
+static void intc_irq_mask(unsigned int irq)
+{
+	if (mcf_irq2imr[irq])
+		mcf_setimr(mcf_irq2imr[irq]);
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	if (mcf_irq2imr[irq])
+		mcf_clrimr(mcf_irq2imr[irq]);
+}
+
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+	mcf_maskimr(0xffffffff);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+		intc_irq_set_type(irq, 0);
+	}
+}
+
diff --git a/arch/m68knommu/platform/coldfire/pinmux.c b/arch/m68knommu/platform/coldfire/pinmux.c
new file mode 100644
index 000000000000..8c62b825939f
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/pinmux.c
@@ -0,0 +1,28 @@
+/*
+ * Coldfire generic GPIO pinmux support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/pinmux.h>
+
+int mcf_pinmux_request(unsigned pinmux, unsigned func)
+{
+	return 0;
+}
+
+void mcf_pinmux_release(unsigned pinmux, unsigned func)
+{
+}
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 61b96211f8ff..d8720ee34510 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -32,7 +32,6 @@
  */
 #define	FREQ	((MCF_CLK / 2) / 64)
 #define	TA(a)	(MCF_IPSBAR + MCFPIT_BASE1 + (a))
-#define	INTC0	(MCF_IPSBAR + MCFICM_INTC0)
 #define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
 
 static u32 pit_cnt;
@@ -154,8 +153,6 @@ static struct clocksource pit_clk = {
 
 void hw_timer_init(void)
 {
-	u32 imr;
-
 	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
 	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
 	cf_pit_clockevent.max_delta_ns =
@@ -166,11 +163,6 @@ void hw_timer_init(void)
 
 	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
-	__raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1);
-	imr = __raw_readl(INTC0 + MCFPIT_IMR);
-	imr &= ~MCFPIT_IMR_IBIT;
-	__raw_writel(imr, INTC0 + MCFPIT_IMR);
-
 	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
 	clocksource_register(&pit_clk);
 }
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index 1ba8a3731653..2304d736c701 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -31,19 +31,9 @@
 #define	TA(a)	(MCF_MBAR + MCFTIMER_BASE1 + (a))
 
 /*
- *	Default the timer and vector to use for ColdFire. Some ColdFire
- *	CPU's and some boards may want different. Their sub-architecture
- *	startup code (in config.c) can change these if they want.
- */
-unsigned int	mcf_timervector = 29;
-unsigned int	mcf_profilevector = 31;
-unsigned int	mcf_timerlevel = 5;
-
-/*
  *	These provide the underlying interrupt vector support.
  *	Unfortunately it is a little different on each ColdFire.
  */
-extern void mcf_settimericr(int timer, int level);
 void coldfire_profile_init(void);
 
 #if defined(CONFIG_M532x)
@@ -107,8 +97,6 @@ static struct clocksource mcftmr_clk = {
 
 void hw_timer_init(void)
 {
-	setup_irq(mcf_timervector, &mcftmr_timer_irq);
-
 	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
 	mcftmr_cycles_per_jiffy = FREQ / HZ;
 	/*
@@ -124,7 +112,7 @@ void hw_timer_init(void)
 	mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
 	clocksource_register(&mcftmr_clk);
 
-	mcf_settimericr(1, mcf_timerlevel);
+	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
 
 #ifdef CONFIG_HIGHPROFILE
 	coldfire_profile_init();
@@ -171,8 +159,6 @@ void coldfire_profile_init(void)
 	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
 	       PROFILEHZ);
 
-	setup_irq(mcf_profilevector, &coldfire_profile_irq);
-
 	/* Set up TIMER 2 as high speed profile clock */
 	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
 
@@ -180,7 +166,7 @@ void coldfire_profile_init(void)
 	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
 
-	mcf_settimericr(2, 7);
+	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/vectors.c b/arch/m68knommu/platform/coldfire/vectors.c
index bdca0297fa9a..a21d3f870b7a 100644
--- a/arch/m68knommu/platform/coldfire/vectors.c
+++ b/arch/m68knommu/platform/coldfire/vectors.c
@@ -1,7 +1,7 @@
 /***************************************************************************/
 
 /*
- *	linux/arch/m68knommu/platform/5307/vectors.c
+ *	linux/arch/m68knommu/platform/coldfire/vectors.c
  *
  *	Copyright (C) 1999-2007, Greg Ungerer <gerg@snapgear.com>
  */
@@ -15,7 +15,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
 #include <asm/mcfwdebug.h>
 
 /***************************************************************************/
@@ -79,20 +78,3 @@ void __init init_vectors(void)
 }
 
 /***************************************************************************/
-
-void enable_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-void disable_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-void ack_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-/***************************************************************************/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3ca0fe1a9123..705a7a9170f3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -6,7 +6,7 @@ config MIPS
 	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
-	select RTC_LIB
+	select RTC_LIB if !LEMOTE_FULOONG2E
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
@@ -80,6 +80,21 @@ config BCM47XX
 	help
 	 Support for BCM47XX based boards
 
+config BCM63XX
+	bool "Broadcom BCM63XX based boards"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select SWAP_IO_SPACE
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	 Support for BCM63XX based boards
+
 config MIPS_COBALT
 	bool "Cobalt Server"
 	select CEVT_R4K
@@ -174,30 +189,15 @@ config LASAT
 	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config LEMOTE_FULONG
-	bool "Lemote Fulong mini-PC"
-	select ARCH_SPARSEMEM_ENABLE
-	select CEVT_R4K
-	select CSRC_R4K
-	select SYS_HAS_CPU_LOONGSON2
-	select DMA_NONCOHERENT
-	select BOOT_ELF32
-	select BOARD_SCACHE
-	select HAVE_STD_PC_SERIAL_PORT
-	select HW_HAS_PCI
-	select I8259
-	select ISA
-	select IRQ_CPU
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_HAS_EARLY_PRINTK
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select CPU_HAS_WB
+config MACH_LOONGSON
+	bool "Loongson family of machines"
 	help
-	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
-	  an FPGA northbridge
+	  This enables the support of Loongson family of machines.
+
+	  Loongson is a family of general-purpose MIPS-compatible CPUs.
+	  developed at Institute of Computing Technology (ICT),
+	  Chinese Academy of Sciences (CAS) in the People's Republic
+	  of China. The chief architect is Professor Weiwu Hu.
 
 config MIPS_MALTA
 	bool "MIPS Malta board"
@@ -660,6 +660,7 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
+source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -668,6 +669,7 @@ source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
+source "arch/mips/loongson/Kconfig"
 
 endmenu
 
@@ -1044,12 +1046,10 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
-config CPU_LOONGSON2
-	bool "Loongson 2"
-	depends on SYS_HAS_CPU_LOONGSON2
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON2E
+	bool "Loongson 2E"
+	depends on SYS_HAS_CPU_LOONGSON2E
+	select CPU_LOONGSON2
 	help
 	  The Loongson 2E processor implements the MIPS III instruction set
 	  with many extensions.
@@ -1057,7 +1057,6 @@ config CPU_LOONGSON2
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1075,7 +1074,6 @@ config CPU_MIPS32_R1
 config CPU_MIPS32_R2
 	bool "MIPS32 Release 2"
 	depends on SYS_HAS_CPU_MIPS32_R2
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1089,7 +1087,6 @@ config CPU_MIPS32_R2
 config CPU_MIPS64_R1
 	bool "MIPS64 Release 1"
 	depends on SYS_HAS_CPU_MIPS64_R1
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1109,7 +1106,6 @@ config CPU_MIPS64_R1
 config CPU_MIPS64_R2
 	bool "MIPS64 Release 2"
 	depends on SYS_HAS_CPU_MIPS64_R2
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1155,7 +1151,6 @@ config CPU_VR41XX
 config CPU_R4300
 	bool "R4300"
 	depends on SYS_HAS_CPU_R4300
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1164,7 +1159,6 @@ config CPU_R4300
 config CPU_R4X00
 	bool "R4x00"
 	depends on SYS_HAS_CPU_R4X00
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1174,7 +1168,6 @@ config CPU_R4X00
 config CPU_TX49XX
 	bool "R49XX"
 	depends on SYS_HAS_CPU_TX49XX
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1182,7 +1175,6 @@ config CPU_TX49XX
 config CPU_R5000
 	bool "R5000"
 	depends on SYS_HAS_CPU_R5000
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1191,14 +1183,12 @@ config CPU_R5000
 config CPU_R5432
 	bool "R5432"
 	depends on SYS_HAS_CPU_R5432
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R5500
 	bool "R5500"
 	depends on SYS_HAS_CPU_R5500
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HUGEPAGES
@@ -1209,7 +1199,6 @@ config CPU_R5500
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
-	select CPU_HAS_LLSC
 	depends on SYS_HAS_CPU_R6000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
@@ -1219,7 +1208,6 @@ config CPU_R6000
 config CPU_NEVADA
 	bool "RM52xx"
 	depends on SYS_HAS_CPU_NEVADA
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1229,7 +1217,6 @@ config CPU_R8000
 	bool "R8000"
 	depends on EXPERIMENTAL
 	depends on SYS_HAS_CPU_R8000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1239,7 +1226,6 @@ config CPU_R8000
 config CPU_R10000
 	bool "R10000"
 	depends on SYS_HAS_CPU_R10000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1250,7 +1236,6 @@ config CPU_R10000
 config CPU_RM7000
 	bool "RM7000"
 	depends on SYS_HAS_CPU_RM7000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1259,7 +1244,6 @@ config CPU_RM7000
 config CPU_RM9000
 	bool "RM9000"
 	depends on SYS_HAS_CPU_RM9000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1269,7 +1253,6 @@ config CPU_RM9000
 config CPU_SB1
 	bool "SB1"
 	depends on SYS_HAS_CPU_SB1
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1296,7 +1279,13 @@ config CPU_CAVIUM_OCTEON
 
 endchoice
 
-config SYS_HAS_CPU_LOONGSON2
+config CPU_LOONGSON2
+	bool
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+
+config SYS_HAS_CPU_LOONGSON2E
 	bool
 
 config SYS_HAS_CPU_MIPS32_R1
@@ -1683,9 +1672,6 @@ config SB1_PASS_2_1_WORKAROUNDS
 config 64BIT_PHYS_ADDR
 	bool
 
-config CPU_HAS_LLSC
-	bool
-
 config CPU_HAS_SMARTMIPS
 	depends on SYS_SUPPORTS_SMARTMIPS
 	bool "Support for the SmartMIPS ASE"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 861da514a468..c825b14b4ed0 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -120,7 +120,11 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2)	+= -march=r4600 -Wa,--trap
+# only gcc >= 4.4 have the loongson-specific support
+cflags-$(CONFIG_CPU_LOONGSON2)	+= -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+	$(call cc-option,-march=loongson2e,-march=r4600)
+
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
@@ -314,11 +318,12 @@ cflags-$(CONFIG_WR_PPMC)		+= -I$(srctree)/arch/mips/include/asm/mach-wrppmc
 load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 
 #
-# lemote fulong mini-PC board
+# Loongson family
 #
-core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/
-load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
-cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote
+core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
+cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
+                    -mno-branch-likely
+load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
 
 #
 # MIPS Malta board
@@ -560,6 +565,13 @@ cflags-$(CONFIG_BCM47XX)	+= -I$(srctree)/arch/mips/include/asm/mach-bcm47xx
 load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
 
 #
+# Broadcom BCM63XX boards
+#
+core-$(CONFIG_BCM63XX)		+= arch/mips/bcm63xx/
+cflags-$(CONFIG_BCM63XX)	+= -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
+load-$(CONFIG_BCM63XX)		:= 0xffffffff80010000
+
+#
 # SNI RM
 #
 core-$(CONFIG_SNI_RM)		+= arch/mips/sni/
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 3f036b3d400e..6184baa56786 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -27,6 +27,7 @@
 
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/jiffies.h>
 #include <linux/module.h>
 #include <linux/pm.h>
 
@@ -53,6 +54,9 @@ void __init plat_mem_setup(void)
 	printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
 	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
 
+	/* this is faster than wasting cycles trying to approximate it */
+	preset_lpj = (est_freq >> 1) / HZ;
+
 	_machine_restart = au1000_restart;
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 33fbae79af5e..f34ff8601942 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -36,14 +36,13 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 
+#include <asm/processor.h>
 #include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>
 
 /* 32kHz clock enabled and detected */
 #define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
 
-extern int allow_au1k_wait; /* default off for CP0 Counter */
-
 static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
@@ -153,13 +152,17 @@ void __init plat_time_init(void)
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 
-	/* can now use 'wait' */
-	allow_au1k_wait = 1;
 	return;
 
 cntr_err:
-	/* counters unusable, use C0 counter */
+	/*
+	 * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
+	 * function is called.  Because the Alchemy counters are unusable
+	 * the C0 timekeeping code is installed and use of the 'wait'
+	 * instruction must be prohibited, which is done most easily by
+	 * assigning NULL to cpu_wait.
+	 */
+	cpu_wait = NULL;
 	r4k_clockevent_init();
 	init_r4k_clocksource();
-	allow_au1k_wait = 0;
 }
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index cf50fa29b198..e2278c04459d 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -417,6 +417,20 @@ static struct platform_device ar7_udc = {
 	.num_resources = ARRAY_SIZE(usb_res),
 };
 
+static struct resource ar7_wdt_res = {
+	.name = "regs",
+	.start = -1, /* Filled at runtime */
+	.end = -1, /* Filled at runtime */
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ar7_wdt = {
+	.id = -1,
+	.name  = "ar7_wdt",
+	.resource = &ar7_wdt_res,
+	.num_resources = 1,
+};
+
 static inline unsigned char char2hex(char h)
 {
 	switch (h) {
@@ -487,6 +501,7 @@ static void __init detect_leds(void)
 
 static int __init ar7_register_devices(void)
 {
+	u16 chip_id;
 	int res;
 #ifdef CONFIG_SERIAL_8250
 	static struct uart_port uart_port[2];
@@ -565,6 +580,23 @@ static int __init ar7_register_devices(void)
 
 	res = platform_device_register(&ar7_udc);
 
+	chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		ar7_wdt_res.start = AR7_REGS_WDT;
+		break;
+	case AR7_CHIP_7300:
+		ar7_wdt_res.start = UR8_REGS_WDT;
+		break;
+	default:
+		break;
+	}
+
+	ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
+
+	res = platform_device_register(&ar7_wdt);
+
 	return res;
 }
 arch_initcall(ar7_register_devices);
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
new file mode 100644
index 000000000000..fb177d6df066
--- /dev/null
+++ b/arch/mips/bcm63xx/Kconfig
@@ -0,0 +1,25 @@
+menu "CPU support"
+	depends on BCM63XX
+
+config BCM63XX_CPU_6338
+	bool "support 6338 CPU"
+	select HW_HAS_PCI
+	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
+
+config BCM63XX_CPU_6345
+	bool "support 6345 CPU"
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
+
+config BCM63XX_CPU_6348
+	bool "support 6348 CPU"
+	select HW_HAS_PCI
+
+config BCM63XX_CPU_6358
+	bool "support 6358 CPU"
+	select HW_HAS_PCI
+endmenu
+
+source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
new file mode 100644
index 000000000000..aaa585cf26e3
--- /dev/null
+++ b/arch/mips/bcm63xx/Makefile
@@ -0,0 +1,7 @@
+obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+		   dev-dsp.o dev-enet.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+
+obj-y		+= boards/
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig
new file mode 100644
index 000000000000..c6aed33d893e
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/Kconfig
@@ -0,0 +1,11 @@
+choice
+	prompt "Board support"
+	depends on BCM63XX
+	default BOARD_BCM963XX
+
+config BOARD_BCM963XX
+       bool "Generic Broadcom 963xx boards"
+	select SSB
+       help
+
+endchoice
diff --git a/arch/mips/bcm63xx/boards/Makefile b/arch/mips/bcm63xx/boards/Makefile
new file mode 100644
index 000000000000..e5cc86dc1da8
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
new file mode 100644
index 000000000000..fd77f548207a
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -0,0 +1,837 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ssb/ssb.h>
+#include <asm/addrspace.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_dev_pci.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+#include <board_bcm963xx.h>
+
+#define PFX	"board_bcm963xx: "
+
+static struct bcm963xx_nvram nvram;
+static unsigned int mac_addr_used;
+static struct board_info board;
+
+/*
+ * known 6338 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6338
+static struct board_info __initdata board_96338gw = {
+	.name				= "96338GW",
+	.expected_cpu_id		= 0x6338,
+
+	.has_enet0			= 1,
+	.enet0 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ses",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		}
+	},
+};
+
+static struct board_info __initdata board_96338w = {
+	.name				= "96338W",
+	.expected_cpu_id		= 0x6338,
+
+	.has_enet0			= 1,
+	.enet0 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ses",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+#endif
+
+/*
+ * known 6345 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6345
+static struct board_info __initdata board_96345gw2 = {
+	.name				= "96345GW2",
+	.expected_cpu_id		= 0x6345,
+};
+#endif
+
+/*
+ * known 6348 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6348
+static struct board_info __initdata board_96348r = {
+	.name				= "96348R",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw_10 = {
+	.name				= "96348GW-10",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+	.has_pccard			= 1,
+	.has_ehci0			= 1,
+
+	.has_dsp			= 1,
+	.dsp = {
+		.gpio_rst		= 6,
+		.gpio_int		= 34,
+		.cs			= 2,
+		.ext_irq		= 2,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw_11 = {
+	.name				= "96348GW-11",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw = {
+	.name				= "96348GW",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0 = 1,
+
+	.has_dsp			= 1,
+	.dsp = {
+		.gpio_rst		= 6,
+		.gpio_int		= 34,
+		.ext_irq		= 2,
+		.cs			= 2,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_FAST2404 = {
+        .name                           = "F@ST2404",
+        .expected_cpu_id                = 0x6348,
+
+        .has_enet0                      = 1,
+        .has_enet1                      = 1,
+        .has_pci                        = 1,
+
+        .enet0 = {
+                .has_phy                = 1,
+                .use_internal_phy       = 1,
+        },
+
+        .enet1 = {
+                .force_speed_100        = 1,
+                .force_duplex_full      = 1,
+        },
+
+
+        .has_ohci0 = 1,
+        .has_pccard = 1,
+        .has_ehci0 = 1,
+};
+
+static struct board_info __initdata board_DV201AMR = {
+	.name				= "DV201AMR",
+	.expected_cpu_id		= 0x6348,
+
+	.has_pci			= 1,
+	.has_ohci0			= 1,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+};
+
+static struct board_info __initdata board_96348gw_a = {
+	.name				= "96348GW-A",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0 = 1,
+};
+#endif
+
+/*
+ * known 6358 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6358
+static struct board_info __initdata board_96358vw = {
+	.name				= "96358VW",
+	.expected_cpu_id		= 0x6358,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 15,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 22,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 23,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 4,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 5,
+		},
+	},
+};
+
+static struct board_info __initdata board_96358vw2 = {
+	.name				= "96358VW2",
+	.expected_cpu_id		= 0x6358,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 22,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 23,
+		},
+		{
+			.name		= "power",
+			.gpio		= 5,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_AGPFS0 = {
+	.name                           = "AGPF-S0",
+	.expected_cpu_id                = 0x6358,
+
+	.has_enet0                      = 1,
+	.has_enet1                      = 1,
+	.has_pci                        = 1,
+
+	.enet0 = {
+		.has_phy                = 1,
+		.use_internal_phy       = 1,
+	},
+
+	.enet1 = {
+		.force_speed_100        = 1,
+		.force_duplex_full      = 1,
+	},
+
+	.has_ohci0 = 1,
+	.has_ehci0 = 1,
+};
+#endif
+
+/*
+ * all boards
+ */
+static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6338
+	&board_96338gw,
+	&board_96338w,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+	&board_96345gw2,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+	&board_96348r,
+	&board_96348gw,
+	&board_96348gw_10,
+	&board_96348gw_11,
+	&board_FAST2404,
+	&board_DV201AMR,
+	&board_96348gw_a,
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+	&board_96358vw,
+	&board_96358vw2,
+	&board_AGPFS0,
+#endif
+};
+
+/*
+ * early init callback, read nvram data from flash and checksum it
+ */
+void __init board_prom_init(void)
+{
+	unsigned int check_len, i;
+	u8 *boot_addr, *cfe, *p;
+	char cfe_version[32];
+	u32 val;
+
+	/* read base address of boot chip select (0)
+	 * 6345 does not have MPI but boots from standard
+	 * MIPS Flash address */
+	if (BCMCPU_IS_6345())
+		val = 0x1fc00000;
+	else {
+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+		val &= MPI_CSBASE_BASE_MASK;
+	}
+	boot_addr = (u8 *)KSEG1ADDR(val);
+
+	/* dump cfe version */
+	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+	if (!memcmp(cfe, "cfe-v", 5))
+		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+	else
+		strcpy(cfe_version, "unknown");
+	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+
+	/* extract nvram data */
+	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
+
+	/* check checksum before using data */
+	if (nvram.version <= 4)
+		check_len = offsetof(struct bcm963xx_nvram, checksum_old);
+	else
+		check_len = sizeof(nvram);
+	val = 0;
+	p = (u8 *)&nvram;
+	while (check_len--)
+		val += *p;
+	if (val) {
+		printk(KERN_ERR PFX "invalid nvram checksum\n");
+		return;
+	}
+
+	/* find board by name */
+	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
+			    sizeof(nvram.name)))
+			continue;
+		/* copy, board desc array is marked initdata */
+		memcpy(&board, bcm963xx_boards[i], sizeof(board));
+		break;
+	}
+
+	/* bail out if board is not found, will complain later */
+	if (!board.name[0]) {
+		char name[17];
+		memcpy(name, nvram.name, 16);
+		name[16] = 0;
+		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
+		       name);
+		return;
+	}
+
+	/* setup pin multiplexing depending on board enabled device,
+	 * this has to be done this early since PCI init is done
+	 * inside arch_initcall */
+	val = 0;
+
+#ifdef CONFIG_PCI
+	if (board.has_pci) {
+		bcm63xx_pci_enabled = 1;
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G2_PCI;
+	}
+#endif
+
+	if (board.has_pccard) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
+	}
+
+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	bcm_gpio_writel(val, GPIO_MODE_REG);
+}
+
+/*
+ * second stage init callback, good time to panic if we couldn't
+ * identify on which board we're running since early printk is working
+ */
+void __init board_setup(void)
+{
+	if (!board.name[0])
+		panic("unable to detect bcm963xx board");
+	printk(KERN_INFO PFX "board name: %s\n", board.name);
+
+	/* make sure we're running on expected cpu */
+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+		panic("unexpected CPU for bcm963xx board");
+}
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+	return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+	u8 *p;
+	int count;
+
+	if (mac_addr_used >= nvram.mac_addr_count) {
+		printk(KERN_ERR PFX "not enough mac address\n");
+		return -ENODEV;
+	}
+
+	memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+	p = mac + ETH_ALEN - 1;
+	count = mac_addr_used;
+
+	while (count--) {
+		do {
+			(*p)++;
+			if (*p != 0)
+				break;
+			p--;
+		} while (p != mac);
+	}
+
+	if (p == mac) {
+		printk(KERN_ERR PFX "unable to fetch mac address\n");
+		return -ENODEV;
+	}
+
+	mac_addr_used++;
+	return 0;
+}
+
+static struct mtd_partition mtd_partitions[] = {
+	{
+		.name		= "cfe",
+		.offset		= 0x0,
+		.size		= 0x40000,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width			= 2,
+	.nr_parts		= ARRAY_SIZE(mtd_partitions),
+	.parts			= mtd_partitions,
+};
+
+static struct resource mtd_resources[] = {
+	{
+		.start		= 0,	/* filled at runtime */
+		.end		= 0,	/* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device mtd_dev = {
+	.name			= "physmap-flash",
+	.resource		= mtd_resources,
+	.num_resources		= ARRAY_SIZE(mtd_resources),
+	.dev			= {
+		.platform_data	= &flash_data,
+	},
+};
+
+/*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+#ifdef CONFIG_SSB_PCIHOST
+static struct ssb_sprom bcm63xx_sprom = {
+	.revision		= 0x02,
+	.board_rev		= 0x17,
+	.country_code		= 0x0,
+	.ant_available_bg 	= 0x3,
+	.pa0b0			= 0x15ae,
+	.pa0b1			= 0xfa85,
+	.pa0b2			= 0xfe8d,
+	.pa1b0			= 0xffff,
+	.pa1b1			= 0xffff,
+	.pa1b2			= 0xffff,
+	.gpio0			= 0xff,
+	.gpio1			= 0xff,
+	.gpio2			= 0xff,
+	.gpio3			= 0xff,
+	.maxpwr_bg		= 0x004c,
+	.itssi_bg		= 0x00,
+	.boardflags_lo		= 0x2848,
+	.boardflags_hi		= 0x0000,
+};
+#endif
+
+static struct gpio_led_platform_data bcm63xx_led_data;
+
+static struct platform_device bcm63xx_gpio_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &bcm63xx_led_data,
+};
+
+/*
+ * third stage init callback, register all board devices.
+ */
+int __init board_register_devices(void)
+{
+	u32 val;
+
+	if (board.has_enet0 &&
+	    !board_get_mac_address(board.enet0.mac_addr))
+		bcm63xx_enet_register(0, &board.enet0);
+
+	if (board.has_enet1 &&
+	    !board_get_mac_address(board.enet1.mac_addr))
+		bcm63xx_enet_register(1, &board.enet1);
+
+	if (board.has_dsp)
+		bcm63xx_dsp_register(&board.dsp);
+
+	/* Generate MAC address for WLAN and
+	 * register our SPROM */
+#ifdef CONFIG_SSB_PCIHOST
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+			printk(KERN_ERR "failed to register fallback SPROM\n");
+	}
+#endif
+
+	/* read base address of boot chip select (0) */
+	if (BCMCPU_IS_6345())
+		val = 0x1fc00000;
+	else {
+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+		val &= MPI_CSBASE_BASE_MASK;
+	}
+	mtd_resources[0].start = val;
+	mtd_resources[0].end = 0x1FFFFFFF;
+
+	platform_device_register(&mtd_dev);
+
+	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+	bcm63xx_led_data.leds = board.leds;
+
+	platform_device_register(&bcm63xx_gpio_leds);
+
+	return 0;
+}
+
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
new file mode 100644
index 000000000000..2c68ee9ccee2
--- /dev/null
+++ b/arch/mips/bcm63xx/clk.c
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_clk.h>
+
+static DEFINE_MUTEX(clocks_mutex);
+
+
+static void clk_enable_unlocked(struct clk *clk)
+{
+	if (clk->set && (clk->usage++) == 0)
+		clk->set(clk, 1);
+}
+
+static void clk_disable_unlocked(struct clk *clk)
+{
+	if (clk->set && (--clk->usage) == 0)
+		clk->set(clk, 0);
+}
+
+static void bcm_hwclock_set(u32 mask, int enable)
+{
+	u32 reg;
+
+	reg = bcm_perf_readl(PERF_CKCTL_REG);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	bcm_perf_writel(reg, PERF_CKCTL_REG);
+}
+
+/*
+ * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+ */
+static void enet_misc_set(struct clk *clk, int enable)
+{
+	u32 mask;
+
+	if (BCMCPU_IS_6338())
+		mask = CKCTL_6338_ENET_EN;
+	else if (BCMCPU_IS_6345())
+		mask = CKCTL_6345_ENET_EN;
+	else if (BCMCPU_IS_6348())
+		mask = CKCTL_6348_ENET_EN;
+	else
+		/* BCMCPU_IS_6358 */
+		mask = CKCTL_6358_EMUSB_EN;
+	bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_enet_misc = {
+	.set	= enet_misc_set,
+};
+
+/*
+ * Ethernet MAC clocks: only revelant on 6358, silently enable misc
+ * clocks
+ */
+static void enetx_set(struct clk *clk, int enable)
+{
+	if (enable)
+		clk_enable_unlocked(&clk_enet_misc);
+	else
+		clk_disable_unlocked(&clk_enet_misc);
+
+	if (BCMCPU_IS_6358()) {
+		u32 mask;
+
+		if (clk->id == 0)
+			mask = CKCTL_6358_ENET0_EN;
+		else
+			mask = CKCTL_6358_ENET1_EN;
+		bcm_hwclock_set(mask, enable);
+	}
+}
+
+static struct clk clk_enet0 = {
+	.id	= 0,
+	.set	= enetx_set,
+};
+
+static struct clk clk_enet1 = {
+	.id	= 1,
+	.set	= enetx_set,
+};
+
+/*
+ * Ethernet PHY clock
+ */
+static void ephy_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6358())
+		return;
+	bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
+}
+
+
+static struct clk clk_ephy = {
+	.set	= ephy_set,
+};
+
+/*
+ * PCM clock
+ */
+static void pcm_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6358())
+		return;
+	bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
+}
+
+static struct clk clk_pcm = {
+	.set	= pcm_set,
+};
+
+/*
+ * USB host clock
+ */
+static void usbh_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6348())
+		return;
+	bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+}
+
+static struct clk clk_usbh = {
+	.set	= usbh_set,
+};
+
+/*
+ * SPI clock
+ */
+static void spi_set(struct clk *clk, int enable)
+{
+	u32 mask;
+
+	if (BCMCPU_IS_6338())
+		mask = CKCTL_6338_SPI_EN;
+	else if (BCMCPU_IS_6348())
+		mask = CKCTL_6348_SPI_EN;
+	else
+		/* BCMCPU_IS_6358 */
+		mask = CKCTL_6358_SPI_EN;
+	bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_spi = {
+	.set	= spi_set,
+};
+
+/*
+ * Internal peripheral clock
+ */
+static struct clk clk_periph = {
+	.rate	= (50 * 1000 * 1000),
+};
+
+
+/*
+ * Linux clock API implementation
+ */
+int clk_enable(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	clk_enable_unlocked(clk);
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	clk_disable_unlocked(clk);
+	mutex_unlock(&clocks_mutex);
+}
+
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "enet0"))
+		return &clk_enet0;
+	if (!strcmp(id, "enet1"))
+		return &clk_enet1;
+	if (!strcmp(id, "ephy"))
+		return &clk_ephy;
+	if (!strcmp(id, "usbh"))
+		return &clk_usbh;
+	if (!strcmp(id, "spi"))
+		return &clk_spi;
+	if (!strcmp(id, "periph"))
+		return &clk_periph;
+	if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
+		return &clk_pcm;
+	return ERR_PTR(-ENOENT);
+}
+
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
new file mode 100644
index 000000000000..6dc43f0483e8
--- /dev/null
+++ b/arch/mips/bcm63xx/cpu.c
@@ -0,0 +1,345 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_irq.h>
+
+const unsigned long *bcm63xx_regs_base;
+EXPORT_SYMBOL(bcm63xx_regs_base);
+
+const int *bcm63xx_irqs;
+EXPORT_SYMBOL(bcm63xx_irqs);
+
+static u16 bcm63xx_cpu_id;
+static u16 bcm63xx_cpu_rev;
+static unsigned int bcm63xx_cpu_freq;
+static unsigned int bcm63xx_memory_size;
+
+/*
+ * 6338 register sets and irqs
+ */
+static const unsigned long bcm96338_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6338_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6338_PERF_BASE,
+	[RSET_TIMER]		= BCM_6338_TIMER_BASE,
+	[RSET_WDT]		= BCM_6338_WDT_BASE,
+	[RSET_UART0]		= BCM_6338_UART0_BASE,
+	[RSET_GPIO]		= BCM_6338_GPIO_BASE,
+	[RSET_SPI]		= BCM_6338_SPI_BASE,
+	[RSET_OHCI0]		= BCM_6338_OHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6338_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6338_USBH_PRIV_BASE,
+	[RSET_UDC0]		= BCM_6338_UDC0_BASE,
+	[RSET_MPI]		= BCM_6338_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6338_PCMCIA_BASE,
+	[RSET_SDRAM]		= BCM_6338_SDRAM_BASE,
+	[RSET_DSL]		= BCM_6338_DSL_BASE,
+	[RSET_ENET0]		= BCM_6338_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6338_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6338_ENETDMA_BASE,
+	[RSET_MEMC]		= BCM_6338_MEMC_BASE,
+	[RSET_DDR]		= BCM_6338_DDR_BASE,
+};
+
+static const int bcm96338_irqs[] = {
+	[IRQ_TIMER]		= BCM_6338_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6338_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6338_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6338_ENET0_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6338_ENET_PHY_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6338_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6338_ENET0_TXDMA_IRQ,
+};
+
+/*
+ * 6345 register sets and irqs
+ */
+static const unsigned long bcm96345_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6345_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6345_PERF_BASE,
+	[RSET_TIMER]		= BCM_6345_TIMER_BASE,
+	[RSET_WDT]		= BCM_6345_WDT_BASE,
+	[RSET_UART0]		= BCM_6345_UART0_BASE,
+	[RSET_GPIO]		= BCM_6345_GPIO_BASE,
+	[RSET_SPI]		= BCM_6345_SPI_BASE,
+	[RSET_UDC0]		= BCM_6345_UDC0_BASE,
+	[RSET_OHCI0]		= BCM_6345_OHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6345_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6345_USBH_PRIV_BASE,
+	[RSET_MPI]		= BCM_6345_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6345_PCMCIA_BASE,
+	[RSET_DSL]		= BCM_6345_DSL_BASE,
+	[RSET_ENET0]		= BCM_6345_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6345_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6345_ENETDMA_BASE,
+	[RSET_EHCI0]		= BCM_6345_EHCI0_BASE,
+	[RSET_SDRAM]		= BCM_6345_SDRAM_BASE,
+	[RSET_MEMC]		= BCM_6345_MEMC_BASE,
+	[RSET_DDR]		= BCM_6345_DDR_BASE,
+};
+
+static const int bcm96345_irqs[] = {
+	[IRQ_TIMER]		= BCM_6345_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6345_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6345_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6345_ENET0_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6345_ENET_PHY_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6345_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6345_ENET0_TXDMA_IRQ,
+};
+
+/*
+ * 6348 register sets and irqs
+ */
+static const unsigned long bcm96348_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6348_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6348_PERF_BASE,
+	[RSET_TIMER]		= BCM_6348_TIMER_BASE,
+	[RSET_WDT]		= BCM_6348_WDT_BASE,
+	[RSET_UART0]		= BCM_6348_UART0_BASE,
+	[RSET_GPIO]		= BCM_6348_GPIO_BASE,
+	[RSET_SPI]		= BCM_6348_SPI_BASE,
+	[RSET_OHCI0]		= BCM_6348_OHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6348_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6348_USBH_PRIV_BASE,
+	[RSET_MPI]		= BCM_6348_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6348_PCMCIA_BASE,
+	[RSET_SDRAM]		= BCM_6348_SDRAM_BASE,
+	[RSET_DSL]		= BCM_6348_DSL_BASE,
+	[RSET_ENET0]		= BCM_6348_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6348_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6348_ENETDMA_BASE,
+	[RSET_MEMC]		= BCM_6348_MEMC_BASE,
+	[RSET_DDR]		= BCM_6348_DDR_BASE,
+};
+
+static const int bcm96348_irqs[] = {
+	[IRQ_TIMER]		= BCM_6348_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6348_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6348_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6348_ENET0_IRQ,
+	[IRQ_ENET1]		= BCM_6348_ENET1_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6348_ENET_PHY_IRQ,
+	[IRQ_OHCI0]		= BCM_6348_OHCI0_IRQ,
+	[IRQ_PCMCIA]		= BCM_6348_PCMCIA_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6348_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6348_ENET0_TXDMA_IRQ,
+	[IRQ_ENET1_RXDMA]	= BCM_6348_ENET1_RXDMA_IRQ,
+	[IRQ_ENET1_TXDMA]	= BCM_6348_ENET1_TXDMA_IRQ,
+	[IRQ_PCI]		= BCM_6348_PCI_IRQ,
+};
+
+/*
+ * 6358 register sets and irqs
+ */
+static const unsigned long bcm96358_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6358_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6358_PERF_BASE,
+	[RSET_TIMER]		= BCM_6358_TIMER_BASE,
+	[RSET_WDT]		= BCM_6358_WDT_BASE,
+	[RSET_UART0]		= BCM_6358_UART0_BASE,
+	[RSET_GPIO]		= BCM_6358_GPIO_BASE,
+	[RSET_SPI]		= BCM_6358_SPI_BASE,
+	[RSET_OHCI0]		= BCM_6358_OHCI0_BASE,
+	[RSET_EHCI0]		= BCM_6358_EHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6358_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6358_USBH_PRIV_BASE,
+	[RSET_MPI]		= BCM_6358_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6358_PCMCIA_BASE,
+	[RSET_SDRAM]		= BCM_6358_SDRAM_BASE,
+	[RSET_DSL]		= BCM_6358_DSL_BASE,
+	[RSET_ENET0]		= BCM_6358_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6358_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6358_ENETDMA_BASE,
+	[RSET_MEMC]		= BCM_6358_MEMC_BASE,
+	[RSET_DDR]		= BCM_6358_DDR_BASE,
+};
+
+static const int bcm96358_irqs[] = {
+	[IRQ_TIMER]		= BCM_6358_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6358_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6358_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6358_ENET0_IRQ,
+	[IRQ_ENET1]		= BCM_6358_ENET1_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6358_ENET_PHY_IRQ,
+	[IRQ_OHCI0]		= BCM_6358_OHCI0_IRQ,
+	[IRQ_EHCI0]		= BCM_6358_EHCI0_IRQ,
+	[IRQ_PCMCIA]		= BCM_6358_PCMCIA_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6358_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6358_ENET0_TXDMA_IRQ,
+	[IRQ_ENET1_RXDMA]	= BCM_6358_ENET1_RXDMA_IRQ,
+	[IRQ_ENET1_TXDMA]	= BCM_6358_ENET1_TXDMA_IRQ,
+	[IRQ_PCI]		= BCM_6358_PCI_IRQ,
+};
+
+u16 __bcm63xx_get_cpu_id(void)
+{
+	return bcm63xx_cpu_id;
+}
+
+EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
+
+u16 bcm63xx_get_cpu_rev(void)
+{
+	return bcm63xx_cpu_rev;
+}
+
+EXPORT_SYMBOL(bcm63xx_get_cpu_rev);
+
+unsigned int bcm63xx_get_cpu_freq(void)
+{
+	return bcm63xx_cpu_freq;
+}
+
+unsigned int bcm63xx_get_memory_size(void)
+{
+	return bcm63xx_memory_size;
+}
+
+static unsigned int detect_cpu_clock(void)
+{
+	unsigned int tmp, n1 = 0, n2 = 0, m1 = 0;
+
+	/* BCM6338 has a fixed 240 Mhz frequency */
+	if (BCMCPU_IS_6338())
+		return 240000000;
+
+	/* BCM6345 has a fixed 140Mhz frequency */
+	if (BCMCPU_IS_6345())
+		return 140000000;
+
+	/*
+	 * frequency depends on PLL configuration:
+	 */
+	if (BCMCPU_IS_6348()) {
+		/* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */
+		tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG);
+		n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT;
+		n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT;
+		m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT;
+		n1 += 1;
+		n2 += 2;
+		m1 += 1;
+	}
+
+	if (BCMCPU_IS_6358()) {
+		/* 16MHz * N1 * N2 / M1_CPU */
+		tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG);
+		n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT;
+		n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT;
+		m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT;
+	}
+
+	return (16 * 1000000 * n1 * n2) / m1;
+}
+
+/*
+ * attempt to detect the amount of memory installed
+ */
+static unsigned int detect_memory_size(void)
+{
+	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+	u32 val;
+
+	if (BCMCPU_IS_6345())
+		return (8 * 1024 * 1024);
+
+	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+		val = bcm_sdram_readl(SDRAM_CFG_REG);
+		rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT;
+		cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT;
+		is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0;
+		banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
+	}
+
+	if (BCMCPU_IS_6358()) {
+		val = bcm_memc_readl(MEMC_CFG_REG);
+		rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
+		cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
+		is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1;
+		banks = 2;
+	}
+
+	/* 0 => 11 address bits ... 2 => 13 address bits */
+	rows += 11;
+
+	/* 0 => 8 address bits ... 2 => 10 address bits */
+	cols += 8;
+
+	return 1 << (cols + rows + (is_32bits + 1) + banks);
+}
+
+void __init bcm63xx_cpu_init(void)
+{
+	unsigned int tmp, expected_cpu_id;
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	/* soc registers location depends on cpu type */
+	expected_cpu_id = 0;
+
+	switch (c->cputype) {
+	/*
+	 * BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c
+	 */
+	case CPU_BCM3302:
+		expected_cpu_id = BCM6338_CPU_ID;
+		bcm63xx_regs_base = bcm96338_regs_base;
+		bcm63xx_irqs = bcm96338_irqs;
+		break;
+	case CPU_BCM6345:
+		expected_cpu_id = BCM6345_CPU_ID;
+		bcm63xx_regs_base = bcm96345_regs_base;
+		bcm63xx_irqs = bcm96345_irqs;
+		break;
+	case CPU_BCM6348:
+		expected_cpu_id = BCM6348_CPU_ID;
+		bcm63xx_regs_base = bcm96348_regs_base;
+		bcm63xx_irqs = bcm96348_irqs;
+		break;
+	case CPU_BCM6358:
+		expected_cpu_id = BCM6358_CPU_ID;
+		bcm63xx_regs_base = bcm96358_regs_base;
+		bcm63xx_irqs = bcm96358_irqs;
+		break;
+	}
+
+	/*
+	 * really early to panic, but delaying panic would not help since we
+	 * will never get any working console
+	 */
+	if (!expected_cpu_id)
+		panic("unsupported Broadcom CPU");
+
+	/*
+	 * bcm63xx_regs_base is set, we can access soc registers
+	 */
+
+	/* double check CPU type */
+	tmp = bcm_perf_readl(PERF_REV_REG);
+	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+
+	if (bcm63xx_cpu_id != expected_cpu_id)
+		panic("bcm63xx CPU id mismatch");
+
+	bcm63xx_cpu_freq = detect_cpu_clock();
+	bcm63xx_memory_size = detect_memory_size();
+
+	printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n",
+	       bcm63xx_cpu_id, bcm63xx_cpu_rev);
+	printk(KERN_INFO "CPU frequency is %u MHz\n",
+	       bcm63xx_cpu_freq / 1000000);
+	printk(KERN_INFO "%uMB of RAM installed\n",
+	       bcm63xx_memory_size >> 20);
+}
diff --git a/arch/mips/bcm63xx/cs.c b/arch/mips/bcm63xx/cs.c
new file mode 100644
index 000000000000..50d8190bbf7b
--- /dev/null
+++ b/arch/mips/bcm63xx/cs.c
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/log2.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_cs.h>
+
+static DEFINE_SPINLOCK(bcm63xx_cs_lock);
+
+/*
+ * check if given chip select exists
+ */
+static int is_valid_cs(unsigned int cs)
+{
+	if (cs > 6)
+		return 0;
+	return 1;
+}
+
+/*
+ * Configure chipselect base address and size (bytes).
+ * Size must be a power of two between 8k and 256M.
+ */
+int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	/* sanity check on size */
+	if (size != roundup_pow_of_two(size))
+		return -EINVAL;
+
+	if (size < 8 * 1024 || size > 256 * 1024 * 1024)
+		return -EINVAL;
+
+	val = (base & MPI_CSBASE_BASE_MASK);
+	/* 8k => 0 - 256M => 15 */
+	val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	bcm_mpi_writel(val, MPI_CSBASE_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_base);
+
+/*
+ * configure chipselect timing (ns)
+ */
+int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
+			   unsigned int setup, unsigned int hold)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+	val &= ~(MPI_CSCTL_WAIT_MASK);
+	val &= ~(MPI_CSCTL_SETUP_MASK);
+	val &= ~(MPI_CSCTL_HOLD_MASK);
+	val |= wait << MPI_CSCTL_WAIT_SHIFT;
+	val |= setup << MPI_CSCTL_SETUP_SHIFT;
+	val |= hold << MPI_CSCTL_HOLD_SHIFT;
+	bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_timing);
+
+/*
+ * configure other chipselect parameter (data bus size, ...)
+ */
+int bcm63xx_set_cs_param(unsigned int cs, u32 params)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	/* none of this fields apply to pcmcia */
+	if (cs == MPI_CS_PCMCIA_COMMON ||
+	    cs == MPI_CS_PCMCIA_ATTR ||
+	    cs == MPI_CS_PCMCIA_IO)
+		return -EINVAL;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+	val &= ~(MPI_CSCTL_DATA16_MASK);
+	val &= ~(MPI_CSCTL_SYNCMODE_MASK);
+	val &= ~(MPI_CSCTL_TSIZE_MASK);
+	val &= ~(MPI_CSCTL_ENDIANSWAP_MASK);
+	val |= params;
+	bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_param);
+
+/*
+ * set cs status (enable/disable)
+ */
+int bcm63xx_set_cs_status(unsigned int cs, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+	if (enable)
+		val |= MPI_CSCTL_ENABLE_MASK;
+	else
+		val &= ~MPI_CSCTL_ENABLE_MASK;
+	bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_status);
diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c
new file mode 100644
index 000000000000..da46d1d3c77c
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-dsp.c
@@ -0,0 +1,56 @@
+/*
+ * Broadcom BCM63xx VoIP DSP registration
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+static struct resource voip_dsp_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_voip_dsp_device = {
+	.name		= "bcm63xx-voip-dsp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(voip_dsp_resources),
+	.resource	= voip_dsp_resources,
+};
+
+int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd)
+{
+	struct bcm63xx_dsp_platform_data *dpd;
+	u32 val;
+
+	/* Get the memory window */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1));
+	val &= MPI_CSBASE_BASE_MASK;
+	voip_dsp_resources[0].start = val;
+	voip_dsp_resources[0].end = val + 0xFFFFFFF;
+	voip_dsp_resources[1].start = pd->ext_irq;
+
+	/* copy given platform data */
+	dpd = bcm63xx_voip_dsp_device.dev.platform_data;
+	memcpy(dpd, pd, sizeof (*pd));
+
+	return platform_device_register(&bcm63xx_voip_dsp_device);
+}
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
new file mode 100644
index 000000000000..9f544badd0b4
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -0,0 +1,159 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource shared_res[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bcm63xx_enet_shared_device = {
+	.name		= "bcm63xx_enet_shared",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(shared_res),
+	.resource	= shared_res,
+};
+
+static int shared_device_registered;
+
+static struct resource enet0_res[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct bcm63xx_enet_platform_data enet0_pd;
+
+static struct platform_device bcm63xx_enet0_device = {
+	.name		= "bcm63xx_enet",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(enet0_res),
+	.resource	= enet0_res,
+	.dev		= {
+		.platform_data = &enet0_pd,
+	},
+};
+
+static struct resource enet1_res[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct bcm63xx_enet_platform_data enet1_pd;
+
+static struct platform_device bcm63xx_enet1_device = {
+	.name		= "bcm63xx_enet",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(enet1_res),
+	.resource	= enet1_res,
+	.dev		= {
+		.platform_data = &enet1_pd,
+	},
+};
+
+int __init bcm63xx_enet_register(int unit,
+				 const struct bcm63xx_enet_platform_data *pd)
+{
+	struct platform_device *pdev;
+	struct bcm63xx_enet_platform_data *dpd;
+	int ret;
+
+	if (unit > 1)
+		return -ENODEV;
+
+	if (!shared_device_registered) {
+		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
+		shared_res[0].end = shared_res[0].start;
+		if (BCMCPU_IS_6338())
+			shared_res[0].end += (RSET_ENETDMA_SIZE / 2)  - 1;
+		else
+			shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+
+		ret = platform_device_register(&bcm63xx_enet_shared_device);
+		if (ret)
+			return ret;
+		shared_device_registered = 1;
+	}
+
+	if (unit == 0) {
+		enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0);
+		enet0_res[0].end = enet0_res[0].start;
+		enet0_res[0].end += RSET_ENET_SIZE - 1;
+		enet0_res[1].start = bcm63xx_get_irq_number(IRQ_ENET0);
+		enet0_res[2].start = bcm63xx_get_irq_number(IRQ_ENET0_RXDMA);
+		enet0_res[3].start = bcm63xx_get_irq_number(IRQ_ENET0_TXDMA);
+		pdev = &bcm63xx_enet0_device;
+	} else {
+		enet1_res[0].start = bcm63xx_regset_address(RSET_ENET1);
+		enet1_res[0].end = enet1_res[0].start;
+		enet1_res[0].end += RSET_ENET_SIZE - 1;
+		enet1_res[1].start = bcm63xx_get_irq_number(IRQ_ENET1);
+		enet1_res[2].start = bcm63xx_get_irq_number(IRQ_ENET1_RXDMA);
+		enet1_res[3].start = bcm63xx_get_irq_number(IRQ_ENET1_TXDMA);
+		pdev = &bcm63xx_enet1_device;
+	}
+
+	/* copy given platform data */
+	dpd = pdev->dev.platform_data;
+	memcpy(dpd, pd, sizeof(*pd));
+
+	/* adjust them in case internal phy is used */
+	if (dpd->use_internal_phy) {
+
+		/* internal phy only exists for enet0 */
+		if (unit == 1)
+			return -ENODEV;
+
+		dpd->phy_id = 1;
+		dpd->has_phy_interrupt = 1;
+		dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY);
+	}
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		return ret;
+	return 0;
+}
diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c
new file mode 100644
index 000000000000..bf353c937df2
--- /dev/null
+++ b/arch/mips/bcm63xx/early_printk.c
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static void __init wait_xfered(void)
+{
+	unsigned int val;
+
+	/* wait for any previous char to be transmitted */
+	do {
+		val = bcm_uart0_readl(UART_IR_REG);
+		if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+			break;
+	} while (1);
+}
+
+void __init prom_putchar(char c)
+{
+	wait_xfered();
+	bcm_uart0_writel(c, UART_FIFO_REG);
+	wait_xfered();
+}
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
new file mode 100644
index 000000000000..87ca39046334
--- /dev/null
+++ b/arch/mips/bcm63xx/gpio.c
@@ -0,0 +1,134 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_gpio.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+static u32 gpio_out_low, gpio_out_high;
+
+static void bcm63xx_gpio_set(struct gpio_chip *chip,
+			     unsigned gpio, int val)
+{
+	u32 reg;
+	u32 mask;
+	u32 *v;
+	unsigned long flags;
+
+	if (gpio >= chip->ngpio)
+		BUG();
+
+	if (gpio < 32) {
+		reg = GPIO_DATA_LO_REG;
+		mask = 1 << gpio;
+		v = &gpio_out_low;
+	} else {
+		reg = GPIO_DATA_HI_REG;
+		mask = 1 << (gpio - 32);
+		v = &gpio_out_high;
+	}
+
+	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+	if (val)
+		*v |= mask;
+	else
+		*v &= ~mask;
+	bcm_gpio_writel(*v, reg);
+	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+}
+
+static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 reg;
+	u32 mask;
+
+	if (gpio >= chip->ngpio)
+		BUG();
+
+	if (gpio < 32) {
+		reg = GPIO_DATA_LO_REG;
+		mask = 1 << gpio;
+	} else {
+		reg = GPIO_DATA_HI_REG;
+		mask = 1 << (gpio - 32);
+	}
+
+	return !!(bcm_gpio_readl(reg) & mask);
+}
+
+static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
+				      unsigned gpio, int dir)
+{
+	u32 reg;
+	u32 mask;
+	u32 tmp;
+	unsigned long flags;
+
+	if (gpio >= chip->ngpio)
+		BUG();
+
+	if (gpio < 32) {
+		reg = GPIO_CTL_LO_REG;
+		mask = 1 << gpio;
+	} else {
+		reg = GPIO_CTL_HI_REG;
+		mask = 1 << (gpio - 32);
+	}
+
+	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+	tmp = bcm_gpio_readl(reg);
+	if (dir == GPIO_DIR_IN)
+		tmp &= ~mask;
+	else
+		tmp |= mask;
+	bcm_gpio_writel(tmp, reg);
+	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+
+	return 0;
+}
+
+static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN);
+}
+
+static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned gpio, int value)
+{
+	bcm63xx_gpio_set(chip, gpio, value);
+	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT);
+}
+
+
+static struct gpio_chip bcm63xx_gpio_chip = {
+	.label			= "bcm63xx-gpio",
+	.direction_input	= bcm63xx_gpio_direction_input,
+	.direction_output	= bcm63xx_gpio_direction_output,
+	.get			= bcm63xx_gpio_get,
+	.set			= bcm63xx_gpio_set,
+	.base			= 0,
+};
+
+int __init bcm63xx_gpio_init(void)
+{
+	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
+
+	return gpiochip_add(&bcm63xx_gpio_chip);
+}
+
+arch_initcall(bcm63xx_gpio_init);
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
new file mode 100644
index 000000000000..a0c5cd18c192
--- /dev/null
+++ b/arch/mips/bcm63xx/irq.c
@@ -0,0 +1,253 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_irq.h>
+
+/*
+ * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
+ * prioritize any interrupt relatively to another. the static counter
+ * will resume the loop where it ended the last time we left this
+ * function.
+ */
+static void bcm63xx_irq_dispatch_internal(void)
+{
+	u32 pending;
+	static int i;
+
+	pending = bcm_perf_readl(PERF_IRQMASK_REG) &
+		bcm_perf_readl(PERF_IRQSTAT_REG);
+
+	if (!pending)
+		return ;
+
+	while (1) {
+		int to_call = i;
+
+		i = (i + 1) & 0x1f;
+		if (pending & (1 << to_call)) {
+			do_IRQ(to_call + IRQ_INTERNAL_BASE);
+			break;
+		}
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	u32 cause;
+
+	do {
+		cause = read_c0_cause() & read_c0_status() & ST0_IM;
+
+		if (!cause)
+			break;
+
+		if (cause & CAUSEF_IP7)
+			do_IRQ(7);
+		if (cause & CAUSEF_IP2)
+			bcm63xx_irq_dispatch_internal();
+		if (cause & CAUSEF_IP3)
+			do_IRQ(IRQ_EXT_0);
+		if (cause & CAUSEF_IP4)
+			do_IRQ(IRQ_EXT_1);
+		if (cause & CAUSEF_IP5)
+			do_IRQ(IRQ_EXT_2);
+		if (cause & CAUSEF_IP6)
+			do_IRQ(IRQ_EXT_3);
+	} while (1);
+}
+
+/*
+ * internal IRQs operations: only mask/unmask on PERF irq mask
+ * register.
+ */
+static inline void bcm63xx_internal_irq_mask(unsigned int irq)
+{
+	u32 mask;
+
+	irq -= IRQ_INTERNAL_BASE;
+	mask = bcm_perf_readl(PERF_IRQMASK_REG);
+	mask &= ~(1 << irq);
+	bcm_perf_writel(mask, PERF_IRQMASK_REG);
+}
+
+static void bcm63xx_internal_irq_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	irq -= IRQ_INTERNAL_BASE;
+	mask = bcm_perf_readl(PERF_IRQMASK_REG);
+	mask |= (1 << irq);
+	bcm_perf_writel(mask, PERF_IRQMASK_REG);
+}
+
+static unsigned int bcm63xx_internal_irq_startup(unsigned int irq)
+{
+	bcm63xx_internal_irq_unmask(irq);
+	return 0;
+}
+
+/*
+ * external IRQs operations: mask/unmask and clear on PERF external
+ * irq control register.
+ */
+static void bcm63xx_external_irq_mask(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= IRQ_EXT_BASE;
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg &= ~EXTIRQ_CFG_MASK(irq);
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static void bcm63xx_external_irq_unmask(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= IRQ_EXT_BASE;
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg |= EXTIRQ_CFG_MASK(irq);
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static void bcm63xx_external_irq_clear(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= IRQ_EXT_BASE;
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg |= EXTIRQ_CFG_CLEAR(irq);
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static unsigned int bcm63xx_external_irq_startup(unsigned int irq)
+{
+	set_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
+	irq_enable_hazard();
+	bcm63xx_external_irq_unmask(irq);
+	return 0;
+}
+
+static void bcm63xx_external_irq_shutdown(unsigned int irq)
+{
+	bcm63xx_external_irq_mask(irq);
+	clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
+	irq_disable_hazard();
+}
+
+static int bcm63xx_external_irq_set_type(unsigned int irq,
+					 unsigned int flow_type)
+{
+	u32 reg;
+	struct irq_desc *desc = irq_desc + irq;
+
+	irq -= IRQ_EXT_BASE;
+
+	flow_type &= IRQ_TYPE_SENSE_MASK;
+
+	if (flow_type == IRQ_TYPE_NONE)
+		flow_type = IRQ_TYPE_LEVEL_LOW;
+
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+		reg |= EXTIRQ_CFG_BOTHEDGE(irq);
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+		reg |= EXTIRQ_CFG_SENSE(irq);
+		reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+		reg &= ~EXTIRQ_CFG_SENSE(irq);
+		reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+		reg |= EXTIRQ_CFG_SENSE(irq);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+		reg &= ~EXTIRQ_CFG_SENSE(irq);
+		break;
+
+	default:
+		printk(KERN_ERR "bogus flow type combination given !\n");
+		return -EINVAL;
+	}
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+
+	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))  {
+		desc->status |= IRQ_LEVEL;
+		desc->handle_irq = handle_level_irq;
+	} else {
+		desc->handle_irq = handle_edge_irq;
+	}
+
+	return 0;
+}
+
+static struct irq_chip bcm63xx_internal_irq_chip = {
+	.name		= "bcm63xx_ipic",
+	.startup	= bcm63xx_internal_irq_startup,
+	.shutdown	= bcm63xx_internal_irq_mask,
+
+	.mask		= bcm63xx_internal_irq_mask,
+	.mask_ack	= bcm63xx_internal_irq_mask,
+	.unmask		= bcm63xx_internal_irq_unmask,
+};
+
+static struct irq_chip bcm63xx_external_irq_chip = {
+	.name		= "bcm63xx_epic",
+	.startup	= bcm63xx_external_irq_startup,
+	.shutdown	= bcm63xx_external_irq_shutdown,
+
+	.ack		= bcm63xx_external_irq_clear,
+
+	.mask		= bcm63xx_external_irq_mask,
+	.unmask		= bcm63xx_external_irq_unmask,
+
+	.set_type	= bcm63xx_external_irq_set_type,
+};
+
+static struct irqaction cpu_ip2_cascade_action = {
+	.handler	= no_action,
+	.name		= "cascade_ip2",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	mips_cpu_irq_init();
+	for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
+		set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip,
+					 handle_level_irq);
+
+	for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i)
+		set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip,
+					 handle_edge_irq);
+
+	setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action);
+}
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
new file mode 100644
index 000000000000..fb284fbc5853
--- /dev/null
+++ b/arch/mips/bcm63xx/prom.c
@@ -0,0 +1,55 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_gpio.h>
+
+void __init prom_init(void)
+{
+	u32 reg, mask;
+
+	bcm63xx_cpu_init();
+
+	/* stop any running watchdog */
+	bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG);
+	bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
+
+	/* disable all hardware blocks clock for now */
+	if (BCMCPU_IS_6338())
+		mask = CKCTL_6338_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6345())
+		mask = CKCTL_6345_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6348())
+		mask = CKCTL_6348_ALL_SAFE_EN;
+	else
+		/* BCMCPU_IS_6358() */
+		mask = CKCTL_6358_ALL_SAFE_EN;
+
+	reg = bcm_perf_readl(PERF_CKCTL_REG);
+	reg &= ~mask;
+	bcm_perf_writel(reg, PERF_CKCTL_REG);
+
+	/* assign command line from kernel config */
+	strcpy(arcs_cmdline, CONFIG_CMDLINE);
+
+	/* register gpiochip */
+	bcm63xx_gpio_init();
+
+	/* do low level board init */
+	board_prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
new file mode 100644
index 000000000000..b18a0ca926fa
--- /dev/null
+++ b/arch/mips/bcm63xx/setup.c
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/cacheflush.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+void bcm63xx_machine_halt(void)
+{
+	printk(KERN_INFO "System halted\n");
+	while (1)
+		;
+}
+
+static void bcm6348_a1_reboot(void)
+{
+	u32 reg;
+
+	/* soft reset all blocks */
+	printk(KERN_INFO "soft-reseting all blocks ...\n");
+	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+	reg &= ~SOFTRESET_6348_ALL;
+	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+	mdelay(10);
+
+	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+	reg |= SOFTRESET_6348_ALL;
+	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+	mdelay(10);
+
+	/* Jump to the power on address. */
+	printk(KERN_INFO "jumping to reset vector.\n");
+	/* set high vectors (base at 0xbfc00000 */
+	set_c0_status(ST0_BEV | ST0_ERL);
+	/* run uncached in kseg0 */
+	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+	__flush_cache_all();
+	/* remove all wired TLB entries */
+	write_c0_wired(0);
+	__asm__ __volatile__(
+		"jr\t%0"
+		:
+		: "r" (0xbfc00000));
+	while (1)
+		;
+}
+
+void bcm63xx_machine_reboot(void)
+{
+	u32 reg;
+
+	/* mask and clear all external irq */
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg &= ~EXTIRQ_CFG_MASK_ALL;
+	reg |= EXTIRQ_CFG_CLEAR_ALL;
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+
+	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
+		bcm6348_a1_reboot();
+
+	printk(KERN_INFO "triggering watchdog soft-reset...\n");
+	bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG);
+	while (1)
+		;
+}
+
+static void __bcm63xx_machine_reboot(char *p)
+{
+	bcm63xx_machine_reboot();
+}
+
+/*
+ * return system type in /proc/cpuinfo
+ */
+const char *get_system_type(void)
+{
+	static char buf[128];
+	snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)",
+		 board_get_name(),
+		 bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
+	return buf;
+}
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
+}
+
+void __init plat_mem_setup(void)
+{
+	add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
+
+	_machine_halt = bcm63xx_machine_halt;
+	_machine_restart = __bcm63xx_machine_reboot;
+	pm_power_off = bcm63xx_machine_halt;
+
+	set_io_port_base(0);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+
+	board_setup();
+}
+
+int __init bcm63xx_register_devices(void)
+{
+	return board_register_devices();
+}
+
+arch_initcall(bcm63xx_register_devices);
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
new file mode 100644
index 000000000000..ba522bdcde4b
--- /dev/null
+++ b/arch/mips/bcm63xx/timer.c
@@ -0,0 +1,205 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_timer.h>
+#include <bcm63xx_regs.h>
+
+static DEFINE_SPINLOCK(timer_reg_lock);
+static DEFINE_SPINLOCK(timer_data_lock);
+static struct clk *periph_clk;
+
+static struct timer_data {
+	void	(*cb)(void *);
+	void	*data;
+} timer_data[BCM63XX_TIMER_COUNT];
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	u32 stat;
+	int i;
+
+	spin_lock(&timer_reg_lock);
+	stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
+	spin_unlock(&timer_reg_lock);
+
+	for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
+		if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
+			continue;
+
+		spin_lock(&timer_data_lock);
+		if (!timer_data[i].cb) {
+			spin_unlock(&timer_data_lock);
+			continue;
+		}
+
+		timer_data[i].cb(timer_data[i].data);
+		spin_unlock(&timer_data_lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int bcm63xx_timer_enable(int id)
+{
+	u32 reg;
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return -EINVAL;
+
+	spin_lock_irqsave(&timer_reg_lock, flags);
+
+	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+	reg |= TIMER_CTL_ENABLE_MASK;
+	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+	reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
+	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_enable);
+
+int bcm63xx_timer_disable(int id)
+{
+	u32 reg;
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return -EINVAL;
+
+	spin_lock_irqsave(&timer_reg_lock, flags);
+
+	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+	reg &= ~TIMER_CTL_ENABLE_MASK;
+	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+	reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
+	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_disable);
+
+int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
+{
+	unsigned long flags;
+	int ret;
+
+	if (id >= BCM63XX_TIMER_COUNT || !callback)
+		return -EINVAL;
+
+	ret = 0;
+	spin_lock_irqsave(&timer_data_lock, flags);
+	if (timer_data[id].cb) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	timer_data[id].cb = callback;
+	timer_data[id].data = data;
+
+out:
+	spin_unlock_irqrestore(&timer_data_lock, flags);
+	return ret;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_register);
+
+void bcm63xx_timer_unregister(int id)
+{
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return;
+
+	spin_lock_irqsave(&timer_data_lock, flags);
+	timer_data[id].cb = NULL;
+	spin_unlock_irqrestore(&timer_data_lock, flags);
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_unregister);
+
+unsigned int bcm63xx_timer_countdown(unsigned int countdown_us)
+{
+	return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_countdown);
+
+int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
+{
+	u32 reg, countdown;
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return -EINVAL;
+
+	countdown = bcm63xx_timer_countdown(countdown_us);
+	if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
+		return -EINVAL;
+
+	spin_lock_irqsave(&timer_reg_lock, flags);
+	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+
+	if (monotonic)
+		reg &= ~TIMER_CTL_MONOTONIC_MASK;
+	else
+		reg |= TIMER_CTL_MONOTONIC_MASK;
+
+	reg &= ~TIMER_CTL_COUNTDOWN_MASK;
+	reg |= countdown;
+	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_set);
+
+int bcm63xx_timer_init(void)
+{
+	int ret, irq;
+	u32 reg;
+
+	reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN;
+	reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN;
+	reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN;
+	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+	periph_clk = clk_get(NULL, "periph");
+	if (IS_ERR(periph_clk))
+		return -ENODEV;
+
+	irq = bcm63xx_get_irq_number(IRQ_TIMER);
+	ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
+	if (ret) {
+		printk(KERN_ERR "bcm63xx_timer: failed to register irq\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+arch_initcall(bcm63xx_timer_init);
diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c
index c5a7f308c405..e19d906236af 100644
--- a/arch/mips/boot/elf2ecoff.c
+++ b/arch/mips/boot/elf2ecoff.c
@@ -59,8 +59,8 @@ struct sect {
 };
 
 int *symTypeTable;
-int must_convert_endian = 0;
-int format_bigendian = 0;
+int must_convert_endian;
+int format_bigendian;
 
 static void copy(int out, int in, off_t offset, off_t size)
 {
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index d6903c3f3d51..139436280520 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -6,10 +6,10 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 #
-# Copyright (C) 2005-2008 Cavium Networks
+# Copyright (C) 2005-2009 Cavium Networks
 #
 
-obj-y := setup.o serial.o octeon-irq.o csrc-octeon.o
+obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
 obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
new file mode 100644
index 000000000000..be711dd2d918
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -0,0 +1,164 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2009 Cavium Networks
+ * Copyright (C) 2008 Wind River Systems
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-rnm-defs.h>
+
+static struct octeon_cf_data octeon_cf_data;
+
+static int __init octeon_cf_device_init(void)
+{
+	union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
+	unsigned long base_ptr, region_base, region_size;
+	struct platform_device *pd;
+	struct resource cf_resources[3];
+	unsigned int num_resources;
+	int i;
+	int ret = 0;
+
+	/* Setup octeon-cf platform device if present. */
+	base_ptr = 0;
+	if (octeon_bootinfo->major_version == 1
+		&& octeon_bootinfo->minor_version >= 1) {
+		if (octeon_bootinfo->compact_flash_common_base_addr)
+			base_ptr =
+				octeon_bootinfo->compact_flash_common_base_addr;
+	} else {
+		base_ptr = 0x1d000800;
+	}
+
+	if (!base_ptr)
+		return ret;
+
+	/* Find CS0 region. */
+	for (i = 0; i < 8; i++) {
+		mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i));
+		region_base = mio_boot_reg_cfg.s.base << 16;
+		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+		if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
+		    && base_ptr < region_base + region_size)
+			break;
+	}
+	if (i >= 7) {
+		/* i and i + 1 are CS0 and CS1, both must be less than 8. */
+		goto out;
+	}
+	octeon_cf_data.base_region = i;
+	octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width;
+	octeon_cf_data.base_region_bias = base_ptr - region_base;
+	memset(cf_resources, 0, sizeof(cf_resources));
+	num_resources = 0;
+	cf_resources[num_resources].flags	= IORESOURCE_MEM;
+	cf_resources[num_resources].start	= region_base;
+	cf_resources[num_resources].end	= region_base + region_size - 1;
+	num_resources++;
+
+
+	if (!(base_ptr & 0xfffful)) {
+		/*
+		 * Boot loader signals availability of DMA (true_ide
+		 * mode) by setting low order bits of base_ptr to
+		 * zero.
+		 */
+
+		/* Asume that CS1 immediately follows. */
+		mio_boot_reg_cfg.u64 =
+			cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
+		region_base = mio_boot_reg_cfg.s.base << 16;
+		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+		if (!mio_boot_reg_cfg.s.en)
+			goto out;
+
+		cf_resources[num_resources].flags	= IORESOURCE_MEM;
+		cf_resources[num_resources].start	= region_base;
+		cf_resources[num_resources].end	= region_base + region_size - 1;
+		num_resources++;
+
+		octeon_cf_data.dma_engine = 0;
+		cf_resources[num_resources].flags	= IORESOURCE_IRQ;
+		cf_resources[num_resources].start	= OCTEON_IRQ_BOOTDMA;
+		cf_resources[num_resources].end	= OCTEON_IRQ_BOOTDMA;
+		num_resources++;
+	} else {
+		octeon_cf_data.dma_engine = -1;
+	}
+
+	pd = platform_device_alloc("pata_octeon_cf", -1);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	pd->dev.platform_data = &octeon_cf_data;
+
+	ret = platform_device_add_resources(pd, cf_resources, num_resources);
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+out:
+	return ret;
+}
+device_initcall(octeon_cf_device_init);
+
+/* Octeon Random Number Generator.  */
+static int __init octeon_rng_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+
+	struct resource rng_resources[] = {
+		{
+			.flags	= IORESOURCE_MEM,
+			.start	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS),
+			.end	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf
+		}, {
+			.flags	= IORESOURCE_MEM,
+			.start	= cvmx_build_io_address(8, 0),
+			.end	= cvmx_build_io_address(8, 0) + 0x7
+		}
+	};
+
+	pd = platform_device_alloc("octeon_rng", -1);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = platform_device_add_resources(pd, rng_resources,
+					    ARRAY_SIZE(rng_resources));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+
+out:
+	return ret;
+}
+device_initcall(octeon_rng_device_init);
+
+MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Platform driver for Octeon SOC");
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index da559249cc2f..b321d3b16877 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -11,7 +11,6 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/serial.h>
 #include <linux/smp.h>
 #include <linux/types.h>
@@ -824,105 +823,3 @@ void prom_free_prom_memory(void)
 	   CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
 	octeon_hal_setup_reserved32();
 }
-
-static struct octeon_cf_data octeon_cf_data;
-
-static int __init octeon_cf_device_init(void)
-{
-	union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
-	unsigned long base_ptr, region_base, region_size;
-	struct platform_device *pd;
-	struct resource cf_resources[3];
-	unsigned int num_resources;
-	int i;
-	int ret = 0;
-
-	/* Setup octeon-cf platform device if present. */
-	base_ptr = 0;
-	if (octeon_bootinfo->major_version == 1
-		&& octeon_bootinfo->minor_version >= 1) {
-		if (octeon_bootinfo->compact_flash_common_base_addr)
-			base_ptr =
-				octeon_bootinfo->compact_flash_common_base_addr;
-	} else {
-		base_ptr = 0x1d000800;
-	}
-
-	if (!base_ptr)
-		return ret;
-
-	/* Find CS0 region. */
-	for (i = 0; i < 8; i++) {
-		mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i));
-		region_base = mio_boot_reg_cfg.s.base << 16;
-		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
-		if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
-		    && base_ptr < region_base + region_size)
-			break;
-	}
-	if (i >= 7) {
-		/* i and i + 1 are CS0 and CS1, both must be less than 8. */
-		goto out;
-	}
-	octeon_cf_data.base_region = i;
-	octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width;
-	octeon_cf_data.base_region_bias = base_ptr - region_base;
-	memset(cf_resources, 0, sizeof(cf_resources));
-	num_resources = 0;
-	cf_resources[num_resources].flags	= IORESOURCE_MEM;
-	cf_resources[num_resources].start	= region_base;
-	cf_resources[num_resources].end	= region_base + region_size - 1;
-	num_resources++;
-
-
-	if (!(base_ptr & 0xfffful)) {
-		/*
-		 * Boot loader signals availability of DMA (true_ide
-		 * mode) by setting low order bits of base_ptr to
-		 * zero.
-		 */
-
-		/* Asume that CS1 immediately follows. */
-		mio_boot_reg_cfg.u64 =
-			cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
-		region_base = mio_boot_reg_cfg.s.base << 16;
-		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
-		if (!mio_boot_reg_cfg.s.en)
-			goto out;
-
-		cf_resources[num_resources].flags	= IORESOURCE_MEM;
-		cf_resources[num_resources].start	= region_base;
-		cf_resources[num_resources].end	= region_base + region_size - 1;
-		num_resources++;
-
-		octeon_cf_data.dma_engine = 0;
-		cf_resources[num_resources].flags	= IORESOURCE_IRQ;
-		cf_resources[num_resources].start	= OCTEON_IRQ_BOOTDMA;
-		cf_resources[num_resources].end	= OCTEON_IRQ_BOOTDMA;
-		num_resources++;
-	} else {
-		octeon_cf_data.dma_engine = -1;
-	}
-
-	pd = platform_device_alloc("pata_octeon_cf", -1);
-	if (!pd) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	pd->dev.platform_data = &octeon_cf_data;
-
-	ret = platform_device_add_resources(pd, cf_resources, num_resources);
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pd);
-	if (ret)
-		goto fail;
-
-	return ret;
-fail:
-	platform_device_put(pd);
-out:
-	return ret;
-}
-device_initcall(octeon_cf_device_init);
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index dad5b6769d74..35648302f7cc 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -125,7 +125,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index d8694332b344..94b7d57f906d 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -111,7 +111,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
new file mode 100644
index 000000000000..ea00c18d1f7b
--- /dev/null
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -0,0 +1,972 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Sun May 31 20:17:18 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+CONFIG_BCM63XX=y
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+
+#
+# CPU support
+#
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BOARD_BCM963XX=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_MMU=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_BCM63XX=y
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BCM63XX_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_BCM63XX_ENET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+# CONFIG_SSB_DRIVER_PCICORE is not set
+# CONFIG_SSB_DRIVER_MIPS is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index d6d35b2e5fe8..13d9eb4736c0 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -129,7 +129,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index eb44b72254af..6c8cca8589ba 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -112,7 +112,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index a279165e3a7d..dbdf3bb1a34a 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 8944d15caf13..fa6814475898 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index ab17973107fd..d73f1de43b5d 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index b65803f19352..ec3e028a5b2e 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -116,7 +116,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index a190ac07740b..7631dae51be9 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 4e465e945991..1995d43a2ed1 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -118,7 +118,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 786a9bc9a696..0197f0de6b3f 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Fri Nov 28 17:53:48 2008
+# Linux kernel version: 2.6.31-rc1
+# Thu Jul  2 22:37:00 2009
 #
 CONFIG_MIPS=y
 
@@ -9,16 +9,17 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-CONFIG_LEMOTE_FULONG=y
+CONFIG_MACH_LOONGSON=y
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_NXP_STB220 is not set
 # CONFIG_NXP_STB225 is not set
@@ -43,6 +44,11 @@ CONFIG_LEMOTE_FULONG=y
 # CONFIG_MACH_TX49XX is not set
 # CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_LEMOTE_FULOONG2E=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -53,15 +59,16 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 CONFIG_I8259=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_ISA_DMA=y
@@ -72,12 +79,11 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 
 #
 # CPU selection
 #
-CONFIG_CPU_LOONGSON2=y
+CONFIG_CPU_LOONGSON2E=y
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -98,7 +104,9 @@ CONFIG_CPU_LOONGSON2=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_LOONGSON2=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_LOONGSON2=y
+CONFIG_SYS_HAS_CPU_LOONGSON2E=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -112,6 +120,7 @@ CONFIG_64BIT=y
 # CONFIG_PAGE_SIZE_4KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
 CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
@@ -125,7 +134,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -135,11 +143,12 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -161,6 +170,7 @@ CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -168,21 +178,31 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="lm32"
+CONFIG_LOCALVERSION="-fuloong2e"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -191,9 +211,11 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
 CONFIG_PID_NS=y
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -203,29 +225,40 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 # CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -233,9 +266,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -252,8 +283,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -263,6 +293,8 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_ISA=y
 CONFIG_MMU=y
 # CONFIG_PCCARD is not set
@@ -285,12 +317,12 @@ CONFIG_BINFMT_ELF32=y
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
 CONFIG_NET=y
 
 #
@@ -346,9 +378,11 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -361,6 +395,7 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -381,6 +416,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 # CONFIG_IP_VS is not set
 
 #
@@ -419,30 +455,34 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+CONFIG_PHONET=m
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-CONFIG_PHONET=m
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 CONFIG_NET_9P=m
 # CONFIG_NET_9P_DEBUG is not set
@@ -466,6 +506,7 @@ CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -516,9 +557,7 @@ CONFIG_MTD_CFI_UTIL=m
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x1fc00000
-CONFIG_MTD_PHYSMAP_LEN=0x80000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -541,6 +580,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -573,6 +617,7 @@ CONFIG_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
@@ -582,7 +627,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
 CONFIG_IDE_TASK_IOCTL=y
 CONFIG_IDE_PROC_FS=y
 
@@ -613,6 +657,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -660,10 +705,6 @@ CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
@@ -681,6 +722,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -690,7 +732,11 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -718,6 +764,9 @@ CONFIG_CICADA_PHY=m
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -729,7 +778,9 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
@@ -752,7 +803,6 @@ CONFIG_NET_PCI=y
 # CONFIG_FORCEDETH is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -766,8 +816,10 @@ CONFIG_8139TOO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -778,6 +830,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -788,17 +841,21 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -808,6 +865,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -815,7 +873,10 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -872,7 +933,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
+CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -883,7 +944,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -894,6 +954,7 @@ CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -939,10 +1000,13 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1006,19 +1070,20 @@ CONFIG_I2C_VIAPRO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -1041,140 +1106,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_VIDEO_SH_MOBILE_CEU=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_USB_DSBR is not set
-CONFIG_USB_SI470X=m
-CONFIG_USB_MR800=m
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1235,12 +1170,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 
 #
 # Display device support
@@ -1273,12 +1209,19 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_RTCTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
 CONFIG_SND_DRIVERS=y
@@ -1305,6 +1248,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1317,6 +1261,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1333,6 +1279,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1363,43 +1310,18 @@ CONFIG_HIDRAW=y
 #
 # USB Input Devices
 #
-CONFIG_USB_HID=m
+# CONFIG_USB_HID is not set
 CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
 
 #
 # USB HID Boot Protocol drivers
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_USB_KBD=y
+CONFIG_USB_MOUSE=y
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1427,9 +1349,11 @@ CONFIG_USB_WUSB_CBAF=m
 # USB Host Controller Drivers
 #
 CONFIG_USB_C67X00_HCD=m
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_ISP1760_HCD=m
 CONFIG_USB_OHCI_HCD=y
@@ -1451,18 +1375,17 @@ CONFIG_USB_WDM=m
 CONFIG_USB_TMC=m
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1498,7 +1421,6 @@ CONFIG_USB_SEVSEG=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1510,72 +1432,32 @@ CONFIG_USB_SEVSEG=m
 CONFIG_USB_ISIGHTFW=m
 CONFIG_USB_VST=m
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
+# CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
 # CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1584,6 +1466,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
 CONFIG_EXT4DEV_COMPAT=y
@@ -1592,7 +1475,9 @@ CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
 CONFIG_FS_XIP=y
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
 CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
@@ -1600,10 +1485,12 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1611,6 +1498,12 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1645,10 +1538,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1658,6 +1548,7 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_OMFS_FS=m
@@ -1666,11 +1557,13 @@ CONFIG_OMFS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
@@ -1683,7 +1576,6 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1775,17 +1667,21 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_FRAME_WARN=2048
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
@@ -1804,13 +1700,21 @@ CONFIG_CRYPTO=y
 #
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1879,6 +1783,7 @@ CONFIG_CRYPTO_SEED=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1886,11 +1791,13 @@ CONFIG_CRYPTO_LZO=m
 #
 CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
@@ -1906,7 +1813,7 @@ CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 115822876417..f14d38ba6034 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -130,7 +130,6 @@ CONFIG_IP22_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 0208723adf28..1fc73aa7b509 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -105,7 +105,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index 70a744e9a8c5..539dccb0345d 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -123,7 +123,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index de4c7a0a96dd..d934bdefb393 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -118,7 +118,6 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index bbacc35d804f..d22df61833a8 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -119,7 +119,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index bc9159fda728..044074db7e55 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -108,7 +108,6 @@ CONFIG_R5000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 1ecdd3b65dc7..3f01870b4d65 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -139,7 +139,6 @@ CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_MIPS_MT_FPAFF=y
 # CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
 # CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_MIPSR2_IRQ_EI=y
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
index bad8901f8f3c..d001f7e87418 100644
--- a/arch/mips/configs/markeins_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 2c0a6314e901..7358454deaa6 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 # CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 84d6491b3d41..ecbc030b7b6c 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -129,7 +129,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index fadb351d249b..9477f040796d 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -116,7 +116,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 9e21e333a2fc..be8091ef0a79 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index af67ed4f71ae..e74ba794c789 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 7956f56cbf3e..1d896fd830da 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig
index 2728caa6c2fb..fef4d31c2055 100644
--- a/arch/mips/configs/pnx8335-stb225_defconfig
+++ b/arch/mips/configs/pnx8335-stb225_defconfig
@@ -112,7 +112,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 723bd5176a35..e10c7116c3c2 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index b5052fb42e9e..5ed3c8dfa0a1 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index f28dc32974e5..f40c3a04739d 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -113,7 +113,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 1efe977497dd..c69813b8488c 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -142,7 +142,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 0f4da0325ea4..e53b8d096cfc 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -124,7 +124,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index a9acaa2f9da3..7f38c0b956f3 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -133,7 +133,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_SB1_PASS_2_WORKAROUNDS=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index fc2c56731b98..06acc7482e4c 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -120,7 +120,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index ea8249c75b3f..69feaf88b510 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index 5a557e268f78..e95ff3054ff6 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -18,7 +18,7 @@
 #include <asm/sections.h>
 
 
-volatile unsigned long mem_err = 0;	/* So we know an error occurred */
+volatile unsigned long mem_err;		/* So we know an error occurred */
 
 /*
  * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 463136e6685a..02f505f23c32 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -18,7 +18,7 @@
 #include <asm/dec/ioasic.h>
 #include <asm/dec/machtype.h>
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, mon, day, hour, min, sec, real_year;
 	unsigned long flags;
@@ -53,7 +53,8 @@ unsigned long read_persistent_clock(void)
 
 	year += real_year - 72 + 2000;
 
-	return mktime(year, mon, day, hour, min, sec);
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
 }
 
 /*
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
index 335dc8c1a1bb..9b3f51e5f140 100644
--- a/arch/mips/emma/markeins/setup.c
+++ b/arch/mips/emma/markeins/setup.c
@@ -32,7 +32,7 @@
 
 extern void markeins_led(const char *);
 
-static int bus_frequency = 0;
+static int bus_frequency;
 
 static void markeins_machine_restart(char *command)
 {
diff --git a/arch/mips/fw/arc/Makefile b/arch/mips/fw/arc/Makefile
index 4f349ec1ea2d..e0aaad482b0e 100644
--- a/arch/mips/fw/arc/Makefile
+++ b/arch/mips/fw/arc/Makefile
@@ -8,3 +8,5 @@ lib-y				+= cmdline.o env.o file.o identify.o init.o \
 lib-$(CONFIG_ARC_MEMORY)	+= memory.o
 lib-$(CONFIG_ARC_CONSOLE)	+= arc_con.o
 lib-$(CONFIG_ARC_PROMLIB)	+= promlib.o
+
+EXTRA_CFLAGS			+= -Werror
diff --git a/arch/mips/fw/cfe/cfe_api.c b/arch/mips/fw/cfe/cfe_api.c
index 717db74f7c6e..d06dc5a6b8d3 100644
--- a/arch/mips/fw/cfe/cfe_api.c
+++ b/arch/mips/fw/cfe/cfe_api.c
@@ -45,8 +45,8 @@ int cfe_iocb_dispatch(struct cfe_xiocb *xiocb);
  * passed in two registers each, and CFE expects one.
  */
 
-static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb) = 0;
-static u64 cfe_handle = 0;
+static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb);
+static u64 cfe_handle;
 
 int cfe_init(u64 handle, u64 ept)
 {
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index eb7f01cfd1ac..dd75d673447e 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -49,7 +49,7 @@
  */
 static __inline__ void atomic_add(int i, atomic_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -61,7 +61,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -94,7 +94,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
  */
 static __inline__ void atomic_sub(int i, atomic_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -106,7 +106,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -139,7 +139,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -153,7 +153,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -191,7 +191,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -205,7 +205,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -251,7 +251,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -269,7 +269,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -428,7 +428,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
  */
 static __inline__ void atomic64_add(long i, atomic64_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -440,7 +440,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -473,7 +473,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
  */
 static __inline__ void atomic64_sub(long i, atomic64_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -485,7 +485,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -518,7 +518,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -532,7 +532,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -570,7 +570,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -584,7 +584,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -630,7 +630,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -648,7 +648,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index b1e9e97a9c78..84a383806b2c 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -61,7 +61,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# set_bit	\n"
@@ -72,7 +72,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (1UL << bit), "m" (*m));
 #ifdef CONFIG_CPU_MIPSR2
-	} else if (__builtin_constant_p(bit)) {
+	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
 		__asm__ __volatile__(
 		"1:	" __LL "%0, %1			# set_bit	\n"
 		"	" __INS "%0, %4, %2, 1				\n"
@@ -84,7 +84,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (bit), "m" (*m), "r" (~0));
 #endif /* CONFIG_CPU_MIPSR2 */
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# set_bit	\n"
@@ -126,7 +126,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# clear_bit	\n"
@@ -137,7 +137,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (~(1UL << bit)), "m" (*m));
 #ifdef CONFIG_CPU_MIPSR2
-	} else if (__builtin_constant_p(bit)) {
+	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
 		__asm__ __volatile__(
 		"1:	" __LL "%0, %1			# clear_bit	\n"
 		"	" __INS "%0, $0, %2, 1				\n"
@@ -149,7 +149,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (bit), "m" (*m));
 #endif /* CONFIG_CPU_MIPSR2 */
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# clear_bit	\n"
@@ -202,7 +202,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned short bit = nr & SZLONG_MASK;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -215,7 +215,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		"	.set	mips0				\n"
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (1UL << bit), "m" (*m));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -260,7 +260,7 @@ static inline int test_and_set_bit(unsigned long nr,
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -275,7 +275,7 @@ static inline int test_and_set_bit(unsigned long nr,
 		: "=&r" (temp), "=m" (*m), "=&r" (res)
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -328,7 +328,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -343,7 +343,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 		: "=&r" (temp), "=m" (*m), "=&r" (res)
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -397,7 +397,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -414,7 +414,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
 #ifdef CONFIG_CPU_MIPSR2
-	} else if (__builtin_constant_p(nr)) {
+	} else if (kernel_uses_llsc && __builtin_constant_p(nr)) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -431,7 +431,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		: "ir" (bit), "m" (*m)
 		: "memory");
 #endif
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -487,7 +487,7 @@ static inline int test_and_change_bit(unsigned long nr,
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -502,7 +502,7 @@ static inline int test_and_change_bit(unsigned long nr,
 		: "=&r" (temp), "=m" (*m), "=&r" (res)
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 610fe3af7a03..f5dfaf6a1606 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -7,6 +7,7 @@
  * Copyright (C) 1995, 1996 Andreas Busse
  * Copyright (C) 1995, 1996 Stoned Elipot
  * Copyright (C) 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 2009       Zhang Le
  */
 #ifndef _ASM_BOOTINFO_H
 #define _ASM_BOOTINFO_H
@@ -57,6 +58,17 @@
 #define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
 #define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
 
+/*
+ * Valid machtype for Loongson family
+ */
+#define MACH_LOONGSON_UNKNOWN  0
+#define MACH_LEMOTE_FL2E       1
+#define MACH_LEMOTE_FL2F       2
+#define MACH_LEMOTE_ML2F7      3
+#define MACH_LEMOTE_YL2F89     4
+#define MACH_DEXXON_GDIUM2F10  5
+#define MACH_LOONGSON_END      6
+
 #define CL_SIZE			COMMAND_LINE_SIZE
 
 extern char *system_type;
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index 4a812c3ceb90..815a438a268d 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -16,7 +16,7 @@
 ({									\
 	__typeof(*(m)) __ret;						\
 									\
-	if (cpu_has_llsc && R10000_LLSC_WAR) {				\
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {				\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -33,7 +33,7 @@
 		: "=&r" (__ret), "=R" (*m)				\
 		: "R" (*m), "Jr" (old), "Jr" (new)			\
 		: "memory");						\
-	} else if (cpu_has_llsc) {					\
+	} else if (kernel_uses_llsc) {					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 8ab1d12ba7f4..1f4df647c384 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -80,6 +80,9 @@
 #ifndef cpu_has_llsc
 #define cpu_has_llsc		(cpu_data[0].options & MIPS_CPU_LLSC)
 #endif
+#ifndef kernel_uses_llsc
+#define kernel_uses_llsc	cpu_has_llsc
+#endif
 #ifndef cpu_has_mips16
 #define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
 #endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 3bdc0e3d89cc..4b96d1a36056 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -113,6 +113,12 @@
 
 #define PRID_IMP_BCM4710	0x4000
 #define PRID_IMP_BCM3302	0x9000
+#define PRID_IMP_BCM6338	0x9000
+#define PRID_IMP_BCM6345	0x8000
+#define PRID_IMP_BCM6348	0x9100
+#define PRID_IMP_BCM4350	0xA000
+#define PRID_REV_BCM6358	0x0010
+#define PRID_REV_BCM6368	0x0030
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_CAVIUM
@@ -210,6 +216,7 @@ enum cpu_type_enum {
 	 */
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
+	CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358,
 
 	/*
 	 * MIPS64 class processors
diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h
index d2d8949be6b7..e7cd78277c23 100644
--- a/arch/mips/include/asm/delay.h
+++ b/arch/mips/include/asm/delay.h
@@ -11,6 +11,8 @@
 #ifndef _ASM_DELAY_H
 #define _ASM_DELAY_H
 
+#include <linux/param.h>
+
 extern void __delay(unsigned int loops);
 extern void __ndelay(unsigned int ns);
 extern void __udelay(unsigned int us);
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 0f5caa1307f1..efeddc8db8b1 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -67,11 +67,15 @@ enum fixed_addresses {
  * the start of the fixmap, and leave one page empty
  * at the top of mem..
  */
+#ifdef CONFIG_BCM63XX
+#define FIXADDR_TOP     ((unsigned long)(long)(int)0xff000000)
+#else
 #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
 #define FIXADDR_TOP	((unsigned long)(long)(int)(0xff000000 - 0x20000))
 #else
 #define FIXADDR_TOP	((unsigned long)(long)(int)0xfffe0000)
 #endif
+#endif
 #define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
 #define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
 
diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h
index 90bf399e6dd9..c977a86c2c65 100644
--- a/arch/mips/include/asm/hardirq.h
+++ b/arch/mips/include/asm/hardirq.h
@@ -10,15 +10,9 @@
 #ifndef _ASM_HARDIRQ_H
 #define _ASM_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 extern void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif /* _ASM_HARDIRQ_H */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
index caeba1e302a2..a1ada1c27c16 100644
--- a/arch/mips/include/asm/lasat/lasat.h
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -227,6 +227,7 @@ extern void lasat_write_eeprom_info(void);
  * It is used for the bit-banging rtc and eeprom drivers */
 
 #include <linux/delay.h>
+#include <linux/smp.h>
 
 /* calculating with the slowest board with 100 MHz clock */
 #define LASAT_100_DIVIDER 20
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
index f96fd59e0845..361f4f16c30c 100644
--- a/arch/mips/include/asm/local.h
+++ b/arch/mips/include/asm/local.h
@@ -29,7 +29,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 {
 	unsigned long result;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
@@ -43,7 +43,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
 		: "Ir" (i), "m" (l->a.counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
@@ -74,7 +74,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 {
 	unsigned long result;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
@@ -88,7 +88,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
 		: "Ir" (i), "m" (l->a.counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 127d4ed9f073..feea00148b5d 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -578,6 +578,15 @@ static inline int irq_to_gpio(int irq)
 	return alchemy_irq_to_gpio(irq);
 }
 
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
 #endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
 
 
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
new file mode 100644
index 000000000000..fa3e7e617b09
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
@@ -0,0 +1,12 @@
+#ifndef BCM63XX_BOARD_H_
+#define BCM63XX_BOARD_H_
+
+const char *board_get_name(void);
+
+void board_prom_init(void);
+
+void board_setup(void);
+
+int board_register_devices(void);
+
+#endif /* ! BCM63XX_BOARD_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
new file mode 100644
index 000000000000..8fcf8df4418a
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
@@ -0,0 +1,11 @@
+#ifndef BCM63XX_CLK_H_
+#define BCM63XX_CLK_H_
+
+struct clk {
+	void		(*set)(struct clk *, int);
+	unsigned int	rate;
+	unsigned int	usage;
+	int		id;
+};
+
+#endif /* ! BCM63XX_CLK_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
new file mode 100644
index 000000000000..b12c4aca2cc9
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -0,0 +1,538 @@
+#ifndef BCM63XX_CPU_H_
+#define BCM63XX_CPU_H_
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+/*
+ * Macro to fetch bcm63xx cpu id and revision, should be optimized at
+ * compile time if only one CPU support is enabled (idea stolen from
+ * arm mach-types)
+ */
+#define BCM6338_CPU_ID		0x6338
+#define BCM6345_CPU_ID		0x6345
+#define BCM6348_CPU_ID		0x6348
+#define BCM6358_CPU_ID		0x6358
+
+void __init bcm63xx_cpu_init(void);
+u16 __bcm63xx_get_cpu_id(void);
+u16 bcm63xx_get_cpu_rev(void);
+unsigned int bcm63xx_get_cpu_freq(void);
+
+#ifdef CONFIG_BCM63XX_CPU_6338
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6338_CPU_ID
+# endif
+# define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+#else
+# define BCMCPU_IS_6338()	(0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6345
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6345_CPU_ID
+# endif
+# define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+#else
+# define BCMCPU_IS_6345()	(0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6348
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6348_CPU_ID
+# endif
+# define BCMCPU_IS_6348()	(bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
+#else
+# define BCMCPU_IS_6348()	(0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6358_CPU_ID
+# endif
+# define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+#else
+# define BCMCPU_IS_6358()	(0)
+#endif
+
+#ifndef bcm63xx_get_cpu_id
+#error "No CPU support configured"
+#endif
+
+/*
+ * While registers sets are (mostly) the same across 63xx CPU, base
+ * address of these sets do change.
+ */
+enum bcm63xx_regs_set {
+	RSET_DSL_LMEM = 0,
+	RSET_PERF,
+	RSET_TIMER,
+	RSET_WDT,
+	RSET_UART0,
+	RSET_GPIO,
+	RSET_SPI,
+	RSET_UDC0,
+	RSET_OHCI0,
+	RSET_OHCI_PRIV,
+	RSET_USBH_PRIV,
+	RSET_MPI,
+	RSET_PCMCIA,
+	RSET_DSL,
+	RSET_ENET0,
+	RSET_ENET1,
+	RSET_ENETDMA,
+	RSET_EHCI0,
+	RSET_SDRAM,
+	RSET_MEMC,
+	RSET_DDR,
+};
+
+#define RSET_DSL_LMEM_SIZE		(64 * 1024 * 4)
+#define RSET_DSL_SIZE			4096
+#define RSET_WDT_SIZE			12
+#define RSET_ENET_SIZE			2048
+#define RSET_ENETDMA_SIZE		2048
+#define RSET_UART_SIZE			24
+#define RSET_UDC_SIZE			256
+#define RSET_OHCI_SIZE			256
+#define RSET_EHCI_SIZE			256
+#define RSET_PCMCIA_SIZE		12
+
+/*
+ * 6338 register sets base address
+ */
+#define BCM_6338_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6338_PERF_BASE		(0xfffe0000)
+#define BCM_6338_BB_BASE		(0xfffe0100)
+#define BCM_6338_TIMER_BASE		(0xfffe0200)
+#define BCM_6338_WDT_BASE		(0xfffe021c)
+#define BCM_6338_UART0_BASE		(0xfffe0300)
+#define BCM_6338_GPIO_BASE		(0xfffe0400)
+#define BCM_6338_SPI_BASE		(0xfffe0c00)
+#define BCM_6338_UDC0_BASE		(0xdeadbeef)
+#define BCM_6338_USBDMA_BASE		(0xfffe2400)
+#define BCM_6338_OHCI0_BASE		(0xdeadbeef)
+#define BCM_6338_OHCI_PRIV_BASE		(0xfffe3000)
+#define BCM_6338_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_6338_MPI_BASE		(0xfffe3160)
+#define BCM_6338_PCMCIA_BASE		(0xdeadbeef)
+#define BCM_6338_SDRAM_REGS_BASE	(0xfffe3100)
+#define BCM_6338_DSL_BASE		(0xfffe1000)
+#define BCM_6338_SAR_BASE		(0xfffe2000)
+#define BCM_6338_UBUS_BASE		(0xdeadbeef)
+#define BCM_6338_ENET0_BASE		(0xfffe2800)
+#define BCM_6338_ENET1_BASE		(0xdeadbeef)
+#define BCM_6338_ENETDMA_BASE		(0xfffe2400)
+#define BCM_6338_EHCI0_BASE		(0xdeadbeef)
+#define BCM_6338_SDRAM_BASE		(0xfffe3100)
+#define BCM_6338_MEMC_BASE		(0xdeadbeef)
+#define BCM_6338_DDR_BASE		(0xdeadbeef)
+
+/*
+ * 6345 register sets base address
+ */
+#define BCM_6345_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6345_PERF_BASE		(0xfffe0000)
+#define BCM_6345_BB_BASE		(0xfffe0100)
+#define BCM_6345_TIMER_BASE		(0xfffe0200)
+#define BCM_6345_WDT_BASE		(0xfffe021c)
+#define BCM_6345_UART0_BASE		(0xfffe0300)
+#define BCM_6345_GPIO_BASE		(0xfffe0400)
+#define BCM_6345_SPI_BASE		(0xdeadbeef)
+#define BCM_6345_UDC0_BASE		(0xdeadbeef)
+#define BCM_6345_USBDMA_BASE		(0xfffe2800)
+#define BCM_6345_ENET0_BASE		(0xfffe1800)
+#define BCM_6345_ENETDMA_BASE		(0xfffe2800)
+#define BCM_6345_PCMCIA_BASE		(0xfffe2028)
+#define BCM_6345_MPI_BASE		(0xdeadbeef)
+#define BCM_6345_OHCI0_BASE		(0xfffe2100)
+#define BCM_6345_OHCI_PRIV_BASE		(0xfffe2200)
+#define BCM_6345_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_6345_SDRAM_REGS_BASE	(0xfffe2300)
+#define BCM_6345_DSL_BASE		(0xdeadbeef)
+#define BCM_6345_SAR_BASE		(0xdeadbeef)
+#define BCM_6345_UBUS_BASE		(0xdeadbeef)
+#define BCM_6345_ENET1_BASE		(0xdeadbeef)
+#define BCM_6345_EHCI0_BASE		(0xdeadbeef)
+#define BCM_6345_SDRAM_BASE		(0xfffe2300)
+#define BCM_6345_MEMC_BASE		(0xdeadbeef)
+#define BCM_6345_DDR_BASE		(0xdeadbeef)
+
+/*
+ * 6348 register sets base address
+ */
+#define BCM_6348_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6348_PERF_BASE		(0xfffe0000)
+#define BCM_6348_TIMER_BASE		(0xfffe0200)
+#define BCM_6348_WDT_BASE		(0xfffe021c)
+#define BCM_6348_UART0_BASE		(0xfffe0300)
+#define BCM_6348_GPIO_BASE		(0xfffe0400)
+#define BCM_6348_SPI_BASE		(0xfffe0c00)
+#define BCM_6348_UDC0_BASE		(0xfffe1000)
+#define BCM_6348_OHCI0_BASE		(0xfffe1b00)
+#define BCM_6348_OHCI_PRIV_BASE		(0xfffe1c00)
+#define BCM_6348_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_6348_MPI_BASE		(0xfffe2000)
+#define BCM_6348_PCMCIA_BASE		(0xfffe2054)
+#define BCM_6348_SDRAM_REGS_BASE	(0xfffe2300)
+#define BCM_6348_DSL_BASE		(0xfffe3000)
+#define BCM_6348_ENET0_BASE		(0xfffe6000)
+#define BCM_6348_ENET1_BASE		(0xfffe6800)
+#define BCM_6348_ENETDMA_BASE		(0xfffe7000)
+#define BCM_6348_EHCI0_BASE		(0xdeadbeef)
+#define BCM_6348_SDRAM_BASE		(0xfffe2300)
+#define BCM_6348_MEMC_BASE		(0xdeadbeef)
+#define BCM_6348_DDR_BASE		(0xdeadbeef)
+
+/*
+ * 6358 register sets base address
+ */
+#define BCM_6358_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6358_PERF_BASE		(0xfffe0000)
+#define BCM_6358_TIMER_BASE		(0xfffe0040)
+#define BCM_6358_WDT_BASE		(0xfffe005c)
+#define BCM_6358_UART0_BASE		(0xfffe0100)
+#define BCM_6358_GPIO_BASE		(0xfffe0080)
+#define BCM_6358_SPI_BASE		(0xdeadbeef)
+#define BCM_6358_UDC0_BASE		(0xfffe0800)
+#define BCM_6358_OHCI0_BASE		(0xfffe1400)
+#define BCM_6358_OHCI_PRIV_BASE		(0xdeadbeef)
+#define BCM_6358_USBH_PRIV_BASE		(0xfffe1500)
+#define BCM_6358_MPI_BASE		(0xfffe1000)
+#define BCM_6358_PCMCIA_BASE		(0xfffe1054)
+#define BCM_6358_SDRAM_REGS_BASE	(0xfffe2300)
+#define BCM_6358_DSL_BASE		(0xfffe3000)
+#define BCM_6358_ENET0_BASE		(0xfffe4000)
+#define BCM_6358_ENET1_BASE		(0xfffe4800)
+#define BCM_6358_ENETDMA_BASE		(0xfffe5000)
+#define BCM_6358_EHCI0_BASE		(0xfffe1300)
+#define BCM_6358_SDRAM_BASE		(0xdeadbeef)
+#define BCM_6358_MEMC_BASE		(0xfffe1200)
+#define BCM_6358_DDR_BASE		(0xfffe12a0)
+
+
+extern const unsigned long *bcm63xx_regs_base;
+
+static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
+{
+#ifdef BCMCPU_RUNTIME_DETECT
+	return bcm63xx_regs_base[set];
+#else
+#ifdef CONFIG_BCM63XX_CPU_6338
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6338_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6338_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6338_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6338_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6338_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6338_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6338_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6338_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6338_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6338_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6338_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6338_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6338_PCMCIA_BASE;
+	case RSET_DSL:
+		return BCM_6338_DSL_BASE;
+	case RSET_ENET0:
+		return BCM_6338_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6338_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6338_ENETDMA_BASE;
+	case RSET_EHCI0:
+		return BCM_6338_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6338_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6338_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6338_DDR_BASE;
+	}
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6345_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6345_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6345_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6345_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6345_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6345_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6345_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6345_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6345_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6345_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6345_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6345_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6345_PCMCIA_BASE;
+	case RSET_DSL:
+		return BCM_6345_DSL_BASE;
+	case RSET_ENET0:
+		return BCM_6345_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6345_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6345_ENETDMA_BASE;
+	case RSET_EHCI0:
+		return BCM_6345_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6345_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6345_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6345_DDR_BASE;
+	}
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6348_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6348_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6348_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6348_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6348_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6348_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6348_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6348_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6348_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6348_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6348_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6348_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6348_PCMCIA_BASE;
+	case RSET_DSL:
+		return BCM_6348_DSL_BASE;
+	case RSET_ENET0:
+		return BCM_6348_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6348_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6348_ENETDMA_BASE;
+	case RSET_EHCI0:
+		return BCM_6348_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6348_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6348_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6348_DDR_BASE;
+	}
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6358
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6358_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6358_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6358_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6358_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6358_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6358_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6358_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6358_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6358_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6358_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6358_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6358_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6358_PCMCIA_BASE;
+	case RSET_ENET0:
+		return BCM_6358_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6358_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6358_ENETDMA_BASE;
+	case RSET_DSL:
+		return BCM_6358_DSL_BASE;
+	case RSET_EHCI0:
+		return BCM_6358_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6358_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6358_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6358_DDR_BASE;
+	}
+#endif
+#endif
+	/* unreached */
+	return 0;
+}
+
+/*
+ * IRQ number changes across CPU too
+ */
+enum bcm63xx_irq {
+	IRQ_TIMER = 0,
+	IRQ_UART0,
+	IRQ_DSL,
+	IRQ_ENET0,
+	IRQ_ENET1,
+	IRQ_ENET_PHY,
+	IRQ_OHCI0,
+	IRQ_EHCI0,
+	IRQ_PCMCIA0,
+	IRQ_ENET0_RXDMA,
+	IRQ_ENET0_TXDMA,
+	IRQ_ENET1_RXDMA,
+	IRQ_ENET1_TXDMA,
+	IRQ_PCI,
+	IRQ_PCMCIA,
+};
+
+/*
+ * 6338 irqs
+ */
+#define BCM_6338_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6338_SPI_IRQ		(IRQ_INTERNAL_BASE + 1)
+#define BCM_6338_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6338_DG_IRQ			(IRQ_INTERNAL_BASE + 4)
+#define BCM_6338_DSL_IRQ		(IRQ_INTERNAL_BASE + 5)
+#define BCM_6338_ATM_IRQ		(IRQ_INTERNAL_BASE + 6)
+#define BCM_6338_UDC0_IRQ		(IRQ_INTERNAL_BASE + 7)
+#define BCM_6338_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6338_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_SDRAM_IRQ		(IRQ_INTERNAL_BASE + 10)
+#define BCM_6338_USB_CNTL_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 11)
+#define BCM_6338_USB_CNTL_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 12)
+#define BCM_6338_USB_BULK_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13)
+#define BCM_6338_USB_BULK_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 14)
+#define BCM_6338_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 15)
+#define BCM_6338_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 16)
+#define BCM_6338_SDIO_IRQ		(IRQ_INTERNAL_BASE + 17)
+
+/*
+ * 6345 irqs
+ */
+#define BCM_6345_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6345_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6345_DSL_IRQ		(IRQ_INTERNAL_BASE + 3)
+#define BCM_6345_ATM_IRQ		(IRQ_INTERNAL_BASE + 4)
+#define BCM_6345_USB_IRQ		(IRQ_INTERNAL_BASE + 5)
+#define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 1)
+#define BCM_6345_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 2)
+#define BCM_6345_EBI_RX_IRQ		(IRQ_INTERNAL_BASE + 13 + 5)
+#define BCM_6345_EBI_TX_IRQ		(IRQ_INTERNAL_BASE + 13 + 6)
+#define BCM_6345_RESERVED_RX_IRQ	(IRQ_INTERNAL_BASE + 13 + 9)
+#define BCM_6345_RESERVED_TX_IRQ	(IRQ_INTERNAL_BASE + 13 + 10)
+#define BCM_6345_USB_BULK_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 13)
+#define BCM_6345_USB_BULK_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 14)
+#define BCM_6345_USB_CNTL_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 15)
+#define BCM_6345_USB_CNTL_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 16)
+#define BCM_6345_USB_ISO_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 17)
+#define BCM_6345_USB_ISO_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 18)
+
+/*
+ * 6348 irqs
+ */
+#define BCM_6348_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6348_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6348_DSL_IRQ		(IRQ_INTERNAL_BASE + 4)
+#define BCM_6348_ENET1_IRQ		(IRQ_INTERNAL_BASE + 7)
+#define BCM_6348_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6348_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6348_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6348_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 20)
+#define BCM_6348_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 21)
+#define BCM_6348_ENET1_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 22)
+#define BCM_6348_ENET1_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 23)
+#define BCM_6348_PCMCIA_IRQ		(IRQ_INTERNAL_BASE + 24)
+#define BCM_6348_PCI_IRQ		(IRQ_INTERNAL_BASE + 24)
+
+/*
+ * 6358 irqs
+ */
+#define BCM_6358_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6358_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
+#define BCM_6358_ENET1_IRQ		(IRQ_INTERNAL_BASE + 6)
+#define BCM_6358_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6358_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6358_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
+#define BCM_6358_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 15)
+#define BCM_6358_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 16)
+#define BCM_6358_ENET1_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 17)
+#define BCM_6358_ENET1_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 18)
+#define BCM_6358_DSL_IRQ		(IRQ_INTERNAL_BASE + 29)
+#define BCM_6358_PCI_IRQ		(IRQ_INTERNAL_BASE + 31)
+#define BCM_6358_PCMCIA_IRQ		(IRQ_INTERNAL_BASE + 24)
+
+extern const int *bcm63xx_irqs;
+
+static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq)
+{
+	return bcm63xx_irqs[irq];
+}
+
+/*
+ * return installed memory size
+ */
+unsigned int bcm63xx_get_memory_size(void);
+
+#endif /* !BCM63XX_CPU_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
new file mode 100644
index 000000000000..b1821c866e53
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
@@ -0,0 +1,10 @@
+#ifndef BCM63XX_CS_H
+#define BCM63XX_CS_H
+
+int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size);
+int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
+			   unsigned int setup, unsigned int hold);
+int bcm63xx_set_cs_param(unsigned int cs, u32 flags);
+int bcm63xx_set_cs_status(unsigned int cs, int enable);
+
+#endif /* !BCM63XX_CS_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
new file mode 100644
index 000000000000..b587d45c3045
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
@@ -0,0 +1,13 @@
+#ifndef __BCM63XX_DSP_H
+#define __BCM63XX_DSP_H
+
+struct bcm63xx_dsp_platform_data {
+	unsigned gpio_rst;
+	unsigned gpio_int;
+	unsigned cs;
+	unsigned ext_irq;
+};
+
+int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd);
+
+#endif /* __BCM63XX_DSP_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
new file mode 100644
index 000000000000..d53f611184b9
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
@@ -0,0 +1,45 @@
+#ifndef BCM63XX_DEV_ENET_H_
+#define BCM63XX_DEV_ENET_H_
+
+#include <linux/if_ether.h>
+#include <linux/init.h>
+
+/*
+ * on board ethernet platform data
+ */
+struct bcm63xx_enet_platform_data {
+	char mac_addr[ETH_ALEN];
+
+	int has_phy;
+
+	/* if has_phy, then set use_internal_phy */
+	int use_internal_phy;
+
+	/* or fill phy info to use an external one */
+	int phy_id;
+	int has_phy_interrupt;
+	int phy_interrupt;
+
+	/* if has_phy, use autonegociated pause parameters or force
+	 * them */
+	int pause_auto;
+	int pause_rx;
+	int pause_tx;
+
+	/* if !has_phy, set desired forced speed/duplex */
+	int force_speed_100;
+	int force_duplex_full;
+
+	/* if !has_phy, set callback to perform mii device
+	 * init/remove */
+	int (*mii_config)(struct net_device *dev, int probe,
+			  int (*mii_read)(struct net_device *dev,
+					  int phy_id, int reg),
+			  void (*mii_write)(struct net_device *dev,
+					    int phy_id, int reg, int val));
+};
+
+int __init bcm63xx_enet_register(int unit,
+				 const struct bcm63xx_enet_platform_data *pd);
+
+#endif /* ! BCM63XX_DEV_ENET_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
new file mode 100644
index 000000000000..c549344b70ad
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_PCI_H_
+#define BCM63XX_DEV_PCI_H_
+
+extern int bcm63xx_pci_enabled;
+
+#endif /* BCM63XX_DEV_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
new file mode 100644
index 000000000000..76a0b7216af5
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -0,0 +1,22 @@
+#ifndef BCM63XX_GPIO_H
+#define BCM63XX_GPIO_H
+
+#include <linux/init.h>
+
+int __init bcm63xx_gpio_init(void);
+
+static inline unsigned long bcm63xx_gpio_count(void)
+{
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6358_CPU_ID:
+		return 40;
+	case BCM6348_CPU_ID:
+	default:
+		return 37;
+	}
+}
+
+#define GPIO_DIR_OUT	0x0
+#define GPIO_DIR_IN	0x1
+
+#endif /* !BCM63XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
new file mode 100644
index 000000000000..91180fac6ed9
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
@@ -0,0 +1,93 @@
+#ifndef BCM63XX_IO_H_
+#define BCM63XX_IO_H_
+
+#include "bcm63xx_cpu.h"
+
+/*
+ * Physical memory map, RAM is mapped at 0x0.
+ *
+ * Note that size MUST be a power of two.
+ */
+#define BCM_PCMCIA_COMMON_BASE_PA	(0x20000000)
+#define BCM_PCMCIA_COMMON_SIZE		(16 * 1024 * 1024)
+#define BCM_PCMCIA_COMMON_END_PA	(BCM_PCMCIA_COMMON_BASE_PA +	\
+					 BCM_PCMCIA_COMMON_SIZE - 1)
+
+#define BCM_PCMCIA_ATTR_BASE_PA		(0x21000000)
+#define BCM_PCMCIA_ATTR_SIZE		(16 * 1024 * 1024)
+#define BCM_PCMCIA_ATTR_END_PA		(BCM_PCMCIA_ATTR_BASE_PA +	\
+					 BCM_PCMCIA_ATTR_SIZE - 1)
+
+#define BCM_PCMCIA_IO_BASE_PA		(0x22000000)
+#define BCM_PCMCIA_IO_SIZE		(64 * 1024)
+#define BCM_PCMCIA_IO_END_PA		(BCM_PCMCIA_IO_BASE_PA +	\
+					BCM_PCMCIA_IO_SIZE - 1)
+
+#define BCM_PCI_MEM_BASE_PA		(0x30000000)
+#define BCM_PCI_MEM_SIZE		(128 * 1024 * 1024)
+#define BCM_PCI_MEM_END_PA		(BCM_PCI_MEM_BASE_PA +		\
+					BCM_PCI_MEM_SIZE - 1)
+
+#define BCM_PCI_IO_BASE_PA		(0x08000000)
+#define BCM_PCI_IO_SIZE			(64 * 1024)
+#define BCM_PCI_IO_END_PA		(BCM_PCI_IO_BASE_PA +		\
+					BCM_PCI_IO_SIZE - 1)
+#define BCM_PCI_IO_HALF_PA		(BCM_PCI_IO_BASE_PA +		\
+					(BCM_PCI_IO_SIZE / 2) - 1)
+
+#define BCM_CB_MEM_BASE_PA		(0x38000000)
+#define BCM_CB_MEM_SIZE			(128 * 1024 * 1024)
+#define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
+					BCM_CB_MEM_SIZE - 1)
+
+
+/*
+ * Internal registers are accessed through KSEG3
+ */
+#define BCM_REGS_VA(x)	((void __iomem *)(x))
+
+#define bcm_readb(a)	(*(volatile unsigned char *)	BCM_REGS_VA(a))
+#define bcm_readw(a)	(*(volatile unsigned short *)	BCM_REGS_VA(a))
+#define bcm_readl(a)	(*(volatile unsigned int *)	BCM_REGS_VA(a))
+#define bcm_writeb(v, a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v))
+#define bcm_writew(v, a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v))
+#define bcm_writel(v, a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v))
+
+/*
+ * IO helpers to access register set for current CPU
+ */
+#define bcm_rset_readb(s, o)	bcm_readb(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_readw(s, o)	bcm_readw(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_readl(s, o)	bcm_readl(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writeb(s, v, o)	bcm_writeb((v), \
+					bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writew(s, v, o)	bcm_writew((v), \
+					bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writel(s, v, o)	bcm_writel((v), \
+					bcm63xx_regset_address(s) + (o))
+
+/*
+ * helpers for frequently used register sets
+ */
+#define bcm_perf_readl(o)	bcm_rset_readl(RSET_PERF, (o))
+#define bcm_perf_writel(v, o)	bcm_rset_writel(RSET_PERF, (v), (o))
+#define bcm_timer_readl(o)	bcm_rset_readl(RSET_TIMER, (o))
+#define bcm_timer_writel(v, o)	bcm_rset_writel(RSET_TIMER, (v), (o))
+#define bcm_wdt_readl(o)	bcm_rset_readl(RSET_WDT, (o))
+#define bcm_wdt_writel(v, o)	bcm_rset_writel(RSET_WDT, (v), (o))
+#define bcm_gpio_readl(o)	bcm_rset_readl(RSET_GPIO, (o))
+#define bcm_gpio_writel(v, o)	bcm_rset_writel(RSET_GPIO, (v), (o))
+#define bcm_uart0_readl(o)	bcm_rset_readl(RSET_UART0, (o))
+#define bcm_uart0_writel(v, o)	bcm_rset_writel(RSET_UART0, (v), (o))
+#define bcm_mpi_readl(o)	bcm_rset_readl(RSET_MPI, (o))
+#define bcm_mpi_writel(v, o)	bcm_rset_writel(RSET_MPI, (v), (o))
+#define bcm_pcmcia_readl(o)	bcm_rset_readl(RSET_PCMCIA, (o))
+#define bcm_pcmcia_writel(v, o)	bcm_rset_writel(RSET_PCMCIA, (v), (o))
+#define bcm_sdram_readl(o)	bcm_rset_readl(RSET_SDRAM, (o))
+#define bcm_sdram_writel(v, o)	bcm_rset_writel(RSET_SDRAM, (v), (o))
+#define bcm_memc_readl(o)	bcm_rset_readl(RSET_MEMC, (o))
+#define bcm_memc_writel(v, o)	bcm_rset_writel(RSET_MEMC, (v), (o))
+#define bcm_ddr_readl(o)	bcm_rset_readl(RSET_DDR, (o))
+#define bcm_ddr_writel(v, o)	bcm_rset_writel(RSET_DDR, (v), (o))
+
+#endif /* ! BCM63XX_IO_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
new file mode 100644
index 000000000000..5f95577c8213
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
@@ -0,0 +1,15 @@
+#ifndef BCM63XX_IRQ_H_
+#define BCM63XX_IRQ_H_
+
+#include <bcm63xx_cpu.h>
+
+#define IRQ_MIPS_BASE			0
+#define IRQ_INTERNAL_BASE		8
+
+#define IRQ_EXT_BASE			(IRQ_MIPS_BASE + 3)
+#define IRQ_EXT_0			(IRQ_EXT_BASE + 0)
+#define IRQ_EXT_1			(IRQ_EXT_BASE + 1)
+#define IRQ_EXT_2			(IRQ_EXT_BASE + 2)
+#define IRQ_EXT_3			(IRQ_EXT_BASE + 3)
+
+#endif /* ! BCM63XX_IRQ_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
new file mode 100644
index 000000000000..ed4ccec87dd4
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -0,0 +1,773 @@
+#ifndef BCM63XX_REGS_H_
+#define BCM63XX_REGS_H_
+
+/*************************************************************************
+ * _REG relative to RSET_PERF
+ *************************************************************************/
+
+/* Chip Identifier / Revision register */
+#define PERF_REV_REG			0x0
+#define REV_CHIPID_SHIFT		16
+#define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
+#define REV_REVID_SHIFT			0
+#define REV_REVID_MASK			(0xffff << REV_REVID_SHIFT)
+
+/* Clock Control register */
+#define PERF_CKCTL_REG			0x4
+
+#define CKCTL_6338_ADSLPHY_EN		(1 << 0)
+#define CKCTL_6338_MPI_EN		(1 << 1)
+#define CKCTL_6338_DRAM_EN		(1 << 2)
+#define CKCTL_6338_ENET_EN		(1 << 4)
+#define CKCTL_6338_USBS_EN		(1 << 4)
+#define CKCTL_6338_SAR_EN		(1 << 5)
+#define CKCTL_6338_SPI_EN		(1 << 9)
+
+#define CKCTL_6338_ALL_SAFE_EN		(CKCTL_6338_ADSLPHY_EN |	\
+					CKCTL_6338_MPI_EN |		\
+					CKCTL_6338_ENET_EN |		\
+					CKCTL_6338_SAR_EN |		\
+					CKCTL_6338_SPI_EN)
+
+#define CKCTL_6345_CPU_EN		(1 << 0)
+#define CKCTL_6345_BUS_EN		(1 << 1)
+#define CKCTL_6345_EBI_EN		(1 << 2)
+#define CKCTL_6345_UART_EN		(1 << 3)
+#define CKCTL_6345_ADSLPHY_EN		(1 << 4)
+#define CKCTL_6345_ENET_EN		(1 << 7)
+#define CKCTL_6345_USBH_EN		(1 << 8)
+
+#define CKCTL_6345_ALL_SAFE_EN		(CKCTL_6345_ENET_EN |	\
+					CKCTL_6345_USBH_EN |	\
+					CKCTL_6345_ADSLPHY_EN)
+
+#define CKCTL_6348_ADSLPHY_EN		(1 << 0)
+#define CKCTL_6348_MPI_EN		(1 << 1)
+#define CKCTL_6348_SDRAM_EN		(1 << 2)
+#define CKCTL_6348_M2M_EN		(1 << 3)
+#define CKCTL_6348_ENET_EN		(1 << 4)
+#define CKCTL_6348_SAR_EN		(1 << 5)
+#define CKCTL_6348_USBS_EN		(1 << 6)
+#define CKCTL_6348_USBH_EN		(1 << 8)
+#define CKCTL_6348_SPI_EN		(1 << 9)
+
+#define CKCTL_6348_ALL_SAFE_EN		(CKCTL_6348_ADSLPHY_EN |	\
+					CKCTL_6348_M2M_EN |		\
+					CKCTL_6348_ENET_EN |		\
+					CKCTL_6348_SAR_EN |		\
+					CKCTL_6348_USBS_EN |		\
+					CKCTL_6348_USBH_EN |		\
+					CKCTL_6348_SPI_EN)
+
+#define CKCTL_6358_ENET_EN		(1 << 4)
+#define CKCTL_6358_ADSLPHY_EN		(1 << 5)
+#define CKCTL_6358_PCM_EN		(1 << 8)
+#define CKCTL_6358_SPI_EN		(1 << 9)
+#define CKCTL_6358_USBS_EN		(1 << 10)
+#define CKCTL_6358_SAR_EN		(1 << 11)
+#define CKCTL_6358_EMUSB_EN		(1 << 17)
+#define CKCTL_6358_ENET0_EN		(1 << 18)
+#define CKCTL_6358_ENET1_EN		(1 << 19)
+#define CKCTL_6358_USBSU_EN		(1 << 20)
+#define CKCTL_6358_EPHY_EN		(1 << 21)
+
+#define CKCTL_6358_ALL_SAFE_EN		(CKCTL_6358_ENET_EN |		\
+					CKCTL_6358_ADSLPHY_EN |		\
+					CKCTL_6358_PCM_EN |		\
+					CKCTL_6358_SPI_EN |		\
+					CKCTL_6358_USBS_EN |		\
+					CKCTL_6358_SAR_EN |		\
+					CKCTL_6358_EMUSB_EN |		\
+					CKCTL_6358_ENET0_EN |		\
+					CKCTL_6358_ENET1_EN |		\
+					CKCTL_6358_USBSU_EN |		\
+					CKCTL_6358_EPHY_EN)
+
+/* System PLL Control register  */
+#define PERF_SYS_PLL_CTL_REG		0x8
+#define SYS_PLL_SOFT_RESET		0x1
+
+/* Interrupt Mask register */
+#define PERF_IRQMASK_REG		0xc
+#define PERF_IRQSTAT_REG		0x10
+
+/* Interrupt Status register */
+#define PERF_IRQSTAT_REG		0x10
+
+/* External Interrupt Configuration register */
+#define PERF_EXTIRQ_CFG_REG		0x14
+#define EXTIRQ_CFG_SENSE(x)		(1 << (x))
+#define EXTIRQ_CFG_STAT(x)		(1 << (x + 5))
+#define EXTIRQ_CFG_CLEAR(x)		(1 << (x + 10))
+#define EXTIRQ_CFG_MASK(x)		(1 << (x + 15))
+#define EXTIRQ_CFG_BOTHEDGE(x)		(1 << (x + 20))
+#define EXTIRQ_CFG_LEVELSENSE(x)	(1 << (x + 25))
+
+#define EXTIRQ_CFG_CLEAR_ALL		(0xf << 10)
+#define EXTIRQ_CFG_MASK_ALL		(0xf << 15)
+
+/* Soft Reset register */
+#define PERF_SOFTRESET_REG		0x28
+
+#define SOFTRESET_6338_SPI_MASK		(1 << 0)
+#define SOFTRESET_6338_ENET_MASK	(1 << 2)
+#define SOFTRESET_6338_USBH_MASK	(1 << 3)
+#define SOFTRESET_6338_USBS_MASK	(1 << 4)
+#define SOFTRESET_6338_ADSL_MASK	(1 << 5)
+#define SOFTRESET_6338_DMAMEM_MASK	(1 << 6)
+#define SOFTRESET_6338_SAR_MASK		(1 << 7)
+#define SOFTRESET_6338_ACLC_MASK	(1 << 8)
+#define SOFTRESET_6338_ADSLMIPSPLL_MASK	(1 << 10)
+#define SOFTRESET_6338_ALL	 (SOFTRESET_6338_SPI_MASK |		\
+				  SOFTRESET_6338_ENET_MASK |		\
+				  SOFTRESET_6338_USBH_MASK |		\
+				  SOFTRESET_6338_USBS_MASK |		\
+				  SOFTRESET_6338_ADSL_MASK |		\
+				  SOFTRESET_6338_DMAMEM_MASK |		\
+				  SOFTRESET_6338_SAR_MASK |		\
+				  SOFTRESET_6338_ACLC_MASK |		\
+				  SOFTRESET_6338_ADSLMIPSPLL_MASK)
+
+#define SOFTRESET_6348_SPI_MASK		(1 << 0)
+#define SOFTRESET_6348_ENET_MASK	(1 << 2)
+#define SOFTRESET_6348_USBH_MASK	(1 << 3)
+#define SOFTRESET_6348_USBS_MASK	(1 << 4)
+#define SOFTRESET_6348_ADSL_MASK	(1 << 5)
+#define SOFTRESET_6348_DMAMEM_MASK	(1 << 6)
+#define SOFTRESET_6348_SAR_MASK		(1 << 7)
+#define SOFTRESET_6348_ACLC_MASK	(1 << 8)
+#define SOFTRESET_6348_ADSLMIPSPLL_MASK	(1 << 10)
+
+#define SOFTRESET_6348_ALL	 (SOFTRESET_6348_SPI_MASK |		\
+				  SOFTRESET_6348_ENET_MASK |		\
+				  SOFTRESET_6348_USBH_MASK |		\
+				  SOFTRESET_6348_USBS_MASK |		\
+				  SOFTRESET_6348_ADSL_MASK |		\
+				  SOFTRESET_6348_DMAMEM_MASK |		\
+				  SOFTRESET_6348_SAR_MASK |		\
+				  SOFTRESET_6348_ACLC_MASK |		\
+				  SOFTRESET_6348_ADSLMIPSPLL_MASK)
+
+/* MIPS PLL control register */
+#define PERF_MIPSPLLCTL_REG		0x34
+#define MIPSPLLCTL_N1_SHIFT		20
+#define MIPSPLLCTL_N1_MASK		(0x7 << MIPSPLLCTL_N1_SHIFT)
+#define MIPSPLLCTL_N2_SHIFT		15
+#define MIPSPLLCTL_N2_MASK		(0x1f << MIPSPLLCTL_N2_SHIFT)
+#define MIPSPLLCTL_M1REF_SHIFT		12
+#define MIPSPLLCTL_M1REF_MASK		(0x7 << MIPSPLLCTL_M1REF_SHIFT)
+#define MIPSPLLCTL_M2REF_SHIFT		9
+#define MIPSPLLCTL_M2REF_MASK		(0x7 << MIPSPLLCTL_M2REF_SHIFT)
+#define MIPSPLLCTL_M1CPU_SHIFT		6
+#define MIPSPLLCTL_M1CPU_MASK		(0x7 << MIPSPLLCTL_M1CPU_SHIFT)
+#define MIPSPLLCTL_M1BUS_SHIFT		3
+#define MIPSPLLCTL_M1BUS_MASK		(0x7 << MIPSPLLCTL_M1BUS_SHIFT)
+#define MIPSPLLCTL_M2BUS_SHIFT		0
+#define MIPSPLLCTL_M2BUS_MASK		(0x7 << MIPSPLLCTL_M2BUS_SHIFT)
+
+/* ADSL PHY PLL Control register */
+#define PERF_ADSLPLLCTL_REG		0x38
+#define ADSLPLLCTL_N1_SHIFT		20
+#define ADSLPLLCTL_N1_MASK		(0x7 << ADSLPLLCTL_N1_SHIFT)
+#define ADSLPLLCTL_N2_SHIFT		15
+#define ADSLPLLCTL_N2_MASK		(0x1f << ADSLPLLCTL_N2_SHIFT)
+#define ADSLPLLCTL_M1REF_SHIFT		12
+#define ADSLPLLCTL_M1REF_MASK		(0x7 << ADSLPLLCTL_M1REF_SHIFT)
+#define ADSLPLLCTL_M2REF_SHIFT		9
+#define ADSLPLLCTL_M2REF_MASK		(0x7 << ADSLPLLCTL_M2REF_SHIFT)
+#define ADSLPLLCTL_M1CPU_SHIFT		6
+#define ADSLPLLCTL_M1CPU_MASK		(0x7 << ADSLPLLCTL_M1CPU_SHIFT)
+#define ADSLPLLCTL_M1BUS_SHIFT		3
+#define ADSLPLLCTL_M1BUS_MASK		(0x7 << ADSLPLLCTL_M1BUS_SHIFT)
+#define ADSLPLLCTL_M2BUS_SHIFT		0
+#define ADSLPLLCTL_M2BUS_MASK		(0x7 << ADSLPLLCTL_M2BUS_SHIFT)
+
+#define ADSLPLLCTL_VAL(n1, n2, m1ref, m2ref, m1cpu, m1bus, m2bus)	\
+				(((n1) << ADSLPLLCTL_N1_SHIFT) |	\
+				((n2) << ADSLPLLCTL_N2_SHIFT) |		\
+				((m1ref) << ADSLPLLCTL_M1REF_SHIFT) |	\
+				((m2ref) << ADSLPLLCTL_M2REF_SHIFT) |	\
+				((m1cpu) << ADSLPLLCTL_M1CPU_SHIFT) |	\
+				((m1bus) << ADSLPLLCTL_M1BUS_SHIFT) |	\
+				((m2bus) << ADSLPLLCTL_M2BUS_SHIFT))
+
+
+/*************************************************************************
+ * _REG relative to RSET_TIMER
+ *************************************************************************/
+
+#define BCM63XX_TIMER_COUNT		4
+#define TIMER_T0_ID			0
+#define TIMER_T1_ID			1
+#define TIMER_T2_ID			2
+#define TIMER_WDT_ID			3
+
+/* Timer irqstat register */
+#define TIMER_IRQSTAT_REG		0
+#define TIMER_IRQSTAT_TIMER_CAUSE(x)	(1 << (x))
+#define TIMER_IRQSTAT_TIMER0_CAUSE	(1 << 0)
+#define TIMER_IRQSTAT_TIMER1_CAUSE	(1 << 1)
+#define TIMER_IRQSTAT_TIMER2_CAUSE	(1 << 2)
+#define TIMER_IRQSTAT_WDT_CAUSE		(1 << 3)
+#define TIMER_IRQSTAT_TIMER_IR_EN(x)	(1 << ((x) + 8))
+#define TIMER_IRQSTAT_TIMER0_IR_EN	(1 << 8)
+#define TIMER_IRQSTAT_TIMER1_IR_EN	(1 << 9)
+#define TIMER_IRQSTAT_TIMER2_IR_EN	(1 << 10)
+
+/* Timer control register */
+#define TIMER_CTLx_REG(x)		(0x4 + (x * 4))
+#define TIMER_CTL0_REG			0x4
+#define TIMER_CTL1_REG			0x8
+#define TIMER_CTL2_REG			0xC
+#define TIMER_CTL_COUNTDOWN_MASK	(0x3fffffff)
+#define TIMER_CTL_MONOTONIC_MASK	(1 << 30)
+#define TIMER_CTL_ENABLE_MASK		(1 << 31)
+
+
+/*************************************************************************
+ * _REG relative to RSET_WDT
+ *************************************************************************/
+
+/* Watchdog default count register */
+#define WDT_DEFVAL_REG			0x0
+
+/* Watchdog control register */
+#define WDT_CTL_REG			0x4
+
+/* Watchdog control register constants */
+#define WDT_START_1			(0xff00)
+#define WDT_START_2			(0x00ff)
+#define WDT_STOP_1			(0xee00)
+#define WDT_STOP_2			(0x00ee)
+
+/* Watchdog reset length register */
+#define WDT_RSTLEN_REG			0x8
+
+
+/*************************************************************************
+ * _REG relative to RSET_UARTx
+ *************************************************************************/
+
+/* UART Control Register */
+#define UART_CTL_REG			0x0
+#define UART_CTL_RXTMOUTCNT_SHIFT	0
+#define UART_CTL_RXTMOUTCNT_MASK	(0x1f << UART_CTL_RXTMOUTCNT_SHIFT)
+#define UART_CTL_RSTTXDN_SHIFT		5
+#define UART_CTL_RSTTXDN_MASK		(1 << UART_CTL_RSTTXDN_SHIFT)
+#define UART_CTL_RSTRXFIFO_SHIFT		6
+#define UART_CTL_RSTRXFIFO_MASK		(1 << UART_CTL_RSTRXFIFO_SHIFT)
+#define UART_CTL_RSTTXFIFO_SHIFT		7
+#define UART_CTL_RSTTXFIFO_MASK		(1 << UART_CTL_RSTTXFIFO_SHIFT)
+#define UART_CTL_STOPBITS_SHIFT		8
+#define UART_CTL_STOPBITS_MASK		(0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_1		(0x7 << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_2		(0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_BITSPERSYM_SHIFT	12
+#define UART_CTL_BITSPERSYM_MASK	(0x3 << UART_CTL_BITSPERSYM_SHIFT)
+#define UART_CTL_XMITBRK_SHIFT		14
+#define UART_CTL_XMITBRK_MASK		(1 << UART_CTL_XMITBRK_SHIFT)
+#define UART_CTL_RSVD_SHIFT		15
+#define UART_CTL_RSVD_MASK		(1 << UART_CTL_RSVD_SHIFT)
+#define UART_CTL_RXPAREVEN_SHIFT		16
+#define UART_CTL_RXPAREVEN_MASK		(1 << UART_CTL_RXPAREVEN_SHIFT)
+#define UART_CTL_RXPAREN_SHIFT		17
+#define UART_CTL_RXPAREN_MASK		(1 << UART_CTL_RXPAREN_SHIFT)
+#define UART_CTL_TXPAREVEN_SHIFT		18
+#define UART_CTL_TXPAREVEN_MASK		(1 << UART_CTL_TXPAREVEN_SHIFT)
+#define UART_CTL_TXPAREN_SHIFT		18
+#define UART_CTL_TXPAREN_MASK		(1 << UART_CTL_TXPAREN_SHIFT)
+#define UART_CTL_LOOPBACK_SHIFT		20
+#define UART_CTL_LOOPBACK_MASK		(1 << UART_CTL_LOOPBACK_SHIFT)
+#define UART_CTL_RXEN_SHIFT		21
+#define UART_CTL_RXEN_MASK		(1 << UART_CTL_RXEN_SHIFT)
+#define UART_CTL_TXEN_SHIFT		22
+#define UART_CTL_TXEN_MASK		(1 << UART_CTL_TXEN_SHIFT)
+#define UART_CTL_BRGEN_SHIFT		23
+#define UART_CTL_BRGEN_MASK		(1 << UART_CTL_BRGEN_SHIFT)
+
+/* UART Baudword register */
+#define UART_BAUD_REG			0x4
+
+/* UART Misc Control register */
+#define UART_MCTL_REG			0x8
+#define UART_MCTL_DTR_SHIFT		0
+#define UART_MCTL_DTR_MASK		(1 << UART_MCTL_DTR_SHIFT)
+#define UART_MCTL_RTS_SHIFT		1
+#define UART_MCTL_RTS_MASK		(1 << UART_MCTL_RTS_SHIFT)
+#define UART_MCTL_RXFIFOTHRESH_SHIFT	8
+#define UART_MCTL_RXFIFOTHRESH_MASK	(0xf << UART_MCTL_RXFIFOTHRESH_SHIFT)
+#define UART_MCTL_TXFIFOTHRESH_SHIFT	12
+#define UART_MCTL_TXFIFOTHRESH_MASK	(0xf << UART_MCTL_TXFIFOTHRESH_SHIFT)
+#define UART_MCTL_RXFIFOFILL_SHIFT	16
+#define UART_MCTL_RXFIFOFILL_MASK	(0x1f << UART_MCTL_RXFIFOFILL_SHIFT)
+#define UART_MCTL_TXFIFOFILL_SHIFT	24
+#define UART_MCTL_TXFIFOFILL_MASK	(0x1f << UART_MCTL_TXFIFOFILL_SHIFT)
+
+/* UART External Input Configuration register */
+#define UART_EXTINP_REG			0xc
+#define UART_EXTINP_RI_SHIFT		0
+#define UART_EXTINP_RI_MASK		(1 << UART_EXTINP_RI_SHIFT)
+#define UART_EXTINP_CTS_SHIFT		1
+#define UART_EXTINP_CTS_MASK		(1 << UART_EXTINP_CTS_SHIFT)
+#define UART_EXTINP_DCD_SHIFT		2
+#define UART_EXTINP_DCD_MASK		(1 << UART_EXTINP_DCD_SHIFT)
+#define UART_EXTINP_DSR_SHIFT		3
+#define UART_EXTINP_DSR_MASK		(1 << UART_EXTINP_DSR_SHIFT)
+#define UART_EXTINP_IRSTAT(x)		(1 << (x + 4))
+#define UART_EXTINP_IRMASK(x)		(1 << (x + 8))
+#define UART_EXTINP_IR_RI		0
+#define UART_EXTINP_IR_CTS		1
+#define UART_EXTINP_IR_DCD		2
+#define UART_EXTINP_IR_DSR		3
+#define UART_EXTINP_RI_NOSENSE_SHIFT	16
+#define UART_EXTINP_RI_NOSENSE_MASK	(1 << UART_EXTINP_RI_NOSENSE_SHIFT)
+#define UART_EXTINP_CTS_NOSENSE_SHIFT	17
+#define UART_EXTINP_CTS_NOSENSE_MASK	(1 << UART_EXTINP_CTS_NOSENSE_SHIFT)
+#define UART_EXTINP_DCD_NOSENSE_SHIFT	18
+#define UART_EXTINP_DCD_NOSENSE_MASK	(1 << UART_EXTINP_DCD_NOSENSE_SHIFT)
+#define UART_EXTINP_DSR_NOSENSE_SHIFT	19
+#define UART_EXTINP_DSR_NOSENSE_MASK	(1 << UART_EXTINP_DSR_NOSENSE_SHIFT)
+
+/* UART Interrupt register */
+#define UART_IR_REG			0x10
+#define UART_IR_MASK(x)			(1 << (x + 16))
+#define UART_IR_STAT(x)			(1 << (x))
+#define UART_IR_EXTIP			0
+#define UART_IR_TXUNDER			1
+#define UART_IR_TXOVER			2
+#define UART_IR_TXTRESH			3
+#define UART_IR_TXRDLATCH		4
+#define UART_IR_TXEMPTY			5
+#define UART_IR_RXUNDER			6
+#define UART_IR_RXOVER			7
+#define UART_IR_RXTIMEOUT		8
+#define UART_IR_RXFULL			9
+#define UART_IR_RXTHRESH		10
+#define UART_IR_RXNOTEMPTY		11
+#define UART_IR_RXFRAMEERR		12
+#define UART_IR_RXPARERR		13
+#define UART_IR_RXBRK			14
+#define UART_IR_TXDONE			15
+
+/* UART Fifo register */
+#define UART_FIFO_REG			0x14
+#define UART_FIFO_VALID_SHIFT		0
+#define UART_FIFO_VALID_MASK		0xff
+#define UART_FIFO_FRAMEERR_SHIFT	8
+#define UART_FIFO_FRAMEERR_MASK		(1 << UART_FIFO_FRAMEERR_SHIFT)
+#define UART_FIFO_PARERR_SHIFT		9
+#define UART_FIFO_PARERR_MASK		(1 << UART_FIFO_PARERR_SHIFT)
+#define UART_FIFO_BRKDET_SHIFT		10
+#define UART_FIFO_BRKDET_MASK		(1 << UART_FIFO_BRKDET_SHIFT)
+#define UART_FIFO_ANYERR_MASK		(UART_FIFO_FRAMEERR_MASK |	\
+					UART_FIFO_PARERR_MASK |		\
+					UART_FIFO_BRKDET_MASK)
+
+
+/*************************************************************************
+ * _REG relative to RSET_GPIO
+ *************************************************************************/
+
+/* GPIO registers */
+#define GPIO_CTL_HI_REG			0x0
+#define GPIO_CTL_LO_REG			0x4
+#define GPIO_DATA_HI_REG		0x8
+#define GPIO_DATA_LO_REG		0xC
+
+/* GPIO mux registers and constants */
+#define GPIO_MODE_REG			0x18
+
+#define GPIO_MODE_6348_G4_DIAG		0x00090000
+#define GPIO_MODE_6348_G4_UTOPIA	0x00080000
+#define GPIO_MODE_6348_G4_LEGACY_LED	0x00030000
+#define GPIO_MODE_6348_G4_MII_SNOOP	0x00020000
+#define GPIO_MODE_6348_G4_EXT_EPHY	0x00010000
+#define GPIO_MODE_6348_G3_DIAG		0x00009000
+#define GPIO_MODE_6348_G3_UTOPIA	0x00008000
+#define GPIO_MODE_6348_G3_EXT_MII	0x00007000
+#define GPIO_MODE_6348_G2_DIAG		0x00000900
+#define GPIO_MODE_6348_G2_PCI		0x00000500
+#define GPIO_MODE_6348_G1_DIAG		0x00000090
+#define GPIO_MODE_6348_G1_UTOPIA	0x00000080
+#define GPIO_MODE_6348_G1_SPI_UART	0x00000060
+#define GPIO_MODE_6348_G1_SPI_MASTER	0x00000060
+#define GPIO_MODE_6348_G1_MII_PCCARD	0x00000040
+#define GPIO_MODE_6348_G1_MII_SNOOP	0x00000020
+#define GPIO_MODE_6348_G1_EXT_EPHY	0x00000010
+#define GPIO_MODE_6348_G0_DIAG		0x00000009
+#define GPIO_MODE_6348_G0_EXT_MII	0x00000007
+
+#define GPIO_MODE_6358_EXTRACS		(1 << 5)
+#define GPIO_MODE_6358_UART1		(1 << 6)
+#define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
+#define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
+#define GPIO_MODE_6358_UTOPIA		(1 << 12)
+
+
+/*************************************************************************
+ * _REG relative to RSET_ENET
+ *************************************************************************/
+
+/* Receiver Configuration register */
+#define ENET_RXCFG_REG			0x0
+#define ENET_RXCFG_ALLMCAST_SHIFT	1
+#define ENET_RXCFG_ALLMCAST_MASK	(1 << ENET_RXCFG_ALLMCAST_SHIFT)
+#define ENET_RXCFG_PROMISC_SHIFT	3
+#define ENET_RXCFG_PROMISC_MASK		(1 << ENET_RXCFG_PROMISC_SHIFT)
+#define ENET_RXCFG_LOOPBACK_SHIFT	4
+#define ENET_RXCFG_LOOPBACK_MASK	(1 << ENET_RXCFG_LOOPBACK_SHIFT)
+#define ENET_RXCFG_ENFLOW_SHIFT		5
+#define ENET_RXCFG_ENFLOW_MASK		(1 << ENET_RXCFG_ENFLOW_SHIFT)
+
+/* Receive Maximum Length register */
+#define ENET_RXMAXLEN_REG		0x4
+#define ENET_RXMAXLEN_SHIFT		0
+#define ENET_RXMAXLEN_MASK		(0x7ff << ENET_RXMAXLEN_SHIFT)
+
+/* Transmit Maximum Length register */
+#define ENET_TXMAXLEN_REG		0x8
+#define ENET_TXMAXLEN_SHIFT		0
+#define ENET_TXMAXLEN_MASK		(0x7ff << ENET_TXMAXLEN_SHIFT)
+
+/* MII Status/Control register */
+#define ENET_MIISC_REG			0x10
+#define ENET_MIISC_MDCFREQDIV_SHIFT	0
+#define ENET_MIISC_MDCFREQDIV_MASK	(0x7f << ENET_MIISC_MDCFREQDIV_SHIFT)
+#define ENET_MIISC_PREAMBLEEN_SHIFT	7
+#define ENET_MIISC_PREAMBLEEN_MASK	(1 << ENET_MIISC_PREAMBLEEN_SHIFT)
+
+/* MII Data register */
+#define ENET_MIIDATA_REG		0x14
+#define ENET_MIIDATA_DATA_SHIFT		0
+#define ENET_MIIDATA_DATA_MASK		(0xffff << ENET_MIIDATA_DATA_SHIFT)
+#define ENET_MIIDATA_TA_SHIFT		16
+#define ENET_MIIDATA_TA_MASK		(0x3 << ENET_MIIDATA_TA_SHIFT)
+#define ENET_MIIDATA_REG_SHIFT		18
+#define ENET_MIIDATA_REG_MASK		(0x1f << ENET_MIIDATA_REG_SHIFT)
+#define ENET_MIIDATA_PHYID_SHIFT	23
+#define ENET_MIIDATA_PHYID_MASK		(0x1f << ENET_MIIDATA_PHYID_SHIFT)
+#define ENET_MIIDATA_OP_READ_MASK	(0x6 << 28)
+#define ENET_MIIDATA_OP_WRITE_MASK	(0x5 << 28)
+
+/* Ethernet Interrupt Mask register */
+#define ENET_IRMASK_REG			0x18
+
+/* Ethernet Interrupt register */
+#define ENET_IR_REG			0x1c
+#define ENET_IR_MII			(1 << 0)
+#define ENET_IR_MIB			(1 << 1)
+#define ENET_IR_FLOWC			(1 << 2)
+
+/* Ethernet Control register */
+#define ENET_CTL_REG			0x2c
+#define ENET_CTL_ENABLE_SHIFT		0
+#define ENET_CTL_ENABLE_MASK		(1 << ENET_CTL_ENABLE_SHIFT)
+#define ENET_CTL_DISABLE_SHIFT		1
+#define ENET_CTL_DISABLE_MASK		(1 << ENET_CTL_DISABLE_SHIFT)
+#define ENET_CTL_SRESET_SHIFT		2
+#define ENET_CTL_SRESET_MASK		(1 << ENET_CTL_SRESET_SHIFT)
+#define ENET_CTL_EPHYSEL_SHIFT		3
+#define ENET_CTL_EPHYSEL_MASK		(1 << ENET_CTL_EPHYSEL_SHIFT)
+
+/* Transmit Control register */
+#define ENET_TXCTL_REG			0x30
+#define ENET_TXCTL_FD_SHIFT		0
+#define ENET_TXCTL_FD_MASK		(1 << ENET_TXCTL_FD_SHIFT)
+
+/* Transmit Watermask register */
+#define ENET_TXWMARK_REG		0x34
+#define ENET_TXWMARK_WM_SHIFT		0
+#define ENET_TXWMARK_WM_MASK		(0x3f << ENET_TXWMARK_WM_SHIFT)
+
+/* MIB Control register */
+#define ENET_MIBCTL_REG			0x38
+#define ENET_MIBCTL_RDCLEAR_SHIFT	0
+#define ENET_MIBCTL_RDCLEAR_MASK	(1 << ENET_MIBCTL_RDCLEAR_SHIFT)
+
+/* Perfect Match Data Low register */
+#define ENET_PML_REG(x)			(0x58 + (x) * 8)
+#define ENET_PMH_REG(x)			(0x5c + (x) * 8)
+#define ENET_PMH_DATAVALID_SHIFT	16
+#define ENET_PMH_DATAVALID_MASK		(1 << ENET_PMH_DATAVALID_SHIFT)
+
+/* MIB register */
+#define ENET_MIB_REG(x)			(0x200 + (x) * 4)
+#define ENET_MIB_REG_COUNT		55
+
+
+/*************************************************************************
+ * _REG relative to RSET_ENETDMA
+ *************************************************************************/
+
+/* Controller Configuration Register */
+#define ENETDMA_CFG_REG			(0x0)
+#define ENETDMA_CFG_EN_SHIFT		0
+#define ENETDMA_CFG_EN_MASK		(1 << ENETDMA_CFG_EN_SHIFT)
+#define ENETDMA_CFG_FLOWCH_MASK(x)	(1 << ((x >> 1) + 1))
+
+/* Flow Control Descriptor Low Threshold register */
+#define ENETDMA_FLOWCL_REG(x)		(0x4 + (x) * 6)
+
+/* Flow Control Descriptor High Threshold register */
+#define ENETDMA_FLOWCH_REG(x)		(0x8 + (x) * 6)
+
+/* Flow Control Descriptor Buffer Alloca Threshold register */
+#define ENETDMA_BUFALLOC_REG(x)		(0xc + (x) * 6)
+#define ENETDMA_BUFALLOC_FORCE_SHIFT	31
+#define ENETDMA_BUFALLOC_FORCE_MASK	(1 << ENETDMA_BUFALLOC_FORCE_SHIFT)
+
+/* Channel Configuration register */
+#define ENETDMA_CHANCFG_REG(x)		(0x100 + (x) * 0x10)
+#define ENETDMA_CHANCFG_EN_SHIFT	0
+#define ENETDMA_CHANCFG_EN_MASK		(1 << ENETDMA_CHANCFG_EN_SHIFT)
+#define ENETDMA_CHANCFG_PKTHALT_SHIFT	1
+#define ENETDMA_CHANCFG_PKTHALT_MASK	(1 << ENETDMA_CHANCFG_PKTHALT_SHIFT)
+
+/* Interrupt Control/Status register */
+#define ENETDMA_IR_REG(x)		(0x104 + (x) * 0x10)
+#define ENETDMA_IR_BUFDONE_MASK		(1 << 0)
+#define ENETDMA_IR_PKTDONE_MASK		(1 << 1)
+#define ENETDMA_IR_NOTOWNER_MASK	(1 << 2)
+
+/* Interrupt Mask register */
+#define ENETDMA_IRMASK_REG(x)		(0x108 + (x) * 0x10)
+
+/* Maximum Burst Length */
+#define ENETDMA_MAXBURST_REG(x)		(0x10C + (x) * 0x10)
+
+/* Ring Start Address register */
+#define ENETDMA_RSTART_REG(x)		(0x200 + (x) * 0x10)
+
+/* State Ram Word 2 */
+#define ENETDMA_SRAM2_REG(x)		(0x204 + (x) * 0x10)
+
+/* State Ram Word 3 */
+#define ENETDMA_SRAM3_REG(x)		(0x208 + (x) * 0x10)
+
+/* State Ram Word 4 */
+#define ENETDMA_SRAM4_REG(x)		(0x20c + (x) * 0x10)
+
+
+/*************************************************************************
+ * _REG relative to RSET_OHCI_PRIV
+ *************************************************************************/
+
+#define OHCI_PRIV_REG			0x0
+#define OHCI_PRIV_PORT1_HOST_SHIFT	0
+#define OHCI_PRIV_PORT1_HOST_MASK	(1 << OHCI_PRIV_PORT1_HOST_SHIFT)
+#define OHCI_PRIV_REG_SWAP_SHIFT	3
+#define OHCI_PRIV_REG_SWAP_MASK		(1 << OHCI_PRIV_REG_SWAP_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_USBH_PRIV
+ *************************************************************************/
+
+#define USBH_PRIV_SWAP_REG		0x0
+#define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT	4
+#define USBH_PRIV_SWAP_EHCI_ENDN_MASK	(1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT)
+#define USBH_PRIV_SWAP_EHCI_DATA_SHIFT	3
+#define USBH_PRIV_SWAP_EHCI_DATA_MASK	(1 << USBH_PRIV_SWAP_EHCI_DATA_SHIFT)
+#define USBH_PRIV_SWAP_OHCI_ENDN_SHIFT	1
+#define USBH_PRIV_SWAP_OHCI_ENDN_MASK	(1 << USBH_PRIV_SWAP_OHCI_ENDN_SHIFT)
+#define USBH_PRIV_SWAP_OHCI_DATA_SHIFT	0
+#define USBH_PRIV_SWAP_OHCI_DATA_MASK	(1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT)
+
+#define USBH_PRIV_TEST_REG		0x24
+
+
+/*************************************************************************
+ * _REG relative to RSET_MPI
+ *************************************************************************/
+
+/* well known (hard wired) chip select */
+#define MPI_CS_PCMCIA_COMMON		4
+#define MPI_CS_PCMCIA_ATTR		5
+#define MPI_CS_PCMCIA_IO		6
+
+/* Chip select base register */
+#define MPI_CSBASE_REG(x)		(0x0 + (x) * 8)
+#define MPI_CSBASE_BASE_SHIFT		13
+#define MPI_CSBASE_BASE_MASK		(0x1ffff << MPI_CSBASE_BASE_SHIFT)
+#define MPI_CSBASE_SIZE_SHIFT		0
+#define MPI_CSBASE_SIZE_MASK		(0xf << MPI_CSBASE_SIZE_SHIFT)
+
+#define MPI_CSBASE_SIZE_8K		0
+#define MPI_CSBASE_SIZE_16K		1
+#define MPI_CSBASE_SIZE_32K		2
+#define MPI_CSBASE_SIZE_64K		3
+#define MPI_CSBASE_SIZE_128K		4
+#define MPI_CSBASE_SIZE_256K		5
+#define MPI_CSBASE_SIZE_512K		6
+#define MPI_CSBASE_SIZE_1M		7
+#define MPI_CSBASE_SIZE_2M		8
+#define MPI_CSBASE_SIZE_4M		9
+#define MPI_CSBASE_SIZE_8M		10
+#define MPI_CSBASE_SIZE_16M		11
+#define MPI_CSBASE_SIZE_32M		12
+#define MPI_CSBASE_SIZE_64M		13
+#define MPI_CSBASE_SIZE_128M		14
+#define MPI_CSBASE_SIZE_256M		15
+
+/* Chip select control register */
+#define MPI_CSCTL_REG(x)		(0x4 + (x) * 8)
+#define MPI_CSCTL_ENABLE_MASK		(1 << 0)
+#define MPI_CSCTL_WAIT_SHIFT		1
+#define MPI_CSCTL_WAIT_MASK		(0x7 << MPI_CSCTL_WAIT_SHIFT)
+#define MPI_CSCTL_DATA16_MASK		(1 << 4)
+#define MPI_CSCTL_SYNCMODE_MASK		(1 << 7)
+#define MPI_CSCTL_TSIZE_MASK		(1 << 8)
+#define MPI_CSCTL_ENDIANSWAP_MASK	(1 << 10)
+#define MPI_CSCTL_SETUP_SHIFT		16
+#define MPI_CSCTL_SETUP_MASK		(0xf << MPI_CSCTL_SETUP_SHIFT)
+#define MPI_CSCTL_HOLD_SHIFT		20
+#define MPI_CSCTL_HOLD_MASK		(0xf << MPI_CSCTL_HOLD_SHIFT)
+
+/* PCI registers */
+#define MPI_SP0_RANGE_REG		0x100
+#define MPI_SP0_REMAP_REG		0x104
+#define MPI_SP0_REMAP_ENABLE_MASK	(1 << 0)
+#define MPI_SP1_RANGE_REG		0x10C
+#define MPI_SP1_REMAP_REG		0x110
+#define MPI_SP1_REMAP_ENABLE_MASK	(1 << 0)
+
+#define MPI_L2PCFG_REG			0x11C
+#define MPI_L2PCFG_CFG_TYPE_SHIFT	0
+#define MPI_L2PCFG_CFG_TYPE_MASK	(0x3 << MPI_L2PCFG_CFG_TYPE_SHIFT)
+#define MPI_L2PCFG_REG_SHIFT		2
+#define MPI_L2PCFG_REG_MASK		(0x3f << MPI_L2PCFG_REG_SHIFT)
+#define MPI_L2PCFG_FUNC_SHIFT		8
+#define MPI_L2PCFG_FUNC_MASK		(0x7 << MPI_L2PCFG_FUNC_SHIFT)
+#define MPI_L2PCFG_DEVNUM_SHIFT		11
+#define MPI_L2PCFG_DEVNUM_MASK		(0x1f << MPI_L2PCFG_DEVNUM_SHIFT)
+#define MPI_L2PCFG_CFG_USEREG_MASK	(1 << 30)
+#define MPI_L2PCFG_CFG_SEL_MASK		(1 << 31)
+
+#define MPI_L2PMEMRANGE1_REG		0x120
+#define MPI_L2PMEMBASE1_REG		0x124
+#define MPI_L2PMEMREMAP1_REG		0x128
+#define MPI_L2PMEMRANGE2_REG		0x12C
+#define MPI_L2PMEMBASE2_REG		0x130
+#define MPI_L2PMEMREMAP2_REG		0x134
+#define MPI_L2PIORANGE_REG		0x138
+#define MPI_L2PIOBASE_REG		0x13C
+#define MPI_L2PIOREMAP_REG		0x140
+#define MPI_L2P_BASE_MASK		(0xffff8000)
+#define MPI_L2PREMAP_ENABLED_MASK	(1 << 0)
+#define MPI_L2PREMAP_IS_CARDBUS_MASK	(1 << 2)
+
+#define MPI_PCIMODESEL_REG		0x144
+#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK	(1 << 0)
+#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK	(1 << 1)
+#define MPI_PCIMODESEL_EXT_ARB_MASK	(1 << 2)
+#define MPI_PCIMODESEL_PREFETCH_SHIFT	4
+#define MPI_PCIMODESEL_PREFETCH_MASK	(0xf << MPI_PCIMODESEL_PREFETCH_SHIFT)
+
+#define MPI_LOCBUSCTL_REG		0x14C
+#define MPI_LOCBUSCTL_EN_PCI_GPIO_MASK	(1 << 0)
+#define MPI_LOCBUSCTL_U2P_NOSWAP_MASK	(1 << 1)
+
+#define MPI_LOCINT_REG			0x150
+#define MPI_LOCINT_MASK(x)		(1 << (x + 16))
+#define MPI_LOCINT_STAT(x)		(1 << (x))
+#define MPI_LOCINT_DIR_FAILED		6
+#define MPI_LOCINT_EXT_PCI_INT		7
+#define MPI_LOCINT_SERR			8
+#define MPI_LOCINT_CSERR		9
+
+#define MPI_PCICFGCTL_REG		0x178
+#define MPI_PCICFGCTL_CFGADDR_SHIFT	2
+#define MPI_PCICFGCTL_CFGADDR_MASK	(0x1f << MPI_PCICFGCTL_CFGADDR_SHIFT)
+#define MPI_PCICFGCTL_WRITEEN_MASK	(1 << 7)
+
+#define MPI_PCICFGDATA_REG		0x17C
+
+/* PCI host bridge custom register */
+#define BCMPCI_REG_TIMERS		0x40
+#define REG_TIMER_TRDY_SHIFT		0
+#define REG_TIMER_TRDY_MASK		(0xff << REG_TIMER_TRDY_SHIFT)
+#define REG_TIMER_RETRY_SHIFT		8
+#define REG_TIMER_RETRY_MASK		(0xff << REG_TIMER_RETRY_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_PCMCIA
+ *************************************************************************/
+
+#define PCMCIA_C1_REG			0x0
+#define PCMCIA_C1_CD1_MASK		(1 << 0)
+#define PCMCIA_C1_CD2_MASK		(1 << 1)
+#define PCMCIA_C1_VS1_MASK		(1 << 2)
+#define PCMCIA_C1_VS2_MASK		(1 << 3)
+#define PCMCIA_C1_VS1OE_MASK		(1 << 6)
+#define PCMCIA_C1_VS2OE_MASK		(1 << 7)
+#define PCMCIA_C1_CBIDSEL_SHIFT		(8)
+#define PCMCIA_C1_CBIDSEL_MASK		(0x1f << PCMCIA_C1_CBIDSEL_SHIFT)
+#define PCMCIA_C1_EN_PCMCIA_GPIO_MASK	(1 << 13)
+#define PCMCIA_C1_EN_PCMCIA_MASK	(1 << 14)
+#define PCMCIA_C1_EN_CARDBUS_MASK	(1 << 15)
+#define PCMCIA_C1_RESET_MASK		(1 << 18)
+
+#define PCMCIA_C2_REG			0x8
+#define PCMCIA_C2_DATA16_MASK		(1 << 0)
+#define PCMCIA_C2_BYTESWAP_MASK		(1 << 1)
+#define PCMCIA_C2_RWCOUNT_SHIFT		2
+#define PCMCIA_C2_RWCOUNT_MASK		(0x3f << PCMCIA_C2_RWCOUNT_SHIFT)
+#define PCMCIA_C2_INACTIVE_SHIFT	8
+#define PCMCIA_C2_INACTIVE_MASK		(0x3f << PCMCIA_C2_INACTIVE_SHIFT)
+#define PCMCIA_C2_SETUP_SHIFT		16
+#define PCMCIA_C2_SETUP_MASK		(0x3f << PCMCIA_C2_SETUP_SHIFT)
+#define PCMCIA_C2_HOLD_SHIFT		24
+#define PCMCIA_C2_HOLD_MASK		(0x3f << PCMCIA_C2_HOLD_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_SDRAM
+ *************************************************************************/
+
+#define SDRAM_CFG_REG			0x0
+#define SDRAM_CFG_ROW_SHIFT		4
+#define SDRAM_CFG_ROW_MASK		(0x3 << SDRAM_CFG_ROW_SHIFT)
+#define SDRAM_CFG_COL_SHIFT		6
+#define SDRAM_CFG_COL_MASK		(0x3 << SDRAM_CFG_COL_SHIFT)
+#define SDRAM_CFG_32B_SHIFT		10
+#define SDRAM_CFG_32B_MASK		(1 << SDRAM_CFG_32B_SHIFT)
+#define SDRAM_CFG_BANK_SHIFT		13
+#define SDRAM_CFG_BANK_MASK		(1 << SDRAM_CFG_BANK_SHIFT)
+
+#define SDRAM_PRIO_REG			0x2C
+#define SDRAM_PRIO_MIPS_SHIFT		29
+#define SDRAM_PRIO_MIPS_MASK		(1 << SDRAM_PRIO_MIPS_SHIFT)
+#define SDRAM_PRIO_ADSL_SHIFT		30
+#define SDRAM_PRIO_ADSL_MASK		(1 << SDRAM_PRIO_ADSL_SHIFT)
+#define SDRAM_PRIO_EN_SHIFT		31
+#define SDRAM_PRIO_EN_MASK		(1 << SDRAM_PRIO_EN_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_MEMC
+ *************************************************************************/
+
+#define MEMC_CFG_REG			0x4
+#define MEMC_CFG_32B_SHIFT		1
+#define MEMC_CFG_32B_MASK		(1 << MEMC_CFG_32B_SHIFT)
+#define MEMC_CFG_COL_SHIFT		3
+#define MEMC_CFG_COL_MASK		(0x3 << MEMC_CFG_COL_SHIFT)
+#define MEMC_CFG_ROW_SHIFT		6
+#define MEMC_CFG_ROW_MASK		(0x3 << MEMC_CFG_ROW_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_DDR
+ *************************************************************************/
+
+#define DDR_DMIPSPLLCFG_REG		0x18
+#define DMIPSPLLCFG_M1_SHIFT		0
+#define DMIPSPLLCFG_M1_MASK		(0xff << DMIPSPLLCFG_M1_SHIFT)
+#define DMIPSPLLCFG_N1_SHIFT		23
+#define DMIPSPLLCFG_N1_MASK		(0x3f << DMIPSPLLCFG_N1_SHIFT)
+#define DMIPSPLLCFG_N2_SHIFT		29
+#define DMIPSPLLCFG_N2_MASK		(0x7 << DMIPSPLLCFG_N2_SHIFT)
+
+#endif /* BCM63XX_REGS_H_ */
+
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
new file mode 100644
index 000000000000..c0fce833c9ed
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
@@ -0,0 +1,11 @@
+#ifndef BCM63XX_TIMER_H_
+#define BCM63XX_TIMER_H_
+
+int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data);
+void bcm63xx_timer_unregister(int id);
+int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us);
+int bcm63xx_timer_enable(int id);
+int bcm63xx_timer_disable(int id);
+unsigned int bcm63xx_timer_countdown(unsigned int countdown_us);
+
+#endif /* !BCM63XX_TIMER_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
new file mode 100644
index 000000000000..6479090a4106
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -0,0 +1,60 @@
+#ifndef BOARD_BCM963XX_H_
+#define BOARD_BCM963XX_H_
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+
+/*
+ * flash mapping
+ */
+#define BCM963XX_CFE_VERSION_OFFSET	0x570
+#define BCM963XX_NVRAM_OFFSET		0x580
+
+/*
+ * nvram structure
+ */
+struct bcm963xx_nvram {
+	u32	version;
+	u8	reserved1[256];
+	u8	name[16];
+	u32	main_tp_number;
+	u32	psi_size;
+	u32	mac_addr_count;
+	u8	mac_addr_base[6];
+	u8	reserved2[2];
+	u32	checksum_old;
+	u8	reserved3[720];
+	u32	checksum_high;
+};
+
+/*
+ * board definition
+ */
+struct board_info {
+	u8		name[16];
+	unsigned int	expected_cpu_id;
+
+	/* enabled feature/device */
+	unsigned int	has_enet0:1;
+	unsigned int	has_enet1:1;
+	unsigned int	has_pci:1;
+	unsigned int	has_pccard:1;
+	unsigned int	has_ohci0:1;
+	unsigned int	has_ehci0:1;
+	unsigned int	has_dsp:1;
+
+	/* ethernet config */
+	struct bcm63xx_enet_platform_data enet0;
+	struct bcm63xx_enet_platform_data enet1;
+
+	/* DSP config */
+	struct bcm63xx_dsp_platform_data dsp;
+
+	/* GPIO LEDs */
+	struct gpio_led leds[5];
+};
+
+#endif /* ! BOARD_BCM963XX_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
new file mode 100644
index 000000000000..71742bac940d
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+
+#include <bcm63xx_cpu.h>
+
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_4k_cache		1
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#define cpu_has_watch			0
+#define cpu_has_divec			1
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			1
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+#define cpu_has_vtag_icache		0
+
+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345))
+#define cpu_has_dc_aliases		0
+#endif
+
+#define cpu_has_ic_fills_f_dc		0
+#define cpu_has_pindexed_dcache		0
+
+#define cpu_has_mips32r1		1
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+#define cpu_has_userlocal		0
+
+#define cpu_has_nofpuex			0
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+#define cpu_scache_line_size()		0
+
+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h
new file mode 100644
index 000000000000..7cda8c0a3979
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H
+#define __ASM_MIPS_MACH_BCM63XX_GPIO_H
+
+#include <bcm63xx_gpio.h>
+
+#define gpio_to_irq(gpio)	NULL
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+
+#define gpio_cansleep __gpio_cansleep
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/war.h b/arch/mips/include/asm/mach-bcm63xx/war.h
new file mode 100644
index 000000000000..8e3f3fdf3209
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H
+#define __ASM_MIPS_MACH_BCM63XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index 3d830756b13a..425e708d4fb9 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -31,12 +31,16 @@
 #define cpu_has_cache_cdex_s	0
 #define cpu_has_prefetch	1
 
+#define cpu_has_llsc		1
 /*
- * We should disable LL/SC on non SMP systems as it is faster to
- * disable interrupts for atomic access than a LL/SC.  Unfortunatly we
- * cannot as this breaks asm/futex.h
+ * We Disable LL/SC on non SMP systems as it is faster to disable
+ * interrupts for atomic access than a LL/SC.
  */
-#define cpu_has_llsc		1
+#ifdef CONFIG_SMP
+# define kernel_uses_llsc	1
+#else
+# define kernel_uses_llsc	0
+#endif
 #define cpu_has_vtag_icache	1
 #define cpu_has_dc_aliases	0
 #define cpu_has_ic_fills_f_dc	0
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index 07547231e078..230591707005 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -48,7 +48,6 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
 	.cache_nice_tries	= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
-				| SD_WAKE_BALANCE,	\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
index 550a10dc9dba..ce5b6e270e3f 100644
--- a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
@@ -13,8 +13,8 @@
  *      loongson2f user manual.
  */
 
-#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#ifndef __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
@@ -56,4 +56,4 @@
 #define cpu_has_watch		1
 #define cpu_icache_snoops_remote_store	1
 
-#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
+#endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
index c8de5e750777..71a6851ba833 100644
--- a/arch/mips/include/asm/mach-lemote/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -8,8 +8,8 @@
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  */
-#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H
-#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+#ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
+#define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
 
 struct device;
 
@@ -65,4 +65,4 @@ static inline int plat_device_is_coherent(struct device *dev)
 	return 0;
 }
 
-#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */
+#endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
new file mode 100644
index 000000000000..da70bcf2304e
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_MACH_LOONGSON_LOONGSON_H
+#define __ASM_MACH_LOONGSON_LOONGSON_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+
+/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */
+#include <asm/mips-boards/bonito64.h>
+
+/* loongson internal northbridge initialization */
+extern void bonito_irq_init(void);
+
+/* machine-specific reboot/halt operation */
+extern void mach_prepare_reboot(void);
+extern void mach_prepare_shutdown(void);
+
+/* environment arguments from bootloader */
+extern unsigned long bus_clock, cpu_clock_freq;
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern void __init prom_init_memory(void);
+extern void __init prom_init_cmdline(void);
+extern void __init prom_init_env(void);
+
+/* irq operation functions */
+extern void bonito_irqdispatch(void);
+extern void __init bonito_irq_init(void);
+extern void __init set_irq_trigger_mode(void);
+extern void __init mach_init_irq(void);
+extern void mach_irq_dispatch(unsigned int pending);
+
+/* PCI Configuration Registers */
+#define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
+
+/* PCI_Hit*_Sel_* */
+
+#define LOONGSON_PCI_HIT0_SEL_L     BONITO(BONITO_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H     BONITO(BONITO_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L     BONITO(BONITO_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H     BONITO(BONITO_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L     BONITO(BONITO_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H     BONITO(BONITO_REGBASE + 0x64)
+
+/* PXArb Config & Status */
+
+#define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
+
+/* loongson2-specific perf counter IRQ */
+#define LOONGSON2_PERFCNT_IRQ   (MIPS_CPU_IRQ_BASE + 6)
+
+#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
new file mode 100644
index 000000000000..206ea2067916
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON_MACHINE_H
+#define __ASM_MACH_LOONGSON_MACHINE_H
+
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
+
+#endif
+
+#endif /* __ASM_MACH_LOONGSON_MACHINE_H */
diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-loongson/mc146818rtc.h
index ed5147e11085..ed7fe978335a 100644
--- a/arch/mips/include/asm/mach-lemote/mc146818rtc.h
+++ b/arch/mips/include/asm/mach-loongson/mc146818rtc.h
@@ -7,8 +7,8 @@
  *
  * RTC routines for PC style attached Dallas chip.
  */
-#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H
-#define __ASM_MACH_LEMOTE_MC146818RTC_H
+#ifndef __ASM_MACH_LOONGSON_MC146818RTC_H
+#define __ASM_MACH_LOONGSON_MC146818RTC_H
 
 #include <linux/io.h>
 
@@ -33,4 +33,4 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
 #define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
 #endif
 
-#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */
+#endif /* __ASM_MACH_LOONGSON_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h
new file mode 100644
index 000000000000..bd7b3cba7e35
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/mem.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON_MEM_H
+#define __ASM_MACH_LOONGSON_MEM_H
+
+/*
+ * On Lemote Loongson 2e
+ *
+ * the high memory space starts from 512M.
+ * the peripheral registers reside between 0x1000:0000 and 0x2000:0000.
+ */
+
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+#define LOONGSON_HIGHMEM_START  0x20000000
+
+#define LOONGSON_MMIO_MEM_START 0x10000000
+#define LOONGSON_MMIO_MEM_END   0x20000000
+
+#endif
+
+#endif /* __ASM_MACH_LOONGSON_MEM_H */
diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-loongson/pci.h
index ea6aa143b78e..f1663ca81da0 100644
--- a/arch/mips/include/asm/mach-lemote/pci.h
+++ b/arch/mips/include/asm/mach-loongson/pci.h
@@ -19,12 +19,19 @@
  * 02139, USA.
  */
 
-#ifndef _LEMOTE_PCI_H_
-#define _LEMOTE_PCI_H_
+#ifndef __ASM_MACH_LOONGSON_PCI_H_
+#define __ASM_MACH_LOONGSON_PCI_H_
 
-#define LOONGSON2E_PCI_MEM_START	0x14000000UL
-#define LOONGSON2E_PCI_MEM_END		0x1fffffffUL
-#define LOONGSON2E_PCI_IO_START		0x00004000UL
-#define LOONGSON2E_IO_PORT_BASE		0x1fd00000UL
+extern struct pci_ops bonito64_pci_ops;
 
-#endif /* !_LEMOTE_PCI_H_ */
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+/* this pci memory space is mapped by pcimap in pci.c */
+#define LOONGSON_PCI_MEM_START	BONITO_PCILO1_BASE
+#define LOONGSON_PCI_MEM_END	(BONITO_PCILO1_BASE + 0x04000000 * 2)
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#endif
+
+#endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-loongson/war.h
index 05f89e0f2a11..4b971c3ffd8d 100644
--- a/arch/mips/include/asm/mach-lemote/war.h
+++ b/arch/mips/include/asm/mach-loongson/war.h
@@ -5,8 +5,8 @@
  *
  * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
  */
-#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H
-#define __ASM_MIPS_MACH_LEMOTE_WAR_H
+#ifndef __ASM_MACH_LOONGSON_WAR_H
+#define __ASM_MACH_LOONGSON_WAR_H
 
 #define R4600_V1_INDEX_ICACHEOP_WAR	0
 #define R4600_V1_HIT_CACHEOP_WAR	0
@@ -22,4 +22,4 @@
 #define R10000_LLSC_WAR			0
 #define MIPS34K_MISSED_ITLB_WAR		0
 
-#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */
+#endif /* __ASM_MACH_LEMOTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
index 7f3e3f9bd23a..2848cea42bce 100644
--- a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
@@ -28,11 +28,7 @@
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
-#ifdef CONFIG_CPU_HAS_LLSC
 #define cpu_has_llsc		1
-#else
-#define cpu_has_llsc		0
-#endif
 /* #define cpu_has_vtag_icache	? */
 /* #define cpu_has_dc_aliases	? */
 /* #define cpu_has_ic_fills_f_dc ? */
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index a0f04bb99c99..a576ce044c3c 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -26,7 +26,7 @@
 /* offsets from base register */
 #define BONITO(x)	(x)
 
-#elif defined(CONFIG_LEMOTE_FULONG)
+#elif defined(CONFIG_LEMOTE_FULOONG2E)
 
 #define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
 #define BONITO_IRQ_BASE   32
diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
index c0da1a881e3d..46c08563e532 100644
--- a/arch/mips/include/asm/mips-boards/generic.h
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -87,8 +87,6 @@
 
 extern int mips_revision_sconid;
 
-extern void mips_reboot_setup(void);
-
 #ifdef CONFIG_PCI
 extern void mips_pcibios_init(void);
 #else
diff --git a/arch/mips/include/asm/octeon/cvmx-rnm-defs.h b/arch/mips/include/asm/octeon/cvmx-rnm-defs.h
new file mode 100644
index 000000000000..4586958c97be
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-rnm-defs.h
@@ -0,0 +1,88 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_RNM_DEFS_H__
+#define __CVMX_RNM_DEFS_H__
+
+#include <linux/types.h>
+
+#define CVMX_RNM_BIST_STATUS \
+	 CVMX_ADD_IO_SEG(0x0001180040000008ull)
+#define CVMX_RNM_CTL_STATUS \
+	 CVMX_ADD_IO_SEG(0x0001180040000000ull)
+
+union cvmx_rnm_bist_status {
+	uint64_t u64;
+	struct cvmx_rnm_bist_status_s {
+		uint64_t reserved_2_63:62;
+		uint64_t rrc:1;
+		uint64_t mem:1;
+	} s;
+	struct cvmx_rnm_bist_status_s cn30xx;
+	struct cvmx_rnm_bist_status_s cn31xx;
+	struct cvmx_rnm_bist_status_s cn38xx;
+	struct cvmx_rnm_bist_status_s cn38xxp2;
+	struct cvmx_rnm_bist_status_s cn50xx;
+	struct cvmx_rnm_bist_status_s cn52xx;
+	struct cvmx_rnm_bist_status_s cn52xxp1;
+	struct cvmx_rnm_bist_status_s cn56xx;
+	struct cvmx_rnm_bist_status_s cn56xxp1;
+	struct cvmx_rnm_bist_status_s cn58xx;
+	struct cvmx_rnm_bist_status_s cn58xxp1;
+};
+
+union cvmx_rnm_ctl_status {
+	uint64_t u64;
+	struct cvmx_rnm_ctl_status_s {
+		uint64_t reserved_9_63:55;
+		uint64_t ent_sel:4;
+		uint64_t exp_ent:1;
+		uint64_t rng_rst:1;
+		uint64_t rnm_rst:1;
+		uint64_t rng_en:1;
+		uint64_t ent_en:1;
+	} s;
+	struct cvmx_rnm_ctl_status_cn30xx {
+		uint64_t reserved_4_63:60;
+		uint64_t rng_rst:1;
+		uint64_t rnm_rst:1;
+		uint64_t rng_en:1;
+		uint64_t ent_en:1;
+	} cn30xx;
+	struct cvmx_rnm_ctl_status_cn30xx cn31xx;
+	struct cvmx_rnm_ctl_status_cn30xx cn38xx;
+	struct cvmx_rnm_ctl_status_cn30xx cn38xxp2;
+	struct cvmx_rnm_ctl_status_s cn50xx;
+	struct cvmx_rnm_ctl_status_s cn52xx;
+	struct cvmx_rnm_ctl_status_s cn52xxp1;
+	struct cvmx_rnm_ctl_status_s cn56xx;
+	struct cvmx_rnm_ctl_status_s cn56xxp1;
+	struct cvmx_rnm_ctl_status_s cn58xx;
+	struct cvmx_rnm_ctl_status_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index e31e3fe14f8a..9d9381e2e3d8 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -271,7 +271,7 @@ static inline void cvmx_write_csr(uint64_t csr_addr, uint64_t val)
 	 * what RSL read we do, so we choose CVMX_MIO_BOOT_BIST_STAT
 	 * because it is fast and harmless.
 	 */
-	if ((csr_addr >> 40) == (0x800118))
+	if (((csr_addr >> 40) & 0x7ffff) == (0x118))
 		cvmx_read64(CVMX_MIO_BOOT_BIST_STAT);
 }
 
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 4320239cf4ef..f266295cce51 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -10,6 +10,7 @@
 #define _ASM_PAGE_H
 
 #include <spaces.h>
+#include <linux/const.h>
 
 /*
  * PAGE_SHIFT determines the page size
@@ -29,12 +30,12 @@
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PAGE_SHIFT	16
 #endif
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
 
 #ifdef CONFIG_HUGETLB_PAGE
 #define HPAGE_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
-#define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
+#define HPAGE_SIZE	(_AC(1,UL) << HPAGE_SHIFT)
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #endif /* CONFIG_HUGETLB_PAGE */
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 4ed9d1bba2ba..9cd508993956 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -109,13 +109,13 @@
 
 #define VMALLOC_START		MAP_BASE
 #define VMALLOC_END	\
-	(VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
+	(VMALLOC_START + \
+	 PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32))
 #if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
 	VMALLOC_START != CKSSEG
 /* Load modules into 32bit-compatible segment. */
 #define MODULE_START	CKSSEG
 #define MODULE_END	(FIXADDR_START-2*PAGE_SIZE)
-extern pgd_t module_pg_dir[PTRS_PER_PGD];
 #endif
 
 #define pte_ERROR(e) \
@@ -188,12 +188,7 @@ static inline void pud_clear(pud_t *pudp)
 #define __pmd_offset(address)	pmd_index(address)
 
 /* to find an entry in a kernel page-table-directory */
-#ifdef MODULE_START
-#define pgd_offset_k(address) \
-	((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL))
-#else
-#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL)
-#endif
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
 #define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
 #define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
index cd30f83235bb..fcf5f98d90cc 100644
--- a/arch/mips/include/asm/system.h
+++ b/arch/mips/include/asm/system.h
@@ -32,6 +32,9 @@ extern asmlinkage void *resume(void *last, void *next, void *next_ti);
 
 struct task_struct;
 
+extern unsigned int ll_bit;
+extern struct task_struct *ll_task;
+
 #ifdef CONFIG_MIPS_MT_FPAFF
 
 /*
@@ -63,11 +66,18 @@ do {									\
 #define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0)
 #endif
 
+#define __clear_software_ll_bit()					\
+do {									\
+	if (!__builtin_constant_p(cpu_has_llsc) || !cpu_has_llsc)	\
+		ll_bit = 0;						\
+} while (0)
+
 #define switch_to(prev, next, last)					\
 do {									\
 	__mips_mt_fpaff_switch_to(prev);				\
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
+	__clear_software_ll_bit();					\
 	(last) = resume(prev, next, task_thread_info(next));		\
 } while (0)
 
@@ -84,7 +94,7 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 {
 	__u32 retval;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
@@ -99,7 +109,7 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
@@ -136,7 +146,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 {
 	__u64 retval;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
@@ -149,7 +159,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 8d006ec65677..2c1e1d02338b 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -183,9 +183,6 @@ void output_mm_defines(void)
 	OFFSET(MM_PGD, mm_struct, pgd);
 	OFFSET(MM_CONTEXT, mm_struct, context);
 	BLANK();
-	DEFINE(_PAGE_SIZE, PAGE_SIZE);
-	DEFINE(_PAGE_SHIFT, PAGE_SHIFT);
-	BLANK();
 	DEFINE(_PGD_T_SIZE, sizeof(pgd_t));
 	DEFINE(_PMD_T_SIZE, sizeof(pmd_t));
 	DEFINE(_PTE_T_SIZE, sizeof(pte_t));
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 02b7713cf71c..408d0a07b3a3 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -167,7 +167,7 @@ static inline void check_mult_sh(void)
 	panic(bug64hit, !R4000_WAR ? r4kwar : nowar);
 }
 
-static volatile int daddi_ov __cpuinitdata = 0;
+static volatile int daddi_ov __cpuinitdata;
 
 asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
 {
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 1abe9905c9c1..f709657e4dcd 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -31,7 +31,7 @@
  * The wait instruction stops the pipeline and reduces the power consumption of
  * the CPU very much.
  */
-void (*cpu_wait)(void) = NULL;
+void (*cpu_wait)(void);
 
 static void r3081_wait(void)
 {
@@ -91,16 +91,13 @@ static void rm7k_wait_irqoff(void)
 	local_irq_enable();
 }
 
-/* The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter. */
-int allow_au1k_wait;
-
+/*
+ * The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter.
+ * alchemy/common/time.c may override cpu_wait!
+ */
 static void au1k_wait(void)
 {
-	if (!allow_au1k_wait)
-		return;
-
-	/* using the wait instruction makes CP0 counter unusable */
 	__asm__("	.set	mips3			\n"
 		"	cache	0x14, 0(%0)		\n"
 		"	cache	0x14, 32(%0)		\n"
@@ -115,7 +112,7 @@ static void au1k_wait(void)
 		: : "r" (au1k_wait));
 }
 
-static int __initdata nowait = 0;
+static int __initdata nowait;
 
 static int __init wait_disable(char *s)
 {
@@ -159,6 +156,9 @@ void __init check_wait(void)
 	case CPU_25KF:
 	case CPU_PR4450:
 	case CPU_BCM3302:
+	case CPU_BCM6338:
+	case CPU_BCM6348:
+	case CPU_BCM6358:
 	case CPU_CAVIUM_OCTEON:
 		cpu_wait = r4k_wait;
 		break;
@@ -857,6 +857,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_BCM3302:
+	 /* same as PRID_IMP_BCM6338 */
 		c->cputype = CPU_BCM3302;
 		__cpu_name[cpu] = "Broadcom BCM3302";
 		break;
@@ -864,6 +865,25 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_BCM4710;
 		__cpu_name[cpu] = "Broadcom BCM4710";
 		break;
+	case PRID_IMP_BCM6345:
+		c->cputype = CPU_BCM6345;
+		__cpu_name[cpu] = "Broadcom BCM6345";
+		break;
+	case PRID_IMP_BCM6348:
+		c->cputype = CPU_BCM6348;
+		__cpu_name[cpu] = "Broadcom BCM6348";
+		break;
+	case PRID_IMP_BCM4350:
+		switch (c->processor_id & 0xf0) {
+		case PRID_REV_BCM6358:
+			c->cputype = CPU_BCM6358;
+			__cpu_name[cpu] = "Broadcom BCM6358";
+			break;
+		default:
+			c->cputype = CPU_UNKNOWN;
+			break;
+		}
+		break;
 	}
 }
 
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index fd6e51224034..f2397f00db43 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -31,7 +31,7 @@
 #include <asm/rtlx.h>
 #include <asm/kspd.h>
 
-static struct workqueue_struct *workqueue = NULL;
+static struct workqueue_struct *workqueue;
 static struct work_struct work;
 
 extern unsigned long cpu_khz;
@@ -58,7 +58,7 @@ struct mtsp_syscall_generic {
 };
 
 static struct list_head kspd_notifylist;
-static int sp_stopping = 0;
+static int sp_stopping;
 
 /* these should match with those in the SDE kit */
 #define MTSP_SYSCALL_BASE	0
@@ -328,7 +328,7 @@ static void sp_cleanup(void)
 	sys_chdir("/");
 }
 
-static int channel_open = 0;
+static int channel_open;
 
 /* the work handler */
 static void sp_work(struct work_struct *unused)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index 42461310b185..cbc6182b0065 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -18,7 +18,7 @@
 cpumask_t mt_fpu_cpumask;
 
 static int fpaff_threshold = -1;
-unsigned long mt_fpemul_threshold = 0;
+unsigned long mt_fpemul_threshold;
 
 /*
  * Replacement functions for the sys_sched_setaffinity() and
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index d01665a453f5..b2259e7cd829 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -125,10 +125,10 @@ void mips_mt_regdump(unsigned long mvpctl)
 	local_irq_restore(flags);
 }
 
-static int mt_opt_norps = 0;
+static int mt_opt_norps;
 static int mt_opt_rpsctl = -1;
 static int mt_opt_nblsu = -1;
-static int mt_opt_forceconfig7 = 0;
+static int mt_opt_forceconfig7;
 static int mt_opt_config7 = -1;
 
 static int __init rps_disable(char *s)
@@ -161,8 +161,8 @@ static int __init config7_set(char *str)
 __setup("config7=", config7_set);
 
 /* Experimental cache flush control parameters that should go away some day */
-int mt_protiflush = 0;
-int mt_protdflush = 0;
+int mt_protiflush;
+int mt_protdflush;
 int mt_n_iflushes = 1;
 int mt_n_dflushes = 1;
 
@@ -194,7 +194,7 @@ static int __init ndflush(char *s)
 }
 __setup("ndflush=", ndflush);
 
-static unsigned int itc_base = 0;
+static unsigned int itc_base;
 
 static int __init set_itc_base(char *str)
 {
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index d52389672b06..3952b8323efa 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -36,9 +36,6 @@
 	.align	7
 	LEAF(resume)
 	.set arch=octeon
-#ifndef CONFIG_CPU_HAS_LLSC
-	sw	zero, ll_bit
-#endif
 	mfc0	t1, CP0_STATUS
 	LONG_S	t1, THREAD_STATUS(a0)
 	cpu_save_nonscratch a0
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 656bde2e11b1..698414b7a253 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -46,9 +46,6 @@
  *                     struct thread_info *next_ti) )
  */
 LEAF(resume)
-#ifndef CONFIG_CPU_HAS_LLSC
-	sw      zero, ll_bit
-#endif
 	mfc0	t1, CP0_STATUS
 	sw	t1, THREAD_STATUS(a0)
 	cpu_save_nonscratch a0
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index d9bfae53c43f..8893ee1a2368 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -45,9 +45,6 @@
  */
 	.align	5
 	LEAF(resume)
-#ifndef CONFIG_CPU_HAS_LLSC
-	sw	zero, ll_bit
-#endif
 	mfc0	t1, CP0_STATUS
 	LONG_S	t1, THREAD_STATUS(a0)
 	cpu_save_nonscratch a0
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 4ce93aa7b372..a10ebfdc28ae 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -57,7 +57,7 @@ static struct chan_waitqueues {
 } channel_wqs[RTLX_CHANNELS];
 
 static struct vpe_notifications notify;
-static int sp_stopping = 0;
+static int sp_stopping;
 
 extern void *vpe_get_shared(int index);
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index b57082123536..7c2de4f091c4 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -187,78 +187,6 @@ illegal_syscall:
 	j	o32_syscall_exit
 	END(handle_sys)
 
-	LEAF(mips_atomic_set)
-	andi	v0, a1, 3			# must be word aligned
-	bnez	v0, bad_alignment
-
-	lw	v1, TI_ADDR_LIMIT($28)		# in legal address range?
-	addiu	a0, a1, 4
-	or	a0, a0, a1
-	and	a0, a0, v1
-	bltz	a0, bad_address
-
-#ifdef CONFIG_CPU_HAS_LLSC
-	/* Ok, this is the ll/sc case.  World is sane :-)  */
-1:	ll	v0, (a1)
-	move	a0, a2
-2:	sc	a0, (a1)
-#if R10000_LLSC_WAR
-	beqzl	a0, 1b
-#else
-	beqz	a0, 1b
-#endif
-
-	.section __ex_table,"a"
-	PTR	1b, bad_stack
-	PTR	2b, bad_stack
-	.previous
-#else
-	sw	a1, 16(sp)
-	sw	a2, 20(sp)
-
-	move	a0, sp
-	move	a2, a1
-	li	a1, 1
-	jal	do_page_fault
-
-	lw	a1, 16(sp)
-	lw	a2, 20(sp)
-
-	/*
-	 * At this point the page should be readable and writable unless
-	 * there was no more memory available.
-	 */
-1:	lw	v0, (a1)
-2:	sw	a2, (a1)
-
-	.section __ex_table,"a"
-	PTR	1b, no_mem
-	PTR	2b, no_mem
-	.previous
-#endif
-
-	sw	zero, PT_R7(sp)		# success
-	sw	v0, PT_R2(sp)		# result
-
-	j	o32_syscall_exit	# continue like a normal syscall
-
-no_mem:	li	v0, -ENOMEM
-	jr	ra
-
-bad_address:
-	li	v0, -EFAULT
-	jr	ra
-
-bad_alignment:
-	li	v0, -EINVAL
-	jr	ra
-	END(mips_atomic_set)
-
-	LEAF(sys_sysmips)
-	beq	a0, MIPS_ATOMIC_SET, mips_atomic_set
-	j	_sys_sysmips
-	END(sys_sysmips)
-
 	LEAF(sys_syscall)
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 3d866f24e064..b97b993846d6 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -124,78 +124,6 @@ illegal_syscall:
 	j	n64_syscall_exit
 	END(handle_sys64)
 
-	LEAF(mips_atomic_set)
-	andi	v0, a1, 3			# must be word aligned
-	bnez	v0, bad_alignment
-
-	LONG_L	v1, TI_ADDR_LIMIT($28)		# in legal address range?
-	LONG_ADDIU	a0, a1, 4
-	or	a0, a0, a1
-	and	a0, a0, v1
-	bltz	a0, bad_address
-
-#ifdef CONFIG_CPU_HAS_LLSC
-	/* Ok, this is the ll/sc case.  World is sane :-)  */
-1:	ll	v0, (a1)
-	move	a0, a2
-2:	sc	a0, (a1)
-#if R10000_LLSC_WAR
-	beqzl	a0, 1b
-#else
-	beqz	a0, 1b
-#endif
-
-	.section __ex_table,"a"
-	PTR	1b, bad_stack
-	PTR	2b, bad_stack
-	.previous
-#else
-	sw	a1, 16(sp)
-	sw	a2, 20(sp)
-
-	move	a0, sp
-	move	a2, a1
-	li	a1, 1
-	jal	do_page_fault
-
-	lw	a1, 16(sp)
-	lw	a2, 20(sp)
-
-	/*
-	 * At this point the page should be readable and writable unless
-	 * there was no more memory available.
-	 */
-1:	lw	v0, (a1)
-2:	sw	a2, (a1)
-
-	.section __ex_table,"a"
-	PTR	1b, no_mem
-	PTR	2b, no_mem
-	.previous
-#endif
-
-	sd	zero, PT_R7(sp)		# success
-	sd	v0, PT_R2(sp)		# result
-
-	j	n64_syscall_exit	# continue like a normal syscall
-
-no_mem:	li	v0, -ENOMEM
-	jr	ra
-
-bad_address:
-	li	v0, -EFAULT
-	jr	ra
-
-bad_alignment:
-	li	v0, -EINVAL
-	jr	ra
-	END(mips_atomic_set)
-
-	LEAF(sys_sysmips)
-	beq	a0, MIPS_ATOMIC_SET, mips_atomic_set
-	j	_sys_sysmips
-	END(sys_sysmips)
-
 	.align	3
 sys_call_table:
 	PTR	sys_read			/* 5000 */
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 2950b97253b7..2b290d70083e 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -441,7 +441,7 @@ static void __init bootmem_init(void)
  * initialization hook for anything else was introduced.
  */
 
-static int usermem __initdata = 0;
+static int usermem __initdata;
 
 static int __init early_parse_mem(char *p)
 {
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index bc7d9b05e2f4..64668a93248b 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -32,6 +32,7 @@
 #include <linux/cpumask.h>
 #include <linux/cpu.h>
 #include <linux/err.h>
+#include <linux/smp.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
@@ -49,8 +50,6 @@ volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
 int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
 int __cpu_logical_map[NR_CPUS];		/* Map logical to physical */
 
-extern void cpu_idle(void);
-
 /* Number of TCs (or siblings in Intel speak) per CPU core */
 int smp_num_siblings = 1;
 EXPORT_SYMBOL(smp_num_siblings);
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index c16bb6d6c25c..1a466baf0edf 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -95,14 +95,14 @@ void init_smtc_stats(void);
 
 /* Global SMTC Status */
 
-unsigned int smtc_status = 0;
+unsigned int smtc_status;
 
 /* Boot command line configuration overrides */
 
 static int vpe0limit;
-static int ipibuffers = 0;
-static int nostlb = 0;
-static int asidmask = 0;
+static int ipibuffers;
+static int nostlb;
+static int asidmask;
 unsigned long smtc_asid_mask = 0xff;
 
 static int __init vpe0tcs(char *str)
@@ -151,7 +151,7 @@ __setup("asidmask=", asidmask_set);
 
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 
-static int hang_trig = 0;
+static int hang_trig;
 
 static int __init hangtrig_enable(char *s)
 {
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 8cf384644040..3fe1fcfa2e73 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -28,7 +28,9 @@
 #include <linux/compiler.h>
 #include <linux/module.h>
 #include <linux/ipc.h>
+#include <linux/uaccess.h>
 
+#include <asm/asm.h>
 #include <asm/branch.h>
 #include <asm/cachectl.h>
 #include <asm/cacheflush.h>
@@ -290,12 +292,116 @@ SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
 	return 0;
 }
 
-asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3)
+static inline int mips_atomic_set(struct pt_regs *regs,
+	unsigned long addr, unsigned long new)
 {
+	unsigned long old, tmp;
+	unsigned int err;
+
+	if (unlikely(addr & 3))
+		return -EINVAL;
+
+	if (unlikely(!access_ok(VERIFY_WRITE, addr, 4)))
+		return -EINVAL;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__ (
+		"	li	%[err], 0				\n"
+		"1:	ll	%[old], (%[addr])			\n"
+		"	move	%[tmp], %[new]				\n"
+		"2:	sc	%[tmp], (%[addr])			\n"
+		"	beqzl	%[tmp], 1b				\n"
+		"3:							\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%[err], %[efault]			\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"STR(PTR)"	1b, 4b				\n"
+		"	"STR(PTR)"	2b, 4b				\n"
+		"	.previous					\n"
+		: [old] "=&r" (old),
+		  [err] "=&r" (err),
+		  [tmp] "=&r" (tmp)
+		: [addr] "r" (addr),
+		  [new] "r" (new),
+		  [efault] "i" (-EFAULT)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__ (
+		"	li	%[err], 0				\n"
+		"1:	ll	%[old], (%[addr])			\n"
+		"	move	%[tmp], %[new]				\n"
+		"2:	sc	%[tmp], (%[addr])			\n"
+		"	bnez	%[tmp], 4f				\n"
+		"3:							\n"
+		"	.subsection 2					\n"
+		"4:	b	1b					\n"
+		"	.previous					\n"
+		"							\n"
+		"	.section .fixup,\"ax\"				\n"
+		"5:	li	%[err], %[efault]			\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"STR(PTR)"	1b, 5b				\n"
+		"	"STR(PTR)"	2b, 5b				\n"
+		"	.previous					\n"
+		: [old] "=&r" (old),
+		  [err] "=&r" (err),
+		  [tmp] "=&r" (tmp)
+		: [addr] "r" (addr),
+		  [new] "r" (new),
+		  [efault] "i" (-EFAULT)
+		: "memory");
+	} else {
+		do {
+			preempt_disable();
+			ll_bit = 1;
+			ll_task = current;
+			preempt_enable();
+
+			err = __get_user(old, (unsigned int *) addr);
+			err |= __put_user(new, (unsigned int *) addr);
+			if (err)
+				break;
+			rmb();
+		} while (!ll_bit);
+	}
+
+	if (unlikely(err))
+		return err;
+
+	regs->regs[2] = old;
+	regs->regs[7] = 0;	/* No error */
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+	"	move	$29, %0						\n"
+	"	j	syscall_exit					\n"
+	: /* no outputs */
+	: "r" (regs));
+
+	/* unreached.  Honestly.  */
+	while (1);
+}
+
+save_static_function(sys_sysmips);
+static int __used noinline
+_sys_sysmips(nabi_no_regargs struct pt_regs regs)
+{
+	long cmd, arg1, arg2, arg3;
+
+	cmd = regs.regs[4];
+	arg1 = regs.regs[5];
+	arg2 = regs.regs[6];
+	arg3 = regs.regs[7];
+
 	switch (cmd) {
 	case MIPS_ATOMIC_SET:
-		printk(KERN_CRIT "How did I get here?\n");
-		return -EINVAL;
+		return mips_atomic_set(&regs, arg1, arg2);
 
 	case MIPS_FIXADE:
 		if (arg1 & ~3)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 08f1edf355e8..0a18b4c62afb 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -466,9 +466,8 @@ asmlinkage void do_be(struct pt_regs *regs)
  * The ll_bit is cleared by r*_switch.S
  */
 
-unsigned long ll_bit;
-
-static struct task_struct *ll_task = NULL;
+unsigned int ll_bit;
+struct task_struct *ll_task;
 
 static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode)
 {
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 1474c18fb777..2769bed3d2af 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -1,4 +1,5 @@
 #include <asm/asm-offsets.h>
+#include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 
 #undef mips
@@ -42,13 +43,7 @@ SECTIONS
 	} :text = 0
 	_etext = .;	/* End of text section */
 
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/* Exception table for data bus errors */
 	__dbe_table : {
@@ -65,20 +60,10 @@ SECTIONS
 	/* writeable */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
-		/*
-		 * This ALIGN is needed as a workaround for a bug a
-		 * gcc bug upto 4.1 which limits the maximum alignment
-		 * to at most 32kB and results in the following
-		 * warning:
-		 *
-		 *  CC      arch/mips/kernel/init_task.o
-		 * arch/mips/kernel/init_task.c:30: warning: alignment
-		 * of ‘init_thread_union’ is greater than maximum
-		 * object file alignment.  Using 32768
-		 */
-		. = ALIGN(_PAGE_SIZE);
-		*(.data.init_task)
 
+		INIT_TASK_DATA(PAGE_SIZE)
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
 		DATA_DATA
 		CONSTRUCTORS
 	}
@@ -95,51 +80,13 @@ SECTIONS
 	.sdata : {
 		*(.sdata)
 	}
-
-	. = ALIGN(_PAGE_SIZE);
-	.data_nosave : {
-		__nosave_begin = .;
-		*(.data.nosave)
-	}
-	. = ALIGN(_PAGE_SIZE);
-	__nosave_end = .;
-
-	. = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
 	_edata =  .;			/* End of data section */
 
 	/* will be freed after init */
-	. = ALIGN(_PAGE_SIZE);		/* Init code and data */
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
 	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 
 	/* .exit.text is discarded at runtime, not link time, to deal with
 	 * references from .rodata
@@ -150,29 +97,13 @@ SECTIONS
 	.exit.data : {
 		EXIT_DATA
 	}
-#if defined(CONFIG_BLK_DEV_INITRD)
-	. = ALIGN(_PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-	PERCPU(_PAGE_SIZE)
-	. = ALIGN(_PAGE_SIZE);
+
+	PERCPU(PAGE_SIZE)
+	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	/* freed after init ends here */
 
-	__bss_start = .;	/* BSS */
-	.sbss  : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
+	BSS_SECTION(0, 0, 0)
 
 	_end = . ;
 
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 9a1ab7e87fd4..eb6c4c5b7fbe 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -74,7 +74,7 @@ static const int minor = 1;	/* fixed for now  */
 
 #ifdef CONFIG_MIPS_APSP_KSPD
 static struct kspd_notifications kspd_events;
-static int kspd_events_reqd = 0;
+static int kspd_events_reqd;
 #endif
 
 /* grab the likely amount of memory we will need. */
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
index 52cb1436a12a..c6fd96ff118d 100644
--- a/arch/mips/lasat/ds1603.c
+++ b/arch/mips/lasat/ds1603.c
@@ -135,7 +135,7 @@ static void rtc_end_op(void)
 	lasat_ndelay(1000);
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned long word;
 	unsigned long flags;
@@ -147,7 +147,8 @@ unsigned long read_persistent_clock(void)
 	rtc_end_op();
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	return word;
+	ts->tv_sec = word;
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_mmss(unsigned long time)
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 8f88886feb12..3f04d4c406b7 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -92,10 +92,12 @@ static int rtctmp;
 int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
+	struct timespec ts;
 	int r;
 
 	if (!write) {
-		rtctmp = read_persistent_clock();
+		read_persistent_clock(&ts);
+		rtctmp = ts.tv_sec;
 		/* check for time < 0 and set to 0 */
 		if (rtctmp < 0)
 			rtctmp = 0;
@@ -134,9 +136,11 @@ int sysctl_lasat_rtc(ctl_table *table,
 		    void *oldval, size_t *oldlenp,
 		    void *newval, size_t newlen)
 {
+	struct timespec ts;
 	int r;
 
-	rtctmp = read_persistent_clock();
+	read_persistent_clock(&ts);
+	rtctmp = ts.tv_sec;
 	if (rtctmp < 0)
 		rtctmp = 0;
 	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile
deleted file mode 100644
index d34671d1b899..000000000000
--- a/arch/mips/lemote/lm2e/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for Lemote Fulong mini-PC board.
-#
-
-obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/lemote/lm2e/dbg_io.c b/arch/mips/lemote/lm2e/dbg_io.c
deleted file mode 100644
index 6c95da3ca76f..000000000000
--- a/arch/mips/lemote/lm2e/dbg_io.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <asm/serial.h>
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-#ifdef CONFIG_64BIT
-#define         BASE                    (0xffffffffbfd003f8)
-#else
-#define         BASE                    (0xbfd003f8)
-#endif
-
-#define         MAX_BAUD                BASE_BAUD
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              1
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)	readb((char *)BASE + (y))
-#define         UART16550_WRITE(y, z)	writeb(z, (char *)BASE + (y))
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	u32 divisor;
-
-	/* disable interrupts */
-	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-	/* set up buad rate */
-	/* set DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-	/* set divisor */
-	divisor = MAX_BAUD / baud;
-	UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-	UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-	/* clear DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-
-	/* set data format */
-	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0) ;
-	return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		/*
-		   debugInit(UART16550_BAUD_115200,
-		   UART16550_DATA_8BIT,
-		   UART16550_PARITY_NONE, UART16550_STOP_1BIT); */
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0) ;
-	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-	return 1;
-}
diff --git a/arch/mips/lemote/lm2e/irq.c b/arch/mips/lemote/lm2e/irq.c
deleted file mode 100644
index 1d0a09f3b832..000000000000
--- a/arch/mips/lemote/lm2e/irq.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-#include <asm/mips-boards/bonito64.h>
-
-
-/*
- * the first level int-handler will jump here if it is a bonito irq
- */
-static void bonito_irqdispatch(void)
-{
-	u32 int_status;
-	int i;
-
-	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
-	int_status = BONITO_INTISR;
-	if (int_status & (1 << 10)) {
-		while (int_status & (1 << 10)) {
-			udelay(1);
-			int_status = BONITO_INTISR;
-		}
-	}
-
-	/* Get pending sources, masked by current enables */
-	int_status = BONITO_INTISR & BONITO_INTEN;
-
-	if (int_status != 0) {
-		i = __ffs(int_status);
-		int_status &= ~(1 << i);
-		do_IRQ(BONITO_IRQ_BASE + i);
-	}
-}
-
-static void i8259_irqdispatch(void)
-{
-	int irq;
-
-	irq = i8259_irq();
-	if (irq >= 0) {
-		do_IRQ(irq);
-	} else {
-		spurious_interrupt();
-	}
-
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
-	if (pending & CAUSEF_IP7) {
-		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-	} else if (pending & CAUSEF_IP5) {
-		i8259_irqdispatch();
-	} else if (pending & CAUSEF_IP2) {
-		bonito_irqdispatch();
-	} else {
-		spurious_interrupt();
-	}
-}
-
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-};
-
-void __init arch_init_irq(void)
-{
-	extern void bonito_irq_init(void);
-
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 * int-handler is not on bootstrap
-	 */
-	clear_c0_status(ST0_IM | ST0_BEV);
-	local_irq_disable();
-
-	/* most bonito irq should be level triggered */
-	BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
-		BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
-	BONITO_INTSTEER = 0;
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	BONITO_INTENCLR = ~0;
-
-	/* init all controller
-	 *   0-15         ------> i8259 interrupt
-	 *   16-23        ------> mips cpu interrupt
-	 *   32-63        ------> bonito irq
-	 */
-
-	/* Sets the first-level interrupt dispatcher. */
-	mips_cpu_irq_init();
-	init_i8259_irqs();
-	bonito_irq_init();
-
-	/*
-	printk("GPIODATA=%x, GPIOIE=%x\n", BONITO_GPIODATA, BONITO_GPIOIE);
-	printk("INTEN=%x, INTSET=%x, INTCLR=%x, INTISR=%x\n",
-			BONITO_INTEN, BONITO_INTENSET,
-			BONITO_INTENCLR, BONITO_INTISR);
-	*/
-
-	/* bonito irq at IP2 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
-	/* 8259 irq at IP5 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
-
-}
diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c
deleted file mode 100644
index 8be03a8e1ad4..000000000000
--- a/arch/mips/lemote/lm2e/pci.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * pci.c
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/mips-boards/bonito64.h>
-#include <asm/mach-lemote/pci.h>
-
-extern struct pci_ops bonito64_pci_ops;
-
-static struct resource loongson2e_pci_mem_resource = {
-	.name   = "LOONGSON2E PCI MEM",
-	.start  = LOONGSON2E_PCI_MEM_START,
-	.end    = LOONGSON2E_PCI_MEM_END,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct resource loongson2e_pci_io_resource = {
-	.name   = "LOONGSON2E PCI IO MEM",
-	.start  = LOONGSON2E_PCI_IO_START,
-	.end    = IO_SPACE_LIMIT,
-	.flags  = IORESOURCE_IO,
-};
-
-static struct pci_controller  loongson2e_pci_controller = {
-	.pci_ops        = &bonito64_pci_ops,
-	.io_resource    = &loongson2e_pci_io_resource,
-	.mem_resource   = &loongson2e_pci_mem_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_offset      = 0x00000000UL,
-};
-
-static void __init ict_pcimap(void)
-{
-	/*
-	 * local to PCI mapping: [256M,512M] -> [256M,512M]; differ from PMON
-	 *
-	 * CPU address space [256M,448M] is window for accessing pci space
-	 * we set pcimap_lo[0,1,2] to map it to pci space [256M,448M]
-	 * pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0
-	 */
-	/* 1,00 0110 ,0001 01,00 0000 */
-	BONITO_PCIMAP = 0x46140;
-
-	/* 1, 00 0010, 0000,01, 00 0000 */
-	/* BONITO_PCIMAP = 0x42040; */
-
-	/*
-	 * PCI to local mapping: [2G,2G+256M] -> [0,256M]
-	 */
-	BONITO_PCIBASE0 = 0x80000000;
-	BONITO_PCIBASE1 = 0x00800000;
-	BONITO_PCIBASE2 = 0x90000000;
-
-}
-
-static int __init pcibios_init(void)
-{
-	ict_pcimap();
-
-	loongson2e_pci_controller.io_map_base =
-	    (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE,
-				    loongson2e_pci_io_resource.end -
-				    loongson2e_pci_io_resource.start + 1);
-
-	register_pci_controller(&loongson2e_pci_controller);
-
-	return 0;
-}
-
-arch_initcall(pcibios_init);
diff --git a/arch/mips/lemote/lm2e/prom.c b/arch/mips/lemote/lm2e/prom.c
deleted file mode 100644
index 7edc15dfed6c..000000000000
--- a/arch/mips/lemote/lm2e/prom.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-
-extern unsigned long bus_clock;
-extern unsigned long cpu_clock_freq;
-extern unsigned int memsize, highmemsize;
-extern int putDebugChar(unsigned char byte);
-
-static int argc;
-/* pmon passes arguments in 32bit pointers */
-static int *arg;
-static int *env;
-
-const char *get_system_type(void)
-{
-	return "lemote-fulong";
-}
-
-void __init prom_init_cmdline(void)
-{
-	int i;
-	long l;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < argc; i++) {
-		l = (long)arg[i];
-		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, ((char *)l));
-		strcat(arcs_cmdline, " ");
-	}
-}
-
-void __init prom_init(void)
-{
-	long l;
-	argc = fw_arg0;
-	arg = (int *)fw_arg1;
-	env = (int *)fw_arg2;
-
-	prom_init_cmdline();
-
-	if ((strstr(arcs_cmdline, "console=")) == NULL)
-		strcat(arcs_cmdline, " console=ttyS0,115200");
-	if ((strstr(arcs_cmdline, "root=")) == NULL)
-		strcat(arcs_cmdline, " root=/dev/hda1");
-
-#define parse_even_earlier(res, option, p)				\
-do {									\
-	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-		res = simple_strtol((char *)p + strlen(option"="),	\
-				    NULL, 10);				\
-} while (0)
-
-	l = (long)*env;
-	while (l != 0) {
-		parse_even_earlier(bus_clock, "busclock", l);
-		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
-		parse_even_earlier(memsize, "memsize", l);
-		parse_even_earlier(highmemsize, "highmemsize", l);
-		env++;
-		l = (long)*env;
-	}
-	if (memsize == 0)
-		memsize = 256;
-
-	pr_info("busclock=%ld, cpuclock=%ld,memsize=%d,highmemsize=%d\n",
-	       bus_clock, cpu_clock_freq, memsize, highmemsize);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void prom_putchar(char c)
-{
-	putDebugChar(c);
-}
diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c
deleted file mode 100644
index 099387a3827a..000000000000
--- a/arch/mips/lemote/lm2e/reset.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- */
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-
-static void loongson2e_restart(char *command)
-{
-#ifdef CONFIG_32BIT
-	*(unsigned long *)0xbfe00104 &= ~(1 << 2);
-	*(unsigned long *)0xbfe00104 |= (1 << 2);
-#else
-	*(unsigned long *)0xffffffffbfe00104 &= ~(1 << 2);
-	*(unsigned long *)0xffffffffbfe00104 |= (1 << 2);
-#endif
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void loongson2e_halt(void)
-{
-	while (1) ;
-}
-
-static void loongson2e_power_off(void)
-{
-	loongson2e_halt();
-}
-
-void mips_reboot_setup(void)
-{
-	_machine_restart = loongson2e_restart;
-	_machine_halt = loongson2e_halt;
-	pm_power_off = loongson2e_power_off;
-}
diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c
deleted file mode 100644
index ebd6ceaef2fd..000000000000
--- a/arch/mips/lemote/lm2e/setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * setup.c - board dependent boot routines
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/bootmem.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mc146818-time.h>
-#include <asm/time.h>
-#include <asm/wbflush.h>
-#include <asm/mach-lemote/pci.h>
-
-#ifdef CONFIG_VT
-#include <linux/console.h>
-#include <linux/screen_info.h>
-#endif
-
-extern void mips_reboot_setup(void);
-
-unsigned long cpu_clock_freq;
-unsigned long bus_clock;
-unsigned int memsize;
-unsigned int highmemsize = 0;
-
-void __init plat_time_init(void)
-{
-	/* setup mips r4k timer */
-	mips_hpt_frequency = cpu_clock_freq / 2;
-}
-
-unsigned long read_persistent_clock(void)
-{
-	return mc146818_get_cmos_time();
-}
-
-void (*__wbflush)(void);
-EXPORT_SYMBOL(__wbflush);
-
-static void wbflush_loongson2e(void)
-{
-	asm(".set\tpush\n\t"
-	    ".set\tnoreorder\n\t"
-	    ".set mips3\n\t"
-	    "sync\n\t"
-	    "nop\n\t"
-	    ".set\tpop\n\t"
-	    ".set mips0\n\t");
-}
-
-void __init plat_mem_setup(void)
-{
-	set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE,
-				IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1));
-	mips_reboot_setup();
-
-	__wbflush = wbflush_loongson2e;
-
-	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-#ifdef CONFIG_64BIT
-	if (highmemsize > 0) {
-		add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM);
-	}
-#endif
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-
-	screen_info = (struct screen_info) {
-		0, 25,		/* orig-x, orig-y */
-		    0,		/* unused */
-		    0,		/* orig-video-page */
-		    0,		/* orig-video-mode */
-		    80,		/* orig-video-cols */
-		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
-		    25,		/* orig-video-lines */
-		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
-		    16		/* orig-video-points */
-	};
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-
-}
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
new file mode 100644
index 000000000000..d45092505fa1
--- /dev/null
+++ b/arch/mips/loongson/Kconfig
@@ -0,0 +1,31 @@
+choice
+    prompt "Machine Type"
+    depends on MACH_LOONGSON
+
+config LEMOTE_FULOONG2E
+    bool "Lemote Fuloong(2e) mini-PC"
+    select ARCH_SPARSEMEM_ENABLE
+    select CEVT_R4K
+    select CSRC_R4K
+    select SYS_HAS_CPU_LOONGSON2E
+    select DMA_NONCOHERENT
+    select BOOT_ELF32
+    select BOARD_SCACHE
+    select HW_HAS_PCI
+    select I8259
+    select ISA
+    select IRQ_CPU
+    select SYS_SUPPORTS_32BIT_KERNEL
+    select SYS_SUPPORTS_64BIT_KERNEL
+    select SYS_SUPPORTS_LITTLE_ENDIAN
+    select SYS_SUPPORTS_HIGHMEM
+    select SYS_HAS_EARLY_PRINTK
+    select GENERIC_HARDIRQS_NO__DO_IRQ
+    select GENERIC_ISA_DMA_SUPPORT_BROKEN
+    select CPU_HAS_WB
+    help
+      Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
+      an FPGA northbridge
+
+      Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+endchoice
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
new file mode 100644
index 000000000000..39048c455d7d
--- /dev/null
+++ b/arch/mips/loongson/Makefile
@@ -0,0 +1,11 @@
+#
+# Common code for all Loongson based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON) += common/
+
+#
+# Lemote Fuloong mini-PC (Loongson 2E-based)
+#
+
+obj-$(CONFIG_LEMOTE_FULOONG2E)  += fuloong-2e/
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
new file mode 100644
index 000000000000..656b3cc0a2a6
--- /dev/null
+++ b/arch/mips/loongson/common/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for loongson based machines.
+#
+
+obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
+    pci.o bonito-irq.o mem.o machtype.o
+
+#
+# Early printk support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/lemote/lm2e/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c
index 8fc3bce7075b..3e31e7ad713e 100644
--- a/arch/mips/lemote/lm2e/bonito-irq.c
+++ b/arch/mips/loongson/common/bonito-irq.c
@@ -10,32 +10,10 @@
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/mips-boards/bonito64.h>
 
+#include <loongson.h>
 
 static inline void bonito_irq_enable(unsigned int irq)
 {
@@ -66,9 +44,8 @@ void bonito_irq_init(void)
 {
 	u32 i;
 
-	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) {
+	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
 		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
-	}
 
 	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
 }
diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c
new file mode 100644
index 000000000000..75f1b243ee4e
--- /dev/null
+++ b/arch/mips/loongson/common/cmdline.c
@@ -0,0 +1,52 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+int prom_argc;
+/* pmon passes arguments in 32bit pointers */
+int *_prom_argv;
+
+void __init prom_init_cmdline(void)
+{
+	int i;
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	prom_argc = fw_arg0;
+	_prom_argv = (int *)fw_arg1;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < prom_argc; i++) {
+		l = (long)_prom_argv[i];
+		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, ((char *)l));
+		strcat(arcs_cmdline, " ");
+	}
+
+	if ((strstr(arcs_cmdline, "console=")) == NULL)
+		strcat(arcs_cmdline, " console=ttyS0,115200");
+	if ((strstr(arcs_cmdline, "root=")) == NULL)
+		strcat(arcs_cmdline, " root=/dev/hda1");
+}
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c
new file mode 100644
index 000000000000..bc73edc0cfd8
--- /dev/null
+++ b/arch/mips/loongson/common/early_printk.c
@@ -0,0 +1,38 @@
+/*  early printk support
+ *
+ *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ *  Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/serial_reg.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define PORT(base, offset) (u8 *)(base + offset)
+
+static inline unsigned int serial_in(phys_addr_t base, int offset)
+{
+	return readb(PORT(base, offset));
+}
+
+static inline void serial_out(phys_addr_t base, int offset, int value)
+{
+	writeb(value, PORT(base, offset));
+}
+
+void prom_putchar(char c)
+{
+	phys_addr_t uart_base =
+		(phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8);
+
+	while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(uart_base, UART_TX, c);
+}
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
new file mode 100644
index 000000000000..b9ef50385541
--- /dev/null
+++ b/arch/mips/loongson/common/env.c
@@ -0,0 +1,58 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+unsigned long bus_clock, cpu_clock_freq;
+unsigned long memsize, highmemsize;
+
+/* pmon passes arguments in 32bit pointers */
+int *_prom_envp;
+
+#define parse_even_earlier(res, option, p)				\
+do {									\
+	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
+			strict_strtol((char *)p + strlen(option"="),	\
+					10, &res);			\
+} while (0)
+
+void __init prom_init_env(void)
+{
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	_prom_envp = (int *)fw_arg2;
+
+	l = (long)*_prom_envp;
+	while (l != 0) {
+		parse_even_earlier(bus_clock, "busclock", l);
+		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
+		parse_even_earlier(memsize, "memsize", l);
+		parse_even_earlier(highmemsize, "highmemsize", l);
+		_prom_envp++;
+		l = (long)*_prom_envp;
+	}
+	if (memsize == 0)
+		memsize = 256;
+
+	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
+		bus_clock, cpu_clock_freq, memsize, highmemsize);
+}
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
new file mode 100644
index 000000000000..3abe927422a3
--- /dev/null
+++ b/arch/mips/loongson/common/init.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init prom_init(void)
+{
+    /* init base address of io space */
+	set_io_port_base((unsigned long)
+		ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
+
+	prom_init_cmdline();
+	prom_init_env();
+	prom_init_memory();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c
new file mode 100644
index 000000000000..f368c735cbd3
--- /dev/null
+++ b/arch/mips/loongson/common/irq.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+/*
+ * the first level int-handler will jump here if it is a bonito irq
+ */
+void bonito_irqdispatch(void)
+{
+	u32 int_status;
+	int i;
+
+	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
+	int_status = BONITO_INTISR;
+	if (int_status & (1 << 10)) {
+		while (int_status & (1 << 10)) {
+			udelay(1);
+			int_status = BONITO_INTISR;
+		}
+	}
+
+	/* Get pending sources, masked by current enables */
+	int_status = BONITO_INTISR & BONITO_INTEN;
+
+	if (int_status != 0) {
+		i = __ffs(int_status);
+		int_status &= ~(1 << i);
+		do_IRQ(BONITO_IRQ_BASE + i);
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending;
+
+	pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	/* machine-specific plat_irq_dispatch */
+	mach_irq_dispatch(pending);
+}
+
+void __init arch_init_irq(void)
+{
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 * int-handler is not on bootstrap
+	 */
+	clear_c0_status(ST0_IM | ST0_BEV);
+	local_irq_disable();
+
+	/* setting irq trigger mode */
+	set_irq_trigger_mode();
+
+	/* no steer */
+	BONITO_INTSTEER = 0;
+
+	/*
+	 * Mask out all interrupt by writing "1" to all bit position in
+	 * the interrupt reset reg.
+	 */
+	BONITO_INTENCLR = ~0;
+
+	/* machine specific irq init */
+	mach_init_irq();
+}
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
new file mode 100644
index 000000000000..7b348248de7d
--- /dev/null
+++ b/arch/mips/loongson/common/machtype.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+static const char *system_types[] = {
+	[MACH_LOONGSON_UNKNOWN]         "unknown loongson machine",
+	[MACH_LEMOTE_FL2E]              "lemote-fuloong-2e-box",
+	[MACH_LEMOTE_FL2F]              "lemote-fuloong-2f-box",
+	[MACH_LEMOTE_ML2F7]             "lemote-mengloong-2f-7inches",
+	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
+	[MACH_DEXXON_GDIUM2F10]         "dexxon-gidum-2f-10inches",
+	[MACH_LOONGSON_END]             NULL,
+};
+
+const char *get_system_type(void)
+{
+	if (mips_machtype == MACH_UNKNOWN)
+		mips_machtype = LOONGSON_MACHTYPE;
+
+	return system_types[mips_machtype];
+}
+
+static __init int machtype_setup(char *str)
+{
+	int machtype = MACH_LEMOTE_FL2E;
+
+	if (!str)
+		return -EINVAL;
+
+	for (; system_types[machtype]; machtype++)
+		if (strstr(system_types[machtype], str)) {
+			mips_machtype = machtype;
+			break;
+		}
+	return 0;
+}
+__setup("machtype=", machtype_setup);
diff --git a/arch/mips/lemote/lm2e/mem.c b/arch/mips/loongson/common/mem.c
index 16cd21587d34..7c92f79b6480 100644
--- a/arch/mips/lemote/lm2e/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -8,16 +8,28 @@
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <mem.h>
+
+void __init prom_init_memory(void)
+{
+    add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+#ifdef CONFIG_64BIT
+    if (highmemsize > 0)
+	add_memory_region(LOONGSON_HIGHMEM_START,
+		highmemsize << 20, BOOT_MEM_RAM);
+#endif /* CONFIG_64BIT */
+}
+
 /* override of arch/mips/mm/cache.c: __uncached_access */
 int __uncached_access(struct file *file, unsigned long addr)
 {
 	if (file->f_flags & O_SYNC)
 		return 1;
 
-	/*
-	 * On the Lemote Loongson 2e system, the peripheral registers
-	 * reside between 0x1000:0000 and 0x2000:0000.
-	 */
 	return addr >= __pa(high_memory) ||
-		((addr >= 0x10000000) && (addr < 0x20000000));
+		((addr >= LOONGSON_MMIO_MEM_START) &&
+		 (addr < LOONGSON_MMIO_MEM_END));
 }
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
new file mode 100644
index 000000000000..a3a4abfb6c9a
--- /dev/null
+++ b/arch/mips/loongson/common/pci.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/pci.h>
+
+#include <pci.h>
+#include <loongson.h>
+
+static struct resource loongson_pci_mem_resource = {
+	.name   = "pci memory space",
+	.start  = LOONGSON_PCI_MEM_START,
+	.end    = LOONGSON_PCI_MEM_END,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct resource loongson_pci_io_resource = {
+	.name   = "pci io space",
+	.start  = LOONGSON_PCI_IO_START,
+	.end    = IO_SPACE_LIMIT,
+	.flags  = IORESOURCE_IO,
+};
+
+static struct pci_controller  loongson_pci_controller = {
+	.pci_ops        = &bonito64_pci_ops,
+	.io_resource    = &loongson_pci_io_resource,
+	.mem_resource   = &loongson_pci_mem_resource,
+	.mem_offset     = 0x00000000UL,
+	.io_offset      = 0x00000000UL,
+};
+
+static void __init setup_pcimap(void)
+{
+	/*
+	 * local to PCI mapping for CPU accessing PCI space
+	 * CPU address space [256M,448M] is window for accessing pci space
+	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+	 *
+	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
+	 */
+	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
+		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
+		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
+		BONITO_PCIMAP_WIN(0, 0);
+
+	/*
+	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
+	 */
+	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
+	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
+	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+	/* avoid deadlock of PCI reading/writing lock operation */
+	LOONGSON_PCI_ISR4C = 0xd2000001ul;
+
+	/* can not change gnt to break pci transfer when device's gnt not
+	deassert for some broken device */
+	LOONGSON_PXARB_CFG = 0x00fe0105ul;
+}
+
+static int __init pcibios_init(void)
+{
+	setup_pcimap();
+
+	loongson_pci_controller.io_map_base = mips_io_port_base;
+
+	register_pci_controller(&loongson_pci_controller);
+
+	return 0;
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
new file mode 100644
index 000000000000..97e918251edd
--- /dev/null
+++ b/arch/mips/loongson/common/reset.c
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Zhangjin Wu, wuzj@lemote.com
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+
+#include <loongson.h>
+
+static void loongson_restart(char *command)
+{
+	/* do preparation for reboot */
+	mach_prepare_reboot();
+
+	/* reboot via jumping to boot base address */
+	((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
+}
+
+static void loongson_halt(void)
+{
+	mach_prepare_shutdown();
+	while (1)
+		;
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = loongson_restart;
+	_machine_halt = loongson_halt;
+	pm_power_off = loongson_halt;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c
new file mode 100644
index 000000000000..4cd2aa9a342c
--- /dev/null
+++ b/arch/mips/loongson/common/setup.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/module.h>
+
+#include <asm/wbflush.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#include <linux/screen_info.h>
+#endif
+
+void (*__wbflush)(void);
+EXPORT_SYMBOL(__wbflush);
+
+static void wbflush_loongson(void)
+{
+	asm(".set\tpush\n\t"
+	    ".set\tnoreorder\n\t"
+	    ".set mips3\n\t"
+	    "sync\n\t"
+	    "nop\n\t"
+	    ".set\tpop\n\t"
+	    ".set mips0\n\t");
+}
+
+void __init plat_mem_setup(void)
+{
+	__wbflush = wbflush_loongson;
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+
+	screen_info = (struct screen_info) {
+		0, 25,		/* orig-x, orig-y */
+		    0,		/* unused */
+		    0,		/* orig-video-page */
+		    0,		/* orig-video-mode */
+		    80,		/* orig-video-cols */
+		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
+		    25,		/* orig-video-lines */
+		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
+		    16		/* orig-video-points */
+	};
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
new file mode 100644
index 000000000000..0edbef32b862
--- /dev/null
+++ b/arch/mips/loongson/common/time.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+
+#include <loongson.h>
+
+void __init plat_time_init(void)
+{
+	/* setup mips r4k timer */
+	mips_hpt_frequency = cpu_clock_freq / 2;
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+	ts->tv_sec = return mc146818_get_cmos_time();
+	ts->tv_nsec = 0;
+}
diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile
new file mode 100644
index 000000000000..3aba5fcc09dc
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for Lemote Fuloong2e mini-PC board.
+#
+
+obj-y += irq.o reset.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
new file mode 100644
index 000000000000..7888cf69424a
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+
+#include <loongson.h>
+
+static void i8259_irqdispatch(void)
+{
+	int irq;
+
+	irq = i8259_irq();
+	if (irq >= 0)
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+asmlinkage void mach_irq_dispatch(unsigned int pending)
+{
+	if (pending & CAUSEF_IP7)
+		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
+		do_IRQ(LOONGSON2_PERFCNT_IRQ);
+	else if (pending & CAUSEF_IP5)
+		i8259_irqdispatch();
+	else if (pending & CAUSEF_IP2)
+		bonito_irqdispatch();
+	else
+		spurious_interrupt();
+}
+
+static struct irqaction cascade_irqaction = {
+	.handler = no_action,
+	.name = "cascade",
+};
+
+void __init set_irq_trigger_mode(void)
+{
+	/* most bonito irq should be level triggered */
+	BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
+	    BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
+}
+
+void __init mach_init_irq(void)
+{
+	/* init all controller
+	 *   0-15         ------> i8259 interrupt
+	 *   16-23        ------> mips cpu interrupt
+	 *   32-63        ------> bonito irq
+	 */
+
+	/* Sets the first-level interrupt dispatcher. */
+	mips_cpu_irq_init();
+	init_i8259_irqs();
+	bonito_irq_init();
+
+	/* bonito irq at IP2 */
+	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
+	/* 8259 irq at IP5 */
+	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
+}
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c
new file mode 100644
index 000000000000..677fe186db95
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/reset.c
@@ -0,0 +1,23 @@
+/* Board-specific reboot/shutdown routines
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <loongson.h>
+
+void mach_prepare_reboot(void)
+{
+	BONITO_BONGENCFG &= ~(1 << 2);
+	BONITO_BONGENCFG |= (1 << 2);
+}
+
+void mach_prepare_shutdown(void)
+{
+}
diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c
index 7c7148ef2646..2877675c5f0d 100644
--- a/arch/mips/mipssim/sim_setup.c
+++ b/arch/mips/mipssim/sim_setup.c
@@ -37,7 +37,7 @@
 
 
 static void __init serial_init(void);
-unsigned int _isbonito = 0;
+unsigned int _isbonito;
 
 const char *get_system_type(void)
 {
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index f956ecbb8136..e97a7a2fb2c0 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -58,11 +58,17 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
+#ifdef CONFIG_64BIT
+# define VMALLOC_FAULT_TARGET no_context
+#else
+# define VMALLOC_FAULT_TARGET vmalloc_fault
+#endif
+
 	if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
-		goto vmalloc_fault;
+		goto VMALLOC_FAULT_TARGET;
 #ifdef MODULE_START
 	if (unlikely(address >= MODULE_START && address < MODULE_END))
-		goto vmalloc_fault;
+		goto VMALLOC_FAULT_TARGET;
 #endif
 
 	/*
@@ -203,6 +209,7 @@ do_sigbus:
 	force_sig_info(SIGBUS, &info, tsk);
 
 	return;
+#ifndef CONFIG_64BIT
 vmalloc_fault:
 	{
 		/*
@@ -241,4 +248,5 @@ vmalloc_fault:
 			goto no_context;
 		return;
 	}
+#endif
 }
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 0e820508ff23..38c79c55b060 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -475,9 +475,6 @@ unsigned long pgd_current[NR_CPUS];
  */
 pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER);
 #ifdef CONFIG_64BIT
-#ifdef MODULE_START
-pgd_t module_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER);
-#endif
 pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned(PMD_ORDER);
 #endif
 pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index e4b565aeb008..1121019fa456 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -59,9 +59,6 @@ void __init pagetable_init(void)
 
 	/* Initialize the entire pgd.  */
 	pgd_init((unsigned long)swapper_pg_dir);
-#ifdef MODULE_START
-	pgd_init((unsigned long)module_pg_dir);
-#endif
 	pmd_init((unsigned long)invalid_pmd_table, (unsigned long)invalid_pte_table);
 
 	pgd_base = swapper_pg_dir;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index cee502caf398..d73428b18b0a 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -475,7 +475,7 @@ static void __cpuinit probe_tlb(unsigned long config)
 	c->tlbsize = ((reg >> 25) & 0x3f) + 1;
 }
 
-static int __cpuinitdata ntlb = 0;
+static int __cpuinitdata ntlb;
 static int __init set_ntlb(char *str)
 {
 	get_option(&str, &ntlb);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 9a17bf8395df..bb1719a55d22 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -321,6 +321,10 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_BCM3302:
 	case CPU_BCM4710:
 	case CPU_LOONGSON2:
+	case CPU_BCM6338:
+	case CPU_BCM6345:
+	case CPU_BCM6348:
+	case CPU_BCM6358:
 	case CPU_R5500:
 		if (m4kc_tlbp_war())
 			uasm_i_nop(p);
@@ -499,11 +503,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
-#ifdef MODULE_START
-	uasm_il_bltz(p, r, tmp, label_module_alloc);
-#else
 	uasm_il_bltz(p, r, tmp, label_vmalloc);
-#endif
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_SMP
@@ -556,52 +556,7 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 {
 	long swpd = (long)swapper_pg_dir;
 
-#ifdef MODULE_START
-	long modd = (long)module_pg_dir;
-
-	uasm_l_module_alloc(l, *p);
-	/*
-	 * Assumption:
-	 * VMALLOC_START >= 0xc000000000000000UL
-	 * MODULE_START >= 0xe000000000000000UL
-	 */
-	UASM_i_SLL(p, ptr, bvaddr, 2);
-	uasm_il_bgez(p, r, ptr, label_vmalloc);
-
-	if (uasm_in_compat_space_p(MODULE_START) &&
-	    !uasm_rel_lo(MODULE_START)) {
-		uasm_i_lui(p, ptr, uasm_rel_hi(MODULE_START)); /* delay slot */
-	} else {
-		/* unlikely configuration */
-		uasm_i_nop(p); /* delay slot */
-		UASM_i_LA(p, ptr, MODULE_START);
-	}
-	uasm_i_dsubu(p, bvaddr, bvaddr, ptr);
-
-	if (uasm_in_compat_space_p(modd) && !uasm_rel_lo(modd)) {
-		uasm_il_b(p, r, label_vmalloc_done);
-		uasm_i_lui(p, ptr, uasm_rel_hi(modd));
-	} else {
-		UASM_i_LA_mostly(p, ptr, modd);
-		uasm_il_b(p, r, label_vmalloc_done);
-		if (uasm_in_compat_space_p(modd))
-			uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(modd));
-		else
-			uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(modd));
-	}
-
 	uasm_l_vmalloc(l, *p);
-	if (uasm_in_compat_space_p(MODULE_START) &&
-	    !uasm_rel_lo(MODULE_START) &&
-	    MODULE_START << 32 == VMALLOC_START)
-		uasm_i_dsll32(p, ptr, ptr, 0);	/* typical case */
-	else
-		UASM_i_LA(p, ptr, VMALLOC_START);
-#else
-	uasm_l_vmalloc(l, *p);
-	UASM_i_LA(p, ptr, VMALLOC_START);
-#endif
-	uasm_i_dsubu(p, bvaddr, bvaddr, ptr);
 
 	if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
 		uasm_il_b(p, r, label_vmalloc_done);
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 27c807b67fea..f1b14c8a4a1c 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -47,7 +47,7 @@ int *_prom_argv, *_prom_envp;
  */
 #define prom_envp(index) ((char *)(long)_prom_envp[(index)])
 
-int init_debug = 0;
+int init_debug;
 
 static int mips_revision_corid;
 int mips_revision_sconid;
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index f48d60e84290..329420536241 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -22,6 +22,7 @@
  * Reset the MIPS boards.
  *
  */
+#include <linux/init.h>
 #include <linux/pm.h>
 
 #include <asm/io.h>
@@ -45,9 +46,13 @@ static void mips_machine_halt(void)
 }
 
 
-void mips_reboot_setup(void)
+static int __init mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
 	_machine_halt = mips_machine_halt;
 	pm_power_off = mips_machine_halt;
+
+	return 0;
 }
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index dc78b8983eeb..b7f37d4982fa 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -218,7 +218,6 @@ void __init plat_mem_setup(void)
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	screen_info_setup();
 #endif
-	mips_reboot_setup();
 
 	board_be_init = malta_be_init;
 	board_be_handler = malta_be_handler;
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 0b97d47691fc..3c6f190aa61c 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -100,9 +100,10 @@ static unsigned int __init estimate_cpu_frequency(void)
 	return count;
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	return mc146818_get_cmos_time();
+	ts->tv_sec = mc146818_get_cmos_time();
+	ts->tv_nsec = 0;
 }
 
 static void __init plat_perf_setup(void)
diff --git a/arch/mips/nxp/pnx833x/stb22x/board.c b/arch/mips/nxp/pnx833x/stb22x/board.c
index 90cc604bdadf..644eb7c3210f 100644
--- a/arch/mips/nxp/pnx833x/stb22x/board.c
+++ b/arch/mips/nxp/pnx833x/stb22x/board.c
@@ -39,7 +39,7 @@
 #define PNX8335_DEBUG7 0x441c
 
 int prom_argc;
-char **prom_argv = 0, **prom_envp = 0;
+char **prom_argv, **prom_envp;
 
 extern void prom_init_cmdline(void);
 extern char *prom_getenv(char *envname);
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index acf1fa889444..af094cd1d85b 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -69,9 +69,9 @@ static int pnx8550_registers_read(char* page, char** start, off_t offset, int co
         return len;
 }
 
-static struct proc_dir_entry* pnx8550_dir        = NULL;
-static struct proc_dir_entry* pnx8550_timers     = NULL;
-static struct proc_dir_entry* pnx8550_registers  = NULL;
+static struct proc_dir_entry* pnx8550_dir;
+static struct proc_dir_entry* pnx8550_timers;
+static struct proc_dir_entry* pnx8550_registers;
 
 static int pnx8550_proc_init( void )
 {
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
index bf3be6fcf7ff..02cc65e52d11 100644
--- a/arch/mips/oprofile/Makefile
+++ b/arch/mips/oprofile/Makefile
@@ -15,3 +15,4 @@ oprofile-$(CONFIG_CPU_MIPS64)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_R10000)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_SB1)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_RM9000)		+= op_model_rm9000.o
+oprofile-$(CONFIG_CPU_LOONGSON2)	+= op_model_loongson2.o
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 3bf3354547f6..7832ad257a14 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -16,6 +16,7 @@
 
 extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
 extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
+extern struct op_mips_model op_model_loongson2_ops __attribute__((weak));
 
 static struct op_mips_model *model;
 
@@ -93,6 +94,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_RM9000:
 		lmodel = &op_model_rm9000_ops;
 		break;
+	case CPU_LOONGSON2:
+		lmodel = &op_model_loongson2_ops;
+		break;
 	};
 
 	if (!lmodel)
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
new file mode 100644
index 000000000000..655cb8dec340
--- /dev/null
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -0,0 +1,177 @@
+/*
+ * Loongson2 performance counter driver for oprofile
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua <yanh@lemote.com>
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+
+#include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
+#include "op_impl.h"
+
+/*
+ * a patch should be sent to oprofile with the loongson-specific support.
+ * otherwise, the oprofile tool will not recognize this and complain about
+ * "cpu_type 'unset' is not valid".
+ */
+#define LOONGSON2_CPU_TYPE	"mips/godson2"
+
+#define LOONGSON2_COUNTER1_EVENT(event)	((event & 0x0f) << 5)
+#define LOONGSON2_COUNTER2_EVENT(event)	((event & 0x0f) << 9)
+
+#define LOONGSON2_PERFCNT_EXL			(1UL	<<  0)
+#define LOONGSON2_PERFCNT_KERNEL		(1UL    <<  1)
+#define LOONGSON2_PERFCNT_SUPERVISOR	(1UL    <<  2)
+#define LOONGSON2_PERFCNT_USER			(1UL    <<  3)
+#define LOONGSON2_PERFCNT_INT_EN		(1UL    <<  4)
+#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL   << 31)
+
+/* Loongson2 performance counter register */
+#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
+#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
+#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
+
+static struct loongson2_register_config {
+	unsigned int ctrl;
+	unsigned long long reset_counter1;
+	unsigned long long reset_counter2;
+	int cnt1_enalbed, cnt2_enalbed;
+} reg;
+
+DEFINE_SPINLOCK(sample_lock);
+
+static char *oprofid = "LoongsonPerf";
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
+/* Compute all of the registers in preparation for enabling profiling.  */
+
+static void loongson2_reg_setup(struct op_counter_config *cfg)
+{
+	unsigned int ctrl = 0;
+
+	reg.reset_counter1 = 0;
+	reg.reset_counter2 = 0;
+	/* Compute the performance counter ctrl word.  */
+	/* For now count kernel and user mode */
+	if (cfg[0].enabled) {
+		ctrl |= LOONGSON2_COUNTER1_EVENT(cfg[0].event);
+		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
+	}
+
+	if (cfg[1].enabled) {
+		ctrl |= LOONGSON2_COUNTER2_EVENT(cfg[1].event);
+		reg.reset_counter2 = (0x80000000ULL - cfg[1].count);
+	}
+
+	if (cfg[0].enabled || cfg[1].enabled) {
+		ctrl |= LOONGSON2_PERFCNT_EXL | LOONGSON2_PERFCNT_INT_EN;
+		if (cfg[0].kernel || cfg[1].kernel)
+			ctrl |= LOONGSON2_PERFCNT_KERNEL;
+		if (cfg[0].user || cfg[1].user)
+			ctrl |= LOONGSON2_PERFCNT_USER;
+	}
+
+	reg.ctrl = ctrl;
+
+	reg.cnt1_enalbed = cfg[0].enabled;
+	reg.cnt2_enalbed = cfg[1].enabled;
+
+}
+
+/* Program all of the registers in preparation for enabling profiling.  */
+
+static void loongson2_cpu_setup(void *args)
+{
+	uint64_t perfcount;
+
+	perfcount = (reg.reset_counter2 << 32) | reg.reset_counter1;
+	write_c0_perfcnt(perfcount);
+}
+
+static void loongson2_cpu_start(void *args)
+{
+	/* Start all counters on current CPU */
+	if (reg.cnt1_enalbed || reg.cnt2_enalbed)
+		write_c0_perfctrl(reg.ctrl);
+}
+
+static void loongson2_cpu_stop(void *args)
+{
+	/* Stop all counters on current CPU */
+	write_c0_perfctrl(0);
+	memset(&reg, 0, sizeof(reg));
+}
+
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
+{
+	uint64_t counter, counter1, counter2;
+	struct pt_regs *regs = get_irq_regs();
+	int enabled;
+	unsigned long flags;
+
+	/*
+	 * LOONGSON2 defines two 32-bit performance counters.
+	 * To avoid a race updating the registers we need to stop the counters
+	 * while we're messing with
+	 * them ...
+	 */
+
+	/* Check whether the irq belongs to me */
+	enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
+	if (!enabled)
+		return IRQ_NONE;
+
+	counter = read_c0_perfcnt();
+	counter1 = counter & 0xffffffff;
+	counter2 = counter >> 32;
+
+	spin_lock_irqsave(&sample_lock, flags);
+
+	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
+		if (reg.cnt1_enalbed)
+			oprofile_add_sample(regs, 0);
+		counter1 = reg.reset_counter1;
+	}
+	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
+		if (reg.cnt2_enalbed)
+			oprofile_add_sample(regs, 1);
+		counter2 = reg.reset_counter2;
+	}
+
+	spin_unlock_irqrestore(&sample_lock, flags);
+
+	write_c0_perfcnt((counter2 << 32) | counter1);
+
+	return IRQ_HANDLED;
+}
+
+static int __init loongson2_init(void)
+{
+	return request_irq(LOONGSON2_PERFCNT_IRQ, loongson2_perfcount_handler,
+			   IRQF_SHARED, "Perfcounter", oprofid);
+}
+
+static void loongson2_exit(void)
+{
+	write_c0_perfctrl(0);
+	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
+}
+
+struct op_mips_model op_model_loongson2_ops = {
+	.reg_setup = loongson2_reg_setup,
+	.cpu_setup = loongson2_cpu_setup,
+	.init = loongson2_init,
+	.exit = loongson2_exit,
+	.cpu_start = loongson2_cpu_start,
+	.cpu_stop = loongson2_cpu_stop,
+	.cpu_type = LOONGSON2_CPU_TYPE,
+	.num_counters = 2
+};
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 63d8a297c58d..91bfe73a7f60 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_NEC_MARKEINS)	+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
+obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
+					ops-bcm63xx.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
@@ -26,7 +28,7 @@ obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
-obj-$(CONFIG_LEMOTE_FULONG)	+= fixup-lm2e.o ops-bonito64.o
+obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-bonito64.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o
diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c
new file mode 100644
index 000000000000..340863009da9
--- /dev/null
+++ b/arch/mips/pci/fixup-bcm63xx.c
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <bcm63xx_cpu.h>
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return bcm63xx_get_irq_number(IRQ_PCI);
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-fuloong2e.c
index e18ae4f574c1..0c4c7a81213f 100644
--- a/arch/mips/pci/fixup-lm2e.c
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -1,6 +1,4 @@
 /*
- * fixup-lm2e.c
- *
  * Copyright (C) 2004 ICT CAS
  * Author: Li xiaoyu, ICT CAS
  *   lixy@ict.ac.cn
@@ -12,22 +10,6 @@
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
 #include <linux/init.h>
 #include <linux/pci.h>
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
new file mode 100644
index 000000000000..822ae179bc56
--- /dev/null
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -0,0 +1,467 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * swizzle 32bits data to return only the needed part
+ */
+static int postprocess_read(u32 data, int where, unsigned int size)
+{
+	u32 ret;
+
+	ret = 0;
+	switch (size) {
+	case 1:
+		ret = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		ret = (data >> ((where & 3) << 3)) & 0xffff;
+		break;
+	case 4:
+		ret = data;
+		break;
+	}
+	return ret;
+}
+
+static int preprocess_write(u32 orig_data, u32 val, int where,
+			    unsigned int size)
+{
+	u32 ret;
+
+	ret = 0;
+	switch (size) {
+	case 1:
+		ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 2:
+		ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 4:
+		ret = val;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * setup hardware for a configuration cycle with given parameters
+ */
+static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
+				    unsigned int devfn, int where)
+{
+	unsigned int slot, func, reg;
+	u32 val;
+
+	slot = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+	reg = where >> 2;
+
+	/* sanity check */
+	if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
+		return 1;
+
+	if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
+		return 1;
+
+	if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
+		return 1;
+
+	/* ok, setup config access */
+	val = (reg << MPI_L2PCFG_REG_SHIFT);
+	val |= (func << MPI_L2PCFG_FUNC_SHIFT);
+	val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
+	val |= MPI_L2PCFG_CFG_USEREG_MASK;
+	val |= MPI_L2PCFG_CFG_SEL_MASK;
+	/* type 0 cycle for local bus, type 1 cycle for anything else */
+	if (type != 0) {
+		/* FIXME: how to specify bus ??? */
+		val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
+	}
+	bcm_mpi_writel(val, MPI_L2PCFG_REG);
+
+	return 0;
+}
+
+static int bcm63xx_do_cfg_read(int type, unsigned int busn,
+				unsigned int devfn, int where, int size,
+				u32 *val)
+{
+	u32 data;
+
+	/* two phase cycle, first we write address, then read data at
+	 * another location, caller already has a spinlock so no need
+	 * to add one here  */
+	if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	iob();
+	data = le32_to_cpu(__raw_readl(pci_iospace_start));
+	/* restore IO space normal behaviour */
+	bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+	*val = postprocess_read(data, where, size);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_do_cfg_write(int type, unsigned int busn,
+				 unsigned int devfn, int where, int size,
+				 u32 val)
+{
+	u32 data;
+
+	/* two phase cycle, first we write address, then write data to
+	 * another location, caller already has a spinlock so no need
+	 * to add one here  */
+	if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	iob();
+
+	data = le32_to_cpu(__raw_readl(pci_iospace_start));
+	data = preprocess_write(data, val, where, size);
+
+	__raw_writel(cpu_to_le32(data), pci_iospace_start);
+	wmb();
+	/* no way to know the access is done, we have to wait */
+	udelay(500);
+	/* restore IO space normal behaviour */
+	bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 *val)
+{
+	int type;
+
+	type = bus->parent ? 1 : 0;
+
+	if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return bcm63xx_do_cfg_read(type, bus->number, devfn,
+				    where, size, val);
+}
+
+static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 val)
+{
+	int type;
+
+	type = bus->parent ? 1 : 0;
+
+	if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return bcm63xx_do_cfg_write(type, bus->number, devfn,
+				     where, size, val);
+}
+
+struct pci_ops bcm63xx_pci_ops = {
+	.read   = bcm63xx_pci_read,
+	.write  = bcm63xx_pci_write
+};
+
+#ifdef CONFIG_CARDBUS
+/*
+ * emulate configuration read access on a cardbus bridge
+ */
+#define FAKE_CB_BRIDGE_SLOT	0x1e
+
+static int fake_cb_bridge_bus_number = -1;
+
+static struct {
+	u16 pci_command;
+	u8 cb_latency;
+	u8 subordinate_busn;
+	u8 cardbus_busn;
+	u8 pci_busn;
+	int bus_assigned;
+	u16 bridge_control;
+
+	u32 mem_base0;
+	u32 mem_limit0;
+	u32 mem_base1;
+	u32 mem_limit1;
+
+	u32 io_base0;
+	u32 io_limit0;
+	u32 io_base1;
+	u32 io_limit1;
+} fake_cb_bridge_regs;
+
+static int fake_cb_bridge_read(int where, int size, u32 *val)
+{
+	unsigned int reg;
+	u32 data;
+
+	data = 0;
+	reg = where >> 2;
+	switch (reg) {
+	case (PCI_VENDOR_ID >> 2):
+	case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
+		/* create dummy vendor/device id from our cpu id */
+		data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
+		break;
+
+	case (PCI_COMMAND >> 2):
+		data = (PCI_STATUS_DEVSEL_SLOW << 16);
+		data |= fake_cb_bridge_regs.pci_command;
+		break;
+
+	case (PCI_CLASS_REVISION >> 2):
+		data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
+		break;
+
+	case (PCI_CACHE_LINE_SIZE >> 2):
+		data = (PCI_HEADER_TYPE_CARDBUS << 16);
+		break;
+
+	case (PCI_INTERRUPT_LINE >> 2):
+		/* bridge control */
+		data = (fake_cb_bridge_regs.bridge_control << 16);
+		/* pin:intA line:0xff */
+		data |= (0x1 << 8) | 0xff;
+		break;
+
+	case (PCI_CB_PRIMARY_BUS >> 2):
+		data = (fake_cb_bridge_regs.cb_latency << 24);
+		data |= (fake_cb_bridge_regs.subordinate_busn << 16);
+		data |= (fake_cb_bridge_regs.cardbus_busn << 8);
+		data |= fake_cb_bridge_regs.pci_busn;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_0 >> 2):
+		data = fake_cb_bridge_regs.mem_base0;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_0 >> 2):
+		data = fake_cb_bridge_regs.mem_limit0;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_1 >> 2):
+		data = fake_cb_bridge_regs.mem_base1;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_1 >> 2):
+		data = fake_cb_bridge_regs.mem_limit1;
+		break;
+
+	case (PCI_CB_IO_BASE_0 >> 2):
+		/* | 1 for 32bits io support */
+		data = fake_cb_bridge_regs.io_base0 | 0x1;
+		break;
+
+	case (PCI_CB_IO_LIMIT_0 >> 2):
+		data = fake_cb_bridge_regs.io_limit0;
+		break;
+
+	case (PCI_CB_IO_BASE_1 >> 2):
+		/* | 1 for 32bits io support */
+		data = fake_cb_bridge_regs.io_base1 | 0x1;
+		break;
+
+	case (PCI_CB_IO_LIMIT_1 >> 2):
+		data = fake_cb_bridge_regs.io_limit1;
+		break;
+	}
+
+	*val = postprocess_read(data, where, size);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * emulate configuration write access on a cardbus bridge
+ */
+static int fake_cb_bridge_write(int where, int size, u32 val)
+{
+	unsigned int reg;
+	u32 data, tmp;
+	int ret;
+
+	ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
+
+	data = preprocess_write(data, val, where, size);
+
+	reg = where >> 2;
+	switch (reg) {
+	case (PCI_COMMAND >> 2):
+		fake_cb_bridge_regs.pci_command = (data & 0xffff);
+		break;
+
+	case (PCI_CB_PRIMARY_BUS >> 2):
+		fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
+		fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
+		fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
+		fake_cb_bridge_regs.pci_busn = data & 0xff;
+		if (fake_cb_bridge_regs.cardbus_busn)
+			fake_cb_bridge_regs.bus_assigned = 1;
+		break;
+
+	case (PCI_INTERRUPT_LINE >> 2):
+		tmp = (data >> 16) & 0xffff;
+		/* disable memory prefetch support */
+		tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
+		tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
+		fake_cb_bridge_regs.bridge_control = tmp;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_0 >> 2):
+		fake_cb_bridge_regs.mem_base0 = data;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_0 >> 2):
+		fake_cb_bridge_regs.mem_limit0 = data;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_1 >> 2):
+		fake_cb_bridge_regs.mem_base1 = data;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_1 >> 2):
+		fake_cb_bridge_regs.mem_limit1 = data;
+		break;
+
+	case (PCI_CB_IO_BASE_0 >> 2):
+		fake_cb_bridge_regs.io_base0 = data;
+		break;
+
+	case (PCI_CB_IO_LIMIT_0 >> 2):
+		fake_cb_bridge_regs.io_limit0 = data;
+		break;
+
+	case (PCI_CB_IO_BASE_1 >> 2):
+		fake_cb_bridge_regs.io_base1 = data;
+		break;
+
+	case (PCI_CB_IO_LIMIT_1 >> 2):
+		fake_cb_bridge_regs.io_limit1 = data;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *val)
+{
+	/* snoop access to slot 0x1e on root bus, we fake a cardbus
+	 * bridge at this location */
+	if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
+		fake_cb_bridge_bus_number = bus->number;
+		return fake_cb_bridge_read(where, size, val);
+	}
+
+	/* a  configuration  cycle for  the  device  behind the  cardbus
+	 * bridge is  actually done as a  type 0 cycle  on the primary
+	 * bus. This means that only  one device can be on the cardbus
+	 * bus */
+	if (fake_cb_bridge_regs.bus_assigned &&
+	    bus->number == fake_cb_bridge_regs.cardbus_busn &&
+	    PCI_SLOT(devfn) == 0)
+		return bcm63xx_do_cfg_read(0, 0,
+					   PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
+					   where, size, val);
+
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 val)
+{
+	if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
+		fake_cb_bridge_bus_number = bus->number;
+		return fake_cb_bridge_write(where, size, val);
+	}
+
+	if (fake_cb_bridge_regs.bus_assigned &&
+	    bus->number == fake_cb_bridge_regs.cardbus_busn &&
+	    PCI_SLOT(devfn) == 0)
+		return bcm63xx_do_cfg_write(0, 0,
+					    PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
+					    where, size, val);
+
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+struct pci_ops bcm63xx_cb_ops = {
+	.read   = bcm63xx_cb_read,
+	.write   = bcm63xx_cb_write,
+};
+
+/*
+ * only one IO window, so it  cannot be shared by PCI and cardbus, use
+ * fixup to choose and detect unhandled configuration
+ */
+static void bcm63xx_fixup(struct pci_dev *dev)
+{
+	static int io_window = -1;
+	int i, found, new_io_window;
+	u32 val;
+
+	/* look for any io resource */
+	found = 0;
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		return;
+
+	/* skip our fake bus with only cardbus bridge on it */
+	if (dev->bus->number == fake_cb_bridge_bus_number)
+		return;
+
+	/* find on which bus the device is */
+	if (fake_cb_bridge_regs.bus_assigned &&
+	    dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
+	    PCI_SLOT(dev->devfn) == 0)
+		new_io_window = 1;
+	else
+		new_io_window = 0;
+
+	if (new_io_window == io_window)
+		return;
+
+	if (io_window != -1) {
+		printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
+		       "need IO, which hardware cannot do\n");
+		return;
+	}
+
+	printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
+	       (new_io_window == 0) ? "PCI" : "cardbus");
+
+	val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
+	if (io_window)
+		val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
+	else
+		val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
+	bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
+
+	io_window = new_io_window;
+}
+
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
+#endif
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index f742c51acf0d..54e55e7a2431 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -29,7 +29,7 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
-#ifdef CONFIG_LEMOTE_FULONG
+#ifdef CONFIG_LEMOTE_FULOONG2E
 #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset))
 #define ID_SEL_BEGIN 11
 #else
@@ -77,7 +77,7 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
 	addrp = CFG_SPACE_REG(addr & 0xffff);
 	if (access_type == PCI_ACCESS_WRITE) {
 		writel(cpu_to_le32(*data), addrp);
-#ifndef CONFIG_LEMOTE_FULONG
+#ifndef CONFIG_LEMOTE_FULOONG2E
 		/* Wait till done */
 		while (BONITO_PCIMSTAT & 0xF);
 #endif
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index a9060c771840..6f5e24c6ae67 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -57,7 +57,7 @@ static void *cfg_space;
 #define PCI_BUS_ENABLED	1
 #define PCI_DEVICE_MODE	2
 
-static int bcm1480_bus_status = 0;
+static int bcm1480_bus_status;
 
 #define PCI_BRIDGE_DEVICE  0
 
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index f54f45412b0b..50cc6e9e8240 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -56,7 +56,7 @@ static void *ht_cfg_space;
 #define PCI_BUS_ENABLED	1
 #define PCI_DEVICE_MODE	2
 
-static int bcm1480ht_bus_status = 0;
+static int bcm1480ht_bus_status;
 
 #define PCI_BRIDGE_DEVICE  0
 #define HT_BRIDGE_DEVICE   1
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
new file mode 100644
index 000000000000..82e0fde1dba0
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * Allow PCI to be disabled at runtime depending on board nvram
+ * configuration
+ */
+int bcm63xx_pci_enabled;
+
+static struct resource bcm_pci_mem_resource = {
+	.name   = "bcm63xx PCI memory space",
+	.start  = BCM_PCI_MEM_BASE_PA,
+	.end    = BCM_PCI_MEM_END_PA,
+	.flags  = IORESOURCE_MEM
+};
+
+static struct resource bcm_pci_io_resource = {
+	.name   = "bcm63xx PCI IO space",
+	.start  = BCM_PCI_IO_BASE_PA,
+#ifdef CONFIG_CARDBUS
+	.end    = BCM_PCI_IO_HALF_PA,
+#else
+	.end    = BCM_PCI_IO_END_PA,
+#endif
+	.flags  = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_controller = {
+	.pci_ops	= &bcm63xx_pci_ops,
+	.io_resource	= &bcm_pci_io_resource,
+	.mem_resource	= &bcm_pci_mem_resource,
+};
+
+/*
+ * We handle cardbus  via a fake Cardbus bridge,  memory and io spaces
+ * have to be  clearly separated from PCI one  since we have different
+ * memory decoder.
+ */
+#ifdef CONFIG_CARDBUS
+static struct resource bcm_cb_mem_resource = {
+	.name   = "bcm63xx Cardbus memory space",
+	.start  = BCM_CB_MEM_BASE_PA,
+	.end    = BCM_CB_MEM_END_PA,
+	.flags  = IORESOURCE_MEM
+};
+
+static struct resource bcm_cb_io_resource = {
+	.name   = "bcm63xx Cardbus IO space",
+	.start  = BCM_PCI_IO_HALF_PA + 1,
+	.end    = BCM_PCI_IO_END_PA,
+	.flags  = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_cb_controller = {
+	.pci_ops	= &bcm63xx_cb_ops,
+	.io_resource	= &bcm_cb_io_resource,
+	.mem_resource	= &bcm_cb_mem_resource,
+};
+#endif
+
+static u32 bcm63xx_int_cfg_readl(u32 reg)
+{
+	u32 tmp;
+
+	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+	tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+	iob();
+	return bcm_mpi_readl(MPI_PCICFGDATA_REG);
+}
+
+static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
+{
+	u32 tmp;
+
+	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+	tmp |=  MPI_PCICFGCTL_WRITEEN_MASK;
+	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+	bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
+}
+
+void __iomem *pci_iospace_start;
+
+static int __init bcm63xx_pci_init(void)
+{
+	unsigned int mem_size;
+	u32 val;
+
+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+		return -ENODEV;
+
+	if (!bcm63xx_pci_enabled)
+		return -ENODEV;
+
+	/*
+	 * configuration  access are  done through  IO space,  remap 4
+	 * first bytes to access it from CPU.
+	 *
+	 * this means that  no io access from CPU  should happen while
+	 * we do a configuration cycle,  but there's no way we can add
+	 * a spinlock for each io access, so this is currently kind of
+	 * broken on SMP.
+	 */
+	pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4);
+	if (!pci_iospace_start)
+		return -ENOMEM;
+
+	/* setup local bus to PCI access (PCI memory) */
+	val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
+	bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
+	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
+
+	/* set Cardbus IDSEL (type 0 cfg access on primary bus for
+	 * this IDSEL will be done on Cardbus instead) */
+	val = bcm_pcmcia_readl(PCMCIA_C1_REG);
+	val &= ~PCMCIA_C1_CBIDSEL_MASK;
+	val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
+	bcm_pcmcia_writel(val, PCMCIA_C1_REG);
+
+#ifdef CONFIG_CARDBUS
+	/* setup local bus to PCI access (Cardbus memory) */
+	val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
+	bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
+	val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
+	bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
+#else
+	/* disable second access windows */
+	bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
+#endif
+
+	/* setup local bus  to PCI access (IO memory),  we have only 1
+	 * IO window  for both PCI  and cardbus, but it  cannot handle
+	 * both  at the  same time,  assume standard  PCI for  now, if
+	 * cardbus card has  IO zone, PCI fixup will  change window to
+	 * cardbus */
+	val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
+	bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
+	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
+
+	/* enable PCI related GPIO pins */
+	bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
+
+	/* setup PCI to local bus access, used by PCI device to target
+	 * local RAM while bus mastering */
+	bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
+	if (BCMCPU_IS_6358())
+		val = MPI_SP0_REMAP_ENABLE_MASK;
+	else
+		val = 0;
+	bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
+
+	bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
+	bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
+
+	mem_size = bcm63xx_get_memory_size();
+
+	/* 6348 before rev b0 exposes only 16 MB of RAM memory through
+	 * PCI, throw a warning if we have more memory */
+	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
+		if (mem_size > (16 * 1024 * 1024))
+			printk(KERN_WARNING "bcm63xx: this CPU "
+			       "revision cannot handle more than 16MB "
+			       "of RAM for PCI bus mastering\n");
+	} else {
+		/* setup sp0 range to local RAM size */
+		bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
+		bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
+	}
+
+	/* change  host bridge  retry  counter to  infinite number  of
+	 * retry,  needed for  some broadcom  wifi cards  with Silicon
+	 * Backplane bus where access to srom seems very slow  */
+	val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
+	val &= ~REG_TIMER_RETRY_MASK;
+	bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
+
+	/* enable memory decoder and bus mastering */
+	val = bcm63xx_int_cfg_readl(PCI_COMMAND);
+	val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	bcm63xx_int_cfg_writel(val, PCI_COMMAND);
+
+	/* enable read prefetching & disable byte swapping for bus
+	 * mastering transfers */
+	val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
+	val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
+	val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
+	val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
+	val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
+	bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
+
+	/* enable pci interrupt */
+	val = bcm_mpi_readl(MPI_LOCINT_REG);
+	val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
+	bcm_mpi_writel(val, MPI_LOCINT_REG);
+
+	register_pci_controller(&bcm63xx_controller);
+
+#ifdef CONFIG_CARDBUS
+	register_pci_controller(&bcm63xx_cb_controller);
+#endif
+
+	/* mark memory space used for IO mapping as reserved */
+	request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
+			   "bcm63xx PCI IO space");
+	return 0;
+}
+
+arch_initcall(bcm63xx_pci_init);
diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
new file mode 100644
index 000000000000..a6e594ef3d6a
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.h
@@ -0,0 +1,27 @@
+#ifndef PCI_BCM63XX_H_
+#define PCI_BCM63XX_H_
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_pci.h>
+
+/*
+ * Cardbus shares  the PCI bus, but has  no IDSEL, so a  special id is
+ * reserved for it.  If you have a standard PCI device at this id, you
+ * need to change the following definition.
+ */
+#define CARDBUS_PCI_IDSEL	0x8
+
+/*
+ * defined in ops-bcm63xx.c
+ */
+extern struct pci_ops bcm63xx_pci_ops;
+extern struct pci_ops bcm63xx_cb_ops;
+
+/*
+ * defined in pci-bcm63xx.c
+ */
+extern void __iomem *pci_iospace_start;
+
+#endif /* ! PCI_BCM63XX_H_ */
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index bf639590b8b2..ada24e6f951f 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -58,7 +58,7 @@ static void *cfg_space;
 #define LDT_BUS_ENABLED	2
 #define PCI_DEVICE_MODE	4
 
-static int sb1250_bus_status = 0;
+static int sb1250_bus_status;
 
 #define PCI_BRIDGE_DEVICE  0
 #define LDT_BRIDGE_DEVICE  1
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index b0eb9e75c682..9a11c2226891 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -31,8 +31,8 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
 
 static struct pci_controller *hose_head, **hose_tail = &hose_head;
 
-unsigned long PCIBIOS_MIN_IO	= 0x0000;
-unsigned long PCIBIOS_MIN_MEM	= 0;
+unsigned long PCIBIOS_MIN_IO;
+unsigned long PCIBIOS_MIN_MEM;
 
 static int pci_initialized;
 
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 2d3c0dca275d..3498ac9c35af 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -70,7 +70,7 @@ void __init bus_error_init(void)
 }
 
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, month, day, hour, min, sec;
 	unsigned long flags;
@@ -92,7 +92,8 @@ unsigned long read_persistent_clock(void)
 	m48t37_base->control = 0x00;
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	return mktime(year, month, day, hour, min, sec);
+	ts->tv_sec = mktime(year, month, day, hour, min, sec);
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long tim)
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index 4b8174b382d7..0cf86fb32ec3 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -8,6 +8,7 @@
  *         Wu Zhangjin <wuzj@lemote.com>
  */
 #include <asm/asm-offsets.h>
+#include <asm/page.h>
 #include <asm/regdef.h>
 #include <asm/asm.h>
 
@@ -34,7 +35,7 @@ LEAF(swsusp_arch_resume)
 0:
 	PTR_L t1, PBE_ADDRESS(t0)   /* source */
 	PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */
-	PTR_ADDIU t3, t1, _PAGE_SIZE
+	PTR_ADDIU t3, t1, PAGE_SIZE
 1:
 	REG_L t8, (t1)
 	REG_S t8, (t2)
diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index ef1564e40c8d..416b18f9fa72 100644
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -10,4 +10,4 @@ obj-$(CONFIG_SGI_IP22) += ip22-berr.o
 obj-$(CONFIG_SGI_IP28) += ip28-berr.o
 obj-$(CONFIG_EISA)	+= ip22-eisa.o
 
-# EXTRA_CFLAGS += -Werror
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 672e45d495a9..623ffc933c4c 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -87,19 +87,26 @@ enum swarm_rtc_type {
 
 enum swarm_rtc_type swarm_rtc_type;
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
+	unsigned long sec;
+
 	switch (swarm_rtc_type) {
 	case RTC_XICOR:
-		return xicor_get_time();
+		sec = xicor_get_time();
+		break;
 
 	case RTC_M4LT81:
-		return m41t81_get_time();
+		sec = m41t81_get_time();
+		break;
 
 	case RTC_NONE:
 	default:
-		return mktime(2000, 1, 1, 0, 0, 0);
+		sec = mktime(2000, 1, 1, 0, 0, 0);
+		break;
 	}
+	ts->tv_sec = sec;
+	tv->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long sec)
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 0d9ec1a5c24a..62df6a598e0a 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -182,7 +182,8 @@ void __init plat_time_init(void)
 	setup_pit_timer();
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	return -1;
+	ts->tv_sec = -1;
+	ts->tv_nsec = 0;
 }
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 7b637a7c0e66..707cfa9c547d 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -341,6 +341,15 @@ static void quirk_slc90e66_ide(struct pci_dev *dev)
 }
 #endif /* CONFIG_TOSHIBA_FPCIB0 */
 
+static void tc35815_fixup(struct pci_dev *dev)
+{
+	/* This device may have PM registers but not they are not suported. */
+	if (dev->pm_cap) {
+		dev_info(&dev->dev, "PM disabled\n");
+		dev->pm_cap = 0;
+	}
+}
+
 static void final_fixup(struct pci_dev *dev)
 {
 	unsigned char bist;
@@ -374,6 +383,10 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
 	quirk_slc90e66_ide);
 #endif
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
+			PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
+			PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup);
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
 DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
 
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index a205e2ba8e7b..c860810722c0 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -782,7 +782,7 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 		return;
 	iocled->mmioaddr = ioremap(baseaddr, 1);
 	if (!iocled->mmioaddr)
-		return;
+		goto out_free;
 	iocled->chip.get = txx9_iocled_get;
 	iocled->chip.set = txx9_iocled_set;
 	iocled->chip.direction_input = txx9_iocled_dir_in;
@@ -791,13 +791,13 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	iocled->chip.base = basenum;
 	iocled->chip.ngpio = num;
 	if (gpiochip_add(&iocled->chip))
-		return;
+		goto out_unmap;
 	if (basenum < 0)
 		basenum = iocled->chip.base;
 
 	pdev = platform_device_alloc("leds-gpio", basenum);
 	if (!pdev)
-		return;
+		goto out_gpio;
 	iocled->pdata.num_leds = num;
 	iocled->pdata.leds = iocled->leds;
 	for (i = 0; i < num; i++) {
@@ -812,7 +812,16 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	}
 	pdev->dev.platform_data = &iocled->pdata;
 	if (platform_device_add(pdev))
-		platform_device_put(pdev);
+		goto out_pdev;
+	return;
+out_pdev:
+	platform_device_put(pdev);
+out_gpio:
+	gpio_remove(&iocled->chip);
+out_unmap:
+	iounmap(iocled->mmioaddr);
+out_free:
+	kfree(iocled);
 }
 #else /* CONFIG_LEDS_GPIO */
 void __init txx9_iocled_init(unsigned long baseaddr,
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 054a16d68082..394edcbcce71 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -57,14 +57,13 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 	.cache_nice_tries	= 1,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
+	.newidle_idx		= 0,			\
+	.wake_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
 				| SD_BALANCE_NEWIDLE	\
-				| SD_WAKE_IDLE		\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index a180b4f9a4f6..465e498bcb33 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -774,11 +774,12 @@ int update_persistent_clock(struct timespec now)
 	return ppc_md.set_rtc_time(&tm);
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	struct rtc_time tm;
 	static int first = 1;
 
+	ts->tv_nsec = 0;
 	/* XXX this is a litle fragile but will work okay in the short term */
 	if (first) {
 		first = 0;
@@ -786,14 +787,18 @@ unsigned long read_persistent_clock(void)
 			timezone_offset = ppc_md.time_init();
 
 		/* get_boot_time() isn't guaranteed to be safe to call late */
-		if (ppc_md.get_boot_time)
-			return ppc_md.get_boot_time() -timezone_offset;
+		if (ppc_md.get_boot_time) {
+			ts->tv_sec = ppc_md.get_boot_time() - timezone_offset;
+			return;
+		}
+	}
+	if (!ppc_md.get_rtc_time) {
+		ts->tv_sec = 0;
+		return;
 	}
-	if (!ppc_md.get_rtc_time)
-		return 0;
 	ppc_md.get_rtc_time(&tm);
-	return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
-		      tm.tm_hour, tm.tm_min, tm.tm_sec);
+	ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+			    tm.tm_hour, tm.tm_min, tm.tm_sec);
 }
 
 /* clocksource code */
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index e3dc28b8075d..34162a0b2caa 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -184,12 +184,14 @@ static void timing_alert_interrupt(__u16 code)
 static void etr_reset(void);
 static void stp_reset(void);
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	struct timespec ts;
+	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, ts);
+}
 
-	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
-	return ts.tv_sec;
+void read_boot_clock(struct timespec *ts)
+{
+	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, ts);
 }
 
 static cycle_t read_tod_clock(struct clocksource *cs)
@@ -207,6 +209,10 @@ static struct clocksource clocksource_tod = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+struct clocksource * __init clocksource_default_clock(void)
+{
+	return &clocksource_tod;
+}
 
 void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
 {
@@ -244,10 +250,6 @@ void update_vsyscall_tz(void)
  */
 void __init time_init(void)
 {
-	struct timespec ts;
-	unsigned long flags;
-	cycle_t now;
-
 	/* Reset time synchronization interfaces. */
 	etr_reset();
 	stp_reset();
@@ -263,26 +265,6 @@ void __init time_init(void)
 	if (clocksource_register(&clocksource_tod) != 0)
 		panic("Could not register TOD clock source");
 
-	/*
-	 * The TOD clock is an accurate clock. The xtime should be
-	 * initialized in a way that the difference between TOD and
-	 * xtime is reasonably small. Too bad that timekeeping_init
-	 * sets xtime.tv_nsec to zero. In addition the clock source
-	 * change from the jiffies clock source to the TOD clock
-	 * source add another error of up to 1/HZ second. The same
-	 * function sets wall_to_monotonic to a value that is too
-	 * small for /proc/uptime to be accurate.
-	 * Reset xtime and wall_to_monotonic to sane values.
-	 */
-	write_seqlock_irqsave(&xtime_lock, flags);
-	now = get_clock();
-	tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
-	clocksource_tod.cycle_last = now;
-	clocksource_tod.raw_time = xtime;
-	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
-	set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-
 	/* Enable TOD clock interrupts on the boot cpu. */
 	init_cpu_timer();
 
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
new file mode 100644
index 000000000000..55d413e6dcf2
--- /dev/null
+++ b/arch/score/Kconfig
@@ -0,0 +1,141 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+mainmenu "Linux/SCORE Kernel Configuration"
+
+menu "Machine selection"
+
+choice
+	prompt "System type"
+	default MACH_SPCT6600
+
+config ARCH_SCORE7
+	bool "SCORE7 processor"
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select CPU_SCORE7
+	select GENERIC_HAS_IOMAP
+
+config MACH_SPCT6600
+	bool "SPCT6600 series based machines"
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select CPU_SCORE7
+	select GENERIC_HAS_IOMAP
+
+config SCORE_SIM
+	bool "Score simulator"
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select CPU_SCORE7
+	select GENERIC_HAS_IOMAP
+endchoice
+
+endmenu
+
+config CPU_SCORE7
+	bool
+
+config GENERIC_IOMAP
+	def_bool y
+
+config NO_DMA
+	bool
+	default y
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
+config GENERIC_TIME
+	def_bool y
+
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+	def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
+config GENERIC_SYSCALL_TABLE
+	def_bool y
+
+config SCORE_L1_CACHE_SHIFT
+	int
+	default "4"
+
+menu "Kernel type"
+
+config 32BIT
+	def_bool y
+
+config GENERIC_HARDIRQS
+	def_bool y
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config ARCH_POPULATES_NODE_MAP
+	def_bool y
+
+source "mm/Kconfig"
+
+config MEMORY_START
+	hex
+	default	0xa0000000
+
+source "kernel/time/Kconfig"
+source "kernel/Kconfig.hz"
+source "kernel/Kconfig.preempt"
+
+endmenu
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+source "init/Kconfig"
+
+config PROBE_INITRD_HEADER
+	bool "Probe initrd header created by addinitrd"
+	depends on BLK_DEV_INITRD
+	help
+	  Probe initrd header at the last page of kernel image.
+	  Say Y here if you are using arch/score/boot/addinitrd.c to
+	  add initrd or initramfs image to the kernel image.
+	  Otherwise, say N.
+
+config MMU
+	def_bool y
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/score/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/score/Kconfig.debug b/arch/score/Kconfig.debug
new file mode 100644
index 000000000000..451ed54ce646
--- /dev/null
+++ b/arch/score/Kconfig.debug
@@ -0,0 +1,37 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
+source "lib/Kconfig.debug"
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  On some platforms, there is currently no way for the boot loader to
+	  pass arguments to the kernel. For these platforms, you can supply
+	  some command-line options at build time by entering them here.  In
+	  other cases you can specify kernel args so that you don't have
+	  to set them up in board prom initialization routines.
+
+config DEBUG_STACK_USAGE
+	bool "Enable stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config RUNTIME_DEBUG
+	bool "Enable run-time debugging"
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here, some debugging macros will do run-time checking.
+	  If you say N here, those macros will mostly turn to no-ops.  See
+	  include/asm-score/debug.h for debuging macros.
+	  If unsure, say N.
+
+endmenu
diff --git a/arch/score/Makefile b/arch/score/Makefile
new file mode 100644
index 000000000000..68e0cd06d5c9
--- /dev/null
+++ b/arch/score/Makefile
@@ -0,0 +1,43 @@
+#
+# arch/score/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+KBUILD_DEFCONFIG := spct6600_defconfig
+CROSS_COMPILE := score-linux-
+
+#
+# CPU-dependent compiler/assembler options for optimization.
+#
+cflags-y += -G0 -pipe -mel -mnhwloop -D__SCOREEL__ \
+	-D__linux__ -ffunction-sections -ffreestanding
+
+#
+# Board-dependent options and extra files
+#
+KBUILD_AFLAGS += $(cflags-y)
+KBUILD_CFLAGS += $(cflags-y)
+MODFLAGS += -mlong-calls
+LDFLAGS += --oformat elf32-littlescore
+LDFLAGS_vmlinux	+= -G0 -static -nostdlib
+
+head-y := arch/score/kernel/head.o
+libs-y += arch/score/lib/
+core-y += arch/score/kernel/ arch/score/mm/
+
+boot := arch/score/boot
+
+vmlinux.bin: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+archclean:
+	@$(MAKE) $(clean)=$(boot)
+
+define archhelp
+	echo '  vmlinux.bin          - Raw binary boot image'
+	echo
+	echo '  These will be default as apropriate for a configured platform.'
+endef
diff --git a/arch/score/boot/Makefile b/arch/score/boot/Makefile
new file mode 100644
index 000000000000..0c5fbd0fb696
--- /dev/null
+++ b/arch/score/boot/Makefile
@@ -0,0 +1,15 @@
+#
+# arch/score/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+targets	:= vmlinux.bin
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+clean-files += vmlinux.bin
diff --git a/arch/score/configs/spct6600_defconfig b/arch/score/configs/spct6600_defconfig
new file mode 100644
index 000000000000..e064943b13d4
--- /dev/null
+++ b/arch/score/configs/spct6600_defconfig
@@ -0,0 +1,717 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Fri Jun 12 18:57:07 2009
+#
+
+#
+# Machine selection
+#
+# CONFIG_ARCH_SCORE7 is not set
+CONFIG_MACH_SPCT6600=y
+# CONFIG_SCORE_SIM is not set
+CONFIG_CPU_SCORE7=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_SYSCALL_TABLE=y
+CONFIG_SCORE_L1_CACHE_SHIFT=4
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_MEMORY_START=0xa0000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=12
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_MMU=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_NLATTR=y
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
new file mode 100644
index 000000000000..b367abd4620f
--- /dev/null
+++ b/arch/score/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y +=
diff --git a/arch/score/include/asm/asmmacro.h b/arch/score/include/asm/asmmacro.h
new file mode 100644
index 000000000000..a04a54cea25d
--- /dev/null
+++ b/arch/score/include/asm/asmmacro.h
@@ -0,0 +1,161 @@
+#ifndef _ASM_SCORE_ASMMACRO_H
+#define _ASM_SCORE_ASMMACRO_H
+
+#include <asm/asm-offsets.h>
+
+#ifdef __ASSEMBLY__
+
+.macro	SAVE_ALL
+	mfcr	r30, cr0
+	mv	r31, r0
+	nop
+	/* if UMs == 1, change stack. */
+	slli.c	r30, r30, 28
+	bpl	1f
+	la	r31, kernelsp
+	lw	r31, [r31]
+1:
+	mv	r30, r0
+	addri	r0, r31, -PT_SIZE
+
+	sw	r30, [r0, PT_R0]
+	.set	r1
+	sw	r1, [r0, PT_R1]
+	.set	nor1
+	sw	r2, [r0, PT_R2]
+	sw	r3, [r0, PT_R3]
+	sw	r4, [r0, PT_R4]
+	sw	r5, [r0, PT_R5]
+	sw	r6, [r0, PT_R6]
+	sw	r7, [r0, PT_R7]
+
+	sw	r8, [r0, PT_R8]
+	sw	r9, [r0, PT_R9]
+	sw	r10, [r0, PT_R10]
+	sw	r11, [r0, PT_R11]
+	sw	r12, [r0, PT_R12]
+	sw	r13, [r0, PT_R13]
+	sw	r14, [r0, PT_R14]
+	sw	r15, [r0, PT_R15]
+
+	sw	r16, [r0, PT_R16]
+	sw	r17, [r0, PT_R17]
+	sw	r18, [r0, PT_R18]
+	sw	r19, [r0, PT_R19]
+	sw	r20, [r0, PT_R20]
+	sw	r21, [r0, PT_R21]
+	sw	r22, [r0, PT_R22]
+	sw	r23, [r0, PT_R23]
+
+	sw	r24, [r0, PT_R24]
+	sw	r25, [r0, PT_R25]
+	sw	r25, [r0, PT_R25]
+	sw	r26, [r0, PT_R26]
+	sw	r27, [r0, PT_R27]
+
+	sw	r28, [r0, PT_R28]
+	sw	r29, [r0, PT_R29]
+	orri	r28, r0, 0x1fff
+	li	r31, 0x00001fff
+	xor	r28, r28, r31
+
+	mfcehl	r30, r31
+	sw	r30, [r0, PT_CEH]
+	sw	r31, [r0, PT_CEL]
+
+	mfcr	r31, cr0
+	sw	r31, [r0, PT_PSR]
+
+	mfcr	r31, cr1
+	sw	r31, [r0, PT_CONDITION]
+
+	mfcr	r31, cr2
+	sw	r31, [r0, PT_ECR]
+	
+	mfcr	r31, cr5
+	srli	r31, r31, 1
+	slli	r31, r31, 1
+	sw	r31, [r0, PT_EPC]
+.endm
+
+.macro	RESTORE_ALL_AND_RET
+	mfcr	r30, cr0
+	srli	r30, r30, 1
+	slli	r30, r30, 1
+	mtcr	r30, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	.set	r1
+	ldis	r1, 0x00ff
+	and	r30, r30, r1
+	not	r1, r1
+	lw	r31, [r0, PT_PSR]
+	and	r31, r31, r1
+	.set	nor1
+	or	r31, r31, r30
+	mtcr	r31, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	lw	r30, [r0, PT_CONDITION]
+	mtcr	r30, cr1
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	lw	r30, [r0, PT_CEH]
+	lw	r31, [r0, PT_CEL]
+	mtcehl	r30, r31
+
+	.set	r1
+	lw	r1, [r0, PT_R1]
+	.set	nor1
+	lw	r2, [r0, PT_R2]
+	lw	r3, [r0, PT_R3]
+	lw	r4, [r0, PT_R4]
+	lw	r5, [r0, PT_R5]
+	lw	r6, [r0, PT_R6]
+	lw	r7, [r0, PT_R7]
+
+	lw	r8, [r0, PT_R8]
+	lw	r9, [r0, PT_R9]
+	lw	r10, [r0, PT_R10]
+	lw	r11, [r0, PT_R11]
+	lw	r12, [r0, PT_R12]
+	lw	r13, [r0, PT_R13]
+	lw	r14, [r0, PT_R14]
+	lw	r15, [r0, PT_R15]
+
+	lw	r16, [r0, PT_R16]
+	lw	r17, [r0, PT_R17]
+	lw	r18, [r0, PT_R18]
+	lw	r19, [r0, PT_R19]
+	lw	r20, [r0, PT_R20]
+	lw	r21, [r0, PT_R21]
+	lw	r22, [r0, PT_R22]
+	lw	r23, [r0, PT_R23]
+
+	lw	r24, [r0, PT_R24]
+	lw	r25, [r0, PT_R25]
+	lw	r26, [r0, PT_R26]
+	lw	r27, [r0, PT_R27]
+	lw	r28, [r0, PT_R28]
+	lw	r29, [r0, PT_R29]
+
+	lw	r30, [r0, PT_EPC]
+	lw	r0, [r0, PT_R0]
+	mtcr	r30, cr5
+	rte
+.endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_SCORE_ASMMACRO_H */
diff --git a/arch/score/include/asm/atomic.h b/arch/score/include/asm/atomic.h
new file mode 100644
index 000000000000..84eb8ddf9f3f
--- /dev/null
+++ b/arch/score/include/asm/atomic.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_ATOMIC_H
+#define _ASM_SCORE_ATOMIC_H
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_SCORE_ATOMIC_H */
diff --git a/arch/score/include/asm/auxvec.h b/arch/score/include/asm/auxvec.h
new file mode 100644
index 000000000000..f69151565aee
--- /dev/null
+++ b/arch/score/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_AUXVEC_H
+#define _ASM_SCORE_AUXVEC_H
+
+#endif /* _ASM_SCORE_AUXVEC_H */
diff --git a/arch/score/include/asm/bitops.h b/arch/score/include/asm/bitops.h
new file mode 100644
index 000000000000..2763b050fca8
--- /dev/null
+++ b/arch/score/include/asm/bitops.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_SCORE_BITOPS_H
+#define _ASM_SCORE_BITOPS_H
+
+#include <asm/byteorder.h> /* swab32 */
+#include <asm/system.h> /* save_flags */
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+#include <asm-generic/bitops.h>
+#include <asm-generic/bitops/__fls.h>
+
+#endif /* _ASM_SCORE_BITOPS_H */
diff --git a/arch/score/include/asm/bitsperlong.h b/arch/score/include/asm/bitsperlong.h
new file mode 100644
index 000000000000..86ff337aa459
--- /dev/null
+++ b/arch/score/include/asm/bitsperlong.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BITSPERLONG_H
+#define _ASM_SCORE_BITSPERLONG_H
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* _ASM_SCORE_BITSPERLONG_H */
diff --git a/arch/score/include/asm/bug.h b/arch/score/include/asm/bug.h
new file mode 100644
index 000000000000..bb76a330bcf1
--- /dev/null
+++ b/arch/score/include/asm/bug.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BUG_H
+#define _ASM_SCORE_BUG_H
+
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_SCORE_BUG_H */
diff --git a/arch/score/include/asm/bugs.h b/arch/score/include/asm/bugs.h
new file mode 100644
index 000000000000..a062e1056bb3
--- /dev/null
+++ b/arch/score/include/asm/bugs.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BUGS_H
+#define _ASM_SCORE_BUGS_H
+
+#include <asm-generic/bugs.h>
+
+#endif /* _ASM_SCORE_BUGS_H */
diff --git a/arch/score/include/asm/byteorder.h b/arch/score/include/asm/byteorder.h
new file mode 100644
index 000000000000..88cbebc79212
--- /dev/null
+++ b/arch/score/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BYTEORDER_H
+#define _ASM_SCORE_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_SCORE_BYTEORDER_H */
diff --git a/arch/score/include/asm/cache.h b/arch/score/include/asm/cache.h
new file mode 100644
index 000000000000..ae3d59f2d2c4
--- /dev/null
+++ b/arch/score/include/asm/cache.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SCORE_CACHE_H
+#define _ASM_SCORE_CACHE_H
+
+#define L1_CACHE_SHIFT		4
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif /* _ASM_SCORE_CACHE_H */
diff --git a/arch/score/include/asm/cacheflush.h b/arch/score/include/asm/cacheflush.h
new file mode 100644
index 000000000000..07cc8fc457cd
--- /dev/null
+++ b/arch/score/include/asm/cacheflush.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_SCORE_CACHEFLUSH_H
+#define _ASM_SCORE_CACHEFLUSH_H
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma,
+				unsigned long start, unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma,
+				unsigned long page, unsigned long pfn);
+extern void flush_cache_sigtramp(unsigned long addr);
+extern void flush_icache_all(void);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_dcache_range(unsigned long start, unsigned long end);
+
+#define flush_cache_dup_mm(mm)			do {} while (0)
+#define flush_dcache_page(page)			do {} while (0)
+#define flush_dcache_mmap_lock(mapping)		do {} while (0)
+#define flush_dcache_mmap_unlock(mapping)	do {} while (0)
+#define flush_cache_vmap(start, end)		do {} while (0)
+#define flush_cache_vunmap(start, end)		do {} while (0)
+
+static inline void flush_icache_page(struct vm_area_struct *vma,
+	struct page *page)
+{
+	if (vma->vm_flags & VM_EXEC) {
+		void *v = page_address(page);
+		flush_icache_range((unsigned long) v,
+				(unsigned long) v + PAGE_SIZE);
+	}
+}
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		memcpy(dst, src, len);				\
+		if ((vma->vm_flags & VM_EXEC))			\
+			flush_cache_page(vma, vaddr, page_to_pfn(page));\
+	} while (0)
+
+#endif /* _ASM_SCORE_CACHEFLUSH_H */
diff --git a/arch/score/include/asm/checksum.h b/arch/score/include/asm/checksum.h
new file mode 100644
index 000000000000..f909ac3144a4
--- /dev/null
+++ b/arch/score/include/asm/checksum.h
@@ -0,0 +1,235 @@
+#ifndef _ASM_SCORE_CHECKSUM_H
+#define _ASM_SCORE_CHECKSUM_H
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const void *buff, int len, __wsum sum);
+unsigned int csum_partial_copy_from_user(const char *src, char *dst, int len,
+					unsigned int sum, int *csum_err);
+unsigned int csum_partial_copy(const char *src, char *dst,
+					int len, unsigned int sum);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline
+__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
+			__wsum sum, int *err_ptr)
+{
+	sum = csum_partial(src, len, sum);
+	if (copy_to_user(dst, src, len)) {
+		*err_ptr = -EFAULT;
+		return (__force __wsum) -1; /* invalid checksum */
+	}
+	return sum;
+}
+
+
+#define csum_partial_copy_nocheck csum_partial_copy
+/*
+ *	Fold a partial checksum without adding pseudo headers
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	/* the while loop is unnecessary really, it's always enough with two
+	   iterations */
+	__asm__ __volatile__(
+		".set volatile\n\t"
+		".set\tr1\n\t"
+		"slli\tr1,%0, 16\n\t"
+		"add\t%0,%0, r1\n\t"
+		"cmp.c\tr1, %0\n\t"
+		"srli\t%0, %0, 16\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:ldi\tr30, 0xffff\n\t"
+		"xor\t%0, %0, r30\n\t"
+		"slli\t%0, %0, 16\n\t"
+		"srli\t%0, %0, 16\n\t"
+		".set\tnor1\n\t"
+		".set optimize\n\t"
+		: "=r" (sum)
+		: "0" (sum));
+	return sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum;
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+		".set volatile\n\t"
+		".set\tnor1\n\t"
+		"lw\t%0, [%1]\n\t"
+		"subri\t%2, %2, 4\n\t"
+		"slli\t%2, %2, 2\n\t"
+		"lw\t%3, [%1, 4]\n\t"
+		"add\t%2, %2, %1\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"lw\t%3, [%1, 8]\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"lw\t%3, [%1, 12]\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n"
+
+		"1:\tlw\t%3, [%1, 16]\n\t"
+		"addi\t%1, 4\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"bleu\t2f\n\t"
+		"addi\t%0, 0x1\n"
+		"2:cmp.c\t%2, %1\n\t"
+		"bne\t1b\n\t"
+
+		".set\tr1\n\t"
+		".set optimize\n\t"
+		: "=&r" (sum), "=&r" (iph), "=&r" (ihl), "=&r" (dummy)
+		: "1" (iph), "2" (ihl));
+
+	return csum_fold(sum);
+}
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		unsigned short proto, __wsum sum)
+{
+	unsigned long tmp = (ntohs(len) << 16) + proto * 256;
+	__asm__ __volatile__(
+		".set volatile\n\t"
+		"add\t%0, %0, %2\n\t"
+		"cmp.c\t%2, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		"add\t%0, %0, %4\n\t"
+		"cmp.c\t%4, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		".set optimize\n\t"
+		: "=r" (sum)
+		: "0" (daddr), "r"(saddr),
+		"r" (tmp),
+		"r" (sum));
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline unsigned short ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				const struct in6_addr *daddr,
+				__u32 len, unsigned short proto,
+				__wsum sum)
+{
+	__asm__ __volatile__(
+		".set\tnoreorder\t\t\t# csum_ipv6_magic\n\t"
+		".set\tnoat\n\t"
+		"addu\t%0, %5\t\t\t# proto (long in network byte order)\n\t"
+		"sltu\t$1, %0, %5\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %6\t\t\t# csum\n\t"
+		"sltu\t$1, %0, %6\n\t"
+		"lw\t%1, 0(%2)\t\t\t# four words source address\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 4(%2)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 8(%2)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 12(%2)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 0(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 4(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 8(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 12(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"addu\t%0, $1\t\t\t# Add final carry\n\t"
+		".set\tnoat\n\t"
+		".set\tnoreorder"
+		: "=r" (sum), "=r" (proto)
+		: "r" (saddr), "r" (daddr),
+		  "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+
+	return csum_fold(sum);
+}
+#endif /* _ASM_SCORE_CHECKSUM_H */
diff --git a/arch/score/include/asm/cputime.h b/arch/score/include/asm/cputime.h
new file mode 100644
index 000000000000..1fced99f0d67
--- /dev/null
+++ b/arch/score/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_CPUTIME_H
+#define _ASM_SCORE_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_SCORE_CPUTIME_H */
diff --git a/arch/score/include/asm/current.h b/arch/score/include/asm/current.h
new file mode 100644
index 000000000000..16eae9cbaf1a
--- /dev/null
+++ b/arch/score/include/asm/current.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_CURRENT_H
+#define _ASM_SCORE_CURRENT_H
+
+#include <asm-generic/current.h>
+
+#endif /* _ASM_SCORE_CURRENT_H */
diff --git a/arch/score/include/asm/delay.h b/arch/score/include/asm/delay.h
new file mode 100644
index 000000000000..6726ec199dc0
--- /dev/null
+++ b/arch/score/include/asm/delay.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_SCORE_DELAY_H
+#define _ASM_SCORE_DELAY_H
+
+static inline void __delay(unsigned long loops)
+{
+	/* 3 cycles per loop. */
+	__asm__ __volatile__ (
+		"1:\tsubi\t%0, 3\n\t"
+		"cmpz.c\t%0\n\t"
+		"ble\t1b\n\t"
+		: "=r" (loops)
+		: "0" (loops));
+}
+
+static inline void __udelay(unsigned long usecs)
+{
+	unsigned long loops_per_usec;
+
+	loops_per_usec = (loops_per_jiffy * HZ) / 1000000;
+
+	__delay(usecs * loops_per_usec);
+}
+
+#define udelay(usecs) __udelay(usecs)
+
+#endif /* _ASM_SCORE_DELAY_H */
diff --git a/arch/score/include/asm/device.h b/arch/score/include/asm/device.h
new file mode 100644
index 000000000000..2dc7cc5d5ef9
--- /dev/null
+++ b/arch/score/include/asm/device.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_DEVICE_H
+#define _ASM_SCORE_DEVICE_H
+
+#include <asm-generic/device.h>
+
+#endif /* _ASM_SCORE_DEVICE_H */
diff --git a/arch/score/include/asm/div64.h b/arch/score/include/asm/div64.h
new file mode 100644
index 000000000000..75fae19824eb
--- /dev/null
+++ b/arch/score/include/asm/div64.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_DIV64_H
+#define _ASM_SCORE_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* _ASM_SCORE_DIV64_H */
diff --git a/arch/score/include/asm/dma-mapping.h b/arch/score/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..f9c0193c7a53
--- /dev/null
+++ b/arch/score/include/asm/dma-mapping.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_DMA_MAPPING_H
+#define _ASM_SCORE_DMA_MAPPING_H
+
+#include <asm-generic/dma-mapping-broken.h>
+
+#endif /* _ASM_SCORE_DMA_MAPPING_H */
diff --git a/arch/score/include/asm/dma.h b/arch/score/include/asm/dma.h
new file mode 100644
index 000000000000..9f44185298bf
--- /dev/null
+++ b/arch/score/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SCORE_DMA_H
+#define _ASM_SCORE_DMA_H
+
+#include <asm/io.h>
+
+#define MAX_DMA_ADDRESS		(0)
+
+#endif /* _ASM_SCORE_DMA_H */
diff --git a/arch/score/include/asm/elf.h b/arch/score/include/asm/elf.h
new file mode 100644
index 000000000000..43526d9fda93
--- /dev/null
+++ b/arch/score/include/asm/elf.h
@@ -0,0 +1,103 @@
+#ifndef _ASM_SCORE_ELF_H
+#define _ASM_SCORE_ELF_H
+
+#include <linux/ptrace.h>
+
+#define EM_SCORE7	135
+
+/* Relocation types. */
+#define R_SCORE_NONE		0
+#define R_SCORE_HI16		1
+#define R_SCORE_LO16		2
+#define R_SCORE_BCMP		3
+#define R_SCORE_24		4
+#define R_SCORE_PC19		5
+#define R_SCORE16_11		6
+#define R_SCORE16_PC8		7
+#define R_SCORE_ABS32		8
+#define R_SCORE_ABS16		9
+#define R_SCORE_DUMMY2		10
+#define R_SCORE_GP15		11
+#define R_SCORE_GNU_VTINHERIT	12
+#define R_SCORE_GNU_VTENTRY	13
+#define R_SCORE_GOT15		14
+#define R_SCORE_GOT_LO16	15
+#define R_SCORE_CALL15		16
+#define R_SCORE_GPREL32		17
+#define R_SCORE_REL32		18
+#define R_SCORE_DUMMY_HI16	19
+#define R_SCORE_IMM30		20
+#define R_SCORE_IMM32		21
+
+/* ELF register definitions */
+typedef unsigned long	elf_greg_t;
+
+#define ELF_NGREG	(sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t	elf_gregset_t[ELF_NGREG];
+
+/* Score does not have fp regs. */
+typedef double		elf_fpreg_t;
+typedef elf_fpreg_t	elf_fpregset_t;
+
+#define elf_check_arch(x)	((x)->e_machine == EM_SCORE7)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_SCORE7
+
+#define SET_PERSONALITY(ex)					\
+do {								\
+	set_personality(PER_LINUX);				\
+} while (0)
+
+struct task_struct;
+struct pt_regs;
+
+#define CORE_DUMP_USE_REGSET
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(NULL)
+
+#define ELF_PLAT_INIT(_r, load_addr)					\
+do {									\
+	_r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0;	\
+	_r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0;	\
+	_r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0;	\
+	_r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0;	\
+	_r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0;	\
+	_r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0;	\
+	_r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0;	\
+	_r->regs[30] = _r->regs[31] = 0;				\
+} while (0)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
+#endif
+
+#endif /* _ASM_SCORE_ELF_H */
diff --git a/arch/score/include/asm/emergency-restart.h b/arch/score/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..ca31e9803a8a
--- /dev/null
+++ b/arch/score/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_EMERGENCY_RESTART_H
+#define _ASM_SCORE_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_SCORE_EMERGENCY_RESTART_H */
diff --git a/arch/score/include/asm/errno.h b/arch/score/include/asm/errno.h
new file mode 100644
index 000000000000..29ff39d5ab47
--- /dev/null
+++ b/arch/score/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_ERRNO_H
+#define _ASM_SCORE_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_SCORE_ERRNO_H */
diff --git a/arch/score/include/asm/fcntl.h b/arch/score/include/asm/fcntl.h
new file mode 100644
index 000000000000..03968a3103a4
--- /dev/null
+++ b/arch/score/include/asm/fcntl.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_FCNTL_H
+#define _ASM_SCORE_FCNTL_H
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_SCORE_FCNTL_H */
diff --git a/arch/score/include/asm/fixmap.h b/arch/score/include/asm/fixmap.h
new file mode 100644
index 000000000000..ee1676694024
--- /dev/null
+++ b/arch/score/include/asm/fixmap.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_SCORE_FIXMAP_H
+#define _ASM_SCORE_FIXMAP_H
+
+#include <asm/page.h>
+
+#define PHY_RAM_BASE		0x00000000
+#define PHY_IO_BASE		0x10000000
+
+#define VIRTUAL_RAM_BASE	0xa0000000
+#define VIRTUAL_IO_BASE		0xb0000000
+
+#define RAM_SPACE_SIZE		0x10000000
+#define IO_SPACE_SIZE		0x10000000
+
+/* Kernel unmapped, cached 512MB */
+#define KSEG1			0xa0000000
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#define FIX_N_COLOURS 8
+	FIX_CMAP_BEGIN,
+	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+	__end_of_fixed_addresses
+};
+
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#define FIXADDR_TOP	((unsigned long)(long)(int)0xfefe0000)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	\
+	((FIXADDR_TOP - ((x) & PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	return __virt_to_fix(vaddr);
+}
+
+#endif /* _ASM_SCORE_FIXMAP_H */
diff --git a/arch/score/include/asm/ftrace.h b/arch/score/include/asm/ftrace.h
new file mode 100644
index 000000000000..79d6f10e1f5b
--- /dev/null
+++ b/arch/score/include/asm/ftrace.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_FTRACE_H
+#define _ASM_SCORE_FTRACE_H
+
+#endif /* _ASM_SCORE_FTRACE_H */
diff --git a/arch/score/include/asm/futex.h b/arch/score/include/asm/futex.h
new file mode 100644
index 000000000000..1dca2420f8db
--- /dev/null
+++ b/arch/score/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_FUTEX_H
+#define _ASM_SCORE_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif /* _ASM_SCORE_FUTEX_H */
diff --git a/arch/score/include/asm/hardirq.h b/arch/score/include/asm/hardirq.h
new file mode 100644
index 000000000000..dc932c50d3ee
--- /dev/null
+++ b/arch/score/include/asm/hardirq.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_HARDIRQ_H
+#define _ASM_SCORE_HARDIRQ_H
+
+#include <asm-generic/hardirq.h>
+
+#endif /* _ASM_SCORE_HARDIRQ_H */
diff --git a/arch/score/include/asm/hw_irq.h b/arch/score/include/asm/hw_irq.h
new file mode 100644
index 000000000000..4caafb2b509a
--- /dev/null
+++ b/arch/score/include/asm/hw_irq.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_HW_IRQ_H
+#define _ASM_SCORE_HW_IRQ_H
+
+#endif /* _ASM_SCORE_HW_IRQ_H */
diff --git a/arch/score/include/asm/io.h b/arch/score/include/asm/io.h
new file mode 100644
index 000000000000..fbbfd7132e3b
--- /dev/null
+++ b/arch/score/include/asm/io.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_SCORE_IO_H
+#define _ASM_SCORE_IO_H
+
+#include <asm-generic/io.h>
+
+#define virt_to_bus	virt_to_phys
+#define bus_to_virt	phys_to_virt
+
+#endif /* _ASM_SCORE_IO_H */
diff --git a/arch/score/include/asm/ioctl.h b/arch/score/include/asm/ioctl.h
new file mode 100644
index 000000000000..a351d2194bfd
--- /dev/null
+++ b/arch/score/include/asm/ioctl.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_IOCTL_H
+#define _ASM_SCORE_IOCTL_H
+
+#include <asm-generic/ioctl.h>
+
+#endif /* _ASM_SCORE_IOCTL_H */
diff --git a/arch/score/include/asm/ioctls.h b/arch/score/include/asm/ioctls.h
new file mode 100644
index 000000000000..ed01d2b9aeab
--- /dev/null
+++ b/arch/score/include/asm/ioctls.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_IOCTLS_H
+#define _ASM_SCORE_IOCTLS_H
+
+#include <asm-generic/ioctls.h>
+
+#endif /* _ASM_SCORE_IOCTLS_H */
diff --git a/arch/score/include/asm/ipcbuf.h b/arch/score/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..e082ceff1818
--- /dev/null
+++ b/arch/score/include/asm/ipcbuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_IPCBUF_H
+#define _ASM_SCORE_IPCBUF_H
+
+#include <asm-generic/ipcbuf.h>
+
+#endif /* _ASM_SCORE_IPCBUF_H */
diff --git a/arch/score/include/asm/irq.h b/arch/score/include/asm/irq.h
new file mode 100644
index 000000000000..c883f3df33fa
--- /dev/null
+++ b/arch/score/include/asm/irq.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SCORE_IRQ_H
+#define _ASM_SCORE_IRQ_H
+
+#define EXCEPTION_VECTOR_BASE_ADDR	0xa0000000
+#define VECTOR_ADDRESS_OFFSET_MODE4	0
+#define VECTOR_ADDRESS_OFFSET_MODE16	1
+
+#define DEBUG_VECTOR_SIZE		(0x4)
+#define DEBUG_VECTOR_BASE_ADDR		((EXCEPTION_VECTOR_BASE_ADDR) + 0x1fc)
+
+#define GENERAL_VECTOR_SIZE		(0x10)
+#define GENERAL_VECTOR_BASE_ADDR	((EXCEPTION_VECTOR_BASE_ADDR) + 0x200)
+
+#define NR_IRQS				64
+#define IRQ_VECTOR_SIZE			(0x10)
+#define IRQ_VECTOR_BASE_ADDR		((EXCEPTION_VECTOR_BASE_ADDR) + 0x210)
+#define IRQ_VECTOR_END_ADDR		((EXCEPTION_VECTOR_BASE_ADDR) + 0x5f0)
+
+#define irq_canonicalize(irq)	(irq)
+
+#define IRQ_TIMER (7)		/* Timer IRQ number of SPCT6600 */
+
+extern void interrupt_exception_vector(void);
+
+#endif /* _ASM_SCORE_IRQ_H */
diff --git a/arch/score/include/asm/irq_regs.h b/arch/score/include/asm/irq_regs.h
new file mode 100644
index 000000000000..b8e881c9a69f
--- /dev/null
+++ b/arch/score/include/asm/irq_regs.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SCORE_IRQ_REGS_H
+#define _ASM_SCORE_IRQ_REGS_H
+
+#include <linux/thread_info.h>
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return current_thread_info()->regs;
+}
+
+#endif /* _ASM_SCORE_IRQ_REGS_H */
diff --git a/arch/score/include/asm/irqflags.h b/arch/score/include/asm/irqflags.h
new file mode 100644
index 000000000000..690a6cae7294
--- /dev/null
+++ b/arch/score/include/asm/irqflags.h
@@ -0,0 +1,109 @@
+#ifndef _ASM_SCORE_IRQFLAGS_H
+#define _ASM_SCORE_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#define raw_local_irq_save(x)			\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr	r8, cr0;"		\
+		"li	r9, 0xfffffffe;"	\
+		"nop;"				\
+		"mv	%0, r8;"		\
+		"and	r8, r8, r9;"		\
+		"mtcr	r8, cr0;"		\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		: "=r" (x)			\
+		:				\
+		: "r8", "r9"			\
+		);				\
+}
+
+#define raw_local_irq_restore(x)		\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr	r8, cr0;"		\
+		"ldi	r9, 0x1;"		\
+		"and	%0, %0, r9;"		\
+		"or	r8, r8, %0;"		\
+		"mtcr	r8, cr0;"		\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		:				\
+		: "r"(x)			\
+		: "r8", "r9"			\
+		);				\
+}
+
+#define raw_local_irq_enable(void)		\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"ori\tr8,0x1;"			\
+		"mtcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		:				\
+		:				\
+		: "r8");			\
+}
+
+#define raw_local_irq_disable(void)		\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"srli\tr8,r8,1;"		\
+		"slli\tr8,r8,1;"		\
+		"mtcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		:				\
+		:				\
+		: "r8");			\
+}
+
+#define raw_local_save_flags(x)			\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr	r8, cr0;"		\
+		"nop;"				\
+		"nop;"				\
+		"mv	%0, r8;"		\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"ldi	r9, 0x1;"		\
+		"and	%0, %0, r9;"		\
+		: "=r" (x)			\
+		:				\
+		: "r8", "r9"			\
+		);				\
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & 1);
+}
+
+#endif
+
+#endif /* _ASM_SCORE_IRQFLAGS_H */
diff --git a/arch/score/include/asm/kdebug.h b/arch/score/include/asm/kdebug.h
new file mode 100644
index 000000000000..a666e513f747
--- /dev/null
+++ b/arch/score/include/asm/kdebug.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_KDEBUG_H
+#define _ASM_SCORE_KDEBUG_H
+
+#include <asm-generic/kdebug.h>
+
+#endif /* _ASM_SCORE_KDEBUG_H */
diff --git a/arch/score/include/asm/kmap_types.h b/arch/score/include/asm/kmap_types.h
new file mode 100644
index 000000000000..6c46eb5077d3
--- /dev/null
+++ b/arch/score/include/asm/kmap_types.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_KMAP_TYPES_H
+#define _ASM_SCORE_KMAP_TYPES_H
+
+#include <asm-generic/kmap_types.h>
+
+#endif /* _ASM_SCORE_KMAP_TYPES_H */
diff --git a/arch/score/include/asm/linkage.h b/arch/score/include/asm/linkage.h
new file mode 100644
index 000000000000..2323a8ecf445
--- /dev/null
+++ b/arch/score/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SCORE_LINKAGE_H
+#define _ASM_SCORE_LINKAGE_H
+
+#define __ALIGN .align 2
+#define __ALIGN_STR ".align 2"
+
+#endif /* _ASM_SCORE_LINKAGE_H */
diff --git a/arch/score/include/asm/local.h b/arch/score/include/asm/local.h
new file mode 100644
index 000000000000..7e02f13dbba8
--- /dev/null
+++ b/arch/score/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_LOCAL_H
+#define _ASM_SCORE_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_SCORE_LOCAL_H */
diff --git a/arch/score/include/asm/mman.h b/arch/score/include/asm/mman.h
new file mode 100644
index 000000000000..84d85ddfed8d
--- /dev/null
+++ b/arch/score/include/asm/mman.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MMAN_H
+#define _ASM_SCORE_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#endif /* _ASM_SCORE_MMAN_H */
diff --git a/arch/score/include/asm/mmu.h b/arch/score/include/asm/mmu.h
new file mode 100644
index 000000000000..676828e4c10a
--- /dev/null
+++ b/arch/score/include/asm/mmu.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MMU_H
+#define _ASM_SCORE_MMU_H
+
+typedef unsigned long mm_context_t;
+
+#endif /* _ASM_SCORE_MMU_H */
diff --git a/arch/score/include/asm/mmu_context.h b/arch/score/include/asm/mmu_context.h
new file mode 100644
index 000000000000..2644577c96e8
--- /dev/null
+++ b/arch/score/include/asm/mmu_context.h
@@ -0,0 +1,113 @@
+#ifndef _ASM_SCORE_MMU_CONTEXT_H
+#define _ASM_SCORE_MMU_CONTEXT_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm-generic/mm_hooks.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/scoreregs.h>
+
+/*
+ * For the fast tlb miss handlers, we keep a per cpu array of pointers
+ * to the current pgd for each processor. Also, the proc. id is stuffed
+ * into the context register.
+ */
+extern unsigned long asid_cache;
+extern unsigned long pgd_current;
+
+#define TLBMISS_HANDLER_SETUP_PGD(pgd) (pgd_current = (unsigned long)(pgd))
+
+#define TLBMISS_HANDLER_SETUP()				\
+do {							\
+	write_c0_context(0);				\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)	\
+} while (0)
+
+/*
+ * All unused by hardware upper bits will be considered
+ * as a software asid extension.
+ */
+#define ASID_VERSION_MASK	0xfffff000
+#define ASID_FIRST_VERSION	0x1000
+
+/* PEVN    --------- VPN ---------- --ASID--- -NA- */
+/* binary: 0000 0000 0000 0000 0000 0000 0001 0000 */
+/* binary: 0000 0000 0000 0000 0000 1111 1111 0000 */
+#define ASID_INC	0x10
+#define ASID_MASK	0xff0
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+				struct task_struct *tsk)
+{}
+
+static inline void
+get_new_mmu_context(struct mm_struct *mm)
+{
+	unsigned long asid = asid_cache + ASID_INC;
+
+	if (!(asid & ASID_MASK)) {
+		local_flush_tlb_all();		/* start new asid cycle */
+		if (!asid)			/* fix version if needed */
+			asid = ASID_FIRST_VERSION;
+	}
+
+	mm->context = asid;
+	asid_cache = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context = 0;
+	return 0;
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			struct task_struct *tsk)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if ((next->context ^ asid_cache) & ASID_VERSION_MASK)
+		get_new_mmu_context(next);
+
+	pevn_set(next->context);
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+	local_irq_restore(flags);
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{}
+
+static inline void
+deactivate_mm(struct task_struct *task, struct mm_struct *mm)
+{}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	get_new_mmu_context(next);
+	pevn_set(next->context);
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+	local_irq_restore(flags);
+}
+
+#endif /* _ASM_SCORE_MMU_CONTEXT_H */
diff --git a/arch/score/include/asm/module.h b/arch/score/include/asm/module.h
new file mode 100644
index 000000000000..f0b5dc0bd023
--- /dev/null
+++ b/arch/score/include/asm/module.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_SCORE_MODULE_H
+#define _ASM_SCORE_MODULE_H
+
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+struct mod_arch_specific {
+	/* Data Bus Error exception tables */
+	struct list_head dbe_list;
+	const struct exception_table_entry *dbe_start;
+	const struct exception_table_entry *dbe_end;
+};
+
+typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity. */
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+#define Elf_Addr	Elf32_Addr
+
+/* Given an address, look for it in the exception tables. */
+#ifdef CONFIG_MODULES
+const struct exception_table_entry *search_module_dbetables(unsigned long addr);
+#else
+static inline const struct exception_table_entry
+*search_module_dbetables(unsigned long addr)
+{
+	return NULL;
+}
+#endif
+
+#define MODULE_PROC_FAMILY "SCORE7"
+#define MODULE_KERNEL_TYPE "32BIT "
+#define MODULE_KERNEL_SMTC ""
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
+
+#endif /* _ASM_SCORE_MODULE_H */
diff --git a/arch/score/include/asm/msgbuf.h b/arch/score/include/asm/msgbuf.h
new file mode 100644
index 000000000000..7506721e29fa
--- /dev/null
+++ b/arch/score/include/asm/msgbuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MSGBUF_H
+#define _ASM_SCORE_MSGBUF_H
+
+#include <asm-generic/msgbuf.h>
+
+#endif /* _ASM_SCORE_MSGBUF_H */
diff --git a/arch/score/include/asm/mutex.h b/arch/score/include/asm/mutex.h
new file mode 100644
index 000000000000..10d48fe4db97
--- /dev/null
+++ b/arch/score/include/asm/mutex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MUTEX_H
+#define _ASM_SCORE_MUTEX_H
+
+#include <asm-generic/mutex-dec.h>
+
+#endif /* _ASM_SCORE_MUTEX_H */
diff --git a/arch/score/include/asm/page.h b/arch/score/include/asm/page.h
new file mode 100644
index 000000000000..ee5821042fcc
--- /dev/null
+++ b/arch/score/include/asm/page.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_SCORE_PAGE_H
+#define _ASM_SCORE_PAGE_H
+
+#include <linux/pfn.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
+#define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr, size)	(((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr, size)	((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr, size)	_ALIGN_UP(addr, size)
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. When not
+ * using MMU this corresponds to the first free page in physical memory (aligned
+ * on a page boundary).
+ */
+#define PAGE_OFFSET		(0xA0000000UL)
+
+#define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+#define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg) \
+			memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pte; } pte_t;		/* page table entry */
+typedef struct { unsigned long pgd; } pgd_t;		/* PGD table entry */
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) })
+#define __pgd(x)	((pgd_t) { (x) })
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#define __pa(x)		((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)		((void *)((unsigned long) (x) + PAGE_OFFSET))
+
+#define phys_to_pfn(phys)	(PFN_DOWN(phys))
+#define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
+
+#define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
+#define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
+
+#define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
+#define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+
+#define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
+#define page_to_bus(page)	(page_to_phys(page))
+#define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+
+#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
+
+#endif /* __ASSEMBLY__ */
+
+#define virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
+
+#endif /* __KERNEL__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* _ASM_SCORE_PAGE_H */
diff --git a/arch/score/include/asm/param.h b/arch/score/include/asm/param.h
new file mode 100644
index 000000000000..916b8690b6aa
--- /dev/null
+++ b/arch/score/include/asm/param.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_PARAM_H
+#define _ASM_SCORE_PARAM_H
+
+#include <asm-generic/param.h>
+
+#endif /* _ASM_SCORE_PARAM_H */
diff --git a/arch/score/include/asm/pci.h b/arch/score/include/asm/pci.h
new file mode 100644
index 000000000000..3f3cfd82549c
--- /dev/null
+++ b/arch/score/include/asm/pci.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_PCI_H
+#define _ASM_SCORE_PCI_H
+
+#endif /* _ASM_SCORE_PCI_H */
diff --git a/arch/score/include/asm/percpu.h b/arch/score/include/asm/percpu.h
new file mode 100644
index 000000000000..e7bd4e05b475
--- /dev/null
+++ b/arch/score/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_PERCPU_H
+#define _ASM_SCORE_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_SCORE_PERCPU_H */
diff --git a/arch/score/include/asm/pgalloc.h b/arch/score/include/asm/pgalloc.h
new file mode 100644
index 000000000000..059a61b7071b
--- /dev/null
+++ b/arch/score/include/asm/pgalloc.h
@@ -0,0 +1,83 @@
+#ifndef _ASM_SCORE_PGALLOC_H
+#define _ASM_SCORE_PGALLOC_H
+
+#include <linux/mm.h>
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+	pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+	pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+
+#define pmd_pgtable(pmd)	pmd_page(pmd)
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret, *init;
+
+	ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER);
+	if (ret) {
+		init = pgd_offset(&init_mm, 0UL);
+		pgd_init((unsigned long)ret);
+		memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
+		(PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+	}
+
+	return ret;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+	unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO,
+					PTE_ORDER);
+
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+	unsigned long address)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
+	if (pte) {
+		clear_highpage(pte);
+		pgtable_page_ctor(pte);
+	}
+	return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_pages((unsigned long)pte, PTE_ORDER);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_pages(pte, PTE_ORDER);
+}
+
+#define __pte_free_tlb(tlb, pte, buf)			\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), pte);			\
+} while (0)
+
+#define check_pgt_cache()		do {} while (0)
+
+#endif /* _ASM_SCORE_PGALLOC_H */
diff --git a/arch/score/include/asm/pgtable-bits.h b/arch/score/include/asm/pgtable-bits.h
new file mode 100644
index 000000000000..7d65a96a82e5
--- /dev/null
+++ b/arch/score/include/asm/pgtable-bits.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SCORE_PGTABLE_BITS_H
+#define _ASM_SCORE_PGTABLE_BITS_H
+
+#define _PAGE_ACCESSED			(1<<5)	/* implemented in software */
+#define _PAGE_READ			(1<<6)	/* implemented in software */
+#define _PAGE_WRITE			(1<<7)	/* implemented in software */
+#define _PAGE_PRESENT			(1<<9)	/* implemented in software */
+#define _PAGE_MODIFIED			(1<<10)	/* implemented in software */
+#define _PAGE_FILE			(1<<10)
+
+#define _PAGE_GLOBAL			(1<<0)
+#define _PAGE_VALID			(1<<1)
+#define _PAGE_SILENT_READ		(1<<1)	/* synonym */
+#define _PAGE_DIRTY			(1<<2)	/* Write bit */
+#define _PAGE_SILENT_WRITE		(1<<2)
+#define _PAGE_CACHE			(1<<3)	/* cache */
+#define _CACHE_MASK			(1<<3)
+#define _PAGE_BUFFERABLE		(1<<4)	/*Fallow Spec. */
+
+#define __READABLE	(_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
+#define _PAGE_CHG_MASK			\
+	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_CACHE)
+
+#endif /* _ASM_SCORE_PGTABLE_BITS_H */
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
new file mode 100644
index 000000000000..674934b40170
--- /dev/null
+++ b/arch/score/include/asm/pgtable.h
@@ -0,0 +1,287 @@
+#ifndef _ASM_SCORE_PGTABLE_H
+#define _ASM_SCORE_PGTABLE_H
+
+#include <linux/const.h>
+#include <asm-generic/pgtable-nopmd.h>
+
+#include <asm/fixmap.h>
+#include <asm/setup.h>
+#include <asm/pgtable-bits.h>
+
+extern void load_pgd(unsigned long pg_dir);
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	22
+#define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+/*
+ * Entries per page directory level: we use two-level, so
+ * we don't really have any PUD/PMD directory physically.
+ */
+#define PGD_ORDER	0
+#define PTE_ORDER	0
+
+#define PTRS_PER_PGD	1024
+#define PTRS_PER_PTE	1024
+
+#define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define VMALLOC_START		(0xc0000000UL)
+
+#define PKMAP_BASE		(0xfd000000UL)
+
+#define VMALLOC_END		(FIXADDR_START - 2*PAGE_SIZE)
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+		__FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+		__FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	\
+	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define __pgd_offset(address)	pgd_index(address)
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+
+#define pte_offset_map(dir, address)	\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)	\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+/*
+ * Bits 9(_PAGE_PRESENT) and 10(_PAGE_FILE)are taken,
+ * split up 30 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	30
+#define pte_to_pgoff(_pte)		\
+	(((_pte).pte & 0x1ff) | (((_pte).pte >> 11) << 9))
+#define pgoff_to_pte(off)		\
+	((pte_t) {((off) & 0x1ff) | (((off) >> 9) << 11) | _PAGE_FILE})
+#define __pte_to_swp_entry(pte)		\
+	((swp_entry_t) { pte_val(pte)})
+#define __swp_entry_to_pte(x)	((pte_t) {(x).val})
+
+#define pmd_phys(pmd)		__pa((void *)pmd_val(pmd))
+#define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+#define pte_clear(mm, addr, xp)		\
+	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)		do { } while (0)
+
+#define kern_addr_valid(addr)	(1)
+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
+
+#define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_CACHE)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				_PAGE_CACHE)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHE)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHE)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
+				_PAGE_GLOBAL | _PAGE_CACHE)
+#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
+				__WRITEABLE | _PAGE_GLOBAL & ~_PAGE_CACHE)
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
+
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot = (prot & ~_CACHE_MASK);
+
+	return __pgprot(prot);
+}
+
+#define __swp_type(x)		((x).val & 0x1f)
+#define __swp_offset(x) 	((x).val >> 11)
+#define __swp_entry(type, offset) ((swp_entry_t){(type) | ((offset) << 11)})
+
+extern unsigned long empty_zero_page;
+extern unsigned long zero_page_mask;
+
+#define ZERO_PAGE(vaddr) \
+	(virt_to_page((void *)(empty_zero_page + \
+	 (((unsigned long)(vaddr)) & zero_page_mask))))
+
+#define pgtable_cache_init()	do {} while (0)
+
+#define arch_enter_lazy_cpu_mode()	do {} while (0)
+
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_WRITE;
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_MODIFIED;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_ACCESSED;
+}
+
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_FILE;
+}
+
+#define pte_special(pte)	(0)
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_MODIFIED)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_MODIFIED;
+	if (pte_val(pte) & _PAGE_WRITE)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_ACCESSED;
+	if (pte_val(pte) & _PAGE_READ)
+		pte_val(pte) |= _PAGE_SILENT_READ;
+	return pte;
+}
+
+#define set_pmd(pmdptr, pmdval)		\
+	 do { *(pmdptr) = (pmdval); } while (0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+extern unsigned long pgd_current;
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+extern void __update_tlb(struct vm_area_struct *vma,
+	unsigned long address,	pte_t pte);
+extern void __update_cache(struct vm_area_struct *vma,
+	unsigned long address,	pte_t pte);
+
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+	unsigned long address, pte_t pte)
+{
+	__update_tlb(vma, address, pte);
+	__update_cache(vma, address, pte);
+}
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/pgtable.h>
+
+void setup_memory(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_SCORE_PGTABLE_H */
diff --git a/arch/score/include/asm/poll.h b/arch/score/include/asm/poll.h
new file mode 100644
index 000000000000..18532db02861
--- /dev/null
+++ b/arch/score/include/asm/poll.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_POLL_H
+#define _ASM_SCORE_POLL_H
+
+#include <asm-generic/poll.h>
+
+#endif /* _ASM_SCORE_POLL_H */
diff --git a/arch/score/include/asm/posix_types.h b/arch/score/include/asm/posix_types.h
new file mode 100644
index 000000000000..b88acf80048a
--- /dev/null
+++ b/arch/score/include/asm/posix_types.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_POSIX_TYPES_H
+#define _ASM_SCORE_POSIX_TYPES_H
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _ASM_SCORE_POSIX_TYPES_H */
diff --git a/arch/score/include/asm/processor.h b/arch/score/include/asm/processor.h
new file mode 100644
index 000000000000..7e22f216d771
--- /dev/null
+++ b/arch/score/include/asm/processor.h
@@ -0,0 +1,106 @@
+#ifndef _ASM_SCORE_PROCESSOR_H
+#define _ASM_SCORE_PROCESSOR_H
+
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+
+#include <asm/segment.h>
+
+struct task_struct;
+
+/*
+ * System setup and hardware flags..
+ */
+extern void (*cpu_wait)(void);
+
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+extern void start_thread(struct pt_regs *regs,
+			unsigned long pc, unsigned long sp);
+extern unsigned long get_wchan(struct task_struct *p);
+
+/*
+ * Return current * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+#define cpu_relax()		barrier()
+#define release_thread(thread)	do {} while (0)
+#define prepare_to_copy(tsk)	do {} while (0)
+
+/*
+ * User space process size: 2GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	0x7fff8000UL
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	((TASK_SIZE / 3) & ~(PAGE_SIZE))
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+/*
+ * If you change thread_struct remember to change the #defines below too!
+ */
+struct thread_struct {
+	unsigned long reg0, reg2, reg3;
+	unsigned long reg12, reg13, reg14, reg15, reg16;
+	unsigned long reg17, reg18, reg19, reg20, reg21;
+
+	unsigned long cp0_psr;
+	unsigned long cp0_ema;		/* Last user fault */
+	unsigned long cp0_badvaddr;	/* Last user fault */
+	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
+	unsigned long error_code;
+	unsigned long trap_no;
+
+	unsigned long mflags;
+	unsigned long reg29;
+
+	unsigned long single_step;
+	unsigned long ss_nextcnt;
+
+	unsigned long insn1_type;
+	unsigned long addr1;
+	unsigned long insn1;
+
+	unsigned long insn2_type;
+	unsigned long addr2;
+	unsigned long insn2;
+
+	mm_segment_t current_ds;
+};
+
+#define INIT_THREAD {						\
+	.reg0			= 0,				\
+	.reg2			= 0,				\
+	.reg3			= 0,				\
+	.reg12			= 0,				\
+	.reg13			= 0,				\
+	.reg14			= 0,				\
+	.reg15			= 0,				\
+	.reg16			= 0,				\
+	.reg17			= 0,				\
+	.reg18			= 0,				\
+	.reg19			= 0,				\
+	.reg20			= 0,				\
+	.reg21			= 0,				\
+	.cp0_psr		= 0,				\
+	.error_code		= 0,				\
+	.trap_no		= 0,				\
+}
+
+#define kstk_tos(tsk)		\
+	((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
+#define task_pt_regs(tsk)	((struct pt_regs *)kstk_tos(tsk) - 1)
+
+#define KSTK_EIP(tsk)		(task_pt_regs(tsk)->cp0_epc)
+#define KSTK_ESP(tsk)		(task_pt_regs(tsk)->regs[29])
+
+#endif /* _ASM_SCORE_PROCESSOR_H */
diff --git a/arch/score/include/asm/ptrace.h b/arch/score/include/asm/ptrace.h
new file mode 100644
index 000000000000..d40e691f23e2
--- /dev/null
+++ b/arch/score/include/asm/ptrace.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_SCORE_PTRACE_H
+#define _ASM_SCORE_PTRACE_H
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+
+#define PC		32
+#define CONDITION	33
+#define ECR		34
+#define EMA		35
+#define CEH		36
+#define CEL		37
+#define COUNTER		38
+#define LDCR		39
+#define STCR		40
+#define PSR		41
+
+#define SINGLESTEP16_INSN	0x7006
+#define SINGLESTEP32_INSN	0x840C8000
+#define BREAKPOINT16_INSN	0x7002		/* work on SPG300 */
+#define BREAKPOINT32_INSN	0x84048000	/* work on SPG300 */
+
+/* Define instruction mask */
+#define INSN32_MASK	0x80008000
+
+#define J32	0x88008000	/* 1_00010_0000000000_1_000000000000000 */
+#define J32M	0xFC008000	/* 1_11111_0000000000_1_000000000000000 */
+
+#define B32	0x90008000	/* 1_00100_0000000000_1_000000000000000 */
+#define B32M	0xFC008000
+#define BL32	0x90008001	/* 1_00100_0000000000_1_000000000000001 */
+#define BL32M	B32
+#define BR32	0x80008008	/* 1_00000_0000000000_1_00000000_000100_0 */
+#define BR32M	0xFFE0807E
+#define BRL32	0x80008009	/* 1_00000_0000000000_1_00000000_000100_1 */
+#define BRL32M	BR32M
+
+#define B32_SET	(J32 | B32 | BL32 | BR32 | BRL32)
+
+#define J16	0x3000		/* 0_011_....... */
+#define J16M	0xF000
+#define B16	0x4000		/* 0_100_....... */
+#define B16M	0xF000
+#define BR16	0x0004		/* 0_000.......0100 */
+#define BR16M	0xF00F
+#define B16_SET (J16 | B16 | BR16)
+
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception. As usual the registers k0/k1 aren't being saved.
+ */
+struct pt_regs {
+	unsigned long pad0[6];	/* stack arguments */
+	unsigned long orig_r4;
+	unsigned long orig_r7;
+	long is_syscall;
+
+	unsigned long regs[32];
+
+	unsigned long cel;
+	unsigned long ceh;
+
+	unsigned long sr0;	/* cnt */
+	unsigned long sr1;	/* lcr */
+	unsigned long sr2;	/* scr */
+
+	unsigned long cp0_epc;
+	unsigned long cp0_ema;
+	unsigned long cp0_psr;
+	unsigned long cp0_ecr;
+	unsigned long cp0_condition;
+};
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+/*
+ * Does the process account for user or for system time?
+ */
+#define user_mode(regs) 	((regs->cp0_psr & 8) == 8)
+
+#define instruction_pointer(regs)	((unsigned long)(regs)->cp0_epc)
+#define profile_pc(regs)		instruction_pointer(regs)
+
+extern void do_syscall_trace(struct pt_regs *regs, int entryexit);
+extern int read_tsk_long(struct task_struct *, unsigned long, unsigned long *);
+extern int read_tsk_short(struct task_struct *, unsigned long,
+			 unsigned short *);
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SCORE_PTRACE_H */
diff --git a/arch/score/include/asm/resource.h b/arch/score/include/asm/resource.h
new file mode 100644
index 000000000000..9ce22bc7b475
--- /dev/null
+++ b/arch/score/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_RESOURCE_H
+#define _ASM_SCORE_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_SCORE_RESOURCE_H */
diff --git a/arch/score/include/asm/scatterlist.h b/arch/score/include/asm/scatterlist.h
new file mode 100644
index 000000000000..9f533b8362c7
--- /dev/null
+++ b/arch/score/include/asm/scatterlist.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SCATTERLIST_H
+#define _ASM_SCORE_SCATTERLIST_H
+
+#include <asm-generic/scatterlist.h>
+
+#endif /* _ASM_SCORE_SCATTERLIST_H */
diff --git a/arch/score/include/asm/scoreregs.h b/arch/score/include/asm/scoreregs.h
new file mode 100644
index 000000000000..d0ad29204518
--- /dev/null
+++ b/arch/score/include/asm/scoreregs.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_SCORE_SCOREREGS_H
+#define _ASM_SCORE_SCOREREGS_H
+
+#include <linux/linkage.h>
+
+/* TIMER register */
+#define TIME0BASE		0x96080000
+#define P_TIMER0_CTRL		(TIME0BASE + 0x00)
+#define P_TIMER0_CPP_CTRL	(TIME0BASE + 0x04)
+#define P_TIMER0_PRELOAD	(TIME0BASE + 0x08)
+#define P_TIMER0_CPP_REG	(TIME0BASE + 0x0C)
+#define P_TIMER0_UPCNT		(TIME0BASE + 0x10)
+
+/* Timer Controller Register */
+/* bit 0 Timer enable */
+#define TMR_DISABLE	0x0000
+#define TMR_ENABLE	0x0001
+
+/* bit 1 Interrupt enable */
+#define TMR_IE_DISABLE	0x0000
+#define TMR_IE_ENABLE	0x0002
+
+/* bit 2 Output enable */
+#define TMR_OE_DISABLE	0x0004
+#define TMR_OE_ENABLE	0x0000
+
+/* bit4 Up/Down counting selection */
+#define TMR_UD_DOWN	0x0000
+#define TMR_UD_UP	0x0010
+
+/* bit5 Up/Down counting control selection */
+#define TMR_UDS_UD	0x0000
+#define TMR_UDS_EXTUD	0x0020
+
+/* bit6 Time output mode */
+#define TMR_OM_TOGGLE	0x0000
+#define TMR_OM_PILSE	0x0040
+
+/* bit 8..9 External input active edge selection */
+#define TMR_ES_PE	0x0000
+#define TMR_ES_NE	0x0100
+#define TMR_ES_BOTH	0x0200
+
+/* bit 10..11 Operating mode */
+#define TMR_M_FREE	0x0000 /* free running timer mode */
+#define TMR_M_PERIODIC	0x0400 /* periodic timer mode */
+#define TMR_M_FC	0x0800 /* free running counter mode */
+#define TMR_M_PC	0x0c00 /* periodic counter mode */
+
+#define SYSTEM_CLOCK		(27*1000000/4)		/* 27 MHz */
+#endif /* _ASM_SCORE_SCOREREGS_H */
diff --git a/arch/score/include/asm/sections.h b/arch/score/include/asm/sections.h
new file mode 100644
index 000000000000..9441d23af005
--- /dev/null
+++ b/arch/score/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SECTIONS_H
+#define _ASM_SCORE_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_SCORE_SECTIONS_H */
diff --git a/arch/score/include/asm/segment.h b/arch/score/include/asm/segment.h
new file mode 100644
index 000000000000..e16cf6afb495
--- /dev/null
+++ b/arch/score/include/asm/segment.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SCORE_SEGMENT_H
+#define _ASM_SCORE_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define KERNEL_DS	((mm_segment_t){0})
+#define USER_DS	KERNEL_DS
+
+# define get_ds()	(KERNEL_DS)
+# define get_fs()	(current_thread_info()->addr_limit)
+# define set_fs(x)	\
+	do { current_thread_info()->addr_limit = (x); } while (0)
+
+# define segment_eq(a, b)	((a).seg == (b).seg)
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_SCORE_SEGMENT_H */
diff --git a/arch/score/include/asm/sembuf.h b/arch/score/include/asm/sembuf.h
new file mode 100644
index 000000000000..dae5e835ce9e
--- /dev/null
+++ b/arch/score/include/asm/sembuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SEMBUF_H
+#define _ASM_SCORE_SEMBUF_H
+
+#include <asm-generic/sembuf.h>
+
+#endif /* _ASM_SCORE_SEMBUF_H */
diff --git a/arch/score/include/asm/setup.h b/arch/score/include/asm/setup.h
new file mode 100644
index 000000000000..3cb944dc68dc
--- /dev/null
+++ b/arch/score/include/asm/setup.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_SCORE_SETUP_H
+#define _ASM_SCORE_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+#define MEMORY_START		0
+#define MEMORY_SIZE		0x2000000
+
+#ifdef __KERNEL__
+
+extern void pagetable_init(void);
+extern void pgd_init(unsigned long page);
+
+extern void setup_early_printk(void);
+extern void cpu_cache_init(void);
+extern void tlb_init(void);
+
+extern void handle_nmi(void);
+extern void handle_adelinsn(void);
+extern void handle_adedata(void);
+extern void handle_ibe(void);
+extern void handle_pel(void);
+extern void handle_sys(void);
+extern void handle_ccu(void);
+extern void handle_ri(void);
+extern void handle_tr(void);
+extern void handle_ades(void);
+extern void handle_cee(void);
+extern void handle_cpe(void);
+extern void handle_dve(void);
+extern void handle_dbe(void);
+extern void handle_reserved(void);
+extern void handle_tlb_refill(void);
+extern void handle_tlb_invaild(void);
+extern void handle_mod(void);
+extern void debug_exception_vector(void);
+extern void general_exception_vector(void);
+extern void interrupt_exception_vector(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SCORE_SETUP_H */
diff --git a/arch/score/include/asm/shmbuf.h b/arch/score/include/asm/shmbuf.h
new file mode 100644
index 000000000000..c85b2429ba21
--- /dev/null
+++ b/arch/score/include/asm/shmbuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SHMBUF_H
+#define _ASM_SCORE_SHMBUF_H
+
+#include <asm-generic/shmbuf.h>
+
+#endif /* _ASM_SCORE_SHMBUF_H */
diff --git a/arch/score/include/asm/shmparam.h b/arch/score/include/asm/shmparam.h
new file mode 100644
index 000000000000..1d60813141b6
--- /dev/null
+++ b/arch/score/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SHMPARAM_H
+#define _ASM_SCORE_SHMPARAM_H
+
+#include <asm-generic/shmparam.h>
+
+#endif /* _ASM_SCORE_SHMPARAM_H */
diff --git a/arch/score/include/asm/sigcontext.h b/arch/score/include/asm/sigcontext.h
new file mode 100644
index 000000000000..5ffda39ddb90
--- /dev/null
+++ b/arch/score/include/asm/sigcontext.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_SCORE_SIGCONTEXT_H
+#define _ASM_SCORE_SIGCONTEXT_H
+
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/score/tools/offset.c
+ */
+struct sigcontext {
+	unsigned int		sc_regmask;
+	unsigned int		sc_psr;
+	unsigned int		sc_condition;
+	unsigned long		sc_pc;
+	unsigned long		sc_regs[32];
+	unsigned int		sc_ssflags;
+	unsigned int		sc_mdceh;
+	unsigned int		sc_mdcel;
+	unsigned int		sc_ecr;
+	unsigned long		sc_ema;
+	unsigned long		sc_sigset[4];
+};
+
+#endif /* _ASM_SCORE_SIGCONTEXT_H */
diff --git a/arch/score/include/asm/siginfo.h b/arch/score/include/asm/siginfo.h
new file mode 100644
index 000000000000..87ca35607a28
--- /dev/null
+++ b/arch/score/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SIGINFO_H
+#define _ASM_SCORE_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_SCORE_SIGINFO_H */
diff --git a/arch/score/include/asm/signal.h b/arch/score/include/asm/signal.h
new file mode 100644
index 000000000000..2605bc06b64f
--- /dev/null
+++ b/arch/score/include/asm/signal.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SIGNAL_H
+#define _ASM_SCORE_SIGNAL_H
+
+#include <asm-generic/signal.h>
+
+#endif /* _ASM_SCORE_SIGNAL_H */
diff --git a/arch/score/include/asm/socket.h b/arch/score/include/asm/socket.h
new file mode 100644
index 000000000000..612a70e385ba
--- /dev/null
+++ b/arch/score/include/asm/socket.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SOCKET_H
+#define _ASM_SCORE_SOCKET_H
+
+#include <asm-generic/socket.h>
+
+#endif /* _ASM_SCORE_SOCKET_H */
diff --git a/arch/score/include/asm/sockios.h b/arch/score/include/asm/sockios.h
new file mode 100644
index 000000000000..ba8256480189
--- /dev/null
+++ b/arch/score/include/asm/sockios.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SOCKIOS_H
+#define _ASM_SCORE_SOCKIOS_H
+
+#include <asm-generic/sockios.h>
+
+#endif /* _ASM_SCORE_SOCKIOS_H */
diff --git a/arch/score/include/asm/stat.h b/arch/score/include/asm/stat.h
new file mode 100644
index 000000000000..5037055500a2
--- /dev/null
+++ b/arch/score/include/asm/stat.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_STAT_H
+#define _ASM_SCORE_STAT_H
+
+#include <asm-generic/stat.h>
+
+#endif /* _ASM_SCORE_STAT_H */
diff --git a/arch/score/include/asm/statfs.h b/arch/score/include/asm/statfs.h
new file mode 100644
index 000000000000..36e41004e996
--- /dev/null
+++ b/arch/score/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_STATFS_H
+#define _ASM_SCORE_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_SCORE_STATFS_H */
diff --git a/arch/score/include/asm/string.h b/arch/score/include/asm/string.h
new file mode 100644
index 000000000000..8a6bf5063aa5
--- /dev/null
+++ b/arch/score/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SCORE_STRING_H
+#define _ASM_SCORE_STRING_H
+
+extern void *memset(void *__s, int __c, size_t __count);
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#endif /* _ASM_SCORE_STRING_H */
diff --git a/arch/score/include/asm/swab.h b/arch/score/include/asm/swab.h
new file mode 100644
index 000000000000..fadc3cc6d8a2
--- /dev/null
+++ b/arch/score/include/asm/swab.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SWAB_H
+#define _ASM_SCORE_SWAB_H
+
+#include <asm-generic/swab.h>
+
+#endif /* _ASM_SCORE_SWAB_H */
diff --git a/arch/score/include/asm/syscalls.h b/arch/score/include/asm/syscalls.h
new file mode 100644
index 000000000000..1dd5e0d6b0c3
--- /dev/null
+++ b/arch/score/include/asm/syscalls.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SCORE_SYSCALLS_H
+#define _ASM_SCORE_SYSCALLS_H
+
+asmlinkage long score_clone(struct pt_regs *regs);
+asmlinkage long score_execve(struct pt_regs *regs);
+asmlinkage long score_sigaltstack(struct pt_regs *regs);
+asmlinkage long score_rt_sigreturn(struct pt_regs *regs);
+
+#include <asm-generic/syscalls.h>
+
+#endif /* _ASM_SCORE_SYSCALLS_H */
diff --git a/arch/score/include/asm/system.h b/arch/score/include/asm/system.h
new file mode 100644
index 000000000000..589d5c7e171c
--- /dev/null
+++ b/arch/score/include/asm/system.h
@@ -0,0 +1,90 @@
+#ifndef _ASM_SCORE_SYSTEM_H
+#define _ASM_SCORE_SYSTEM_H
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+struct pt_regs;
+struct task_struct;
+
+extern void *resume(void *last, void *next, void *next_ti);
+
+#define switch_to(prev, next, last)				\
+do {								\
+	(last) = resume(prev, next, task_thread_info(next));	\
+} while (0)
+
+#define finish_arch_switch(prev)	do {} while (0)
+
+typedef void (*vi_handler_t)(void);
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#define mb()		barrier()
+#define rmb()		barrier()
+#define wmb()		barrier()
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+
+#define read_barrier_depends()		do {} while (0)
+#define smp_read_barrier_depends()	do {} while (0)
+
+#define set_mb(var, value) 		do {var = value; wmb(); } while (0)
+
+#define __HAVE_ARCH_CMPXCHG	1
+
+#include <asm-generic/cmpxchg-local.h>
+
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define xchg(ptr, v)						\
+	((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr),	\
+					(unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+				unsigned long old, unsigned long new)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define cmpxchg(ptr, o, n)					\
+	((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr),	\
+					(unsigned long)(o),	\
+					(unsigned long)(n)))
+
+extern void __die(const char *, struct pt_regs *, const char *,
+	const char *, unsigned long) __attribute__((noreturn));
+extern void __die_if_kernel(const char *, struct pt_regs *, const char *,
+	const char *, unsigned long);
+
+#define die(msg, regs)							\
+	__die(msg, regs, __FILE__ ":", __func__, __LINE__)
+#define die_if_kernel(msg, regs)					\
+	__die_if_kernel(msg, regs, __FILE__ ":", __func__, __LINE__)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_SCORE_SYSTEM_H */
diff --git a/arch/score/include/asm/termbits.h b/arch/score/include/asm/termbits.h
new file mode 100644
index 000000000000..9a95c1412437
--- /dev/null
+++ b/arch/score/include/asm/termbits.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TERMBITS_H
+#define _ASM_SCORE_TERMBITS_H
+
+#include <asm-generic/termbits.h>
+
+#endif /* _ASM_SCORE_TERMBITS_H */
diff --git a/arch/score/include/asm/termios.h b/arch/score/include/asm/termios.h
new file mode 100644
index 000000000000..40984e811ad6
--- /dev/null
+++ b/arch/score/include/asm/termios.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TERMIOS_H
+#define _ASM_SCORE_TERMIOS_H
+
+#include <asm-generic/termios.h>
+
+#endif /* _ASM_SCORE_TERMIOS_H */
diff --git a/arch/score/include/asm/thread_info.h b/arch/score/include/asm/thread_info.h
new file mode 100644
index 000000000000..3a1122885528
--- /dev/null
+++ b/arch/score/include/asm/thread_info.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_SCORE_THREAD_INFO_H
+#define _ASM_SCORE_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define KU_MASK	0x08
+#define KU_USER	0x08
+#define KU_KERN	0x00
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		tp_value;	/* thread pointer */
+	__u32			cpu;		/* current CPU */
+
+	/* 0 => preemptable, < 0 => BUG */
+	int			preempt_count;
+
+	/*
+	 * thread address space:
+	 * 0-0xBFFFFFFF for user-thead
+	 * 0-0xFFFFFFFF for kernel-thread
+	 */
+	mm_segment_t		addr_limit;
+	struct restart_block	restart_block;
+	struct pt_regs		*regs;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C. */
+register struct thread_info *__current_thread_info __asm__("r28");
+#define current_thread_info()	__current_thread_info
+
+/* thread information allocation */
+#define THREAD_SIZE_ORDER 	(1)
+#define THREAD_SIZE 		(PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_MASK 		(THREAD_SIZE - 1UL)
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#define free_thread_info(info) kfree(info)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
+#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling
+						 TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		(0x0000ffff)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SCORE_THREAD_INFO_H */
diff --git a/arch/score/include/asm/timex.h b/arch/score/include/asm/timex.h
new file mode 100644
index 000000000000..a524ae0c5e7b
--- /dev/null
+++ b/arch/score/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SCORE_TIMEX_H
+#define _ASM_SCORE_TIMEX_H
+
+#define CLOCK_TICK_RATE 27000000 /* Timer input freq. */
+
+#include <asm-generic/timex.h>
+
+#endif /* _ASM_SCORE_TIMEX_H */
diff --git a/arch/score/include/asm/tlb.h b/arch/score/include/asm/tlb.h
new file mode 100644
index 000000000000..46882ed524e6
--- /dev/null
+++ b/arch/score/include/asm/tlb.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_SCORE_TLB_H
+#define _ASM_SCORE_TLB_H
+
+/*
+ * SCORE doesn't need any special per-pte or per-vma handling, except
+ * we need to flush cache for area to be unmapped.
+ */
+#define tlb_start_vma(tlb, vma)		do {} while (0)
+#define tlb_end_vma(tlb, vma)		do {} while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do {} while (0)
+#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
+
+extern void score7_FTLB_refill_Handler(void);
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_SCORE_TLB_H */
diff --git a/arch/score/include/asm/tlbflush.h b/arch/score/include/asm/tlbflush.h
new file mode 100644
index 000000000000..9cce978367d5
--- /dev/null
+++ b/arch/score/include/asm/tlbflush.h
@@ -0,0 +1,142 @@
+#ifndef _ASM_SCORE_TLBFLUSH_H
+#define _ASM_SCORE_TLBFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb_all() flushes all processes TLB entries
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+	unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long page);
+extern void local_flush_tlb_one(unsigned long vaddr);
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_range(vma, vmaddr, end) \
+	local_flush_tlb_range(vma, vmaddr, end)
+#define flush_tlb_kernel_range(vmaddr, end) \
+	local_flush_tlb_kernel_range(vmaddr, end)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(vaddr)		local_flush_tlb_one(vaddr)
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long pevn_get(void)
+{
+	unsigned long val;
+
+	__asm__ __volatile__(
+		"mfcr %0, cr11\n"
+		"nop\nnop\n"
+		: "=r" (val));
+
+	return val;
+}
+
+static inline void pevn_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr11\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (val));
+}
+
+static inline void pectx_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr12\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (val));
+}
+
+static inline unsigned long pectx_get(void)
+{
+	unsigned long val;
+	__asm__ __volatile__(
+		"mfcr %0, cr12\n"
+		"nop\nnop\n"
+	: "=r" (val));
+	return val;
+}
+static inline unsigned long tlblock_get(void)
+{
+	unsigned long val;
+
+	__asm__ __volatile__(
+		"mfcr %0, cr7\n"
+		"nop\nnop\n"
+	: "=r" (val));
+	return val;
+}
+static inline void tlblock_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr7\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (val));
+}
+
+static inline void tlbpt_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr8\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (val));
+}
+
+static inline long tlbpt_get(void)
+{
+	long val;
+
+	__asm__ __volatile__(
+		"mfcr %0, cr8\n"
+		"nop\nnop\n"
+		: "=r" (val));
+
+	return val;
+}
+
+static inline void peaddr_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr9\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (val));
+}
+
+/* TLB operations. */
+static inline void tlb_probe(void)
+{
+	__asm__ __volatile__("stlb;nop;nop;nop;nop;nop");
+}
+
+static inline void tlb_read(void)
+{
+	__asm__ __volatile__("mftlb;nop;nop;nop;nop;nop");
+}
+
+static inline void tlb_write_indexed(void)
+{
+	__asm__ __volatile__("mtptlb;nop;nop;nop;nop;nop");
+}
+
+static inline void tlb_write_random(void)
+{
+	__asm__ __volatile__("mtrtlb;nop;nop;nop;nop;nop");
+}
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif /* _ASM_SCORE_TLBFLUSH_H */
diff --git a/arch/score/include/asm/topology.h b/arch/score/include/asm/topology.h
new file mode 100644
index 000000000000..425fba381f88
--- /dev/null
+++ b/arch/score/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TOPOLOGY_H
+#define _ASM_SCORE_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SCORE_TOPOLOGY_H */
diff --git a/arch/score/include/asm/types.h b/arch/score/include/asm/types.h
new file mode 100644
index 000000000000..2140032778ee
--- /dev/null
+++ b/arch/score/include/asm/types.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TYPES_H
+#define _ASM_SCORE_TYPES_H
+
+#include <asm-generic/types.h>
+
+#endif /* _ASM_SCORE_TYPES_H */
diff --git a/arch/score/include/asm/uaccess.h b/arch/score/include/asm/uaccess.h
new file mode 100644
index 000000000000..ab66ddde777b
--- /dev/null
+++ b/arch/score/include/asm/uaccess.h
@@ -0,0 +1,424 @@
+#ifndef __SCORE_UACCESS_H
+#define __SCORE_UACCESS_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+
+#define VERIFY_READ		0
+#define VERIFY_WRITE		1
+
+#define get_ds()		(KERNEL_DS)
+#define get_fs()		(current_thread_info()->addr_limit)
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+/*
+ * Is a address valid? This does a straighforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - AND "addr+size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ *
+ * __ua_size() is a trick to avoid runtime checking of positive constant
+ * sizes; for those we already know at compile time that the size is ok.
+ */
+#define __ua_size(size)							\
+	((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size))
+
+/*
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+
+#define __access_ok(addr, size)					\
+	(((long)((get_fs().seg) &				\
+		 ((addr) | ((addr) + (size)) |			\
+		  __ua_size(size)))) == 0)
+
+#define access_ok(type, addr, size)				\
+	likely(__access_ok((unsigned long)(addr), (size)))
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+extern void __get_user_unknown(void);
+
+#define __get_user_common(val, size, ptr)				\
+do {									\
+	switch (size) {							\
+	case 1:								\
+		__get_user_asm(val, "lb", ptr);				\
+		break;							\
+	case 2:								\
+		__get_user_asm(val, "lh", ptr);				\
+		 break;							\
+	case 4:								\
+		__get_user_asm(val, "lw", ptr);				\
+		 break;							\
+	case 8: 							\
+		if ((copy_from_user((void *)&val, ptr, 8)) == 0)	\
+			__gu_err = 0;					\
+		else							\
+			__gu_err = -EFAULT;				\
+		break;							\
+	default:							\
+		__get_user_unknown();					\
+		break;							\
+	}								\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	long __gu_err = 0;						\
+	__get_user_common((x), size, ptr);				\
+	__gu_err;							\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);		\
+									\
+	if (likely(access_ok(VERIFY_READ, __gu_ptr, size)))		\
+		__get_user_common((x), size, __gu_ptr);			\
+									\
+	__gu_err;							\
+})
+
+#define __get_user_asm(val, insn, addr)					\
+{									\
+	long __gu_tmp;							\
+									\
+	__asm__ __volatile__(						\
+		"1:" insn " %1, %3\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"3:li	%0, %4\n"					\
+		"j	2b\n"						\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		".word	1b, 3b\n"					\
+		".previous\n"						\
+		: "=r" (__gu_err), "=r" (__gu_tmp)			\
+		: "0" (0), "o" (__m(addr)), "i" (-EFAULT));		\
+									\
+		(val) = (__typeof__(*(addr))) __gu_tmp;			\
+}
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#define __put_user_nocheck(val, ptr, size)				\
+({									\
+	__typeof__(*(ptr)) __pu_val;					\
+	long __pu_err = 0;						\
+									\
+	__pu_val = (val);						\
+	switch (size) {							\
+	case 1:								\
+		__put_user_asm("sb", ptr);				\
+		break;							\
+	case 2:								\
+		__put_user_asm("sh", ptr);				\
+		break;							\
+	case 4:								\
+		__put_user_asm("sw", ptr);				\
+		break;							\
+	case 8: 							\
+		if ((__copy_to_user((void *)ptr, &__pu_val, 8)) == 0)	\
+			__pu_err = 0;					\
+		else							\
+			__pu_err = -EFAULT;				\
+		break;							\
+	default:							\
+		 __put_user_unknown();					\
+		 break;							\
+	}								\
+	__pu_err;							\
+})
+
+
+#define __put_user_check(val, ptr, size)				\
+({									\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	__typeof__(*(ptr)) __pu_val = (val);				\
+	long __pu_err = -EFAULT;					\
+									\
+	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) {		\
+		switch (size) {						\
+		case 1:							\
+			__put_user_asm("sb", __pu_addr);		\
+			break;						\
+		case 2:							\
+			__put_user_asm("sh", __pu_addr);		\
+			break;						\
+		case 4:							\
+			__put_user_asm("sw", __pu_addr);		\
+			break;						\
+		case 8: 						\
+			if ((__copy_to_user((void *)__pu_addr, &__pu_val, 8)) == 0)\
+				__pu_err = 0;				\
+			else						\
+				__pu_err = -EFAULT;			\
+			break;						\
+		default:						\
+			__put_user_unknown();				\
+			break;						\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(insn, ptr)					\
+	__asm__ __volatile__(						\
+		"1:" insn " %2, %3\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"3:li %0, %4\n"						\
+		"j 2b\n"						\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		".word 1b, 3b\n"					\
+		".previous\n"						\
+		: "=r" (__pu_err)					\
+		: "0" (0), "r" (__pu_val), "o" (__m(ptr)),		\
+		  "i" (-EFAULT));
+
+extern void __put_user_unknown(void);
+extern int __copy_tofrom_user(void *to, const void *from, unsigned long len);
+
+static inline unsigned long
+copy_from_user(void *to, const void *from, unsigned long len)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_READ, from, len))
+		return __copy_tofrom_user(to, from, len);
+
+	if ((unsigned long)from < TASK_SIZE) {
+		over = (unsigned long)from + len - TASK_SIZE;
+		return __copy_tofrom_user(to, from, len - over) + over;
+	}
+	return len;
+}
+
+static inline unsigned long
+copy_to_user(void *to, const void *from, unsigned long len)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_WRITE, to, len))
+		return __copy_tofrom_user(to, from, len);
+
+	if ((unsigned long)to < TASK_SIZE) {
+		over = (unsigned long)to + len - TASK_SIZE;
+		return __copy_tofrom_user(to, from, len - over) + over;
+	}
+	return len;
+}
+
+#define __copy_from_user(to, from, len)	\
+		__copy_tofrom_user((to), (from), (len))
+
+#define __copy_to_user(to, from, len)		\
+		__copy_tofrom_user((to), (from), (len))
+
+static inline unsigned long
+__copy_to_user_inatomic(void *to, const void *from, unsigned long len)
+{
+	return __copy_to_user(to, from, len);
+}
+
+static inline unsigned long
+__copy_from_user_inatomic(void *to, const void *from, unsigned long len)
+{
+	return __copy_from_user(to, from, len);
+}
+
+#define __copy_in_user(to, from, len)	__copy_from_user(to, from, len)
+
+static inline unsigned long
+copy_in_user(void *to, const void *from, unsigned long len)
+{
+	if (access_ok(VERIFY_READ, from, len) &&
+		      access_ok(VERFITY_WRITE, to, len))
+		return copy_from_user(to, from, len);
+}
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern unsigned long __clear_user(void __user *src, unsigned long size);
+
+static inline unsigned long clear_user(char *src, unsigned long size)
+{
+	if (access_ok(VERIFY_WRITE, src, size))
+		return __clear_user(src, size);
+
+	return -EFAULT;
+}
+/*
+ * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+extern int __strncpy_from_user(char *dst, const char *src, long len);
+
+static inline int strncpy_from_user(char *dst, const char *src, long len)
+{
+	if (access_ok(VERIFY_READ, src, 1))
+		return __strncpy_from_user(dst, src, len);
+
+	return -EFAULT;
+}
+
+extern int __strlen_user(const char *src);
+static inline long strlen_user(const char __user *src)
+{
+	return __strlen_user(src);
+}
+
+extern int __strnlen_user(const char *str, long len);
+static inline long strnlen_user(const char __user *str, long len)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else		
+		return __strnlen_user(str, len);
+}
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* __SCORE_UACCESS_H */
+
diff --git a/arch/score/include/asm/ucontext.h b/arch/score/include/asm/ucontext.h
new file mode 100644
index 000000000000..9bc07b9f30fb
--- /dev/null
+++ b/arch/score/include/asm/ucontext.h
@@ -0,0 +1 @@
+#include <asm-generic/ucontext.h>
diff --git a/arch/score/include/asm/unaligned.h b/arch/score/include/asm/unaligned.h
new file mode 100644
index 000000000000..2fc06de51c62
--- /dev/null
+++ b/arch/score/include/asm/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_UNALIGNED_H
+#define _ASM_SCORE_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_SCORE_UNALIGNED_H */
diff --git a/arch/score/include/asm/unistd.h b/arch/score/include/asm/unistd.h
new file mode 100644
index 000000000000..4aa957364d4d
--- /dev/null
+++ b/arch/score/include/asm/unistd.h
@@ -0,0 +1,13 @@
+#if !defined(_ASM_SCORE_UNISTD_H) || defined(__SYSCALL)
+#define _ASM_SCORE_UNISTD_H
+
+#define __ARCH_HAVE_MMU
+
+#define __ARCH_WANT_SYSCALL_NO_AT
+#define __ARCH_WANT_SYSCALL_NO_FLAGS
+#define __ARCH_WANT_SYSCALL_OFF_T
+#define __ARCH_WANT_SYSCALL_DEPRECATED
+
+#include <asm-generic/unistd.h>
+
+#endif /* _ASM_SCORE_UNISTD_H */
diff --git a/arch/score/include/asm/user.h b/arch/score/include/asm/user.h
new file mode 100644
index 000000000000..7bfb8e2c8054
--- /dev/null
+++ b/arch/score/include/asm/user.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SCORE_USER_H
+#define _ASM_SCORE_USER_H
+
+struct user_regs_struct {
+	unsigned long regs[32];
+
+	unsigned long cel;
+	unsigned long ceh;
+
+	unsigned long sr0;	/* cnt */
+	unsigned long sr1;	/* lcr */
+	unsigned long sr2;	/* scr */
+
+	unsigned long cp0_epc;
+	unsigned long cp0_ema;
+	unsigned long cp0_psr;
+	unsigned long cp0_ecr;
+	unsigned long cp0_condition;
+};
+
+#endif /* _ASM_SCORE_USER_H */
diff --git a/arch/score/kernel/Makefile b/arch/score/kernel/Makefile
new file mode 100644
index 000000000000..f218673b5d3d
--- /dev/null
+++ b/arch/score/kernel/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Linux/SCORE kernel.
+#
+
+extra-y	:= head.o vmlinux.lds
+
+obj-y += entry.o init_task.o irq.o process.o ptrace.o \
+	setup.o signal.o sys_score.o time.o traps.o \
+	sys_call_table.o
+
+obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/score/kernel/asm-offsets.c b/arch/score/kernel/asm-offsets.c
new file mode 100644
index 000000000000..57788f44c6fb
--- /dev/null
+++ b/arch/score/kernel/asm-offsets.c
@@ -0,0 +1,216 @@
+/*
+ * arch/score/kernel/asm-offsets.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kbuild.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <asm-generic/cmpxchg-local.h>
+
+void output_ptreg_defines(void)
+{
+	COMMENT("SCORE pt_regs offsets.");
+	OFFSET(PT_R0, pt_regs, regs[0]);
+	OFFSET(PT_R1, pt_regs, regs[1]);
+	OFFSET(PT_R2, pt_regs, regs[2]);
+	OFFSET(PT_R3, pt_regs, regs[3]);
+	OFFSET(PT_R4, pt_regs, regs[4]);
+	OFFSET(PT_R5, pt_regs, regs[5]);
+	OFFSET(PT_R6, pt_regs, regs[6]);
+	OFFSET(PT_R7, pt_regs, regs[7]);
+	OFFSET(PT_R8, pt_regs, regs[8]);
+	OFFSET(PT_R9, pt_regs, regs[9]);
+	OFFSET(PT_R10, pt_regs, regs[10]);
+	OFFSET(PT_R11, pt_regs, regs[11]);
+	OFFSET(PT_R12, pt_regs, regs[12]);
+	OFFSET(PT_R13, pt_regs, regs[13]);
+	OFFSET(PT_R14, pt_regs, regs[14]);
+	OFFSET(PT_R15, pt_regs, regs[15]);
+	OFFSET(PT_R16, pt_regs, regs[16]);
+	OFFSET(PT_R17, pt_regs, regs[17]);
+	OFFSET(PT_R18, pt_regs, regs[18]);
+	OFFSET(PT_R19, pt_regs, regs[19]);
+	OFFSET(PT_R20, pt_regs, regs[20]);
+	OFFSET(PT_R21, pt_regs, regs[21]);
+	OFFSET(PT_R22, pt_regs, regs[22]);
+	OFFSET(PT_R23, pt_regs, regs[23]);
+	OFFSET(PT_R24, pt_regs, regs[24]);
+	OFFSET(PT_R25, pt_regs, regs[25]);
+	OFFSET(PT_R26, pt_regs, regs[26]);
+	OFFSET(PT_R27, pt_regs, regs[27]);
+	OFFSET(PT_R28, pt_regs, regs[28]);
+	OFFSET(PT_R29, pt_regs, regs[29]);
+	OFFSET(PT_R30, pt_regs, regs[30]);
+	OFFSET(PT_R31, pt_regs, regs[31]);
+
+	OFFSET(PT_ORIG_R4, pt_regs, orig_r4);
+	OFFSET(PT_ORIG_R7, pt_regs, orig_r7);
+	OFFSET(PT_CEL, pt_regs, cel);
+	OFFSET(PT_CEH, pt_regs, ceh);
+	OFFSET(PT_SR0, pt_regs, sr0);
+	OFFSET(PT_SR1, pt_regs, sr1);
+	OFFSET(PT_SR2, pt_regs, sr2);
+	OFFSET(PT_EPC, pt_regs, cp0_epc);
+	OFFSET(PT_EMA, pt_regs, cp0_ema);
+	OFFSET(PT_PSR, pt_regs, cp0_psr);
+	OFFSET(PT_ECR, pt_regs, cp0_ecr);
+	OFFSET(PT_CONDITION, pt_regs, cp0_condition);
+	OFFSET(PT_IS_SYSCALL, pt_regs, is_syscall);
+
+	DEFINE(PT_SIZE, sizeof(struct pt_regs));
+	BLANK();
+}
+
+void output_task_defines(void)
+{
+	COMMENT("SCORE task_struct offsets.");
+	OFFSET(TASK_STATE, task_struct, state);
+	OFFSET(TASK_THREAD_INFO, task_struct, stack);
+	OFFSET(TASK_FLAGS, task_struct, flags);
+	OFFSET(TASK_MM, task_struct, mm);
+	OFFSET(TASK_PID, task_struct, pid);
+	DEFINE(TASK_STRUCT_SIZE, sizeof(struct task_struct));
+	BLANK();
+}
+
+void output_thread_info_defines(void)
+{
+	COMMENT("SCORE thread_info offsets.");
+	OFFSET(TI_TASK, thread_info, task);
+	OFFSET(TI_EXEC_DOMAIN, thread_info, exec_domain);
+	OFFSET(TI_FLAGS, thread_info, flags);
+	OFFSET(TI_TP_VALUE, thread_info, tp_value);
+	OFFSET(TI_CPU, thread_info, cpu);
+	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
+	OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit);
+	OFFSET(TI_RESTART_BLOCK, thread_info, restart_block);
+	OFFSET(TI_REGS, thread_info, regs);
+	DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
+	DEFINE(KERNEL_STACK_MASK, THREAD_MASK);
+	BLANK();
+}
+
+void output_thread_defines(void)
+{
+	COMMENT("SCORE specific thread_struct offsets.");
+	OFFSET(THREAD_REG0, task_struct, thread.reg0);
+	OFFSET(THREAD_REG2, task_struct, thread.reg2);
+	OFFSET(THREAD_REG3, task_struct, thread.reg3);
+	OFFSET(THREAD_REG12, task_struct, thread.reg12);
+	OFFSET(THREAD_REG13, task_struct, thread.reg13);
+	OFFSET(THREAD_REG14, task_struct, thread.reg14);
+	OFFSET(THREAD_REG15, task_struct, thread.reg15);
+	OFFSET(THREAD_REG16, task_struct, thread.reg16);
+	OFFSET(THREAD_REG17, task_struct, thread.reg17);
+	OFFSET(THREAD_REG18, task_struct, thread.reg18);
+	OFFSET(THREAD_REG19, task_struct, thread.reg19);
+	OFFSET(THREAD_REG20, task_struct, thread.reg20);
+	OFFSET(THREAD_REG21, task_struct, thread.reg21);
+	OFFSET(THREAD_REG29, task_struct, thread.reg29);
+
+	OFFSET(THREAD_PSR, task_struct, thread.cp0_psr);
+	OFFSET(THREAD_EMA, task_struct, thread.cp0_ema);
+	OFFSET(THREAD_BADUADDR, task_struct, thread.cp0_baduaddr);
+	OFFSET(THREAD_ECODE, task_struct, thread.error_code);
+	OFFSET(THREAD_TRAPNO, task_struct, thread.trap_no);
+	BLANK();
+}
+
+void output_mm_defines(void)
+{
+	COMMENT("Size of struct page");
+	DEFINE(STRUCT_PAGE_SIZE, sizeof(struct page));
+	BLANK();
+	COMMENT("Linux mm_struct offsets.");
+	OFFSET(MM_USERS, mm_struct, mm_users);
+	OFFSET(MM_PGD, mm_struct, pgd);
+	OFFSET(MM_CONTEXT, mm_struct, context);
+	BLANK();
+	DEFINE(_PAGE_SIZE, PAGE_SIZE);
+	DEFINE(_PAGE_SHIFT, PAGE_SHIFT);
+	BLANK();
+	DEFINE(_PGD_T_SIZE, sizeof(pgd_t));
+	DEFINE(_PTE_T_SIZE, sizeof(pte_t));
+	BLANK();
+	DEFINE(_PGD_ORDER, PGD_ORDER);
+	DEFINE(_PTE_ORDER, PTE_ORDER);
+	BLANK();
+	DEFINE(_PGDIR_SHIFT, PGDIR_SHIFT);
+	BLANK();
+	DEFINE(_PTRS_PER_PGD, PTRS_PER_PGD);
+	DEFINE(_PTRS_PER_PTE, PTRS_PER_PTE);
+	BLANK();
+}
+
+void output_sc_defines(void)
+{
+	COMMENT("Linux sigcontext offsets.");
+	OFFSET(SC_REGS, sigcontext, sc_regs);
+	OFFSET(SC_MDCEH, sigcontext, sc_mdceh);
+	OFFSET(SC_MDCEL, sigcontext, sc_mdcel);
+	OFFSET(SC_PC, sigcontext, sc_pc);
+	OFFSET(SC_PSR, sigcontext, sc_psr);
+	OFFSET(SC_ECR, sigcontext, sc_ecr);
+	OFFSET(SC_EMA, sigcontext, sc_ema);
+	BLANK();
+}
+
+void output_signal_defined(void)
+{
+	COMMENT("Linux signal numbers.");
+	DEFINE(_SIGHUP, SIGHUP);
+	DEFINE(_SIGINT, SIGINT);
+	DEFINE(_SIGQUIT, SIGQUIT);
+	DEFINE(_SIGILL, SIGILL);
+	DEFINE(_SIGTRAP, SIGTRAP);
+	DEFINE(_SIGIOT, SIGIOT);
+	DEFINE(_SIGABRT, SIGABRT);
+	DEFINE(_SIGFPE, SIGFPE);
+	DEFINE(_SIGKILL, SIGKILL);
+	DEFINE(_SIGBUS, SIGBUS);
+	DEFINE(_SIGSEGV, SIGSEGV);
+	DEFINE(_SIGSYS, SIGSYS);
+	DEFINE(_SIGPIPE, SIGPIPE);
+	DEFINE(_SIGALRM, SIGALRM);
+	DEFINE(_SIGTERM, SIGTERM);
+	DEFINE(_SIGUSR1, SIGUSR1);
+	DEFINE(_SIGUSR2, SIGUSR2);
+	DEFINE(_SIGCHLD, SIGCHLD);
+	DEFINE(_SIGPWR, SIGPWR);
+	DEFINE(_SIGWINCH, SIGWINCH);
+	DEFINE(_SIGURG, SIGURG);
+	DEFINE(_SIGIO, SIGIO);
+	DEFINE(_SIGSTOP, SIGSTOP);
+	DEFINE(_SIGTSTP, SIGTSTP);
+	DEFINE(_SIGCONT, SIGCONT);
+	DEFINE(_SIGTTIN, SIGTTIN);
+	DEFINE(_SIGTTOU, SIGTTOU);
+	DEFINE(_SIGVTALRM, SIGVTALRM);
+	DEFINE(_SIGPROF, SIGPROF);
+	DEFINE(_SIGXCPU, SIGXCPU);
+	DEFINE(_SIGXFSZ, SIGXFSZ);
+	BLANK();
+}
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
new file mode 100644
index 000000000000..577abba3fac6
--- /dev/null
+++ b/arch/score/kernel/entry.S
@@ -0,0 +1,514 @@
+/*
+ * arch/score/kernel/entry.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/asmmacro.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+
+/*
+ * disable interrupts.
+ */
+.macro	disable_irq
+	mfcr	r8, cr0
+	srli	r8, r8, 1
+	slli	r8, r8, 1
+	mtcr	r8, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/*
+ * enable interrupts.
+ */
+.macro	enable_irq
+	mfcr	r8, cr0
+	ori	r8, 1
+	mtcr	r8, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+__INIT
+ENTRY(debug_exception_vector)
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+
+ENTRY(general_exception_vector)			# should move to addr 0x200
+	j	general_exception
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+
+ENTRY(interrupt_exception_vector)		# should move to addr 0x210
+	j	interrupt_exception
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+
+	.section ".text", "ax"
+	.align	2;
+general_exception:
+	mfcr	r31, cr2
+	nop
+	la	r30, exception_handlers
+	andi	r31, 0x1f			# get ecr.exc_code
+	slli	r31, r31, 2
+	add	r30, r30, r31
+	lw	r30, [r30]
+	br	r30
+
+interrupt_exception:
+	SAVE_ALL
+	mfcr	r4, cr2
+	nop
+	lw	r16, [r28, TI_REGS]
+	sw	r0, [r28, TI_REGS]
+	la	r3, ret_from_irq
+	srli	r4, r4, 18			# get ecr.ip[7:2], interrupt No.
+	mv	r5, r0
+	j	do_IRQ
+
+ENTRY(handle_nmi)				# NMI #1
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, nmi_exception_handler
+	brl	r8
+	j	restore_all
+
+ENTRY(handle_adelinsn)				# AdEL-instruction #2
+	SAVE_ALL
+	mfcr	r8, cr6
+	nop
+	nop
+	sw	r8, [r0, PT_EMA]
+	mv	r4, r0
+	la	r8, do_adelinsn
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_ibe)				# BusEL-instruction #5
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_be
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_pel)				# P-EL #6
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_pel
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_ccu)				# CCU #8
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_ccu
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_ri)				# RI #9
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_ri
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_tr)				# Trap #10
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_tr
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_adedata)				# AdES-instruction #12
+	SAVE_ALL
+	mfcr	r8, cr6
+	nop
+	nop
+	sw	r8, [r0, PT_EMA]
+	mv	r4, r0
+	la	r8, do_adedata
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_cee)				# CeE #16
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_cee
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_cpe)				# CpE #17
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_cpe
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_dbe)				# BusEL-data #18
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_be
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_reserved)				# others
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_reserved
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+#ifndef CONFIG_PREEMPT
+#define resume_kernel	restore_all
+#else
+#define __ret_from_irq	ret_from_exception
+#endif
+
+	.align	2
+#ifndef CONFIG_PREEMPT
+ENTRY(ret_from_exception)
+	disable_irq			# preempt stop
+	nop
+	j	__ret_from_irq
+	nop
+#endif
+
+ENTRY(ret_from_irq)
+	sw	r16, [r28, TI_REGS]
+
+ENTRY(__ret_from_irq)
+	lw	r8, [r0, PT_PSR]	# returning to kernel mode?
+	andri.c	r8, r8, KU_USER
+	beq	resume_kernel
+
+resume_userspace:
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]	# current->work
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r8, r6		# ignoring syscall_trace
+	bne	work_pending
+	nop
+	j	restore_all
+	nop
+
+#ifdef CONFIG_PREEMPT
+resume_kernel:
+	disable_irq
+	lw	r8, [r28, TI_PRE_COUNT]
+	cmpz.c	r8
+	bne	r8, restore_all
+need_resched:
+	lw	r8, [r28, TI_FLAGS]
+	andri.c	r9, r8, _TIF_NEED_RESCHED
+	beq	restore_all
+	lw	r8, [r28, PT_PSR]		# Interrupts off?
+	andri.c	r8, r8, 1
+	beq	restore_all
+	bl	preempt_schedule_irq
+	nop
+	j	need_resched
+	nop
+#endif
+
+ENTRY(ret_from_fork)
+	bl	schedule_tail			# r4=struct task_struct *prev
+
+ENTRY(syscall_exit)
+	nop
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]		# current->work
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r6, r8
+	bne	syscall_exit_work
+
+ENTRY(restore_all)					# restore full frame
+	RESTORE_ALL_AND_RET
+
+work_pending:
+	andri.c	r8, r6, _TIF_NEED_RESCHED # r6 is preloaded with TI_FLAGS
+	beq	work_notifysig
+work_resched:
+	bl	schedule
+	nop
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r6, r8	# is there any work to be done
+				# other than syscall tracing?
+	beq	restore_all
+	andri.c	r8, r6, _TIF_NEED_RESCHED
+	bne	work_resched
+
+work_notifysig:
+	mv	r4, r0
+	li	r5, 0
+	bl	do_notify_resume	# r6 already loaded
+	nop
+	j	resume_userspace
+	nop
+
+ENTRY(syscall_exit_work)
+	li	r8, _TIF_SYSCALL_TRACE
+	and.c	r8, r8, r6		# r6 is preloaded with TI_FLAGS
+	beq	work_pending		# trace bit set?
+	nop
+	enable_irq
+	mv	r4, r0
+	li	r5, 1
+	bl	do_syscall_trace
+	nop
+	b	resume_userspace
+	nop
+
+.macro	save_context	reg
+	sw	r12, [\reg, THREAD_REG12];
+	sw	r13, [\reg, THREAD_REG13];
+	sw	r14, [\reg, THREAD_REG14];
+	sw	r15, [\reg, THREAD_REG15];
+	sw	r16, [\reg, THREAD_REG16];
+	sw	r17, [\reg, THREAD_REG17];
+	sw	r18, [\reg, THREAD_REG18];
+	sw	r19, [\reg, THREAD_REG19];
+	sw	r20, [\reg, THREAD_REG20];
+	sw	r21, [\reg, THREAD_REG21];
+	sw	r29, [\reg, THREAD_REG29];
+	sw	r2, [\reg, THREAD_REG2];
+	sw	r0, [\reg, THREAD_REG0]
+.endm
+
+.macro	restore_context	reg
+	lw	r12, [\reg, THREAD_REG12];
+	lw	r13, [\reg, THREAD_REG13];
+	lw	r14, [\reg, THREAD_REG14];
+	lw	r15, [\reg, THREAD_REG15];
+	lw	r16, [\reg, THREAD_REG16];
+	lw	r17, [\reg, THREAD_REG17];
+	lw	r18, [\reg, THREAD_REG18];
+	lw	r19, [\reg, THREAD_REG19];
+	lw	r20, [\reg, THREAD_REG20];
+	lw	r21, [\reg, THREAD_REG21];
+	lw	r29, [\reg, THREAD_REG29];
+	lw	r0, [\reg, THREAD_REG0];
+	lw	r2, [\reg, THREAD_REG2];
+	lw	r3, [\reg, THREAD_REG3]
+.endm
+
+/*
+ * task_struct *resume(task_struct *prev, task_struct *next,
+ *			struct thread_info *next_ti)
+ */
+ENTRY(resume)
+	mfcr	r9, cr0
+	nop
+	nop
+	sw	r9, [r4, THREAD_PSR]
+	save_context	r4
+	sw	r3, [r4, THREAD_REG3]
+
+	mv	r28, r6
+	restore_context	r5
+	mv	r8, r6
+	addi	r8, KERNEL_STACK_SIZE
+	subi	r8, 32
+	la 	r9, kernelsp;
+	sw 	r8, [r9];
+
+	mfcr	r9, cr0
+	ldis	r7, 0x00ff
+	nop
+	and	r9, r9, r7
+	lw	r6, [r5, THREAD_PSR]
+	not	r7, r7
+	and	r6, r6, r7
+	or	r6, r6, r9
+	mtcr	r6, cr0
+	nop; nop; nop; nop; nop
+	br	r3
+
+ENTRY(handle_sys)
+	SAVE_ALL
+	sw	r8, [r0, 16]		# argument 5 from user r8
+	sw	r9, [r0, 20]		# argument 6 from user r9
+	enable_irq
+
+	sw	r4, [r0, PT_ORIG_R4]	#for restart syscall
+	sw	r7, [r0, PT_ORIG_R7]	#for restart syscall
+	sw	r27, [r0, PT_IS_SYSCALL] # it from syscall
+
+	lw	r9, [r0, PT_EPC]	# skip syscall on return
+	addi	r9, 4
+	sw	r9, [r0, PT_EPC]
+
+	cmpi.c	r27, __NR_syscalls 	# check syscall number
+	bgtu	illegal_syscall
+
+	slli	r8, r27, 2		# get syscall routine
+	la	r11, sys_call_table
+	add	r11, r11, r8
+	lw	r10, [r11]		# get syscall entry
+
+	cmpz.c	r10
+	beq	illegal_syscall
+
+	lw	r8, [r28, TI_FLAGS]
+	li	r9, _TIF_SYSCALL_TRACE
+	and.c	r8, r8, r9
+	bne	syscall_trace_entry
+
+	brl	r10			# Do The Real system call
+
+	cmpi.c	r4, 0
+	blt	1f
+	ldi	r8, 0
+	sw	r8, [r0, PT_R7]
+	b 2f
+1:
+	cmpi.c	r4, -MAX_ERRNO - 1
+	ble	2f
+	ldi	r8, 0x1;
+	sw	r8, [r0, PT_R7]
+	neg	r4, r4
+2:
+	sw	r4, [r0, PT_R4]		# save result
+
+syscall_return:
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]	# current->work
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r6, r8
+	bne	syscall_return_work
+	j	restore_all
+
+syscall_return_work:
+	j	syscall_exit_work
+
+syscall_trace_entry:
+	mv	r16, r10
+	mv	r4, r0
+	li	r5, 0
+	bl	do_syscall_trace
+
+	mv	r8, r16
+	lw	r4, [r0, PT_R4]		# Restore argument registers
+	lw	r5, [r0, PT_R5]
+	lw	r6, [r0, PT_R6]
+	lw	r7, [r0, PT_R7]
+	brl	r8
+
+	li	r8, -MAX_ERRNO - 1
+	sw	r8, [r0, PT_R7]		# set error flag
+
+	neg	r4, r4			# error
+	sw	r4, [r0, PT_R0]		# set flag for syscall
+					# restarting
+1:	sw	r4, [r0, PT_R2]		# result
+	j	syscall_exit
+
+illegal_syscall:
+	ldi	r4, -ENOSYS		# error
+	sw	r4, [r0, PT_ORIG_R4]
+	sw	r4, [r0, PT_R4]
+	ldi	r9, 1			# set error flag
+	sw	r9, [r0, PT_R7]
+	j	syscall_return
+
+ENTRY(sys_execve)
+	mv	r4, r0
+	la	r8, score_execve
+	br	r8
+
+ENTRY(sys_clone)
+	mv	r4, r0
+	la	r8, score_clone
+	br	r8
+
+ENTRY(sys_rt_sigreturn)
+	mv	r4, r0
+	la	r8, score_rt_sigreturn
+	br	r8
+
+ENTRY(sys_sigaltstack)
+	mv	r4, r0
+	la	r8, score_sigaltstack
+	br	r8
+
+#ifdef __ARCH_WANT_SYSCALL_DEPRECATED
+ENTRY(sys_fork)
+	mv	r4, r0
+	la	r8, score_fork
+	br	r8
+
+ENTRY(sys_vfork)
+	mv	r4, r0
+	la	r8, score_vfork
+	br	r8
+#endif /* __ARCH_WANT_SYSCALL_DEPRECATED */
+
diff --git a/arch/score/kernel/head.S b/arch/score/kernel/head.S
new file mode 100644
index 000000000000..22a7e3c7292b
--- /dev/null
+++ b/arch/score/kernel/head.S
@@ -0,0 +1,70 @@
+/*
+ * arch/score/kernel/head.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+
+	.extern start_kernel
+	.global init_thread_union
+	.global	kernelsp
+
+__INIT
+ENTRY(_stext)
+	la	r30, __bss_start	/* initialize BSS segment. */
+	la	r31, _end
+	xor	r8, r8, r8
+
+1:	cmp.c	r31, r30
+	beq	2f
+
+	sw	r8, [r30]		/* clean memory. */
+	addi	r30, 4
+	b	1b
+
+2:	la	r28, init_thread_union	/* set kernel stack. */
+	mv	r0, r28
+	addi	r0, KERNEL_STACK_SIZE - 32
+	la	r30, kernelsp
+	sw	r0, [r30]
+	subi	r0, 4*4
+	xor	r30, r30, r30
+	ori	r30, 0x02		/* enable MMU. */
+	mtcr	r30, cr4
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* there is no parameter */
+	xor	r4, r4, r4
+	xor	r5, r5, r5
+	xor	r6, r6, r6
+	xor	r7, r7, r7
+	la	r30, start_kernel	/* jump to init_arch */
+	br	r30
diff --git a/arch/score/kernel/init_task.c b/arch/score/kernel/init_task.c
new file mode 100644
index 000000000000..ff952f6c63fd
--- /dev/null
+++ b/arch/score/kernel/init_task.c
@@ -0,0 +1,47 @@
+/*
+ * arch/score/kernel/init_task.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+	__attribute__((__section__(".data.init_task"), __aligned__(THREAD_SIZE))) =
+		{ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/score/kernel/irq.c b/arch/score/kernel/irq.c
new file mode 100644
index 000000000000..47647dde09ca
--- /dev/null
+++ b/arch/score/kernel/irq.c
@@ -0,0 +1,148 @@
+/*
+ * arch/score/kernel/irq.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+
+#include <asm/io.h>
+
+/* the interrupt controller is hardcoded at this address */
+#define SCORE_PIC		((u32 __iomem __force *)0x95F50000)
+
+#define INT_PNDL		0
+#define INT_PNDH		1
+#define INT_PRIORITY_M		2
+#define INT_PRIORITY_SG0	4
+#define INT_PRIORITY_SG1	5
+#define INT_PRIORITY_SG2	6
+#define INT_PRIORITY_SG3	7
+#define INT_MASKL		8
+#define INT_MASKH		9
+
+/*
+ * handles all normal device IRQs
+ */
+asmlinkage void do_IRQ(int irq)
+{
+	irq_enter();
+	generic_handle_irq(irq);
+	irq_exit();
+}
+
+static void score_mask(unsigned int irq_nr)
+{
+	unsigned int irq_source = 63 - irq_nr;
+
+	if (irq_source < 32)
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKL) | \
+			(1 << irq_source)), SCORE_PIC + INT_MASKL);
+	else
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKH) | \
+			(1 << (irq_source - 32))), SCORE_PIC + INT_MASKH);
+}
+
+static void score_unmask(unsigned int irq_nr)
+{
+	unsigned int irq_source = 63 - irq_nr;
+
+	if (irq_source < 32)
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKL) & \
+			~(1 << irq_source)), SCORE_PIC + INT_MASKL);
+	else
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKH) & \
+			~(1 << (irq_source - 32))), SCORE_PIC + INT_MASKH);
+}
+
+struct irq_chip score_irq_chip = {
+	.name		= "Score7-level",
+	.mask		= score_mask,
+	.mask_ack	= score_mask,
+	.unmask		= score_unmask,
+};
+
+/*
+ * initialise the interrupt system
+ */
+void __init init_IRQ(void)
+{
+	int index;
+	unsigned long target_addr;
+
+	for (index = 0; index < NR_IRQS; ++index)
+		set_irq_chip_and_handler(index, &score_irq_chip,
+					 handle_level_irq);
+
+	for (target_addr = IRQ_VECTOR_BASE_ADDR;
+		target_addr <= IRQ_VECTOR_END_ADDR;
+		target_addr += IRQ_VECTOR_SIZE)
+		memcpy((void *)target_addr, \
+			interrupt_exception_vector, IRQ_VECTOR_SIZE);
+
+	__raw_writel(0xffffffff, SCORE_PIC + INT_MASKL);
+	__raw_writel(0xffffffff, SCORE_PIC + INT_MASKH);
+
+	__asm__ __volatile__(
+		"mtcr	%0, cr3\n\t"
+		: : "r" (EXCEPTION_VECTOR_BASE_ADDR | \
+			VECTOR_ADDRESS_OFFSET_MODE16));
+}
+
+/*
+ * Generic, controller-independent functions:
+ */
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *)v, cpu;
+	struct irqaction *action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_puts(p, "           ");
+		for_each_online_cpu(cpu)
+			seq_printf(p, "CPU%d       ", cpu);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if (!action)
+			goto unlock;
+
+		seq_printf(p, "%3d: ", i);
+		seq_printf(p, "%10u ", kstat_irqs(i));
+		seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-");
+		seq_printf(p, "  %s", action->name);
+		for (action = action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+
+		seq_putc(p, '\n');
+unlock:
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	}
+
+	return 0;
+}
diff --git a/arch/score/kernel/module.c b/arch/score/kernel/module.c
new file mode 100644
index 000000000000..4de8d47becd3
--- /dev/null
+++ b/arch/score/kernel/module.c
@@ -0,0 +1,165 @@
+/*
+ * arch/score/kernel/module.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+
+void *module_alloc(unsigned long size)
+{
+	return size ? vmalloc(size) : NULL;
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			char *secstrings, struct module *mod)
+{
+	return 0;
+}
+
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+		unsigned int symindex, unsigned int relindex,
+		struct module *me)
+{
+	Elf32_Shdr *symsec = sechdrs + symindex;
+	Elf32_Shdr *relsec = sechdrs + relindex;
+	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
+	Elf32_Rel *rel = (void *)relsec->sh_addr;
+	unsigned int i;
+
+	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
+		unsigned long loc;
+		Elf32_Sym *sym;
+		s32 r_offset;
+
+		r_offset = ELF32_R_SYM(rel->r_info);
+		if ((r_offset < 0) ||
+		    (r_offset > (symsec->sh_size / sizeof(Elf32_Sym)))) {
+			printk(KERN_ERR "%s: bad relocation, section %d reloc %d\n",
+				me->name, relindex, i);
+				return -ENOEXEC;
+		}
+
+		sym = ((Elf32_Sym *)symsec->sh_addr) + r_offset;
+
+		if ((rel->r_offset < 0) ||
+		    (rel->r_offset > dstsec->sh_size - sizeof(u32))) {
+			printk(KERN_ERR "%s: out of bounds relocation, "
+				"section %d reloc %d offset %d size %d\n",
+				me->name, relindex, i, rel->r_offset,
+				dstsec->sh_size);
+			return -ENOEXEC;
+		}
+
+		loc = dstsec->sh_addr + rel->r_offset;
+		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_SCORE_NONE:
+			break;
+		case R_SCORE_ABS32:
+			*(unsigned long *)loc += sym->st_value;
+			break;
+		case R_SCORE_HI16:
+			break;
+		case R_SCORE_LO16: {
+			unsigned long hi16_offset, offset;
+			unsigned long uvalue;
+			unsigned long temp, temp_hi;
+			temp_hi = *((unsigned long *)loc - 1);
+			temp = *(unsigned long *)loc;
+
+			hi16_offset = (((((temp_hi) >> 16) & 0x3) << 15) |
+					((temp_hi) & 0x7fff)) >> 1;
+			offset = ((temp >> 16 & 0x03) << 15) |
+					((temp & 0x7fff) >> 1);
+			offset = (hi16_offset << 16) | (offset & 0xffff);
+			uvalue = sym->st_value + offset;
+			hi16_offset = (uvalue >> 16) << 1;
+
+			temp_hi = ((temp_hi) & (~(0x37fff))) |
+					(hi16_offset & 0x7fff) |
+					((hi16_offset << 1) & 0x30000);
+			*((unsigned long *)loc - 1) = temp_hi;
+
+			offset = (uvalue & 0xffff) << 1;
+			temp = (temp & (~(0x37fff))) | (offset & 0x7fff) |
+				((offset << 1) & 0x30000);
+			*(unsigned long *)loc = temp;
+			break;
+		}
+		case R_SCORE_24: {
+			unsigned long hi16_offset, offset;
+			unsigned long uvalue;
+			unsigned long temp;
+
+			temp = *(unsigned long *)loc;
+			offset = (temp & 0x03FF7FFE);
+			hi16_offset = (offset & 0xFFFF0000);
+			offset = (hi16_offset | ((offset & 0xFFFF) << 1)) >> 2;
+
+			uvalue = (sym->st_value + offset) >> 1;
+			uvalue = uvalue & 0x00ffffff;
+
+			temp = (temp & 0xfc008001) |
+				((uvalue << 2) & 0x3ff0000) |
+				((uvalue & 0x3fff) << 1);
+			*(unsigned long *)loc = temp;
+			break;
+		}
+		default:
+			printk(KERN_ERR "%s: unknown relocation: %u\n",
+				me->name, ELF32_R_TYPE(rel->r_info));
+			return -ENOEXEC;
+		}
+	}
+
+	return 0;
+}
+
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+		unsigned int symindex, unsigned int relsec,
+		struct module *me)
+{
+	return 0;
+}
+
+/* Given an address, look for it in the module exception tables. */
+const struct exception_table_entry *search_module_dbetables(unsigned long addr)
+{
+	return NULL;
+}
+
+/* Put in dbe list if necessary. */
+int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+		struct module *me)
+{
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod) {}
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
new file mode 100644
index 000000000000..25d08030a883
--- /dev/null
+++ b/arch/score/kernel/process.c
@@ -0,0 +1,168 @@
+/*
+ * arch/score/kernel/process.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/elfcore.h>
+#include <linux/pm.h>
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/* If or when software machine-restart is implemented, add code here. */
+void machine_restart(char *command) {}
+
+/* If or when software machine-halt is implemented, add code here. */
+void machine_halt(void) {}
+
+/* If or when software machine-power-off is implemented, add code here. */
+void machine_power_off(void) {}
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void __noreturn cpu_idle(void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		while (!need_resched())
+			barrier();
+
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
+}
+
+void ret_from_fork(void);
+
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
+{
+	unsigned long status;
+
+	/* New thread loses kernel privileges. */
+	status = regs->cp0_psr & ~(KU_MASK);
+	status |= KU_USER;
+	regs->cp0_psr = status;
+	regs->cp0_epc = pc;
+	regs->regs[0] = sp;
+}
+
+void exit_thread(void) {}
+
+/*
+ * When a process does an "exec", machine state like FPU and debug
+ * registers need to be reset.  This is a hook function for that.
+ * Currently we don't have any such state to reset, so this is empty.
+ */
+void flush_thread(void) {}
+
+/*
+ * set up the kernel stack and exception frames for a new process
+ */
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long unused,
+		struct task_struct *p, struct pt_regs *regs)
+{
+	struct thread_info *ti = task_thread_info(p);
+	struct pt_regs *childregs = task_pt_regs(p);
+
+	p->set_child_tid = NULL;
+	p->clear_child_tid = NULL;
+
+	*childregs = *regs;
+	childregs->regs[7] = 0;		/* Clear error flag */
+	childregs->regs[4] = 0;		/* Child gets zero as return value */
+	regs->regs[4] = p->pid;
+
+	if (childregs->cp0_psr & 0x8) {	/* test kernel fork or user fork */
+		childregs->regs[0] = usp;		/* user fork */
+	} else {
+		childregs->regs[28] = (unsigned long) ti; /* kernel fork */
+		childregs->regs[0] = (unsigned long) childregs;
+	}
+
+	p->thread.reg0 = (unsigned long) childregs;
+	p->thread.reg3 = (unsigned long) ret_from_fork;
+	p->thread.cp0_psr = 0;
+
+	return 0;
+}
+
+/* Fill in the fpu structure for a core dump. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r)
+{
+	return 1;
+}
+
+static void __noreturn
+kernel_thread_helper(void *unused0, int (*fn)(void *),
+		 void *arg, void *unused1)
+{
+	do_exit(fn(arg));
+}
+
+/*
+ * Create a kernel thread.
+ */
+long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+
+	regs.regs[6] = (unsigned long) arg;
+	regs.regs[5] = (unsigned long) fn;
+	regs.cp0_epc = (unsigned long) kernel_thread_helper;
+	regs.cp0_psr = (regs.cp0_psr & ~(0x1|0x4|0x8)) | \
+			((regs.cp0_psr & 0x3) << 2);
+
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, \
+			0, &regs, 0, NULL, NULL);
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	return task_pt_regs(tsk)->cp0_epc;
+}
+
+unsigned long get_wchan(struct task_struct *task)
+{
+	if (!task || task == current || task->state == TASK_RUNNING)
+		return 0;
+
+	if (!task_stack_page(task))
+		return 0;
+
+	return task_pt_regs(task)->cp0_epc;
+}
+
+unsigned long arch_align_stack(unsigned long sp)
+{
+	return sp;
+}
diff --git a/arch/score/kernel/ptrace.c b/arch/score/kernel/ptrace.c
new file mode 100644
index 000000000000..174c6422b096
--- /dev/null
+++ b/arch/score/kernel/ptrace.c
@@ -0,0 +1,382 @@
+/*
+ * arch/score/kernel/ptrace.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/elf.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * retrieve the contents of SCORE userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* skip 9 * sizeof(unsigned long) not use for pt_regs */
+	ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					0, offsetof(struct pt_regs, regs));
+
+	/* r0 - r31, cel, ceh, sr0, sr1, sr2, epc, ema, psr, ecr, condition */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs->regs,
+				  offsetof(struct pt_regs, regs),
+				  offsetof(struct pt_regs, cp0_condition));
+
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+/*
+ * update the contents of the SCORE userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* skip 9 * sizeof(unsigned long) */
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					0, offsetof(struct pt_regs, regs));
+
+	/* r0 - r31, cel, ceh, sr0, sr1, sr2, epc, ema, psr, ecr, condition */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  regs->regs,
+				  offsetof(struct pt_regs, regs),
+				  offsetof(struct pt_regs, cp0_condition));
+
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+/*
+ * Define the register sets available on the score7 under Linux
+ */
+enum score7_regset {
+	REGSET_GENERAL,
+};
+
+static const struct user_regset score7_regsets[] = {
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+};
+
+static const struct user_regset_view user_score_native_view = {
+	.name		= "score7",
+	.e_machine	= EM_SCORE7,
+	.regsets	= score7_regsets,
+	.n		= ARRAY_SIZE(score7_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_score_native_view;
+}
+
+static int is_16bitinsn(unsigned long insn)
+{
+	if ((insn & INSN32_MASK) == INSN32_MASK)
+		return 0;
+	else
+		return 1;
+}
+
+int
+read_tsk_long(struct task_struct *child,
+		unsigned long addr, unsigned long *res)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, res, sizeof(*res), 0);
+
+	return copied != sizeof(*res) ? -EIO : 0;
+}
+
+int
+read_tsk_short(struct task_struct *child,
+		unsigned long addr, unsigned short *res)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, res, sizeof(*res), 0);
+
+	return copied != sizeof(*res) ? -EIO : 0;
+}
+
+static int
+write_tsk_short(struct task_struct *child,
+		unsigned long addr, unsigned short val)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, &val, sizeof(val), 1);
+
+	return copied != sizeof(val) ? -EIO : 0;
+}
+
+static int
+write_tsk_long(struct task_struct *child,
+		unsigned long addr, unsigned long val)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, &val, sizeof(val), 1);
+
+	return copied != sizeof(val) ? -EIO : 0;
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	/* far_epc is the target of branch */
+	unsigned int epc, far_epc = 0;
+	unsigned long epc_insn, far_epc_insn;
+	int ninsn_type;			/* next insn type 0=16b, 1=32b */
+	unsigned int tmp, tmp2;
+	struct pt_regs *regs = task_pt_regs(child);
+	child->thread.single_step = 1;
+	child->thread.ss_nextcnt = 1;
+	epc = regs->cp0_epc;
+
+	read_tsk_long(child, epc, &epc_insn);
+
+	if (is_16bitinsn(epc_insn)) {
+		if ((epc_insn & J16M) == J16) {
+			tmp = epc_insn & 0xFFE;
+			epc = (epc & 0xFFFFF000) | tmp;
+		} else if ((epc_insn & B16M) == B16) {
+			child->thread.ss_nextcnt = 2;
+			tmp = (epc_insn & 0xFF) << 1;
+			tmp = tmp << 23;
+			tmp = (unsigned int)((int) tmp >> 23);
+			far_epc = epc + tmp;
+			epc += 2;
+		} else if ((epc_insn & BR16M) == BR16) {
+			child->thread.ss_nextcnt = 2;
+			tmp = (epc_insn >> 4) & 0xF;
+			far_epc = regs->regs[tmp];
+			epc += 2;
+		} else
+			epc += 2;
+	} else {
+		if ((epc_insn & J32M) == J32) {
+			tmp = epc_insn & 0x03FFFFFE;
+			tmp2 = tmp & 0x7FFF;
+			tmp = (((tmp >> 16) & 0x3FF) << 15) | tmp2;
+			epc = (epc & 0xFFC00000) | tmp;
+		} else if ((epc_insn & B32M) == B32) {
+			child->thread.ss_nextcnt = 2;
+			tmp = epc_insn & 0x03FFFFFE;	/* discard LK bit */
+			tmp2 = tmp & 0x3FF;
+			tmp = (((tmp >> 16) & 0x3FF) << 10) | tmp2; /* 20bit */
+			tmp = tmp << 12;
+			tmp = (unsigned int)((int) tmp >> 12);
+			far_epc = epc + tmp;
+			epc += 4;
+		} else if ((epc_insn & BR32M) == BR32) {
+			child->thread.ss_nextcnt = 2;
+			tmp = (epc_insn >> 16) & 0x1F;
+			far_epc = regs->regs[tmp];
+			epc += 4;
+		} else
+			epc += 4;
+	}
+
+	if (child->thread.ss_nextcnt == 1) {
+		read_tsk_long(child, epc, &epc_insn);
+
+		if (is_16bitinsn(epc_insn)) {
+			write_tsk_short(child, epc, SINGLESTEP16_INSN);
+			ninsn_type = 0;
+		} else {
+			write_tsk_long(child, epc, SINGLESTEP32_INSN);
+			ninsn_type = 1;
+		}
+
+		if (ninsn_type == 0) {  /* 16bits */
+			child->thread.insn1_type = 0;
+			child->thread.addr1 = epc;
+			 /* the insn may have 32bit data */
+			child->thread.insn1 = (short)epc_insn;
+		} else {
+			child->thread.insn1_type = 1;
+			child->thread.addr1 = epc;
+			child->thread.insn1 = epc_insn;
+		}
+	} else {
+		/* branch! have two target child->thread.ss_nextcnt=2 */
+		read_tsk_long(child, epc, &epc_insn);
+		read_tsk_long(child, far_epc, &far_epc_insn);
+		if (is_16bitinsn(epc_insn)) {
+			write_tsk_short(child, epc, SINGLESTEP16_INSN);
+			ninsn_type = 0;
+		} else {
+			write_tsk_long(child, epc, SINGLESTEP32_INSN);
+			ninsn_type = 1;
+		}
+
+		if (ninsn_type == 0) {  /* 16bits */
+			child->thread.insn1_type = 0;
+			child->thread.addr1 = epc;
+			 /* the insn may have 32bit data */
+			child->thread.insn1 = (short)epc_insn;
+		} else {
+			child->thread.insn1_type = 1;
+			child->thread.addr1 = epc;
+			child->thread.insn1 = epc_insn;
+		}
+
+		if (is_16bitinsn(far_epc_insn)) {
+			write_tsk_short(child, far_epc, SINGLESTEP16_INSN);
+			ninsn_type = 0;
+		} else {
+			write_tsk_long(child, far_epc, SINGLESTEP32_INSN);
+			ninsn_type = 1;
+		}
+
+		if (ninsn_type == 0) {  /* 16bits */
+			child->thread.insn2_type = 0;
+			child->thread.addr2 = far_epc;
+			 /* the insn may have 32bit data */
+			child->thread.insn2 = (short)far_epc_insn;
+		} else {
+			child->thread.insn2_type = 1;
+			child->thread.addr2 = far_epc;
+			child->thread.insn2 = far_epc_insn;
+		}
+	}
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	if (child->thread.insn1_type == 0)
+		write_tsk_short(child, child->thread.addr1,
+				child->thread.insn1);
+
+	if (child->thread.insn1_type == 1)
+		write_tsk_long(child, child->thread.addr1,
+				child->thread.insn1);
+
+	if (child->thread.ss_nextcnt == 2) {	/* branch */
+		if (child->thread.insn1_type == 0)
+			write_tsk_short(child, child->thread.addr1,
+					child->thread.insn1);
+		if (child->thread.insn1_type == 1)
+			write_tsk_long(child, child->thread.addr1,
+					child->thread.insn1);
+		if (child->thread.insn2_type == 0)
+			write_tsk_short(child, child->thread.addr2,
+					child->thread.insn2);
+		if (child->thread.insn2_type == 1)
+			write_tsk_long(child, child->thread.addr2,
+					child->thread.insn2);
+	}
+
+	child->thread.single_step = 0;
+	child->thread.ss_nextcnt = 0;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
+
+long
+arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+	int ret;
+	unsigned long __user *datap = (void __user *)data;
+
+	switch (request) {
+	case PTRACE_GETREGS:
+		ret = copy_regset_to_user(child, &user_score_native_view,
+						REGSET_GENERAL,
+						0, sizeof(struct pt_regs),
+						(void __user *)datap);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = copy_regset_from_user(child, &user_score_native_view,
+						REGSET_GENERAL,
+						0, sizeof(struct pt_regs),
+						(const void __user *)datap);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	/* The 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery. */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
+			0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c
new file mode 100644
index 000000000000..6a2503c75c4e
--- /dev/null
+++ b/arch/score/kernel/setup.c
@@ -0,0 +1,159 @@
+/*
+ * arch/score/kernel/setup.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/bootmem.h>
+#include <linux/initrd.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/screen_info.h>
+
+#include <asm-generic/sections.h>
+#include <asm/setup.h>
+
+struct screen_info screen_info;
+unsigned long kernelsp;
+
+static char command_line[COMMAND_LINE_SIZE];
+static struct resource code_resource = { .name = "Kernel code",};
+static struct resource data_resource = { .name = "Kernel data",};
+
+static void __init bootmem_init(void)
+{
+	unsigned long start_pfn, bootmap_size;
+	unsigned long size = initrd_end - initrd_start;
+
+	start_pfn = PFN_UP(__pa(&_end));
+
+	min_low_pfn = PFN_UP(MEMORY_START);
+	max_low_pfn = PFN_UP(MEMORY_START + MEMORY_SIZE);
+
+	/* Initialize the boot-time allocator with low memory only. */
+	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+					 min_low_pfn, max_low_pfn);
+	add_active_range(0, min_low_pfn, max_low_pfn);
+
+	free_bootmem(PFN_PHYS(start_pfn),
+		     (max_low_pfn - start_pfn) << PAGE_SHIFT);
+	memory_present(0, start_pfn, max_low_pfn);
+
+	/* Reserve space for the bootmem bitmap. */
+	reserve_bootmem(PFN_PHYS(start_pfn), bootmap_size, BOOTMEM_DEFAULT);
+
+	if (size == 0) {
+		printk(KERN_INFO "Initrd not found or empty");
+		goto disable;
+	}
+
+	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
+		printk(KERN_ERR "Initrd extends beyond end of memory");
+		goto disable;
+	}
+
+	/* Reserve space for the initrd bitmap. */
+	reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
+	initrd_below_start_ok = 1;
+
+	pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		 initrd_start, size);
+	return;
+disable:
+	printk(KERN_CONT " - disabling initrd\n");
+	initrd_start = 0;
+	initrd_end = 0;
+}
+
+static void __init resource_init(void)
+{
+	struct resource *res;
+
+	code_resource.start = __pa(&_text);
+	code_resource.end = __pa(&_etext) - 1;
+	data_resource.start = __pa(&_etext);
+	data_resource.end = __pa(&_edata) - 1;
+
+	res = alloc_bootmem(sizeof(struct resource));
+	res->name = "System RAM";
+	res->start = MEMORY_START;
+	res->end = MEMORY_START + MEMORY_SIZE - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	request_resource(&iomem_resource, res);
+
+	request_resource(res, &code_resource);
+	request_resource(res, &data_resource);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	randomize_va_space = 0;
+	*cmdline_p = command_line;
+
+	cpu_cache_init();
+	tlb_init();
+	bootmem_init();
+	paging_init();
+	resource_init();
+}
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long n = (unsigned long) v - 1;
+
+	seq_printf(m, "processor\t\t: %ld\n", n);
+	seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	unsigned long i = *pos;
+
+	return i < 1 ? (void *) (i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+
+static int __init topology_init(void)
+{
+	return 0;
+}
+
+subsys_initcall(topology_init);
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
new file mode 100644
index 000000000000..aa57440e4973
--- /dev/null
+++ b/arch/score/kernel/signal.c
@@ -0,0 +1,361 @@
+/*
+ * arch/score/kernel/signal.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
+#include <asm/ucontext.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+struct rt_sigframe {
+	u32 rs_ass[4];		/* argument save space */
+	u32 rs_code[2];		/* signal trampoline */
+	struct siginfo rs_info;
+	struct ucontext rs_uc;
+};
+
+static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	unsigned long reg;
+
+	reg = regs->cp0_epc; err |= __put_user(reg, &sc->sc_pc);
+	err |= __put_user(regs->cp0_psr, &sc->sc_psr);
+	err |= __put_user(regs->cp0_condition, &sc->sc_condition);
+
+
+#define save_gp_reg(i) {				\
+	reg = regs->regs[i];				\
+	err |= __put_user(reg, &sc->sc_regs[i]);	\
+} while (0)
+	save_gp_reg(0); save_gp_reg(1); save_gp_reg(2);
+	save_gp_reg(3); save_gp_reg(4); save_gp_reg(5);
+	save_gp_reg(6);	save_gp_reg(7); save_gp_reg(8);
+	save_gp_reg(9); save_gp_reg(10); save_gp_reg(11);
+	save_gp_reg(12); save_gp_reg(13); save_gp_reg(14);
+	save_gp_reg(15); save_gp_reg(16); save_gp_reg(17);
+	save_gp_reg(18); save_gp_reg(19); save_gp_reg(20);
+	save_gp_reg(21); save_gp_reg(22); save_gp_reg(23);
+	save_gp_reg(24); save_gp_reg(25); save_gp_reg(26);
+	save_gp_reg(27); save_gp_reg(28); save_gp_reg(29);
+#undef save_gp_reg
+
+	reg = regs->ceh; err |= __put_user(reg, &sc->sc_mdceh);
+	reg = regs->cel; err |= __put_user(reg, &sc->sc_mdcel);
+	err |= __put_user(regs->cp0_ecr, &sc->sc_ecr);
+	err |= __put_user(regs->cp0_ema, &sc->sc_ema);
+
+	return err;
+}
+
+static int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	u32 reg;
+
+	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+	err |= __get_user(regs->cp0_condition, &sc->sc_condition);
+
+	err |= __get_user(reg, &sc->sc_mdceh);
+	regs->ceh = (int) reg;
+	err |= __get_user(reg, &sc->sc_mdcel);
+	regs->cel = (int) reg;
+
+	err |= __get_user(reg, &sc->sc_psr);
+	regs->cp0_psr = (int) reg;
+	err |= __get_user(reg, &sc->sc_ecr);
+	regs->cp0_ecr = (int) reg;
+	err |= __get_user(reg, &sc->sc_ema);
+	regs->cp0_ema = (int) reg;
+
+#define restore_gp_reg(i) do {				\
+	err |= __get_user(reg, &sc->sc_regs[i]);	\
+	regs->regs[i] = reg;				\
+} while (0)
+	restore_gp_reg(0); restore_gp_reg(1); restore_gp_reg(2);
+	restore_gp_reg(3); restore_gp_reg(4); restore_gp_reg(5);
+	restore_gp_reg(6); restore_gp_reg(7); restore_gp_reg(8);
+	restore_gp_reg(9); restore_gp_reg(10); restore_gp_reg(11);
+	restore_gp_reg(12); restore_gp_reg(13); restore_gp_reg(14);
+	restore_gp_reg(15); restore_gp_reg(16); restore_gp_reg(17);
+	restore_gp_reg(18); restore_gp_reg(19);	restore_gp_reg(20);
+	restore_gp_reg(21); restore_gp_reg(22); restore_gp_reg(23);
+	restore_gp_reg(24); restore_gp_reg(25); restore_gp_reg(26);
+	restore_gp_reg(27); restore_gp_reg(28); restore_gp_reg(29);
+#undef restore_gp_reg
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static void __user *get_sigframe(struct k_sigaction *ka,
+			struct pt_regs *regs, size_t frame_size)
+{
+	unsigned long sp;
+
+	/* Default to using normal stack */
+	sp = regs->regs[0];
+	sp -= 32;
+
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if ((ka->sa.sa_flags & SA_ONSTACK) && (!on_sig_stack(sp)))
+		sp = current->sas_ss_sp + current->sas_ss_size;
+
+	return (void __user*)((sp - frame_size) & ~7);
+}
+
+asmlinkage long
+score_sigaltstack(struct pt_regs *regs)
+{
+	const stack_t __user *uss = (const stack_t __user *) regs->regs[4];
+	stack_t __user *uoss = (stack_t __user *) regs->regs[5];
+	unsigned long usp = regs->regs[0];
+
+	return do_sigaltstack(uss, uoss, usp);
+}
+
+asmlinkage long
+score_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	sigset_t set;
+	stack_t st;
+	int sig;
+
+	frame = (struct rt_sigframe __user *) regs->regs[0];
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	sig = restore_sigcontext(regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
+
+	if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
+		goto badframe;
+
+	/* It is more difficult to avoid calling this function than to
+	   call it and ignore errors.  */
+	do_sigaltstack((stack_t __user *)&st, NULL, regs->regs[0]);
+
+	__asm__ __volatile__(
+		"mv\tr0, %0\n\t"
+		"la\tr8, syscall_exit\n\t"
+		"br\tr8\n\t"
+		: : "r" (regs) : "r8");
+
+badframe:
+	force_sig(SIGSEGV, current);
+
+	return 0;
+}
+
+static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
+		int signr, sigset_t *set, siginfo_t *info)
+{
+	struct rt_sigframe __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	/*
+	 * Set up the return code ...
+	 *
+	 *         li      v0, __NR_rt_sigreturn
+	 *         syscall
+	 */
+	err |= __put_user(0x87788000 + __NR_rt_sigreturn*2,
+			frame->rs_code + 0);
+	err |= __put_user(0x80008002, frame->rs_code + 1);
+	flush_cache_sigtramp((unsigned long) frame->rs_code);
+
+	err |= copy_siginfo_to_user(&frame->rs_info, info);
+	err |= __put_user(0, &frame->rs_uc.uc_flags);
+	err |= __put_user(NULL, &frame->rs_uc.uc_link);
+	err |= __put_user((void __user *)current->sas_ss_sp,
+				&frame->rs_uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->regs[0]),
+				&frame->rs_uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size,
+				&frame->rs_uc.uc_stack.ss_size);
+	err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext);
+	err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		goto give_sigsegv;
+
+	regs->regs[0] = (unsigned long) frame;
+	regs->regs[3] = (unsigned long) frame->rs_code;
+	regs->regs[4] = signr;
+	regs->regs[5] = (unsigned long) &frame->rs_info;
+	regs->regs[6] = (unsigned long) &frame->rs_uc;
+	regs->regs[29] = (unsigned long) ka->sa.sa_handler;
+	regs->cp0_epc = (unsigned long) ka->sa.sa_handler;
+
+	return 0;
+
+give_sigsegv:
+	if (signr == SIGSEGV)
+		ka->sa.sa_handler = SIG_DFL;
+	force_sig(SIGSEGV, current);
+	return -EFAULT;
+}
+
+static int handle_signal(unsigned long sig, siginfo_t *info,
+	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
+{
+	int ret;
+
+	if (regs->is_syscall) {
+		switch (regs->regs[4]) {
+		case ERESTART_RESTARTBLOCK:
+		case ERESTARTNOHAND:
+			regs->regs[4] = EINTR;
+			break;
+		case ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
+				regs->regs[4] = EINTR;
+				break;
+			}
+		case ERESTARTNOINTR:
+			regs->regs[4] = regs->orig_r4;
+			regs->regs[7] = regs->orig_r7;
+			regs->cp0_epc -= 8;
+		}
+
+		regs->is_syscall = 0;
+	}
+
+	/*
+	 * Set up the stack frame
+	 */
+	ret = setup_rt_frame(ka, regs, sig, oldset, info);
+
+	spin_lock_irq(&current->sighand->siglock);
+	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&current->blocked, sig);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	return ret;
+}
+
+static void do_signal(struct pt_regs *regs)
+{
+	struct k_sigaction ka;
+	sigset_t *oldset;
+	siginfo_t info;
+	int signr;
+
+	/*
+	 * We want the common case to go fast, which is why we may in certain
+	 * cases get here from kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+	if (signr > 0) {
+		/* Actually deliver the signal.  */
+		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
+
+		return;
+	}
+
+	if (regs->is_syscall) {
+		if (regs->regs[4] == ERESTARTNOHAND ||
+		    regs->regs[4] == ERESTARTSYS ||
+		    regs->regs[4] == ERESTARTNOINTR) {
+			regs->regs[4] = regs->orig_r4;
+			regs->regs[7] = regs->orig_r7;
+			regs->cp0_epc -= 8;
+		}
+
+		if (regs->regs[4] == ERESTART_RESTARTBLOCK) {
+			regs->regs[27] = __NR_restart_syscall;
+			regs->regs[4] = regs->orig_r4;
+			regs->regs[7] = regs->orig_r7;
+			regs->cp0_epc -= 8;
+		}
+
+		regs->is_syscall = 0;	/* Don't deal with this again.  */
+	}
+
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back
+	 */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
+				__u32 thread_info_flags)
+{
+	/* deal with pending signal delivery */
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs);
+}
diff --git a/arch/score/kernel/sys_call_table.c b/arch/score/kernel/sys_call_table.c
new file mode 100644
index 000000000000..287369b88c43
--- /dev/null
+++ b/arch/score/kernel/sys_call_table.c
@@ -0,0 +1,12 @@
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+void *sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
new file mode 100644
index 000000000000..001249469866
--- /dev/null
+++ b/arch/score/kernel/sys_score.c
@@ -0,0 +1,151 @@
+/*
+ * arch/score/kernel/syscall.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <linux/unistd.h>
+#include <linux/syscalls.h>
+#include <asm/syscalls.h>
+
+asmlinkage long 
+sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
+	  unsigned long flags, unsigned long fd, unsigned long pgoff)
+{
+	int error = -EBADF;
+	struct file *file = NULL;
+
+	if (pgoff & (~PAGE_MASK >> 12))
+		return -EINVAL;
+
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			return error;
+	}
+
+	down_write(&current->mm->mmap_sem);
+	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+	up_write(&current->mm->mmap_sem);
+
+	if (file)
+		fput(file);
+
+	return error;
+}
+
+asmlinkage long
+sys_mmap(unsigned long addr, unsigned long len, unsigned long prot,
+	unsigned long flags, unsigned long fd, off_t pgoff)
+{
+	return sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
+}
+
+asmlinkage long
+score_fork(struct pt_regs *regs)
+{
+	return do_fork(SIGCHLD, regs->regs[0], regs, 0, NULL, NULL);
+}
+
+/*
+ * Clone a task - this clones the calling program thread.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage long
+score_clone(struct pt_regs *regs)
+{
+	unsigned long clone_flags;
+	unsigned long newsp;
+	int __user *parent_tidptr, *child_tidptr;
+
+	clone_flags = regs->regs[4];
+	newsp = regs->regs[5];
+	if (!newsp)
+		newsp = regs->regs[0];
+	parent_tidptr = (int __user *)regs->regs[6];
+	child_tidptr = (int __user *)regs->regs[8];
+
+	return do_fork(clone_flags, newsp, regs, 0,
+			parent_tidptr, child_tidptr);
+}
+
+asmlinkage long
+score_vfork(struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
+			regs->regs[0], regs, 0, NULL, NULL);
+}
+
+/*
+ * sys_execve() executes a new program.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage long
+score_execve(struct pt_regs *regs)
+{
+	int error;
+	char *filename;
+
+	filename = getname((char __user*)regs->regs[4]);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		return error;
+
+	error = do_execve(filename, (char __user *__user*)regs->regs[5],
+			  (char __user *__user *) regs->regs[6], regs);
+
+	putname(filename);
+	return error;
+}
+
+/*
+ * Do a system call from kernel instead of calling sys_execve so we
+ * end up with proper pt_regs.
+ */
+int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+{
+	register unsigned long __r4 asm("r4") = (unsigned long) filename;
+	register unsigned long __r5 asm("r5") = (unsigned long) argv;
+	register unsigned long __r6 asm("r6") = (unsigned long) envp;
+	register unsigned long __r7 asm("r7");
+
+	__asm__ __volatile__ ("	\n"
+		"ldi	r27, %5		\n"
+		"syscall		\n"
+		"mv	%0, r4		\n"
+		"mv	%1, r7		\n"
+		: "=&r" (__r4), "=r" (__r7)
+		: "r" (__r4), "r" (__r5), "r" (__r6), "i" (__NR_execve)
+		: "r8", "r9", "r10", "r11", "r22", "r23", "r24", "r25",
+		  "r26", "r27", "memory");
+
+	if (__r7 == 0)
+		return __r4;
+
+	return -__r4;
+}
diff --git a/arch/score/kernel/time.c b/arch/score/kernel/time.c
new file mode 100644
index 000000000000..f0a43affb201
--- /dev/null
+++ b/arch/score/kernel/time.c
@@ -0,0 +1,99 @@
+/*
+ * arch/score/kernel/time.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+
+#include <asm/scoreregs.h>
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evdev = dev_id;
+
+	/* clear timer interrupt flag */
+	outl(1, P_TIMER0_CPP_REG);
+	evdev->event_handler(evdev);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction timer_irq = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.name = "timer",
+};
+
+static int score_timer_set_next_event(unsigned long delta,
+		struct clock_event_device *evdev)
+{
+	outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
+	outl(delta, P_TIMER0_PRELOAD);
+	outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
+
+	return 0;
+}
+
+static void score_timer_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *evdev)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
+		outl(SYSTEM_CLOCK/HZ, P_TIMER0_PRELOAD);
+		outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_UNUSED:
+		break;
+	default:
+		BUG();
+	}
+}
+
+static struct clock_event_device score_clockevent = {
+	.name		= "score_clockevent",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 16,
+	.set_next_event	= score_timer_set_next_event,
+	.set_mode	= score_timer_set_mode,
+};
+
+void __init time_init(void)
+{
+	timer_irq.dev_id = &score_clockevent;
+	setup_irq(IRQ_TIMER , &timer_irq);
+
+	/* setup COMPARE clockevent */
+	score_clockevent.mult = div_sc(SYSTEM_CLOCK, NSEC_PER_SEC,
+					score_clockevent.shift);
+	score_clockevent.max_delta_ns = clockevent_delta2ns((u32)~0,
+					&score_clockevent);
+	score_clockevent.min_delta_ns = clockevent_delta2ns(50,
+						&score_clockevent) + 1;
+	score_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&score_clockevent);
+}
diff --git a/arch/score/kernel/traps.c b/arch/score/kernel/traps.c
new file mode 100644
index 000000000000..0e46fb19a848
--- /dev/null
+++ b/arch/score/kernel/traps.c
@@ -0,0 +1,349 @@
+/*
+ * arch/score/kernel/traps.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+
+unsigned long exception_handlers[32];
+
+/*
+ * The architecture-independent show_stack generator
+ */
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	int i;
+	long stackdata;
+
+	sp = sp ? sp : (unsigned long *)&sp;
+
+	printk(KERN_NOTICE "Stack: ");
+	i = 1;
+	while ((long) sp & (PAGE_SIZE - 1)) {
+		if (i && ((i % 8) == 0))
+			printk(KERN_NOTICE "\n");
+		if (i > 40) {
+			printk(KERN_NOTICE " ...");
+			break;
+		}
+
+		if (__get_user(stackdata, sp++)) {
+			printk(KERN_NOTICE " (Bad stack address)");
+			break;
+		}
+
+		printk(KERN_NOTICE " %08lx", stackdata);
+		i++;
+	}
+	printk(KERN_NOTICE "\n");
+}
+
+static void show_trace(long *sp)
+{
+	int i;
+	long addr;
+
+	sp = sp ? sp : (long *) &sp;
+
+	printk(KERN_NOTICE "Call Trace:  ");
+	i = 1;
+	while ((long) sp & (PAGE_SIZE - 1)) {
+		if (__get_user(addr, sp++)) {
+			if (i && ((i % 6) == 0))
+				printk(KERN_NOTICE "\n");
+			printk(KERN_NOTICE " (Bad stack address)\n");
+			break;
+		}
+
+		if (kernel_text_address(addr)) {
+			if (i && ((i % 6) == 0))
+				printk(KERN_NOTICE "\n");
+			if (i > 40) {
+				printk(KERN_NOTICE " ...");
+				break;
+			}
+
+			printk(KERN_NOTICE " [<%08lx>]", addr);
+			i++;
+		}
+	}
+	printk(KERN_NOTICE "\n");
+}
+
+static void show_code(unsigned int *pc)
+{
+	long i;
+
+	printk(KERN_NOTICE "\nCode:");
+
+	for (i = -3; i < 6; i++) {
+		unsigned long insn;
+		if (__get_user(insn, pc + i)) {
+			printk(KERN_NOTICE " (Bad address in epc)\n");
+			break;
+		}
+		printk(KERN_NOTICE "%c%08lx%c", (i ? ' ' : '<'),
+			insn, (i ? ' ' : '>'));
+	}
+}
+
+/*
+ * FIXME: really the generic show_regs should take a const pointer argument.
+ */
+void show_regs(struct pt_regs *regs)
+{
+	printk("r0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[0], regs->regs[1], regs->regs[2], regs->regs[3],
+		regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
+	printk("r8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[8], regs->regs[9], regs->regs[10], regs->regs[11],
+		regs->regs[12], regs->regs[13], regs->regs[14], regs->regs[15]);
+	printk("r16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[16], regs->regs[17], regs->regs[18], regs->regs[19],
+		regs->regs[20], regs->regs[21], regs->regs[22], regs->regs[23]);
+	printk("r24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[24], regs->regs[25], regs->regs[26], regs->regs[27],
+		regs->regs[28], regs->regs[29], regs->regs[30], regs->regs[31]);
+
+	printk("CEH : %08lx\n", regs->ceh);
+	printk("CEL : %08lx\n", regs->cel);
+
+	printk("EMA:%08lx, epc:%08lx %s\nPSR: %08lx\nECR:%08lx\nCondition : %08lx\n",
+		regs->cp0_ema, regs->cp0_epc, print_tainted(), regs->cp0_psr,
+		regs->cp0_ecr, regs->cp0_condition);
+}
+
+static void show_registers(struct pt_regs *regs)
+{
+	show_regs(regs);
+	printk(KERN_NOTICE "Process %s (pid: %d, stackpage=%08lx)\n",
+		current->comm, current->pid, (unsigned long) current);
+	show_stack(current_thread_info()->task, (long *) regs->regs[0]);
+	show_trace((long *) regs->regs[0]);
+	show_code((unsigned int *) regs->cp0_epc);
+	printk(KERN_NOTICE "\n");
+}
+
+/*
+ * The architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+	show_stack(current_thread_info()->task,
+		   (long *) get_irq_regs()->regs[0]);
+}
+EXPORT_SYMBOL(dump_stack);
+
+void __die(const char *str, struct pt_regs *regs, const char *file,
+	const char *func, unsigned long line)
+{
+	console_verbose();
+	printk("%s", str);
+	if (file && func)
+		printk(" in %s:%s, line %ld", file, func, line);
+	printk(":\n");
+	show_registers(regs);
+	do_exit(SIGSEGV);
+}
+
+void __die_if_kernel(const char *str, struct pt_regs *regs,
+		const char *file, const char *func, unsigned long line)
+{
+	if (!user_mode(regs))
+		__die(str, regs, file, func, line);
+}
+
+asmlinkage void do_adelinsn(struct pt_regs *regs)
+{
+	printk("do_ADE-linsn:ema:0x%08lx:epc:0x%08lx\n",
+		 regs->cp0_ema, regs->cp0_epc);
+	die_if_kernel("do_ade execution Exception\n", regs);
+	force_sig(SIGBUS, current);
+}
+
+asmlinkage void do_adedata(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+	fixup = search_exception_tables(regs->cp0_epc);
+	if (fixup) {
+		regs->cp0_epc = fixup->fixup;
+		return;
+	}
+	printk("do_ADE-data:ema:0x%08lx:epc:0x%08lx\n",
+		 regs->cp0_ema, regs->cp0_epc);
+	die_if_kernel("do_ade execution Exception\n", regs);
+	force_sig(SIGBUS, current);
+}
+
+asmlinkage void do_pel(struct pt_regs *regs)
+{
+	die_if_kernel("do_pel execution Exception", regs);
+	force_sig(SIGFPE, current);
+}
+
+asmlinkage void do_cee(struct pt_regs *regs)
+{
+	die_if_kernel("do_cee execution Exception", regs);
+	force_sig(SIGFPE, current);
+}
+
+asmlinkage void do_cpe(struct pt_regs *regs)
+{
+	die_if_kernel("do_cpe execution Exception", regs);
+	force_sig(SIGFPE, current);
+}
+
+asmlinkage void do_be(struct pt_regs *regs)
+{
+	die_if_kernel("do_be execution Exception", regs);
+	force_sig(SIGBUS, current);
+}
+
+asmlinkage void do_ov(struct pt_regs *regs)
+{
+	siginfo_t info;
+
+	die_if_kernel("do_ov execution Exception", regs);
+
+	info.si_code = FPE_INTOVF;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_addr = (void *)regs->cp0_epc;
+	force_sig_info(SIGFPE, &info, current);
+}
+
+asmlinkage void do_tr(struct pt_regs *regs)
+{
+	die_if_kernel("do_tr execution Exception", regs);
+	force_sig(SIGTRAP, current);
+}
+
+asmlinkage void do_ri(struct pt_regs *regs)
+{
+	unsigned long epc_insn;
+	unsigned long epc = regs->cp0_epc;
+
+	read_tsk_long(current, epc, &epc_insn);
+	if (current->thread.single_step == 1) {
+		if ((epc == current->thread.addr1) ||
+		    (epc == current->thread.addr2)) {
+			user_disable_single_step(current);
+			force_sig(SIGTRAP, current);
+			return;
+		} else
+			BUG();
+	} else if ((epc_insn == BREAKPOINT32_INSN) ||
+		   ((epc_insn & 0x0000FFFF) == 0x7002) ||
+		   ((epc_insn & 0xFFFF0000) == 0x70020000)) {
+			force_sig(SIGTRAP, current);
+			return;
+	} else {
+		die_if_kernel("do_ri execution Exception", regs);
+		force_sig(SIGILL, current);
+	}
+}
+
+asmlinkage void do_ccu(struct pt_regs *regs)
+{
+	die_if_kernel("do_ccu execution Exception", regs);
+	force_sig(SIGILL, current);
+}
+
+asmlinkage void do_reserved(struct pt_regs *regs)
+{
+	/*
+	 * Game over - no way to handle this if it ever occurs.  Most probably
+	 * caused by a new unknown cpu type or after another deadly
+	 * hard/software error.
+	 */
+	die_if_kernel("do_reserved execution Exception", regs);
+	show_regs(regs);
+	panic("Caught reserved exception - should not happen.");
+}
+
+/*
+ * NMI exception handler.
+ */
+void nmi_exception_handler(struct pt_regs *regs)
+{
+	die_if_kernel("nmi_exception_handler execution Exception", regs);
+	die("NMI", regs);
+}
+
+/* Install CPU exception handler */
+void *set_except_vector(int n, void *addr)
+{
+	unsigned long handler = (unsigned long) addr;
+	unsigned long old_handler = exception_handlers[n];
+
+	exception_handlers[n] = handler;
+	return (void *)old_handler;
+}
+
+void __init trap_init(void)
+{
+	int i;
+
+	pgd_current = (unsigned long)init_mm.pgd;
+	/* DEBUG EXCEPTION */
+	memcpy((void *)DEBUG_VECTOR_BASE_ADDR,
+			&debug_exception_vector, DEBUG_VECTOR_SIZE);
+	/* NMI EXCEPTION */
+	memcpy((void *)GENERAL_VECTOR_BASE_ADDR,
+			&general_exception_vector, GENERAL_VECTOR_SIZE);
+
+	/*
+	 * Initialise exception handlers
+	 */
+	for (i = 0; i <= 31; i++)
+		set_except_vector(i, handle_reserved);
+
+	set_except_vector(1, handle_nmi);
+	set_except_vector(2, handle_adelinsn);
+	set_except_vector(3, handle_tlb_refill);
+	set_except_vector(4, handle_tlb_invaild);
+	set_except_vector(5, handle_ibe);
+	set_except_vector(6, handle_pel);
+	set_except_vector(7, handle_sys);
+	set_except_vector(8, handle_ccu);
+	set_except_vector(9, handle_ri);
+	set_except_vector(10, handle_tr);
+	set_except_vector(11, handle_adedata);
+	set_except_vector(12, handle_adedata);
+	set_except_vector(13, handle_tlb_refill);
+	set_except_vector(14, handle_tlb_invaild);
+	set_except_vector(15, handle_mod);
+	set_except_vector(16, handle_cee);
+	set_except_vector(17, handle_cpe);
+	set_except_vector(18, handle_dbe);
+	flush_icache_range(DEBUG_VECTOR_BASE_ADDR, IRQ_VECTOR_BASE_ADDR);
+
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	cpu_cache_init();
+}
diff --git a/arch/score/kernel/vmlinux.lds.S b/arch/score/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..f85569831d5c
--- /dev/null
+++ b/arch/score/kernel/vmlinux.lds.S
@@ -0,0 +1,148 @@
+/*
+ * arch/score/kernel/vmlinux.lds.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_ARCH(score)
+ENTRY(_stext)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+	. = CONFIG_MEMORY_START + 0x2000;
+	/* read-only */
+	.text : {
+		_text = .;	/* Text and read-only data */
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		*(.text.*)
+		*(.fixup)
+		. = ALIGN (4) ;
+		_etext = .;	/* End of text section */
+	}
+
+	. = ALIGN(16);
+	RODATA
+
+	/* Exception table */
+	. = ALIGN(16);
+	__ex_table : {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+	}
+
+	/* writeable */
+	.data ALIGN (4096): {
+		*(.data.init_task)
+
+		DATA_DATA
+		CONSTRUCTORS
+	}
+
+	/* We want the small data sections together, so single-instruction offsets
+	   can access them all, and initialized data all before uninitialized, so
+	   we can shorten the on-disk segment size.  */
+	. = ALIGN(8);
+	.sdata : {
+		*(.sdata)
+	}
+
+	. = ALIGN(32);
+	.data.cacheline_aligned : {
+		*(.data.cacheline_aligned)
+	}
+	_edata =  .;			/* End of data section */
+
+	/* will be freed after init */
+	. = ALIGN(4096);		/* Init code and data */
+	__init_begin = .;
+
+	. = ALIGN(4096);
+	.init.text : {
+		_sinittext = .;
+		INIT_TEXT
+		_einittext = .;
+	}
+	.init.data : {
+		INIT_DATA
+	}
+	. = ALIGN(16);
+	.init.setup : {
+		__setup_start = .;
+		*(.init.setup)
+		__setup_end = .;
+	}
+
+	.initcall.init : {
+		__initcall_start = .;
+		INITCALLS
+		__initcall_end = .;
+	}
+
+	.con_initcall.init : {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+	SECURITY_INIT
+
+	/* .exit.text is discarded at runtime, not link time, to deal with
+	 * references from .rodata
+	 */
+	.exit.text : {
+		EXIT_TEXT
+	}
+	.exit.data : {
+		EXIT_DATA
+	}
+#if defined(CONFIG_BLK_DEV_INITRD)
+	.init.ramfs ALIGN(4096): {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+		. = ALIGN(4);
+		LONG(0);
+	}
+#endif
+	. = ALIGN(4096);
+	__init_end = .;
+	/* freed after init ends here */
+
+	__bss_start = .;	/* BSS */
+	.sbss  : {
+		*(.sbss)
+		*(.scommon)
+	}
+	.bss : {
+		*(.bss)
+		*(COMMON)
+	}
+	__bss_stop = .;
+	_end = .;
+}
diff --git a/arch/score/lib/Makefile b/arch/score/lib/Makefile
new file mode 100644
index 000000000000..553e30e81faf
--- /dev/null
+++ b/arch/score/lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for SCORE-specific library files..
+#
+
+lib-y += string.o checksum.o checksum_copy.o
+
+# libgcc-style stuff needed in the kernel
+obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/score/lib/ashldi3.c b/arch/score/lib/ashldi3.c
new file mode 100644
index 000000000000..15691a910431
--- /dev/null
+++ b/arch/score/lib/ashldi3.c
@@ -0,0 +1,46 @@
+/*
+ * arch/score/lib/ashldi3.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+long long __ashldi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.low = 0;
+		w.s.high = (unsigned int) uu.s.low << -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.low >> bm;
+
+		w.s.low = (unsigned int) uu.s.low << b;
+		w.s.high = ((unsigned int) uu.s.high << b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/score/lib/ashrdi3.c b/arch/score/lib/ashrdi3.c
new file mode 100644
index 000000000000..d9814a5d8d30
--- /dev/null
+++ b/arch/score/lib/ashrdi3.c
@@ -0,0 +1,48 @@
+/*
+ * arch/score/lib/ashrdi3.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+long long __ashrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		/* w.s.high = 1..1 or 0..0 */
+		w.s.high =
+		    uu.s.high >> 31;
+		w.s.low = uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/score/lib/checksum.S b/arch/score/lib/checksum.S
new file mode 100644
index 000000000000..706157edc7d5
--- /dev/null
+++ b/arch/score/lib/checksum.S
@@ -0,0 +1,255 @@
+/*
+ * arch/score/lib/csum_partial.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/linkage.h>
+
+#define ADDC(sum,reg)			\
+	add	sum, sum, reg;		\
+	cmp.c	reg, sum;		\
+	bleu	9f;			\
+	addi	sum, 0x1;		\
+9:
+
+#define CSUM_BIGCHUNK(src, offset, sum)		\
+	lw	r8, [src, offset + 0x00];	\
+	lw	r9, [src, offset + 0x04];	\
+	lw	r10, [src, offset + 0x08];	\
+	lw	r11, [src, offset + 0x0c];	\
+	ADDC(sum, r8);				\
+	ADDC(sum, r9);				\
+	ADDC(sum, r10);				\
+	ADDC(sum, r11);				\
+	lw	r8, [src, offset + 0x10];	\
+	lw	r9, [src, offset + 0x14];	\
+	lw	r10, [src, offset + 0x18]; 	\
+	lw	r11, [src, offset + 0x1c]; 	\
+	ADDC(sum, r8);				\
+	ADDC(sum, r9);				\
+	ADDC(sum, r10);				\
+	ADDC(sum, r11);				\
+
+#define src r4
+#define dest r5
+#define sum r27
+
+	.text
+/* unknown src alignment and < 8 bytes to go */
+small_csumcpy:
+	mv	r5, r10
+	ldi	r9, 0x0
+	cmpi.c	r25, 0x1
+	beq pass_small_set_t7	/*already set, jump to pass_small_set_t7*/
+	andri.c	r25,r4 , 0x1	/*Is src 2 bytes aligned?*/
+
+pass_small_set_t7:
+	beq	aligned
+	cmpi.c	r5, 0x0
+	beq	fold
+	lbu	r9, [src]
+	slli	r9,r9, 0x8	/*Little endian*/
+	ADDC(sum, r9)
+	addi	src, 0x1
+	subi.c	r5, 0x1
+
+	/*len still a full word */
+aligned:
+	andri.c r8, r5, 0x4	/*Len >= 4?*/
+	beq	len_less_4bytes
+
+	/* Still a full word (4byte) to go,and the src is word aligned.*/
+	andri.c	r8, src, 0x3	/*src is 4bytes aligned, so use LW!!*/
+	beq	four_byte_aligned
+	lhu 	r9, [src]
+	addi	src, 2
+	ADDC(sum, r9)
+	lhu 	r9, [src]
+	addi	src, 2
+	ADDC(sum, r9)
+	b len_less_4bytes
+
+four_byte_aligned:		/* Len >=4 and four byte aligned */
+	lw	r9, [src]
+	addi	src, 4
+	ADDC(sum, r9)
+
+len_less_4bytes:		/* 2 byte aligned aligned and length<4B */
+	andri.c r8, r5, 0x2
+	beq	len_less_2bytes
+	lhu	r9, [src]
+	addi	src, 0x2	/* src+=2 */
+	ADDC(sum, r9)
+
+len_less_2bytes:		/* len = 1 */
+	andri.c r8, r5, 0x1
+	beq 	fold		/* less than 2 and not equal 1--> len=0 -> fold */
+	lbu	r9, [src]
+
+fold_ADDC:
+	ADDC(sum, r9)
+fold:
+	/* fold checksum */
+	slli	r26, sum, 16
+	add	sum, sum, r26
+	cmp.c	r26, sum
+	srli	sum, sum, 16
+	bleu 	1f 		/* if r26<=sum */
+	addi	sum, 0x1 	/* r26>sum */
+1:
+	/* odd buffer alignment? r25 was set in csum_partial */
+	cmpi.c	r25, 0x0
+	beq	1f
+	slli	r26, sum, 8
+	srli	sum, sum, 8
+	or	sum, sum, r26
+	andi	sum, 0xffff
+1:
+	.set	optimize
+	/* Add the passed partial csum. */
+	ADDC(sum, r6)
+	mv	r4, sum
+	br	r3
+	.set	volatile
+
+	.align	5
+ENTRY(csum_partial)
+	ldi sum, 0
+	ldi r25, 0
+	mv r10, r5
+	cmpi.c	r5, 0x8
+	blt	small_csumcpy		/* < 8(singed) bytes to copy */
+	cmpi.c	r5, 0x0
+	beq	out
+	andri.c	r25, src, 0x1		/* odd buffer? */
+
+	beq	word_align
+hword_align:				/* 1 byte */
+	lbu	r8, [src]
+	subi	r5, 0x1
+	slli	r8, r8, 8
+	ADDC(sum, r8)
+	addi	src, 0x1
+
+word_align:				/* 2 bytes */
+	andri.c r8, src, 0x2		/* 4bytes(dword)_aligned? */
+	beq	dword_align		/* not, maybe dword_align */
+	lhu	r8, [src]
+	subi	r5, 0x2
+	ADDC(sum, r8)
+	addi	src, 0x2
+
+dword_align:				/* 4bytes */
+	mv 	r26, r5			/* maybe useless when len >=56 */
+	ldi 	r8, 56
+	cmp.c	r8, r5
+	bgtu	do_end_words		/* if a1(len)<t0(56) ,unsigned */
+	andri.c	r26, src, 0x4
+	beq	qword_align
+	lw	r8, [src]
+	subi	r5, 0x4
+	ADDC(sum, r8)
+	addi	src, 0x4
+
+qword_align:				/* 8 bytes */
+	andri.c r26, src, 0x8
+	beq	oword_align
+	lw	r8, [src, 0x0]
+	lw	r9, [src, 0x4]
+	subi	r5, 0x8			/* len-=0x8 */
+	ADDC(sum, r8)
+	ADDC(sum, r9)
+	addi	src, 0x8
+
+oword_align:				/* 16bytes */
+	andri.c	r26, src, 0x10
+	beq	begin_movement
+	lw	r10, [src, 0x08]
+	lw	r11, [src, 0x0c]
+	lw	r8, [src, 0x00]
+	lw	r9, [src, 0x04]
+	ADDC(sum, r10)
+	ADDC(sum, r11)
+	ADDC(sum, r8)
+	ADDC(sum, r9)
+	subi	r5, 0x10
+	addi	src, 0x10
+
+begin_movement:
+	srli.c	r26, r5, 0x7		/* len>=128? */
+	beq	1f			/* len<128 */
+
+/* r26 is the result that computed in oword_align */
+move_128bytes:
+	CSUM_BIGCHUNK(src, 0x00, sum)
+	CSUM_BIGCHUNK(src, 0x20, sum)
+	CSUM_BIGCHUNK(src, 0x40, sum)
+	CSUM_BIGCHUNK(src, 0x60, sum)
+	subi.c	r26, 0x01		/* r26 equals len/128 */
+	addi	src, 0x80
+	bne	move_128bytes
+
+1:	/* len<128,we process 64byte here */
+	andri.c	r10, r5, 0x40
+	beq	1f
+
+move_64bytes:
+	CSUM_BIGCHUNK(src, 0x00, sum)
+	CSUM_BIGCHUNK(src, 0x20, sum)
+	addi	src, 0x40
+
+1:					/* len<64 */
+	andri	r26, r5, 0x1c		/* 0x1c=28 */
+	andri.c	r10, r5, 0x20
+	beq	do_end_words		/* decided by andri */
+
+move_32bytes:
+	CSUM_BIGCHUNK(src, 0x00, sum)
+	andri	r26, r5, 0x1c
+	addri	src, src, 0x20
+
+do_end_words:				/* len<32 */
+	/* r26 was set already in dword_align */
+	cmpi.c	r26, 0x0
+	beq	maybe_end_cruft		/* len<28 or len<56 */
+	srli	r26, r26, 0x2
+
+end_words:
+	lw	r8, [src]
+	subi.c	r26, 0x1		/* unit is 4 byte */
+	ADDC(sum, r8)
+	addi	src, 0x4
+	cmpi.c	r26, 0x0
+	bne	end_words		/* r26!=0 */
+
+maybe_end_cruft:			/* len<4 */
+	andri	r10, r5, 0x3
+
+small_memcpy:
+	mv	r5, r10
+	j	small_csumcpy
+
+out:
+	mv	r4, sum
+	br	r3
+
+END(csum_partial)
diff --git a/arch/score/lib/checksum_copy.c b/arch/score/lib/checksum_copy.c
new file mode 100644
index 000000000000..04565dd3ded8
--- /dev/null
+++ b/arch/score/lib/checksum_copy.c
@@ -0,0 +1,52 @@
+/*
+ * arch/score/lib/csum_partial_copy.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <net/checksum.h>
+
+#include <asm/uaccess.h>
+
+unsigned int csum_partial_copy(const char *src, char *dst,
+				int len, unsigned int sum)
+{
+	sum = csum_partial(src, len, sum);
+	memcpy(dst, src, len);
+
+	return sum;
+}
+
+unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+					int len, unsigned int sum,
+					int *err_ptr)
+{
+	int missing;
+
+	missing = copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*err_ptr = -EFAULT;
+	}
+
+	return csum_partial(dst, len, sum);
+}
diff --git a/arch/score/lib/cmpdi2.c b/arch/score/lib/cmpdi2.c
new file mode 100644
index 000000000000..1ed5290c66ed
--- /dev/null
+++ b/arch/score/lib/cmpdi2.c
@@ -0,0 +1,44 @@
+/*
+ * arch/score/lib/cmpdi2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+word_type __cmpdi2(long long a, long long b)
+{
+	const DWunion au = {
+		.ll = a
+	};
+	const DWunion bu = {
+		.ll = b
+	};
+
+	if (au.s.high < bu.s.high)
+		return 0;
+	else if (au.s.high > bu.s.high)
+		return 2;
+
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+
+	return 1;
+}
+EXPORT_SYMBOL(__cmpdi2);
diff --git a/arch/score/lib/libgcc.h b/arch/score/lib/libgcc.h
new file mode 100644
index 000000000000..0f12543d9f31
--- /dev/null
+++ b/arch/score/lib/libgcc.h
@@ -0,0 +1,37 @@
+/*
+ * arch/score/lib/libgcc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DWstruct {
+	int low, high;
+};
+
+typedef union {
+	struct DWstruct s;
+	long long ll;
+} DWunion;
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/score/lib/lshrdi3.c b/arch/score/lib/lshrdi3.c
new file mode 100644
index 000000000000..ce21175fd791
--- /dev/null
+++ b/arch/score/lib/lshrdi3.c
@@ -0,0 +1,47 @@
+/*
+ * arch/score/lib/lshrdi3.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+long long __lshrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.high = 0;
+		w.s.low = (unsigned int) uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = (unsigned int) uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/score/lib/string.S b/arch/score/lib/string.S
new file mode 100644
index 000000000000..00b7d3a2fc60
--- /dev/null
+++ b/arch/score/lib/string.S
@@ -0,0 +1,184 @@
+/*
+ * arch/score/lib/string.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/linkage.h>
+#include <asm-generic/errno.h>
+
+	.text
+	.align 2
+ENTRY(__strncpy_from_user)
+	cmpi.c	r6, 0
+	mv	r9, r6
+	ble	.L2
+0:	lbu	r7, [r5]
+	ldi	r8, 0
+1:	sb	r7, [r4]
+2:	lb	r6, [r5]
+	cmp.c	r6, r8
+	beq	.L2
+
+.L5:
+	addi	r8, 1
+	cmp.c	r8, r9
+	beq	.L7
+3:	lbu	r6, [r5, 1]+
+4:	sb	r6, [r4, 1]+
+5:	lb	r7, [r5]
+	cmpi.c	r7, 0
+	bne	.L5
+.L7:
+	mv	r4, r8
+	br	r3
+.L2:
+	ldi	r8, 0
+	mv	r4, r8
+	br	r3
+	.section .fixup, "ax"
+99:
+	ldi	r4, -EFAULT
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+	.word	0b ,99b
+	.word	1b ,99b
+	.word	2b ,99b
+	.word	3b ,99b
+	.word	4b ,99b
+	.word	5b ,99b
+	.previous
+
+	.align 2
+ENTRY(__strnlen_user)
+	cmpi.c	r5, 0
+	ble	.L11
+0:	lb	r6, [r4]
+	ldi	r7, 0
+	cmp.c	r6, r7
+	beq	.L11
+.L15:
+	addi	r7, 1
+	cmp.c	r7, r5
+	beq	.L23
+1:	lb	r6, [r4,1]+
+	cmpi.c	r6, 0
+	bne	.L15
+.L23:
+	addri	r4, r7, 1
+	br	r3
+
+.L11:
+	ldi	r4, 1
+	br	r3
+	.section .fixup, "ax"
+99:
+	ldi	r4, 0
+	br	r3
+
+	.section __ex_table,"a"
+	.align 2
+	.word	0b, 99b
+	.word	1b, 99b
+	.previous
+
+	.align 2
+ENTRY(__strlen_user)
+0:	lb	r6, [r4]
+	mv	r7, r4
+	extsb	r6, r6
+	cmpi.c	r6, 0
+	mv	r4, r6
+	beq	.L27
+.L28:
+1:	lb	r6, [r7, 1]+
+	addi	r6, 1
+	cmpi.c	r6, 0
+	bne	.L28
+.L27:
+	br	r3
+	.section .fixup, "ax"
+	ldi	r4, 0x0
+	br	r3
+99:
+	ldi	r4, 0
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+	.word	0b ,99b
+	.word	1b ,99b
+	.previous
+
+	.align 2
+ENTRY(__copy_tofrom_user)
+	cmpi.c	r6, 0
+	mv	r10,r6
+	beq	.L32
+	ldi	r9, 0
+.L34:
+	add	r6, r5, r9
+0:	lbu	r8, [r6]
+	add	r7, r4, r9
+1:	sb	r8, [r7]
+	addi	r9, 1
+	cmp.c	r9, r10
+	bne	.L34
+.L32:
+	ldi	r4, 0
+	br	r3
+	.section .fixup, "ax"
+99:
+	sub	r4, r10, r9
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+	.word	0b, 99b
+	.word	1b, 99b
+	.previous
+
+	.align 2
+ENTRY(__clear_user)
+	cmpi.c	r5, 0
+	beq	.L38
+	ldi	r6, 0
+	mv	r7, r6
+.L40:
+	addi	r6, 1
+0:	sb	r7, [r4]+, 1
+	cmp.c	r6, r5
+	bne	.L40
+.L38:
+	ldi	r4, 0
+	br	r3
+
+	.section .fixup, "ax"
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+99:
+	.word	0b, 99b
+	.previous
diff --git a/arch/score/lib/ucmpdi2.c b/arch/score/lib/ucmpdi2.c
new file mode 100644
index 000000000000..b15241e0b079
--- /dev/null
+++ b/arch/score/lib/ucmpdi2.c
@@ -0,0 +1,38 @@
+/*
+ * arch/score/lib/ucmpdi2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+word_type __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+	const DWunion au = {.ll = a};
+	const DWunion bu = {.ll = b};
+
+	if ((unsigned int) au.s.high < (unsigned int) bu.s.high)
+		return 0;
+	else if ((unsigned int) au.s.high > (unsigned int) bu.s.high)
+		return 2;
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+	return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/score/mm/Makefile b/arch/score/mm/Makefile
new file mode 100644
index 000000000000..7b1e29b1f8cd
--- /dev/null
+++ b/arch/score/mm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux/SCORE-specific parts of the memory manager.
+#
+
+obj-y += cache.o extable.o fault.o init.o \
+	tlb-miss.o tlb-score.o pgtable.o
diff --git a/arch/score/mm/cache.c b/arch/score/mm/cache.c
new file mode 100644
index 000000000000..dbac9d9dfddd
--- /dev/null
+++ b/arch/score/mm/cache.c
@@ -0,0 +1,257 @@
+/*
+ * arch/score/mm/cache.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#include <asm/mmu_context.h>
+
+/*
+Just flush entire Dcache!!
+You must ensure the page doesn't include instructions, because
+the function will not flush the Icache.
+The addr must be cache aligned.
+*/
+static void flush_data_cache_page(unsigned long addr)
+{
+	unsigned int i;
+	for (i = 0; i < (PAGE_SIZE / L1_CACHE_BYTES); i += L1_CACHE_BYTES) {
+		__asm__ __volatile__(
+		"cache 0x0e, [%0, 0]\n"
+		"cache 0x1a, [%0, 0]\n"
+		"nop\n"
+		: : "r" (addr));
+		addr += L1_CACHE_BYTES;
+	}
+}
+
+/* called by update_mmu_cache. */
+void __update_cache(struct vm_area_struct *vma, unsigned long address,
+		pte_t pte)
+{
+	struct page *page;
+	unsigned long pfn, addr;
+	int exec = (vma->vm_flags & VM_EXEC);
+
+	pfn = pte_pfn(pte);
+	if (unlikely(!pfn_valid(pfn)))
+		return;
+	page = pfn_to_page(pfn);
+	if (page_mapping(page) && test_bit(PG_arch_1, &page->flags)) {
+		addr = (unsigned long) page_address(page);
+		if (exec)
+			flush_data_cache_page(addr);
+		clear_bit(PG_arch_1, &page->flags);
+	}
+}
+
+static inline void setup_protection_map(void)
+{
+	protection_map[0] = PAGE_NONE;
+	protection_map[1] = PAGE_READONLY;
+	protection_map[2] = PAGE_COPY;
+	protection_map[3] = PAGE_COPY;
+	protection_map[4] = PAGE_READONLY;
+	protection_map[5] = PAGE_READONLY;
+	protection_map[6] = PAGE_COPY;
+	protection_map[7] = PAGE_COPY;
+	protection_map[8] = PAGE_NONE;
+	protection_map[9] = PAGE_READONLY;
+	protection_map[10] = PAGE_SHARED;
+	protection_map[11] = PAGE_SHARED;
+	protection_map[12] = PAGE_READONLY;
+	protection_map[13] = PAGE_READONLY;
+	protection_map[14] = PAGE_SHARED;
+	protection_map[15] = PAGE_SHARED;
+}
+
+void __devinit cpu_cache_init(void)
+{
+	setup_protection_map();
+}
+
+void flush_icache_all(void)
+{
+	__asm__ __volatile__(
+	"la r8, flush_icache_all\n"
+	"cache 0x10, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	: : : "r8");
+}
+
+void flush_dcache_all(void)
+{
+	__asm__ __volatile__(
+	"la r8, flush_dcache_all\n"
+	"cache 0x1f, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1a, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	: : : "r8");
+}
+
+void flush_cache_all(void)
+{
+	__asm__ __volatile__(
+	"la r8, flush_cache_all\n"
+	"cache 0x10, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1f, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1a, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	: : : "r8");
+}
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+	if (!(mm->context))
+		return;
+	flush_cache_all();
+}
+
+/*if we flush a range precisely , the processing may be very long.
+We must check each page in the range whether present. If the page is present,
+we can flush the range in the page. Be careful, the range may be cross two
+page, a page is present and another is not present.
+*/
+/*
+The interface is provided in hopes that the port can find
+a suitably efficient method for removing multiple page
+sized regions from the cache.
+*/
+void flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	int exec = vma->vm_flags & VM_EXEC;
+	pgd_t *pgdp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+	pte_t *ptep;
+
+	if (!(mm->context))
+		return;
+
+	pgdp = pgd_offset(mm, start);
+	pudp = pud_offset(pgdp, start);
+	pmdp = pmd_offset(pudp, start);
+	ptep = pte_offset(pmdp, start);
+
+	while (start <= end) {
+		unsigned long tmpend;
+		pgdp = pgd_offset(mm, start);
+		pudp = pud_offset(pgdp, start);
+		pmdp = pmd_offset(pudp, start);
+		ptep = pte_offset(pmdp, start);
+
+		if (!(pte_val(*ptep) & _PAGE_PRESENT)) {
+			start = (start + PAGE_SIZE) & ~(PAGE_SIZE - 1);
+			continue;
+		}
+		tmpend = (start | (PAGE_SIZE-1)) > end ?
+				 end : (start | (PAGE_SIZE-1));
+
+		flush_dcache_range(start, tmpend);
+		if (exec)
+			flush_icache_range(start, tmpend);
+		start = (start + PAGE_SIZE) & ~(PAGE_SIZE - 1);
+	}
+}
+
+void flush_cache_page(struct vm_area_struct *vma,
+		unsigned long addr, unsigned long pfn)
+{
+	int exec = vma->vm_flags & VM_EXEC;
+	unsigned long kaddr = 0xa0000000 | (pfn << PAGE_SHIFT);
+
+	flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
+
+	if (exec)
+		flush_icache_range(kaddr, kaddr + PAGE_SIZE);
+}
+
+void flush_cache_sigtramp(unsigned long addr)
+{
+	__asm__ __volatile__(
+	"cache 0x02, [%0, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+	"cache 0x02, [%0, 0x4]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+
+	"cache 0x0d, [%0, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+	"cache 0x0d, [%0, 0x4]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+
+	"cache 0x1a, [%0, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (addr));
+}
+
+/*
+1. WB and invalid a cache line of Dcache
+2. Drain Write Buffer
+the range must be smaller than PAGE_SIZE
+*/
+void flush_dcache_range(unsigned long start, unsigned long end)
+{
+	int size, i;
+
+	start = start & ~(L1_CACHE_BYTES - 1);
+	end = end & ~(L1_CACHE_BYTES - 1);
+	size = end - start;
+	/* flush dcache to ram, and invalidate dcache lines. */
+	for (i = 0; i < size; i += L1_CACHE_BYTES) {
+		__asm__ __volatile__(
+		"cache 0x0e, [%0, 0]\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		"cache 0x1a, [%0, 0]\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (start));
+		start += L1_CACHE_BYTES;
+	}
+}
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	int size, i;
+	start = start & ~(L1_CACHE_BYTES - 1);
+	end = end & ~(L1_CACHE_BYTES - 1);
+
+	size = end - start;
+	/* invalidate icache lines. */
+	for (i = 0; i < size; i += L1_CACHE_BYTES) {
+		__asm__ __volatile__(
+		"cache 0x02, [%0, 0]\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (start));
+		start += L1_CACHE_BYTES;
+	}
+}
diff --git a/arch/score/mm/extable.c b/arch/score/mm/extable.c
new file mode 100644
index 000000000000..01ff6445171c
--- /dev/null
+++ b/arch/score/mm/extable.c
@@ -0,0 +1,38 @@
+/*
+ * arch/score/mm/extable.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(regs->cp0_epc);
+	if (fixup) {
+		regs->cp0_epc = fixup->fixup;
+		return 1;
+	}
+	return 0;
+}
diff --git a/arch/score/mm/fault.c b/arch/score/mm/fault.c
new file mode 100644
index 000000000000..47b600e4b2c5
--- /dev/null
+++ b/arch/score/mm/fault.c
@@ -0,0 +1,235 @@
+/*
+ * arch/score/mm/fault.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
+				unsigned long address)
+{
+	struct vm_area_struct *vma = NULL;
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->mm;
+	const int field = sizeof(unsigned long) * 2;
+	siginfo_t info;
+	int fault;
+
+	info.si_code = SEGV_MAPERR;
+
+	/*
+	* We fault-in kernel-space virtual memory on-demand. The
+	* 'reference' page table is init_mm.pgd.
+	*
+	* NOTE! We MUST NOT take any locks for this case. We may
+	* be in an interrupt or a critical region, and should
+	* only copy the information from the master page table,
+	* nothing more.
+	*/
+	if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
+		goto vmalloc_fault;
+#ifdef MODULE_START
+	if (unlikely(address >= MODULE_START && address < MODULE_END))
+		goto vmalloc_fault;
+#endif
+
+	/*
+	* If we're in an interrupt or have no user
+	* context, we must not take the fault..
+	*/
+	if (in_atomic() || !mm)
+		goto bad_area_nosemaphore;
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
+	if (vma->vm_start <= address)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+	if (expand_stack(vma, address))
+		goto bad_area;
+	/*
+	* Ok, we have a good vm_area for this memory access, so
+	* we can handle it..
+	 */
+good_area:
+	info.si_code = SEGV_ACCERR;
+
+	if (write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	} else {
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
+			goto bad_area;
+	}
+
+survive:
+	/*
+	* If for any reason at all we couldn't handle the fault,
+	* make sure we exit gracefully rather than endlessly redo
+	* the fault.
+	*/
+	fault = handle_mm_fault(mm, vma, address, write);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		tsk->maj_flt++;
+	else
+		tsk->min_flt++;
+
+	up_read(&mm->mmap_sem);
+	return;
+
+	/*
+	* Something tried to access memory that isn't in our memory map..
+	* Fix it, but check if it's kernel or user first..
+	 */
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+	/* User mode accesses just cause a SIGSEGV */
+	if (user_mode(regs)) {
+		tsk->thread.cp0_badvaddr = address;
+		tsk->thread.error_code = write;
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		/* info.si_code has been set above */
+		info.si_addr = (void __user *) address;
+		force_sig_info(SIGSEGV, &info, tsk);
+		return;
+	}
+
+no_context:
+	/* Are we prepared to handle this kernel fault? */
+	if (fixup_exception(regs)) {
+		current->thread.cp0_baduaddr = address;
+		return;
+	}
+
+	/*
+	* Oops. The kernel tried to access some bad page. We'll have to
+	* terminate things with extreme prejudice.
+	*/
+	bust_spinlocks(1);
+
+	printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
+			"virtual address %0*lx, epc == %0*lx, ra == %0*lx\n",
+			0, field, address, field, regs->cp0_epc,
+			field, regs->regs[3]);
+	die("Oops", regs);
+
+	/*
+	* We ran out of memory, or some other thing happened to us that made
+	* us unable to handle the page fault gracefully.
+	*/
+out_of_memory:
+	up_read(&mm->mmap_sem);
+	if (is_global_init(tsk)) {
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	printk("VM: killing process %s\n", tsk->comm);
+	if (user_mode(regs))
+		do_group_exit(SIGKILL);
+	goto no_context;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+	/* Kernel mode? Handle exceptions or die */
+	if (!user_mode(regs))
+		goto no_context;
+	else
+	/*
+	* Send a sigbus, regardless of whether we were in kernel
+	* or user mode.
+	*/
+	tsk->thread.cp0_badvaddr = address;
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void __user *) address;
+	force_sig_info(SIGBUS, &info, tsk);
+	return;
+vmalloc_fault:
+	{
+		/*
+		* Synchronize this task's top level page-table
+		* with the 'reference' page table.
+		*
+		* Do _not_ use "tsk" here. We might be inside
+		* an interrupt in the middle of a task switch..
+		*/
+		int offset = __pgd_offset(address);
+		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+		pgd = (pgd_t *) pgd_current + offset;
+		pgd_k = init_mm.pgd + offset;
+
+		if (!pgd_present(*pgd_k))
+			goto no_context;
+		set_pgd(pgd, *pgd_k);
+
+		pud = pud_offset(pgd, address);
+		pud_k = pud_offset(pgd_k, address);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
+		if (!pmd_present(*pmd_k))
+			goto no_context;
+		set_pmd(pmd, *pmd_k);
+
+		pte_k = pte_offset_kernel(pmd_k, address);
+		if (!pte_present(*pte_k))
+			goto no_context;
+		return;
+	}
+}
diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
new file mode 100644
index 000000000000..4e3dcd0c4716
--- /dev/null
+++ b/arch/score/mm/init.c
@@ -0,0 +1,161 @@
+/*
+ * arch/score/mm/init.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/pagemap.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/initrd.h>
+
+#include <asm/sections.h>
+#include <asm/tlb.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long empty_zero_page;
+EXPORT_SYMBOL_GPL(empty_zero_page);
+
+static struct kcore_list kcore_mem, kcore_vmalloc;
+
+static unsigned long setup_zero_page(void)
+{
+	struct page *page;
+
+	empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, 0);
+	if (!empty_zero_page)
+		panic("Oh boy, that early out of memory?");
+
+	page = virt_to_page((void *) empty_zero_page);
+	SetPageReserved(page);
+
+	return 1UL;
+}
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+static int __init page_is_ram(unsigned long pagenr)
+{
+	if (pagenr >= min_low_pfn && pagenr < max_low_pfn)
+		return 1;
+	else
+		return 0;
+}
+
+void __init paging_init(void)
+{
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
+	unsigned long lastpfn;
+
+	pagetable_init();
+	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+	lastpfn = max_low_pfn;
+	free_area_init_nodes(max_zone_pfns);
+}
+
+void __init mem_init(void)
+{
+	unsigned long codesize, reservedpages, datasize, initsize;
+	unsigned long tmp, ram = 0;
+
+	max_mapnr = max_low_pfn;
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
+	totalram_pages += free_all_bootmem();
+	totalram_pages -= setup_zero_page();	/* Setup zeroed pages. */
+	reservedpages = 0;
+
+	for (tmp = 0; tmp < max_low_pfn; tmp++)
+		if (page_is_ram(tmp)) {
+			ram++;
+			if (PageReserved(pfn_to_page(tmp)))
+				reservedpages++;
+		}
+
+	num_physpages = ram;
+	codesize = (unsigned long) &_etext - (unsigned long) &_text;
+	datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+	initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+	kclist_add(&kcore_vmalloc, (void *) VMALLOC_START,
+			VMALLOC_END - VMALLOC_START);
+
+	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
+			"%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
+			(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+			ram << (PAGE_SHIFT-10), codesize >> 10,
+			reservedpages << (PAGE_SHIFT-10), datasize >> 10,
+			initsize >> 10,
+			(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+}
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+
+static void free_init_pages(const char *what, unsigned long begin, unsigned long end)
+{
+	unsigned long pfn;
+
+	for (pfn = PFN_UP(begin); pfn < PFN_DOWN(end); pfn++) {
+		struct page *page = pfn_to_page(pfn);
+		void *addr = phys_to_virt(PFN_PHYS(pfn));
+
+		ClearPageReserved(page);
+		init_page_count(page);
+		memset(addr, POISON_FREE_INITMEM, PAGE_SIZE);
+		__free_page(page);
+		totalram_pages++;
+	}
+	printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	free_init_pages("initrd memory",
+		virt_to_phys((void *) start),
+		virt_to_phys((void *) end));
+}
+#endif
+
+void __init_refok free_initmem(void)
+{
+	free_init_pages("unused kernel memory",
+	__pa(&__init_begin),
+	__pa(&__init_end));
+}
+
+unsigned long pgd_current;
+
+#define __page_aligned(order) __attribute__((__aligned__(PAGE_SIZE<<order)))
+
+/*
+ * gcc 3.3 and older have trouble determining that PTRS_PER_PGD and PGD_ORDER
+ * are constants.  So we use the variants from asm-offset.h until that gcc
+ * will officially be retired.
+ */
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned(PTE_ORDER);
+pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
diff --git a/arch/score/mm/pgtable.c b/arch/score/mm/pgtable.c
new file mode 100644
index 000000000000..6408bb73d3cc
--- /dev/null
+++ b/arch/score/mm/pgtable.c
@@ -0,0 +1,52 @@
+/*
+ * arch/score/mm/pgtable-32.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+
+void pgd_init(unsigned long page)
+{
+	unsigned long *p = (unsigned long *) page;
+	int i;
+
+	for (i = 0; i < USER_PTRS_PER_PGD; i += 8) {
+		p[i + 0] = (unsigned long) invalid_pte_table;
+		p[i + 1] = (unsigned long) invalid_pte_table;
+		p[i + 2] = (unsigned long) invalid_pte_table;
+		p[i + 3] = (unsigned long) invalid_pte_table;
+		p[i + 4] = (unsigned long) invalid_pte_table;
+		p[i + 5] = (unsigned long) invalid_pte_table;
+		p[i + 6] = (unsigned long) invalid_pte_table;
+		p[i + 7] = (unsigned long) invalid_pte_table;
+	}
+}
+
+void __init pagetable_init(void)
+{
+	/* Initialize the entire pgd. */
+	pgd_init((unsigned long)swapper_pg_dir);
+}
diff --git a/arch/score/mm/tlb-miss.S b/arch/score/mm/tlb-miss.S
new file mode 100644
index 000000000000..f27651914e8d
--- /dev/null
+++ b/arch/score/mm/tlb-miss.S
@@ -0,0 +1,199 @@
+/*
+ * arch/score/mm/tlbex.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/pgtable-bits.h>
+#include <asm/scoreregs.h>
+
+/*
+* After this macro runs, the pte faulted on is
+* in register PTE, a ptr into the table in which
+* the pte belongs is in PTR.
+*/
+	.macro	load_pte, pte, ptr
+	la	\ptr, pgd_current
+	lw	\ptr, [\ptr, 0]
+	mfcr	\pte, cr6
+	srli	\pte, \pte, 22
+	slli	\pte, \pte, 2
+	add	\ptr, \ptr, \pte
+	lw	\ptr, [\ptr, 0]
+	mfcr	\pte, cr6
+	srli	\pte, \pte, 10
+	andi	\pte, 0xffc
+	add	\ptr, \ptr, \pte
+	lw	\pte, [\ptr, 0]
+	.endm
+
+	.macro	pte_reload, ptr
+	lw	\ptr, [\ptr, 0]
+	mtcr	\ptr, cr12
+	nop
+	nop
+	nop
+	nop
+	nop
+	.endm
+
+	.macro do_fault, write
+	SAVE_ALL
+	mfcr	r6, cr6
+	mv	r4, r0
+	ldi	r5, \write
+	la	r8, do_page_fault
+	brl	r8
+	j	ret_from_exception
+	.endm
+
+	.macro	pte_writable, pte, ptr, label
+	andi	\pte, 0x280
+	cmpi.c	\pte, 0x280
+	bne	\label
+	lw	\pte, [\ptr, 0]		/*reload PTE*/
+	.endm
+
+/*
+ * Make PTE writable, update software status bits as well,
+ * then store at PTR.
+ */
+	.macro	pte_makewrite, pte, ptr
+	ori	\pte, 0x426
+	sw	\pte, [\ptr, 0]
+	.endm
+
+	.text
+ENTRY(score7_FTLB_refill_Handler)
+	la	r31, pgd_current	/* get pgd pointer */
+	lw	r31, [r31, 0]		/* get the address of PGD */
+	mfcr	r30, cr6
+	srli	r30, r30, 22		/* PGDIR_SHIFT = 22*/
+	slli	r30, r30, 2
+	add	r31, r31, r30
+	lw	r31, [r31, 0]		/* get the address of the start address of PTE table */
+
+	mfcr	r30, cr9
+	andi	r30, 0xfff 		/* equivalent to get PET index and right shift 2 bits */
+	add	r31, r31, r30
+	lw	r30, [r31, 0]		/* load pte entry */
+	mtcr	r30, cr12
+	nop
+	nop
+	nop
+	nop
+	nop
+	mtrtlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte				/* 6 cycles to make sure tlb entry works */
+
+ENTRY(score7_KSEG_refill_Handler)
+	la	r31, pgd_current	/* get pgd pointer */
+	lw	r31, [r31, 0]		/* get the address of PGD */
+	mfcr	r30, cr6
+	srli	r30, r30, 22		/* PGDIR_SHIFT = 22 */
+	slli	r30, r30, 2
+	add	r31, r31, r30
+	lw	r31, [r31, 0]		/* get the address of the start address of PTE table */
+
+	mfcr	r30, cr6		/* get Bad VPN */
+	srli	r30, r30, 10
+	andi	r30, 0xffc		/* PTE VPN mask (bit 11~2) */
+
+	add	r31, r31, r30
+	lw	r30, [r31, 0]		/* load pte entry */
+	mtcr	r30, cr12
+	nop
+	nop
+	nop
+	nop
+	nop
+	mtrtlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte				/* 6 cycles to make sure tlb entry works */
+
+nopage_tlbl:
+	do_fault	0		/* Read */
+
+ENTRY(handle_tlb_refill)
+	load_pte	r30, r31
+	pte_writable	r30, r31, handle_tlb_refill_nopage
+	pte_makewrite	r30, r31	/* Access|Modify|Dirty|Valid */
+	pte_reload	r31
+	mtrtlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte
+handle_tlb_refill_nopage:
+	do_fault	0		/* Read */
+
+ENTRY(handle_tlb_invaild)
+	load_pte	r30, r31
+	stlb				/* find faulting entry */
+	pte_writable	r30, r31, handle_tlb_invaild_nopage
+	pte_makewrite	r30, r31	/* Access|Modify|Dirty|Valid */
+	pte_reload	r31
+	mtptlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte
+handle_tlb_invaild_nopage:
+	do_fault	0		/* Read */
+
+ENTRY(handle_mod)
+	load_pte	r30, r31
+	stlb				/* find faulting entry */
+	andi	r30, _PAGE_WRITE	/* Writable? */
+	cmpz.c	r30
+	beq	nowrite_mod
+	lw	r30, [r31, 0]		/* reload into r30 */
+
+	/* Present and writable bits set, set accessed and dirty bits. */
+	pte_makewrite	r30, r31
+
+	/* Now reload the entry into the tlb. */
+	pte_reload	r31
+	mtptlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte
+
+nowrite_mod:
+	do_fault	1	/* Write */
diff --git a/arch/score/mm/tlb-score.c b/arch/score/mm/tlb-score.c
new file mode 100644
index 000000000000..4fa5aa5afecc
--- /dev/null
+++ b/arch/score/mm/tlb-score.c
@@ -0,0 +1,251 @@
+/*
+ * arch/score/mm/tlb-score.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/tlb.h>
+
+#define TLBSIZE 32
+
+unsigned long asid_cache = ASID_FIRST_VERSION;
+EXPORT_SYMBOL(asid_cache);
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags;
+	unsigned long old_ASID;
+	int entry;
+
+	local_irq_save(flags);
+	old_ASID = pevn_get() & ASID_MASK;
+	pectx_set(0);			/* invalid */
+	entry = tlblock_get();		/* skip locked entries*/
+
+	for (; entry < TLBSIZE; entry++) {
+		tlbpt_set(entry);
+		pevn_set(KSEG1);
+		barrier();
+		tlb_write_indexed();
+	}
+	pevn_set(old_ASID);
+	local_irq_restore(flags);
+}
+
+/*
+ * If mm is currently active_mm, we can't really drop it. Instead,
+ * we will get a new one for it.
+ */
+static inline void
+drop_mmu_context(struct mm_struct *mm)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	get_new_mmu_context(mm);
+	pevn_set(mm->context & ASID_MASK);
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm->context != 0)
+		drop_mmu_context(mm);
+}
+
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+	unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	unsigned long vma_mm_context = mm->context;
+	if (mm->context != 0) {
+		unsigned long flags;
+		int size;
+
+		local_irq_save(flags);
+		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+		if (size <= TLBSIZE) {
+			int oldpid = pevn_get() & ASID_MASK;
+			int newpid = vma_mm_context & ASID_MASK;
+
+			start &= PAGE_MASK;
+			end += (PAGE_SIZE - 1);
+			end &= PAGE_MASK;
+			while (start < end) {
+				int idx;
+
+				pevn_set(start | newpid);
+				start += PAGE_SIZE;
+				barrier();
+				tlb_probe();
+				idx = tlbpt_get();
+				pectx_set(0);
+				pevn_set(KSEG1);
+				if (idx < 0)
+					continue;
+				tlb_write_indexed();
+			}
+			pevn_set(oldpid);
+		} else {
+			/* Bigger than TLBSIZE, get new ASID directly */
+			get_new_mmu_context(mm);
+			if (mm == current->active_mm)
+				pevn_set(vma_mm_context & ASID_MASK);
+		}
+		local_irq_restore(flags);
+	}
+}
+
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	unsigned long flags;
+	int size;
+
+	local_irq_save(flags);
+	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	if (size <= TLBSIZE) {
+		int pid = pevn_get();
+
+		start &= PAGE_MASK;
+		end += PAGE_SIZE - 1;
+		end &= PAGE_MASK;
+
+		while (start < end) {
+			long idx;
+
+			pevn_set(start);
+			start += PAGE_SIZE;
+			tlb_probe();
+			idx = tlbpt_get();
+			if (idx < 0)
+				continue;
+			pectx_set(0);
+			pevn_set(KSEG1);
+			barrier();
+			tlb_write_indexed();
+		}
+		pevn_set(pid);
+	} else {
+		local_flush_tlb_all();
+	}
+
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	if (!vma || vma->vm_mm->context != 0) {
+		unsigned long flags;
+		int oldpid, newpid, idx;
+		unsigned long vma_ASID = vma->vm_mm->context;
+
+		newpid = vma_ASID & ASID_MASK;
+		page &= PAGE_MASK;
+		local_irq_save(flags);
+		oldpid = pevn_get() & ASID_MASK;
+		pevn_set(page | newpid);
+		barrier();
+		tlb_probe();
+		idx = tlbpt_get();
+		pectx_set(0);
+		pevn_set(KSEG1);
+		if (idx < 0)		/* p_bit(31) - 1: miss, 0: hit*/
+			goto finish;
+		barrier();
+		tlb_write_indexed();
+finish:
+		pevn_set(oldpid);
+		local_irq_restore(flags);
+	}
+}
+
+/*
+ * This one is only used for pages with the global bit set so we don't care
+ * much about the ASID.
+ */
+void local_flush_tlb_one(unsigned long page)
+{
+	unsigned long flags;
+	int oldpid, idx;
+
+	local_irq_save(flags);
+	oldpid = pevn_get();
+	page &= (PAGE_MASK << 1);
+	pevn_set(page);
+	barrier();
+	tlb_probe();
+	idx = tlbpt_get();
+	pectx_set(0);
+	if (idx >= 0) {
+		/* Make sure all entries differ. */
+		pevn_set(KSEG1);
+		barrier();
+		tlb_write_indexed();
+	}
+	pevn_set(oldpid);
+	local_irq_restore(flags);
+}
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	unsigned long flags;
+	int idx, pid;
+
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (current->active_mm != vma->vm_mm)
+		return;
+
+	pid = pevn_get() & ASID_MASK;
+
+	local_irq_save(flags);
+	address &= PAGE_MASK;
+	pevn_set(address | pid);
+	barrier();
+	tlb_probe();
+	idx = tlbpt_get();
+	pectx_set(pte_val(pte));
+	pevn_set(address | pid);
+	if (idx < 0)
+		tlb_write_random();
+	else
+		tlb_write_indexed();
+
+	pevn_set(pid);
+	local_irq_restore(flags);
+}
+
+void __cpuinit tlb_init(void)
+{
+	tlblock_set(0);
+	local_flush_tlb_all();
+	memcpy((void *)(EXCEPTION_VECTOR_BASE_ADDR + 0x100),
+			&score7_FTLB_refill_Handler, 0xFC);
+	flush_icache_range(EXCEPTION_VECTOR_BASE_ADDR + 0x100,
+			EXCEPTION_VECTOR_BASE_ADDR + 0x1FC);
+}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e2bdd7b94fd9..4df3570fe511 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -10,12 +10,17 @@ config SUPERH
 	select EMBEDDED
 	select HAVE_CLK
 	select HAVE_IDE
+	select HAVE_LMB
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_PERF_COUNTERS
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
+	select HAVE_SYSCALL_TRACEPOINTS
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	help
@@ -31,6 +36,9 @@ config SUPERH32
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FTRACE_SYSCALLS
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 
@@ -212,6 +220,8 @@ config CPU_SHX3
 config ARCH_SHMOBILE
 	bool
 	select ARCH_SUSPEND_POSSIBLE
+	select PM
+	select PM_RUNTIME
 
 if SUPERH32
 
@@ -389,6 +399,13 @@ config CPU_SUBTYPE_SH7724
 	help
 	  Select SH7724 if you have an SH-MobileR2R CPU.
 
+config CPU_SUBTYPE_SH7757
+	bool "Support SH7757 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	help
+	  Select SH7757 if you have a SH4A SH7757 CPU.
+
 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
@@ -751,12 +768,31 @@ config UBC_WAKEUP
 
 	  If unsure, say N.
 
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
+choice
+	prompt "Kernel command line"
+	optional
+	default CMDLINE_OVERWRITE
+	help
+	  Setting this option allows the kernel command line arguments
+	  to be set.
+
+config CMDLINE_OVERWRITE
+	bool "Overwrite bootloader kernel arguments"
+	help
+	  Given string will overwrite any arguments passed in by
+	  a bootloader.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  Given string will be concatenated with arguments passed in
+	  by a bootloader.
+
+endchoice
 
 config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
+	string "Kernel command line arguments string"
+	depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
 	default "console=ttySC1,115200"
 
 endmenu
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 39224b57c6ef..55907af1dc25 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -38,11 +38,13 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
 				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
 				CPU_SUBTYPE_SH7343
-	default "0xffea0000" if CPU_SUBTYPE_SH7785
+	default "0xfe4c0000" if CPU_SUBTYPE_SH7757
+	default "0xffeb0000" if CPU_SUBTYPE_SH7785
 	default "0xffeb0000" if CPU_SUBTYPE_SH7786
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
 	default "0xffe80000" if CPU_SH4
+	default "0xa4000150" if CPU_SH3
 	default "0x00000000"
 
 config EARLY_PRINTK
@@ -61,12 +63,14 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_STACKOVERFLOW
+config STACK_DEBUG
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
 	help
 	  This option will cause messages to be printed if free stack space
-	  drops below a certain limit.
+	  drops below a certain limit. Saying Y here will add overhead to
+	  every function call and will therefore incur a major
+	  performance hit. Most users should say N.
 
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
@@ -107,6 +111,14 @@ config DUMP_CODE
 
 	  Those looking for more verbose debugging output should say Y.
 
+config DWARF_UNWINDER
+	bool "Enable the DWARF unwinder for stacktraces"
+	select FRAME_POINTER
+	default n
+	help
+	  Enabling this option will make stacktraces more accurate, at
+	  the cost of an increase in overall kernel size.
+
 config SH_NO_BSS_INIT
 	bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
 	depends on DEBUG_KERNEL
@@ -123,4 +135,9 @@ config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
 	depends on SUPERH64
 
+config MCOUNT
+	def_bool y
+	depends on SUPERH32
+	depends on STACK_DEBUG || FUNCTION_TRACER
+
 endmenu
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 75d049b03f7e..fc51a918b31a 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -136,6 +136,8 @@ machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_KFR2R09)			+= mach-kfr2r09
+machdir-$(CONFIG_SH_ECOVEC)			+= mach-ecovec24
 machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
 machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
 machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
@@ -186,17 +188,27 @@ KBUILD_CFLAGS		+= -pipe $(cflags-y)
 KBUILD_CPPFLAGS		+= $(cflags-y)
 KBUILD_AFLAGS		+= $(cflags-y)
 
+ifeq ($(CONFIG_MCOUNT),y)
+  KBUILD_CFLAGS += -pg
+endif
+
+ifeq ($(CONFIG_DWARF_UNWINDER),y)
+  KBUILD_CFLAGS += -fasynchronous-unwind-tables
+endif
+
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-PHONY += maketools FORCE
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+	       zImage vmlinux.srec romImage
+PHONY += maketools $(BOOT_TARGETS) FORCE
 
 maketools:  include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
 
 all: $(KBUILD_IMAGE)
 
-zImage uImage uImage.srec vmlinux.srec: vmlinux
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 compressed: zImage
@@ -208,10 +220,14 @@ archclean:
 	$(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
 
 define archhelp
-	@echo '* zImage 	           - Compressed kernel image'
+	@echo '  zImage 	           - Compressed kernel image'
+	@echo '  romImage	           - Compressed ROM image, if supported'
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
-	@echo '  uImage  	           - Create a bootable image for U-Boot'
-	@echo '  uImage.srec  	           - Create an S-record for U-Boot'
+	@echo '* uImage  	           - Alias to bootable U-Boot image'
+	@echo '  uImage.srec	           - Create an S-record for U-Boot'
+	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
+	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
+	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
 endef
 
 CLEAN_FILES += include/asm-sh/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 2b1af0eefa6a..aedd9deb5de2 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -160,7 +160,6 @@ config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED if MMU
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
@@ -171,6 +170,13 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
 	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 	  you can access all on-board device in 29bit address mode.
 
+config SH_SH7785LCR_PT
+	bool "SH7785LCR prototype board on 32-bit MMU mode"
+	depends on SH_SH7785LCR && 32BIT
+	default n
+	help
+	  If you use prototype board, this option is enabled.
+
 config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
@@ -193,6 +199,20 @@ config SH_AP325RXA
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
 
+config SH_KFR2R09
+	bool "KFR2R09"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  "Kit For R2R for 2009" support.
+
+config SH_ECOVEC
+	bool "EcoVec"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
+
 config SH_SH7763RDP
 	bool "SH7763RDP"
 	depends on CPU_SUBTYPE_SH7763
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index b9c88cc519e2..327d47c25a57 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -188,7 +188,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.name = "LB070WV1",
 			.xres = 800,
 			.yres = 480,
-			.left_margin = 40,
+			.left_margin = 32,
 			.right_margin = 160,
 			.hsync_len = 8,
 			.upper_margin = 63,
@@ -211,7 +211,7 @@ static struct resource lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -227,6 +227,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static void camera_power(int val)
@@ -377,6 +380,9 @@ static struct platform_device ceu_device = {
 	.dev		= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn3_platform_data = {
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 42410a15d255..e5a8a2fde39c 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -223,6 +223,19 @@ static struct platform_device sm501_device = {
 	.resource	= sm501_resources,
 };
 
+static struct resource i2c_proto_resources[] = {
+	[0] = {
+		.start	= PCA9564_PROTO_32BIT_ADDR,
+		.end	= PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct resource i2c_resources[] = {
 	[0] = {
 		.start	= PCA9564_ADDR,
@@ -271,6 +284,11 @@ static int __init sh7785lcr_devices_setup(void)
 	i2c_register_board_info(0, sh7785lcr_i2c_devices,
 				ARRAY_SIZE(sh7785lcr_i2c_devices));
 
+	if (mach_is_sh7785lcr_pt()) {
+		i2c_device.resource = i2c_proto_resources;
+		i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
+	}
+
 	return platform_add_devices(sh7785lcr_devices,
 				    ARRAY_SIZE(sh7785lcr_devices));
 }
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
new file mode 100644
index 000000000000..51f852151655
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the R0P7724LC0011/21RL (EcoVec)
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 000000000000..96bc1698310f
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,670 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/sh_keysc.h>
+#include <asm/clock.h>
+#include <cpu/sh7724.h>
+
+/*
+ *  Address      Interface        BusWidth
+ *-----------------------------------------
+ *  0x0000_0000  uboot            16bit
+ *  0x0004_0000  Linux romImage   16bit
+ *  0x0014_0000  MTD for Linux    16bit
+ *  0x0400_0000  Internal I/O     16/32bit
+ *  0x0800_0000  DRAM             32bit
+ *  0x1800_0000  MFI              16bit
+ */
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+	.nr_bits = 4,
+	.bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = 0xA405012C, /* PTG */
+		.end    = 0xA405012E - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "boot loader",
+		.offset = 0,
+		.size = (5 * 1024 * 1024),
+		.mask_flags = MTD_CAP_ROM,
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8700 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+/* USB0 host */
+void usb0_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+	.on_chip = 1,
+	.port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_host_resources),
+	.resource	= usb0_host_resources,
+};
+
+/*
+ * USB1
+ *
+ * CN5 can use both host/function,
+ * and we can determine it by checking PTB[3]
+ *
+ * This time only USB1 host is supported.
+ */
+void usb1_port_power(int port, int power)
+{
+	if (!gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_ERR "USB1 function is not supported\n");
+		return;
+	}
+
+	gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+	.on_chip = 1,
+	.port_power = usb1_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb1_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_host_resources),
+	.resource	= usb1_host_resources,
+};
+
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.interface_type = RGB18,
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.lcd_cfg = {
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 63,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
+};
+
+/* I2C device */
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 50,
+	.kycr2_delay	= 100,
+	.keycodes	= { KEY_1, 0, 0, 0, 0,
+			    KEY_2, 0, 0, 0, 0,
+			    KEY_3, 0, 0, 0, 0,
+			    KEY_4, 0, 0, 0, 0,
+			    KEY_5, 0, 0, 0, 0,
+			    KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
+};
+
+static struct platform_device *ecovec_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&sh_eth_device,
+	&usb0_host_device,
+	&usb1_host_device, /* USB1 host support */
+	&lcdc_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+};
+
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+	struct i2c_msg msg[2];
+	u8 buf;
+	int ret;
+
+	msg[0].addr  = EEPROM_ADDR;
+	msg[0].flags = 0;
+	msg[0].len   = 1;
+	msg[0].buf   = &command;
+
+	msg[1].addr  = EEPROM_ADDR;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len   = 1;
+	msg[1].buf   = &buf;
+
+	ret = i2c_transfer(a, msg, 2);
+	if (ret < 0) {
+		printk(KERN_ERR "error %d\n", ret);
+		buf = 0xff;
+	}
+
+	return buf;
+}
+
+#define MAC_LEN 6
+static void __init sh_eth_init(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(1);
+	struct clk *eth_clk;
+	u8 mac[MAC_LEN];
+	int i;
+
+	if (!a) {
+		pr_err("can not get I2C 1\n");
+		return;
+	}
+
+	eth_clk = clk_get(NULL, "eth0");
+	if (!eth_clk) {
+		pr_err("can not get eth0 clk\n");
+		return;
+	}
+
+	/* read MAC address frome EEPROM */
+	for (i = 0; i < MAC_LEN; i++) {
+		mac[i] = mac_read(a, 0x10 + i);
+		msleep(10);
+	}
+
+	/* clock enable */
+	clk_enable(eth_clk);
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl((mac[0] << 24) |
+		  (mac[1] << 16) |
+		  (mac[2] <<  8) |
+		  (mac[3] <<  0), SH_ETH_MAHR);
+	ctrl_outl((mac[4] <<  8) |
+		  (mac[5] <<  0), SH_ETH_MALR);
+
+	clk_put(eth_clk);
+}
+
+#define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
+static int __init arch_setup(void)
+{
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+
+	/* enable debug LED */
+	gpio_request(GPIO_PTG0, NULL);
+	gpio_request(GPIO_PTG1, NULL);
+	gpio_request(GPIO_PTG2, NULL);
+	gpio_request(GPIO_PTG3, NULL);
+	gpio_direction_output(GPIO_PTG0, 0);
+	gpio_direction_output(GPIO_PTG1, 0);
+	gpio_direction_output(GPIO_PTG2, 0);
+	gpio_direction_output(GPIO_PTG3, 0);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+
+	/* enable SH-Eth */
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_output(GPIO_PTA1, 1);
+	mdelay(20);
+
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_FN_LNKSTA,       NULL);
+
+	/* enable USB */
+	ctrl_outw(0x0000, 0xA4D80000);
+	ctrl_outw(0x0000, 0xA4D90000);
+	gpio_request(GPIO_PTB3,  NULL);
+	gpio_request(GPIO_PTB4,  NULL);
+	gpio_request(GPIO_PTB5,  NULL);
+	gpio_direction_input(GPIO_PTB3);
+	gpio_direction_output(GPIO_PTB4, 0);
+	gpio_direction_output(GPIO_PTB5, 0);
+	ctrl_outw(0x0600, 0xa40501d4);
+	ctrl_outw(0x0600, 0xa4050192);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	gpio_request(GPIO_PTE6, NULL);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_request(GPIO_PTR1, NULL);
+	gpio_request(GPIO_PTA2, NULL);
+	gpio_direction_input(GPIO_PTE6);
+	gpio_direction_output(GPIO_PTU1, 0);
+	gpio_direction_output(GPIO_PTR1, 0);
+	gpio_direction_output(GPIO_PTA2, 0);
+
+	/* I/O buffer drive ability is low */
+	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+
+	if (gpio_get_value(GPIO_PTE6)) {
+		/* DVI */
+		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].clock_divider		= 1,
+		lcdc_info.ch[0].lcd_cfg.name		= "DVI";
+		lcdc_info.ch[0].lcd_cfg.xres		= 1280;
+		lcdc_info.ch[0].lcd_cfg.yres		= 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTA2, 1);
+		gpio_set_value(GPIO_PTU1, 1);
+	} else {
+		/* Panel */
+
+		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+		lcdc_info.ch[0].clock_divider		= 2,
+		lcdc_info.ch[0].lcd_cfg.name		= "Panel";
+		lcdc_info.ch[0].lcd_cfg.xres		= 800;
+		lcdc_info.ch[0].lcd_cfg.yres		= 480;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 70;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTR1, 1);
+
+		/* FIXME
+		 *
+		 * LCDDON control is needed for Panel,
+		 * but current sh_mobile_lcdc driver doesn't control it.
+		 * It is temporary correspondence
+		 */
+		gpio_request(GPIO_PTF4, NULL);
+		gpio_direction_output(GPIO_PTF4, 1);
+	}
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+
+	/* enable user debug switch */
+	gpio_request(GPIO_PTR0, NULL);
+	gpio_request(GPIO_PTR4, NULL);
+	gpio_request(GPIO_PTR5, NULL);
+	gpio_request(GPIO_PTR6, NULL);
+	gpio_direction_input(GPIO_PTR0);
+	gpio_direction_input(GPIO_PTR4);
+	gpio_direction_input(GPIO_PTR5);
+	gpio_direction_input(GPIO_PTR6);
+
+	/* enable I2C device */
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+	return platform_add_devices(ecovec_devices,
+				    ARRAY_SIZE(ecovec_devices));
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	sh_eth_init();
+	return 0;
+}
+device_initcall(devices_setup);
+
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+	.mv_name	= "R0P7724 (EcoVec)",
+};
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 1639f8915000..566e69d8d729 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
@@ -60,6 +61,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -81,6 +87,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
new file mode 100644
index 000000000000..5d5867826e3b
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	+=  lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
new file mode 100644
index 000000000000..8ccb1cc8b589
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -0,0 +1,332 @@
+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+	0x02, /* WEMODE: 1=cont, 0=one-shot */
+	0x00, 0x00,
+	0x00, /* EPF, DFM */
+	0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+	0x0b,
+	0x63, /* 400 lines */
+	0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+	0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+	0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+	0x01, 0x02, 0x08, 0x23,	0x03, 0x0c, 0x00, 0x06,	0x00, 0x00,
+	0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+	0x07, 0xc5, 0xdc, 0x02,	0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+			      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so,
+		      int i, unsigned long v)
+{
+	if (i)
+		so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+	else
+		so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so,
+		       unsigned char const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i++)
+		write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+				      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long device_code;
+
+	/* access protect OFF */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* deep standby OFF */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* device code command */
+	write_reg(sohandle, so, 0, 0xbf);
+	mdelay(50);
+
+	/* dummy read */
+	read_reg(sohandle, so);
+
+	/* read device code */
+	device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+	device_code |= (read_reg(sohandle, so) & 0xff);
+
+	return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+			       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	int i;
+
+	/* write start */
+	write_memory_start(sohandle, so);
+
+	/* paint it black */
+	for (i = 0; i < (240 * 400); i++)
+		write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* access protect off */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* exit deep standby mode */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* frame memory I/F */
+	write_reg(sohandle, so, 0, 0xb3);
+	write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+	/* display mode and frame memory write mode */
+	write_reg(sohandle, so, 0, 0xb4);
+	write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+	/* panel */
+	write_reg(sohandle, so, 0, 0xc0);
+	write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+	/* timing (normal) */
+	write_reg(sohandle, so, 0, 0xc1);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (partial) */
+	write_reg(sohandle, so, 0, 0xc2);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (idle) */
+	write_reg(sohandle, so, 0, 0xc3);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (source/VCOM/gate driving) */
+	write_reg(sohandle, so, 0, 0xc4);
+	write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+	/* gamma (red) */
+	write_reg(sohandle, so, 0, 0xc8);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (green) */
+	write_reg(sohandle, so, 0, 0xc9);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (blue) */
+	write_reg(sohandle, so, 0, 0xca);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* power (common) */
+	write_reg(sohandle, so, 0, 0xd0);
+	write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+	/* VCOM */
+	write_reg(sohandle, so, 0, 0xd1);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x0f);
+	write_reg(sohandle, so, 1, 0x02);
+
+	/* power (normal) */
+	write_reg(sohandle, so, 0, 0xd2);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (partial) */
+	write_reg(sohandle, so, 0, 0xd3);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (idle) */
+	write_reg(sohandle, so, 0, 0xd4);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	write_reg(sohandle, so, 0, 0xd8);
+	write_reg(sohandle, so, 1, 0x77);
+	write_reg(sohandle, so, 1, 0x77);
+
+	/* TE signal */
+	write_reg(sohandle, so, 0, 0x35);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* TE signal line */
+	write_reg(sohandle, so, 0, 0x44);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* column address */
+	write_reg(sohandle, so, 0, 0x2a);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0xef);
+
+	/* page address */
+	write_reg(sohandle, so, 0, 0x2b);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x01);
+	write_reg(sohandle, so, 1, 0x8f);
+
+	/* exit sleep mode */
+	write_reg(sohandle, so, 0, 0x11);
+
+	mdelay(120);
+
+	/* clear vram */
+	clear_memory(sohandle, so);
+
+	/* display ON */
+	write_reg(sohandle, so, 0, 0x29);
+	mdelay(1);
+
+	write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *board_data, void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* power on */
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	gpio_set_value(GPIO_PTE4, 0);  /* LCD_RST/ -> L */
+	gpio_set_value(GPIO_PTF4, 1);  /* PROTECT/ -> H */
+	udelay(1100);
+	gpio_set_value(GPIO_PTE4, 1);  /* LCD_RST/ -> H */
+	udelay(10);
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	mdelay(20);
+
+	if (read_device_code(sohandle, so) != 0x01221517)
+		return -ENODEV;
+
+	pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+	display_on(sohandle, so);
+	return 0;
+}
+
+#define CTRL_CKSW       0x10
+#define CTRL_C10        0x20
+#define CTRL_CPSW       0x80
+#define MAIN_MLED4      0x40
+#define MAIN_MSW        0x80
+
+static int kfr2r09_lcd_backlight(int on)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	buf[0] = 0x00;
+	if (on)
+		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0x01;
+	if (on)
+		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+void kfr2r09_lcd_on(void *board_data)
+{
+	kfr2r09_lcd_backlight(1);
+}
+
+void kfr2r09_lcd_off(void *board_data)
+{
+	kfr2r09_lcd_backlight(0);
+}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
new file mode 100644
index 000000000000..c08d33fe2104
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -0,0 +1,386 @@
+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/usb/r8a66597.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
+
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+	{
+		.name = "boot",
+		.offset = 0,
+		.size = (4 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+	.width		= 2,
+	.parts		= kfr2r09_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= kfr2r09_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nor_flash_resources),
+	.dev		= {
+		.platform_data = &kfr2r09_nor_flash_data,
+	},
+};
+
+static struct resource kfr2r09_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x10000000,
+		.end		= 0x1001ffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+	.name		= "onenand-flash",
+	.resource	= kfr2r09_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
+static struct sh_keysc_info kfr2r09_sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 10,
+	.keycodes = {
+		KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
+		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
+		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
+		KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
+		KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
+		0, 0, 0, 0, 0
+	},
+};
+
+static struct resource kfr2r09_sh_keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
+	.resource       = kfr2r09_sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_keysc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
+};
+
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS18,
+		.clock_divider = 6,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_cfg = {
+			.name = "TX07D34VM0AAA",
+			.xres = 240,
+			.yres = 400,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 0,
+			.lower_margin = 1,
+			.vsync_len = 1,
+			.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		},
+		.lcd_size_cfg = {
+			.width = 35,
+			.height = 58,
+		},
+		.board_cfg = {
+			.setup_sys = kfr2r09_lcd_setup,
+			.display_on = kfr2r09_lcd_on,
+			.display_off = kfr2r09_lcd_off,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x07010904,
+			.ldmt3r = 0x14012914,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+	.resource	= kfr2r09_sh_lcdc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_lcdc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
+};
+
+static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource kfr2r09_usb0_gadget_resources[] = {
+	[0] = {
+		.start	= 0x04d80000,
+		.end	= 0x04d80123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device kfr2r09_usb0_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data	= &kfr2r09_usb0_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
+	.resource	= kfr2r09_usb0_gadget_resources,
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+	&kfr2r09_nor_flash_device,
+	&kfr2r09_nand_flash_device,
+	&kfr2r09_sh_keysc_device,
+	&kfr2r09_sh_lcdc_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
+#define PORT_MSELCRB 0xa4050182
+
+#ifdef CONFIG_I2C
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 1);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+#else
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	return -ENODEV;
+}
+#endif
+
+static int kfr2r09_usb0_gadget_setup(void)
+{
+	int plugged_in;
+
+	gpio_request(GPIO_PTN4, NULL); /* USB_DET */
+	gpio_direction_input(GPIO_PTN4);
+	plugged_in = gpio_get_value(GPIO_PTN4);
+	if (!plugged_in)
+		return -ENODEV; /* no cable plugged in */
+
+	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
+		return -ENODEV; /* unable to configure using i2c */
+
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
+	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
+	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
+	msleep(20); /* wait 20ms to let the clock settle */
+	clk_enable(clk_get(NULL, "usb0"));
+	ctrl_outw(0x0600, 0xa40501d4);
+
+	return 0;
+}
+
+static int __init kfr2r09_devices_setup(void)
+{
+	/* enable SCIF1 serial port for YC401 console support */
+	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+
+	/* setup NOR flash at CS0 */
+	ctrl_outl(0x36db0400, BSC_CS0BCR);
+	ctrl_outl(0x00000500, BSC_CS0WCR);
+
+	/* setup NAND flash at CS4 */
+	ctrl_outl(0x36db0400, BSC_CS4BCR);
+	ctrl_outl(0x00000500, BSC_CS4WCR);
+
+	/* setup KEYSC pins */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN0, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* setup LCDC pins for SYS panel */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+	gpio_direction_output(GPIO_PTE4, 1);
+	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+	gpio_direction_output(GPIO_PTF4, 1);
+	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* setup USB function */
+	if (kfr2r09_usb0_gadget_setup() == 0)
+		platform_device_register(&kfr2r09_usb0_gadget_device);
+
+	return platform_add_devices(kfr2r09_devices,
+				    ARRAY_SIZE(kfr2r09_devices));
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+	.mv_name		= "kfr2r09",
+	.mv_mode_pins		= kfr2r09_mode_pins,
+};
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f9b2e4df35b9..6ed1fd32369e 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -98,6 +98,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct mtd_partition migor_nor_flash_partitions[] =
@@ -276,7 +279,7 @@ static struct resource migor_lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -292,6 +295,9 @@ static struct platform_device migor_lcdc_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static struct clk *camera_clk;
@@ -379,6 +385,9 @@ static struct platform_device migor_ceu_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn9_platform_data = {
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index af84904ed86f..36374078e521 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -22,6 +22,7 @@
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
+#include <cpu/sh7722.h>
 
 /* Heartbeat */
 static struct heartbeat_data heartbeat_data = {
@@ -137,6 +138,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct platform_device *se7722_devices[] __initdata = {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 15456a0773bf..00973e0f8c63 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -39,7 +39,15 @@
  * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
  *                          1 : Digital monitor
  *                      b = 0 : VGA
- *                          1 : SVGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
  */
 
 /* Heartbeat */
@@ -158,7 +166,7 @@ static struct resource lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000,
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -174,6 +182,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 /* CEU0 */
@@ -205,6 +216,9 @@ static struct platform_device ceu0_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu0_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
 };
 
 /* CEU1 */
@@ -236,6 +250,9 @@ static struct platform_device ceu1_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu1_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
 };
 
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
@@ -274,6 +291,9 @@ static struct platform_device keysc_device = {
 	.dev	= {
 		.platform_data	= &keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 /* SH Eth */
@@ -302,15 +322,19 @@ static struct platform_device sh_eth_device = {
 	},
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
 	.resource = sh_eth_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_ETHER,
+	},
 };
 
 static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
 };
 
 static struct resource sh7724_usb0_host_resources[] = {
 	[0] = {
 		.start	= 0xa4d80000,
-		.end	= 0xa4d800ff,
+		.end	= 0xa4d80124 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -330,6 +354,38 @@ static struct platform_device sh7724_usb0_host_device = {
 	},
 	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
 	.resource	= sh7724_usb0_host_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USB0,
+	},
+};
+
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 1, /* USB1 */
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb1_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb1_gadget_resources),
+	.resource	= sh7724_usb1_gadget_resources,
 };
 
 static struct platform_device *ms7724se_devices[] __initdata = {
@@ -342,6 +398,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&keysc_device,
 	&sh_eth_device,
 	&sh7724_usb0_host_device,
+	&sh7724_usb1_gadget_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -421,9 +478,38 @@ static int __init devices_setup(void)
 	/* turn on USB clocks, use external clock */
 	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 
+#ifdef CONFIG_PM
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
+	/* Lit LED9 */
+	gpio_request(GPIO_PTJ6, NULL);
+	gpio_direction_output(GPIO_PTJ6, 1);
+	gpio_export(GPIO_PTJ6, 0);
+
+	/* Lit LED10 */
+	gpio_request(GPIO_PTJ5, NULL);
+	gpio_direction_output(GPIO_PTJ5, 1);
+	gpio_export(GPIO_PTJ5, 0);
+
+	/* Lit LED11 */
+	gpio_request(GPIO_PTJ7, NULL);
+	gpio_direction_output(GPIO_PTJ7, 1);
+	gpio_export(GPIO_PTJ7, 0);
+#endif
+
 	/* enable USB0 port */
 	ctrl_outw(0x0600, 0xa40501d4);
 
+	/* enable USB1 port */
+	ctrl_outw(0x0600, 0xa4050192);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -546,15 +632,15 @@ static int __init devices_setup(void)
 	sh_eth_init();
 
 	if (sw & SW41_B) {
-		/* SVGA */
-		lcdc_info.ch[0].lcd_cfg.xres         = 800;
-		lcdc_info.ch[0].lcd_cfg.yres         = 600;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+		/* 720p */
+		lcdc_info.ch[0].lcd_cfg.xres         = 1280;
+		lcdc_info.ch[0].lcd_cfg.yres         = 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 5;
 	} else {
 		/* VGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 640;
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 8913ae39a802..efe4cb9f8a77 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -89,6 +90,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -109,6 +115,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,
diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore
index aad5edddf93b..541087d2029c 100644
--- a/arch/sh/boot/.gitignore
+++ b/arch/sh/boot/.gitignore
@@ -1,4 +1,3 @@
 zImage
-vmlinux.srec
-uImage
-uImage.srec
+vmlinux*
+uImage*
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 78efb04c28f3..a1316872be6f 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -20,8 +20,13 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
-targets := zImage vmlinux.srec uImage uImage.srec
-subdir- := compressed
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
+subdir- := compressed romimage
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -30,6 +35,13 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
+$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/romimage $@
+
 KERNEL_MEMORY := 0x00000000
 ifeq ($(CONFIG_PMB_FIXED),y)
 KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
@@ -40,9 +52,6 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_MEMORY_START)]')
 endif
 
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY
-
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(KERNEL_MEMORY) + \
@@ -55,19 +64,30 @@ KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+		   -C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
-$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
-
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
 OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
 $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
 	$(call if_changed,objcopy)
@@ -76,5 +96,9 @@ OBJCOPYFLAGS_uImage.srec := -I binary -O srec
 $(obj)/uImage.srec: $(obj)/uImage
 	$(call if_changed,objcopy)
 
-clean-files	+= uImage uImage.srec vmlinux.srec \
-		   vmlinux.bin vmlinux.bin.gz
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'
+
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y
diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore
new file mode 100644
index 000000000000..2374a83d87b2
--- /dev/null
+++ b/arch/sh/boot/compressed/.gitignore
@@ -0,0 +1 @@
+vmlinux.bin.*
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 9531bf1b7c2f..6182eca5180a 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -5,9 +5,10 @@
 #
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
-		   head_$(BITS).o misc_$(BITS).o piggy.o
+		   vmlinux.bin.bz2 vmlinux.bin.lzma \
+		   head_$(BITS).o misc.o piggy.o
 
-OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o
+OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
 
 ifdef CONFIG_SH_STANDARD_BIOS
 OBJECTS += $(obj)/../../kernel/sh_bios.o
@@ -23,7 +24,7 @@ IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ifeq ($(CONFIG_MCOUNT),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
@@ -38,10 +39,18 @@ $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzma)
 
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,as_o_S)
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
+	$(call if_changed,ld)
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
index 06ac31f3be88..02a30935f0b9 100644
--- a/arch/sh/boot/compressed/head_32.S
+++ b/arch/sh/boot/compressed/head_32.S
@@ -22,7 +22,7 @@ startup:
 	bt	clear_bss
 	sub	r0, r2
 	mov.l	bss_start_addr, r0
-	mov	#0xe0, r1
+	mov	#0xffffffe0, r1
 	and	r1, r0			! align cache line
 	mov.l	text_start_addr, r3
 	mov	r0, r1
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
new file mode 100644
index 000000000000..fd56a71ca9d9
--- /dev/null
+++ b/arch/sh/boot/compressed/misc.c
@@ -0,0 +1,149 @@
+/*
+ * arch/sh/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for SH by Stuart Menefy, Aug 1999
+ *
+ * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
+ */
+
+#include <asm/uaccess.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/sh_bios.h>
+
+/*
+ * gzip declarations
+ */
+
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n)     memset ((s), 0, (n))
+
+/* cache.c */
+#define CACHE_ENABLE      0
+#define CACHE_DISABLE     1
+int cache_control(unsigned int command);
+
+extern char input_data[];
+extern int input_len;
+static unsigned char *output;
+
+static void error(char *m);
+
+int puts(const char *);
+
+extern int _text;		/* Defined in vmlinux.lds.S */
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+#ifdef CONFIG_HAVE_KERNEL_BZIP2
+#define HEAP_SIZE	0x400000
+#else
+#define HEAP_SIZE	0x10000
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+size_t strlen(const char *s)
+{
+	int i = 0;
+
+	while (*s++)
+		i++;
+	return i;
+}
+
+int puts(const char *s)
+{
+	int len = strlen(s);
+	sh_bios_console_write(s, len);
+	return len;
+}
+#else
+int puts(const char *s)
+{
+	/* This should be updated to use the sh-sci routines */
+	return 0;
+}
+#endif
+
+void* memset(void* s, int c, size_t n)
+{
+	int i;
+	char *ss = (char*)s;
+
+	for (i=0;i<n;i++) ss[i] = c;
+	return s;
+}
+
+void* memcpy(void* __dest, __const void* __src,
+			    size_t __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i=0;i<__n;i++) d[i] = s[i];
+	return __dest;
+}
+
+static void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	while(1);	/* Halt */
+}
+
+#ifdef CONFIG_SUPERH64
+#define stackalign	8
+#else
+#define stackalign	4
+#endif
+
+#define STACK_SIZE (4096)
+long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+	unsigned long output_addr;
+
+#ifdef CONFIG_SUPERH64
+	output_addr = (CONFIG_MEMORY_START + 0x2000);
+#else
+	output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
+#ifdef CONFIG_29BIT
+	output_addr |= P2SEG;
+#endif
+#endif
+
+	output = (unsigned char *)output_addr;
+	free_mem_ptr = (unsigned long)&_end;
+	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+	puts("Uncompressing Linux... ");
+	cache_control(CACHE_ENABLE);
+	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+	cache_control(CACHE_DISABLE);
+	puts("Ok, booting the kernel.\n");
+}
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
deleted file mode 100644
index efdba6b29572..000000000000
--- a/arch/sh/boot/compressed/misc_32.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * arch/sh/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SH by Stuart Menefy, Aug 1999
- *
- * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
- */
-
-#include <asm/uaccess.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#ifdef CONFIG_SH_STANDARD_BIOS
-#include <asm/sh_bios.h>
-#endif
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-static unsigned insize = 0;  /* valid bytes in inbuf */
-static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-
-extern char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _text;		/* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#define HEAP_SIZE             0x10000
-
-#include "../../../../lib/inflate.c"
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-size_t strlen(const char *s)
-{
-	int i = 0;
-
-	while (*s++)
-		i++;
-	return i;
-}
-
-int puts(const char *s)
-{
-	int len = strlen(s);
-	sh_bios_console_write(s, len);
-	return len;
-}
-#else
-int puts(const char *s)
-{
-	/* This should be updated to use the sh-sci routines */
-	return 0;
-}
-#endif
-
-void* memset(void* s, int c, size_t n)
-{
-	int i;
-	char *ss = (char*)s;
-
-	for (i=0;i<n;i++) ss[i] = c;
-	return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
-			    size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i=0;i<__n;i++) d[i] = s[i];
-	return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-#define STACK_SIZE (4096)
-long user_stack [STACK_SIZE];
-long* stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
-	output_data = NULL;
-	output_ptr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
-#ifdef CONFIG_29BIT
-	output_ptr |= P2SEG;
-#endif
-	free_mem_ptr = (unsigned long)&_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
-	makecrc();
-	puts("Uncompressing Linux... ");
-	gunzip();
-	puts("Ok, booting the kernel.\n");
-}
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
deleted file mode 100644
index 2941657e18aa..000000000000
--- a/arch/sh/boot/compressed/misc_64.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * arch/sh/boot/compressed/misc_64.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SHmedia from sh by Stuart Menefy, May 2002
- */
-
-#include <asm/uaccess.h>
-
-/* cache.c */
-#define CACHE_ENABLE      0
-#define CACHE_DISABLE     1
-int cache_control(unsigned int command);
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;		/* input buffer */
-static uch window[WSIZE];	/* Sliding window buffer */
-
-static unsigned insize = 0;	/* valid bytes in inbuf */
-static unsigned inptr = 0;	/* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;	/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01	/* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02	/* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04	/* bit 2 set: extra field present */
-#define ORIG_NAME    0x08	/* bit 3 set: original file name present */
-#define COMMENT      0x10	/* bit 4 set: file comment present */
-#define ENCRYPTED    0x20	/* bit 5 set: file is encrypted */
-#define RESERVED     0xC0	/* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-
-extern char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
-static void error(char *m);
-
-static void puts(const char *);
-
-extern int _text;		/* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#define HEAP_SIZE             0x10000
-
-#include "../../../../lib/inflate.c"
-
-void puts(const char *s)
-{
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *) s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *) __dest, *s = (char *) __src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-	return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data\n");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-	ulg c = crc;		/* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out++ = *in++;
-		c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg) outcnt;
-	output_ptr += (ulg) outcnt;
-	outcnt = 0;
-	puts(".");
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while (1) ;		/* Halt */
-}
-
-#define STACK_SIZE (4096)
-long __attribute__ ((aligned(8))) user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
-	output_data = (uch *) (CONFIG_MEMORY_START + 0x2000);
-	free_mem_ptr = (unsigned long) &_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
-	makecrc();
-	puts("Uncompressing Linux... ");
-	cache_control(CACHE_ENABLE);
-	gunzip();
-	puts("\n");
-
-#if 0
-	/* When booting from ROM may want to do something like this if the
-	 * boot loader doesn't.
-	 */
-
-	/* Set up the parameters and command line */
-	{
-		volatile unsigned int *parambase =
-		    (int *) (CONFIG_MEMORY_START + 0x1000);
-
-		parambase[0] = 0x1;	/* MOUNT_ROOT_RDONLY */
-		parambase[1] = 0x0;	/* RAMDISK_FLAGS */
-		parambase[2] = 0x0200;	/* ORIG_ROOT_DEV */
-		parambase[3] = 0x0;	/* LOADER_TYPE */
-		parambase[4] = 0x0;	/* INITRD_START */
-		parambase[5] = 0x0;	/* INITRD_SIZE */
-		parambase[6] = 0;
-
-		strcpy((char *) ((int) parambase + 0x100),
-		       "console=ttySC0,38400");
-	}
-#endif
-
-	puts("Ok, booting the kernel.\n");
-
-	cache_control(CACHE_DISABLE);
-}
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
deleted file mode 100644
index 566071926b13..000000000000
--- a/arch/sh/boot/compressed/piggy.S
+++ /dev/null
@@ -1,8 +0,0 @@
-	.global	input_len, input_data
-	.data
-input_len:
-	.long	input_data_end - input_data
-input_data:
-	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
-input_data_end:
-	.end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
new file mode 100644
index 000000000000..f02382ae5c48
--- /dev/null
+++ b/arch/sh/boot/compressed/vmlinux.scr
@@ -0,0 +1,10 @@
+SECTIONS
+{
+  .rodata.compressed : {
+	input_len = .;
+	LONG(input_data_end - input_data) input_data = .;
+	*(.data)
+	output_len = . - 4;
+	input_data_end = .;
+	}
+}
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
new file mode 100644
index 000000000000..5806eee84f6f
--- /dev/null
+++ b/arch/sh/boot/romimage/Makefile
@@ -0,0 +1,19 @@
+#
+# linux/arch/sh/boot/romimage/Makefile
+#
+# create an image suitable for burning to flash from zImage
+#
+
+targets		:= vmlinux head.o
+
+OBJECTS = $(obj)/head.o
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+	$(call if_changed,ld)
+	@:
+
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr arch/sh/boot/zImage FORCE
+	$(call if_changed,ld)
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
new file mode 100644
index 000000000000..219bc626dd71
--- /dev/null
+++ b/arch/sh/boot/romimage/head.S
@@ -0,0 +1,10 @@
+/*
+ *  linux/arch/sh/boot/romimage/head.S
+ *
+ * Board specific setup code, executed before zImage loader
+ */
+
+.text
+	.global	romstart
+romstart:
+#include <mach/romimage.h>
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
new file mode 100644
index 000000000000..287c08f8b4bb
--- /dev/null
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -0,0 +1,6 @@
+SECTIONS
+{
+  .text : {
+	*(.data)
+	}
+}
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
new file mode 100644
index 000000000000..9a22c64775be
--- /dev/null
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -0,0 +1,1032 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc7
+# Tue Sep  8 13:56:18 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+CONFIG_SH_ECOVEC=y
+
+#
+# Timer and clock configuration
+#
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
new file mode 100644
index 000000000000..2050a76683c3
--- /dev/null
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -0,0 +1,1558 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc7
+# Wed Aug 26 09:09:07 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+CONFIG_SH_ECOVEC=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_TMU=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
new file mode 100644
index 000000000000..c0f9263e1387
--- /dev/null
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -0,0 +1,774 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 15:09:16 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+CONFIG_SH_KFR2R09=y
+# CONFIG_SH_ECOVEC is not set
+
+#
+# Timer and clock configuration
+#
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 quiet"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=y
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
new file mode 100644
index 000000000000..cef61319d2f4
--- /dev/null
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -0,0 +1,1059 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 21:58:52 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+CONFIG_SH_KFR2R09=y
+# CONFIG_SH_ECOVEC is not set
+
+#
+# Timer and clock configuration
+#
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=y
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index ca3c88a88021..2be2d75adbb7 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:11:58 2009
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 15:03:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -86,10 +95,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_STRIP_ASM_SYMS is not set
@@ -106,6 +117,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -534,7 +549,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -686,6 +705,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -732,7 +756,44 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_DS1302=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
@@ -754,6 +815,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -856,8 +918,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -865,6 +930,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -893,5 +959,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 63e9dd30b41c..b91fa8dbf047 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -27,12 +27,12 @@ config NR_ONCHIP_DMA_CHANNELS
 	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
 		       CPU_SUBTYPE_SH7760
 	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780  || \
-			CPU_SUBTYPE_SH7785
+			CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7724
 	default "6"
 	help
 	  This allows you to specify the number of channels that the on-chip
-	  DMAC supports. This will be 4 for SH7091/SH7750/SH7751 and 8 for the
-	  SH7750R/SH7751R.
+	  DMAC supports. This will be 4 for SH7750/SH7751/Sh7750S/SH7091 and 8 for the
+	  SH7750R/SH7751R/SH7760, 12 for the SH7723/SH7780/SH7785/SH7724, default is 6.
 
 config NR_DMA_CHANNELS_BOOL
 	depends on SH_DMA
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index 938817e34e2b..a9339a6174fc 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -40,14 +40,19 @@ static inline void heartbeat_toggle_bit(struct heartbeat_data *hd,
 	if (inverted)
 		new = ~new;
 
+	new &= hd->mask;
+
 	switch (hd->regsize) {
 	case 32:
+		new |= ioread32(hd->base) & ~hd->mask;
 		iowrite32(new, hd->base);
 		break;
 	case 16:
+		new |= ioread16(hd->base) & ~hd->mask;
 		iowrite16(new, hd->base);
 		break;
 	default:
+		new |= ioread8(hd->base) & ~hd->mask;
 		iowrite8(new, hd->base);
 		break;
 	}
@@ -72,6 +77,7 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct heartbeat_data *hd;
+	int i;
 
 	if (unlikely(pdev->num_resources != 1)) {
 		dev_err(&pdev->dev, "invalid number of resources\n");
@@ -107,6 +113,10 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
 		hd->nr_bits = ARRAY_SIZE(default_bit_pos);
 	}
 
+	hd->mask = 0;
+	for (i = 0; i < hd->nr_bits; i++)
+		hd->mask |= (1 << hd->bit_pos[i]);
+
 	if (!hd->regsize)
 		hd->regsize = 8;	/* default access size */
 
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 9a1c423ad167..c481df639022 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -295,6 +295,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			       vma->vm_page_prot);
 }
 
+#ifndef CONFIG_GENERIC_IOMAP
+
 static void __iomem *ioport_map_pci(struct pci_dev *dev,
 				    unsigned long port, unsigned int nr)
 {
@@ -346,6 +348,8 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
 }
 EXPORT_SYMBOL(pci_iounmap);
 
+#endif /* CONFIG_GENERIC_IOMAP */
+
 #ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pcibios_resource_to_bus);
 EXPORT_SYMBOL(pcibios_bus_to_resource);
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 43910cdf78a5..e121c30f797d 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,6 +1,6 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += cpu-features.h
+header-y += cachectl.h cpu-features.h
 
 unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
index c01718040166..d02c01b3e6b9 100644
--- a/arch/sh/include/asm/bug.h
+++ b/arch/sh/include/asm/bug.h
@@ -2,6 +2,7 @@
 #define __ASM_SH_BUG_H
 
 #define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
+#define BUGFLAG_UNWINDER	(1 << 1)
 
 #ifdef CONFIG_GENERIC_BUG
 #define HAVE_ARCH_BUG
@@ -72,6 +73,36 @@ do {							\
 	unlikely(__ret_warn_on);				\
 })
 
+#define UNWINDER_BUG()					\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		_EMIT_BUG_ENTRY				\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__),			\
+		   "i" (BUGFLAG_UNWINDER),		\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define UNWINDER_BUG_ON(x) ({					\
+	int __ret_unwinder_on = !!(x);				\
+	if (__builtin_constant_p(__ret_unwinder_on)) {		\
+		if (__ret_unwinder_on)				\
+			UNWINDER_BUG();				\
+	} else {						\
+		if (unlikely(__ret_unwinder_on))		\
+			UNWINDER_BUG();				\
+	}							\
+	unlikely(__ret_unwinder_on);				\
+})
+
+#else
+
+#define UNWINDER_BUG	BUG
+#define UNWINDER_BUG_ON	BUG_ON
+
 #endif /* CONFIG_GENERIC_BUG */
 
 #include <asm-generic/bug.h>
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
index 4924ff6f5439..46260fcbdf4b 100644
--- a/arch/sh/include/asm/bugs.h
+++ b/arch/sh/include/asm/bugs.h
@@ -21,25 +21,25 @@ static void __init check_bugs(void)
 
 	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
 
-	switch (current_cpu_data.type) {
-	case CPU_SH7619:
+	switch (current_cpu_data.family) {
+	case CPU_FAMILY_SH2:
 		*p++ = '2';
 		break;
-	case CPU_SH7201 ... CPU_MXG:
+	case CPU_FAMILY_SH2A:
 		*p++ = '2';
 		*p++ = 'a';
 		break;
-	case CPU_SH7705 ... CPU_SH7729:
+	case CPU_FAMILY_SH3:
 		*p++ = '3';
 		break;
-	case CPU_SH7750 ... CPU_SH4_501:
+	case CPU_FAMILY_SH4:
 		*p++ = '4';
 		break;
-	case CPU_SH7763 ... CPU_SHX3:
+	case CPU_FAMILY_SH4A:
 		*p++ = '4';
 		*p++ = 'a';
 		break;
-	case CPU_SH7343 ... CPU_SH7366:
+	case CPU_FAMILY_SH4AL_DSP:
 		*p++ = '4';
 		*p++ = 'a';
 		*p++ = 'l';
@@ -48,15 +48,15 @@ static void __init check_bugs(void)
 		*p++ = 's';
 		*p++ = 'p';
 		break;
-	case CPU_SH5_101 ... CPU_SH5_103:
+	case CPU_FAMILY_SH5:
 		*p++ = '6';
 		*p++ = '4';
 		break;
-	case CPU_SH_NONE:
+	case CPU_FAMILY_UNKNOWN:
 		/*
-		 * Specifically use CPU_SH_NONE rather than default:,
-		 * so we're able to have the compiler whine about
-		 * unhandled enumerations.
+		 * Specifically use CPU_FAMILY_UNKNOWN rather than
+		 * default:, so we're able to have the compiler whine
+		 * about unhandled enumerations.
 		 */
 		break;
 	}
diff --git a/arch/sh/include/asm/cachectl.h b/arch/sh/include/asm/cachectl.h
new file mode 100644
index 000000000000..6ffb4b7a212e
--- /dev/null
+++ b/arch/sh/include/asm/cachectl.h
@@ -0,0 +1,19 @@
+#ifndef _SH_CACHECTL_H
+#define _SH_CACHECTL_H
+
+/* Definitions for the cacheflush system call.  */
+
+#define CACHEFLUSH_D_INVAL	0x1	/* invalidate (without write back) */
+#define CACHEFLUSH_D_WB		0x2	/* write back (without invalidate) */
+#define CACHEFLUSH_D_PURGE	0x3	/* writeback and invalidate */
+
+#define CACHEFLUSH_I		0x4
+
+/*
+ * Options for cacheflush system call
+ */
+#define ICACHE	CACHEFLUSH_I		/* flush instruction cache */
+#define DCACHE	CACHEFLUSH_D_PURGE	/* writeback and flush data cache */
+#define BCACHE	(ICACHE|DCACHE)		/* flush both caches */
+
+#endif /* _SH_CACHECTL_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 4c5462daa74c..c29918f3c819 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -3,45 +3,65 @@
 
 #ifdef __KERNEL__
 
-#ifdef CONFIG_CACHE_OFF
+#include <linux/mm.h>
+
 /*
- * Nothing to do when the cache is disabled, initial flush and explicit
- * disabling is handled at CPU init time.
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
  *
- * See arch/sh/kernel/cpu/init.c:cache_init().
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *  - flush_cache_sigtramp(vaddr) flushes the signal trampoline
  */
-#define p3_cache_init()				do { } while (0)
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
-#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
-#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
-#else
-#include <cpu/cacheflush.h>
+extern void (*local_flush_cache_all)(void *args);
+extern void (*local_flush_cache_mm)(void *args);
+extern void (*local_flush_cache_dup_mm)(void *args);
+extern void (*local_flush_cache_page)(void *args);
+extern void (*local_flush_cache_range)(void *args);
+extern void (*local_flush_dcache_page)(void *args);
+extern void (*local_flush_icache_range)(void *args);
+extern void (*local_flush_icache_page)(void *args);
+extern void (*local_flush_cache_sigtramp)(void *args);
 
-/*
- * Consistent DMA requires that the __flush_xxx() primitives must be set
- * for any of the enabled non-coherent caches (most of the UP CPUs),
- * regardless of PIPT or VIPT cache configurations.
- */
+static inline void cache_noop(void *args) { }
+
+extern void (*__flush_wback_region)(void *start, int size);
+extern void (*__flush_purge_region)(void *start, int size);
+extern void (*__flush_invalidate_region)(void *start, int size);
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_dup_mm(struct mm_struct *mm);
+extern void flush_cache_page(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn);
+extern void flush_cache_range(struct vm_area_struct *vma,
+				 unsigned long start, unsigned long end);
+extern void flush_dcache_page(struct page *page);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma,
+				 struct page *page);
+extern void flush_cache_sigtramp(unsigned long address);
+
+struct flusher_data {
+	struct vm_area_struct *vma;
+	unsigned long addr1, addr2;
+};
 
-/* Flush (write-back only) a region (smaller than a page) */
-extern void __flush_wback_region(void *start, int size);
-/* Flush (write-back & invalidate) a region (smaller than a page) */
-extern void __flush_purge_region(void *start, int size);
-/* Flush (invalidate only) a region (smaller than a page) */
-extern void __flush_invalidate_region(void *start, int size);
-#endif
+#define ARCH_HAS_FLUSH_ANON_PAGE
+extern void __flush_anon_page(struct page *page, unsigned long);
+
+static inline void flush_anon_page(struct vm_area_struct *vma,
+				   struct page *page, unsigned long vmaddr)
+{
+	if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
+		__flush_anon_page(page, vmaddr);
+}
 
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
 static inline void flush_kernel_dcache_page(struct page *page)
@@ -49,7 +69,6 @@ static inline void flush_kernel_dcache_page(struct page *page)
 	flush_dcache_page(page);
 }
 
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
 extern void copy_to_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len);
@@ -57,23 +76,20 @@ extern void copy_to_user_page(struct vm_area_struct *vma,
 extern void copy_from_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len);
-#else
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-		flush_icache_user_range(vma, page, vaddr, len);	\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-	} while (0)
-#endif
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+void kmap_coherent_init(void);
+void *kmap_coherent(struct page *page, unsigned long addr);
+void kunmap_coherent(void *kvaddr);
+
+#define PG_dcache_dirty	PG_arch_1
+
+void cpu_cache_init(void);
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index 8688a88303ee..b16debfe8c1e 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -3,7 +3,9 @@
  *
  * This file is released under the GPLv2
  */
-#include <asm-generic/device.h>
+
+struct dev_archdata {
+};
 
 struct platform_device;
 /* allocate contiguous memory chunk and fill in struct resource */
@@ -12,3 +14,15 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
+#define PDEV_ARCHDATA_FLAG_INIT 0
+#define PDEV_ARCHDATA_FLAG_IDLE 1
+#define PDEV_ARCHDATA_FLAG_SUSP 2
+
+struct pdev_archdata {
+	int hwblk_id;
+#ifdef CONFIG_PM_RUNTIME
+	unsigned long flags;
+	struct list_head entry;
+	struct mutex mutex;
+#endif
+};
diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
index 0c8f8e14622a..68a5f4cb0343 100644
--- a/arch/sh/include/asm/dma-sh.h
+++ b/arch/sh/include/asm/dma-sh.h
@@ -16,6 +16,7 @@
 
 /* DMAOR contorl: The DMAOR access size is different by CPU.*/
 #if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7724)	|| \
     defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define dmaor_read_reg(n) \
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
new file mode 100644
index 000000000000..ced6795891a6
--- /dev/null
+++ b/arch/sh/include/asm/dwarf.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_SH_DWARF_H
+#define __ASM_SH_DWARF_H
+
+#ifdef CONFIG_DWARF_UNWINDER
+
+/*
+ * DWARF expression operations
+ */
+#define DW_OP_addr	0x03
+#define DW_OP_deref	0x06
+#define DW_OP_const1u	0x08
+#define DW_OP_const1s	0x09
+#define DW_OP_const2u	0x0a
+#define DW_OP_const2s	0x0b
+#define DW_OP_const4u	0x0c
+#define DW_OP_const4s	0x0d
+#define DW_OP_const8u	0x0e
+#define DW_OP_const8s	0x0f
+#define DW_OP_constu	0x10
+#define DW_OP_consts	0x11
+#define DW_OP_dup	0x12
+#define DW_OP_drop	0x13
+#define DW_OP_over	0x14
+#define DW_OP_pick	0x15
+#define DW_OP_swap	0x16
+#define DW_OP_rot	0x17
+#define DW_OP_xderef	0x18
+#define DW_OP_abs	0x19
+#define DW_OP_and	0x1a
+#define DW_OP_div	0x1b
+#define DW_OP_minus	0x1c
+#define DW_OP_mod	0x1d
+#define DW_OP_mul	0x1e
+#define DW_OP_neg	0x1f
+#define DW_OP_not	0x20
+#define DW_OP_or	0x21
+#define DW_OP_plus	0x22
+#define DW_OP_plus_uconst	0x23
+#define DW_OP_shl	0x24
+#define DW_OP_shr	0x25
+#define DW_OP_shra	0x26
+#define DW_OP_xor	0x27
+#define DW_OP_skip	0x2f
+#define DW_OP_bra	0x28
+#define DW_OP_eq	0x29
+#define DW_OP_ge	0x2a
+#define DW_OP_gt	0x2b
+#define DW_OP_le	0x2c
+#define DW_OP_lt	0x2d
+#define DW_OP_ne	0x2e
+#define DW_OP_lit0	0x30
+#define DW_OP_lit1	0x31
+#define DW_OP_lit2	0x32
+#define DW_OP_lit3	0x33
+#define DW_OP_lit4	0x34
+#define DW_OP_lit5	0x35
+#define DW_OP_lit6	0x36
+#define DW_OP_lit7	0x37
+#define DW_OP_lit8	0x38
+#define DW_OP_lit9	0x39
+#define DW_OP_lit10	0x3a
+#define DW_OP_lit11	0x3b
+#define DW_OP_lit12	0x3c
+#define DW_OP_lit13	0x3d
+#define DW_OP_lit14	0x3e
+#define DW_OP_lit15	0x3f
+#define DW_OP_lit16	0x40
+#define DW_OP_lit17	0x41
+#define DW_OP_lit18	0x42
+#define DW_OP_lit19	0x43
+#define DW_OP_lit20	0x44
+#define DW_OP_lit21	0x45
+#define DW_OP_lit22	0x46
+#define DW_OP_lit23	0x47
+#define DW_OP_lit24	0x48
+#define DW_OP_lit25	0x49
+#define DW_OP_lit26	0x4a
+#define DW_OP_lit27	0x4b
+#define DW_OP_lit28	0x4c
+#define DW_OP_lit29	0x4d
+#define DW_OP_lit30	0x4e
+#define DW_OP_lit31	0x4f
+#define DW_OP_reg0	0x50
+#define DW_OP_reg1	0x51
+#define DW_OP_reg2	0x52
+#define DW_OP_reg3	0x53
+#define DW_OP_reg4	0x54
+#define DW_OP_reg5	0x55
+#define DW_OP_reg6	0x56
+#define DW_OP_reg7	0x57
+#define DW_OP_reg8	0x58
+#define DW_OP_reg9	0x59
+#define DW_OP_reg10	0x5a
+#define DW_OP_reg11	0x5b
+#define DW_OP_reg12	0x5c
+#define DW_OP_reg13	0x5d
+#define DW_OP_reg14	0x5e
+#define DW_OP_reg15	0x5f
+#define DW_OP_reg16	0x60
+#define DW_OP_reg17	0x61
+#define DW_OP_reg18	0x62
+#define DW_OP_reg19	0x63
+#define DW_OP_reg20	0x64
+#define DW_OP_reg21	0x65
+#define DW_OP_reg22	0x66
+#define DW_OP_reg23	0x67
+#define DW_OP_reg24	0x68
+#define DW_OP_reg25	0x69
+#define DW_OP_reg26	0x6a
+#define DW_OP_reg27	0x6b
+#define DW_OP_reg28	0x6c
+#define DW_OP_reg29	0x6d
+#define DW_OP_reg30	0x6e
+#define DW_OP_reg31	0x6f
+#define DW_OP_breg0	0x70
+#define DW_OP_breg1	0x71
+#define DW_OP_breg2	0x72
+#define DW_OP_breg3	0x73
+#define DW_OP_breg4	0x74
+#define DW_OP_breg5	0x75
+#define DW_OP_breg6	0x76
+#define DW_OP_breg7	0x77
+#define DW_OP_breg8	0x78
+#define DW_OP_breg9	0x79
+#define DW_OP_breg10	0x7a
+#define DW_OP_breg11	0x7b
+#define DW_OP_breg12	0x7c
+#define DW_OP_breg13	0x7d
+#define DW_OP_breg14	0x7e
+#define DW_OP_breg15	0x7f
+#define DW_OP_breg16	0x80
+#define DW_OP_breg17	0x81
+#define DW_OP_breg18	0x82
+#define DW_OP_breg19	0x83
+#define DW_OP_breg20	0x84
+#define DW_OP_breg21	0x85
+#define DW_OP_breg22	0x86
+#define DW_OP_breg23	0x87
+#define DW_OP_breg24	0x88
+#define DW_OP_breg25	0x89
+#define DW_OP_breg26	0x8a
+#define DW_OP_breg27	0x8b
+#define DW_OP_breg28	0x8c
+#define DW_OP_breg29	0x8d
+#define DW_OP_breg30	0x8e
+#define DW_OP_breg31	0x8f
+#define DW_OP_regx	0x90
+#define DW_OP_fbreg	0x91
+#define DW_OP_bregx	0x92
+#define DW_OP_piece	0x93
+#define DW_OP_deref_size	0x94
+#define DW_OP_xderef_size	0x95
+#define DW_OP_nop	0x96
+#define DW_OP_push_object_address	0x97
+#define DW_OP_call2	0x98
+#define DW_OP_call4	0x99
+#define DW_OP_call_ref	0x9a
+#define DW_OP_form_tls_address	0x9b
+#define DW_OP_call_frame_cfa	0x9c
+#define DW_OP_bit_piece	0x9d
+#define DW_OP_lo_user	0xe0
+#define DW_OP_hi_user	0xff
+
+/*
+ * Addresses used in FDE entries in the .eh_frame section may be encoded
+ * using one of the following encodings.
+ */
+#define DW_EH_PE_absptr	0x00
+#define DW_EH_PE_omit	0xff
+#define DW_EH_PE_uleb128	0x01
+#define DW_EH_PE_udata2	0x02
+#define DW_EH_PE_udata4	0x03
+#define DW_EH_PE_udata8	0x04
+#define DW_EH_PE_sleb128	0x09
+#define DW_EH_PE_sdata2	0x0a
+#define DW_EH_PE_sdata4	0x0b
+#define DW_EH_PE_sdata8	0x0c
+#define DW_EH_PE_signed	0x09
+
+#define DW_EH_PE_pcrel	0x10
+
+/*
+ * The architecture-specific register number that contains the return
+ * address in the .debug_frame table.
+ */
+#define DWARF_ARCH_RA_REG	17
+
+#ifndef __ASSEMBLY__
+/*
+ * Read either the frame pointer (r14) or the stack pointer (r15).
+ * NOTE: this MUST be inlined.
+ */
+static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
+{
+	unsigned long value = 0;
+
+	switch (reg) {
+	case 14:
+		__asm__ __volatile__("mov r14, %0\n" : "=r" (value));
+		break;
+	case 15:
+		__asm__ __volatile__("mov r15, %0\n" : "=r" (value));
+		break;
+	default:
+		BUG();
+	}
+
+	return value;
+}
+
+/**
+ *	dwarf_cie - Common Information Entry
+ */
+struct dwarf_cie {
+	unsigned long length;
+	unsigned long cie_id;
+	unsigned char version;
+	const char *augmentation;
+	unsigned int code_alignment_factor;
+	int data_alignment_factor;
+
+	/* Which column in the rule table represents return addr of func. */
+	unsigned int return_address_reg;
+
+	unsigned char *initial_instructions;
+	unsigned char *instructions_end;
+
+	unsigned char encoding;
+
+	unsigned long cie_pointer;
+
+	struct list_head link;
+
+	unsigned long flags;
+#define DWARF_CIE_Z_AUGMENTATION	(1 << 0)
+};
+
+/**
+ *	dwarf_fde - Frame Description Entry
+ */
+struct dwarf_fde {
+	unsigned long length;
+	unsigned long cie_pointer;
+	struct dwarf_cie *cie;
+	unsigned long initial_location;
+	unsigned long address_range;
+	unsigned char *instructions;
+	unsigned char *end;
+	struct list_head link;
+};
+
+/**
+ *	dwarf_frame - DWARF information for a frame in the call stack
+ */
+struct dwarf_frame {
+	struct dwarf_frame *prev, *next;
+
+	unsigned long pc;
+
+	struct list_head reg_list;
+
+	unsigned long cfa;
+
+	/* Valid when DW_FRAME_CFA_REG_OFFSET is set in flags */
+	unsigned int cfa_register;
+	unsigned int cfa_offset;
+
+	/* Valid when DW_FRAME_CFA_REG_EXP is set in flags */
+	unsigned char *cfa_expr;
+	unsigned int cfa_expr_len;
+
+	unsigned long flags;
+#define DWARF_FRAME_CFA_REG_OFFSET	(1 << 0)
+#define DWARF_FRAME_CFA_REG_EXP		(1 << 1)
+
+	unsigned long return_addr;
+};
+
+/**
+ *	dwarf_reg - DWARF register
+ *	@flags: Describes how to calculate the value of this register
+ */
+struct dwarf_reg {
+	struct list_head link;
+
+	unsigned int number;
+
+	unsigned long addr;
+	unsigned long flags;
+#define DWARF_REG_OFFSET	(1 << 0)
+#define DWARF_VAL_OFFSET	(1 << 1)
+#define DWARF_UNDEFINED		(1 << 2)
+};
+
+/*
+ * Call Frame instruction opcodes.
+ */
+#define DW_CFA_advance_loc	0x40
+#define DW_CFA_offset		0x80
+#define DW_CFA_restore		0xc0
+#define DW_CFA_nop		0x00
+#define DW_CFA_set_loc		0x01
+#define DW_CFA_advance_loc1	0x02
+#define DW_CFA_advance_loc2	0x03
+#define DW_CFA_advance_loc4	0x04
+#define DW_CFA_offset_extended	0x05
+#define DW_CFA_restore_extended	0x06
+#define DW_CFA_undefined	0x07
+#define DW_CFA_same_value	0x08
+#define DW_CFA_register		0x09
+#define DW_CFA_remember_state	0x0a
+#define DW_CFA_restore_state	0x0b
+#define DW_CFA_def_cfa		0x0c
+#define DW_CFA_def_cfa_register	0x0d
+#define DW_CFA_def_cfa_offset	0x0e
+#define DW_CFA_def_cfa_expression	0x0f
+#define DW_CFA_expression	0x10
+#define DW_CFA_offset_extended_sf	0x11
+#define DW_CFA_def_cfa_sf	0x12
+#define DW_CFA_def_cfa_offset_sf	0x13
+#define DW_CFA_val_offset	0x14
+#define DW_CFA_val_offset_sf	0x15
+#define DW_CFA_val_expression	0x16
+#define DW_CFA_lo_user		0x1c
+#define DW_CFA_hi_user		0x3f
+
+/* GNU extension opcodes  */
+#define DW_CFA_GNU_args_size	0x2e
+#define DW_CFA_GNU_negative_offset_extended 0x2f
+
+/*
+ * Some call frame instructions encode their operands in the opcode. We
+ * need some helper functions to extract both the opcode and operands
+ * from an instruction.
+ */
+static inline unsigned int DW_CFA_opcode(unsigned long insn)
+{
+	return (insn & 0xc0);
+}
+
+static inline unsigned int DW_CFA_operand(unsigned long insn)
+{
+	return (insn & 0x3f);
+}
+
+#define DW_EH_FRAME_CIE	0		/* .eh_frame CIE IDs are 0 */
+#define DW_CIE_ID	0xffffffff
+#define DW64_CIE_ID	0xffffffffffffffffULL
+
+/*
+ * DWARF FDE/CIE length field values.
+ */
+#define DW_EXT_LO	0xfffffff0
+#define DW_EXT_HI	0xffffffff
+#define DW_EXT_DWARF64	DW_EXT_HI
+
+extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
+					      struct dwarf_frame *);
+#endif /* !__ASSEMBLY__ */
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+#define CFI_UNDEFINED	.cfi_undefined
+
+#else
+
+/*
+ * Use the asm comment character to ignore the rest of the line.
+ */
+#define CFI_IGNORE	!
+
+#define CFI_STARTPROC	CFI_IGNORE
+#define CFI_ENDPROC	CFI_IGNORE
+#define CFI_DEF_CFA	CFI_IGNORE
+#define CFI_REGISTER	CFI_IGNORE
+#define CFI_REL_OFFSET	CFI_IGNORE
+#define CFI_UNDEFINED	CFI_IGNORE
+
+#ifndef __ASSEMBLY__
+static inline void dwarf_unwinder_init(void)
+{
+}
+#endif
+
+#endif /* CONFIG_DWARF_UNWINDER */
+
+#endif /* __ASM_SH_DWARF_H */
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 3a4752a65722..cc43a55e1fcf 100644
--- a/arch/sh/include/asm/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
@@ -7,7 +7,7 @@
 	.endm
 
 	.macro	sti
-	mov	#0xf0, r11
+	mov	#0xfffffff0, r11
 	extu.b	r11, r11
 	not	r11, r11
 	stc	sr, r10
@@ -31,8 +31,92 @@
 #endif	
 	.endm
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+	.macro	TRACE_IRQS_ON
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+	mov.l	r2, @-r15
+	mov.l	r3, @-r15
+	mov.l	r4, @-r15
+	mov.l	r5, @-r15
+	mov.l	r6, @-r15
+	mov.l	r7, @-r15
+
+	mov.l   7834f, r0
+	jsr	@r0
+	 nop
+
+	mov.l	@r15+, r7
+	mov.l	@r15+, r6
+	mov.l	@r15+, r5
+	mov.l	@r15+, r4
+	mov.l	@r15+, r3
+	mov.l	@r15+, r2
+	mov.l	@r15+, r1
+	mov.l	@r15+, r0
+	mov.l	7834f, r0
+
+	bra	7835f
+	 nop
+	.balign	4
+7834:	.long	trace_hardirqs_on
+7835:
+	.endm
+	.macro	TRACE_IRQS_OFF
+
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+	mov.l	r2, @-r15
+	mov.l	r3, @-r15
+	mov.l	r4, @-r15
+	mov.l	r5, @-r15
+	mov.l	r6, @-r15
+	mov.l	r7, @-r15
+
+	mov.l	7834f, r0
+	jsr	@r0
+	 nop
+
+	mov.l	@r15+, r7
+	mov.l	@r15+, r6
+	mov.l	@r15+, r5
+	mov.l	@r15+, r4
+	mov.l	@r15+, r3
+	mov.l	@r15+, r2
+	mov.l	@r15+, r1
+	mov.l	@r15+, r0
+	mov.l	7834f, r0
+
+	bra	7835f
+	 nop
+	.balign	4
+7834:	.long	trace_hardirqs_off
+7835:
+	.endm
+
+#else
+	.macro	TRACE_IRQS_ON
+	.endm
+
+	.macro	TRACE_IRQS_OFF
+	.endm
+#endif
+
 #if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
 # define PREF(x)	pref	@x
 #else
 # define PREF(x)	nop
 #endif
+
+	/*
+	 * Macro for use within assembly. Because the DWARF unwinder
+	 * needs to use the frame register to unwind the stack, we
+	 * need to setup r14 with the value of the stack pointer as
+	 * the return address is usually on the stack somewhere.
+	 */
+	.macro	setup_frame_reg
+#ifdef CONFIG_DWARF_UNWINDER
+	mov	r15, r14
+#endif
+	.endm
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
index 8fea7d8c8258..12f3a31f20af 100644
--- a/arch/sh/include/asm/ftrace.h
+++ b/arch/sh/include/asm/ftrace.h
@@ -4,6 +4,7 @@
 #ifdef CONFIG_FUNCTION_TRACER
 
 #define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+#define FTRACE_SYSCALL_MAX	NR_syscalls
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
@@ -11,10 +12,13 @@ extern void mcount(void);
 #define MCOUNT_ADDR		((long)(mcount))
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-#define CALLER_ADDR		((long)(ftrace_caller))
+#define CALL_ADDR		((long)(ftrace_call))
 #define STUB_ADDR		((long)(ftrace_stub))
+#define GRAPH_ADDR		((long)(ftrace_graph_call))
+#define CALLER_ADDR		((long)(ftrace_caller))
 
-#define MCOUNT_INSN_OFFSET	((STUB_ADDR - CALLER_ADDR) >> 1)
+#define MCOUNT_INSN_OFFSET	((STUB_ADDR - CALL_ADDR) - 4)
+#define GRAPH_INSN_OFFSET	((CALLER_ADDR - GRAPH_ADDR) - 4)
 
 struct dyn_arch_ftrace {
 	/* No extra data needed on sh */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
index 715ee237fc77..a5be4afa790b 100644
--- a/arch/sh/include/asm/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
@@ -1,16 +1,9 @@
 #ifndef __ASM_SH_HARDIRQ_H
 #define __ASM_SH_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 extern void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h
index 724a43ed245e..caaafe5a3ef1 100644
--- a/arch/sh/include/asm/heartbeat.h
+++ b/arch/sh/include/asm/heartbeat.h
@@ -11,6 +11,7 @@ struct heartbeat_data {
 	unsigned int nr_bits;
 	struct timer_list timer;
 	unsigned int regsize;
+	unsigned int mask;
 	unsigned long flags;
 };
 
diff --git a/arch/sh/include/asm/hwblk.h b/arch/sh/include/asm/hwblk.h
new file mode 100644
index 000000000000..5d3ccae4202b
--- /dev/null
+++ b/arch/sh/include/asm/hwblk.h
@@ -0,0 +1,72 @@
+#ifndef __ASM_SH_HWBLK_H
+#define __ASM_SH_HWBLK_H
+
+#include <asm/clock.h>
+#include <asm/io.h>
+
+#define HWBLK_CNT_USAGE 0
+#define HWBLK_CNT_IDLE 1
+#define HWBLK_CNT_DEVICES 2
+#define HWBLK_CNT_NR 3
+
+#define HWBLK_AREA_FLAG_PARENT (1 << 0) /* valid parent */
+
+#define HWBLK_AREA(_flags, _parent)		\
+{						\
+	.flags = _flags,			\
+	.parent = _parent,			\
+}
+
+struct hwblk_area {
+	int cnt[HWBLK_CNT_NR];
+	unsigned char parent;
+	unsigned char flags;
+};
+
+#define HWBLK(_mstp, _bit, _area)		\
+{						\
+	.mstp = (void __iomem *)_mstp,		\
+	.bit = _bit,				\
+	.area = _area,				\
+}
+
+struct hwblk {
+	void __iomem *mstp;
+	unsigned char bit;
+	unsigned char area;
+	int cnt[HWBLK_CNT_NR];
+};
+
+struct hwblk_info {
+	struct hwblk_area *areas;
+	int nr_areas;
+	struct hwblk *hwblks;
+	int nr_hwblks;
+};
+
+/* Should be defined by processor-specific code */
+int arch_hwblk_init(void);
+int arch_hwblk_sleep_mode(void);
+
+int hwblk_register(struct hwblk_info *info);
+int hwblk_init(void);
+
+void hwblk_enable(struct hwblk_info *info, int hwblk);
+void hwblk_disable(struct hwblk_info *info, int hwblk);
+
+void hwblk_cnt_inc(struct hwblk_info *info, int hwblk, int cnt);
+void hwblk_cnt_dec(struct hwblk_info *info, int hwblk, int cnt);
+
+/* allow clocks to enable and disable hardware blocks */
+#define SH_HWBLK_CLK(_name, _id, _parent, _hwblk, _flags)	\
+{							\
+	.name		= _name,			\
+	.id		= _id,				\
+	.parent		= _parent,			\
+	.arch_flags	= _hwblk,			\
+	.flags		= _flags,			\
+}
+
+int sh_hwblk_clk_register(struct clk *clks, int nr);
+
+#endif /* __ASM_SH_HWBLK_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 25348141674b..5be45ea4dfec 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -92,8 +92,12 @@
 
 static inline void ctrl_delay(void)
 {
-#ifdef P2SEG
+#ifdef CONFIG_CPU_SH4
+	__raw_readw(CCN_PVR);
+#elif defined(P2SEG)
 	__raw_readw(P2SEG);
+#else
+#error "Need a dummy address for delay"
 #endif
 }
 
@@ -146,6 +150,7 @@ __BUILD_MEMORY_STRING(q, u64)
 #define readl_relaxed(a)	readl(a)
 #define readq_relaxed(a)	readq(a)
 
+#ifndef CONFIG_GENERIC_IOMAP
 /* Simple MMIO */
 #define ioread8(a)		__raw_readb(a)
 #define ioread16(a)		__raw_readw(a)
@@ -166,6 +171,15 @@ __BUILD_MEMORY_STRING(q, u64)
 #define iowrite8_rep(a, s, c)	__raw_writesb((a), (s), (c))
 #define iowrite16_rep(a, s, c)	__raw_writesw((a), (s), (c))
 #define iowrite32_rep(a, s, c)	__raw_writesl((a), (s), (c))
+#endif
+
+#define mmio_insb(p,d,c)	__raw_readsb(p,d,c)
+#define mmio_insw(p,d,c)	__raw_readsw(p,d,c)
+#define mmio_insl(p,d,c)	__raw_readsl(p,d,c)
+
+#define mmio_outsb(p,s,c)	__raw_writesb(p,s,c)
+#define mmio_outsw(p,s,c)	__raw_writesw(p,s,c)
+#define mmio_outsl(p,s,c)	__raw_writesl(p,s,c)
 
 /* synco on SH-4A, otherwise a nop */
 #define mmiowb()		wmb()
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index 0b9f896f203c..985219f9759e 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -4,6 +4,7 @@
 /* Grossly misnamed. */
 enum die_val {
 	DIE_TRAP,
+	DIE_NMI,
 	DIE_OOPS,
 };
 
diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
index 72704ed725e5..4235e228d921 100644
--- a/arch/sh/include/asm/kgdb.h
+++ b/arch/sh/include/asm/kgdb.h
@@ -30,9 +30,6 @@ static inline void arch_kgdb_breakpoint(void)
 	__asm__ __volatile__ ("trapa #0x3c\n");
 }
 
-/* State info */
-extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
-
 #define BUFMAX                 2048
 
 #define CACHE_FLUSH_IS_SAFE	1
diff --git a/arch/sh/include/asm/lmb.h b/arch/sh/include/asm/lmb.h
new file mode 100644
index 000000000000..9b437f657ffa
--- /dev/null
+++ b/arch/sh/include/asm/lmb.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_LMB_H
+#define __ASM_SH_LMB_H
+
+#define LMB_REAL_LIMIT	0
+
+#endif /* __ASM_SH_LMB_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 67d8946db193..41080b173a7a 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -69,7 +69,7 @@ static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
 		 * We exhaust ASID of this version.
 		 * Flush all TLB and start new cycle.
 		 */
-		flush_tlb_all();
+		local_flush_tlb_all();
 
 #ifdef CONFIG_SUPERH64
 		/*
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 49592c780a6e..81bffc0d6860 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -50,26 +50,24 @@ extern unsigned long shm_align_mask;
 extern unsigned long max_low_pfn, min_low_pfn;
 extern unsigned long memory_start, memory_end;
 
-extern void clear_page(void *to);
+static inline unsigned long
+pages_do_alias(unsigned long addr1, unsigned long addr2)
+{
+	return (addr1 ^ addr2) & shm_align_mask;
+}
+
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, void *from);
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
-	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
-	 defined(CONFIG_SH7705_CACHE_32KB))
 struct page;
 struct vm_area_struct;
-extern void clear_user_page(void *to, unsigned long address, struct page *page);
-extern void copy_user_page(void *to, void *from, unsigned long address,
-			   struct page *page);
-#if defined(CONFIG_CPU_SH4)
+
 extern void copy_user_highpage(struct page *to, struct page *from,
 			       unsigned long vaddr, struct vm_area_struct *vma);
 #define __HAVE_ARCH_COPY_USER_HIGHPAGE
-#endif
-#else
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-#endif
+extern void clear_user_highpage(struct page *page, unsigned long vaddr);
+#define clear_user_highpage	clear_user_highpage
 
 /*
  * These are used to make use of C type-checking..
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index 2a011b18090b..4f3efa7d5a64 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -36,6 +36,12 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define	NEFF_SIGN	(1LL << (NEFF - 1))
 #define	NEFF_MASK	(-1LL << NEFF)
 
+static inline unsigned long long neff_sign_extend(unsigned long val)
+{
+	unsigned long long extended = val;
+	return (extended & NEFF_SIGN) ? (extended | NEFF_MASK) : extended;
+}
+
 #ifdef CONFIG_29BIT
 #define NPHYS		29
 #else
@@ -133,27 +139,25 @@ typedef pte_t *pte_addr_t;
  */
 #define pgtable_cache_init()	do { } while (0)
 
-#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
-	defined(CONFIG_SH7705_CACHE_32KB))
-struct mm_struct;
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-#endif
-
 struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct * vma,
-			     unsigned long address, pte_t pte);
+
+extern void __update_cache(struct vm_area_struct *vma,
+			   unsigned long address, pte_t pte);
+extern void __update_tlb(struct vm_area_struct *vma,
+			 unsigned long address, pte_t pte);
+
+static inline void
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	__update_cache(vma, address, pte);
+	__update_tlb(vma, address, pte);
+}
+
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern void paging_init(void);
 extern void page_table_range_init(unsigned long start, unsigned long end,
 				  pgd_t *pgd);
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_CPU_SH4) && defined(CONFIG_MMU)
-extern void kmap_coherent_init(void);
-#else
-#define kmap_coherent_init()	do { } while (0)
-#endif
-
 /* arch/sh/mm/mmap.c */
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 72ea209195bd..c0d359ce337b 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -20,7 +20,7 @@
  * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
  *
  * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
+ *   Bit 10 is used for _PAGE_ACCESSED, and bit 11 is used for _PAGE_SPECIAL.
  *
  * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
  *   and timing control which (together with bit 0) are moved into the
@@ -52,6 +52,7 @@
 #define _PAGE_PROTNONE	0x200		/* software: if not present  */
 #define _PAGE_ACCESSED	0x400		/* software: page referenced */
 #define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
+#define _PAGE_SPECIAL	0x800		/* software: special page */
 
 #define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
 #define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
@@ -86,6 +87,14 @@
 #define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
 #define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
 
+#ifndef CONFIG_X2TLB
+/* copy the ptea attributes */
+static inline unsigned long copy_ptea_attributes(unsigned long x)
+{
+	return	((x >> 28) & 0xe) | (x & 0x1);
+}
+#endif
+
 /* Mask which drops unused bits from the PTEL value */
 #if defined(CONFIG_CPU_SH3)
 #define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
@@ -148,8 +157,12 @@
 # define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
 #endif
 
+/*
+ * Mask of bits that are to be preserved accross pgprot changes.
+ */
 #define _PAGE_CHG_MASK \
-	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
+	 _PAGE_DIRTY | _PAGE_SPECIAL)
 
 #ifndef __ASSEMBLY__
 
@@ -328,7 +341,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 #define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
 #define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
 #define pte_file(pte)		((pte).pte_low & _PAGE_FILE)
-#define pte_special(pte)	(0)
+#define pte_special(pte)	((pte).pte_low & _PAGE_SPECIAL)
 
 #ifdef CONFIG_X2TLB
 #define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
@@ -358,8 +371,9 @@ PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
 PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
 PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
 PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkspecial, |= _PAGE_SPECIAL);
 
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+#define __HAVE_ARCH_PTE_SPECIAL
 
 /*
  * Macro and implementation to make a page protection as uncachable.
@@ -394,13 +408,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 /* to find an entry in a page-table-directory. */
 #define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+#define __pgd_offset(address)	pgd_index(address)
 
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(address)	pgd_offset(&init_mm, address)
 
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
 /* Find an entry in the third-level page table.. */
 #define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define __pte_offset(address)	pte_index(address)
+
 #define pte_offset_kernel(dir, address) \
 	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
 #define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index c78990cda557..17cdbecc3adc 100644
--- a/arch/sh/include/asm/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
@@ -60,6 +60,9 @@ static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
 /* To find an entry in a kernel PGD. */
 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
 /*
  * PMD level access routines. Same notes as above.
  */
@@ -80,6 +83,8 @@ static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
 #define pte_index(address) \
 		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
+#define __pte_offset(address)	pte_index(address)
+
 #define pte_offset_kernel(dir, addr) \
 		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
 
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index ff7daaf9a620..017e0c1807b2 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -32,7 +32,7 @@ enum cpu_type {
 
 	/* SH-4A types */
 	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
-	CPU_SH7723, CPU_SH7724, CPU_SHX3,
+	CPU_SH7723, CPU_SH7724, CPU_SH7757, CPU_SHX3,
 
 	/* SH4AL-DSP types */
 	CPU_SH7343, CPU_SH7722, CPU_SH7366,
@@ -44,6 +44,17 @@ enum cpu_type {
 	CPU_SH_NONE
 };
 
+enum cpu_family {
+	CPU_FAMILY_SH2,
+	CPU_FAMILY_SH2A,
+	CPU_FAMILY_SH3,
+	CPU_FAMILY_SH4,
+	CPU_FAMILY_SH4A,
+	CPU_FAMILY_SH4AL_DSP,
+	CPU_FAMILY_SH5,
+	CPU_FAMILY_UNKNOWN,
+};
+
 /*
  * TLB information structure
  *
@@ -61,7 +72,7 @@ struct tlb_info {
 };
 
 struct sh_cpuinfo {
-	unsigned int type;
+	unsigned int type, family;
 	int cut_major, cut_minor;
 	unsigned long loops_per_jiffy;
 	unsigned long asid_cache;
diff --git a/arch/sh/include/asm/romimage-macros.h b/arch/sh/include/asm/romimage-macros.h
new file mode 100644
index 000000000000..ae17a150bb58
--- /dev/null
+++ b/arch/sh/include/asm/romimage-macros.h
@@ -0,0 +1,73 @@
+#ifndef __ROMIMAGE_MACRO_H
+#define __ROMIMAGE_MACRO_H
+
+/* The LIST command is used to include comments in the script */
+.macro	LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro  ED, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.l r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro  EW, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.w r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro  EB, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.b r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro  WAIT, time
+	mov.l  2f, r3
+1 :
+	nop
+	tst     r3, r3
+	bf/s    1b
+	dt      r3
+	bra	3f
+	 nop
+	.align 2
+2 :	.long \time * 100
+3 :
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro  DD, addr, addr2, nr
+	mov.l 1f, r1
+	mov.l @r1, r0
+	bra 2f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :
+.endm
+
+#endif /* __ROMIMAGE_MACRO_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 01a4076a3719..a78701da775b 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -7,6 +7,7 @@ extern void __nosave_begin, __nosave_end;
 extern long __machvec_start, __machvec_end;
 extern char __uncached_start, __uncached_end;
 extern char _ebss[];
+extern char __start_eh_frame[], __stop_eh_frame[];
 
 #endif /* __ASM_SH_SECTIONS_H */
 
diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
index b5a4dd5a9729..4a65b1e40eab 100644
--- a/arch/sh/include/asm/sh_keysc.h
+++ b/arch/sh/include/asm/sh_keysc.h
@@ -7,6 +7,7 @@ struct sh_keysc_info {
 	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
 	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
 	int delay;
+	int kycr2_delay;
 	int keycodes[SH_KEYSC_MAXKEYS];
 };
 
diff --git a/arch/sh/include/asm/stacktrace.h b/arch/sh/include/asm/stacktrace.h
new file mode 100644
index 000000000000..797018213718
--- /dev/null
+++ b/arch/sh/include/asm/stacktrace.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based on:
+ *	The x86 implementation - arch/x86/include/asm/stacktrace.h
+ */
+#ifndef _ASM_SH_STACKTRACE_H
+#define _ASM_SH_STACKTRACE_H
+
+/* Generic stack tracer with callbacks */
+
+struct stacktrace_ops {
+	void (*warning)(void *data, char *msg);
+	/* msg must contain %s for the symbol */
+	void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
+	void (*address)(void *data, unsigned long address, int reliable);
+	/* On negative return stop dumping */
+	int (*stack)(void *data, char *name);
+};
+
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+		unsigned long *stack,
+		const struct stacktrace_ops *ops, void *data);
+
+#endif /* _ASM_SH_STACKTRACE_H */
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index b1b995370e79..5c8ea28ff7a4 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -10,6 +10,15 @@ struct swsusp_arch_regs {
 	struct pt_regs user_regs;
 	unsigned long bank1_regs[8];
 };
+
+void sh_mobile_call_standby(unsigned long mode);
+
+#ifdef CONFIG_CPU_IDLE
+void sh_mobile_setup_cpuidle(void);
+#else
+static inline void sh_mobile_setup_cpuidle(void) {}
+#endif
+
 #endif
 
 /* flags passed to assembly suspend code */
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 6f83f2cc45c1..7d80df4f09cb 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -65,6 +65,7 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	case 3: args[2] = regs->regs[6];
 	case 2: args[1] = regs->regs[5];
 	case 1:	args[0] = regs->regs[4];
+	case 0:
 		break;
 	default:
 		BUG();
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index ab79e1f4fbe0..b5c5acdc8c0e 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -14,18 +14,6 @@
 
 #define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
 
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define __icbi()			\
-{					\
-	unsigned long __addr;		\
-	__addr = 0xa8000000;		\
-	__asm__ __volatile__(		\
-		"icbi   %0\n\t"		\
-		: /* no output */	\
-		: "m" (__m(__addr)));	\
-}
-#endif
-
 /*
  * A brief note on ctrl_barrier(), the control register write barrier.
  *
@@ -44,7 +32,7 @@
 #define mb()		__asm__ __volatile__ ("synco": : :"memory")
 #define rmb()		mb()
 #define wmb()		__asm__ __volatile__ ("synco": : :"memory")
-#define ctrl_barrier()	__icbi()
+#define ctrl_barrier()	__icbi(0xa8000000)
 #define read_barrier_depends()	do { } while(0)
 #else
 #define mb()		__asm__ __volatile__ ("": : :"memory")
@@ -181,6 +169,11 @@ BUILD_TRAP_HANDLER(breakpoint);
 BUILD_TRAP_HANDLER(singlestep);
 BUILD_TRAP_HANDLER(fpu_error);
 BUILD_TRAP_HANDLER(fpu_state_restore);
+BUILD_TRAP_HANDLER(nmi);
+
+#ifdef CONFIG_BUG
+extern void handle_BUG(struct pt_regs *);
+#endif
 
 #define arch_align_stack(x) (x)
 
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 6c68a51f1cc5..607d413f6168 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -14,12 +14,12 @@ do {									\
 			(u32 *)&tsk->thread.dsp_status;			\
 	__asm__ __volatile__ (						\
 		".balign 4\n\t"						\
+		"movs.l	@r2+, a0\n\t"					\
 		"movs.l	@r2+, a1\n\t"					\
 		"movs.l	@r2+, a0g\n\t"					\
 		"movs.l	@r2+, a1g\n\t"					\
 		"movs.l	@r2+, m0\n\t"					\
 		"movs.l	@r2+, m1\n\t"					\
-		"movs.l	@r2+, a0\n\t"					\
 		"movs.l	@r2+, x0\n\t"					\
 		"movs.l	@r2+, x1\n\t"					\
 		"movs.l	@r2+, y0\n\t"					\
@@ -39,20 +39,20 @@ do {									\
 									\
 	__asm__ __volatile__ (						\
 		".balign 4\n\t"						\
-		"stc.l	mod, @-r2\n\t"				\
+		"stc.l	mod, @-r2\n\t"					\
 		"stc.l	re, @-r2\n\t"					\
 		"stc.l	rs, @-r2\n\t"					\
-		"sts.l	dsr, @-r2\n\t"				\
-		"sts.l	y1, @-r2\n\t"					\
-		"sts.l	y0, @-r2\n\t"					\
-		"sts.l	x1, @-r2\n\t"					\
-		"sts.l	x0, @-r2\n\t"					\
-		"sts.l	a0, @-r2\n\t"					\
-		".word	0xf653		! movs.l	a1, @-r2\n\t"	\
-		".word	0xf6f3		! movs.l	a0g, @-r2\n\t"	\
-		".word	0xf6d3		! movs.l	a1g, @-r2\n\t"	\
-		".word	0xf6c3		! movs.l        m0, @-r2\n\t"	\
-		".word	0xf6e3		! movs.l        m1, @-r2\n\t"	\
+		"sts.l	dsr, @-r2\n\t"					\
+		"movs.l	y1, @-r2\n\t"					\
+		"movs.l	y0, @-r2\n\t"					\
+		"movs.l	x1, @-r2\n\t"					\
+		"movs.l	x0, @-r2\n\t"					\
+		"movs.l	m1, @-r2\n\t"					\
+		"movs.l	m0, @-r2\n\t"					\
+		"movs.l	a1g, @-r2\n\t"					\
+		"movs.l	a0g, @-r2\n\t"					\
+		"movs.l	a1, @-r2\n\t"					\
+		"movs.l	a0, @-r2\n\t"					\
 		: : "r" (__ts2));					\
 } while (0)
 
@@ -63,6 +63,16 @@ do {									\
 #define __restore_dsp(tsk)	do { } while (0)
 #endif
 
+#if defined(CONFIG_CPU_SH4A)
+#define __icbi(addr)	__asm__ __volatile__ ( "icbi @%0\n\t" : : "r" (addr))
+#else
+#define __icbi(addr)	mb()
+#endif
+
+#define __ocbp(addr)	__asm__ __volatile__ ( "ocbp @%0\n\t" : : "r" (addr))
+#define __ocbi(addr)	__asm__ __volatile__ ( "ocbi @%0\n\t" : : "r" (addr))
+#define __ocbwb(addr)	__asm__ __volatile__ ( "ocbwb @%0\n\t" : : "r" (addr))
+
 struct task_struct *__switch_to(struct task_struct *prev,
 				struct task_struct *next);
 
@@ -198,8 +208,13 @@ do {							\
 })
 #endif
 
+static inline reg_size_t register_align(void *val)
+{
+	return (unsigned long)(signed long)val;
+}
+
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
-			    struct mem_access *ma);
+			    struct mem_access *ma, int);
 
 asmlinkage void do_address_error(struct pt_regs *regs,
 				 unsigned long writeaccess,
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index 943acf5ea07c..8e4a03e7966c 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -37,4 +37,14 @@ do {								\
 #define jump_to_uncached()	do { } while (0)
 #define back_to_cached()	do { } while (0)
 
+#define __icbi(addr)	__asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
+#define __ocbp(addr)	__asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
+#define __ocbi(addr)	__asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
+#define __ocbwb(addr)	__asm__ __volatile__ ( "ocbwb %0, 0\n\t" : : "r" (addr))
+
+static inline reg_size_t register_align(void *val)
+{
+	return (unsigned long long)(signed long long)(signed long)val;
+}
+
 #endif /* __ASM_SH_SYSTEM_64_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index d570ac2e5cb9..bdeb9d46d17d 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -97,7 +97,7 @@ static inline struct thread_info *current_thread_info(void)
 
 extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
 extern void free_thread_info(struct thread_info *ti);
- 
+
 #endif /* THREAD_SHIFT < PAGE_SHIFT */
 
 #endif /* __ASSEMBLY__ */
@@ -116,6 +116,7 @@ extern void free_thread_info(struct thread_info *ti);
 #define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
 #define TIF_SECCOMP		6	/* secure computing */
 #define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
+#define TIF_SYSCALL_TRACEPOINT	8	/* for ftrace syscall instrumentation */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18
@@ -129,25 +130,27 @@ extern void free_thread_info(struct thread_info *ti);
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_USEDFPU		(1 << TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 /*
- * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we
+ * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or we
  * blow the tst immediate size constraints and need to fix up
  * arch/sh/kernel/entry-common.S.
  */
 
 /* work to do in syscall trace */
 #define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
-				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP    | \
+				 _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
 				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
 				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index b69ee850906d..f8c40cc65054 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -15,14 +15,14 @@
 	.cache_nice_tries	= 2,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
+	.newidle_idx		= 0,			\
+	.wake_idx		= 0,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
index c7f3c94837dd..f8421f7ad63a 100644
--- a/arch/sh/include/asm/types.h
+++ b/arch/sh/include/asm/types.h
@@ -11,8 +11,10 @@
 
 #ifdef CONFIG_SUPERH32
 typedef u16 insn_size_t;
+typedef u32 reg_size_t;
 #else
 typedef u32 insn_size_t;
+typedef u64 reg_size_t;
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 61d6ad93d786..925dd40d9d55 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -132,7 +132,7 @@
 #define __NR_clone		120
 #define __NR_setdomainname	121
 #define __NR_uname		122
-#define __NR_modify_ldt		123
+#define __NR_cacheflush		123
 #define __NR_adjtimex		124
 #define __NR_mprotect		125
 #define __NR_sigprocmask	126
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index a751699afda3..2b84bc916bc5 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -137,7 +137,7 @@
 #define __NR_clone		120
 #define __NR_setdomainname	121
 #define __NR_uname		122
-#define __NR_modify_ldt		123
+#define __NR_cacheflush		123
 #define __NR_adjtimex		124
 #define __NR_mprotect		125
 #define __NR_sigprocmask	126
diff --git a/arch/sh/include/asm/unwinder.h b/arch/sh/include/asm/unwinder.h
new file mode 100644
index 000000000000..1e65c07b3e18
--- /dev/null
+++ b/arch/sh/include/asm/unwinder.h
@@ -0,0 +1,31 @@
+#ifndef _LINUX_UNWINDER_H
+#define _LINUX_UNWINDER_H
+
+#include <asm/stacktrace.h>
+
+struct unwinder {
+	const char *name;
+	struct list_head list;
+	int rating;
+	void (*dump)(struct task_struct *, struct pt_regs *,
+		     unsigned long *, const struct stacktrace_ops *, void *);
+};
+
+extern int unwinder_init(void);
+extern int unwinder_register(struct unwinder *);
+
+extern void unwind_stack(struct task_struct *, struct pt_regs *,
+			 unsigned long *, const struct stacktrace_ops *,
+			 void *);
+
+extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
+			      unsigned long *, const struct stacktrace_ops *,
+			      void *);
+
+/*
+ * Used by fault handling code to signal to the unwinder code that it
+ * should switch to a different unwinder.
+ */
+extern int unwinder_faulted;
+
+#endif /* _LINUX_UNWINDER_H */
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
new file mode 100644
index 000000000000..244ec4ad9a79
--- /dev/null
+++ b/arch/sh/include/asm/vmlinux.lds.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_VMLINUX_LDS_H
+#define __ASM_SH_VMLINUX_LDS_H
+
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+#define DWARF_EH_FRAME							\
+	.eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) {			\
+		  VMLINUX_SYMBOL(__start_eh_frame) = .;			\
+		  *(.eh_frame)						\
+		  VMLINUX_SYMBOL(__stop_eh_frame) = .;			\
+	}
+#else
+#define DWARF_EH_FRAME
+#endif
+
+#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
index f024fed00a72..2fe7cee9e43a 100644
--- a/arch/sh/include/asm/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -13,10 +13,18 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
+#include <linux/io.h>
+
+#define WTCNT_HIGH	0x5a
+#define WTCSR_HIGH	0xa5
+
+#define WTCSR_CKS2	0x04
+#define WTCSR_CKS1	0x02
+#define WTCSR_CKS0	0x01
+
 #include <cpu/watchdog.h>
-#include <asm/io.h>
 
-/* 
+/*
  * See cpu-sh2/watchdog.h for explanation of this stupidity..
  */
 #ifndef WTCNT_R
@@ -27,13 +35,6 @@
 #  define WTCSR_R	WTCSR
 #endif
 
-#define WTCNT_HIGH	0x5a
-#define WTCSR_HIGH	0xa5
-
-#define WTCSR_CKS2	0x04
-#define WTCSR_CKS1	0x02
-#define WTCSR_CKS0	0x01
-
 /*
  * CKS0-2 supports a number of clock division ratios. At the time the watchdog
  * is enabled, it defaults to a 41 usec overflow period .. we overload this to
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
deleted file mode 100644
index c3db00b73605..000000000000
--- a/arch/sh/include/cpu-common/cpu/cacheflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/cacheflush.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
-#define __ASM_CPU_SH2_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-2, so
- *  we don't need them.
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
deleted file mode 100644
index 3d3b9205d2ac..000000000000
--- a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H
-#define __ASM_CPU_SH2A_CACHEFLUSH_H
-
-/* 
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-2, so
- *  we don't need them.
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-void flush_icache_range(unsigned long start, unsigned long end);
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
deleted file mode 100644
index 1ac27aae6700..000000000000
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped	PG_arch_1
-
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-                              unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-
-#else
-#include <cpu-common/cpu/cacheflush.h>
-#endif
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
deleted file mode 100644
index 065306d376eb..000000000000
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
-#define __ASM_CPU_SH4_CACHEFLUSH_H
-
-/*
- *  Caches are broken on SH-4 (unless we use write-through
- *  caching; in which case they're only semi-broken),
- *  so we need them.
- */
-void flush_cache_all(void);
-void flush_dcache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
-		      unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len);
-
-#define flush_icache_page(vma,pg)		do { } while (0)
-
-/* Initialization of P3 area for copy_user_page */
-void p3_cache_init(void);
-
-#define PG_mapped	PG_arch_1
-
-#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
index 0ed5178fed69..f0886bc880e0 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
@@ -16,7 +16,8 @@
 #define DMAE0_IRQ	38
 #define SH_DMAC_BASE0	0xFF608020
 #define SH_DMARS_BASE	0xFF609000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 #define DMTE0_IRQ	48	/* DMAC0A*/
 #define DMTE4_IRQ	40	/* DMAC0B */
 #define DMTE6_IRQ	42
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
index ccf1d999db6d..e1e90960ee9a 100644
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -22,6 +22,10 @@
 #define MSTPCR0			0xa4150030
 #define MSTPCR1			0xa4150034
 #define MSTPCR2			0xa4150038
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+#define	FRQCR			0xffc80000
+#define	OSCCR			0xffc80018
+#define	PLLCR			0xffc80024
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define	FRQCR			0xffc80000
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
index 738ea43c5038..48560407cbe1 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h
@@ -221,4 +221,18 @@ enum {
 	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
 };
 
+enum {
+	HWBLK_UNKNOWN = 0,
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_URAM, HWBLK_XYMEM,
+	HWBLK_INTC, HWBLK_DMAC, HWBLK_SHYWAY, HWBLK_HUDI,
+	HWBLK_UBC, HWBLK_TMU, HWBLK_CMT, HWBLK_RWDT, HWBLK_FLCTL,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SIO,
+	HWBLK_SIOF0, HWBLK_SIOF1, HWBLK_IIC, HWBLK_RTC,
+	HWBLK_TPU, HWBLK_IRDA, HWBLK_SDHI, HWBLK_SIM, HWBLK_KEYSC,
+	HWBLK_TSIF, HWBLK_USBF, HWBLK_2DG, HWBLK_SIU, HWBLK_VOU,
+	HWBLK_JPU, HWBLK_BEU, HWBLK_CEU, HWBLK_VEU, HWBLK_VPU,
+	HWBLK_LCDC,
+	HWBLK_NR,
+};
+
 #endif /* __ASM_SH7722_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h
index 14c8ca936781..9b36fae72324 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7723.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7723.h
@@ -265,4 +265,21 @@ enum {
 	GPIO_FN_IDEA1, GPIO_FN_IDEA0,
 };
 
+enum {
+	HWBLK_UNKNOWN = 0,
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_L2C, HWBLK_ILMEM, HWBLK_FPU,
+	HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
+	HWBLK_HUDI, HWBLK_DBG, HWBLK_UBC, HWBLK_SUBC,
+	HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
+	HWBLK_FLCTL,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2,
+	HWBLK_SCIF3, HWBLK_SCIF4, HWBLK_SCIF5,
+	HWBLK_MSIOF0, HWBLK_MSIOF1, HWBLK_MERAM, HWBLK_IIC, HWBLK_RTC,
+	HWBLK_ATAPI, HWBLK_ADC, HWBLK_TPU, HWBLK_IRDA, HWBLK_TSIF, HWBLK_ICB,
+	HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_KEYSC, HWBLK_USB,
+	HWBLK_2DG, HWBLK_SIU, HWBLK_VEU2H1, HWBLK_VOU, HWBLK_BEU, HWBLK_CEU,
+	HWBLK_VEU2H0, HWBLK_VPU, HWBLK_LCDC,
+	HWBLK_NR,
+};
+
 #endif /* __ASM_SH7723_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index 66fd1184359e..0cd1f71a1116 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -266,4 +266,21 @@ enum {
 	GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
 };
 
+enum {
+	HWBLK_UNKNOWN = 0,
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_RSMEM, HWBLK_ILMEM, HWBLK_L2C,
+	HWBLK_FPU, HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
+	HWBLK_HUDI, HWBLK_DBG, HWBLK_UBC,
+	HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SCIF3,
+	HWBLK_SCIF4, HWBLK_SCIF5, HWBLK_MSIOF0, HWBLK_MSIOF1,
+	HWBLK_KEYSC, HWBLK_RTC, HWBLK_IIC0, HWBLK_IIC1,
+	HWBLK_MMC, HWBLK_ETHER, HWBLK_ATAPI, HWBLK_TPU, HWBLK_IRDA,
+	HWBLK_TSIF, HWBLK_USB1, HWBLK_USB0, HWBLK_2DG,
+	HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_VEU1, HWBLK_CEU1, HWBLK_BEU1,
+	HWBLK_2DDMAC, HWBLK_SPU, HWBLK_JPU, HWBLK_VOU,
+	HWBLK_BEU0, HWBLK_CEU0,	HWBLK_VEU0, HWBLK_VPU, HWBLK_LCDC,
+	HWBLK_NR,
+};
+
 #endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h
new file mode 100644
index 000000000000..f4d267efad71
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h
@@ -0,0 +1,243 @@
+#ifndef __ASM_SH7757_H__
+#define __ASM_SH7757_H__
+
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+	GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+	GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+	GPIO_PTG7, GPIO_PTG6, GPIO_PTG5, GPIO_PTG4,
+	GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTI */
+	GPIO_PTI7, GPIO_PTI6, GPIO_PTI5, GPIO_PTI4,
+	GPIO_PTI3, GPIO_PTI2, GPIO_PTI1, GPIO_PTI0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ4,
+	GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+		   GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTO */
+	GPIO_PTO7, GPIO_PTO6, GPIO_PTO5, GPIO_PTO4,
+	GPIO_PTO3, GPIO_PTO2, GPIO_PTO1, GPIO_PTO0,
+
+	/* PTP */
+		   GPIO_PTP6, GPIO_PTP5, GPIO_PTP4,
+	GPIO_PTP3, GPIO_PTP2, GPIO_PTP1, GPIO_PTP0,
+
+	/* PTQ */
+		   GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS7, GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+	GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+			      GPIO_PTT5, GPIO_PTT4,
+	GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
+	GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+	GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+	GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+	GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+	GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+	GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+
+	/* PTA (mobule: LBSC, CPG, LPC) */
+	GPIO_FN_BS,	GPIO_FN_RDWR,	GPIO_FN_WE1,	GPIO_FN_RDY,
+	GPIO_FN_MD10,	GPIO_FN_MD9,	GPIO_FN_MD8,
+	GPIO_FN_LGPIO7,	GPIO_FN_LGPIO6,	GPIO_FN_LGPIO5,	GPIO_FN_LGPIO4,
+	GPIO_FN_LGPIO3,	GPIO_FN_LGPIO2,	GPIO_FN_LGPIO1,	GPIO_FN_LGPIO0,
+
+	/* PTB (mobule: LBSC, EtherC, SIM, LPC) */
+	GPIO_FN_D15,	GPIO_FN_D14,	GPIO_FN_D13,	GPIO_FN_D12,
+	GPIO_FN_D11,	GPIO_FN_D10,	GPIO_FN_D9,	GPIO_FN_D8,
+	GPIO_FN_ET0_MDC,		GPIO_FN_ET0_MDIO,
+	GPIO_FN_ET1_MDC,		GPIO_FN_ET1_MDIO,
+	GPIO_FN_SIM_D,	GPIO_FN_SIM_CLK,		GPIO_FN_SIM_RST,
+	GPIO_FN_WPSZ1,	GPIO_FN_WPSZ0,	GPIO_FN_FWID,	GPIO_FN_FLSHSZ,
+	GPIO_FN_LPC_SPIEN,		GPIO_FN_BASEL,
+
+	/* PTC (mobule: SD) */
+	GPIO_FN_SD_WP,	GPIO_FN_SD_CD,	GPIO_FN_SD_CLK,	GPIO_FN_SD_CMD,
+	GPIO_FN_SD_D3,	GPIO_FN_SD_D2,	GPIO_FN_SD_D1,	GPIO_FN_SD_D0,
+
+	/* PTD (mobule: INTC, SPI0, LBSC, CPG, ADC) */
+	GPIO_FN_IRQ7,	GPIO_FN_IRQ6,	GPIO_FN_IRQ5,	GPIO_FN_IRQ4,
+	GPIO_FN_IRQ3,	GPIO_FN_IRQ2,	GPIO_FN_IRQ1,	GPIO_FN_IRQ0,
+	GPIO_FN_MD6,	GPIO_FN_MD5,	GPIO_FN_MD3,	GPIO_FN_MD2,
+	GPIO_FN_MD1,	GPIO_FN_MD0,	GPIO_FN_ADTRG1,	GPIO_FN_ADTRG0,
+
+	/* PTE (mobule: EtherC) */
+	GPIO_FN_ET0_CRS_DV,		GPIO_FN_ET0_TXD1,
+	GPIO_FN_ET0_TXD0,		GPIO_FN_ET0_TX_EN,
+	GPIO_FN_ET0_REF_CLK,		GPIO_FN_ET0_RXD1,
+	GPIO_FN_ET0_RXD0,		GPIO_FN_ET0_RX_ER,
+
+	/* PTF (mobule: EtherC) */
+	GPIO_FN_ET1_CRS_DV,		GPIO_FN_ET1_TXD1,
+	GPIO_FN_ET1_TXD0,		GPIO_FN_ET1_TX_EN,
+	GPIO_FN_ET1_REF_CLK,		GPIO_FN_ET1_RXD1,
+	GPIO_FN_ET1_RXD0,		GPIO_FN_ET1_RX_ER,
+
+	/* PTG (mobule: SYSTEM, PWMX, LPC) */
+	GPIO_FN_STATUS0,		GPIO_FN_STATUS1,
+	GPIO_FN_PWX0,	GPIO_FN_PWX1,	GPIO_FN_PWX2,	GPIO_FN_PWX3,
+	GPIO_FN_SERIRQ,	GPIO_FN_CLKRUN,	GPIO_FN_LPCPD,	GPIO_FN_LDRQ,
+
+	/* PTH (mobule: TMU, SCIF234, SPI1, SPI0) */
+	GPIO_FN_TCLK,	GPIO_FN_RXD4,	GPIO_FN_TXD4,
+	GPIO_FN_SP1_MOSI,		GPIO_FN_SP1_MISO,
+	GPIO_FN_SP1_SCK,		GPIO_FN_SP1_SCK_FB,
+	GPIO_FN_SP1_SS0,		GPIO_FN_SP1_SS1,
+	GPIO_FN_SP0_SS1,
+
+	/* PTI (mobule: INTC) */
+	GPIO_FN_IRQ15,	GPIO_FN_IRQ14,	GPIO_FN_IRQ13,	GPIO_FN_IRQ12,
+	GPIO_FN_IRQ11,	GPIO_FN_IRQ10,	GPIO_FN_IRQ9,	GPIO_FN_IRQ8,
+
+	/* PTJ (mobule: SCIF234, SERMUX) */
+	GPIO_FN_RXD3,	GPIO_FN_TXD3,	GPIO_FN_RXD2,	GPIO_FN_TXD2,
+	GPIO_FN_COM1_TXD,		GPIO_FN_COM1_RXD,
+	GPIO_FN_COM1_RTS,		GPIO_FN_COM1_CTS,
+
+	/* PTK (mobule: SERMUX) */
+	GPIO_FN_COM2_TXD,		GPIO_FN_COM2_RXD,
+	GPIO_FN_COM2_RTS,		GPIO_FN_COM2_CTS,
+	GPIO_FN_COM2_DTR,		GPIO_FN_COM2_DSR,
+	GPIO_FN_COM2_DCD,		GPIO_FN_COM2_RI,
+
+	/* PTL (mobule: SERMUX) */
+	GPIO_FN_RAC_TXD,		GPIO_FN_RAC_RXD,
+	GPIO_FN_RAC_RTS,		GPIO_FN_RAC_CTS,
+	GPIO_FN_RAC_DTR,		GPIO_FN_RAC_DSR,
+	GPIO_FN_RAC_DCD,		GPIO_FN_RAC_RI,
+
+	/* PTM (mobule: IIC, LPC) */
+	GPIO_FN_SDA6,	GPIO_FN_SCL6,	GPIO_FN_SDA7,	GPIO_FN_SCL7,
+	GPIO_FN_WP,	GPIO_FN_FMS0,	GPIO_FN_FMS1,
+
+	/* PTN (mobule: SCIF234, EVC) */
+	GPIO_FN_SCK2,	GPIO_FN_RTS4,	GPIO_FN_RTS3,	GPIO_FN_RTS2,
+	GPIO_FN_CTS4,	GPIO_FN_CTS3,	GPIO_FN_CTS2,
+	GPIO_FN_EVENT7,	GPIO_FN_EVENT6,	GPIO_FN_EVENT5,	GPIO_FN_EVENT4,
+	GPIO_FN_EVENT3,	GPIO_FN_EVENT2,	GPIO_FN_EVENT1,	GPIO_FN_EVENT0,
+
+	/* PTO (mobule: SGPIO) */
+	GPIO_FN_SGPIO0_CLK,		GPIO_FN_SGPIO0_LOAD,
+	GPIO_FN_SGPIO0_DI,		GPIO_FN_SGPIO0_DO,
+	GPIO_FN_SGPIO1_CLK,		GPIO_FN_SGPIO1_LOAD,
+	GPIO_FN_SGPIO1_DI,		GPIO_FN_SGPIO1_DO,
+
+	/* PTP (mobule: JMC, SCIF234) */
+	GPIO_FN_JMCTCK,	GPIO_FN_JMCTMS,	GPIO_FN_JMCTDO,	GPIO_FN_JMCTDI,
+	GPIO_FN_JMCRST,	GPIO_FN_SCK4,	GPIO_FN_SCK3,
+
+	/* PTQ (mobule: LPC) */
+	GPIO_FN_LAD3,	GPIO_FN_LAD2,	GPIO_FN_LAD1,	GPIO_FN_LAD0,
+	GPIO_FN_LFRAME,	GPIO_FN_LRESET,	GPIO_FN_LCLK,
+
+	/* PTR (mobule: GRA, IIC) */
+	GPIO_FN_DDC3,	GPIO_FN_DDC2,
+	GPIO_FN_SDA8,	GPIO_FN_SCL8,	GPIO_FN_SDA2,	GPIO_FN_SCL2,
+	GPIO_FN_SDA1,	GPIO_FN_SCL1,	GPIO_FN_SDA0,	GPIO_FN_SCL0,
+
+	/* PTS (mobule: GRA, IIC) */
+	GPIO_FN_DDC1,	GPIO_FN_DDC0,
+	GPIO_FN_SDA9,	GPIO_FN_SCL9,	GPIO_FN_SDA5,	GPIO_FN_SCL5,
+	GPIO_FN_SDA4,	GPIO_FN_SCL4,	GPIO_FN_SDA3,	GPIO_FN_SCL3,
+
+	/* PTT (mobule: SYSTEM, PWMX) */
+	GPIO_FN_AUDSYNC,		GPIO_FN_AUDCK,
+	GPIO_FN_AUDATA3,		GPIO_FN_AUDATA2,
+	GPIO_FN_AUDATA1,		GPIO_FN_AUDATA0,
+	GPIO_FN_PWX7,	GPIO_FN_PWX6,	GPIO_FN_PWX5,	GPIO_FN_PWX4,
+
+	/* PTU (mobule: LBSC, DMAC) */
+	GPIO_FN_CS6,	GPIO_FN_CS5,	GPIO_FN_CS4,	GPIO_FN_CS0,
+	GPIO_FN_RD,	GPIO_FN_WE0,	GPIO_FN_A25,	GPIO_FN_A24,
+	GPIO_FN_DREQ0,	GPIO_FN_DACK0,
+
+	/* PTV (mobule: LBSC, DMAC) */
+	GPIO_FN_A23,	GPIO_FN_A22,	GPIO_FN_A21,	GPIO_FN_A20,
+	GPIO_FN_A19,	GPIO_FN_A18,	GPIO_FN_A17,	GPIO_FN_A16,
+	GPIO_FN_TEND0,	GPIO_FN_DREQ1,	GPIO_FN_DACK1,	GPIO_FN_TEND1,
+
+	/* PTW (mobule: LBSC) */
+	GPIO_FN_A15,	GPIO_FN_A14,	GPIO_FN_A13,	GPIO_FN_A12,
+	GPIO_FN_A11,	GPIO_FN_A10,	GPIO_FN_A9,	GPIO_FN_A8,
+
+	/* PTX (mobule: LBSC) */
+	GPIO_FN_A7,	GPIO_FN_A6,	GPIO_FN_A5,	GPIO_FN_A4,
+	GPIO_FN_A3,	GPIO_FN_A2,	GPIO_FN_A1,	GPIO_FN_A0,
+
+	/* PTY (mobule: LBSC) */
+	GPIO_FN_D7,	GPIO_FN_D6,	GPIO_FN_D5,	GPIO_FN_D4,
+	GPIO_FN_D3,	GPIO_FN_D2,	GPIO_FN_D1,	GPIO_FN_D0,
+};
+
+#endif /* __ASM_SH7757_H__ */
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
deleted file mode 100644
index 5a11f0b7e66a..000000000000
--- a/arch/sh/include/cpu-sh5/cpu/cacheflush.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_CACHEFLUSH_H
-#define __ASM_SH_CPU_SH5_CACHEFLUSH_H
-
-#ifndef __ASSEMBLY__
-
-struct vm_area_struct;
-struct page;
-struct mm_struct;
-
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_sigtramp(unsigned long vaddr);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-			      unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-extern void flush_dcache_page(struct page *pg);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
-				    struct page *page, unsigned long addr,
-				    int len);
-
-#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-#define flush_icache_page(vma, page)	do { } while (0)
-void p3_cache_init(void);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */
-
diff --git a/arch/sh/include/mach-common/mach/migor.h b/arch/sh/include/mach-common/mach/migor.h
deleted file mode 100644
index e451f0229e00..000000000000
--- a/arch/sh/include/mach-common/mach/migor.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-/*
- * linux/include/asm-sh/migor.h
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* GPIO */
-#define PORT_PACR 0xa4050100
-#define PORT_PDCR 0xa4050106
-#define PORT_PECR 0xa4050108
-#define PORT_PHCR 0xa405010e
-#define PORT_PJCR 0xa4050110
-#define PORT_PKCR 0xa4050112
-#define PORT_PLCR 0xa4050114
-#define PORT_PMCR 0xa4050116
-#define PORT_PRCR 0xa405011c
-#define PORT_PTCR 0xa4050140
-#define PORT_PUCR 0xa4050142
-#define PORT_PVCR 0xa4050144
-#define PORT_PWCR 0xa4050146
-#define PORT_PXCR 0xa4050148
-#define PORT_PYCR 0xa405014a
-#define PORT_PZCR 0xa405014c
-#define PORT_PADR 0xa4050120
-#define PORT_PHDR 0xa405012e
-#define PORT_PTDR 0xa4050160
-#define PORT_PWDR 0xa4050166
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRC 0xa405015c
-
-#define PORT_MSELCRB 0xa4050182
-
-#define PORT_PSELA 0xa405014e
-#define PORT_PSELB 0xa4050150
-#define PORT_PSELC 0xa4050152
-#define PORT_PSELD 0xa4050154
-#define PORT_PSELE 0xa4050156
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRB 0xa405015a
-#define PORT_HIZCRC 0xa405015c
-
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS6ABCR 0xfec1001c
-#define BSC_CS4WCR 0xfec10030
-
-#include <video/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
-			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
new file mode 100644
index 000000000000..267e24112d82
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -0,0 +1 @@
+/* do nothing here by default */
diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h
index 90011d435f30..1292ae5c21b3 100644
--- a/arch/sh/include/mach-common/mach/sh7785lcr.h
+++ b/arch/sh/include/mach-common/mach/sh7785lcr.h
@@ -35,6 +35,8 @@
 #define PCA9564_ADDR		0x06000000	/* I2C */
 #define PCA9564_SIZE		0x00000100
 
+#define PCA9564_PROTO_32BIT_ADDR	0x14000000
+
 #define SM107_MEM_ADDR		0x10000000
 #define SM107_MEM_SIZE		0x00e00000
 #define SM107_REG_ADDR		0x13e00000
diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
new file mode 100644
index 000000000000..8b8e4fa1fee9
--- /dev/null
+++ b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
@@ -0,0 +1,82 @@
+LIST "partner-jet-setup.txt"
+LIST "(C) Copyright 2009 Renesas Solutions Corp"
+LIST "Kuninori Morimoto <morimoto.kuninori@renesas.com>"
+LIST "--------------------------------"
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+LIST "--------------------------------"
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "MMU"
+ED 0xff000010, 0x00000004
+
+LIST "setup clocks"
+ED 0xa4150024, 0x00004000
+ED 0xa4150000, 0x8E003508
+ED 0xa4150004, 0x00000000
+
+WAIT 1
+
+LIST "BSC"
+ED 0xff800020, 0xa5a50000
+ED 0xfec10000, 0x00000013
+ED 0xfec10004, 0x11110400
+ED 0xfec10024, 0x00000440
+
+WAIT 1
+
+LIST "setup sdram"
+ED 0xfd000108, 0x00000181
+ED 0xfd000020, 0x015B0002
+ED 0xfd000030, 0x03061502
+ED 0xfd000034, 0x02020102
+ED 0xfd000038, 0x01090305
+ED 0xfd00003c, 0x00000002
+ED 0xfd000008, 0x00000005
+ED 0xfd000018, 0x00000001
+
+WAIT 1
+
+ED 0xfd000014, 0x00000002
+ED 0xfd000060, 0x00020000
+ED 0xfd000060, 0x00030000
+ED 0xfd000060, 0x00010040
+ED 0xfd000060, 0x00000532
+ED 0xfd000014, 0x00000002
+ED 0xfd000014, 0x00000004
+ED 0xfd000014, 0x00000004
+ED 0xfd000060, 0x00000432
+ED 0xfd000060, 0x000103C0
+ED 0xfd000060, 0x00010040
+
+WAIT 1
+
+ED 0xfd000010, 0x00000001
+ED 0xfd000044, 0x00000613
+ED 0xfd000048, 0x238C003A
+ED 0xfd000014, 0x00000002
+
+LIST "Dummy read"
+DD 0x0c400000, 0x0c400000
+
+ED 0xfd000014, 0x00000002
+ED 0xfd000014, 0x00000004
+ED 0xfd000108, 0x00000080
+ED 0xfd000040, 0x00010000
+
+WAIT 1
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
+
+LIST "disable USB"
+EW 0xA4D80000, 0x0000
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
new file mode 100644
index 000000000000..1c8787ecb1c1
--- /dev/null
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -0,0 +1,20 @@
+/* EcoVec board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+#include <asm/romimage-macros.h>
+#include "partner-jet-setup.txt"
+
+	/* execute icbi after enabling cache */
+	mov.l	1f, r0
+	icbi	@r0
+
+	/* jump to cached area */
+	mova	2f, r0
+	jmp	@r0
+	nop
+
+	.align 2
+1 :	.long 0xa8000000
+2 :
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
new file mode 100644
index 000000000000..174374e19547
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_KFR2R09_H
+#define __ASM_SH_KFR2R09_H
+
+#include <video/sh_mobile_lcdc.h>
+
+#ifdef CONFIG_FB_SH_MOBILE_LCDC
+void kfr2r09_lcd_on(void *board_data);
+void kfr2r09_lcd_off(void *board_data);
+int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+#else
+static inline void kfr2r09_lcd_on(void *board_data) {}
+static inline void kfr2r09_lcd_off(void *board_data) {}
+static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+				    struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __ASM_SH_KFR2R09_H */
diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
new file mode 100644
index 000000000000..3a65503714ee
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
@@ -0,0 +1,143 @@
+LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
+LIST "set up enough of the kfr2r09 hardware to boot the kernel"
+
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "invalidate instruction cache"
+ED 0xff00001c, 0x00000800
+
+LIST "invalidate TLBs"
+ED 0xff000010, 0x00000004
+
+LIST "select mode for cs5 + cs6"
+ED 0xff800020, 0xa5a50001
+ED 0xfec10000, 0x0000001b
+
+LIST "setup clocks"
+LIST "The PLL and FLL values are updated here for the optimal"
+LIST "RF frequency and improved reception sensitivity."
+ED 0xa4150004, 0x00000050
+ED 0xa4150000, 0x91053508
+WAIT 1
+ED 0xa4150050, 0x00000340
+ED 0xa4150024, 0x00005000
+
+LIST "setup pins"
+EB 0xa4050120, 0x00
+EB 0xa4050122, 0x00
+EB 0xa4050124, 0x00
+EB 0xa4050126, 0x00
+EB 0xa4050128, 0xA0
+EB 0xa405012A, 0x10
+EB 0xa405012C, 0x00
+EB 0xa405012E, 0x00
+EB 0xa4050130, 0x00
+EB 0xa4050132, 0x00
+EB 0xa4050134, 0x01
+EB 0xa4050136, 0x40
+EB 0xa4050138, 0x00
+EB 0xa405013A, 0x00
+EB 0xa405013C, 0x00
+EB 0xa405013E, 0x20
+EB 0xa4050160, 0x00
+EB 0xa4050162, 0x40
+EB 0xa4050164, 0x03
+EB 0xa4050166, 0x00
+EB 0xa4050168, 0x00
+EB 0xa405016A, 0x00
+EB 0xa405016C, 0x00
+
+EW 0xa405014E, 0x5660
+EW 0xa4050150, 0x0145
+EW 0xa4050152, 0x1550
+EW 0xa4050154, 0x0200
+EW 0xa4050156, 0x0040
+
+EW 0xa4050158, 0x0000
+EW 0xa405015a, 0x0000
+EW 0xa405015c, 0x0000
+EW 0xa405015e, 0x0000
+
+EW 0xa4050180, 0x0000
+EW 0xa4050182, 0x8002
+EW 0xa4050184, 0x0000
+
+EW 0xa405018a, 0x9991
+EW 0xa405018c, 0x8011
+EW 0xa405018e, 0x9550
+
+EW 0xa4050100, 0x0000
+EW 0xa4050102, 0x5540
+EW 0xa4050104, 0x0000
+EW 0xa4050106, 0x0000
+EW 0xa4050108, 0x4550
+EW 0xa405010a, 0x0130
+EW 0xa405010c, 0x0555
+EW 0xa405010e, 0x0000
+EW 0xa4050110, 0x0000
+EW 0xa4050112, 0xAAA8
+EW 0xa4050114, 0x8305
+EW 0xa4050116, 0x10F0
+EW 0xa4050118, 0x0F50
+EW 0xa405011a, 0x0000
+EW 0xa405011c, 0x0000
+EW 0xa405011e, 0x0555
+EW 0xa4050140, 0x0000
+EW 0xa4050142, 0x5141
+EW 0xa4050144, 0x5005
+EW 0xa4050146, 0xAAA9
+EW 0xa4050148, 0xFAA9
+EW 0xa405014a, 0x3000
+EW 0xa405014c, 0x0000
+
+LIST "setup sdram"
+ED 0xFD000108, 0x40000301
+ED 0xFD000020, 0x011B0002
+ED 0xFD000030, 0x03060E02
+ED 0xFD000034, 0x01020102
+ED 0xFD000038, 0x01090406
+ED 0xFD000008, 0x00000004
+ED 0xFD000040, 0x00000001
+ED 0xFD000040, 0x00000000
+ED 0xFD000018, 0x00000001
+
+WAIT 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000060, 0x00000032
+ED 0xFD000060, 0x00020000
+ED 0xFD000014, 0x00000004
+ED 0xFD000014, 0x00000004
+ED 0xFD000010, 0x00000001
+ED 0xFD000044, 0x000004AF
+ED 0xFD000048, 0x20CF0037
+
+LIST "read 16 bytes from sdram"
+DD 0xa8000000, 0xa8000000, 1
+DD 0xa8000004, 0xa8000004, 1
+DD 0xa8000008, 0xa8000008, 1
+DD 0xa800000c, 0xa800000c, 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000014, 0x00000004
+ED 0xFD000108, 0x40000300
+ED 0xFD000040, 0x00010000
+
+LIST "write to internal ram"
+ED 0xfd8007fc, 0
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
new file mode 100644
index 000000000000..a110823f2bde
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -0,0 +1,20 @@
+/* kfr2r09 board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+#include <asm/romimage-macros.h>
+#include "partner-jet-setup.txt"
+
+	/* execute icbi after enabling cache */
+	mov.l	1f, r0
+	icbi	@r0
+
+	/* jump to cached area */
+	mova	2f, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+1:	.long 0xa8000000
+2:
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
new file mode 100644
index 000000000000..cee6cb88e020
--- /dev/null
+++ b/arch/sh/include/mach-migor/mach/migor.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+#define PORT_MSELCRB 0xa4050182
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS6ABCR 0xfec1001c
+#define BSC_CS4WCR 0xfec10030
+
+#include <video/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 349d833deab5..a2d0a40f3848 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -1,5 +1,41 @@
-ifeq ($(CONFIG_SUPERH32),y)
-include ${srctree}/arch/sh/kernel/Makefile_32
-else
-include ${srctree}/arch/sh/kernel/Makefile_64
+#
+# Makefile for the Linux/SuperH kernel.
+#
+
+extra-y	:= head_$(BITS).o init_task.o vmlinux.lds
+
+ifdef CONFIG_FUNCTION_TRACER
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_ftrace.o = -pg
 endif
+
+obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
+	   machvec.o nmi_debug.o process_$(BITS).o ptrace_$(BITS).o	\
+	   setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o		\
+	   syscalls_$(BITS).o time.o topology.o traps.o			\
+	   traps_$(BITS).o unwinder.o
+
+obj-y				+= cpu/
+obj-$(CONFIG_VSYSCALL)		+= vsyscall/
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
+obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
+obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
+obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o
+obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
+
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
deleted file mode 100644
index 9411e3e31e68..000000000000
--- a/arch/sh/kernel/Makefile_32
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Makefile for the Linux/SuperH kernel.
-#
-
-extra-y	:= head_32.o init_task.o vmlinux.lds
-
-ifdef CONFIG_FUNCTION_TRACER
-# Do not profile debug and lowlevel utilities
-CFLAGS_REMOVE_ftrace.o = -pg
-endif
-
-obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o			\
-	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
-	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o	\
-	   traps.o traps_32.o
-
-obj-y				+= cpu/
-obj-$(CONFIG_VSYSCALL)		+= vsyscall/
-obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
-obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
-obj-$(CONFIG_MODULES)		+= sh_ksyms_32.o module.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
-obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
-obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o
-
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
deleted file mode 100644
index 67b9f6c6326b..000000000000
--- a/arch/sh/kernel/Makefile_64
+++ /dev/null
@@ -1,19 +0,0 @@
-extra-y	:= head_64.o init_task.o vmlinux.lds
-
-obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
-	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
-	   syscalls_64.o time.o topology.o traps.o traps_64.o
-
-obj-y				+= cpu/
-obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
-obj-$(CONFIG_MODULES)		+= sh_ksyms_64.o module.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
-
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
index 99aceb28ee24..d218e808294e 100644
--- a/arch/sh/kernel/asm-offsets.c
+++ b/arch/sh/kernel/asm-offsets.c
@@ -26,6 +26,7 @@ int main(void)
 	DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
 	DEFINE(TI_PRE_COUNT,	offsetof(struct thread_info, preempt_count));
 	DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block));
+	DEFINE(TI_SIZE,		sizeof(struct thread_info));
 
 #ifdef CONFIG_HIBERNATION
 	DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index eecad7cbd61e..3d6b9312dc47 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -19,4 +19,4 @@ obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o
 obj-$(CONFIG_SH_CLK_CPG)	+= clock-cpg.o
 
-obj-y	+= irq/ init.o clock.o
+obj-y	+= irq/ init.o clock.o hwblk.o
diff --git a/arch/sh/kernel/cpu/hwblk.c b/arch/sh/kernel/cpu/hwblk.c
new file mode 100644
index 000000000000..c0ad7d46e784
--- /dev/null
+++ b/arch/sh/kernel/cpu/hwblk.c
@@ -0,0 +1,155 @@
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <asm/clock.h>
+
+static DEFINE_SPINLOCK(hwblk_lock);
+
+static void hwblk_area_mod_cnt(struct hwblk_info *info,
+			       int area, int counter, int value, int goal)
+{
+	struct hwblk_area *hap = info->areas + area;
+
+	hap->cnt[counter] += value;
+
+	if (hap->cnt[counter] != goal)
+		return;
+
+	if (hap->flags & HWBLK_AREA_FLAG_PARENT)
+		hwblk_area_mod_cnt(info, hap->parent, counter, value, goal);
+}
+
+
+static int __hwblk_mod_cnt(struct hwblk_info *info, int hwblk,
+			  int counter, int value, int goal)
+{
+	struct hwblk *hp = info->hwblks + hwblk;
+
+	hp->cnt[counter] += value;
+	if (hp->cnt[counter] == goal)
+		hwblk_area_mod_cnt(info, hp->area, counter, value, goal);
+
+	return hp->cnt[counter];
+}
+
+static void hwblk_mod_cnt(struct hwblk_info *info, int hwblk,
+			  int counter, int value, int goal)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hwblk_lock, flags);
+	__hwblk_mod_cnt(info, hwblk, counter, value, goal);
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+void hwblk_cnt_inc(struct hwblk_info *info, int hwblk, int counter)
+{
+	hwblk_mod_cnt(info, hwblk, counter, 1, 1);
+}
+
+void hwblk_cnt_dec(struct hwblk_info *info, int hwblk, int counter)
+{
+	hwblk_mod_cnt(info, hwblk, counter, -1, 0);
+}
+
+void hwblk_enable(struct hwblk_info *info, int hwblk)
+{
+	struct hwblk *hp = info->hwblks + hwblk;
+	unsigned long tmp;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&hwblk_lock, flags);
+
+	ret = __hwblk_mod_cnt(info, hwblk, HWBLK_CNT_USAGE, 1, 1);
+	if (ret == 1) {
+		tmp = __raw_readl(hp->mstp);
+		tmp &= ~(1 << hp->bit);
+		__raw_writel(tmp, hp->mstp);
+	}
+
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+void hwblk_disable(struct hwblk_info *info, int hwblk)
+{
+	struct hwblk *hp = info->hwblks + hwblk;
+	unsigned long tmp;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&hwblk_lock, flags);
+
+	ret = __hwblk_mod_cnt(info, hwblk, HWBLK_CNT_USAGE, -1, 0);
+	if (ret == 0) {
+		tmp = __raw_readl(hp->mstp);
+		tmp |= 1 << hp->bit;
+		__raw_writel(tmp, hp->mstp);
+	}
+
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+struct hwblk_info *hwblk_info;
+
+int __init hwblk_register(struct hwblk_info *info)
+{
+	hwblk_info = info;
+	return 0;
+}
+
+int __init __weak arch_hwblk_init(void)
+{
+	return 0;
+}
+
+int __weak arch_hwblk_sleep_mode(void)
+{
+	return SUSP_SH_SLEEP;
+}
+
+int __init hwblk_init(void)
+{
+	return arch_hwblk_init();
+}
+
+/* allow clocks to enable and disable hardware blocks */
+static int sh_hwblk_clk_enable(struct clk *clk)
+{
+	if (!hwblk_info)
+		return -ENOENT;
+
+	hwblk_enable(hwblk_info, clk->arch_flags);
+	return 0;
+}
+
+static void sh_hwblk_clk_disable(struct clk *clk)
+{
+	if (hwblk_info)
+		hwblk_disable(hwblk_info, clk->arch_flags);
+}
+
+static struct clk_ops sh_hwblk_clk_ops = {
+	.enable		= sh_hwblk_clk_enable,
+	.disable	= sh_hwblk_clk_disable,
+	.recalc		= followparent_recalc,
+};
+
+int __init sh_hwblk_clk_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	int ret = 0;
+	int k;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+		clkp->ops = &sh_hwblk_clk_ops;
+		ret |= clk_register(clkp);
+	}
+
+	return ret;
+}
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index ad85421099cd..e932ebef4738 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -3,7 +3,7 @@
  *
  * CPU init code
  *
- * Copyright (C) 2002 - 2007  Paul Mundt
+ * Copyright (C) 2002 - 2009  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -62,6 +62,37 @@ static void __init speculative_execution_init(void)
 #define speculative_execution_init()	do { } while (0)
 #endif
 
+#ifdef CONFIG_CPU_SH4A
+#define EXPMASK			0xff2f0004
+#define EXPMASK_RTEDS		(1 << 0)
+#define EXPMASK_BRDSSLP		(1 << 1)
+#define EXPMASK_MMCAW		(1 << 4)
+
+static void __init expmask_init(void)
+{
+	unsigned long expmask = __raw_readl(EXPMASK);
+
+	/*
+	 * Future proofing.
+	 *
+	 * Disable support for slottable sleep instruction
+	 * and non-nop instructions in the rte delay slot.
+	 */
+	expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP);
+
+	/*
+	 * Enable associative writes to the memory-mapped cache array
+	 * until the cache flush ops have been rewritten.
+	 */
+	expmask |= EXPMASK_MMCAW;
+
+	__raw_writel(expmask, EXPMASK);
+	ctrl_barrier();
+}
+#else
+#define expmask_init()	do { } while (0)
+#endif
+
 /* 2nd-level cache init */
 void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
 {
@@ -268,11 +299,9 @@ asmlinkage void __init sh_cpu_init(void)
 	cache_init();
 
 	if (raw_smp_processor_id() == 0) {
-#ifdef CONFIG_MMU
 		shm_align_mask = max_t(unsigned long,
 				       current_cpu_data.dcache.way_size - 1,
 				       PAGE_SIZE - 1);
-#endif
 
 		/* Boot CPU sets the cache shape */
 		detect_cache_shape();
@@ -321,4 +350,5 @@ asmlinkage void __init sh_cpu_init(void)
 #endif
 
 	speculative_execution_init();
+	expmask_init();
 }
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 808d99a48efb..c1508a90fc6a 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -35,6 +35,7 @@ static void disable_ipr_irq(unsigned int irq)
 	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set the priority in IPR to 0 */
 	__raw_writew(__raw_readw(addr) & (0xffff ^ (0xf << p->shift)), addr);
+	(void)__raw_readw(addr);	/* Read back to flush write posting */
 }
 
 static void enable_ipr_irq(unsigned int irq)
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index becc54c45692..c8a4331d9b8d 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -227,8 +227,9 @@ ENTRY(sh_bios_handler)
 	mov.l	@r15+, r14
 	add	#8,r15
 	lds.l	@r15+, pr
+	mov.l	@r15+,r15
 	rte
-	 mov.l	@r15+,r15
+	 nop
 	.align	2
 1:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 5916d9096b99..1db6d8883888 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -29,6 +29,7 @@ int __init detect_cpu_and_cache_system(void)
 	 */
 	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
 	boot_cpu_data.icache = boot_cpu_data.dcache;
+	boot_cpu_data.family = CPU_FAMILY_SH2;
 
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
index ab3903eeda5c..222742ddc0d6 100644
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -176,8 +176,9 @@ ENTRY(sh_bios_handler)
 	movml.l	@r15+,r14
 	add	#8,r15
 	lds.l	@r15+, pr
+	mov.l	@r15+,r15
 	rte
-	 mov.l	@r15+,r15
+	 nop
 	.align	2
 1:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
index e098e2f6aa08..6825d6507164 100644
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ b/arch/sh/kernel/cpu/sh2a/probe.c
@@ -15,6 +15,8 @@
 
 int __init detect_cpu_and_cache_system(void)
 {
+	boot_cpu_data.family			= CPU_FAMILY_SH2A;
+
 	/* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
 	boot_cpu_data.flags			|= CPU_HAS_OP32;
 
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
index fa30b6017730..e8749505bd2a 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -22,13 +22,6 @@ static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
 static int ifc_divisors[]    = { 1, 2, 4, 1, 3, 1, 1, 1 };
 static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
 
-static void set_bus_parent(struct clk *clk)
-{
-	struct clk *bus_clk = clk_get(NULL, "bus_clk");
-	clk->parent = bus_clk;
-	clk_put(bus_clk);
-}
-
 static void master_clk_init(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
@@ -50,9 +43,6 @@ static unsigned long module_clk_recalc(struct clk *clk)
 }
 
 static struct clk_ops sh7709_module_clk_ops = {
-#ifdef CLOCK_MODE_0_1_2_7
-	.init		= set_bus_parent,
-#endif
 	.recalc		= module_clk_recalc,
 };
 
@@ -78,7 +68,6 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 }
 
 static struct clk_ops sh7709_cpu_clk_ops = {
-	.init		= set_bus_parent,
 	.recalc		= cpu_clk_recalc,
 };
 
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 3cb531f233f2..0151933e5253 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -53,10 +53,6 @@
  *	syscall #
  *
  */
-#if defined(CONFIG_KGDB)
-NMI_VEC = 0x1c0			! Must catch early for debounce
-#endif
-
 /* Offsets to the stack */
 OFF_R0  =  0		/* Return value. New ABI also arg4 */
 OFF_R1  =  4     	/* New ABI: arg5 */
@@ -71,7 +67,6 @@ OFF_PC  =  (16*4)
 OFF_SR	=  (16*4+8)
 OFF_TRA	=  (16*4+6*4)
 
-
 #define k0	r0
 #define k1	r1
 #define k2	r2
@@ -113,34 +108,34 @@ OFF_TRA	=  (16*4+6*4)
 #if defined(CONFIG_MMU)
 	.align	2
 ENTRY(tlb_miss_load)
-	bra	call_dpf
+	bra	call_handle_tlbmiss
 	 mov	#0, r5
 
 	.align	2
 ENTRY(tlb_miss_store)
-	bra	call_dpf
+	bra	call_handle_tlbmiss
 	 mov	#1, r5
 
 	.align	2
 ENTRY(initial_page_write)
-	bra	call_dpf
-	 mov	#1, r5
+	bra	call_handle_tlbmiss
+	 mov	#2, r5
 
 	.align	2
 ENTRY(tlb_protection_violation_load)
-	bra	call_dpf
+	bra	call_do_page_fault
 	 mov	#0, r5
 
 	.align	2
 ENTRY(tlb_protection_violation_store)
-	bra	call_dpf
+	bra	call_do_page_fault
 	 mov	#1, r5
 
-call_dpf:
+call_handle_tlbmiss:
+	setup_frame_reg
 	mov.l	1f, r0
 	mov	r5, r8
 	mov.l	@r0, r6
-	mov	r6, r9
 	mov.l	2f, r0
 	sts	pr, r10
 	jsr	@r0
@@ -151,16 +146,25 @@ call_dpf:
 	 lds	r10, pr
 	rts
 	 nop
-0:	mov.l	3f, r0
-	mov	r9, r6
+0:
 	mov	r8, r5
+call_do_page_fault:
+	mov.l	1f, r0
+	mov.l	@r0, r6
+
+	sti
+
+	mov.l	3f, r0
+	mov.l	4f, r1
+	mov	r15, r4
 	jmp	@r0
-	 mov	r15, r4
+	 lds	r1, pr
 
 	.align 2
 1:	.long	MMU_TEA
-2:	.long	__do_page_fault
+2:	.long	handle_tlbmiss
 3:	.long	do_page_fault
+4:	.long	ret_from_exception
 
 	.align	2
 ENTRY(address_error_load)
@@ -256,7 +260,7 @@ restore_all:
 	!
 	! Calculate new SR value
 	mov	k3, k2			! original SR value
-	mov	#0xf0, k1
+	mov	#0xfffffff0, k1
 	extu.b	k1, k1
 	not	k1, k1
 	and	k1, k2			! Mask original SR value
@@ -272,21 +276,12 @@ restore_all:
 6:	or	k0, k2			! Set the IMASK-bits
 	ldc	k2, ssr
 	!
-#if defined(CONFIG_KGDB)
-	! Clear in_nmi
-	mov.l	6f, k0
-	mov	#0, k1
-	mov.b	k1, @k0
-#endif
 	mov	k4, r15
 	rte
 	 nop
 
 	.align	2
 5:	.long	0x00001000	! DSP
-#ifdef CONFIG_KGDB
-6:	.long	in_nmi
-#endif
 7:	.long	0x30000000
 
 ! common exception handler
@@ -478,23 +473,6 @@ ENTRY(save_low_regs)
 !
 	.balign 	512,0,512
 ENTRY(handle_interrupt)
-#if defined(CONFIG_KGDB)
-	mov.l	2f, k2
-	! Debounce (filter nested NMI)
-	mov.l	@k2, k0
-	mov.l	9f, k1
-	cmp/eq	k1, k0
-	bf	11f
-	mov.l	10f, k1
-	tas.b	@k1
-	bt	11f
-	rte
-	 nop
-	.align	2
-9:	.long	NMI_VEC
-10:	.long	in_nmi
-11:
-#endif /* defined(CONFIG_KGDB) */
 	sts	pr, k3		! save original pr value in k3
 	mova	exception_data, k0
 
@@ -507,13 +485,49 @@ ENTRY(handle_interrupt)
 	bsr	save_regs	! needs original pr value in k3
 	 mov	#-1, k2		! default vector kept in k2
 
+	setup_frame_reg
+
+	stc	sr, r0	! get status register
+	shlr2	r0
+	and	#0x3c, r0
+	cmp/eq	#0x3c, r0
+	bf	9f
+	TRACE_IRQS_OFF
+9:
+
 	! Setup return address and jump to do_IRQ
 	mov.l	4f, r9		! fetch return address
 	lds	r9, pr		! put return address in pr
 	mov.l	2f, r4
 	mov.l	3f, r9
 	mov.l	@r4, r4		! pass INTEVT vector as arg0
+
+	shlr2	r4
+	shlr	r4
+	mov	r4, r0		! save vector->jmp table offset for later
+
+	shlr2	r4		! vector to IRQ# conversion
+	add	#-0x10, r4
+
+	cmp/pz	r4		! is it a valid IRQ?
+	bt	10f
+
+	/*
+	 * We got here as a result of taking the INTEVT path for something
+	 * that isn't a valid hard IRQ, therefore we bypass the do_IRQ()
+	 * path and special case the event dispatch instead.  This is the
+	 * expected path for the NMI (and any other brilliantly implemented
+	 * exception), which effectively wants regular exception dispatch
+	 * but is unfortunately reported through INTEVT rather than
+	 * EXPEVT.  Grr.
+	 */
+	mov.l	6f, r9
+	mov.l	@(r0, r9), r9
 	jmp	@r9
+	 mov	r15, r8		! trap handlers take saved regs in r8
+
+10:
+	jmp	@r9		! Off to do_IRQ() we go.
 	 mov	r15, r5		! pass saved registers as arg1
 
 ENTRY(exception_none)
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index e5a0de39a2db..46610c35c232 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -48,9 +48,7 @@ ENTRY(exception_handling_table)
 	.long	system_call	! Unconditional Trap	 /* 160 */
 	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
-ENTRY(nmi_slot)
-	.long	kgdb_handle_exception	/* 1C0 */	! Allow trap to debugger
-ENTRY(user_break_point_trap)
+	.long	nmi_trap_handler	/* 1C0 */	! Allow trap to debugger
 	.long	break_point_trap	/* 1E0 */
 
 	/*
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index 10f2a760c5ee..f9c7df64eb01 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -107,5 +107,7 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
 	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
 	boot_cpu_data.icache = boot_cpu_data.dcache;
 
+	boot_cpu_data.family = CPU_FAMILY_SH3;
+
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 6c78d0a9c857..d36f0c45f55f 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -57,8 +57,12 @@ int __init detect_cpu_and_cache_system(void)
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
 	if (((pvr >> 16) & 0xff) == 0x10) {
-		if ((cvr & 0x10000000) == 0)
+		boot_cpu_data.family = CPU_FAMILY_SH4A;
+
+		if ((cvr & 0x10000000) == 0) {
 			boot_cpu_data.flags |= CPU_HAS_DSP;
+			boot_cpu_data.family = CPU_FAMILY_SH4AL_DSP;
+		}
 
 		boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
 		boot_cpu_data.cut_major = pvr & 0x7f;
@@ -68,6 +72,7 @@ int __init detect_cpu_and_cache_system(void)
 	} else {
 		/* And some SH-4 defaults.. */
 		boot_cpu_data.flags |= CPU_HAS_PTEA;
+		boot_cpu_data.family = CPU_FAMILY_SH4;
 	}
 
 	/* FPU detection works for everyone */
@@ -139,8 +144,15 @@ int __init detect_cpu_and_cache_system(void)
 		}
 		break;
 	case 0x300b:
-		boot_cpu_data.type = CPU_SH7724;
-		boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+		switch (prr) {
+		case 0x20:
+			boot_cpu_data.type = CPU_SH7724;
+			boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+			break;
+		case 0x50:
+			boot_cpu_data.type = CPU_SH7757;
+			break;
+		}
 		break;
 	case 0x4000:	/* 1st cut */
 	case 0x4001:	/* 2nd cut */
@@ -173,9 +185,6 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.dcache.ways = 2;
 
 		break;
-	default:
-		boot_cpu_data.type = CPU_SH_NONE;
-		break;
 	}
 
 	/*
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index ebdd391d5f42..490d5dc9e372 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -3,6 +3,7 @@
 #
 
 # CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7757)	+= setup-sh7757.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= setup-sh7763.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
@@ -19,15 +20,16 @@ obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 smp-$(CONFIG_CPU_SHX3)			:= smp-shx3.o
 
 # Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SUBTYPE_SH7757)	:= clock-sh7757.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o hwblk-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o hwblk-sh7723.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o hwblk-sh7724.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7366.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
@@ -35,6 +37,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7722)	:= pinmux-sh7722.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7724)	:= pinmux-sh7724.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7757)	:= pinmux-sh7757.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 40f859354f79..ea38b554dc05 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7722.h>
 
 /* SH7722 registers */
 #define FRQCR		0xa4150000
@@ -30,9 +32,6 @@
 #define SCLKBCR		0xa415000c
 #define IRDACLKCR	0xa4150018
 #define PLLCR		0xa4150024
-#define MSTPCR0		0xa4150030
-#define MSTPCR1		0xa4150034
-#define MSTPCR2		0xa4150038
 #define DLLFRQ		0xa4150050
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
@@ -140,35 +139,37 @@ struct clk div6_clks[] = {
 	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _flags) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags)
+#define R_CLK &r_clk
+#define P_CLK &div4_clks[DIV4_P]
+#define B_CLK &div4_clks[DIV4_B]
+#define U_CLK &div4_clks[DIV4_U]
 
 static struct clk mstp_clks[] = {
-	MSTP("uram0", &div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
-	MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0),
-	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0),
-
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0),
-	MSTP("rtc0", &r_clk, MSTPCR1, 8, 0),
-
-	MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0),
-	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0),
-	MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0),
-	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 9, 0),
-	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0),
-	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0),
+	SH_HWBLK_CLK("uram0", -1, U_CLK, HWBLK_URAM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("xymem0", -1, B_CLK, HWBLK_XYMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU, 0),
+	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
+	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
+	SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0),
+	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
+	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
+	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
+
+	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0),
+	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
+
+	SH_HWBLK_CLK("sdhi0", -1, P_CLK, HWBLK_SDHI, 0),
+	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
+	SH_HWBLK_CLK("usbf0", -1, P_CLK, HWBLK_USBF, 0),
+	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
+	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
+	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
+	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, 0),
+	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
+	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU, 0),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
+	SH_HWBLK_CLK("lcdc0", -1, P_CLK, HWBLK_LCDC, 0),
 };
 
 int __init arch_clk_init(void)
@@ -191,7 +192,7 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index e67c2678b8ae..20a31c2255a8 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7723.h>
 
 /* SH7723 registers */
 #define FRQCR		0xa4150000
@@ -30,9 +32,6 @@
 #define SCLKBCR		0xa415000c
 #define IRDACLKCR	0xa4150018
 #define PLLCR		0xa4150024
-#define MSTPCR0		0xa4150030
-#define MSTPCR1		0xa4150034
-#define MSTPCR2		0xa4150038
 #define DLLFRQ		0xa4150050
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
@@ -140,60 +139,64 @@ struct clk div6_clks[] = {
 	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT)
+#define R_CLK (&r_clk)
+#define P_CLK (&div4_clks[DIV4_P])
+#define B_CLK (&div4_clks[DIV4_B])
+#define U_CLK (&div4_clks[DIV4_U])
+#define I_CLK (&div4_clks[DIV4_I])
+#define SH_CLK (&div4_clks[DIV4_SH])
 
 static struct clk mstp_clks[] = {
 	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
-	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0),
-	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0),
-	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0),
-	MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 28, 1, 1, 0),
-	MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0),
-	MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0),
-	MSTP("intc0", &div4_clks[DIV4_I], MSTPCR0, 22, 1, 1, 0),
-	MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1),
-	MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0),
-	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0),
-	MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0),
-	MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1),
-	MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 11, 0, 1, 0),
-	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0),
-	MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0),
-	MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0),
-	MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0),
-	MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0),
-	MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0),
-	MSTP("meram0", &div4_clks[DIV4_SH], MSTPCR0, 0, 1, 1, 0),
-
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0),
-	MSTP("rtc0", &r_clk, MSTPCR1, 8, 0, 0, 0),
-
-	MSTP("atapi0", &div4_clks[DIV4_SH], MSTPCR2, 28, 0, 1, 0),
-	MSTP("adc0", &div4_clks[DIV4_P], MSTPCR2, 27, 0, 1, 0),
-	MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0),
-	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0),
-	MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0),
-	MSTP("icb0", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1),
-	MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0),
-	MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0),
-	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0, 0, 0),
-	MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 11, 0, 1, 0),
-	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 10, 0, 1, 1),
-	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0, 1, 0),
-	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1),
+	SH_HWBLK_CLK("tlb0", -1, I_CLK, HWBLK_TLB, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ic0", -1, I_CLK, HWBLK_IC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("oc0", -1, I_CLK, HWBLK_OC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("l2c0", -1, SH_CLK, HWBLK_L2C, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ilmem0", -1, I_CLK, HWBLK_ILMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("fpu0", -1, I_CLK, HWBLK_FPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("intc0", -1, I_CLK, HWBLK_INTC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("dmac0", -1, B_CLK, HWBLK_DMAC0, 0),
+	SH_HWBLK_CLK("sh0", -1, SH_CLK, HWBLK_SHYWAY, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("hudi0", -1, P_CLK, HWBLK_HUDI, 0),
+	SH_HWBLK_CLK("ubc0", -1, I_CLK, HWBLK_UBC, 0),
+	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU0, 0),
+	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
+	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
+	SH_HWBLK_CLK("dmac1", -1, B_CLK, HWBLK_DMAC1, 0),
+	SH_HWBLK_CLK("tmu1", -1, P_CLK, HWBLK_TMU1, 0),
+	SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0),
+	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
+	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
+	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
+	SH_HWBLK_CLK("scif3", -1, B_CLK, HWBLK_SCIF3, 0),
+	SH_HWBLK_CLK("scif4", -1, B_CLK, HWBLK_SCIF4, 0),
+	SH_HWBLK_CLK("scif5", -1, B_CLK, HWBLK_SCIF5, 0),
+	SH_HWBLK_CLK("msiof0", -1, B_CLK, HWBLK_MSIOF0, 0),
+	SH_HWBLK_CLK("msiof1", -1, B_CLK, HWBLK_MSIOF1, 0),
+	SH_HWBLK_CLK("meram0", -1, SH_CLK, HWBLK_MERAM, 0),
+
+	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0),
+	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
+
+	SH_HWBLK_CLK("atapi0", -1, SH_CLK, HWBLK_ATAPI, 0),
+	SH_HWBLK_CLK("adc0", -1, P_CLK, HWBLK_ADC, 0),
+	SH_HWBLK_CLK("tpu0", -1, B_CLK, HWBLK_TPU, 0),
+	SH_HWBLK_CLK("irda0", -1, P_CLK, HWBLK_IRDA, 0),
+	SH_HWBLK_CLK("tsif0", -1, B_CLK, HWBLK_TSIF, 0),
+	SH_HWBLK_CLK("icb0", -1, B_CLK, HWBLK_ICB, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0),
+	SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0),
+	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
+	SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB, 0),
+	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
+	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
+	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU2H1, 0),
+	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
+	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
+	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU2H0, 0),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
+	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
 };
 
 int __init arch_clk_init(void)
@@ -216,7 +219,7 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 5d5c9b952883..dfe9192be63e 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7724.h>
 
 /* SH7724 registers */
 #define FRQCRA		0xa4150000
@@ -31,9 +33,6 @@
 #define FCLKBCR		0xa415000c
 #define IRDACLKCR	0xa4150018
 #define PLLCR		0xa4150024
-#define MSTPCR0		0xa4150030
-#define MSTPCR1		0xa4150034
-#define MSTPCR2		0xa4150038
 #define SPUCLKCR	0xa415003c
 #define FLLFRQ		0xa4150050
 #define LSTATS		0xa4150060
@@ -128,7 +127,7 @@ struct clk *main_clks[] = {
 	&div3_clk,
 };
 
-static int divisors[] = { 2, 0, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
 
 static struct clk_div_mult_table div4_table = {
 	.divisors = divisors,
@@ -156,64 +155,67 @@ struct clk div6_clks[] = {
 	SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT)
+#define R_CLK (&r_clk)
+#define P_CLK (&div4_clks[DIV4_P])
+#define B_CLK (&div4_clks[DIV4_B])
+#define I_CLK (&div4_clks[DIV4_I])
+#define SH_CLK (&div4_clks[DIV4_SH])
 
 static struct clk mstp_clks[] = {
-	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0),
-	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0),
-	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0),
-	MSTP("rs0", &div4_clks[DIV4_B], MSTPCR0, 28, 1, 1, 0),
-	MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0),
-	MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 26, 1, 1, 0),
-	MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0),
-	MSTP("intc0", &div4_clks[DIV4_P], MSTPCR0, 22, 1, 1, 0),
-	MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1),
-	MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0),
-	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0),
-	MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0),
-	MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1),
-	MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0),
-	MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0),
-	MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0),
-	MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0),
-	MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0),
-	MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0),
-
-	MSTP("keysc0", &r_clk, MSTPCR1, 12, 0, 0, 0),
-	MSTP("rtc0", &r_clk, MSTPCR1, 11, 0, 0, 0),
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0),
-	MSTP("i2c1", &div4_clks[DIV4_P], MSTPCR1, 8, 0, 1, 0),
-
-	MSTP("mmc0", &div4_clks[DIV4_B], MSTPCR2, 29, 0, 1, 0),
-	MSTP("eth0", &div4_clks[DIV4_B], MSTPCR2, 28, 0, 1, 0),
-	MSTP("atapi0", &div4_clks[DIV4_B], MSTPCR2, 26, 0, 1, 0),
-	MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0),
-	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0),
-	MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0),
-	MSTP("usb1", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1),
-	MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 20, 0, 1, 1),
-	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 19, 0, 1, 1),
-	MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0),
-	MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0),
-	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 15, 1, 1, 1),
-	MSTP("ceu1", &div4_clks[DIV4_B], MSTPCR2, 13, 0, 1, 1),
-	MSTP("beu1", &div4_clks[DIV4_B], MSTPCR2, 12, 0, 1, 1),
-	MSTP("2ddmac0", &div4_clks[DIV4_SH], MSTPCR2, 10, 0, 1, 1),
-	MSTP("spu0", &div4_clks[DIV4_B], MSTPCR2, 9, 0, 1, 0),
-	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1),
+	SH_HWBLK_CLK("tlb0", -1, I_CLK, HWBLK_TLB, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ic0", -1, I_CLK, HWBLK_IC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("oc0", -1, I_CLK, HWBLK_OC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("rs0", -1, B_CLK, HWBLK_RSMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ilmem0", -1, I_CLK, HWBLK_ILMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("l2c0", -1, SH_CLK, HWBLK_L2C, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("fpu0", -1, I_CLK, HWBLK_FPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("intc0", -1, P_CLK, HWBLK_INTC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("dmac0", -1, B_CLK, HWBLK_DMAC0, 0),
+	SH_HWBLK_CLK("sh0", -1, SH_CLK, HWBLK_SHYWAY, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("hudi0", -1, P_CLK, HWBLK_HUDI, 0),
+	SH_HWBLK_CLK("ubc0", -1, I_CLK, HWBLK_UBC, 0),
+	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU0, 0),
+	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
+	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
+	SH_HWBLK_CLK("dmac1", -1, B_CLK, HWBLK_DMAC1, 0),
+	SH_HWBLK_CLK("tmu1", -1, P_CLK, HWBLK_TMU1, 0),
+	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
+	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
+	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
+	SH_HWBLK_CLK("scif3", -1, B_CLK, HWBLK_SCIF3, 0),
+	SH_HWBLK_CLK("scif4", -1, B_CLK, HWBLK_SCIF4, 0),
+	SH_HWBLK_CLK("scif5", -1, B_CLK, HWBLK_SCIF5, 0),
+	SH_HWBLK_CLK("msiof0", -1, B_CLK, HWBLK_MSIOF0, 0),
+	SH_HWBLK_CLK("msiof1", -1, B_CLK, HWBLK_MSIOF1, 0),
+
+	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
+	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
+	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC0, 0),
+	SH_HWBLK_CLK("i2c1", -1, P_CLK, HWBLK_IIC1, 0),
+
+	SH_HWBLK_CLK("mmc0", -1, B_CLK, HWBLK_MMC, 0),
+	SH_HWBLK_CLK("eth0", -1, B_CLK, HWBLK_ETHER, 0),
+	SH_HWBLK_CLK("atapi0", -1, B_CLK, HWBLK_ATAPI, 0),
+	SH_HWBLK_CLK("tpu0", -1, B_CLK, HWBLK_TPU, 0),
+	SH_HWBLK_CLK("irda0", -1, P_CLK, HWBLK_IRDA, 0),
+	SH_HWBLK_CLK("tsif0", -1, B_CLK, HWBLK_TSIF, 0),
+	SH_HWBLK_CLK("usb1", -1, B_CLK, HWBLK_USB1, 0),
+	SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB0, 0),
+	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
+	SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0),
+	SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0),
+	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU1, 0),
+	SH_HWBLK_CLK("ceu1", -1, B_CLK, HWBLK_CEU1, 0),
+	SH_HWBLK_CLK("beu1", -1, B_CLK, HWBLK_BEU1, 0),
+	SH_HWBLK_CLK("2ddmac0", -1, SH_CLK, HWBLK_2DDMAC, 0),
+	SH_HWBLK_CLK("spu0", -1, B_CLK, HWBLK_SPU, 0),
+	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, 0),
+	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
+	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU0, 0),
+	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU0, 0),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU0, 0),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
+	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
 };
 
 int __init arch_clk_init(void)
@@ -236,7 +238,7 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
new file mode 100644
index 000000000000..ddc235ca9664
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -0,0 +1,130 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7757.c
+ *
+ * SH7757 support for the clock framework
+ *
+ *  Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+static int ifc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			      16, 1, 1, 32, 1, 1, 1, 1 };
+static int sfc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			      16, 1, 1, 32, 1, 1, 1, 1 };
+static int bfc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			      16, 1, 1, 32, 1, 1, 1, 1 };
+static int p1fc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			       16, 1, 1, 32, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate = CONFIG_SH_PCLK_FREQ * 16;
+}
+
+static struct clk_ops sh7757_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = ctrl_inl(FRQCR) & 0x0000000f;
+	clk->rate = clk->parent->rate / p1fc_divisors[idx];
+}
+
+static struct clk_ops sh7757_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 8) & 0x0000000f;
+	clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7757_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 20) & 0x0000000f;
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7757_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7757_clk_ops[] = {
+	&sh7757_master_clk_ops,
+	&sh7757_module_clk_ops,
+	&sh7757_bus_clk_ops,
+	&sh7757_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7757_clk_ops))
+		*ops = sh7757_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 12) & 0x0000000f;
+	clk->rate = clk->parent->rate / sfc_divisors[idx];
+}
+
+static struct clk_ops sh7757_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk sh7757_shyway_clk = {
+	.name		= "shyway_clk",
+	.flags		= CLK_ENABLE_ON_INIT,
+	.ops		= &sh7757_shyway_clk_ops,
+};
+
+/*
+ * Additional sh7757-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7757_onchip_clocks[] = {
+	&sh7757_shyway_clk,
+};
+
+static int __init sh7757_clk_init(void)
+{
+	struct clk *clk = clk_get(NULL, "master_clk");
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sh7757_onchip_clocks); i++) {
+		struct clk *clkp = sh7757_onchip_clocks[i];
+
+		clkp->parent = clk;
+		clk_register(clkp);
+		clk_enable(clkp);
+	}
+
+	/*
+	 * Now that we have the rest of the clocks registered, we need to
+	 * force the parent clock to propagate so that these clocks will
+	 * automatically figure out their rate. We cheat by handing the
+	 * parent clock its current rate and forcing child propagation.
+	 */
+	clk_set_rate(clk, clk_get_rate(clk));
+
+	clk_put(clk);
+
+	return 0;
+}
+
+arch_initcall(sh7757_clk_init);
+
diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
new file mode 100644
index 000000000000..a288b5d92341
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
@@ -0,0 +1,106 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
+ *
+ * SH7722 hardware block support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7722.h>
+
+/* SH7722 registers */
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+
+/* SH7722 Power Domains */
+enum { CORE_AREA, SUB_AREA, CORE_AREA_BM };
+static struct hwblk_area sh7722_hwblk_area[] = {
+	[CORE_AREA] = HWBLK_AREA(0, 0),
+	[CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA),
+	[SUB_AREA] = HWBLK_AREA(0, 0),
+};
+
+/* Table mapping HWBLK to Module Stop Bit and Power Domain */
+static struct hwblk sh7722_hwblk[HWBLK_NR] = {
+	[HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA),
+	[HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA),
+	[HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA),
+	[HWBLK_URAM] = HWBLK(MSTPCR0, 28, CORE_AREA),
+	[HWBLK_XYMEM] = HWBLK(MSTPCR0, 26, CORE_AREA),
+	[HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA),
+	[HWBLK_DMAC] = HWBLK(MSTPCR0, 21, CORE_AREA_BM),
+	[HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA),
+	[HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA),
+	[HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA),
+	[HWBLK_TMU] = HWBLK(MSTPCR0, 15, CORE_AREA),
+	[HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA),
+	[HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA),
+	[HWBLK_FLCTL] = HWBLK(MSTPCR0, 10, CORE_AREA),
+	[HWBLK_SCIF0] = HWBLK(MSTPCR0, 7, CORE_AREA),
+	[HWBLK_SCIF1] = HWBLK(MSTPCR0, 6, CORE_AREA),
+	[HWBLK_SCIF2] = HWBLK(MSTPCR0, 5, CORE_AREA),
+	[HWBLK_SIO] = HWBLK(MSTPCR0, 3, CORE_AREA),
+	[HWBLK_SIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA),
+	[HWBLK_SIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA),
+
+	[HWBLK_IIC] = HWBLK(MSTPCR1, 9, CORE_AREA),
+	[HWBLK_RTC] = HWBLK(MSTPCR1, 8, SUB_AREA),
+
+	[HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA),
+	[HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA),
+	[HWBLK_SDHI] = HWBLK(MSTPCR2, 18, CORE_AREA),
+	[HWBLK_SIM] = HWBLK(MSTPCR2, 16, CORE_AREA),
+	[HWBLK_KEYSC] = HWBLK(MSTPCR2, 14, SUB_AREA),
+	[HWBLK_TSIF] = HWBLK(MSTPCR2, 13, SUB_AREA),
+	[HWBLK_USBF] = HWBLK(MSTPCR2, 11, CORE_AREA),
+	[HWBLK_2DG] = HWBLK(MSTPCR2, 9, CORE_AREA_BM),
+	[HWBLK_SIU] = HWBLK(MSTPCR2, 8, CORE_AREA),
+	[HWBLK_JPU] = HWBLK(MSTPCR2, 6, CORE_AREA_BM),
+	[HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM),
+	[HWBLK_BEU] = HWBLK(MSTPCR2, 4, CORE_AREA_BM),
+	[HWBLK_CEU] = HWBLK(MSTPCR2, 3, CORE_AREA_BM),
+	[HWBLK_VEU] = HWBLK(MSTPCR2, 2, CORE_AREA_BM),
+	[HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM),
+	[HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM),
+};
+
+static struct hwblk_info sh7722_hwblk_info = {
+	.areas = sh7722_hwblk_area,
+	.nr_areas = ARRAY_SIZE(sh7722_hwblk_area),
+	.hwblks = sh7722_hwblk,
+	.nr_hwblks = ARRAY_SIZE(sh7722_hwblk),
+};
+
+int arch_hwblk_sleep_mode(void)
+{
+	if (!sh7722_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_STANDBY | SUSP_SH_SF;
+
+	if (!sh7722_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_SLEEP | SUSP_SH_SF;
+
+	return SUSP_SH_SLEEP;
+}
+
+int __init arch_hwblk_init(void)
+{
+	return hwblk_register(&sh7722_hwblk_info);
+}
diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c
new file mode 100644
index 000000000000..a7f4684d2032
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c
@@ -0,0 +1,117 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c
+ *
+ * SH7723 hardware block support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7723.h>
+
+/* SH7723 registers */
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+
+/* SH7723 Power Domains */
+enum { CORE_AREA, SUB_AREA, CORE_AREA_BM };
+static struct hwblk_area sh7723_hwblk_area[] = {
+	[CORE_AREA] = HWBLK_AREA(0, 0),
+	[CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA),
+	[SUB_AREA] = HWBLK_AREA(0, 0),
+};
+
+/* Table mapping HWBLK to Module Stop Bit and Power Domain */
+static struct hwblk sh7723_hwblk[HWBLK_NR] = {
+	[HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA),
+	[HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA),
+	[HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA),
+	[HWBLK_L2C] = HWBLK(MSTPCR0, 28, CORE_AREA),
+	[HWBLK_ILMEM] = HWBLK(MSTPCR0, 27, CORE_AREA),
+	[HWBLK_FPU] = HWBLK(MSTPCR0, 24, CORE_AREA),
+	[HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA),
+	[HWBLK_DMAC0] = HWBLK(MSTPCR0, 21, CORE_AREA_BM),
+	[HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA),
+	[HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA),
+	[HWBLK_DBG] = HWBLK(MSTPCR0, 18, CORE_AREA),
+	[HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA),
+	[HWBLK_SUBC] = HWBLK(MSTPCR0, 16, CORE_AREA),
+	[HWBLK_TMU0] = HWBLK(MSTPCR0, 15, CORE_AREA),
+	[HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA),
+	[HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA),
+	[HWBLK_DMAC1] = HWBLK(MSTPCR0, 12, CORE_AREA_BM),
+	[HWBLK_TMU1] = HWBLK(MSTPCR0, 11, CORE_AREA),
+	[HWBLK_FLCTL] = HWBLK(MSTPCR0, 10, CORE_AREA),
+	[HWBLK_SCIF0] = HWBLK(MSTPCR0, 9, CORE_AREA),
+	[HWBLK_SCIF1] = HWBLK(MSTPCR0, 8, CORE_AREA),
+	[HWBLK_SCIF2] = HWBLK(MSTPCR0, 7, CORE_AREA),
+	[HWBLK_SCIF3] = HWBLK(MSTPCR0, 6, CORE_AREA),
+	[HWBLK_SCIF4] = HWBLK(MSTPCR0, 5, CORE_AREA),
+	[HWBLK_SCIF5] = HWBLK(MSTPCR0, 4, CORE_AREA),
+	[HWBLK_MSIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA),
+	[HWBLK_MSIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA),
+	[HWBLK_MERAM] = HWBLK(MSTPCR0, 0, CORE_AREA),
+
+	[HWBLK_IIC] = HWBLK(MSTPCR1, 9, CORE_AREA),
+	[HWBLK_RTC] = HWBLK(MSTPCR1, 8, SUB_AREA),
+
+	[HWBLK_ATAPI] = HWBLK(MSTPCR2, 28, CORE_AREA_BM),
+	[HWBLK_ADC] = HWBLK(MSTPCR2, 27, CORE_AREA),
+	[HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA),
+	[HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA),
+	[HWBLK_TSIF] = HWBLK(MSTPCR2, 22, CORE_AREA),
+	[HWBLK_ICB] = HWBLK(MSTPCR2, 21, CORE_AREA_BM),
+	[HWBLK_SDHI0] = HWBLK(MSTPCR2, 18, CORE_AREA),
+	[HWBLK_SDHI1] = HWBLK(MSTPCR2, 17, CORE_AREA),
+	[HWBLK_KEYSC] = HWBLK(MSTPCR2, 14, SUB_AREA),
+	[HWBLK_USB] = HWBLK(MSTPCR2, 11, CORE_AREA),
+	[HWBLK_2DG] = HWBLK(MSTPCR2, 10, CORE_AREA_BM),
+	[HWBLK_SIU] = HWBLK(MSTPCR2, 8, CORE_AREA),
+	[HWBLK_VEU2H1] = HWBLK(MSTPCR2, 6, CORE_AREA_BM),
+	[HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM),
+	[HWBLK_BEU] = HWBLK(MSTPCR2, 4, CORE_AREA_BM),
+	[HWBLK_CEU] = HWBLK(MSTPCR2, 3, CORE_AREA_BM),
+	[HWBLK_VEU2H0] = HWBLK(MSTPCR2, 2, CORE_AREA_BM),
+	[HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM),
+	[HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM),
+};
+
+static struct hwblk_info sh7723_hwblk_info = {
+	.areas = sh7723_hwblk_area,
+	.nr_areas = ARRAY_SIZE(sh7723_hwblk_area),
+	.hwblks = sh7723_hwblk,
+	.nr_hwblks = ARRAY_SIZE(sh7723_hwblk),
+};
+
+int arch_hwblk_sleep_mode(void)
+{
+	if (!sh7723_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_STANDBY | SUSP_SH_SF;
+
+	if (!sh7723_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_SLEEP | SUSP_SH_SF;
+
+	return SUSP_SH_SLEEP;
+}
+
+int __init arch_hwblk_init(void)
+{
+	return hwblk_register(&sh7723_hwblk_info);
+}
diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c
new file mode 100644
index 000000000000..1613ad6013c3
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c
@@ -0,0 +1,121 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c
+ *
+ * SH7724 hardware block support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7724.h>
+
+/* SH7724 registers */
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+
+/* SH7724 Power Domains */
+enum { CORE_AREA, SUB_AREA, CORE_AREA_BM };
+static struct hwblk_area sh7724_hwblk_area[] = {
+	[CORE_AREA] = HWBLK_AREA(0, 0),
+	[CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA),
+	[SUB_AREA] = HWBLK_AREA(0, 0),
+};
+
+/* Table mapping HWBLK to Module Stop Bit and Power Domain */
+static struct hwblk sh7724_hwblk[HWBLK_NR] = {
+	[HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA),
+	[HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA),
+	[HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA),
+	[HWBLK_RSMEM] = HWBLK(MSTPCR0, 28, CORE_AREA),
+	[HWBLK_ILMEM] = HWBLK(MSTPCR0, 27, CORE_AREA),
+	[HWBLK_L2C] = HWBLK(MSTPCR0, 26, CORE_AREA),
+	[HWBLK_FPU] = HWBLK(MSTPCR0, 24, CORE_AREA),
+	[HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA),
+	[HWBLK_DMAC0] = HWBLK(MSTPCR0, 21, CORE_AREA_BM),
+	[HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA),
+	[HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA),
+	[HWBLK_DBG] = HWBLK(MSTPCR0, 18, CORE_AREA),
+	[HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA),
+	[HWBLK_TMU0] = HWBLK(MSTPCR0, 15, CORE_AREA),
+	[HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA),
+	[HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA),
+	[HWBLK_DMAC1] = HWBLK(MSTPCR0, 12, CORE_AREA_BM),
+	[HWBLK_TMU1] = HWBLK(MSTPCR0, 10, CORE_AREA),
+	[HWBLK_SCIF0] = HWBLK(MSTPCR0, 9, CORE_AREA),
+	[HWBLK_SCIF1] = HWBLK(MSTPCR0, 8, CORE_AREA),
+	[HWBLK_SCIF2] = HWBLK(MSTPCR0, 7, CORE_AREA),
+	[HWBLK_SCIF3] = HWBLK(MSTPCR0, 6, CORE_AREA),
+	[HWBLK_SCIF4] = HWBLK(MSTPCR0, 5, CORE_AREA),
+	[HWBLK_SCIF5] = HWBLK(MSTPCR0, 4, CORE_AREA),
+	[HWBLK_MSIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA),
+	[HWBLK_MSIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA),
+
+	[HWBLK_KEYSC] = HWBLK(MSTPCR1, 12, SUB_AREA),
+	[HWBLK_RTC] = HWBLK(MSTPCR1, 11, SUB_AREA),
+	[HWBLK_IIC0] = HWBLK(MSTPCR1, 9, CORE_AREA),
+	[HWBLK_IIC1] = HWBLK(MSTPCR1, 8, CORE_AREA),
+
+	[HWBLK_MMC] = HWBLK(MSTPCR2, 29, CORE_AREA),
+	[HWBLK_ETHER] = HWBLK(MSTPCR2, 28, CORE_AREA_BM),
+	[HWBLK_ATAPI] = HWBLK(MSTPCR2, 26, CORE_AREA_BM),
+	[HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA),
+	[HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA),
+	[HWBLK_TSIF] = HWBLK(MSTPCR2, 22, CORE_AREA),
+	[HWBLK_USB1] = HWBLK(MSTPCR2, 21, CORE_AREA),
+	[HWBLK_USB0] = HWBLK(MSTPCR2, 20, CORE_AREA),
+	[HWBLK_2DG] = HWBLK(MSTPCR2, 19, CORE_AREA_BM),
+	[HWBLK_SDHI0] = HWBLK(MSTPCR2, 18, CORE_AREA),
+	[HWBLK_SDHI1] = HWBLK(MSTPCR2, 17, CORE_AREA),
+	[HWBLK_VEU1] = HWBLK(MSTPCR2, 15, CORE_AREA_BM),
+	[HWBLK_CEU1] = HWBLK(MSTPCR2, 13, CORE_AREA_BM),
+	[HWBLK_BEU1] = HWBLK(MSTPCR2, 12, CORE_AREA_BM),
+	[HWBLK_2DDMAC] = HWBLK(MSTPCR2, 10, CORE_AREA_BM),
+	[HWBLK_SPU] = HWBLK(MSTPCR2, 9, CORE_AREA_BM),
+	[HWBLK_JPU] = HWBLK(MSTPCR2, 6, CORE_AREA_BM),
+	[HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM),
+	[HWBLK_BEU0] = HWBLK(MSTPCR2, 4, CORE_AREA_BM),
+	[HWBLK_CEU0] = HWBLK(MSTPCR2, 3, CORE_AREA_BM),
+	[HWBLK_VEU0] = HWBLK(MSTPCR2, 2, CORE_AREA_BM),
+	[HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM),
+	[HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM),
+};
+
+static struct hwblk_info sh7724_hwblk_info = {
+	.areas = sh7724_hwblk_area,
+	.nr_areas = ARRAY_SIZE(sh7724_hwblk_area),
+	.hwblks = sh7724_hwblk,
+	.nr_hwblks = ARRAY_SIZE(sh7724_hwblk),
+};
+
+int arch_hwblk_sleep_mode(void)
+{
+	if (!sh7724_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_STANDBY | SUSP_SH_SF;
+
+	if (!sh7724_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_SLEEP | SUSP_SH_SF;
+
+	return SUSP_SH_SLEEP;
+}
+
+int __init arch_hwblk_init(void)
+{
+	return hwblk_register(&sh7724_hwblk_info);
+}
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
new file mode 100644
index 000000000000..ed23b155c097
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
@@ -0,0 +1,2019 @@
+/*
+ * SH7757 (A0 step) Pinmux
+ *
+ *  Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ *  Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * Based on SH7757 Pinmux
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7757.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+	PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+	PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+	PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+	PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+	PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
+	PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+	PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+	PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+	PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
+	PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+	PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+	PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
+	PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+	PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+	PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+	PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
+	PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA,
+	PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
+	PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
+	PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+	PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+	PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+	PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
+	PTM6_DATA, PTM5_DATA, PTM4_DATA,
+	PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+	PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+	PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
+	PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
+	PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA,
+	PTP6_DATA, PTP5_DATA, PTP4_DATA,
+	PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
+	PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+	PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
+	PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+	PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+	PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+	PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+	PTT5_DATA, PTT4_DATA,
+	PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+	PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+	PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+	PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+	PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+	PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+	PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
+	PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+	PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
+	PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+	PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
+	PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+	PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+	PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+	PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+	PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+	PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
+	PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
+	PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
+	PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
+	PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
+	PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
+	PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
+	PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
+	PTG7_IN, PTG6_IN, PTG5_IN, PTG4_IN,
+	PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
+	PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
+	PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
+	PTI7_IN, PTI6_IN, PTI5_IN, PTI4_IN,
+	PTI3_IN, PTI2_IN, PTI1_IN, PTI0_IN,
+	PTJ7_IN, PTJ6_IN, PTJ5_IN, PTJ4_IN,
+	PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
+	PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
+	PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
+	PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
+	PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
+	PTM6_IN, PTM5_IN, PTM4_IN,
+	PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+	PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
+	PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
+	PTO7_IN, PTO6_IN, PTO5_IN, PTO4_IN,
+	PTO3_IN, PTO2_IN, PTO1_IN, PTO0_IN,
+	PTP6_IN, PTP5_IN, PTP4_IN,
+	PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
+	PTQ6_IN, PTQ5_IN, PTQ4_IN,
+	PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
+	PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
+	PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
+	PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
+	PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
+	PTT5_IN, PTT4_IN,
+	PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
+	PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
+	PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+	PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
+	PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+	PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
+	PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
+	PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
+	PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
+	PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
+	PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
+	PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
+	PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PTU7_IN_PU, PTU6_IN_PU, PTU5_IN_PU, PTU4_IN_PU,
+	PTU3_IN_PU, PTU2_IN_PU, PTU1_IN_PU, PTU0_IN_PU,
+	PTV7_IN_PU, PTV6_IN_PU, PTV5_IN_PU, PTV4_IN_PU,
+	PTV3_IN_PU, PTV2_IN_PU, PTV1_IN_PU, PTV0_IN_PU,
+	PTW7_IN_PU, PTW6_IN_PU, PTW5_IN_PU, PTW4_IN_PU,
+	PTW3_IN_PU, PTW2_IN_PU, PTW1_IN_PU, PTW0_IN_PU,
+	PTX7_IN_PU, PTX6_IN_PU, PTX5_IN_PU, PTX4_IN_PU,
+	PTX3_IN_PU, PTX2_IN_PU, PTX1_IN_PU, PTX0_IN_PU,
+	PTY7_IN_PU, PTY6_IN_PU, PTY5_IN_PU, PTY4_IN_PU,
+	PTY3_IN_PU, PTY2_IN_PU, PTY1_IN_PU, PTY0_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
+	PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
+	PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+	PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+	PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
+	PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
+	PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
+	PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+	PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
+	PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
+	PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
+	PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
+	PTG7_OUT, PTG6_OUT, PTG5_OUT, PTG4_OUT,
+	PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+	PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
+	PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+	PTI7_OUT, PTI6_OUT, PTI5_OUT, PTI4_OUT,
+	PTI3_OUT, PTI2_OUT, PTI1_OUT, PTI0_OUT,
+	PTJ7_OUT, PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
+	PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
+	PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
+	PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
+	PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
+	PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
+	PTM6_OUT, PTM5_OUT, PTM4_OUT,
+	PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+	PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
+	PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
+	PTO7_OUT, PTO6_OUT, PTO5_OUT, PTO4_OUT,
+	PTO3_OUT, PTO2_OUT, PTO1_OUT, PTO0_OUT,
+	PTP6_OUT, PTP5_OUT, PTP4_OUT,
+	PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
+	PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
+	PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
+	PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
+	PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
+	PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
+	PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
+	PTT5_OUT, PTT4_OUT,
+	PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
+	PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
+	PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
+	PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
+	PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+	PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
+	PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
+	PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
+	PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
+	PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
+	PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
+	PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
+	PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
+	PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
+	PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
+	PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
+	PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
+	PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
+	PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
+	PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
+	PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
+	PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
+	PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
+	PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
+	PTG7_FN, PTG6_FN, PTG5_FN, PTG4_FN,
+	PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
+	PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
+	PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
+	PTI7_FN, PTI6_FN, PTI5_FN, PTI4_FN,
+	PTI3_FN, PTI2_FN, PTI1_FN, PTI0_FN,
+	PTJ7_FN, PTJ6_FN, PTJ5_FN, PTJ4_FN,
+	PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
+	PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
+	PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
+	PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
+	PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
+	PTM6_FN, PTM5_FN, PTM4_FN,
+	PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
+	PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
+	PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
+	PTO7_FN, PTO6_FN, PTO5_FN, PTO4_FN,
+	PTO3_FN, PTO2_FN, PTO1_FN, PTO0_FN,
+	PTP6_FN, PTP5_FN, PTP4_FN,
+	PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
+	PTQ6_FN, PTQ5_FN, PTQ4_FN,
+	PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
+	PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
+	PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
+	PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
+	PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
+	PTT5_FN, PTT4_FN,
+	PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
+	PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
+	PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
+	PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
+	PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
+	PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
+	PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
+	PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
+	PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
+	PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
+	PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
+	PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
+	PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
+
+	PS0_15_FN1, PS0_15_FN3,
+	PS0_14_FN1, PS0_14_FN3,
+	PS0_13_FN1, PS0_13_FN3,
+	PS0_12_FN1, PS0_12_FN3,
+	PS0_7_FN1, PS0_7_FN2,
+	PS0_6_FN1, PS0_6_FN2,
+	PS0_5_FN1, PS0_5_FN2,
+	PS0_4_FN1, PS0_4_FN2,
+	PS0_3_FN1, PS0_3_FN2,
+	PS0_2_FN1, PS0_2_FN2,
+	PS0_1_FN1, PS0_1_FN2,
+
+	PS1_7_FN1, PS1_7_FN3,
+	PS1_6_FN1, PS1_6_FN3,
+
+	PS2_13_FN1, PS2_13_FN3,
+	PS2_12_FN1, PS2_12_FN3,
+	PS2_1_FN1, PS2_1_FN2,
+	PS2_0_FN1, PS2_0_FN2,
+
+	PS4_15_FN1, PS4_15_FN2,
+	PS4_14_FN1, PS4_14_FN2,
+	PS4_13_FN1, PS4_13_FN2,
+	PS4_12_FN1, PS4_12_FN2,
+	PS4_11_FN1, PS4_11_FN2,
+	PS4_10_FN1, PS4_10_FN2,
+	PS4_9_FN1, PS4_9_FN2,
+	PS4_3_FN1, PS4_3_FN2,
+	PS4_2_FN1, PS4_2_FN2,
+	PS4_1_FN1, PS4_1_FN2,
+	PS4_0_FN1, PS4_0_FN2,
+
+	PS5_9_FN1, PS5_9_FN2,
+	PS5_8_FN1, PS5_8_FN2,
+	PS5_7_FN1, PS5_7_FN2,
+	PS5_6_FN1, PS5_6_FN2,
+	PS5_5_FN1, PS5_5_FN2,
+	PS5_4_FN1, PS5_4_FN2,
+
+	/* AN15 to 8 : EVENT15 to 8 */
+	PS6_7_FN_AN, PS6_7_FN_EV,
+	PS6_6_FN_AN, PS6_6_FN_EV,
+	PS6_5_FN_AN, PS6_5_FN_EV,
+	PS6_4_FN_AN, PS6_4_FN_EV,
+	PS6_3_FN_AN, PS6_3_FN_EV,
+	PS6_2_FN_AN, PS6_2_FN_EV,
+	PS6_1_FN_AN, PS6_1_FN_EV,
+	PS6_0_FN_AN, PS6_0_FN_EV,
+
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* PTA (mobule: LBSC, CPG, LPC) */
+	BS_MARK,	RDWR_MARK,	WE1_MARK,	RDY_MARK,
+	MD10_MARK,	MD9_MARK,	MD8_MARK,
+	LGPIO7_MARK,	LGPIO6_MARK,	LGPIO5_MARK,	LGPIO4_MARK,
+	LGPIO3_MARK,	LGPIO2_MARK,	LGPIO1_MARK,	LGPIO0_MARK,
+
+	/* PTB (mobule: LBSC, EtherC, SIM, LPC) */
+	D15_MARK,	D14_MARK,	D13_MARK,	D12_MARK,
+	D11_MARK,	D10_MARK,	D9_MARK,	D8_MARK,
+	ET0_MDC_MARK,	ET0_MDIO_MARK,	ET1_MDC_MARK,	ET1_MDIO_MARK,
+	SIM_D_MARK,	SIM_CLK_MARK,	SIM_RST_MARK,
+	WPSZ1_MARK,	WPSZ0_MARK,	FWID_MARK,	FLSHSZ_MARK,
+	LPC_SPIEN_MARK,	BASEL_MARK,
+
+	/* PTC (mobule: SD) */
+	SD_WP_MARK,	SD_CD_MARK,	SD_CLK_MARK,	SD_CMD_MARK,
+	SD_D3_MARK,	SD_D2_MARK,	SD_D1_MARK,	SD_D0_MARK,
+
+	/* PTD (mobule: INTC, SPI0, LBSC, CPG, ADC) */
+	IRQ7_MARK,	IRQ6_MARK,	IRQ5_MARK,	IRQ4_MARK,
+	IRQ3_MARK,	IRQ2_MARK,	IRQ1_MARK,	IRQ0_MARK,
+	MD6_MARK,	MD5_MARK,	MD3_MARK,	MD2_MARK,
+	MD1_MARK,	MD0_MARK,	ADTRG1_MARK,	ADTRG0_MARK,
+
+	/* PTE (mobule: EtherC) */
+	ET0_CRS_DV_MARK,	ET0_TXD1_MARK,
+	ET0_TXD0_MARK,		ET0_TX_EN_MARK,
+	ET0_REF_CLK_MARK,	ET0_RXD1_MARK,
+	ET0_RXD0_MARK,		ET0_RX_ER_MARK,
+
+	/* PTF (mobule: EtherC) */
+	ET1_CRS_DV_MARK,	ET1_TXD1_MARK,
+	ET1_TXD0_MARK,		ET1_TX_EN_MARK,
+	ET1_REF_CLK_MARK,	ET1_RXD1_MARK,
+	ET1_RXD0_MARK,		ET1_RX_ER_MARK,
+
+	/* PTG (mobule: SYSTEM, PWMX, LPC) */
+	STATUS0_MARK,	STATUS1_MARK,
+	PWX0_MARK,	PWX1_MARK,	PWX2_MARK,	PWX3_MARK,
+	SERIRQ_MARK,	CLKRUN_MARK,	LPCPD_MARK,	LDRQ_MARK,
+
+	/* PTH (mobule: TMU, SCIF234, SPI1, SPI0) */
+	TCLK_MARK,	RXD4_MARK,	TXD4_MARK,
+	SP1_MOSI_MARK,	SP1_MISO_MARK,	SP1_SCK_MARK,	SP1_SCK_FB_MARK,
+	SP1_SS0_MARK,	SP1_SS1_MARK,	SP0_SS1_MARK,
+
+	/* PTI (mobule: INTC) */
+	IRQ15_MARK,	IRQ14_MARK,	IRQ13_MARK,	IRQ12_MARK,
+	IRQ11_MARK,	IRQ10_MARK,	IRQ9_MARK,	IRQ8_MARK,
+
+	/* PTJ (mobule: SCIF234, SERMUX) */
+	RXD3_MARK,	TXD3_MARK,	RXD2_MARK,	TXD2_MARK,
+	COM1_TXD_MARK,	COM1_RXD_MARK,	COM1_RTS_MARK,	COM1_CTS_MARK,
+
+	/* PTK (mobule: SERMUX) */
+	COM2_TXD_MARK,	COM2_RXD_MARK,	COM2_RTS_MARK,	COM2_CTS_MARK,
+	COM2_DTR_MARK,	COM2_DSR_MARK,	COM2_DCD_MARK,	COM2_RI_MARK,
+
+	/* PTL (mobule: SERMUX) */
+	RAC_TXD_MARK,	RAC_RXD_MARK,	RAC_RTS_MARK,	RAC_CTS_MARK,
+	RAC_DTR_MARK,	RAC_DSR_MARK,	RAC_DCD_MARK,	RAC_RI_MARK,
+
+	/* PTM (mobule: IIC, LPC) */
+	SDA6_MARK,	SCL6_MARK,	SDA7_MARK,	SCL7_MARK,
+	WP_MARK,	FMS0_MARK,	FMS1_MARK,
+
+	/* PTN (mobule: SCIF234, EVC) */
+	SCK2_MARK,	RTS4_MARK,	RTS3_MARK,	RTS2_MARK,
+	CTS4_MARK,	CTS3_MARK,	CTS2_MARK,
+	EVENT7_MARK,	EVENT6_MARK,	EVENT5_MARK,	EVENT4_MARK,
+	EVENT3_MARK,	EVENT2_MARK,	EVENT1_MARK,	EVENT0_MARK,
+
+	/* PTO (mobule: SGPIO) */
+	SGPIO0_CLK_MARK,	SGPIO0_LOAD_MARK,
+	SGPIO0_DI_MARK,		SGPIO0_DO_MARK,
+	SGPIO1_CLK_MARK,	SGPIO1_LOAD_MARK,
+	SGPIO1_DI_MARK,		SGPIO1_DO_MARK,
+
+	/* PTP (mobule: JMC, SCIF234) */
+	JMCTCK_MARK,	JMCTMS_MARK,	JMCTDO_MARK,	JMCTDI_MARK,
+	JMCRST_MARK,	SCK4_MARK,	SCK3_MARK,
+
+	/* PTQ (mobule: LPC) */
+	LAD3_MARK,	LAD2_MARK,	LAD1_MARK,	LAD0_MARK,
+	LFRAME_MARK,	LRESET_MARK,	LCLK_MARK,
+
+	/* PTR (mobule: GRA, IIC) */
+	DDC3_MARK,	DDC2_MARK,
+	SDA8_MARK,	SCL8_MARK,	SDA2_MARK,	SCL2_MARK,
+	SDA1_MARK,	SCL1_MARK,	SDA0_MARK,	SCL0_MARK,
+
+	/* PTS (mobule: GRA, IIC) */
+	DDC1_MARK,	DDC0_MARK,
+	SDA9_MARK,	SCL9_MARK,	SDA5_MARK,	SCL5_MARK,
+	SDA4_MARK,	SCL4_MARK,	SDA3_MARK,	SCL3_MARK,
+
+	/* PTT (mobule: SYSTEM, PWMX) */
+	AUDSYNC_MARK,		AUDCK_MARK,
+	AUDATA3_MARK,		AUDATA2_MARK,
+	AUDATA1_MARK,		AUDATA0_MARK,
+	PWX7_MARK,	PWX6_MARK,	PWX5_MARK,	PWX4_MARK,
+
+	/* PTU (mobule: LBSC, DMAC) */
+	CS6_MARK,	CS5_MARK,	CS4_MARK,	CS0_MARK,
+	RD_MARK,	WE0_MARK,	A25_MARK,	A24_MARK,
+	DREQ0_MARK,	DACK0_MARK,
+
+	/* PTV (mobule: LBSC, DMAC) */
+	A23_MARK,	A22_MARK,	A21_MARK,	A20_MARK,
+	A19_MARK,	A18_MARK,	A17_MARK,	A16_MARK,
+	TEND0_MARK,	DREQ1_MARK,	DACK1_MARK,	TEND1_MARK,
+
+	/* PTW (mobule: LBSC) */
+	A15_MARK,	A14_MARK,	A13_MARK,	A12_MARK,
+	A11_MARK,	A10_MARK,	A9_MARK,	A8_MARK,
+
+	/* PTX (mobule: LBSC) */
+	A7_MARK,	A6_MARK,	A5_MARK,	A4_MARK,
+	A3_MARK,	A2_MARK,	A1_MARK,	A0_MARK,
+
+	/* PTY (mobule: LBSC) */
+	D7_MARK,	D6_MARK,	D5_MARK,	D4_MARK,
+	D3_MARK,	D2_MARK,	D1_MARK,	D0_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	/* PTA GPIO */
+	PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
+	PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
+	PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
+	PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
+	PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
+	PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
+	PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
+	PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
+
+	/* PTB GPIO */
+	PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
+	PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
+	PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
+	PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
+	PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
+	PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
+	PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
+	PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
+
+	/* PTC GPIO */
+	PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
+	PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
+	PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
+	PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
+	PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
+	PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
+	PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
+	PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
+
+	/* PTD GPIO */
+	PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
+	PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
+	PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
+	PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
+	PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
+	PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
+	PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
+	PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
+
+	/* PTE GPIO */
+	PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
+	PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
+	PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
+	PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
+	PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
+	PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
+
+	/* PTF GPIO */
+	PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
+	PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
+	PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
+	PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
+	PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
+	PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
+	PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
+	PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
+
+	/* PTG GPIO */
+	PINMUX_DATA(PTG7_DATA, PTG7_IN, PTG7_OUT),
+	PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
+	PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
+	PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
+	PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
+	PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
+	PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
+	PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
+
+	/* PTH GPIO */
+	PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
+	PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
+	PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
+	PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
+	PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
+	PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
+	PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
+	PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
+
+	/* PTI GPIO */
+	PINMUX_DATA(PTI7_DATA, PTI7_IN, PTI7_OUT),
+	PINMUX_DATA(PTI6_DATA, PTI6_IN, PTI6_OUT),
+	PINMUX_DATA(PTI5_DATA, PTI5_IN, PTI5_OUT),
+	PINMUX_DATA(PTI4_DATA, PTI4_IN, PTI4_OUT),
+	PINMUX_DATA(PTI3_DATA, PTI3_IN, PTI3_OUT),
+	PINMUX_DATA(PTI2_DATA, PTI2_IN, PTI2_OUT),
+	PINMUX_DATA(PTI1_DATA, PTI1_IN, PTI1_OUT),
+	PINMUX_DATA(PTI0_DATA, PTI0_IN, PTI0_OUT),
+
+	/* PTJ GPIO */
+	PINMUX_DATA(PTJ7_DATA, PTJ7_IN, PTJ7_OUT),
+	PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
+	PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
+	PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
+	PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
+	PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
+	PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
+	PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
+
+	/* PTK GPIO */
+	PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
+	PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
+	PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
+	PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
+	PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
+	PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
+	PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
+	PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
+
+	/* PTL GPIO */
+	PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
+	PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
+	PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
+	PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
+	PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
+	PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
+	PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
+	PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
+
+	/* PTM GPIO */
+	PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
+	PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
+	PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
+	PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
+	PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
+	PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
+	PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
+
+	/* PTN GPIO */
+	PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
+	PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
+	PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
+	PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
+	PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
+	PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
+	PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
+	PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
+
+	/* PTO GPIO */
+	PINMUX_DATA(PTO7_DATA, PTO7_IN, PTO7_OUT),
+	PINMUX_DATA(PTO6_DATA, PTO6_IN, PTO6_OUT),
+	PINMUX_DATA(PTO5_DATA, PTO5_IN, PTO5_OUT),
+	PINMUX_DATA(PTO4_DATA, PTO4_IN, PTO4_OUT),
+	PINMUX_DATA(PTO3_DATA, PTO3_IN, PTO3_OUT),
+	PINMUX_DATA(PTO2_DATA, PTO2_IN, PTO2_OUT),
+	PINMUX_DATA(PTO1_DATA, PTO1_IN, PTO1_OUT),
+	PINMUX_DATA(PTO0_DATA, PTO0_IN, PTO0_OUT),
+
+	/* PTQ GPIO */
+	PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
+	PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
+	PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
+	PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
+	PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
+	PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
+	PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
+
+	/* PTR GPIO */
+	PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
+	PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
+	PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
+	PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
+	PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
+	PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
+	PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
+	PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
+
+	/* PTS GPIO */
+	PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
+	PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
+	PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
+	PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
+	PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
+	PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
+	PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
+	PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
+
+	/* PTT GPIO */
+	PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
+	PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
+	PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
+	PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
+	PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
+	PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
+
+	/* PTU GPIO */
+	PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
+	PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
+	PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
+	PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
+	PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
+	PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
+	PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
+	PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
+
+	/* PTV GPIO */
+	PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
+	PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
+	PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
+	PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
+	PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
+	PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
+	PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
+	PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
+
+	/* PTW GPIO */
+	PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
+	PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
+	PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
+	PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
+	PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
+	PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
+	PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
+	PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
+
+	/* PTX GPIO */
+	PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
+	PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
+	PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
+	PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
+	PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
+	PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
+	PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
+	PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
+
+	/* PTY GPIO */
+	PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
+	PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
+	PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
+	PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
+	PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
+	PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
+	PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
+	PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
+
+	/* PTZ GPIO */
+	PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
+	PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
+	PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
+	PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
+	PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
+	PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
+	PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
+	PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
+
+	/* PTA FN */
+	PINMUX_DATA(BS_MARK, PS0_15_FN1, PTA7_FN),
+	PINMUX_DATA(LGPIO7_MARK, PS0_15_FN3, PTA7_FN),
+	PINMUX_DATA(RDWR_MARK, PS0_14_FN1, PTA6_FN),
+	PINMUX_DATA(LGPIO6_MARK, PS0_14_FN3, PTA6_FN),
+	PINMUX_DATA(WE1_MARK, PS0_13_FN1, PTA5_FN),
+	PINMUX_DATA(LGPIO5_MARK, PS0_13_FN3, PTA5_FN),
+	PINMUX_DATA(RDY_MARK, PS0_12_FN1, PTA4_FN),
+	PINMUX_DATA(LGPIO4_MARK, PS0_12_FN3, PTA4_FN),
+	PINMUX_DATA(LGPIO3_MARK, PTA3_FN),
+	PINMUX_DATA(LGPIO2_MARK, PTA2_FN),
+	PINMUX_DATA(LGPIO1_MARK, PTA1_FN),
+	PINMUX_DATA(LGPIO0_MARK, PTA0_FN),
+
+	/* PTB FN */
+	PINMUX_DATA(D15_MARK, PS0_7_FN1, PTB7_FN),
+	PINMUX_DATA(ET0_MDC_MARK, PS0_7_FN2, PTB7_FN),
+	PINMUX_DATA(D14_MARK, PS0_6_FN1, PTB6_FN),
+	PINMUX_DATA(ET0_MDIO_MARK, PS0_6_FN2, PTB6_FN),
+	PINMUX_DATA(D13_MARK, PS0_5_FN1, PTB5_FN),
+	PINMUX_DATA(ET1_MDC_MARK, PS0_5_FN2, PTB5_FN),
+	PINMUX_DATA(D12_MARK, PS0_4_FN1, PTB4_FN),
+	PINMUX_DATA(ET1_MDIO_MARK, PS0_4_FN2, PTB4_FN),
+	PINMUX_DATA(D11_MARK, PS0_3_FN1, PTB3_FN),
+	PINMUX_DATA(SIM_D_MARK, PS0_3_FN2, PTB3_FN),
+	PINMUX_DATA(D10_MARK, PS0_2_FN1, PTB2_FN),
+	PINMUX_DATA(SIM_CLK_MARK, PS0_2_FN2, PTB2_FN),
+	PINMUX_DATA(D9_MARK, PS0_1_FN1, PTB1_FN),
+	PINMUX_DATA(SIM_RST_MARK, PS0_1_FN2, PTB1_FN),
+	PINMUX_DATA(D8_MARK, PTB0_FN),
+
+	/* PTC FN */
+	PINMUX_DATA(SD_WP_MARK, PTC7_FN),
+	PINMUX_DATA(SD_CD_MARK, PTC6_FN),
+	PINMUX_DATA(SD_CLK_MARK, PTC5_FN),
+	PINMUX_DATA(SD_CMD_MARK, PTC4_FN),
+	PINMUX_DATA(SD_D3_MARK, PTC3_FN),
+	PINMUX_DATA(SD_D2_MARK, PTC2_FN),
+	PINMUX_DATA(SD_D1_MARK, PTC1_FN),
+	PINMUX_DATA(SD_D0_MARK, PTC0_FN),
+
+	/* PTD FN */
+	PINMUX_DATA(IRQ7_MARK, PS1_7_FN1, PTD7_FN),
+	PINMUX_DATA(ADTRG1_MARK, PS1_7_FN3, PTD7_FN),
+	PINMUX_DATA(IRQ6_MARK, PS1_6_FN1, PTD6_FN),
+	PINMUX_DATA(ADTRG0_MARK, PS1_6_FN3, PTD6_FN),
+	PINMUX_DATA(IRQ5_MARK, PTD5_FN),
+	PINMUX_DATA(IRQ4_MARK, PTD4_FN),
+	PINMUX_DATA(IRQ3_MARK, PTD3_FN),
+	PINMUX_DATA(IRQ2_MARK, PTD2_FN),
+	PINMUX_DATA(IRQ1_MARK, PTD1_FN),
+	PINMUX_DATA(IRQ0_MARK, PTD0_FN),
+
+	/* PTE FN */
+	PINMUX_DATA(ET0_CRS_DV_MARK, PTE7_FN),
+	PINMUX_DATA(ET0_TXD1_MARK, PTE6_FN),
+	PINMUX_DATA(ET0_TXD0_MARK, PTE5_FN),
+	PINMUX_DATA(ET0_TX_EN_MARK, PTE4_FN),
+	PINMUX_DATA(ET0_REF_CLK_MARK, PTE3_FN),
+	PINMUX_DATA(ET0_RXD1_MARK, PTE2_FN),
+	PINMUX_DATA(ET0_RXD0_MARK, PTE1_FN),
+	PINMUX_DATA(ET0_RX_ER_MARK, PTE0_FN),
+
+	/* PTF FN */
+	PINMUX_DATA(ET1_CRS_DV_MARK, PTF7_FN),
+	PINMUX_DATA(ET1_TXD1_MARK, PTF6_FN),
+	PINMUX_DATA(ET1_TXD0_MARK, PTF5_FN),
+	PINMUX_DATA(ET1_TX_EN_MARK, PTF4_FN),
+	PINMUX_DATA(ET1_REF_CLK_MARK, PTF3_FN),
+	PINMUX_DATA(ET1_RXD1_MARK, PTF2_FN),
+	PINMUX_DATA(ET1_RXD0_MARK, PTF1_FN),
+	PINMUX_DATA(ET1_RX_ER_MARK, PTF0_FN),
+
+	/* PTG FN */
+	PINMUX_DATA(PWX0_MARK, PTG7_FN),
+	PINMUX_DATA(PWX1_MARK, PTG6_FN),
+	PINMUX_DATA(STATUS0_MARK, PS2_13_FN1, PTG5_FN),
+	PINMUX_DATA(PWX2_MARK, PS2_13_FN3, PTG5_FN),
+	PINMUX_DATA(STATUS1_MARK, PS2_12_FN1, PTG4_FN),
+	PINMUX_DATA(PWX3_MARK, PS2_12_FN3, PTG4_FN),
+	PINMUX_DATA(SERIRQ_MARK, PTG3_FN),
+	PINMUX_DATA(CLKRUN_MARK, PTG2_FN),
+	PINMUX_DATA(LPCPD_MARK, PTG1_FN),
+	PINMUX_DATA(LDRQ_MARK, PTG0_FN),
+
+	/* PTH FN */
+	PINMUX_DATA(SP1_MOSI_MARK, PTH7_FN),
+	PINMUX_DATA(SP1_MISO_MARK, PTH6_FN),
+	PINMUX_DATA(SP1_SCK_MARK, PTH5_FN),
+	PINMUX_DATA(SP1_SCK_FB_MARK, PTH4_FN),
+	PINMUX_DATA(SP1_SS0_MARK, PTH3_FN),
+	PINMUX_DATA(TCLK_MARK, PTH2_FN),
+	PINMUX_DATA(RXD4_MARK, PS2_1_FN1, PTH1_FN),
+	PINMUX_DATA(SP1_SS1_MARK, PS2_1_FN2, PTH1_FN),
+	PINMUX_DATA(TXD4_MARK, PS2_0_FN1, PTH0_FN),
+	PINMUX_DATA(SP0_SS1_MARK, PS2_0_FN2, PTH0_FN),
+
+	/* PTI FN */
+	PINMUX_DATA(IRQ15_MARK, PTI7_FN),
+	PINMUX_DATA(IRQ14_MARK, PTI6_FN),
+	PINMUX_DATA(IRQ13_MARK, PTI5_FN),
+	PINMUX_DATA(IRQ12_MARK, PTI4_FN),
+	PINMUX_DATA(IRQ11_MARK, PTI3_FN),
+	PINMUX_DATA(IRQ10_MARK, PTI2_FN),
+	PINMUX_DATA(IRQ9_MARK, PTI1_FN),
+	PINMUX_DATA(IRQ8_MARK, PTI0_FN),
+
+	/* PTJ FN */
+	PINMUX_DATA(RXD3_MARK, PTJ7_FN),
+	PINMUX_DATA(TXD3_MARK, PTJ6_FN),
+	PINMUX_DATA(RXD2_MARK, PTJ5_FN),
+	PINMUX_DATA(TXD2_MARK, PTJ4_FN),
+	PINMUX_DATA(COM1_TXD_MARK, PTJ3_FN),
+	PINMUX_DATA(COM1_RXD_MARK, PTJ2_FN),
+	PINMUX_DATA(COM1_RTS_MARK, PTJ1_FN),
+	PINMUX_DATA(COM1_CTS_MARK, PTJ0_FN),
+
+	/* PTK FN */
+	PINMUX_DATA(COM2_TXD_MARK, PTK7_FN),
+	PINMUX_DATA(COM2_RXD_MARK, PTK6_FN),
+	PINMUX_DATA(COM2_RTS_MARK, PTK5_FN),
+	PINMUX_DATA(COM2_CTS_MARK, PTK4_FN),
+	PINMUX_DATA(COM2_DTR_MARK, PTK3_FN),
+	PINMUX_DATA(COM2_DSR_MARK, PTK2_FN),
+	PINMUX_DATA(COM2_DCD_MARK, PTK1_FN),
+	PINMUX_DATA(COM2_RI_MARK, PTK0_FN),
+
+	/* PTL FN */
+	PINMUX_DATA(RAC_TXD_MARK, PTL7_FN),
+	PINMUX_DATA(RAC_RXD_MARK, PTL6_FN),
+	PINMUX_DATA(RAC_RTS_MARK, PTL5_FN),
+	PINMUX_DATA(RAC_CTS_MARK, PTL4_FN),
+	PINMUX_DATA(RAC_DTR_MARK, PTL3_FN),
+	PINMUX_DATA(RAC_DSR_MARK, PTL2_FN),
+	PINMUX_DATA(RAC_DCD_MARK, PTL1_FN),
+	PINMUX_DATA(RAC_RI_MARK, PTL0_FN),
+
+	/* PTM FN */
+	PINMUX_DATA(WP_MARK, PTM6_FN),
+	PINMUX_DATA(FMS0_MARK, PTM5_FN),
+	PINMUX_DATA(FMS1_MARK, PTM4_FN),
+	PINMUX_DATA(SDA6_MARK, PTM3_FN),
+	PINMUX_DATA(SCL6_MARK, PTM2_FN),
+	PINMUX_DATA(SDA7_MARK, PTM1_FN),
+	PINMUX_DATA(SCL7_MARK, PTM0_FN),
+
+	/* PTN FN */
+	PINMUX_DATA(SCK2_MARK, PS4_15_FN1, PTN7_FN),
+	PINMUX_DATA(EVENT7_MARK, PS4_15_FN2, PTN7_FN),
+	PINMUX_DATA(RTS4_MARK, PS4_14_FN1, PTN6_FN),
+	PINMUX_DATA(EVENT6_MARK, PS4_14_FN2, PTN6_FN),
+	PINMUX_DATA(RTS3_MARK, PS4_13_FN1, PTN5_FN),
+	PINMUX_DATA(EVENT5_MARK, PS4_13_FN2, PTN5_FN),
+	PINMUX_DATA(RTS2_MARK, PS4_12_FN1, PTN4_FN),
+	PINMUX_DATA(EVENT4_MARK, PS4_12_FN2, PTN4_FN),
+	PINMUX_DATA(CTS4_MARK, PS4_11_FN1, PTN3_FN),
+	PINMUX_DATA(EVENT3_MARK, PS4_11_FN2, PTN3_FN),
+	PINMUX_DATA(CTS3_MARK, PS4_10_FN1, PTN2_FN),
+	PINMUX_DATA(EVENT2_MARK, PS4_10_FN2, PTN2_FN),
+	PINMUX_DATA(CTS2_MARK, PS4_9_FN1, PTN1_FN),
+	PINMUX_DATA(EVENT1_MARK, PS4_9_FN2, PTN1_FN),
+	PINMUX_DATA(EVENT0_MARK, PTN0_FN),
+
+	/* PTO FN */
+	PINMUX_DATA(SGPIO0_CLK_MARK, PTO7_FN),
+	PINMUX_DATA(SGPIO0_LOAD_MARK, PTO6_FN),
+	PINMUX_DATA(SGPIO0_DI_MARK, PTO5_FN),
+	PINMUX_DATA(SGPIO0_DO_MARK, PTO4_FN),
+	PINMUX_DATA(SGPIO1_CLK_MARK, PTO3_FN),
+	PINMUX_DATA(SGPIO1_LOAD_MARK, PTO2_FN),
+	PINMUX_DATA(SGPIO1_DI_MARK, PTO1_FN),
+	PINMUX_DATA(SGPIO1_DO_MARK, PTO0_FN),
+
+	/* PTP FN */
+	PINMUX_DATA(JMCTCK_MARK, PTP6_FN),
+	PINMUX_DATA(JMCTMS_MARK, PTP5_FN),
+	PINMUX_DATA(JMCTDO_MARK, PTP4_FN),
+	PINMUX_DATA(JMCTDI_MARK, PTP3_FN),
+	PINMUX_DATA(JMCRST_MARK, PTP2_FN),
+	PINMUX_DATA(SCK4_MARK, PTP1_FN),
+	PINMUX_DATA(SCK3_MARK, PTP0_FN),
+
+	/* PTQ FN */
+	PINMUX_DATA(LAD3_MARK, PTQ6_FN),
+	PINMUX_DATA(LAD2_MARK, PTQ5_FN),
+	PINMUX_DATA(LAD1_MARK, PTQ4_FN),
+	PINMUX_DATA(LAD0_MARK, PTQ3_FN),
+	PINMUX_DATA(LFRAME_MARK, PTQ2_FN),
+	PINMUX_DATA(SCK4_MARK, PTQ1_FN),
+	PINMUX_DATA(SCK3_MARK, PTQ0_FN),
+
+	/* PTR FN */
+	PINMUX_DATA(SDA8_MARK, PTR7_FN),	/* DDC3? */
+	PINMUX_DATA(SCL8_MARK, PTR6_FN),	/* DDC2? */
+	PINMUX_DATA(SDA2_MARK, PTR5_FN),
+	PINMUX_DATA(SCL2_MARK, PTR4_FN),
+	PINMUX_DATA(SDA1_MARK, PTR3_FN),
+	PINMUX_DATA(SCL1_MARK, PTR2_FN),
+	PINMUX_DATA(SDA0_MARK, PTR1_FN),
+	PINMUX_DATA(SCL0_MARK, PTR0_FN),
+
+	/* PTS FN */
+	PINMUX_DATA(SDA9_MARK, PTS7_FN),	/* DDC1? */
+	PINMUX_DATA(SCL9_MARK, PTS6_FN),	/* DDC0? */
+	PINMUX_DATA(SDA5_MARK, PTS5_FN),
+	PINMUX_DATA(SCL5_MARK, PTS4_FN),
+	PINMUX_DATA(SDA4_MARK, PTS3_FN),
+	PINMUX_DATA(SCL4_MARK, PTS2_FN),
+	PINMUX_DATA(SDA3_MARK, PTS1_FN),
+	PINMUX_DATA(SCL3_MARK, PTS0_FN),
+
+	/* PTT FN */
+	PINMUX_DATA(AUDSYNC_MARK, PTS5_FN),
+	PINMUX_DATA(AUDCK_MARK, PTS4_FN),
+	PINMUX_DATA(AUDATA3_MARK, PS4_3_FN1, PTS3_FN),
+	PINMUX_DATA(PWX7_MARK, PS4_3_FN2, PTS3_FN),
+	PINMUX_DATA(AUDATA2_MARK, PS4_2_FN1, PTS2_FN),
+	PINMUX_DATA(PWX6_MARK, PS4_2_FN2, PTS2_FN),
+	PINMUX_DATA(AUDATA1_MARK, PS4_1_FN1, PTS1_FN),
+	PINMUX_DATA(PWX5_MARK, PS4_1_FN2, PTS1_FN),
+	PINMUX_DATA(AUDATA0_MARK, PS4_0_FN1, PTS0_FN),
+	PINMUX_DATA(PWX4_MARK, PS4_0_FN2, PTS0_FN),
+
+	/* PTU FN */
+	PINMUX_DATA(CS6_MARK, PTU7_FN),
+	PINMUX_DATA(CS5_MARK, PTU6_FN),
+	PINMUX_DATA(CS4_MARK, PTU5_FN),
+	PINMUX_DATA(CS0_MARK, PTU4_FN),
+	PINMUX_DATA(RD_MARK, PTU3_FN),
+	PINMUX_DATA(WE0_MARK, PTU2_FN),
+	PINMUX_DATA(A25_MARK, PS5_9_FN1, PTU1_FN),
+	PINMUX_DATA(DREQ0_MARK, PS5_9_FN2, PTU1_FN),
+	PINMUX_DATA(A24_MARK, PS5_8_FN1, PTU0_FN),
+	PINMUX_DATA(DACK0_MARK, PS5_8_FN2, PTU0_FN),
+
+	/* PTV FN */
+	PINMUX_DATA(A23_MARK, PS5_7_FN1, PTV7_FN),
+	PINMUX_DATA(TEND0_MARK, PS5_7_FN2, PTV7_FN),
+	PINMUX_DATA(A22_MARK, PS5_6_FN1, PTV6_FN),
+	PINMUX_DATA(DREQ1_MARK, PS5_6_FN2, PTV6_FN),
+	PINMUX_DATA(A21_MARK, PS5_5_FN1, PTV5_FN),
+	PINMUX_DATA(DACK1_MARK, PS5_5_FN2, PTV5_FN),
+	PINMUX_DATA(A20_MARK, PS5_4_FN1, PTV4_FN),
+	PINMUX_DATA(TEND1_MARK, PS5_4_FN2, PTV4_FN),
+	PINMUX_DATA(A19_MARK, PTV3_FN),
+	PINMUX_DATA(A18_MARK, PTV2_FN),
+	PINMUX_DATA(A17_MARK, PTV1_FN),
+	PINMUX_DATA(A16_MARK, PTV0_FN),
+
+	/* PTW FN */
+	PINMUX_DATA(A15_MARK, PTW7_FN),
+	PINMUX_DATA(A14_MARK, PTW6_FN),
+	PINMUX_DATA(A13_MARK, PTW5_FN),
+	PINMUX_DATA(A12_MARK, PTW4_FN),
+	PINMUX_DATA(A11_MARK, PTW3_FN),
+	PINMUX_DATA(A10_MARK, PTW2_FN),
+	PINMUX_DATA(A9_MARK, PTW1_FN),
+	PINMUX_DATA(A8_MARK, PTW0_FN),
+
+	/* PTX FN */
+	PINMUX_DATA(A7_MARK, PTX7_FN),
+	PINMUX_DATA(A6_MARK, PTX6_FN),
+	PINMUX_DATA(A5_MARK, PTX5_FN),
+	PINMUX_DATA(A4_MARK, PTX4_FN),
+	PINMUX_DATA(A3_MARK, PTX3_FN),
+	PINMUX_DATA(A2_MARK, PTX2_FN),
+	PINMUX_DATA(A1_MARK, PTX1_FN),
+	PINMUX_DATA(A0_MARK, PTX0_FN),
+
+	/* PTY FN */
+	PINMUX_DATA(D7_MARK, PTY7_FN),
+	PINMUX_DATA(D6_MARK, PTY6_FN),
+	PINMUX_DATA(D5_MARK, PTY5_FN),
+	PINMUX_DATA(D4_MARK, PTY4_FN),
+	PINMUX_DATA(D3_MARK, PTY3_FN),
+	PINMUX_DATA(D2_MARK, PTY2_FN),
+	PINMUX_DATA(D1_MARK, PTY1_FN),
+	PINMUX_DATA(D0_MARK, PTY0_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PTA */
+	PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+	PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+	PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+	PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+	PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+	PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+	PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+	PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+	/* PTB */
+	PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+	PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+	PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+	PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+	PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+	PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+	PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+	PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+	/* PTC */
+	PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+	PINMUX_GPIO(GPIO_PTC6, PTC6_DATA),
+	PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+	PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+	PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+	PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+	PINMUX_GPIO(GPIO_PTC1, PTC1_DATA),
+	PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+	/* PTD */
+	PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+	PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+	PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+	PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+	PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+	PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+	PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+	PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+	/* PTE */
+	PINMUX_GPIO(GPIO_PTE7, PTE7_DATA),
+	PINMUX_GPIO(GPIO_PTE6, PTE6_DATA),
+	PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+	PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+	PINMUX_GPIO(GPIO_PTE3, PTE3_DATA),
+	PINMUX_GPIO(GPIO_PTE2, PTE2_DATA),
+	PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+	PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+	/* PTF */
+	PINMUX_GPIO(GPIO_PTF7, PTF7_DATA),
+	PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+	PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+	PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+	PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+	PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+	PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+	PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+	/* PTG */
+	PINMUX_GPIO(GPIO_PTG7, PTG7_DATA),
+	PINMUX_GPIO(GPIO_PTG6, PTG6_DATA),
+	PINMUX_GPIO(GPIO_PTG5, PTG5_DATA),
+	PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+	PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+	PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+	PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+	PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+	/* PTH */
+	PINMUX_GPIO(GPIO_PTH7, PTH7_DATA),
+	PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+	PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+	PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+	PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+	PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+	PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+	PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+	/* PTI */
+	PINMUX_GPIO(GPIO_PTI7, PTI7_DATA),
+	PINMUX_GPIO(GPIO_PTI6, PTI6_DATA),
+	PINMUX_GPIO(GPIO_PTI5, PTI5_DATA),
+	PINMUX_GPIO(GPIO_PTI4, PTI4_DATA),
+	PINMUX_GPIO(GPIO_PTI3, PTI3_DATA),
+	PINMUX_GPIO(GPIO_PTI2, PTI2_DATA),
+	PINMUX_GPIO(GPIO_PTI1, PTI1_DATA),
+	PINMUX_GPIO(GPIO_PTI0, PTI0_DATA),
+
+	/* PTJ */
+	PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA),
+	PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA),
+	PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+	PINMUX_GPIO(GPIO_PTJ4, PTJ4_DATA),
+	PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA),
+	PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA),
+	PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+	PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+	/* PTK */
+	PINMUX_GPIO(GPIO_PTK7, PTK7_DATA),
+	PINMUX_GPIO(GPIO_PTK6, PTK6_DATA),
+	PINMUX_GPIO(GPIO_PTK5, PTK5_DATA),
+	PINMUX_GPIO(GPIO_PTK4, PTK4_DATA),
+	PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+	PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+	PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+	PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+	/* PTL */
+	PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+	PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+	PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+	PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+	PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+	PINMUX_GPIO(GPIO_PTL2, PTL2_DATA),
+	PINMUX_GPIO(GPIO_PTL1, PTL1_DATA),
+	PINMUX_GPIO(GPIO_PTL0, PTL0_DATA),
+
+	/* PTM */
+	PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+	PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+	PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+	PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+	PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+	PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+	PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+	/* PTN */
+	PINMUX_GPIO(GPIO_PTN7, PTN7_DATA),
+	PINMUX_GPIO(GPIO_PTN6, PTN6_DATA),
+	PINMUX_GPIO(GPIO_PTN5, PTN5_DATA),
+	PINMUX_GPIO(GPIO_PTN4, PTN4_DATA),
+	PINMUX_GPIO(GPIO_PTN3, PTN3_DATA),
+	PINMUX_GPIO(GPIO_PTN2, PTN2_DATA),
+	PINMUX_GPIO(GPIO_PTN1, PTN1_DATA),
+	PINMUX_GPIO(GPIO_PTN0, PTN0_DATA),
+
+	/* PTO */
+	PINMUX_GPIO(GPIO_PTO7, PTO7_DATA),
+	PINMUX_GPIO(GPIO_PTO6, PTO6_DATA),
+	PINMUX_GPIO(GPIO_PTO5, PTO5_DATA),
+	PINMUX_GPIO(GPIO_PTO4, PTO4_DATA),
+	PINMUX_GPIO(GPIO_PTO3, PTO3_DATA),
+	PINMUX_GPIO(GPIO_PTO2, PTO2_DATA),
+	PINMUX_GPIO(GPIO_PTO1, PTO1_DATA),
+	PINMUX_GPIO(GPIO_PTO0, PTO0_DATA),
+
+	/* PTP */
+	PINMUX_GPIO(GPIO_PTP6, PTP6_DATA),
+	PINMUX_GPIO(GPIO_PTP5, PTP5_DATA),
+	PINMUX_GPIO(GPIO_PTP4, PTP4_DATA),
+	PINMUX_GPIO(GPIO_PTP3, PTP3_DATA),
+	PINMUX_GPIO(GPIO_PTP2, PTP2_DATA),
+	PINMUX_GPIO(GPIO_PTP1, PTP1_DATA),
+	PINMUX_GPIO(GPIO_PTP0, PTP0_DATA),
+
+	/* PTQ */
+	PINMUX_GPIO(GPIO_PTQ6, PTQ6_DATA),
+	PINMUX_GPIO(GPIO_PTQ5, PTQ5_DATA),
+	PINMUX_GPIO(GPIO_PTQ4, PTQ4_DATA),
+	PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA),
+	PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA),
+	PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA),
+	PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA),
+
+	/* PTR */
+	PINMUX_GPIO(GPIO_PTR7, PTR7_DATA),
+	PINMUX_GPIO(GPIO_PTR6, PTR6_DATA),
+	PINMUX_GPIO(GPIO_PTR5, PTR5_DATA),
+	PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+	PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+	PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+	PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+	PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+	/* PTS */
+	PINMUX_GPIO(GPIO_PTS7, PTS7_DATA),
+	PINMUX_GPIO(GPIO_PTS6, PTS6_DATA),
+	PINMUX_GPIO(GPIO_PTS5, PTS5_DATA),
+	PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+	PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+	PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+	PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+	PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+	/* PTT */
+	PINMUX_GPIO(GPIO_PTT5, PTT5_DATA),
+	PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+	PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+	PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+	PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+	PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+	/* PTU */
+	PINMUX_GPIO(GPIO_PTU7, PTU7_DATA),
+	PINMUX_GPIO(GPIO_PTU6, PTU6_DATA),
+	PINMUX_GPIO(GPIO_PTU5, PTU5_DATA),
+	PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+	PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+	PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+	PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+	PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+	/* PTV */
+	PINMUX_GPIO(GPIO_PTV7, PTV7_DATA),
+	PINMUX_GPIO(GPIO_PTV6, PTV6_DATA),
+	PINMUX_GPIO(GPIO_PTV5, PTV5_DATA),
+	PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+	PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+	PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+	PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+	PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+	/* PTW */
+	PINMUX_GPIO(GPIO_PTW7, PTW7_DATA),
+	PINMUX_GPIO(GPIO_PTW6, PTW6_DATA),
+	PINMUX_GPIO(GPIO_PTW5, PTW5_DATA),
+	PINMUX_GPIO(GPIO_PTW4, PTW4_DATA),
+	PINMUX_GPIO(GPIO_PTW3, PTW3_DATA),
+	PINMUX_GPIO(GPIO_PTW2, PTW2_DATA),
+	PINMUX_GPIO(GPIO_PTW1, PTW1_DATA),
+	PINMUX_GPIO(GPIO_PTW0, PTW0_DATA),
+
+	/* PTX */
+	PINMUX_GPIO(GPIO_PTX7, PTX7_DATA),
+	PINMUX_GPIO(GPIO_PTX6, PTX6_DATA),
+	PINMUX_GPIO(GPIO_PTX5, PTX5_DATA),
+	PINMUX_GPIO(GPIO_PTX4, PTX4_DATA),
+	PINMUX_GPIO(GPIO_PTX3, PTX3_DATA),
+	PINMUX_GPIO(GPIO_PTX2, PTX2_DATA),
+	PINMUX_GPIO(GPIO_PTX1, PTX1_DATA),
+	PINMUX_GPIO(GPIO_PTX0, PTX0_DATA),
+
+	/* PTY */
+	PINMUX_GPIO(GPIO_PTY7, PTY7_DATA),
+	PINMUX_GPIO(GPIO_PTY6, PTY6_DATA),
+	PINMUX_GPIO(GPIO_PTY5, PTY5_DATA),
+	PINMUX_GPIO(GPIO_PTY4, PTY4_DATA),
+	PINMUX_GPIO(GPIO_PTY3, PTY3_DATA),
+	PINMUX_GPIO(GPIO_PTY2, PTY2_DATA),
+	PINMUX_GPIO(GPIO_PTY1, PTY1_DATA),
+	PINMUX_GPIO(GPIO_PTY0, PTY0_DATA),
+
+	/* PTZ */
+	PINMUX_GPIO(GPIO_PTZ7, PTZ7_DATA),
+	PINMUX_GPIO(GPIO_PTZ6, PTZ6_DATA),
+	PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA),
+	PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA),
+	PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA),
+	PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA),
+	PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA),
+	PINMUX_GPIO(GPIO_PTZ0, PTZ0_DATA),
+
+	/* PTA (mobule: LBSC, CPG, LPC) */
+	PINMUX_GPIO(GPIO_FN_BS, BS_MARK),
+	PINMUX_GPIO(GPIO_FN_RDWR, RDWR_MARK),
+	PINMUX_GPIO(GPIO_FN_WE1, WE1_MARK),
+	PINMUX_GPIO(GPIO_FN_RDY, RDY_MARK),
+	PINMUX_GPIO(GPIO_FN_MD10, MD10_MARK),
+	PINMUX_GPIO(GPIO_FN_MD9, MD9_MARK),
+	PINMUX_GPIO(GPIO_FN_MD8, MD8_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO7, LGPIO7_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO6, LGPIO6_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO5, LGPIO5_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO4, LGPIO4_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO3, LGPIO3_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO2, LGPIO2_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO1, LGPIO1_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO0, LGPIO0_MARK),
+
+	/* PTB (mobule: LBSC, EtherC, SIM, LPC) */
+	PINMUX_GPIO(GPIO_FN_D15, D15_MARK),
+	PINMUX_GPIO(GPIO_FN_D14, D14_MARK),
+	PINMUX_GPIO(GPIO_FN_D13, D13_MARK),
+	PINMUX_GPIO(GPIO_FN_D12, D12_MARK),
+	PINMUX_GPIO(GPIO_FN_D11, D11_MARK),
+	PINMUX_GPIO(GPIO_FN_D10, D10_MARK),
+	PINMUX_GPIO(GPIO_FN_D9, D9_MARK),
+	PINMUX_GPIO(GPIO_FN_D8, D8_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_MDC, ET0_MDC_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_MDIO, ET0_MDIO_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_MDC, ET1_MDC_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_MDIO, ET1_MDIO_MARK),
+	PINMUX_GPIO(GPIO_FN_WPSZ1, WPSZ1_MARK),
+	PINMUX_GPIO(GPIO_FN_WPSZ0, WPSZ0_MARK),
+	PINMUX_GPIO(GPIO_FN_FWID, FWID_MARK),
+	PINMUX_GPIO(GPIO_FN_FLSHSZ, FLSHSZ_MARK),
+	PINMUX_GPIO(GPIO_FN_LPC_SPIEN, LPC_SPIEN_MARK),
+	PINMUX_GPIO(GPIO_FN_BASEL, BASEL_MARK),
+
+	/* PTC (mobule: SD) */
+	PINMUX_GPIO(GPIO_FN_SD_WP, SD_WP_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_CD, SD_CD_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_CLK, SD_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_CMD, SD_CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D3, SD_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D2, SD_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D1, SD_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D0, SD_D0_MARK),
+
+	/* PTD (mobule: INTC, SPI0, LBSC, CPG, ADC) */
+	PINMUX_GPIO(GPIO_FN_IRQ7, IRQ7_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ6, IRQ6_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ5, IRQ5_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4, IRQ4_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3, IRQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2, IRQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1, IRQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ0, IRQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_MD6, MD6_MARK),
+	PINMUX_GPIO(GPIO_FN_MD5, MD5_MARK),
+	PINMUX_GPIO(GPIO_FN_MD3, MD3_MARK),
+	PINMUX_GPIO(GPIO_FN_MD2, MD2_MARK),
+	PINMUX_GPIO(GPIO_FN_MD1, MD1_MARK),
+	PINMUX_GPIO(GPIO_FN_MD0, MD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ADTRG1, ADTRG1_MARK),
+	PINMUX_GPIO(GPIO_FN_ADTRG0, ADTRG0_MARK),
+
+	/* PTE (mobule: EtherC) */
+	PINMUX_GPIO(GPIO_FN_ET0_CRS_DV, ET0_CRS_DV_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_TXD1, ET0_TXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_TXD0, ET0_TXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_TX_EN, ET0_TX_EN_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_REF_CLK, ET0_REF_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_RXD1, ET0_RXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_RXD0, ET0_RXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_RX_ER, ET0_RX_ER_MARK),
+
+	/* PTF (mobule: EtherC) */
+	PINMUX_GPIO(GPIO_FN_ET1_CRS_DV, ET1_CRS_DV_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_TXD1, ET1_TXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_TXD0, ET1_TXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_TX_EN, ET1_TX_EN_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_REF_CLK, ET1_REF_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_RXD1, ET1_RXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_RXD0, ET1_RXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_RX_ER, ET1_RX_ER_MARK),
+
+	/* PTG (mobule: SYSTEM, PWMX, LPC) */
+	PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS1, STATUS1_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX0, PWX0_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX1, PWX1_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX2, PWX2_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX3, PWX3_MARK),
+	PINMUX_GPIO(GPIO_FN_SERIRQ, SERIRQ_MARK),
+	PINMUX_GPIO(GPIO_FN_CLKRUN, CLKRUN_MARK),
+	PINMUX_GPIO(GPIO_FN_LPCPD, LPCPD_MARK),
+	PINMUX_GPIO(GPIO_FN_LDRQ, LDRQ_MARK),
+
+	/* PTH (mobule: TMU, SCIF234, SPI1, SPI0) */
+	PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD4, RXD4_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD4, TXD4_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_MOSI, SP1_MOSI_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_MISO, SP1_MISO_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SCK, SP1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SCK_FB, SP1_SCK_FB_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SS0, SP1_SS0_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SS1, SP1_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_SP0_SS1, SP0_SS1_MARK),
+
+	/* PTI (mobule: INTC) */
+	PINMUX_GPIO(GPIO_FN_IRQ15, IRQ15_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ14, IRQ14_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ13, IRQ13_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ12, IRQ12_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ11, IRQ11_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ10, IRQ10_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ9, IRQ9_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ8, IRQ8_MARK),
+
+	/* PTJ (mobule: SCIF234, SERMUX) */
+	PINMUX_GPIO(GPIO_FN_RXD3, RXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD3, TXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD2, RXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD2, TXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_TXD, COM1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_RXD, COM1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_RTS, COM1_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_CTS, COM1_CTS_MARK),
+
+	/* PTK (mobule: SERMUX) */
+	PINMUX_GPIO(GPIO_FN_COM2_TXD, COM2_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_RXD, COM2_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_RTS, COM2_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_CTS, COM2_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_DTR, COM2_DTR_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_DSR, COM2_DSR_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_DCD, COM2_DCD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_RI, COM2_RI_MARK),
+
+	/* PTL (mobule: SERMUX) */
+	PINMUX_GPIO(GPIO_FN_RAC_TXD, RAC_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_RXD, RAC_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_RTS, RAC_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_CTS, RAC_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_DTR, RAC_DTR_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_DSR, RAC_DSR_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_DCD, RAC_DCD_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_RI, RAC_RI_MARK),
+
+	/* PTM (mobule: IIC, LPC) */
+	PINMUX_GPIO(GPIO_FN_SDA6, SDA6_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL6, SCL6_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA7, SDA7_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL7, SCL7_MARK),
+	PINMUX_GPIO(GPIO_FN_WP, WP_MARK),
+	PINMUX_GPIO(GPIO_FN_FMS0, FMS0_MARK),
+	PINMUX_GPIO(GPIO_FN_FMS1, FMS1_MARK),
+
+	/* PTN (mobule: SCIF234, EVC) */
+	PINMUX_GPIO(GPIO_FN_SCK2, SCK2_MARK),
+	PINMUX_GPIO(GPIO_FN_RTS4, RTS4_MARK),
+	PINMUX_GPIO(GPIO_FN_RTS3, RTS3_MARK),
+	PINMUX_GPIO(GPIO_FN_RTS2, RTS2_MARK),
+	PINMUX_GPIO(GPIO_FN_CTS4, CTS4_MARK),
+	PINMUX_GPIO(GPIO_FN_CTS3, CTS3_MARK),
+	PINMUX_GPIO(GPIO_FN_CTS2, CTS2_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT7, EVENT7_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT6, EVENT6_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT5, EVENT5_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT4, EVENT4_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT3, EVENT3_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT2, EVENT2_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT1, EVENT1_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT0, EVENT0_MARK),
+
+	/* PTO (mobule: SGPIO) */
+	PINMUX_GPIO(GPIO_FN_SGPIO0_CLK, SGPIO0_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO0_LOAD, SGPIO0_LOAD_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO0_DI, SGPIO0_DI_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO0_DO, SGPIO0_DO_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_CLK, SGPIO1_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_LOAD, SGPIO1_LOAD_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_DI, SGPIO1_DI_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_DO, SGPIO1_DO_MARK),
+
+	/* PTP (mobule: JMC, SCIF234) */
+	PINMUX_GPIO(GPIO_FN_JMCTCK, JMCTCK_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCTMS, JMCTMS_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCTDO, JMCTDO_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCTDI, JMCTDI_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCRST, JMCRST_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK4, SCK4_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK3, SCK3_MARK),
+
+	/* PTQ (mobule: LPC) */
+	PINMUX_GPIO(GPIO_FN_LAD3, LAD3_MARK),
+	PINMUX_GPIO(GPIO_FN_LAD2, LAD2_MARK),
+	PINMUX_GPIO(GPIO_FN_LAD1, LAD1_MARK),
+	PINMUX_GPIO(GPIO_FN_LAD0, LAD0_MARK),
+	PINMUX_GPIO(GPIO_FN_LFRAME, LFRAME_MARK),
+	PINMUX_GPIO(GPIO_FN_LRESET, LRESET_MARK),
+	PINMUX_GPIO(GPIO_FN_LCLK, LCLK_MARK),
+
+	/* PTR (mobule: GRA, IIC) */
+	PINMUX_GPIO(GPIO_FN_DDC3, DDC3_MARK),
+	PINMUX_GPIO(GPIO_FN_DDC2, DDC2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA8, SDA8_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL8, SCL8_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA2, SDA2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL2, SCL2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA1, SDA1_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL1, SCL1_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA0, SDA0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL0, SCL0_MARK),
+
+	/* PTS (mobule: GRA, IIC) */
+	PINMUX_GPIO(GPIO_FN_DDC1, DDC1_MARK),
+	PINMUX_GPIO(GPIO_FN_DDC0, DDC0_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA9, SDA9_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL9, SCL9_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA5, SDA5_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL5, SCL5_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA4, SDA4_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL4, SCL4_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA3, SDA3_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL3, SCL3_MARK),
+
+	/* PTT (mobule: SYSTEM, PWMX) */
+	PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDCK, AUDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX7, PWX7_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX6, PWX6_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX5, PWX5_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX4, PWX4_MARK),
+
+	/* PTU (mobule: LBSC, DMAC) */
+	PINMUX_GPIO(GPIO_FN_CS6, CS6_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5, CS5_MARK),
+	PINMUX_GPIO(GPIO_FN_CS4, CS4_MARK),
+	PINMUX_GPIO(GPIO_FN_CS0, CS0_MARK),
+	PINMUX_GPIO(GPIO_FN_RD, RD_MARK),
+	PINMUX_GPIO(GPIO_FN_WE0, WE0_MARK),
+	PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+	PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK0, DACK0_MARK),
+
+	/* PTV (mobule: LBSC, DMAC) */
+	PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+	PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+	PINMUX_GPIO(GPIO_FN_A21, A21_MARK),
+	PINMUX_GPIO(GPIO_FN_A20, A20_MARK),
+	PINMUX_GPIO(GPIO_FN_A19, A19_MARK),
+	PINMUX_GPIO(GPIO_FN_A18, A18_MARK),
+	PINMUX_GPIO(GPIO_FN_A17, A17_MARK),
+	PINMUX_GPIO(GPIO_FN_A16, A16_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND0, TEND0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK1, DACK1_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND1, TEND1_MARK),
+
+	/* PTW (mobule: LBSC) */
+	PINMUX_GPIO(GPIO_FN_A16, A16_MARK),
+	PINMUX_GPIO(GPIO_FN_A15, A15_MARK),
+	PINMUX_GPIO(GPIO_FN_A14, A14_MARK),
+	PINMUX_GPIO(GPIO_FN_A13, A13_MARK),
+	PINMUX_GPIO(GPIO_FN_A12, A12_MARK),
+	PINMUX_GPIO(GPIO_FN_A11, A11_MARK),
+	PINMUX_GPIO(GPIO_FN_A10, A10_MARK),
+	PINMUX_GPIO(GPIO_FN_A9, A9_MARK),
+	PINMUX_GPIO(GPIO_FN_A8, A8_MARK),
+
+	/* PTX (mobule: LBSC) */
+	PINMUX_GPIO(GPIO_FN_A7, A7_MARK),
+	PINMUX_GPIO(GPIO_FN_A6, A6_MARK),
+	PINMUX_GPIO(GPIO_FN_A5, A5_MARK),
+	PINMUX_GPIO(GPIO_FN_A4, A4_MARK),
+	PINMUX_GPIO(GPIO_FN_A3, A3_MARK),
+	PINMUX_GPIO(GPIO_FN_A2, A2_MARK),
+	PINMUX_GPIO(GPIO_FN_A1, A1_MARK),
+	PINMUX_GPIO(GPIO_FN_A0, A0_MARK),
+
+	/* PTY (mobule: LBSC) */
+	PINMUX_GPIO(GPIO_FN_D7, D7_MARK),
+	PINMUX_GPIO(GPIO_FN_D6, D6_MARK),
+	PINMUX_GPIO(GPIO_FN_D5, D5_MARK),
+	PINMUX_GPIO(GPIO_FN_D4, D4_MARK),
+	PINMUX_GPIO(GPIO_FN_D3, D3_MARK),
+	PINMUX_GPIO(GPIO_FN_D2, D2_MARK),
+	PINMUX_GPIO(GPIO_FN_D1, D1_MARK),
+	PINMUX_GPIO(GPIO_FN_D0, D0_MARK),
+ };
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xffec0000, 16, 2) {
+		PTA7_FN, PTA7_OUT, PTA7_IN, 0,
+		PTA6_FN, PTA6_OUT, PTA6_IN, 0,
+		PTA5_FN, PTA5_OUT, PTA5_IN, 0,
+		PTA4_FN, PTA4_OUT, PTA4_IN, 0,
+		PTA3_FN, PTA3_OUT, PTA3_IN, 0,
+		PTA2_FN, PTA2_OUT, PTA2_IN, 0,
+		PTA1_FN, PTA1_OUT, PTA1_IN, 0,
+		PTA0_FN, PTA0_OUT, PTA0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xffec0002, 16, 2) {
+		PTB7_FN, PTB7_OUT, PTB7_IN, 0,
+		PTB6_FN, PTB6_OUT, PTB6_IN, 0,
+		PTB5_FN, PTB5_OUT, PTB5_IN, 0,
+		PTB4_FN, PTB4_OUT, PTB4_IN, 0,
+		PTB3_FN, PTB3_OUT, PTB3_IN, 0,
+		PTB2_FN, PTB2_OUT, PTB2_IN, 0,
+		PTB1_FN, PTB1_OUT, PTB1_IN, 0,
+		PTB0_FN, PTB0_OUT, PTB0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xffec0004, 16, 2) {
+		PTC7_FN, PTC7_OUT, PTC7_IN, 0,
+		PTC6_FN, PTC6_OUT, PTC6_IN, 0,
+		PTC5_FN, PTC5_OUT, PTC5_IN, 0,
+		PTC4_FN, PTC4_OUT, PTC4_IN, 0,
+		PTC3_FN, PTC3_OUT, PTC3_IN, 0,
+		PTC2_FN, PTC2_OUT, PTC2_IN, 0,
+		PTC1_FN, PTC1_OUT, PTC1_IN, 0,
+		PTC0_FN, PTC0_OUT, PTC0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xffec0006, 16, 2) {
+		PTD7_FN, PTD7_OUT, PTD7_IN, 0,
+		PTD6_FN, PTD6_OUT, PTD6_IN, 0,
+		PTD5_FN, PTD5_OUT, PTD5_IN, 0,
+		PTD4_FN, PTD4_OUT, PTD4_IN, 0,
+		PTD3_FN, PTD3_OUT, PTD3_IN, 0,
+		PTD2_FN, PTD2_OUT, PTD2_IN, 0,
+		PTD1_FN, PTD1_OUT, PTD1_IN, 0,
+		PTD0_FN, PTD0_OUT, PTD0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xffec0008, 16, 2) {
+		PTE7_FN, PTE7_OUT, PTE7_IN, 0,
+		PTE6_FN, PTE6_OUT, PTE6_IN, 0,
+		PTE5_FN, PTE5_OUT, PTE5_IN, 0,
+		PTE4_FN, PTE4_OUT, PTE4_IN, 0,
+		PTE3_FN, PTE3_OUT, PTE3_IN, 0,
+		PTE2_FN, PTE2_OUT, PTE2_IN, 0,
+		PTE1_FN, PTE1_OUT, PTE1_IN, 0,
+		PTE0_FN, PTE0_OUT, PTE0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xffec000a, 16, 2) {
+		PTF7_FN, PTF7_OUT, PTF7_IN, 0,
+		PTF6_FN, PTF6_OUT, PTF6_IN, 0,
+		PTF5_FN, PTF5_OUT, PTF5_IN, 0,
+		PTF4_FN, PTF4_OUT, PTF4_IN, 0,
+		PTF3_FN, PTF3_OUT, PTF3_IN, 0,
+		PTF2_FN, PTF2_OUT, PTF2_IN, 0,
+		PTF1_FN, PTF1_OUT, PTF1_IN, 0,
+		PTF0_FN, PTF0_OUT, PTF0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xffec000c, 16, 2) {
+		PTG7_FN, PTG7_OUT, PTG7_IN, 0,
+		PTG6_FN, PTG6_OUT, PTG6_IN, 0,
+		PTG5_FN, PTG5_OUT, PTG5_IN, 0,
+		PTG4_FN, PTG4_OUT, PTG4_IN, 0,
+		PTG3_FN, PTG3_OUT, PTG3_IN, 0,
+		PTG2_FN, PTG2_OUT, PTG2_IN, 0,
+		PTG1_FN, PTG1_OUT, PTG1_IN, 0,
+		PTG0_FN, PTG0_OUT, PTG0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xffec000e, 16, 2) {
+		PTH7_FN, PTH7_OUT, PTH7_IN, 0,
+		PTH6_FN, PTH6_OUT, PTH6_IN, 0,
+		PTH5_FN, PTH5_OUT, PTH5_IN, 0,
+		PTH4_FN, PTH4_OUT, PTH4_IN, 0,
+		PTH3_FN, PTH3_OUT, PTH3_IN, 0,
+		PTH2_FN, PTH2_OUT, PTH2_IN, 0,
+		PTH1_FN, PTH1_OUT, PTH1_IN, 0,
+		PTH0_FN, PTH0_OUT, PTH0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PICR", 0xffec0010, 16, 2) {
+		PTI7_FN, PTI7_OUT, PTI7_IN, 0,
+		PTI6_FN, PTI6_OUT, PTI6_IN, 0,
+		PTI5_FN, PTI5_OUT, PTI5_IN, 0,
+		PTI4_FN, PTI4_OUT, PTI4_IN, 0,
+		PTI3_FN, PTI3_OUT, PTI3_IN, 0,
+		PTI2_FN, PTI2_OUT, PTI2_IN, 0,
+		PTI1_FN, PTI1_OUT, PTI1_IN, 0,
+		PTI0_FN, PTI0_OUT, PTI0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xffec0012, 16, 2) {
+		PTJ7_FN, PTJ7_OUT, PTJ7_IN, 0,
+		PTJ6_FN, PTJ6_OUT, PTJ6_IN, 0,
+		PTJ5_FN, PTJ5_OUT, PTJ5_IN, 0,
+		PTJ4_FN, PTJ4_OUT, PTJ4_IN, 0,
+		PTJ3_FN, PTJ3_OUT, PTJ3_IN, 0,
+		PTJ2_FN, PTJ2_OUT, PTJ2_IN, 0,
+		PTJ1_FN, PTJ1_OUT, PTJ1_IN, 0,
+		PTJ0_FN, PTJ0_OUT, PTJ0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xffec0014, 16, 2) {
+		PTK7_FN, PTK7_OUT, PTK7_IN, 0,
+		PTK6_FN, PTK6_OUT, PTK6_IN, 0,
+		PTK5_FN, PTK5_OUT, PTK5_IN, 0,
+		PTK4_FN, PTK4_OUT, PTK4_IN, 0,
+		PTK3_FN, PTK3_OUT, PTK3_IN, 0,
+		PTK2_FN, PTK2_OUT, PTK2_IN, 0,
+		PTK1_FN, PTK1_OUT, PTK1_IN, 0,
+		PTK0_FN, PTK0_OUT, PTK0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xffec0016, 16, 2) {
+		PTL7_FN, PTL7_OUT, PTL7_IN, 0,
+		PTL6_FN, PTL6_OUT, PTL6_IN, 0,
+		PTL5_FN, PTL5_OUT, PTL5_IN, 0,
+		PTL4_FN, PTL4_OUT, PTL4_IN, 0,
+		PTL3_FN, PTL3_OUT, PTL3_IN, 0,
+		PTL2_FN, PTL2_OUT, PTL2_IN, 0,
+		PTL1_FN, PTL1_OUT, PTL1_IN, 0,
+		PTL0_FN, PTL0_OUT, PTL0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xffec0018, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTM6_FN, PTM6_OUT, PTM6_IN, 0,
+		PTM5_FN, PTM5_OUT, PTM5_IN, 0,
+		PTM4_FN, PTM4_OUT, PTM4_IN, 0,
+		PTM3_FN, PTM3_OUT, PTM3_IN, 0,
+		PTM2_FN, PTM2_OUT, PTM2_IN, 0,
+		PTM1_FN, PTM1_OUT, PTM1_IN, 0,
+		PTM0_FN, PTM0_OUT, PTM0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PNCR", 0xffec001a, 16, 2) {
+		PTN7_FN, PTN7_OUT, PTN7_IN, 0,
+		PTN6_FN, PTN6_OUT, PTN6_IN, 0,
+		PTN5_FN, PTN5_OUT, PTN5_IN, 0,
+		PTN4_FN, PTN4_OUT, PTN4_IN, 0,
+		PTN3_FN, PTN3_OUT, PTN3_IN, 0,
+		PTN2_FN, PTN2_OUT, PTN2_IN, 0,
+		PTN1_FN, PTN1_OUT, PTN1_IN, 0,
+		PTN0_FN, PTN0_OUT, PTN0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("POCR", 0xffec001c, 16, 2) {
+		PTO7_FN, PTO7_OUT, PTO7_IN, 0,
+		PTO6_FN, PTO6_OUT, PTO6_IN, 0,
+		PTO5_FN, PTO5_OUT, PTO5_IN, 0,
+		PTO4_FN, PTO4_OUT, PTO4_IN, 0,
+		PTO3_FN, PTO3_OUT, PTO3_IN, 0,
+		PTO2_FN, PTO2_OUT, PTO2_IN, 0,
+		PTO1_FN, PTO1_OUT, PTO1_IN, 0,
+		PTO0_FN, PTO0_OUT, PTO0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PPCR", 0xffec001e, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTP6_FN, PTP6_OUT, PTP6_IN, 0,
+		PTP5_FN, PTP5_OUT, PTP5_IN, 0,
+		PTP4_FN, PTP4_OUT, PTP4_IN, 0,
+		PTP3_FN, PTP3_OUT, PTP3_IN, 0,
+		PTP2_FN, PTP2_OUT, PTP2_IN, 0,
+		PTP1_FN, PTP1_OUT, PTP1_IN, 0,
+		PTP0_FN, PTP0_OUT, PTP0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PQCR", 0xffec0020, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTQ6_FN, PTQ6_OUT, PTQ6_IN, 0,
+		PTQ5_FN, PTQ5_OUT, PTQ5_IN, 0,
+		PTQ4_FN, PTQ4_OUT, PTQ4_IN, 0,
+		PTQ3_FN, PTQ3_OUT, PTQ3_IN, 0,
+		PTQ2_FN, PTQ2_OUT, PTQ2_IN, 0,
+		PTQ1_FN, PTQ1_OUT, PTQ1_IN, 0,
+		PTQ0_FN, PTQ0_OUT, PTQ0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xffec0022, 16, 2) {
+		PTR7_FN, PTR7_OUT, PTR7_IN, 0,
+		PTR6_FN, PTR6_OUT, PTR6_IN, 0,
+		PTR5_FN, PTR5_OUT, PTR5_IN, 0,
+		PTR4_FN, PTR4_OUT, PTR4_IN, 0,
+		PTR3_FN, PTR3_OUT, PTR3_IN, 0,
+		PTR2_FN, PTR2_OUT, PTR2_IN, 0,
+		PTR1_FN, PTR1_OUT, PTR1_IN, 0,
+		PTR0_FN, PTR0_OUT, PTR0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PSCR", 0xffec0024, 16, 2) {
+		PTS7_FN, PTS7_OUT, PTS7_IN, 0,
+		PTS6_FN, PTS6_OUT, PTS6_IN, 0,
+		PTS5_FN, PTS5_OUT, PTS5_IN, 0,
+		PTS4_FN, PTS4_OUT, PTS4_IN, 0,
+		PTS3_FN, PTS3_OUT, PTS3_IN, 0,
+		PTS2_FN, PTS2_OUT, PTS2_IN, 0,
+		PTS1_FN, PTS1_OUT, PTS1_IN, 0,
+		PTS0_FN, PTS0_OUT, PTS0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PTCR", 0xffec0026, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTT5_FN, PTT5_OUT, PTT5_IN, 0,
+		PTT4_FN, PTT4_OUT, PTT4_IN, 0,
+		PTT3_FN, PTT3_OUT, PTT3_IN, 0,
+		PTT2_FN, PTT2_OUT, PTT2_IN, 0,
+		PTT1_FN, PTT1_OUT, PTT1_IN, 0,
+		PTT0_FN, PTT0_OUT, PTT0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PUCR", 0xffec0028, 16, 2) {
+		PTU7_FN, PTU7_OUT, PTU7_IN, PTU7_IN_PU,
+		PTU6_FN, PTU6_OUT, PTU6_IN, PTU6_IN_PU,
+		PTU5_FN, PTU5_OUT, PTU5_IN, PTU5_IN_PU,
+		PTU4_FN, PTU4_OUT, PTU4_IN, PTU4_IN_PU,
+		PTU3_FN, PTU3_OUT, PTU3_IN, PTU3_IN_PU,
+		PTU2_FN, PTU2_OUT, PTU2_IN, PTU2_IN_PU,
+		PTU1_FN, PTU1_OUT, PTU1_IN, PTU1_IN_PU,
+		PTU0_FN, PTU0_OUT, PTU0_IN, PTU0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PVCR", 0xffec002a, 16, 2) {
+		PTV7_FN, PTV7_OUT, PTV7_IN, PTV7_IN_PU,
+		PTV6_FN, PTV6_OUT, PTV6_IN, PTV6_IN_PU,
+		PTV5_FN, PTV5_OUT, PTV5_IN, PTV5_IN_PU,
+		PTV4_FN, PTV4_OUT, PTV4_IN, PTV4_IN_PU,
+		PTV3_FN, PTV3_OUT, PTV3_IN, PTV3_IN_PU,
+		PTV2_FN, PTV2_OUT, PTV2_IN, PTV2_IN_PU,
+		PTV1_FN, PTV1_OUT, PTV1_IN, PTV1_IN_PU,
+		PTV0_FN, PTV0_OUT, PTV0_IN, PTV0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PWCR", 0xffec002c, 16, 2) {
+		PTW7_FN, PTW7_OUT, PTW7_IN, PTW7_IN_PU,
+		PTW6_FN, PTW6_OUT, PTW6_IN, PTW6_IN_PU,
+		PTW5_FN, PTW5_OUT, PTW5_IN, PTW5_IN_PU,
+		PTW4_FN, PTW4_OUT, PTW4_IN, PTW4_IN_PU,
+		PTW3_FN, PTW3_OUT, PTW3_IN, PTW3_IN_PU,
+		PTW2_FN, PTW2_OUT, PTW2_IN, PTW2_IN_PU,
+		PTW1_FN, PTW1_OUT, PTW1_IN, PTW1_IN_PU,
+		PTW0_FN, PTW0_OUT, PTW0_IN, PTW0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PXCR", 0xffec002e, 16, 2) {
+		PTX7_FN, PTX7_OUT, PTX7_IN, PTX7_IN_PU,
+		PTX6_FN, PTX6_OUT, PTX6_IN, PTX6_IN_PU,
+		PTX5_FN, PTX5_OUT, PTX5_IN, PTX5_IN_PU,
+		PTX4_FN, PTX4_OUT, PTX4_IN, PTX4_IN_PU,
+		PTX3_FN, PTX3_OUT, PTX3_IN, PTX3_IN_PU,
+		PTX2_FN, PTX2_OUT, PTX2_IN, PTX2_IN_PU,
+		PTX1_FN, PTX1_OUT, PTX1_IN, PTX1_IN_PU,
+		PTX0_FN, PTX0_OUT, PTX0_IN, PTX0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PYCR", 0xffec0030, 16, 2) {
+		PTY7_FN, PTY7_OUT, PTY7_IN, PTY7_IN_PU,
+		PTY6_FN, PTY6_OUT, PTY6_IN, PTY6_IN_PU,
+		PTY5_FN, PTY5_OUT, PTY5_IN, PTY5_IN_PU,
+		PTY4_FN, PTY4_OUT, PTY4_IN, PTY4_IN_PU,
+		PTY3_FN, PTY3_OUT, PTY3_IN, PTY3_IN_PU,
+		PTY2_FN, PTY2_OUT, PTY2_IN, PTY2_IN_PU,
+		PTY1_FN, PTY1_OUT, PTY1_IN, PTY1_IN_PU,
+		PTY0_FN, PTY0_OUT, PTY0_IN, PTY0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PZCR", 0xffec0032, 16, 2) {
+		0, PTZ7_OUT, PTZ7_IN, 0,
+		0, PTZ6_OUT, PTZ6_IN, 0,
+		0, PTZ5_OUT, PTZ5_IN, 0,
+		0, PTZ4_OUT, PTZ4_IN, 0,
+		0, PTZ3_OUT, PTZ3_IN, 0,
+		0, PTZ2_OUT, PTZ2_IN, 0,
+		0, PTZ1_OUT, PTZ1_IN, 0,
+		0, PTZ0_OUT, PTZ0_IN, 0 }
+	},
+
+	{ PINMUX_CFG_REG("PSEL0", 0xffec0070, 16, 1) {
+		PS0_15_FN3, PS0_15_FN1,
+		PS0_14_FN3, PS0_14_FN1,
+		PS0_13_FN3, PS0_13_FN1,
+		PS0_12_FN3, PS0_12_FN1,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS0_7_FN2, PS0_7_FN1,
+		PS0_6_FN2, PS0_6_FN1,
+		PS0_5_FN2, PS0_5_FN1,
+		PS0_4_FN2, PS0_4_FN1,
+		PS0_3_FN2, PS0_3_FN1,
+		PS0_2_FN2, PS0_2_FN1,
+		PS0_1_FN2, PS0_1_FN1,
+		0, 0, }
+	},
+	{ PINMUX_CFG_REG("PSEL1", 0xffec0072, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS1_7_FN1, PS1_7_FN3,
+		PS1_6_FN1, PS1_6_FN3,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0, }
+	},
+	{ PINMUX_CFG_REG("PSEL2", 0xffec0074, 16, 1) {
+		0, 0,
+		0, 0,
+		PS2_13_FN3, PS2_13_FN1,
+		PS2_12_FN3, PS2_12_FN1,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS2_1_FN1, PS2_1_FN2,
+		PS2_0_FN1, PS2_0_FN2, }
+	},
+	{ PINMUX_CFG_REG("PSEL4", 0xffec0078, 16, 1) {
+		PS4_15_FN2, PS4_15_FN1,
+		PS4_14_FN2, PS4_14_FN1,
+		PS4_13_FN2, PS4_13_FN1,
+		PS4_12_FN2, PS4_12_FN1,
+		PS4_11_FN2, PS4_11_FN1,
+		PS4_10_FN2, PS4_10_FN1,
+		PS4_9_FN2, PS4_9_FN1,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS4_3_FN2, PS4_3_FN1,
+		PS4_2_FN2, PS4_2_FN1,
+		PS4_1_FN2, PS4_1_FN1,
+		PS4_0_FN2, PS4_0_FN1, }
+	},
+	{ PINMUX_CFG_REG("PSEL5", 0xffec007a, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS5_9_FN1, PS5_9_FN2,
+		PS5_8_FN1, PS5_8_FN2,
+		PS5_7_FN1, PS5_7_FN2,
+		PS5_6_FN1, PS5_6_FN2,
+		PS5_5_FN1, PS5_5_FN2,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0, }
+	},
+	{ PINMUX_CFG_REG("PSEL6", 0xffec007c, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS6_7_FN_AN, PS6_7_FN_EV,
+		PS6_6_FN_AN, PS6_6_FN_EV,
+		PS6_5_FN_AN, PS6_5_FN_EV,
+		PS6_4_FN_AN, PS6_4_FN_EV,
+		PS6_3_FN_AN, PS6_3_FN_EV,
+		PS6_2_FN_AN, PS6_2_FN_EV,
+		PS6_1_FN_AN, PS6_1_FN_EV,
+		PS6_0_FN_AN, PS6_0_FN_EV, }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xffec0034, 8) {
+		PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+		PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xffec0036, 8) {
+		PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+		PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xffec0038, 8) {
+		PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+		PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xffec003a, 8) {
+		PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+		PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xffec003c, 8) {
+		PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+		PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xffec003e, 8) {
+		PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+		PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xffec0040, 8) {
+		PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
+		PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xffec0042, 8) {
+		PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+		PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PIDR", 0xffec0044, 8) {
+		PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
+		PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xffec0046, 8) {
+		PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
+		PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xffec0048, 8) {
+		PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+		PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xffec004a, 8) {
+		PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+		PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xffec004c, 8) {
+		0, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+		PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PNDR", 0xffec004e, 8) {
+		PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+		PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA }
+	},
+	{ PINMUX_DATA_REG("PODR", 0xffec0050, 8) {
+		PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
+		PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA }
+	},
+	{ PINMUX_DATA_REG("PPDR", 0xffec0052, 8) {
+		0, PTP6_DATA, PTP5_DATA, PTP4_DATA,
+		PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA }
+	},
+	{ PINMUX_DATA_REG("PQDR", 0xffec0054, 8) {
+		0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+		PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xffec0056, 8) {
+		PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+		PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+	},
+	{ PINMUX_DATA_REG("PSDR", 0xffec0058, 8) {
+		PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+		PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+	},
+	{ PINMUX_DATA_REG("PTDR", 0xffec005a, 8) {
+		0, 0, PTT5_DATA, PTT4_DATA,
+		PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PUDR", 0xffec005c, 8) {
+		PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+		PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+	},
+	{ PINMUX_DATA_REG("PVDR", 0xffec005e, 8) {
+		PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+		PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+	},
+	{ PINMUX_DATA_REG("PWDR", 0xffec0060, 8) {
+		PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+		PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA }
+	},
+	{ PINMUX_DATA_REG("PXDR", 0xffec0062, 8) {
+		PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+		PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA }
+	},
+	{ PINMUX_DATA_REG("PYDR", 0xffec0064, 8) {
+		PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+		PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA }
+	},
+	{ PINMUX_DATA_REG("PZDR", 0xffec0066, 8) {
+		PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+		PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7757_pinmux_info = {
+	.name = "sh7757_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PTA7,
+	.last_gpio = GPIO_FN_D0,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7757_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 1a956b1beccc..4a9010bf4fd3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -40,7 +40,7 @@ static struct platform_device iic_device = {
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource usb_host_resources[] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index cda76ebf87c3..35097753456c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -13,9 +13,11 @@
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
 #include <linux/uio_driver.h>
+#include <linux/usb/m66592.h>
 #include <linux/sh_timer.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <cpu/sh7722.h>
 
 static struct resource rtc_resources[] = {
 	[0] = {
@@ -45,11 +47,18 @@ static struct platform_device rtc_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(rtc_resources),
 	.resource	= rtc_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_RTC,
+	},
+};
+
+static struct m66592_platdata usbf_platdata = {
+	.on_chip = 1,
 };
 
 static struct resource usbf_resources[] = {
 	[0] = {
-		.name	= "m66592_udc",
+		.name	= "USBF",
 		.start	= 0x04480000,
 		.end	= 0x044800FF,
 		.flags	= IORESOURCE_MEM,
@@ -67,9 +76,13 @@ static struct platform_device usbf_device = {
 	.dev = {
 		.dma_mask		= NULL,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(usbf_resources),
 	.resource	= usbf_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USBF,
+	},
 };
 
 static struct resource iic_resources[] = {
@@ -91,6 +104,9 @@ static struct platform_device iic_device = {
 	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic_resources),
 	.resource       = iic_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC,
+	},
 };
 
 static struct uio_info vpu_platform_data = {
@@ -119,6 +135,9 @@ static struct platform_device vpu_device = {
 	},
 	.resource	= vpu_resources,
 	.num_resources	= ARRAY_SIZE(vpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VPU,
+	},
 };
 
 static struct uio_info veu_platform_data = {
@@ -147,6 +166,9 @@ static struct platform_device veu_device = {
 	},
 	.resource	= veu_resources,
 	.num_resources	= ARRAY_SIZE(veu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU,
+	},
 };
 
 static struct uio_info jpu_platform_data = {
@@ -175,6 +197,9 @@ static struct platform_device jpu_device = {
 	},
 	.resource	= jpu_resources,
 	.num_resources	= ARRAY_SIZE(jpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_JPU,
+	},
 };
 
 static struct sh_timer_config cmt_platform_data = {
@@ -207,6 +232,9 @@ static struct platform_device cmt_device = {
 	},
 	.resource	= cmt_resources,
 	.num_resources	= ARRAY_SIZE(cmt_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_CMT,
+	},
 };
 
 static struct sh_timer_config tmu0_platform_data = {
@@ -238,6 +266,9 @@ static struct platform_device tmu0_device = {
 	},
 	.resource	= tmu0_resources,
 	.num_resources	= ARRAY_SIZE(tmu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU,
+	},
 };
 
 static struct sh_timer_config tmu1_platform_data = {
@@ -269,6 +300,9 @@ static struct platform_device tmu1_device = {
 	},
 	.resource	= tmu1_resources,
 	.num_resources	= ARRAY_SIZE(tmu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU,
+	},
 };
 
 static struct sh_timer_config tmu2_platform_data = {
@@ -299,6 +333,9 @@ static struct platform_device tmu2_device = {
 	},
 	.resource	= tmu2_resources,
 	.num_resources	= ARRAY_SIZE(tmu2_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU,
+	},
 };
 
 static struct plat_sci_port sci_platform_data[] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index b45dace9539f..4caa5a7ca86e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <cpu/sh7723.h>
 
 static struct uio_info vpu_platform_data = {
 	.name = "VPU5",
@@ -45,6 +46,9 @@ static struct platform_device vpu_device = {
 	},
 	.resource	= vpu_resources,
 	.num_resources	= ARRAY_SIZE(vpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VPU,
+	},
 };
 
 static struct uio_info veu0_platform_data = {
@@ -73,6 +77,9 @@ static struct platform_device veu0_device = {
 	},
 	.resource	= veu0_resources,
 	.num_resources	= ARRAY_SIZE(veu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU2H0,
+	},
 };
 
 static struct uio_info veu1_platform_data = {
@@ -101,6 +108,9 @@ static struct platform_device veu1_device = {
 	},
 	.resource	= veu1_resources,
 	.num_resources	= ARRAY_SIZE(veu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU2H1,
+	},
 };
 
 static struct sh_timer_config cmt_platform_data = {
@@ -133,6 +143,9 @@ static struct platform_device cmt_device = {
 	},
 	.resource	= cmt_resources,
 	.num_resources	= ARRAY_SIZE(cmt_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_CMT,
+	},
 };
 
 static struct sh_timer_config tmu0_platform_data = {
@@ -164,6 +177,9 @@ static struct platform_device tmu0_device = {
 	},
 	.resource	= tmu0_resources,
 	.num_resources	= ARRAY_SIZE(tmu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu1_platform_data = {
@@ -195,6 +211,9 @@ static struct platform_device tmu1_device = {
 	},
 	.resource	= tmu1_resources,
 	.num_resources	= ARRAY_SIZE(tmu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu2_platform_data = {
@@ -225,6 +244,9 @@ static struct platform_device tmu2_device = {
 	},
 	.resource	= tmu2_resources,
 	.num_resources	= ARRAY_SIZE(tmu2_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu3_platform_data = {
@@ -255,6 +277,9 @@ static struct platform_device tmu3_device = {
 	},
 	.resource	= tmu3_resources,
 	.num_resources	= ARRAY_SIZE(tmu3_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu4_platform_data = {
@@ -285,6 +310,9 @@ static struct platform_device tmu4_device = {
 	},
 	.resource	= tmu4_resources,
 	.num_resources	= ARRAY_SIZE(tmu4_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu5_platform_data = {
@@ -315,6 +343,9 @@ static struct platform_device tmu5_device = {
 	},
 	.resource	= tmu5_resources,
 	.num_resources	= ARRAY_SIZE(tmu5_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -395,10 +426,13 @@ static struct platform_device rtc_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(rtc_resources),
 	.resource	= rtc_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_RTC,
+	},
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource sh7723_usb_host_resources[] = {
@@ -424,6 +458,9 @@ static struct platform_device sh7723_usb_host_device = {
 	},
 	.num_resources	= ARRAY_SIZE(sh7723_usb_host_resources),
 	.resource	= sh7723_usb_host_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USB,
+	},
 };
 
 static struct resource iic_resources[] = {
@@ -445,6 +482,9 @@ static struct platform_device iic_device = {
 	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic_resources),
 	.resource       = iic_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC,
+	},
 };
 
 static struct platform_device *sh7723_devices[] __initdata = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index a04edaab9a29..f3851fd757ec 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <cpu/sh7724.h>
 
 /* Serial */
 static struct plat_sci_port sci_platform_data[] = {
@@ -103,6 +104,9 @@ static struct platform_device rtc_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(rtc_resources),
 	.resource	= rtc_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_RTC,
+	},
 };
 
 /* I2C0 */
@@ -125,6 +129,9 @@ static struct platform_device iic0_device = {
 	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic0_resources),
 	.resource       = iic0_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC0,
+	},
 };
 
 /* I2C1 */
@@ -147,6 +154,9 @@ static struct platform_device iic1_device = {
 	.id             = 1, /* "i2c1" clock */
 	.num_resources  = ARRAY_SIZE(iic1_resources),
 	.resource       = iic1_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC1,
+	},
 };
 
 /* VPU */
@@ -176,6 +186,9 @@ static struct platform_device vpu_device = {
 	},
 	.resource	= vpu_resources,
 	.num_resources	= ARRAY_SIZE(vpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VPU,
+	},
 };
 
 /* VEU0 */
@@ -205,6 +218,9 @@ static struct platform_device veu0_device = {
 	},
 	.resource	= veu0_resources,
 	.num_resources	= ARRAY_SIZE(veu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU0,
+	},
 };
 
 /* VEU1 */
@@ -234,6 +250,9 @@ static struct platform_device veu1_device = {
 	},
 	.resource	= veu1_resources,
 	.num_resources	= ARRAY_SIZE(veu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU1,
+	},
 };
 
 static struct sh_timer_config cmt_platform_data = {
@@ -266,6 +285,9 @@ static struct platform_device cmt_device = {
 	},
 	.resource	= cmt_resources,
 	.num_resources	= ARRAY_SIZE(cmt_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_CMT,
+	},
 };
 
 static struct sh_timer_config tmu0_platform_data = {
@@ -297,6 +319,9 @@ static struct platform_device tmu0_device = {
 	},
 	.resource	= tmu0_resources,
 	.num_resources	= ARRAY_SIZE(tmu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu1_platform_data = {
@@ -328,6 +353,9 @@ static struct platform_device tmu1_device = {
 	},
 	.resource	= tmu1_resources,
 	.num_resources	= ARRAY_SIZE(tmu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu2_platform_data = {
@@ -358,6 +386,9 @@ static struct platform_device tmu2_device = {
 	},
 	.resource	= tmu2_resources,
 	.num_resources	= ARRAY_SIZE(tmu2_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 
@@ -389,6 +420,9 @@ static struct platform_device tmu3_device = {
 	},
 	.resource	= tmu3_resources,
 	.num_resources	= ARRAY_SIZE(tmu3_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu4_platform_data = {
@@ -419,6 +453,9 @@ static struct platform_device tmu4_device = {
 	},
 	.resource	= tmu4_resources,
 	.num_resources	= ARRAY_SIZE(tmu4_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu5_platform_data = {
@@ -449,6 +486,9 @@ static struct platform_device tmu5_device = {
 	},
 	.resource	= tmu5_resources,
 	.num_resources	= ARRAY_SIZE(tmu5_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 /* JPU */
@@ -478,6 +518,9 @@ static struct platform_device jpu_device = {
 	},
 	.resource	= jpu_resources,
 	.num_resources	= ARRAY_SIZE(jpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_JPU,
+	},
 };
 
 static struct platform_device *sh7724_devices[] __initdata = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
new file mode 100644
index 000000000000..c470e15f2e03
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -0,0 +1,513 @@
+/*
+ * SH7757 Setup
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ *  based on setup-sh7785.c : Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/sh_timer.h>
+
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xfe430008,
+		.end	= 0xfe430013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xfe430014,
+		.end	= 0xfe43001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xfe4b0000,		/* SCIF2 */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 40, 40, 40 },
+	}, {
+		.mapbase	= 0xfe4c0000,		/* SCIF3 */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 76, 76, 76, 76 },
+	}, {
+		.mapbase	= 0xfe4d0000,		/* SCIF4 */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 104, 104, 104, 104 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7757_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&sci_device,
+};
+
+static int __init sh7757_devices_setup(void)
+{
+	return platform_add_devices(sh7757_devices,
+				    ARRAY_SIZE(sh7757_devices));
+}
+arch_initcall(sh7757_devices_setup);
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+
+	SDHI,
+	DVC,
+	IRQ8, IRQ9, IRQ10,
+	WDT0,
+	TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI,
+
+	ARC4,
+	DMAC0,
+	IRQ11,
+	SCIF2,
+	DMAC1_6,
+	USB0,
+	IRQ12,
+	JMC,
+	SPI1,
+	IRQ13, IRQ14,
+	USB1,
+	TMR01, TMR23, TMR45,
+	WDT1,
+	FRT,
+	LPC,
+	SCIF0, SCIF1, SCIF3,
+	PECI0I, PECI1I, PECI2I,
+	IRQ15,
+	ETHERC,
+	SPI0,
+	ADC1,
+	DMAC1_8,
+	SIM,
+	TMU3, TMU4, TMU5,
+	ADC0,
+	SCIF4,
+	IIC0_0, IIC0_1, IIC0_2, IIC0_3,
+	IIC1_0, IIC1_1, IIC1_2, IIC1_3,
+	IIC2_0, IIC2_1, IIC2_2, IIC2_3,
+	IIC3_0, IIC3_1, IIC3_2, IIC3_3,
+	IIC4_0, IIC4_1, IIC4_2, IIC4_3,
+	IIC5_0, IIC5_1, IIC5_2, IIC5_3,
+	IIC6_0, IIC6_1, IIC6_2, IIC6_3,
+	IIC7_0, IIC7_1, IIC7_2, IIC7_3,
+	IIC8_0, IIC8_1, IIC8_2, IIC8_3,
+	IIC9_0, IIC9_1, IIC9_2, IIC9_3,
+	PCIINTA,
+	PCIE,
+	SGPIO,
+
+	/* interrupt groups */
+
+	TMU012, TMU345,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(SDHI, 0x480), INTC_VECT(SDHI, 0x04a0),
+	INTC_VECT(SDHI, 0x4c0),
+	INTC_VECT(DVC, 0x4e0),
+	INTC_VECT(IRQ8, 0x500), INTC_VECT(IRQ9, 0x520),
+	INTC_VECT(IRQ10, 0x540),
+	INTC_VECT(WDT0, 0x560),
+	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
+	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(ARC4, 0x620),
+	INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
+	INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
+	INTC_VECT(DMAC0, 0x6c0),
+	INTC_VECT(IRQ11, 0x6e0),
+	INTC_VECT(SCIF2, 0x700), INTC_VECT(SCIF2, 0x720),
+	INTC_VECT(SCIF2, 0x740), INTC_VECT(SCIF2, 0x760),
+	INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
+	INTC_VECT(DMAC1_6, 0x7c0), INTC_VECT(DMAC1_6, 0x7e0),
+	INTC_VECT(USB0, 0x840),
+	INTC_VECT(IRQ12, 0x880),
+	INTC_VECT(JMC, 0x8a0),
+	INTC_VECT(SPI1, 0x8c0),
+	INTC_VECT(IRQ13, 0x8e0), INTC_VECT(IRQ14, 0x900),
+	INTC_VECT(USB1, 0x920),
+	INTC_VECT(TMR01, 0xa00), INTC_VECT(TMR23, 0xa20),
+	INTC_VECT(TMR45, 0xa40),
+	INTC_VECT(WDT1, 0xa60),
+	INTC_VECT(FRT, 0xa80),
+	INTC_VECT(LPC, 0xaa0), INTC_VECT(LPC, 0xac0),
+	INTC_VECT(LPC, 0xae0), INTC_VECT(LPC, 0xb00),
+	INTC_VECT(LPC, 0xb20),
+	INTC_VECT(SCIF0, 0xb40), INTC_VECT(SCIF1, 0xb60),
+	INTC_VECT(SCIF3, 0xb80), INTC_VECT(SCIF3, 0xba0),
+	INTC_VECT(SCIF3, 0xbc0), INTC_VECT(SCIF3, 0xbe0),
+	INTC_VECT(PECI0I, 0xc00), INTC_VECT(PECI1I, 0xc20),
+	INTC_VECT(PECI2I, 0xc40),
+	INTC_VECT(IRQ15, 0xc60),
+	INTC_VECT(ETHERC, 0xc80), INTC_VECT(ETHERC, 0xca0),
+	INTC_VECT(SPI0, 0xcc0),
+	INTC_VECT(ADC1, 0xce0),
+	INTC_VECT(DMAC1_8, 0xd00), INTC_VECT(DMAC1_8, 0xd20),
+	INTC_VECT(DMAC1_8, 0xd40), INTC_VECT(DMAC1_8, 0xd60),
+	INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
+	INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40),
+	INTC_VECT(ADC0, 0xe60),
+	INTC_VECT(SCIF4, 0xf00), INTC_VECT(SCIF4, 0xf20),
+	INTC_VECT(SCIF4, 0xf40), INTC_VECT(SCIF4, 0xf60),
+	INTC_VECT(IIC0_0, 0x1400), INTC_VECT(IIC0_1, 0x1420),
+	INTC_VECT(IIC0_2, 0x1440), INTC_VECT(IIC0_3, 0x1460),
+	INTC_VECT(IIC1_0, 0x1480), INTC_VECT(IIC1_1, 0x14e0),
+	INTC_VECT(IIC1_2, 0x1500), INTC_VECT(IIC1_3, 0x1520),
+	INTC_VECT(IIC2_0, 0x1540), INTC_VECT(IIC2_1, 0x1560),
+	INTC_VECT(IIC2_2, 0x1580), INTC_VECT(IIC2_3, 0x1600),
+	INTC_VECT(IIC3_0, 0x1620), INTC_VECT(IIC3_1, 0x1640),
+	INTC_VECT(IIC3_2, 0x16e0), INTC_VECT(IIC3_3, 0x1700),
+	INTC_VECT(IIC4_0, 0x17c0), INTC_VECT(IIC4_1, 0x1800),
+	INTC_VECT(IIC4_2, 0x1820), INTC_VECT(IIC4_3, 0x1840),
+	INTC_VECT(IIC5_0, 0x1860), INTC_VECT(IIC5_1, 0x1880),
+	INTC_VECT(IIC5_2, 0x18a0), INTC_VECT(IIC5_3, 0x18c0),
+	INTC_VECT(IIC6_0, 0x18e0), INTC_VECT(IIC6_1, 0x1900),
+	INTC_VECT(IIC6_2, 0x1920), INTC_VECT(IIC6_3, 0x1980),
+	INTC_VECT(IIC7_0, 0x19a0), INTC_VECT(IIC7_1, 0x1a00),
+	INTC_VECT(IIC7_2, 0x1a20), INTC_VECT(IIC7_3, 0x1a40),
+	INTC_VECT(IIC8_0, 0x1a60), INTC_VECT(IIC8_1, 0x1a80),
+	INTC_VECT(IIC8_2, 0x1aa0), INTC_VECT(IIC8_3, 0x1b40),
+	INTC_VECT(IIC9_0, 0x1b60), INTC_VECT(IIC9_1, 0x1b80),
+	INTC_VECT(IIC9_2, 0x1c00), INTC_VECT(IIC9_3, 0x1c20),
+	INTC_VECT(PCIINTA, 0x1ce0),
+	INTC_VECT(PCIE, 0x1e00),
+	INTC_VECT(SGPIO, 0x1f80),
+	INTC_VECT(SGPIO, 0x1fa0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	    IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	    IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+	    IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	    IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	    IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, DMAC1_8, 0, PECI0I, LPC, FRT, WDT1, TMR45,
+	    TMR23, TMR01, 0, 0, 0, 0, 0, DMAC0,
+	    HUDI, 0, WDT0, SCIF3, SCIF2, SDHI, TMU345, TMU012
+	     } },
+
+	{ 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
+	  { IRQ15, IRQ14, IRQ13, IRQ12, IRQ11, IRQ10, SCIF4, ETHERC,
+	    IRQ9, IRQ8, SCIF1, SCIF0, USB0, 0, 0, USB1,
+	    ADC1, 0, DMAC1_6, ADC0, SPI0, SIM, PECI2I, PECI1I,
+	    ARC4, 0, SPI1, JMC, 0, 0, 0, DVC
+	     } },
+
+	{ 0xffd10038, 0xffd1003c, 32, /* INT2MSKR2 / INT2MSKCR2 */
+	  { IIC4_1, IIC4_2, IIC5_0, 0, 0, 0, SGPIO, 0,
+	    0, 0, 0, IIC9_2, IIC8_2, IIC8_1, IIC8_0, IIC7_3,
+	    IIC7_2, IIC7_1, IIC6_3, IIC0_0, IIC0_1, IIC0_2, IIC0_3, IIC3_1,
+	    IIC2_3, 0, IIC2_1, IIC9_1, IIC3_3, IIC1_0, PCIE, IIC2_2
+	     } },
+
+	{ 0xffd100d0, 0xff1400d4, 32, /* INT2MSKR3 / INT2MSKCR4 */
+	  { 0, IIC6_1, IIC6_0, IIC5_1, IIC3_2, IIC2_0, 0, 0,
+	    IIC1_3, IIC1_2, IIC9_0, IIC8_3, IIC4_3, IIC7_0, 0, IIC6_2,
+	    PCIINTA, 0, IIC4_0, 0, 0, 0, 0, IIC9_3,
+	    IIC3_0, 0, IIC5_3, IIC5_2, 0, 0, 0, IIC1_1
+	     } },
+};
+
+#define INTPRI		0xffd00010
+#define INT2PRI0	0xffd40000
+#define INT2PRI1	0xffd40004
+#define INT2PRI2	0xffd40008
+#define INT2PRI3	0xffd4000c
+#define INT2PRI4	0xffd40010
+#define INT2PRI5	0xffd40014
+#define INT2PRI6	0xffd40018
+#define INT2PRI7	0xffd4001c
+#define INT2PRI8	0xffd400a0
+#define INT2PRI9	0xffd400a4
+#define INT2PRI10	0xffd400a8
+#define INT2PRI11	0xffd400ac
+#define INT2PRI12	0xffd400b0
+#define INT2PRI13	0xffd400b4
+#define INT2PRI14	0xffd400b8
+#define INT2PRI15	0xffd400bc
+#define INT2PRI16	0xffd10000
+#define INT2PRI17	0xffd10004
+#define INT2PRI18	0xffd10008
+#define INT2PRI19	0xffd1000c
+#define INT2PRI20	0xffd10010
+#define INT2PRI21	0xffd10014
+#define INT2PRI22	0xffd10018
+#define INT2PRI23	0xffd1001c
+#define INT2PRI24	0xffd100a0
+#define INT2PRI25	0xffd100a4
+#define INT2PRI26	0xffd100a8
+#define INT2PRI27	0xffd100ac
+#define INT2PRI28	0xffd100b0
+#define INT2PRI29	0xffd100b4
+#define INT2PRI30	0xffd100b8
+#define INT2PRI31	0xffd100bc
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ INTPRI, 0, 32, 4, { IRQ0, IRQ1, IRQ2, IRQ3,
+			      IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ INT2PRI0, 0, 32, 8, { TMU0, TMU1, TMU2, TMU2_TICPI } },
+	{ INT2PRI1, 0, 32, 8, { TMU3, TMU4, TMU5, SDHI } },
+	{ INT2PRI2, 0, 32, 8, { SCIF2, SCIF3, WDT0, IRQ8 } },
+	{ INT2PRI3, 0, 32, 8, { HUDI, DMAC0, ADC0, IRQ9 } },
+	{ INT2PRI4, 0, 32, 8, { IRQ10, 0, TMR01, TMR23 } },
+	{ INT2PRI5, 0, 32, 8, { TMR45, WDT1, FRT, LPC } },
+	{ INT2PRI6, 0, 32, 8, { PECI0I, ETHERC, DMAC1_8, 0 } },
+	{ INT2PRI7, 0, 32, 8, { SCIF4, 0, IRQ11, IRQ12 } },
+	{ INT2PRI8, 0, 32, 8, { 0, 0, 0, DVC } },
+	{ INT2PRI9, 0, 32, 8, { ARC4, 0, SPI1, JMC } },
+	{ INT2PRI10, 0, 32, 8, { SPI0, SIM, PECI2I, PECI1I } },
+	{ INT2PRI11, 0, 32, 8, { ADC1, IRQ13, DMAC1_6, IRQ14 } },
+	{ INT2PRI12, 0, 32, 8, { USB0, 0, IRQ15, USB1 } },
+	{ INT2PRI13, 0, 32, 8, { 0, 0, SCIF1, SCIF0 } },
+
+	{ INT2PRI16, 0, 32, 8, { IIC2_2, 0, 0, 0 } },
+	{ INT2PRI17, 0, 32, 8, { PCIE, 0, 0, IIC1_0 } },
+	{ INT2PRI18, 0, 32, 8, { IIC3_3, IIC9_1, IIC2_1, IIC1_2 } },
+	{ INT2PRI19, 0, 32, 8, { IIC2_3, IIC3_1, 0, IIC1_3 } },
+	{ INT2PRI20, 0, 32, 8, { IIC2_0, IIC6_3, IIC7_1, IIC7_2 } },
+	{ INT2PRI21, 0, 32, 8, { IIC7_3, IIC8_0, IIC8_1, IIC8_2 } },
+	{ INT2PRI22, 0, 32, 8, { IIC9_2, 0, 0, 0 } },
+	{ INT2PRI23, 0, 32, 8, { 0, SGPIO, IIC3_2, IIC5_1 } },
+	{ INT2PRI24, 0, 32, 8, { 0, 0, 0, IIC1_1 } },
+	{ INT2PRI25, 0, 32, 8, { IIC3_0, 0, IIC5_3, IIC5_2 } },
+	{ INT2PRI26, 0, 32, 8, { 0, 0, 0, IIC9_3 } },
+	{ INT2PRI27, 0, 32, 8, { PCIINTA, IIC6_0, IIC4_0, IIC6_1 } },
+	{ INT2PRI28, 0, 32, 8, { IIC4_3, IIC7_0, 0, IIC6_2 } },
+	{ INT2PRI29, 0, 32, 8, { 0, 0, IIC9_0, IIC8_3 } },
+	{ INT2PRI30, 0, 32, 8, { IIC4_1, IIC4_2, IIC5_0, 0 } },
+	{ INT2PRI31, 0, 32, 8, { IIC0_0, IIC0_1, IIC0_2, IIC0_3 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7757-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7757-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect vectors_irl0123[] __initdata = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+	INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
+	INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
+	INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
+	INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
+	INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
+	INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
+	INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
+	INTC_VECT(IRL4_HHHL, 0xcc0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,
+			 NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
+			 NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ3-0 + IRQ7-4 */
+	ctrl_outl(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	ctrl_outl(0xc0000000, INTC_INTMSK1);
+	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode" */
+	ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ7654:
+		/* select IRQ mode for IRL7-4 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq4567);
+		break;
+	case IRQ_MODE_IRQ3210:
+		/* select IRQ mode for IRL3-0 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq0123);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl4567);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl0123);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 07f078961c71..e848443deeb9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -268,11 +268,7 @@ enum {
 	UNUSED = 0,
 
 	/* interrupt sources */
-	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
-	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
-	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
-	IRL_HHLL, IRL_HHLH, IRL_HHHL,
-	IRQ0, IRQ1, IRQ2, IRQ3,
+	IRL, IRQ0, IRQ1, IRQ2, IRQ3,
 	HUDII,
 	TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
 	PCII0, PCII1, PCII2, PCII3, PCII4,
@@ -287,10 +283,7 @@ enum {
 	DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
 	DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
 	IIC, VIN0, VIN1, VCORE0, ATAPI,
-	DTU0_TEND, DTU0_AE, DTU0_TMISS,
-	DTU1_TEND, DTU1_AE, DTU1_TMISS,
-	DTU2_TEND, DTU2_AE, DTU2_TMISS,
-	DTU3_TEND, DTU3_AE, DTU3_TMISS,
+	DTU0, DTU1, DTU2, DTU3,
 	FE0, FE1,
 	GPIO0, GPIO1, GPIO2, GPIO3,
 	PAM, IRM,
@@ -298,8 +291,8 @@ enum {
 	INTICI4, INTICI5, INTICI6, INTICI7,
 
 	/* interrupt groups */
-	IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
-	DMAC0, DMAC1, DTU0, DTU1, DTU2, DTU3,
+	PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
+	DMAC0, DMAC1,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -332,14 +325,14 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(IIC, 0xae0),
 	INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20),
 	INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60),
-	INTC_VECT(DTU0_TEND, 0xc00), INTC_VECT(DTU0_AE, 0xc20),
-	INTC_VECT(DTU0_TMISS, 0xc40),
-	INTC_VECT(DTU1_TEND, 0xc60), INTC_VECT(DTU1_AE, 0xc80),
-	INTC_VECT(DTU1_TMISS, 0xca0),
-	INTC_VECT(DTU2_TEND, 0xcc0), INTC_VECT(DTU2_AE, 0xce0),
-	INTC_VECT(DTU2_TMISS, 0xd00),
-	INTC_VECT(DTU3_TEND, 0xd20), INTC_VECT(DTU3_AE, 0xd40),
-	INTC_VECT(DTU3_TMISS, 0xd60),
+	INTC_VECT(DTU0, 0xc00), INTC_VECT(DTU0, 0xc20),
+	INTC_VECT(DTU0, 0xc40),
+	INTC_VECT(DTU1, 0xc60), INTC_VECT(DTU1, 0xc80),
+	INTC_VECT(DTU1, 0xca0),
+	INTC_VECT(DTU2, 0xcc0), INTC_VECT(DTU2, 0xce0),
+	INTC_VECT(DTU2, 0xd00),
+	INTC_VECT(DTU3, 0xd20), INTC_VECT(DTU3, 0xd40),
+	INTC_VECT(DTU3, 0xd60),
 	INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20),
 	INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
 	INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
@@ -351,10 +344,6 @@ static struct intc_vect vectors[] __initdata = {
 };
 
 static struct intc_group groups[] __initdata = {
-	INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
-		   IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
-		   IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
-		   IRL_HHLL, IRL_HHLH, IRL_HHHL),
 	INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
 	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
 	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
@@ -364,10 +353,6 @@ static struct intc_group groups[] __initdata = {
 		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
 	INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
 		   DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
-	INTC_GROUP(DTU0, DTU0_TEND, DTU0_AE, DTU0_TMISS),
-	INTC_GROUP(DTU1, DTU1_TEND, DTU1_AE, DTU1_TMISS),
-	INTC_GROUP(DTU2, DTU2_TEND, DTU2_AE, DTU2_TMISS),
-	INTC_GROUP(DTU3, DTU3_TEND, DTU3_AE, DTU3_TMISS),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
@@ -434,14 +419,14 @@ static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
 
 /* External interrupt pins in IRL mode */
 static struct intc_vect vectors_irl[] __initdata = {
-	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
-	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
-	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
-	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
-	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
-	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
-	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
-	INTC_VECT(IRL_HHHL, 0x3c0),
+	INTC_VECT(IRL, 0x200), INTC_VECT(IRL, 0x220),
+	INTC_VECT(IRL, 0x240), INTC_VECT(IRL, 0x260),
+	INTC_VECT(IRL, 0x280), INTC_VECT(IRL, 0x2a0),
+	INTC_VECT(IRL, 0x2c0), INTC_VECT(IRL, 0x2e0),
+	INTC_VECT(IRL, 0x300), INTC_VECT(IRL, 0x320),
+	INTC_VECT(IRL, 0x340), INTC_VECT(IRL, 0x360),
+	INTC_VECT(IRL, 0x380), INTC_VECT(IRL, 0x3a0),
+	INTC_VECT(IRL, 0x3c0),
 };
 
 static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 2b6b0d50c576..185ec3976a25 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -57,6 +57,8 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
+	local_timer_setup(0);
+
 	BUILD_BUG_ON(SMP_MSG_NR >= 8);
 
 	for (i = 0; i < SMP_MSG_NR; i++)
diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c
index 92ad844b5c12..521d05b3f7ba 100644
--- a/arch/sh/kernel/cpu/sh5/probe.c
+++ b/arch/sh/kernel/cpu/sh5/probe.c
@@ -34,6 +34,8 @@ int __init detect_cpu_and_cache_system(void)
 		/* CPU.VCR aliased at CIR address on SH5-101 */
 		boot_cpu_data.type = CPU_SH5_101;
 
+	boot_cpu_data.family = CPU_FAMILY_SH5;
+
 	/*
 	 * First, setup some sane values for the I-cache.
 	 */
diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
index 08bfa7c7db29..a39f88ea1a85 100644
--- a/arch/sh/kernel/cpu/shmobile/Makefile
+++ b/arch/sh/kernel/cpu/shmobile/Makefile
@@ -4,3 +4,5 @@
 
 # Power Management & Sleep mode
 obj-$(CONFIG_PM)	+= pm.o sleep.o
+obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
+obj-$(CONFIG_PM_RUNTIME)	+= pm_runtime.o
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
new file mode 100644
index 000000000000..1c504bd972c3
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -0,0 +1,113 @@
+/*
+ * arch/sh/kernel/cpu/shmobile/cpuidle.c
+ *
+ * Cpuidle support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <linux/cpuidle.h>
+#include <asm/suspend.h>
+#include <asm/uaccess.h>
+#include <asm/hwblk.h>
+
+static unsigned long cpuidle_mode[] = {
+	SUSP_SH_SLEEP, /* regular sleep mode */
+	SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
+	SUSP_SH_STANDBY | SUSP_SH_SF, /* software standby mode + self refresh */
+};
+
+static int cpuidle_sleep_enter(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	unsigned long allowed_mode = arch_hwblk_sleep_mode();
+	ktime_t before, after;
+	int requested_state = state - &dev->states[0];
+	int allowed_state;
+	int k;
+
+	/* convert allowed mode to allowed state */
+	for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--)
+		if (cpuidle_mode[k] == allowed_mode)
+			break;
+
+	allowed_state = k;
+
+	/* take the following into account for sleep mode selection:
+	 * - allowed_state: best mode allowed by hardware (clock deps)
+	 * - requested_state: best mode allowed by software (latencies)
+	 */
+	k = min_t(int, allowed_state, requested_state);
+
+	dev->last_state = &dev->states[k];
+	before = ktime_get();
+	sh_mobile_call_standby(cpuidle_mode[k]);
+	after = ktime_get();
+	return ktime_to_ns(ktime_sub(after, before)) >> 10;
+}
+
+static struct cpuidle_device cpuidle_dev;
+static struct cpuidle_driver cpuidle_driver = {
+	.name =		"sh_idle",
+	.owner =	THIS_MODULE,
+};
+
+void sh_mobile_setup_cpuidle(void)
+{
+	struct cpuidle_device *dev = &cpuidle_dev;
+	struct cpuidle_state *state;
+	int i;
+
+	cpuidle_register_driver(&cpuidle_driver);
+
+	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
+		dev->states[i].name[0] = '\0';
+		dev->states[i].desc[0] = '\0';
+	}
+
+	i = CPUIDLE_DRIVER_STATE_START;
+
+	state = &dev->states[i++];
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
+	strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN);
+	state->exit_latency = 1;
+	state->target_residency = 1 * 2;
+	state->power_usage = 3;
+	state->flags = 0;
+	state->flags |= CPUIDLE_FLAG_SHALLOW;
+	state->flags |= CPUIDLE_FLAG_TIME_VALID;
+	state->enter = cpuidle_sleep_enter;
+
+	dev->safe_state = state;
+
+	state = &dev->states[i++];
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
+	strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN);
+	state->exit_latency = 100;
+	state->target_residency = 1 * 2;
+	state->power_usage = 1;
+	state->flags = 0;
+	state->flags |= CPUIDLE_FLAG_TIME_VALID;
+	state->enter = cpuidle_sleep_enter;
+
+	state = &dev->states[i++];
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
+	strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", CPUIDLE_DESC_LEN);
+	state->exit_latency = 2300;
+	state->target_residency = 1 * 2;
+	state->power_usage = 1;
+	state->flags = 0;
+	state->flags |= CPUIDLE_FLAG_TIME_VALID;
+	state->enter = cpuidle_sleep_enter;
+
+	dev->state_count = i;
+
+	cpuidle_register_device(dev);
+}
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index 8c067adf6830..ee3c2aaf66fb 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
+ * arch/sh/kernel/cpu/shmobile/pm.c
  *
  * Power management support code for SuperH Mobile
  *
@@ -32,40 +32,20 @@
  *
  * R-standby mode is unsupported, but will be added in the future
  * U-standby mode is low priority since it needs bootloader hacks
- *
- * All modes should be tied in with cpuidle. But before that can
- * happen we need to keep track of enabled hardware blocks so we
- * can avoid entering sleep modes that stop clocks to hardware
- * blocks that are in use even though the cpu core is idle.
  */
 
+#define ILRAM_BASE 0xe5200000
+
 extern const unsigned char sh_mobile_standby[];
 extern const unsigned int sh_mobile_standby_size;
 
-static void sh_mobile_call_standby(unsigned long mode)
+void sh_mobile_call_standby(unsigned long mode)
 {
-	extern void *vbr_base;
-	void *onchip_mem = (void *)0xe5200000; /* ILRAM */
-	void (*standby_onchip_mem)(unsigned long) = onchip_mem;
-
-	/* Note: Wake up from sleep may generate exceptions!
-	 * Setup VBR to point to on-chip ram if self-refresh is
-	 * going to be used.
-	 */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
-
-	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
-	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
-	wmb();
-	ctrl_barrier();
+	void *onchip_mem = (void *)ILRAM_BASE;
+	void (*standby_onchip_mem)(unsigned long, unsigned long) = onchip_mem;
 
 	/* Let assembly snippet in on-chip memory handle the rest */
-	standby_onchip_mem(mode);
-
-	/* Put VBR back in System RAM again */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+	standby_onchip_mem(mode, ILRAM_BASE);
 }
 
 static int sh_pm_enter(suspend_state_t state)
@@ -85,7 +65,15 @@ static struct platform_suspend_ops sh_pm_ops = {
 
 static int __init sh_pm_init(void)
 {
+	void *onchip_mem = (void *)ILRAM_BASE;
+
+	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
+	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
+	wmb();
+	ctrl_barrier();
+
 	suspend_set_ops(&sh_pm_ops);
+	sh_mobile_setup_cpuidle();
 	return 0;
 }
 
diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
new file mode 100644
index 000000000000..7c615b17e209
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -0,0 +1,303 @@
+/*
+ * arch/sh/kernel/cpu/shmobile/pm_runtime.c
+ *
+ * Runtime PM support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <asm/hwblk.h>
+
+static DEFINE_SPINLOCK(hwblk_lock);
+static LIST_HEAD(hwblk_idle_list);
+static struct work_struct hwblk_work;
+
+extern struct hwblk_info *hwblk_info;
+
+static void platform_pm_runtime_not_idle(struct platform_device *pdev)
+{
+	unsigned long flags;
+
+	/* remove device from idle list */
+	spin_lock_irqsave(&hwblk_lock, flags);
+	if (test_bit(PDEV_ARCHDATA_FLAG_IDLE, &pdev->archdata.flags)) {
+		list_del(&pdev->archdata.entry);
+		__clear_bit(PDEV_ARCHDATA_FLAG_IDLE, &pdev->archdata.flags);
+	}
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+static int __platform_pm_runtime_resume(struct platform_device *pdev)
+{
+	struct device *d = &pdev->dev;
+	struct pdev_archdata *ad = &pdev->archdata;
+	int hwblk = ad->hwblk_id;
+	int ret = -ENOSYS;
+
+	dev_dbg(d, "__platform_pm_runtime_resume() [%d]\n", hwblk);
+
+	if (d->driver && d->driver->pm && d->driver->pm->runtime_resume) {
+		hwblk_enable(hwblk_info, hwblk);
+		ret = 0;
+
+		if (test_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags)) {
+			ret = d->driver->pm->runtime_resume(d);
+			if (!ret)
+				clear_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
+			else
+				hwblk_disable(hwblk_info, hwblk);
+		}
+	}
+
+	dev_dbg(d, "__platform_pm_runtime_resume() [%d] - returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+static int __platform_pm_runtime_suspend(struct platform_device *pdev)
+{
+	struct device *d = &pdev->dev;
+	struct pdev_archdata *ad = &pdev->archdata;
+	int hwblk = ad->hwblk_id;
+	int ret = -ENOSYS;
+
+	dev_dbg(d, "__platform_pm_runtime_suspend() [%d]\n", hwblk);
+
+	if (d->driver && d->driver->pm && d->driver->pm->runtime_suspend) {
+		BUG_ON(!test_bit(PDEV_ARCHDATA_FLAG_IDLE, &ad->flags));
+
+		hwblk_enable(hwblk_info, hwblk);
+		ret = d->driver->pm->runtime_suspend(d);
+		hwblk_disable(hwblk_info, hwblk);
+
+		if (!ret) {
+			set_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
+			platform_pm_runtime_not_idle(pdev);
+			hwblk_cnt_dec(hwblk_info, hwblk, HWBLK_CNT_IDLE);
+		}
+	}
+
+	dev_dbg(d, "__platform_pm_runtime_suspend() [%d] - returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+static void platform_pm_runtime_work(struct work_struct *work)
+{
+	struct platform_device *pdev;
+	unsigned long flags;
+	int ret;
+
+	/* go through the idle list and suspend one device at a time */
+	do {
+		spin_lock_irqsave(&hwblk_lock, flags);
+		if (list_empty(&hwblk_idle_list))
+			pdev = NULL;
+		else
+			pdev = list_first_entry(&hwblk_idle_list,
+						struct platform_device,
+						archdata.entry);
+		spin_unlock_irqrestore(&hwblk_lock, flags);
+
+		if (pdev) {
+			mutex_lock(&pdev->archdata.mutex);
+			ret = __platform_pm_runtime_suspend(pdev);
+
+			/* at this point the platform device may be:
+			 * suspended: ret = 0, FLAG_SUSP set, clock stopped
+			 * failed: ret < 0, FLAG_IDLE set, clock stopped
+			 */
+			mutex_unlock(&pdev->archdata.mutex);
+		} else {
+			ret = -ENODEV;
+		}
+	} while (!ret);
+}
+
+/* this function gets called from cpuidle context when all devices in the
+ * main power domain are unused but some are counted as idle, ie the hwblk
+ * counter values are (HWBLK_CNT_USAGE == 0) && (HWBLK_CNT_IDLE != 0)
+ */
+void platform_pm_runtime_suspend_idle(void)
+{
+	queue_work(pm_wq, &hwblk_work);
+}
+
+int platform_pm_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pdev_archdata *ad = &pdev->archdata;
+	unsigned long flags;
+	int hwblk = ad->hwblk_id;
+	int ret = 0;
+
+	dev_dbg(dev, "platform_pm_runtime_suspend() [%d]\n", hwblk);
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		goto out;
+
+	/* interrupt context not allowed */
+	might_sleep();
+
+	/* catch misconfigured drivers not starting with resume */
+	if (test_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* serialize */
+	mutex_lock(&ad->mutex);
+
+	/* disable clock */
+	hwblk_disable(hwblk_info, hwblk);
+
+	/* put device on idle list */
+	spin_lock_irqsave(&hwblk_lock, flags);
+	list_add_tail(&pdev->archdata.entry, &hwblk_idle_list);
+	__set_bit(PDEV_ARCHDATA_FLAG_IDLE, &pdev->archdata.flags);
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+
+	/* increase idle count */
+	hwblk_cnt_inc(hwblk_info, hwblk, HWBLK_CNT_IDLE);
+
+	/* at this point the platform device is:
+	 * idle: ret = 0, FLAG_IDLE set, clock stopped
+	 */
+	mutex_unlock(&ad->mutex);
+
+out:
+	dev_dbg(dev, "platform_pm_runtime_suspend() [%d] returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+int platform_pm_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pdev_archdata *ad = &pdev->archdata;
+	int hwblk = ad->hwblk_id;
+	int ret = 0;
+
+	dev_dbg(dev, "platform_pm_runtime_resume() [%d]\n", hwblk);
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		goto out;
+
+	/* interrupt context not allowed */
+	might_sleep();
+
+	/* serialize */
+	mutex_lock(&ad->mutex);
+
+	/* make sure device is removed from idle list */
+	platform_pm_runtime_not_idle(pdev);
+
+	/* decrease idle count */
+	if (!test_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags) &&
+	    !test_bit(PDEV_ARCHDATA_FLAG_SUSP, &pdev->archdata.flags))
+		hwblk_cnt_dec(hwblk_info, hwblk, HWBLK_CNT_IDLE);
+
+	/* resume the device if needed */
+	ret = __platform_pm_runtime_resume(pdev);
+
+	/* the driver has been initialized now, so clear the init flag */
+	clear_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+
+	/* at this point the platform device may be:
+	 * resumed: ret = 0, flags = 0, clock started
+	 * failed: ret < 0, FLAG_SUSP set, clock stopped
+	 */
+	mutex_unlock(&ad->mutex);
+out:
+	dev_dbg(dev, "platform_pm_runtime_resume() [%d] returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+int platform_pm_runtime_idle(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int hwblk = pdev->archdata.hwblk_id;
+	int ret = 0;
+
+	dev_dbg(dev, "platform_pm_runtime_idle() [%d]\n", hwblk);
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		goto out;
+
+	/* interrupt context not allowed, use pm_runtime_put()! */
+	might_sleep();
+
+	/* suspend synchronously to disable clocks immediately */
+	ret = pm_runtime_suspend(dev);
+out:
+	dev_dbg(dev, "platform_pm_runtime_idle() [%d] done!\n", hwblk);
+	return ret;
+}
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct platform_device *pdev = to_platform_device(dev);
+	int hwblk = pdev->archdata.hwblk_id;
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		return 0;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		INIT_LIST_HEAD(&pdev->archdata.entry);
+		mutex_init(&pdev->archdata.mutex);
+		/* platform devices without drivers should be disabled */
+		hwblk_enable(hwblk_info, hwblk);
+		hwblk_disable(hwblk_info, hwblk);
+		/* make sure driver re-inits itself once */
+		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+		break;
+	/* TODO: add BUS_NOTIFY_BIND_DRIVER and increase idle count */
+	case BUS_NOTIFY_BOUND_DRIVER:
+		/* keep track of number of devices in use per hwblk */
+		hwblk_cnt_inc(hwblk_info, hwblk, HWBLK_CNT_DEVICES);
+		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		/* keep track of number of devices in use per hwblk */
+		hwblk_cnt_dec(hwblk_info, hwblk, HWBLK_CNT_DEVICES);
+		/* make sure driver re-inits itself once */
+		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		break;
+	}
+	return 0;
+}
+
+static struct notifier_block platform_bus_notifier = {
+	.notifier_call = platform_bus_notify
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+	INIT_WORK(&hwblk_work, platform_pm_runtime_work);
+
+	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	return 0;
+}
+core_initcall(sh_pm_runtime_init);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index baf2d7d46b05..a439e6c7824f 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -16,19 +16,52 @@
 #include <asm/asm-offsets.h>
 #include <asm/suspend.h>
 
+/*
+ * Kernel mode register usage, see entry.S:
+ *	k0	scratch
+ *	k1	scratch
+ *	k4	scratch
+ */
+#define k0	r0
+#define k1	r1
+#define k4	r4
+
 /* manage self-refresh and enter standby mode.
  * this code will be copied to on-chip memory and executed from there.
  */
 
 	.balign 	4096,0,4096
 ENTRY(sh_mobile_standby)
+
+	/* save original vbr */
+	stc	vbr, r1
+	mova	saved_vbr, r0
+	mov.l	r1, @r0
+
+	/* point vbr to our on-chip memory page */
+	ldc	r5, vbr
+
+	/* save return address */
+	mova	saved_spc, r0
+	sts	pr, r5
+	mov.l	r5, @r0
+
+	/* save sr */
+	mova	saved_sr, r0
+	stc	sr, r5
+	mov.l	r5, @r0
+
+	/* save mode flags */
+	mova	saved_mode, r0
+	mov.l	r4, @r0
+
+	/* put mode flags in r0 */
 	mov	r4, r0
 
 	tst	#SUSP_SH_SF, r0
 	bt	skip_set_sf
 #ifdef CONFIG_CPU_SUBTYPE_SH7724
 	/* DBSC: put memory in self-refresh mode */
-
 	mov.l	dben_reg, r4
 	mov.l	dben_data0, r1
 	mov.l	r1, @r4
@@ -60,14 +93,6 @@ ENTRY(sh_mobile_standby)
 #endif
 
 skip_set_sf:
-	tst	#SUSP_SH_SLEEP, r0
-	bt	test_standby
-
-	/* set mode to "sleep mode" */
-	bra	do_sleep
-	 mov	#0x00, r1
-
-test_standby:
 	tst	#SUSP_SH_STANDBY, r0
 	bt	test_rstandby
 
@@ -85,77 +110,107 @@ test_rstandby:
 
 test_ustandby:
 	tst	#SUSP_SH_USTANDBY, r0
-	bt	done_sleep
+	bt	force_sleep
 
 	/* set mode to "u-standby mode" */
-	mov	#0x10, r1
+	bra	do_sleep
+	 mov	#0x10, r1
 
-	/* fall-through */
+force_sleep:
+
+	/* set mode to "sleep mode" */
+	mov	#0x00, r1
 
 do_sleep:
 	/* setup and enter selected standby mode */
 	mov.l	5f, r4
 	mov.l	r1, @r4
+again:
 	sleep
+	bra	again
+	 nop
+
+restore_jump_vbr:
+	/* setup spc with return address to c code */
+	mov.l	saved_spc, k0
+	ldc	k0, spc
+
+	/* restore vbr */
+	mov.l	saved_vbr, k0
+	ldc	k0, vbr
+
+	/* setup ssr with saved sr */
+	mov.l	saved_sr, k0
+	ldc	k0, ssr
+
+	/* get mode flags */
+	mov.l	saved_mode, k0
 
 done_sleep:
 	/* reset standby mode to sleep mode */
-	mov.l	5f, r4
-	mov	#0x00, r1
-	mov.l	r1, @r4
+	mov.l	5f, k4
+	mov	#0x00, k1
+	mov.l	k1, @k4
 
-	tst	#SUSP_SH_SF, r0
+	tst	#SUSP_SH_SF, k0
 	bt	skip_restore_sf
 
 #ifdef CONFIG_CPU_SUBTYPE_SH7724
 	/* DBSC: put memory in auto-refresh mode */
+	mov.l	dbrfpdn0_reg, k4
+	mov.l	dbrfpdn0_data0, k1
+	mov.l	k1, @k4
 
-	mov.l	dbrfpdn0_reg, r4
-	mov.l	dbrfpdn0_data0, r1
-	mov.l	r1, @r4
-
-	/* sleep 140 ns */
-	nop
+	nop /* sleep 140 ns */
 	nop
 	nop
 	nop
 
-	mov.l	dbcmdcnt_reg, r4
-	mov.l	dbcmdcnt_data0, r1
-	mov.l	r1, @r4
+	mov.l	dbcmdcnt_reg, k4
+	mov.l	dbcmdcnt_data0, k1
+	mov.l	k1, @k4
 
-	mov.l	dbcmdcnt_reg, r4
-	mov.l	dbcmdcnt_data1, r1
-	mov.l	r1, @r4
+	mov.l	dbcmdcnt_reg, k4
+	mov.l	dbcmdcnt_data1, k1
+	mov.l	k1, @k4
 
-	mov.l	dben_reg, r4
-	mov.l	dben_data1, r1
-	mov.l	r1, @r4
+	mov.l	dben_reg, k4
+	mov.l	dben_data1, k1
+	mov.l	k1, @k4
 
-	mov.l	dbrfpdn0_reg, r4
-	mov.l	dbrfpdn0_data2, r1
-	mov.l	r1, @r4
+	mov.l	dbrfpdn0_reg, k4
+	mov.l	dbrfpdn0_data2, k1
+	mov.l	k1, @k4
 #else
 	/* SBSC: set auto-refresh mode */
-	mov.l	1f, r4
-	mov.l	@r4, r2
-	mov.l   4f, r3
-	and	r3, r2
-	mov.l	r2, @r4
-	mov.l	6f, r4
-	mov.l	7f, r1
-	mov.l	8f, r2
-	mov.l	@r4, r3
-	mov	#-1, r4
-	add	r4, r3
-	or	r2, r3
-	mov.l	r3, @r1
+	mov.l	1f, k4
+	mov.l	@k4, k0
+	mov.l   4f, k1
+	and	k1, k0
+	mov.l	k0, @k4
+	mov.l	6f, k4
+	mov.l	8f, k0
+	mov.l	@k4, k1
+	mov	#-1, k4
+	add	k4, k1
+	or	k1, k0
+	mov.l	7f, k1
+	mov.l	k0, @k1
 #endif
 skip_restore_sf:
-	rts
+	/* jump to vbr vector */
+	mov.l	saved_vbr, k0
+	mov.l	offset_vbr, k4
+	add	k4, k0
+	jmp	@k0
 	 nop
 
 	.balign 4
+saved_mode:	.long	0
+saved_spc:	.long	0
+saved_sr:	.long	0
+saved_vbr:	.long	0
+offset_vbr:	.long	0x600
 #ifdef CONFIG_CPU_SUBTYPE_SH7724
 dben_reg:	.long	0xfd000010 /* DBEN */
 dben_data0:	.long	0
@@ -178,12 +233,12 @@ dbcmdcnt_data1:	.long	4
 7:	.long   0xfe400018 /* RTCNT */
 8:	.long   0xa55a0000
 
+
 /* interrupt vector @ 0x600 */
 	.balign 	0x400,0,0x400
 	.long	0xdeadbeef
 	.balign 	0x200,0,0x200
-	/* sh7722 will end up here in sleep mode */
-	rte
+	bra	restore_jump_vbr
 	 nop
 sh_mobile_standby_end:
 
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index e0590ffebd73..dce4f3ff0932 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -82,7 +82,8 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	cpuclk = clk_get(NULL, "cpu_clk");
 	if (IS_ERR(cpuclk)) {
-		printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
+		printk(KERN_ERR "cpufreq: couldn't get CPU#%d clk\n",
+		       policy->cpu);
 		return PTR_ERR(cpuclk);
 	}
 
@@ -95,22 +96,21 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->min		= policy->cpuinfo.min_freq;
 	policy->max		= policy->cpuinfo.max_freq;
 
-
 	/*
 	 * Catch the cases where the clock framework hasn't been wired up
 	 * properly to support scaling.
 	 */
 	if (unlikely(policy->min == policy->max)) {
 		printk(KERN_ERR "cpufreq: clock framework rate rounding "
-		       "not supported on this CPU.\n");
+		       "not supported on CPU#%d.\n", policy->cpu);
 
 		clk_put(cpuclk);
 		return -EINVAL;
 	}
 
-	printk(KERN_INFO "cpufreq: Frequencies - Minimum %u.%03u MHz, "
+	printk(KERN_INFO "cpufreq: CPU#%d Frequencies - Minimum %u.%03u MHz, "
 	       "Maximum %u.%03u MHz.\n",
-	       policy->min / 1000, policy->min % 1000,
+	       policy->cpu, policy->min / 1000, policy->min % 1000,
 	       policy->max / 1000, policy->max % 1000);
 
 	return 0;
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
new file mode 100644
index 000000000000..6f5ad1513409
--- /dev/null
+++ b/arch/sh/kernel/dumpstack.c
@@ -0,0 +1,123 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ *  Copyright (C) 2009  Matt Fleming
+ */
+#include <linux/kallsyms.h>
+#include <linux/ftrace.h>
+#include <linux/debug_locks.h>
+#include <asm/unwinder.h>
+#include <asm/stacktrace.h>
+
+void printk_address(unsigned long address, int reliable)
+{
+	printk(" [<%p>] %s%pS\n", (void *) address,
+			reliable ? "" : "? ", (void *) address);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{
+	struct task_struct *task = tinfo->task;
+	unsigned long ret_addr;
+	int index = task->curr_ret_stack;
+
+	if (addr != (unsigned long)return_to_handler)
+		return;
+
+	if (!task->ret_stack || index < *graph)
+		return;
+
+	index -= *graph;
+	ret_addr = task->ret_stack[index].ret;
+
+	ops->address(data, ret_addr, 1);
+
+	(*graph)++;
+}
+#else
+static inline void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{ }
+#endif
+
+void
+stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
+{
+	struct thread_info *context;
+	int graph = 0;
+
+	context = (struct thread_info *)
+		((unsigned long)sp & (~(THREAD_SIZE - 1)));
+
+	while (!kstack_end(sp)) {
+		unsigned long addr = *sp++;
+
+		if (__kernel_text_address(addr)) {
+			ops->address(data, addr, 1);
+
+			print_ftrace_graph_addr(addr, data, ops,
+						context, &graph);
+		}
+	}
+}
+
+static void
+print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+	printk(data);
+	print_symbol(msg, symbol);
+	printk("\n");
+}
+
+static void print_trace_warning(void *data, char *msg)
+{
+	printk("%s%s\n", (char *)data, msg);
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+	printk("%s <%s> ", (char *)data, name);
+	return 0;
+}
+
+/*
+ * Print one address/symbol entries per line.
+ */
+static void print_trace_address(void *data, unsigned long addr, int reliable)
+{
+	printk(data);
+	printk_address(addr, reliable);
+}
+
+static const struct stacktrace_ops print_trace_ops = {
+	.warning = print_trace_warning,
+	.warning_symbol = print_trace_warning_symbol,
+	.stack = print_trace_stack,
+	.address = print_trace_address,
+};
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs)
+{
+	if (regs && user_mode(regs))
+		return;
+
+	printk("\nCall trace:\n");
+
+	unwind_stack(tsk, regs, sp, &print_trace_ops, "");
+
+	printk("\n");
+
+	if (!tsk)
+		tsk = current;
+
+	debug_show_held_locks(tsk);
+}
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
new file mode 100644
index 000000000000..bc4d8d75332b
--- /dev/null
+++ b/arch/sh/kernel/dwarf.c
@@ -0,0 +1,972 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This is an implementation of a DWARF unwinder. Its main purpose is
+ * for generating stacktrace information. Based on the DWARF 3
+ * specification from http://www.dwarfstd.org.
+ *
+ * TODO:
+ *	- DWARF64 doesn't work.
+ *	- Registers with DWARF_VAL_OFFSET rules aren't handled properly.
+ */
+
+/* #define DEBUG */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/mempool.h>
+#include <linux/mm.h>
+#include <asm/dwarf.h>
+#include <asm/unwinder.h>
+#include <asm/sections.h>
+#include <asm/unaligned.h>
+#include <asm/dwarf.h>
+#include <asm/stacktrace.h>
+
+/* Reserve enough memory for two stack frames */
+#define DWARF_FRAME_MIN_REQ	2
+/* ... with 4 registers per frame. */
+#define DWARF_REG_MIN_REQ	(DWARF_FRAME_MIN_REQ * 4)
+
+static struct kmem_cache *dwarf_frame_cachep;
+static mempool_t *dwarf_frame_pool;
+
+static struct kmem_cache *dwarf_reg_cachep;
+static mempool_t *dwarf_reg_pool;
+
+static LIST_HEAD(dwarf_cie_list);
+static DEFINE_SPINLOCK(dwarf_cie_lock);
+
+static LIST_HEAD(dwarf_fde_list);
+static DEFINE_SPINLOCK(dwarf_fde_lock);
+
+static struct dwarf_cie *cached_cie;
+
+/**
+ *	dwarf_frame_alloc_reg - allocate memory for a DWARF register
+ *	@frame: the DWARF frame whose list of registers we insert on
+ *	@reg_num: the register number
+ *
+ *	Allocate space for, and initialise, a dwarf reg from
+ *	dwarf_reg_pool and insert it onto the (unsorted) linked-list of
+ *	dwarf registers for @frame.
+ *
+ *	Return the initialised DWARF reg.
+ */
+static struct dwarf_reg *dwarf_frame_alloc_reg(struct dwarf_frame *frame,
+					       unsigned int reg_num)
+{
+	struct dwarf_reg *reg;
+
+	reg = mempool_alloc(dwarf_reg_pool, GFP_ATOMIC);
+	if (!reg) {
+		printk(KERN_WARNING "Unable to allocate a DWARF register\n");
+		/*
+		 * Let's just bomb hard here, we have no way to
+		 * gracefully recover.
+		 */
+		UNWINDER_BUG();
+	}
+
+	reg->number = reg_num;
+	reg->addr = 0;
+	reg->flags = 0;
+
+	list_add(&reg->link, &frame->reg_list);
+
+	return reg;
+}
+
+static void dwarf_frame_free_regs(struct dwarf_frame *frame)
+{
+	struct dwarf_reg *reg, *n;
+
+	list_for_each_entry_safe(reg, n, &frame->reg_list, link) {
+		list_del(&reg->link);
+		mempool_free(reg, dwarf_reg_pool);
+	}
+}
+
+/**
+ *	dwarf_frame_reg - return a DWARF register
+ *	@frame: the DWARF frame to search in for @reg_num
+ *	@reg_num: the register number to search for
+ *
+ *	Lookup and return the dwarf reg @reg_num for this frame. Return
+ *	NULL if @reg_num is an register invalid number.
+ */
+static struct dwarf_reg *dwarf_frame_reg(struct dwarf_frame *frame,
+					 unsigned int reg_num)
+{
+	struct dwarf_reg *reg;
+
+	list_for_each_entry(reg, &frame->reg_list, link) {
+		if (reg->number == reg_num)
+			return reg;
+	}
+
+	return NULL;
+}
+
+/**
+ *	dwarf_read_addr - read dwarf data
+ *	@src: source address of data
+ *	@dst: destination address to store the data to
+ *
+ *	Read 'n' bytes from @src, where 'n' is the size of an address on
+ *	the native machine. We return the number of bytes read, which
+ *	should always be 'n'. We also have to be careful when reading
+ *	from @src and writing to @dst, because they can be arbitrarily
+ *	aligned. Return 'n' - the number of bytes read.
+ */
+static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
+{
+	u32 val = get_unaligned(src);
+	put_unaligned(val, dst);
+	return sizeof(unsigned long *);
+}
+
+/**
+ *	dwarf_read_uleb128 - read unsigned LEB128 data
+ *	@addr: the address where the ULEB128 data is stored
+ *	@ret: address to store the result
+ *
+ *	Decode an unsigned LEB128 encoded datum. The algorithm is taken
+ *	from Appendix C of the DWARF 3 spec. For information on the
+ *	encodings refer to section "7.6 - Variable Length Data". Return
+ *	the number of bytes read.
+ */
+static inline unsigned long dwarf_read_uleb128(char *addr, unsigned int *ret)
+{
+	unsigned int result;
+	unsigned char byte;
+	int shift, count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		count++;
+
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_leb128 - read signed LEB128 data
+ *	@addr: the address of the LEB128 encoded data
+ *	@ret: address to store the result
+ *
+ *	Decode signed LEB128 data. The algorithm is taken from Appendix
+ *	C of the DWARF 3 spec. Return the number of bytes read.
+ */
+static inline unsigned long dwarf_read_leb128(char *addr, int *ret)
+{
+	unsigned char byte;
+	int result, shift;
+	int num_bits;
+	int count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+		count++;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	/* The number of bits in a signed integer. */
+	num_bits = 8 * sizeof(result);
+
+	if ((shift < num_bits) && (byte & 0x40))
+		result |= (-1 << shift);
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_encoded_value - return the decoded value at @addr
+ *	@addr: the address of the encoded value
+ *	@val: where to write the decoded value
+ *	@encoding: the encoding with which we can decode @addr
+ *
+ *	GCC emits encoded address in the .eh_frame FDE entries. Decode
+ *	the value at @addr using @encoding. The decoded value is written
+ *	to @val and the number of bytes read is returned.
+ */
+static int dwarf_read_encoded_value(char *addr, unsigned long *val,
+				    char encoding)
+{
+	unsigned long decoded_addr = 0;
+	int count = 0;
+
+	switch (encoding & 0x70) {
+	case DW_EH_PE_absptr:
+		break;
+	case DW_EH_PE_pcrel:
+		decoded_addr = (unsigned long)addr;
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", (encoding & 0x70));
+		UNWINDER_BUG();
+	}
+
+	if ((encoding & 0x07) == 0x00)
+		encoding |= DW_EH_PE_udata4;
+
+	switch (encoding & 0x0f) {
+	case DW_EH_PE_sdata4:
+	case DW_EH_PE_udata4:
+		count += 4;
+		decoded_addr += get_unaligned((u32 *)addr);
+		__raw_writel(decoded_addr, val);
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", encoding);
+		UNWINDER_BUG();
+	}
+
+	return count;
+}
+
+/**
+ *	dwarf_entry_len - return the length of an FDE or CIE
+ *	@addr: the address of the entry
+ *	@len: the length of the entry
+ *
+ *	Read the initial_length field of the entry and store the size of
+ *	the entry in @len. We return the number of bytes read. Return a
+ *	count of 0 on error.
+ */
+static inline int dwarf_entry_len(char *addr, unsigned long *len)
+{
+	u32 initial_len;
+	int count;
+
+	initial_len = get_unaligned((u32 *)addr);
+	count = 4;
+
+	/*
+	 * An initial length field value in the range DW_LEN_EXT_LO -
+	 * DW_LEN_EXT_HI indicates an extension, and should not be
+	 * interpreted as a length. The only extension that we currently
+	 * understand is the use of DWARF64 addresses.
+	 */
+	if (initial_len >= DW_EXT_LO && initial_len <= DW_EXT_HI) {
+		/*
+		 * The 64-bit length field immediately follows the
+		 * compulsory 32-bit length field.
+		 */
+		if (initial_len == DW_EXT_DWARF64) {
+			*len = get_unaligned((u64 *)addr + 4);
+			count = 12;
+		} else {
+			printk(KERN_WARNING "Unknown DWARF extension\n");
+			count = 0;
+		}
+	} else
+		*len = initial_len;
+
+	return count;
+}
+
+/**
+ *	dwarf_lookup_cie - locate the cie
+ *	@cie_ptr: pointer to help with lookup
+ */
+static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
+{
+	struct dwarf_cie *cie;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+	/*
+	 * We've cached the last CIE we looked up because chances are
+	 * that the FDE wants this CIE.
+	 */
+	if (cached_cie && cached_cie->cie_pointer == cie_ptr) {
+		cie = cached_cie;
+		goto out;
+	}
+
+	list_for_each_entry(cie, &dwarf_cie_list, link) {
+		if (cie->cie_pointer == cie_ptr) {
+			cached_cie = cie;
+			break;
+		}
+	}
+
+	/* Couldn't find the entry in the list. */
+	if (&cie->link == &dwarf_cie_list)
+		cie = NULL;
+out:
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+	return cie;
+}
+
+/**
+ *	dwarf_lookup_fde - locate the FDE that covers pc
+ *	@pc: the program counter
+ */
+struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
+{
+	struct dwarf_fde *fde;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+
+	list_for_each_entry(fde, &dwarf_fde_list, link) {
+		unsigned long start, end;
+
+		start = fde->initial_location;
+		end = fde->initial_location + fde->address_range;
+
+		if (pc >= start && pc < end)
+			break;
+	}
+
+	/* Couldn't find the entry in the list. */
+	if (&fde->link == &dwarf_fde_list)
+		fde = NULL;
+
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return fde;
+}
+
+/**
+ *	dwarf_cfa_execute_insns - execute instructions to calculate a CFA
+ *	@insn_start: address of the first instruction
+ *	@insn_end: address of the last instruction
+ *	@cie: the CIE for this function
+ *	@fde: the FDE for this function
+ *	@frame: the instructions calculate the CFA for this frame
+ *	@pc: the program counter of the address we're interested in
+ *
+ *	Execute the Call Frame instruction sequence starting at
+ *	@insn_start and ending at @insn_end. The instructions describe
+ *	how to calculate the Canonical Frame Address of a stackframe.
+ *	Store the results in @frame.
+ */
+static int dwarf_cfa_execute_insns(unsigned char *insn_start,
+				   unsigned char *insn_end,
+				   struct dwarf_cie *cie,
+				   struct dwarf_fde *fde,
+				   struct dwarf_frame *frame,
+				   unsigned long pc)
+{
+	unsigned char insn;
+	unsigned char *current_insn;
+	unsigned int count, delta, reg, expr_len, offset;
+	struct dwarf_reg *regp;
+
+	current_insn = insn_start;
+
+	while (current_insn < insn_end && frame->pc <= pc) {
+		insn = __raw_readb(current_insn++);
+
+		/*
+		 * Firstly, handle the opcodes that embed their operands
+		 * in the instructions.
+		 */
+		switch (DW_CFA_opcode(insn)) {
+		case DW_CFA_advance_loc:
+			delta = DW_CFA_operand(insn);
+			delta *= cie->code_alignment_factor;
+			frame->pc += delta;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_offset:
+			reg = DW_CFA_operand(insn);
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->addr = offset;
+			regp->flags |= DWARF_REG_OFFSET;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_restore:
+			reg = DW_CFA_operand(insn);
+			continue;
+			/* NOTREACHED */
+		}
+
+		/*
+		 * Secondly, handle the opcodes that don't embed their
+		 * operands in the instruction.
+		 */
+		switch (insn) {
+		case DW_CFA_nop:
+			continue;
+		case DW_CFA_advance_loc1:
+			delta = *current_insn++;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc2:
+			delta = get_unaligned((u16 *)current_insn);
+			current_insn += 2;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc4:
+			delta = get_unaligned((u32 *)current_insn);
+			current_insn += 4;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_offset_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			break;
+		case DW_CFA_restore_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			break;
+		case DW_CFA_undefined:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_UNDEFINED;
+			break;
+		case DW_CFA_def_cfa:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_offset);
+			current_insn += count;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_register:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_offset:
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			frame->cfa_offset = offset;
+			break;
+		case DW_CFA_def_cfa_expression:
+			count = dwarf_read_uleb128(current_insn, &expr_len);
+			current_insn += count;
+
+			frame->cfa_expr = current_insn;
+			frame->cfa_expr_len = expr_len;
+			current_insn += expr_len;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_EXP;
+			break;
+		case DW_CFA_offset_extended_sf:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_REG_OFFSET;
+			regp->addr = offset;
+			break;
+		case DW_CFA_val_offset:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			offset *= cie->data_alignment_factor;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_VAL_OFFSET;
+			regp->addr = offset;
+			break;
+		case DW_CFA_GNU_args_size:
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			break;
+		case DW_CFA_GNU_negative_offset_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn, &offset);
+			offset *= cie->data_alignment_factor;
+
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_REG_OFFSET;
+			regp->addr = -offset;
+			break;
+		default:
+			pr_debug("unhandled DWARF instruction 0x%x\n", insn);
+			UNWINDER_BUG();
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	dwarf_unwind_stack - recursively unwind the stack
+ *	@pc: address of the function to unwind
+ *	@prev: struct dwarf_frame of the previous stackframe on the callstack
+ *
+ *	Return a struct dwarf_frame representing the most recent frame
+ *	on the callstack. Each of the lower (older) stack frames are
+ *	linked via the "prev" member.
+ */
+struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
+					struct dwarf_frame *prev)
+{
+	struct dwarf_frame *frame;
+	struct dwarf_cie *cie;
+	struct dwarf_fde *fde;
+	struct dwarf_reg *reg;
+	unsigned long addr;
+
+	/*
+	 * If this is the first invocation of this recursive function we
+	 * need get the contents of a physical register to get the CFA
+	 * in order to begin the virtual unwinding of the stack.
+	 *
+	 * NOTE: the return address is guaranteed to be setup by the
+	 * time this function makes its first function call.
+	 */
+	if (!pc && !prev)
+		pc = (unsigned long)current_text_addr();
+
+	frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
+	if (!frame) {
+		printk(KERN_ERR "Unable to allocate a dwarf frame\n");
+		UNWINDER_BUG();
+	}
+
+	INIT_LIST_HEAD(&frame->reg_list);
+	frame->flags = 0;
+	frame->prev = prev;
+	frame->return_addr = 0;
+
+	fde = dwarf_lookup_fde(pc);
+	if (!fde) {
+		/*
+		 * This is our normal exit path - the one that stops the
+		 * recursion. There's two reasons why we might exit
+		 * here,
+		 *
+		 *	a) pc has no asscociated DWARF frame info and so
+		 *	we don't know how to unwind this frame. This is
+		 *	usually the case when we're trying to unwind a
+		 *	frame that was called from some assembly code
+		 *	that has no DWARF info, e.g. syscalls.
+		 *
+		 *	b) the DEBUG info for pc is bogus. There's
+		 *	really no way to distinguish this case from the
+		 *	case above, which sucks because we could print a
+		 *	warning here.
+		 */
+		goto bail;
+	}
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+
+	frame->pc = fde->initial_location;
+
+	/* CIE initial instructions */
+	dwarf_cfa_execute_insns(cie->initial_instructions,
+				cie->instructions_end, cie, fde,
+				frame, pc);
+
+	/* FDE instructions */
+	dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
+				fde, frame, pc);
+
+	/* Calculate the CFA */
+	switch (frame->flags) {
+	case DWARF_FRAME_CFA_REG_OFFSET:
+		if (prev) {
+			reg = dwarf_frame_reg(prev, frame->cfa_register);
+			UNWINDER_BUG_ON(!reg);
+			UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
+
+			addr = prev->cfa + reg->addr;
+			frame->cfa = __raw_readl(addr);
+
+		} else {
+			/*
+			 * Again, this is the first invocation of this
+			 * recurisve function. We need to physically
+			 * read the contents of a register in order to
+			 * get the Canonical Frame Address for this
+			 * function.
+			 */
+			frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
+		}
+
+		frame->cfa += frame->cfa_offset;
+		break;
+	default:
+		UNWINDER_BUG();
+	}
+
+	reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
+
+	/*
+	 * If we haven't seen the return address register or the return
+	 * address column is undefined then we must assume that this is
+	 * the end of the callstack.
+	 */
+	if (!reg || reg->flags == DWARF_UNDEFINED)
+		goto bail;
+
+	UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
+
+	addr = frame->cfa + reg->addr;
+	frame->return_addr = __raw_readl(addr);
+
+	return frame;
+
+bail:
+	dwarf_frame_free_regs(frame);
+	mempool_free(frame, dwarf_frame_pool);
+	return NULL;
+}
+
+static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
+			   unsigned char *end)
+{
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+
+	cie = kzalloc(sizeof(*cie), GFP_KERNEL);
+	if (!cie)
+		return -ENOMEM;
+
+	cie->length = len;
+
+	/*
+	 * Record the offset into the .eh_frame section
+	 * for this CIE. It allows this CIE to be
+	 * quickly and easily looked up from the
+	 * corresponding FDE.
+	 */
+	cie->cie_pointer = (unsigned long)entry;
+
+	cie->version = *(char *)p++;
+	UNWINDER_BUG_ON(cie->version != 1);
+
+	cie->augmentation = p;
+	p += strlen(cie->augmentation) + 1;
+
+	count = dwarf_read_uleb128(p, &cie->code_alignment_factor);
+	p += count;
+
+	count = dwarf_read_leb128(p, &cie->data_alignment_factor);
+	p += count;
+
+	/*
+	 * Which column in the rule table contains the
+	 * return address?
+	 */
+	if (cie->version == 1) {
+		cie->return_address_reg = __raw_readb(p);
+		p++;
+	} else {
+		count = dwarf_read_uleb128(p, &cie->return_address_reg);
+		p += count;
+	}
+
+	if (cie->augmentation[0] == 'z') {
+		unsigned int length, count;
+		cie->flags |= DWARF_CIE_Z_AUGMENTATION;
+
+		count = dwarf_read_uleb128(p, &length);
+		p += count;
+
+		UNWINDER_BUG_ON((unsigned char *)p > end);
+
+		cie->initial_instructions = p + length;
+		cie->augmentation++;
+	}
+
+	while (*cie->augmentation) {
+		/*
+		 * "L" indicates a byte showing how the
+		 * LSDA pointer is encoded. Skip it.
+		 */
+		if (*cie->augmentation == 'L') {
+			p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'R') {
+			/*
+			 * "R" indicates a byte showing
+			 * how FDE addresses are
+			 * encoded.
+			 */
+			cie->encoding = *(char *)p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'P') {
+			/*
+			 * "R" indicates a personality
+			 * routine in the CIE
+			 * augmentation.
+			 */
+			UNWINDER_BUG();
+		} else if (*cie->augmentation == 'S') {
+			UNWINDER_BUG();
+		} else {
+			/*
+			 * Unknown augmentation. Assume
+			 * 'z' augmentation.
+			 */
+			p = cie->initial_instructions;
+			UNWINDER_BUG_ON(!p);
+			break;
+		}
+	}
+
+	cie->initial_instructions = p;
+	cie->instructions_end = end;
+
+	/* Add to list */
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+	list_add_tail(&cie->link, &dwarf_cie_list);
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	return 0;
+}
+
+static int dwarf_parse_fde(void *entry, u32 entry_type,
+			   void *start, unsigned long len,
+			   unsigned char *end)
+{
+	struct dwarf_fde *fde;
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+	void *p = start;
+
+	fde = kzalloc(sizeof(*fde), GFP_KERNEL);
+	if (!fde)
+		return -ENOMEM;
+
+	fde->length = len;
+
+	/*
+	 * In a .eh_frame section the CIE pointer is the
+	 * delta between the address within the FDE
+	 */
+	fde->cie_pointer = (unsigned long)(p - entry_type - 4);
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+	fde->cie = cie;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->initial_location,
+						 cie->encoding);
+	else
+		count = dwarf_read_addr(p, &fde->initial_location);
+
+	p += count;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->address_range,
+						 cie->encoding & 0x0f);
+	else
+		count = dwarf_read_addr(p, &fde->address_range);
+
+	p += count;
+
+	if (fde->cie->flags & DWARF_CIE_Z_AUGMENTATION) {
+		unsigned int length;
+		count = dwarf_read_uleb128(p, &length);
+		p += count + length;
+	}
+
+	/* Call frame instructions. */
+	fde->instructions = p;
+	fde->end = end;
+
+	/* Add to list. */
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+	list_add_tail(&fde->link, &dwarf_fde_list);
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return 0;
+}
+
+static void dwarf_unwinder_dump(struct task_struct *task,
+				struct pt_regs *regs,
+				unsigned long *sp,
+				const struct stacktrace_ops *ops,
+				void *data)
+{
+	struct dwarf_frame *frame, *_frame;
+	unsigned long return_addr;
+
+	_frame = NULL;
+	return_addr = 0;
+
+	while (1) {
+		frame = dwarf_unwind_stack(return_addr, _frame);
+
+		if (_frame) {
+			dwarf_frame_free_regs(_frame);
+			mempool_free(_frame, dwarf_frame_pool);
+		}
+
+		_frame = frame;
+
+		if (!frame || !frame->return_addr)
+			break;
+
+		return_addr = frame->return_addr;
+		ops->address(data, return_addr, 1);
+	}
+}
+
+static struct unwinder dwarf_unwinder = {
+	.name = "dwarf-unwinder",
+	.dump = dwarf_unwinder_dump,
+	.rating = 150,
+};
+
+static void dwarf_unwinder_cleanup(void)
+{
+	struct dwarf_cie *cie;
+	struct dwarf_fde *fde;
+
+	/*
+	 * Deallocate all the memory allocated for the DWARF unwinder.
+	 * Traverse all the FDE/CIE lists and remove and free all the
+	 * memory associated with those data structures.
+	 */
+	list_for_each_entry(cie, &dwarf_cie_list, link)
+		kfree(cie);
+
+	list_for_each_entry(fde, &dwarf_fde_list, link)
+		kfree(fde);
+
+	kmem_cache_destroy(dwarf_reg_cachep);
+	kmem_cache_destroy(dwarf_frame_cachep);
+}
+
+/**
+ *	dwarf_unwinder_init - initialise the dwarf unwinder
+ *
+ *	Build the data structures describing the .dwarf_frame section to
+ *	make it easier to lookup CIE and FDE entries. Because the
+ *	.eh_frame section is packed as tightly as possible it is not
+ *	easy to lookup the FDE for a given PC, so we build a list of FDE
+ *	and CIE entries that make it easier.
+ */
+static int __init dwarf_unwinder_init(void)
+{
+	u32 entry_type;
+	void *p, *entry;
+	int count, err = 0;
+	unsigned long len;
+	unsigned int c_entries, f_entries;
+	unsigned char *end;
+	INIT_LIST_HEAD(&dwarf_cie_list);
+	INIT_LIST_HEAD(&dwarf_fde_list);
+
+	c_entries = 0;
+	f_entries = 0;
+	entry = &__start_eh_frame;
+
+	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
+			sizeof(struct dwarf_frame), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+
+	dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
+			sizeof(struct dwarf_reg), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+
+	dwarf_frame_pool = mempool_create(DWARF_FRAME_MIN_REQ,
+					  mempool_alloc_slab,
+					  mempool_free_slab,
+					  dwarf_frame_cachep);
+
+	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
+					 mempool_alloc_slab,
+					 mempool_free_slab,
+					 dwarf_reg_cachep);
+
+	while ((char *)entry < __stop_eh_frame) {
+		p = entry;
+
+		count = dwarf_entry_len(p, &len);
+		if (count == 0) {
+			/*
+			 * We read a bogus length field value. There is
+			 * nothing we can do here apart from disabling
+			 * the DWARF unwinder. We can't even skip this
+			 * entry and move to the next one because 'len'
+			 * tells us where our next entry is.
+			 */
+			goto out;
+		} else
+			p += count;
+
+		/* initial length does not include itself */
+		end = p + len;
+
+		entry_type = get_unaligned((u32 *)p);
+		p += 4;
+
+		if (entry_type == DW_EH_FRAME_CIE) {
+			err = dwarf_parse_cie(entry, p, len, end);
+			if (err < 0)
+				goto out;
+			else
+				c_entries++;
+		} else {
+			err = dwarf_parse_fde(entry, entry_type, p, len, end);
+			if (err < 0)
+				goto out;
+			else
+				f_entries++;
+		}
+
+		entry = (char *)entry + len + 4;
+	}
+
+	printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
+	       c_entries, f_entries);
+
+	err = unwinder_register(&dwarf_unwinder);
+	if (err)
+		goto out;
+
+	return 0;
+
+out:
+	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
+	dwarf_unwinder_cleanup();
+	return -EINVAL;
+}
+early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index a952dcf9999d..81a46145ffa5 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -134,7 +134,7 @@ static void scif_sercon_init(char *s)
 	sci_out(&scif_port, SCFCR, 0x0030);	/* TTRG=b'11 */
 	sci_out(&scif_port, SCSCR, 0x0030);	/* TE, RE */
 }
-#elif defined(CONFIG_CPU_SH4)
+#elif defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
 #define DEFAULT_BAUD 115200
 /*
  * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
@@ -220,8 +220,7 @@ static int __init setup_early_printk(char *buf)
 		early_console = &scif_console;
 
 #if !defined(CONFIG_SH_STANDARD_BIOS)
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
 		scif_sercon_init(buf + 6);
 #endif
 #endif
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index d62359cfbbe2..68d9223b145e 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -43,9 +43,10 @@
  *	syscall #
  *
  */
+#include <asm/dwarf.h>
 
 #if defined(CONFIG_PREEMPT)
-#  define preempt_stop()	cli
+#  define preempt_stop()	cli ; TRACE_IRQS_OFF
 #else
 #  define preempt_stop()
 #  define resume_kernel		__restore_all
@@ -55,11 +56,7 @@
 	.align	2
 ENTRY(exception_error)
 	!
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_ON
 	sti
 	mov.l	1f, r0
 	jmp	@r0
@@ -67,18 +64,15 @@ ENTRY(exception_error)
 
 	.align	2
 1:	.long	do_exception_error
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:	.long	trace_hardirqs_on
-#endif
 
 	.align	2
 ret_from_exception:
+	CFI_STARTPROC simple
+	CFI_DEF_CFA r14, 0
+	CFI_REL_OFFSET 17, 64
+	CFI_REL_OFFSET 15, 0
+	CFI_REL_OFFSET 14, 56
 	preempt_stop()
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	4f, r0
-	jsr	@r0
-	 nop
-#endif
 ENTRY(ret_from_irq)
 	!
 	mov	#OFF_SR, r0
@@ -93,6 +87,7 @@ ENTRY(ret_from_irq)
 	 nop
 ENTRY(resume_kernel)
 	cli
+	TRACE_IRQS_OFF
 	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
 	tst	r0, r0
 	bf	noresched
@@ -103,8 +98,9 @@ need_resched:
 
 	mov	#OFF_SR, r0
 	mov.l	@(r0,r15), r0		! get status register
-	and	#0xf0, r0		! interrupts off (exception path)?
-	cmp/eq	#0xf0, r0
+	shlr	r0
+	and	#(0xf0>>1), r0		! interrupts off (exception path)?
+	cmp/eq	#(0xf0>>1), r0
 	bt	noresched
 	mov.l	3f, r0
 	jsr	@r0			! call preempt_schedule_irq
@@ -125,13 +121,9 @@ noresched:
 ENTRY(resume_userspace)
 	! r8: current_thread_info
 	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_OfF
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_WORK_MASK, r0
+	tst	#(_TIF_WORK_MASK & 0xff), r0
 	bt/s	__restore_all
 	 tst	#_TIF_NEED_RESCHED, r0
 
@@ -156,14 +148,10 @@ work_resched:
 	jsr	@r1				! schedule
 	 nop
 	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_OFF
 	!
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_WORK_MASK, r0
+	tst	#(_TIF_WORK_MASK & 0xff), r0
 	bt	__restore_all
 	bra	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
@@ -172,23 +160,15 @@ work_resched:
 1:	.long	schedule
 2:	.long	do_notify_resume
 3:	.long	resume_userspace
-#ifdef CONFIG_TRACE_IRQFLAGS
-4:	.long	trace_hardirqs_on
-5:	.long	trace_hardirqs_off
-#endif
 
 	.align	2
 syscall_exit_work:
 	! r0: current_thread_info->flags
 	! r8: current_thread_info
-	tst	#_TIF_WORK_SYSCALL_MASK, r0
+	tst	#(_TIF_WORK_SYSCALL_MASK & 0xff), r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_ON
 	sti
 	mov	r15, r4
 	mov.l	8f, r0			! do_syscall_trace_leave
@@ -226,12 +206,25 @@ syscall_trace_entry:
 	 mov.l	r0, @(OFF_R0,r15)	! Return value
 
 __restore_all:
-	mov.l	1f, r0
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0	! get status register
+
+	shlr2	r0
+	and	#0x3c, r0
+	cmp/eq	#0x3c, r0
+	bt	1f
+	TRACE_IRQS_ON
+	bra	2f
+	 nop
+1:
+	TRACE_IRQS_OFF
+2:
+	mov.l	3f, r0
 	jmp	@r0
 	 nop
 
 	.align	2
-1:	.long	restore_all
+3:	.long	restore_all
 
 	.align	2
 syscall_badsys:			! Bad syscall number
@@ -259,6 +252,7 @@ debug_trap:
 	 nop
 	bra	__restore_all
 	 nop
+	CFI_ENDPROC
 
 	.align	2
 1:	.long	debug_trap_table
@@ -304,6 +298,7 @@ ret_from_fork:
  * system calls and debug traps through their respective jump tables.
  */
 ENTRY(system_call)
+	setup_frame_reg
 #if !defined(CONFIG_CPU_SH2)
 	mov.l	1f, r9
 	mov.l	@r9, r8		! Read from TRA (Trap Address) Register
@@ -321,18 +316,18 @@ ENTRY(system_call)
 	bt/s	debug_trap		! it's a debug trap..
 	 nop
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r10
-	jsr	@r10
-	 nop
-#endif
+	TRACE_IRQS_ON
 	sti
 
 	!
 	get_current_thread_info r8, r10
 	mov.l	@(TI_FLAGS,r8), r8
-	mov	#_TIF_WORK_SYSCALL_MASK, r10
+	mov	#(_TIF_WORK_SYSCALL_MASK & 0xff), r10
+	mov	#(_TIF_WORK_SYSCALL_MASK >> 8), r9
 	tst	r10, r8
+	shll8	r9
+	bf	syscall_trace_entry
+	tst	r9, r8
 	bf	syscall_trace_entry
 	!
 	mov.l	2f, r8			! Number of syscalls
@@ -351,15 +346,15 @@ syscall_call:
 	!
 syscall_exit:
 	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	6f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_OFF
 	!
 	get_current_thread_info r8, r0
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_ALLWORK_MASK, r0
+	tst	#(_TIF_ALLWORK_MASK & 0xff), r0
+	mov	#(_TIF_ALLWORK_MASK >> 8), r1
+	bf	syscall_exit_work
+	shlr8	r0
+	tst	r0, r1
 	bf	syscall_exit_work
 	bra	__restore_all
 	 nop
@@ -369,9 +364,5 @@ syscall_exit:
 #endif
 2:	.long	NR_syscalls
 3:	.long	sys_call_table
-#ifdef CONFIG_TRACE_IRQFLAGS
-5:	.long	trace_hardirqs_on
-6:	.long	trace_hardirqs_off
-#endif
 7:	.long	do_syscall_trace_enter
 8:	.long	do_syscall_trace_leave
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 066f37dc32a9..a3dcc6d5d253 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -16,9 +16,13 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/kernel.h>
 #include <asm/ftrace.h>
 #include <asm/cacheflush.h>
+#include <asm/unistd.h>
+#include <trace/syscall.h>
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
 
 static unsigned char ftrace_nop[4];
@@ -131,3 +135,187 @@ int __init ftrace_dyn_arch_init(void *data)
 
 	return 0;
 }
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
+
+static int ftrace_mod(unsigned long ip, unsigned long old_addr,
+		      unsigned long new_addr)
+{
+	unsigned char code[MCOUNT_INSN_SIZE];
+
+	if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	if (old_addr != __raw_readl((unsigned long *)code))
+		return -EINVAL;
+
+	__raw_writel(new_addr, ip);
+	return 0;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned long ip, old_addr, new_addr;
+
+	ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
+	old_addr = (unsigned long)(&skip_trace);
+	new_addr = (unsigned long)(&ftrace_graph_caller);
+
+	return ftrace_mod(ip, old_addr, new_addr);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned long ip, old_addr, new_addr;
+
+	ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
+	old_addr = (unsigned long)(&ftrace_graph_caller);
+	new_addr = (unsigned long)(&skip_trace);
+
+	return ftrace_mod(ip, old_addr, new_addr);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in the current thread info.
+ *
+ * This is the main routine for the function graph tracer. The function
+ * graph tracer essentially works like this:
+ *
+ * parent is the stack address containing self_addr's return address.
+ * We pull the real return address out of parent and store it in
+ * current's ret_stack. Then, we replace the return address on the stack
+ * with the address of return_to_handler. self_addr is the function that
+ * called mcount.
+ *
+ * When self_addr returns, it will jump to return_to_handler which calls
+ * ftrace_return_to_handler. ftrace_return_to_handler will pull the real
+ * return address off of current's ret_stack and jump to it.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	unsigned long old;
+	int faulted, err;
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * Protect against fault, even if it shouldn't
+	 * happen. This tool is too much intrusive to
+	 * ignore such a protection.
+	 */
+	__asm__ __volatile__(
+		"1:						\n\t"
+		"mov.l		@%2, %0				\n\t"
+		"2:						\n\t"
+		"mov.l		%3, @%2				\n\t"
+		"mov		#0, %1				\n\t"
+		"3:						\n\t"
+		".section .fixup, \"ax\"			\n\t"
+		"4:						\n\t"
+		"mov.l		5f, %0				\n\t"
+		"jmp		@%0				\n\t"
+		" mov		#1, %1				\n\t"
+		".balign 4					\n\t"
+		"5:	.long 3b				\n\t"
+		".previous					\n\t"
+		".section __ex_table,\"a\"			\n\t"
+		".long 1b, 4b					\n\t"
+		".long 2b, 4b					\n\t"
+		".previous					\n\t"
+		: "=&r" (old), "=r" (faulted)
+		: "r" (parent), "r" (return_hooker)
+	);
+
+	if (unlikely(faulted)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		return;
+	}
+
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0);
+	if (err == -EBUSY) {
+		__raw_writel(old, parent);
+		return;
+	}
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		__raw_writel(old, parent);
+	}
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+extern unsigned long __start_syscalls_metadata[];
+extern unsigned long __stop_syscalls_metadata[];
+extern unsigned long *sys_call_table;
+
+static struct syscall_metadata **syscalls_metadata;
+
+static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
+{
+	struct syscall_metadata *start;
+	struct syscall_metadata *stop;
+	char str[KSYM_SYMBOL_LEN];
+
+
+	start = (struct syscall_metadata *)__start_syscalls_metadata;
+	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
+	kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str);
+
+	for ( ; start < stop; start++) {
+		if (start->name && !strcmp(start->name, str))
+			return start;
+	}
+
+	return NULL;
+}
+
+struct syscall_metadata *syscall_nr_to_meta(int nr)
+{
+	if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0)
+		return NULL;
+
+	return syscalls_metadata[nr];
+}
+
+void arch_init_ftrace_syscalls(void)
+{
+	int i;
+	struct syscall_metadata *meta;
+	unsigned long **psys_syscall_table = &sys_call_table;
+	static atomic_t refs;
+
+	if (atomic_inc_return(&refs) != 1)
+		goto end;
+
+	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
+					FTRACE_SYSCALL_MAX, GFP_KERNEL);
+	if (!syscalls_metadata) {
+		WARN_ON(1);
+		return;
+	}
+
+	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
+		meta = find_syscall_meta(psys_syscall_table[i]);
+		syscalls_metadata[i] = meta;
+	}
+	return;
+
+	/* Paranoid: avoid overflow */
+end:
+	atomic_dec(&refs);
+}
+#endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 4f85fffaa557..4770c241c679 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -1,12 +1,9 @@
 /*
- * linux/arch/sh/kernel/io.c
+ * arch/sh/kernel/io.c - Machine independent I/O functions.
  *
- * Copyright (C) 2000  Stuart Menefy
+ * Copyright (C) 2000 - 2009  Stuart Menefy
  * Copyright (C) 2005  Paul Mundt
  *
- * Provide real functions which expand to whatever the header file defined.
- * Also definitions of machine independent IO functions.
- *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -18,33 +15,87 @@
 
 /*
  * Copy data from IO memory space to "real" memory space.
- * This needs to be optimized.
  */
 void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned long count)
 {
-	unsigned char *p = to;
-        while (count) {
-                count--;
-                *p = readb(from);
-                p++;
-                from++;
-        }
+	/*
+	 * Would it be worthwhile doing byte and long transfers first
+	 * to try and get aligned?
+	 */
+#ifdef CONFIG_CPU_SH4
+	if ((count >= 0x20) &&
+	     (((u32)to & 0x1f) == 0) && (((u32)from & 0x3) == 0)) {
+		int tmp2, tmp3, tmp4, tmp5, tmp6;
+
+		__asm__ __volatile__(
+			"1:			\n\t"
+			"mov.l	@%7+, r0	\n\t"
+			"mov.l	@%7+, %2	\n\t"
+			"movca.l r0, @%0	\n\t"
+			"mov.l	@%7+, %3	\n\t"
+			"mov.l	@%7+, %4	\n\t"
+			"mov.l	@%7+, %5	\n\t"
+			"mov.l	@%7+, %6	\n\t"
+			"mov.l	@%7+, r7	\n\t"
+			"mov.l	@%7+, r0	\n\t"
+			"mov.l	%2, @(0x04,%0)	\n\t"
+			"mov	#0x20, %2	\n\t"
+			"mov.l	%3, @(0x08,%0)	\n\t"
+			"sub	%2, %1		\n\t"
+			"mov.l	%4, @(0x0c,%0)	\n\t"
+			"cmp/hi	%1, %2		! T if 32 > count	\n\t"
+			"mov.l	%5, @(0x10,%0)	\n\t"
+			"mov.l	%6, @(0x14,%0)	\n\t"
+			"mov.l	r7, @(0x18,%0)	\n\t"
+			"mov.l	r0, @(0x1c,%0)	\n\t"
+			"bf.s	1b		\n\t"
+			" add	#0x20, %0	\n\t"
+			: "=&r" (to), "=&r" (count),
+			  "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
+			  "=&r" (tmp5), "=&r" (tmp6), "=&r" (from)
+			: "7"(from), "0" (to), "1" (count)
+			: "r0", "r7", "t", "memory");
+	}
+#endif
+
+	if ((((u32)to | (u32)from) & 0x3) == 0) {
+		for (; count > 3; count -= 4) {
+			*(u32 *)to = *(volatile u32 *)from;
+			to += 4;
+			from += 4;
+		}
+	}
+
+	for (; count > 0; count--) {
+		*(u8 *)to = *(volatile u8 *)from;
+		to++;
+		from++;
+	}
+
+	mb();
 }
 EXPORT_SYMBOL(memcpy_fromio);
 
 /*
  * Copy data from "real" memory space to IO memory space.
- * This needs to be optimized.
  */
 void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
 {
-	const unsigned char *p = from;
-        while (count) {
-                count--;
-                writeb(*p, to);
-                p++;
-                to++;
-        }
+	if ((((u32)to | (u32)from) & 0x3) == 0) {
+		for ( ; count > 3; count -= 4) {
+			*(volatile u32 *)to = *(u32 *)from;
+			to += 4;
+			from += 4;
+		}
+	}
+
+	for (; count > 0; count--) {
+		*(volatile u8 *)to = *(u8 *)from;
+		to++;
+		from++;
+	}
+
+	mb();
 }
 EXPORT_SYMBOL(memcpy_toio);
 
@@ -62,6 +113,8 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count)
 }
 EXPORT_SYMBOL(memset_io);
 
+#ifndef CONFIG_GENERIC_IOMAP
+
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	void __iomem *ret;
@@ -79,3 +132,5 @@ void ioport_unmap(void __iomem *addr)
 	sh_mv.mv_ioport_unmap(addr);
 }
 EXPORT_SYMBOL(ioport_unmap);
+
+#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 5a7f554d9ca1..4ff507239286 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -73,35 +73,19 @@ u32 generic_inl_p(unsigned long port)
 
 void generic_insb(unsigned long port, void *dst, unsigned long count)
 {
-	volatile u8 *port_addr;
-	u8 *buf = dst;
-
-	port_addr = (volatile u8 __force *)__ioport_map(port, 1);
-	while (count--)
-		*buf++ = *port_addr;
+	__raw_readsb(__ioport_map(port, 1), dst, count);
+	dummy_read();
 }
 
 void generic_insw(unsigned long port, void *dst, unsigned long count)
 {
-	volatile u16 *port_addr;
-	u16 *buf = dst;
-
-	port_addr = (volatile u16 __force *)__ioport_map(port, 2);
-	while (count--)
-		*buf++ = *port_addr;
-
+	__raw_readsw(__ioport_map(port, 2), dst, count);
 	dummy_read();
 }
 
 void generic_insl(unsigned long port, void *dst, unsigned long count)
 {
-	volatile u32 *port_addr;
-	u32 *buf = dst;
-
-	port_addr = (volatile u32 __force *)__ioport_map(port, 4);
-	while (count--)
-		*buf++ = *port_addr;
-
+	__raw_readsl(__ioport_map(port, 4), dst, count);
 	dummy_read();
 }
 
@@ -145,37 +129,19 @@ void generic_outl_p(u32 b, unsigned long port)
  */
 void generic_outsb(unsigned long port, const void *src, unsigned long count)
 {
-	volatile u8 *port_addr;
-	const u8 *buf = src;
-
-	port_addr = (volatile u8 __force *)__ioport_map(port, 1);
-
-	while (count--)
-		*port_addr = *buf++;
+	__raw_writesb(__ioport_map(port, 1), src, count);
+	dummy_read();
 }
 
 void generic_outsw(unsigned long port, const void *src, unsigned long count)
 {
-	volatile u16 *port_addr;
-	const u16 *buf = src;
-
-	port_addr = (volatile u16 __force *)__ioport_map(port, 2);
-
-	while (count--)
-		*port_addr = *buf++;
-
+	__raw_writesw(__ioport_map(port, 2), src, count);
 	dummy_read();
 }
 
 void generic_outsl(unsigned long port, const void *src, unsigned long count)
 {
-	volatile u32 *port_addr;
-	const u32 *buf = src;
-
-	port_addr = (volatile u32 __force *)__ioport_map(port, 4);
-	while (count--)
-		*port_addr = *buf++;
-
+	__raw_writesl(__ioport_map(port, 4), src, count);
 	dummy_read();
 }
 
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 77dfecb64373..69be603aa2d7 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -112,14 +112,15 @@ void __iomem *match_trapped_io_handler(struct list_head *list,
 	struct trapped_io *tiop;
 	struct resource *res;
 	int k, len;
+	unsigned long flags;
 
-	spin_lock_irq(&trapped_lock);
+	spin_lock_irqsave(&trapped_lock, flags);
 	list_for_each_entry(tiop, list, list) {
 		voffs = 0;
 		for (k = 0; k < tiop->num_resources; k++) {
 			res = tiop->resource + k;
 			if (res->start == offset) {
-				spin_unlock_irq(&trapped_lock);
+				spin_unlock_irqrestore(&trapped_lock, flags);
 				return tiop->virt_base + voffs;
 			}
 
@@ -127,7 +128,7 @@ void __iomem *match_trapped_io_handler(struct list_head *list,
 			voffs += roundup(len, PAGE_SIZE);
 		}
 	}
-	spin_unlock_irq(&trapped_lock);
+	spin_unlock_irqrestore(&trapped_lock, flags);
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(match_trapped_io_handler);
@@ -283,7 +284,8 @@ int handle_trapped_io(struct pt_regs *regs, unsigned long address)
 		return 0;
 	}
 
-	tmp = handle_unaligned_access(instruction, regs, &trapped_io_access);
+	tmp = handle_unaligned_access(instruction, regs,
+				      &trapped_io_access, 1);
 	set_fs(oldfs);
 	return tmp == 0;
 }
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 3d09062f4682..60f8af4497c7 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -114,24 +114,7 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
 
 	irq_enter();
-
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-	/* Debugging check for stack overflow: is there less than 1KB free? */
-	{
-		long sp;
-
-		__asm__ __volatile__ ("and r15, %0" :
-					"=r" (sp) : "0" (THREAD_SIZE - 1));
-
-		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
-			printk("do_IRQ: stack overflow: %ld\n",
-			       sp - sizeof(struct thread_info));
-			dump_stack();
-		}
-	}
-#endif
-
-	irq = irq_demux(intc_evt2irq(irq));
+	irq = irq_demux(irq);
 
 #ifdef CONFIG_IRQSTACKS
 	curctx = (union irq_ctx *)current_thread_info();
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index 305aad742aec..3e532d0d4a5c 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -15,8 +15,6 @@
 #include <linux/io.h>
 #include <asm/cacheflush.h>
 
-char in_nmi = 0;	/* Set during NMI to prevent re-entry */
-
 /* Macros for single step instruction identification */
 #define OPCODE_BT(op)		(((op) & 0xff00) == 0x8900)
 #define OPCODE_BF(op)		(((op) & 0xff00) == 0x8b00)
@@ -195,8 +193,6 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->gbr = gdb_regs[GDB_GBR];
 	regs->mach = gdb_regs[GDB_MACH];
 	regs->macl = gdb_regs[GDB_MACL];
-
-	__asm__ __volatile__ ("ldc %0, vbr" : : "r" (gdb_regs[GDB_VBR]));
 }
 
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
diff --git a/arch/sh/kernel/localtimer.c b/arch/sh/kernel/localtimer.c
index 96e8eaea1e62..0b04e7d4a9b9 100644
--- a/arch/sh/kernel/localtimer.c
+++ b/arch/sh/kernel/localtimer.c
@@ -22,6 +22,7 @@
 #include <linux/jiffies.h>
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
+#include <linux/hardirq.h>
 #include <linux/irq.h>
 
 static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
@@ -33,7 +34,9 @@ void local_timer_interrupt(void)
 {
 	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
 
+	irq_enter();
 	clk->event_handler(clk);
+	irq_exit();
 }
 
 static void dummy_timer_set_mode(enum clock_event_mode mode,
@@ -46,8 +49,10 @@ void __cpuinit local_timer_setup(unsigned int cpu)
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
 	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 200;
+	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DUMMY;
+	clk->rating		= 400;
 	clk->mult		= 1;
 	clk->set_mode		= dummy_timer_set_mode;
 	clk->broadcast		= smp_timer_broadcast;
diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c
new file mode 100644
index 000000000000..ff0abbd1e652
--- /dev/null
+++ b/arch/sh/kernel/nmi_debug.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h>
+
+enum nmi_action {
+	NMI_SHOW_STATE	= 1 << 0,
+	NMI_SHOW_REGS	= 1 << 1,
+	NMI_DIE		= 1 << 2,
+	NMI_DEBOUNCE	= 1 << 3,
+};
+
+static unsigned long nmi_actions;
+
+static int nmi_debug_notify(struct notifier_block *self,
+		unsigned long val, void *data)
+{
+	struct die_args *args = data;
+
+	if (likely(val != DIE_NMI))
+		return NOTIFY_DONE;
+
+	if (nmi_actions & NMI_SHOW_STATE)
+		show_state();
+	if (nmi_actions & NMI_SHOW_REGS)
+		show_regs(args->regs);
+	if (nmi_actions & NMI_DEBOUNCE)
+		mdelay(10);
+	if (nmi_actions & NMI_DIE)
+		return NOTIFY_BAD;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block nmi_debug_nb = {
+	.notifier_call = nmi_debug_notify,
+};
+
+static int __init nmi_debug_setup(char *str)
+{
+	char *p, *sep;
+
+	register_die_notifier(&nmi_debug_nb);
+
+	if (*str != '=')
+		return 0;
+
+	for (p = str + 1; *p; p = sep + 1) {
+		sep = strchr(p, ',');
+		if (sep)
+			*sep = 0;
+		if (strcmp(p, "state") == 0)
+			nmi_actions |= NMI_SHOW_STATE;
+		else if (strcmp(p, "regs") == 0)
+			nmi_actions |= NMI_SHOW_REGS;
+		else if (strcmp(p, "debounce") == 0)
+			nmi_actions |= NMI_DEBOUNCE;
+		else if (strcmp(p, "die") == 0)
+			nmi_actions |= NMI_DIE;
+		else
+			printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
+				p);
+		if (!sep)
+			break;
+	}
+
+	return 0;
+}
+__setup("nmi_debug", nmi_debug_setup);
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 92d7740faab1..0673c4746be3 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -23,6 +23,7 @@
 #include <linux/tick.h>
 #include <linux/reboot.h>
 #include <linux/fs.h>
+#include <linux/ftrace.h>
 #include <linux/preempt.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
@@ -31,15 +32,35 @@
 #include <asm/ubc.h>
 #include <asm/fpu.h>
 #include <asm/syscalls.h>
+#include <asm/watchdog.h>
 
 int ubc_usercnt = 0;
 
+#ifdef CONFIG_32BIT
+static void watchdog_trigger_immediate(void)
+{
+	sh_wdt_write_cnt(0xFF);
+	sh_wdt_write_csr(0xC2);
+}
+
+void machine_restart(char * __unused)
+{
+	local_irq_disable();
+
+	/* Use watchdog timer to trigger reset */
+	watchdog_trigger_immediate();
+
+	while (1)
+		cpu_sleep();
+}
+#else
 void machine_restart(char * __unused)
 {
 	/* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
 	asm volatile("ldc %0, sr\n\t"
 		     "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
 }
+#endif
 
 void machine_halt(void)
 {
@@ -264,8 +285,8 @@ static void ubc_set_tracing(int asid, unsigned long pc)
  *	switch_to(x,y) should switch tasks from x to y.
  *
  */
-struct task_struct *__switch_to(struct task_struct *prev,
-				struct task_struct *next)
+__notrace_funcgraph struct task_struct *
+__switch_to(struct task_struct *prev, struct task_struct *next)
 {
 #if defined(CONFIG_SH_FPU)
 	unlazy_fpu(prev, task_pt_regs(prev));
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 24de74214940..1192398ef582 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -425,7 +425,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		struct task_struct *p, struct pt_regs *regs)
 {
 	struct pt_regs *childregs;
-	unsigned long long se;			/* Sign extension */
 
 #ifdef CONFIG_SH_FPU
 	if(last_task_used_math == current) {
@@ -441,11 +440,19 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 
 	*childregs = *regs;
 
+	/*
+	 * Sign extend the edited stack.
+	 * Note that thread.pc and thread.pc will stay
+	 * 32-bit wide and context switch must take care
+	 * of NEFF sign extension.
+	 */
 	if (user_mode(regs)) {
-		childregs->regs[15] = usp;
+		childregs->regs[15] = neff_sign_extend(usp);
 		p->thread.uregs = childregs;
 	} else {
-		childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE;
+		childregs->regs[15] =
+			neff_sign_extend((unsigned long)task_stack_page(p) +
+					 THREAD_SIZE);
 	}
 
 	childregs->regs[9] = 0; /* Set return value for child */
@@ -454,17 +461,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	p->thread.sp = (unsigned long) childregs;
 	p->thread.pc = (unsigned long) ret_from_fork;
 
-	/*
-	 * Sign extend the edited stack.
-         * Note that thread.pc and thread.pc will stay
-	 * 32-bit wide and context switch must take care
-	 * of NEFF sign extension.
-	 */
-
-	se = childregs->regs[15];
-	se = (se & NEFF_SIGN) ? (se | NEFF_MASK) : se;
-	childregs->regs[15] = se;
-
 	return 0;
 }
 
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 3392e835a374..9be35f348093 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -34,6 +34,9 @@
 #include <asm/syscalls.h>
 #include <asm/fpu.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 /*
  * This routine will get a word off of the process kernel stack.
  */
@@ -459,6 +462,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1L;
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[0]);
+
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[3],
 				    regs->regs[4], regs->regs[5],
@@ -475,6 +481,9 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
 				   regs->regs[0]);
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[0]);
+
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, step);
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index 695097438f02..952da83903da 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -40,6 +40,9 @@
 #include <asm/syscalls.h>
 #include <asm/fpu.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 /* This mask defines the bits of the SR which the user is not allowed to
    change, which are everything except S, Q, M, PR, SZ, FR. */
 #define SR_MASK      (0xffff8cfd)
@@ -438,6 +441,9 @@ asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1LL;
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[9]);
+
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[1],
 				    regs->regs[2], regs->regs[3],
@@ -452,6 +458,9 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
 				   regs->regs[9]);
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[9]);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index dd38338553ef..f9d44f8e0df6 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -30,6 +30,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/lmb.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -48,6 +49,7 @@
 struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
 	[0] = {
 		.type			= CPU_SH_NONE,
+		.family			= CPU_FAMILY_UNKNOWN,
 		.loops_per_jiffy	= 10000000,
 	},
 };
@@ -233,39 +235,45 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 void __init setup_bootmem_allocator(unsigned long free_pfn)
 {
 	unsigned long bootmap_size;
+	unsigned long bootmap_pages, bootmem_paddr;
+	u64 total_pages = (lmb_end_of_DRAM() - __MEMORY_START) >> PAGE_SHIFT;
+	int i;
+
+	bootmap_pages = bootmem_bootmap_pages(total_pages);
+
+	bootmem_paddr = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
 
 	/*
 	 * Find a proper area for the bootmem bitmap. After this
 	 * bootstrap step all allocations (until the page allocator
 	 * is intact) must be done via bootmem_alloc().
 	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn,
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+					 bootmem_paddr >> PAGE_SHIFT,
 					 min_low_pfn, max_low_pfn);
 
-	__add_active_range(0, min_low_pfn, max_low_pfn);
-	register_bootmem_low_pages();
-
-	node_set_online(0);
+	/* Add active regions with valid PFNs. */
+	for (i = 0; i < lmb.memory.cnt; i++) {
+		unsigned long start_pfn, end_pfn;
+		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		__add_active_range(0, start_pfn, end_pfn);
+	}
 
 	/*
-	 * Reserve the kernel text and
-	 * Reserve the bootmem bitmap. We do this in two steps (first step
-	 * was init_bootmem()), because this catches the (definitely buggy)
-	 * case of us accidentally initializing the bootmem allocator with
-	 * an invalid RAM area.
+	 * Add all physical memory to the bootmem map and mark each
+	 * area as present.
 	 */
-	reserve_bootmem(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
-			(PFN_PHYS(free_pfn) + bootmap_size + PAGE_SIZE - 1) -
-			(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET),
-			BOOTMEM_DEFAULT);
+	register_bootmem_low_pages();
 
-	/*
-	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
-	 */
-	if (CONFIG_ZERO_PAGE_OFFSET != 0)
-		reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
+	/* Reserve the sections we're already using. */
+	for (i = 0; i < lmb.reserved.cnt; i++)
+		reserve_bootmem(lmb.reserved.region[i].base,
+				lmb_size_bytes(&lmb.reserved, i),
 				BOOTMEM_DEFAULT);
 
+	node_set_online(0);
+
 	sparse_memory_present_with_active_regions(0);
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -296,12 +304,37 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
 static void __init setup_memory(void)
 {
 	unsigned long start_pfn;
+	u64 base = min_low_pfn << PAGE_SHIFT;
+	u64 size = (max_low_pfn << PAGE_SHIFT) - base;
 
 	/*
 	 * Partially used pages are not usable - thus
 	 * we are rounding upwards:
 	 */
 	start_pfn = PFN_UP(__pa(_end));
+
+	lmb_add(base, size);
+
+	/*
+	 * Reserve the kernel text and
+	 * Reserve the bootmem bitmap. We do this in two steps (first step
+	 * was init_bootmem()), because this catches the (definitely buggy)
+	 * case of us accidentally initializing the bootmem allocator with
+	 * an invalid RAM area.
+	 */
+	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+		    (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
+		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
+
+	/*
+	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
+	 */
+	if (CONFIG_ZERO_PAGE_OFFSET != 0)
+		lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+
+	lmb_analyze();
+	lmb_dump_all();
+
 	setup_bootmem_allocator(start_pfn);
 }
 #else
@@ -372,10 +405,14 @@ void __init setup_arch(char **cmdline_p)
 	if (!memory_end)
 		memory_end = memory_start + __MEMORY_SIZE;
 
-#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERWRITE
 	strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
 #else
 	strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
+#ifdef CONFIG_CMDLINE_EXTEND
+	strlcat(command_line, " ", sizeof(command_line));
+	strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#endif
 #endif
 
 	/* Save unparsed command line copy for /proc/cmdline */
@@ -402,6 +439,7 @@ void __init setup_arch(char **cmdline_p)
 	nodes_clear(node_online_map);
 
 	/* Setup bootmem with available RAM */
+	lmb_init();
 	setup_memory();
 	sparse_init();
 
@@ -448,7 +486,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
 	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
 	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
-	[CPU_SH7786]	= "SH7786",
+	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
 	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index fcc5de31f83b..8dbe26b17c44 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -101,20 +101,14 @@ EXPORT_SYMBOL(flush_cache_range);
 EXPORT_SYMBOL(flush_dcache_page);
 #endif
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
-	(defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB))
-EXPORT_SYMBOL(clear_user_page);
-#endif
-
-#ifdef CONFIG_FUNCTION_TRACER
-EXPORT_SYMBOL(mcount);
+#ifdef CONFIG_MCOUNT
+DECLARE_EXPORT(mcount);
 #endif
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
 #ifdef CONFIG_IPV6
 EXPORT_SYMBOL(csum_ipv6_magic);
 #endif
-EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(_ebss);
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index f5bd156ea504..d008e17eb257 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -30,14 +30,6 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
 EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(kernel_thread);
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU)
-EXPORT_SYMBOL(clear_user_page);
-#endif
-
-#ifndef CONFIG_CACHE_OFF
-EXPORT_SYMBOL(flush_dcache_page);
-#endif
-
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(screen_info);
 #endif
@@ -52,7 +44,6 @@ EXPORT_SYMBOL(__get_user_asm_l);
 EXPORT_SYMBOL(__get_user_asm_q);
 EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 04a21883f327..6729703547a1 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -41,6 +41,16 @@ struct fdpic_func_descriptor {
 };
 
 /*
+ * The following define adds a 64 byte gap between the signal
+ * stack frame and previous contents of the stack.  This allows
+ * frame unwinding in a function epilogue but only if a frame
+ * pointer is used in the function.  This is necessary because
+ * current gcc compilers (<4.3) do not generate unwind info on
+ * SH for function epilogues.
+ */
+#define UNWINDGUARD 64
+
+/*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
 asmlinkage int
@@ -327,7 +337,7 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
-	return (void __user *)((sp - frame_size) & -8ul);
+	return (void __user *)((sp - (frame_size+UNWINDGUARD)) & -8ul);
 }
 
 /* These symbols are defined with the addresses in the vsyscall page.
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 9e5c9b1d7e98..74793c80a57a 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -561,13 +561,11 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1;
-
 		/*
 		 * On SH5 all edited pointers are subject to NEFF
 		 */
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			ka->sa.sa_restorer | 0x1);
 	} else {
 		/*
 		 * Different approach on SH5.
@@ -580,9 +578,8 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 		 * . being code, linker turns ShMedia bit on, always
 		 *   dereference index -1.
 		 */
-		DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			frame->retcode | 0x01);
 
 		if (__copy_to_user(frame->retcode,
 			(void *)((unsigned long)sa_default_restorer & (~1)), 16) != 0)
@@ -596,9 +593,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	 * Set up registers for signal handler.
 	 * All edited pointers are subject to NEFF.
 	 */
-	regs->regs[REG_SP] = (unsigned long) frame;
-	regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
-		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
 	regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
 
         /* FIXME:
@@ -613,8 +608,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
 	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
 
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-	regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc;
+	regs->pc = neff_sign_extend((unsigned long)ka->sa.sa_handler);
 
 	set_fs(USER_DS);
 
@@ -676,13 +670,11 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1;
-
 		/*
 		 * On SH5 all edited pointers are subject to NEFF
 		 */
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			ka->sa.sa_restorer | 0x1);
 	} else {
 		/*
 		 * Different approach on SH5.
@@ -695,15 +687,14 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		 * . being code, linker turns ShMedia bit on, always
 		 *   dereference index -1.
 		 */
-
-		DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			frame->retcode | 0x01);
 
 		if (__copy_to_user(frame->retcode,
 			(void *)((unsigned long)sa_default_rt_restorer & (~1)), 16) != 0)
 			goto give_sigsegv;
 
+		/* Cohere the trampoline with the I-cache. */
 		flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15);
 	}
 
@@ -711,14 +702,11 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 * Set up registers for signal handler.
 	 * All edited pointers are subject to NEFF.
 	 */
-	regs->regs[REG_SP] = (unsigned long) frame;
-	regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
-		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
 	regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
 	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info;
 	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-	regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc;
+	regs->pc = neff_sign_extend((unsigned long)ka->sa.sa_handler);
 
 	set_fs(USER_DS);
 
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 1a2a5eb76e41..c2e45c48409c 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -13,47 +13,93 @@
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>
+#include <asm/unwinder.h>
 #include <asm/ptrace.h>
+#include <asm/stacktrace.h>
+
+static void save_stack_warning(void *data, char *msg)
+{
+}
+
+static void
+save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+}
+
+static int save_stack_stack(void *data, char *name)
+{
+	return 0;
+}
 
 /*
  * Save stack-backtrace addresses into a stack_trace buffer.
  */
+static void save_stack_address(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = data;
+
+	if (!reliable)
+		return;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops = {
+	.warning = save_stack_warning,
+	.warning_symbol = save_stack_warning_symbol,
+	.stack = save_stack_stack,
+	.address = save_stack_address,
+};
+
 void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)current_stack_pointer;
 
-	while (!kstack_end(sp)) {
-		unsigned long addr = *sp++;
-
-		if (__kernel_text_address(addr)) {
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	unwind_stack(current, NULL, sp,  &save_stack_ops, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
+static void
+save_stack_address_nosched(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = (struct stack_trace *)data;
+
+	if (!reliable)
+		return;
+
+	if (in_sched_functions(addr))
+		return;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops_nosched = {
+	.warning = save_stack_warning,
+	.warning_symbol = save_stack_warning_symbol,
+	.stack = save_stack_stack,
+	.address = save_stack_address_nosched,
+};
+
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)tsk->thread.sp;
 
-	while (!kstack_end(sp)) {
-		unsigned long addr = *sp++;
-
-		if (__kernel_text_address(addr)) {
-			if (in_sched_functions(addr))
-				break;
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	unwind_stack(current, NULL, sp,  &save_stack_ops_nosched, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 90d00e47264d..8aa5d1ceaf14 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -25,6 +25,8 @@
 #include <asm/syscalls.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
+#include <asm/cacheflush.h>
+#include <asm/cachectl.h>
 
 static inline long
 do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
@@ -179,6 +181,47 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	return -EINVAL;
 }
 
+/* sys_cacheflush -- flush (part of) the processor cache.  */
+asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
+{
+	struct vm_area_struct *vma;
+
+	if ((op <= 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
+		return -EINVAL;
+
+	/*
+	 * Verify that the specified address region actually belongs
+	 * to this process.
+	 */
+	if (addr + len < addr)
+		return -EFAULT;
+
+	down_read(&current->mm->mmap_sem);
+	vma = find_vma (current->mm, addr);
+	if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) {
+		up_read(&current->mm->mmap_sem);
+		return -EFAULT;
+	}
+
+	switch (op & CACHEFLUSH_D_PURGE) {
+		case CACHEFLUSH_D_INVAL:
+			__flush_invalidate_region((void *)addr, len);
+			break;
+		case CACHEFLUSH_D_WB:
+			__flush_wback_region((void *)addr, len);
+			break;
+		case CACHEFLUSH_D_PURGE:
+			__flush_purge_region((void *)addr, len);
+			break;
+	}
+
+	if (op & CACHEFLUSH_I)
+		flush_cache_all();
+
+	up_read(&current->mm->mmap_sem);
+	return 0;
+}
+
 asmlinkage int sys_uname(struct old_utsname __user *name)
 {
 	int err;
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index f9e21fa2f592..16ba225ede89 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -139,7 +139,7 @@ ENTRY(sys_call_table)
 	.long sys_clone		/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
-	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_cacheflush	/* x86: sys_modify_ldt */
 	.long sys_adjtimex
 	.long sys_mprotect		/* 125 */
 	.long sys_sigprocmask
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index bf420b616ae0..af6fb7410c21 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -143,7 +143,7 @@ sys_call_table:
 	.long sys_clone			/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
-	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_cacheflush	/* x86: sys_modify_ldt */
 	.long sys_adjtimex
 	.long sys_mprotect		/* 125 */
 	.long sys_sigprocmask
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 9b352a1e3fb4..953fa1613312 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/rtc.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
 #include <asm/rtc.h>
 
 /* Dummy RTC ops */
@@ -39,11 +40,9 @@ void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
 int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
 
 #ifdef CONFIG_GENERIC_CMOS_UPDATE
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	struct timespec tv;
-	rtc_sh_get_time(&tv);
-	return tv.tv_sec;
+	rtc_sh_get_time(ts);
 }
 
 int update_persistent_clock(struct timespec now)
@@ -91,21 +90,8 @@ module_init(rtc_generic_init);
 
 void (*board_time_init)(void);
 
-void __init time_init(void)
+static void __init sh_late_time_init(void)
 {
-	if (board_time_init)
-		board_time_init();
-
-	clk_init();
-
-	rtc_sh_get_time(&xtime);
-	set_normalized_timespec(&wall_to_monotonic,
-				-xtime.tv_sec, -xtime.tv_nsec);
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	local_timer_setup(smp_processor_id());
-#endif
-
 	/*
 	 * Make sure all compiled-in early timers register themselves.
 	 *
@@ -118,3 +104,18 @@ void __init time_init(void)
 	early_platform_driver_register_all("earlytimer");
 	early_platform_driver_probe("earlytimer", 2, 0);
 }
+
+void __init time_init(void)
+{
+	if (board_time_init)
+		board_time_init();
+
+	hwblk_init();
+	clk_init();
+
+	rtc_sh_get_time(&xtime);
+	set_normalized_timespec(&wall_to_monotonic,
+				-xtime.tv_sec, -xtime.tv_nsec);
+
+	late_time_init = sh_late_time_init;
+}
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index b3e0067db358..a8396f36bd14 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -5,18 +5,33 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
+#include <linux/hardirq.h>
+#include <asm/unwinder.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_BUG
-static void handle_BUG(struct pt_regs *regs)
+void handle_BUG(struct pt_regs *regs)
 {
+	const struct bug_entry *bug;
+	unsigned long bugaddr = regs->pc;
 	enum bug_trap_type tt;
-	tt = report_bug(regs->pc, regs);
+
+	if (!is_valid_bugaddr(bugaddr))
+		goto invalid;
+
+	bug = find_bug(bugaddr);
+
+	/* Switch unwinders when unwind_stack() is called */
+	if (bug->flags & BUGFLAG_UNWINDER)
+		unwinder_faulted = 1;
+
+	tt = report_bug(bugaddr, regs);
 	if (tt == BUG_TRAP_TYPE_WARN) {
-		regs->pc += instruction_size(regs->pc);
+		regs->pc += instruction_size(bugaddr);
 		return;
 	}
 
+invalid:
 	die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
 }
 
@@ -28,8 +43,10 @@ int is_valid_bugaddr(unsigned long addr)
 		return 0;
 	if (probe_kernel_address((insn_size_t *)addr, opcode))
 		return 0;
+	if (opcode == TRAPA_BUG_OPCODE)
+		return 1;
 
-	return opcode == TRAPA_BUG_OPCODE;
+	return 0;
 }
 #endif
 
@@ -75,3 +92,23 @@ BUILD_TRAP_HANDLER(bug)
 
 	force_sig(SIGTRAP, current);
 }
+
+BUILD_TRAP_HANDLER(nmi)
+{
+	TRAP_HANDLER_DECL;
+
+	nmi_enter();
+
+	switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
+	case NOTIFY_OK:
+	case NOTIFY_STOP:
+		break;
+	case NOTIFY_BAD:
+		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
+	default:
+		printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n");
+		break;
+	}
+
+	nmi_exit();
+}
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 2b772776fcda..6aba9af79eaf 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -24,6 +24,7 @@
 #include <linux/kdebug.h>
 #include <linux/kexec.h>
 #include <linux/limits.h>
+#include <linux/proc_fs.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/fpu.h>
@@ -44,6 +45,85 @@
 #define TRAP_ILLEGAL_SLOT_INST	13
 #endif
 
+static unsigned long se_user;
+static unsigned long se_sys;
+static unsigned long se_half;
+static unsigned long se_word;
+static unsigned long se_dword;
+static unsigned long se_multi;
+/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
+   valid! */
+static int se_usermode = 3;
+/* 0: no warning 1: print a warning message */
+static int se_kernmode_warn = 1;
+
+#ifdef CONFIG_PROC_FS
+static const char *se_usermode_action[] = {
+	"ignored",
+	"warn",
+	"fixup",
+	"fixup+warn",
+	"signal",
+	"signal+warn"
+};
+
+static int
+proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
+		    void *data)
+{
+	char *p = page;
+	int len;
+
+	p += sprintf(p, "User:\t\t%lu\n", se_user);
+	p += sprintf(p, "System:\t\t%lu\n", se_sys);
+	p += sprintf(p, "Half:\t\t%lu\n", se_half);
+	p += sprintf(p, "Word:\t\t%lu\n", se_word);
+	p += sprintf(p, "DWord:\t\t%lu\n", se_dword);
+	p += sprintf(p, "Multi:\t\t%lu\n", se_multi);
+	p += sprintf(p, "User faults:\t%i (%s)\n", se_usermode,
+			se_usermode_action[se_usermode]);
+	p += sprintf(p, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
+			se_kernmode_warn ? "+warn" : "");
+
+	len = (p - page) - off;
+	if (len < 0)
+		len = 0;
+
+	*eof = (len <= count) ? 1 : 0;
+	*start = page + off;
+
+	return len;
+}
+
+static int proc_alignment_write(struct file *file, const char __user *buffer,
+				unsigned long count, void *data)
+{
+	char mode;
+
+	if (count > 0) {
+		if (get_user(mode, buffer))
+			return -EFAULT;
+		if (mode >= '0' && mode <= '5')
+			se_usermode = mode - '0';
+	}
+	return count;
+}
+
+static int proc_alignment_kern_write(struct file *file, const char __user *buffer,
+				     unsigned long count, void *data)
+{
+	char mode;
+
+	if (count > 0) {
+		if (get_user(mode, buffer))
+			return -EFAULT;
+		if (mode >= '0' && mode <= '1')
+			se_kernmode_warn = mode - '0';
+	}
+	return count;
+}
+#endif
+
 static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 {
 	unsigned long p;
@@ -136,6 +216,7 @@ static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
 			regs->pc = fixup->fixup;
 			return;
 		}
+
 		die(str, regs, err);
 	}
 }
@@ -193,6 +274,13 @@ static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
 
 	count = 1<<(instruction&3);
 
+	switch (count) {
+	case 1: se_half  += 1; break;
+	case 2: se_word  += 1; break;
+	case 4: se_dword += 1; break;
+	case 8: se_multi += 1; break; /* ??? */
+	}
+
 	ret = -EFAULT;
 	switch (instruction>>12) {
 	case 0: /* mov.[bwl] to/from memory via r0+rn */
@@ -358,15 +446,8 @@ static inline int handle_delayslot(struct pt_regs *regs,
 #define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
 #define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
 
-/*
- * XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit
- * opcodes..
- */
-
-static int handle_unaligned_notify_count = 10;
-
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
-			    struct mem_access *ma)
+			    struct mem_access *ma, int expected)
 {
 	u_int rm;
 	int ret, index;
@@ -374,15 +455,13 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 	index = (instruction>>8)&15;	/* 0x0F00 */
 	rm = regs->regs[index];
 
-	/* shout about the first ten userspace fixups */
-	if (user_mode(regs) && handle_unaligned_notify_count>0) {
-		handle_unaligned_notify_count--;
-
-		printk(KERN_NOTICE "Fixing up unaligned userspace access "
+	/* shout about fixups */
+	if (!expected && printk_ratelimit())
+		printk(KERN_NOTICE "Fixing up unaligned %s access "
 		       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+		       user_mode(regs) ? "userspace" : "kernel",
 		       current->comm, task_pid_nr(current),
 		       (void *)regs->pc, instruction);
-	}
 
 	ret = -EFAULT;
 	switch (instruction&0xF000) {
@@ -538,6 +617,36 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 		local_irq_enable();
 
+		se_user += 1;
+
+#ifndef CONFIG_CPU_SH2A
+		set_fs(USER_DS);
+		if (copy_from_user(&instruction, (u16 *)(regs->pc & ~1), 2)) {
+			set_fs(oldfs);
+			goto uspace_segv;
+		}
+		set_fs(oldfs);
+
+		/* shout about userspace fixups */
+		if (se_usermode & 1)
+			printk(KERN_NOTICE "Unaligned userspace access "
+			       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			       current->comm, current->pid, (void *)regs->pc,
+			       instruction);
+#endif
+
+		if (se_usermode & 2)
+			goto fixup;
+
+		if (se_usermode & 4)
+			goto uspace_segv;
+		else {
+			/* ignore */
+			regs->pc += instruction_size(instruction);
+			return;
+		}
+
+fixup:
 		/* bad PC is not something we can fix */
 		if (regs->pc & 1) {
 			si_code = BUS_ADRALN;
@@ -545,17 +654,8 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 		}
 
 		set_fs(USER_DS);
-		if (copy_from_user(&instruction, (void __user *)(regs->pc),
-				   sizeof(instruction))) {
-			/* Argh. Fault on the instruction itself.
-			   This should never happen non-SMP
-			*/
-			set_fs(oldfs);
-			goto uspace_segv;
-		}
-
 		tmp = handle_unaligned_access(instruction, regs,
-					      &user_mem_access);
+					      &user_mem_access, 0);
 		set_fs(oldfs);
 
 		if (tmp==0)
@@ -571,6 +671,14 @@ uspace_segv:
 		info.si_addr = (void __user *)address;
 		force_sig_info(SIGBUS, &info, current);
 	} else {
+		se_sys += 1;
+
+		if (se_kernmode_warn)
+			printk(KERN_NOTICE "Unaligned kernel access "
+			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			       current->comm, current->pid, (void *)regs->pc,
+			       instruction);
+
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
 
@@ -584,7 +692,8 @@ uspace_segv:
 			die("insn faulting in do_address_error", regs, 0);
 		}
 
-		handle_unaligned_access(instruction, regs, &user_mem_access);
+		handle_unaligned_access(instruction, regs,
+					&user_mem_access, 0);
 		set_fs(oldfs);
 	}
 }
@@ -858,30 +967,6 @@ void __init trap_init(void)
 	per_cpu_trap_init();
 }
 
-void show_trace(struct task_struct *tsk, unsigned long *sp,
-		struct pt_regs *regs)
-{
-	unsigned long addr;
-
-	if (regs && user_mode(regs))
-		return;
-
-	printk("\nCall trace:\n");
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
-	}
-
-	printk("\n");
-
-	if (!tsk)
-		tsk = current;
-
-	debug_show_held_locks(tsk);
-}
-
 void show_stack(struct task_struct *tsk, unsigned long *sp)
 {
 	unsigned long stack;
@@ -904,3 +989,38 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_PROC_FS
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten.  Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ * We now locate it in /proc/cpu/alignment instead.
+ */
+static int __init alignment_init(void)
+{
+	struct proc_dir_entry *dir, *res;
+
+	dir = proc_mkdir("cpu", NULL);
+	if (!dir)
+		return -ENOMEM;
+
+	res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, dir);
+	if (!res)
+		return -ENOMEM;
+
+	res->read_proc = proc_alignment_read;
+	res->write_proc = proc_alignment_write;
+
+        res = create_proc_entry("kernel_alignment", S_IWUSR | S_IRUGO, dir);
+        if (!res)
+                return -ENOMEM;
+
+        res->read_proc = proc_alignment_read;
+        res->write_proc = proc_alignment_kern_write;
+
+	return 0;
+}
+
+fs_initcall(alignment_init);
+#endif
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
new file mode 100644
index 000000000000..468889d958f4
--- /dev/null
+++ b/arch/sh/kernel/unwinder.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based, in part, on kernel/time/clocksource.c.
+ *
+ * This file provides arbitration code for stack unwinders.
+ *
+ * Multiple stack unwinders can be available on a system, usually with
+ * the most accurate unwinder being the currently active one.
+ */
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <asm/unwinder.h>
+#include <asm/atomic.h>
+
+/*
+ * This is the most basic stack unwinder an architecture can
+ * provide. For architectures without reliable frame pointers, e.g.
+ * RISC CPUs, it can be implemented by looking through the stack for
+ * addresses that lie within the kernel text section.
+ *
+ * Other CPUs, e.g. x86, can use their frame pointer register to
+ * construct more accurate stack traces.
+ */
+static struct list_head unwinder_list;
+static struct unwinder stack_reader = {
+	.name = "stack-reader",
+	.dump = stack_reader_dump,
+	.rating = 50,
+	.list = {
+		.next = &unwinder_list,
+		.prev = &unwinder_list,
+	},
+};
+
+/*
+ * "curr_unwinder" points to the stack unwinder currently in use. This
+ * is the unwinder with the highest rating.
+ *
+ * "unwinder_list" is a linked-list of all available unwinders, sorted
+ * by rating.
+ *
+ * All modifications of "curr_unwinder" and "unwinder_list" must be
+ * performed whilst holding "unwinder_lock".
+ */
+static struct unwinder *curr_unwinder = &stack_reader;
+
+static struct list_head unwinder_list = {
+	.next = &stack_reader.list,
+	.prev = &stack_reader.list,
+};
+
+static DEFINE_SPINLOCK(unwinder_lock);
+
+/**
+ * select_unwinder - Select the best registered stack unwinder.
+ *
+ * Private function. Must hold unwinder_lock when called.
+ *
+ * Select the stack unwinder with the best rating. This is useful for
+ * setting up curr_unwinder.
+ */
+static struct unwinder *select_unwinder(void)
+{
+	struct unwinder *best;
+
+	if (list_empty(&unwinder_list))
+		return NULL;
+
+	best = list_entry(unwinder_list.next, struct unwinder, list);
+	if (best == curr_unwinder)
+		return NULL;
+
+	return best;
+}
+
+/*
+ * Enqueue the stack unwinder sorted by rating.
+ */
+static int unwinder_enqueue(struct unwinder *ops)
+{
+	struct list_head *tmp, *entry = &unwinder_list;
+
+	list_for_each(tmp, &unwinder_list) {
+		struct unwinder *o;
+
+		o = list_entry(tmp, struct unwinder, list);
+		if (o == ops)
+			return -EBUSY;
+		/* Keep track of the place, where to insert */
+		if (o->rating >= ops->rating)
+			entry = tmp;
+	}
+	list_add(&ops->list, entry);
+
+	return 0;
+}
+
+/**
+ * unwinder_register - Used to install new stack unwinder
+ * @u: unwinder to be registered
+ *
+ * Install the new stack unwinder on the unwinder list, which is sorted
+ * by rating.
+ *
+ * Returns -EBUSY if registration fails, zero otherwise.
+ */
+int unwinder_register(struct unwinder *u)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&unwinder_lock, flags);
+	ret = unwinder_enqueue(u);
+	if (!ret)
+		curr_unwinder = select_unwinder();
+	spin_unlock_irqrestore(&unwinder_lock, flags);
+
+	return ret;
+}
+
+int unwinder_faulted = 0;
+
+/*
+ * Unwind the call stack and pass information to the stacktrace_ops
+ * functions. Also handle the case where we need to switch to a new
+ * stack dumper because the current one faulted unexpectedly.
+ */
+void unwind_stack(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
+{
+	unsigned long flags;
+
+	/*
+	 * The problem with unwinders with high ratings is that they are
+	 * inherently more complicated than the simple ones with lower
+	 * ratings. We are therefore more likely to fault in the
+	 * complicated ones, e.g. hitting BUG()s. If we fault in the
+	 * code for the current stack unwinder we try to downgrade to
+	 * one with a lower rating.
+	 *
+	 * Hopefully this will give us a semi-reliable stacktrace so we
+	 * can diagnose why curr_unwinder->dump() faulted.
+	 */
+	if (unwinder_faulted) {
+		spin_lock_irqsave(&unwinder_lock, flags);
+
+		/* Make sure no one beat us to changing the unwinder */
+		if (unwinder_faulted && !list_is_singular(&unwinder_list)) {
+			list_del(&curr_unwinder->list);
+			curr_unwinder = select_unwinder();
+
+			unwinder_faulted = 0;
+		}
+
+		spin_unlock_irqrestore(&unwinder_lock, flags);
+	}
+
+	curr_unwinder->dump(task, regs, sp, ops, data);
+}
+EXPORT_SYMBOL_GPL(unwind_stack);
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 0ce254bca92f..a1e4ec24f1f5 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -12,7 +12,7 @@ OUTPUT_ARCH(sh)
 
 #include <asm/thread_info.h>
 #include <asm/cache.h>
-#include <asm-generic/vmlinux.lds.h>
+#include <asm/vmlinux.lds.h>
 
 ENTRY(_start)
 SECTIONS
@@ -50,12 +50,7 @@ SECTIONS
 		_etext = .;		/* End of text section */
 	} = 0x0009
 
-	. = ALIGN(16);		/* Exception table */
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	NOTES
 	RO_DATA(PAGE_SIZE)
@@ -71,69 +66,16 @@ SECTIONS
 		__uncached_end = .;
 	}
 
-	. = ALIGN(THREAD_SIZE);
-	.data : AT(ADDR(.data) - LOAD_OFFSET) {		/* Data */
-		*(.data.init_task)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.cacheline_aligned)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.read_mostly)
-
-		. = ALIGN(PAGE_SIZE);
-		*(.data.page_aligned)
-
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		DATA_DATA
-		CONSTRUCTORS
-	}
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
 	_edata = .;			/* End of data section */
 
-	. = ALIGN(PAGE_SIZE);		/* Init code and data */
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		__init_begin = .;
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-
-	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA }
-
-	. = ALIGN(16);
-	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-
-	SECURITY_INIT
+	DWARF_EH_FRAME
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
+	__init_begin = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 
 	. = ALIGN(4);
 	.machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) {
@@ -152,25 +94,13 @@ SECTIONS
 	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA }
 
 	. = ALIGN(PAGE_SIZE);
-	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-		__init_end = .;
-		__bss_start = .;		/* BSS */
-		*(.bss.page_aligned)
-		*(.bss)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = .;			/* uClinux MTD sucks */
-		_end = . ;
-	}
+	__init_end = .;
+	BSS_SECTION(0, PAGE_SIZE, 4)
+	_ebss = .;			/* uClinux MTD sucks */
+	_end = . ;
 
 	STABS_DEBUG
 	DWARF_DEBUG
 
-	/*
-	 * When something in the kernel is NOT compiled as a module, the
-	 * module cleanup code and data are put into these segments. Both
-	 * can then be thrown away, as cleanup code is never called unless
-	 * it's a module.
-	 */
 	DISCARDS
 }
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index aaea580b65bb..a969b47c5463 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -23,8 +23,8 @@ obj-y				+= io.o
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
-lib-$(CONFIG_MMU)		+= copy_page.o clear_page.o
-lib-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
+lib-$(CONFIG_MMU)		+= copy_page.o __clear_user.o
+lib-$(CONFIG_MCOUNT)		+= mcount.o
 lib-y				+= $(memcpy-y) $(udivsi3-y)
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/lib/clear_page.S b/arch/sh/lib/__clear_user.S
index 8342bfbde64c..db1dca7aad14 100644
--- a/arch/sh/lib/clear_page.S
+++ b/arch/sh/lib/__clear_user.S
@@ -8,56 +8,10 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 
-/*
- * clear_page
- * @to: P1 address
- *
- * void clear_page(void *to)
- */
-
-/*
- * r0 --- scratch
- * r4 --- to
- * r5 --- to + PAGE_SIZE
- */
-ENTRY(clear_page)
-	mov	r4,r5
-	mov.l	.Llimit,r0
-	add	r0,r5
-	mov	#0,r0
-	!
-1:
-#if defined(CONFIG_CPU_SH4)
-	movca.l	r0,@r4
-	mov	r4,r1
-#else
-	mov.l	r0,@r4
-#endif
-	add	#32,r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-#if defined(CONFIG_CPU_SH4)
-	ocbwb	@r1
-#endif
-	cmp/eq	r5,r4
-	bf/s	1b
-	 add	#28,r4
-	!
-	rts
-	 nop
-
-	.balign 4
-.Llimit:	.long	(PAGE_SIZE-28)
-
 ENTRY(__clear_user)
 	!
 	mov	#0, r0
-	mov	#0xe0, r1	! 0xffffffe0
+	mov	#0xffffffe0, r1
 	!
 	! r4..(r4+31)&~32 	   -------- not aligned	[ Area 0 ]
 	! (r4+31)&~32..(r4+r5)&~32 -------- aligned	[ Area 1 ]
diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S
index 43de7e8e4e17..9d7b8bc51866 100644
--- a/arch/sh/lib/copy_page.S
+++ b/arch/sh/lib/copy_page.S
@@ -30,7 +30,9 @@ ENTRY(copy_page)
 	mov	r4,r10
 	mov	r5,r11
 	mov	r5,r8
-	mov.l	.Lpsz,r0
+	mov	#(PAGE_SIZE >> 10), r0
+	shll8	r0
+	shll2	r0
 	add	r0,r8
 	!
 1:	mov.l	@r11+,r0
@@ -43,7 +45,6 @@ ENTRY(copy_page)
 	mov.l	@r11+,r7
 #if defined(CONFIG_CPU_SH4)
 	movca.l	r0,@r10
-	mov	r10,r0
 #else
 	mov.l	r0,@r10
 #endif
@@ -55,9 +56,6 @@ ENTRY(copy_page)
 	mov.l	r3,@-r10
 	mov.l	r2,@-r10
 	mov.l	r1,@-r10
-#if defined(CONFIG_CPU_SH4)
-	ocbwb	@r0
-#endif
 	cmp/eq	r11,r8
 	bf/s	1b
 	 add	#28,r10
@@ -68,9 +66,6 @@ ENTRY(copy_page)
 	rts
 	 nop
 
-	.balign 4
-.Lpsz:	.long	PAGE_SIZE
-
 /*
  * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
  * Return the number of bytes NOT copied
diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
index f3ddd2133e6f..faa8f86c0db4 100644
--- a/arch/sh/lib/delay.c
+++ b/arch/sh/lib/delay.c
@@ -21,13 +21,14 @@ void __delay(unsigned long loops)
 
 inline void __const_udelay(unsigned long xloops)
 {
+	xloops *= 4;
 	__asm__("dmulu.l	%0, %2\n\t"
 		"sts	mach, %0"
 		: "=r" (xloops)
 		: "0" (xloops),
-		  "r" (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy)
+		  "r" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))
 		: "macl", "mach");
-	__delay(xloops);
+	__delay(++xloops);
 }
 
 void __udelay(unsigned long usecs)
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index 110fbfe1831f..84a57761f17e 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -1,14 +1,16 @@
 /*
  * arch/sh/lib/mcount.S
  *
- *  Copyright (C) 2008  Paul Mundt
- *  Copyright (C) 2008  Matt Fleming
+ *  Copyright (C) 2008, 2009  Paul Mundt
+ *  Copyright (C) 2008, 2009  Matt Fleming
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <asm/ftrace.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
 
 #define MCOUNT_ENTER()		\
 	mov.l	r4, @-r15;	\
@@ -28,6 +30,55 @@
 	rts;			\
 	 mov.l	@r15+, r4
 
+#ifdef CONFIG_STACK_DEBUG
+/*
+ * Perform diagnostic checks on the state of the kernel stack.
+ *
+ * Check for stack overflow. If there is less than 1KB free
+ * then it has overflowed.
+ *
+ * Make sure the stack pointer contains a valid address. Valid
+ * addresses for kernel stacks are anywhere after the bss
+ * (after _ebss) and anywhere in init_thread_union (init_stack).
+ */
+#define STACK_CHECK()					\
+	mov	#(THREAD_SIZE >> 10), r0;		\
+	shll8	r0;					\
+	shll2	r0;					\
+							\
+	/* r1 = sp & (THREAD_SIZE - 1) */		\
+	mov	#-1, r1;				\
+	add	r0, r1;					\
+	and	r15, r1;				\
+							\
+	mov	#TI_SIZE, r3;				\
+	mov	#(STACK_WARN >> 8), r2;			\
+	shll8	r2;					\
+	add	r3, r2;					\
+							\
+	/* Is the stack overflowing? */			\
+	cmp/hi	r2, r1;					\
+	bf	stack_panic;				\
+							\
+	/* If sp > _ebss then we're OK. */		\
+	mov.l	.L_ebss, r1;				\
+	cmp/hi	r1, r15;				\
+	bt	1f;					\
+							\
+	/* If sp < init_stack, we're not OK. */		\
+	mov.l	.L_init_thread_union, r1;		\
+	cmp/hs	r1, r15;				\
+	bf	stack_panic;				\
+							\
+	/* If sp > init_stack && sp < _ebss, not OK. */	\
+	add	r0, r1;					\
+	cmp/hs	r1, r15;				\
+	bt	stack_panic;				\
+1:
+#else
+#define STACK_CHECK()
+#endif /* CONFIG_STACK_DEBUG */
+
 	.align 2
 	.globl	_mcount
 	.type	_mcount,@function
@@ -35,6 +86,19 @@
 	.type	mcount,@function
 _mcount:
 mcount:
+	STACK_CHECK()
+
+#ifndef CONFIG_FUNCTION_TRACER
+	rts
+	 nop
+#else
+#ifndef CONFIG_DYNAMIC_FTRACE
+	mov.l	.Lfunction_trace_stop, r0
+	mov.l	@r0, r0
+	tst	r0, r0
+	bf	ftrace_stub
+#endif
+
 	MCOUNT_ENTER()
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -52,16 +116,69 @@ mcount_call:
 	jsr	@r6
 	 nop
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	mov.l   .Lftrace_graph_return, r6
+	mov.l   .Lftrace_stub, r7
+	cmp/eq  r6, r7
+	bt      1f
+
+	mov.l   .Lftrace_graph_caller, r0
+	jmp     @r0
+	 nop
+
+1:
+	mov.l	.Lftrace_graph_entry, r6
+	mov.l	.Lftrace_graph_entry_stub, r7
+	cmp/eq	r6, r7
+	bt	skip_trace
+
+	mov.l   .Lftrace_graph_caller, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+.Lftrace_graph_return:
+	.long   ftrace_graph_return
+.Lftrace_graph_entry:
+	.long   ftrace_graph_entry
+.Lftrace_graph_entry_stub:
+	.long   ftrace_graph_entry_stub
+.Lftrace_graph_caller:
+	.long   ftrace_graph_caller
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+	.globl skip_trace
 skip_trace:
 	MCOUNT_LEAVE()
 
 	.align 2
 .Lftrace_trace_function:
-	.long	ftrace_trace_function
+	.long   ftrace_trace_function
 
 #ifdef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * NOTE: Do not move either ftrace_graph_call or ftrace_caller
+ * as this will affect the calculation of GRAPH_INSN_OFFSET.
+ */
+	.globl ftrace_graph_call
+ftrace_graph_call:
+	mov.l	.Lskip_trace, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+.Lskip_trace:
+	.long	skip_trace
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
 	.globl ftrace_caller
 ftrace_caller:
+	mov.l	.Lfunction_trace_stop, r0
+	mov.l	@r0, r0
+	tst	r0, r0
+	bf	ftrace_stub
+
 	MCOUNT_ENTER()
 
 	.globl ftrace_call
@@ -70,9 +187,18 @@ ftrace_call:
 	jsr	@r6
 	 nop
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	bra	ftrace_graph_call
+	 nop
+#else
 	MCOUNT_LEAVE()
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
+	.align 2
+.Lfunction_trace_stop:
+	.long	function_trace_stop
+
 /*
  * NOTE: From here on the locations of the .Lftrace_stub label and
  * ftrace_stub itself are fixed. Adding additional data here will skew
@@ -80,7 +206,6 @@ ftrace_call:
  * Place new labels either after the ftrace_stub body, or before
  * ftrace_caller. You have been warned.
  */
-	.align 2
 .Lftrace_stub:
 	.long	ftrace_stub
 
@@ -88,3 +213,98 @@ ftrace_call:
 ftrace_stub:
 	rts
 	 nop
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	mov.l	2f, r0
+	mov.l	@r0, r0
+	tst	r0, r0
+	bt	1f
+
+	mov.l	3f, r1
+	jmp	@r1
+	 nop
+1:
+	/*
+	 * MCOUNT_ENTER() pushed 5 registers onto the stack, so
+	 * the stack address containing our return address is
+	 * r15 + 20.
+	 */
+	mov	#20, r0
+	add	r15, r0
+	mov	r0, r4
+
+	mov.l	.Lprepare_ftrace_return, r0
+	jsr	@r0
+	 nop
+
+	MCOUNT_LEAVE()
+
+	.align 2
+2:	.long	function_trace_stop
+3:	.long	skip_trace
+.Lprepare_ftrace_return:
+	.long	prepare_ftrace_return
+
+	.globl	return_to_handler
+return_to_handler:
+	/*
+	 * Save the return values.
+	 */
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+
+	mov	#0, r4
+
+	mov.l	.Lftrace_return_to_handler, r0
+	jsr	@r0
+	 nop
+
+	/*
+	 * The return value from ftrace_return_handler has the real
+	 * address that we should return to.
+	 */
+	lds	r0, pr
+	mov.l	@r15+, r1
+	rts
+	 mov.l	@r15+, r0
+
+
+	.align 2
+.Lftrace_return_to_handler:
+	.long	ftrace_return_to_handler
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_STACK_DEBUG
+	.globl	stack_panic
+stack_panic:
+	mov.l	.Ldump_stack, r0
+	jsr	@r0
+	 nop
+
+	mov.l	.Lpanic, r0
+	jsr	@r0
+	 mov.l	.Lpanic_s, r4
+
+	rts
+	 nop
+
+	.align 2
+.L_ebss:
+	.long	_ebss
+.L_init_thread_union:
+	.long	init_thread_union
+.Lpanic:
+	.long	panic
+.Lpanic_s:
+	.long	.Lpanic_str
+.Ldump_stack:
+	.long	dump_stack
+
+	.section	.rodata
+	.align 2
+.Lpanic_str:
+	.string "Stack error"
+#endif /* CONFIG_STACK_DEBUG */
diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile
index 334bb2da36ea..1fee75aa1f98 100644
--- a/arch/sh/lib64/Makefile
+++ b/arch/sh/lib64/Makefile
@@ -11,7 +11,7 @@
 
 # Panic should really be compiled as PIC
 lib-y  := udelay.o dbg.o panic.o memcpy.o memset.o \
-	  copy_user_memcpy.o copy_page.o clear_page.o strcpy.o strlen.o
+	  copy_user_memcpy.o copy_page.o strcpy.o strlen.o
 
 # Extracted from libgcc
 lib-y	+= udivsi3.o udivdi3.o sdivsi3.o
diff --git a/arch/sh/lib64/clear_page.S b/arch/sh/lib64/clear_page.S
deleted file mode 100644
index 007ab48ecc1c..000000000000
--- a/arch/sh/lib64/clear_page.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-   Copyright 2003 Richard Curnow, SuperH (UK) Ltd.
-
-   This file is subject to the terms and conditions of the GNU General Public
-   License.  See the file "COPYING" in the main directory of this archive
-   for more details.
-
-   Tight version of memset for the case of just clearing a page.  It turns out
-   that having the alloco's spaced out slightly due to the increment/branch
-   pair causes them to contend less for access to the cache.  Similarly,
-   keeping the stores apart from the allocos causes less contention.  => Do two
-   separate loops.  Do multiple stores per loop to amortise the
-   increment/branch cost a little.
-
-   Parameters:
-   r2 : source effective address (start of page)
-
-   Always clears 4096 bytes.
-
-   Note : alloco guarded by synco to avoid TAKum03020 erratum
-
-*/
-
-	.section .text..SHmedia32,"ax"
-	.little
-
-	.balign 8
-	.global clear_page
-clear_page:
-	pta/l 1f, tr1
-	pta/l 2f, tr2
-	ptabs/l r18, tr0
-
-	movi 4096, r7
-	add  r2, r7, r7
-	add  r2, r63, r6
-1:
-	alloco r6, 0
-	synco	! TAKum03020
-	addi	r6, 32, r6
-	bgt/l	r7, r6, tr1
-
-	add  r2, r63, r6
-2:
-	st.q  r6,   0, r63
-	st.q  r6,   8, r63
-	st.q  r6,  16, r63
-	st.q  r6,  24, r63
-	addi r6, 32, r6
-	bgt/l r7, r6, tr2
-
-	blink tr0, r63
-
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 2795618e4f07..64dc1ad59801 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -82,7 +82,7 @@ config 32BIT
 
 config PMB_ENABLE
 	bool "Support 32-bit physical addressing through PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
 	select 32BIT
 	default y
 	help
@@ -97,7 +97,7 @@ choice
 
 config PMB
 	bool "PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
 	select 32BIT
 	help
 	  If you say Y here, physical addressing will be extended to
@@ -106,7 +106,8 @@ config PMB
 
 config PMB_FIXED
 	bool "fixed PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || \
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || \
+					   CPU_SUBTYPE_SH7780 || \
 					   CPU_SUBTYPE_SH7785)
 	select 32BIT
 	help
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 9f4bc3d90b1e..3759bf853293 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -1,5 +1,65 @@
-ifeq ($(CONFIG_SUPERH32),y)
-include ${srctree}/arch/sh/mm/Makefile_32
-else
-include ${srctree}/arch/sh/mm/Makefile_64
+#
+# Makefile for the Linux SuperH-specific parts of the memory manager.
+#
+
+obj-y			:= cache.o init.o consistent.o mmap.o
+
+cacheops-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
+cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
+cacheops-$(CONFIG_CPU_SH5)		:= cache-sh5.o flush-sh4.o
+cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+
+obj-y			+= $(cacheops-y)
+
+mmu-y			:= nommu.o extable_32.o
+mmu-$(CONFIG_MMU)	:= extable_$(BITS).o fault_$(BITS).o \
+			   ioremap_$(BITS).o kmap.o tlbflush_$(BITS).o
+
+obj-y			+= $(mmu-y)
+obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
+
+ifdef CONFIG_DEBUG_FS
+obj-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
 endif
+
+ifdef CONFIG_MMU
+tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
+tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
+tlb-$(CONFIG_CPU_SH5)		:= tlb-sh5.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
+obj-y				+= $(tlb-y)
+endif
+
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_PMB)		+= pmb.o
+obj-$(CONFIG_PMB_FIXED)		+= pmb-fixed.o
+obj-$(CONFIG_NUMA)		+= numa.o
+
+# Special flags for fault_64.o.  This puts restrictions on the number of
+# caller-save registers that the compiler can target when building this file.
+# This is required because the code is called from a context in entry.S where
+# very few registers have been saved in the exception handler (for speed
+# reasons).
+# The caller save registers that have been saved and which can be used are
+# r2,r3,r4,r5 : argument passing
+# r15, r18 : SP and LINK
+# tr0-4 : allow all caller-save TR's.  The compiler seems to be able to make
+#         use of them, so it's probably beneficial to performance to save them
+#         and have them available for it.
+#
+# The resources not listed below are callee save, i.e. the compiler is free to
+# use any of them and will spill them to the stack itself.
+
+CFLAGS_fault_64.o += -ffixed-r7 \
+	-ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
+	-ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
+	-ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
+	-ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
+	-ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
+	-ffixed-r41 -ffixed-r42 -ffixed-r43  \
+	-ffixed-r60 -ffixed-r61 -ffixed-r62 \
+	-fomit-frame-pointer
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
deleted file mode 100644
index 986a1e055834..000000000000
--- a/arch/sh/mm/Makefile_32
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# Makefile for the Linux SuperH-specific parts of the memory manager.
-#
-
-obj-y			:= init.o extable_32.o consistent.o mmap.o
-
-ifndef CONFIG_CACHE_OFF
-cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
-cache-$(CONFIG_CPU_SH2A)	:= cache-sh2a.o
-cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
-cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o
-cache-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
-endif
-
-obj-y			+= $(cache-y)
-
-mmu-y			:= tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o
-
-obj-y			+= $(mmu-y)
-obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
-
-ifdef CONFIG_DEBUG_FS
-obj-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
-endif
-
-ifdef CONFIG_MMU
-tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
-obj-y				+= $(tlb-y)
-ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH4)		+= pg-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB)	+= pg-sh7705.o
-endif
-endif
-
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_PMB)		+= pmb.o
-obj-$(CONFIG_PMB_FIXED)		+= pmb-fixed.o
-obj-$(CONFIG_NUMA)		+= numa.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64
deleted file mode 100644
index 2863ffb7006d..000000000000
--- a/arch/sh/mm/Makefile_64
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# Makefile for the Linux SuperH-specific parts of the memory manager.
-#
-
-obj-y			:= init.o consistent.o mmap.o
-
-mmu-y			:= tlb-nommu.o pg-nommu.o extable_32.o
-mmu-$(CONFIG_MMU)	:= fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
-			   extable_64.o
-
-ifndef CONFIG_CACHE_OFF
-obj-y			+= cache-sh5.o
-endif
-
-obj-y			+= $(mmu-y)
-obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
-
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_NUMA)		+= numa.o
-
-EXTRA_CFLAGS += -Werror
-
-# Special flags for fault_64.o.  This puts restrictions on the number of
-# caller-save registers that the compiler can target when building this file.
-# This is required because the code is called from a context in entry.S where
-# very few registers have been saved in the exception handler (for speed
-# reasons).
-# The caller save registers that have been saved and which can be used are
-# r2,r3,r4,r5 : argument passing
-# r15, r18 : SP and LINK
-# tr0-4 : allow all caller-save TR's.  The compiler seems to be able to make
-#         use of them, so it's probably beneficial to performance to save them
-#         and have them available for it.
-#
-# The resources not listed below are callee save, i.e. the compiler is free to
-# use any of them and will spill them to the stack itself.
-
-CFLAGS_fault_64.o += -ffixed-r7 \
-	-ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
-	-ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
-	-ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
-	-ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
-	-ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
-	-ffixed-r41 -ffixed-r42 -ffixed-r43  \
-	-ffixed-r60 -ffixed-r61 -ffixed-r62 \
-	-fomit-frame-pointer
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index c4e80d2b764b..699a71f46327 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -16,7 +16,7 @@
 #include <asm/cacheflush.h>
 #include <asm/io.h>
 
-void __flush_wback_region(void *start, int size)
+static void sh2__flush_wback_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -37,7 +37,7 @@ void __flush_wback_region(void *start, int size)
 	}
 }
 
-void __flush_purge_region(void *start, int size)
+static void sh2__flush_purge_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -51,7 +51,7 @@ void __flush_purge_region(void *start, int size)
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 }
 
-void __flush_invalidate_region(void *start, int size)
+static void sh2__flush_invalidate_region(void *start, int size)
 {
 #ifdef CONFIG_CACHE_WRITEBACK
 	/*
@@ -82,3 +82,10 @@ void __flush_invalidate_region(void *start, int size)
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 #endif
 }
+
+void __init sh2_cache_init(void)
+{
+	__flush_wback_region		= sh2__flush_wback_region;
+	__flush_purge_region		= sh2__flush_purge_region;
+	__flush_invalidate_region	= sh2__flush_invalidate_region;
+}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index 24d86a794065..975899d83564 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -15,7 +15,7 @@
 #include <asm/cacheflush.h>
 #include <asm/io.h>
 
-void __flush_wback_region(void *start, int size)
+static void sh2a__flush_wback_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -44,7 +44,7 @@ void __flush_wback_region(void *start, int size)
 	local_irq_restore(flags);
 }
 
-void __flush_purge_region(void *start, int size)
+static void sh2a__flush_purge_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -65,7 +65,7 @@ void __flush_purge_region(void *start, int size)
 	local_irq_restore(flags);
 }
 
-void __flush_invalidate_region(void *start, int size)
+static void sh2a__flush_invalidate_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -97,13 +97,15 @@ void __flush_invalidate_region(void *start, int size)
 }
 
 /* WBack O-Cache and flush I-Cache */
-void flush_icache_range(unsigned long start, unsigned long end)
+static void sh2a_flush_icache_range(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long start, end;
 	unsigned long v;
 	unsigned long flags;
 
-	start = start & ~(L1_CACHE_BYTES-1);
-	end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
+	start = data->addr1 & ~(L1_CACHE_BYTES-1);
+	end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
 
 	local_irq_save(flags);
 	jump_to_uncached();
@@ -127,3 +129,12 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	back_to_cached();
 	local_irq_restore(flags);
 }
+
+void __init sh2a_cache_init(void)
+{
+	local_flush_icache_range	= sh2a_flush_icache_range;
+
+	__flush_wback_region		= sh2a__flush_wback_region;
+	__flush_purge_region		= sh2a__flush_purge_region;
+	__flush_invalidate_region	= sh2a__flush_invalidate_region;
+}
diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c
index 6d1dbec08ad4..faef80c98134 100644
--- a/arch/sh/mm/cache-sh3.c
+++ b/arch/sh/mm/cache-sh3.c
@@ -32,7 +32,7 @@
  * SIZE: Size of the region.
  */
 
-void __flush_wback_region(void *start, int size)
+static void sh3__flush_wback_region(void *start, int size)
 {
 	unsigned long v, j;
 	unsigned long begin, end;
@@ -71,7 +71,7 @@ void __flush_wback_region(void *start, int size)
  * START: Virtual Address (U0, P1, or P3)
  * SIZE: Size of the region.
  */
-void __flush_purge_region(void *start, int size)
+static void sh3__flush_purge_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -90,11 +90,16 @@ void __flush_purge_region(void *start, int size)
 	}
 }
 
-/*
- * No write back please
- *
- * Except I don't think there's any way to avoid the writeback. So we
- * just alias it to __flush_purge_region(). dwmw2.
- */
-void __flush_invalidate_region(void *start, int size)
-	__attribute__((alias("__flush_purge_region")));
+void __init sh3_cache_init(void)
+{
+	__flush_wback_region = sh3__flush_wback_region;
+	__flush_purge_region = sh3__flush_purge_region;
+
+	/*
+	 * No write back please
+	 *
+	 * Except I don't think there's any way to avoid the writeback.
+	 * So we just alias it to sh3__flush_purge_region(). dwmw2.
+	 */
+	__flush_invalidate_region = sh3__flush_purge_region;
+}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 5cfe08dbb59e..b2453bbef4cd 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/io.h>
 #include <linux/mutex.h>
+#include <linux/fs.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
@@ -25,13 +26,6 @@
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
 #define MAX_ICACHE_PAGES	32
 
-static void __flush_dcache_segment_1way(unsigned long start,
-					unsigned long extent);
-static void __flush_dcache_segment_2way(unsigned long start,
-					unsigned long extent);
-static void __flush_dcache_segment_4way(unsigned long start,
-					unsigned long extent);
-
 static void __flush_cache_4096(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset);
 
@@ -43,182 +37,56 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys,
 static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
 	(void (*)(unsigned long, unsigned long))0xdeadbeef;
 
-static void compute_alias(struct cache_info *c)
+/*
+ * Write back the range of D-cache, and purge the I-cache.
+ *
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
+ */
+static void sh4_flush_icache_range(void *args)
 {
-	c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
-	c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
-}
+	struct flusher_data *data = args;
+	unsigned long start, end;
+	unsigned long flags, v;
+	int i;
 
-static void __init emit_cache_params(void)
-{
-	printk("PVR=%08x CVR=%08x PRR=%08x\n",
-		ctrl_inl(CCN_PVR),
-		ctrl_inl(CCN_CVR),
-		ctrl_inl(CCN_PRR));
-	printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
-		boot_cpu_data.icache.ways,
-		boot_cpu_data.icache.sets,
-		boot_cpu_data.icache.way_incr);
-	printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
-		boot_cpu_data.icache.entry_mask,
-		boot_cpu_data.icache.alias_mask,
-		boot_cpu_data.icache.n_aliases);
-	printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
-		boot_cpu_data.dcache.ways,
-		boot_cpu_data.dcache.sets,
-		boot_cpu_data.dcache.way_incr);
-	printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
-		boot_cpu_data.dcache.entry_mask,
-		boot_cpu_data.dcache.alias_mask,
-		boot_cpu_data.dcache.n_aliases);
+	start = data->addr1;
+	end = data->addr2;
 
-	/*
-	 * Emit Secondary Cache parameters if the CPU has a probed L2.
-	 */
-	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
-		printk("S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
-			boot_cpu_data.scache.ways,
-			boot_cpu_data.scache.sets,
-			boot_cpu_data.scache.way_incr);
-		printk("S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
-			boot_cpu_data.scache.entry_mask,
-			boot_cpu_data.scache.alias_mask,
-			boot_cpu_data.scache.n_aliases);
+	/* If there are too many pages then just blow away the caches */
+	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+		local_flush_cache_all(NULL);
+		return;
 	}
 
-	if (!__flush_dcache_segment_fn)
-		panic("unknown number of cache ways\n");
-}
+	/*
+	 * Selectively flush d-cache then invalidate the i-cache.
+	 * This is inefficient, so only use this for small ranges.
+	 */
+	start &= ~(L1_CACHE_BYTES-1);
+	end += L1_CACHE_BYTES-1;
+	end &= ~(L1_CACHE_BYTES-1);
 
-/*
- * SH-4 has virtually indexed and physically tagged cache.
- */
-void __init p3_cache_init(void)
-{
-	compute_alias(&boot_cpu_data.icache);
-	compute_alias(&boot_cpu_data.dcache);
-	compute_alias(&boot_cpu_data.scache);
-
-	switch (boot_cpu_data.dcache.ways) {
-	case 1:
-		__flush_dcache_segment_fn = __flush_dcache_segment_1way;
-		break;
-	case 2:
-		__flush_dcache_segment_fn = __flush_dcache_segment_2way;
-		break;
-	case 4:
-		__flush_dcache_segment_fn = __flush_dcache_segment_4way;
-		break;
-	default:
-		__flush_dcache_segment_fn = NULL;
-		break;
-	}
+	local_irq_save(flags);
+	jump_to_uncached();
 
-	emit_cache_params();
-}
+	for (v = start; v < end; v += L1_CACHE_BYTES) {
+		unsigned long icacheaddr;
 
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-void __flush_wback_region(void *start, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
-		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbwb	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
-	}
-}
+		__ocbwb(v);
 
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-void __flush_purge_region(void *start, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
-		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbp	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
-	}
-}
+		icacheaddr = CACHE_IC_ADDRESS_ARRAY | (v &
+				cpu_data->icache.entry_mask);
 
-/*
- * No write back please
- */
-void __flush_invalidate_region(void *start, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
-		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbi	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
+		/* Clear i-cache line valid-bit */
+		for (i = 0; i < cpu_data->icache.ways; i++) {
+			__raw_writel(0, icacheaddr);
+			icacheaddr += cpu_data->icache.way_incr;
+		}
 	}
-}
-
-/*
- * Write back the range of D-cache, and purge the I-cache.
- *
- * Called from kernel/module.c:sys_init_module and routine for a.out format,
- * signal handler code and kprobes code
- */
-void flush_icache_range(unsigned long start, unsigned long end)
-{
-	int icacheaddr;
-	unsigned long flags, v;
-	int i;
 
-       /* If there are too many pages then just blow the caches */
-        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-                flush_cache_all();
-       } else {
-               /* selectively flush d-cache then invalidate the i-cache */
-               /* this is inefficient, so only use for small ranges */
-               start &= ~(L1_CACHE_BYTES-1);
-               end += L1_CACHE_BYTES-1;
-               end &= ~(L1_CACHE_BYTES-1);
-
-               local_irq_save(flags);
-               jump_to_uncached();
-
-               for (v = start; v < end; v+=L1_CACHE_BYTES) {
-                       asm volatile("ocbwb     %0"
-                                    : /* no output */
-                                    : "m" (__m(v)));
-
-                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
-                                       v & cpu_data->icache.entry_mask);
-
-                       for (i = 0; i < cpu_data->icache.ways;
-                               i++, icacheaddr += cpu_data->icache.way_incr)
-                                       /* Clear i-cache line valid-bit */
-                                       ctrl_outl(0, icacheaddr);
-               }
-
-		back_to_cached();
-		local_irq_restore(flags);
-	}
+	back_to_cached();
+	local_irq_restore(flags);
 }
 
 static inline void flush_cache_4096(unsigned long start,
@@ -244,9 +112,17 @@ static inline void flush_cache_4096(unsigned long start,
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-void flush_dcache_page(struct page *page)
+static void sh4_flush_dcache_page(void *arg)
 {
-	if (test_bit(PG_mapped, &page->flags)) {
+	struct page *page = arg;
+#ifndef CONFIG_SMP
+	struct address_space *mapping = page_mapping(page);
+
+	if (mapping && !mapping_mapped(mapping))
+		set_bit(PG_dcache_dirty, &page->flags);
+	else
+#endif
+	{
 		unsigned long phys = PHYSADDR(page_address(page));
 		unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
 		int i, n;
@@ -282,13 +158,13 @@ static void __uses_jump_to_uncached flush_icache_all(void)
 	local_irq_restore(flags);
 }
 
-void flush_dcache_all(void)
+static inline void flush_dcache_all(void)
 {
 	(*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size);
 	wmb();
 }
 
-void flush_cache_all(void)
+static void sh4_flush_cache_all(void *unused)
 {
 	flush_dcache_all();
 	flush_icache_all();
@@ -380,8 +256,13 @@ loop_exit:
  *
  * Caller takes mm->mmap_sem.
  */
-void flush_cache_mm(struct mm_struct *mm)
+static void sh4_flush_cache_mm(void *arg)
 {
+	struct mm_struct *mm = arg;
+
+	if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
+		return;
+
 	/*
 	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
 	 * the cache is physically tagged, the data can just be left in there.
@@ -417,12 +298,21 @@ void flush_cache_mm(struct mm_struct *mm)
  * ADDR: Virtual Address (U0 address)
  * PFN: Physical page number
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
-		      unsigned long pfn)
+static void sh4_flush_cache_page(void *args)
 {
-	unsigned long phys = pfn << PAGE_SHIFT;
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long address, pfn, phys;
 	unsigned int alias_mask;
 
+	vma = data->vma;
+	address = data->addr1;
+	pfn = data->addr2;
+	phys = pfn << PAGE_SHIFT;
+
+	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
+		return;
+
 	alias_mask = boot_cpu_data.dcache.alias_mask;
 
 	/* We only need to flush D-cache when we have alias */
@@ -462,9 +352,19 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
  * Flushing the cache lines for U0 only isn't enough.
  * We need to flush for P1 too, which may contain aliases.
  */
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
+static void sh4_flush_cache_range(void *args)
 {
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long start, end;
+
+	vma = data->vma;
+	start = data->addr1;
+	end = data->addr2;
+
+	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
+		return;
+
 	/*
 	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
 	 * the cache is physically tagged, the data can just be left in there.
@@ -492,20 +392,6 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 	}
 }
 
-/*
- * flush_icache_user_range
- * @vma: VMA of the process
- * @page: page
- * @addr: U0 address
- * @len: length of the range (< page size)
- */
-void flush_icache_user_range(struct vm_area_struct *vma,
-			     struct page *page, unsigned long addr, int len)
-{
-	flush_cache_page(vma, addr, page_to_pfn(page));
-	mb();
-}
-
 /**
  * __flush_cache_4096
  *
@@ -581,7 +467,49 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys,
  * Break the 1, 2 and 4 way variants of this out into separate functions to
  * avoid nearly all the overhead of having the conditional stuff in the function
  * bodies (+ the 1 and 2 way cases avoid saving any registers too).
+ *
+ * We want to eliminate unnecessary bus transactions, so this code uses
+ * a non-obvious technique.
+ *
+ * Loop over a cache way sized block of, one cache line at a time. For each
+ * line, use movca.a to cause the current cache line contents to be written
+ * back, but without reading anything from main memory. However this has the
+ * side effect that the cache is now caching that memory location. So follow
+ * this with a cache invalidate to mark the cache line invalid. And do all
+ * this with interrupts disabled, to avoid the cache line being accidently
+ * evicted while it is holding garbage.
+ *
+ * This also breaks in a number of circumstances:
+ * - if there are modifications to the region of memory just above
+ *   empty_zero_page (for example because a breakpoint has been placed
+ *   there), then these can be lost.
+ *
+ *   This is because the the memory address which the cache temporarily
+ *   caches in the above description is empty_zero_page. So the
+ *   movca.l hits the cache (it is assumed that it misses, or at least
+ *   isn't dirty), modifies the line and then invalidates it, losing the
+ *   required change.
+ *
+ * - If caches are disabled or configured in write-through mode, then
+ *   the movca.l writes garbage directly into memory.
  */
+static void __flush_dcache_segment_writethrough(unsigned long start,
+					        unsigned long extent_per_way)
+{
+	unsigned long addr;
+	int i;
+
+	addr = CACHE_OC_ADDRESS_ARRAY | (start & cpu_data->dcache.entry_mask);
+
+	while (extent_per_way) {
+		for (i = 0; i < cpu_data->dcache.ways; i++)
+			__raw_writel(0, addr + cpu_data->dcache.way_incr * i);
+
+		addr += cpu_data->dcache.linesz;
+		extent_per_way -= cpu_data->dcache.linesz;
+	}
+}
+
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent_per_way)
 {
@@ -773,3 +701,47 @@ static void __flush_dcache_segment_4way(unsigned long start,
 		a3 += linesz;
 	} while (a0 < a0e);
 }
+
+extern void __weak sh4__flush_region_init(void);
+
+/*
+ * SH-4 has virtually indexed and physically tagged cache.
+ */
+void __init sh4_cache_init(void)
+{
+	unsigned int wt_enabled = !!(__raw_readl(CCR) & CCR_CACHE_WT);
+
+	printk("PVR=%08x CVR=%08x PRR=%08x\n",
+		ctrl_inl(CCN_PVR),
+		ctrl_inl(CCN_CVR),
+		ctrl_inl(CCN_PRR));
+
+	if (wt_enabled)
+		__flush_dcache_segment_fn = __flush_dcache_segment_writethrough;
+	else {
+		switch (boot_cpu_data.dcache.ways) {
+		case 1:
+			__flush_dcache_segment_fn = __flush_dcache_segment_1way;
+			break;
+		case 2:
+			__flush_dcache_segment_fn = __flush_dcache_segment_2way;
+			break;
+		case 4:
+			__flush_dcache_segment_fn = __flush_dcache_segment_4way;
+			break;
+		default:
+			panic("unknown number of cache ways\n");
+			break;
+		}
+	}
+
+	local_flush_icache_range	= sh4_flush_icache_range;
+	local_flush_dcache_page		= sh4_flush_dcache_page;
+	local_flush_cache_all		= sh4_flush_cache_all;
+	local_flush_cache_mm		= sh4_flush_cache_mm;
+	local_flush_cache_dup_mm	= sh4_flush_cache_mm;
+	local_flush_cache_page		= sh4_flush_cache_page;
+	local_flush_cache_range		= sh4_flush_cache_range;
+
+	sh4__flush_region_init();
+}
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 86762092508c..467ff8e260f7 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -20,23 +20,11 @@
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
 
+extern void __weak sh4__flush_region_init(void);
+
 /* Wired TLB entry for the D-cache */
 static unsigned long long dtlb_cache_slot;
 
-void __init p3_cache_init(void)
-{
-	/* Reserve a slot for dcache colouring in the DTLB */
-	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
-}
-
-#ifdef CONFIG_DCACHE_DISABLED
-#define sh64_dcache_purge_all()					do { } while (0)
-#define sh64_dcache_purge_coloured_phy_page(paddr, eaddr)	do { } while (0)
-#define sh64_dcache_purge_user_range(mm, start, end)		do { } while (0)
-#define sh64_dcache_purge_phy_page(paddr)			do { } while (0)
-#define sh64_dcache_purge_virt_page(mm, eaddr)			do { } while (0)
-#endif
-
 /*
  * The following group of functions deal with mapping and unmapping a
  * temporary page into a DTLB slot that has been set aside for exclusive
@@ -56,7 +44,6 @@ static inline void sh64_teardown_dtlb_cache_slot(void)
 	local_irq_enable();
 }
 
-#ifndef CONFIG_ICACHE_DISABLED
 static inline void sh64_icache_inv_all(void)
 {
 	unsigned long long addr, flag, data;
@@ -214,52 +201,6 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
 	}
 }
 
-/*
- * Invalidate a small range of user context I-cache, not necessarily page
- * (or even cache-line) aligned.
- *
- * Since this is used inside ptrace, the ASID in the mm context typically
- * won't match current_asid.  We'll have to switch ASID to do this.  For
- * safety, and given that the range will be small, do all this under cli.
- *
- * Note, there is a hazard that the ASID in mm->context is no longer
- * actually associated with mm, i.e. if the mm->context has started a new
- * cycle since mm was last active.  However, this is just a performance
- * issue: all that happens is that we invalidate lines belonging to
- * another mm, so the owning process has to refill them when that mm goes
- * live again.  mm itself can't have any cache entries because there will
- * have been a flush_cache_all when the new mm->context cycle started.
- */
-static void sh64_icache_inv_user_small_range(struct mm_struct *mm,
-						unsigned long start, int len)
-{
-	unsigned long long eaddr = start;
-	unsigned long long eaddr_end = start + len;
-	unsigned long current_asid, mm_asid;
-	unsigned long flags;
-	unsigned long long epage_start;
-
-	/*
-	 * Align to start of cache line.  Otherwise, suppose len==8 and
-	 * start was at 32N+28 : the last 4 bytes wouldn't get invalidated.
-	 */
-	eaddr = L1_CACHE_ALIGN(start);
-	eaddr_end = start + len;
-
-	mm_asid = cpu_asid(smp_processor_id(), mm);
-	local_irq_save(flags);
-	current_asid = switch_and_save_asid(mm_asid);
-
-	epage_start = eaddr & PAGE_MASK;
-
-	while (eaddr < eaddr_end) {
-		__asm__ __volatile__("icbi %0, 0" : : "r" (eaddr));
-		eaddr += L1_CACHE_BYTES;
-	}
-	switch_and_save_asid(current_asid);
-	local_irq_restore(flags);
-}
-
 static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end)
 {
 	/* The icbi instruction never raises ITLBMISS.  i.e. if there's not a
@@ -287,9 +228,7 @@ static void sh64_icache_inv_current_user_range(unsigned long start, unsigned lon
 		addr += L1_CACHE_BYTES;
 	}
 }
-#endif /* !CONFIG_ICACHE_DISABLED */
 
-#ifndef CONFIG_DCACHE_DISABLED
 /* Buffer used as the target of alloco instructions to purge data from cache
    sets by natural eviction. -- RPC */
 #define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4))
@@ -541,59 +480,10 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
 }
 
 /*
- * Purge the range of addresses from the D-cache.
- *
- * The addresses lie in the superpage mapping. There's no harm if we
- * overpurge at either end - just a small performance loss.
- */
-void __flush_purge_region(void *start, int size)
-{
-	unsigned long long ullend, addr, aligned_start;
-
-	aligned_start = (unsigned long long)(signed long long)(signed long) start;
-	addr = L1_CACHE_ALIGN(aligned_start);
-	ullend = (unsigned long long) (signed long long) (signed long) start + size;
-
-	while (addr <= ullend) {
-		__asm__ __volatile__ ("ocbp %0, 0" : : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
-
-void __flush_wback_region(void *start, int size)
-{
-	unsigned long long ullend, addr, aligned_start;
-
-	aligned_start = (unsigned long long)(signed long long)(signed long) start;
-	addr = L1_CACHE_ALIGN(aligned_start);
-	ullend = (unsigned long long) (signed long long) (signed long) start + size;
-
-	while (addr < ullend) {
-		__asm__ __volatile__ ("ocbwb %0, 0" : : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
-
-void __flush_invalidate_region(void *start, int size)
-{
-	unsigned long long ullend, addr, aligned_start;
-
-	aligned_start = (unsigned long long)(signed long long)(signed long) start;
-	addr = L1_CACHE_ALIGN(aligned_start);
-	ullend = (unsigned long long) (signed long long) (signed long) start + size;
-
-	while (addr < ullend) {
-		__asm__ __volatile__ ("ocbi %0, 0" : : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
-#endif /* !CONFIG_DCACHE_DISABLED */
-
-/*
  * Invalidate the entire contents of both caches, after writing back to
  * memory any dirty data from the D-cache.
  */
-void flush_cache_all(void)
+static void sh5_flush_cache_all(void *unused)
 {
 	sh64_dcache_purge_all();
 	sh64_icache_inv_all();
@@ -620,7 +510,7 @@ void flush_cache_all(void)
  * I-cache.  This is similar to the lack of action needed in
  * flush_tlb_mm - see fault.c.
  */
-void flush_cache_mm(struct mm_struct *mm)
+static void sh5_flush_cache_mm(void *unused)
 {
 	sh64_dcache_purge_all();
 }
@@ -632,13 +522,18 @@ void flush_cache_mm(struct mm_struct *mm)
  *
  * Note, 'end' is 1 byte beyond the end of the range to flush.
  */
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
+static void sh5_flush_cache_range(void *args)
 {
-	struct mm_struct *mm = vma->vm_mm;
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long start, end;
+
+	vma = data->vma;
+	start = data->addr1;
+	end = data->addr2;
 
-	sh64_dcache_purge_user_range(mm, start, end);
-	sh64_icache_inv_user_page_range(mm, start, end);
+	sh64_dcache_purge_user_range(vma->vm_mm, start, end);
+	sh64_icache_inv_user_page_range(vma->vm_mm, start, end);
 }
 
 /*
@@ -650,16 +545,23 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
  *
  * Note, this is called with pte lock held.
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long eaddr,
-		      unsigned long pfn)
+static void sh5_flush_cache_page(void *args)
 {
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long eaddr, pfn;
+
+	vma = data->vma;
+	eaddr = data->addr1;
+	pfn = data->addr2;
+
 	sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
 
 	if (vma->vm_flags & VM_EXEC)
 		sh64_icache_inv_user_page(vma, eaddr);
 }
 
-void flush_dcache_page(struct page *page)
+static void sh5_flush_dcache_page(void *page)
 {
 	sh64_dcache_purge_phy_page(page_to_phys(page));
 	wmb();
@@ -673,162 +575,47 @@ void flush_dcache_page(struct page *page)
  * mapping, therefore it's guaranteed that there no cache entries for
  * the range in cache sets of the wrong colour.
  */
-void flush_icache_range(unsigned long start, unsigned long end)
+static void sh5_flush_icache_range(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long start, end;
+
+	start = data->addr1;
+	end = data->addr2;
+
 	__flush_purge_region((void *)start, end);
 	wmb();
 	sh64_icache_inv_kernel_range(start, end);
 }
 
 /*
- * Flush the range of user (defined by vma->vm_mm) address space starting
- * at 'addr' for 'len' bytes from the cache.  The range does not straddle
- * a page boundary, the unique physical page containing the range is
- * 'page'.  This seems to be used mainly for invalidating an address
- * range following a poke into the program text through the ptrace() call
- * from another process (e.g. for BRK instruction insertion).
- */
-void flush_icache_user_range(struct vm_area_struct *vma,
-			struct page *page, unsigned long addr, int len)
-{
-
-	sh64_dcache_purge_coloured_phy_page(page_to_phys(page), addr);
-	mb();
-
-	if (vma->vm_flags & VM_EXEC)
-		sh64_icache_inv_user_small_range(vma->vm_mm, addr, len);
-}
-
-/*
  * For the address range [start,end), write back the data from the
  * D-cache and invalidate the corresponding region of the I-cache for the
  * current process.  Used to flush signal trampolines on the stack to
  * make them executable.
  */
-void flush_cache_sigtramp(unsigned long vaddr)
+static void sh5_flush_cache_sigtramp(void *vaddr)
 {
-	unsigned long end = vaddr + L1_CACHE_BYTES;
+	unsigned long end = (unsigned long)vaddr + L1_CACHE_BYTES;
 
-	__flush_wback_region((void *)vaddr, L1_CACHE_BYTES);
+	__flush_wback_region(vaddr, L1_CACHE_BYTES);
 	wmb();
-	sh64_icache_inv_current_user_range(vaddr, end);
+	sh64_icache_inv_current_user_range((unsigned long)vaddr, end);
 }
 
-#ifdef CONFIG_MMU
-/*
- * These *MUST* lie in an area of virtual address space that's otherwise
- * unused.
- */
-#define UNIQUE_EADDR_START 0xe0000000UL
-#define UNIQUE_EADDR_END   0xe8000000UL
-
-/*
- * Given a physical address paddr, and a user virtual address user_eaddr
- * which will eventually be mapped to it, create a one-off kernel-private
- * eaddr mapped to the same paddr.  This is used for creating special
- * destination pages for copy_user_page and clear_user_page.
- */
-static unsigned long sh64_make_unique_eaddr(unsigned long user_eaddr,
-					    unsigned long paddr)
-{
-	static unsigned long current_pointer = UNIQUE_EADDR_START;
-	unsigned long coloured_pointer;
-
-	if (current_pointer == UNIQUE_EADDR_END) {
-		sh64_dcache_purge_all();
-		current_pointer = UNIQUE_EADDR_START;
-	}
-
-	coloured_pointer = (current_pointer & ~CACHE_OC_SYN_MASK) |
-				(user_eaddr & CACHE_OC_SYN_MASK);
-	sh64_setup_dtlb_cache_slot(coloured_pointer, get_asid(), paddr);
-
-	current_pointer += (PAGE_SIZE << CACHE_OC_N_SYNBITS);
-
-	return coloured_pointer;
-}
-
-static void sh64_copy_user_page_coloured(void *to, void *from,
-					 unsigned long address)
+void __init sh5_cache_init(void)
 {
-	void *coloured_to;
+	local_flush_cache_all		= sh5_flush_cache_all;
+	local_flush_cache_mm		= sh5_flush_cache_mm;
+	local_flush_cache_dup_mm	= sh5_flush_cache_mm;
+	local_flush_cache_page		= sh5_flush_cache_page;
+	local_flush_cache_range		= sh5_flush_cache_range;
+	local_flush_dcache_page		= sh5_flush_dcache_page;
+	local_flush_icache_range	= sh5_flush_icache_range;
+	local_flush_cache_sigtramp	= sh5_flush_cache_sigtramp;
 
-	/*
-	 * Discard any existing cache entries of the wrong colour.  These are
-	 * present quite often, if the kernel has recently used the page
-	 * internally, then given it up, then it's been allocated to the user.
-	 */
-	sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long)to);
-
-	coloured_to = (void *)sh64_make_unique_eaddr(address, __pa(to));
-	copy_page(from, coloured_to);
-
-	sh64_teardown_dtlb_cache_slot();
-}
-
-static void sh64_clear_user_page_coloured(void *to, unsigned long address)
-{
-	void *coloured_to;
-
-	/*
-	 * Discard any existing kernel-originated lines of the wrong
-	 * colour (as above)
-	 */
-	sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long)to);
-
-	coloured_to = (void *)sh64_make_unique_eaddr(address, __pa(to));
-	clear_page(coloured_to);
-
-	sh64_teardown_dtlb_cache_slot();
-}
-
-/*
- * 'from' and 'to' are kernel virtual addresses (within the superpage
- * mapping of the physical RAM).  'address' is the user virtual address
- * where the copy 'to' will be mapped after.  This allows a custom
- * mapping to be used to ensure that the new copy is placed in the
- * right cache sets for the user to see it without having to bounce it
- * out via memory.  Note however : the call to flush_page_to_ram in
- * (generic)/mm/memory.c:(break_cow) undoes all this good work in that one
- * very important case!
- *
- * TBD : can we guarantee that on every call, any cache entries for
- * 'from' are in the same colour sets as 'address' also?  i.e. is this
- * always used just to deal with COW?  (I suspect not).
- *
- * There are two possibilities here for when the page 'from' was last accessed:
- * - by the kernel : this is OK, no purge required.
- * - by the/a user (e.g. for break_COW) : need to purge.
- *
- * If the potential user mapping at 'address' is the same colour as
- * 'from' there is no need to purge any cache lines from the 'from'
- * page mapped into cache sets of colour 'address'.  (The copy will be
- * accessing the page through 'from').
- */
-void copy_user_page(void *to, void *from, unsigned long address,
-		    struct page *page)
-{
-	if (((address ^ (unsigned long) from) & CACHE_OC_SYN_MASK) != 0)
-		sh64_dcache_purge_coloured_phy_page(__pa(from), address);
-
-	if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0)
-		copy_page(to, from);
-	else
-		sh64_copy_user_page_coloured(to, from, address);
-}
+	/* Reserve a slot for dcache colouring in the DTLB */
+	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
 
-/*
- * 'to' is a kernel virtual address (within the superpage mapping of the
- * physical RAM).  'address' is the user virtual address where the 'to'
- * page will be mapped after.  This allows a custom mapping to be used to
- * ensure that the new copy is placed in the right cache sets for the
- * user to see it without having to bounce it out via memory.
- */
-void clear_user_page(void *to, unsigned long address, struct page *page)
-{
-	if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0)
-		clear_page(to);
-	else
-		sh64_clear_user_page_coloured(to, address);
+	sh4__flush_region_init();
 }
-#endif
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 22dacc778823..2cadee2037ac 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
+#include <linux/fs.h>
 #include <linux/threads.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
@@ -63,15 +64,21 @@ static inline void cache_wback_all(void)
  *
  * Called from kernel/module.c:sys_init_module and routine for a.out format.
  */
-void flush_icache_range(unsigned long start, unsigned long end)
+static void sh7705_flush_icache_range(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long start, end;
+
+	start = data->addr1;
+	end = data->addr2;
+
 	__flush_wback_region((void *)start, end - start);
 }
 
 /*
  * Writeback&Invalidate the D-cache of the page
  */
-static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
+static void __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
 	unsigned long flags;
@@ -126,13 +133,18 @@ static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-void flush_dcache_page(struct page *page)
+static void sh7705_flush_dcache_page(void *arg)
 {
-	if (test_bit(PG_mapped, &page->flags))
+	struct page *page = arg;
+	struct address_space *mapping = page_mapping(page);
+
+	if (mapping && !mapping_mapped(mapping))
+		set_bit(PG_dcache_dirty, &page->flags);
+	else
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
-void __uses_jump_to_uncached flush_cache_all(void)
+static void sh7705_flush_cache_all(void *args)
 {
 	unsigned long flags;
 
@@ -144,44 +156,16 @@ void __uses_jump_to_uncached flush_cache_all(void)
 	local_irq_restore(flags);
 }
 
-void flush_cache_mm(struct mm_struct *mm)
-{
-	/* Is there any good way? */
-	/* XXX: possibly call flush_cache_range for each vm area */
-	flush_cache_all();
-}
-
-/*
- * Write back and invalidate D-caches.
- *
- * START, END: Virtual Address (U0 address)
- *
- * NOTE: We need to flush the _physical_ page entry.
- * Flushing the cache lines for U0 only isn't enough.
- * We need to flush for P1 too, which may contain aliases.
- */
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
-{
-
-	/*
-	 * We could call flush_cache_page for the pages of these range,
-	 * but it's not efficient (scan the caches all the time...).
-	 *
-	 * We can't use A-bit magic, as there's the case we don't have
-	 * valid entry on TLB.
-	 */
-	flush_cache_all();
-}
-
 /*
  * Write back and invalidate I/D-caches for the page.
  *
  * ADDRESS: Virtual Address (U0 address)
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
-		      unsigned long pfn)
+static void sh7705_flush_cache_page(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long pfn = data->addr2;
+
 	__flush_dcache_page(pfn << PAGE_SHIFT);
 }
 
@@ -193,7 +177,19 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
  * Not entirely sure why this is necessary on SH3 with 32K cache but
  * without it we get occasional "Memory fault" when loading a program.
  */
-void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+static void sh7705_flush_icache_page(void *page)
 {
 	__flush_purge_region(page_address(page), PAGE_SIZE);
 }
+
+void __init sh7705_cache_init(void)
+{
+	local_flush_icache_range	= sh7705_flush_icache_range;
+	local_flush_dcache_page		= sh7705_flush_dcache_page;
+	local_flush_cache_all		= sh7705_flush_cache_all;
+	local_flush_cache_mm		= sh7705_flush_cache_all;
+	local_flush_cache_dup_mm	= sh7705_flush_cache_all;
+	local_flush_cache_range		= sh7705_flush_cache_all;
+	local_flush_cache_page		= sh7705_flush_cache_page;
+	local_flush_icache_page		= sh7705_flush_icache_page;
+}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
new file mode 100644
index 000000000000..35c37b7f717a
--- /dev/null
+++ b/arch/sh/mm/cache.c
@@ -0,0 +1,316 @@
+/*
+ * arch/sh/mm/cache.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void (*local_flush_cache_all)(void *args) = cache_noop;
+void (*local_flush_cache_mm)(void *args) = cache_noop;
+void (*local_flush_cache_dup_mm)(void *args) = cache_noop;
+void (*local_flush_cache_page)(void *args) = cache_noop;
+void (*local_flush_cache_range)(void *args) = cache_noop;
+void (*local_flush_dcache_page)(void *args) = cache_noop;
+void (*local_flush_icache_range)(void *args) = cache_noop;
+void (*local_flush_icache_page)(void *args) = cache_noop;
+void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
+
+void (*__flush_wback_region)(void *start, int size);
+void (*__flush_purge_region)(void *start, int size);
+void (*__flush_invalidate_region)(void *start, int size);
+
+static inline void noop__flush_region(void *start, int size)
+{
+}
+
+static inline void cacheop_on_each_cpu(void (*func) (void *info), void *info,
+                                   int wait)
+{
+	preempt_disable();
+	smp_call_function(func, info, wait);
+	func(info);
+	preempt_enable();
+}
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long vaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	    !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(vto, src, len);
+		kunmap_coherent(vto);
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			set_bit(PG_dcache_dirty, &page->flags);
+	}
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_cache_page(vma, vaddr, page_to_pfn(page));
+}
+
+void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+			 unsigned long vaddr, void *dst, const void *src,
+			 unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	    !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(dst, vfrom, len);
+		kunmap_coherent(vfrom);
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			set_bit(PG_dcache_dirty, &page->flags);
+	}
+}
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr, struct vm_area_struct *vma)
+{
+	void *vfrom, *vto;
+
+	vto = kmap_atomic(to, KM_USER1);
+
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
+	    !test_bit(PG_dcache_dirty, &from->flags)) {
+		vfrom = kmap_coherent(from, vaddr);
+		copy_page(vto, vfrom);
+		kunmap_coherent(vfrom);
+	} else {
+		vfrom = kmap_atomic(from, KM_USER0);
+		copy_page(vto, vfrom);
+		kunmap_atomic(vfrom, KM_USER0);
+	}
+
+	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+		__flush_purge_region(vto, PAGE_SIZE);
+
+	kunmap_atomic(vto, KM_USER1);
+	/* Make sure this page is cleared on other CPU's too before using it */
+	smp_wmb();
+}
+EXPORT_SYMBOL(copy_user_highpage);
+
+void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *kaddr = kmap_atomic(page, KM_USER0);
+
+	clear_page(kaddr);
+
+	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
+		__flush_purge_region(kaddr, PAGE_SIZE);
+
+	kunmap_atomic(kaddr, KM_USER0);
+}
+EXPORT_SYMBOL(clear_user_highpage);
+
+void __update_cache(struct vm_area_struct *vma,
+		    unsigned long address, pte_t pte)
+{
+	struct page *page;
+	unsigned long pfn = pte_pfn(pte);
+
+	if (!boot_cpu_data.dcache.n_aliases)
+		return;
+
+	page = pfn_to_page(pfn);
+	if (pfn_valid(pfn) && page_mapping(page)) {
+		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+		if (dirty) {
+			unsigned long addr = (unsigned long)page_address(page);
+
+			if (pages_do_alias(addr, address & PAGE_MASK))
+				__flush_purge_region((void *)addr, PAGE_SIZE);
+		}
+	}
+}
+
+void __flush_anon_page(struct page *page, unsigned long vmaddr)
+{
+	unsigned long addr = (unsigned long) page_address(page);
+
+	if (pages_do_alias(addr, vmaddr)) {
+		if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+		    !test_bit(PG_dcache_dirty, &page->flags)) {
+			void *kaddr;
+
+			kaddr = kmap_coherent(page, vmaddr);
+			/* XXX.. For now kunmap_coherent() does a purge */
+			/* __flush_purge_region((void *)kaddr, PAGE_SIZE); */
+			kunmap_coherent(kaddr);
+		} else
+			__flush_purge_region((void *)addr, PAGE_SIZE);
+	}
+}
+
+void flush_cache_all(void)
+{
+	cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
+}
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+	cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
+}
+
+void flush_cache_dup_mm(struct mm_struct *mm)
+{
+	cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+		      unsigned long pfn)
+{
+	struct flusher_data data;
+
+	data.vma = vma;
+	data.addr1 = addr;
+	data.addr2 = pfn;
+
+	cacheop_on_each_cpu(local_flush_cache_page, (void *)&data, 1);
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end)
+{
+	struct flusher_data data;
+
+	data.vma = vma;
+	data.addr1 = start;
+	data.addr2 = end;
+
+	cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
+}
+
+void flush_dcache_page(struct page *page)
+{
+	cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
+}
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	struct flusher_data data;
+
+	data.vma = NULL;
+	data.addr1 = start;
+	data.addr2 = end;
+
+	cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
+}
+
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+	/* Nothing uses the VMA, so just pass the struct page along */
+	cacheop_on_each_cpu(local_flush_icache_page, page, 1);
+}
+
+void flush_cache_sigtramp(unsigned long address)
+{
+	cacheop_on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
+}
+
+static void compute_alias(struct cache_info *c)
+{
+	c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
+	c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
+}
+
+static void __init emit_cache_params(void)
+{
+	printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		boot_cpu_data.icache.ways,
+		boot_cpu_data.icache.sets,
+		boot_cpu_data.icache.way_incr);
+	printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		boot_cpu_data.icache.entry_mask,
+		boot_cpu_data.icache.alias_mask,
+		boot_cpu_data.icache.n_aliases);
+	printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		boot_cpu_data.dcache.ways,
+		boot_cpu_data.dcache.sets,
+		boot_cpu_data.dcache.way_incr);
+	printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		boot_cpu_data.dcache.entry_mask,
+		boot_cpu_data.dcache.alias_mask,
+		boot_cpu_data.dcache.n_aliases);
+
+	/*
+	 * Emit Secondary Cache parameters if the CPU has a probed L2.
+	 */
+	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
+		printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+			boot_cpu_data.scache.ways,
+			boot_cpu_data.scache.sets,
+			boot_cpu_data.scache.way_incr);
+		printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+			boot_cpu_data.scache.entry_mask,
+			boot_cpu_data.scache.alias_mask,
+			boot_cpu_data.scache.n_aliases);
+	}
+}
+
+void __init cpu_cache_init(void)
+{
+	compute_alias(&boot_cpu_data.icache);
+	compute_alias(&boot_cpu_data.dcache);
+	compute_alias(&boot_cpu_data.scache);
+
+	__flush_wback_region		= noop__flush_region;
+	__flush_purge_region		= noop__flush_region;
+	__flush_invalidate_region	= noop__flush_region;
+
+	if (boot_cpu_data.family == CPU_FAMILY_SH2) {
+		extern void __weak sh2_cache_init(void);
+
+		sh2_cache_init();
+	}
+
+	if (boot_cpu_data.family == CPU_FAMILY_SH2A) {
+		extern void __weak sh2a_cache_init(void);
+
+		sh2a_cache_init();
+	}
+
+	if (boot_cpu_data.family == CPU_FAMILY_SH3) {
+		extern void __weak sh3_cache_init(void);
+
+		sh3_cache_init();
+
+		if ((boot_cpu_data.type == CPU_SH7705) &&
+		    (boot_cpu_data.dcache.sets == 512)) {
+			extern void __weak sh7705_cache_init(void);
+
+			sh7705_cache_init();
+		}
+	}
+
+	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
+	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
+	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
+		extern void __weak sh4_cache_init(void);
+
+		sh4_cache_init();
+	}
+
+	if (boot_cpu_data.family == CPU_FAMILY_SH5) {
+		extern void __weak sh5_cache_init(void);
+
+		sh5_cache_init();
+	}
+
+	emit_cache_params();
+}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 71925946f1e1..781b413ff82d 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -2,7 +2,7 @@
  * Page fault handler for SH with an MMU.
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2003 - 2008  Paul Mundt
+ *  Copyright (C) 2003 - 2009  Paul Mundt
  *
  *  Based on linux/arch/i386/mm/fault.c:
  *   Copyright (C) 1995  Linus Torvalds
@@ -25,18 +25,91 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap)
 {
 	int ret = 0;
 
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
+	if (kprobes_built_in() && !user_mode(regs)) {
 		preempt_disable();
 		if (kprobe_running() && kprobe_fault_handler(regs, trap))
 			ret = 1;
 		preempt_enable();
 	}
-#endif
 
 	return ret;
 }
 
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
+{
+	unsigned index = pgd_index(address);
+	pgd_t *pgd_k;
+	pud_t *pud, *pud_k;
+	pmd_t *pmd, *pmd_k;
+
+	pgd += index;
+	pgd_k = init_mm.pgd + index;
+
+	if (!pgd_present(*pgd_k))
+		return NULL;
+
+	pud = pud_offset(pgd, address);
+	pud_k = pud_offset(pgd_k, address);
+	if (!pud_present(*pud_k))
+		return NULL;
+
+	pmd = pmd_offset(pud, address);
+	pmd_k = pmd_offset(pud_k, address);
+	if (!pmd_present(*pmd_k))
+		return NULL;
+
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, *pmd_k);
+	else {
+		/*
+		 * The page tables are fully synchronised so there must
+		 * be another reason for the fault. Return NULL here to
+		 * signal that we have not taken care of the fault.
+		 */
+		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+		return NULL;
+	}
+
+	return pmd_k;
+}
+
+/*
+ * Handle a fault on the vmalloc or module mapping area
+ */
+static noinline int vmalloc_fault(unsigned long address)
+{
+	pgd_t *pgd_k;
+	pmd_t *pmd_k;
+	pte_t *pte_k;
+
+	/* Make sure we are in vmalloc/module/P3 area: */
+	if (!(address >= VMALLOC_START && address < P3_ADDR_MAX))
+		return -1;
+
+	/*
+	 * Synchronize this task's top level page-table
+	 * with the 'reference' page table.
+	 *
+	 * Do _not_ use "current" here. We might be inside
+	 * an interrupt in the middle of a task switch..
+	 */
+	pgd_k = get_TTB();
+	pmd_k = vmalloc_sync_one(pgd_k, address);
+	if (!pmd_k)
+		return -1;
+
+	pte_k = pte_offset_kernel(pmd_k, address);
+	if (!pte_present(*pte_k))
+		return -1;
+
+	return 0;
+}
+
+static int fault_in_kernel_space(unsigned long address)
+{
+	return address >= TASK_SIZE;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -46,6 +119,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 					unsigned long writeaccess,
 					unsigned long address)
 {
+	unsigned long vec;
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	struct vm_area_struct * vma;
@@ -53,59 +127,30 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	int fault;
 	siginfo_t info;
 
-	/*
-	 * We don't bother with any notifier callbacks here, as they are
-	 * all handled through the __do_page_fault() fast-path.
-	 */
-
 	tsk = current;
+	mm = tsk->mm;
 	si_code = SEGV_MAPERR;
+	vec = lookup_exception_vector();
 
-	if (unlikely(address >= TASK_SIZE)) {
-		/*
-		 * Synchronize this task's top level page-table
-		 * with the 'reference' page table.
-		 *
-		 * Do _not_ use "tsk" here. We might be inside
-		 * an interrupt in the middle of a task switch..
-		 */
-		int offset = pgd_index(address);
-		pgd_t *pgd, *pgd_k;
-		pud_t *pud, *pud_k;
-		pmd_t *pmd, *pmd_k;
-
-		pgd = get_TTB() + offset;
-		pgd_k = swapper_pg_dir + offset;
-
-		if (!pgd_present(*pgd)) {
-			if (!pgd_present(*pgd_k))
-				goto bad_area_nosemaphore;
-			set_pgd(pgd, *pgd_k);
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 */
+	if (unlikely(fault_in_kernel_space(address))) {
+		if (vmalloc_fault(address) >= 0)
 			return;
-		}
-
-		pud = pud_offset(pgd, address);
-		pud_k = pud_offset(pgd_k, address);
-
-		if (!pud_present(*pud)) {
-			if (!pud_present(*pud_k))
-				goto bad_area_nosemaphore;
-			set_pud(pud, *pud_k);
+		if (notify_page_fault(regs, vec))
 			return;
-		}
 
-		pmd = pmd_offset(pud, address);
-		pmd_k = pmd_offset(pud_k, address);
-		if (pmd_present(*pmd) || !pmd_present(*pmd_k))
-			goto bad_area_nosemaphore;
-		set_pmd(pmd, *pmd_k);
-
-		return;
+		goto bad_area_nosemaphore;
 	}
 
-	mm = tsk->mm;
-
-	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+	if (unlikely(notify_page_fault(regs, vec)))
 		return;
 
 	/* Only enable interrupts if they were on before the fault */
@@ -115,8 +160,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
-	 * If we're in an interrupt or have no user
-	 * context, we must not take the fault..
+	 * If we're in an interrupt, have no user context or are running
+	 * in an atomic region then we must not take the fault:
 	 */
 	if (in_atomic() || !mm)
 		goto no_context;
@@ -132,10 +177,11 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		goto bad_area;
 	if (expand_stack(vma, address))
 		goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
 good_area:
 	si_code = SEGV_ACCERR;
 	if (writeaccess) {
@@ -173,10 +219,10 @@ survive:
 	up_read(&mm->mmap_sem);
 	return;
 
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
 bad_area:
 	up_read(&mm->mmap_sem);
 
@@ -272,16 +318,15 @@ do_sigbus:
 /*
  * Called with interrupts disabled.
  */
-asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
-					 unsigned long writeaccess,
-					 unsigned long address)
+asmlinkage int __kprobes
+handle_tlbmiss(struct pt_regs *regs, unsigned long writeaccess,
+	       unsigned long address)
 {
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
@@ -292,40 +337,41 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 		pgd = pgd_offset_k(address);
 	} else {
 		if (unlikely(address >= TASK_SIZE || !current->mm))
-			goto out;
+			return 1;
 
 		pgd = pgd_offset(current->mm, address);
 	}
 
 	pud = pud_offset(pgd, address);
 	if (pud_none_or_clear_bad(pud))
-		goto out;
+		return 1;
 	pmd = pmd_offset(pud, address);
 	if (pmd_none_or_clear_bad(pmd))
-		goto out;
+		return 1;
 	pte = pte_offset_kernel(pmd, address);
 	entry = *pte;
 	if (unlikely(pte_none(entry) || pte_not_present(entry)))
-		goto out;
+		return 1;
 	if (unlikely(writeaccess && !pte_write(entry)))
-		goto out;
+		return 1;
 
 	if (writeaccess)
 		entry = pte_mkdirty(entry);
 	entry = pte_mkyoung(entry);
 
+	set_pte(pte, entry);
+
 #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP)
 	/*
-	 * ITLB is not affected by "ldtlb" instruction.
-	 * So, we need to flush the entry by ourselves.
+	 * SH-4 does not set MMUCR.RC to the corresponding TLB entry in
+	 * the case of an initial page write exception, so we need to
+	 * flush it in order to avoid potential TLB entry duplication.
 	 */
-	local_flush_tlb_one(get_asid(), address & PAGE_MASK);
+	if (writeaccess == 2)
+		local_flush_tlb_one(get_asid(), address & PAGE_MASK);
 #endif
 
-	set_pte(pte, entry);
 	update_mmu_cache(NULL, address, entry);
 
-	ret = 0;
-out:
-	return ret;
+	return 0;
 }
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index bd63b961b2a9..2b356cec2489 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -56,16 +56,7 @@ inline void __do_tlb_refill(unsigned long address,
 	/*
 	 * Set PTEH register
 	 */
-	pteh = address & MMU_VPN_MASK;
-
-	/* Sign extend based on neff. */
-#if (NEFF == 32)
-	/* Faster sign extension */
-	pteh = (unsigned long long)(signed long long)(signed long)pteh;
-#else
-	/* General case */
-	pteh = (pteh & NEFF_SIGN) ? (pteh | NEFF_MASK) : pteh;
-#endif
+	pteh = neff_sign_extend(address & MMU_VPN_MASK);
 
 	/* Set the ASID. */
 	pteh |= get_asid() << PTEH_ASID_SHIFT;
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
new file mode 100644
index 000000000000..cef402678f42
--- /dev/null
+++ b/arch/sh/mm/flush-sh4.c
@@ -0,0 +1,108 @@
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Write back the dirty D-caches, but not invalidate them.
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+static void sh4__flush_wback_region(void *start, int size)
+{
+	reg_size_t aligned_start, v, cnt, end;
+
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+
+	while (cnt) {
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		cnt--;
+	}
+}
+
+/*
+ * Write back the dirty D-caches and invalidate them.
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+static void sh4__flush_purge_region(void *start, int size)
+{
+	reg_size_t aligned_start, v, cnt, end;
+
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+	while (cnt) {
+		__ocbp(v); v += L1_CACHE_BYTES;
+		cnt--;
+	}
+}
+
+/*
+ * No write back please
+ */
+static void sh4__flush_invalidate_region(void *start, int size)
+{
+	reg_size_t aligned_start, v, cnt, end;
+
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+
+	while (cnt) {
+		__ocbi(v); v += L1_CACHE_BYTES;
+		cnt--;
+	}
+}
+
+void __init sh4__flush_region_init(void)
+{
+	__flush_wback_region		= sh4__flush_wback_region;
+	__flush_invalidate_region	= sh4__flush_invalidate_region;
+	__flush_purge_region		= sh4__flush_purge_region;
+}
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index fe532aeaa16d..edc842ff61ed 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -106,27 +106,31 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
-	int pgd_idx;
+	pte_t *pte;
+	int i, j, k;
 	unsigned long vaddr;
 
-	vaddr = start & PMD_MASK;
-	end = (end + PMD_SIZE - 1) & PMD_MASK;
-	pgd_idx = pgd_index(vaddr);
-	pgd = pgd_base + pgd_idx;
-
-	for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) {
-		BUG_ON(pgd_none(*pgd));
-		pud = pud_offset(pgd, 0);
-		BUG_ON(pud_none(*pud));
-		pmd = pmd_offset(pud, 0);
-
-		if (!pmd_present(*pmd)) {
-			pte_t *pte_table;
-			pte_table = (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-			pmd_populate_kernel(&init_mm, pmd, pte_table);
+	vaddr = start;
+	i = __pgd_offset(vaddr);
+	j = __pud_offset(vaddr);
+	k = __pmd_offset(vaddr);
+	pgd = pgd_base + i;
+
+	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
+		pud = (pud_t *)pgd;
+		for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+			pmd = (pmd_t *)pud;
+			for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
+				if (pmd_none(*pmd)) {
+					pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+					pmd_populate_kernel(&init_mm, pmd, pte);
+					BUG_ON(pte != pte_offset_kernel(pmd, 0));
+				}
+				vaddr += PMD_SIZE;
+			}
+			k = 0;
 		}
-
-		vaddr += PMD_SIZE;
+		j = 0;
 	}
 }
 #endif	/* CONFIG_MMU */
@@ -137,7 +141,7 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
-	unsigned long vaddr;
+	unsigned long vaddr, end;
 	int nid;
 
 	/* We don't need to map the kernel through the TLB, as
@@ -155,7 +159,8 @@ void __init paging_init(void)
 	 * pte's will be filled in by __set_fixmap().
 	 */
 	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
-	page_table_range_init(vaddr, 0, swapper_pg_dir);
+	end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
+	page_table_range_init(vaddr, end, swapper_pg_dir);
 
 	kmap_coherent_init();
 
@@ -210,6 +215,9 @@ void __init mem_init(void)
 			high_memory = node_high_memory;
 	}
 
+	/* Set this up early, so we can take care of the zero page */
+	cpu_cache_init();
+
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);
 	__flush_wback_region(empty_zero_page, PAGE_SIZE);
@@ -230,8 +238,6 @@ void __init mem_init(void)
 		datasize >> 10,
 		initsize >> 10);
 
-	p3_cache_init();
-
 	/* Initialize the vDSO */
 	vsyscall_init();
 }
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index da2f4186f2cd..c3250614e3ae 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -57,14 +57,6 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	if (is_pci_memory_fixed_range(phys_addr, size))
 		return (void __iomem *)phys_addr;
 
-#if !defined(CONFIG_PMB_FIXED)
-	/*
-	 * Don't allow anybody to remap normal RAM that we're using..
-	 */
-	if (phys_addr < virt_to_phys(high_memory))
-		return NULL;
-#endif
-
 	/*
 	 * Mappings have to be page-aligned
 	 */
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index 828c8597219d..b16843d02b76 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -94,7 +94,6 @@ static struct resource *shmedia_find_resource(struct resource *root,
 static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
 				      const char *name, unsigned long flags)
 {
-	static int printed_full;
 	struct xresource *xres;
 	struct resource *res;
 	char *tack;
@@ -108,11 +107,8 @@ static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
 		tack = xres->xname;
 		res = &xres->xres;
 	} else {
-		if (!printed_full) {
-			printk(KERN_NOTICE "%s: done with statics, "
+		printk_once(KERN_NOTICE "%s: done with statics, "
 			       "switching to kmalloc\n", __func__);
-			printed_full = 1;
-		}
 		tlen = strlen(name);
 		tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL);
 		if (!tack)
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
new file mode 100644
index 000000000000..16e01b5fed04
--- /dev/null
+++ b/arch/sh/mm/kmap.c
@@ -0,0 +1,65 @@
+/*
+ * arch/sh/mm/kmap.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+#define kmap_get_fixmap_pte(vaddr)                                     \
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
+static pte_t *kmap_coherent_pte;
+
+void __init kmap_coherent_init(void)
+{
+	unsigned long vaddr;
+
+	/* cache the first coherent kmap pte */
+	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
+	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr;
+
+	BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+
+	pagefault_disable();
+
+	idx = FIX_CMAP_END -
+		((addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT);
+	vaddr = __fix_to_virt(idx);
+
+	BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
+	set_pte(kmap_coherent_pte - idx, mk_pte(page, PAGE_KERNEL));
+
+	return (void *)vaddr;
+}
+
+void kunmap_coherent(void *kvaddr)
+{
+	if (kvaddr >= (void *)FIXADDR_START) {
+		unsigned long vaddr = (unsigned long)kvaddr & PAGE_MASK;
+		enum fixed_addresses idx = __virt_to_fix(vaddr);
+
+		/* XXX.. Kill this later, here for sanity at the moment.. */
+		__flush_purge_region((void *)vaddr, PAGE_SIZE);
+
+		pte_clear(&init_mm, vaddr, kmap_coherent_pte - idx);
+		local_flush_tlb_one(get_asid(), vaddr);
+	}
+
+	pagefault_enable();
+}
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
index 1b5fdfb4e0c2..d2984fa42d3d 100644
--- a/arch/sh/mm/mmap.c
+++ b/arch/sh/mm/mmap.c
@@ -14,10 +14,10 @@
 #include <asm/page.h>
 #include <asm/processor.h>
 
-#ifdef CONFIG_MMU
 unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
 EXPORT_SYMBOL(shm_align_mask);
 
+#ifdef CONFIG_MMU
 /*
  * To avoid cache aliases, we map the shared page with same color.
  */
diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/nommu.c
index 71c742b5aee3..ac16c05917ef 100644
--- a/arch/sh/mm/tlb-nommu.c
+++ b/arch/sh/mm/nommu.c
@@ -1,20 +1,41 @@
 /*
- * arch/sh/mm/tlb-nommu.c
+ * arch/sh/mm/nommu.c
  *
- * TLB Operations for MMUless SH.
+ * Various helper routines and stubs for MMUless SH.
  *
- * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2002 - 2009 Paul Mundt
  *
  * Released under the terms of the GNU GPL v2.0.
  */
 #include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
 #include <linux/mm.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
 
 /*
  * Nothing too terribly exciting here ..
  */
+void copy_page(void *to, void *from)
+{
+	memcpy(to, from, PAGE_SIZE);
+}
+
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
+{
+	memcpy(to, from, n);
+	return 0;
+}
+
+__kernel_size_t __clear_user(void *to, __kernel_size_t n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
 void local_flush_tlb_all(void)
 {
 	BUG();
@@ -46,8 +67,21 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	BUG();
 }
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+}
+
+void __init kmap_coherent_init(void)
+{
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	BUG();
+	return NULL;
+}
+
+void kunmap_coherent(void *kvaddr)
 {
 	BUG();
 }
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 095d93bec7cd..9b784fdb947c 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -9,6 +9,7 @@
  */
 #include <linux/module.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
 #include <linux/mm.h>
 #include <linux/numa.h>
 #include <linux/pfn.h>
@@ -26,6 +27,15 @@ EXPORT_SYMBOL_GPL(node_data);
 void __init setup_memory(void)
 {
 	unsigned long free_pfn = PFN_UP(__pa(_end));
+	u64 base = min_low_pfn << PAGE_SHIFT;
+	u64 size = (max_low_pfn << PAGE_SHIFT) - min_low_pfn;
+
+	lmb_add(base, size);
+
+	/* Reserve the LMB regions used by the kernel, initrd, etc.. */
+	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+		    (PFN_PHYS(free_pfn) + PAGE_SIZE - 1) -
+		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
 
 	/*
 	 * Node 0 sets up its pgdat at the first available pfn,
@@ -45,24 +55,23 @@ void __init setup_memory(void)
 
 void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 {
-	unsigned long bootmap_pages, bootmap_start, bootmap_size;
-	unsigned long start_pfn, free_pfn, end_pfn;
+	unsigned long bootmap_pages;
+	unsigned long start_pfn, end_pfn;
+	unsigned long bootmem_paddr;
 
 	/* Don't allow bogus node assignment */
 	BUG_ON(nid > MAX_NUMNODES || nid == 0);
 
-	/*
-	 * The free pfn starts at the beginning of the range, and is
-	 * advanced as necessary for pgdat and node map allocations.
-	 */
-	free_pfn = start_pfn = start >> PAGE_SHIFT;
+	start_pfn = start >> PAGE_SHIFT;
 	end_pfn = end >> PAGE_SHIFT;
 
+	lmb_add(start, end - start);
+
 	__add_active_range(nid, start_pfn, end_pfn);
 
 	/* Node-local pgdat */
-	NODE_DATA(nid) = pfn_to_kaddr(free_pfn);
-	free_pfn += PFN_UP(sizeof(struct pglist_data));
+	NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data),
+					     SMP_CACHE_BYTES, end_pfn));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
 	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
@@ -71,16 +80,17 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 
 	/* Node-local bootmap */
 	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bootmap_start = (unsigned long)pfn_to_kaddr(free_pfn);
-	bootmap_size = init_bootmem_node(NODE_DATA(nid), free_pfn, start_pfn,
-				    end_pfn);
+	bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT,
+				       PAGE_SIZE, end_pfn);
+	init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
+			  start_pfn, end_pfn);
 
 	free_bootmem_with_active_regions(nid, end_pfn);
 
 	/* Reserve the pgdat and bootmap space with the bootmem allocator */
 	reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT,
 			     sizeof(struct pglist_data), BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(nid), free_pfn << PAGE_SHIFT,
+	reserve_bootmem_node(NODE_DATA(nid), bootmem_paddr,
 			     bootmap_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
 
 	/* It's up */
diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c
deleted file mode 100644
index 91ed4e695ff7..000000000000
--- a/arch/sh/mm/pg-nommu.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/sh/mm/pg-nommu.c
- *
- * clear_page()/copy_page() implementation for MMUless SH.
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-
-void copy_page(void *to, void *from)
-{
-	memcpy(to, from, PAGE_SIZE);
-}
-
-void clear_page(void *to)
-{
-	memset(to, 0, PAGE_SIZE);
-}
-
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
-{
-	memcpy(to, from, n);
-	return 0;
-}
-
-__kernel_size_t __clear_user(void *to, __kernel_size_t n)
-{
-	memset(to, 0, n);
-	return 0;
-}
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
deleted file mode 100644
index 2fe14da1f839..000000000000
--- a/arch/sh/mm/pg-sh4.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * arch/sh/mm/pg-sh4.c
- *
- * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2002 - 2007  Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-#define CACHE_ALIAS (current_cpu_data.dcache.alias_mask)
-
-#define kmap_get_fixmap_pte(vaddr)                                     \
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
-static pte_t *kmap_coherent_pte;
-
-void __init kmap_coherent_init(void)
-{
-	unsigned long vaddr;
-
-	/* cache the first coherent kmap pte */
-	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
-	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
-}
-
-static inline void *kmap_coherent(struct page *page, unsigned long addr)
-{
-	enum fixed_addresses idx;
-	unsigned long vaddr, flags;
-	pte_t pte;
-
-	inc_preempt_count();
-
-	idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
-	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
-	pte = mk_pte(page, PAGE_KERNEL);
-
-	local_irq_save(flags);
-	flush_tlb_one(get_asid(), vaddr);
-	local_irq_restore(flags);
-
-	update_mmu_cache(NULL, vaddr, pte);
-
-	set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte);
-
-	return (void *)vaddr;
-}
-
-static inline void kunmap_coherent(struct page *page)
-{
-	dec_preempt_count();
-	preempt_check_resched();
-}
-
-/*
- * clear_user_page
- * @to: P1 address
- * @address: U0 address to be mapped
- * @page: page (virt_to_page(to))
- */
-void clear_user_page(void *to, unsigned long address, struct page *page)
-{
-	__set_bit(PG_mapped, &page->flags);
-
-	clear_page(to);
-	if ((((address & PAGE_MASK) ^ (unsigned long)to) & CACHE_ALIAS))
-		__flush_wback_region(to, PAGE_SIZE);
-}
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long vaddr, void *dst, const void *src,
-		       unsigned long len)
-{
-	void *vto;
-
-	__set_bit(PG_mapped, &page->flags);
-
-	vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-	memcpy(vto, src, len);
-	kunmap_coherent(vto);
-
-	if (vma->vm_flags & VM_EXEC)
-		flush_cache_page(vma, vaddr, page_to_pfn(page));
-}
-
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
-			 unsigned long vaddr, void *dst, const void *src,
-			 unsigned long len)
-{
-	void *vfrom;
-
-	__set_bit(PG_mapped, &page->flags);
-
-	vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-	memcpy(dst, vfrom, len);
-	kunmap_coherent(vfrom);
-}
-
-void copy_user_highpage(struct page *to, struct page *from,
-			unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *vfrom, *vto;
-
-	__set_bit(PG_mapped, &to->flags);
-
-	vto = kmap_atomic(to, KM_USER1);
-	vfrom = kmap_coherent(from, vaddr);
-	copy_page(vto, vfrom);
-	kunmap_coherent(vfrom);
-
-	if (((vaddr ^ (unsigned long)vto) & CACHE_ALIAS))
-		__flush_wback_region(vto, PAGE_SIZE);
-
-	kunmap_atomic(vto, KM_USER1);
-	/* Make sure this page is cleared on other CPU's too before using it */
-	smp_wmb();
-}
-EXPORT_SYMBOL(copy_user_highpage);
-
-/*
- * For SH-4, we have our own implementation for ptep_get_and_clear
- */
-pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	pte_t pte = *ptep;
-
-	pte_clear(mm, addr, ptep);
-	if (!pte_not_present(pte)) {
-		unsigned long pfn = pte_pfn(pte);
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-			struct address_space *mapping = page_mapping(page);
-			if (!mapping || !mapping_writably_mapped(mapping))
-				__clear_bit(PG_mapped, &page->flags);
-		}
-	}
-	return pte;
-}
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
deleted file mode 100644
index eaf25147194c..000000000000
--- a/arch/sh/mm/pg-sh7705.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * arch/sh/mm/pg-sh7705.c
- *
- * Copyright (C) 1999, 2000  Niibe Yutaka
- * Copyright (C) 2004  Alex Song
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/threads.h>
-#include <linux/fs.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-static inline void __flush_purge_virtual_region(void *p1, void *virt, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-	unsigned long p1_begin;
-
-
-	begin = L1_CACHE_ALIGN((unsigned long)virt);
-	end = L1_CACHE_ALIGN((unsigned long)virt + size);
-
-	p1_begin = (unsigned long)p1 & ~(L1_CACHE_BYTES - 1);
-
-	/* do this the slow way as we may not have TLB entries
-	 * for virt yet. */
-	for (v = begin; v < end; v += L1_CACHE_BYTES) {
-		unsigned long p;
-	        unsigned long ways, addr;
-
-		p = __pa(p1_begin);
-
-	        ways = current_cpu_data.dcache.ways;
-		addr = CACHE_OC_ADDRESS_ARRAY;
-
-		do {
-			unsigned long data;
-
-			addr |= (v & current_cpu_data.dcache.entry_mask);
-
-			data = ctrl_inl(addr);
-			if ((data & CACHE_PHYSADDR_MASK) ==
-			       (p & CACHE_PHYSADDR_MASK)) {
-				data &= ~(SH_CACHE_UPDATED|SH_CACHE_VALID);
-				ctrl_outl(data, addr);
-			}
-
-			addr += current_cpu_data.dcache.way_incr;
-		} while (--ways);
-
-		p1_begin += L1_CACHE_BYTES;
-	}
-}
-
-/*
- * clear_user_page
- * @to: P1 address
- * @address: U0 address to be mapped
- */
-void clear_user_page(void *to, unsigned long address, struct page *pg)
-{
-	struct page *page = virt_to_page(to);
-
-	__set_bit(PG_mapped, &page->flags);
-	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
-		clear_page(to);
-		__flush_wback_region(to, PAGE_SIZE);
-	} else {
-		__flush_purge_virtual_region(to,
-					     (void *)(address & 0xfffff000),
-					     PAGE_SIZE);
-		clear_page(to);
-		__flush_wback_region(to, PAGE_SIZE);
-	}
-}
-
-/*
- * copy_user_page
- * @to: P1 address
- * @from: P1 address
- * @address: U0 address to be mapped
- */
-void copy_user_page(void *to, void *from, unsigned long address, struct page *pg)
-{
-	struct page *page = virt_to_page(to);
-
-
-	__set_bit(PG_mapped, &page->flags);
-	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
-		copy_page(to, from);
-		__flush_wback_region(to, PAGE_SIZE);
-	} else {
-		__flush_purge_virtual_region(to,
-					     (void *)(address & 0xfffff000),
-					     PAGE_SIZE);
-		copy_page(to, from);
-		__flush_wback_region(to, PAGE_SIZE);
-	}
-}
-
-/*
- * For SH7705, we have our own implementation for ptep_get_and_clear
- * Copied from pg-sh4.c
- */
-pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	pte_t pte = *ptep;
-
-	pte_clear(mm, addr, ptep);
-	if (!pte_not_present(pte)) {
-		unsigned long pfn = pte_pfn(pte);
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-			struct address_space *mapping = page_mapping(page);
-			if (!mapping || !mapping_writably_mapped(mapping))
-				__clear_bit(PG_mapped, &page->flags);
-		}
-	}
-
-	return pte;
-}
-
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
index 2aab3ea934d7..409b7c2b4b9d 100644
--- a/arch/sh/mm/tlb-pteaex.c
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -16,34 +16,16 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
-	unsigned long flags;
-	unsigned long pteval;
-	unsigned long vpn;
+	unsigned long flags, pteval, vpn;
 
-	/* Ptrace may call this routine. */
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
 	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
-#ifndef CONFIG_CACHE_OFF
-	{
-		unsigned long pfn = pte_pfn(pte);
-
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-
-			if (!test_bit(PG_mapped, &page->flags)) {
-				unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-				__flush_wback_region((void *)P1SEGADDR(phys),
-						     PAGE_SIZE);
-				__set_bit(PG_mapped, &page->flags);
-			}
-		}
-	}
-#endif
-
 	local_irq_save(flags);
 
 	/* Set PTEH register */
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 17cb7c3adf22..ace8e6d2f59d 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -27,32 +27,16 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
-	unsigned long flags;
-	unsigned long pteval;
-	unsigned long vpn;
+	unsigned long flags, pteval, vpn;
 
-	/* Ptrace may call this routine. */
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
 	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
-#if defined(CONFIG_SH7705_CACHE_32KB)
-	{
-		struct page *page = pte_page(pte);
-		unsigned long pfn = pte_pfn(pte);
-
-		if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) {
-			unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-
-			__flush_wback_region((void *)P1SEGADDR(phys),
-					     PAGE_SIZE);
-			__set_bit(PG_mapped, &page->flags);
-		}
-	}
-#endif
-
 	local_irq_save(flags);
 
 	/* Set PTEH register */
@@ -93,4 +77,3 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	for (i = 0; i < ways; i++)
 		ctrl_outl(data, addr + (i << 8));
 }
-
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index f0c7b7397fa6..8cf550e2570f 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -15,34 +15,16 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
-	unsigned long flags;
-	unsigned long pteval;
-	unsigned long vpn;
+	unsigned long flags, pteval, vpn;
 
-	/* Ptrace may call this routine. */
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
 	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
-#ifndef CONFIG_CACHE_OFF
-	{
-		unsigned long pfn = pte_pfn(pte);
-
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-
-			if (!test_bit(PG_mapped, &page->flags)) {
-				unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-				__flush_wback_region((void *)P1SEGADDR(phys),
-						     PAGE_SIZE);
-				__set_bit(PG_mapped, &page->flags);
-			}
-		}
-	}
-#endif
-
 	local_irq_save(flags);
 
 	/* Set PTEH register */
@@ -61,9 +43,12 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	 */
 	ctrl_outl(pte.pte_high, MMU_PTEA);
 #else
-	if (cpu_data->flags & CPU_HAS_PTEA)
-		/* TODO: make this look less hacky */
-		ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
+	if (cpu_data->flags & CPU_HAS_PTEA) {
+		/* The last 3 bits and the first one of pteval contains
+		 * the PTEA timing control and space attribute bits
+		 */
+		ctrl_outl(copy_ptea_attributes(pteval), MMU_PTEA);
+	}
 #endif
 
 	/* Set PTEL register */
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index dae131243bcc..fdb64e41ec50 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -117,26 +117,15 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry)
  * Load up a virtual<->physical translation for @eaddr<->@paddr in the
  * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry).
  */
-inline void sh64_setup_tlb_slot(unsigned long long config_addr,
-				unsigned long eaddr,
-				unsigned long asid,
-				unsigned long paddr)
+void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
+			 unsigned long asid, unsigned long paddr)
 {
 	unsigned long long pteh, ptel;
 
-	/* Sign extension */
-#if (NEFF == 32)
-	pteh = (unsigned long long)(signed long long)(signed long) eaddr;
-#else
-#error "Can't sign extend more than 32 bits yet"
-#endif
+	pteh = neff_sign_extend(eaddr);
 	pteh &= PAGE_MASK;
 	pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
-#if (NEFF == 32)
-	ptel = (unsigned long long)(signed long long)(signed long) paddr;
-#else
-#error "Can't sign extend more than 32 bits yet"
-#endif
+	ptel = neff_sign_extend(paddr);
 	ptel &= PAGE_MASK;
 	ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE);
 
@@ -152,5 +141,5 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr,
  *
  * Teardown any existing mapping in the TLB slot @config_addr.
  */
-inline void sh64_teardown_tlb_slot(unsigned long long config_addr)
+void sh64_teardown_tlb_slot(unsigned long long config_addr)
 	__attribute__ ((alias("__flush_tlb_slot")));
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index 3ce40ea34824..2dcc48528f7a 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -329,22 +329,6 @@ do_sigbus:
 		goto no_context;
 }
 
-void update_mmu_cache(struct vm_area_struct * vma,
-			unsigned long address, pte_t pte)
-{
-	/*
-	 * This appears to get called once for every pte entry that gets
-	 * established => I don't think it's efficient to try refilling the
-	 * TLBs with the pages - some may not get accessed even.  Also, for
-	 * executable pages, it is impossible to determine reliably here which
-	 * TLB they should be mapped into (or both even).
-	 *
-	 * So, just do nothing here and handle faults on demand.  In the
-	 * TLBMISS handling case, the refill is now done anyway after the pte
-	 * has been fixed up, so that deals with most useful cases.
-	 */
-}
-
 void local_flush_tlb_one(unsigned long asid, unsigned long page)
 {
 	unsigned long long match, pteh=0, lpage;
@@ -353,7 +337,7 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	/*
 	 * Sign-extend based on neff.
 	 */
-	lpage = (page & NEFF_SIGN) ? (page | NEFF_MASK) : page;
+	lpage = neff_sign_extend(page);
 	match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
 	match |= lpage;
 
@@ -482,3 +466,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
         /* FIXME: Optimize this later.. */
         flush_tlb_all();
 }
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+}
diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
index 9499a2914f89..2bc74de23f08 100644
--- a/arch/sh/oprofile/backtrace.c
+++ b/arch/sh/oprofile/backtrace.c
@@ -17,9 +17,43 @@
 #include <linux/sched.h>
 #include <linux/kallsyms.h>
 #include <linux/mm.h>
+#include <asm/unwinder.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/sections.h>
+#include <asm/stacktrace.h>
+
+static void backtrace_warning_symbol(void *data, char *msg,
+				     unsigned long symbol)
+{
+	/* Ignore warnings */
+}
+
+static void backtrace_warning(void *data, char *msg)
+{
+	/* Ignore warnings */
+}
+
+static int backtrace_stack(void *data, char *name)
+{
+	/* Yes, we want all stacks */
+	return 0;
+}
+
+static void backtrace_address(void *data, unsigned long addr, int reliable)
+{
+	unsigned int *depth = data;
+
+	if ((*depth)--)
+		oprofile_add_trace(addr);
+}
+
+static struct stacktrace_ops backtrace_ops = {
+	.warning = backtrace_warning,
+	.warning_symbol = backtrace_warning_symbol,
+	.stack = backtrace_stack,
+	.address = backtrace_address,
+};
 
 /* Limit to stop backtracing too far. */
 static int backtrace_limit = 20;
@@ -47,50 +81,6 @@ user_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
 	return stackaddr;
 }
 
-/*
- * |             | /\ Higher addresses
- * |             |
- * --------------- stack base (address of current_thread_info)
- * | thread info |
- * .             .
- * |    stack    |
- * --------------- saved regs->regs[15] value if valid
- * .             .
- * --------------- struct pt_regs stored on stack (struct pt_regs *)
- * |             |
- * .             .
- * |             |
- * --------------- ???
- * |             |
- * |             | \/ Lower addresses
- *
- * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values
- */
-static int valid_kernel_stack(unsigned long *stackaddr, struct pt_regs *regs)
-{
-	unsigned long stack = (unsigned long)regs;
-	unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
-
-	return ((unsigned long)stackaddr > stack) && ((unsigned long)stackaddr < stack_base);
-}
-
-static unsigned long *
-kernel_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
-{
-	unsigned long addr;
-
-	/*
-	 * If not a valid kernel address, keep going till we find one
-	 * or the SP stops being a valid address.
-	 */
-	do {
-		addr = *stackaddr++;
-		oprofile_add_trace(addr);
-	} while (valid_kernel_stack(stackaddr, regs));
-
-	return stackaddr;
-}
-
 void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	unsigned long *stackaddr;
@@ -103,9 +93,9 @@ void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 
 	stackaddr = (unsigned long *)regs->regs[15];
 	if (!user_mode(regs)) {
-		while (depth-- && valid_kernel_stack(stackaddr, regs))
-			stackaddr = kernel_backtrace(stackaddr, regs);
-
+		if (depth)
+			unwind_stack(NULL, regs, stackaddr,
+				     &backtrace_ops, &depth);
 		return;
 	}
 
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index fec3a53b8650..6639b25d8d57 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -53,6 +53,9 @@ RSK7203			SH_RSK7203
 AP325RXA		SH_AP325RXA
 SH7763RDP		SH_SH7763RDP
 SH7785LCR		SH_SH7785LCR
+SH7785LCR_PT		SH_SH7785LCR_PT
 URQUELL			SH_URQUELL
 ESPT			SH_ESPT
 POLARIS			SH_POLARIS
+KFR2R09			SH_KFR2R09
+ECOVEC			SH_ECOVEC
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index a0f62a808edb..983d59824a28 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Tue Aug 18 23:45:52 2009
+# Linux kernel version: 2.6.31
+# Wed Sep 16 00:03:43 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -39,11 +39,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,10 +88,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_STRIP_ASM_SYMS is not set
@@ -102,6 +105,8 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,6 +174,7 @@ CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_SUN_PM=y
 # CONFIG_SPARC_LED is not set
 CONFIG_SERIAL_CONSOLE=y
+# CONFIG_SPARC_LEON is not set
 
 #
 # Bus options (PCI etc.)
@@ -259,6 +265,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -288,6 +295,7 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -295,7 +303,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -426,6 +433,7 @@ CONFIG_SCSI_QLOGICPTI=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_SUNESP=y
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -524,12 +532,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -569,11 +572,11 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-CONFIG_KEYBOARD_SUNKBD=m
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
@@ -581,6 +584,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -708,12 +712,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Console display driver support
 #
-# CONFIG_PROM_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -814,6 +816,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -877,7 +880,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -984,14 +986,17 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_KGDB=y
@@ -1014,7 +1019,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1057,11 +1061,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index fdddf7a6f725..f80b881dfea7 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Tue Aug 18 23:56:02 2009
+# Linux kernel version: 2.6.31
+# Tue Sep 15 17:06:03 2009
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -19,7 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -48,11 +48,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_GROUP_SCHED=y
@@ -96,10 +97,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+CONFIG_PERF_COUNTERS=y
+CONFIG_EVENT_PROFILE=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -119,7 +123,9 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -317,6 +323,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -349,6 +356,7 @@ CONFIG_NET_TCPPROBE=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -356,7 +364,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -549,6 +556,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SUNESP is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -704,12 +712,7 @@ CONFIG_NIU=m
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -768,11 +771,11 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=y
 CONFIG_KEYBOARD_LKKBD=m
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -780,6 +783,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -883,7 +887,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
 
@@ -1102,7 +1105,6 @@ CONFIG_FB_ATY_GX=y
 #
 # Console display driver support
 #
-# CONFIG_PROM_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -1124,6 +1126,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_SUN_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1232,7 +1235,6 @@ CONFIG_SND_SUN_CS4231=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1256,6 +1258,7 @@ CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1289,6 +1292,7 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
@@ -1379,6 +1383,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1493,6 +1498,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1553,7 +1559,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1656,12 +1661,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -1692,6 +1699,7 @@ CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1716,7 +1724,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1759,11 +1766,13 @@ CONFIG_CRYPTO_XTS=m
 #
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index e5ea8d332421..26cd25c08399 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -52,13 +52,12 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
 	.newidle_idx		= 0, 			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
+	.wake_idx		= 0,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 }
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 16a47ffe03c1..9be2af55c5cd 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -268,8 +268,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
-#elif defined(CONFIG_PROM_CONSOLE)
-	conswitchp = &prom_con;
 #endif
 	boot_flags_init(*cmdline_p);
 
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index f2bcfd2967d7..21180339cb09 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -295,8 +295,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
-#elif defined(CONFIG_PROM_CONSOLE)
-	conswitchp = &prom_con;
 #endif
 
 	idprom_init();
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e98e81a04971..e5deee2dfcfe 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -783,41 +783,17 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	  increased on these systems.
 
 config X86_MCE
-	bool "Machine Check Exception"
+	bool "Machine Check / overheating reporting"
 	---help---
-	  Machine Check Exception support allows the processor to notify the
-	  kernel if it detects a problem (e.g. overheating, component failure).
+	  Machine Check support allows the processor to notify the
+	  kernel if it detects a problem (e.g. overheating, data corruption).
 	  The action the kernel takes depends on the severity of the problem,
-	  ranging from a warning message on the console, to halting the machine.
-	  Your processor must be a Pentium or newer to support this - check the
-	  flags in /proc/cpuinfo for mce.  Note that some older Pentium systems
-	  have a design flaw which leads to false MCE events - hence MCE is
-	  disabled on all P5 processors, unless explicitly enabled with "mce"
-	  as a boot argument.  Similarly, if MCE is built in and creates a
-	  problem on some new non-standard machine, you can boot with "nomce"
-	  to disable it.  MCE support simply ignores non-MCE processors like
-	  the 386 and 486, so nearly everyone can say Y here.
-
-config X86_OLD_MCE
-	depends on X86_32 && X86_MCE
-	bool "Use legacy machine check code (will go away)"
-	default n
-	select X86_ANCIENT_MCE
-	---help---
-	  Use the old i386 machine check code. This is merely intended for
-	  testing in a transition period. Try this if you run into any machine
-	  check related software problems, but report the problem to
-	  linux-kernel.  When in doubt say no.
-
-config X86_NEW_MCE
-	depends on X86_MCE
-	bool
-	default y if (!X86_OLD_MCE && X86_32) || X86_64
+	  ranging from warning messages to halting the machine.
 
 config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@@ -825,14 +801,14 @@ config X86_MCE_INTEL
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
 config X86_ANCIENT_MCE
 	def_bool n
-	depends on X86_32
+	depends on X86_32 && X86_MCE
 	prompt "Support for old Pentium 5 / WinChip machine checks"
 	---help---
 	  Include support for machine check handling on old Pentium 5 or WinChip
@@ -845,36 +821,16 @@ config X86_MCE_THRESHOLD
 	default y
 
 config X86_MCE_INJECT
-	depends on X86_NEW_MCE
+	depends on X86_MCE
 	tristate "Machine check injector support"
 	---help---
 	  Provide support for injecting machine checks for testing purposes.
 	  If you don't know what a machine check is and you don't do kernel
 	  QA it is safe to say n.
 
-config X86_MCE_NONFATAL
-	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_OLD_MCE
-	---help---
-	  Enabling this feature starts a timer that triggers every 5 seconds which
-	  will look at the machine check registers to see if anything happened.
-	  Non-fatal problems automatically get corrected (but still logged).
-	  Disable this if you don't want to see these messages.
-	  Seeing the messages this option prints out may be indicative of dying
-	  or out-of-spec (ie, overclocked) hardware.
-	  This option only does something on certain CPUs.
-	  (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
-	bool "check for P4 thermal throttling interrupt."
-	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
-	---help---
-	  Enabling this feature will cause a message to be printed when the P4
-	  enters thermal throttling.
-
 config X86_THERMAL_VECTOR
 	def_bool y
-	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+	depends on X86_MCE_INTEL
 
 config VM86
 	bool "Enable VM86 support" if EMBEDDED
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 847fee6493a2..9cfc88b97742 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -96,6 +96,7 @@
 #define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
 #define X86_FEATURE_EXTD_APICID	(3*32+26) /* has extended APICID (8 bits) */
 #define X86_FEATURE_AMD_DCM     (3*32+27) /* multi-node processor */
+#define X86_FEATURE_APERFMPERF	(3*32+28) /* APERFMPERF */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 83c1bc8d2e8a..456a304b8172 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -299,6 +299,8 @@ do {									\
 
 #ifdef CONFIG_X86_32
 
+#define STACK_RND_MASK (0x7ff)
+
 #define VDSO_HIGH_BASE		(__fix_to_virt(FIX_VDSO))
 
 #define ARCH_DLINFO		ARCH_DLINFO_IA32(vdso_enabled)
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index ff8cbfa07851..5e3f2044f0d3 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -61,7 +61,7 @@ BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
 BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
 #endif
 
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 BUILD_INTERRUPT(mce_self_interrupt,MCE_SELF_VECTOR)
 #endif
 
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 5cdd8d100ec9..b608a64c5814 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -9,7 +9,7 @@
  */
 
 #define MCG_BANKCNT_MASK	0xff         /* Number of Banks */
-#define MCG_CTL_P		(1ULL<<8)    /* MCG_CAP register available */
+#define MCG_CTL_P		(1ULL<<8)    /* MCG_CTL register available */
 #define MCG_EXT_P		(1ULL<<9)    /* Extended registers available */
 #define MCG_CMCI_P		(1ULL<<10)   /* CMCI supported */
 #define MCG_EXT_CNT_MASK	0xff0000     /* Number of Extended registers */
@@ -38,6 +38,14 @@
 #define MCM_ADDR_MEM	 3	/* memory address */
 #define MCM_ADDR_GENERIC 7	/* generic */
 
+#define MCJ_CTX_MASK		3
+#define MCJ_CTX(flags)		((flags) & MCJ_CTX_MASK)
+#define MCJ_CTX_RANDOM		0    /* inject context: random */
+#define MCJ_CTX_PROCESS		1    /* inject context: process */
+#define MCJ_CTX_IRQ		2    /* inject context: IRQ */
+#define MCJ_NMI_BROADCAST	4    /* do NMI broadcasting */
+#define MCJ_EXCEPTION		8    /* raise as exception */
+
 /* Fields are zero when not available */
 struct mce {
 	__u64 status;
@@ -48,8 +56,8 @@ struct mce {
 	__u64 tsc;	/* cpu time stamp counter */
 	__u64 time;	/* wall time_t when error was detected */
 	__u8  cpuvendor;	/* cpu vendor as encoded in system.h */
-	__u8  pad1;
-	__u16 pad2;
+	__u8  inject_flags;	/* software inject flags */
+	__u16  pad;
 	__u32 cpuid;	/* CPUID 1 EAX */
 	__u8  cs;		/* code segment */
 	__u8  bank;	/* machine check bank */
@@ -115,13 +123,6 @@ void mcheck_init(struct cpuinfo_x86 *c);
 static inline void mcheck_init(struct cpuinfo_x86 *c) {}
 #endif
 
-#ifdef CONFIG_X86_OLD_MCE
-extern int nr_mce_banks;
-void amd_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
-#endif
-
 #ifdef CONFIG_X86_ANCIENT_MCE
 void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
 void winchip_mcheck_init(struct cpuinfo_x86 *c);
@@ -137,10 +138,11 @@ void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, mce_dev);
 
 /*
- * To support more than 128 would need to escape the predefined
- * Linux defined extended banks first.
+ * Maximum banks number.
+ * This is the limit of the current register layout on
+ * Intel CPUs.
  */
-#define MAX_NR_BANKS (MCE_EXTENDED_BANK - 1)
+#define MAX_NR_BANKS 32
 
 #ifdef CONFIG_X86_MCE_INTEL
 extern int mce_cmci_disabled;
@@ -208,11 +210,7 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 void intel_init_thermal(struct cpuinfo_x86 *c);
 
-#ifdef CONFIG_X86_NEW_MCE
 void mce_log_therm_throt_event(__u64 status);
-#else
-static inline void mce_log_therm_throt_event(__u64 status) {}
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index bd5549034a95..4ffe09b2ad75 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -81,8 +81,15 @@
 #define MSR_IA32_MC0_ADDR		0x00000402
 #define MSR_IA32_MC0_MISC		0x00000403
 
+#define MSR_IA32_MCx_CTL(x)		(MSR_IA32_MC0_CTL + 4*(x))
+#define MSR_IA32_MCx_STATUS(x)		(MSR_IA32_MC0_STATUS + 4*(x))
+#define MSR_IA32_MCx_ADDR(x)		(MSR_IA32_MC0_ADDR + 4*(x))
+#define MSR_IA32_MCx_MISC(x)		(MSR_IA32_MC0_MISC + 4*(x))
+
 /* These are consecutive and not in the normal 4er MCE bank block */
 #define MSR_IA32_MC0_CTL2		0x00000280
+#define MSR_IA32_MCx_CTL2(x)		(MSR_IA32_MC0_CTL2 + (x))
+
 #define CMCI_EN			(1ULL << 30)
 #define CMCI_THRESHOLD_MASK		0xffffULL
 
@@ -215,6 +222,10 @@
 
 #define THERM_STATUS_PROCHOT		(1 << 0)
 
+#define MSR_THERM2_CTL			0x0000019d
+
+#define MSR_THERM2_CTL_TM_SELECT	(1ULL << 16)
+
 #define MSR_IA32_MISC_ENABLE		0x000001a0
 
 /* MISC_ENABLE bits: architectural */
diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h
index ad2668ee1aa7..6d8723a766cc 100644
--- a/arch/x86/include/asm/nops.h
+++ b/arch/x86/include/asm/nops.h
@@ -65,6 +65,8 @@
    6: osp nopl 0x00(%eax,%eax,1)
    7: nopl 0x00000000(%eax)
    8: nopl 0x00000000(%eax,%eax,1)
+   Note: All the above are assumed to be a single instruction.
+	There is kernel code that depends on this.
 */
 #define P6_NOP1	GENERIC_NOP1
 #define P6_NOP2	".byte 0x66,0x90\n"
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index e08ea043e085..c3429e8b2424 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -27,6 +27,7 @@ struct mm_struct;
 #include <linux/cpumask.h>
 #include <linux/cache.h>
 #include <linux/threads.h>
+#include <linux/math64.h>
 #include <linux/init.h>
 
 /*
@@ -1020,4 +1021,35 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
 extern int get_tsc_mode(unsigned long adr);
 extern int set_tsc_mode(unsigned int val);
 
+extern int amd_get_nb_id(int cpu);
+
+struct aperfmperf {
+	u64 aperf, mperf;
+};
+
+static inline void get_aperfmperf(struct aperfmperf *am)
+{
+	WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_APERFMPERF));
+
+	rdmsrl(MSR_IA32_APERF, am->aperf);
+	rdmsrl(MSR_IA32_MPERF, am->mperf);
+}
+
+#define APERFMPERF_SHIFT 10
+
+static inline
+unsigned long calc_aperfmperf_ratio(struct aperfmperf *old,
+				    struct aperfmperf *new)
+{
+	u64 aperf = new->aperf - old->aperf;
+	u64 mperf = new->mperf - old->mperf;
+	unsigned long ratio = aperf;
+
+	mperf >>= APERFMPERF_SHIFT;
+	if (mperf)
+		ratio = div64_u64(aperf, mperf);
+
+	return ratio;
+}
+
 #endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 26d06e052a18..6f0695d744bf 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -116,15 +116,11 @@ extern unsigned long node_remap_size[];
 
 # define SD_CACHE_NICE_TRIES	1
 # define SD_IDLE_IDX		1
-# define SD_NEWIDLE_IDX		2
-# define SD_FORKEXEC_IDX	0
 
 #else
 
 # define SD_CACHE_NICE_TRIES	2
 # define SD_IDLE_IDX		2
-# define SD_NEWIDLE_IDX		2
-# define SD_FORKEXEC_IDX	1
 
 #endif
 
@@ -137,22 +133,20 @@ extern unsigned long node_remap_size[];
 	.cache_nice_tries	= SD_CACHE_NICE_TRIES,			\
 	.busy_idx		= 3,					\
 	.idle_idx		= SD_IDLE_IDX,				\
-	.newidle_idx		= SD_NEWIDLE_IDX,			\
-	.wake_idx		= 1,					\
-	.forkexec_idx		= SD_FORKEXEC_IDX,			\
+	.newidle_idx		= 0,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
 				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
-				| 0*SD_WAKE_IDLE			\
+				| 0*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
-				| 1*SD_WAKE_BALANCE			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 1*SD_SERIALIZE			\
-				| 1*SD_WAKE_IDLE_FAR			\
 				| 0*SD_PREFER_SIBLING			\
 				,					\
 	.last_balance		= jiffies,				\
diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h
index dc27a69e5d2a..3d61e204826f 100644
--- a/arch/x86/include/asm/vgtod.h
+++ b/arch/x86/include/asm/vgtod.h
@@ -21,6 +21,7 @@ struct vsyscall_gtod_data {
 		u32	shift;
 	} clock;
 	struct timespec wall_to_monotonic;
+	struct timespec wall_time_coarse;
 };
 extern struct vsyscall_gtod_data __vsyscall_gtod_data
 __section_vsyscall_gtod_data;
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index db7220220d09..cb66a22d98ad 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -66,7 +66,7 @@ static inline unsigned int get_nmi_count(int cpu)
 
 static inline int mce_in_progress(void)
 {
-#if defined(CONFIG_X86_NEW_MCE)
+#if defined(CONFIG_X86_MCE)
 	return atomic_read(&mce_entry) > 0;
 #endif
 	return 0;
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index c1f253dac155..8dd30638fe44 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -13,7 +13,7 @@ CFLAGS_common.o		:= $(nostackp)
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
-obj-y			+= vmware.o hypervisor.o
+obj-y			+= vmware.o hypervisor.o sched.o
 
 obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 22a47c82f3c0..f32fa71ccf97 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -333,6 +333,16 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 #endif
 }
 
+int amd_get_nb_id(int cpu)
+{
+	int id = 0;
+#ifdef CONFIG_SMP
+	id = per_cpu(cpu_llc_id, cpu);
+#endif
+	return id;
+}
+EXPORT_SYMBOL_GPL(amd_get_nb_id);
+
 static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 {
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index ae9b503220ca..7bb676c533aa 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -60,7 +60,6 @@ enum {
 };
 
 #define INTEL_MSR_RANGE		(0xffff)
-#define CPUID_6_ECX_APERFMPERF_CAPABILITY	(0x1)
 
 struct acpi_cpufreq_data {
 	struct acpi_processor_performance *acpi_data;
@@ -71,11 +70,7 @@ struct acpi_cpufreq_data {
 
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
 
-struct acpi_msr_data {
-	u64 saved_aperf, saved_mperf;
-};
-
-static DEFINE_PER_CPU(struct acpi_msr_data, msr_data);
+static DEFINE_PER_CPU(struct aperfmperf, old_perf);
 
 DEFINE_TRACE(power_mark);
 
@@ -244,23 +239,12 @@ static u32 get_cur_val(const struct cpumask *mask)
 	return cmd.val;
 }
 
-struct perf_pair {
-	union {
-		struct {
-			u32 lo;
-			u32 hi;
-		} split;
-		u64 whole;
-	} aperf, mperf;
-};
-
 /* Called via smp_call_function_single(), on the target CPU */
 static void read_measured_perf_ctrs(void *_cur)
 {
-	struct perf_pair *cur = _cur;
+	struct aperfmperf *am = _cur;
 
-	rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi);
-	rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi);
+	get_aperfmperf(am);
 }
 
 /*
@@ -279,63 +263,17 @@ static void read_measured_perf_ctrs(void *_cur)
 static unsigned int get_measured_perf(struct cpufreq_policy *policy,
 				      unsigned int cpu)
 {
-	struct perf_pair readin, cur;
-	unsigned int perf_percent;
+	struct aperfmperf perf;
+	unsigned long ratio;
 	unsigned int retval;
 
-	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
+	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1))
 		return 0;
 
-	cur.aperf.whole = readin.aperf.whole -
-				per_cpu(msr_data, cpu).saved_aperf;
-	cur.mperf.whole = readin.mperf.whole -
-				per_cpu(msr_data, cpu).saved_mperf;
-	per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole;
-	per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole;
-
-#ifdef __i386__
-	/*
-	 * We dont want to do 64 bit divide with 32 bit kernel
-	 * Get an approximate value. Return failure in case we cannot get
-	 * an approximate value.
-	 */
-	if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) {
-		int shift_count;
-		u32 h;
-
-		h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi);
-		shift_count = fls(h);
-
-		cur.aperf.whole >>= shift_count;
-		cur.mperf.whole >>= shift_count;
-	}
-
-	if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {
-		int shift_count = 7;
-		cur.aperf.split.lo >>= shift_count;
-		cur.mperf.split.lo >>= shift_count;
-	}
-
-	if (cur.aperf.split.lo && cur.mperf.split.lo)
-		perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo;
-	else
-		perf_percent = 0;
+	ratio = calc_aperfmperf_ratio(&per_cpu(old_perf, cpu), &perf);
+	per_cpu(old_perf, cpu) = perf;
 
-#else
-	if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) {
-		int shift_count = 7;
-		cur.aperf.whole >>= shift_count;
-		cur.mperf.whole >>= shift_count;
-	}
-
-	if (cur.aperf.whole && cur.mperf.whole)
-		perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole;
-	else
-		perf_percent = 0;
-
-#endif
-
-	retval = (policy->cpuinfo.max_freq * perf_percent) / 100;
+	retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT;
 
 	return retval;
 }
@@ -588,6 +526,21 @@ static const struct dmi_system_id sw_any_bug_dmi_table[] = {
 	},
 	{ }
 };
+
+static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
+{
+	/* http://www.intel.com/Assets/PDF/specupdate/314554.pdf
+	 * AL30: A Machine Check Exception (MCE) Occurring during an
+	 * Enhanced Intel SpeedStep Technology Ratio Change May Cause
+	 * Both Processor Cores to Lock Up when HT is enabled*/
+	if (c->x86_vendor == X86_VENDOR_INTEL) {
+		if ((c->x86 == 15) &&
+		    (c->x86_model == 6) &&
+		    (c->x86_mask == 8) && smt_capable())
+			return -ENODEV;
+		}
+	return 0;
+}
 #endif
 
 static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
@@ -602,6 +555,12 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	dprintk("acpi_cpufreq_cpu_init\n");
 
+#ifdef CONFIG_SMP
+	result = acpi_cpufreq_blacklist(c);
+	if (result)
+		return result;
+#endif
+
 	data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -731,12 +690,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	acpi_processor_notify_smm(THIS_MODULE);
 
 	/* Check for APERF/MPERF support in hardware */
-	if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) {
-		unsigned int ecx;
-		ecx = cpuid_ecx(6);
-		if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY)
-			acpi_cpufreq_driver.getavg = get_measured_perf;
-	}
+	if (cpu_has(c, X86_FEATURE_APERFMPERF))
+		acpi_cpufreq_driver.getavg = get_measured_perf;
 
 	dprintk("CPU%u - ACPI performance management activated.\n", cpu);
 	for (i = 0; i < perf->state_count; i++)
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 2a50ef891000..6394aa5c7985 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -605,9 +605,10 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
 	return 0;
 }
 
-static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry)
+static void invalidate_entry(struct cpufreq_frequency_table *powernow_table,
+		unsigned int entry)
 {
-	data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
 }
 
 static void print_basics(struct powernow_k8_data *data)
@@ -854,6 +855,10 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 		goto err_out;
 	}
 
+	/* fill in data */
+	data->numps = data->acpi_data.state_count;
+	powernow_k8_acpi_pst_values(data, 0);
+
 	if (cpu_family == CPU_HW_PSTATE)
 		ret_val = fill_powernow_table_pstate(data, powernow_table);
 	else
@@ -866,11 +871,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	powernow_table[data->acpi_data.state_count].index = 0;
 	data->powernow_table = powernow_table;
 
-	/* fill in data */
-	data->numps = data->acpi_data.state_count;
 	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
 		print_basics(data);
-	powernow_k8_acpi_pst_values(data, 0);
 
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);
@@ -914,13 +916,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 					"bad value %d.\n", i, index);
 			printk(KERN_ERR PFX "Please report to BIOS "
 					"manufacturer\n");
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
 		if (!(hi & HW_PSTATE_VALID_MASK)) {
 			dprintk("invalid pstate %d, ignoring\n", index);
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 
@@ -941,7 +943,6 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
-	int cntlofreq = 0;
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 fid;
@@ -970,7 +971,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		/* verify frequency is OK */
 		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
 			dprintk("invalid freq %u kHz, ignoring\n", freq);
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 
@@ -978,38 +979,17 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		 * BIOSs are using "off" to indicate invalid */
 		if (vid == VID_OFF) {
 			dprintk("invalid vid %u, ignoring\n", vid);
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 
-		/* verify only 1 entry from the lo frequency table */
-		if (fid < HI_FID_TABLE_BOTTOM) {
-			if (cntlofreq) {
-				/* if both entries are the same,
-				 * ignore this one ... */
-				if ((freq != powernow_table[cntlofreq].frequency) ||
-				    (index != powernow_table[cntlofreq].index)) {
-					printk(KERN_ERR PFX
-						"Too many lo freq table "
-						"entries\n");
-					return 1;
-				}
-
-				dprintk("double low frequency table entry, "
-						"ignoring it.\n");
-				invalidate_entry(data, i);
-				continue;
-			} else
-				cntlofreq = i;
-		}
-
 		if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
 			printk(KERN_INFO PFX "invalid freq entries "
 				"%u kHz vs. %u kHz\n", freq,
 				(unsigned int)
 				(data->acpi_data.states[i].core_frequency
 				 * 1000));
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 	}
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 80a722a071b5..40e1835b35e8 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -350,6 +350,12 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
 	}
 
+	if (c->cpuid_level > 6) {
+		unsigned ecx = cpuid_ecx(6);
+		if (ecx & 0x01)
+			set_cpu_cap(c, X86_FEATURE_APERFMPERF);
+	}
+
 	if (cpu_has_xmm2)
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
 	if (cpu_has_ds) {
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index 188a1ca5ad2b..4ac6d48fe11b 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,11 +1,8 @@
-obj-y				=  mce.o
+obj-y				=  mce.o mce-severity.o
 
-obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
-obj-$(CONFIG_X86_OLD_MCE)	+= k7.o p4.o p6.o
 obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
 obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
 obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd.o
-obj-$(CONFIG_X86_MCE_NONFATAL)	+= non-fatal.o
 obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
 obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
 
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
deleted file mode 100644
index b945d5dbc609..000000000000
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Athlon specific Machine Check Exception Reporting
- * (C) Copyright 2002 Dave Jones <davej@redhat.com>
- */
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-/* Machine Check Handler For AMD Athlon/Duron: */
-static void k7_machine_check(struct pt_regs *regs, long error_code)
-{
-	u32 alow, ahigh, high, low;
-	u32 mcgstl, mcgsth;
-	int recover = 1;
-	int i;
-
-	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover = 0;
-
-	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
-		smp_processor_id(), mcgsth, mcgstl);
-
-	for (i = 1; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high & (1<<31)) {
-			char misc[20];
-			char addr[24];
-
-			misc[0] = '\0';
-			addr[0] = '\0';
-
-			if (high & (1<<29))
-				recover |= 1;
-			if (high & (1<<25))
-				recover |= 2;
-			high &= ~(1<<31);
-
-			if (high & (1<<27)) {
-				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
-			}
-			if (high & (1<<26)) {
-				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
-			}
-
-			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
-				smp_processor_id(), i, high, low, misc, addr);
-
-			/* Clear it: */
-			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-			/* Serialize: */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-	}
-
-	if (recover & 2)
-		panic("CPU context corrupt");
-	if (recover & 1)
-		panic("Unable to continue");
-
-	printk(KERN_EMERG "Attempting to continue.\n");
-
-	mcgstl &= ~(1<<2);
-	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-}
-
-
-/* AMD K7 machine check is Intel like: */
-void amd_mcheck_init(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int i;
-
-	if (!cpu_has(c, X86_FEATURE_MCE))
-		return;
-
-	machine_check_vector = k7_machine_check;
-	/* Make sure the vector pointer is visible before we enable MCEs: */
-	wmb();
-
-	printk(KERN_INFO "Intel machine check architecture supported.\n");
-
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<8))	/* Control register present ? */
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-	nr_mce_banks = l & 0xff;
-
-	/*
-	 * Clear status for MC index 0 separately, we don't touch CTL,
-	 * as some K7 Athlons cause spurious MCEs when its enabled:
-	 */
-	if (boot_cpu_data.x86 == 6) {
-		wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
-		i = 1;
-	} else
-		i = 0;
-
-	for (; i < nr_mce_banks; i++) {
-		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-	}
-
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
-		smp_processor_id());
-}
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index a3a235a53f09..7029f0e2acad 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -18,7 +18,12 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
+#include <linux/notifier.h>
+#include <linux/kdebug.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
 #include <asm/mce.h>
+#include <asm/apic.h>
 
 /* Update fake mce registers on current CPU. */
 static void inject_mce(struct mce *m)
@@ -39,44 +44,141 @@ static void inject_mce(struct mce *m)
 	i->finished = 1;
 }
 
-struct delayed_mce {
-	struct timer_list timer;
-	struct mce m;
-};
+static void raise_poll(struct mce *m)
+{
+	unsigned long flags;
+	mce_banks_t b;
 
-/* Inject mce on current CPU */
-static void raise_mce(unsigned long data)
+	memset(&b, 0xff, sizeof(mce_banks_t));
+	local_irq_save(flags);
+	machine_check_poll(0, &b);
+	local_irq_restore(flags);
+	m->finished = 0;
+}
+
+static void raise_exception(struct mce *m, struct pt_regs *pregs)
 {
-	struct delayed_mce *dm = (struct delayed_mce *)data;
-	struct mce *m = &dm->m;
-	int cpu = m->extcpu;
+	struct pt_regs regs;
+	unsigned long flags;
 
-	inject_mce(m);
-	if (m->status & MCI_STATUS_UC) {
-		struct pt_regs regs;
+	if (!pregs) {
 		memset(&regs, 0, sizeof(struct pt_regs));
 		regs.ip = m->ip;
 		regs.cs = m->cs;
+		pregs = &regs;
+	}
+	/* in mcheck exeception handler, irq will be disabled */
+	local_irq_save(flags);
+	do_machine_check(pregs, 0);
+	local_irq_restore(flags);
+	m->finished = 0;
+}
+
+static cpumask_t mce_inject_cpumask;
+
+static int mce_raise_notify(struct notifier_block *self,
+			    unsigned long val, void *data)
+{
+	struct die_args *args = (struct die_args *)data;
+	int cpu = smp_processor_id();
+	struct mce *m = &__get_cpu_var(injectm);
+	if (val != DIE_NMI_IPI || !cpu_isset(cpu, mce_inject_cpumask))
+		return NOTIFY_DONE;
+	cpu_clear(cpu, mce_inject_cpumask);
+	if (m->inject_flags & MCJ_EXCEPTION)
+		raise_exception(m, args->regs);
+	else if (m->status)
+		raise_poll(m);
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block mce_raise_nb = {
+	.notifier_call = mce_raise_notify,
+	.priority = 1000,
+};
+
+/* Inject mce on current CPU */
+static int raise_local(struct mce *m)
+{
+	int context = MCJ_CTX(m->inject_flags);
+	int ret = 0;
+	int cpu = m->extcpu;
+
+	if (m->inject_flags & MCJ_EXCEPTION) {
 		printk(KERN_INFO "Triggering MCE exception on CPU %d\n", cpu);
-		do_machine_check(&regs, 0);
+		switch (context) {
+		case MCJ_CTX_IRQ:
+			/*
+			 * Could do more to fake interrupts like
+			 * calling irq_enter, but the necessary
+			 * machinery isn't exported currently.
+			 */
+			/*FALL THROUGH*/
+		case MCJ_CTX_PROCESS:
+			raise_exception(m, NULL);
+			break;
+		default:
+			printk(KERN_INFO "Invalid MCE context\n");
+			ret = -EINVAL;
+		}
 		printk(KERN_INFO "MCE exception done on CPU %d\n", cpu);
-	} else {
-		mce_banks_t b;
-		memset(&b, 0xff, sizeof(mce_banks_t));
+	} else if (m->status) {
 		printk(KERN_INFO "Starting machine check poll CPU %d\n", cpu);
-		machine_check_poll(0, &b);
+		raise_poll(m);
 		mce_notify_irq();
-		printk(KERN_INFO "Finished machine check poll on CPU %d\n",
-		       cpu);
-	}
-	kfree(dm);
+		printk(KERN_INFO "Machine check poll done on CPU %d\n", cpu);
+	} else
+		m->finished = 0;
+
+	return ret;
+}
+
+static void raise_mce(struct mce *m)
+{
+	int context = MCJ_CTX(m->inject_flags);
+
+	inject_mce(m);
+
+	if (context == MCJ_CTX_RANDOM)
+		return;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (m->inject_flags & MCJ_NMI_BROADCAST) {
+		unsigned long start;
+		int cpu;
+		get_online_cpus();
+		mce_inject_cpumask = cpu_online_map;
+		cpu_clear(get_cpu(), mce_inject_cpumask);
+		for_each_online_cpu(cpu) {
+			struct mce *mcpu = &per_cpu(injectm, cpu);
+			if (!mcpu->finished ||
+			    MCJ_CTX(mcpu->inject_flags) != MCJ_CTX_RANDOM)
+				cpu_clear(cpu, mce_inject_cpumask);
+		}
+		if (!cpus_empty(mce_inject_cpumask))
+			apic->send_IPI_mask(&mce_inject_cpumask, NMI_VECTOR);
+		start = jiffies;
+		while (!cpus_empty(mce_inject_cpumask)) {
+			if (!time_before(jiffies, start + 2*HZ)) {
+				printk(KERN_ERR
+				"Timeout waiting for mce inject NMI %lx\n",
+					*cpus_addr(mce_inject_cpumask));
+				break;
+			}
+			cpu_relax();
+		}
+		raise_local(m);
+		put_cpu();
+		put_online_cpus();
+	} else
+#endif
+		raise_local(m);
 }
 
 /* Error injection interface */
 static ssize_t mce_write(struct file *filp, const char __user *ubuf,
 			 size_t usize, loff_t *off)
 {
-	struct delayed_mce *dm;
 	struct mce m;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -96,19 +198,12 @@ static ssize_t mce_write(struct file *filp, const char __user *ubuf,
 	if (m.extcpu >= num_possible_cpus() || !cpu_online(m.extcpu))
 		return -EINVAL;
 
-	dm = kmalloc(sizeof(struct delayed_mce), GFP_KERNEL);
-	if (!dm)
-		return -ENOMEM;
-
 	/*
 	 * Need to give user space some time to set everything up,
 	 * so do it a jiffie or two later everywhere.
-	 * Should we use a hrtimer here for better synchronization?
 	 */
-	memcpy(&dm->m, &m, sizeof(struct mce));
-	setup_timer(&dm->timer, raise_mce, (unsigned long)dm);
-	dm->timer.expires = jiffies + 2;
-	add_timer_on(&dm->timer, m.extcpu);
+	schedule_timeout(2);
+	raise_mce(&m);
 	return usize;
 }
 
@@ -116,6 +211,7 @@ static int inject_init(void)
 {
 	printk(KERN_INFO "Machine check injector initialized\n");
 	mce_chrdev_ops.write = mce_write;
+	register_die_notifier(&mce_raise_nb);
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index 54dcb8ff12e5..32996f9fab67 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -1,3 +1,4 @@
+#include <linux/sysdev.h>
 #include <asm/mce.h>
 
 enum severity_level {
@@ -10,6 +11,20 @@ enum severity_level {
 	MCE_PANIC_SEVERITY,
 };
 
+#define ATTR_LEN		16
+
+/* One object for each MCE bank, shared by all CPUs */
+struct mce_bank {
+	u64			ctl;			/* subevents to enable */
+	unsigned char init;				/* initialise bank? */
+	struct sysdev_attribute attr;			/* sysdev attribute */
+	char			attrname[ATTR_LEN];	/* attribute name */
+};
+
 int mce_severity(struct mce *a, int tolerant, char **msg);
+struct dentry *mce_get_debugfs_dir(void);
 
 extern int mce_ser;
+
+extern struct mce_bank *mce_banks;
+
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index ff0807f97056..8a85dd1b1aa1 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -139,6 +139,7 @@ int mce_severity(struct mce *a, int tolerant, char **msg)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
 static void *s_start(struct seq_file *f, loff_t *pos)
 {
 	if (*pos >= ARRAY_SIZE(severities))
@@ -197,7 +198,7 @@ static int __init severities_debugfs_init(void)
 {
 	struct dentry *dmce = NULL, *fseverities_coverage = NULL;
 
-	dmce = debugfs_create_dir("mce", NULL);
+	dmce = mce_get_debugfs_dir();
 	if (dmce == NULL)
 		goto err_out;
 	fseverities_coverage = debugfs_create_file("severities-coverage",
@@ -209,10 +210,7 @@ static int __init severities_debugfs_init(void)
 	return 0;
 
 err_out:
-	if (fseverities_coverage)
-		debugfs_remove(fseverities_coverage);
-	if (dmce)
-		debugfs_remove(dmce);
 	return -ENOMEM;
 }
 late_initcall(severities_debugfs_init);
+#endif
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index fdd51b554355..2f5aab26320e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -34,6 +34,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
+#include <linux/debugfs.h>
 
 #include <asm/processor.h>
 #include <asm/hw_irq.h>
@@ -45,21 +46,8 @@
 
 #include "mce-internal.h"
 
-/* Handle unconfigured int18 (should never happen) */
-static void unexpected_machine_check(struct pt_regs *regs, long error_code)
-{
-	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
-	       smp_processor_id());
-}
-
-/* Call the installed machine check handler for this CPU setup. */
-void (*machine_check_vector)(struct pt_regs *, long error_code) =
-						unexpected_machine_check;
-
 int mce_disabled __read_mostly;
 
-#ifdef CONFIG_X86_NEW_MCE
-
 #define MISC_MCELOG_MINOR	227
 
 #define SPINUNIT 100	/* 100ns */
@@ -77,7 +65,6 @@ DEFINE_PER_CPU(unsigned, mce_exception_count);
  */
 static int			tolerant		__read_mostly = 1;
 static int			banks			__read_mostly;
-static u64			*bank			__read_mostly;
 static int			rip_msr			__read_mostly;
 static int			mce_bootlog		__read_mostly = -1;
 static int			monarch_timeout		__read_mostly = -1;
@@ -87,13 +74,13 @@ int				mce_cmci_disabled	__read_mostly;
 int				mce_ignore_ce		__read_mostly;
 int				mce_ser			__read_mostly;
 
+struct mce_bank                *mce_banks		__read_mostly;
+
 /* User mode helper program triggered by machine check event */
 static unsigned long		mce_need_notify;
 static char			mce_helper[128];
 static char			*mce_helper_argv[2] = { mce_helper, NULL };
 
-static unsigned long		dont_init_banks;
-
 static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
 static DEFINE_PER_CPU(struct mce, mces_seen);
 static int			cpu_missing;
@@ -104,11 +91,6 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
 	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
 };
 
-static inline int skip_bank_init(int i)
-{
-	return i < BITS_PER_LONG && test_bit(i, &dont_init_banks);
-}
-
 static DEFINE_PER_CPU(struct work_struct, mce_work);
 
 /* Do initial initialization of a struct mce */
@@ -232,6 +214,9 @@ static void print_mce_tail(void)
 
 static atomic_t mce_paniced;
 
+static int fake_panic;
+static atomic_t mce_fake_paniced;
+
 /* Panic in progress. Enable interrupts and wait for final IPI */
 static void wait_for_panic(void)
 {
@@ -249,15 +234,21 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 {
 	int i;
 
-	/*
-	 * Make sure only one CPU runs in machine check panic
-	 */
-	if (atomic_add_return(1, &mce_paniced) > 1)
-		wait_for_panic();
-	barrier();
+	if (!fake_panic) {
+		/*
+		 * Make sure only one CPU runs in machine check panic
+		 */
+		if (atomic_inc_return(&mce_paniced) > 1)
+			wait_for_panic();
+		barrier();
 
-	bust_spinlocks(1);
-	console_verbose();
+		bust_spinlocks(1);
+		console_verbose();
+	} else {
+		/* Don't log too much for fake panic */
+		if (atomic_inc_return(&mce_fake_paniced) > 1)
+			return;
+	}
 	print_mce_head();
 	/* First print corrected ones that are still unlogged */
 	for (i = 0; i < MCE_LOG_LEN; i++) {
@@ -284,9 +275,12 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 	print_mce_tail();
 	if (exp)
 		printk(KERN_EMERG "Machine check: %s\n", exp);
-	if (panic_timeout == 0)
-		panic_timeout = mce_panic_timeout;
-	panic(msg);
+	if (!fake_panic) {
+		if (panic_timeout == 0)
+			panic_timeout = mce_panic_timeout;
+		panic(msg);
+	} else
+		printk(KERN_EMERG "Fake kernel panic: %s\n", msg);
 }
 
 /* Support code for software error injection */
@@ -296,11 +290,11 @@ static int msr_to_offset(u32 msr)
 	unsigned bank = __get_cpu_var(injectm.bank);
 	if (msr == rip_msr)
 		return offsetof(struct mce, ip);
-	if (msr == MSR_IA32_MC0_STATUS + bank*4)
+	if (msr == MSR_IA32_MCx_STATUS(bank))
 		return offsetof(struct mce, status);
-	if (msr == MSR_IA32_MC0_ADDR + bank*4)
+	if (msr == MSR_IA32_MCx_ADDR(bank))
 		return offsetof(struct mce, addr);
-	if (msr == MSR_IA32_MC0_MISC + bank*4)
+	if (msr == MSR_IA32_MCx_MISC(bank))
 		return offsetof(struct mce, misc);
 	if (msr == MSR_IA32_MCG_STATUS)
 		return offsetof(struct mce, mcgstatus);
@@ -505,7 +499,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 
 	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
 	for (i = 0; i < banks; i++) {
-		if (!bank[i] || !test_bit(i, *b))
+		if (!mce_banks[i].ctl || !test_bit(i, *b))
 			continue;
 
 		m.misc = 0;
@@ -514,7 +508,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		m.tsc = 0;
 
 		barrier();
-		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		m.status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
 		if (!(m.status & MCI_STATUS_VAL))
 			continue;
 
@@ -529,9 +523,9 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 			continue;
 
 		if (m.status & MCI_STATUS_MISCV)
-			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+			m.misc = mce_rdmsrl(MSR_IA32_MCx_MISC(i));
 		if (m.status & MCI_STATUS_ADDRV)
-			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+			m.addr = mce_rdmsrl(MSR_IA32_MCx_ADDR(i));
 
 		if (!(flags & MCP_TIMESTAMP))
 			m.tsc = 0;
@@ -547,7 +541,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		/*
 		 * Clear state for this bank.
 		 */
-		mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+		mce_wrmsrl(MSR_IA32_MCx_STATUS(i), 0);
 	}
 
 	/*
@@ -568,7 +562,7 @@ static int mce_no_way_out(struct mce *m, char **msg)
 	int i;
 
 	for (i = 0; i < banks; i++) {
-		m->status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
 		if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
 			return 1;
 	}
@@ -628,7 +622,7 @@ out:
  * This way we prevent any potential data corruption in a unrecoverable case
  * and also makes sure always all CPU's errors are examined.
  *
- * Also this detects the case of an machine check event coming from outer
+ * Also this detects the case of a machine check event coming from outer
  * space (not detected by any CPUs) In this case some external agent wants
  * us to shut down, so panic too.
  *
@@ -681,7 +675,7 @@ static void mce_reign(void)
 	 * No machine check event found. Must be some external
 	 * source or one CPU is hung. Panic.
 	 */
-	if (!m && tolerant < 3)
+	if (global_worst <= MCE_KEEP_SEVERITY && tolerant < 3)
 		mce_panic("Machine check from unknown source", NULL, NULL);
 
 	/*
@@ -715,7 +709,7 @@ static int mce_start(int *no_way_out)
 	 * global_nwo should be updated before mce_callin
 	 */
 	smp_wmb();
-	order = atomic_add_return(1, &mce_callin);
+	order = atomic_inc_return(&mce_callin);
 
 	/*
 	 * Wait for everyone.
@@ -852,7 +846,7 @@ static void mce_clear_state(unsigned long *toclear)
 
 	for (i = 0; i < banks; i++) {
 		if (test_bit(i, toclear))
-			mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+			mce_wrmsrl(MSR_IA32_MCx_STATUS(i), 0);
 	}
 }
 
@@ -905,11 +899,11 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	mce_setup(&m);
 
 	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
-	no_way_out = mce_no_way_out(&m, &msg);
-
 	final = &__get_cpu_var(mces_seen);
 	*final = m;
 
+	no_way_out = mce_no_way_out(&m, &msg);
+
 	barrier();
 
 	/*
@@ -926,14 +920,14 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	order = mce_start(&no_way_out);
 	for (i = 0; i < banks; i++) {
 		__clear_bit(i, toclear);
-		if (!bank[i])
+		if (!mce_banks[i].ctl)
 			continue;
 
 		m.misc = 0;
 		m.addr = 0;
 		m.bank = i;
 
-		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		m.status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
 		if ((m.status & MCI_STATUS_VAL) == 0)
 			continue;
 
@@ -974,9 +968,9 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 			kill_it = 1;
 
 		if (m.status & MCI_STATUS_MISCV)
-			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+			m.misc = mce_rdmsrl(MSR_IA32_MCx_MISC(i));
 		if (m.status & MCI_STATUS_ADDRV)
-			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+			m.addr = mce_rdmsrl(MSR_IA32_MCx_ADDR(i));
 
 		/*
 		 * Action optional error. Queue address for later processing.
@@ -1169,10 +1163,25 @@ int mce_notify_irq(void)
 }
 EXPORT_SYMBOL_GPL(mce_notify_irq);
 
+static int mce_banks_init(void)
+{
+	int i;
+
+	mce_banks = kzalloc(banks * sizeof(struct mce_bank), GFP_KERNEL);
+	if (!mce_banks)
+		return -ENOMEM;
+	for (i = 0; i < banks; i++) {
+		struct mce_bank *b = &mce_banks[i];
+		b->ctl = -1ULL;
+		b->init = 1;
+	}
+	return 0;
+}
+
 /*
  * Initialize Machine Checks for a CPU.
  */
-static int mce_cap_init(void)
+static int __cpuinit mce_cap_init(void)
 {
 	unsigned b;
 	u64 cap;
@@ -1192,11 +1201,10 @@ static int mce_cap_init(void)
 	/* Don't support asymmetric configurations today */
 	WARN_ON(banks != 0 && b != banks);
 	banks = b;
-	if (!bank) {
-		bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
-		if (!bank)
-			return -ENOMEM;
-		memset(bank, 0xff, banks * sizeof(u64));
+	if (!mce_banks) {
+		int err = mce_banks_init();
+		if (err)
+			return err;
 	}
 
 	/* Use accurate RIP reporting if available. */
@@ -1228,15 +1236,16 @@ static void mce_init(void)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 
 	for (i = 0; i < banks; i++) {
-		if (skip_bank_init(i))
+		struct mce_bank *b = &mce_banks[i];
+		if (!b->init)
 			continue;
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+		wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
+		wrmsrl(MSR_IA32_MCx_STATUS(i), 0);
 	}
 }
 
 /* Add per CPU specific workarounds here */
-static int mce_cpu_quirks(struct cpuinfo_x86 *c)
+static int __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
 {
 	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
 		pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
@@ -1251,7 +1260,7 @@ static int mce_cpu_quirks(struct cpuinfo_x86 *c)
 			 * trips off incorrectly with the IOMMU & 3ware
 			 * & Cerberus:
 			 */
-			clear_bit(10, (unsigned long *)&bank[4]);
+			clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
 		}
 		if (c->x86 <= 17 && mce_bootlog < 0) {
 			/*
@@ -1265,7 +1274,7 @@ static int mce_cpu_quirks(struct cpuinfo_x86 *c)
 		 * by default.
 		 */
 		 if (c->x86 == 6 && banks > 0)
-			bank[0] = 0;
+			mce_banks[0].ctl = 0;
 	}
 
 	if (c->x86_vendor == X86_VENDOR_INTEL) {
@@ -1278,8 +1287,8 @@ static int mce_cpu_quirks(struct cpuinfo_x86 *c)
 		 * valid event later, merely don't write CTL0.
 		 */
 
-		if (c->x86 == 6 && c->x86_model < 0x1A)
-			__set_bit(0, &dont_init_banks);
+		if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0)
+			mce_banks[0].init = 0;
 
 		/*
 		 * All newer Intel systems support MCE broadcasting. Enable
@@ -1348,6 +1357,17 @@ static void mce_init_timer(void)
 	add_timer_on(t, smp_processor_id());
 }
 
+/* Handle unconfigured int18 (should never happen) */
+static void unexpected_machine_check(struct pt_regs *regs, long error_code)
+{
+	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
+	       smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void (*machine_check_vector)(struct pt_regs *, long error_code) =
+						unexpected_machine_check;
+
 /*
  * Called for each booted CPU to set up machine checks.
  * Must be called with preempt off:
@@ -1561,8 +1581,10 @@ static struct miscdevice mce_log_device = {
  */
 static int __init mcheck_enable(char *str)
 {
-	if (*str == 0)
+	if (*str == 0) {
 		enable_p5_mce();
+		return 1;
+	}
 	if (*str == '=')
 		str++;
 	if (!strcmp(str, "off"))
@@ -1603,8 +1625,9 @@ static int mce_disable(void)
 	int i;
 
 	for (i = 0; i < banks; i++) {
-		if (!skip_bank_init(i))
-			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+		struct mce_bank *b = &mce_banks[i];
+		if (b->init)
+			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
 	return 0;
 }
@@ -1679,14 +1702,15 @@ DEFINE_PER_CPU(struct sys_device, mce_dev);
 __cpuinitdata
 void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
-static struct sysdev_attribute *bank_attrs;
+static inline struct mce_bank *attr_to_bank(struct sysdev_attribute *attr)
+{
+	return container_of(attr, struct mce_bank, attr);
+}
 
 static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
 			 char *buf)
 {
-	u64 b = bank[attr - bank_attrs];
-
-	return sprintf(buf, "%llx\n", b);
+	return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl);
 }
 
 static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
@@ -1697,7 +1721,7 @@ static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
 	if (strict_strtoull(buf, 0, &new) < 0)
 		return -EINVAL;
 
-	bank[attr - bank_attrs] = new;
+	attr_to_bank(attr)->ctl = new;
 	mce_restart();
 
 	return size;
@@ -1839,7 +1863,7 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 	}
 	for (j = 0; j < banks; j++) {
 		err = sysdev_create_file(&per_cpu(mce_dev, cpu),
-					&bank_attrs[j]);
+					&mce_banks[j].attr);
 		if (err)
 			goto error2;
 	}
@@ -1848,10 +1872,10 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 	return 0;
 error2:
 	while (--j >= 0)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[j]);
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[j].attr);
 error:
 	while (--i >= 0)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[i].attr);
 
 	sysdev_unregister(&per_cpu(mce_dev, cpu));
 
@@ -1869,7 +1893,7 @@ static __cpuinit void mce_remove_device(unsigned int cpu)
 		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
 
 	for (i = 0; i < banks; i++)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[i].attr);
 
 	sysdev_unregister(&per_cpu(mce_dev, cpu));
 	cpumask_clear_cpu(cpu, mce_dev_initialized);
@@ -1886,8 +1910,9 @@ static void mce_disable_cpu(void *h)
 	if (!(action & CPU_TASKS_FROZEN))
 		cmci_clear();
 	for (i = 0; i < banks; i++) {
-		if (!skip_bank_init(i))
-			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+		struct mce_bank *b = &mce_banks[i];
+		if (b->init)
+			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
 }
 
@@ -1902,8 +1927,9 @@ static void mce_reenable_cpu(void *h)
 	if (!(action & CPU_TASKS_FROZEN))
 		cmci_reenable();
 	for (i = 0; i < banks; i++) {
-		if (!skip_bank_init(i))
-			wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
+		struct mce_bank *b = &mce_banks[i];
+		if (b->init)
+			wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
 	}
 }
 
@@ -1951,35 +1977,21 @@ static struct notifier_block mce_cpu_notifier __cpuinitdata = {
 	.notifier_call = mce_cpu_callback,
 };
 
-static __init int mce_init_banks(void)
+static __init void mce_init_banks(void)
 {
 	int i;
 
-	bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
-				GFP_KERNEL);
-	if (!bank_attrs)
-		return -ENOMEM;
-
 	for (i = 0; i < banks; i++) {
-		struct sysdev_attribute *a = &bank_attrs[i];
+		struct mce_bank *b = &mce_banks[i];
+		struct sysdev_attribute *a = &b->attr;
 
-		a->attr.name	= kasprintf(GFP_KERNEL, "bank%d", i);
-		if (!a->attr.name)
-			goto nomem;
+		a->attr.name	= b->attrname;
+		snprintf(b->attrname, ATTR_LEN, "bank%d", i);
 
 		a->attr.mode	= 0644;
 		a->show		= show_bank;
 		a->store	= set_bank;
 	}
-	return 0;
-
-nomem:
-	while (--i >= 0)
-		kfree(bank_attrs[i].attr.name);
-	kfree(bank_attrs);
-	bank_attrs = NULL;
-
-	return -ENOMEM;
 }
 
 static __init int mce_init_device(void)
@@ -1992,9 +2004,7 @@ static __init int mce_init_device(void)
 
 	zalloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL);
 
-	err = mce_init_banks();
-	if (err)
-		return err;
+	mce_init_banks();
 
 	err = sysdev_class_register(&mce_sysclass);
 	if (err)
@@ -2014,57 +2024,65 @@ static __init int mce_init_device(void)
 
 device_initcall(mce_init_device);
 
-#else /* CONFIG_X86_OLD_MCE: */
-
-int nr_mce_banks;
-EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
+/*
+ * Old style boot options parsing. Only for compatibility.
+ */
+static int __init mcheck_disable(char *str)
+{
+	mce_disabled = 1;
+	return 1;
+}
+__setup("nomce", mcheck_disable);
 
-/* This has to be run for each processor */
-void mcheck_init(struct cpuinfo_x86 *c)
+#ifdef CONFIG_DEBUG_FS
+struct dentry *mce_get_debugfs_dir(void)
 {
-	if (mce_disabled)
-		return;
+	static struct dentry *dmce;
 
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		amd_mcheck_init(c);
-		break;
+	if (!dmce)
+		dmce = debugfs_create_dir("mce", NULL);
 
-	case X86_VENDOR_INTEL:
-		if (c->x86 == 5)
-			intel_p5_mcheck_init(c);
-		if (c->x86 == 6)
-			intel_p6_mcheck_init(c);
-		if (c->x86 == 15)
-			intel_p4_mcheck_init(c);
-		break;
+	return dmce;
+}
 
-	case X86_VENDOR_CENTAUR:
-		if (c->x86 == 5)
-			winchip_mcheck_init(c);
-		break;
+static void mce_reset(void)
+{
+	cpu_missing = 0;
+	atomic_set(&mce_fake_paniced, 0);
+	atomic_set(&mce_executing, 0);
+	atomic_set(&mce_callin, 0);
+	atomic_set(&global_nwo, 0);
+}
 
-	default:
-		break;
-	}
-	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks);
+static int fake_panic_get(void *data, u64 *val)
+{
+	*val = fake_panic;
+	return 0;
 }
 
-static int __init mcheck_enable(char *str)
+static int fake_panic_set(void *data, u64 val)
 {
-	mce_p5_enabled = 1;
-	return 1;
+	mce_reset();
+	fake_panic = val;
+	return 0;
 }
-__setup("mce", mcheck_enable);
 
-#endif /* CONFIG_X86_OLD_MCE */
+DEFINE_SIMPLE_ATTRIBUTE(fake_panic_fops, fake_panic_get,
+			fake_panic_set, "%llu\n");
 
-/*
- * Old style boot options parsing. Only for compatibility.
- */
-static int __init mcheck_disable(char *str)
+static int __init mce_debugfs_init(void)
 {
-	mce_disabled = 1;
-	return 1;
+	struct dentry *dmce, *ffake_panic;
+
+	dmce = mce_get_debugfs_dir();
+	if (!dmce)
+		return -ENOMEM;
+	ffake_panic = debugfs_create_file("fake_panic", 0444, dmce, NULL,
+					  &fake_panic_fops);
+	if (!ffake_panic)
+		return -ENOMEM;
+
+	return 0;
 }
-__setup("nomce", mcheck_disable);
+late_initcall(mce_debugfs_init);
+#endif
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index e1acec0f7a32..889f665fe93d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -90,7 +90,7 @@ static void cmci_discover(int banks, int boot)
 		if (test_bit(i, owned))
 			continue;
 
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Already owned by someone else? */
 		if (val & CMCI_EN) {
@@ -101,8 +101,8 @@ static void cmci_discover(int banks, int boot)
 		}
 
 		val |= CMCI_EN | CMCI_THRESHOLD;
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
+		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Did the enable bit stick? -- the bank supports CMCI */
 		if (val & CMCI_EN) {
@@ -152,9 +152,9 @@ void cmci_clear(void)
 		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
 			continue;
 		/* Disable CMCI */
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 		val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK);
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
 		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
 	spin_unlock_irqrestore(&cmci_discover_lock, flags);
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
deleted file mode 100644
index f5f2d6f71fb6..000000000000
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Non Fatal Machine Check Exception Reporting
- *
- * (C) Copyright 2002 Dave Jones. <davej@redhat.com>
- *
- * This file contains routines to check for non-fatal MCEs every 15s
- *
- */
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-static int		firstbank;
-
-#define MCE_RATE	(15*HZ)	/* timer rate is 15s */
-
-static void mce_checkregs(void *info)
-{
-	u32 low, high;
-	int i;
-
-	for (i = firstbank; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-
-		if (!(high & (1<<31)))
-			continue;
-
-		printk(KERN_INFO "MCE: The hardware reports a non fatal, "
-			"correctable incident occurred on CPU %d.\n",
-				smp_processor_id());
-
-		printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
-
-		/*
-		 * Scrub the error so we don't pick it up in MCE_RATE
-		 * seconds time:
-		 */
-		wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-
-		/* Serialize: */
-		wmb();
-		add_taint(TAINT_MACHINE_CHECK);
-	}
-}
-
-static void mce_work_fn(struct work_struct *work);
-static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
-
-static void mce_work_fn(struct work_struct *work)
-{
-	on_each_cpu(mce_checkregs, NULL, 1);
-	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
-}
-
-static int __init init_nonfatal_mce_checker(void)
-{
-	struct cpuinfo_x86 *c = &boot_cpu_data;
-
-	/* Check for MCE support */
-	if (!cpu_has(c, X86_FEATURE_MCE))
-		return -ENODEV;
-
-	/* Check for PPro style MCA */
-	if (!cpu_has(c, X86_FEATURE_MCA))
-		return -ENODEV;
-
-	/* Some Athlons misbehave when we frob bank 0 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-						boot_cpu_data.x86 == 6)
-		firstbank = 1;
-	else
-		firstbank = 0;
-
-	/*
-	 * Check for non-fatal errors every MCE_RATE s
-	 */
-	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
-	printk(KERN_INFO "Machine check exception polling timer started.\n");
-
-	return 0;
-}
-module_init(init_nonfatal_mce_checker);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
deleted file mode 100644
index 4482aea9aa2e..000000000000
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * P4 specific Machine Check Exception Reporting
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-/* as supported by the P4/Xeon family */
-struct intel_mce_extended_msrs {
-	u32 eax;
-	u32 ebx;
-	u32 ecx;
-	u32 edx;
-	u32 esi;
-	u32 edi;
-	u32 ebp;
-	u32 esp;
-	u32 eflags;
-	u32 eip;
-	/* u32 *reserved[]; */
-};
-
-static int mce_num_extended_msrs;
-
-/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
-static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
-{
-	u32 h;
-
-	rdmsr(MSR_IA32_MCG_EAX, r->eax, h);
-	rdmsr(MSR_IA32_MCG_EBX, r->ebx, h);
-	rdmsr(MSR_IA32_MCG_ECX, r->ecx, h);
-	rdmsr(MSR_IA32_MCG_EDX, r->edx, h);
-	rdmsr(MSR_IA32_MCG_ESI, r->esi, h);
-	rdmsr(MSR_IA32_MCG_EDI, r->edi, h);
-	rdmsr(MSR_IA32_MCG_EBP, r->ebp, h);
-	rdmsr(MSR_IA32_MCG_ESP, r->esp, h);
-	rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h);
-	rdmsr(MSR_IA32_MCG_EIP, r->eip, h);
-}
-
-static void intel_machine_check(struct pt_regs *regs, long error_code)
-{
-	u32 alow, ahigh, high, low;
-	u32 mcgstl, mcgsth;
-	int recover = 1;
-	int i;
-
-	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover = 0;
-
-	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
-		smp_processor_id(), mcgsth, mcgstl);
-
-	if (mce_num_extended_msrs > 0) {
-		struct intel_mce_extended_msrs dbg;
-
-		intel_get_extended_msrs(&dbg);
-
-		printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"
-			"\teax: %08x ebx: %08x ecx: %08x edx: %08x\n"
-			"\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
-			smp_processor_id(), dbg.eip, dbg.eflags,
-			dbg.eax, dbg.ebx, dbg.ecx, dbg.edx,
-			dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
-	}
-
-	for (i = 0; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high & (1<<31)) {
-			char misc[20];
-			char addr[24];
-
-			misc[0] = addr[0] = '\0';
-			if (high & (1<<29))
-				recover |= 1;
-			if (high & (1<<25))
-				recover |= 2;
-			high &= ~(1<<31);
-			if (high & (1<<27)) {
-				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
-			}
-			if (high & (1<<26)) {
-				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
-			}
-			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
-				smp_processor_id(), i, high, low, misc, addr);
-		}
-	}
-
-	if (recover & 2)
-		panic("CPU context corrupt");
-	if (recover & 1)
-		panic("Unable to continue");
-
-	printk(KERN_EMERG "Attempting to continue.\n");
-
-	/*
-	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
-	 * recoverable/continuable.This will allow BIOS to look at the MSRs
-	 * for errors if the OS could not log the error.
-	 */
-	for (i = 0; i < nr_mce_banks; i++) {
-		u32 msr;
-		msr = MSR_IA32_MC0_STATUS+i*4;
-		rdmsr(msr, low, high);
-		if (high&(1<<31)) {
-			/* Clear it */
-			wrmsr(msr, 0UL, 0UL);
-			/* Serialize */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-	}
-	mcgstl &= ~(1<<2);
-	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-}
-
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int i;
-
-	machine_check_vector = intel_machine_check;
-	wmb();
-
-	printk(KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<8))	/* Control register present ? */
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-	nr_mce_banks = l & 0xff;
-
-	for (i = 0; i < nr_mce_banks; i++) {
-		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-	}
-
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
-		smp_processor_id());
-
-	/* Check for P4/Xeon extended MCE MSRs */
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<9))	{/* MCG_EXT_P */
-		mce_num_extended_msrs = (l >> 16) & 0xff;
-		printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
-				" available\n",
-			smp_processor_id(), mce_num_extended_msrs);
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-		/* Check for P4/Xeon Thermal monitor */
-		intel_init_thermal(c);
-#endif
-	}
-}
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
deleted file mode 100644
index 01e4f8178183..000000000000
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * P6 specific Machine Check Exception Reporting
- * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
- */
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-/* Machine Check Handler For PII/PIII */
-static void intel_machine_check(struct pt_regs *regs, long error_code)
-{
-	u32 alow, ahigh, high, low;
-	u32 mcgstl, mcgsth;
-	int recover = 1;
-	int i;
-
-	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover = 0;
-
-	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
-		smp_processor_id(), mcgsth, mcgstl);
-
-	for (i = 0; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high & (1<<31)) {
-			char misc[20];
-			char addr[24];
-
-			misc[0] = '\0';
-			addr[0] = '\0';
-
-			if (high & (1<<29))
-				recover |= 1;
-			if (high & (1<<25))
-				recover |= 2;
-			high &= ~(1<<31);
-
-			if (high & (1<<27)) {
-				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
-			}
-			if (high & (1<<26)) {
-				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
-			}
-
-			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
-				smp_processor_id(), i, high, low, misc, addr);
-		}
-	}
-
-	if (recover & 2)
-		panic("CPU context corrupt");
-	if (recover & 1)
-		panic("Unable to continue");
-
-	printk(KERN_EMERG "Attempting to continue.\n");
-	/*
-	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
-	 * recoverable/continuable.This will allow BIOS to look at the MSRs
-	 * for errors if the OS could not log the error:
-	 */
-	for (i = 0; i < nr_mce_banks; i++) {
-		unsigned int msr;
-
-		msr = MSR_IA32_MC0_STATUS+i*4;
-		rdmsr(msr, low, high);
-		if (high & (1<<31)) {
-			/* Clear it: */
-			wrmsr(msr, 0UL, 0UL);
-			/* Serialize: */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-	}
-	mcgstl &= ~(1<<2);
-	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-}
-
-/* Set up machine check reporting for processors with Intel style MCE: */
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int i;
-
-	/* Check for MCE support */
-	if (!cpu_has(c, X86_FEATURE_MCE))
-		return;
-
-	/* Check for PPro style MCA */
-	if (!cpu_has(c, X86_FEATURE_MCA))
-		return;
-
-	/* Ok machine check is available */
-	machine_check_vector = intel_machine_check;
-	/* Make sure the vector pointer is visible before we enable MCEs: */
-	wmb();
-
-	printk(KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<8))	/* Control register present ? */
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-	nr_mce_banks = l & 0xff;
-
-	/*
-	 * Following the example in IA-32 SDM Vol 3:
-	 * - MC0_CTL should not be written
-	 * - Status registers on all banks should be cleared on reset
-	 */
-	for (i = 1; i < nr_mce_banks; i++)
-		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-
-	for (i = 0; i < nr_mce_banks; i++)
-		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
-		smp_processor_id());
-}
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 5957a93e5173..63a56d147e4a 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -260,9 +260,6 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 		return;
 	}
 
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
-		tm2 = 1;
-
 	/* Check whether a vector already exists */
 	if (h & APIC_VECTOR_MASK) {
 		printk(KERN_DEBUG
@@ -271,6 +268,16 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 		return;
 	}
 
+	/* early Pentium M models use different method for enabling TM2 */
+	if (cpu_has(c, X86_FEATURE_TM2)) {
+		if (c->x86 == 6 && (c->x86_model == 9 || c->x86_model == 13)) {
+			rdmsr(MSR_THERM2_CTL, l, h);
+			if (l & MSR_THERM2_CTL_TM_SELECT)
+				tm2 = 1;
+		} else if (l & MSR_IA32_MISC_ENABLE_TM2)
+			tm2 = 1;
+	}
+
 	/* We'll mask the thermal vector in the lapic till we're ready: */
 	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
 	apic_write(APIC_LVTTHMR, h);
diff --git a/arch/x86/kernel/cpu/sched.c b/arch/x86/kernel/cpu/sched.c
new file mode 100644
index 000000000000..a640ae5ad201
--- /dev/null
+++ b/arch/x86/kernel/cpu/sched.c
@@ -0,0 +1,55 @@
+#include <linux/sched.h>
+#include <linux/math64.h>
+#include <linux/percpu.h>
+#include <linux/irqflags.h>
+
+#include <asm/cpufeature.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_SMP
+
+static DEFINE_PER_CPU(struct aperfmperf, old_perf_sched);
+
+static unsigned long scale_aperfmperf(void)
+{
+	struct aperfmperf val, *old = &__get_cpu_var(old_perf_sched);
+	unsigned long ratio, flags;
+
+	local_irq_save(flags);
+	get_aperfmperf(&val);
+	local_irq_restore(flags);
+
+	ratio = calc_aperfmperf_ratio(old, &val);
+	*old = val;
+
+	return ratio;
+}
+
+unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu)
+{
+	/*
+	 * do aperf/mperf on the cpu level because it includes things
+	 * like turbo mode, which are relevant to full cores.
+	 */
+	if (boot_cpu_has(X86_FEATURE_APERFMPERF))
+		return scale_aperfmperf();
+
+	/*
+	 * maybe have something cpufreq here
+	 */
+
+	return default_scale_freq_power(sd, cpu);
+}
+
+unsigned long arch_scale_smt_power(struct sched_domain *sd, int cpu)
+{
+	/*
+	 * aperf/mperf already includes the smt gain
+	 */
+	if (boot_cpu_has(X86_FEATURE_APERFMPERF))
+		return SCHED_LOAD_SCALE;
+
+	return default_scale_smt_power(sd, cpu);
+}
+
+#endif
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index c251be745107..d59fe323807e 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -146,7 +146,7 @@ ENTRY(ftrace_graph_caller)
 END(ftrace_graph_caller)
 
 GLOBAL(return_to_handler)
-	subq  $80, %rsp
+	subq  $24, %rsp
 
 	/* Save the return values */
 	movq %rax, (%rsp)
@@ -155,10 +155,10 @@ GLOBAL(return_to_handler)
 
 	call ftrace_return_to_handler
 
-	movq %rax, 72(%rsp)
+	movq %rax, 16(%rsp)
 	movq 8(%rsp), %rdx
 	movq (%rsp), %rax
-	addq $72, %rsp
+	addq $16, %rsp
 	retq
 #endif
 
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 5cf36c053ac4..23c167925a5c 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -19,12 +19,6 @@
 DEFINE_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
-#ifdef CONFIG_X86_32
-static void pit_disable_clocksource(void);
-#else
-static inline void pit_disable_clocksource(void) { }
-#endif
-
 /*
  * HPET replaces the PIT, when enabled. So we need to know, which of
  * the two timers is used
@@ -57,12 +51,10 @@ static void init_pit_timer(enum clock_event_mode mode,
 			outb_pit(0, PIT_CH0);
 			outb_pit(0, PIT_CH0);
 		}
-		pit_disable_clocksource();
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* One shot setup */
-		pit_disable_clocksource();
 		outb_pit(0x38, PIT_MODE);
 		break;
 
@@ -200,17 +192,6 @@ static struct clocksource pit_cs = {
 	.shift		= 20,
 };
 
-static void pit_disable_clocksource(void)
-{
-	/*
-	 * Use mult to check whether it is registered or not
-	 */
-	if (pit_cs.mult) {
-		clocksource_unregister(&pit_cs);
-		pit_cs.mult = 0;
-	}
-}
-
 static int __init init_pit_clocksource(void)
 {
 	 /*
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index b0cdde6932f5..74656d1d4e30 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -104,7 +104,7 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 	seq_printf(p, "  Threshold APIC interrupts\n");
 # endif
 #endif
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 	seq_printf(p, "%*s: ", prec, "MCE");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", per_cpu(mce_exception_count, j));
@@ -200,7 +200,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 	sum += irq_stats(cpu)->irq_threshold_count;
 # endif
 #endif
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 	sum += per_cpu(mce_exception_count, cpu);
 	sum += per_cpu(mce_poll_count, cpu);
 #endif
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 92b7703d3d58..ccf8ab54f31a 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -190,7 +190,7 @@ static void __init apic_intr_init(void)
 #ifdef CONFIG_X86_MCE_THRESHOLD
 	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 #endif
-#if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
+#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_LOCAL_APIC)
 	alloc_intr_gate(MCE_SELF_VECTOR, mce_self_interrupt);
 #endif
 
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 5d465b207e72..bf67dcb4a44c 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -178,7 +178,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 }
 
 /* not static: needed by APM */
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned long retval, flags;
 
@@ -186,7 +186,8 @@ unsigned long read_persistent_clock(void)
 	retval = get_wallclock();
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	return retval;
+	ts->tv_sec = retval;
+	ts->tv_nsec = 0;
 }
 
 int update_persistent_clock(struct timespec now)
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 81e58238c4ce..6a44a76055ad 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -856,7 +856,7 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
 		mce_notify_process();
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 71f4368b357e..fc3672a303d6 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -744,10 +744,16 @@ static cycle_t __vsyscall_fn vread_tsc(void)
 }
 #endif
 
+static void resume_tsc(void)
+{
+	clocksource_tsc.cycle_last = 0;
+}
+
 static struct clocksource clocksource_tsc = {
 	.name                   = "tsc",
 	.rating                 = 300,
 	.read                   = read_tsc,
+	.resume			= resume_tsc,
 	.mask                   = CLOCKSOURCE_MASK(64),
 	.shift                  = 22,
 	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS |
@@ -761,12 +767,14 @@ void mark_tsc_unstable(char *reason)
 {
 	if (!tsc_unstable) {
 		tsc_unstable = 1;
-		printk("Marking TSC unstable due to %s\n", reason);
+		printk(KERN_INFO "Marking TSC unstable due to %s\n", reason);
 		/* Change only the rating, when not registered */
 		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
+			clocksource_mark_unstable(&clocksource_tsc);
+		else {
+			clocksource_tsc.flags |= CLOCK_SOURCE_UNSTABLE;
 			clocksource_tsc.rating = 0;
+		}
 	}
 }
 
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 25ee06a80aad..cf53a78e2dcf 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -87,6 +87,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
 	vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
 	vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
 	vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
+	vsyscall_gtod_data.wall_time_coarse = __current_kernel_time();
 	write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
 }
 
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 165829600566..c8191defc38a 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -29,13 +29,26 @@
 #include <linux/random.h>
 #include <linux/limits.h>
 #include <linux/sched.h>
+#include <asm/elf.h>
+
+static unsigned int stack_maxrandom_size(void)
+{
+	unsigned int max = 0;
+	if ((current->flags & PF_RANDOMIZE) &&
+		!(current->personality & ADDR_NO_RANDOMIZE)) {
+		max = ((-1U) & STACK_RND_MASK) << PAGE_SHIFT;
+	}
+
+	return max;
+}
+
 
 /*
  * Top of mmap area (just below the process stack).
  *
- * Leave an at least ~128 MB hole.
+ * Leave an at least ~128 MB hole with possible stack randomization.
  */
-#define MIN_GAP (128*1024*1024)
+#define MIN_GAP (128*1024*1024UL + stack_maxrandom_size())
 #define MAX_GAP (TASK_SIZE/6*5)
 
 /*
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index d7ebc3a10f2f..7257cf3decf9 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -424,17 +424,9 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
-	entry = memtype_rb_search(&memtype_rbroot, new->start);
-	if (likely(entry != NULL)) {
-		/* To work correctly with list_for_each_entry_continue */
-		entry = list_entry(entry->nd.prev, struct memtype, nd);
-	} else {
-		entry = list_entry(&memtype_list, struct memtype, nd);
-	}
-
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
-	list_for_each_entry_continue(entry, &memtype_list, nd) {
+	list_for_each_entry(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
 			break;
@@ -532,7 +524,7 @@ int free_memtype(u64 start, u64 end)
 	 * in sorted start address
 	 */
 	saved_entry = entry;
-	list_for_each_entry(entry, &memtype_list, nd) {
+	list_for_each_entry_from(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
 			rb_erase(&entry->rb, &memtype_rbroot);
 			list_del(&entry->nd);
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 6a40b78b46aa..ee55754cc3c5 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -86,14 +86,47 @@ notrace static noinline int do_monotonic(struct timespec *ts)
 	return 0;
 }
 
+notrace static noinline int do_realtime_coarse(struct timespec *ts)
+{
+	unsigned long seq;
+	do {
+		seq = read_seqbegin(&gtod->lock);
+		ts->tv_sec = gtod->wall_time_coarse.tv_sec;
+		ts->tv_nsec = gtod->wall_time_coarse.tv_nsec;
+	} while (unlikely(read_seqretry(&gtod->lock, seq)));
+	return 0;
+}
+
+notrace static noinline int do_monotonic_coarse(struct timespec *ts)
+{
+	unsigned long seq, ns, secs;
+	do {
+		seq = read_seqbegin(&gtod->lock);
+		secs = gtod->wall_time_coarse.tv_sec;
+		ns = gtod->wall_time_coarse.tv_nsec;
+		secs += gtod->wall_to_monotonic.tv_sec;
+		ns += gtod->wall_to_monotonic.tv_nsec;
+	} while (unlikely(read_seqretry(&gtod->lock, seq)));
+	vset_normalized_timespec(ts, secs, ns);
+	return 0;
+}
+
 notrace int __vdso_clock_gettime(clockid_t clock, struct timespec *ts)
 {
-	if (likely(gtod->sysctl_enabled && gtod->clock.vread))
+	if (likely(gtod->sysctl_enabled))
 		switch (clock) {
 		case CLOCK_REALTIME:
-			return do_realtime(ts);
+			if (likely(gtod->clock.vread))
+				return do_realtime(ts);
+			break;
 		case CLOCK_MONOTONIC:
-			return do_monotonic(ts);
+			if (likely(gtod->clock.vread))
+				return do_monotonic(ts);
+			break;
+		case CLOCK_REALTIME_COARSE:
+			return do_realtime_coarse(ts);
+		case CLOCK_MONOTONIC_COARSE:
+			return do_monotonic_coarse(ts);
 		}
 	return vdso_fallback_gettime(clock, ts);
 }
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 8848120d291b..19085ff0484a 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -59,9 +59,8 @@ static struct irqaction timer_irqaction = {
 
 void __init time_init(void)
 {
-	xtime.tv_nsec = 0;
-	xtime.tv_sec = read_persistent_clock();
-
+	/* FIXME: xtime&wall_to_monotonic are set in timekeeping_init. */
+	read_persistent_clock(&xtime);
 	set_normalized_timespec(&wall_to_monotonic,
 		-xtime.tv_sec, -xtime.tv_nsec);
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ab2fa4eeb364..f2df6e2a224c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -255,6 +255,15 @@ config PATA_ARTOP
 
 	  If unsure, say N.
 
+config PATA_ATP867X
+	tristate "ARTOP/Acard ATP867X PATA support"
+	depends on PCI
+	help
+	  This option enables support for ARTOP/Acard ATP867X PATA
+	  controllers.
+
+	  If unsure, say N.
+
 config PATA_AT32
 	tristate "Atmel AVR32 PATA support (Experimental)"
 	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 463eb52236aa..01e126f343b3 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
+obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
 obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
 obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index d4cd9c203314..acd1162712b1 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2930,8 +2930,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ahci_sb600_32bit_only(pdev))
 		hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
 
-	if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
-		pci_enable_msi(pdev);
+	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
+		pci_intx(pdev, 1);
 
 	/* save initial config */
 	ahci_save_initial_config(pdev, hpriv);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index df31deac5c82..0ddaf43d68c6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5024,8 +5024,6 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 		struct ata_device *dev = qc->dev;
 		struct ata_eh_info *ehi = &dev->link->eh_info;
 
-		WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
-
 		if (unlikely(qc->err_mask))
 			qc->flags |= ATA_QCFLAG_FAILED;
 
@@ -5038,6 +5036,8 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 			}
 		}
 
+		WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
+
 		/* read result TF if requested */
 		if (qc->flags & ATA_QCFLAG_RESULT_TF)
 			fill_result_tf(qc);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 33a74f11171c..567f3f72774e 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -307,6 +307,9 @@ static unsigned long nv_mode_filter(struct ata_device *dev,
 		limit |= ATA_MASK_PIO;
 	if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA)))
 		limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA;
+	/* PIO4, MWDMA2, UDMA2 should always be supported regardless of
+	   cable detection result */
+	limit |= ata_pack_xfermask(ATA_PIO4, ATA_MWDMA2, ATA_UDMA2);
 
 	ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
 			"BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n",
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
new file mode 100644
index 000000000000..7990de925d2e
--- /dev/null
+++ b/drivers/ata/pata_atp867x.c
@@ -0,0 +1,548 @@
+/*
+ * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
+ *
+ *	(C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
+ *
+ * Per Atp867 data sheet rev 1.2, Acard.
+ * Based in part on early ide code from
+ *	2003-2004 by Eric Uhrhane, Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * TODO:
+ *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define	DRV_NAME	"pata_atp867x"
+#define	DRV_VERSION	"0.7.5"
+
+/*
+ * IO Registers
+ * Note that all runtime hot priv ports are cached in ap private_data
+ */
+
+enum {
+	ATP867X_IO_CHANNEL_OFFSET	= 0x10,
+
+	/*
+	 * IO Register Bitfields
+	 */
+
+	ATP867X_IO_PIOSPD_ACTIVE_SHIFT	= 4,
+	ATP867X_IO_PIOSPD_RECOVER_SHIFT	= 0,
+
+	ATP867X_IO_DMAMODE_MSTR_SHIFT	= 0,
+	ATP867X_IO_DMAMODE_MSTR_MASK	= 0x07,
+	ATP867X_IO_DMAMODE_SLAVE_SHIFT	= 4,
+	ATP867X_IO_DMAMODE_SLAVE_MASK	= 0x70,
+
+	ATP867X_IO_DMAMODE_UDMA_6	= 0x07,
+	ATP867X_IO_DMAMODE_UDMA_5	= 0x06,
+	ATP867X_IO_DMAMODE_UDMA_4	= 0x05,
+	ATP867X_IO_DMAMODE_UDMA_3	= 0x04,
+	ATP867X_IO_DMAMODE_UDMA_2	= 0x03,
+	ATP867X_IO_DMAMODE_UDMA_1	= 0x02,
+	ATP867X_IO_DMAMODE_UDMA_0	= 0x01,
+	ATP867X_IO_DMAMODE_DISABLE	= 0x00,
+
+	ATP867X_IO_SYS_INFO_66MHZ	= 0x04,
+	ATP867X_IO_SYS_INFO_SLOW_UDMA5	= 0x02,
+	ATP867X_IO_SYS_MASK_RESERVED	= (~0xf1),
+
+	ATP867X_IO_PORTSPD_VAL		= 0x1143,
+	ATP867X_PREREAD_VAL		= 0x0200,
+
+	ATP867X_NUM_PORTS		= 4,
+	ATP867X_BAR_IOBASE		= 0,
+	ATP867X_BAR_ROMBASE		= 6,
+};
+
+#define ATP867X_IOBASE(ap)		((ap)->host->iomap[0])
+#define ATP867X_SYS_INFO(ap)		(0x3F + ATP867X_IOBASE(ap))
+
+#define ATP867X_IO_PORTBASE(ap, port)	(0x00 + ATP867X_IOBASE(ap) + \
+					(port) * ATP867X_IO_CHANNEL_OFFSET)
+#define ATP867X_IO_DMABASE(ap, port)	(0x40 + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+
+#define ATP867X_IO_STATUS(ap, port)	(0x07 + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+#define ATP867X_IO_ALTSTATUS(ap, port)	(0x0E + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+
+/*
+ * hot priv ports
+ */
+#define ATP867X_IO_MSTRPIOSPD(ap, port)	(0x08 + \
+					ATP867X_IO_DMABASE((ap), (port)))
+#define ATP867X_IO_SLAVPIOSPD(ap, port)	(0x09 + \
+					ATP867X_IO_DMABASE((ap), (port)))
+#define ATP867X_IO_8BPIOSPD(ap, port)	(0x0A + \
+					ATP867X_IO_DMABASE((ap), (port)))
+#define ATP867X_IO_DMAMODE(ap, port)	(0x0B + \
+					ATP867X_IO_DMABASE((ap), (port)))
+
+#define ATP867X_IO_PORTSPD(ap, port)	(0x4A + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+#define ATP867X_IO_PREREAD(ap, port)	(0x4C + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+
+struct atp867x_priv {
+	void __iomem *dma_mode;
+	void __iomem *mstr_piospd;
+	void __iomem *slave_piospd;
+	void __iomem *eightb_piospd;
+	int		pci66mhz;
+};
+
+static inline u8 atp867x_speed_to_mode(u8 speed)
+{
+	return speed - XFER_UDMA_0 + 1;
+}
+
+static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct atp867x_priv *dp = ap->private_data;
+	u8 speed = adev->dma_mode;
+	u8 b;
+	u8 mode;
+
+	mode = atp867x_speed_to_mode(speed);
+
+	/*
+	 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
+	 * on 66MHz bus
+	 *   rev-A: UDMA_1~4 (5, 6 no change)
+	 *   rev-B: all UDMA modes
+	 *   UDMA_0 stays not to disable UDMA
+	 */
+	if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
+	   (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
+	    mode < ATP867X_IO_DMAMODE_UDMA_5))
+		mode--;
+
+	b = ioread8(dp->dma_mode);
+	if (adev->devno & 1) {
+		b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
+			(mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
+	} else {
+		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
+			(mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
+	}
+	iowrite8(b, dp->dma_mode);
+}
+
+static int atp867x_get_active_clocks_shifted(unsigned int clk)
+{
+	unsigned char clocks = clk;
+
+	switch (clocks) {
+	case 0:
+		clocks = 1;
+		break;
+	case 1 ... 7:
+		break;
+	case 8 ... 12:
+		clocks = 7;
+		break;
+	default:
+		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
+			"Using default 8clk.\n", clk);
+		clocks = 0;	/* 8 clk */
+		break;
+	}
+	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
+}
+
+static int atp867x_get_recover_clocks_shifted(unsigned int clk)
+{
+	unsigned char clocks = clk;
+
+	switch (clocks) {
+	case 0:
+		clocks = 1;
+		break;
+	case 1 ... 11:
+		break;
+	case 12:
+		clocks = 0;
+		break;
+	case 13: case 14:
+		--clocks;
+		break;
+	case 15:
+		break;
+	default:
+		printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
+			"Using default 15clk.\n", clk);
+		clocks = 0;	/* 12 clk */
+		break;
+	}
+	return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
+}
+
+static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct ata_device *peer = ata_dev_pair(adev);
+	struct atp867x_priv *dp = ap->private_data;
+	u8 speed = adev->pio_mode;
+	struct ata_timing t, p;
+	int T, UT;
+	u8 b;
+
+	T = 1000000000 / 33333;
+	UT = T / 4;
+
+	ata_timing_compute(adev, speed, &t, T, UT);
+	if (peer && peer->pio_mode) {
+		ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
+		ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
+	}
+
+	b = ioread8(dp->dma_mode);
+	if (adev->devno & 1)
+		b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
+	else
+		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
+	iowrite8(b, dp->dma_mode);
+
+	b = atp867x_get_active_clocks_shifted(t.active) |
+		atp867x_get_recover_clocks_shifted(t.recover);
+	if (dp->pci66mhz)
+		b += 0x10;
+
+	if (adev->devno & 1)
+		iowrite8(b, dp->slave_piospd);
+	else
+		iowrite8(b, dp->mstr_piospd);
+
+	/*
+	 * use the same value for comand timing as for PIO timimg
+	 */
+	iowrite8(b, dp->eightb_piospd);
+}
+
+static int atp867x_cable_detect(struct ata_port *ap)
+{
+	return ATA_CBL_PATA40_SHORT;
+}
+
+static struct scsi_host_template atp867x_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations atp867x_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= atp867x_cable_detect,
+	.set_piomode		= atp867x_set_piomode,
+	.set_dmamode		= atp867x_set_dmamode,
+};
+
+
+#ifdef	ATP867X_DEBUG
+static void atp867x_check_res(struct pci_dev *pdev)
+{
+	int i;
+	unsigned long start, len;
+
+	/* Check the PCI resources for this channel are enabled */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		start = pci_resource_start(pdev, i);
+		len   = pci_resource_len(pdev, i);
+		printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n",
+			start, len);
+	}
+}
+
+static void atp867x_check_ports(struct ata_port *ap, int port)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	struct atp867x_priv *dp = ap->private_data;
+
+	printk(KERN_DEBUG "ATP867X: port[%d] addresses\n"
+		"  cmd_addr	=0x%llx, 0x%llx\n"
+		"  ctl_addr	=0x%llx, 0x%llx\n"
+		"  bmdma_addr	=0x%llx, 0x%llx\n"
+		"  data_addr	=0x%llx\n"
+		"  error_addr	=0x%llx\n"
+		"  feature_addr	=0x%llx\n"
+		"  nsect_addr	=0x%llx\n"
+		"  lbal_addr	=0x%llx\n"
+		"  lbam_addr	=0x%llx\n"
+		"  lbah_addr	=0x%llx\n"
+		"  device_addr	=0x%llx\n"
+		"  status_addr	=0x%llx\n"
+		"  command_addr	=0x%llx\n"
+		"  dp->dma_mode	=0x%llx\n"
+		"  dp->mstr_piospd	=0x%llx\n"
+		"  dp->slave_piospd	=0x%llx\n"
+		"  dp->eightb_piospd	=0x%llx\n"
+		"  dp->pci66mhz		=0x%lx\n",
+		port,
+		(unsigned long long)ioaddr->cmd_addr,
+		(unsigned long long)ATP867X_IO_PORTBASE(ap, port),
+		(unsigned long long)ioaddr->ctl_addr,
+		(unsigned long long)ATP867X_IO_ALTSTATUS(ap, port),
+		(unsigned long long)ioaddr->bmdma_addr,
+		(unsigned long long)ATP867X_IO_DMABASE(ap, port),
+		(unsigned long long)ioaddr->data_addr,
+		(unsigned long long)ioaddr->error_addr,
+		(unsigned long long)ioaddr->feature_addr,
+		(unsigned long long)ioaddr->nsect_addr,
+		(unsigned long long)ioaddr->lbal_addr,
+		(unsigned long long)ioaddr->lbam_addr,
+		(unsigned long long)ioaddr->lbah_addr,
+		(unsigned long long)ioaddr->device_addr,
+		(unsigned long long)ioaddr->status_addr,
+		(unsigned long long)ioaddr->command_addr,
+		(unsigned long long)dp->dma_mode,
+		(unsigned long long)dp->mstr_piospd,
+		(unsigned long long)dp->slave_piospd,
+		(unsigned long long)dp->eightb_piospd,
+		(unsigned long)dp->pci66mhz);
+}
+#endif
+
+static int atp867x_set_priv(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct atp867x_priv *dp;
+	int port = ap->port_no;
+
+	dp = ap->private_data =
+		devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
+	if (dp == NULL)
+		return -ENOMEM;
+
+	dp->dma_mode	 = ATP867X_IO_DMAMODE(ap, port);
+	dp->mstr_piospd	 = ATP867X_IO_MSTRPIOSPD(ap, port);
+	dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port);
+	dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port);
+
+	dp->pci66mhz =
+		ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ;
+
+	return 0;
+}
+
+static void atp867x_fixup(struct ata_host *host)
+{
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	struct ata_port *ap = host->ports[0];
+	int i;
+	u8 v;
+
+	/*
+	 * Broken BIOS might not set latency high enough
+	 */
+	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v);
+	if (v < 0x80) {
+		v = 0x80;
+		pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v);
+		printk(KERN_DEBUG "ATP867X: set latency timer of device %s"
+			" to %d\n", pci_name(pdev), v);
+	}
+
+	/*
+	 * init 8bit io ports speed(0aaarrrr) to 43h and
+	 * init udma modes of master/slave to 0/0(11h)
+	 */
+	for (i = 0; i < ATP867X_NUM_PORTS; i++)
+		iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i));
+
+	/*
+	 * init PreREAD counts
+	 */
+	for (i = 0; i < ATP867X_NUM_PORTS; i++)
+		iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i));
+
+	v = ioread8(ATP867X_IOBASE(ap) + 0x28);
+	v &= 0xcf;	/* Enable INTA#: bit4=0 means enable */
+	v |= 0xc0;	/* Enable PCI burst, MRM & not immediate interrupts */
+	iowrite8(v, ATP867X_IOBASE(ap) + 0x28);
+
+	/*
+	 * Turn off the over clocked udma5 mode, only for Rev-B
+	 */
+	v = ioread8(ATP867X_SYS_INFO(ap));
+	v &= ATP867X_IO_SYS_MASK_RESERVED;
+	if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B)
+		v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5;
+	iowrite8(v, ATP867X_SYS_INFO(ap));
+}
+
+static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
+{
+	struct device *gdev = host->dev;
+	struct pci_dev *pdev = to_pci_dev(gdev);
+	unsigned int mask = 0;
+	int i, rc;
+
+	/*
+	 * do not map rombase
+	 */
+	rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME);
+	if (rc == -EBUSY)
+		pcim_pin_device(pdev);
+	if (rc)
+		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+
+#ifdef	ATP867X_DEBUG
+	atp867x_check_res(pdev);
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+		printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i,
+			(unsigned long long)(host->iomap[i]));
+#endif
+
+	/*
+	 * request, iomap BARs and init port addresses accordingly
+	 */
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		struct ata_ioports *ioaddr = &ap->ioaddr;
+
+		ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i);
+		ioaddr->ctl_addr = ioaddr->altstatus_addr
+				 = ATP867X_IO_ALTSTATUS(ap, i);
+		ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i);
+
+		ata_sff_std_ports(ioaddr);
+		rc = atp867x_set_priv(ap);
+		if (rc)
+			return rc;
+
+#ifdef	ATP867X_DEBUG
+		atp867x_check_ports(ap, i);
+#endif
+		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+			(unsigned long)ioaddr->cmd_addr,
+			(unsigned long)ioaddr->ctl_addr);
+		ata_port_desc(ap, "bmdma 0x%lx",
+			(unsigned long)ioaddr->bmdma_addr);
+
+		mask |= 1 << i;
+	}
+
+	if (!mask) {
+		dev_printk(KERN_ERR, gdev, "no available native port\n");
+		return -ENODEV;
+	}
+
+	atp867x_fixup(host);
+
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	return rc;
+}
+
+static int atp867x_init_one(struct pci_dev *pdev,
+	const struct pci_device_id *id)
+{
+	static int printed_version;
+	static const struct ata_port_info info_867x = {
+		.flags		= ATA_FLAG_SLAVE_POSS,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask 	= ATA_UDMA6,
+		.port_ops	= &atp867x_ops,
+	};
+
+	struct ata_host *host;
+	const struct ata_port_info *ppi[] = { &info_867x, NULL };
+	int rc;
+
+	if (!printed_version++)
+		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)",
+		pdev->device);
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			"failed to allocate ATA host\n");
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	rc = atp867x_ata_pci_sff_init_host(host);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to init host\n");
+		goto err_out;
+	}
+
+	pci_set_master(pdev);
+
+	rc = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				IRQF_SHARED, &atp867x_sht);
+	if (rc)
+		dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n");
+
+err_out:
+	return rc;
+}
+
+static struct pci_device_id atp867x_pci_tbl[] = {
+	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A),	0 },
+	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B),	0 },
+	{ },
+};
+
+static struct pci_driver atp867x_driver = {
+	.name 		= DRV_NAME,
+	.id_table 	= atp867x_pci_tbl,
+	.probe 		= atp867x_init_one,
+	.remove		= ata_pci_remove_one,
+};
+
+static int __init atp867x_init(void)
+{
+	return pci_register_driver(&atp867x_driver);
+}
+
+static void __exit atp867x_exit(void)
+{
+	pci_unregister_driver(&atp867x_driver);
+}
+
+MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc.");
+MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(atp867x_init);
+module_exit(atp867x_exit);
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index b1fd7d62071a..07d8d00b4d34 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -56,6 +56,7 @@ enum {
 	/* host register offsets (from host->iomap[PDC_MMIO_BAR]) */
 	PDC_INT_SEQMASK		= 0x40,	/* Mask of asserted SEQ INTs */
 	PDC_FLASH_CTL		= 0x44, /* Flash control register */
+	PDC_PCI_CTL		= 0x48, /* PCI control/status reg */
 	PDC_SATA_PLUG_CSR	= 0x6C, /* SATA Plug control/status reg */
 	PDC2_SATA_PLUG_CSR	= 0x60, /* SATAII Plug control/status reg */
 	PDC_TBG_MODE		= 0x41C, /* TBG mode (not SATAII) */
@@ -75,7 +76,17 @@ enum {
 	PDC_CTLSTAT		= 0x60,	/* IDE control and status (per port) */
 
 	/* per-port SATA register offsets (from ap->ioaddr.scr_addr) */
+	PDC_SATA_ERROR		= 0x04,
 	PDC_PHYMODE4		= 0x14,
+	PDC_LINK_LAYER_ERRORS	= 0x6C,
+	PDC_FPDMA_CTLSTAT	= 0xD8,
+	PDC_INTERNAL_DEBUG_1	= 0xF8,	/* also used for PATA */
+	PDC_INTERNAL_DEBUG_2	= 0xFC,	/* also used for PATA */
+
+	/* PDC_FPDMA_CTLSTAT bit definitions */
+	PDC_FPDMA_CTLSTAT_RESET			= 1 << 3,
+	PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG	= 1 << 10,
+	PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG	= 1 << 11,
 
 	/* PDC_GLOBAL_CTL bit definitions */
 	PDC_PH_ERR		= (1 <<  8), /* PCI error while loading packet */
@@ -195,9 +206,12 @@ static struct ata_port_operations pdc_sata_ops = {
 	.hardreset		= pdc_sata_hardreset,
 };
 
-/* First-generation chips need a more restrictive ->check_atapi_dma op */
+/* First-generation chips need a more restrictive ->check_atapi_dma op,
+   and ->freeze/thaw that ignore the hotplug controls. */
 static struct ata_port_operations pdc_old_sata_ops = {
 	.inherits		= &pdc_sata_ops,
+	.freeze			= pdc_freeze,
+	.thaw			= pdc_thaw,
 	.check_atapi_dma	= pdc_old_sata_check_atapi_dma,
 };
 
@@ -356,12 +370,76 @@ static int pdc_sata_port_start(struct ata_port *ap)
 	return 0;
 }
 
+static void pdc_fpdma_clear_interrupt_flag(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+	u32 tmp;
+
+	tmp = readl(sata_mmio + PDC_FPDMA_CTLSTAT);
+	tmp |= PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG;
+	tmp |= PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG;
+
+	/* It's not allowed to write to the entire FPDMA_CTLSTAT register
+	   when NCQ is running. So do a byte-sized write to bits 10 and 11. */
+	writeb(tmp >> 8, sata_mmio + PDC_FPDMA_CTLSTAT + 1);
+	readb(sata_mmio + PDC_FPDMA_CTLSTAT + 1); /* flush */
+}
+
+static void pdc_fpdma_reset(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+	u8 tmp;
+
+	tmp = (u8)readl(sata_mmio + PDC_FPDMA_CTLSTAT);
+	tmp &= 0x7F;
+	tmp |= PDC_FPDMA_CTLSTAT_RESET;
+	writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT);
+	readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */
+	udelay(100);
+	tmp &= ~PDC_FPDMA_CTLSTAT_RESET;
+	writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT);
+	readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */
+
+	pdc_fpdma_clear_interrupt_flag(ap);
+}
+
+static void pdc_not_at_command_packet_phase(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+	unsigned int i;
+	u32 tmp;
+
+	/* check not at ASIC packet command phase */
+	for (i = 0; i < 100; ++i) {
+		writel(0, sata_mmio + PDC_INTERNAL_DEBUG_1);
+		tmp = readl(sata_mmio + PDC_INTERNAL_DEBUG_2);
+		if ((tmp & 0xF) != 1)
+			break;
+		udelay(100);
+	}
+}
+
+static void pdc_clear_internal_debug_record_error_register(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+
+	writel(0xffffffff, sata_mmio + PDC_SATA_ERROR);
+	writel(0xffff0000, sata_mmio + PDC_LINK_LAYER_ERRORS);
+}
+
 static void pdc_reset_port(struct ata_port *ap)
 {
 	void __iomem *ata_ctlstat_mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
 	unsigned int i;
 	u32 tmp;
 
+	if (ap->flags & PDC_FLAG_GEN_II)
+		pdc_not_at_command_packet_phase(ap);
+
+	tmp = readl(ata_ctlstat_mmio);
+	tmp |= PDC_RESET;
+	writel(tmp, ata_ctlstat_mmio);
+
 	for (i = 11; i > 0; i--) {
 		tmp = readl(ata_ctlstat_mmio);
 		if (tmp & PDC_RESET)
@@ -376,6 +454,11 @@ static void pdc_reset_port(struct ata_port *ap)
 	tmp &= ~PDC_RESET;
 	writel(tmp, ata_ctlstat_mmio);
 	readl(ata_ctlstat_mmio);	/* flush */
+
+	if (sata_scr_valid(&ap->link) && (ap->flags & PDC_FLAG_GEN_II)) {
+		pdc_fpdma_reset(ap);
+		pdc_clear_internal_debug_record_error_register(ap);
+	}
 }
 
 static int pdc_pata_cable_detect(struct ata_port *ap)
@@ -626,11 +709,6 @@ static unsigned int pdc_sata_ata_port_to_ata_no(const struct ata_port *ap)
 	return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags));
 }
 
-static unsigned int pdc_sata_hotplug_offset(const struct ata_port *ap)
-{
-	return (ap->flags & PDC_FLAG_GEN_II) ? PDC2_SATA_PLUG_CSR : PDC_SATA_PLUG_CSR;
-}
-
 static void pdc_freeze(struct ata_port *ap)
 {
 	void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
@@ -647,7 +725,7 @@ static void pdc_sata_freeze(struct ata_port *ap)
 {
 	struct ata_host *host = ap->host;
 	void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
-	unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+	unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR;
 	unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
 	u32 hotplug_status;
 
@@ -685,7 +763,7 @@ static void pdc_sata_thaw(struct ata_port *ap)
 {
 	struct ata_host *host = ap->host;
 	void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
-	unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+	unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR;
 	unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
 	u32 hotplug_status;
 
@@ -708,11 +786,50 @@ static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
 	return ata_sff_softreset(link, class, deadline);
 }
 
+static unsigned int pdc_ata_port_to_ata_no(const struct ata_port *ap)
+{
+	void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
+
+	/* ata_mmio == host_mmio + 0x200 + ata_no * 0x80 */
+	return (ata_mmio - host_mmio - 0x200) / 0x80;
+}
+
+static void pdc_hard_reset_port(struct ata_port *ap)
+{
+	void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
+	void __iomem *pcictl_b1_mmio = host_mmio + PDC_PCI_CTL + 1;
+	unsigned int ata_no = pdc_ata_port_to_ata_no(ap);
+	u8 tmp;
+
+	spin_lock(&ap->host->lock);
+
+	tmp = readb(pcictl_b1_mmio);
+	tmp &= ~(0x10 << ata_no);
+	writeb(tmp, pcictl_b1_mmio);
+	readb(pcictl_b1_mmio); /* flush */
+	udelay(100);
+	tmp |= (0x10 << ata_no);
+	writeb(tmp, pcictl_b1_mmio);
+	readb(pcictl_b1_mmio); /* flush */
+
+	spin_unlock(&ap->host->lock);
+}
+
 static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
 			      unsigned long deadline)
 {
+	if (link->ap->flags & PDC_FLAG_GEN_II)
+		pdc_not_at_command_packet_phase(link->ap);
+	/* hotplug IRQs should have been masked by pdc_sata_freeze() */
+	pdc_hard_reset_port(link->ap);
 	pdc_reset_port(link->ap);
-	return sata_sff_hardreset(link, class, deadline);
+
+	/* sata_promise can't reliably acquire the first D2H Reg FIS
+	 * after hardreset.  Do non-waiting hardreset and request
+	 * follow-up SRST.
+	 */
+	return sata_std_hardreset(link, class, deadline);
 }
 
 static void pdc_error_handler(struct ata_port *ap)
@@ -832,14 +949,14 @@ static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
 	spin_lock(&host->lock);
 
 	/* read and clear hotplug flags for all ports */
-	if (host->ports[0]->flags & PDC_FLAG_GEN_II)
+	if (host->ports[0]->flags & PDC_FLAG_GEN_II) {
 		hotplug_offset = PDC2_SATA_PLUG_CSR;
-	else
-		hotplug_offset = PDC_SATA_PLUG_CSR;
-	hotplug_status = readl(host_mmio + hotplug_offset);
-	if (hotplug_status & 0xff)
-		writel(hotplug_status | 0xff, host_mmio + hotplug_offset);
-	hotplug_status &= 0xff;	/* clear uninteresting bits */
+		hotplug_status = readl(host_mmio + hotplug_offset);
+		if (hotplug_status & 0xff)
+			writel(hotplug_status | 0xff, host_mmio + hotplug_offset);
+		hotplug_status &= 0xff;	/* clear uninteresting bits */
+	} else
+		hotplug_status = 0;
 
 	/* reading should also clear interrupts */
 	mask = readl(host_mmio + PDC_INT_SEQMASK);
@@ -1034,9 +1151,11 @@ static void pdc_host_init(struct ata_host *host)
 	tmp = readl(host_mmio + hotplug_offset);
 	writel(tmp | 0xff, host_mmio + hotplug_offset);
 
-	/* unmask plug/unplug ints */
 	tmp = readl(host_mmio + hotplug_offset);
-	writel(tmp & ~0xff0000, host_mmio + hotplug_offset);
+	if (is_gen2)	/* unmask plug/unplug ints */
+		writel(tmp & ~0xff0000, host_mmio + hotplug_offset);
+	else		/* mask plug/unplug ints */
+		writel(tmp | 0xff0000, host_mmio + hotplug_offset);
 
 	/* don't initialise TBG or SLEW on 2nd generation chips */
 	if (is_gen2)
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index ce66a70184f7..87060266ef91 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -126,6 +126,19 @@ config HW_RANDOM_OMAP
 
  	  If unsure, say Y.
 
+config HW_RANDOM_OCTEON
+	tristate "Octeon Random Number Generator support"
+	depends on HW_RANDOM && CPU_CAVIUM_OCTEON
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Octeon processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called octeon-rng.
+
+	  If unsure, say Y.
+
 config HW_RANDOM_PASEMI
 	tristate "PA Semi HW Random Number Generator support"
 	depends on HW_RANDOM && PPC_PASEMI
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 676828ba8123..5eeb1303f0d0 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
 obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
 obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
+obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
diff --git a/drivers/char/hw_random/octeon-rng.c b/drivers/char/hw_random/octeon-rng.c
new file mode 100644
index 000000000000..54b0d9ba65cf
--- /dev/null
+++ b/drivers/char/hw_random/octeon-rng.c
@@ -0,0 +1,147 @@
+/*
+ * Hardware Random Number Generator support for Cavium Networks
+ * Octeon processor family.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Cavium Networks
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-rnm-defs.h>
+
+struct octeon_rng {
+	struct hwrng ops;
+	void __iomem *control_status;
+	void __iomem *result;
+};
+
+static int octeon_rng_init(struct hwrng *rng)
+{
+	union cvmx_rnm_ctl_status ctl;
+	struct octeon_rng *p = container_of(rng, struct octeon_rng, ops);
+
+	ctl.u64 = 0;
+	ctl.s.ent_en = 1; /* Enable the entropy source.  */
+	ctl.s.rng_en = 1; /* Enable the RNG hardware.  */
+	cvmx_write_csr((u64)p->control_status, ctl.u64);
+	return 0;
+}
+
+static void octeon_rng_cleanup(struct hwrng *rng)
+{
+	union cvmx_rnm_ctl_status ctl;
+	struct octeon_rng *p = container_of(rng, struct octeon_rng, ops);
+
+	ctl.u64 = 0;
+	/* Disable everything.  */
+	cvmx_write_csr((u64)p->control_status, ctl.u64);
+}
+
+static int octeon_rng_data_read(struct hwrng *rng, u32 *data)
+{
+	struct octeon_rng *p = container_of(rng, struct octeon_rng, ops);
+
+	*data = cvmx_read64_uint32((u64)p->result);
+	return sizeof(u32);
+}
+
+static int __devinit octeon_rng_probe(struct platform_device *pdev)
+{
+	struct resource *res_ports;
+	struct resource *res_result;
+	struct octeon_rng *rng;
+	int ret;
+	struct hwrng ops = {
+		.name = "octeon",
+		.init = octeon_rng_init,
+		.cleanup = octeon_rng_cleanup,
+		.data_read = octeon_rng_data_read
+	};
+
+	rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
+	if (!rng)
+		return -ENOMEM;
+
+	res_ports = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_ports)
+		goto err_ports;
+
+	res_result = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res_result)
+		goto err_ports;
+
+
+	rng->control_status = devm_ioremap_nocache(&pdev->dev,
+						   res_ports->start,
+						   sizeof(u64));
+	if (!rng->control_status)
+		goto err_ports;
+
+	rng->result = devm_ioremap_nocache(&pdev->dev,
+					   res_result->start,
+					   sizeof(u64));
+	if (!rng->result)
+		goto err_r;
+
+	rng->ops = ops;
+
+	dev_set_drvdata(&pdev->dev, &rng->ops);
+	ret = hwrng_register(&rng->ops);
+	if (ret)
+		goto err;
+
+	dev_info(&pdev->dev, "Octeon Random Number Generator\n");
+
+	return 0;
+err:
+	devm_iounmap(&pdev->dev, rng->control_status);
+err_r:
+	devm_iounmap(&pdev->dev, rng->result);
+err_ports:
+	devm_kfree(&pdev->dev, rng);
+	return -ENOENT;
+}
+
+static int __exit octeon_rng_remove(struct platform_device *pdev)
+{
+	struct hwrng *rng = dev_get_drvdata(&pdev->dev);
+
+	hwrng_unregister(rng);
+
+	return 0;
+}
+
+static struct platform_driver octeon_rng_driver = {
+	.driver = {
+		.name		= "octeon_rng",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= octeon_rng_probe,
+	.remove		= __exit_p(octeon_rng_remove),
+};
+
+static int __init octeon_rng_mod_init(void)
+{
+	return platform_driver_register(&octeon_rng_driver);
+}
+
+static void __exit octeon_rng_mod_exit(void)
+{
+	platform_driver_unregister(&octeon_rng_driver);
+}
+
+module_init(octeon_rng_mod_init);
+module_exit(octeon_rng_mod_exit);
+
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c
index acd8e9ed474a..87c67b42bc08 100644
--- a/drivers/char/mbcs.c
+++ b/drivers/char/mbcs.c
@@ -15,6 +15,7 @@
 #include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
+#include <linux/kernel.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
@@ -715,8 +716,8 @@ static ssize_t show_algo(struct device *dev, struct device_attribute *attr, char
 	 */
 	debug0 = *(uint64_t *) soft->debug_addr;
 
-	return sprintf(buf, "0x%lx 0x%lx\n",
-		       (debug0 >> 32), (debug0 & 0xffffffff));
+	return sprintf(buf, "0x%x 0x%x\n",
+		       upper_32_bits(debug0), lower_32_bits(debug0));
 }
 
 static ssize_t store_algo(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index b33d6688e910..53761cefa915 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -120,8 +120,10 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 		/* Stuff the data into the input queue of the other end */
 		c = tty_insert_flip_string(to, buf, c);
 		/* And shovel */
-		tty_flip_buffer_push(to);
-		tty_wakeup(tty);
+		if (c) {
+			tty_flip_buffer_push(to);
+			tty_wakeup(tty);
+		}
 	}
 	return c;
 }
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 404f4c1ee431..6aa88f50b039 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2948,9 +2948,6 @@ int __init vty_init(const struct file_operations *console_fops)
 		panic("Couldn't register console driver\n");
 	kbd_init();
 	console_map_init();
-#ifdef CONFIG_PROM_CONSOLE
-	prom_con_init();
-#endif
 #ifdef CONFIG_MDA_CONSOLE
 	mda_console_init();
 #endif
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 2968ed6a9c49..3938c7817095 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -61,6 +61,8 @@ static DEFINE_SPINLOCK(cpufreq_driver_lock);
  *   are concerned with are online after they get the lock.
  * - Governor routines that can be called in cpufreq hotplug path should not
  *   take this sem as top level hotplug notifier handler takes this.
+ * - Lock should not be held across
+ *     __cpufreq_governor(data, CPUFREQ_GOV_STOP);
  */
 static DEFINE_PER_CPU(int, policy_cpu);
 static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem);
@@ -686,6 +688,9 @@ static struct attribute *default_attrs[] = {
 	NULL
 };
 
+struct kobject *cpufreq_global_kobject;
+EXPORT_SYMBOL(cpufreq_global_kobject);
+
 #define to_policy(k) container_of(k, struct cpufreq_policy, kobj)
 #define to_attr(a) container_of(a, struct freq_attr, attr)
 
@@ -756,92 +761,20 @@ static struct kobj_type ktype_cpufreq = {
 	.release	= cpufreq_sysfs_release,
 };
 
-
-/**
- * cpufreq_add_dev - add a CPU device
- *
- * Adds the cpufreq interface for a CPU device.
- *
- * The Oracle says: try running cpufreq registration/unregistration concurrently
- * with with cpu hotplugging and all hell will break loose. Tried to clean this
- * mess up, but more thorough testing is needed. - Mathieu
+/*
+ * Returns:
+ *   Negative: Failure
+ *   0:        Success
+ *   Positive: When we have a managed CPU and the sysfs got symlinked
  */
-static int cpufreq_add_dev(struct sys_device *sys_dev)
+int cpufreq_add_dev_policy(unsigned int cpu, struct cpufreq_policy *policy,
+		struct sys_device *sys_dev)
 {
-	unsigned int cpu = sys_dev->id;
 	int ret = 0;
-	struct cpufreq_policy new_policy;
-	struct cpufreq_policy *policy;
-	struct freq_attr **drv_attr;
-	struct sys_device *cpu_sys_dev;
+#ifdef CONFIG_SMP
 	unsigned long flags;
 	unsigned int j;
 
-	if (cpu_is_offline(cpu))
-		return 0;
-
-	cpufreq_debug_disable_ratelimit();
-	dprintk("adding CPU %u\n", cpu);
-
-#ifdef CONFIG_SMP
-	/* check whether a different CPU already registered this
-	 * CPU because it is in the same boat. */
-	policy = cpufreq_cpu_get(cpu);
-	if (unlikely(policy)) {
-		cpufreq_cpu_put(policy);
-		cpufreq_debug_enable_ratelimit();
-		return 0;
-	}
-#endif
-
-	if (!try_module_get(cpufreq_driver->owner)) {
-		ret = -EINVAL;
-		goto module_out;
-	}
-
-	policy = kzalloc(sizeof(struct cpufreq_policy), GFP_KERNEL);
-	if (!policy) {
-		ret = -ENOMEM;
-		goto nomem_out;
-	}
-	if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) {
-		ret = -ENOMEM;
-		goto err_free_policy;
-	}
-	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
-		ret = -ENOMEM;
-		goto err_free_cpumask;
-	}
-
-	policy->cpu = cpu;
-	cpumask_copy(policy->cpus, cpumask_of(cpu));
-
-	/* Initially set CPU itself as the policy_cpu */
-	per_cpu(policy_cpu, cpu) = cpu;
-	ret = (lock_policy_rwsem_write(cpu) < 0);
-	WARN_ON(ret);
-
-	init_completion(&policy->kobj_unregister);
-	INIT_WORK(&policy->update, handle_update);
-
-	/* Set governor before ->init, so that driver could check it */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-	/* call driver. From then on the cpufreq must be able
-	 * to accept all calls to ->verify and ->setpolicy for this CPU
-	 */
-	ret = cpufreq_driver->init(policy);
-	if (ret) {
-		dprintk("initialization failed\n");
-		goto err_unlock_policy;
-	}
-	policy->user_policy.min = policy->min;
-	policy->user_policy.max = policy->max;
-
-	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
-				     CPUFREQ_START, policy);
-
-#ifdef CONFIG_SMP
-
 #ifdef CONFIG_HOTPLUG_CPU
 	if (per_cpu(cpufreq_cpu_governor, cpu)) {
 		policy->governor = per_cpu(cpufreq_cpu_governor, cpu);
@@ -872,9 +805,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 				/* Should not go through policy unlock path */
 				if (cpufreq_driver->exit)
 					cpufreq_driver->exit(policy);
-				ret = -EBUSY;
 				cpufreq_cpu_put(managed_policy);
-				goto err_free_cpumask;
+				return -EBUSY;
 			}
 
 			spin_lock_irqsave(&cpufreq_driver_lock, flags);
@@ -893,17 +825,62 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 			 * Call driver->exit() because only the cpu parent of
 			 * the kobj needed to call init().
 			 */
-			goto out_driver_exit; /* call driver->exit() */
+			if (cpufreq_driver->exit)
+				cpufreq_driver->exit(policy);
+
+			if (!ret)
+				return 1;
+			else
+				return ret;
 		}
 	}
 #endif
-	memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
+	return ret;
+}
+
+
+/* symlink affected CPUs */
+int cpufreq_add_dev_symlink(unsigned int cpu, struct cpufreq_policy *policy)
+{
+	unsigned int j;
+	int ret = 0;
+
+	for_each_cpu(j, policy->cpus) {
+		struct cpufreq_policy *managed_policy;
+		struct sys_device *cpu_sys_dev;
+
+		if (j == cpu)
+			continue;
+		if (!cpu_online(j))
+			continue;
+
+		dprintk("CPU %u already managed, adding link\n", j);
+		managed_policy = cpufreq_cpu_get(cpu);
+		cpu_sys_dev = get_cpu_sysdev(j);
+		ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
+					"cpufreq");
+		if (ret) {
+			cpufreq_cpu_put(managed_policy);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+int cpufreq_add_dev_interface(unsigned int cpu, struct cpufreq_policy *policy,
+		struct sys_device *sys_dev)
+{
+	struct cpufreq_policy new_policy;
+	struct freq_attr **drv_attr;
+	unsigned long flags;
+	int ret = 0;
+	unsigned int j;
 
 	/* prepare interface data */
-	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
-				   "cpufreq");
+	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
+				   &sys_dev->kobj, "cpufreq");
 	if (ret)
-		goto out_driver_exit;
+		return ret;
 
 	/* set up files for this cpu device */
 	drv_attr = cpufreq_driver->attr;
@@ -926,35 +903,20 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
 	for_each_cpu(j, policy->cpus) {
-		if (!cpu_online(j))
-			continue;
+	if (!cpu_online(j))
+		continue;
 		per_cpu(cpufreq_cpu_data, j) = policy;
 		per_cpu(policy_cpu, j) = policy->cpu;
 	}
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
-	/* symlink affected CPUs */
-	for_each_cpu(j, policy->cpus) {
-		struct cpufreq_policy *managed_policy;
-
-		if (j == cpu)
-			continue;
-		if (!cpu_online(j))
-			continue;
-
-		dprintk("CPU %u already managed, adding link\n", j);
-		managed_policy = cpufreq_cpu_get(cpu);
-		cpu_sys_dev = get_cpu_sysdev(j);
-		ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
-					"cpufreq");
-		if (ret) {
-			cpufreq_cpu_put(managed_policy);
-			goto err_out_unregister;
-		}
-	}
+	ret = cpufreq_add_dev_symlink(cpu, policy);
+	if (ret)
+		goto err_out_kobj_put;
 
-	policy->governor = NULL; /* to assure that the starting sequence is
-				  * run in cpufreq_set_policy */
+	memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
+	/* assure that the starting sequence is run in __cpufreq_set_policy */
+	policy->governor = NULL;
 
 	/* set default policy */
 	ret = __cpufreq_set_policy(policy, &new_policy);
@@ -963,8 +925,107 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 
 	if (ret) {
 		dprintk("setting policy failed\n");
-		goto err_out_unregister;
+		if (cpufreq_driver->exit)
+			cpufreq_driver->exit(policy);
+	}
+	return ret;
+
+err_out_kobj_put:
+	kobject_put(&policy->kobj);
+	wait_for_completion(&policy->kobj_unregister);
+	return ret;
+}
+
+
+/**
+ * cpufreq_add_dev - add a CPU device
+ *
+ * Adds the cpufreq interface for a CPU device.
+ *
+ * The Oracle says: try running cpufreq registration/unregistration concurrently
+ * with with cpu hotplugging and all hell will break loose. Tried to clean this
+ * mess up, but more thorough testing is needed. - Mathieu
+ */
+static int cpufreq_add_dev(struct sys_device *sys_dev)
+{
+	unsigned int cpu = sys_dev->id;
+	int ret = 0;
+	struct cpufreq_policy *policy;
+	unsigned long flags;
+	unsigned int j;
+
+	if (cpu_is_offline(cpu))
+		return 0;
+
+	cpufreq_debug_disable_ratelimit();
+	dprintk("adding CPU %u\n", cpu);
+
+#ifdef CONFIG_SMP
+	/* check whether a different CPU already registered this
+	 * CPU because it is in the same boat. */
+	policy = cpufreq_cpu_get(cpu);
+	if (unlikely(policy)) {
+		cpufreq_cpu_put(policy);
+		cpufreq_debug_enable_ratelimit();
+		return 0;
+	}
+#endif
+
+	if (!try_module_get(cpufreq_driver->owner)) {
+		ret = -EINVAL;
+		goto module_out;
+	}
+
+	ret = -ENOMEM;
+	policy = kzalloc(sizeof(struct cpufreq_policy), GFP_KERNEL);
+	if (!policy)
+		goto nomem_out;
+
+	if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL))
+		goto err_free_policy;
+
+	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL))
+		goto err_free_cpumask;
+
+	policy->cpu = cpu;
+	cpumask_copy(policy->cpus, cpumask_of(cpu));
+
+	/* Initially set CPU itself as the policy_cpu */
+	per_cpu(policy_cpu, cpu) = cpu;
+	ret = (lock_policy_rwsem_write(cpu) < 0);
+	WARN_ON(ret);
+
+	init_completion(&policy->kobj_unregister);
+	INIT_WORK(&policy->update, handle_update);
+
+	/* Set governor before ->init, so that driver could check it */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	/* call driver. From then on the cpufreq must be able
+	 * to accept all calls to ->verify and ->setpolicy for this CPU
+	 */
+	ret = cpufreq_driver->init(policy);
+	if (ret) {
+		dprintk("initialization failed\n");
+		goto err_unlock_policy;
 	}
+	policy->user_policy.min = policy->min;
+	policy->user_policy.max = policy->max;
+
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+				     CPUFREQ_START, policy);
+
+	ret = cpufreq_add_dev_policy(cpu, policy, sys_dev);
+	if (ret) {
+		if (ret > 0)
+			/* This is a managed cpu, symlink created,
+			   exit with 0 */
+			ret = 0;
+		goto err_unlock_policy;
+	}
+
+	ret = cpufreq_add_dev_interface(cpu, policy, sys_dev);
+	if (ret)
+		goto err_out_unregister;
 
 	unlock_policy_rwsem_write(cpu);
 
@@ -982,14 +1043,9 @@ err_out_unregister:
 		per_cpu(cpufreq_cpu_data, j) = NULL;
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
-err_out_kobj_put:
 	kobject_put(&policy->kobj);
 	wait_for_completion(&policy->kobj_unregister);
 
-out_driver_exit:
-	if (cpufreq_driver->exit)
-		cpufreq_driver->exit(policy);
-
 err_unlock_policy:
 	unlock_policy_rwsem_write(cpu);
 err_free_cpumask:
@@ -1653,8 +1709,17 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
 			dprintk("governor switch\n");
 
 			/* end old governor */
-			if (data->governor)
+			if (data->governor) {
+				/*
+				 * Need to release the rwsem around governor
+				 * stop due to lock dependency between
+				 * cancel_delayed_work_sync and the read lock
+				 * taken in the delayed work handler.
+				 */
+				unlock_policy_rwsem_write(data->cpu);
 				__cpufreq_governor(data, CPUFREQ_GOV_STOP);
+				lock_policy_rwsem_write(data->cpu);
+			}
 
 			/* start new governor */
 			data->governor = policy->governor;
@@ -1884,7 +1949,11 @@ static int __init cpufreq_core_init(void)
 		per_cpu(policy_cpu, cpu) = -1;
 		init_rwsem(&per_cpu(cpu_policy_rwsem, cpu));
 	}
+
+	cpufreq_global_kobject = kobject_create_and_add("cpufreq",
+						&cpu_sysdev_class.kset.kobj);
+	BUG_ON(!cpufreq_global_kobject);
+
 	return 0;
 }
-
 core_initcall(cpufreq_core_init);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index d7a528c80de8..071699de50ee 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -55,6 +55,18 @@ static unsigned int min_sampling_rate;
 #define TRANSITION_LATENCY_LIMIT		(10 * 1000 * 1000)
 
 static void do_dbs_timer(struct work_struct *work);
+static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
+				unsigned int event);
+
+#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
+static
+#endif
+struct cpufreq_governor cpufreq_gov_ondemand = {
+       .name                   = "ondemand",
+       .governor               = cpufreq_governor_dbs,
+       .max_transition_latency = TRANSITION_LATENCY_LIMIT,
+       .owner                  = THIS_MODULE,
+};
 
 /* Sampling types */
 enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
@@ -207,20 +219,23 @@ static void ondemand_powersave_bias_init(void)
 }
 
 /************************** sysfs interface ************************/
-static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
+
+static ssize_t show_sampling_rate_max(struct kobject *kobj,
+				      struct attribute *attr, char *buf)
 {
 	printk_once(KERN_INFO "CPUFREQ: ondemand sampling_rate_max "
 	       "sysfs file is deprecated - used by: %s\n", current->comm);
 	return sprintf(buf, "%u\n", -1U);
 }
 
-static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf)
+static ssize_t show_sampling_rate_min(struct kobject *kobj,
+				      struct attribute *attr, char *buf)
 {
 	return sprintf(buf, "%u\n", min_sampling_rate);
 }
 
 #define define_one_ro(_name)		\
-static struct freq_attr _name =		\
+static struct global_attr _name =	\
 __ATTR(_name, 0444, show_##_name, NULL)
 
 define_one_ro(sampling_rate_max);
@@ -229,7 +244,7 @@ define_one_ro(sampling_rate_min);
 /* cpufreq_ondemand Governor Tunables */
 #define show_one(file_name, object)					\
 static ssize_t show_##file_name						\
-(struct cpufreq_policy *unused, char *buf)				\
+(struct kobject *kobj, struct attribute *attr, char *buf)              \
 {									\
 	return sprintf(buf, "%u\n", dbs_tuners_ins.object);		\
 }
@@ -238,8 +253,38 @@ show_one(up_threshold, up_threshold);
 show_one(ignore_nice_load, ignore_nice);
 show_one(powersave_bias, powersave_bias);
 
-static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
-		const char *buf, size_t count)
+/*** delete after deprecation time ***/
+
+#define DEPRECATION_MSG(file_name)					\
+	printk_once(KERN_INFO "CPUFREQ: Per core ondemand sysfs "	\
+		    "interface is deprecated - " #file_name "\n");
+
+#define show_one_old(file_name)						\
+static ssize_t show_##file_name##_old					\
+(struct cpufreq_policy *unused, char *buf)				\
+{									\
+	printk_once(KERN_INFO "CPUFREQ: Per core ondemand sysfs "	\
+		    "interface is deprecated - " #file_name "\n");	\
+	return show_##file_name(NULL, NULL, buf);			\
+}
+show_one_old(sampling_rate);
+show_one_old(up_threshold);
+show_one_old(ignore_nice_load);
+show_one_old(powersave_bias);
+show_one_old(sampling_rate_min);
+show_one_old(sampling_rate_max);
+
+#define define_one_ro_old(object, _name)       \
+static struct freq_attr object =               \
+__ATTR(_name, 0444, show_##_name##_old, NULL)
+
+define_one_ro_old(sampling_rate_min_old, sampling_rate_min);
+define_one_ro_old(sampling_rate_max_old, sampling_rate_max);
+
+/*** delete after deprecation time ***/
+
+static ssize_t store_sampling_rate(struct kobject *a, struct attribute *b,
+				   const char *buf, size_t count)
 {
 	unsigned int input;
 	int ret;
@@ -254,8 +299,8 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
 	return count;
 }
 
-static ssize_t store_up_threshold(struct cpufreq_policy *unused,
-		const char *buf, size_t count)
+static ssize_t store_up_threshold(struct kobject *a, struct attribute *b,
+				  const char *buf, size_t count)
 {
 	unsigned int input;
 	int ret;
@@ -273,8 +318,8 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused,
 	return count;
 }
 
-static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy,
-		const char *buf, size_t count)
+static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b,
+				      const char *buf, size_t count)
 {
 	unsigned int input;
 	int ret;
@@ -310,8 +355,8 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy,
 	return count;
 }
 
-static ssize_t store_powersave_bias(struct cpufreq_policy *unused,
-		const char *buf, size_t count)
+static ssize_t store_powersave_bias(struct kobject *a, struct attribute *b,
+				    const char *buf, size_t count)
 {
 	unsigned int input;
 	int ret;
@@ -332,7 +377,7 @@ static ssize_t store_powersave_bias(struct cpufreq_policy *unused,
 }
 
 #define define_one_rw(_name) \
-static struct freq_attr _name = \
+static struct global_attr _name = \
 __ATTR(_name, 0644, show_##_name, store_##_name)
 
 define_one_rw(sampling_rate);
@@ -355,6 +400,47 @@ static struct attribute_group dbs_attr_group = {
 	.name = "ondemand",
 };
 
+/*** delete after deprecation time ***/
+
+#define write_one_old(file_name)					\
+static ssize_t store_##file_name##_old					\
+(struct cpufreq_policy *unused, const char *buf, size_t count)		\
+{									\
+       printk_once(KERN_INFO "CPUFREQ: Per core ondemand sysfs "	\
+		   "interface is deprecated - " #file_name "\n");	\
+       return store_##file_name(NULL, NULL, buf, count);		\
+}
+write_one_old(sampling_rate);
+write_one_old(up_threshold);
+write_one_old(ignore_nice_load);
+write_one_old(powersave_bias);
+
+#define define_one_rw_old(object, _name)       \
+static struct freq_attr object =               \
+__ATTR(_name, 0644, show_##_name##_old, store_##_name##_old)
+
+define_one_rw_old(sampling_rate_old, sampling_rate);
+define_one_rw_old(up_threshold_old, up_threshold);
+define_one_rw_old(ignore_nice_load_old, ignore_nice_load);
+define_one_rw_old(powersave_bias_old, powersave_bias);
+
+static struct attribute *dbs_attributes_old[] = {
+       &sampling_rate_max_old.attr,
+       &sampling_rate_min_old.attr,
+       &sampling_rate_old.attr,
+       &up_threshold_old.attr,
+       &ignore_nice_load_old.attr,
+       &powersave_bias_old.attr,
+       NULL
+};
+
+static struct attribute_group dbs_attr_group_old = {
+       .attrs = dbs_attributes_old,
+       .name = "ondemand",
+};
+
+/*** delete after deprecation time ***/
+
 /************************** sysfs end ************************/
 
 static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
@@ -545,7 +631,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 
 		mutex_lock(&dbs_mutex);
 
-		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+		rc = sysfs_create_group(&policy->kobj, &dbs_attr_group_old);
 		if (rc) {
 			mutex_unlock(&dbs_mutex);
 			return rc;
@@ -566,13 +652,20 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		}
 		this_dbs_info->cpu = cpu;
 		ondemand_powersave_bias_init_cpu(cpu);
-		mutex_init(&this_dbs_info->timer_mutex);
 		/*
 		 * Start the timerschedule work, when this governor
 		 * is used for first time
 		 */
 		if (dbs_enable == 1) {
 			unsigned int latency;
+
+			rc = sysfs_create_group(cpufreq_global_kobject,
+						&dbs_attr_group);
+			if (rc) {
+				mutex_unlock(&dbs_mutex);
+				return rc;
+			}
+
 			/* policy latency is in nS. Convert it to uS first */
 			latency = policy->cpuinfo.transition_latency / 1000;
 			if (latency == 0)
@@ -586,6 +679,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		}
 		mutex_unlock(&dbs_mutex);
 
+		mutex_init(&this_dbs_info->timer_mutex);
 		dbs_timer_init(this_dbs_info);
 		break;
 
@@ -593,10 +687,13 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 		dbs_timer_exit(this_dbs_info);
 
 		mutex_lock(&dbs_mutex);
-		sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+		sysfs_remove_group(&policy->kobj, &dbs_attr_group_old);
 		mutex_destroy(&this_dbs_info->timer_mutex);
 		dbs_enable--;
 		mutex_unlock(&dbs_mutex);
+		if (!dbs_enable)
+			sysfs_remove_group(cpufreq_global_kobject,
+					   &dbs_attr_group);
 
 		break;
 
@@ -614,16 +711,6 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 	return 0;
 }
 
-#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
-static
-#endif
-struct cpufreq_governor cpufreq_gov_ondemand = {
-	.name			= "ondemand",
-	.governor		= cpufreq_governor_dbs,
-	.max_transition_latency = TRANSITION_LATENCY_LIMIT,
-	.owner			= THIS_MODULE,
-};
-
 static int __init cpufreq_gov_dbs_init(void)
 {
 	int err;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 4339b1a879cd..a3ca18e2d7cf 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -59,7 +59,7 @@ config EDAC_MM_EDAC
 
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
-	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI
+	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && CPU_SUP_AMD
 	help
 	  Support for error detection and correction on the AMD 64
 	  Families of Memory Controllers (K8, F10h and F11h)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 173dc4a84166..4e551e63b6dc 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1255,7 +1255,9 @@ static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
  */
 static int f10_early_channel_count(struct amd64_pvt *pvt)
 {
+	int dbams[] = { DBAM0, DBAM1 };
 	int err = 0, channels = 0;
+	int i, j;
 	u32 dbam;
 
 	err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
@@ -1288,46 +1290,19 @@ static int f10_early_channel_count(struct amd64_pvt *pvt)
 	 * is more than just one DIMM present in unganged mode. Need to check
 	 * both controllers since DIMMs can be placed in either one.
 	 */
-	channels = 0;
-	err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &dbam);
-	if (err)
-		goto err_reg;
-
-	if (DBAM_DIMM(0, dbam) > 0)
-		channels++;
-	if (DBAM_DIMM(1, dbam) > 0)
-		channels++;
-	if (DBAM_DIMM(2, dbam) > 0)
-		channels++;
-	if (DBAM_DIMM(3, dbam) > 0)
-		channels++;
-
-	/* If more than 2 DIMMs are present, then we have 2 channels */
-	if (channels > 2)
-		channels = 2;
-	else if (channels == 0) {
-		/* No DIMMs on DCT0, so look at DCT1 */
-		err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM1, &dbam);
+	for (i = 0; i < ARRAY_SIZE(dbams); i++) {
+		err = pci_read_config_dword(pvt->dram_f2_ctl, dbams[i], &dbam);
 		if (err)
 			goto err_reg;
 
-		if (DBAM_DIMM(0, dbam) > 0)
-			channels++;
-		if (DBAM_DIMM(1, dbam) > 0)
-			channels++;
-		if (DBAM_DIMM(2, dbam) > 0)
-			channels++;
-		if (DBAM_DIMM(3, dbam) > 0)
-			channels++;
-
-		if (channels > 2)
-			channels = 2;
+		for (j = 0; j < 4; j++) {
+			if (DBAM_DIMM(j, dbam) > 0) {
+				channels++;
+				break;
+			}
+		}
 	}
 
-	/* If we found ALL 0 values, then assume just ONE DIMM-ONE Channel */
-	if (channels == 0)
-		channels = 1;
-
 	debugf0("MCT channel count: %d\n", channels);
 
 	return channels;
@@ -2766,30 +2741,53 @@ static void amd64_restore_ecc_error_reporting(struct amd64_pvt *pvt)
 	wrmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs);
 }
 
-static void check_mcg_ctl(void *ret)
+/* get all cores on this DCT */
+static void get_cpus_on_this_dct_cpumask(cpumask_t *mask, int nid)
 {
-	u64 msr_val = 0;
-	u8 nbe;
-
-	rdmsrl(MSR_IA32_MCG_CTL, msr_val);
-	nbe = msr_val & K8_MSR_MCGCTL_NBE;
-
-	debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n",
-		raw_smp_processor_id(), msr_val,
-		(nbe ? "enabled" : "disabled"));
+	int cpu;
 
-	if (!nbe)
-		*(int *)ret = 0;
+	for_each_online_cpu(cpu)
+		if (amd_get_nb_id(cpu) == nid)
+			cpumask_set_cpu(cpu, mask);
 }
 
 /* check MCG_CTL on all the cpus on this node */
-static int amd64_mcg_ctl_enabled_on_cpus(const cpumask_t *mask)
+static bool amd64_nb_mce_bank_enabled_on_node(int nid)
 {
-	int ret = 1;
-	preempt_disable();
-	smp_call_function_many(mask, check_mcg_ctl, &ret, 1);
-	preempt_enable();
+	cpumask_t mask;
+	struct msr *msrs;
+	int cpu, nbe, idx = 0;
+	bool ret = false;
 
+	cpumask_clear(&mask);
+
+	get_cpus_on_this_dct_cpumask(&mask, nid);
+
+	msrs = kzalloc(sizeof(struct msr) * cpumask_weight(&mask), GFP_KERNEL);
+	if (!msrs) {
+		amd64_printk(KERN_WARNING, "%s: error allocating msrs\n",
+			      __func__);
+		 return false;
+	}
+
+	rdmsr_on_cpus(&mask, MSR_IA32_MCG_CTL, msrs);
+
+	for_each_cpu(cpu, &mask) {
+		nbe = msrs[idx].l & K8_MSR_MCGCTL_NBE;
+
+		debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n",
+			cpu, msrs[idx].q,
+			(nbe ? "enabled" : "disabled"));
+
+		if (!nbe)
+			goto out;
+
+		idx++;
+	}
+	ret = true;
+
+out:
+	kfree(msrs);
 	return ret;
 }
 
@@ -2799,71 +2797,46 @@ static int amd64_mcg_ctl_enabled_on_cpus(const cpumask_t *mask)
  * the memory system completely. A command line option allows to force-enable
  * hardware ECC later in amd64_enable_ecc_error_reporting().
  */
+static const char *ecc_warning =
+	"WARNING: ECC is disabled by BIOS. Module will NOT be loaded.\n"
+	" Either Enable ECC in the BIOS, or set 'ecc_enable_override'.\n"
+	" Also, use of the override can cause unknown side effects.\n";
+
 static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
 {
 	u32 value;
-	int err = 0, ret = 0;
+	int err = 0;
 	u8 ecc_enabled = 0;
+	bool nb_mce_en = false;
 
 	err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value);
 	if (err)
 		debugf0("Reading K8_NBCTL failed\n");
 
 	ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE);
+	if (!ecc_enabled)
+		amd64_printk(KERN_WARNING, "This node reports that Memory ECC "
+			     "is currently disabled, set F3x%x[22] (%s).\n",
+			     K8_NBCFG, pci_name(pvt->misc_f3_ctl));
+	else
+		amd64_printk(KERN_INFO, "ECC is enabled by BIOS.\n");
 
-	ret = amd64_mcg_ctl_enabled_on_cpus(cpumask_of_node(pvt->mc_node_id));
-
-	debugf0("K8_NBCFG=0x%x,  DRAM ECC is %s\n", value,
-			(value & K8_NBCFG_ECC_ENABLE ? "enabled" : "disabled"));
-
-	if (!ecc_enabled || !ret) {
-		if (!ecc_enabled) {
-			amd64_printk(KERN_WARNING, "This node reports that "
-						   "Memory ECC is currently "
-						   "disabled.\n");
+	nb_mce_en = amd64_nb_mce_bank_enabled_on_node(pvt->mc_node_id);
+	if (!nb_mce_en)
+		amd64_printk(KERN_WARNING, "NB MCE bank disabled, set MSR "
+			     "0x%08x[4] on node %d to enable.\n",
+			     MSR_IA32_MCG_CTL, pvt->mc_node_id);
 
-			amd64_printk(KERN_WARNING, "bit 0x%lx in register "
-				"F3x%x of the MISC_CONTROL device (%s) "
-				"should be enabled\n", K8_NBCFG_ECC_ENABLE,
-				K8_NBCFG, pci_name(pvt->misc_f3_ctl));
-		}
-		if (!ret) {
-			amd64_printk(KERN_WARNING, "bit 0x%016lx in MSR 0x%08x "
-					"of node %d should be enabled\n",
-					K8_MSR_MCGCTL_NBE, MSR_IA32_MCG_CTL,
-					pvt->mc_node_id);
-		}
+	if (!ecc_enabled || !nb_mce_en) {
 		if (!ecc_enable_override) {
-			amd64_printk(KERN_WARNING, "WARNING: ECC is NOT "
-				"currently enabled by the BIOS. Module "
-				"will NOT be loaded.\n"
-				"    Either Enable ECC in the BIOS, "
-				"or use the 'ecc_enable_override' "
-				"parameter.\n"
-				"    Might be a BIOS bug, if BIOS says "
-				"ECC is enabled\n"
-				"    Use of the override can cause "
-				"unknown side effects.\n");
-			ret = -ENODEV;
-		} else
-			/*
-			 * enable further driver loading if ECC enable is
-			 * overridden.
-			 */
-			ret = 0;
-	} else {
-		amd64_printk(KERN_INFO,
-			"ECC is enabled by BIOS, Proceeding "
-			"with EDAC module initialization\n");
-
-		/* Signal good ECC status */
-		ret = 0;
-
+			amd64_printk(KERN_WARNING, "%s", ecc_warning);
+			return -ENODEV;
+		}
+	} else
 		/* CLEAR the override, since BIOS controlled it */
 		ecc_enable_override = 0;
-	}
 
-	return ret;
+	return 0;
 }
 
 struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) +
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index c8ca7136dacc..0c21c370c9dd 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -405,7 +405,7 @@ void decode_mce(struct mce *m)
 		regs.nbsh  = (u32)(m->status >> 32);
 		regs.nbeal = (u32) m->addr;
 		regs.nbeah = (u32)(m->addr >> 32);
-		node       = per_cpu(cpu_llc_id, m->extcpu);
+		node       = amd_get_nb_id(m->extcpu);
 
 		amd_decode_nb_mce(node, &regs, 1);
 		break;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 96dda81c9228..6b4c484a699a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -155,6 +155,13 @@ config GPIO_TWL4030
 	  Say yes here to access the GPIO signals of various multi-function
 	  power management chips from Texas Instruments.
 
+config GPIO_WM831X
+	tristate "WM831x GPIOs"
+	depends on MFD_WM831X
+	help
+	  Say yes here to access the GPIO signals of WM831x power management
+	  chips from Wolfson Microelectronics.
+
 comment "PCI GPIO expanders:"
 
 config GPIO_BT8XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9244c6fcd8be..ea7c745f26a8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
 obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+obj-$(CONFIG_GPIO_WM831X)	+= wm831x-gpio.o
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
new file mode 100644
index 000000000000..f9c09a54ec7f
--- /dev/null
+++ b/drivers/gpio/wm831x-gpio.c
@@ -0,0 +1,252 @@
+/*
+ * wm831x-gpio.c  --  gpiolib support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#define WM831X_GPIO_MAX 16
+
+struct wm831x_gpio {
+	struct wm831x *wm831x;
+	struct gpio_chip gpio_chip;
+};
+
+static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct wm831x_gpio, gpio_chip);
+}
+
+static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+			       WM831X_GPN_DIR | WM831X_GPN_TRI,
+			       WM831X_GPN_DIR);
+}
+
+static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+	if (ret < 0)
+		return ret;
+
+	if (ret & 1 << offset)
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+			       WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
+}
+
+static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
+			value << offset);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		int gpio = i + chip->base;
+		int reg;
+		const char *label, *pull, *powerdomain;
+
+		/* We report the GPIO even if it's not requested since
+		 * we're also reporting things like alternate
+		 * functions which apply even when the GPIO is not in
+		 * use as a GPIO.
+		 */
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			label = "Unrequested";
+
+		seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
+
+		reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
+		if (reg < 0) {
+			dev_err(wm831x->dev,
+				"GPIO control %d read failed: %d\n",
+				gpio, reg);
+			seq_printf(s, "\n");
+			continue;
+		}
+
+		switch (reg & WM831X_GPN_PULL_MASK) {
+		case WM831X_GPIO_PULL_NONE:
+			pull = "nopull";
+			break;
+		case WM831X_GPIO_PULL_DOWN:
+			pull = "pulldown";
+			break;
+		case WM831X_GPIO_PULL_UP:
+			pull = "pullup";
+		default:
+			pull = "INVALID PULL";
+			break;
+		}
+
+		switch (i + 1) {
+		case 1 ... 3:
+		case 7 ... 9:
+			if (reg & WM831X_GPN_PWR_DOM)
+				powerdomain = "VPMIC";
+			else
+				powerdomain = "DBVDD";
+			break;
+
+		case 4 ... 6:
+		case 10 ... 12:
+			if (reg & WM831X_GPN_PWR_DOM)
+				powerdomain = "SYSVDD";
+			else
+				powerdomain = "DBVDD";
+			break;
+
+		case 13 ... 16:
+			powerdomain = "TPVDD";
+			break;
+
+		default:
+			BUG();
+			break;
+		}
+
+		seq_printf(s, " %s %s %s %s%s\n"
+			   "                                  %s%s (0x%4x)\n",
+			   reg & WM831X_GPN_DIR ? "in" : "out",
+			   wm831x_gpio_get(chip, i) ? "high" : "low",
+			   pull,
+			   powerdomain,
+			   reg & WM831X_GPN_POL ? " inverted" : "",
+			   reg & WM831X_GPN_OD ? "open-drain" : "CMOS",
+			   reg & WM831X_GPN_TRI ? " tristated" : "",
+			   reg);
+	}
+}
+#else
+#define wm831x_gpio_dbg_show NULL
+#endif
+
+static struct gpio_chip template_chip = {
+	.label			= "wm831x",
+	.owner			= THIS_MODULE,
+	.direction_input	= wm831x_gpio_direction_in,
+	.get			= wm831x_gpio_get,
+	.direction_output	= wm831x_gpio_direction_out,
+	.set			= wm831x_gpio_set,
+	.dbg_show		= wm831x_gpio_dbg_show,
+	.can_sleep		= 1,
+};
+
+static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	struct wm831x_gpio *wm831x_gpio;
+	int ret;
+
+	wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL);
+	if (wm831x_gpio == NULL)
+		return -ENOMEM;
+
+	wm831x_gpio->wm831x = wm831x;
+	wm831x_gpio->gpio_chip = template_chip;
+	wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
+	wm831x_gpio->gpio_chip.dev = &pdev->dev;
+	if (pdata && pdata->gpio_base)
+		wm831x_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		wm831x_gpio->gpio_chip.base = -1;
+
+	ret = gpiochip_add(&wm831x_gpio->gpio_chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+			ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, wm831x_gpio);
+
+	return ret;
+
+err:
+	kfree(wm831x_gpio);
+	return ret;
+}
+
+static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
+{
+	struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = gpiochip_remove(&wm831x_gpio->gpio_chip);
+	if (ret == 0)
+		kfree(wm831x_gpio);
+
+	return ret;
+}
+
+static struct platform_driver wm831x_gpio_driver = {
+	.driver.name	= "wm831x-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= wm831x_gpio_probe,
+	.remove		= __devexit_p(wm831x_gpio_remove),
+};
+
+static int __init wm831x_gpio_init(void)
+{
+	return platform_driver_register(&wm831x_gpio_driver);
+}
+subsys_initcall(wm831x_gpio_init);
+
+static void __exit wm831x_gpio_exit(void)
+{
+	platform_driver_unregister(&wm831x_gpio_driver);
+}
+module_exit(wm831x_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-gpio");
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2e25b7a827d3..ed7711d11ae8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -28,6 +28,17 @@ config HWMON_VID
 	tristate
 	default n
 
+config HWMON_DEBUG_CHIP
+	bool "Hardware Monitoring Chip debugging messages"
+	default n
+	help
+	  Say Y here if you want the I2C chip drivers to produce a bunch of
+	  debug messages to the system log.  Select this if you are having
+	  a problem with I2C support and want to see more of what is going
+	  on.
+
+comment "Native drivers"
+
 config SENSORS_ABITUGURU
 	tristate "Abit uGuru (rev 1 & 2)"
 	depends on X86 && EXPERIMENTAL
@@ -248,18 +259,6 @@ config SENSORS_ASB100
 	  This driver can also be built as a module.  If so, the module
 	  will be called asb100.
 
-config SENSORS_ATK0110
-	tristate "ASUS ATK0110 ACPI hwmon"
-	depends on X86 && ACPI && EXPERIMENTAL
-	help
-	  If you say yes here you get support for the ACPI hardware
-	  monitoring interface found in many ASUS motherboards. This
-	  driver will provide readings of fans, voltages and temperatures
-	  through the system firmware.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called asus_atk0110.
-
 config SENSORS_ATXP1
 	tristate "Attansic ATXP1 VID controller"
 	depends on I2C && EXPERIMENTAL
@@ -814,6 +813,16 @@ config SENSORS_TMP401
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp401.
 
+config SENSORS_TMP421
+	tristate "Texas Instruments TMP421 and compatible"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Texas Instruments TMP421,
+	  TMP422 and TMP423 temperature sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tmp421.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on PCI
@@ -937,6 +946,27 @@ config SENSORS_W83627EHF
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83627ehf.
 
+config SENSORS_WM831X
+	tristate "WM831x PMICs"
+	depends on MFD_WM831X
+	help
+	  If you say yes here you get support for the hardware
+	  monitoring functionality of the Wolfson Microelectronics
+	  WM831x series of PMICs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called wm831x-hwmon.
+
+config SENSORS_WM8350
+	tristate "Wolfson Microelectronics WM835x"
+	depends on MFD_WM8350
+	help
+	  If you say yes here you get support for the hardware
+	  monitoring features of the WM835x series of PMICs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called wm8350-hwmon.
+
 config SENSORS_ULTRA45
 	tristate "Sun Ultra45 PIC16F747"
 	depends on SPARC64
@@ -964,34 +994,6 @@ config SENSORS_HDAPS
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of hdaps.
 
-config SENSORS_LIS3LV02D
-	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
-	depends on ACPI && INPUT
-	select INPUT_POLLDEV
-	select NEW_LEDS
-	select LEDS_CLASS
-	default n
-	help
-	  This driver provides support for the LIS3LV02Dx accelerometer. In
-	  particular, it can be found in a number of HP laptops, which have the
-	  "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
-	  systems the driver should load automatically (via ACPI). The
-	  accelerometer might also be found in other systems, connected via SPI
-	  or I2C.  The accelerometer data is readable via
-	  /sys/devices/platform/lis3lv02d.
-
-	  This driver also provides an absolute input class device, allowing
-	  the laptop to act as a pinball machine-esque joystick. On HP laptops,
-	  if the led infrastructure is activated, support for a led indicating
-	  disk protection will be provided as hp:red:hddprotection.
-
-	  This driver can also be built as modules.  If so, the core module
-	  will be called lis3lv02d and a specific module for HP laptops will be
-	  called hp_accel.
-
-	  Say Y here if you have an applicable laptop and want to experience
-	  the awesome power of lis3lv02d.
-
 config SENSORS_LIS3_SPI
 	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
 	depends on !ACPI && SPI_MASTER && INPUT
@@ -1034,13 +1036,50 @@ config SENSORS_APPLESMC
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of applesmc.
 
-config HWMON_DEBUG_CHIP
-	bool "Hardware Monitoring Chip debugging messages"
+if ACPI
+
+comment "ACPI drivers"
+
+config SENSORS_ATK0110
+	tristate "ASUS ATK0110"
+	depends on X86 && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the ACPI hardware
+	  monitoring interface found in many ASUS motherboards. This
+	  driver will provide readings of fans, voltages and temperatures
+	  through the system firmware.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called asus_atk0110.
+
+config SENSORS_LIS3LV02D
+	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+	depends on INPUT
+	select INPUT_POLLDEV
+	select NEW_LEDS
+	select LEDS_CLASS
 	default n
 	help
-	  Say Y here if you want the I2C chip drivers to produce a bunch of
-	  debug messages to the system log.  Select this if you are having
-	  a problem with I2C support and want to see more of what is going
-	  on.
+	  This driver provides support for the LIS3LV02Dx accelerometer. In
+	  particular, it can be found in a number of HP laptops, which have the
+	  "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+	  systems the driver should load automatically (via ACPI). The
+	  accelerometer might also be found in other systems, connected via SPI
+	  or I2C.  The accelerometer data is readable via
+	  /sys/devices/platform/lis3lv02d.
+
+	  This driver also provides an absolute input class device, allowing
+	  the laptop to act as a pinball machine-esque joystick. On HP laptops,
+	  if the led infrastructure is activated, support for a led indicating
+	  disk protection will be provided as hp:red:hddprotection.
+
+	  This driver can also be built as modules.  If so, the core module
+	  will be called lis3lv02d and a specific module for HP laptops will be
+	  called hp_accel.
+
+	  Say Y here if you have an applicable laptop and want to experience
+	  the awesome power of lis3lv02d.
+
+endif # ACPI
 
 endif # HWMON
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 7f239a247c33..bcf73a9bb619 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -5,6 +5,10 @@
 obj-$(CONFIG_HWMON)		+= hwmon.o
 obj-$(CONFIG_HWMON_VID)		+= hwmon-vid.o
 
+# APCI drivers
+obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
+
+# Native drivers
 # asb100, then w83781d go first, as they can override other drivers' addresses.
 obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
 obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
@@ -29,10 +33,8 @@ obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7473)	+= adt7473.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
-
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
-obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
@@ -84,12 +86,15 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
 obj-$(CONFIG_SENSORS_TMP401)	+= tmp401.o
+obj-$(CONFIG_SENSORS_TMP421)	+= tmp421.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
 obj-$(CONFIG_SENSORS_VT1211)	+= vt1211.o
 obj-$(CONFIG_SENSORS_VT8231)	+= vt8231.o
 obj-$(CONFIG_SENSORS_W83627EHF)	+= w83627ehf.o
 obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
 obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
+obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
+obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
 
 ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 4dbdb81ea3b1..03694cc17a32 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -32,7 +32,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/dmi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* Banks */
 #define ABIT_UGURU_ALARM_BANK			0x20 /* 1x 3 bytes */
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 7d3f15d32fdf..3cf28af614b5 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -34,7 +34,7 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/dmi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* uGuru3 bank addresses */
 #define ABIT_UGURU3_SETTINGS_BANK		0x01
@@ -117,9 +117,12 @@ struct abituguru3_sensor_info {
 	int offset;
 };
 
+/* Avoid use of flexible array members */
+#define ABIT_UGURU3_MAX_DMI_NAMES 2
+
 struct abituguru3_motherboard_info {
 	u16 id;
-	const char *dmi_name;
+	const char *dmi_name[ABIT_UGURU3_MAX_DMI_NAMES + 1];
 	/* + 1 -> end of sensors indicated by a sensor with name == NULL */
 	struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
 };
@@ -164,7 +167,7 @@ struct abituguru3_data {
 
 /* Constants */
 static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
-	{ 0x000C, NULL /* Unknown, need DMI string */, {
+	{ 0x000C, { NULL } /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -186,7 +189,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		35, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000D, NULL /* Abit AW8, need DMI string */, {
+	{ 0x000D, { NULL } /* Abit AW8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -215,7 +218,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000E, NULL /* AL-8, need DMI string */, {
+	{ 0x000E, { NULL } /* AL-8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -236,7 +239,8 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000F, NULL /* Unknown, need DMI string */, {
+	{ 0x000F, { NULL } /* Unknown, need DMI string */, {
+
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -257,7 +261,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, {
+	{ 0x0010, { NULL } /* Abit NI8 SLI GR, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -279,7 +283,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0011, "AT8 32X", {
+	{ 0x0011, { "AT8 32X", NULL }, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -306,7 +310,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
+	{ 0x0012, { NULL } /* Abit AN8 32X, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -328,7 +332,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0013, NULL /* Abit AW8D, need DMI string */, {
+	{ 0x0013, { NULL } /* Abit AW8D, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -357,7 +361,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0014, "AB9", /* + AB9 Pro */ {
+	{ 0x0014, { "AB9", "AB9 Pro", NULL }, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -378,7 +382,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0015, NULL /* Unknown, need DMI string */, {
+	{ 0x0015, { NULL } /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -402,7 +406,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, "AW9D-MAX", {
+	{ 0x0016, { "AW9D-MAX", NULL }, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -430,7 +434,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		38, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0017, NULL /* Unknown, need DMI string */, {
+	{ 0x0017, { NULL } /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -455,7 +459,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0018, "AB9 QuadGT", {
+	{ 0x0018, { "AB9 QuadGT", NULL }, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -482,7 +486,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0019, "IN9 32X MAX", {
+	{ 0x0019, { "IN9 32X MAX", NULL }, {
 		{ "CPU Core",		 7, 0, 10, 1, 0 },
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
@@ -509,7 +513,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001A, "IP35 Pro", {
+	{ 0x001A, { "IP35 Pro", "IP35 Pro XE", NULL }, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -537,7 +541,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX4 Fan",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001B, NULL /* Unknown, need DMI string */, {
+	{ 0x001B, { NULL } /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR3",		 1, 0, 20, 1, 0 },
 		{ "DDR3 VTT",		 2, 0, 10, 1, 0 },
@@ -564,7 +568,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001C, "IX38 QuadGT", {
+	{ 0x001C, { "IX38 QuadGT", NULL }, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -591,7 +595,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0000, NULL, { { NULL, 0, 0, 0, 0, 0 } } }
+	{ 0x0000, { NULL }, { { NULL, 0, 0, 0, 0, 0 } } }
 };
 
 
@@ -946,15 +950,6 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 	printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
 		"ID: %04X\n", (unsigned int)id);
 
-#ifdef CONFIG_DMI
-	if (!abituguru3_motherboards[i].dmi_name) {
-		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
-			"not detected using DMI. Please send the output of "
-			"\"dmidecode\" to the abituguru3 maintainer "
-			"(see MAINTAINERS)\n");
-	}
-#endif
-
 	/* Fill the sysfs attr array */
 	sysfs_attr_i = 0;
 	sysfs_filename = data->sysfs_names;
@@ -1131,6 +1126,7 @@ static int __init abituguru3_dmi_detect(void)
 {
 	const char *board_vendor, *board_name;
 	int i, err = (force) ? 1 : -ENODEV;
+	const char *const *dmi_name;
 	size_t sublen;
 
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1151,17 +1147,17 @@ static int __init abituguru3_dmi_detect(void)
 		sublen--;
 
 	for (i = 0; abituguru3_motherboards[i].id; i++) {
-		const char *dmi_name = abituguru3_motherboards[i].dmi_name;
-		if (!dmi_name || strlen(dmi_name) != sublen)
-			continue;
-		if (!strncasecmp(board_name, dmi_name, sublen))
-			break;
+		dmi_name = abituguru3_motherboards[i].dmi_name;
+		for ( ; *dmi_name; dmi_name++) {
+			if (strlen(*dmi_name) != sublen)
+				continue;
+			if (!strncasecmp(board_name, *dmi_name, sublen))
+				return 0;
+		}
 	}
 
-	if (!abituguru3_motherboards[i].id)
-		return 1;
-
-	return 0;
+	/* No match found */
+	return 1;
 }
 
 #else /* !CONFIG_DMI */
@@ -1221,6 +1217,13 @@ static int __init abituguru3_init(void)
 		err = abituguru3_detect();
 		if (err)
 			return err;
+
+#ifdef CONFIG_DMI
+		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
+			"not detected using DMI. Please send the output of "
+			"\"dmidecode\" to the abituguru3 maintainer "
+			"(see MAINTAINERS)\n");
+#endif
 	}
 
 	err = platform_driver_register(&abituguru3_driver);
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 678e34b01e52..753b34885f9d 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 #include <linux/mutex.h>
 #include <linux/hwmon-sysfs.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/leds.h>
 #include <linux/hwmon.h>
 #include <linux/workqueue.h>
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 3df202a9ad72..9814d51b3af4 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -35,7 +35,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* ISA device, if found */
 static struct platform_device *pdev;
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 899876579253..525a00bd70b1 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -40,7 +40,7 @@
 #include <linux/sysfs.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index d3612a1f1981..be2d131e405c 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -35,8 +35,7 @@
 #include <linux/timer.h>
 #include <linux/dmi.h>
 #include <linux/jiffies.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define HDAPS_LOW_PORT		0x1600	/* first port used by hdaps */
 #define HDAPS_NR_PORTS		0x30	/* number of ports: 0x1600 - 0x162f */
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index bfc296145bba..bf0862a803c0 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -179,8 +179,14 @@ struct vrm_model {
 static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_AMD, 0x6, ANY, ANY, 90},		/* Athlon Duron etc */
 	{X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},		/* Athlon 64, Opteron */
-	{X86_VENDOR_AMD, 0xF, ANY, ANY, 25},		/* NPT family 0Fh */
+	/* In theory, all NPT family 0Fh processors have 6 VID pins and should
+	   thus use vrm 25, however in practice not all mainboards route the
+	   6th VID pin because it is never needed. So we use the 5 VID pin
+	   variant (vrm 24) for the models which exist today. */
+	{X86_VENDOR_AMD, 0xF, 0x7F, ANY, 24},		/* NPT family 0Fh */
+	{X86_VENDOR_AMD, 0xF, ANY, ANY, 25},		/* future fam. 0Fh */
 	{X86_VENDOR_AMD, 0x10, ANY, ANY, 25},		/* NPT family 10h */
+
 	{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},		/* Pentium M (130 nm) */
 	{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},		/* Tualatin */
 	{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},		/* Pentium M (90 nm) */
@@ -191,12 +197,14 @@ static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90},		/* P4 Willamette */
 	{X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90},		/* P4 Northwood */
 	{X86_VENDOR_INTEL, 0xF, ANY, ANY, 100},		/* Prescott and above assume VRD 10 */
+
 	{X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85},	/* Eden ESP/Ezra */
 	{X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85},	/* Ezra T */
 	{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85},	/* Nemiah */
 	{X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17},	/* C3-M, Eden-N */
 	{X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0},		/* No information */
 	{X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13},	/* C7, Esther */
+
 	{X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0}		/* stop here */
 };
 
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 9157247fed8e..ffeb2a10e1a7 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -50,7 +50,7 @@
 #include <linux/string.h>
 #include <linux/dmi.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define DRVNAME "it87"
 
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index a1787fdf5b9f..f7e70163e016 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -31,7 +31,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 /* ISA device, if found */
 static struct platform_device *pdev;
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index b251d8674b41..6c53d987de10 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -75,6 +75,8 @@ I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100,
 #define	LM85_VERSTEP_GENERIC2		0x70
 #define	LM85_VERSTEP_LM85C		0x60
 #define	LM85_VERSTEP_LM85B		0x62
+#define	LM85_VERSTEP_LM96000_1		0x68
+#define	LM85_VERSTEP_LM96000_2		0x69
 #define	LM85_VERSTEP_ADM1027		0x60
 #define	LM85_VERSTEP_ADT7463		0x62
 #define	LM85_VERSTEP_ADT7463C		0x6A
@@ -1133,6 +1135,26 @@ static void lm85_init_client(struct i2c_client *client)
 		dev_warn(&client->dev, "Device is not ready\n");
 }
 
+static int lm85_is_fake(struct i2c_client *client)
+{
+	/*
+	 * Differenciate between real LM96000 and Winbond WPCD377I. The latter
+	 * emulate the former except that it has no hardware monitoring function
+	 * so the readings are always 0.
+	 */
+	int i;
+	u8 in_temp, fan;
+
+	for (i = 0; i < 8; i++) {
+		in_temp = i2c_smbus_read_byte_data(client, 0x20 + i);
+		fan = i2c_smbus_read_byte_data(client, 0x28 + i);
+		if (in_temp != 0x00 || fan != 0xff)
+			return 0;
+	}
+
+	return 1;
+}
+
 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int lm85_detect(struct i2c_client *client, int kind,
 		       struct i2c_board_info *info)
@@ -1173,6 +1195,16 @@ static int lm85_detect(struct i2c_client *client, int kind,
 			case LM85_VERSTEP_LM85B:
 				kind = lm85b;
 				break;
+			case LM85_VERSTEP_LM96000_1:
+			case LM85_VERSTEP_LM96000_2:
+				/* Check for Winbond WPCD377I */
+				if (lm85_is_fake(client)) {
+					dev_dbg(&adapter->dev,
+						"Found Winbond WPCD377I, "
+						"ignoring\n");
+					return -ENODEV;
+				}
+				break;
 			}
 		} else if (company == LM85_COMPANY_ANALOG_DEV) {
 			switch (verstep) {
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index fb052fea3744..4a64b85d4ec9 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -44,7 +44,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static u8 devid;
 static struct platform_device *pdev;
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
index 3a8a0f7a7736..3170b26d2443 100644
--- a/drivers/hwmon/pc87427.c
+++ b/drivers/hwmon/pc87427.c
@@ -33,7 +33,7 @@
 #include <linux/sysfs.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
@@ -435,7 +435,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
 	/* This will need to be revisited when we add support for
 	   temperature and voltage monitoring. */
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) {
+	if (!request_region(res->start, resource_size(res), DRVNAME)) {
 		err = -EBUSY;
 		dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n",
 			(unsigned long)res->start, (unsigned long)res->end);
@@ -475,7 +475,7 @@ exit_remove_files:
 		sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
 	}
 exit_release_region:
-	release_region(res->start, res->end - res->start + 1);
+	release_region(res->start, resource_size(res));
 exit_kfree:
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
@@ -500,7 +500,7 @@ static int __devexit pc87427_remove(struct platform_device *pdev)
 	kfree(data);
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	release_region(res->start, res->end - res->start + 1);
+	release_region(res->start, resource_size(res));
 
 	return 0;
 }
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index aa2e8318f167..12f2e7086560 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -63,7 +63,7 @@
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 
 /* If force_addr is set to anything different from 0, we forcibly enable
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 6f6d52b4fb64..f46d936c12da 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -37,7 +37,7 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index ba75bfcf14ce..8ad50fdba00d 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -38,7 +38,7 @@
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
new file mode 100644
index 000000000000..20924343431b
--- /dev/null
+++ b/drivers/hwmon/tmp421.c
@@ -0,0 +1,347 @@
+/* tmp421.c
+ *
+ * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
+ * Preliminary support by:
+ * Melvin Rook, Raymond Ng
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Driver for the Texas Instruments TMP421 SMBus temperature sensor IC.
+ * Supported models: TMP421, TMP422, TMP423
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f,
+				       I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_3(tmp421, tmp422, tmp423);
+
+/* The TMP421 registers */
+#define TMP421_CONFIG_REG_1			0x09
+#define TMP421_CONVERSION_RATE_REG		0x0B
+#define TMP421_MANUFACTURER_ID_REG		0xFE
+#define TMP421_DEVICE_ID_REG			0xFF
+
+static const u8 TMP421_TEMP_MSB[4]		= { 0x00, 0x01, 0x02, 0x03 };
+static const u8 TMP421_TEMP_LSB[4]		= { 0x10, 0x11, 0x12, 0x13 };
+
+/* Flags */
+#define TMP421_CONFIG_SHUTDOWN			0x40
+#define TMP421_CONFIG_RANGE			0x04
+
+/* Manufacturer / Device ID's */
+#define TMP421_MANUFACTURER_ID			0x55
+#define TMP421_DEVICE_ID			0x21
+#define TMP422_DEVICE_ID			0x22
+#define TMP423_DEVICE_ID			0x23
+
+static const struct i2c_device_id tmp421_id[] = {
+	{ "tmp421", tmp421 },
+	{ "tmp422", tmp422 },
+	{ "tmp423", tmp423 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tmp421_id);
+
+struct tmp421_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	char valid;
+	unsigned long last_updated;
+	int kind;
+	u8 config;
+	s16 temp[4];
+};
+
+static int temp_from_s16(s16 reg)
+{
+	int temp = reg;
+
+	return (temp * 1000 + 128) / 256;
+}
+
+static int temp_from_u16(u16 reg)
+{
+	int temp = reg;
+
+	/* Add offset for extended temperature range. */
+	temp -= 64 * 256;
+
+	return (temp * 1000 + 128) / 256;
+}
+
+static struct tmp421_data *tmp421_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tmp421_data *data = i2c_get_clientdata(client);
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+		data->config = i2c_smbus_read_byte_data(client,
+			TMP421_CONFIG_REG_1);
+
+		for (i = 0; i <= data->kind; i++) {
+			data->temp[i] = i2c_smbus_read_byte_data(client,
+				TMP421_TEMP_MSB[i]) << 8;
+			data->temp[i] |= i2c_smbus_read_byte_data(client,
+				TMP421_TEMP_LSB[i]);
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+static ssize_t show_temp_value(struct device *dev,
+			       struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp421_data *data = tmp421_update_device(dev);
+	int temp;
+
+	mutex_lock(&data->update_lock);
+	if (data->config & TMP421_CONFIG_RANGE)
+		temp = temp_from_u16(data->temp[index]);
+	else
+		temp = temp_from_s16(data->temp[index]);
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t show_fault(struct device *dev,
+			  struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp421_data *data = tmp421_update_device(dev);
+
+	/*
+	 * The OPEN bit signals a fault. This is bit 0 of the temperature
+	 * register (low byte).
+	 */
+	if (data->temp[index] & 0x01)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
+				int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct tmp421_data *data = dev_get_drvdata(dev);
+	struct device_attribute *devattr;
+	unsigned int index;
+
+	devattr = container_of(a, struct device_attribute, attr);
+	index = to_sensor_dev_attr(devattr)->index;
+
+	if (data->kind > index)
+		return a->mode;
+
+	return 0;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3);
+
+static struct attribute *tmp421_attr[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	&sensor_dev_attr_temp4_input.dev_attr.attr,
+	&sensor_dev_attr_temp4_fault.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tmp421_group = {
+	.attrs = tmp421_attr,
+	.is_visible = tmp421_is_visible,
+};
+
+static int tmp421_init_client(struct i2c_client *client)
+{
+	int config, config_orig;
+
+	/* Set the conversion rate to 2 Hz */
+	i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05);
+
+	/* Start conversions (disable shutdown if necessary) */
+	config = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1);
+	if (config < 0) {
+		dev_err(&client->dev, "Could not read configuration"
+			 " register (%d)\n", config);
+		return -ENODEV;
+	}
+
+	config_orig = config;
+	config &= ~TMP421_CONFIG_SHUTDOWN;
+
+	if (config != config_orig) {
+		dev_info(&client->dev, "Enable monitoring chip\n");
+		i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config);
+	}
+
+	return 0;
+}
+
+static int tmp421_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	const char *names[] = { "TMP421", "TMP422", "TMP423" };
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	if (kind <= 0) {
+		u8 reg;
+
+		reg = i2c_smbus_read_byte_data(client,
+					       TMP421_MANUFACTURER_ID_REG);
+		if (reg != TMP421_MANUFACTURER_ID)
+			return -ENODEV;
+
+		reg = i2c_smbus_read_byte_data(client,
+					       TMP421_DEVICE_ID_REG);
+		switch (reg) {
+		case TMP421_DEVICE_ID:
+			kind = tmp421;
+			break;
+		case TMP422_DEVICE_ID:
+			kind = tmp422;
+			break;
+		case TMP423_DEVICE_ID:
+			kind = tmp423;
+			break;
+		default:
+			return -ENODEV;
+		}
+	}
+	strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE);
+	dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
+		 names[kind - 1], client->addr);
+
+	return 0;
+}
+
+static int tmp421_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct tmp421_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct tmp421_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+	data->kind = id->driver_data;
+
+	err = tmp421_init_client(client);
+	if (err)
+		goto exit_free;
+
+	err = sysfs_create_group(&client->dev.kobj, &tmp421_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		data->hwmon_dev = NULL;
+		goto exit_remove;
+	}
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &tmp421_group);
+
+exit_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+
+	return err;
+}
+
+static int tmp421_remove(struct i2c_client *client)
+{
+	struct tmp421_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &tmp421_group);
+
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+
+	return 0;
+}
+
+static struct i2c_driver tmp421_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "tmp421",
+	},
+	.probe = tmp421_probe,
+	.remove = tmp421_remove,
+	.id_table = tmp421_id,
+	.detect = tmp421_detect,
+	.address_data = &addr_data,
+};
+
+static int __init tmp421_init(void)
+{
+	return i2c_add_driver(&tmp421_driver);
+}
+
+static void __exit tmp421_exit(void)
+{
+	i2c_del_driver(&tmp421_driver);
+}
+
+MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>");
+MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor"
+		   " driver");
+MODULE_LICENSE("GPL");
+
+module_init(tmp421_init);
+module_exit(tmp421_exit);
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index a022aedcaacb..39e82a492f26 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -42,7 +42,7 @@
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 
 /* If force_addr is set to anything different from 0, we forcibly enable
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index 73f77a9b8b18..ae33bbb577c7 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -33,7 +33,7 @@
 #include <linux/mutex.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int uch_config = -1;
 module_param(uch_config, int, 0);
@@ -1136,7 +1136,7 @@ static int __devinit vt1211_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) {
+	if (!request_region(res->start, resource_size(res), DRVNAME)) {
 		err = -EBUSY;
 		dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
 			(unsigned long)res->start, (unsigned long)res->end);
@@ -1209,7 +1209,7 @@ EXIT_DEV_REMOVE:
 	dev_err(dev, "Sysfs interface creation failed (%d)\n", err);
 EXIT_DEV_REMOVE_SILENT:
 	vt1211_remove_sysfs(pdev);
-	release_region(res->start, res->end - res->start + 1);
+	release_region(res->start, resource_size(res));
 EXIT_KFREE:
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
@@ -1228,7 +1228,7 @@ static int __devexit vt1211_remove(struct platform_device *pdev)
 	kfree(data);
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	release_region(res->start, res->end - res->start + 1);
+	release_region(res->start, resource_size(res));
 
 	return 0;
 }
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 9982b45fbb14..470a1226ba2b 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -36,7 +36,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int force_addr;
 module_param(force_addr, int, 0);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 0e9746913d2b..bb5e78748783 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -51,7 +51,7 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include "lm75.h"
 
 enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg };
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 389150ba30d3..2be28ac4ede0 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -51,7 +51,7 @@
 #include <linux/mutex.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include "lm75.h"
 
 static struct platform_device *pdev;
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 0bdab959b736..d27ed1bac002 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -48,7 +48,7 @@
 #ifdef CONFIG_ISA
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #endif
 
 #include "lm75.h"
diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
new file mode 100644
index 000000000000..c16e9e74c356
--- /dev/null
+++ b/drivers/hwmon/wm831x-hwmon.c
@@ -0,0 +1,226 @@
+/*
+ * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
+ *                                hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+
+struct wm831x_hwmon {
+	struct wm831x *wm831x;
+	struct device *classdev;
+};
+
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "wm831x\n");
+}
+
+static const char *input_names[] = {
+	[WM831X_AUX_SYSVDD]    = "SYSVDD",
+	[WM831X_AUX_USB]       = "USB",
+	[WM831X_AUX_BKUP_BATT] = "Backup battery",
+	[WM831X_AUX_BATT]      = "Battery",
+	[WM831X_AUX_WALL]      = "WALL",
+	[WM831X_AUX_CHIP_TEMP] = "PMIC",
+	[WM831X_AUX_BATT_TEMP] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(attr)->index;
+	int ret;
+
+	ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
+}
+
+static ssize_t show_chip_temp(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(attr)->index;
+	int ret;
+
+	ret = wm831x_auxadc_read(hwmon->wm831x, channel);
+	if (ret < 0)
+		return ret;
+
+	/* Degrees celsius = (512.18-ret) / 1.0983 */
+	ret = 512180 - (ret * 1000);
+	ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	int channel = to_sensor_dev_attr(attr)->index;
+
+	return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM831X_VOLTAGE(id, name) \
+	static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
+				  NULL, name)
+
+#define WM831X_NAMED_VOLTAGE(id, name) \
+	WM831X_VOLTAGE(id, name); \
+	static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label,	\
+				  NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
+WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
+WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
+WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
+
+WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
+WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
+WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
+WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
+WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
+			  WM831X_AUX_CHIP_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+			  WM831X_AUX_CHIP_TEMP);
+/* Report as a voltage since conversion depends on external components
+ * and that's what the ABI wants. */
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL,
+			  WM831X_AUX_BATT_TEMP);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+			  WM831X_AUX_BATT_TEMP);
+
+static struct attribute *wm831x_attributes[] = {
+	&dev_attr_name.attr,
+
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_label.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_label.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in6_label.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in7_label.dev_attr.attr,
+	&sensor_dev_attr_in8_input.dev_attr.attr,
+	&sensor_dev_attr_in8_label.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_label.dev_attr.attr,
+
+	NULL
+};
+
+static const struct attribute_group wm831x_attr_group = {
+	.attrs	= wm831x_attributes,
+};
+
+static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_hwmon *hwmon;
+	int ret;
+
+	hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->wm831x = wm831x;
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
+	if (ret)
+		goto err;
+
+	hwmon->classdev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon->classdev)) {
+		ret = PTR_ERR(hwmon->classdev);
+		goto err_sysfs;
+	}
+
+	platform_set_drvdata(pdev, hwmon);
+
+	return 0;
+
+err_sysfs:
+	sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+err:
+	kfree(hwmon);
+	return ret;
+}
+
+static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
+{
+	struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(hwmon->classdev);
+	sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+	platform_set_drvdata(pdev, NULL);
+	kfree(hwmon);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_hwmon_driver = {
+	.probe = wm831x_hwmon_probe,
+	.remove = __devexit_p(wm831x_hwmon_remove),
+	.driver = {
+		.name = "wm831x-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init wm831x_hwmon_init(void)
+{
+	return platform_driver_register(&wm831x_hwmon_driver);
+}
+module_init(wm831x_hwmon_init);
+
+static void __exit wm831x_hwmon_exit(void)
+{
+	platform_driver_unregister(&wm831x_hwmon_driver);
+}
+module_exit(wm831x_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-hwmon");
diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c
new file mode 100644
index 000000000000..13290595ca86
--- /dev/null
+++ b/drivers/hwmon/wm8350-hwmon.c
@@ -0,0 +1,151 @@
+/*
+ * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC
+ *                                  hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/comparator.h>
+
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "wm8350\n");
+}
+
+static const char *input_names[] = {
+	[WM8350_AUXADC_USB]  = "USB",
+	[WM8350_AUXADC_LINE] = "Line",
+	[WM8350_AUXADC_BATT] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(attr)->index;
+	int val;
+
+	val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF;
+	val = DIV_ROUND_CLOSEST(val, 1000);
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	int channel = to_sensor_dev_attr(attr)->index;
+
+	return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM8350_NAMED_VOLTAGE(id, name) \
+	static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
+				  NULL, name);		\
+	static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label,	\
+				  NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB);
+WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT);
+WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE);
+
+static struct attribute *wm8350_attributes[] = {
+	&dev_attr_name.attr,
+
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_label.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_label.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_label.dev_attr.attr,
+
+	NULL,
+};
+
+static const struct attribute_group wm8350_attr_group = {
+	.attrs	= wm8350_attributes,
+};
+
+static int __devinit wm8350_hwmon_probe(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group);
+	if (ret)
+		goto err;
+
+	wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(wm8350->hwmon.classdev)) {
+		ret = PTR_ERR(wm8350->hwmon.classdev);
+		goto err_group;
+	}
+
+	return 0;
+
+err_group:
+	sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
+err:
+	return ret;
+}
+
+static int __devexit wm8350_hwmon_remove(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(wm8350->hwmon.classdev);
+	sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver wm8350_hwmon_driver = {
+	.probe = wm8350_hwmon_probe,
+	.remove = __devexit_p(wm8350_hwmon_remove),
+	.driver = {
+		.name = "wm8350-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init wm8350_hwmon_init(void)
+{
+	return platform_driver_register(&wm8350_hwmon_driver);
+}
+module_init(wm8350_hwmon_init);
+
+static void __exit wm8350_hwmon_exit(void)
+{
+	platform_driver_unregister(&wm8350_hwmon_driver);
+}
+module_exit(wm8350_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM8350 Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-hwmon");
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 820487d0d5c7..86a9d4e81472 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
+#include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -165,7 +166,8 @@ static void activate_ch(struct sh_mobile_i2c_data *pd)
 	u_int32_t denom;
 	u_int32_t tmp;
 
-	/* Make sure the clock is enabled */
+	/* Wake up device and enable clock */
+	pm_runtime_get_sync(pd->dev);
 	clk_enable(pd->clk);
 
 	/* Get clock rate after clock is enabled */
@@ -213,8 +215,9 @@ static void deactivate_ch(struct sh_mobile_i2c_data *pd)
 	/* Disable channel */
 	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
 
-	/* Disable clock */
+	/* Disable clock and mark device as idle */
 	clk_disable(pd->clk);
+	pm_runtime_put_sync(pd->dev);
 }
 
 static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
@@ -572,6 +575,19 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		goto err_irq;
 	}
 
+	/* Enable Runtime PM for this device.
+	 *
+	 * Also tell the Runtime PM core to ignore children
+	 * for this device since it is valid for us to suspend
+	 * this I2C master driver even though the slave devices
+	 * on the I2C bus may not be suspended.
+	 *
+	 * The state of the I2C hardware bus is unaffected by
+	 * the Runtime PM state.
+	 */
+	pm_suspend_ignore_children(&dev->dev, true);
+	pm_runtime_enable(&dev->dev);
+
 	/* setup the private data */
 	adap = &pd->adap;
 	i2c_set_adapdata(adap, pd);
@@ -614,14 +630,33 @@ static int sh_mobile_i2c_remove(struct platform_device *dev)
 	iounmap(pd->reg);
 	sh_mobile_i2c_hook_irqs(dev, 0);
 	clk_put(pd->clk);
+	pm_runtime_disable(&dev->dev);
 	kfree(pd);
 	return 0;
 }
 
+static int sh_mobile_i2c_runtime_nop(struct device *dev)
+{
+	/* Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * This driver re-initializes all registers after
+	 * pm_runtime_get_sync() anyway so there is no need
+	 * to save and restore registers here.
+	 */
+	return 0;
+}
+
+static struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
+	.runtime_suspend = sh_mobile_i2c_runtime_nop,
+	.runtime_resume = sh_mobile_i2c_runtime_nop,
+};
+
 static struct platform_driver sh_mobile_i2c_driver = {
 	.driver		= {
 		.name		= "i2c-sh_mobile",
 		.owner		= THIS_MODULE,
+		.pm		= &sh_mobile_i2c_dev_pm_ops,
 	},
 	.probe		= sh_mobile_i2c_probe,
 	.remove		= sh_mobile_i2c_remove,
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 87ec7b18ac69..bba85add35a3 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -116,7 +116,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 		}
 	} else
 		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	tasklet_schedule(&kp_tasklet);
 
@@ -143,20 +143,20 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 
 	} else {
 		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 		/* read the keypad status */
-		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 		for (col = 0; col < omap_kp->cols; col++) {
 			omap_writew(~(1 << col) & 0xff,
-				    OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+				    OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 
 			udelay(omap_kp->delay);
 
-			state[col] = ~omap_readw(OMAP_MPUIO_BASE +
+			state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
 						 OMAP_MPUIO_KBR_LATCH) & 0xff;
 		}
-		omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 		udelay(2);
 	}
 }
@@ -234,7 +234,7 @@ static void omap_kp_tasklet(unsigned long data)
 			for (i = 0; i < omap_kp_data->rows; i++)
 				enable_irq(gpio_to_irq(row_gpios[i]));
 		} else {
-			omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+			omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 			kp_cur_group = -1;
 		}
 	}
@@ -317,7 +317,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 
 	/* Disable the interrupt for the MPUIO keyboard */
 	if (!cpu_is_omap24xx())
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	keymap = pdata->keymap;
 
@@ -391,7 +391,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	}
 
 	if (pdata->dbounce)
-		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
+		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
 
 	/* scan current status and enable interrupt */
 	omap_kp_scan_keypad(omap_kp, keypad_state);
@@ -402,7 +402,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 					"omap-keypad", omap_kp) < 0)
 				goto err4;
 		}
-		omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 	} else {
 		for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
 			if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
@@ -449,7 +449,7 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
 			free_irq(gpio_to_irq(row_gpios[i]), 0);
 		}
 	} else {
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 		free_irq(omap_kp->irq, 0);
 	}
 
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 0714bf2c28fc..887af79b7bff 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -80,6 +80,9 @@ static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
 		iowrite16(KYCR2_IRQ_LEVEL | (keyin_set << 8),
 			  priv->iomem_base + KYCR2_OFFS);
 
+		if (pdata->kycr2_delay)
+			udelay(pdata->kycr2_delay);
+
 		keys ^= ~0;
 		keys &= (1 << (sh_keysc_mode[pdata->mode].keyin *
 			       sh_keysc_mode[pdata->mode].keyout)) - 1;
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index cbe21bc96b52..1a50be379cbc 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -279,4 +279,24 @@ config INPUT_BFIN_ROTARY
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin-rotary.
 
+config INPUT_WM831X_ON
+	tristate "WM831X ON pin"
+	depends on MFD_WM831X
+	help
+	  Support the ON pin of WM831X PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called wm831x_on.
+
+config INPUT_PCAP
+	tristate "Motorola EZX PCAP misc input events"
+	depends on EZX_PCAP
+	help
+	  Say Y here if you want to use Power key and Headphone button
+	  on Motorola EZX phones.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcap_keys.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 79c1e9a5ea31..bf4db626c313 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
@@ -26,4 +27,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
+
diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c
new file mode 100644
index 000000000000..7ea969347ca9
--- /dev/null
+++ b/drivers/input/misc/pcap_keys.c
@@ -0,0 +1,144 @@
+/*
+ *  Input driver for PCAP events:
+ *   * Power key
+ *   * Headphone button
+ *
+ *  Copyright (c) 2008,2009 Ilya Petrov <ilya.muromec@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_keys {
+	struct pcap_chip *pcap;
+	struct input_dev *input;
+};
+
+/* PCAP2 interrupts us on keypress */
+static irqreturn_t pcap_keys_handler(int irq, void *_pcap_keys)
+{
+	struct pcap_keys *pcap_keys = _pcap_keys;
+	int pirq = irq_to_pcap(pcap_keys->pcap, irq);
+	u32 pstat;
+
+	ezx_pcap_read(pcap_keys->pcap, PCAP_REG_PSTAT, &pstat);
+	pstat &= 1 << pirq;
+
+	switch (pirq) {
+	case PCAP_IRQ_ONOFF:
+		input_report_key(pcap_keys->input, KEY_POWER, !pstat);
+		break;
+	case PCAP_IRQ_MIC:
+		input_report_key(pcap_keys->input, KEY_HP, !pstat);
+		break;
+	}
+
+	input_sync(pcap_keys->input);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit pcap_keys_probe(struct platform_device *pdev)
+{
+	int err = -ENOMEM;
+	struct pcap_keys *pcap_keys;
+	struct input_dev *input_dev;
+
+	pcap_keys = kmalloc(sizeof(struct pcap_keys), GFP_KERNEL);
+	if (!pcap_keys)
+		return err;
+
+	pcap_keys->pcap = dev_get_drvdata(pdev->dev.parent);
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		goto fail;
+
+	pcap_keys->input = input_dev;
+
+	platform_set_drvdata(pdev, pcap_keys);
+	input_dev->name = pdev->name;
+	input_dev->phys = "pcap-keys/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(KEY_POWER, input_dev->keybit);
+	__set_bit(KEY_HP, input_dev->keybit);
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto fail_allocate;
+
+	err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF),
+			pcap_keys_handler, 0, "Power key", pcap_keys);
+	if (err)
+		goto fail_register;
+
+	err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC),
+			pcap_keys_handler, 0, "Headphone button", pcap_keys);
+	if (err)
+		goto fail_pwrkey;
+
+	return 0;
+
+fail_pwrkey:
+	free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
+fail_register:
+	input_unregister_device(input_dev);
+	goto fail;
+fail_allocate:
+	input_free_device(input_dev);
+fail:
+	kfree(pcap_keys);
+	return err;
+}
+
+static int __devexit pcap_keys_remove(struct platform_device *pdev)
+{
+	struct pcap_keys *pcap_keys = platform_get_drvdata(pdev);
+
+	free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
+	free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), pcap_keys);
+
+	input_unregister_device(pcap_keys->input);
+	kfree(pcap_keys);
+
+	return 0;
+}
+
+static struct platform_driver pcap_keys_device_driver = {
+	.probe		= pcap_keys_probe,
+	.remove		= __devexit_p(pcap_keys_remove),
+	.driver		= {
+		.name	= "pcap-keys",
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init pcap_keys_init(void)
+{
+	return platform_driver_register(&pcap_keys_device_driver);
+};
+
+static void __exit pcap_keys_exit(void)
+{
+	platform_driver_unregister(&pcap_keys_device_driver);
+};
+
+module_init(pcap_keys_init);
+module_exit(pcap_keys_exit);
+
+MODULE_DESCRIPTION("Motorola PCAP2 input events driver");
+MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_keys");
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
new file mode 100644
index 000000000000..ba4f5dd7c60e
--- /dev/null
+++ b/drivers/input/misc/wm831x-on.c
@@ -0,0 +1,163 @@
+/**
+ * wm831x-on.c - WM831X ON pin driver
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_on {
+	struct input_dev *dev;
+	struct delayed_work work;
+	struct wm831x *wm831x;
+};
+
+/*
+ * The chip gives us an interrupt when the ON pin is asserted but we
+ * then need to poll to see when the pin is deasserted.
+ */
+static void wm831x_poll_on(struct work_struct *work)
+{
+	struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on,
+						   work.work);
+	struct wm831x *wm831x = wm831x_on->wm831x;
+	int poll, ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL);
+	if (ret >= 0) {
+		poll = !(ret & WM831X_ON_PIN_STS);
+
+		input_report_key(wm831x_on->dev, KEY_POWER, poll);
+		input_sync(wm831x_on->dev);
+	} else {
+		dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret);
+		poll = 1;
+	}
+
+	if (poll)
+		schedule_delayed_work(&wm831x_on->work, 100);
+}
+
+static irqreturn_t wm831x_on_irq(int irq, void *data)
+{
+	struct wm831x_on *wm831x_on = data;
+
+	schedule_delayed_work(&wm831x_on->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit wm831x_on_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_on *wm831x_on;
+	int irq = platform_get_irq(pdev, 0);
+	int ret;
+
+	wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL);
+	if (!wm831x_on) {
+		dev_err(&pdev->dev, "Can't allocate data\n");
+		return -ENOMEM;
+	}
+
+	wm831x_on->wm831x = wm831x;
+	INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
+
+	wm831x_on->dev = input_allocate_device();
+	if (!wm831x_on->dev) {
+		dev_err(&pdev->dev, "Can't allocate input dev\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY);
+	wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+	wm831x_on->dev->name = "wm831x_on";
+	wm831x_on->dev->phys = "wm831x_on/input0";
+	wm831x_on->dev->dev.parent = &pdev->dev;
+
+	ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
+				 IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
+		goto err_input_dev;
+	}
+	ret = input_register_device(wm831x_on->dev);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret);
+		goto err_irq;
+	}
+
+	platform_set_drvdata(pdev, wm831x_on);
+
+	return 0;
+
+err_irq:
+	wm831x_free_irq(wm831x, irq, NULL);
+err_input_dev:
+	input_free_device(wm831x_on->dev);
+err:
+	kfree(wm831x_on);
+	return ret;
+}
+
+static int __devexit wm831x_on_remove(struct platform_device *pdev)
+{
+	struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+	cancel_delayed_work_sync(&wm831x_on->work);
+	input_unregister_device(wm831x_on->dev);
+	kfree(wm831x_on);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_on_driver = {
+	.probe		= wm831x_on_probe,
+	.remove		= __devexit_p(wm831x_on_remove),
+	.driver		= {
+		.name	= "wm831x-on",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init wm831x_on_init(void)
+{
+	return platform_driver_register(&wm831x_on_driver);
+}
+module_init(wm831x_on_init);
+
+static void __exit wm831x_on_exit(void)
+{
+	platform_driver_unregister(&wm831x_on_driver);
+}
+module_exit(wm831x_on_exit);
+
+MODULE_ALIAS("platform:wm831x-on");
+MODULE_DESCRIPTION("WM831x ON pin");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 87a1ae63bcc4..ab02d72afbf3 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -510,4 +510,13 @@ config TOUCHSCREEN_W90X900
 	  To compile this driver as a module, choose M here: the
 	  module will be called w90p910_ts.
 
+config TOUCHSCREEN_PCAP
+	tristate "Motorola PCAP touchscreen"
+	depends on EZX_PCAP
+	help
+	  Say Y here if you have a Motorola EZX telephone and
+	  want to enable support for the built-in touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcap_ts.
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3e1c5e0b952f..4599bf7ad819 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -40,3 +40,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
new file mode 100644
index 000000000000..67fcd33595de
--- /dev/null
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -0,0 +1,271 @@
+/*
+ * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform.
+ *
+ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
+ *  Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/pm.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_ts {
+	struct pcap_chip *pcap;
+	struct input_dev *input;
+	struct delayed_work work;
+	u16 x, y;
+	u16 pressure;
+	u8 read_state;
+};
+
+#define SAMPLE_DELAY	20 /* msecs */
+
+#define X_AXIS_MIN	0
+#define X_AXIS_MAX	1023
+#define Y_AXIS_MAX	X_AXIS_MAX
+#define Y_AXIS_MIN	X_AXIS_MIN
+#define PRESSURE_MAX	X_AXIS_MAX
+#define PRESSURE_MIN	X_AXIS_MIN
+
+static void pcap_ts_read_xy(void *data, u16 res[2])
+{
+	struct pcap_ts *pcap_ts = data;
+
+	switch (pcap_ts->read_state) {
+	case PCAP_ADC_TS_M_PRESSURE:
+		/* pressure reading is unreliable */
+		if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX)
+			pcap_ts->pressure = res[0];
+		pcap_ts->read_state = PCAP_ADC_TS_M_XY;
+		schedule_delayed_work(&pcap_ts->work, 0);
+		break;
+	case PCAP_ADC_TS_M_XY:
+		pcap_ts->y = res[0];
+		pcap_ts->x = res[1];
+		if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
+		    pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
+			/* pen has been released */
+			input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 0);
+
+			pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+			schedule_delayed_work(&pcap_ts->work, 0);
+		} else {
+			/* pen is touching the screen */
+			input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
+			input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 1);
+			input_report_abs(pcap_ts->input, ABS_PRESSURE,
+						pcap_ts->pressure);
+
+			/* switch back to pressure read mode */
+			pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+			schedule_delayed_work(&pcap_ts->work,
+					msecs_to_jiffies(SAMPLE_DELAY));
+		}
+		input_sync(pcap_ts->input);
+		break;
+	default:
+		dev_warn(&pcap_ts->input->dev,
+				"pcap_ts: Warning, unhandled read_state %d\n",
+				pcap_ts->read_state);
+		break;
+	}
+}
+
+static void pcap_ts_work(struct work_struct *work)
+{
+	struct delayed_work *dw = container_of(work, struct delayed_work, work);
+	struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work);
+	u8 ch[2];
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+			pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY)
+		return;
+
+	/* start adc conversion */
+	ch[0] = PCAP_ADC_CH_TS_X1;
+	ch[1] = PCAP_ADC_CH_TS_Y1;
+	pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch,
+						pcap_ts_read_xy, pcap_ts);
+}
+
+static irqreturn_t pcap_ts_event_touch(int pirq, void *data)
+{
+	struct pcap_ts *pcap_ts = data;
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) {
+		pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+		schedule_delayed_work(&pcap_ts->work, 0);
+	}
+	return IRQ_HANDLED;
+}
+
+static int pcap_ts_open(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+	schedule_delayed_work(&pcap_ts->work, 0);
+
+	return 0;
+}
+
+static void pcap_ts_close(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+}
+
+static int __devinit pcap_ts_probe(struct platform_device *pdev)
+{
+	struct input_dev *input_dev;
+	struct pcap_ts *pcap_ts;
+	int err = -ENOMEM;
+
+	pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
+	if (!pcap_ts)
+		return err;
+
+	pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, pcap_ts);
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		goto fail;
+
+	INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	pcap_ts->input = input_dev;
+	input_set_drvdata(input_dev, pcap_ts);
+
+	input_dev->name = "pcap-touchscreen";
+	input_dev->phys = "pcap_ts/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0002;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = pcap_ts_open;
+	input_dev->close = pcap_ts_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
+			     PRESSURE_MAX, 0, 0);
+
+	err = input_register_device(pcap_ts->input);
+	if (err)
+		goto fail_allocate;
+
+	err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS),
+			pcap_ts_event_touch, 0, "Touch Screen", pcap_ts);
+	if (err)
+		goto fail_register;
+
+	return 0;
+
+fail_register:
+	input_unregister_device(input_dev);
+	goto fail;
+fail_allocate:
+	input_free_device(input_dev);
+fail:
+	kfree(pcap_ts);
+
+	return err;
+}
+
+static int __devexit pcap_ts_remove(struct platform_device *pdev)
+{
+	struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
+
+	free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts);
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	input_unregister_device(pcap_ts->input);
+
+	kfree(pcap_ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcap_ts_suspend(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR);
+	return 0;
+}
+
+static int pcap_ts_resume(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+	return 0;
+}
+
+static struct dev_pm_ops pcap_ts_pm_ops = {
+	.suspend	= pcap_ts_suspend,
+	.resume		= pcap_ts_resume,
+};
+#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops)
+#else
+#define PCAP_TS_PM_OPS NULL
+#endif
+
+static struct platform_driver pcap_ts_driver = {
+	.probe		= pcap_ts_probe,
+	.remove		= __devexit_p(pcap_ts_remove),
+	.driver		= {
+		.name	= "pcap-ts",
+		.owner	= THIS_MODULE,
+		.pm	= PCAP_TS_PM_OPS,
+	},
+};
+
+static int __init pcap_ts_init(void)
+{
+	return platform_driver_register(&pcap_ts_driver);
+}
+
+static void __exit pcap_ts_exit(void)
+{
+	platform_driver_unregister(&pcap_ts_driver);
+}
+
+module_init(pcap_ts_init);
+module_exit(pcap_ts_exit);
+
+MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
+MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_ts");
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index e86878deea71..61c47b824083 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -30,7 +30,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/videodev2.h>
-#include <linux/clk.h>
+#include <linux/pm_runtime.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
@@ -86,7 +86,6 @@ struct sh_mobile_ceu_dev {
 
 	unsigned int irq;
 	void __iomem *base;
-	struct clk *clk;
 	unsigned long video_limit;
 
 	/* lock used to protect videobuf */
@@ -361,7 +360,7 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 	if (ret)
 		goto err;
 
-	clk_enable(pcdev->clk);
+	pm_runtime_get_sync(ici->dev);
 
 	ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
 	while (ceu_read(pcdev, CSTSR) & 1)
@@ -395,7 +394,7 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 	}
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
-	clk_disable(pcdev->clk);
+	pm_runtime_put_sync(ici->dev);
 
 	icd->ops->release(icd);
 
@@ -798,7 +797,6 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 	struct sh_mobile_ceu_dev *pcdev;
 	struct resource *res;
 	void __iomem *base;
-	char clk_name[8];
 	unsigned int irq;
 	int err = 0;
 
@@ -862,13 +860,9 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 		goto exit_release_mem;
 	}
 
-	snprintf(clk_name, sizeof(clk_name), "ceu%d", pdev->id);
-	pcdev->clk = clk_get(&pdev->dev, clk_name);
-	if (IS_ERR(pcdev->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
-		err = PTR_ERR(pcdev->clk);
-		goto exit_free_irq;
-	}
+	pm_suspend_ignore_children(&pdev->dev, true);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
 
 	pcdev->ici.priv = pcdev;
 	pcdev->ici.dev = &pdev->dev;
@@ -878,12 +872,10 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 
 	err = soc_camera_host_register(&pcdev->ici);
 	if (err)
-		goto exit_free_clk;
+		goto exit_free_irq;
 
 	return 0;
 
-exit_free_clk:
-	clk_put(pcdev->clk);
 exit_free_irq:
 	free_irq(pcdev->irq, pcdev);
 exit_release_mem:
@@ -904,7 +896,6 @@ static int sh_mobile_ceu_remove(struct platform_device *pdev)
 					struct sh_mobile_ceu_dev, ici);
 
 	soc_camera_host_unregister(soc_host);
-	clk_put(pcdev->clk);
 	free_irq(pcdev->irq, pcdev);
 	if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
 		dma_release_declared_memory(&pdev->dev);
@@ -913,9 +904,27 @@ static int sh_mobile_ceu_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int sh_mobile_ceu_runtime_nop(struct device *dev)
+{
+	/* Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * This driver re-initializes all registers after
+	 * pm_runtime_get_sync() anyway so there is no need
+	 * to save and restore registers here.
+	 */
+	return 0;
+}
+
+static struct dev_pm_ops sh_mobile_ceu_dev_pm_ops = {
+	.runtime_suspend = sh_mobile_ceu_runtime_nop,
+	.runtime_resume = sh_mobile_ceu_runtime_nop,
+};
+
 static struct platform_driver sh_mobile_ceu_driver = {
 	.driver 	= {
 		.name	= "sh_mobile_ceu",
+		.pm	= &sh_mobile_ceu_dev_pm_ops,
 	},
 	.probe		= sh_mobile_ceu_probe,
 	.remove		= sh_mobile_ceu_remove,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 491ac0f800d2..570be139f9df 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -108,6 +108,19 @@ config TWL4030_CORE
 	  high speed USB OTG transceiver, an audio codec (on most
 	  versions) and many other features.
 
+config TWL4030_POWER
+	bool "Support power resources on TWL4030 family chips"
+	depends on TWL4030_CORE && ARM
+	help
+	  Say yes here if you want to use the power resources on the
+	  TWL4030 family chips.  Most of these resources are regulators,
+	  which have a separate driver; some are control signals, such
+	  as clock request handshaking.
+
+	  This driver uses board-specific data to initialize the resources
+	  and load scripts controling which resources are switched off/on
+	  or reset when a sleep, wakeup or warm reset event occurs.
+
 config MFD_TMIO
 	bool
 	default n
@@ -157,6 +170,16 @@ config MFD_WM8400
 	  the device, additional drivers must be enabled in order to use
 	  the functionality of the device.
 
+config MFD_WM831X
+	tristate "Support Wolfson Microelectronics WM831x PMICs"
+	select MFD_CORE
+	depends on I2C
+	help
+	  Support for the Wolfson Microelecronics WM831x PMICs.  This
+	  driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_WM8350
 	tristate
 
@@ -228,6 +251,16 @@ config MFD_PCF50633
 	  facilities, and registers devices for the various functions
 	  so that function-specific drivers can bind to them.
 
+config MFD_MC13783
+	tristate "Support Freescale MC13783"
+	depends on SPI_MASTER
+	select MFD_CORE
+	help
+	  Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
+	  This driver provides common support for accessing  the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config PCF50633_ADC
 	tristate "Support for NXP PCF50633 ADC"
 	depends on MFD_PCF50633
@@ -256,6 +289,15 @@ config AB3100_CORE
 	  LEDs, vibrator, system power and temperature, power management
 	  and ALSA sound.
 
+config AB3100_OTP
+	tristate "ST-Ericsson AB3100 OTP functions"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
+	  programmable memory) support. This exposes a sysfs file to read
+	  out OTP values.
+
 config EZX_PCAP
 	bool "PCAP Support"
 	depends on GENERIC_HARDIRQS && SPI_MASTER
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6f8a9a1af20b..f3b277b90d40 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
 
 obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
+wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
+obj-$(CONFIG_MFD_WM831X)	+= wm831x.o
 wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
@@ -23,6 +25,9 @@ obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 
 obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
+
+obj-$(CONFIG_MFD_MC13783)	+= mc13783-core.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
@@ -44,3 +49,4 @@ obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
 obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
+obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 13e7d7bfe85f..c533f86ff5ea 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -14,7 +14,6 @@
 #include <linux/platform_device.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
-#include <linux/workqueue.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
@@ -77,7 +76,7 @@ u8 ab3100_get_chip_type(struct ab3100 *ab3100)
 }
 EXPORT_SYMBOL(ab3100_get_chip_type);
 
-int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
+int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval)
 {
 	u8 regandval[2] = {reg, regval};
 	int err;
@@ -107,9 +106,10 @@ int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
 		err = 0;
 	}
 	mutex_unlock(&ab3100->access_mutex);
-	return 0;
+	return err;
 }
-EXPORT_SYMBOL(ab3100_set_register);
+EXPORT_SYMBOL(ab3100_set_register_interruptible);
+
 
 /*
  * The test registers exist at an I2C bus address up one
@@ -118,7 +118,7 @@ EXPORT_SYMBOL(ab3100_set_register);
  * anyway. It's currently only used from this file so declare
  * it static and do not export.
  */
-static int ab3100_set_test_register(struct ab3100 *ab3100,
+static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
 				    u8 reg, u8 regval)
 {
 	u8 regandval[2] = {reg, regval};
@@ -148,7 +148,8 @@ static int ab3100_set_test_register(struct ab3100 *ab3100,
 	return err;
 }
 
-int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
+
+int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval)
 {
 	int err;
 
@@ -202,9 +203,10 @@ int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_get_register);
+EXPORT_SYMBOL(ab3100_get_register_interruptible);
 
-int ab3100_get_register_page(struct ab3100 *ab3100,
+
+int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
 			     u8 first_reg, u8 *regvals, u8 numregs)
 {
 	int err;
@@ -258,9 +260,10 @@ int ab3100_get_register_page(struct ab3100 *ab3100,
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_get_register_page);
+EXPORT_SYMBOL(ab3100_get_register_page_interruptible);
+
 
-int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
 				 u8 reg, u8 andmask, u8 ormask)
 {
 	u8 regandval[2] = {reg, 0};
@@ -328,7 +331,8 @@ int ab3100_mask_and_set_register(struct ab3100 *ab3100,
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_mask_and_set_register);
+EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible);
+
 
 /*
  * Register a simple callback for handling any AB3100 events.
@@ -371,7 +375,7 @@ static void ab3100_work(struct work_struct *work)
 	u32 fatevent;
 	int err;
 
-	err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
+	err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
 				       event_regs, 3);
 	if (err)
 		goto err_event_wq;
@@ -417,7 +421,7 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data)
 	 * stuff and we will re-enable the interrupts once th
 	 * worker has finished.
 	 */
-	disable_irq(ab3100->i2c_client->irq);
+	disable_irq_nosync(irq);
 	schedule_work(&ab3100->work);
 	return IRQ_HANDLED;
 }
@@ -435,7 +439,7 @@ static int ab3100_registers_print(struct seq_file *s, void *p)
 	seq_printf(s, "AB3100 registers:\n");
 
 	for (reg = 0; reg < 0xff; reg++) {
-		ab3100_get_register(ab3100, reg, &value);
+		ab3100_get_register_interruptible(ab3100, reg, &value);
 		seq_printf(s, "[0x%x]:  0x%x\n", reg, value);
 	}
 	return 0;
@@ -465,14 +469,14 @@ static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int ab3100_get_set_reg(struct file *file,
-			      const char __user *user_buf,
-			      size_t count, loff_t *ppos)
+static ssize_t ab3100_get_set_reg(struct file *file,
+				  const char __user *user_buf,
+				  size_t count, loff_t *ppos)
 {
 	struct ab3100_get_set_reg_priv *priv = file->private_data;
 	struct ab3100 *ab3100 = priv->ab3100;
 	char buf[32];
-	int buf_size;
+	ssize_t buf_size;
 	int regp;
 	unsigned long user_reg;
 	int err;
@@ -515,7 +519,7 @@ static int ab3100_get_set_reg(struct file *file,
 		u8 reg = (u8) user_reg;
 		u8 regvalue;
 
-		ab3100_get_register(ab3100, reg, &regvalue);
+		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
@@ -547,8 +551,8 @@ static int ab3100_get_set_reg(struct file *file,
 			return -EINVAL;
 
 		value = (u8) user_value;
-		ab3100_set_register(ab3100, reg, value);
-		ab3100_get_register(ab3100, reg, &regvalue);
+		ab3100_set_register_interruptible(ab3100, reg, value);
+		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug write reg[0x%02x] with 0x%02x, "
@@ -662,7 +666,7 @@ ab3100_init_settings[] = {
 		.setting = 0x01
 	}, {
 		.abreg = AB3100_IMRB1,
-		.setting = 0xFF
+		.setting = 0xBF
 	}, {
 		.abreg = AB3100_IMRB2,
 		.setting = 0xFF
@@ -696,7 +700,7 @@ static int __init ab3100_setup(struct ab3100 *ab3100)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
-		err = ab3100_set_register(ab3100,
+		err = ab3100_set_register_interruptible(ab3100,
 					  ab3100_init_settings[i].abreg,
 					  ab3100_init_settings[i].setting);
 		if (err)
@@ -705,14 +709,14 @@ static int __init ab3100_setup(struct ab3100 *ab3100)
 
 	/*
 	 * Special trick to make the AB3100 use the 32kHz clock (RTC)
-	 * bit 3 in test registe 0x02 is a special, undocumented test
+	 * bit 3 in test register 0x02 is a special, undocumented test
 	 * register bit that only exist in AB3100 P1E
 	 */
 	if (ab3100->chip_id == 0xc4) {
 		dev_warn(ab3100->dev,
 			 "AB3100 P1E variant detected, "
 			 "forcing chip to 32KHz\n");
-		err = ab3100_set_test_register(ab3100, 0x02, 0x08);
+		err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08);
 	}
 
  exit_no_setup:
@@ -833,6 +837,8 @@ static int __init ab3100_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct ab3100 *ab3100;
+	struct ab3100_platform_data *ab3100_plf_data =
+		client->dev.platform_data;
 	int err;
 	int i;
 
@@ -852,8 +858,8 @@ static int __init ab3100_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, ab3100);
 
 	/* Read chip ID register */
-	err = ab3100_get_register(ab3100, AB3100_CID,
-				  &ab3100->chip_id);
+	err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
+						&ab3100->chip_id);
 	if (err) {
 		dev_err(&client->dev,
 			"could not communicate with the AB3100 analog "
@@ -916,6 +922,8 @@ static int __init ab3100_probe(struct i2c_client *client,
 	for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
 		ab3100_platform_devs[i]->dev.parent =
 			&client->dev;
+		ab3100_platform_devs[i]->dev.platform_data =
+			ab3100_plf_data;
 		platform_set_drvdata(ab3100_platform_devs[i], ab3100);
 	}
 
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
new file mode 100644
index 000000000000..0499b2031a2c
--- /dev/null
+++ b/drivers/mfd/ab3100-otp.c
@@ -0,0 +1,268 @@
+/*
+ * drivers/mfd/ab3100_otp.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Driver to read out OTP from the AB3100 Mixed-signal circuit
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/debugfs.h>
+
+/* The OTP registers */
+#define AB3100_OTP0		0xb0
+#define AB3100_OTP1		0xb1
+#define AB3100_OTP2		0xb2
+#define AB3100_OTP3		0xb3
+#define AB3100_OTP4		0xb4
+#define AB3100_OTP5		0xb5
+#define AB3100_OTP6		0xb6
+#define AB3100_OTP7		0xb7
+#define AB3100_OTPP		0xbf
+
+/**
+ * struct ab3100_otp
+ * @dev containing device
+ * @ab3100 a pointer to the parent ab3100 device struct
+ * @locked whether the OTP is locked, after locking, no more bits
+ *       can be changed but before locking it is still possible
+ *       to change bits from 1->0.
+ * @freq clocking frequency for the OTP, this frequency is either
+ *       32768Hz or 1MHz/30
+ * @paf product activation flag, indicates whether this is a real
+ *       product (paf true) or a lab board etc (paf false)
+ * @imeich if this is set it is possible to override the
+ *       IMEI number found in the tac, fac and svn fields with
+ *       (secured) software
+ * @cid customer ID
+ * @tac type allocation code of the IMEI
+ * @fac final assembly code of the IMEI
+ * @svn software version number of the IMEI
+ * @debugfs a debugfs file used when dumping to file
+ */
+struct ab3100_otp {
+	struct device *dev;
+	struct ab3100 *ab3100;
+	bool locked;
+	u32 freq;
+	bool paf;
+	bool imeich;
+	u16 cid:14;
+	u32 tac:20;
+	u8 fac;
+	u32 svn:20;
+	struct dentry *debugfs;
+};
+
+static int __init ab3100_otp_read(struct ab3100_otp *otp)
+{
+	struct ab3100 *ab = otp->ab3100;
+	u8 otpval[8];
+	u8 otpp;
+	int err;
+
+	err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp);
+	if (err) {
+		dev_err(otp->dev, "unable to read OTPP register\n");
+		return err;
+	}
+
+	err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0,
+						     otpval, 8);
+	if (err) {
+		dev_err(otp->dev, "unable to read OTP register page\n");
+		return err;
+	}
+
+	/* Cache OTP properties, they never change by nature */
+	otp->locked = (otpp & 0x80);
+	otp->freq = (otpp & 0x40) ? 32768 : 34100;
+	otp->paf = (otpval[1] & 0x80);
+	otp->imeich = (otpval[1] & 0x40);
+	otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff;
+	otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2];
+	otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4);
+	otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4);
+	return 0;
+}
+
+/*
+ * This is a simple debugfs human-readable file that dumps out
+ * the contents of the OTP.
+ */
+#ifdef CONFIG_DEBUGFS
+static int show_otp(struct seq_file *s, void *v)
+{
+	struct ab3100_otp *otp = s->private;
+	int err;
+
+	seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED");
+	seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq);
+	seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET");
+	seq_printf(s, "IMEI is %s\n", otp->imeich ?
+		   "CHANGEABLE" : "NOT CHANGEABLE");
+	seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid);
+	seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn);
+	return 0;
+}
+
+static int ab3100_otp_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3100_otp_show, inode->i_private);
+}
+
+static const struct file_operations ab3100_otp_operations = {
+	.open		= ab3100_otp_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init ab3100_otp_init_debugfs(struct device *dev,
+					  struct ab3100_otp *otp)
+{
+	otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO,
+					   NULL, otp,
+					   &ab3100_otp_operations);
+	if (!otp->debugfs) {
+		dev_err(dev, "AB3100 debugfs OTP file registration failed!\n");
+		return err;
+	}
+}
+
+static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
+{
+	debugfs_remove_file(otp->debugfs);
+}
+#else
+/* Compile this out if debugfs not selected */
+static inline int __init ab3100_otp_init_debugfs(struct device *dev,
+						 struct ab3100_otp *otp)
+{
+	return 0;
+}
+
+static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
+{
+}
+#endif
+
+#define SHOW_AB3100_ATTR(name) \
+static ssize_t ab3100_otp_##name##_show(struct device *dev, \
+			       struct device_attribute *attr, \
+			       char *buf) \
+{\
+	struct ab3100_otp *otp = dev_get_drvdata(dev); \
+	return sprintf(buf, "%u\n", otp->name); \
+}
+
+SHOW_AB3100_ATTR(locked)
+SHOW_AB3100_ATTR(freq)
+SHOW_AB3100_ATTR(paf)
+SHOW_AB3100_ATTR(imeich)
+SHOW_AB3100_ATTR(cid)
+SHOW_AB3100_ATTR(fac)
+SHOW_AB3100_ATTR(tac)
+SHOW_AB3100_ATTR(svn)
+
+static struct device_attribute ab3100_otp_attrs[] = {
+	__ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL),
+	__ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL),
+	__ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL),
+	__ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL),
+	__ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL),
+	__ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL),
+	__ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL),
+	__ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL),
+};
+
+static int __init ab3100_otp_probe(struct platform_device *pdev)
+{
+	struct ab3100_otp *otp;
+	int err = 0;
+	int i;
+
+	otp = kzalloc(sizeof(struct ab3100_otp), GFP_KERNEL);
+	if (!otp) {
+		dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");
+		return -ENOMEM;
+	}
+	otp->dev = &pdev->dev;
+
+	/* Replace platform data coming in with a local struct */
+	otp->ab3100 = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, otp);
+
+	err = ab3100_otp_read(otp);
+	if (err)
+		return err;
+
+	dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
+
+	/* sysfs entries */
+	for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) {
+		err = device_create_file(&pdev->dev,
+					 &ab3100_otp_attrs[i]);
+		if (err)
+			goto out_no_sysfs;
+	}
+
+	/* debugfs entries */
+	err = ab3100_otp_init_debugfs(&pdev->dev, otp);
+	if (err)
+		goto out_no_debugfs;
+
+	return 0;
+
+out_no_sysfs:
+	for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
+		device_remove_file(&pdev->dev,
+				   &ab3100_otp_attrs[i]);
+out_no_debugfs:
+	kfree(otp);
+	return err;
+}
+
+static int __exit ab3100_otp_remove(struct platform_device *pdev)
+{
+	struct ab3100_otp *otp = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
+		device_remove_file(&pdev->dev,
+				   &ab3100_otp_attrs[i]);
+	ab3100_otp_exit_debugfs(otp);
+	kfree(otp);
+	return 0;
+}
+
+static struct platform_driver ab3100_otp_driver = {
+	.driver = {
+		.name = "ab3100-otp",
+		.owner = THIS_MODULE,
+	},
+	.remove	 = __exit_p(ab3100_otp_remove),
+};
+
+static int __init ab3100_otp_init(void)
+{
+	return platform_driver_probe(&ab3100_otp_driver,
+				     ab3100_otp_probe);
+}
+
+static void __exit ab3100_otp_exit(void)
+{
+	platform_driver_unregister(&ab3100_otp_driver);
+}
+
+module_init(ab3100_otp_init);
+module_exit(ab3100_otp_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 5b6e58a3ba46..3d4a861976ca 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -107,8 +107,16 @@ static const u8 msp_gpios[] = {
 	MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
 	MSP_GPIO(4, SWITCH1),
 	/* switches on MMC/SD sockets */
-	MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC),	/* mmc0 WP, nCD */
-	MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC),	/* mmc1 WP, nCD */
+	/*
+	 * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be
+	 * checked for card detection. However on the EVM bit 1 and 3 gives
+	 * this status, for 0 and 1 instance respectively. The pdf also
+	 * suggests that Bit 1 and 3 should be checked for write protection.
+	 * However on the EVM bit 2 and 4 gives this status,for 0 and 1
+	 * instance respectively.
+	 */
+	MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC),	/* mmc0 WP, nCD */
+	MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC),	/* mmc1 WP, nCD */
 };
 
 #define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index c1de4afa89a6..016be4938e4c 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/mfd/ezx-pcap.h>
 #include <linux/spi/spi.h>
+#include <linux/gpio.h>
 
 #define PCAP_ADC_MAXQ		8
 struct pcap_adc_request {
@@ -106,11 +107,35 @@ int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value)
 }
 EXPORT_SYMBOL_GPL(ezx_pcap_read);
 
+int ezx_pcap_set_bits(struct pcap_chip *pcap, u8 reg_num, u32 mask, u32 val)
+{
+	int ret;
+	u32 tmp = PCAP_REGISTER_READ_OP_BIT |
+		(reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+
+	mutex_lock(&pcap->io_mutex);
+	ret = ezx_pcap_putget(pcap, &tmp);
+	if (ret)
+		goto out_unlock;
+
+	tmp &= (PCAP_REGISTER_VALUE_MASK & ~mask);
+	tmp |= (val & mask) | PCAP_REGISTER_WRITE_OP_BIT |
+		(reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+
+	ret = ezx_pcap_putget(pcap, &tmp);
+out_unlock:
+	mutex_unlock(&pcap->io_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ezx_pcap_set_bits);
+
 /* IRQ */
-static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq)
+int irq_to_pcap(struct pcap_chip *pcap, int irq)
 {
-	return 1 << (irq - pcap->irq_base);
+	return irq - pcap->irq_base;
 }
+EXPORT_SYMBOL_GPL(irq_to_pcap);
 
 int pcap_to_irq(struct pcap_chip *pcap, int irq)
 {
@@ -122,7 +147,7 @@ static void pcap_mask_irq(unsigned int irq)
 {
 	struct pcap_chip *pcap = get_irq_chip_data(irq);
 
-	pcap->msr |= irq2pcap(pcap, irq);
+	pcap->msr |= 1 << irq_to_pcap(pcap, irq);
 	queue_work(pcap->workqueue, &pcap->msr_work);
 }
 
@@ -130,7 +155,7 @@ static void pcap_unmask_irq(unsigned int irq)
 {
 	struct pcap_chip *pcap = get_irq_chip_data(irq);
 
-	pcap->msr &= ~irq2pcap(pcap, irq);
+	pcap->msr &= ~(1 << irq_to_pcap(pcap, irq));
 	queue_work(pcap->workqueue, &pcap->msr_work);
 }
 
@@ -154,34 +179,38 @@ static void pcap_isr_work(struct work_struct *work)
 	u32 msr, isr, int_sel, service;
 	int irq;
 
-	ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
-	ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
+	do {
+		ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
+		ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
 
-	/* We cant service/ack irqs that are assigned to port 2 */
-	if (!(pdata->config & PCAP_SECOND_PORT)) {
-		ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
-		isr &= ~int_sel;
-	}
-	ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
+		/* We cant service/ack irqs that are assigned to port 2 */
+		if (!(pdata->config & PCAP_SECOND_PORT)) {
+			ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
+			isr &= ~int_sel;
+		}
 
-	local_irq_disable();
-	service = isr & ~msr;
+		ezx_pcap_write(pcap, PCAP_REG_MSR, isr | msr);
+		ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
 
-	for (irq = pcap->irq_base; service; service >>= 1, irq++) {
-		if (service & 1) {
-			struct irq_desc *desc = irq_to_desc(irq);
+		local_irq_disable();
+		service = isr & ~msr;
+		for (irq = pcap->irq_base; service; service >>= 1, irq++) {
+			if (service & 1) {
+				struct irq_desc *desc = irq_to_desc(irq);
 
-			if (WARN(!desc, KERN_WARNING
-					"Invalid PCAP IRQ %d\n", irq))
-				break;
+				if (WARN(!desc, KERN_WARNING
+						"Invalid PCAP IRQ %d\n", irq))
+					break;
 
-			if (desc->status & IRQ_DISABLED)
-				note_interrupt(irq, desc, IRQ_NONE);
-			else
-				desc->handle_irq(irq, desc);
+				if (desc->status & IRQ_DISABLED)
+					note_interrupt(irq, desc, IRQ_NONE);
+				else
+					desc->handle_irq(irq, desc);
+			}
 		}
-	}
-	local_irq_enable();
+		local_irq_enable();
+		ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr);
+	} while (gpio_get_value(irq_to_gpio(pcap->spi->irq)));
 }
 
 static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -194,6 +223,19 @@ static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
 }
 
 /* ADC */
+void pcap_set_ts_bits(struct pcap_chip *pcap, u32 bits)
+{
+	u32 tmp;
+
+	mutex_lock(&pcap->adc_mutex);
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= ~(PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
+	tmp |= bits & (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	mutex_unlock(&pcap->adc_mutex);
+}
+EXPORT_SYMBOL_GPL(pcap_set_ts_bits);
+
 static void pcap_disable_adc(struct pcap_chip *pcap)
 {
 	u32 tmp;
@@ -216,15 +258,16 @@ static void pcap_adc_trigger(struct pcap_chip *pcap)
 		mutex_unlock(&pcap->adc_mutex);
 		return;
 	}
-	mutex_unlock(&pcap->adc_mutex);
-
-	/* start conversion on requested bank */
-	tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
+	/* start conversion on requested bank, save TS_M bits */
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
+	tmp |= pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
 
 	if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1)
 		tmp |= PCAP_ADC_AD_SEL1;
 
 	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	mutex_unlock(&pcap->adc_mutex);
 	ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC);
 }
 
@@ -499,7 +542,7 @@ static void __exit ezx_pcap_exit(void)
 	spi_unregister_driver(&ezxpcap_driver);
 }
 
-module_init(ezx_pcap_init);
+subsys_initcall(ezx_pcap_init);
 module_exit(ezx_pcap_exit);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
new file mode 100644
index 000000000000..e354d2912ef1
--- /dev/null
+++ b/drivers/mfd/mc13783-core.c
@@ -0,0 +1,427 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This code is in parts based on wm8350-core.c and pcf50633-core.c
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/mfd/mc13783-private.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/spi/spi.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+
+#define MC13783_MAX_REG_NUM	0x3f
+#define MC13783_FRAME_MASK	0x00ffffff
+#define MC13783_MAX_REG_NUM	0x3f
+#define MC13783_REG_NUM_SHIFT	0x19
+#define MC13783_WRITE_BIT_SHIFT	31
+
+static inline int spi_rw(struct spi_device *spi, u8 * buf, size_t len)
+{
+	struct spi_transfer t = {
+		.tx_buf = (const void *)buf,
+		.rx_buf = buf,
+		.len = len,
+		.cs_change = 0,
+		.delay_usecs = 0,
+	};
+	struct spi_message m;
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+	if (spi_sync(spi, &m) != 0 || m.status != 0)
+		return -EINVAL;
+	return len - m.actual_length;
+}
+
+static int mc13783_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val)
+{
+	unsigned int frame = 0;
+	int ret = 0;
+
+	if (reg_num > MC13783_MAX_REG_NUM)
+		return -EINVAL;
+
+	frame |= reg_num << MC13783_REG_NUM_SHIFT;
+
+	ret = spi_rw(mc13783->spi_device, (u8 *)&frame, 4);
+
+	*reg_val = frame & MC13783_FRAME_MASK;
+
+	return ret;
+}
+
+static int mc13783_write(struct mc13783 *mc13783, int reg_num, u32 reg_val)
+{
+	unsigned int frame = 0;
+
+	if (reg_num > MC13783_MAX_REG_NUM)
+		return -EINVAL;
+
+	frame |= (1 << MC13783_WRITE_BIT_SHIFT);
+	frame |= reg_num << MC13783_REG_NUM_SHIFT;
+	frame |= reg_val & MC13783_FRAME_MASK;
+
+	return spi_rw(mc13783->spi_device, (u8 *)&frame, 4);
+}
+
+int mc13783_reg_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val)
+{
+	int ret;
+
+	mutex_lock(&mc13783->io_lock);
+	ret = mc13783_read(mc13783, reg_num, reg_val);
+	mutex_unlock(&mc13783->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mc13783_reg_read);
+
+int mc13783_reg_write(struct mc13783 *mc13783, int reg_num, u32 reg_val)
+{
+	int ret;
+
+	mutex_lock(&mc13783->io_lock);
+	ret = mc13783_write(mc13783, reg_num, reg_val);
+	mutex_unlock(&mc13783->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mc13783_reg_write);
+
+/**
+ * mc13783_set_bits - Bitmask write
+ *
+ * @mc13783: Pointer to mc13783 control structure
+ * @reg:    Register to access
+ * @mask:   Mask of bits to change
+ * @val:    Value to set for masked bits
+ */
+int mc13783_set_bits(struct mc13783 *mc13783, int reg, u32 mask, u32 val)
+{
+	u32 tmp;
+	int ret;
+
+	mutex_lock(&mc13783->io_lock);
+
+	ret = mc13783_read(mc13783, reg, &tmp);
+	tmp = (tmp & ~mask) | val;
+	if (ret == 0)
+		ret = mc13783_write(mc13783, reg, tmp);
+
+	mutex_unlock(&mc13783->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mc13783_set_bits);
+
+int mc13783_register_irq(struct mc13783 *mc13783, int irq,
+		void (*handler) (int, void *), void *data)
+{
+	if (irq < 0 || irq > MC13783_NUM_IRQ || !handler)
+		return -EINVAL;
+
+	if (WARN_ON(mc13783->irq_handler[irq].handler))
+		return -EBUSY;
+
+	mutex_lock(&mc13783->io_lock);
+	mc13783->irq_handler[irq].handler = handler;
+	mc13783->irq_handler[irq].data = data;
+	mutex_unlock(&mc13783->io_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mc13783_register_irq);
+
+int mc13783_free_irq(struct mc13783 *mc13783, int irq)
+{
+	if (irq < 0 || irq > MC13783_NUM_IRQ)
+		return -EINVAL;
+
+	mutex_lock(&mc13783->io_lock);
+	mc13783->irq_handler[irq].handler = NULL;
+	mutex_unlock(&mc13783->io_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mc13783_free_irq);
+
+static void mc13783_irq_work(struct work_struct *work)
+{
+	struct mc13783 *mc13783 = container_of(work, struct mc13783, work);
+	int i;
+	unsigned int adc_sts;
+
+	/* check if the adc has finished any completion */
+	mc13783_reg_read(mc13783, MC13783_REG_INTERRUPT_STATUS_0, &adc_sts);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0,
+			adc_sts & MC13783_INT_STAT_ADCDONEI);
+
+	if (adc_sts & MC13783_INT_STAT_ADCDONEI)
+		complete_all(&mc13783->adc_done);
+
+	for (i = 0; i < MC13783_NUM_IRQ; i++)
+		if (mc13783->irq_handler[i].handler)
+			mc13783->irq_handler[i].handler(i,
+					mc13783->irq_handler[i].data);
+	enable_irq(mc13783->irq);
+}
+
+static irqreturn_t mc13783_interrupt(int irq, void *dev_id)
+{
+	struct mc13783 *mc13783 = dev_id;
+
+	disable_irq_nosync(irq);
+
+	schedule_work(&mc13783->work);
+	return IRQ_HANDLED;
+}
+
+/* set adc to ts interrupt mode, which generates touchscreen wakeup interrupt */
+static inline void mc13783_adc_set_ts_irq_mode(struct mc13783 *mc13783)
+{
+	unsigned int reg_adc0, reg_adc1;
+
+	reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
+			| MC13783_ADC0_TSMOD0;
+	reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN;
+
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0);
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1);
+}
+
+int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+		unsigned int channel, unsigned int *sample)
+{
+	unsigned int reg_adc0, reg_adc1;
+	int i;
+
+	mutex_lock(&mc13783->adc_conv_lock);
+
+	/* set up auto incrementing anyway to make quick read */
+	reg_adc0 =  MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
+	/* enable the adc, ignore external triggering and set ASC to trigger
+	 * conversion */
+	reg_adc1 =  MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN
+		| MC13783_ADC1_ASC;
+
+	/* setup channel number */
+	if (channel > 7)
+		reg_adc1 |= MC13783_ADC1_ADSEL;
+
+	switch (mode) {
+	case MC13783_ADC_MODE_TS:
+		/* enables touch screen reference mode and set touchscreen mode
+		 * to position mode */
+		reg_adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
+			| MC13783_ADC0_TSMOD0 | MC13783_ADC0_TSMOD1;
+		reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+		break;
+	case MC13783_ADC_MODE_SINGLE_CHAN:
+		reg_adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
+		reg_adc1 |= MC13783_ADC1_RAND;
+		break;
+	case MC13783_ADC_MODE_MULT_CHAN:
+		reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0);
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1);
+
+	wait_for_completion_interruptible(&mc13783->adc_done);
+
+	for (i = 0; i < 4; i++)
+		mc13783_reg_read(mc13783, MC13783_REG_ADC_2, &sample[i]);
+
+	if (mc13783->ts_active)
+		mc13783_adc_set_ts_irq_mode(mc13783);
+
+	mutex_unlock(&mc13783->adc_conv_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion);
+
+void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status)
+{
+	mc13783->ts_active = status;
+}
+EXPORT_SYMBOL_GPL(mc13783_adc_set_ts_status);
+
+static int mc13783_check_revision(struct mc13783 *mc13783)
+{
+	u32 rev_id, rev1, rev2, finid, icid;
+
+	mc13783_read(mc13783, MC13783_REG_REVISION, &rev_id);
+
+	rev1 = (rev_id & 0x018) >> 3;
+	rev2 = (rev_id & 0x007);
+	icid = (rev_id & 0x01C0) >> 6;
+	finid = (rev_id & 0x01E00) >> 9;
+
+	/* Ver 0.2 is actually 3.2a.  Report as 3.2 */
+	if ((rev1 == 0) && (rev2 == 2))
+		rev1 = 3;
+
+	if (rev1 == 0 || icid != 2) {
+		dev_err(mc13783->dev, "No MC13783 detected.\n");
+		return -ENODEV;
+	}
+
+	mc13783->revision = ((rev1 * 10) + rev2);
+	dev_info(mc13783->dev, "MC13783 Rev %d.%d FinVer %x detected\n", rev1,
+	       rev2, finid);
+
+	return 0;
+}
+
+/*
+ * Register a client device.  This is non-fatal since there is no need to
+ * fail the entire device init due to a single platform device failing.
+ */
+static void mc13783_client_dev_register(struct mc13783 *mc13783,
+				       const char *name)
+{
+	struct mfd_cell cell = {};
+
+	cell.name = name;
+
+	mfd_add_devices(mc13783->dev, -1, &cell, 1, NULL, 0);
+}
+
+static int __devinit mc13783_probe(struct spi_device *spi)
+{
+	struct mc13783 *mc13783;
+	struct mc13783_platform_data *pdata = spi->dev.platform_data;
+	int ret;
+
+	mc13783 = kzalloc(sizeof(struct mc13783), GFP_KERNEL);
+	if (!mc13783)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, mc13783);
+	spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
+	spi->bits_per_word = 32;
+	spi_setup(spi);
+
+	mc13783->spi_device = spi;
+	mc13783->dev = &spi->dev;
+	mc13783->irq = spi->irq;
+
+	INIT_WORK(&mc13783->work, mc13783_irq_work);
+	mutex_init(&mc13783->io_lock);
+	mutex_init(&mc13783->adc_conv_lock);
+	init_completion(&mc13783->adc_done);
+
+	if (pdata) {
+		mc13783->flags = pdata->flags;
+		mc13783->regulators = pdata->regulators;
+		mc13783->num_regulators = pdata->num_regulators;
+	}
+
+	if (mc13783_check_revision(mc13783)) {
+		ret = -ENODEV;
+		goto err_out;
+	}
+
+	/* clear and mask all interrupts */
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, 0x00ffffff);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_0, 0x00ffffff);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_1, 0x00ffffff);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_1, 0x00ffffff);
+
+	/* unmask adcdone interrupts */
+	mc13783_set_bits(mc13783, MC13783_REG_INTERRUPT_MASK_0,
+			MC13783_INT_MASK_ADCDONEM, 0);
+
+	ret = request_irq(mc13783->irq, mc13783_interrupt,
+			IRQF_DISABLED | IRQF_TRIGGER_HIGH, "mc13783",
+			mc13783);
+	if (ret)
+		goto err_out;
+
+	if (mc13783->flags & MC13783_USE_CODEC)
+		mc13783_client_dev_register(mc13783, "mc13783-codec");
+	if (mc13783->flags & MC13783_USE_ADC)
+		mc13783_client_dev_register(mc13783, "mc13783-adc");
+	if (mc13783->flags & MC13783_USE_RTC)
+		mc13783_client_dev_register(mc13783, "mc13783-rtc");
+	if (mc13783->flags & MC13783_USE_REGULATOR)
+		mc13783_client_dev_register(mc13783, "mc13783-regulator");
+	if (mc13783->flags & MC13783_USE_TOUCHSCREEN)
+		mc13783_client_dev_register(mc13783, "mc13783-ts");
+
+	return 0;
+
+err_out:
+	kfree(mc13783);
+	return ret;
+}
+
+static int __devexit mc13783_remove(struct spi_device *spi)
+{
+	struct mc13783 *mc13783;
+
+	mc13783 = dev_get_drvdata(&spi->dev);
+
+	free_irq(mc13783->irq, mc13783);
+
+	mfd_remove_devices(&spi->dev);
+
+	return 0;
+}
+
+static struct spi_driver pmic_driver = {
+	.driver = {
+		   .name = "mc13783",
+		   .bus = &spi_bus_type,
+		   .owner = THIS_MODULE,
+	},
+	.probe = mc13783_probe,
+	.remove = __devexit_p(mc13783_remove),
+};
+
+static int __init pmic_init(void)
+{
+	return spi_register_driver(&pmic_driver);
+}
+subsys_initcall(pmic_init);
+
+static void __exit pmic_exit(void)
+{
+	spi_unregister_driver(&pmic_driver);
+}
+module_exit(pmic_exit);
+
+MODULE_DESCRIPTION("Core/Protocol driver for Freescale MC13783 PMIC");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 54ddf3772e0c..ae15e495e20e 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -25,7 +25,7 @@ static int mfd_add_device(struct device *parent, int id,
 	int ret = -ENOMEM;
 	int r;
 
-	pdev = platform_device_alloc(cell->name, id);
+	pdev = platform_device_alloc(cell->name, id + cell->id);
 	if (!pdev)
 		goto fail_alloc;
 
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index c2d05becfa97..3d31e97d6a45 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -73,15 +73,10 @@ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
 	struct pcf50633_adc *adc = __to_adc(pcf);
 	int head;
 
-	mutex_lock(&adc->queue_mutex);
-
 	head = adc->queue_head;
 
-	if (!adc->queue[head]) {
-		mutex_unlock(&adc->queue_mutex);
+	if (!adc->queue[head])
 		return;
-	}
-	mutex_unlock(&adc->queue_mutex);
 
 	adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg);
 }
@@ -99,16 +94,17 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
 
 	if (adc->queue[tail]) {
 		mutex_unlock(&adc->queue_mutex);
+		dev_err(pcf->dev, "ADC queue is full, dropping request\n");
 		return -EBUSY;
 	}
 
 	adc->queue[tail] = req;
+	if (head == tail)
+		trigger_next_adc_job_if_any(pcf);
 	adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
 
 	mutex_unlock(&adc->queue_mutex);
 
-	trigger_next_adc_job_if_any(pcf);
-
 	return 0;
 }
 
@@ -124,6 +120,7 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
 int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
 {
 	struct pcf50633_adc_request *req;
+	int err;
 
 	/* req is freed when the result is ready, in interrupt handler */
 	req = kzalloc(sizeof(*req), GFP_KERNEL);
@@ -136,9 +133,13 @@ int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
 	req->callback_param = req;
 
 	init_completion(&req->completion);
-	adc_enqueue_request(pcf, req);
+	err = adc_enqueue_request(pcf, req);
+	if (err)
+		return err;
+
 	wait_for_completion(&req->completion);
 
+	/* FIXME by this time req might be already freed */
 	return req->result;
 }
 EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
@@ -159,9 +160,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
 	req->callback = callback;
 	req->callback_param = callback_param;
 
-	adc_enqueue_request(pcf, req);
-
-	return 0;
+	return adc_enqueue_request(pcf, req);
 }
 EXPORT_SYMBOL_GPL(pcf50633_adc_async_read);
 
@@ -184,7 +183,7 @@ static void pcf50633_adc_irq(int irq, void *data)
 	struct pcf50633_adc *adc = data;
 	struct pcf50633 *pcf = adc->pcf;
 	struct pcf50633_adc_request *req;
-	int head;
+	int head, res;
 
 	mutex_lock(&adc->queue_mutex);
 	head = adc->queue_head;
@@ -199,12 +198,13 @@ static void pcf50633_adc_irq(int irq, void *data)
 	adc->queue_head = (head + 1) &
 				      (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
 
+	res = adc_result(pcf);
+	trigger_next_adc_job_if_any(pcf);
+
 	mutex_unlock(&adc->queue_mutex);
 
-	req->callback(pcf, req->callback_param, adc_result(pcf));
+	req->callback(pcf, req->callback_param, res);
 	kfree(req);
-
-	trigger_next_adc_job_if_any(pcf);
 }
 
 static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 8d3c38bf9714..d26d7747175e 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -444,7 +444,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
 
 	get_device(pcf->dev);
 	disable_irq_nosync(pcf->irq);
-	schedule_work(&pcf->irq_work);
+	queue_work(pcf->work_queue, &pcf->irq_work);
 
 	return IRQ_HANDLED;
 }
@@ -575,6 +575,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	pcf->dev = &client->dev;
 	pcf->i2c_client = client;
 	pcf->irq = client->irq;
+	pcf->work_queue = create_singlethread_workqueue("pcf50633");
 
 	INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
 
@@ -651,6 +652,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	return 0;
 
 err:
+	destroy_workqueue(pcf->work_queue);
 	kfree(pcf);
 	return ret;
 }
@@ -661,6 +663,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 	int i;
 
 	free_irq(pcf->irq, pcf);
+	destroy_workqueue(pcf->work_queue);
 
 	platform_device_unregister(pcf->input_pdev);
 	platform_device_unregister(pcf->rtc_pdev);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index ca54996ffd0e..e424cf6d8e9e 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -89,6 +89,12 @@
 #define twl_has_madc()	false
 #endif
 
+#ifdef CONFIG_TWL4030_POWER
+#define twl_has_power()        true
+#else
+#define twl_has_power()        false
+#endif
+
 #if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
 #define twl_has_rtc()	true
 #else
@@ -115,6 +121,12 @@
 
 #define TWL4030_NUM_SLAVES		4
 
+#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
+	|| defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
+#define twl_has_pwrbutton()	true
+#else
+#define twl_has_pwrbutton()	false
+#endif
 
 /* Base Address defns for twl4030_map[] */
 
@@ -538,6 +550,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
+	if (twl_has_pwrbutton()) {
+		child = add_child(1, "twl4030_pwrbutton",
+				NULL, 0, true, pdata->irq_base + 8 + 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
 	if (twl_has_regulator()) {
 		/*
 		child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
@@ -788,6 +807,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	/* setup clock framework */
 	clocks_init(&client->dev);
 
+	/* load power event scripts */
+	if (twl_has_power() && pdata->power)
+		twl4030_power_init(pdata->power);
+
 	/* Maybe init the T2 Interrupt subsystem */
 	if (client->irq
 			&& pdata->irq_base
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 7d430835655f..fb194fe244c1 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -424,7 +424,7 @@ static void twl4030_sih_do_edge(struct work_struct *work)
 	/* see what work we have */
 	spin_lock_irq(&sih_agent_lock);
 	edge_change = agent->edge_change;
-	agent->edge_change = 0;;
+	agent->edge_change = 0;
 	sih = edge_change ? agent->sih : NULL;
 	spin_unlock_irq(&sih_agent_lock);
 	if (!sih)
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
new file mode 100644
index 000000000000..d423e0c4176b
--- /dev/null
+++ b/drivers/mfd/twl4030-power.c
@@ -0,0 +1,472 @@
+/*
+ * linux/drivers/i2c/chips/twl4030-power.c
+ *
+ * Handle TWL4030 Power initialization
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2006 Texas Instruments, Inc
+ *
+ * Written by 	Kalle Jokiniemi
+ *		Peter De Schrijver <peter.de-schrijver@nokia.com>
+ * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+static u8 twl4030_start_script_address = 0x2b;
+
+#define PWR_P1_SW_EVENTS	0x10
+#define PWR_DEVOFF	(1<<0)
+
+#define PHY_TO_OFF_PM_MASTER(p)		(p - 0x36)
+#define PHY_TO_OFF_PM_RECEIVER(p)	(p - 0x5b)
+
+/* resource - hfclk */
+#define R_HFCLKOUT_DEV_GRP 	PHY_TO_OFF_PM_RECEIVER(0xe6)
+
+/* PM events */
+#define R_P1_SW_EVENTS		PHY_TO_OFF_PM_MASTER(0x46)
+#define R_P2_SW_EVENTS		PHY_TO_OFF_PM_MASTER(0x47)
+#define R_P3_SW_EVENTS		PHY_TO_OFF_PM_MASTER(0x48)
+#define R_CFG_P1_TRANSITION	PHY_TO_OFF_PM_MASTER(0x36)
+#define R_CFG_P2_TRANSITION	PHY_TO_OFF_PM_MASTER(0x37)
+#define R_CFG_P3_TRANSITION	PHY_TO_OFF_PM_MASTER(0x38)
+
+#define LVL_WAKEUP	0x08
+
+#define ENABLE_WARMRESET (1<<4)
+
+#define END_OF_SCRIPT		0x3f
+
+#define R_SEQ_ADD_A2S		PHY_TO_OFF_PM_MASTER(0x55)
+#define R_SEQ_ADD_S2A12		PHY_TO_OFF_PM_MASTER(0x56)
+#define	R_SEQ_ADD_S2A3		PHY_TO_OFF_PM_MASTER(0x57)
+#define	R_SEQ_ADD_WARM		PHY_TO_OFF_PM_MASTER(0x58)
+#define R_MEMORY_ADDRESS	PHY_TO_OFF_PM_MASTER(0x59)
+#define R_MEMORY_DATA		PHY_TO_OFF_PM_MASTER(0x5a)
+
+#define R_PROTECT_KEY		0x0E
+#define R_KEY_1			0xC0
+#define R_KEY_2			0x0C
+
+/* resource configuration registers */
+
+#define DEVGROUP_OFFSET		0
+#define TYPE_OFFSET		1
+
+/* Bit positions */
+#define DEVGROUP_SHIFT		5
+#define DEVGROUP_MASK		(7 << DEVGROUP_SHIFT)
+#define TYPE_SHIFT		0
+#define TYPE_MASK		(7 << TYPE_SHIFT)
+#define TYPE2_SHIFT		3
+#define TYPE2_MASK		(3 << TYPE2_SHIFT)
+
+static u8 res_config_addrs[] = {
+	[RES_VAUX1]	= 0x17,
+	[RES_VAUX2]	= 0x1b,
+	[RES_VAUX3]	= 0x1f,
+	[RES_VAUX4]	= 0x23,
+	[RES_VMMC1]	= 0x27,
+	[RES_VMMC2]	= 0x2b,
+	[RES_VPLL1]	= 0x2f,
+	[RES_VPLL2]	= 0x33,
+	[RES_VSIM]	= 0x37,
+	[RES_VDAC]	= 0x3b,
+	[RES_VINTANA1]	= 0x3f,
+	[RES_VINTANA2]	= 0x43,
+	[RES_VINTDIG]	= 0x47,
+	[RES_VIO]	= 0x4b,
+	[RES_VDD1]	= 0x55,
+	[RES_VDD2]	= 0x63,
+	[RES_VUSB_1V5]	= 0x71,
+	[RES_VUSB_1V8]	= 0x74,
+	[RES_VUSB_3V1]	= 0x77,
+	[RES_VUSBCP]	= 0x7a,
+	[RES_REGEN]	= 0x7f,
+	[RES_NRES_PWRON] = 0x82,
+	[RES_CLKEN]	= 0x85,
+	[RES_SYSEN]	= 0x88,
+	[RES_HFCLKOUT]	= 0x8b,
+	[RES_32KCLKOUT]	= 0x8e,
+	[RES_RESET]	= 0x91,
+	[RES_Main_Ref]	= 0x94,
+};
+
+static int __init twl4030_write_script_byte(u8 address, u8 byte)
+{
+	int err;
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_MEMORY_ADDRESS);
+	if (err)
+		goto out;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+				R_MEMORY_DATA);
+out:
+	return err;
+}
+
+static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+					   u8 delay, u8 next)
+{
+	int err;
+
+	address *= 4;
+	err = twl4030_write_script_byte(address++, pmb_message >> 8);
+	if (err)
+		goto out;
+	err = twl4030_write_script_byte(address++, pmb_message & 0xff);
+	if (err)
+		goto out;
+	err = twl4030_write_script_byte(address++, delay);
+	if (err)
+		goto out;
+	err = twl4030_write_script_byte(address++, next);
+out:
+	return err;
+}
+
+static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+				       int len)
+{
+	int err;
+
+	for (; len; len--, address++, script++) {
+		if (len == 1) {
+			err = twl4030_write_script_ins(address,
+						script->pmb_message,
+						script->delay,
+						END_OF_SCRIPT);
+			if (err)
+				break;
+		} else {
+			err = twl4030_write_script_ins(address,
+						script->pmb_message,
+						script->delay,
+						address + 1);
+			if (err)
+				break;
+		}
+	}
+	return err;
+}
+
+static int __init twl4030_config_wakeup3_sequence(u8 address)
+{
+	int err;
+	u8 data;
+
+	/* Set SLEEP to ACTIVE SEQ address for P3 */
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_S2A3);
+	if (err)
+		goto out;
+
+	/* P3 LVL_WAKEUP should be on LEVEL */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+				R_P3_SW_EVENTS);
+	if (err)
+		goto out;
+	data |= LVL_WAKEUP;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+				R_P3_SW_EVENTS);
+out:
+	if (err)
+		pr_err("TWL4030 wakeup sequence for P3 config error\n");
+	return err;
+}
+
+static int __init twl4030_config_wakeup12_sequence(u8 address)
+{
+	int err = 0;
+	u8 data;
+
+	/* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_S2A12);
+	if (err)
+		goto out;
+
+	/* P1/P2 LVL_WAKEUP should be on LEVEL */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	data |= LVL_WAKEUP;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	data |= LVL_WAKEUP;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
+		/* Disabling AC charger effect on sleep-active transitions */
+		err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+					R_CFG_P1_TRANSITION);
+		if (err)
+			goto out;
+		data &= ~(1<<1);
+		err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+					R_CFG_P1_TRANSITION);
+		if (err)
+			goto out;
+	}
+
+out:
+	if (err)
+		pr_err("TWL4030 wakeup sequence for P1 and P2" \
+			"config error\n");
+	return err;
+}
+
+static int __init twl4030_config_sleep_sequence(u8 address)
+{
+	int err;
+
+	/* Set ACTIVE to SLEEP SEQ address in T2 memory*/
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_A2S);
+
+	if (err)
+		pr_err("TWL4030 sleep sequence config error\n");
+
+	return err;
+}
+
+static int __init twl4030_config_warmreset_sequence(u8 address)
+{
+	int err;
+	u8 rd_data;
+
+	/* Set WARM RESET SEQ address for P1 */
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_WARM);
+	if (err)
+		goto out;
+
+	/* P1/P2/P3 enable WARMRESET */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	rd_data |= ENABLE_WARMRESET;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	rd_data |= ENABLE_WARMRESET;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+				R_P3_SW_EVENTS);
+	if (err)
+		goto out;
+
+	rd_data |= ENABLE_WARMRESET;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+				R_P3_SW_EVENTS);
+out:
+	if (err)
+		pr_err("TWL4030 warmreset seq config error\n");
+	return err;
+}
+
+static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+{
+	int rconfig_addr;
+	int err;
+	u8 type;
+	u8 grp;
+
+	if (rconfig->resource > TOTAL_RESOURCES) {
+		pr_err("TWL4030 Resource %d does not exist\n",
+			rconfig->resource);
+		return -EINVAL;
+	}
+
+	rconfig_addr = res_config_addrs[rconfig->resource];
+
+	/* Set resource group */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp,
+				rconfig_addr + DEVGROUP_OFFSET);
+	if (err) {
+		pr_err("TWL4030 Resource %d group could not be read\n",
+			rconfig->resource);
+		return err;
+	}
+
+	if (rconfig->devgroup >= 0) {
+		grp &= ~DEVGROUP_MASK;
+		grp |= rconfig->devgroup << DEVGROUP_SHIFT;
+		err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+					grp, rconfig_addr + DEVGROUP_OFFSET);
+		if (err < 0) {
+			pr_err("TWL4030 failed to program devgroup\n");
+			return err;
+		}
+	}
+
+	/* Set resource types */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
+				rconfig_addr + TYPE_OFFSET);
+	if (err < 0) {
+		pr_err("TWL4030 Resource %d type could not be read\n",
+			rconfig->resource);
+		return err;
+	}
+
+	if (rconfig->type >= 0) {
+		type &= ~TYPE_MASK;
+		type |= rconfig->type << TYPE_SHIFT;
+	}
+
+	if (rconfig->type2 >= 0) {
+		type &= ~TYPE2_MASK;
+		type |= rconfig->type2 << TYPE2_SHIFT;
+	}
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+				type, rconfig_addr + TYPE_OFFSET);
+	if (err < 0) {
+		pr_err("TWL4030 failed to program resource type\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int __init load_twl4030_script(struct twl4030_script *tscript,
+	       u8 address)
+{
+	int err;
+	static int order;
+
+	/* Make sure the script isn't going beyond last valid address (0x3f) */
+	if ((address + tscript->size) > END_OF_SCRIPT) {
+		pr_err("TWL4030 scripts too big error\n");
+		return -EINVAL;
+	}
+
+	err = twl4030_write_script(address, tscript->script, tscript->size);
+	if (err)
+		goto out;
+
+	if (tscript->flags & TWL4030_WRST_SCRIPT) {
+		err = twl4030_config_warmreset_sequence(address);
+		if (err)
+			goto out;
+	}
+	if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) {
+		err = twl4030_config_wakeup12_sequence(address);
+		if (err)
+			goto out;
+		order = 1;
+	}
+	if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) {
+		err = twl4030_config_wakeup3_sequence(address);
+		if (err)
+			goto out;
+	}
+	if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+		if (order)
+			pr_warning("TWL4030: Bad order of scripts (sleep "\
+					"script before wakeup) Leads to boot"\
+					"failure on some boards\n");
+		err = twl4030_config_sleep_sequence(address);
+out:
+	return err;
+}
+
+void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
+{
+	int err = 0;
+	int i;
+	struct twl4030_resconfig *resconfig;
+	u8 address = twl4030_start_script_address;
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1,
+				R_PROTECT_KEY);
+	if (err)
+		goto unlock;
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2,
+				R_PROTECT_KEY);
+	if (err)
+		goto unlock;
+
+	for (i = 0; i < twl4030_scripts->num; i++) {
+		err = load_twl4030_script(twl4030_scripts->scripts[i], address);
+		if (err)
+			goto load;
+		address += twl4030_scripts->scripts[i]->size;
+	}
+
+	resconfig = twl4030_scripts->resource_config;
+	if (resconfig) {
+		while (resconfig->resource) {
+			err = twl4030_configure_resource(resconfig);
+			if (err)
+				goto resource;
+			resconfig++;
+
+		}
+	}
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
+	if (err)
+		pr_err("TWL4030 Unable to relock registers\n");
+	return;
+
+unlock:
+	if (err)
+		pr_err("TWL4030 Unable to unlock registers\n");
+	return;
+load:
+	if (err)
+		pr_err("TWL4030 failed to load scripts\n");
+	return;
+resource:
+	if (err)
+		pr_err("TWL4030 failed to configure resource\n");
+	return;
+}
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
new file mode 100644
index 000000000000..49b7885c2702
--- /dev/null
+++ b/drivers/mfd/wm831x-core.c
@@ -0,0 +1,1549 @@
+/*
+ * wm831x-core.c  --  Device access for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/otp.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+/* Current settings - values are 2*2^(reg_val/4) microamps.  These are
+ * exported since they are used by multiple drivers.
+ */
+int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = {
+	2,
+	2,
+	3,
+	3,
+	4,
+	5,
+	6,
+	7,
+	8,
+	10,
+	11,
+	13,
+	16,
+	19,
+	23,
+	27,
+	32,
+	38,
+	45,
+	54,
+	64,
+	76,
+	91,
+	108,
+	128,
+	152,
+	181,
+	215,
+	256,
+	304,
+	362,
+	431,
+	512,
+	609,
+	724,
+	861,
+	1024,
+	1218,
+	1448,
+	1722,
+	2048,
+	2435,
+	2896,
+	3444,
+	4096,
+	4871,
+	5793,
+	6889,
+	8192,
+	9742,
+	11585,
+	13777,
+	16384,
+	19484,
+	23170,
+	27554,
+};
+EXPORT_SYMBOL_GPL(wm831x_isinkv_values);
+
+enum wm831x_parent {
+	WM8310 = 0,
+	WM8311 = 1,
+	WM8312 = 2,
+};
+
+static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
+{
+	if (!wm831x->locked)
+		return 0;
+
+	switch (reg) {
+	case WM831X_WATCHDOG:
+	case WM831X_DC4_CONTROL:
+	case WM831X_ON_PIN_CONTROL:
+	case WM831X_BACKUP_CHARGER_CONTROL:
+	case WM831X_CHARGER_CONTROL_1:
+	case WM831X_CHARGER_CONTROL_2:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+/**
+ * wm831x_reg_unlock: Unlock user keyed registers
+ *
+ * The WM831x has a user key preventing writes to particularly
+ * critical registers.  This function locks those registers,
+ * allowing writes to them.
+ */
+void wm831x_reg_lock(struct wm831x *wm831x)
+{
+	int ret;
+
+	ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0);
+	if (ret == 0) {
+		dev_vdbg(wm831x->dev, "Registers locked\n");
+
+		mutex_lock(&wm831x->io_lock);
+		WARN_ON(wm831x->locked);
+		wm831x->locked = 1;
+		mutex_unlock(&wm831x->io_lock);
+	} else {
+		dev_err(wm831x->dev, "Failed to lock registers: %d\n", ret);
+	}
+
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_lock);
+
+/**
+ * wm831x_reg_unlock: Unlock user keyed registers
+ *
+ * The WM831x has a user key preventing writes to particularly
+ * critical registers.  This function locks those registers,
+ * preventing spurious writes.
+ */
+int wm831x_reg_unlock(struct wm831x *wm831x)
+{
+	int ret;
+
+	/* 0x9716 is the value required to unlock the registers */
+	ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0x9716);
+	if (ret == 0) {
+		dev_vdbg(wm831x->dev, "Registers unlocked\n");
+
+		mutex_lock(&wm831x->io_lock);
+		WARN_ON(!wm831x->locked);
+		wm831x->locked = 0;
+		mutex_unlock(&wm831x->io_lock);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_unlock);
+
+static int wm831x_read(struct wm831x *wm831x, unsigned short reg,
+		       int bytes, void *dest)
+{
+	int ret, i;
+	u16 *buf = dest;
+
+	BUG_ON(bytes % 2);
+	BUG_ON(bytes <= 0);
+
+	ret = wm831x->read_dev(wm831x, reg, bytes, dest);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < bytes / 2; i++) {
+		buf[i] = be16_to_cpu(buf[i]);
+
+		dev_vdbg(wm831x->dev, "Read %04x from R%d(0x%x)\n",
+			 buf[i], reg + i, reg + i);
+	}
+
+	return 0;
+}
+
+/**
+ * wm831x_reg_read: Read a single WM831x register.
+ *
+ * @wm831x: Device to read from.
+ * @reg: Register to read.
+ */
+int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg)
+{
+	unsigned short val;
+	int ret;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_read(wm831x, reg, 2, &val);
+
+	mutex_unlock(&wm831x->io_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return val;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_read);
+
+/**
+ * wm831x_bulk_read: Read multiple WM831x registers
+ *
+ * @wm831x: Device to read from
+ * @reg: First register
+ * @count: Number of registers
+ * @buf: Buffer to fill.
+ */
+int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
+		     int count, u16 *buf)
+{
+	int ret;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_read(wm831x, reg, count * 2, buf);
+
+	mutex_unlock(&wm831x->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_bulk_read);
+
+static int wm831x_write(struct wm831x *wm831x, unsigned short reg,
+			int bytes, void *src)
+{
+	u16 *buf = src;
+	int i;
+
+	BUG_ON(bytes % 2);
+	BUG_ON(bytes <= 0);
+
+	for (i = 0; i < bytes / 2; i++) {
+		if (wm831x_reg_locked(wm831x, reg))
+			return -EPERM;
+
+		dev_vdbg(wm831x->dev, "Write %04x to R%d(0x%x)\n",
+			 buf[i], reg + i, reg + i);
+
+		buf[i] = cpu_to_be16(buf[i]);
+	}
+
+	return wm831x->write_dev(wm831x, reg, bytes, src);
+}
+
+/**
+ * wm831x_reg_write: Write a single WM831x register.
+ *
+ * @wm831x: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ */
+int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
+		     unsigned short val)
+{
+	int ret;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_write(wm831x, reg, 2, &val);
+
+	mutex_unlock(&wm831x->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_write);
+
+/**
+ * wm831x_set_bits: Set the value of a bitfield in a WM831x register
+ *
+ * @wm831x: Device to write to.
+ * @reg: Register to write to.
+ * @mask: Mask of bits to set.
+ * @val: Value to set (unshifted)
+ */
+int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
+		    unsigned short mask, unsigned short val)
+{
+	int ret;
+	u16 r;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_read(wm831x, reg, 2, &r);
+	if (ret < 0)
+		goto out;
+
+	r &= ~mask;
+	r |= val;
+
+	ret = wm831x_write(wm831x, reg, 2, &r);
+
+out:
+	mutex_unlock(&wm831x->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_set_bits);
+
+/**
+ * wm831x_auxadc_read: Read a value from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+	int tries = 10;
+	int ret, src;
+
+	mutex_lock(&wm831x->auxadc_lock);
+
+	ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+			      WM831X_AUX_ENA, WM831X_AUX_ENA);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
+		goto out;
+	}
+
+	/* We force a single source at present */
+	src = input;
+	ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
+			       1 << src);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
+		goto out;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+			      WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
+		goto disable;
+	}
+
+	do {
+		msleep(1);
+
+		ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
+		if (ret < 0)
+			ret = WM831X_AUX_CVT_ENA;
+	} while ((ret & WM831X_AUX_CVT_ENA) && --tries);
+
+	if (ret & WM831X_AUX_CVT_ENA) {
+		dev_err(wm831x->dev, "Timed out reading AUXADC\n");
+		ret = -EBUSY;
+		goto disable;
+	}
+
+	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret);
+	} else {
+		src = ((ret & WM831X_AUX_DATA_SRC_MASK)
+		       >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+		if (src == 14)
+			src = WM831X_AUX_CAL;
+
+		if (src != input) {
+			dev_err(wm831x->dev, "Data from source %d not %d\n",
+				src, input);
+			ret = -EINVAL;
+		} else {
+			ret &= WM831X_AUX_DATA_MASK;
+		}
+	}
+
+disable:
+	wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
+out:
+	mutex_unlock(&wm831x->auxadc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
+
+/**
+ * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+	int ret;
+
+	ret = wm831x_auxadc_read(wm831x, input);
+	if (ret < 0)
+		return ret;
+
+	ret *= 1465;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
+
+static struct resource wm831x_dcdc1_resources[] = {
+	{
+		.start = WM831X_DC1_CONTROL_1,
+		.end   = WM831X_DC1_DVS_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC1,
+		.end   = WM831X_IRQ_UV_DC1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "HC",
+		.start = WM831X_IRQ_HC_DC1,
+		.end   = WM831X_IRQ_HC_DC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct resource wm831x_dcdc2_resources[] = {
+	{
+		.start = WM831X_DC2_CONTROL_1,
+		.end   = WM831X_DC2_DVS_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC2,
+		.end   = WM831X_IRQ_UV_DC2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "HC",
+		.start = WM831X_IRQ_HC_DC2,
+		.end   = WM831X_IRQ_HC_DC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_dcdc3_resources[] = {
+	{
+		.start = WM831X_DC3_CONTROL_1,
+		.end   = WM831X_DC3_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC3,
+		.end   = WM831X_IRQ_UV_DC3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_dcdc4_resources[] = {
+	{
+		.start = WM831X_DC4_CONTROL,
+		.end   = WM831X_DC4_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC4,
+		.end   = WM831X_IRQ_UV_DC4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_gpio_resources[] = {
+	{
+		.start = WM831X_IRQ_GPIO_1,
+		.end   = WM831X_IRQ_GPIO_16,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_isink1_resources[] = {
+	{
+		.start = WM831X_CURRENT_SINK_1,
+		.end   = WM831X_CURRENT_SINK_1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.start = WM831X_IRQ_CS1,
+		.end   = WM831X_IRQ_CS1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_isink2_resources[] = {
+	{
+		.start = WM831X_CURRENT_SINK_2,
+		.end   = WM831X_CURRENT_SINK_2,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.start = WM831X_IRQ_CS2,
+		.end   = WM831X_IRQ_CS2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo1_resources[] = {
+	{
+		.start = WM831X_LDO1_CONTROL,
+		.end   = WM831X_LDO1_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO1,
+		.end   = WM831X_IRQ_UV_LDO1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo2_resources[] = {
+	{
+		.start = WM831X_LDO2_CONTROL,
+		.end   = WM831X_LDO2_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO2,
+		.end   = WM831X_IRQ_UV_LDO2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo3_resources[] = {
+	{
+		.start = WM831X_LDO3_CONTROL,
+		.end   = WM831X_LDO3_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO3,
+		.end   = WM831X_IRQ_UV_LDO3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo4_resources[] = {
+	{
+		.start = WM831X_LDO4_CONTROL,
+		.end   = WM831X_LDO4_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO4,
+		.end   = WM831X_IRQ_UV_LDO4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo5_resources[] = {
+	{
+		.start = WM831X_LDO5_CONTROL,
+		.end   = WM831X_LDO5_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO5,
+		.end   = WM831X_IRQ_UV_LDO5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo6_resources[] = {
+	{
+		.start = WM831X_LDO6_CONTROL,
+		.end   = WM831X_LDO6_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO6,
+		.end   = WM831X_IRQ_UV_LDO6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo7_resources[] = {
+	{
+		.start = WM831X_LDO7_CONTROL,
+		.end   = WM831X_LDO7_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO7,
+		.end   = WM831X_IRQ_UV_LDO7,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo8_resources[] = {
+	{
+		.start = WM831X_LDO8_CONTROL,
+		.end   = WM831X_LDO8_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO8,
+		.end   = WM831X_IRQ_UV_LDO8,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo9_resources[] = {
+	{
+		.start = WM831X_LDO9_CONTROL,
+		.end   = WM831X_LDO9_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO9,
+		.end   = WM831X_IRQ_UV_LDO9,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo10_resources[] = {
+	{
+		.start = WM831X_LDO10_CONTROL,
+		.end   = WM831X_LDO10_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO10,
+		.end   = WM831X_IRQ_UV_LDO10,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo11_resources[] = {
+	{
+		.start = WM831X_LDO11_ON_CONTROL,
+		.end   = WM831X_LDO11_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+};
+
+static struct resource wm831x_on_resources[] = {
+	{
+		.start = WM831X_IRQ_ON,
+		.end   = WM831X_IRQ_ON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct resource wm831x_power_resources[] = {
+	{
+		.name = "SYSLO",
+		.start = WM831X_IRQ_PPM_SYSLO,
+		.end   = WM831X_IRQ_PPM_SYSLO,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "PWR SRC",
+		.start = WM831X_IRQ_PPM_PWR_SRC,
+		.end   = WM831X_IRQ_PPM_PWR_SRC,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "USB CURR",
+		.start = WM831X_IRQ_PPM_USB_CURR,
+		.end   = WM831X_IRQ_PPM_USB_CURR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "BATT HOT",
+		.start = WM831X_IRQ_CHG_BATT_HOT,
+		.end   = WM831X_IRQ_CHG_BATT_HOT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "BATT COLD",
+		.start = WM831X_IRQ_CHG_BATT_COLD,
+		.end   = WM831X_IRQ_CHG_BATT_COLD,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "BATT FAIL",
+		.start = WM831X_IRQ_CHG_BATT_FAIL,
+		.end   = WM831X_IRQ_CHG_BATT_FAIL,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "OV",
+		.start = WM831X_IRQ_CHG_OV,
+		.end   = WM831X_IRQ_CHG_OV,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "END",
+		.start = WM831X_IRQ_CHG_END,
+		.end   = WM831X_IRQ_CHG_END,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "TO",
+		.start = WM831X_IRQ_CHG_TO,
+		.end   = WM831X_IRQ_CHG_TO,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "MODE",
+		.start = WM831X_IRQ_CHG_MODE,
+		.end   = WM831X_IRQ_CHG_MODE,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "START",
+		.start = WM831X_IRQ_CHG_START,
+		.end   = WM831X_IRQ_CHG_START,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_rtc_resources[] = {
+	{
+		.name = "PER",
+		.start = WM831X_IRQ_RTC_PER,
+		.end   = WM831X_IRQ_RTC_PER,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "ALM",
+		.start = WM831X_IRQ_RTC_ALM,
+		.end   = WM831X_IRQ_RTC_ALM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_status1_resources[] = {
+	{
+		.start = WM831X_STATUS_LED_1,
+		.end   = WM831X_STATUS_LED_1,
+		.flags = IORESOURCE_IO,
+	},
+};
+
+static struct resource wm831x_status2_resources[] = {
+	{
+		.start = WM831X_STATUS_LED_2,
+		.end   = WM831X_STATUS_LED_2,
+		.flags = IORESOURCE_IO,
+	},
+};
+
+static struct resource wm831x_touch_resources[] = {
+	{
+		.name = "TCHPD",
+		.start = WM831X_IRQ_TCHPD,
+		.end   = WM831X_IRQ_TCHPD,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "TCHDATA",
+		.start = WM831X_IRQ_TCHDATA,
+		.end   = WM831X_IRQ_TCHDATA,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_wdt_resources[] = {
+	{
+		.start = WM831X_IRQ_WDOG_TO,
+		.end   = WM831X_IRQ_WDOG_TO,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell wm8310_devs[] = {
+	{
+		.name = "wm831x-buckv",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+		.resources = wm831x_dcdc1_resources,
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+		.resources = wm831x_dcdc2_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+		.resources = wm831x_dcdc3_resources,
+	},
+	{
+		.name = "wm831x-boostp",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+		.resources = wm831x_dcdc4_resources,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 1,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 2,
+	},
+	{
+		.name = "wm831x-gpio",
+		.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+		.resources = wm831x_gpio_resources,
+	},
+	{
+		.name = "wm831x-hwmon",
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+		.resources = wm831x_isink1_resources,
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+		.resources = wm831x_isink2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+		.resources = wm831x_ldo1_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+		.resources = wm831x_ldo2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+		.resources = wm831x_ldo3_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+		.resources = wm831x_ldo4_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 5,
+		.num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+		.resources = wm831x_ldo5_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 6,
+		.num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+		.resources = wm831x_ldo6_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 7,
+		.num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+		.resources = wm831x_ldo7_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 8,
+		.num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+		.resources = wm831x_ldo8_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 9,
+		.num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+		.resources = wm831x_ldo9_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 10,
+		.num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+		.resources = wm831x_ldo10_resources,
+	},
+	{
+		.name = "wm831x-alive-ldo",
+		.id = 11,
+		.num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+		.resources = wm831x_ldo11_resources,
+	},
+	{
+		.name = "wm831x-on",
+		.num_resources = ARRAY_SIZE(wm831x_on_resources),
+		.resources = wm831x_on_resources,
+	},
+	{
+		.name = "wm831x-power",
+		.num_resources = ARRAY_SIZE(wm831x_power_resources),
+		.resources = wm831x_power_resources,
+	},
+	{
+		.name = "wm831x-rtc",
+		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+		.resources = wm831x_rtc_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_status1_resources),
+		.resources = wm831x_status1_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_status2_resources),
+		.resources = wm831x_status2_resources,
+	},
+	{
+		.name = "wm831x-watchdog",
+		.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+		.resources = wm831x_wdt_resources,
+	},
+};
+
+static struct mfd_cell wm8311_devs[] = {
+	{
+		.name = "wm831x-buckv",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+		.resources = wm831x_dcdc1_resources,
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+		.resources = wm831x_dcdc2_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+		.resources = wm831x_dcdc3_resources,
+	},
+	{
+		.name = "wm831x-boostp",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+		.resources = wm831x_dcdc4_resources,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 1,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 2,
+	},
+	{
+		.name = "wm831x-gpio",
+		.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+		.resources = wm831x_gpio_resources,
+	},
+	{
+		.name = "wm831x-hwmon",
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+		.resources = wm831x_isink1_resources,
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+		.resources = wm831x_isink2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+		.resources = wm831x_ldo1_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+		.resources = wm831x_ldo2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+		.resources = wm831x_ldo3_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+		.resources = wm831x_ldo4_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 5,
+		.num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+		.resources = wm831x_ldo5_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 7,
+		.num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+		.resources = wm831x_ldo7_resources,
+	},
+	{
+		.name = "wm831x-alive-ldo",
+		.id = 11,
+		.num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+		.resources = wm831x_ldo11_resources,
+	},
+	{
+		.name = "wm831x-on",
+		.num_resources = ARRAY_SIZE(wm831x_on_resources),
+		.resources = wm831x_on_resources,
+	},
+	{
+		.name = "wm831x-power",
+		.num_resources = ARRAY_SIZE(wm831x_power_resources),
+		.resources = wm831x_power_resources,
+	},
+	{
+		.name = "wm831x-rtc",
+		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+		.resources = wm831x_rtc_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_status1_resources),
+		.resources = wm831x_status1_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_status2_resources),
+		.resources = wm831x_status2_resources,
+	},
+	{
+		.name = "wm831x-touch",
+		.num_resources = ARRAY_SIZE(wm831x_touch_resources),
+		.resources = wm831x_touch_resources,
+	},
+	{
+		.name = "wm831x-watchdog",
+		.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+		.resources = wm831x_wdt_resources,
+	},
+};
+
+static struct mfd_cell wm8312_devs[] = {
+	{
+		.name = "wm831x-buckv",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+		.resources = wm831x_dcdc1_resources,
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+		.resources = wm831x_dcdc2_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+		.resources = wm831x_dcdc3_resources,
+	},
+	{
+		.name = "wm831x-boostp",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+		.resources = wm831x_dcdc4_resources,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 1,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 2,
+	},
+	{
+		.name = "wm831x-gpio",
+		.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+		.resources = wm831x_gpio_resources,
+	},
+	{
+		.name = "wm831x-hwmon",
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+		.resources = wm831x_isink1_resources,
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+		.resources = wm831x_isink2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+		.resources = wm831x_ldo1_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+		.resources = wm831x_ldo2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+		.resources = wm831x_ldo3_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+		.resources = wm831x_ldo4_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 5,
+		.num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+		.resources = wm831x_ldo5_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 6,
+		.num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+		.resources = wm831x_ldo6_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 7,
+		.num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+		.resources = wm831x_ldo7_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 8,
+		.num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+		.resources = wm831x_ldo8_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 9,
+		.num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+		.resources = wm831x_ldo9_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 10,
+		.num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+		.resources = wm831x_ldo10_resources,
+	},
+	{
+		.name = "wm831x-alive-ldo",
+		.id = 11,
+		.num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+		.resources = wm831x_ldo11_resources,
+	},
+	{
+		.name = "wm831x-on",
+		.num_resources = ARRAY_SIZE(wm831x_on_resources),
+		.resources = wm831x_on_resources,
+	},
+	{
+		.name = "wm831x-power",
+		.num_resources = ARRAY_SIZE(wm831x_power_resources),
+		.resources = wm831x_power_resources,
+	},
+	{
+		.name = "wm831x-rtc",
+		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+		.resources = wm831x_rtc_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_status1_resources),
+		.resources = wm831x_status1_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_status2_resources),
+		.resources = wm831x_status2_resources,
+	},
+	{
+		.name = "wm831x-touch",
+		.num_resources = ARRAY_SIZE(wm831x_touch_resources),
+		.resources = wm831x_touch_resources,
+	},
+	{
+		.name = "wm831x-watchdog",
+		.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+		.resources = wm831x_wdt_resources,
+	},
+};
+
+static struct mfd_cell backlight_devs[] = {
+	{
+		.name = "wm831x-backlight",
+	},
+};
+
+/*
+ * Instantiate the generic non-control parts of the device.
+ */
+static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
+{
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int rev;
+	enum wm831x_parent parent;
+	int ret;
+
+	mutex_init(&wm831x->io_lock);
+	mutex_init(&wm831x->key_lock);
+	mutex_init(&wm831x->auxadc_lock);
+	dev_set_drvdata(wm831x->dev, wm831x);
+
+	ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret);
+		goto err;
+	}
+	if (ret != 0x6204) {
+		dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = wm831x_reg_read(wm831x, WM831X_REVISION);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read revision: %d\n", ret);
+		goto err;
+	}
+	rev = (ret & WM831X_PARENT_REV_MASK) >> WM831X_PARENT_REV_SHIFT;
+
+	ret = wm831x_reg_read(wm831x, WM831X_RESET_ID);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read device ID: %d\n", ret);
+		goto err;
+	}
+
+	switch (ret) {
+	case 0x8310:
+		parent = WM8310;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM8310 revision %c\n",
+				 'A' + rev);
+			break;
+		}
+		break;
+
+	case 0x8311:
+		parent = WM8311;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM8311 revision %c\n",
+				 'A' + rev);
+			break;
+		}
+		break;
+
+	case 0x8312:
+		parent = WM8312;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM8312 revision %c\n",
+				 'A' + rev);
+			break;
+		}
+		break;
+
+	case 0:
+		/* Some engineering samples do not have the ID set,
+		 * rely on the device being registered correctly.
+		 * This will need revisiting for future devices with
+		 * multiple dies.
+		 */
+		parent = id;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM831%d ES revision %c\n",
+				 parent, 'A' + rev);
+			break;
+		}
+		break;
+
+	default:
+		dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* This will need revisiting in future but is OK for all
+	 * current parts.
+	 */
+	if (parent != id)
+		dev_warn(wm831x->dev, "Device was registered as a WM831%lu\n",
+			 id);
+
+	/* Bootstrap the user key */
+	ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read security key: %d\n", ret);
+		goto err;
+	}
+	if (ret != 0) {
+		dev_warn(wm831x->dev, "Security key had non-zero value %x\n",
+			 ret);
+		wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0);
+	}
+	wm831x->locked = 1;
+
+	if (pdata && pdata->pre_init) {
+		ret = pdata->pre_init(wm831x);
+		if (ret != 0) {
+			dev_err(wm831x->dev, "pre_init() failed: %d\n", ret);
+			goto err;
+		}
+	}
+
+	ret = wm831x_irq_init(wm831x, irq);
+	if (ret != 0)
+		goto err;
+
+	/* The core device is up, instantiate the subdevices. */
+	switch (parent) {
+	case WM8310:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8310_devs, ARRAY_SIZE(wm8310_devs),
+				      NULL, 0);
+		break;
+
+	case WM8311:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8311_devs, ARRAY_SIZE(wm8311_devs),
+				      NULL, 0);
+		break;
+
+	case WM8312:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8312_devs, ARRAY_SIZE(wm8312_devs),
+				      NULL, 0);
+		break;
+
+	default:
+		/* If this happens the bus probe function is buggy */
+		BUG();
+	}
+
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to add children\n");
+		goto err_irq;
+	}
+
+	if (pdata && pdata->backlight) {
+		/* Treat errors as non-critical */
+		ret = mfd_add_devices(wm831x->dev, -1, backlight_devs,
+				      ARRAY_SIZE(backlight_devs), NULL, 0);
+		if (ret < 0)
+			dev_err(wm831x->dev, "Failed to add backlight: %d\n",
+				ret);
+	}
+
+	wm831x_otp_init(wm831x);
+
+	if (pdata && pdata->post_init) {
+		ret = pdata->post_init(wm831x);
+		if (ret != 0) {
+			dev_err(wm831x->dev, "post_init() failed: %d\n", ret);
+			goto err_irq;
+		}
+	}
+
+	return 0;
+
+err_irq:
+	wm831x_irq_exit(wm831x);
+err:
+	mfd_remove_devices(wm831x->dev);
+	kfree(wm831x);
+	return ret;
+}
+
+static void wm831x_device_exit(struct wm831x *wm831x)
+{
+	wm831x_otp_exit(wm831x);
+	mfd_remove_devices(wm831x->dev);
+	wm831x_irq_exit(wm831x);
+	kfree(wm831x);
+}
+
+static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg,
+				  int bytes, void *dest)
+{
+	struct i2c_client *i2c = wm831x->control_data;
+	int ret;
+	u16 r = cpu_to_be16(reg);
+
+	ret = i2c_master_send(i2c, (unsigned char *)&r, 2);
+	if (ret < 0)
+		return ret;
+	if (ret != 2)
+		return -EIO;
+
+	ret = i2c_master_recv(i2c, dest, bytes);
+	if (ret < 0)
+		return ret;
+	if (ret != bytes)
+		return -EIO;
+	return 0;
+}
+
+/* Currently we allocate the write buffer on the stack; this is OK for
+ * small writes - if we need to do large writes this will need to be
+ * revised.
+ */
+static int wm831x_i2c_write_device(struct wm831x *wm831x, unsigned short reg,
+				   int bytes, void *src)
+{
+	struct i2c_client *i2c = wm831x->control_data;
+	unsigned char msg[bytes + 2];
+	int ret;
+
+	reg = cpu_to_be16(reg);
+	memcpy(&msg[0], &reg, 2);
+	memcpy(&msg[2], src, bytes);
+
+	ret = i2c_master_send(i2c, msg, bytes + 2);
+	if (ret < 0)
+		return ret;
+	if (ret < bytes + 2)
+		return -EIO;
+
+	return 0;
+}
+
+static int wm831x_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm831x *wm831x;
+
+	wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL);
+	if (wm831x == NULL) {
+		kfree(i2c);
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c, wm831x);
+	wm831x->dev = &i2c->dev;
+	wm831x->control_data = i2c;
+	wm831x->read_dev = wm831x_i2c_read_device;
+	wm831x->write_dev = wm831x_i2c_write_device;
+
+	return wm831x_device_init(wm831x, id->driver_data, i2c->irq);
+}
+
+static int wm831x_i2c_remove(struct i2c_client *i2c)
+{
+	struct wm831x *wm831x = i2c_get_clientdata(i2c);
+
+	wm831x_device_exit(wm831x);
+
+	return 0;
+}
+
+static const struct i2c_device_id wm831x_i2c_id[] = {
+	{ "wm8310", WM8310 },
+	{ "wm8311", WM8311 },
+	{ "wm8312", WM8312 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
+
+
+static struct i2c_driver wm831x_i2c_driver = {
+	.driver = {
+		   .name = "wm831x",
+		   .owner = THIS_MODULE,
+	},
+	.probe = wm831x_i2c_probe,
+	.remove = wm831x_i2c_remove,
+	.id_table = wm831x_i2c_id,
+};
+
+static int __init wm831x_i2c_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm831x_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register wm831x I2C driver: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(wm831x_i2c_init);
+
+static void __exit wm831x_i2c_exit(void)
+{
+	i2c_del_driver(&wm831x_i2c_driver);
+}
+module_exit(wm831x_i2c_exit);
+
+MODULE_DESCRIPTION("I2C support for the WM831X AudioPlus PMIC");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown");
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
new file mode 100644
index 000000000000..d3015dfb9134
--- /dev/null
+++ b/drivers/mfd/wm831x-irq.c
@@ -0,0 +1,559 @@
+/*
+ * wm831x-irq.c  --  Interrupt controller support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+
+#include <linux/delay.h>
+
+/*
+ * Since generic IRQs don't currently support interrupt controllers on
+ * interrupt driven buses we don't use genirq but instead provide an
+ * interface that looks very much like the standard ones.  This leads
+ * to some bodges, including storing interrupt handler information in
+ * the static irq_data table we use to look up the data for individual
+ * interrupts, but hopefully won't last too long.
+ */
+
+struct wm831x_irq_data {
+	int primary;
+	int reg;
+	int mask;
+	irq_handler_t handler;
+	void *handler_data;
+};
+
+static struct wm831x_irq_data wm831x_irqs[] = {
+	[WM831X_IRQ_TEMP_THW] = {
+		.primary = WM831X_TEMP_INT,
+		.reg = 1,
+		.mask = WM831X_TEMP_THW_EINT,
+	},
+	[WM831X_IRQ_GPIO_1] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP1_EINT,
+	},
+	[WM831X_IRQ_GPIO_2] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP2_EINT,
+	},
+	[WM831X_IRQ_GPIO_3] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP3_EINT,
+	},
+	[WM831X_IRQ_GPIO_4] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP4_EINT,
+	},
+	[WM831X_IRQ_GPIO_5] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP5_EINT,
+	},
+	[WM831X_IRQ_GPIO_6] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP6_EINT,
+	},
+	[WM831X_IRQ_GPIO_7] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP7_EINT,
+	},
+	[WM831X_IRQ_GPIO_8] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP8_EINT,
+	},
+	[WM831X_IRQ_GPIO_9] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP9_EINT,
+	},
+	[WM831X_IRQ_GPIO_10] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP10_EINT,
+	},
+	[WM831X_IRQ_GPIO_11] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP11_EINT,
+	},
+	[WM831X_IRQ_GPIO_12] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP12_EINT,
+	},
+	[WM831X_IRQ_GPIO_13] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP13_EINT,
+	},
+	[WM831X_IRQ_GPIO_14] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP14_EINT,
+	},
+	[WM831X_IRQ_GPIO_15] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP15_EINT,
+	},
+	[WM831X_IRQ_GPIO_16] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP16_EINT,
+	},
+	[WM831X_IRQ_ON] = {
+		.primary = WM831X_ON_PIN_INT,
+		.reg = 1,
+		.mask = WM831X_ON_PIN_EINT,
+	},
+	[WM831X_IRQ_PPM_SYSLO] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_SYSLO_EINT,
+	},
+	[WM831X_IRQ_PPM_PWR_SRC] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_PWR_SRC_EINT,
+	},
+	[WM831X_IRQ_PPM_USB_CURR] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_USB_CURR_EINT,
+	},
+	[WM831X_IRQ_WDOG_TO] = {
+		.primary = WM831X_WDOG_INT,
+		.reg = 1,
+		.mask = WM831X_WDOG_TO_EINT,
+	},
+	[WM831X_IRQ_RTC_PER] = {
+		.primary = WM831X_RTC_INT,
+		.reg = 1,
+		.mask = WM831X_RTC_PER_EINT,
+	},
+	[WM831X_IRQ_RTC_ALM] = {
+		.primary = WM831X_RTC_INT,
+		.reg = 1,
+		.mask = WM831X_RTC_ALM_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_HOT] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_HOT_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_COLD] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_COLD_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_FAIL] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_FAIL_EINT,
+	},
+	[WM831X_IRQ_CHG_OV] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_OV_EINT,
+	},
+	[WM831X_IRQ_CHG_END] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_END_EINT,
+	},
+	[WM831X_IRQ_CHG_TO] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_TO_EINT,
+	},
+	[WM831X_IRQ_CHG_MODE] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_MODE_EINT,
+	},
+	[WM831X_IRQ_CHG_START] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_START_EINT,
+	},
+	[WM831X_IRQ_TCHDATA] = {
+		.primary = WM831X_TCHDATA_INT,
+		.reg = 1,
+		.mask = WM831X_TCHDATA_EINT,
+	},
+	[WM831X_IRQ_TCHPD] = {
+		.primary = WM831X_TCHPD_INT,
+		.reg = 1,
+		.mask = WM831X_TCHPD_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DATA] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DATA_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP1] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP1_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP2] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP2_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP3] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP3_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP4] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP4_EINT,
+	},
+	[WM831X_IRQ_CS1] = {
+		.primary = WM831X_CS_INT,
+		.reg = 2,
+		.mask = WM831X_CS1_EINT,
+	},
+	[WM831X_IRQ_CS2] = {
+		.primary = WM831X_CS_INT,
+		.reg = 2,
+		.mask = WM831X_CS2_EINT,
+	},
+	[WM831X_IRQ_HC_DC1] = {
+		.primary = WM831X_HC_INT,
+		.reg = 4,
+		.mask = WM831X_HC_DC1_EINT,
+	},
+	[WM831X_IRQ_HC_DC2] = {
+		.primary = WM831X_HC_INT,
+		.reg = 4,
+		.mask = WM831X_HC_DC2_EINT,
+	},
+	[WM831X_IRQ_UV_LDO1] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO1_EINT,
+	},
+	[WM831X_IRQ_UV_LDO2] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO2_EINT,
+	},
+	[WM831X_IRQ_UV_LDO3] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO3_EINT,
+	},
+	[WM831X_IRQ_UV_LDO4] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO4_EINT,
+	},
+	[WM831X_IRQ_UV_LDO5] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO5_EINT,
+	},
+	[WM831X_IRQ_UV_LDO6] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO6_EINT,
+	},
+	[WM831X_IRQ_UV_LDO7] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO7_EINT,
+	},
+	[WM831X_IRQ_UV_LDO8] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO8_EINT,
+	},
+	[WM831X_IRQ_UV_LDO9] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO9_EINT,
+	},
+	[WM831X_IRQ_UV_LDO10] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO10_EINT,
+	},
+	[WM831X_IRQ_UV_DC1] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC1_EINT,
+	},
+	[WM831X_IRQ_UV_DC2] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC2_EINT,
+	},
+	[WM831X_IRQ_UV_DC3] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC3_EINT,
+	},
+	[WM831X_IRQ_UV_DC4] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC4_EINT,
+	},
+};
+
+static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
+{
+	return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
+}
+
+static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
+{
+	return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
+}
+
+static void __wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask;
+	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+			 wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+	mutex_lock(&wm831x->irq_lock);
+	__wm831x_enable_irq(wm831x, irq);
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_enable_irq);
+
+static void __wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask;
+	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+			 wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+	mutex_lock(&wm831x->irq_lock);
+	__wm831x_disable_irq(wm831x, irq);
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_disable_irq);
+
+int wm831x_request_irq(struct wm831x *wm831x,
+		       unsigned int irq, irq_handler_t handler,
+		       unsigned long flags, const char *name,
+		       void *dev)
+{
+	int ret = 0;
+
+	if (irq < 0 || irq >= WM831X_NUM_IRQS)
+		return -EINVAL;
+
+	mutex_lock(&wm831x->irq_lock);
+
+	if (wm831x_irqs[irq].handler) {
+		dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	wm831x_irqs[irq].handler = handler;
+	wm831x_irqs[irq].handler_data = dev;
+
+	__wm831x_enable_irq(wm831x, irq);
+
+out:
+	mutex_unlock(&wm831x->irq_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_request_irq);
+
+void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data)
+{
+	if (irq < 0 || irq >= WM831X_NUM_IRQS)
+		return;
+
+	mutex_lock(&wm831x->irq_lock);
+
+	wm831x_irqs[irq].handler = NULL;
+	wm831x_irqs[irq].handler_data = NULL;
+
+	__wm831x_disable_irq(wm831x, irq);
+
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_free_irq);
+
+
+static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	if (irq_data->handler) {
+		irq_data->handler(irq, irq_data->handler_data);
+		wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data),
+				 irq_data->mask);
+	} else {
+		dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq);
+		__wm831x_disable_irq(wm831x, irq);
+	}
+}
+
+/* Main interrupt handling occurs in a workqueue since we need
+ * interrupts enabled to interact with the chip. */
+static void wm831x_irq_worker(struct work_struct *work)
+{
+	struct wm831x *wm831x = container_of(work, struct wm831x, irq_work);
+	unsigned int i;
+	int primary;
+	int status_regs[5];
+	int read[5] = { 0 };
+	int *status;
+
+	primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
+	if (primary < 0) {
+		dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
+			primary);
+		goto out;
+	}
+
+	mutex_lock(&wm831x->irq_lock);
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
+		int offset = wm831x_irqs[i].reg - 1;
+
+		if (!(primary & wm831x_irqs[i].primary))
+			continue;
+
+		status = &status_regs[offset];
+
+		/* Hopefully there should only be one register to read
+		 * each time otherwise we ought to do a block read. */
+		if (!read[offset]) {
+			*status = wm831x_reg_read(wm831x,
+				     irq_data_to_status_reg(&wm831x_irqs[i]));
+			if (*status < 0) {
+				dev_err(wm831x->dev,
+					"Failed to read IRQ status: %d\n",
+					*status);
+				goto out_lock;
+			}
+
+			/* Mask out the disabled IRQs */
+			*status &= ~wm831x->irq_masks[offset];
+			read[offset] = 1;
+		}
+
+		if (*status & wm831x_irqs[i].mask)
+			wm831x_handle_irq(wm831x, i, *status);
+	}
+
+out_lock:
+	mutex_unlock(&wm831x->irq_lock);
+out:
+	enable_irq(wm831x->irq);
+}
+
+
+static irqreturn_t wm831x_cpu_irq(int irq, void *data)
+{
+	struct wm831x *wm831x = data;
+
+	/* Shut the interrupt to the CPU up and schedule the actual
+	 * handler; we can't check that the IRQ is asserted. */
+	disable_irq_nosync(irq);
+
+	queue_work(wm831x->irq_wq, &wm831x->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+int wm831x_irq_init(struct wm831x *wm831x, int irq)
+{
+	int i, ret;
+
+	if (!irq) {
+		dev_warn(wm831x->dev,
+			 "No interrupt specified - functionality limited\n");
+		return 0;
+	}
+
+
+	wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq");
+	if (!wm831x->irq_wq) {
+		dev_err(wm831x->dev, "Failed to allocate IRQ worker\n");
+		return -ESRCH;
+	}
+
+	wm831x->irq = irq;
+	mutex_init(&wm831x->irq_lock);
+	INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
+
+	/* Mask the individual interrupt sources */
+	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) {
+		wm831x->irq_masks[i] = 0xffff;
+		wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
+				 0xffff);
+	}
+
+	/* Enable top level interrupts, we mask at secondary level */
+	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
+
+	/* We're good to go.  We set IRQF_SHARED since there's a
+	 * chance the driver will interoperate with another driver but
+	 * the need to disable the IRQ while handing via I2C/SPI means
+	 * that this may break and performance will be impacted.  If
+	 * this does happen it's a hardware design issue and the only
+	 * other alternative would be polling.
+	 */
+	ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED,
+			  "wm831x", wm831x);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
+			irq, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void wm831x_irq_exit(struct wm831x *wm831x)
+{
+	if (wm831x->irq)
+		free_irq(wm831x->irq, wm831x);
+}
diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c
new file mode 100644
index 000000000000..f742745ff354
--- /dev/null
+++ b/drivers/mfd/wm831x-otp.c
@@ -0,0 +1,83 @@
+/*
+ * wm831x-otp.c  --  OTP for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/otp.h>
+
+/* In bytes */
+#define WM831X_UNIQUE_ID_LEN 16
+
+/* Read the unique ID from the chip into id */
+static int wm831x_unique_id_read(struct wm831x *wm831x, char *id)
+{
+	int i, val;
+
+	for (i = 0; i < WM831X_UNIQUE_ID_LEN / 2; i++) {
+		val = wm831x_reg_read(wm831x, WM831X_UNIQUE_ID_1 + i);
+		if (val < 0)
+			return val;
+
+		id[i * 2]       = (val >> 8) & 0xff;
+		id[(i * 2) + 1] = val & 0xff;
+	}
+
+	return 0;
+}
+
+static ssize_t wm831x_unique_id_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct wm831x *wm831x = dev_get_drvdata(dev);
+	int i, rval;
+	char id[WM831X_UNIQUE_ID_LEN];
+	ssize_t ret = 0;
+
+	rval = wm831x_unique_id_read(wm831x, id);
+	if (rval < 0)
+		return 0;
+
+	for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++)
+		ret += sprintf(&buf[ret], "%02x", buf[i]);
+
+	ret += sprintf(&buf[ret], "\n");
+
+	return ret;
+}
+
+static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL);
+
+int wm831x_otp_init(struct wm831x *wm831x)
+{
+	int ret;
+
+	ret = device_create_file(wm831x->dev, &dev_attr_unique_id);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Unique ID attribute not created: %d\n",
+			ret);
+
+	return ret;
+}
+
+void wm831x_otp_exit(struct wm831x *wm831x)
+{
+	device_remove_file(wm831x->dev, &dev_attr_unique_id);
+}
+
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index fe24079387c5..ba27c9dc1ad3 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -353,15 +353,15 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
 }
 
 /*
- * wm8350_irq_worker actually handles the interrupts.  Since all
+ * This is a threaded IRQ handler so can access I2C/SPI.  Since all
  * interrupts are clear on read the IRQ line will be reasserted and
  * the physical IRQ will be handled again if another interrupt is
  * asserted while we run - in the normal course of events this is a
  * rare occurrence so we save I2C/SPI reads.
  */
-static void wm8350_irq_worker(struct work_struct *work)
+static irqreturn_t wm8350_irq(int irq, void *data)
 {
-	struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work);
+	struct wm8350 *wm8350 = data;
 	u16 level_one, status1, status2, comp;
 
 	/* TODO: Use block reads to improve performance? */
@@ -552,16 +552,6 @@ static void wm8350_irq_worker(struct work_struct *work)
 		}
 	}
 
-	enable_irq(wm8350->chip_irq);
-}
-
-static irqreturn_t wm8350_irq(int irq, void *data)
-{
-	struct wm8350 *wm8350 = data;
-
-	disable_irq_nosync(irq);
-	schedule_work(&wm8350->irq_work);
-
 	return IRQ_HANDLED;
 }
 
@@ -1428,9 +1418,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
-	INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
 	if (irq) {
-		int flags = 0;
+		int flags = IRQF_ONESHOT;
 
 		if (pdata && pdata->irq_high) {
 			flags |= IRQF_TRIGGER_HIGH;
@@ -1444,8 +1433,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 					  WM8350_IRQ_POL);
 		}
 
-		ret = request_irq(irq, wm8350_irq, flags,
-				  "wm8350", wm8350);
+		ret = request_threaded_irq(irq, NULL, wm8350_irq, flags,
+					   "wm8350", wm8350);
 		if (ret != 0) {
 			dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
 				ret);
@@ -1472,6 +1461,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 				   &(wm8350->codec.pdev));
 	wm8350_client_dev_register(wm8350, "wm8350-gpio",
 				   &(wm8350->gpio.pdev));
+	wm8350_client_dev_register(wm8350, "wm8350-hwmon",
+				   &(wm8350->hwmon.pdev));
 	wm8350_client_dev_register(wm8350, "wm8350-power",
 				   &(wm8350->power.pdev));
 	wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
@@ -1498,11 +1489,11 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 	platform_device_unregister(wm8350->wdt.pdev);
 	platform_device_unregister(wm8350->rtc.pdev);
 	platform_device_unregister(wm8350->power.pdev);
+	platform_device_unregister(wm8350->hwmon.pdev);
 	platform_device_unregister(wm8350->gpio.pdev);
 	platform_device_unregister(wm8350->codec.pdev);
 
 	free_irq(wm8350->chip_irq, wm8350);
-	flush_work(&wm8350->irq_work);
 	kfree(wm8350->reg_cache);
 }
 EXPORT_SYMBOL_GPL(wm8350_device_exit);
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 915a3b495da5..8b70e03f939f 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -279,7 +279,7 @@ xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part)
 	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
 
 	dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags="
-		"0x%lx\n", XPC_PARTID(part), chctl.all_flags);
+		"0x%llx\n", XPC_PARTID(part), chctl.all_flags);
 
 	xpc_wakeup_channel_mgr(part);
 }
@@ -615,7 +615,8 @@ xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa,
 	s64 status;
 	enum xp_retval ret;
 
-	status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len);
+	status = sn_partition_reserved_page_pa((u64)buf, cookie,
+			(u64 *)rp_pa, (u64 *)len);
 	if (status == SALRET_OK)
 		ret = xpSuccess;
 	else if (status == SALRET_MORE_PASSES)
@@ -777,8 +778,8 @@ xpc_get_remote_heartbeat_sn2(struct xpc_partition *part)
 	if (ret != xpSuccess)
 		return ret;
 
-	dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, "
-		"heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part),
+	dev_dbg(xpc_part, "partid=%d, heartbeat=%lld, last_heartbeat=%lld, "
+		"heartbeat_offline=%lld, HB_mask[0]=0x%lx\n", XPC_PARTID(part),
 		remote_vars->heartbeat, part->last_heartbeat,
 		remote_vars->heartbeat_offline,
 		remote_vars->heartbeating_to_mask[0]);
@@ -940,7 +941,7 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
 		part_sn2->remote_vars_pa);
 
 	part->last_heartbeat = remote_vars->heartbeat - 1;
-	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
+	dev_dbg(xpc_part, "  last_heartbeat = 0x%016llx\n",
 		part->last_heartbeat);
 
 	part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa;
@@ -1029,7 +1030,8 @@ xpc_identify_activate_IRQ_req_sn2(int nasid)
 	part->activate_IRQ_rcvd++;
 
 	dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
-		"%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd,
+		"%lld:0x%lx\n", (int)nasid, (int)partid,
+		part->activate_IRQ_rcvd,
 		remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]);
 
 	if (xpc_partition_disengaged(part) &&
@@ -1129,7 +1131,7 @@ xpc_identify_activate_IRQ_sender_sn2(void)
 		do {
 			n_IRQs_detected++;
 			nasid = (l * BITS_PER_LONG + b) * 2;
-			dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid);
+			dev_dbg(xpc_part, "interrupt from nasid %lld\n", nasid);
 			xpc_identify_activate_IRQ_req_sn2(nasid);
 
 			b = find_next_bit(&nasid_mask_long, BITS_PER_LONG,
@@ -1386,7 +1388,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part)
 
 		if (pulled_entry->magic != 0) {
 			dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
-				"partition %d has bad magic value (=0x%lx)\n",
+				"partition %d has bad magic value (=0x%llx)\n",
 				partid, sn_partition_id, pulled_entry->magic);
 			return xpBadMagic;
 		}
@@ -1730,14 +1732,14 @@ xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put)
 
 		if (notify->func != NULL) {
 			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p "
-				"msg_number=%ld partid=%d channel=%d\n",
+				"msg_number=%lld partid=%d channel=%d\n",
 				(void *)notify, get, ch->partid, ch->number);
 
 			notify->func(reason, ch->partid, ch->number,
 				     notify->key);
 
 			dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p"
-				" msg_number=%ld partid=%d channel=%d\n",
+				" msg_number=%lld partid=%d channel=%d\n",
 				(void *)notify, get, ch->partid, ch->number);
 		}
 	}
@@ -1858,7 +1860,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
 
 		ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get;
 
-		dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
+		dev_dbg(xpc_chan, "w_remote_GP.get changed to %lld, partid=%d, "
 			"channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid,
 			ch->number);
 
@@ -1885,7 +1887,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
 		smp_wmb(); /* ensure flags have been cleared before bte_copy */
 		ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
 
-		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
+		dev_dbg(xpc_chan, "w_remote_GP.put changed to %lld, partid=%d, "
 			"channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid,
 			ch->number);
 
@@ -1943,7 +1945,7 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get)
 		if (ret != xpSuccess) {
 
 			dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
-				" msg %ld from partition %d, channel=%d, "
+				" msg %lld from partition %d, channel=%d, "
 				"ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull,
 				ch->partid, ch->number, ret);
 
@@ -1995,7 +1997,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
 		if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) {
 			/* we got the entry referenced by get */
 
-			dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
+			dev_dbg(xpc_chan, "w_local_GP.get changed to %lld, "
 				"partid=%d, channel=%d\n", get + 1,
 				ch->partid, ch->number);
 
@@ -2062,7 +2064,7 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put)
 
 		/* we just set the new value of local_GP->put */
 
-		dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
+		dev_dbg(xpc_chan, "local_GP->put changed to %lld, partid=%d, "
 			"channel=%d\n", put, ch->partid, ch->number);
 
 		send_msgrequest = 1;
@@ -2147,8 +2149,8 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
 	DBUG_ON(msg->flags != 0);
 	msg->number = put;
 
-	dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
-		"msg_number=%ld, partid=%d, channel=%d\n", put + 1,
+	dev_dbg(xpc_chan, "w_local_GP.put changed to %lld; msg=0x%p, "
+		"msg_number=%lld, partid=%d, channel=%d\n", put + 1,
 		(void *)msg, msg->number, ch->partid, ch->number);
 
 	*address_of_msg = msg;
@@ -2296,7 +2298,7 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
 
 		/* we just set the new value of local_GP->get */
 
-		dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
+		dev_dbg(xpc_chan, "local_GP->get changed to %lld, partid=%d, "
 			"channel=%d\n", get, ch->partid, ch->number);
 
 		send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT);
@@ -2323,7 +2325,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
 	msg = container_of(payload, struct xpc_msg_sn2, payload);
 	msg_number = msg->number;
 
-	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
+	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%lld, partid=%d, channel=%d\n",
 		(void *)msg, msg_number, ch->partid, ch->number);
 
 	DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) !=
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 782994ead0e8..005b91f096f2 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -63,7 +63,7 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 {
 	struct nand_chip *this = mtd->priv;
 
-	omap_writew(0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+	omap_writew(0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
 	omap_writew(byte, this->IO_ADDR_W);
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0);
 	ndelay(40);
@@ -78,7 +78,7 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
 
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0);
 	ndelay(40);
-	omap_writew(~0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+	omap_writew(~0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
 	res = omap_readw(this->IO_ADDR_R);
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE,
 			       AMS_DELTA_LATCH2_NAND_NRE);
@@ -178,8 +178,8 @@ static int __init ams_delta_init(void)
 	ams_delta_mtd->priv = this;
 
 	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = (OMAP_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
-	this->IO_ADDR_W = (OMAP_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
+	this->IO_ADDR_R = (OMAP1_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
+	this->IO_ADDR_W = (OMAP1_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
 	this->read_byte = ams_delta_read_byte;
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 507569a4f232..ed5741b2e701 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1934,6 +1934,15 @@ config XILINX_EMACLITE
 	help
 	  This driver supports the 10/100 Ethernet Lite from Xilinx.
 
+config BCM63XX_ENET
+	tristate "Broadcom 63xx internal mac support"
+	depends on BCM63XX
+	select MII
+	select PHYLIB
+	help
+	  This driver supports the ethernet MACs in the Broadcom 63xx
+	  MIPS chipset family (BCM63XX).
+
 source "drivers/net/fs_enet/Kconfig"
 
 endif # NET_ETHERNET
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 99ae6d7fe6a9..ae8cd30f13d6 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_B44) += b44.o
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
 obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
 obj-$(CONFIG_AX88796) += ax88796.o
+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
 
 obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h
index ba48220df16a..490d3b38e0cb 100644
--- a/drivers/net/atl1e/atl1e.h
+++ b/drivers/net/atl1e/atl1e.h
@@ -377,10 +377,19 @@ struct atl1e_hw {
  */
 struct atl1e_tx_buffer {
 	struct sk_buff *skb;
+	u16 flags;
+#define ATL1E_TX_PCIMAP_SINGLE		0x0001
+#define ATL1E_TX_PCIMAP_PAGE		0x0002
+#define ATL1E_TX_PCIMAP_TYPE_MASK	0x0003
 	u16 length;
 	dma_addr_t dma;
 };
 
+#define ATL1E_SET_PCIMAP_TYPE(tx_buff, type) do {		\
+	((tx_buff)->flags) &= ~ATL1E_TX_PCIMAP_TYPE_MASK;	\
+	((tx_buff)->flags) |= (type);				\
+	} while (0)
+
 struct atl1e_rx_page {
 	dma_addr_t	dma;    /* receive rage DMA address */
 	u8		*addr;   /* receive rage virtual address */
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 69b830f4b68f..955da733c2ad 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -635,7 +635,11 @@ static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter)
 	for (index = 0; index < ring_count; index++) {
 		tx_buffer = &tx_ring->tx_buffer[index];
 		if (tx_buffer->dma) {
-			pci_unmap_page(pdev, tx_buffer->dma,
+			if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
+				pci_unmap_single(pdev, tx_buffer->dma,
+					tx_buffer->length, PCI_DMA_TODEVICE);
+			else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
+				pci_unmap_page(pdev, tx_buffer->dma,
 					tx_buffer->length, PCI_DMA_TODEVICE);
 			tx_buffer->dma = 0;
 		}
@@ -1220,7 +1224,11 @@ static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter)
 	while (next_to_clean != hw_next_to_clean) {
 		tx_buffer = &tx_ring->tx_buffer[next_to_clean];
 		if (tx_buffer->dma) {
-			pci_unmap_page(adapter->pdev, tx_buffer->dma,
+			if (tx_buffer->flags & ATL1E_TX_PCIMAP_SINGLE)
+				pci_unmap_single(adapter->pdev, tx_buffer->dma,
+					tx_buffer->length, PCI_DMA_TODEVICE);
+			else if (tx_buffer->flags & ATL1E_TX_PCIMAP_PAGE)
+				pci_unmap_page(adapter->pdev, tx_buffer->dma,
 					tx_buffer->length, PCI_DMA_TODEVICE);
 			tx_buffer->dma = 0;
 		}
@@ -1741,6 +1749,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
 		tx_buffer->length = map_len;
 		tx_buffer->dma = pci_map_single(adapter->pdev,
 					skb->data, hdr_len, PCI_DMA_TODEVICE);
+		ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
 		mapped_len += map_len;
 		use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
 		use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
@@ -1766,6 +1775,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
 		tx_buffer->dma =
 			pci_map_single(adapter->pdev, skb->data + mapped_len,
 					map_len, PCI_DMA_TODEVICE);
+		ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
 		mapped_len  += map_len;
 		use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
 		use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
@@ -1801,6 +1811,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
 						(i * MAX_TX_BUF_LEN),
 						tx_buffer->length,
 						PCI_DMA_TODEVICE);
+			ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_PAGE);
 			use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
 			use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
 					((cpu_to_le32(tx_buffer->length) &
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 0189dcd36f31..e046943ef29d 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -847,23 +847,22 @@ static int b44_poll(struct napi_struct *napi, int budget)
 {
 	struct b44 *bp = container_of(napi, struct b44, napi);
 	int work_done;
+	unsigned long flags;
 
-	spin_lock_irq(&bp->lock);
+	spin_lock_irqsave(&bp->lock, flags);
 
 	if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
 		/* spin_lock(&bp->tx_lock); */
 		b44_tx(bp);
 		/* spin_unlock(&bp->tx_lock); */
 	}
-	spin_unlock_irq(&bp->lock);
+	spin_unlock_irqrestore(&bp->lock, flags);
 
 	work_done = 0;
 	if (bp->istat & ISTAT_RX)
 		work_done += b44_rx(bp, budget);
 
 	if (bp->istat & ISTAT_ERRORS) {
-		unsigned long flags;
-
 		spin_lock_irqsave(&bp->lock, flags);
 		b44_halt(bp);
 		b44_init_rings(bp);
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
new file mode 100644
index 000000000000..09d270913c50
--- /dev/null
+++ b/drivers/net/bcm63xx_enet.c
@@ -0,0 +1,1971 @@
+/*
+ * Driver for BCM963xx builtin Ethernet mac
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/if_vlan.h>
+
+#include <bcm63xx_dev_enet.h>
+#include "bcm63xx_enet.h"
+
+static char bcm_enet_driver_name[] = "bcm63xx_enet";
+static char bcm_enet_driver_version[] = "1.0";
+
+static int copybreak __read_mostly = 128;
+module_param(copybreak, int, 0);
+MODULE_PARM_DESC(copybreak, "Receive copy threshold");
+
+/* io memory shared between all devices */
+static void __iomem *bcm_enet_shared_base;
+
+/*
+ * io helpers to access mac registers
+ */
+static inline u32 enet_readl(struct bcm_enet_priv *priv, u32 off)
+{
+	return bcm_readl(priv->base + off);
+}
+
+static inline void enet_writel(struct bcm_enet_priv *priv,
+			       u32 val, u32 off)
+{
+	bcm_writel(val, priv->base + off);
+}
+
+/*
+ * io helpers to access shared registers
+ */
+static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off)
+{
+	return bcm_readl(bcm_enet_shared_base + off);
+}
+
+static inline void enet_dma_writel(struct bcm_enet_priv *priv,
+				       u32 val, u32 off)
+{
+	bcm_writel(val, bcm_enet_shared_base + off);
+}
+
+/*
+ * write given data into mii register and wait for transfer to end
+ * with timeout (average measured transfer time is 25us)
+ */
+static int do_mdio_op(struct bcm_enet_priv *priv, unsigned int data)
+{
+	int limit;
+
+	/* make sure mii interrupt status is cleared */
+	enet_writel(priv, ENET_IR_MII, ENET_IR_REG);
+
+	enet_writel(priv, data, ENET_MIIDATA_REG);
+	wmb();
+
+	/* busy wait on mii interrupt bit, with timeout */
+	limit = 1000;
+	do {
+		if (enet_readl(priv, ENET_IR_REG) & ENET_IR_MII)
+			break;
+		udelay(1);
+	} while (limit-- >= 0);
+
+	return (limit < 0) ? 1 : 0;
+}
+
+/*
+ * MII internal read callback
+ */
+static int bcm_enet_mdio_read(struct bcm_enet_priv *priv, int mii_id,
+			      int regnum)
+{
+	u32 tmp, val;
+
+	tmp = regnum << ENET_MIIDATA_REG_SHIFT;
+	tmp |= 0x2 << ENET_MIIDATA_TA_SHIFT;
+	tmp |= mii_id << ENET_MIIDATA_PHYID_SHIFT;
+	tmp |= ENET_MIIDATA_OP_READ_MASK;
+
+	if (do_mdio_op(priv, tmp))
+		return -1;
+
+	val = enet_readl(priv, ENET_MIIDATA_REG);
+	val &= 0xffff;
+	return val;
+}
+
+/*
+ * MII internal write callback
+ */
+static int bcm_enet_mdio_write(struct bcm_enet_priv *priv, int mii_id,
+			       int regnum, u16 value)
+{
+	u32 tmp;
+
+	tmp = (value & 0xffff) << ENET_MIIDATA_DATA_SHIFT;
+	tmp |= 0x2 << ENET_MIIDATA_TA_SHIFT;
+	tmp |= regnum << ENET_MIIDATA_REG_SHIFT;
+	tmp |= mii_id << ENET_MIIDATA_PHYID_SHIFT;
+	tmp |= ENET_MIIDATA_OP_WRITE_MASK;
+
+	(void)do_mdio_op(priv, tmp);
+	return 0;
+}
+
+/*
+ * MII read callback from phylib
+ */
+static int bcm_enet_mdio_read_phylib(struct mii_bus *bus, int mii_id,
+				     int regnum)
+{
+	return bcm_enet_mdio_read(bus->priv, mii_id, regnum);
+}
+
+/*
+ * MII write callback from phylib
+ */
+static int bcm_enet_mdio_write_phylib(struct mii_bus *bus, int mii_id,
+				      int regnum, u16 value)
+{
+	return bcm_enet_mdio_write(bus->priv, mii_id, regnum, value);
+}
+
+/*
+ * MII read callback from mii core
+ */
+static int bcm_enet_mdio_read_mii(struct net_device *dev, int mii_id,
+				  int regnum)
+{
+	return bcm_enet_mdio_read(netdev_priv(dev), mii_id, regnum);
+}
+
+/*
+ * MII write callback from mii core
+ */
+static void bcm_enet_mdio_write_mii(struct net_device *dev, int mii_id,
+				    int regnum, int value)
+{
+	bcm_enet_mdio_write(netdev_priv(dev), mii_id, regnum, value);
+}
+
+/*
+ * refill rx queue
+ */
+static int bcm_enet_refill_rx(struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+
+	while (priv->rx_desc_count < priv->rx_ring_size) {
+		struct bcm_enet_desc *desc;
+		struct sk_buff *skb;
+		dma_addr_t p;
+		int desc_idx;
+		u32 len_stat;
+
+		desc_idx = priv->rx_dirty_desc;
+		desc = &priv->rx_desc_cpu[desc_idx];
+
+		if (!priv->rx_skb[desc_idx]) {
+			skb = netdev_alloc_skb(dev, priv->rx_skb_size);
+			if (!skb)
+				break;
+			priv->rx_skb[desc_idx] = skb;
+
+			p = dma_map_single(&priv->pdev->dev, skb->data,
+					   priv->rx_skb_size,
+					   DMA_FROM_DEVICE);
+			desc->address = p;
+		}
+
+		len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
+		len_stat |= DMADESC_OWNER_MASK;
+		if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
+			len_stat |= DMADESC_WRAP_MASK;
+			priv->rx_dirty_desc = 0;
+		} else {
+			priv->rx_dirty_desc++;
+		}
+		wmb();
+		desc->len_stat = len_stat;
+
+		priv->rx_desc_count++;
+
+		/* tell dma engine we allocated one buffer */
+		enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
+	}
+
+	/* If rx ring is still empty, set a timer to try allocating
+	 * again at a later time. */
+	if (priv->rx_desc_count == 0 && netif_running(dev)) {
+		dev_warn(&priv->pdev->dev, "unable to refill rx ring\n");
+		priv->rx_timeout.expires = jiffies + HZ;
+		add_timer(&priv->rx_timeout);
+	}
+
+	return 0;
+}
+
+/*
+ * timer callback to defer refill rx queue in case we're OOM
+ */
+static void bcm_enet_refill_rx_timer(unsigned long data)
+{
+	struct net_device *dev;
+	struct bcm_enet_priv *priv;
+
+	dev = (struct net_device *)data;
+	priv = netdev_priv(dev);
+
+	spin_lock(&priv->rx_lock);
+	bcm_enet_refill_rx((struct net_device *)data);
+	spin_unlock(&priv->rx_lock);
+}
+
+/*
+ * extract packet from rx queue
+ */
+static int bcm_enet_receive_queue(struct net_device *dev, int budget)
+{
+	struct bcm_enet_priv *priv;
+	struct device *kdev;
+	int processed;
+
+	priv = netdev_priv(dev);
+	kdev = &priv->pdev->dev;
+	processed = 0;
+
+	/* don't scan ring further than number of refilled
+	 * descriptor */
+	if (budget > priv->rx_desc_count)
+		budget = priv->rx_desc_count;
+
+	do {
+		struct bcm_enet_desc *desc;
+		struct sk_buff *skb;
+		int desc_idx;
+		u32 len_stat;
+		unsigned int len;
+
+		desc_idx = priv->rx_curr_desc;
+		desc = &priv->rx_desc_cpu[desc_idx];
+
+		/* make sure we actually read the descriptor status at
+		 * each loop */
+		rmb();
+
+		len_stat = desc->len_stat;
+
+		/* break if dma ownership belongs to hw */
+		if (len_stat & DMADESC_OWNER_MASK)
+			break;
+
+		processed++;
+		priv->rx_curr_desc++;
+		if (priv->rx_curr_desc == priv->rx_ring_size)
+			priv->rx_curr_desc = 0;
+		priv->rx_desc_count--;
+
+		/* if the packet does not have start of packet _and_
+		 * end of packet flag set, then just recycle it */
+		if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) {
+			priv->stats.rx_dropped++;
+			continue;
+		}
+
+		/* recycle packet if it's marked as bad */
+		if (unlikely(len_stat & DMADESC_ERR_MASK)) {
+			priv->stats.rx_errors++;
+
+			if (len_stat & DMADESC_OVSIZE_MASK)
+				priv->stats.rx_length_errors++;
+			if (len_stat & DMADESC_CRC_MASK)
+				priv->stats.rx_crc_errors++;
+			if (len_stat & DMADESC_UNDER_MASK)
+				priv->stats.rx_frame_errors++;
+			if (len_stat & DMADESC_OV_MASK)
+				priv->stats.rx_fifo_errors++;
+			continue;
+		}
+
+		/* valid packet */
+		skb = priv->rx_skb[desc_idx];
+		len = (len_stat & DMADESC_LENGTH_MASK) >> DMADESC_LENGTH_SHIFT;
+		/* don't include FCS */
+		len -= 4;
+
+		if (len < copybreak) {
+			struct sk_buff *nskb;
+
+			nskb = netdev_alloc_skb(dev, len + NET_IP_ALIGN);
+			if (!nskb) {
+				/* forget packet, just rearm desc */
+				priv->stats.rx_dropped++;
+				continue;
+			}
+
+			/* since we're copying the data, we can align
+			 * them properly */
+			skb_reserve(nskb, NET_IP_ALIGN);
+			dma_sync_single_for_cpu(kdev, desc->address,
+						len, DMA_FROM_DEVICE);
+			memcpy(nskb->data, skb->data, len);
+			dma_sync_single_for_device(kdev, desc->address,
+						   len, DMA_FROM_DEVICE);
+			skb = nskb;
+		} else {
+			dma_unmap_single(&priv->pdev->dev, desc->address,
+					 priv->rx_skb_size, DMA_FROM_DEVICE);
+			priv->rx_skb[desc_idx] = NULL;
+		}
+
+		skb_put(skb, len);
+		skb->dev = dev;
+		skb->protocol = eth_type_trans(skb, dev);
+		priv->stats.rx_packets++;
+		priv->stats.rx_bytes += len;
+		dev->last_rx = jiffies;
+		netif_receive_skb(skb);
+
+	} while (--budget > 0);
+
+	if (processed || !priv->rx_desc_count) {
+		bcm_enet_refill_rx(dev);
+
+		/* kick rx dma */
+		enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
+				ENETDMA_CHANCFG_REG(priv->rx_chan));
+	}
+
+	return processed;
+}
+
+
+/*
+ * try to or force reclaim of transmitted buffers
+ */
+static int bcm_enet_tx_reclaim(struct net_device *dev, int force)
+{
+	struct bcm_enet_priv *priv;
+	int released;
+
+	priv = netdev_priv(dev);
+	released = 0;
+
+	while (priv->tx_desc_count < priv->tx_ring_size) {
+		struct bcm_enet_desc *desc;
+		struct sk_buff *skb;
+
+		/* We run in a bh and fight against start_xmit, which
+		 * is called with bh disabled  */
+		spin_lock(&priv->tx_lock);
+
+		desc = &priv->tx_desc_cpu[priv->tx_dirty_desc];
+
+		if (!force && (desc->len_stat & DMADESC_OWNER_MASK)) {
+			spin_unlock(&priv->tx_lock);
+			break;
+		}
+
+		/* ensure other field of the descriptor were not read
+		 * before we checked ownership */
+		rmb();
+
+		skb = priv->tx_skb[priv->tx_dirty_desc];
+		priv->tx_skb[priv->tx_dirty_desc] = NULL;
+		dma_unmap_single(&priv->pdev->dev, desc->address, skb->len,
+				 DMA_TO_DEVICE);
+
+		priv->tx_dirty_desc++;
+		if (priv->tx_dirty_desc == priv->tx_ring_size)
+			priv->tx_dirty_desc = 0;
+		priv->tx_desc_count++;
+
+		spin_unlock(&priv->tx_lock);
+
+		if (desc->len_stat & DMADESC_UNDER_MASK)
+			priv->stats.tx_errors++;
+
+		dev_kfree_skb(skb);
+		released++;
+	}
+
+	if (netif_queue_stopped(dev) && released)
+		netif_wake_queue(dev);
+
+	return released;
+}
+
+/*
+ * poll func, called by network core
+ */
+static int bcm_enet_poll(struct napi_struct *napi, int budget)
+{
+	struct bcm_enet_priv *priv;
+	struct net_device *dev;
+	int tx_work_done, rx_work_done;
+
+	priv = container_of(napi, struct bcm_enet_priv, napi);
+	dev = priv->net_dev;
+
+	/* ack interrupts */
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IR_REG(priv->rx_chan));
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IR_REG(priv->tx_chan));
+
+	/* reclaim sent skb */
+	tx_work_done = bcm_enet_tx_reclaim(dev, 0);
+
+	spin_lock(&priv->rx_lock);
+	rx_work_done = bcm_enet_receive_queue(dev, budget);
+	spin_unlock(&priv->rx_lock);
+
+	if (rx_work_done >= budget || tx_work_done > 0) {
+		/* rx/tx queue is not yet empty/clean */
+		return rx_work_done;
+	}
+
+	/* no more packet in rx/tx queue, remove device from poll
+	 * queue */
+	napi_complete(napi);
+
+	/* restore rx/tx interrupt */
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IRMASK_REG(priv->rx_chan));
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IRMASK_REG(priv->tx_chan));
+
+	return rx_work_done;
+}
+
+/*
+ * mac interrupt handler
+ */
+static irqreturn_t bcm_enet_isr_mac(int irq, void *dev_id)
+{
+	struct net_device *dev;
+	struct bcm_enet_priv *priv;
+	u32 stat;
+
+	dev = dev_id;
+	priv = netdev_priv(dev);
+
+	stat = enet_readl(priv, ENET_IR_REG);
+	if (!(stat & ENET_IR_MIB))
+		return IRQ_NONE;
+
+	/* clear & mask interrupt */
+	enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
+	enet_writel(priv, 0, ENET_IRMASK_REG);
+
+	/* read mib registers in workqueue */
+	schedule_work(&priv->mib_update_task);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * rx/tx dma interrupt handler
+ */
+static irqreturn_t bcm_enet_isr_dma(int irq, void *dev_id)
+{
+	struct net_device *dev;
+	struct bcm_enet_priv *priv;
+
+	dev = dev_id;
+	priv = netdev_priv(dev);
+
+	/* mask rx/tx interrupts */
+	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
+
+	napi_schedule(&priv->napi);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * tx request callback
+ */
+static int bcm_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+	struct bcm_enet_desc *desc;
+	u32 len_stat;
+	int ret;
+
+	priv = netdev_priv(dev);
+
+	/* lock against tx reclaim */
+	spin_lock(&priv->tx_lock);
+
+	/* make sure  the tx hw queue  is not full,  should not happen
+	 * since we stop queue before it's the case */
+	if (unlikely(!priv->tx_desc_count)) {
+		netif_stop_queue(dev);
+		dev_err(&priv->pdev->dev, "xmit called with no tx desc "
+			"available?\n");
+		ret = NETDEV_TX_BUSY;
+		goto out_unlock;
+	}
+
+	/* point to the next available desc */
+	desc = &priv->tx_desc_cpu[priv->tx_curr_desc];
+	priv->tx_skb[priv->tx_curr_desc] = skb;
+
+	/* fill descriptor */
+	desc->address = dma_map_single(&priv->pdev->dev, skb->data, skb->len,
+				       DMA_TO_DEVICE);
+
+	len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
+	len_stat |= DMADESC_ESOP_MASK |
+		DMADESC_APPEND_CRC |
+		DMADESC_OWNER_MASK;
+
+	priv->tx_curr_desc++;
+	if (priv->tx_curr_desc == priv->tx_ring_size) {
+		priv->tx_curr_desc = 0;
+		len_stat |= DMADESC_WRAP_MASK;
+	}
+	priv->tx_desc_count--;
+
+	/* dma might be already polling, make sure we update desc
+	 * fields in correct order */
+	wmb();
+	desc->len_stat = len_stat;
+	wmb();
+
+	/* kick tx dma */
+	enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
+			ENETDMA_CHANCFG_REG(priv->tx_chan));
+
+	/* stop queue if no more desc available */
+	if (!priv->tx_desc_count)
+		netif_stop_queue(dev);
+
+	priv->stats.tx_bytes += skb->len;
+	priv->stats.tx_packets++;
+	dev->trans_start = jiffies;
+	ret = NETDEV_TX_OK;
+
+out_unlock:
+	spin_unlock(&priv->tx_lock);
+	return ret;
+}
+
+/*
+ * Change the interface's mac address.
+ */
+static int bcm_enet_set_mac_address(struct net_device *dev, void *p)
+{
+	struct bcm_enet_priv *priv;
+	struct sockaddr *addr = p;
+	u32 val;
+
+	priv = netdev_priv(dev);
+	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+
+	/* use perfect match register 0 to store my mac address */
+	val = (dev->dev_addr[2] << 24) | (dev->dev_addr[3] << 16) |
+		(dev->dev_addr[4] << 8) | dev->dev_addr[5];
+	enet_writel(priv, val, ENET_PML_REG(0));
+
+	val = (dev->dev_addr[0] << 8 | dev->dev_addr[1]);
+	val |= ENET_PMH_DATAVALID_MASK;
+	enet_writel(priv, val, ENET_PMH_REG(0));
+
+	return 0;
+}
+
+/*
+ * Change rx mode (promiscous/allmulti) and update multicast list
+ */
+static void bcm_enet_set_multicast_list(struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+	struct dev_mc_list *mc_list;
+	u32 val;
+	int i;
+
+	priv = netdev_priv(dev);
+
+	val = enet_readl(priv, ENET_RXCFG_REG);
+
+	if (dev->flags & IFF_PROMISC)
+		val |= ENET_RXCFG_PROMISC_MASK;
+	else
+		val &= ~ENET_RXCFG_PROMISC_MASK;
+
+	/* only 3 perfect match registers left, first one is used for
+	 * own mac address */
+	if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 3)
+		val |= ENET_RXCFG_ALLMCAST_MASK;
+	else
+		val &= ~ENET_RXCFG_ALLMCAST_MASK;
+
+	/* no need to set perfect match registers if we catch all
+	 * multicast */
+	if (val & ENET_RXCFG_ALLMCAST_MASK) {
+		enet_writel(priv, val, ENET_RXCFG_REG);
+		return;
+	}
+
+	for (i = 0, mc_list = dev->mc_list;
+	     (mc_list != NULL) && (i < dev->mc_count) && (i < 3);
+	     i++, mc_list = mc_list->next) {
+		u8 *dmi_addr;
+		u32 tmp;
+
+		/* filter non ethernet address */
+		if (mc_list->dmi_addrlen != 6)
+			continue;
+
+		/* update perfect match registers */
+		dmi_addr = mc_list->dmi_addr;
+		tmp = (dmi_addr[2] << 24) | (dmi_addr[3] << 16) |
+			(dmi_addr[4] << 8) | dmi_addr[5];
+		enet_writel(priv, tmp, ENET_PML_REG(i + 1));
+
+		tmp = (dmi_addr[0] << 8 | dmi_addr[1]);
+		tmp |= ENET_PMH_DATAVALID_MASK;
+		enet_writel(priv, tmp, ENET_PMH_REG(i + 1));
+	}
+
+	for (; i < 3; i++) {
+		enet_writel(priv, 0, ENET_PML_REG(i + 1));
+		enet_writel(priv, 0, ENET_PMH_REG(i + 1));
+	}
+
+	enet_writel(priv, val, ENET_RXCFG_REG);
+}
+
+/*
+ * set mac duplex parameters
+ */
+static void bcm_enet_set_duplex(struct bcm_enet_priv *priv, int fullduplex)
+{
+	u32 val;
+
+	val = enet_readl(priv, ENET_TXCTL_REG);
+	if (fullduplex)
+		val |= ENET_TXCTL_FD_MASK;
+	else
+		val &= ~ENET_TXCTL_FD_MASK;
+	enet_writel(priv, val, ENET_TXCTL_REG);
+}
+
+/*
+ * set mac flow control parameters
+ */
+static void bcm_enet_set_flow(struct bcm_enet_priv *priv, int rx_en, int tx_en)
+{
+	u32 val;
+
+	/* rx flow control (pause frame handling) */
+	val = enet_readl(priv, ENET_RXCFG_REG);
+	if (rx_en)
+		val |= ENET_RXCFG_ENFLOW_MASK;
+	else
+		val &= ~ENET_RXCFG_ENFLOW_MASK;
+	enet_writel(priv, val, ENET_RXCFG_REG);
+
+	/* tx flow control (pause frame generation) */
+	val = enet_dma_readl(priv, ENETDMA_CFG_REG);
+	if (tx_en)
+		val |= ENETDMA_CFG_FLOWCH_MASK(priv->rx_chan);
+	else
+		val &= ~ENETDMA_CFG_FLOWCH_MASK(priv->rx_chan);
+	enet_dma_writel(priv, val, ENETDMA_CFG_REG);
+}
+
+/*
+ * link changed callback (from phylib)
+ */
+static void bcm_enet_adjust_phy_link(struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+	struct phy_device *phydev;
+	int status_changed;
+
+	priv = netdev_priv(dev);
+	phydev = priv->phydev;
+	status_changed = 0;
+
+	if (priv->old_link != phydev->link) {
+		status_changed = 1;
+		priv->old_link = phydev->link;
+	}
+
+	/* reflect duplex change in mac configuration */
+	if (phydev->link && phydev->duplex != priv->old_duplex) {
+		bcm_enet_set_duplex(priv,
+				    (phydev->duplex == DUPLEX_FULL) ? 1 : 0);
+		status_changed = 1;
+		priv->old_duplex = phydev->duplex;
+	}
+
+	/* enable flow control if remote advertise it (trust phylib to
+	 * check that duplex is full */
+	if (phydev->link && phydev->pause != priv->old_pause) {
+		int rx_pause_en, tx_pause_en;
+
+		if (phydev->pause) {
+			/* pause was advertised by lpa and us */
+			rx_pause_en = 1;
+			tx_pause_en = 1;
+		} else if (!priv->pause_auto) {
+			/* pause setting overrided by user */
+			rx_pause_en = priv->pause_rx;
+			tx_pause_en = priv->pause_tx;
+		} else {
+			rx_pause_en = 0;
+			tx_pause_en = 0;
+		}
+
+		bcm_enet_set_flow(priv, rx_pause_en, tx_pause_en);
+		status_changed = 1;
+		priv->old_pause = phydev->pause;
+	}
+
+	if (status_changed) {
+		pr_info("%s: link %s", dev->name, phydev->link ?
+			"UP" : "DOWN");
+		if (phydev->link)
+			pr_cont(" - %d/%s - flow control %s", phydev->speed,
+			       DUPLEX_FULL == phydev->duplex ? "full" : "half",
+			       phydev->pause == 1 ? "rx&tx" : "off");
+
+		pr_cont("\n");
+	}
+}
+
+/*
+ * link changed callback (if phylib is not used)
+ */
+static void bcm_enet_adjust_link(struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+	bcm_enet_set_duplex(priv, priv->force_duplex_full);
+	bcm_enet_set_flow(priv, priv->pause_rx, priv->pause_tx);
+	netif_carrier_on(dev);
+
+	pr_info("%s: link forced UP - %d/%s - flow control %s/%s\n",
+		dev->name,
+		priv->force_speed_100 ? 100 : 10,
+		priv->force_duplex_full ? "full" : "half",
+		priv->pause_rx ? "rx" : "off",
+		priv->pause_tx ? "tx" : "off");
+}
+
+/*
+ * open callback, allocate dma rings & buffers and start rx operation
+ */
+static int bcm_enet_open(struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+	struct sockaddr addr;
+	struct device *kdev;
+	struct phy_device *phydev;
+	int i, ret;
+	unsigned int size;
+	char phy_id[MII_BUS_ID_SIZE + 3];
+	void *p;
+	u32 val;
+
+	priv = netdev_priv(dev);
+	kdev = &priv->pdev->dev;
+
+	if (priv->has_phy) {
+		/* connect to PHY */
+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+			 priv->mac_id ? "1" : "0", priv->phy_id);
+
+		phydev = phy_connect(dev, phy_id, &bcm_enet_adjust_phy_link, 0,
+				     PHY_INTERFACE_MODE_MII);
+
+		if (IS_ERR(phydev)) {
+			dev_err(kdev, "could not attach to PHY\n");
+			return PTR_ERR(phydev);
+		}
+
+		/* mask with MAC supported features */
+		phydev->supported &= (SUPPORTED_10baseT_Half |
+				      SUPPORTED_10baseT_Full |
+				      SUPPORTED_100baseT_Half |
+				      SUPPORTED_100baseT_Full |
+				      SUPPORTED_Autoneg |
+				      SUPPORTED_Pause |
+				      SUPPORTED_MII);
+		phydev->advertising = phydev->supported;
+
+		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
+			phydev->advertising |= SUPPORTED_Pause;
+		else
+			phydev->advertising &= ~SUPPORTED_Pause;
+
+		dev_info(kdev, "attached PHY at address %d [%s]\n",
+			 phydev->addr, phydev->drv->name);
+
+		priv->old_link = 0;
+		priv->old_duplex = -1;
+		priv->old_pause = -1;
+		priv->phydev = phydev;
+	}
+
+	/* mask all interrupts and request them */
+	enet_writel(priv, 0, ENET_IRMASK_REG);
+	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
+
+	ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
+	if (ret)
+		goto out_phy_disconnect;
+
+	ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
+			  IRQF_SAMPLE_RANDOM | IRQF_DISABLED, dev->name, dev);
+	if (ret)
+		goto out_freeirq;
+
+	ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
+			  IRQF_DISABLED, dev->name, dev);
+	if (ret)
+		goto out_freeirq_rx;
+
+	/* initialize perfect match registers */
+	for (i = 0; i < 4; i++) {
+		enet_writel(priv, 0, ENET_PML_REG(i));
+		enet_writel(priv, 0, ENET_PMH_REG(i));
+	}
+
+	/* write device mac address */
+	memcpy(addr.sa_data, dev->dev_addr, ETH_ALEN);
+	bcm_enet_set_mac_address(dev, &addr);
+
+	/* allocate rx dma ring */
+	size = priv->rx_ring_size * sizeof(struct bcm_enet_desc);
+	p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL);
+	if (!p) {
+		dev_err(kdev, "cannot allocate rx ring %u\n", size);
+		ret = -ENOMEM;
+		goto out_freeirq_tx;
+	}
+
+	memset(p, 0, size);
+	priv->rx_desc_alloc_size = size;
+	priv->rx_desc_cpu = p;
+
+	/* allocate tx dma ring */
+	size = priv->tx_ring_size * sizeof(struct bcm_enet_desc);
+	p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL);
+	if (!p) {
+		dev_err(kdev, "cannot allocate tx ring\n");
+		ret = -ENOMEM;
+		goto out_free_rx_ring;
+	}
+
+	memset(p, 0, size);
+	priv->tx_desc_alloc_size = size;
+	priv->tx_desc_cpu = p;
+
+	priv->tx_skb = kzalloc(sizeof(struct sk_buff *) * priv->tx_ring_size,
+			       GFP_KERNEL);
+	if (!priv->tx_skb) {
+		dev_err(kdev, "cannot allocate rx skb queue\n");
+		ret = -ENOMEM;
+		goto out_free_tx_ring;
+	}
+
+	priv->tx_desc_count = priv->tx_ring_size;
+	priv->tx_dirty_desc = 0;
+	priv->tx_curr_desc = 0;
+	spin_lock_init(&priv->tx_lock);
+
+	/* init & fill rx ring with skbs */
+	priv->rx_skb = kzalloc(sizeof(struct sk_buff *) * priv->rx_ring_size,
+			       GFP_KERNEL);
+	if (!priv->rx_skb) {
+		dev_err(kdev, "cannot allocate rx skb queue\n");
+		ret = -ENOMEM;
+		goto out_free_tx_skb;
+	}
+
+	priv->rx_desc_count = 0;
+	priv->rx_dirty_desc = 0;
+	priv->rx_curr_desc = 0;
+
+	/* initialize flow control buffer allocation */
+	enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
+			ENETDMA_BUFALLOC_REG(priv->rx_chan));
+
+	if (bcm_enet_refill_rx(dev)) {
+		dev_err(kdev, "cannot allocate rx skb queue\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* write rx & tx ring addresses */
+	enet_dma_writel(priv, priv->rx_desc_dma,
+			ENETDMA_RSTART_REG(priv->rx_chan));
+	enet_dma_writel(priv, priv->tx_desc_dma,
+			ENETDMA_RSTART_REG(priv->tx_chan));
+
+	/* clear remaining state ram for rx & tx channel */
+	enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
+
+	/* set max rx/tx length */
+	enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
+	enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
+
+	/* set dma maximum burst len */
+	enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
+			ENETDMA_MAXBURST_REG(priv->rx_chan));
+	enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
+			ENETDMA_MAXBURST_REG(priv->tx_chan));
+
+	/* set correct transmit fifo watermark */
+	enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
+
+	/* set flow control low/high threshold to 1/3 / 2/3 */
+	val = priv->rx_ring_size / 3;
+	enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
+	val = (priv->rx_ring_size * 2) / 3;
+	enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
+
+	/* all set, enable mac and interrupts, start dma engine and
+	 * kick rx dma channel */
+	wmb();
+	enet_writel(priv, ENET_CTL_ENABLE_MASK, ENET_CTL_REG);
+	enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
+	enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
+			ENETDMA_CHANCFG_REG(priv->rx_chan));
+
+	/* watch "mib counters about to overflow" interrupt */
+	enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
+	enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
+
+	/* watch "packet transferred" interrupt in rx and tx */
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IR_REG(priv->rx_chan));
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IR_REG(priv->tx_chan));
+
+	/* make sure we enable napi before rx interrupt  */
+	napi_enable(&priv->napi);
+
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IRMASK_REG(priv->rx_chan));
+	enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
+			ENETDMA_IRMASK_REG(priv->tx_chan));
+
+	if (priv->has_phy)
+		phy_start(priv->phydev);
+	else
+		bcm_enet_adjust_link(dev);
+
+	netif_start_queue(dev);
+	return 0;
+
+out:
+	for (i = 0; i < priv->rx_ring_size; i++) {
+		struct bcm_enet_desc *desc;
+
+		if (!priv->rx_skb[i])
+			continue;
+
+		desc = &priv->rx_desc_cpu[i];
+		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
+				 DMA_FROM_DEVICE);
+		kfree_skb(priv->rx_skb[i]);
+	}
+	kfree(priv->rx_skb);
+
+out_free_tx_skb:
+	kfree(priv->tx_skb);
+
+out_free_tx_ring:
+	dma_free_coherent(kdev, priv->tx_desc_alloc_size,
+			  priv->tx_desc_cpu, priv->tx_desc_dma);
+
+out_free_rx_ring:
+	dma_free_coherent(kdev, priv->rx_desc_alloc_size,
+			  priv->rx_desc_cpu, priv->rx_desc_dma);
+
+out_freeirq_tx:
+	free_irq(priv->irq_tx, dev);
+
+out_freeirq_rx:
+	free_irq(priv->irq_rx, dev);
+
+out_freeirq:
+	free_irq(dev->irq, dev);
+
+out_phy_disconnect:
+	phy_disconnect(priv->phydev);
+
+	return ret;
+}
+
+/*
+ * disable mac
+ */
+static void bcm_enet_disable_mac(struct bcm_enet_priv *priv)
+{
+	int limit;
+	u32 val;
+
+	val = enet_readl(priv, ENET_CTL_REG);
+	val |= ENET_CTL_DISABLE_MASK;
+	enet_writel(priv, val, ENET_CTL_REG);
+
+	limit = 1000;
+	do {
+		u32 val;
+
+		val = enet_readl(priv, ENET_CTL_REG);
+		if (!(val & ENET_CTL_DISABLE_MASK))
+			break;
+		udelay(1);
+	} while (limit--);
+}
+
+/*
+ * disable dma in given channel
+ */
+static void bcm_enet_disable_dma(struct bcm_enet_priv *priv, int chan)
+{
+	int limit;
+
+	enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
+
+	limit = 1000;
+	do {
+		u32 val;
+
+		val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
+		if (!(val & ENETDMA_CHANCFG_EN_MASK))
+			break;
+		udelay(1);
+	} while (limit--);
+}
+
+/*
+ * stop callback
+ */
+static int bcm_enet_stop(struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+	struct device *kdev;
+	int i;
+
+	priv = netdev_priv(dev);
+	kdev = &priv->pdev->dev;
+
+	netif_stop_queue(dev);
+	napi_disable(&priv->napi);
+	if (priv->has_phy)
+		phy_stop(priv->phydev);
+	del_timer_sync(&priv->rx_timeout);
+
+	/* mask all interrupts */
+	enet_writel(priv, 0, ENET_IRMASK_REG);
+	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
+	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
+
+	/* make sure no mib update is scheduled */
+	flush_scheduled_work();
+
+	/* disable dma & mac */
+	bcm_enet_disable_dma(priv, priv->tx_chan);
+	bcm_enet_disable_dma(priv, priv->rx_chan);
+	bcm_enet_disable_mac(priv);
+
+	/* force reclaim of all tx buffers */
+	bcm_enet_tx_reclaim(dev, 1);
+
+	/* free the rx skb ring */
+	for (i = 0; i < priv->rx_ring_size; i++) {
+		struct bcm_enet_desc *desc;
+
+		if (!priv->rx_skb[i])
+			continue;
+
+		desc = &priv->rx_desc_cpu[i];
+		dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
+				 DMA_FROM_DEVICE);
+		kfree_skb(priv->rx_skb[i]);
+	}
+
+	/* free remaining allocated memory */
+	kfree(priv->rx_skb);
+	kfree(priv->tx_skb);
+	dma_free_coherent(kdev, priv->rx_desc_alloc_size,
+			  priv->rx_desc_cpu, priv->rx_desc_dma);
+	dma_free_coherent(kdev, priv->tx_desc_alloc_size,
+			  priv->tx_desc_cpu, priv->tx_desc_dma);
+	free_irq(priv->irq_tx, dev);
+	free_irq(priv->irq_rx, dev);
+	free_irq(dev->irq, dev);
+
+	/* release phy */
+	if (priv->has_phy) {
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
+
+	return 0;
+}
+
+/*
+ * core request to return device rx/tx stats
+ */
+static struct net_device_stats *bcm_enet_get_stats(struct net_device *dev)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+	return &priv->stats;
+}
+
+/*
+ * ethtool callbacks
+ */
+struct bcm_enet_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+	int mib_reg;
+};
+
+#define GEN_STAT(m) sizeof(((struct bcm_enet_priv *)0)->m),		\
+		     offsetof(struct bcm_enet_priv, m)
+
+static const struct bcm_enet_stats bcm_enet_gstrings_stats[] = {
+	{ "rx_packets", GEN_STAT(stats.rx_packets), -1 },
+	{ "tx_packets",	GEN_STAT(stats.tx_packets), -1 },
+	{ "rx_bytes", GEN_STAT(stats.rx_bytes), -1 },
+	{ "tx_bytes", GEN_STAT(stats.tx_bytes), -1 },
+	{ "rx_errors", GEN_STAT(stats.rx_errors), -1 },
+	{ "tx_errors", GEN_STAT(stats.tx_errors), -1 },
+	{ "rx_dropped",	GEN_STAT(stats.rx_dropped), -1 },
+	{ "tx_dropped",	GEN_STAT(stats.tx_dropped), -1 },
+
+	{ "rx_good_octets", GEN_STAT(mib.rx_gd_octets), ETH_MIB_RX_GD_OCTETS},
+	{ "rx_good_pkts", GEN_STAT(mib.rx_gd_pkts), ETH_MIB_RX_GD_PKTS },
+	{ "rx_broadcast", GEN_STAT(mib.rx_brdcast), ETH_MIB_RX_BRDCAST },
+	{ "rx_multicast", GEN_STAT(mib.rx_mult), ETH_MIB_RX_MULT },
+	{ "rx_64_octets", GEN_STAT(mib.rx_64), ETH_MIB_RX_64 },
+	{ "rx_65_127_oct", GEN_STAT(mib.rx_65_127), ETH_MIB_RX_65_127 },
+	{ "rx_128_255_oct", GEN_STAT(mib.rx_128_255), ETH_MIB_RX_128_255 },
+	{ "rx_256_511_oct", GEN_STAT(mib.rx_256_511), ETH_MIB_RX_256_511 },
+	{ "rx_512_1023_oct", GEN_STAT(mib.rx_512_1023), ETH_MIB_RX_512_1023 },
+	{ "rx_1024_max_oct", GEN_STAT(mib.rx_1024_max), ETH_MIB_RX_1024_MAX },
+	{ "rx_jabber", GEN_STAT(mib.rx_jab), ETH_MIB_RX_JAB },
+	{ "rx_oversize", GEN_STAT(mib.rx_ovr), ETH_MIB_RX_OVR },
+	{ "rx_fragment", GEN_STAT(mib.rx_frag), ETH_MIB_RX_FRAG },
+	{ "rx_dropped",	GEN_STAT(mib.rx_drop), ETH_MIB_RX_DROP },
+	{ "rx_crc_align", GEN_STAT(mib.rx_crc_align), ETH_MIB_RX_CRC_ALIGN },
+	{ "rx_undersize", GEN_STAT(mib.rx_und), ETH_MIB_RX_UND },
+	{ "rx_crc", GEN_STAT(mib.rx_crc), ETH_MIB_RX_CRC },
+	{ "rx_align", GEN_STAT(mib.rx_align), ETH_MIB_RX_ALIGN },
+	{ "rx_symbol_error", GEN_STAT(mib.rx_sym), ETH_MIB_RX_SYM },
+	{ "rx_pause", GEN_STAT(mib.rx_pause), ETH_MIB_RX_PAUSE },
+	{ "rx_control", GEN_STAT(mib.rx_cntrl), ETH_MIB_RX_CNTRL },
+
+	{ "tx_good_octets", GEN_STAT(mib.tx_gd_octets), ETH_MIB_TX_GD_OCTETS },
+	{ "tx_good_pkts", GEN_STAT(mib.tx_gd_pkts), ETH_MIB_TX_GD_PKTS },
+	{ "tx_broadcast", GEN_STAT(mib.tx_brdcast), ETH_MIB_TX_BRDCAST },
+	{ "tx_multicast", GEN_STAT(mib.tx_mult), ETH_MIB_TX_MULT },
+	{ "tx_64_oct", GEN_STAT(mib.tx_64), ETH_MIB_TX_64 },
+	{ "tx_65_127_oct", GEN_STAT(mib.tx_65_127), ETH_MIB_TX_65_127 },
+	{ "tx_128_255_oct", GEN_STAT(mib.tx_128_255), ETH_MIB_TX_128_255 },
+	{ "tx_256_511_oct", GEN_STAT(mib.tx_256_511), ETH_MIB_TX_256_511 },
+	{ "tx_512_1023_oct", GEN_STAT(mib.tx_512_1023), ETH_MIB_TX_512_1023},
+	{ "tx_1024_max_oct", GEN_STAT(mib.tx_1024_max), ETH_MIB_TX_1024_MAX },
+	{ "tx_jabber", GEN_STAT(mib.tx_jab), ETH_MIB_TX_JAB },
+	{ "tx_oversize", GEN_STAT(mib.tx_ovr), ETH_MIB_TX_OVR },
+	{ "tx_fragment", GEN_STAT(mib.tx_frag), ETH_MIB_TX_FRAG },
+	{ "tx_underrun", GEN_STAT(mib.tx_underrun), ETH_MIB_TX_UNDERRUN },
+	{ "tx_collisions", GEN_STAT(mib.tx_col), ETH_MIB_TX_COL },
+	{ "tx_single_collision", GEN_STAT(mib.tx_1_col), ETH_MIB_TX_1_COL },
+	{ "tx_multiple_collision", GEN_STAT(mib.tx_m_col), ETH_MIB_TX_M_COL },
+	{ "tx_excess_collision", GEN_STAT(mib.tx_ex_col), ETH_MIB_TX_EX_COL },
+	{ "tx_late_collision", GEN_STAT(mib.tx_late), ETH_MIB_TX_LATE },
+	{ "tx_deferred", GEN_STAT(mib.tx_def), ETH_MIB_TX_DEF },
+	{ "tx_carrier_sense", GEN_STAT(mib.tx_crs), ETH_MIB_TX_CRS },
+	{ "tx_pause", GEN_STAT(mib.tx_pause), ETH_MIB_TX_PAUSE },
+
+};
+
+#define BCM_ENET_STATS_LEN	\
+	(sizeof(bcm_enet_gstrings_stats) / sizeof(struct bcm_enet_stats))
+
+static const u32 unused_mib_regs[] = {
+	ETH_MIB_TX_ALL_OCTETS,
+	ETH_MIB_TX_ALL_PKTS,
+	ETH_MIB_RX_ALL_OCTETS,
+	ETH_MIB_RX_ALL_PKTS,
+};
+
+
+static void bcm_enet_get_drvinfo(struct net_device *netdev,
+				 struct ethtool_drvinfo *drvinfo)
+{
+	strncpy(drvinfo->driver, bcm_enet_driver_name, 32);
+	strncpy(drvinfo->version, bcm_enet_driver_version, 32);
+	strncpy(drvinfo->fw_version, "N/A", 32);
+	strncpy(drvinfo->bus_info, "bcm63xx", 32);
+	drvinfo->n_stats = BCM_ENET_STATS_LEN;
+}
+
+static int bcm_enet_get_stats_count(struct net_device *netdev)
+{
+	return BCM_ENET_STATS_LEN;
+}
+
+static void bcm_enet_get_strings(struct net_device *netdev,
+				 u32 stringset, u8 *data)
+{
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < BCM_ENET_STATS_LEN; i++) {
+			memcpy(data + i * ETH_GSTRING_LEN,
+			       bcm_enet_gstrings_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+		}
+		break;
+	}
+}
+
+static void update_mib_counters(struct bcm_enet_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < BCM_ENET_STATS_LEN; i++) {
+		const struct bcm_enet_stats *s;
+		u32 val;
+		char *p;
+
+		s = &bcm_enet_gstrings_stats[i];
+		if (s->mib_reg == -1)
+			continue;
+
+		val = enet_readl(priv, ENET_MIB_REG(s->mib_reg));
+		p = (char *)priv + s->stat_offset;
+
+		if (s->sizeof_stat == sizeof(u64))
+			*(u64 *)p += val;
+		else
+			*(u32 *)p += val;
+	}
+
+	/* also empty unused mib counters to make sure mib counter
+	 * overflow interrupt is cleared */
+	for (i = 0; i < ARRAY_SIZE(unused_mib_regs); i++)
+		(void)enet_readl(priv, ENET_MIB_REG(unused_mib_regs[i]));
+}
+
+static void bcm_enet_update_mib_counters_defer(struct work_struct *t)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = container_of(t, struct bcm_enet_priv, mib_update_task);
+	mutex_lock(&priv->mib_update_lock);
+	update_mib_counters(priv);
+	mutex_unlock(&priv->mib_update_lock);
+
+	/* reenable mib interrupt */
+	if (netif_running(priv->net_dev))
+		enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
+}
+
+static void bcm_enet_get_ethtool_stats(struct net_device *netdev,
+				       struct ethtool_stats *stats,
+				       u64 *data)
+{
+	struct bcm_enet_priv *priv;
+	int i;
+
+	priv = netdev_priv(netdev);
+
+	mutex_lock(&priv->mib_update_lock);
+	update_mib_counters(priv);
+
+	for (i = 0; i < BCM_ENET_STATS_LEN; i++) {
+		const struct bcm_enet_stats *s;
+		char *p;
+
+		s = &bcm_enet_gstrings_stats[i];
+		p = (char *)priv + s->stat_offset;
+		data[i] = (s->sizeof_stat == sizeof(u64)) ?
+			*(u64 *)p : *(u32 *)p;
+	}
+	mutex_unlock(&priv->mib_update_lock);
+}
+
+static int bcm_enet_get_settings(struct net_device *dev,
+				 struct ethtool_cmd *cmd)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+
+	cmd->maxrxpkt = 0;
+	cmd->maxtxpkt = 0;
+
+	if (priv->has_phy) {
+		if (!priv->phydev)
+			return -ENODEV;
+		return phy_ethtool_gset(priv->phydev, cmd);
+	} else {
+		cmd->autoneg = 0;
+		cmd->speed = (priv->force_speed_100) ? SPEED_100 : SPEED_10;
+		cmd->duplex = (priv->force_duplex_full) ?
+			DUPLEX_FULL : DUPLEX_HALF;
+		cmd->supported = ADVERTISED_10baseT_Half  |
+			ADVERTISED_10baseT_Full |
+			ADVERTISED_100baseT_Half |
+			ADVERTISED_100baseT_Full;
+		cmd->advertising = 0;
+		cmd->port = PORT_MII;
+		cmd->transceiver = XCVR_EXTERNAL;
+	}
+	return 0;
+}
+
+static int bcm_enet_set_settings(struct net_device *dev,
+				 struct ethtool_cmd *cmd)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+	if (priv->has_phy) {
+		if (!priv->phydev)
+			return -ENODEV;
+		return phy_ethtool_sset(priv->phydev, cmd);
+	} else {
+
+		if (cmd->autoneg ||
+		    (cmd->speed != SPEED_100 && cmd->speed != SPEED_10) ||
+		    cmd->port != PORT_MII)
+			return -EINVAL;
+
+		priv->force_speed_100 = (cmd->speed == SPEED_100) ? 1 : 0;
+		priv->force_duplex_full = (cmd->duplex == DUPLEX_FULL) ? 1 : 0;
+
+		if (netif_running(dev))
+			bcm_enet_adjust_link(dev);
+		return 0;
+	}
+}
+
+static void bcm_enet_get_ringparam(struct net_device *dev,
+				   struct ethtool_ringparam *ering)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+
+	/* rx/tx ring is actually only limited by memory */
+	ering->rx_max_pending = 8192;
+	ering->tx_max_pending = 8192;
+	ering->rx_mini_max_pending = 0;
+	ering->rx_jumbo_max_pending = 0;
+	ering->rx_pending = priv->rx_ring_size;
+	ering->tx_pending = priv->tx_ring_size;
+}
+
+static int bcm_enet_set_ringparam(struct net_device *dev,
+				  struct ethtool_ringparam *ering)
+{
+	struct bcm_enet_priv *priv;
+	int was_running;
+
+	priv = netdev_priv(dev);
+
+	was_running = 0;
+	if (netif_running(dev)) {
+		bcm_enet_stop(dev);
+		was_running = 1;
+	}
+
+	priv->rx_ring_size = ering->rx_pending;
+	priv->tx_ring_size = ering->tx_pending;
+
+	if (was_running) {
+		int err;
+
+		err = bcm_enet_open(dev);
+		if (err)
+			dev_close(dev);
+		else
+			bcm_enet_set_multicast_list(dev);
+	}
+	return 0;
+}
+
+static void bcm_enet_get_pauseparam(struct net_device *dev,
+				    struct ethtool_pauseparam *ecmd)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+	ecmd->autoneg = priv->pause_auto;
+	ecmd->rx_pause = priv->pause_rx;
+	ecmd->tx_pause = priv->pause_tx;
+}
+
+static int bcm_enet_set_pauseparam(struct net_device *dev,
+				   struct ethtool_pauseparam *ecmd)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+
+	if (priv->has_phy) {
+		if (ecmd->autoneg && (ecmd->rx_pause != ecmd->tx_pause)) {
+			/* asymetric pause mode not supported,
+			 * actually possible but integrated PHY has RO
+			 * asym_pause bit */
+			return -EINVAL;
+		}
+	} else {
+		/* no pause autoneg on direct mii connection */
+		if (ecmd->autoneg)
+			return -EINVAL;
+	}
+
+	priv->pause_auto = ecmd->autoneg;
+	priv->pause_rx = ecmd->rx_pause;
+	priv->pause_tx = ecmd->tx_pause;
+
+	return 0;
+}
+
+static struct ethtool_ops bcm_enet_ethtool_ops = {
+	.get_strings		= bcm_enet_get_strings,
+	.get_stats_count	= bcm_enet_get_stats_count,
+	.get_ethtool_stats      = bcm_enet_get_ethtool_stats,
+	.get_settings		= bcm_enet_get_settings,
+	.set_settings		= bcm_enet_set_settings,
+	.get_drvinfo		= bcm_enet_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_ringparam		= bcm_enet_get_ringparam,
+	.set_ringparam		= bcm_enet_set_ringparam,
+	.get_pauseparam		= bcm_enet_get_pauseparam,
+	.set_pauseparam		= bcm_enet_set_pauseparam,
+};
+
+static int bcm_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct bcm_enet_priv *priv;
+
+	priv = netdev_priv(dev);
+	if (priv->has_phy) {
+		if (!priv->phydev)
+			return -ENODEV;
+		return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+	} else {
+		struct mii_if_info mii;
+
+		mii.dev = dev;
+		mii.mdio_read = bcm_enet_mdio_read_mii;
+		mii.mdio_write = bcm_enet_mdio_write_mii;
+		mii.phy_id = 0;
+		mii.phy_id_mask = 0x3f;
+		mii.reg_num_mask = 0x1f;
+		return generic_mii_ioctl(&mii, if_mii(rq), cmd, NULL);
+	}
+}
+
+/*
+ * calculate actual hardware mtu
+ */
+static int compute_hw_mtu(struct bcm_enet_priv *priv, int mtu)
+{
+	int actual_mtu;
+
+	actual_mtu = mtu;
+
+	/* add ethernet header + vlan tag size */
+	actual_mtu += VLAN_ETH_HLEN;
+
+	if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
+		return -EINVAL;
+
+	/*
+	 * setup maximum size before we get overflow mark in
+	 * descriptor, note that this will not prevent reception of
+	 * big frames, they will be split into multiple buffers
+	 * anyway
+	 */
+	priv->hw_mtu = actual_mtu;
+
+	/*
+	 * align rx buffer size to dma burst len, account FCS since
+	 * it's appended
+	 */
+	priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
+				  BCMENET_DMA_MAXBURST * 4);
+	return 0;
+}
+
+/*
+ * adjust mtu, can't be called while device is running
+ */
+static int bcm_enet_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int ret;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	ret = compute_hw_mtu(netdev_priv(dev), new_mtu);
+	if (ret)
+		return ret;
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+/*
+ * preinit hardware to allow mii operation while device is down
+ */
+static void bcm_enet_hw_preinit(struct bcm_enet_priv *priv)
+{
+	u32 val;
+	int limit;
+
+	/* make sure mac is disabled */
+	bcm_enet_disable_mac(priv);
+
+	/* soft reset mac */
+	val = ENET_CTL_SRESET_MASK;
+	enet_writel(priv, val, ENET_CTL_REG);
+	wmb();
+
+	limit = 1000;
+	do {
+		val = enet_readl(priv, ENET_CTL_REG);
+		if (!(val & ENET_CTL_SRESET_MASK))
+			break;
+		udelay(1);
+	} while (limit--);
+
+	/* select correct mii interface */
+	val = enet_readl(priv, ENET_CTL_REG);
+	if (priv->use_external_mii)
+		val |= ENET_CTL_EPHYSEL_MASK;
+	else
+		val &= ~ENET_CTL_EPHYSEL_MASK;
+	enet_writel(priv, val, ENET_CTL_REG);
+
+	/* turn on mdc clock */
+	enet_writel(priv, (0x1f << ENET_MIISC_MDCFREQDIV_SHIFT) |
+		    ENET_MIISC_PREAMBLEEN_MASK, ENET_MIISC_REG);
+
+	/* set mib counters to self-clear when read */
+	val = enet_readl(priv, ENET_MIBCTL_REG);
+	val |= ENET_MIBCTL_RDCLEAR_MASK;
+	enet_writel(priv, val, ENET_MIBCTL_REG);
+}
+
+static const struct net_device_ops bcm_enet_ops = {
+	.ndo_open		= bcm_enet_open,
+	.ndo_stop		= bcm_enet_stop,
+	.ndo_start_xmit		= bcm_enet_start_xmit,
+	.ndo_get_stats		= bcm_enet_get_stats,
+	.ndo_set_mac_address	= bcm_enet_set_mac_address,
+	.ndo_set_multicast_list = bcm_enet_set_multicast_list,
+	.ndo_do_ioctl		= bcm_enet_ioctl,
+	.ndo_change_mtu		= bcm_enet_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = bcm_enet_netpoll,
+#endif
+};
+
+/*
+ * allocate netdevice, request register memory and register device.
+ */
+static int __devinit bcm_enet_probe(struct platform_device *pdev)
+{
+	struct bcm_enet_priv *priv;
+	struct net_device *dev;
+	struct bcm63xx_enet_platform_data *pd;
+	struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
+	struct mii_bus *bus;
+	const char *clk_name;
+	unsigned int iomem_size;
+	int i, ret;
+
+	/* stop if shared driver failed, assume driver->probe will be
+	 * called in the same order we register devices (correct ?) */
+	if (!bcm_enet_shared_base)
+		return -ENODEV;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 2);
+	if (!res_mem || !res_irq || !res_irq_rx || !res_irq_tx)
+		return -ENODEV;
+
+	ret = 0;
+	dev = alloc_etherdev(sizeof(*priv));
+	if (!dev)
+		return -ENOMEM;
+	priv = netdev_priv(dev);
+	memset(priv, 0, sizeof(*priv));
+
+	ret = compute_hw_mtu(priv, dev->mtu);
+	if (ret)
+		goto out;
+
+	iomem_size = res_mem->end - res_mem->start + 1;
+	if (!request_mem_region(res_mem->start, iomem_size, "bcm63xx_enet")) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	priv->base = ioremap(res_mem->start, iomem_size);
+	if (priv->base == NULL) {
+		ret = -ENOMEM;
+		goto out_release_mem;
+	}
+	dev->irq = priv->irq = res_irq->start;
+	priv->irq_rx = res_irq_rx->start;
+	priv->irq_tx = res_irq_tx->start;
+	priv->mac_id = pdev->id;
+
+	/* get rx & tx dma channel id for this mac */
+	if (priv->mac_id == 0) {
+		priv->rx_chan = 0;
+		priv->tx_chan = 1;
+		clk_name = "enet0";
+	} else {
+		priv->rx_chan = 2;
+		priv->tx_chan = 3;
+		clk_name = "enet1";
+	}
+
+	priv->mac_clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(priv->mac_clk)) {
+		ret = PTR_ERR(priv->mac_clk);
+		goto out_unmap;
+	}
+	clk_enable(priv->mac_clk);
+
+	/* initialize default and fetch platform data */
+	priv->rx_ring_size = BCMENET_DEF_RX_DESC;
+	priv->tx_ring_size = BCMENET_DEF_TX_DESC;
+
+	pd = pdev->dev.platform_data;
+	if (pd) {
+		memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN);
+		priv->has_phy = pd->has_phy;
+		priv->phy_id = pd->phy_id;
+		priv->has_phy_interrupt = pd->has_phy_interrupt;
+		priv->phy_interrupt = pd->phy_interrupt;
+		priv->use_external_mii = !pd->use_internal_phy;
+		priv->pause_auto = pd->pause_auto;
+		priv->pause_rx = pd->pause_rx;
+		priv->pause_tx = pd->pause_tx;
+		priv->force_duplex_full = pd->force_duplex_full;
+		priv->force_speed_100 = pd->force_speed_100;
+	}
+
+	if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
+		/* using internal PHY, enable clock */
+		priv->phy_clk = clk_get(&pdev->dev, "ephy");
+		if (IS_ERR(priv->phy_clk)) {
+			ret = PTR_ERR(priv->phy_clk);
+			priv->phy_clk = NULL;
+			goto out_put_clk_mac;
+		}
+		clk_enable(priv->phy_clk);
+	}
+
+	/* do minimal hardware init to be able to probe mii bus */
+	bcm_enet_hw_preinit(priv);
+
+	/* MII bus registration */
+	if (priv->has_phy) {
+
+		priv->mii_bus = mdiobus_alloc();
+		if (!priv->mii_bus) {
+			ret = -ENOMEM;
+			goto out_uninit_hw;
+		}
+
+		bus = priv->mii_bus;
+		bus->name = "bcm63xx_enet MII bus";
+		bus->parent = &pdev->dev;
+		bus->priv = priv;
+		bus->read = bcm_enet_mdio_read_phylib;
+		bus->write = bcm_enet_mdio_write_phylib;
+		sprintf(bus->id, "%d", priv->mac_id);
+
+		/* only probe bus where we think the PHY is, because
+		 * the mdio read operation return 0 instead of 0xffff
+		 * if a slave is not present on hw */
+		bus->phy_mask = ~(1 << priv->phy_id);
+
+		bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+		if (!bus->irq) {
+			ret = -ENOMEM;
+			goto out_free_mdio;
+		}
+
+		if (priv->has_phy_interrupt)
+			bus->irq[priv->phy_id] = priv->phy_interrupt;
+		else
+			bus->irq[priv->phy_id] = PHY_POLL;
+
+		ret = mdiobus_register(bus);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to register mdio bus\n");
+			goto out_free_mdio;
+		}
+	} else {
+
+		/* run platform code to initialize PHY device */
+		if (pd->mii_config &&
+		    pd->mii_config(dev, 1, bcm_enet_mdio_read_mii,
+				   bcm_enet_mdio_write_mii)) {
+			dev_err(&pdev->dev, "unable to configure mdio bus\n");
+			goto out_uninit_hw;
+		}
+	}
+
+	spin_lock_init(&priv->rx_lock);
+
+	/* init rx timeout (used for oom) */
+	init_timer(&priv->rx_timeout);
+	priv->rx_timeout.function = bcm_enet_refill_rx_timer;
+	priv->rx_timeout.data = (unsigned long)dev;
+
+	/* init the mib update lock&work */
+	mutex_init(&priv->mib_update_lock);
+	INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer);
+
+	/* zero mib counters */
+	for (i = 0; i < ENET_MIB_REG_COUNT; i++)
+		enet_writel(priv, 0, ENET_MIB_REG(i));
+
+	/* register netdevice */
+	dev->netdev_ops = &bcm_enet_ops;
+	netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
+
+	SET_ETHTOOL_OPS(dev, &bcm_enet_ethtool_ops);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	ret = register_netdev(dev);
+	if (ret)
+		goto out_unregister_mdio;
+
+	netif_carrier_off(dev);
+	platform_set_drvdata(pdev, dev);
+	priv->pdev = pdev;
+	priv->net_dev = dev;
+
+	return 0;
+
+out_unregister_mdio:
+	if (priv->mii_bus) {
+		mdiobus_unregister(priv->mii_bus);
+		kfree(priv->mii_bus->irq);
+	}
+
+out_free_mdio:
+	if (priv->mii_bus)
+		mdiobus_free(priv->mii_bus);
+
+out_uninit_hw:
+	/* turn off mdc clock */
+	enet_writel(priv, 0, ENET_MIISC_REG);
+	if (priv->phy_clk) {
+		clk_disable(priv->phy_clk);
+		clk_put(priv->phy_clk);
+	}
+
+out_put_clk_mac:
+	clk_disable(priv->mac_clk);
+	clk_put(priv->mac_clk);
+
+out_unmap:
+	iounmap(priv->base);
+
+out_release_mem:
+	release_mem_region(res_mem->start, iomem_size);
+out:
+	free_netdev(dev);
+	return ret;
+}
+
+
+/*
+ * exit func, stops hardware and unregisters netdevice
+ */
+static int __devexit bcm_enet_remove(struct platform_device *pdev)
+{
+	struct bcm_enet_priv *priv;
+	struct net_device *dev;
+	struct resource *res;
+
+	/* stop netdevice */
+	dev = platform_get_drvdata(pdev);
+	priv = netdev_priv(dev);
+	unregister_netdev(dev);
+
+	/* turn off mdc clock */
+	enet_writel(priv, 0, ENET_MIISC_REG);
+
+	if (priv->has_phy) {
+		mdiobus_unregister(priv->mii_bus);
+		kfree(priv->mii_bus->irq);
+		mdiobus_free(priv->mii_bus);
+	} else {
+		struct bcm63xx_enet_platform_data *pd;
+
+		pd = pdev->dev.platform_data;
+		if (pd && pd->mii_config)
+			pd->mii_config(dev, 0, bcm_enet_mdio_read_mii,
+				       bcm_enet_mdio_write_mii);
+	}
+
+	/* release device resources */
+	iounmap(priv->base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	/* disable hw block clocks */
+	if (priv->phy_clk) {
+		clk_disable(priv->phy_clk);
+		clk_put(priv->phy_clk);
+	}
+	clk_disable(priv->mac_clk);
+	clk_put(priv->mac_clk);
+
+	platform_set_drvdata(pdev, NULL);
+	free_netdev(dev);
+	return 0;
+}
+
+struct platform_driver bcm63xx_enet_driver = {
+	.probe	= bcm_enet_probe,
+	.remove	= __devexit_p(bcm_enet_remove),
+	.driver	= {
+		.name	= "bcm63xx_enet",
+		.owner  = THIS_MODULE,
+	},
+};
+
+/*
+ * reserve & remap memory space shared between all macs
+ */
+static int __devinit bcm_enet_shared_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	unsigned int iomem_size;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	iomem_size = res->end - res->start + 1;
+	if (!request_mem_region(res->start, iomem_size, "bcm63xx_enet_dma"))
+		return -EBUSY;
+
+	bcm_enet_shared_base = ioremap(res->start, iomem_size);
+	if (!bcm_enet_shared_base) {
+		release_mem_region(res->start, iomem_size);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int __devexit bcm_enet_shared_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	iounmap(bcm_enet_shared_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+	return 0;
+}
+
+/*
+ * this "shared" driver is needed because both macs share a single
+ * address space
+ */
+struct platform_driver bcm63xx_enet_shared_driver = {
+	.probe	= bcm_enet_shared_probe,
+	.remove	= __devexit_p(bcm_enet_shared_remove),
+	.driver	= {
+		.name	= "bcm63xx_enet_shared",
+		.owner  = THIS_MODULE,
+	},
+};
+
+/*
+ * entry point
+ */
+static int __init bcm_enet_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&bcm63xx_enet_shared_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&bcm63xx_enet_driver);
+	if (ret)
+		platform_driver_unregister(&bcm63xx_enet_shared_driver);
+
+	return ret;
+}
+
+static void __exit bcm_enet_exit(void)
+{
+	platform_driver_unregister(&bcm63xx_enet_driver);
+	platform_driver_unregister(&bcm63xx_enet_shared_driver);
+}
+
+
+module_init(bcm_enet_init);
+module_exit(bcm_enet_exit);
+
+MODULE_DESCRIPTION("BCM63xx internal ethernet mac driver");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/bcm63xx_enet.h b/drivers/net/bcm63xx_enet.h
new file mode 100644
index 000000000000..bd3684d42d74
--- /dev/null
+++ b/drivers/net/bcm63xx_enet.h
@@ -0,0 +1,303 @@
+#ifndef BCM63XX_ENET_H_
+#define BCM63XX_ENET_H_
+
+#include <linux/types.h>
+#include <linux/mii.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_irq.h>
+#include <bcm63xx_io.h>
+
+/* default number of descriptor */
+#define BCMENET_DEF_RX_DESC	64
+#define BCMENET_DEF_TX_DESC	32
+
+/* maximum burst len for dma (4 bytes unit) */
+#define BCMENET_DMA_MAXBURST	16
+
+/* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
+ * must be low enough so that a DMA transfer of above burst length can
+ * not overflow the fifo  */
+#define BCMENET_TX_FIFO_TRESH	32
+
+/*
+ * hardware maximum rx/tx packet size including FCS, max mtu is
+ * actually 2047, but if we set max rx size register to 2047 we won't
+ * get overflow information if packet size is 2048 or above
+ */
+#define BCMENET_MAX_MTU		2046
+
+/*
+ * rx/tx dma descriptor
+ */
+struct bcm_enet_desc {
+	u32 len_stat;
+	u32 address;
+};
+
+#define DMADESC_LENGTH_SHIFT	16
+#define DMADESC_LENGTH_MASK	(0xfff << DMADESC_LENGTH_SHIFT)
+#define DMADESC_OWNER_MASK	(1 << 15)
+#define DMADESC_EOP_MASK	(1 << 14)
+#define DMADESC_SOP_MASK	(1 << 13)
+#define DMADESC_ESOP_MASK	(DMADESC_EOP_MASK | DMADESC_SOP_MASK)
+#define DMADESC_WRAP_MASK	(1 << 12)
+
+#define DMADESC_UNDER_MASK	(1 << 9)
+#define DMADESC_APPEND_CRC	(1 << 8)
+#define DMADESC_OVSIZE_MASK	(1 << 4)
+#define DMADESC_RXER_MASK	(1 << 2)
+#define DMADESC_CRC_MASK	(1 << 1)
+#define DMADESC_OV_MASK		(1 << 0)
+#define DMADESC_ERR_MASK	(DMADESC_UNDER_MASK | \
+				DMADESC_OVSIZE_MASK | \
+				DMADESC_RXER_MASK | \
+				DMADESC_CRC_MASK | \
+				DMADESC_OV_MASK)
+
+
+/*
+ * MIB Counters register definitions
+*/
+#define ETH_MIB_TX_GD_OCTETS			0
+#define ETH_MIB_TX_GD_PKTS			1
+#define ETH_MIB_TX_ALL_OCTETS			2
+#define ETH_MIB_TX_ALL_PKTS			3
+#define ETH_MIB_TX_BRDCAST			4
+#define ETH_MIB_TX_MULT				5
+#define ETH_MIB_TX_64				6
+#define ETH_MIB_TX_65_127			7
+#define ETH_MIB_TX_128_255			8
+#define ETH_MIB_TX_256_511			9
+#define ETH_MIB_TX_512_1023			10
+#define ETH_MIB_TX_1024_MAX			11
+#define ETH_MIB_TX_JAB				12
+#define ETH_MIB_TX_OVR				13
+#define ETH_MIB_TX_FRAG				14
+#define ETH_MIB_TX_UNDERRUN			15
+#define ETH_MIB_TX_COL				16
+#define ETH_MIB_TX_1_COL			17
+#define ETH_MIB_TX_M_COL			18
+#define ETH_MIB_TX_EX_COL			19
+#define ETH_MIB_TX_LATE				20
+#define ETH_MIB_TX_DEF				21
+#define ETH_MIB_TX_CRS				22
+#define ETH_MIB_TX_PAUSE			23
+
+#define ETH_MIB_RX_GD_OCTETS			32
+#define ETH_MIB_RX_GD_PKTS			33
+#define ETH_MIB_RX_ALL_OCTETS			34
+#define ETH_MIB_RX_ALL_PKTS			35
+#define ETH_MIB_RX_BRDCAST			36
+#define ETH_MIB_RX_MULT				37
+#define ETH_MIB_RX_64				38
+#define ETH_MIB_RX_65_127			39
+#define ETH_MIB_RX_128_255			40
+#define ETH_MIB_RX_256_511			41
+#define ETH_MIB_RX_512_1023			42
+#define ETH_MIB_RX_1024_MAX			43
+#define ETH_MIB_RX_JAB				44
+#define ETH_MIB_RX_OVR				45
+#define ETH_MIB_RX_FRAG				46
+#define ETH_MIB_RX_DROP				47
+#define ETH_MIB_RX_CRC_ALIGN			48
+#define ETH_MIB_RX_UND				49
+#define ETH_MIB_RX_CRC				50
+#define ETH_MIB_RX_ALIGN			51
+#define ETH_MIB_RX_SYM				52
+#define ETH_MIB_RX_PAUSE			53
+#define ETH_MIB_RX_CNTRL			54
+
+
+struct bcm_enet_mib_counters {
+	u64 tx_gd_octets;
+	u32 tx_gd_pkts;
+	u32 tx_all_octets;
+	u32 tx_all_pkts;
+	u32 tx_brdcast;
+	u32 tx_mult;
+	u32 tx_64;
+	u32 tx_65_127;
+	u32 tx_128_255;
+	u32 tx_256_511;
+	u32 tx_512_1023;
+	u32 tx_1024_max;
+	u32 tx_jab;
+	u32 tx_ovr;
+	u32 tx_frag;
+	u32 tx_underrun;
+	u32 tx_col;
+	u32 tx_1_col;
+	u32 tx_m_col;
+	u32 tx_ex_col;
+	u32 tx_late;
+	u32 tx_def;
+	u32 tx_crs;
+	u32 tx_pause;
+	u64 rx_gd_octets;
+	u32 rx_gd_pkts;
+	u32 rx_all_octets;
+	u32 rx_all_pkts;
+	u32 rx_brdcast;
+	u32 rx_mult;
+	u32 rx_64;
+	u32 rx_65_127;
+	u32 rx_128_255;
+	u32 rx_256_511;
+	u32 rx_512_1023;
+	u32 rx_1024_max;
+	u32 rx_jab;
+	u32 rx_ovr;
+	u32 rx_frag;
+	u32 rx_drop;
+	u32 rx_crc_align;
+	u32 rx_und;
+	u32 rx_crc;
+	u32 rx_align;
+	u32 rx_sym;
+	u32 rx_pause;
+	u32 rx_cntrl;
+};
+
+
+struct bcm_enet_priv {
+
+	/* mac id (from platform device id) */
+	int mac_id;
+
+	/* base remapped address of device */
+	void __iomem *base;
+
+	/* mac irq, rx_dma irq, tx_dma irq */
+	int irq;
+	int irq_rx;
+	int irq_tx;
+
+	/* hw view of rx & tx dma ring */
+	dma_addr_t rx_desc_dma;
+	dma_addr_t tx_desc_dma;
+
+	/* allocated size (in bytes) for rx & tx dma ring */
+	unsigned int rx_desc_alloc_size;
+	unsigned int tx_desc_alloc_size;
+
+
+	struct napi_struct napi;
+
+	/* dma channel id for rx */
+	int rx_chan;
+
+	/* number of dma desc in rx ring */
+	int rx_ring_size;
+
+	/* cpu view of rx dma ring */
+	struct bcm_enet_desc *rx_desc_cpu;
+
+	/* current number of armed descriptor given to hardware for rx */
+	int rx_desc_count;
+
+	/* next rx descriptor to fetch from hardware */
+	int rx_curr_desc;
+
+	/* next dirty rx descriptor to refill */
+	int rx_dirty_desc;
+
+	/* size of allocated rx skbs */
+	unsigned int rx_skb_size;
+
+	/* list of skb given to hw for rx */
+	struct sk_buff **rx_skb;
+
+	/* used when rx skb allocation failed, so we defer rx queue
+	 * refill */
+	struct timer_list rx_timeout;
+
+	/* lock rx_timeout against rx normal operation */
+	spinlock_t rx_lock;
+
+
+	/* dma channel id for tx */
+	int tx_chan;
+
+	/* number of dma desc in tx ring */
+	int tx_ring_size;
+
+	/* cpu view of rx dma ring */
+	struct bcm_enet_desc *tx_desc_cpu;
+
+	/* number of available descriptor for tx */
+	int tx_desc_count;
+
+	/* next tx descriptor avaiable */
+	int tx_curr_desc;
+
+	/* next dirty tx descriptor to reclaim */
+	int tx_dirty_desc;
+
+	/* list of skb given to hw for tx */
+	struct sk_buff **tx_skb;
+
+	/* lock used by tx reclaim and xmit */
+	spinlock_t tx_lock;
+
+
+	/* set if internal phy is ignored and external mii interface
+	 * is selected */
+	int use_external_mii;
+
+	/* set if a phy is connected, phy address must be known,
+	 * probing is not possible */
+	int has_phy;
+	int phy_id;
+
+	/* set if connected phy has an associated irq */
+	int has_phy_interrupt;
+	int phy_interrupt;
+
+	/* used when a phy is connected (phylib used) */
+	struct mii_bus *mii_bus;
+	struct phy_device *phydev;
+	int old_link;
+	int old_duplex;
+	int old_pause;
+
+	/* used when no phy is connected */
+	int force_speed_100;
+	int force_duplex_full;
+
+	/* pause parameters */
+	int pause_auto;
+	int pause_rx;
+	int pause_tx;
+
+	/* stats */
+	struct net_device_stats stats;
+	struct bcm_enet_mib_counters mib;
+
+	/* after mib interrupt, mib registers update is done in this
+	 * work queue */
+	struct work_struct mib_update_task;
+
+	/* lock mib update between userspace request and workqueue */
+	struct mutex mib_update_lock;
+
+	/* mac clock */
+	struct clk *mac_clk;
+
+	/* phy clock if internal phy is used */
+	struct clk *phy_clk;
+
+	/* network device reference */
+	struct net_device *net_dev;
+
+	/* platform device reference */
+	struct platform_device *pdev;
+
+	/* maximum hardware transmit/receive size */
+	unsigned int hw_mtu;
+};
+
+#endif /* ! BCM63XX_ENET_H_ */
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 13b72ce870de..684c6fe24c8d 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -362,5 +362,6 @@ static inline u8 is_udp_pkt(struct sk_buff *skb)
 extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
 		u16 num_popped);
 extern void be_link_status_update(struct be_adapter *adapter, bool link_up);
+extern void netdev_stats_update(struct be_adapter *adapter);
 extern int be_load_fw(struct be_adapter *adapter, u8 *func);
 #endif				/* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 1db092498309..3dd76c4170bf 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -59,15 +59,22 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
 
 	compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
 				CQE_STATUS_COMPL_MASK;
-	if (compl_status != MCC_STATUS_SUCCESS) {
+	if (compl_status == MCC_STATUS_SUCCESS) {
+		if (compl->tag0 == OPCODE_ETH_GET_STATISTICS) {
+			struct be_cmd_resp_get_stats *resp =
+						adapter->stats.cmd.va;
+			be_dws_le_to_cpu(&resp->hw_stats,
+						sizeof(resp->hw_stats));
+			netdev_stats_update(adapter);
+		}
+	} else if (compl_status != MCC_STATUS_NOT_SUPPORTED) {
 		extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
 				CQE_STATUS_EXTD_MASK;
 		dev_warn(&adapter->pdev->dev,
 			"Error in cmd completion: status(compl/extd)=%d/%d\n",
 			compl_status, extd_status);
-		return -1;
 	}
-	return 0;
+	return compl_status;
 }
 
 /* Link state evt is a string of bytes; no need for endian swapping */
@@ -97,10 +104,10 @@ static struct be_mcc_compl *be_mcc_compl_get(struct be_adapter *adapter)
 	return NULL;
 }
 
-void be_process_mcc(struct be_adapter *adapter)
+int be_process_mcc(struct be_adapter *adapter)
 {
 	struct be_mcc_compl *compl;
-	int num = 0;
+	int num = 0, status = 0;
 
 	spin_lock_bh(&adapter->mcc_cq_lock);
 	while ((compl = be_mcc_compl_get(adapter))) {
@@ -111,38 +118,47 @@ void be_process_mcc(struct be_adapter *adapter)
 			/* Interpret compl as a async link evt */
 			be_async_link_state_process(adapter,
 				(struct be_async_event_link_state *) compl);
-		} else {
-			be_mcc_compl_process(adapter, compl);
-			atomic_dec(&adapter->mcc_obj.q.used);
+		} else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) {
+				status = be_mcc_compl_process(adapter, compl);
+				atomic_dec(&adapter->mcc_obj.q.used);
 		}
 		be_mcc_compl_use(compl);
 		num++;
 	}
+
 	if (num)
 		be_cq_notify(adapter, adapter->mcc_obj.cq.id, true, num);
+
 	spin_unlock_bh(&adapter->mcc_cq_lock);
+	return status;
 }
 
 /* Wait till no more pending mcc requests are present */
-static void be_mcc_wait_compl(struct be_adapter *adapter)
+static int be_mcc_wait_compl(struct be_adapter *adapter)
 {
-#define mcc_timeout		50000 /* 5s timeout */
-	int i;
+#define mcc_timeout		120000 /* 12s timeout */
+	int i, status;
 	for (i = 0; i < mcc_timeout; i++) {
-		be_process_mcc(adapter);
+		status = be_process_mcc(adapter);
+		if (status)
+			return status;
+
 		if (atomic_read(&adapter->mcc_obj.q.used) == 0)
 			break;
 		udelay(100);
 	}
-	if (i == mcc_timeout)
+	if (i == mcc_timeout) {
 		dev_err(&adapter->pdev->dev, "mccq poll timed out\n");
+		return -1;
+	}
+	return 0;
 }
 
 /* Notify MCC requests and wait for completion */
-static void be_mcc_notify_wait(struct be_adapter *adapter)
+static int be_mcc_notify_wait(struct be_adapter *adapter)
 {
 	be_mcc_notify(adapter);
-	be_mcc_wait_compl(adapter);
+	return be_mcc_wait_compl(adapter);
 }
 
 static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
@@ -173,7 +189,7 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
  * Insert the mailbox address into the doorbell in two steps
  * Polls on the mbox doorbell till a command completion (or a timeout) occurs
  */
-static int be_mbox_notify(struct be_adapter *adapter)
+static int be_mbox_notify_wait(struct be_adapter *adapter)
 {
 	int status;
 	u32 val = 0;
@@ -182,8 +198,6 @@ static int be_mbox_notify(struct be_adapter *adapter)
 	struct be_mcc_mailbox *mbox = mbox_mem->va;
 	struct be_mcc_compl *compl = &mbox->compl;
 
-	memset(compl, 0, sizeof(*compl));
-
 	val |= MPU_MAILBOX_DB_HI_MASK;
 	/* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
 	val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
@@ -310,34 +324,40 @@ static u32 eq_delay_to_mult(u32 usec_delay)
 	return multiplier;
 }
 
-static inline struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
+static inline struct be_mcc_wrb *wrb_from_mbox(struct be_adapter *adapter)
 {
-	return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+	struct be_dma_mem *mbox_mem = &adapter->mbox_mem;
+	struct be_mcc_wrb *wrb
+		= &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+	memset(wrb, 0, sizeof(*wrb));
+	return wrb;
 }
 
-static inline struct be_mcc_wrb *wrb_from_mcc(struct be_queue_info *mccq)
+static struct be_mcc_wrb *wrb_from_mccq(struct be_adapter *adapter)
 {
-	struct be_mcc_wrb *wrb = NULL;
-	if (atomic_read(&mccq->used) < mccq->len) {
-		wrb = queue_head_node(mccq);
-		queue_head_inc(mccq);
-		atomic_inc(&mccq->used);
-		memset(wrb, 0, sizeof(*wrb));
-	}
+	struct be_queue_info *mccq = &adapter->mcc_obj.q;
+	struct be_mcc_wrb *wrb;
+
+	BUG_ON(atomic_read(&mccq->used) >= mccq->len);
+	wrb = queue_head_node(mccq);
+	queue_head_inc(mccq);
+	atomic_inc(&mccq->used);
+	memset(wrb, 0, sizeof(*wrb));
 	return wrb;
 }
 
 int be_cmd_eq_create(struct be_adapter *adapter,
 		struct be_queue_info *eq, int eq_delay)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_eq_create *req = embedded_payload(wrb);
-	struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_eq_create *req;
 	struct be_dma_mem *q_mem = &eq->dma_mem;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -359,25 +379,29 @@ int be_cmd_eq_create(struct be_adapter *adapter,
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
+		struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
 		eq->id = le16_to_cpu(resp->eq_id);
 		eq->created = true;
 	}
+
 	spin_unlock(&adapter->mbox_lock);
 	return status;
 }
 
+/* Uses mbox */
 int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
 			u8 type, bool permanent, u32 if_handle)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_mac_query *req = embedded_payload(wrb);
-	struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_mac_query *req;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -388,27 +412,32 @@ int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
 	if (permanent) {
 		req->permanent = 1;
 	} else {
-		req->if_id = cpu_to_le16((u16)if_handle);
+		req->if_id = cpu_to_le16((u16) if_handle);
 		req->permanent = 0;
 	}
 
-	status = be_mbox_notify(adapter);
-	if (!status)
+	status = be_mbox_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
 		memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
+	}
 
 	spin_unlock(&adapter->mbox_lock);
 	return status;
 }
 
+/* Uses synchronous MCCQ */
 int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr,
 		u32 if_id, u32 *pmac_id)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_pmac_add *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_pmac_add *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -418,24 +447,27 @@ int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr,
 	req->if_id = cpu_to_le32(if_id);
 	memcpy(req->mac_address, mac_addr, ETH_ALEN);
 
-	status = be_mbox_notify(adapter);
+	status = be_mcc_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_pmac_add *resp = embedded_payload(wrb);
 		*pmac_id = le32_to_cpu(resp->pmac_id);
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
 
+/* Uses synchronous MCCQ */
 int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_pmac_del *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_pmac_del *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -445,25 +477,29 @@ int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id)
 	req->if_id = cpu_to_le32(if_id);
 	req->pmac_id = cpu_to_le32(pmac_id);
 
-	status = be_mbox_notify(adapter);
-	spin_unlock(&adapter->mbox_lock);
+	status = be_mcc_notify_wait(adapter);
+
+	spin_unlock_bh(&adapter->mcc_lock);
 
 	return status;
 }
 
+/* Uses Mbox */
 int be_cmd_cq_create(struct be_adapter *adapter,
 		struct be_queue_info *cq, struct be_queue_info *eq,
 		bool sol_evts, bool no_delay, int coalesce_wm)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_cq_create *req = embedded_payload(wrb);
-	struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_cq_create *req;
 	struct be_dma_mem *q_mem = &cq->dma_mem;
-	void *ctxt = &req->context;
+	void *ctxt;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
+	ctxt = &req->context;
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -486,11 +522,13 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
+		struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
 		cq->id = le16_to_cpu(resp->cq_id);
 		cq->created = true;
 	}
+
 	spin_unlock(&adapter->mbox_lock);
 
 	return status;
@@ -508,14 +546,17 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 			struct be_queue_info *mccq,
 			struct be_queue_info *cq)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_mcc_create *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_mcc_create *req;
 	struct be_dma_mem *q_mem = &mccq->dma_mem;
-	void *ctxt = &req->context;
+	void *ctxt;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
+	ctxt = &req->context;
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -534,7 +575,7 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb);
 		mccq->id = le16_to_cpu(resp->id);
@@ -549,15 +590,17 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 			struct be_queue_info *txq,
 			struct be_queue_info *cq)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_eth_tx_create *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_eth_tx_create *req;
 	struct be_dma_mem *q_mem = &txq->dma_mem;
-	void *ctxt = &req->context;
+	void *ctxt;
 	int status;
-	u32 len_encoded;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
+	ctxt = &req->context;
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -568,10 +611,8 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 	req->ulp_num = BE_ULP1_NUM;
 	req->type = BE_ETH_TX_RING_TYPE_STANDARD;
 
-	len_encoded = fls(txq->len); /* log2(len) + 1 */
-	if (len_encoded == 16)
-		len_encoded = 0;
-	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt, len_encoded);
+	AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt,
+		be_encoded_q_len(txq->len));
 	AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
 			be_pci_func(adapter));
 	AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
@@ -581,28 +622,32 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_eth_tx_create *resp = embedded_payload(wrb);
 		txq->id = le16_to_cpu(resp->cid);
 		txq->created = true;
 	}
+
 	spin_unlock(&adapter->mbox_lock);
 
 	return status;
 }
 
+/* Uses mbox */
 int be_cmd_rxq_create(struct be_adapter *adapter,
 		struct be_queue_info *rxq, u16 cq_id, u16 frag_size,
 		u16 max_frame_size, u32 if_id, u32 rss)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_eth_rx_create *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_eth_rx_create *req;
 	struct be_dma_mem *q_mem = &rxq->dma_mem;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -617,29 +662,34 @@ int be_cmd_rxq_create(struct be_adapter *adapter,
 	req->max_frame_size = cpu_to_le16(max_frame_size);
 	req->rss_queue = cpu_to_le32(rss);
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_eth_rx_create *resp = embedded_payload(wrb);
 		rxq->id = le16_to_cpu(resp->id);
 		rxq->created = true;
 	}
+
 	spin_unlock(&adapter->mbox_lock);
 
 	return status;
 }
 
-/* Generic destroyer function for all types of queues */
+/* Generic destroyer function for all types of queues
+ * Uses Mbox
+ */
 int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 		int queue_type)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_q_destroy *req;
 	u8 subsys = 0, opcode = 0;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
 
-	memset(wrb, 0, sizeof(*wrb));
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
+
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
 	switch (queue_type) {
@@ -669,23 +719,27 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 	be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
 	req->id = cpu_to_le16(q->id);
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 
 	spin_unlock(&adapter->mbox_lock);
 
 	return status;
 }
 
-/* Create an rx filtering policy configuration on an i/f */
+/* Create an rx filtering policy configuration on an i/f
+ * Uses mbox
+ */
 int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac,
 		bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_if_create *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_if_create *req;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -694,10 +748,11 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac,
 
 	req->capability_flags = cpu_to_le32(flags);
 	req->enable_flags = cpu_to_le32(flags);
+	req->pmac_invalid = pmac_invalid;
 	if (!pmac_invalid)
 		memcpy(req->mac_addr, mac, ETH_ALEN);
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_if_create *resp = embedded_payload(wrb);
 		*if_handle = le32_to_cpu(resp->interface_id);
@@ -709,14 +764,17 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac,
 	return status;
 }
 
+/* Uses mbox */
 int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_if_destroy *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_if_destroy *req;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -724,7 +782,8 @@ int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id)
 		OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req));
 
 	req->interface_id = cpu_to_le32(interface_id);
-	status = be_mbox_notify(adapter);
+
+	status = be_mbox_notify_wait(adapter);
 
 	spin_unlock(&adapter->mbox_lock);
 
@@ -733,20 +792,22 @@ int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id)
 
 /* Get stats is a non embedded command: the request is not embedded inside
  * WRB but is a separate dma memory block
+ * Uses asynchronous MCC
  */
 int be_cmd_get_stats(struct be_adapter *adapter, struct be_dma_mem *nonemb_cmd)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_get_stats *req = nonemb_cmd->va;
-	struct be_sge *sge = nonembedded_sgl(wrb);
-	int status;
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_stats *req;
+	struct be_sge *sge;
 
-	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&adapter->mcc_lock);
 
-	memset(req, 0, sizeof(*req));
+	wrb = wrb_from_mccq(adapter);
+	req = nonemb_cmd->va;
+	sge = nonembedded_sgl(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+	wrb->tag0 = OPCODE_ETH_GET_STATISTICS;
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
 		OPCODE_ETH_GET_STATISTICS, sizeof(*req));
@@ -754,59 +815,61 @@ int be_cmd_get_stats(struct be_adapter *adapter, struct be_dma_mem *nonemb_cmd)
 	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
 	sge->len = cpu_to_le32(nonemb_cmd->size);
 
-	status = be_mbox_notify(adapter);
-	if (!status) {
-		struct be_cmd_resp_get_stats *resp = nonemb_cmd->va;
-		be_dws_le_to_cpu(&resp->hw_stats, sizeof(resp->hw_stats));
-	}
+	be_mcc_notify(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
-	return status;
+	spin_unlock_bh(&adapter->mcc_lock);
+	return 0;
 }
 
+/* Uses synchronous mcc */
 int be_cmd_link_status_query(struct be_adapter *adapter,
 			bool *link_up)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_link_status *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_link_status *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
 
 	*link_up = false;
-	memset(wrb, 0, sizeof(*wrb));
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req));
 
-	status = be_mbox_notify(adapter);
+	status = be_mcc_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
 		if (resp->mac_speed != PHY_LINK_SPEED_ZERO)
 			*link_up = true;
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
 
+/* Uses Mbox */
 int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_get_fw_version *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_fw_version *req;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_GET_FW_VERSION, sizeof(*req));
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
 		strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
@@ -816,15 +879,18 @@ int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver)
 	return status;
 }
 
-/* set the EQ delay interval of an EQ to specified value */
+/* set the EQ delay interval of an EQ to specified value
+ * Uses async mcc
+ */
 int be_cmd_modify_eqd(struct be_adapter *adapter, u32 eq_id, u32 eqd)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_modify_eq_delay *req = embedded_payload(wrb);
-	int status;
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_modify_eq_delay *req;
 
-	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -836,21 +902,24 @@ int be_cmd_modify_eqd(struct be_adapter *adapter, u32 eq_id, u32 eqd)
 	req->delay[0].phase = 0;
 	req->delay[0].delay_multiplier = cpu_to_le32(eqd);
 
-	status = be_mbox_notify(adapter);
+	be_mcc_notify(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
-	return status;
+	spin_unlock_bh(&adapter->mcc_lock);
+	return 0;
 }
 
+/* Uses sycnhronous mcc */
 int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
 			u32 num, bool untagged, bool promiscuous)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_vlan_config *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_vlan_config *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -866,23 +935,24 @@ int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
 			req->num_vlan * sizeof(vtag_array[0]));
 	}
 
-	status = be_mbox_notify(adapter);
+	status = be_mcc_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
 
-/* Use MCC for this command as it may be called in BH context */
+/* Uses MCC for this command as it may be called in BH context
+ * Uses synchronous mcc
+ */
 int be_cmd_promiscuous_config(struct be_adapter *adapter, u8 port_num, bool en)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_promiscuous_config *req;
+	int status;
 
 	spin_lock_bh(&adapter->mcc_lock);
 
-	wrb = wrb_from_mcc(&adapter->mcc_obj.q);
-	BUG_ON(!wrb);
-
+	wrb = wrb_from_mccq(adapter);
 	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -895,14 +965,14 @@ int be_cmd_promiscuous_config(struct be_adapter *adapter, u8 port_num, bool en)
 	else
 		req->port0_promiscuous = en;
 
-	be_mcc_notify_wait(adapter);
+	status = be_mcc_notify_wait(adapter);
 
 	spin_unlock_bh(&adapter->mcc_lock);
-	return 0;
+	return status;
 }
 
 /*
- * Use MCC for this command as it may be called in BH context
+ * Uses MCC for this command as it may be called in BH context
  * (mc == NULL) => multicast promiscous
  */
 int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
@@ -914,9 +984,7 @@ int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 
 	spin_lock_bh(&adapter->mcc_lock);
 
-	wrb = wrb_from_mcc(&adapter->mcc_obj.q);
-	BUG_ON(!wrb);
-
+	wrb = wrb_from_mccq(adapter);
 	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -944,15 +1012,17 @@ int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 	return 0;
 }
 
+/* Uses synchrounous mcc */
 int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_set_flow_control *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_set_flow_control *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	spin_lock_bh(&adapter->mcc_lock);
 
-	memset(wrb, 0, sizeof(*wrb));
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
@@ -962,28 +1032,30 @@ int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
 	req->tx_flow_control = cpu_to_le16((u16)tx_fc);
 	req->rx_flow_control = cpu_to_le16((u16)rx_fc);
 
-	status = be_mbox_notify(adapter);
+	status = be_mcc_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
 
+/* Uses sycn mcc */
 int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_get_flow_control *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_flow_control *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	spin_lock_bh(&adapter->mcc_lock);
 
-	memset(wrb, 0, sizeof(*wrb));
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req));
 
-	status = be_mbox_notify(adapter);
+	status = be_mcc_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_get_flow_control *resp =
 						embedded_payload(wrb);
@@ -991,26 +1063,28 @@ int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc)
 		*rx_fc = le16_to_cpu(resp->rx_flow_control);
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
 
+/* Uses mbox */
 int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_query_fw_cfg *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_query_fw_cfg *req;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
 
-	memset(wrb, 0, sizeof(*wrb));
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb);
 		*port_num = le32_to_cpu(resp->phys_port);
@@ -1020,22 +1094,24 @@ int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num)
 	return status;
 }
 
+/* Uses mbox */
 int be_cmd_reset_function(struct be_adapter *adapter)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
-	struct be_cmd_req_hdr *req = embedded_payload(wrb);
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_hdr *req;
 	int status;
 
 	spin_lock(&adapter->mbox_lock);
 
-	memset(wrb, 0, sizeof(*wrb));
+	wrb = wrb_from_mbox(adapter);
+	req = embedded_payload(wrb);
 
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
 	be_cmd_hdr_prepare(req, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
 
-	status = be_mbox_notify(adapter);
+	status = be_mbox_notify_wait(adapter);
 
 	spin_unlock(&adapter->mbox_lock);
 	return status;
@@ -1044,13 +1120,17 @@ int be_cmd_reset_function(struct be_adapter *adapter)
 int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			u32 flash_type, u32 flash_opcode, u32 buf_size)
 {
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
+	struct be_mcc_wrb *wrb;
 	struct be_cmd_write_flashrom *req = cmd->va;
-	struct be_sge *sge = nonembedded_sgl(wrb);
+	struct be_sge *sge;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
+	sge = nonembedded_sgl(wrb);
+
 	be_wrb_hdr_prepare(wrb, cmd->size, false, 1);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
@@ -1063,8 +1143,8 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	req->params.op_code = cpu_to_le32(flash_opcode);
 	req->params.data_buf_size = cpu_to_le32(buf_size);
 
-	status = be_mbox_notify(adapter);
+	status = be_mcc_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index fd7028e5b78e..93e432f3d926 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -61,7 +61,8 @@ enum {
 /* The command is completing because the queue was getting flushed */
 	MCC_STATUS_QUEUE_FLUSHING = 0x4,
 /* The command is completing with a DMA error */
-	MCC_STATUS_DMA_FAILED = 0x5
+	MCC_STATUS_DMA_FAILED = 0x5,
+	MCC_STATUS_NOT_SUPPORTED = 0x66
 };
 
 #define CQE_STATUS_COMPL_MASK		0xFFFF
@@ -761,7 +762,7 @@ extern int be_cmd_get_flow_control(struct be_adapter *adapter,
 			u32 *tx_fc, u32 *rx_fc);
 extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num);
 extern int be_cmd_reset_function(struct be_adapter *adapter);
-extern void be_process_mcc(struct be_adapter *adapter);
+extern int be_process_mcc(struct be_adapter *adapter);
 extern int be_cmd_write_flashrom(struct be_adapter *adapter,
 			struct be_dma_mem *cmd, u32 flash_oper,
 			u32 flash_opcode, u32 buf_size);
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index ce11bba2cb67..409cf0595903 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -135,7 +135,7 @@ static int be_mac_addr_set(struct net_device *netdev, void *p)
 	return status;
 }
 
-static void netdev_stats_update(struct be_adapter *adapter)
+void netdev_stats_update(struct be_adapter *adapter)
 {
 	struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats.cmd.va);
 	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
@@ -431,8 +431,7 @@ static int make_tx_wrbs(struct be_adapter *adapter,
 }
 
 static netdev_tx_t be_xmit(struct sk_buff *skb,
-				 struct net_device *netdev)
-
+			struct net_device *netdev)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 	struct be_tx_obj *tx_obj = &adapter->tx_obj;
@@ -490,11 +489,11 @@ static int be_change_mtu(struct net_device *netdev, int new_mtu)
  * program them in BE.  If more than BE_NUM_VLANS_SUPPORTED are configured,
  * set the BE in promiscuous VLAN mode.
  */
-static void be_vid_config(struct net_device *netdev)
+static int be_vid_config(struct be_adapter *adapter)
 {
-	struct be_adapter *adapter = netdev_priv(netdev);
 	u16 vtag[BE_NUM_VLANS_SUPPORTED];
 	u16 ntags = 0, i;
+	int status;
 
 	if (adapter->num_vlans <= BE_NUM_VLANS_SUPPORTED)  {
 		/* Construct VLAN Table to give to HW */
@@ -504,12 +503,13 @@ static void be_vid_config(struct net_device *netdev)
 				ntags++;
 			}
 		}
-		be_cmd_vlan_config(adapter, adapter->if_handle,
-			vtag, ntags, 1, 0);
+		status = be_cmd_vlan_config(adapter, adapter->if_handle,
+					vtag, ntags, 1, 0);
 	} else {
-		be_cmd_vlan_config(adapter, adapter->if_handle,
-			NULL, 0, 1, 1);
+		status = be_cmd_vlan_config(adapter, adapter->if_handle,
+					NULL, 0, 1, 1);
 	}
+	return status;
 }
 
 static void be_vlan_register(struct net_device *netdev, struct vlan_group *grp)
@@ -532,7 +532,7 @@ static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
 	adapter->num_vlans++;
 	adapter->vlan_tag[vid] = 1;
 
-	be_vid_config(netdev);
+	be_vid_config(adapter);
 }
 
 static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
@@ -543,7 +543,7 @@ static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
 	adapter->vlan_tag[vid] = 0;
 
 	vlan_group_set_device(adapter->vlan_grp, vid, NULL);
-	be_vid_config(netdev);
+	be_vid_config(adapter);
 }
 
 static void be_set_multicast_list(struct net_device *netdev)
@@ -1444,12 +1444,8 @@ static void be_worker(struct work_struct *work)
 {
 	struct be_adapter *adapter =
 		container_of(work, struct be_adapter, work.work);
-	int status;
 
-	/* Get Stats */
-	status = be_cmd_get_stats(adapter, &adapter->stats.cmd);
-	if (!status)
-		netdev_stats_update(adapter);
+	be_cmd_get_stats(adapter, &adapter->stats.cmd);
 
 	/* Set EQ delay */
 	be_rx_eqd_update(adapter);
@@ -1622,11 +1618,6 @@ static int be_setup(struct be_adapter *adapter)
 	if (status != 0)
 		goto do_none;
 
-	be_vid_config(netdev);
-
-	status = be_cmd_set_flow_control(adapter, true, true);
-	if (status != 0)
-		goto if_destroy;
 
 	status = be_tx_queues_create(adapter);
 	if (status != 0)
@@ -1640,8 +1631,17 @@ static int be_setup(struct be_adapter *adapter)
 	if (status != 0)
 		goto rx_qs_destroy;
 
+	status = be_vid_config(adapter);
+	if (status != 0)
+		goto mccqs_destroy;
+
+	status = be_cmd_set_flow_control(adapter, true, true);
+	if (status != 0)
+		goto mccqs_destroy;
 	return 0;
 
+mccqs_destroy:
+	be_mcc_queues_destroy(adapter);
 rx_qs_destroy:
 	be_rx_queues_destroy(adapter);
 tx_qs_destroy:
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index a7e731f8a0da..69c5b15e22da 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1093,15 +1093,8 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
 			return NULL; /* still no slave, return NULL */
 	}
 
-	/*
-	 * first try the primary link; if arping, a link must tx/rx
-	 * traffic before it can be considered the curr_active_slave.
-	 * also, we would skip slaves between the curr_active_slave
-	 * and primary_slave that may be up and able to arp
-	 */
 	if ((bond->primary_slave) &&
-	    (!bond->params.arp_interval) &&
-	    (IS_UP(bond->primary_slave->dev))) {
+	    bond->primary_slave->link == BOND_LINK_UP) {
 		new_active = bond->primary_slave;
 	}
 
@@ -1109,15 +1102,14 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
 	old_active = new_active;
 
 	bond_for_each_slave_from(bond, new_active, i, old_active) {
-		if (IS_UP(new_active->dev)) {
-			if (new_active->link == BOND_LINK_UP) {
-				return new_active;
-			} else if (new_active->link == BOND_LINK_BACK) {
-				/* link up, but waiting for stabilization */
-				if (new_active->delay < mintime) {
-					mintime = new_active->delay;
-					bestslave = new_active;
-				}
+		if (new_active->link == BOND_LINK_UP) {
+			return new_active;
+		} else if (new_active->link == BOND_LINK_BACK &&
+			   IS_UP(new_active->dev)) {
+			/* link up, but waiting for stabilization */
+			if (new_active->delay < mintime) {
+				mintime = new_active->delay;
+				bestslave = new_active;
 			}
 		}
 	}
@@ -1211,7 +1203,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 			write_unlock_bh(&bond->curr_slave_lock);
 			read_unlock(&bond->lock);
 
-			netdev_bonding_change(bond->dev);
+			netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER);
 
 			read_lock(&bond->lock);
 			write_lock_bh(&bond->curr_slave_lock);
@@ -1469,14 +1461,17 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	 */
 	if (bond->slave_cnt == 0) {
 		if (bond_dev->type != slave_dev->type) {
-			dev_close(bond_dev);
 			pr_debug("%s: change device type from %d to %d\n",
 				bond_dev->name, bond_dev->type, slave_dev->type);
+
+			netdev_bonding_change(bond_dev, NETDEV_BONDING_OLDTYPE);
+
 			if (slave_dev->type != ARPHRD_ETHER)
 				bond_setup_by_slave(bond_dev, slave_dev);
 			else
 				ether_setup(bond_dev);
-			dev_open(bond_dev);
+
+			netdev_bonding_change(bond_dev, NETDEV_BONDING_NEWTYPE);
 		}
 	} else if (bond_dev->type != slave_dev->type) {
 		pr_err(DRV_NAME ": %s ether type (%d) is different "
@@ -2929,18 +2924,6 @@ static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
 		}
 	}
 
-	read_lock(&bond->curr_slave_lock);
-
-	/*
-	 * Trigger a commit if the primary option setting has changed.
-	 */
-	if (bond->primary_slave &&
-	    (bond->primary_slave != bond->curr_active_slave) &&
-	    (bond->primary_slave->link == BOND_LINK_UP))
-		commit++;
-
-	read_unlock(&bond->curr_slave_lock);
-
 	return commit;
 }
 
@@ -2961,90 +2944,58 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 			continue;
 
 		case BOND_LINK_UP:
-			write_lock_bh(&bond->curr_slave_lock);
-
-			if (!bond->curr_active_slave &&
-			    time_before_eq(jiffies, dev_trans_start(slave->dev) +
-					   delta_in_ticks)) {
+			if ((!bond->curr_active_slave &&
+			     time_before_eq(jiffies,
+					    dev_trans_start(slave->dev) +
+					    delta_in_ticks)) ||
+			    bond->curr_active_slave != slave) {
 				slave->link = BOND_LINK_UP;
-				bond_change_active_slave(bond, slave);
 				bond->current_arp_slave = NULL;
 
 				pr_info(DRV_NAME
-				       ": %s: %s is up and now the "
-				       "active interface\n",
-				       bond->dev->name, slave->dev->name);
-
-			} else if (bond->curr_active_slave != slave) {
-				/* this slave has just come up but we
-				 * already have a current slave; this can
-				 * also happen if bond_enslave adds a new
-				 * slave that is up while we are searching
-				 * for a new slave
-				 */
-				slave->link = BOND_LINK_UP;
-				bond_set_slave_inactive_flags(slave);
-				bond->current_arp_slave = NULL;
+					": %s: link status definitely "
+					"up for interface %s.\n",
+					bond->dev->name, slave->dev->name);
 
-				pr_info(DRV_NAME
-				       ": %s: backup interface %s is now up\n",
-				       bond->dev->name, slave->dev->name);
-			}
+				if (!bond->curr_active_slave ||
+				    (slave == bond->primary_slave))
+					goto do_failover;
 
-			write_unlock_bh(&bond->curr_slave_lock);
+			}
 
-			break;
+			continue;
 
 		case BOND_LINK_DOWN:
 			if (slave->link_failure_count < UINT_MAX)
 				slave->link_failure_count++;
 
 			slave->link = BOND_LINK_DOWN;
+			bond_set_slave_inactive_flags(slave);
 
-			if (slave == bond->curr_active_slave) {
-				pr_info(DRV_NAME
-				       ": %s: link status down for active "
-				       "interface %s, disabling it\n",
-				       bond->dev->name, slave->dev->name);
-
-				bond_set_slave_inactive_flags(slave);
-
-				write_lock_bh(&bond->curr_slave_lock);
-
-				bond_select_active_slave(bond);
-				if (bond->curr_active_slave)
-					bond->curr_active_slave->jiffies =
-						jiffies;
-
-				write_unlock_bh(&bond->curr_slave_lock);
+			pr_info(DRV_NAME
+				": %s: link status definitely down for "
+				"interface %s, disabling it\n",
+				bond->dev->name, slave->dev->name);
 
+			if (slave == bond->curr_active_slave) {
 				bond->current_arp_slave = NULL;
-
-			} else if (slave->state == BOND_STATE_BACKUP) {
-				pr_info(DRV_NAME
-				       ": %s: backup interface %s is now down\n",
-				       bond->dev->name, slave->dev->name);
-
-				bond_set_slave_inactive_flags(slave);
+				goto do_failover;
 			}
-			break;
+
+			continue;
 
 		default:
 			pr_err(DRV_NAME
 			       ": %s: impossible: new_link %d on slave %s\n",
 			       bond->dev->name, slave->new_link,
 			       slave->dev->name);
+			continue;
 		}
-	}
 
-	/*
-	 * No race with changes to primary via sysfs, as we hold rtnl.
-	 */
-	if (bond->primary_slave &&
-	    (bond->primary_slave != bond->curr_active_slave) &&
-	    (bond->primary_slave->link == BOND_LINK_UP)) {
+do_failover:
+		ASSERT_RTNL();
 		write_lock_bh(&bond->curr_slave_lock);
-		bond_change_active_slave(bond, bond->primary_slave);
+		bond_select_active_slave(bond);
 		write_unlock_bh(&bond->curr_slave_lock);
 	}
 
diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c
index 6971f6cd37fa..80ac56313981 100644
--- a/drivers/net/can/vcan.c
+++ b/drivers/net/can/vcan.c
@@ -80,7 +80,7 @@ static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
 	skb->dev       = dev;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-	netif_rx(skb);
+	netif_rx_ni(skb);
 }
 
 static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev)
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index b47201874d84..29234380e6c6 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1154,19 +1154,9 @@ static void __inline__ fec_request_mii_intr(struct net_device *dev)
 		printk("FEC: Could not allocate fec(MII) IRQ(66)!\n");
 }
 
-static void __inline__ fec_disable_phy_intr(void)
+static void __inline__ fec_disable_phy_intr(struct net_device *dev)
 {
-	volatile unsigned long *icrp;
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = 0x08000000;
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-	volatile unsigned long *icrp;
-	/* Acknowledge the interrupt */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = 0x0d000000;
+	free_irq(66, dev);
 }
 #endif
 
@@ -1398,7 +1388,7 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
 		writel(0, fep->hwp + FEC_MII_SPEED);
 		fep->phy_speed = 0;
 #ifdef HAVE_mii_link_interrupt
-		fec_disable_phy_intr();
+		fec_disable_phy_intr(dev);
 #endif
 	}
 }
@@ -1411,8 +1401,6 @@ mii_link_interrupt(int irq, void * dev_id)
 	struct	net_device *dev = dev_id;
 	struct fec_enet_private *fep = netdev_priv(dev);
 
-	fec_phy_ack_intr();
-
 	mii_do_cmd(dev, fep->phy->ack_int);
 	mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
 
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 6158c0f3b205..f8f5772557ce 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -49,11 +49,10 @@ static s32  igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
 static s32  igb_reset_hw_82575(struct e1000_hw *);
 static s32  igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
 static s32  igb_setup_copper_link_82575(struct e1000_hw *);
-static s32  igb_setup_fiber_serdes_link_82575(struct e1000_hw *);
+static s32  igb_setup_serdes_link_82575(struct e1000_hw *);
 static s32  igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
 static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
 static s32  igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
-static void igb_configure_pcs_link_82575(struct e1000_hw *);
 static s32  igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
 						 u16 *);
 static s32  igb_get_phy_id_82575(struct e1000_hw *);
@@ -105,16 +104,20 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	dev_spec->sgmii_active = false;
 
 	ctrl_ext = rd32(E1000_CTRL_EXT);
-	if ((ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) ==
-	    E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES) {
-		hw->phy.media_type = e1000_media_type_internal_serdes;
-		ctrl_ext |= E1000_CTRL_I2C_ENA;
-	} else if (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII) {
+	switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+	case E1000_CTRL_EXT_LINK_MODE_SGMII:
 		dev_spec->sgmii_active = true;
 		ctrl_ext |= E1000_CTRL_I2C_ENA;
-	} else {
+		break;
+	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+		hw->phy.media_type = e1000_media_type_internal_serdes;
+		ctrl_ext |= E1000_CTRL_I2C_ENA;
+		break;
+	default:
 		ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+		break;
 	}
+
 	wr32(E1000_CTRL_EXT, ctrl_ext);
 
 	/* Set mta register count */
@@ -134,7 +137,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	mac->ops.setup_physical_interface =
 		(hw->phy.media_type == e1000_media_type_copper)
 			? igb_setup_copper_link_82575
-			: igb_setup_fiber_serdes_link_82575;
+			: igb_setup_serdes_link_82575;
 
 	/* NVM initialization */
 	eecd = rd32(E1000_EECD);
@@ -379,6 +382,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
 	struct e1000_phy_info *phy = &hw->phy;
 	s32  ret_val = 0;
 	u16 phy_id;
+	u32 ctrl_ext;
 
 	/*
 	 * For SGMII PHYs, we try the list of possible addresses until
@@ -393,6 +397,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
 		goto out;
 	}
 
+	/* Power on sgmii phy if it is disabled */
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
+	wrfl();
+	msleep(300);
+
 	/*
 	 * The address field in the I2CCMD register is 3 bits and 0 is invalid.
 	 * Therefore, we need to test 1-7
@@ -418,9 +428,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
 		phy->addr = 0;
 		ret_val = -E1000_ERR_PHY;
 		goto out;
+	} else {
+		ret_val = igb_get_phy_id(hw);
 	}
 
-	ret_val = igb_get_phy_id(hw);
+	/* restore previous sfp cage power state */
+	wr32(E1000_CTRL_EXT, ctrl_ext);
 
 out:
 	return ret_val;
@@ -766,17 +779,18 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
 }
 
 /**
- *  igb_shutdown_fiber_serdes_link_82575 - Remove link during power down
+ *  igb_shutdown_serdes_link_82575 - Remove link during power down
  *  @hw: pointer to the HW structure
  *
  *  In the case of fiber serdes, shut down optics and PCS on driver unload
  *  when management pass thru is not enabled.
  **/
-void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw)
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
 {
 	u32 reg;
 
-	if (hw->phy.media_type != e1000_media_type_internal_serdes)
+	if (hw->phy.media_type != e1000_media_type_internal_serdes ||
+	    igb_sgmii_active_82575(hw))
 		return;
 
 	/* if the management interface is not enabled, then power down */
@@ -788,7 +802,7 @@ void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw)
 
 		/* shutdown the laser */
 		reg = rd32(E1000_CTRL_EXT);
-		reg |= E1000_CTRL_EXT_SDP7_DATA;
+		reg |= E1000_CTRL_EXT_SDP3_DATA;
 		wr32(E1000_CTRL_EXT, reg);
 
 		/* flush the write to verify completion */
@@ -927,6 +941,17 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
 	wr32(E1000_CTRL, ctrl);
 
+	ret_val = igb_setup_serdes_link_82575(hw);
+	if (ret_val)
+		goto out;
+
+	if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+		ret_val = hw->phy.ops.reset(hw);
+		if (ret_val) {
+			hw_dbg("Error resetting the PHY.\n");
+			goto out;
+		}
+	}
 	switch (hw->phy.type) {
 	case e1000_phy_m88:
 		ret_val = igb_copper_link_setup_m88(hw);
@@ -963,8 +988,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 		}
 	}
 
-	igb_configure_pcs_link_82575(hw);
-
 	/*
 	 * Check link status. Wait up to 100 microseconds for link to become
 	 * valid.
@@ -987,14 +1010,18 @@ out:
 }
 
 /**
- *  igb_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes
+ *  igb_setup_serdes_link_82575 - Setup link for fiber/serdes
  *  @hw: pointer to the HW structure
  *
  *  Configures speed and duplex for fiber and serdes links.
  **/
-static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
 {
-	u32 reg;
+	u32 ctrl_reg, reg;
+
+	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+	    !igb_sgmii_active_82575(hw))
+		return 0;
 
 	/*
 	 * On the 82575, SerDes loopback mode persists until it is
@@ -1004,26 +1031,38 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
 	 */
 	wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
 
-	/* Force link up, set 1gb, set both sw defined pins */
-	reg = rd32(E1000_CTRL);
-	reg |= E1000_CTRL_SLU |
-	       E1000_CTRL_SPD_1000 |
-	       E1000_CTRL_FRCSPD |
-	       E1000_CTRL_SWDPIN0 |
-	       E1000_CTRL_SWDPIN1;
-	wr32(E1000_CTRL, reg);
-
-	/* Power on phy for 82576 fiber adapters */
-	if (hw->mac.type == e1000_82576) {
-		reg = rd32(E1000_CTRL_EXT);
-		reg &= ~E1000_CTRL_EXT_SDP7_DATA;
-		wr32(E1000_CTRL_EXT, reg);
+	/* power on the sfp cage if present */
+	reg = rd32(E1000_CTRL_EXT);
+	reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+	wr32(E1000_CTRL_EXT, reg);
+
+	ctrl_reg = rd32(E1000_CTRL);
+	ctrl_reg |= E1000_CTRL_SLU;
+
+	if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
+		/* set both sw defined pins */
+		ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
+
+		/* Set switch control to serdes energy detect */
+		reg = rd32(E1000_CONNSW);
+		reg |= E1000_CONNSW_ENRGSRC;
+		wr32(E1000_CONNSW, reg);
+	}
+
+	reg = rd32(E1000_PCS_LCTL);
+
+	if (igb_sgmii_active_82575(hw)) {
+		/* allow time for SFP cage to power up phy */
+		msleep(300);
+
+		/* AN time out should be disabled for SGMII mode */
+		reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+	} else {
+		ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
+		            E1000_CTRL_FD | E1000_CTRL_FRCDPX;
 	}
 
-	/* Set switch control to serdes energy detect */
-	reg = rd32(E1000_CONNSW);
-	reg |= E1000_CONNSW_ENRGSRC;
-	wr32(E1000_CONNSW, reg);
+	wr32(E1000_CTRL, ctrl_reg);
 
 	/*
 	 * New SerDes mode allows for forcing speed or autonegotiating speed
@@ -1031,12 +1070,21 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
 	 * mode that will be compatible with older link partners and switches.
 	 * However, both are supported by the hardware and some drivers/tools.
 	 */
-	reg = rd32(E1000_PCS_LCTL);
 
 	reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
 		E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
 
-	if (hw->mac.autoneg) {
+	/*
+	 * We force flow control to prevent the CTRL register values from being
+	 * overwritten by the autonegotiated flow control values
+	 */
+	reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+
+	/*
+	 * we always set sgmii to autoneg since it is the phy that will be
+	 * forcing the link and the serdes is just a go-between
+	 */
+	if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) {
 		/* Set PCS register for autoneg */
 		reg |= E1000_PCS_LCTL_FSV_1000 |      /* Force 1000    */
 		       E1000_PCS_LCTL_FDV_FULL |      /* SerDes Full duplex */
@@ -1053,75 +1101,12 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
 		hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
 	}
 
-	if (hw->mac.type == e1000_82576) {
-		reg |= E1000_PCS_LCTL_FORCE_FCTRL;
-		igb_force_mac_fc(hw);
-	}
-
 	wr32(E1000_PCS_LCTL, reg);
 
-	return 0;
-}
-
-/**
- *  igb_configure_pcs_link_82575 - Configure PCS link
- *  @hw: pointer to the HW structure
- *
- *  Configure the physical coding sub-layer (PCS) link.  The PCS link is
- *  only used on copper connections where the serialized gigabit media
- *  independent interface (sgmii) is being used.  Configures the link
- *  for auto-negotiation or forces speed/duplex.
- **/
-static void igb_configure_pcs_link_82575(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 reg = 0;
-
-	if (hw->phy.media_type != e1000_media_type_copper ||
-	    !(igb_sgmii_active_82575(hw)))
-		return;
-
-	/* For SGMII, we need to issue a PCS autoneg restart */
-	reg = rd32(E1000_PCS_LCTL);
-
-	/* AN time out should be disabled for SGMII mode */
-	reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
-
-	if (mac->autoneg) {
-		/* Make sure forced speed and force link are not set */
-		reg &= ~(E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
-
-		/*
-		 * The PHY should be setup prior to calling this function.
-		 * All we need to do is restart autoneg and enable autoneg.
-		 */
-		reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE;
-	} else {
-		/* Set PCS register for forced speed */
-
-		/* Turn off bits for full duplex, speed, and autoneg */
-		reg &= ~(E1000_PCS_LCTL_FSV_1000 |
-			 E1000_PCS_LCTL_FSV_100 |
-			 E1000_PCS_LCTL_FDV_FULL |
-			 E1000_PCS_LCTL_AN_ENABLE);
-
-		/* Check for duplex first */
-		if (mac->forced_speed_duplex & E1000_ALL_FULL_DUPLEX)
-			reg |= E1000_PCS_LCTL_FDV_FULL;
-
-		/* Now set speed */
-		if (mac->forced_speed_duplex & E1000_ALL_100_SPEED)
-			reg |= E1000_PCS_LCTL_FSV_100;
-
-		/* Force speed and force link */
-		reg |= E1000_PCS_LCTL_FSD |
-		       E1000_PCS_LCTL_FORCE_LINK |
-		       E1000_PCS_LCTL_FLV_LINK_UP;
+	if (!igb_sgmii_active_82575(hw))
+		igb_force_mac_fc(hw);
 
-		hw_dbg("Wrote 0x%08X to PCS_LCTL to configure forced link\n",
-		       reg);
-	}
-	wr32(E1000_PCS_LCTL, reg);
+	return 0;
 }
 
 /**
@@ -1248,7 +1233,8 @@ static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
 	temp = rd32(E1000_LENERRS);
 
 	/* This register should not be read in copper configurations */
-	if (hw->phy.media_type == e1000_media_type_internal_serdes)
+	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+	    igb_sgmii_active_82575(hw))
 		temp = rd32(E1000_SCVPC);
 }
 
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index 8a1e6597061f..ebd146fd4e15 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -28,7 +28,7 @@
 #ifndef _E1000_82575_H_
 #define _E1000_82575_H_
 
-extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
 
 #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index c85829355d50..cb916833f303 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -44,7 +44,7 @@
 #define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
 
 /* Extended Device Control */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
 /* Physical Func Reset Done Indication */
 #define E1000_CTRL_EXT_PFRSTD    0x00004000
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index c1f4da630420..ee460600e74b 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -1565,9 +1565,12 @@ out:
  **/
 s32 igb_phy_sw_reset(struct e1000_hw *hw)
 {
-	s32 ret_val;
+	s32 ret_val = 0;
 	u16 phy_ctrl;
 
+	if (!(hw->phy.ops.read_reg))
+		goto out;
+
 	ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
 	if (ret_val)
 		goto out;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 943186b78483..d2639c4a086d 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -5320,7 +5320,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
 
 	*enable_wake = wufc || adapter->en_mng_pt;
 	if (!*enable_wake)
-		igb_shutdown_fiber_serdes_link_82575(hw);
+		igb_shutdown_serdes_link_82575(hw);
 
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index cb7f0c3c6e16..56b12f3192f1 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -322,14 +322,16 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 		break;
 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
-	case IXGBE_DEV_ID_82598EB_CX4:
-	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
 	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
 	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
 	case IXGBE_DEV_ID_82598EB_XF_LR:
 	case IXGBE_DEV_ID_82598EB_SFP_LOM:
 		media_type = ixgbe_media_type_fiber;
 		break;
+	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+		media_type = ixgbe_media_type_cx4;
+		break;
 	case IXGBE_DEV_ID_82598AT:
 	case IXGBE_DEV_ID_82598AT2:
 		media_type = ixgbe_media_type_copper;
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 61af47e75aa1..2ec58dcdb82b 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -337,6 +337,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82599_SFP:
 		media_type = ixgbe_media_type_fiber;
 		break;
+	case IXGBE_DEV_ID_82599_CX4:
+		media_type = ixgbe_media_type_cx4;
+		break;
 	default:
 		media_type = ixgbe_media_type_unknown;
 		break;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 45bf8b9716e3..59ad9590e700 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -97,6 +97,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
+	 board_82599 },
 
 	/* required last entry */
 	{0, }
@@ -2055,6 +2057,8 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 
 		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
 			rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
+		else
+			rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED;
 
 #ifdef IXGBE_FCOE
 		if (netdev->features & NETIF_F_FCOE_MTU) {
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 8ba90eec1dc9..8761d7899f7d 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -49,6 +49,7 @@
 #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM      0x10E1
 #define IXGBE_DEV_ID_82598EB_XF_LR       0x10F4
 #define IXGBE_DEV_ID_82599_KX4           0x10F7
+#define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 
@@ -2143,6 +2144,7 @@ enum ixgbe_media_type {
 	ixgbe_media_type_fiber,
 	ixgbe_media_type_copper,
 	ixgbe_media_type_backplane,
+	ixgbe_media_type_cx4,
 	ixgbe_media_type_virtual
 };
 
diff --git a/drivers/net/mlx4/catas.c b/drivers/net/mlx4/catas.c
index aa9674b7f19c..f599294fa8ab 100644
--- a/drivers/net/mlx4/catas.c
+++ b/drivers/net/mlx4/catas.c
@@ -96,12 +96,17 @@ static void catas_reset(struct work_struct *work)
 	spin_unlock_irq(&catas_lock);
 
 	list_for_each_entry_safe(priv, tmppriv, &tlist, catas_err.list) {
+		struct pci_dev *pdev = priv->dev.pdev;
+
 		ret = mlx4_restart_one(priv->dev.pdev);
-		dev = &priv->dev;
+		/* 'priv' now is not valid */
 		if (ret)
-			mlx4_err(dev, "Reset failed (%d)\n", ret);
-		else
+			printk(KERN_ERR "mlx4 %s: Reset failed (%d)\n",
+				pci_name(pdev), ret);
+		else {
+			dev  = pci_get_drvdata(pdev);
 			mlx4_dbg(dev, "Reset succeeded\n");
+		}
 	}
 }
 
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 90a94d215831..97db1c732342 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1750,11 +1750,11 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
 	/* too generic! */
 	/* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index e0f9219a0aea..cc394d073755 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -229,7 +229,7 @@ static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel);
 static atomic_t pppol2tp_tunnel_count;
 static atomic_t pppol2tp_session_count;
 static struct ppp_channel_ops pppol2tp_chan_ops = { pppol2tp_xmit , NULL };
-static struct proto_ops pppol2tp_ops;
+static const struct proto_ops pppol2tp_ops;
 
 /* per-net private data for this module */
 static int pppol2tp_net_id;
@@ -2574,7 +2574,7 @@ static const struct file_operations pppol2tp_proc_fops = {
  * Init and cleanup
  *****************************************************************************/
 
-static struct proto_ops pppol2tp_ops = {
+static const struct proto_ops pppol2tp_ops = {
 	.family		= AF_PPPOX,
 	.owner		= THIS_MODULE,
 	.release	= pppol2tp_release,
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 00bc65a0aac9..4bb52e9cd371 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -65,8 +65,8 @@
 #define RX_DEF_PENDING		RX_MAX_PENDING
 
 /* This is the worst case number of transmit list elements for a single skb:
-   VLAN + TSO + CKSUM + Data + skb_frags * DMA */
-#define MAX_SKB_TX_LE	(4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
+   VLAN:GSO + CKSUM + Data + skb_frags * DMA */
+#define MAX_SKB_TX_LE	(2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
 #define TX_MIN_PENDING		(MAX_SKB_TX_LE+1)
 #define TX_MAX_PENDING		4096
 #define TX_DEF_PENDING		127
@@ -1567,11 +1567,13 @@ static unsigned tx_le_req(const struct sk_buff *skb)
 {
 	unsigned count;
 
-	count = sizeof(dma_addr_t) / sizeof(u32);
-	count += skb_shinfo(skb)->nr_frags * count;
+	count = (skb_shinfo(skb)->nr_frags + 1)
+		* (sizeof(dma_addr_t) / sizeof(u32));
 
 	if (skb_is_gso(skb))
 		++count;
+	else if (sizeof(dma_addr_t) == sizeof(u32))
+		++count;	/* possible vlan */
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL)
 		++count;
@@ -4548,16 +4550,18 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	if (hw->ports > 1) {
 		struct net_device *dev1;
 
+		err = -ENOMEM;
 		dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
-		if (!dev1)
-			dev_warn(&pdev->dev, "allocation for second device failed\n");
-		else if ((err = register_netdev(dev1))) {
+		if (dev1 && (err = register_netdev(dev1)) == 0)
+			sky2_show_addr(dev1);
+		else {
 			dev_warn(&pdev->dev,
 				 "register of second port failed (%d)\n", err);
 			hw->dev[1] = NULL;
-			free_netdev(dev1);
-		} else
-			sky2_show_addr(dev1);
+			hw->ports = 1;
+			if (dev1)
+				free_netdev(dev1);
+		}
 	}
 
 	setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 784b631cfa3c..3911be7c0cba 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -83,34 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 	}
 }
 
-#elif defined(CONFIG_BLACKFIN)
-
-#define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
-#define RPC_LSA_DEFAULT		RPC_LED_100_10
-#define RPC_LSB_DEFAULT		RPC_LED_TX_RX
-
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-# if defined(CONFIG_BF561)
-#define SMC_CAN_USE_32BIT	1
-# else
-#define SMC_CAN_USE_32BIT	0
-# endif
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT      	1
-#define SMC_USE_BFIN_DMA	0
-
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-# if SMC_CAN_USE_32BIT
-#define SMC_inl(a, r)		readl((a) + (r))
-#define SMC_outl(v, a, r)	writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
-# endif
-
 #elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
 
 /* We can only do 16-bit reads and writes in the static memory space. */
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
index 97e54d9d03ce..33d5c579c5ad 100644
--- a/drivers/net/usb/cdc-phonet.c
+++ b/drivers/net/usb/cdc-phonet.c
@@ -264,7 +264,6 @@ static int usbpn_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	switch (cmd) {
 	case SIOCPNGAUTOCONF:
 		req->ifr_phonet_autoconf.device = PN_DEV_PC;
-		printk(KERN_CRIT"device is PN_DEV_PC\n");
 		return 0;
 	}
 	return -ENOIOCTLCMD;
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ad89d23968df..49ea9c92b7e6 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -5,6 +5,7 @@
 menuconfig WLAN
 	bool "Wireless LAN"
 	depends on !S390
+	default y
 	---help---
 	  This section contains all the pre 802.11 and 802.11 wireless
 	  device drivers. For a complete list of drivers and documentation
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index a7cbb07988cf..2b493742ef10 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -327,7 +327,8 @@ static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
 					     aniState->firstepLevel + 1);
 		return;
 	} else {
-		if (conf->channel->band == IEEE80211_BAND_2GHZ) {
+		if ((conf->channel->band == IEEE80211_BAND_2GHZ) &&
+		    !conf_is_ht(conf)) {
 			if (!aniState->ofdmWeakSigDetectOff)
 				ath9k_hw_ani_control(ah,
 				     ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
@@ -369,7 +370,8 @@ static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
 			ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
 					     aniState->firstepLevel + 1);
 	} else {
-		if (conf->channel->band == IEEE80211_BAND_2GHZ) {
+		if ((conf->channel->band == IEEE80211_BAND_2GHZ) &&
+		    !conf_is_ht(conf)) {
 			if (aniState->firstepLevel > 0)
 				ath9k_hw_ani_control(ah,
 					     ATH9K_ANI_FIRSTEP_LEVEL, 0);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7a9a3fa55425..e789792a36bc 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2289,11 +2289,7 @@ static int b43_upload_microcode(struct b43_wldev *dev)
 			err = -ENODEV;
 			goto error;
 		}
-		msleep_interruptible(50);
-		if (signal_pending(current)) {
-			err = -EINTR;
-			goto error;
-		}
+		msleep(50);
 	}
 	b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);	/* dummy read */
 
@@ -4287,6 +4283,8 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 	if (!dev->suspend_in_progress)
 		b43_rng_init(wl);
 
+	ieee80211_wake_queues(dev->wl->hw);
+
 	b43_set_status(dev, B43_STAT_INITIALIZED);
 
 	if (!dev->suspend_in_progress)
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 6fe122f18c0d..eb57d1ea361f 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -875,15 +875,16 @@ void hostap_setup_dev(struct net_device *dev, local_info_t *local,
 
 	switch(type) {
 	case HOSTAP_INTERFACE_AP:
+		dev->tx_queue_len = 0;	/* use main radio device queue */
 		dev->netdev_ops = &hostap_mgmt_netdev_ops;
 		dev->type = ARPHRD_IEEE80211;
 		dev->header_ops = &hostap_80211_ops;
 		break;
 	case HOSTAP_INTERFACE_MASTER:
-		dev->tx_queue_len = 0;	/* use main radio device queue */
 		dev->netdev_ops = &hostap_master_ops;
 		break;
 	default:
+		dev->tx_queue_len = 0;	/* use main radio device queue */
 		dev->netdev_ops = &hostap_netdev_ops;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 6a13bfbc9d98..ca61d3796cef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2346,6 +2346,7 @@ struct iwl_cfg iwl4965_agn_cfg = {
 	.mod_params = &iwl4965_mod_params,
 	.use_isr_legacy = true,
 	.ht_greenfield_support = false,
+	.broken_powersave = true,
 };
 
 /* Module firmware */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 40b207aa8fef..346dc06fa7b7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -760,6 +760,7 @@ static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
 	u16 high_low;
 	u8 switch_to_legacy = 0;
 	u8 is_green = lq_sta->is_green;
+	struct iwl_priv *priv = lq_sta->drv;
 
 	/* check if we need to switch from HT to legacy rates.
 	 * assumption is that mandatory rates (1Mbps or 6Mbps)
@@ -773,7 +774,8 @@ static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
 			tbl->lq_type = LQ_G;
 
 		if (num_of_ant(tbl->ant_type) > 1)
-			tbl->ant_type = ANT_A;/*FIXME:RS*/
+			tbl->ant_type =
+				first_antenna(priv->hw_params.valid_tx_ant);
 
 		tbl->is_ht40 = 0;
 		tbl->is_SGI = 0;
@@ -883,6 +885,12 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 		mac_index &= RATE_MCS_CODE_MSK;	/* Remove # of streams */
 		if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE))
 			mac_index++;
+		/*
+		 * mac80211 HT index is always zero-indexed; we need to move
+		 * HT OFDM rates after CCK rates in 2.4 GHz band
+		 */
+		if (priv->band == IEEE80211_BAND_2GHZ)
+			mac_index += IWL_FIRST_OFDM_RATE;
 	}
 
 	if ((mac_index < 0) ||
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index acfd7b40afb8..fd26c0dc9c54 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1585,9 +1585,12 @@ int iwl_setup_mac(struct iwl_priv *priv)
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM |
 		    IEEE80211_HW_AMPDU_AGGREGATION |
-		    IEEE80211_HW_SPECTRUM_MGMT |
-		    IEEE80211_HW_SUPPORTS_PS |
-		    IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+		    IEEE80211_HW_SPECTRUM_MGMT;
+
+	if (!priv->cfg->broken_powersave)
+		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
+			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index c04d2a270819..7ff9ffb2b702 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -252,6 +252,7 @@ struct iwl_cfg {
 	const u16 max_ll_items;
 	const bool shadow_ram_support;
 	const bool ht_greenfield_support;
+	const bool broken_powersave;
 };
 
 /***************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 4ec6a8307cc6..60be976afff8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -292,8 +292,9 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 	else
 		dtimper = 1;
 
-	/* TT power setting overwrites everything */
-	if (tt->state >= IWL_TI_1)
+	if (priv->cfg->broken_powersave)
+		iwl_power_sleep_cam_cmd(priv, &cmd);
+	else if (tt->state >= IWL_TI_1)
 		iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper);
 	else if (!enabled)
 		iwl_power_sleep_cam_cmd(priv, &cmd);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 8150c5c3a16b..b90adcb73b06 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -239,26 +239,22 @@ void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
+	struct sk_buff *skb;
 	unsigned long flags;
 
 	while (1) {
 		spin_lock_irqsave(&rxq->lock, flags);
-
 		if (list_empty(&rxq->rx_used)) {
 			spin_unlock_irqrestore(&rxq->lock, flags);
 			return;
 		}
-		element = rxq->rx_used.next;
-		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
-		list_del(element);
-
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		/* Alloc a new receive buffer */
-		rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
+		skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
 						priority);
 
-		if (!rxb->skb) {
+		if (!skb) {
 			IWL_CRIT(priv, "Can not allocate SKB buffers\n");
 			/* We don't reschedule replenish work here -- we will
 			 * call the restock method and if it still needs
@@ -266,6 +262,20 @@ void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 			break;
 		}
 
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		element = rxq->rx_used.next;
+		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		rxb->skb = skb;
 		/* Get physical address of RB/SKB */
 		rxb->real_dma_addr = pci_map_single(
 					priv->pci_dev,
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 2238c9f2018c..090966837f3c 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1134,6 +1134,7 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
+	struct sk_buff *skb;
 	unsigned long flags;
 
 	while (1) {
@@ -1143,17 +1144,11 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 			spin_unlock_irqrestore(&rxq->lock, flags);
 			return;
 		}
-
-		element = rxq->rx_used.next;
-		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
-		list_del(element);
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		/* Alloc a new receive buffer */
-		rxb->skb =
-		    alloc_skb(priv->hw_params.rx_buf_size,
-				priority);
-		if (!rxb->skb) {
+		skb = alloc_skb(priv->hw_params.rx_buf_size, priority);
+		if (!skb) {
 			if (net_ratelimit())
 				IWL_CRIT(priv, ": Can not allocate SKB buffers\n");
 			/* We don't reschedule replenish work here -- we will
@@ -1162,6 +1157,19 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 			break;
 		}
 
+		spin_lock_irqsave(&rxq->lock, flags);
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		element = rxq->rx_used.next;
+		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		rxb->skb = skb;
+
 		/* If radiotap head is required, reserve some headroom here.
 		 * The physical head count is a variable rx_stats->phy_count.
 		 * We reserve 4 bytes here. Plus these extra bytes, the
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index e44460ff149c..17e199546eeb 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -67,6 +67,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x0bf8, 0x1009)},   /* FUJITSU E-5400 USB D1700*/
 	{USB_DEVICE(0x0cde, 0x0006)},   /* Medion MD40900 */
 	{USB_DEVICE(0x0cde, 0x0008)},	/* Sagem XG703A */
+	{USB_DEVICE(0x0cde, 0x0015)},	/* Zcomax XG-705A */
 	{USB_DEVICE(0x0d8e, 0x3762)},	/* DLink DWL-G120 Cohiba */
 	{USB_DEVICE(0x124a, 0x4025)},	/* IOGear GWU513 (GW3887IK chip) */
 	{USB_DEVICE(0x1260, 0xee22)},	/* SMC 2862W-G version 2 */
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index d9169b47ac42..27298b19d5bd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -644,11 +644,10 @@ static int wl1271_op_config_interface(struct ieee80211_hw *hw,
 {
 	struct wl1271 *wl = hw->priv;
 	struct sk_buff *beacon;
-	DECLARE_MAC_BUF(mac);
 	int ret;
 
-	wl1271_debug(DEBUG_MAC80211, "mac80211 config_interface bssid %s",
-		     print_mac(mac, conf->bssid));
+	wl1271_debug(DEBUG_MAC80211, "mac80211 config_interface bssid %pM",
+		     conf->bssid);
 	wl1271_dump_ascii(DEBUG_MAC80211, "ssid: ", conf->ssid,
 			  conf->ssid_len);
 
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f4317798e47c..2dc42bbf6fe9 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -82,6 +82,13 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_WM831X
+	tristate "Wolfson Microelcronics WM831x PMIC regulators"
+	depends on MFD_WM831X
+	help
+	  Support the voltage and current regulators of the WM831x series
+	  of PMIC devices.
+
 config REGULATOR_WM8350
 	tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
 	depends on MFD_WM8350
@@ -117,4 +124,28 @@ config REGULATOR_LP3971
 	 Say Y here to support the voltage regulators and convertors
 	 on National Semiconductors LP3971 PMIC
 
+config REGULATOR_PCAP
+	tristate "PCAP2 regulator driver"
+	depends on EZX_PCAP
+	help
+	 This driver provides support for the voltage regulators of the
+	 PCAP2 PMIC.
+
+config REGULATOR_MC13783
+	tristate "Support regulators on Freescale MC13783 PMIC"
+	depends on MFD_MC13783
+	help
+	  Say y here to support the regulators found on the Freescale MC13783
+	  PMIC.
+
+config REGULATOR_AB3100
+	tristate "ST-Ericsson AB3100 Regulator functions"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	 These regulators correspond to functionality in the
+	 AB3100 analog baseband dealing with power regulators
+	 for the system.
+
 endif
+
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4d762c4cccfd..768b3316d6eb 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -12,9 +12,15 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
+obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o
+obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
new file mode 100644
index 000000000000..49aeee823a25
--- /dev/null
+++ b/drivers/regulator/ab3100.c
@@ -0,0 +1,700 @@
+/*
+ * drivers/regulator/ab3100.c
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level control of the AB3100 IC Low Dropout (LDO)
+ * regulators, external regulator and buck converter
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/ab3100.h>
+
+/* LDO registers and some handy masking definitions for AB3100 */
+#define AB3100_LDO_A		0x40
+#define AB3100_LDO_C		0x41
+#define AB3100_LDO_D		0x42
+#define AB3100_LDO_E		0x43
+#define AB3100_LDO_E_SLEEP	0x44
+#define AB3100_LDO_F		0x45
+#define AB3100_LDO_G		0x46
+#define AB3100_LDO_H		0x47
+#define AB3100_LDO_H_SLEEP_MODE	0
+#define AB3100_LDO_H_SLEEP_EN	2
+#define AB3100_LDO_ON		4
+#define AB3100_LDO_H_VSEL_AC	5
+#define AB3100_LDO_K		0x48
+#define AB3100_LDO_EXT		0x49
+#define AB3100_BUCK		0x4A
+#define AB3100_BUCK_SLEEP	0x4B
+#define AB3100_REG_ON_MASK	0x10
+
+/**
+ * struct ab3100_regulator
+ * A struct passed around the individual regulator functions
+ * @platform_device: platform device holding this regulator
+ * @ab3100: handle to the AB3100 parent chip
+ * @plfdata: AB3100 platform data passed in at probe time
+ * @regreg: regulator register number in the AB3100
+ * @fixed_voltage: a fixed voltage for this regulator, if this
+ *          0 the voltages array is used instead.
+ * @typ_voltages: an array of available typical voltages for
+ *          this regulator
+ * @voltages_len: length of the array of available voltages
+ */
+struct ab3100_regulator {
+	struct regulator_dev *rdev;
+	struct ab3100 *ab3100;
+	struct ab3100_platform_data *plfdata;
+	u8 regreg;
+	int fixed_voltage;
+	int const *typ_voltages;
+	u8 voltages_len;
+};
+
+/* The order in which registers are initialized */
+static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
+	AB3100_LDO_A,
+	AB3100_LDO_C,
+	AB3100_LDO_E,
+	AB3100_LDO_E_SLEEP,
+	AB3100_LDO_F,
+	AB3100_LDO_G,
+	AB3100_LDO_H,
+	AB3100_LDO_K,
+	AB3100_LDO_EXT,
+	AB3100_BUCK,
+	AB3100_BUCK_SLEEP,
+	AB3100_LDO_D,
+};
+
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+
+static const int const ldo_e_buck_typ_voltages[] = {
+	1800000,
+	1400000,
+	1300000,
+	1200000,
+	1100000,
+	1050000,
+	900000,
+};
+
+static const int const ldo_f_typ_voltages[] = {
+	1800000,
+	1400000,
+	1300000,
+	1200000,
+	1100000,
+	1050000,
+	2500000,
+	2650000,
+};
+
+static const int const ldo_g_typ_voltages[] = {
+	2850000,
+	2750000,
+	1800000,
+	1500000,
+};
+
+static const int const ldo_h_typ_voltages[] = {
+	2750000,
+	1800000,
+	1500000,
+	1200000,
+};
+
+static const int const ldo_k_typ_voltages[] = {
+	2750000,
+	1800000,
+};
+
+
+/* The regulator devices */
+static struct ab3100_regulator
+ab3100_regulators[AB3100_NUM_REGULATORS] = {
+	{
+		.regreg = AB3100_LDO_A,
+		.fixed_voltage = LDO_A_VOLTAGE,
+	},
+	{
+		.regreg = AB3100_LDO_C,
+		.fixed_voltage = LDO_C_VOLTAGE,
+	},
+	{
+		.regreg = AB3100_LDO_D,
+		.fixed_voltage = LDO_D_VOLTAGE,
+	},
+	{
+		.regreg = AB3100_LDO_E,
+		.typ_voltages = ldo_e_buck_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_F,
+		.typ_voltages = ldo_f_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_f_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_G,
+		.typ_voltages = ldo_g_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_g_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_H,
+		.typ_voltages = ldo_h_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_h_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_K,
+		.typ_voltages = ldo_k_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_k_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_EXT,
+		/* No voltages for the external regulator */
+	},
+	{
+		.regreg = AB3100_BUCK,
+		.typ_voltages = ldo_e_buck_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+	},
+};
+
+/*
+ * General functions for enable, disable and is_enabled used for
+ * LDO: A,C,E,F,G,H,K,EXT and BUCK
+ */
+static int ab3100_enable_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	int err;
+	u8 regval;
+
+	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+						&regval);
+	if (err) {
+		dev_warn(&reg->dev, "failed to get regid %d value\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* The regulator is already on, no reason to go further */
+	if (regval & AB3100_REG_ON_MASK)
+		return 0;
+
+	regval |= AB3100_REG_ON_MASK;
+
+	err = ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+						regval);
+	if (err) {
+		dev_warn(&reg->dev, "failed to set regid %d value\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* Per-regulator power on delay from spec */
+	switch (abreg->regreg) {
+	case AB3100_LDO_A: /* Fallthrough */
+	case AB3100_LDO_C: /* Fallthrough */
+	case AB3100_LDO_D: /* Fallthrough */
+	case AB3100_LDO_E: /* Fallthrough */
+	case AB3100_LDO_H: /* Fallthrough */
+	case AB3100_LDO_K:
+		udelay(200);
+		break;
+	case AB3100_LDO_F:
+		udelay(600);
+		break;
+	case AB3100_LDO_G:
+		udelay(400);
+		break;
+	case AB3100_BUCK:
+		mdelay(1);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ab3100_disable_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	int err;
+	u8 regval;
+
+	/*
+	 * LDO D is a special regulator. When it is disabled, the entire
+	 * system is shut down. So this is handled specially.
+	 */
+	if (abreg->regreg == AB3100_LDO_D) {
+		int i;
+
+		dev_info(&reg->dev, "disabling LDO D - shut down system\n");
+		/*
+		 * Set regulators to default values, ignore any errors,
+		 * we're going DOWN
+		 */
+		for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
+			(void) ab3100_set_register_interruptible(abreg->ab3100,
+					ab3100_reg_init_order[i],
+					abreg->plfdata->reg_initvals[i]);
+		}
+
+		/* Setting LDO D to 0x00 cuts the power to the SoC */
+		return ab3100_set_register_interruptible(abreg->ab3100,
+							 AB3100_LDO_D, 0x00U);
+
+	}
+
+	/*
+	 * All other regulators are handled here
+	 */
+	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+						&regval);
+	if (err) {
+		dev_err(&reg->dev, "unable to get register 0x%x\n",
+			abreg->regreg);
+		return err;
+	}
+	regval &= ~AB3100_REG_ON_MASK;
+	return ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+						 regval);
+}
+
+static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+
+	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+						&regval);
+	if (err) {
+		dev_err(&reg->dev, "unable to get register 0x%x\n",
+			abreg->regreg);
+		return err;
+	}
+
+	return regval & AB3100_REG_ON_MASK;
+}
+
+static int ab3100_list_voltage_regulator(struct regulator_dev *reg,
+					 unsigned selector)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+
+	if (selector > abreg->voltages_len)
+		return -EINVAL;
+	return abreg->typ_voltages[selector];
+}
+
+static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+
+	/* Return the voltage for fixed regulators immediately */
+	if (abreg->fixed_voltage)
+		return abreg->fixed_voltage;
+
+	/*
+	 * For variable types, read out setting and index into
+	 * supplied voltage list.
+	 */
+	err = ab3100_get_register_interruptible(abreg->ab3100,
+						abreg->regreg, &regval);
+	if (err) {
+		dev_warn(&reg->dev,
+			 "failed to get regulator value in register %02x\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* The 3 highest bits index voltages */
+	regval &= 0xE0;
+	regval >>= 5;
+
+	if (regval > abreg->voltages_len) {
+		dev_err(&reg->dev,
+			"regulator register %02x contains an illegal voltage setting\n",
+			abreg->regreg);
+		return -EINVAL;
+	}
+
+	return abreg->typ_voltages[regval];
+}
+
+static int ab3100_get_best_voltage_index(struct regulator_dev *reg,
+				   int min_uV, int max_uV)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	int i;
+	int bestmatch;
+	int bestindex;
+
+	/*
+	 * Locate the minimum voltage fitting the criteria on
+	 * this regulator. The switchable voltages are not
+	 * in strict falling order so we need to check them
+	 * all for the best match.
+	 */
+	bestmatch = INT_MAX;
+	bestindex = -1;
+	for (i = 0; i < abreg->voltages_len; i++) {
+		if (abreg->typ_voltages[i] <= max_uV &&
+		    abreg->typ_voltages[i] >= min_uV &&
+		    abreg->typ_voltages[i] < bestmatch) {
+			bestmatch = abreg->typ_voltages[i];
+			bestindex = i;
+		}
+	}
+
+	if (bestindex < 0) {
+		dev_warn(&reg->dev, "requested %d<=x<=%d uV, out of range!\n",
+			 min_uV, max_uV);
+		return -EINVAL;
+	}
+	return bestindex;
+}
+
+static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
+					int min_uV, int max_uV)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+	int bestindex;
+
+	bestindex = ab3100_get_best_voltage_index(reg, min_uV, max_uV);
+	if (bestindex < 0)
+		return bestindex;
+
+	err = ab3100_get_register_interruptible(abreg->ab3100,
+						abreg->regreg, &regval);
+	if (err) {
+		dev_warn(&reg->dev,
+			 "failed to get regulator register %02x\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* The highest three bits control the variable regulators */
+	regval &= ~0xE0;
+	regval |= (bestindex << 5);
+
+	err = ab3100_set_register_interruptible(abreg->ab3100,
+						abreg->regreg, regval);
+	if (err)
+		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
+			abreg->regreg);
+
+	return err;
+}
+
+static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
+						int uV)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+	int bestindex;
+	u8 targetreg;
+
+	if (abreg->regreg == AB3100_LDO_E)
+		targetreg = AB3100_LDO_E_SLEEP;
+	else if (abreg->regreg == AB3100_BUCK)
+		targetreg = AB3100_BUCK_SLEEP;
+	else
+		return -EINVAL;
+
+	/* LDO E and BUCK have special suspend voltages you can set */
+	bestindex = ab3100_get_best_voltage_index(reg, uV, uV);
+
+	err = ab3100_get_register_interruptible(abreg->ab3100,
+						targetreg, &regval);
+	if (err) {
+		dev_warn(&reg->dev,
+			 "failed to get regulator register %02x\n",
+			 targetreg);
+		return err;
+	}
+
+	/* The highest three bits control the variable regulators */
+	regval &= ~0xE0;
+	regval |= (bestindex << 5);
+
+	err = ab3100_set_register_interruptible(abreg->ab3100,
+						targetreg, regval);
+	if (err)
+		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
+			abreg->regreg);
+
+	return err;
+}
+
+/*
+ * The external regulator can just define a fixed voltage.
+ */
+static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+
+	return abreg->plfdata->external_voltage;
+}
+
+static struct regulator_ops regulator_ops_fixed = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator,
+};
+
+static struct regulator_ops regulator_ops_variable = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator,
+	.set_voltage = ab3100_set_voltage_regulator,
+	.list_voltage = ab3100_list_voltage_regulator,
+};
+
+static struct regulator_ops regulator_ops_variable_sleepable = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator,
+	.set_voltage = ab3100_set_voltage_regulator,
+	.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
+	.list_voltage = ab3100_list_voltage_regulator,
+};
+
+/*
+ * LDO EXT is an external regulator so it is really
+ * not possible to set any voltage locally here, AB3100
+ * is an on/off switch plain an simple. The external
+ * voltage is defined in the board set-up if any.
+ */
+static struct regulator_ops regulator_ops_external = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator_external,
+};
+
+static struct regulator_desc
+ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
+	{
+		.name = "LDO_A",
+		.id   = AB3100_LDO_A,
+		.ops  = &regulator_ops_fixed,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_C",
+		.id   = AB3100_LDO_C,
+		.ops  = &regulator_ops_fixed,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_D",
+		.id   = AB3100_LDO_D,
+		.ops  = &regulator_ops_fixed,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_E",
+		.id   = AB3100_LDO_E,
+		.ops  = &regulator_ops_variable_sleepable,
+		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_F",
+		.id   = AB3100_LDO_F,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_G",
+		.id   = AB3100_LDO_G,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_H",
+		.id   = AB3100_LDO_H,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_K",
+		.id   = AB3100_LDO_K,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_EXT",
+		.id   = AB3100_LDO_EXT,
+		.ops  = &regulator_ops_external,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "BUCK",
+		.id   = AB3100_BUCK,
+		.ops  = &regulator_ops_variable_sleepable,
+		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+};
+
+/*
+ * NOTE: the following functions are regulators pluralis - it is the
+ * binding to the AB3100 core driver and the parent platform device
+ * for all the different regulators.
+ */
+
+static int __init ab3100_regulators_probe(struct platform_device *pdev)
+{
+	struct ab3100_platform_data *plfdata = pdev->dev.platform_data;
+	struct ab3100 *ab3100 = platform_get_drvdata(pdev);
+	int err = 0;
+	u8 data;
+	int i;
+
+	/* Check chip state */
+	err = ab3100_get_register_interruptible(ab3100,
+						AB3100_LDO_D, &data);
+	if (err) {
+		dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
+		return err;
+	}
+	if (data & 0x10)
+		dev_notice(&pdev->dev,
+			   "chip is already in active mode (Warm start)\n");
+	else
+		dev_notice(&pdev->dev,
+			   "chip is in inactive mode (Cold start)\n");
+
+	/* Set up regulators */
+	for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
+		err = ab3100_set_register_interruptible(ab3100,
+					ab3100_reg_init_order[i],
+					plfdata->reg_initvals[i]);
+		if (err) {
+			dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
+				err);
+			return err;
+		}
+	}
+
+	if (err) {
+		dev_err(&pdev->dev,
+			"LDO D regulator initialization failed with error %d\n",
+			err);
+		return err;
+	}
+
+	/* Register the regulators */
+	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
+		struct ab3100_regulator *reg = &ab3100_regulators[i];
+		struct regulator_dev *rdev;
+
+		/*
+		 * Initialize per-regulator struct.
+		 * Inherit platform data, this comes down from the
+		 * i2c boarddata, from the machine. So if you want to
+		 * see what it looks like for a certain machine, go
+		 * into the machine I2C setup.
+		 */
+		reg->ab3100 = ab3100;
+		reg->plfdata = plfdata;
+
+		/*
+		 * Register the regulator, pass around
+		 * the ab3100_regulator struct
+		 */
+		rdev = regulator_register(&ab3100_regulator_desc[i],
+					  &pdev->dev,
+					  &plfdata->reg_constraints[i],
+					  reg);
+
+		if (IS_ERR(rdev)) {
+			err = PTR_ERR(rdev);
+			dev_err(&pdev->dev,
+				"%s: failed to register regulator %s err %d\n",
+				__func__, ab3100_regulator_desc[i].name,
+				err);
+			i--;
+			/* remove the already registered regulators */
+			while (i > 0) {
+				regulator_unregister(ab3100_regulators[i].rdev);
+				i--;
+			}
+			return err;
+		}
+
+		/* Then set a pointer back to the registered regulator */
+		reg->rdev = rdev;
+	}
+
+	return 0;
+}
+
+static int __exit ab3100_regulators_remove(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
+		struct ab3100_regulator *reg = &ab3100_regulators[i];
+
+		regulator_unregister(reg->rdev);
+	}
+	return 0;
+}
+
+static struct platform_driver ab3100_regulators_driver = {
+	.driver = {
+		.name  = "ab3100-regulators",
+		.owner = THIS_MODULE,
+	},
+	.probe = ab3100_regulators_probe,
+	.remove = __exit_p(ab3100_regulators_remove),
+};
+
+static __init int ab3100_regulators_init(void)
+{
+	return platform_driver_register(&ab3100_regulators_driver);
+}
+
+static __exit void ab3100_regulators_exit(void)
+{
+	platform_driver_register(&ab3100_regulators_driver);
+}
+
+subsys_initcall(ab3100_regulators_init);
+module_exit(ab3100_regulators_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 Regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ab3100-regulators");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 98c3a74e9949..91ba9bfaa706 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1864,6 +1864,30 @@ int regulator_notifier_call_chain(struct regulator_dev *rdev,
 }
 EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
 
+/**
+ * regulator_mode_to_status - convert a regulator mode into a status
+ *
+ * @mode: Mode to convert
+ *
+ * Convert a regulator mode into a status.
+ */
+int regulator_mode_to_status(unsigned int mode)
+{
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		return REGULATOR_STATUS_FAST;
+	case REGULATOR_MODE_NORMAL:
+		return REGULATOR_STATUS_NORMAL;
+	case REGULATOR_MODE_IDLE:
+		return REGULATOR_STATUS_IDLE;
+	case REGULATOR_STATUS_STANDBY:
+		return REGULATOR_STATUS_STANDBY;
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(regulator_mode_to_status);
+
 /*
  * To avoid cluttering sysfs (and memory) with useless state, only
  * create attributes that can be meaningfully displayed.
diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783.c
new file mode 100644
index 000000000000..710211f67449
--- /dev/null
+++ b/drivers/regulator/mc13783.c
@@ -0,0 +1,410 @@
+/*
+ * Regulator Driver for Freescale MC13783 PMIC
+ *
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/mc13783-private.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/driver.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+struct mc13783_regulator {
+	struct regulator_desc desc;
+	int reg;
+	int enable_bit;
+};
+
+static struct regulator_ops mc13783_regulator_ops;
+
+static struct mc13783_regulator mc13783_regulators[] = {
+	[MC13783_SW_SW3] = {
+		.desc = {
+			.name	= "SW_SW3",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_SW_SW3,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_SWITCHERS_5,
+		.enable_bit = MC13783_SWCTRL_SW3_EN,
+	},
+	[MC13783_SW_PLL] = {
+		.desc = {
+			.name	= "SW_PLL",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_SW_PLL,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_SWITCHERS_4,
+		.enable_bit = MC13783_SWCTRL_PLL_EN,
+	},
+	[MC13783_REGU_VAUDIO] = {
+		.desc = {
+			.name	= "REGU_VAUDIO",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VAUDIO,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VAUDIO_EN,
+	},
+	[MC13783_REGU_VIOHI] = {
+		.desc = {
+			.name	= "REGU_VIOHI",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VIOHI,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VIOHI_EN,
+	},
+	[MC13783_REGU_VIOLO] = {
+		.desc = {
+			.name	= "REGU_VIOLO",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VIOLO,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VIOLO_EN,
+	},
+	[MC13783_REGU_VDIG] = {
+		.desc = {
+			.name	= "REGU_VDIG",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VDIG,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VDIG_EN,
+	},
+	[MC13783_REGU_VGEN] = {
+		.desc = {
+			.name	= "REGU_VGEN",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VGEN,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VGEN_EN,
+	},
+	[MC13783_REGU_VRFDIG] = {
+		.desc = {
+			.name	= "REGU_VRFDIG",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFDIG,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VRFDIG_EN,
+	},
+	[MC13783_REGU_VRFREF] = {
+		.desc = {
+			.name	= "REGU_VRFREF",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFREF,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VRFREF_EN,
+	},
+	[MC13783_REGU_VRFCP] = {
+		.desc = {
+			.name	= "REGU_VRFCP",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFCP,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VRFCP_EN,
+	},
+	[MC13783_REGU_VSIM] = {
+		.desc = {
+			.name	= "REGU_VSIM",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VSIM,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VSIM_EN,
+	},
+	[MC13783_REGU_VESIM] = {
+		.desc = {
+			.name	= "REGU_VESIM",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VESIM,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VESIM_EN,
+	},
+	[MC13783_REGU_VCAM] = {
+		.desc = {
+			.name	= "REGU_VCAM",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VCAM,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VCAM_EN,
+	},
+	[MC13783_REGU_VRFBG] = {
+		.desc = {
+			.name	= "REGU_VRFBG",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFBG,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VRFBG_EN,
+	},
+	[MC13783_REGU_VVIB] = {
+		.desc = {
+			.name	= "REGU_VVIB",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VVIB,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VVIB_EN,
+	},
+	[MC13783_REGU_VRF1] = {
+		.desc = {
+			.name	= "REGU_VRF1",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRF1,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VRF1_EN,
+	},
+	[MC13783_REGU_VRF2] = {
+		.desc = {
+			.name	= "REGU_VRF2",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRF2,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VRF2_EN,
+	},
+	[MC13783_REGU_VMMC1] = {
+		.desc = {
+			.name	= "REGU_VMMC1",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VMMC1,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VMMC1_EN,
+	},
+	[MC13783_REGU_VMMC2] = {
+		.desc = {
+			.name	= "REGU_VMMC2",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VMMC2,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VMMC2_EN,
+	},
+	[MC13783_REGU_GPO1] = {
+		.desc = {
+			.name	= "REGU_GPO1",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO1,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO1_EN,
+	},
+	[MC13783_REGU_GPO2] = {
+		.desc = {
+			.name	= "REGU_GPO2",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO2,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO2_EN,
+	},
+	[MC13783_REGU_GPO3] = {
+		.desc = {
+			.name	= "REGU_GPO3",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO3,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO3_EN,
+	},
+	[MC13783_REGU_GPO4] = {
+		.desc = {
+			.name	= "REGU_GPO4",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO4,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO4_EN,
+	},
+};
+
+struct mc13783_priv {
+	struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)];
+	struct mc13783 *mc13783;
+	struct regulator_dev *regulators[0];
+};
+
+static int mc13783_enable(struct regulator_dev *rdev)
+{
+	struct mc13783_priv *priv = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
+
+	return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg,
+			mc13783_regulators[id].enable_bit,
+			mc13783_regulators[id].enable_bit);
+}
+
+static int mc13783_disable(struct regulator_dev *rdev)
+{
+	struct mc13783_priv *priv = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
+
+	return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg,
+			mc13783_regulators[id].enable_bit, 0);
+}
+
+static int mc13783_is_enabled(struct regulator_dev *rdev)
+{
+	struct mc13783_priv *priv = rdev_get_drvdata(rdev);
+	int ret, id = rdev_get_id(rdev);
+	unsigned int val;
+
+	ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val);
+	if (ret)
+		return ret;
+
+	return (val & mc13783_regulators[id].enable_bit) != 0;
+}
+
+static struct regulator_ops mc13783_regulator_ops = {
+	.enable		= mc13783_enable,
+	.disable	= mc13783_disable,
+	.is_enabled	= mc13783_is_enabled,
+};
+
+static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
+{
+	struct mc13783_priv *priv;
+	struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent);
+	struct mc13783_regulator_init_data *init_data;
+	int i, ret;
+
+	dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id);
+
+	priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *),
+			GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mc13783 = mc13783;
+
+	for (i = 0; i < mc13783->num_regulators; i++) {
+		init_data = &mc13783->regulators[i];
+		priv->regulators[i] = regulator_register(
+				&mc13783_regulators[init_data->id].desc,
+				&pdev->dev, init_data->init_data, priv);
+
+		if (IS_ERR(priv->regulators[i])) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				mc13783_regulators[i].desc.name);
+			ret = PTR_ERR(priv->regulators[i]);
+			goto err;
+		}
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+err:
+	while (--i >= 0)
+		regulator_unregister(priv->regulators[i]);
+
+	kfree(priv);
+
+	return ret;
+}
+
+static int __devexit mc13783_regulator_remove(struct platform_device *pdev)
+{
+	struct mc13783_priv *priv = platform_get_drvdata(pdev);
+	struct mc13783 *mc13783 = priv->mc13783;
+	int i;
+
+	for (i = 0; i < mc13783->num_regulators; i++)
+		regulator_unregister(priv->regulators[i]);
+
+	return 0;
+}
+
+static struct platform_driver mc13783_regulator_driver = {
+	.driver	= {
+		.name	= "mc13783-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __devexit_p(mc13783_regulator_remove),
+};
+
+static int __init mc13783_regulator_init(void)
+{
+	return platform_driver_probe(&mc13783_regulator_driver,
+			mc13783_regulator_probe);
+}
+subsys_initcall(mc13783_regulator_init);
+
+static void __exit mc13783_regulator_exit(void)
+{
+	platform_driver_unregister(&mc13783_regulator_driver);
+}
+module_exit(mc13783_regulator_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de");
+MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC");
+MODULE_ALIAS("platform:mc13783-regulator");
diff --git a/drivers/regulator/pcap-regulator.c b/drivers/regulator/pcap-regulator.c
new file mode 100644
index 000000000000..33d7d899e030
--- /dev/null
+++ b/drivers/regulator/pcap-regulator.c
@@ -0,0 +1,318 @@
+/*
+ * PCAP2 Regulator Driver
+ *
+ * Copyright (c) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/ezx-pcap.h>
+
+static const u16 V1_table[] = {
+	2775, 1275, 1600, 1725, 1825, 1925, 2075, 2275,
+};
+
+static const u16 V2_table[] = {
+	2500, 2775,
+};
+
+static const u16 V3_table[] = {
+	1075, 1275, 1550, 1725, 1876, 1950, 2075, 2275,
+};
+
+static const u16 V4_table[] = {
+	1275, 1550, 1725, 1875, 1950, 2075, 2275, 2775,
+};
+
+static const u16 V5_table[] = {
+	1875, 2275, 2475, 2775,
+};
+
+static const u16 V6_table[] = {
+	2475, 2775,
+};
+
+static const u16 V7_table[] = {
+	1875, 2775,
+};
+
+#define V8_table V4_table
+
+static const u16 V9_table[] = {
+	1575, 1875, 2475, 2775,
+};
+
+static const u16 V10_table[] = {
+	5000,
+};
+
+static const u16 VAUX1_table[] = {
+	1875, 2475, 2775, 3000,
+};
+
+#define VAUX2_table VAUX1_table
+
+static const u16 VAUX3_table[] = {
+	1200, 1200, 1200, 1200, 1400, 1600, 1800, 2000,
+	2200, 2400, 2600, 2800, 3000, 3200, 3400, 3600,
+};
+
+static const u16 VAUX4_table[] = {
+	1800, 1800, 3000, 5000,
+};
+
+static const u16 VSIM_table[] = {
+	1875, 3000,
+};
+
+static const u16 VSIM2_table[] = {
+	1875,
+};
+
+static const u16 VVIB_table[] = {
+	1300, 1800, 2000, 3000,
+};
+
+static const u16 SW1_table[] = {
+	900, 950, 1000, 1050, 1100, 1150, 1200, 1250,
+	1300, 1350, 1400, 1450, 1500, 1600, 1875, 2250,
+};
+
+#define SW2_table SW1_table
+
+static const u16 SW3_table[] = {
+	4000, 4500, 5000, 5500,
+};
+
+struct pcap_regulator {
+	const u8 reg;
+	const u8 en;
+	const u8 index;
+	const u8 stby;
+	const u8 lowpwr;
+	const u8 n_voltages;
+	const u16 *voltage_table;
+};
+
+#define NA 0xff
+
+#define VREG_INFO(_vreg, _reg, _en, _index, _stby, _lowpwr)		\
+	[_vreg]	= {							\
+		.reg		= _reg,					\
+		.en		= _en,					\
+		.index		= _index,				\
+		.stby		= _stby,				\
+		.lowpwr		= _lowpwr,				\
+		.n_voltages	= ARRAY_SIZE(_vreg##_table),		\
+		.voltage_table	= _vreg##_table,			\
+	}
+
+static struct pcap_regulator vreg_table[] = {
+	VREG_INFO(V1,    PCAP_REG_VREG1,   1,  2,  18, 0),
+	VREG_INFO(V2,    PCAP_REG_VREG1,   5,  6,  19, 22),
+	VREG_INFO(V3,    PCAP_REG_VREG1,   7,  8,  20, 23),
+	VREG_INFO(V4,    PCAP_REG_VREG1,   11, 12, 21, 24),
+	/* V5 STBY and LOWPWR are on PCAP_REG_VREG2 */
+	VREG_INFO(V5,    PCAP_REG_VREG1,   15, 16, 12, 19),
+
+	VREG_INFO(V6,    PCAP_REG_VREG2,   1,  2,  14, 20),
+	VREG_INFO(V7,    PCAP_REG_VREG2,   3,  4,  15, 21),
+	VREG_INFO(V8,    PCAP_REG_VREG2,   5,  6,  16, 22),
+	VREG_INFO(V9,    PCAP_REG_VREG2,   9,  10, 17, 23),
+	VREG_INFO(V10,   PCAP_REG_VREG2,   10, NA, 18, 24),
+
+	VREG_INFO(VAUX1, PCAP_REG_AUXVREG, 1,  2,  22, 23),
+	/* VAUX2 ... VSIM2 STBY and LOWPWR are on PCAP_REG_LOWPWR */
+	VREG_INFO(VAUX2, PCAP_REG_AUXVREG, 4,  5,  0,  1),
+	VREG_INFO(VAUX3, PCAP_REG_AUXVREG, 7,  8,  2,  3),
+	VREG_INFO(VAUX4, PCAP_REG_AUXVREG, 12, 13, 4,  5),
+	VREG_INFO(VSIM,  PCAP_REG_AUXVREG, 17, 18, NA, 6),
+	VREG_INFO(VSIM2, PCAP_REG_AUXVREG, 16, NA, NA, 7),
+	VREG_INFO(VVIB,  PCAP_REG_AUXVREG, 19, 20, NA, NA),
+
+	VREG_INFO(SW1,   PCAP_REG_SWCTRL,  1,  2,  NA, NA),
+	VREG_INFO(SW2,   PCAP_REG_SWCTRL,  6,  7,  NA, NA),
+	/* SW3 STBY is on PCAP_REG_AUXVREG */
+	VREG_INFO(SW3,   PCAP_REG_SWCTRL,  11, 12, 24, NA),
+
+	/* SWxS used to control SWx voltage on standby */
+/*	VREG_INFO(SW1S,  PCAP_REG_LOWPWR,  NA, 12, NA, NA),
+	VREG_INFO(SW2S,  PCAP_REG_LOWPWR,  NA, 20, NA, NA), */
+};
+
+static int pcap_regulator_set_voltage(struct regulator_dev *rdev,
+						int min_uV, int max_uV)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+	int uV;
+	u8 i;
+
+	/* the regulator doesn't support voltage switching */
+	if (vreg->n_voltages == 1)
+		return -EINVAL;
+
+	for (i = 0; i < vreg->n_voltages; i++) {
+		/* For V1 the first is not the best match */
+		if (i == 0 && rdev_get_id(rdev) == V1)
+			i = 1;
+		else if (i + 1 == vreg->n_voltages && rdev_get_id(rdev) == V1)
+			i = 0;
+
+		uV = vreg->voltage_table[i] * 1000;
+		if (min_uV <= uV && uV <= max_uV)
+			return ezx_pcap_set_bits(pcap, vreg->reg,
+					(vreg->n_voltages - 1) << vreg->index,
+					i << vreg->index);
+
+		if (i == 0 && rdev_get_id(rdev) == V1)
+			i = vreg->n_voltages - 1;
+	}
+
+	/* the requested voltage range is not supported by this regulator */
+	return -EINVAL;
+}
+
+static int pcap_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+	u32 tmp;
+	int mV;
+
+	if (vreg->n_voltages == 1)
+		return vreg->voltage_table[0] * 1000;
+
+	ezx_pcap_read(pcap, vreg->reg, &tmp);
+	tmp = ((tmp >> vreg->index) & (vreg->n_voltages - 1));
+	mV = vreg->voltage_table[tmp];
+
+	return mV * 1000;
+}
+
+static int pcap_regulator_enable(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+
+	if (vreg->en == NA)
+		return -EINVAL;
+
+	return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 1 << vreg->en);
+}
+
+static int pcap_regulator_disable(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+
+	if (vreg->en == NA)
+		return -EINVAL;
+
+	return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 0);
+}
+
+static int pcap_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+	u32 tmp;
+
+	if (vreg->en == NA)
+		return -EINVAL;
+
+	ezx_pcap_read(pcap, vreg->reg, &tmp);
+	return (tmp >> vreg->en) & 1;
+}
+
+static int pcap_regulator_list_voltage(struct regulator_dev *rdev,
+							unsigned int index)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+
+	return vreg->voltage_table[index] * 1000;
+}
+
+static struct regulator_ops pcap_regulator_ops = {
+	.list_voltage	= pcap_regulator_list_voltage,
+	.set_voltage	= pcap_regulator_set_voltage,
+	.get_voltage	= pcap_regulator_get_voltage,
+	.enable		= pcap_regulator_enable,
+	.disable	= pcap_regulator_disable,
+	.is_enabled	= pcap_regulator_is_enabled,
+};
+
+#define VREG(_vreg)						\
+	[_vreg]	= {						\
+		.name		= #_vreg,			\
+		.id		= _vreg,			\
+		.n_voltages	= ARRAY_SIZE(_vreg##_table),	\
+		.ops		= &pcap_regulator_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+	}
+
+static struct regulator_desc pcap_regulators[] = {
+	VREG(V1), VREG(V2), VREG(V3), VREG(V4), VREG(V5), VREG(V6), VREG(V7),
+	VREG(V8), VREG(V9), VREG(V10), VREG(VAUX1), VREG(VAUX2), VREG(VAUX3),
+	VREG(VAUX4), VREG(VSIM), VREG(VSIM2), VREG(VVIB), VREG(SW1), VREG(SW2),
+};
+
+static int __devinit pcap_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev;
+	void *pcap = dev_get_drvdata(pdev->dev.parent);
+
+	rdev = regulator_register(&pcap_regulators[pdev->id], &pdev->dev,
+				pdev->dev.platform_data, pcap);
+	if (IS_ERR(rdev))
+		return PTR_ERR(rdev);
+
+	platform_set_drvdata(pdev, rdev);
+
+	return 0;
+}
+
+static int __devexit pcap_regulator_remove(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+	regulator_unregister(rdev);
+
+	return 0;
+}
+
+static struct platform_driver pcap_regulator_driver = {
+	.driver = {
+		.name = "pcap-regulator",
+	},
+	.probe = pcap_regulator_probe,
+	.remove = __devexit_p(pcap_regulator_remove),
+};
+
+static int __init pcap_regulator_init(void)
+{
+	return platform_driver_register(&pcap_regulator_driver);
+}
+
+static void __exit pcap_regulator_exit(void)
+{
+	platform_driver_unregister(&pcap_regulator_driver);
+}
+
+subsys_initcall(pcap_regulator_init);
+module_exit(pcap_regulator_exit);
+
+MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>");
+MODULE_DESCRIPTION("PCAP2 Regulator Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
new file mode 100644
index 000000000000..2eefc1a0cf08
--- /dev/null
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -0,0 +1,862 @@
+/*
+ * wm831x-dcdc.c  --  DC-DC buck convertor driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_BUCKV_MAX_SELECTOR 0x68
+#define WM831X_BUCKP_MAX_SELECTOR 0x66
+
+#define WM831X_DCDC_MODE_FAST    0
+#define WM831X_DCDC_MODE_NORMAL  1
+#define WM831X_DCDC_MODE_IDLE    2
+#define WM831X_DCDC_MODE_STANDBY 3
+
+#define WM831X_DCDC_MAX_NAME 6
+
+/* Register offsets in control block */
+#define WM831X_DCDC_CONTROL_1     0
+#define WM831X_DCDC_CONTROL_2     1
+#define WM831X_DCDC_ON_CONFIG     2
+#define WM831X_DCDC_SLEEP_CONTROL 3
+
+/*
+ * Shared
+ */
+
+struct wm831x_dcdc {
+	char name[WM831X_DCDC_MAX_NAME];
+	struct regulator_desc desc;
+	int base;
+	struct wm831x *wm831x;
+	struct regulator_dev *regulator;
+};
+
+static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int reg;
+
+	reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE);
+	if (reg < 0)
+		return reg;
+
+	if (reg & mask)
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_dcdc_enable(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask);
+}
+
+static int wm831x_dcdc_disable(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0);
+}
+
+static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev)
+
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT;
+
+	switch (val) {
+	case WM831X_DCDC_MODE_FAST:
+		return REGULATOR_MODE_FAST;
+	case WM831X_DCDC_MODE_NORMAL:
+		return REGULATOR_MODE_NORMAL;
+	case WM831X_DCDC_MODE_STANDBY:
+		return REGULATOR_MODE_STANDBY;
+	case WM831X_DCDC_MODE_IDLE:
+		return REGULATOR_MODE_IDLE;
+	default:
+		BUG();
+	}
+}
+
+static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg,
+				    unsigned int mode)
+{
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = WM831X_DCDC_MODE_FAST;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = WM831X_DCDC_MODE_NORMAL;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = WM831X_DCDC_MODE_STANDBY;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = WM831X_DCDC_MODE_IDLE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK,
+			       val << WM831X_DC1_ON_MODE_SHIFT);
+}
+
+static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+	return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+	return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int ret;
+
+	/* First, check for errors */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & (1 << rdev_get_id(rdev))) {
+		dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+			rdev_get_id(rdev) + 1);
+		return REGULATOR_STATUS_ERROR;
+	}
+
+	/* DCDC1 and DCDC2 can additionally detect high voltage/current */
+	if (rdev_get_id(rdev) < 2) {
+		if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) {
+			dev_dbg(wm831x->dev, "DCDC%d over voltage\n",
+				rdev_get_id(rdev) + 1);
+			return REGULATOR_STATUS_ERROR;
+		}
+
+		if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) {
+			dev_dbg(wm831x->dev, "DCDC%d over current\n",
+				rdev_get_id(rdev) + 1);
+			return REGULATOR_STATUS_ERROR;
+		}
+	}
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+	if (ret < 0)
+		return ret;
+	if (!(ret & (1 << rdev_get_id(rdev))))
+		return REGULATOR_STATUS_OFF;
+
+	/* TODO: When we handle hardware control modes so we can report the
+	 * current mode. */
+	return REGULATOR_STATUS_ON;
+}
+
+static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data)
+{
+	struct wm831x_dcdc *dcdc = data;
+
+	regulator_notifier_call_chain(dcdc->regulator,
+				      REGULATOR_EVENT_UNDER_VOLTAGE,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
+{
+	struct wm831x_dcdc *dcdc = data;
+
+	regulator_notifier_call_chain(dcdc->regulator,
+				      REGULATOR_EVENT_OVER_CURRENT,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * BUCKV specifics
+ */
+
+static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
+				      unsigned selector)
+{
+	if (selector <= 0x8)
+		return 600000;
+	if (selector <= WM831X_BUCKV_MAX_SELECTOR)
+		return 600000 + ((selector - 0x8) * 12500);
+	return -EINVAL;
+}
+
+static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
+					 int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 vsel;
+
+	if (min_uV < 600000)
+		vsel = 0;
+	else if (min_uV <= 1800000)
+		vsel = ((min_uV - 600000) / 12500) + 8;
+	else
+		return -EINVAL;
+
+	if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+	return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+	return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);
+}
+
+/* Current limit options */
+static u16 wm831x_dcdc_ilim[] = {
+	125, 250, 375, 500, 625, 750, 875, 1000
+};
+
+static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
+					   int min_uA, int max_uA)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) {
+		if (max_uA <= wm831x_dcdc_ilim[i])
+			break;
+	}
+	if (i == ARRAY_SIZE(wm831x_dcdc_ilim))
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i);
+}
+
+static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK];
+}
+
+static struct regulator_ops wm831x_buckv_ops = {
+	.set_voltage = wm831x_buckv_set_voltage,
+	.get_voltage = wm831x_buckv_get_voltage,
+	.list_voltage = wm831x_buckv_list_voltage,
+	.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
+	.set_current_limit = wm831x_buckv_set_current_limit,
+	.get_current_limit = wm831x_buckv_get_current_limit,
+
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+	.get_status = wm831x_dcdc_get_status,
+	.get_mode = wm831x_dcdc_get_mode,
+	.set_mode = wm831x_dcdc_set_mode,
+	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+	struct wm831x_dcdc *dcdc;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+	if (pdata == NULL || pdata->dcdc[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	dcdc->base = res->start;
+
+	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
+	dcdc->desc.ops = &wm831x_buckv_ops;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->dcdc[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	irq = platform_get_irq_byname(pdev, "HC");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
+			irq, ret);
+		goto err_uv;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err_uv:
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+err_regulator:
+	regulator_unregister(dcdc->regulator);
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_buckv_driver = {
+	.probe = wm831x_buckv_probe,
+	.remove = __devexit_p(wm831x_buckv_remove),
+	.driver		= {
+		.name	= "wm831x-buckv",
+	},
+};
+
+/*
+ * BUCKP specifics
+ */
+
+static int wm831x_buckp_list_voltage(struct regulator_dev *rdev,
+				      unsigned selector)
+{
+	if (selector <= WM831X_BUCKP_MAX_SELECTOR)
+		return 850000 + (selector * 25000);
+	else
+		return -EINVAL;
+}
+
+static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg,
+					int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 vsel;
+
+	if (min_uV <= 34000000)
+		vsel = (min_uV - 850000) / 25000;
+	else
+		return -EINVAL;
+
+	if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckp_set_voltage(struct regulator_dev *rdev,
+				    int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+	return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
+					    int uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+	return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK);
+}
+
+static struct regulator_ops wm831x_buckp_ops = {
+	.set_voltage = wm831x_buckp_set_voltage,
+	.get_voltage = wm831x_buckp_get_voltage,
+	.list_voltage = wm831x_buckp_list_voltage,
+	.set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
+
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+	.get_status = wm831x_dcdc_get_status,
+	.get_mode = wm831x_dcdc_get_mode,
+	.set_mode = wm831x_dcdc_set_mode,
+	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+	struct wm831x_dcdc *dcdc;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+	if (pdata == NULL || pdata->dcdc[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	dcdc->base = res->start;
+
+	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;
+	dcdc->desc.ops = &wm831x_buckp_ops;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->dcdc[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(dcdc->regulator);
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_buckp_driver = {
+	.probe = wm831x_buckp_probe,
+	.remove = __devexit_p(wm831x_buckp_remove),
+	.driver		= {
+		.name	= "wm831x-buckp",
+	},
+};
+
+/*
+ * DCDC boost convertors
+ */
+
+static int wm831x_boostp_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int ret;
+
+	/* First, check for errors */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & (1 << rdev_get_id(rdev))) {
+		dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+			rdev_get_id(rdev) + 1);
+		return REGULATOR_STATUS_ERROR;
+	}
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+	if (ret < 0)
+		return ret;
+	if (ret & (1 << rdev_get_id(rdev)))
+		return REGULATOR_STATUS_ON;
+	else
+		return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_boostp_ops = {
+	.get_status = wm831x_boostp_get_status,
+
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+};
+
+static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+	struct wm831x_dcdc *dcdc;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+	if (pdata == NULL || pdata->dcdc[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	dcdc->base = res->start;
+
+	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.ops = &wm831x_boostp_ops;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->dcdc[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(dcdc->regulator);
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_boostp_driver = {
+	.probe = wm831x_boostp_probe,
+	.remove = __devexit_p(wm831x_boostp_remove),
+	.driver		= {
+		.name	= "wm831x-boostp",
+	},
+};
+
+/*
+ * External Power Enable
+ *
+ * These aren't actually DCDCs but look like them in hardware so share
+ * code.
+ */
+
+#define WM831X_EPE_BASE 6
+
+static struct regulator_ops wm831x_epe_ops = {
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+	.get_status = wm831x_dcdc_get_status,
+};
+
+static __devinit int wm831x_epe_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->epe);
+	struct wm831x_dcdc *dcdc;
+	int ret;
+
+	dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
+
+	if (pdata == NULL || pdata->epe[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	/* For current parts this is correct; probably need to revisit
+	 * in future.
+	 */
+	snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
+	dcdc->desc.ops = &wm831x_epe_ops;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->epe[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_epe_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_epe_driver = {
+	.probe = wm831x_epe_probe,
+	.remove = __devexit_p(wm831x_epe_remove),
+	.driver		= {
+		.name	= "wm831x-epe",
+	},
+};
+
+static int __init wm831x_dcdc_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&wm831x_buckv_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x BUCKV driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_buckp_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_boostp_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x BOOST driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_epe_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x EPE driver: %d\n", ret);
+
+	return 0;
+}
+subsys_initcall(wm831x_dcdc_init);
+
+static void __exit wm831x_dcdc_exit(void)
+{
+	platform_driver_unregister(&wm831x_epe_driver);
+	platform_driver_unregister(&wm831x_boostp_driver);
+	platform_driver_unregister(&wm831x_buckp_driver);
+	platform_driver_unregister(&wm831x_buckv_driver);
+}
+module_exit(wm831x_dcdc_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-buckv");
+MODULE_ALIAS("platform:wm831x-buckp");
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
new file mode 100644
index 000000000000..1d8d9879d3a1
--- /dev/null
+++ b/drivers/regulator/wm831x-isink.c
@@ -0,0 +1,260 @@
+/*
+ * wm831x-isink.c  --  Current sink driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_ISINK_MAX_NAME 7
+
+struct wm831x_isink {
+	char name[WM831X_ISINK_MAX_NAME];
+	struct regulator_desc desc;
+	int reg;
+	struct wm831x *wm831x;
+	struct regulator_dev *regulator;
+};
+
+static int wm831x_isink_enable(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	/* We have a two stage enable: first start the ISINK... */
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA,
+			      WM831X_CS1_ENA);
+	if (ret != 0)
+		return ret;
+
+	/* ...then enable drive */
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE,
+			      WM831X_CS1_DRIVE);
+	if (ret != 0)
+		wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+
+	return ret;
+
+}
+
+static int wm831x_isink_disable(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+
+}
+
+static int wm831x_isink_is_enabled(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, isink->reg);
+	if (ret < 0)
+		return ret;
+
+	if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) ==
+	    (WM831X_CS1_ENA | WM831X_CS1_DRIVE))
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_isink_set_current(struct regulator_dev *rdev,
+				    int min_uA, int max_uA)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) {
+		int val = wm831x_isinkv_values[i];
+		if (min_uA >= val && val <= max_uA) {
+			ret = wm831x_set_bits(wm831x, isink->reg,
+					      WM831X_CS1_ISEL_MASK, i);
+			return ret;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int wm831x_isink_get_current(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, isink->reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_CS1_ISEL_MASK;
+	if (ret > WM831X_ISINK_MAX_ISEL)
+		ret = WM831X_ISINK_MAX_ISEL;
+
+	return wm831x_isinkv_values[ret];
+}
+
+static struct regulator_ops wm831x_isink_ops = {
+	.is_enabled = wm831x_isink_is_enabled,
+	.enable = wm831x_isink_enable,
+	.disable = wm831x_isink_disable,
+	.set_current_limit = wm831x_isink_set_current,
+	.get_current_limit = wm831x_isink_get_current,
+};
+
+static irqreturn_t wm831x_isink_irq(int irq, void *data)
+{
+	struct wm831x_isink *isink = data;
+
+	regulator_notifier_call_chain(isink->regulator,
+				      REGULATOR_EVENT_OVER_CURRENT,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+
+static __devinit int wm831x_isink_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	struct wm831x_isink *isink;
+	int id = pdev->id % ARRAY_SIZE(pdata->isink);
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1);
+
+	if (pdata == NULL || pdata->isink[id] == NULL)
+		return -ENODEV;
+
+	isink = kzalloc(sizeof(struct wm831x_isink), GFP_KERNEL);
+	if (isink == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	isink->reg = res->start;
+
+	/* For current parts this is correct; probably need to revisit
+	 * in future.
+	 */
+	snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1);
+	isink->desc.name = isink->name;
+	isink->desc.id = id;
+	isink->desc.ops = &wm831x_isink_ops;
+	isink->desc.type = REGULATOR_CURRENT;
+	isink->desc.owner = THIS_MODULE;
+
+	isink->regulator = regulator_register(&isink->desc, &pdev->dev,
+					     pdata->isink[id], isink);
+	if (IS_ERR(isink->regulator)) {
+		ret = PTR_ERR(isink->regulator);
+		dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq,
+				 IRQF_TRIGGER_RISING, isink->name,
+				 isink);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, isink);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(isink->regulator);
+err:
+	kfree(isink);
+	return ret;
+}
+
+static __devexit int wm831x_isink_remove(struct platform_device *pdev)
+{
+	struct wm831x_isink *isink = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = isink->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink);
+
+	regulator_unregister(isink->regulator);
+	kfree(isink);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_isink_driver = {
+	.probe = wm831x_isink_probe,
+	.remove = __devexit_p(wm831x_isink_remove),
+	.driver		= {
+		.name	= "wm831x-isink",
+	},
+};
+
+static int __init wm831x_isink_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&wm831x_isink_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x ISINK driver: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(wm831x_isink_init);
+
+static void __exit wm831x_isink_exit(void)
+{
+	platform_driver_unregister(&wm831x_isink_driver);
+}
+module_exit(wm831x_isink_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x current sink driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-isink");
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
new file mode 100644
index 000000000000..bb61aede4801
--- /dev/null
+++ b/drivers/regulator/wm831x-ldo.c
@@ -0,0 +1,852 @@
+/*
+ * wm831x-ldo.c  --  LDO driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_LDO_MAX_NAME 6
+
+#define WM831X_LDO_CONTROL       0
+#define WM831X_LDO_ON_CONTROL    1
+#define WM831X_LDO_SLEEP_CONTROL 2
+
+#define WM831X_ALIVE_LDO_ON_CONTROL    0
+#define WM831X_ALIVE_LDO_SLEEP_CONTROL 1
+
+struct wm831x_ldo {
+	char name[WM831X_LDO_MAX_NAME];
+	struct regulator_desc desc;
+	int base;
+	struct wm831x *wm831x;
+	struct regulator_dev *regulator;
+};
+
+/*
+ * Shared
+ */
+
+static int wm831x_ldo_is_enabled(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int reg;
+
+	reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE);
+	if (reg < 0)
+		return reg;
+
+	if (reg & mask)
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_ldo_enable(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask);
+}
+
+static int wm831x_ldo_disable(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0);
+}
+
+static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
+{
+	struct wm831x_ldo *ldo = data;
+
+	regulator_notifier_call_chain(ldo->regulator,
+				      REGULATOR_EVENT_UNDER_VOLTAGE,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * General purpose LDOs
+ */
+
+#define WM831X_GP_LDO_SELECTOR_LOW 0xe
+#define WM831X_GP_LDO_MAX_SELECTOR 0x1f
+
+static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
+				      unsigned int selector)
+{
+	/* 0.9-1.6V in 50mV steps */
+	if (selector <= WM831X_GP_LDO_SELECTOR_LOW)
+		return 900000 + (selector * 50000);
+	/* 1.7-3.3V in 50mV steps */
+	if (selector <= WM831X_GP_LDO_MAX_SELECTOR)
+		return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW)
+				  * 100000);
+	return -EINVAL;
+}
+
+static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+					 int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int vsel, ret;
+
+	if (min_uV < 900000)
+		vsel = 0;
+	else if (min_uV < 1700000)
+		vsel = ((min_uV - 900000) / 50000);
+	else
+		vsel = ((min_uV - 1700000) / 100000)
+			+ WM831X_GP_LDO_SELECTOR_LOW + 1;
+
+	ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
+	if (ret < 0)
+		return ret;
+	if (ret < min_uV || ret > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+	return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+	return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_LDO1_ON_VSEL_MASK;
+
+	return wm831x_gp_ldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	unsigned int ret;
+
+	ret = wm831x_reg_read(wm831x, on_reg);
+	if (ret < 0)
+		return 0;
+
+	if (!(ret & WM831X_LDO1_ON_MODE))
+		return REGULATOR_MODE_NORMAL;
+
+	ret = wm831x_reg_read(wm831x, ctrl_reg);
+	if (ret < 0)
+		return 0;
+
+	if (ret & WM831X_LDO1_LP_MODE)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_IDLE;
+}
+
+static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev,
+				  unsigned int mode)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO1_ON_MODE, 0);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case REGULATOR_MODE_IDLE:
+		ret = wm831x_set_bits(wm831x, ctrl_reg,
+				      WM831X_LDO1_LP_MODE,
+				      WM831X_LDO1_LP_MODE);
+		if (ret < 0)
+			return ret;
+
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO1_ON_MODE,
+				      WM831X_LDO1_ON_MODE);
+		if (ret < 0)
+			return ret;
+
+	case REGULATOR_MODE_STANDBY:
+		ret = wm831x_set_bits(wm831x, ctrl_reg,
+				      WM831X_LDO1_LP_MODE, 0);
+		if (ret < 0)
+			return ret;
+
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO1_ON_MODE,
+				      WM831X_LDO1_ON_MODE);
+		if (ret < 0)
+			return ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int ret;
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+	if (ret < 0)
+		return ret;
+	if (!(ret & mask))
+		return REGULATOR_STATUS_OFF;
+
+	/* Is it reporting under voltage? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+	if (ret & mask)
+		return REGULATOR_STATUS_ERROR;
+
+	ret = wm831x_gp_ldo_get_mode(rdev);
+	if (ret < 0)
+		return ret;
+	else
+		return regulator_mode_to_status(ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
+						   int input_uV,
+						   int output_uV, int load_uA)
+{
+	if (load_uA < 20000)
+		return REGULATOR_MODE_STANDBY;
+	if (load_uA < 50000)
+		return REGULATOR_MODE_IDLE;
+	return REGULATOR_MODE_NORMAL;
+}
+
+
+static struct regulator_ops wm831x_gp_ldo_ops = {
+	.list_voltage = wm831x_gp_ldo_list_voltage,
+	.get_voltage = wm831x_gp_ldo_get_voltage,
+	.set_voltage = wm831x_gp_ldo_set_voltage,
+	.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
+	.get_mode = wm831x_gp_ldo_get_mode,
+	.set_mode = wm831x_gp_ldo_set_mode,
+	.get_status = wm831x_gp_ldo_get_status,
+	.get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
+
+	.is_enabled = wm831x_ldo_is_enabled,
+	.enable = wm831x_ldo_enable,
+	.disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+	struct wm831x_ldo *ldo;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+	if (pdata == NULL || pdata->ldo[id] == NULL)
+		return -ENODEV;
+
+	ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+	if (ldo == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	ldo->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	ldo->base = res->start;
+
+	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+	ldo->desc.name = ldo->name;
+	ldo->desc.id = id;
+	ldo->desc.type = REGULATOR_VOLTAGE;
+	ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
+	ldo->desc.ops = &wm831x_gp_ldo_ops;
+	ldo->desc.owner = THIS_MODULE;
+
+	ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+					     pdata->ldo[id], ldo);
+	if (IS_ERR(ldo->regulator)) {
+		ret = PTR_ERR(ldo->regulator);
+		dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+				 IRQF_TRIGGER_RISING, ldo->name,
+				 ldo);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(ldo->regulator);
+err:
+	kfree(ldo);
+	return ret;
+}
+
+static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
+{
+	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = ldo->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+	regulator_unregister(ldo->regulator);
+	kfree(ldo);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_gp_ldo_driver = {
+	.probe = wm831x_gp_ldo_probe,
+	.remove = __devexit_p(wm831x_gp_ldo_remove),
+	.driver		= {
+		.name	= "wm831x-ldo",
+	},
+};
+
+/*
+ * Analogue LDOs
+ */
+
+
+#define WM831X_ALDO_SELECTOR_LOW 0xc
+#define WM831X_ALDO_MAX_SELECTOR 0x1f
+
+static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
+				      unsigned int selector)
+{
+	/* 1-1.6V in 50mV steps */
+	if (selector <= WM831X_ALDO_SELECTOR_LOW)
+		return 1000000 + (selector * 50000);
+	/* 1.7-3.5V in 50mV steps */
+	if (selector <= WM831X_ALDO_MAX_SELECTOR)
+		return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW)
+				  * 100000);
+	return -EINVAL;
+}
+
+static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+					 int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int vsel, ret;
+
+	if (min_uV < 1000000)
+		vsel = 0;
+	else if (min_uV < 1700000)
+		vsel = ((min_uV - 1000000) / 50000);
+	else
+		vsel = ((min_uV - 1700000) / 100000)
+			+ WM831X_ALDO_SELECTOR_LOW + 1;
+
+	ret = wm831x_aldo_list_voltage(rdev, vsel);
+	if (ret < 0)
+		return ret;
+	if (ret < min_uV || ret > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+	return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+	return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_LDO7_ON_VSEL_MASK;
+
+	return wm831x_aldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	unsigned int ret;
+
+	ret = wm831x_reg_read(wm831x, on_reg);
+	if (ret < 0)
+		return 0;
+
+	if (ret & WM831X_LDO7_ON_MODE)
+		return REGULATOR_MODE_IDLE;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int wm831x_aldo_set_mode(struct regulator_dev *rdev,
+				  unsigned int mode)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO7_ON_MODE, 0);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case REGULATOR_MODE_IDLE:
+		ret = wm831x_set_bits(wm831x, ctrl_reg,
+				      WM831X_LDO7_ON_MODE,
+				      WM831X_LDO7_ON_MODE);
+		if (ret < 0)
+			return ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm831x_aldo_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int ret;
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+	if (ret < 0)
+		return ret;
+	if (!(ret & mask))
+		return REGULATOR_STATUS_OFF;
+
+	/* Is it reporting under voltage? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+	if (ret & mask)
+		return REGULATOR_STATUS_ERROR;
+
+	ret = wm831x_aldo_get_mode(rdev);
+	if (ret < 0)
+		return ret;
+	else
+		return regulator_mode_to_status(ret);
+}
+
+static struct regulator_ops wm831x_aldo_ops = {
+	.list_voltage = wm831x_aldo_list_voltage,
+	.get_voltage = wm831x_aldo_get_voltage,
+	.set_voltage = wm831x_aldo_set_voltage,
+	.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
+	.get_mode = wm831x_aldo_get_mode,
+	.set_mode = wm831x_aldo_set_mode,
+	.get_status = wm831x_aldo_get_status,
+
+	.is_enabled = wm831x_ldo_is_enabled,
+	.enable = wm831x_ldo_enable,
+	.disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+	struct wm831x_ldo *ldo;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+	if (pdata == NULL || pdata->ldo[id] == NULL)
+		return -ENODEV;
+
+	ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+	if (ldo == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	ldo->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	ldo->base = res->start;
+
+	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+	ldo->desc.name = ldo->name;
+	ldo->desc.id = id;
+	ldo->desc.type = REGULATOR_VOLTAGE;
+	ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
+	ldo->desc.ops = &wm831x_aldo_ops;
+	ldo->desc.owner = THIS_MODULE;
+
+	ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+					     pdata->ldo[id], ldo);
+	if (IS_ERR(ldo->regulator)) {
+		ret = PTR_ERR(ldo->regulator);
+		dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+				 IRQF_TRIGGER_RISING, ldo->name,
+				 ldo);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(ldo->regulator);
+err:
+	kfree(ldo);
+	return ret;
+}
+
+static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
+{
+	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = ldo->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+	regulator_unregister(ldo->regulator);
+	kfree(ldo);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_aldo_driver = {
+	.probe = wm831x_aldo_probe,
+	.remove = __devexit_p(wm831x_aldo_remove),
+	.driver		= {
+		.name	= "wm831x-aldo",
+	},
+};
+
+/*
+ * Alive LDO
+ */
+
+#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
+
+static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev,
+				      unsigned int selector)
+{
+	/* 0.8-1.55V in 50mV steps */
+	if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR)
+		return 800000 + (selector * 50000);
+	return -EINVAL;
+}
+
+static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
+					    int reg,
+					    int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int vsel, ret;
+
+	vsel = (min_uV - 800000) / 50000;
+
+	ret = wm831x_alive_ldo_list_voltage(rdev, vsel);
+	if (ret < 0)
+		return ret;
+	if (ret < min_uV || ret > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+
+	return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
+
+	return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_LDO11_ON_VSEL_MASK;
+
+	return wm831x_alive_ldo_list_voltage(rdev, ret);
+}
+
+static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int ret;
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+	if (ret < 0)
+		return ret;
+	if (ret & mask)
+		return REGULATOR_STATUS_ON;
+	else
+		return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_alive_ldo_ops = {
+	.list_voltage = wm831x_alive_ldo_list_voltage,
+	.get_voltage = wm831x_alive_ldo_get_voltage,
+	.set_voltage = wm831x_alive_ldo_set_voltage,
+	.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
+	.get_status = wm831x_alive_ldo_get_status,
+
+	.is_enabled = wm831x_ldo_is_enabled,
+	.enable = wm831x_ldo_enable,
+	.disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+	struct wm831x_ldo *ldo;
+	struct resource *res;
+	int ret;
+
+	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+	if (pdata == NULL || pdata->ldo[id] == NULL)
+		return -ENODEV;
+
+	ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+	if (ldo == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	ldo->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	ldo->base = res->start;
+
+	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+	ldo->desc.name = ldo->name;
+	ldo->desc.id = id;
+	ldo->desc.type = REGULATOR_VOLTAGE;
+	ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1;
+	ldo->desc.ops = &wm831x_alive_ldo_ops;
+	ldo->desc.owner = THIS_MODULE;
+
+	ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+					     pdata->ldo[id], ldo);
+	if (IS_ERR(ldo->regulator)) {
+		ret = PTR_ERR(ldo->regulator);
+		dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+
+err:
+	kfree(ldo);
+	return ret;
+}
+
+static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev)
+{
+	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+
+	regulator_unregister(ldo->regulator);
+	kfree(ldo);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_alive_ldo_driver = {
+	.probe = wm831x_alive_ldo_probe,
+	.remove = __devexit_p(wm831x_alive_ldo_remove),
+	.driver		= {
+		.name	= "wm831x-alive-ldo",
+	},
+};
+
+static int __init wm831x_ldo_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&wm831x_gp_ldo_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x GP LDO driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_aldo_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x ALDO driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_alive_ldo_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x alive LDO driver: %d\n",
+		       ret);
+
+	return 0;
+}
+subsys_initcall(wm831x_ldo_init);
+
+static void __exit wm831x_ldo_exit(void)
+{
+	platform_driver_unregister(&wm831x_alive_ldo_driver);
+	platform_driver_unregister(&wm831x_aldo_driver);
+	platform_driver_unregister(&wm831x_gp_ldo_driver);
+}
+module_exit(wm831x_ldo_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x LDO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-ldo");
+MODULE_ALIAS("platform:wm831x-aldo");
+MODULE_ALIAS("platform:wm831x-aliveldo");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 81adbdbd5042..73771b09fbd3 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -518,6 +518,16 @@ config RTC_DRV_V3020
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-v3020.
 
+config RTC_DRV_WM831X
+	tristate "Wolfson Microelectronics WM831x RTC"
+	depends on MFD_WM831X
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  of the Wolfson Microelectronics WM831X series PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-wm831x".
+
 config RTC_DRV_WM8350
 	tristate "Wolfson Microelectronics WM8350 RTC"
 	depends on MFD_WM8350
@@ -535,6 +545,15 @@ config RTC_DRV_PCF50633
 	  If you say yes here you get support for the RTC subsystem of the
 	  NXP PCF50633 used in embedded systems.
 
+config RTC_DRV_AB3100
+	tristate "ST-Ericsson AB3100 RTC"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
+	  support. This chip contains a battery- and capacitor-backed RTC.
+
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_OMAP
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 3c0f2b2ac927..5e152ffe5058 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -17,6 +17,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
 
 # Keep the list ordered.
 
+obj-$(CONFIG_RTC_DRV_AB3100)	+= rtc-ab3100.o
 obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
 obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
 obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
@@ -74,6 +75,7 @@ obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl4030.o
 obj-$(CONFIG_RTC_DRV_TX4939)	+= rtc-tx4939.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_WM831X)	+= rtc-wm831x.o
 obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
 obj-$(CONFIG_RTC_DRV_PCF50633)	+= rtc-pcf50633.o
diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c
new file mode 100644
index 000000000000..4704aac2b5af
--- /dev/null
+++ b/drivers/rtc/rtc-ab3100.c
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * RTC clock driver for the AB3100 Analog Baseband Chip
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mfd/ab3100.h>
+
+/* Clock rate in Hz */
+#define AB3100_RTC_CLOCK_RATE	32768
+
+/*
+ * The AB3100 RTC registers. These are the same for
+ * AB3000 and AB3100.
+ * Control register:
+ * Bit 0: RTC Monitor cleared=0, active=1, if you set it
+ *        to 1 it remains active until RTC power is lost.
+ * Bit 1: 32 kHz Oscillator, 0 = on, 1 = bypass
+ * Bit 2: Alarm on, 0 = off, 1 = on
+ * Bit 3: 32 kHz buffer disabling, 0 = enabled, 1 = disabled
+ */
+#define AB3100_RTC		0x53
+/* default setting, buffer disabled, alarm on */
+#define RTC_SETTING		0x30
+/* Alarm when AL0-AL3 == TI0-TI3  */
+#define AB3100_AL0		0x56
+#define AB3100_AL1		0x57
+#define AB3100_AL2		0x58
+#define AB3100_AL3		0x59
+/* This 48-bit register that counts up at 32768 Hz */
+#define AB3100_TI0		0x5a
+#define AB3100_TI1		0x5b
+#define AB3100_TI2		0x5c
+#define AB3100_TI3		0x5d
+#define AB3100_TI4		0x5e
+#define AB3100_TI5		0x5f
+
+/*
+ * RTC clock functions and device struct declaration
+ */
+static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2,
+		     AB3100_TI3, AB3100_TI4, AB3100_TI5};
+	unsigned char buf[6];
+	u64 fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2;
+	int err = 0;
+	int i;
+
+	buf[0] = (fat_time) & 0xFF;
+	buf[1] = (fat_time >> 8) & 0xFF;
+	buf[2] = (fat_time >> 16) & 0xFF;
+	buf[3] = (fat_time >> 24) & 0xFF;
+	buf[4] = (fat_time >> 32) & 0xFF;
+	buf[5] = (fat_time >> 40) & 0xFF;
+
+	for (i = 0; i < 6; i++) {
+		err = ab3100_set_register_interruptible(ab3100_data,
+							regs[i], buf[i]);
+		if (err)
+			return err;
+	}
+
+	/* Set the flag to mark that the clock is now set */
+	return ab3100_mask_and_set_register_interruptible(ab3100_data,
+							  AB3100_RTC,
+							  0xFE, 0x01);
+
+}
+
+static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	unsigned long time;
+	u8 rtcval;
+	int err;
+
+	err = ab3100_get_register_interruptible(ab3100_data,
+						AB3100_RTC, &rtcval);
+	if (err)
+		return err;
+
+	if (!(rtcval & 0x01)) {
+		dev_info(dev, "clock not set (lost power)");
+		return -EINVAL;
+	} else {
+		u64 fat_time;
+		u8 buf[6];
+
+		/* Read out time registers */
+		err = ab3100_get_register_page_interruptible(ab3100_data,
+							     AB3100_TI0,
+							     buf, 6);
+		if (err != 0)
+			return err;
+
+		fat_time = ((u64) buf[5] << 40) | ((u64) buf[4] << 32) |
+			((u64) buf[3] << 24) | ((u64) buf[2] << 16) |
+			((u64) buf[1] << 8) | (u64) buf[0];
+		time = (unsigned long) (fat_time /
+					(u64) (AB3100_RTC_CLOCK_RATE * 2));
+	}
+
+	rtc_time_to_tm(time, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	unsigned long time;
+	u64 fat_time;
+	u8 buf[6];
+	u8 rtcval;
+	int err;
+
+	/* Figure out if alarm is enabled or not */
+	err = ab3100_get_register_interruptible(ab3100_data,
+						AB3100_RTC, &rtcval);
+	if (err)
+		return err;
+	if (rtcval & 0x04)
+		alarm->enabled = 1;
+	else
+		alarm->enabled = 0;
+	/* No idea how this could be represented */
+	alarm->pending = 0;
+	/* Read out alarm registers, only 4 bytes */
+	err = ab3100_get_register_page_interruptible(ab3100_data,
+						     AB3100_AL0, buf, 4);
+	if (err)
+		return err;
+	fat_time = ((u64) buf[3] << 40) | ((u64) buf[2] << 32) |
+		((u64) buf[1] << 24) | ((u64) buf[0] << 16);
+	time = (unsigned long) (fat_time / (u64) (AB3100_RTC_CLOCK_RATE * 2));
+
+	rtc_time_to_tm(time, &alarm->time);
+
+	return rtc_valid_tm(&alarm->time);
+}
+
+static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3};
+	unsigned char buf[4];
+	unsigned long secs;
+	u64 fat_time;
+	int err;
+	int i;
+
+	rtc_tm_to_time(&alarm->time, &secs);
+	fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2;
+	buf[0] = (fat_time >> 16) & 0xFF;
+	buf[1] = (fat_time >> 24) & 0xFF;
+	buf[2] = (fat_time >> 32) & 0xFF;
+	buf[3] = (fat_time >> 40) & 0xFF;
+
+	/* Set the alarm */
+	for (i = 0; i < 4; i++) {
+		err = ab3100_set_register_interruptible(ab3100_data,
+							regs[i], buf[i]);
+		if (err)
+			return err;
+	}
+	/* Then enable the alarm */
+	return ab3100_mask_and_set_register_interruptible(ab3100_data,
+							  AB3100_RTC, ~(1 << 2),
+							  alarm->enabled << 2);
+}
+
+static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+
+	/*
+	 * It's not possible to enable/disable the alarm IRQ for this RTC.
+	 * It does not actually trigger any IRQ: instead its only function is
+	 * to power up the system, if it wasn't on. This will manifest as
+	 * a "power up cause" in the AB3100 power driver (battery charging etc)
+	 * and need to be handled there instead.
+	 */
+	if (enabled)
+		return ab3100_mask_and_set_register_interruptible(ab3100_data,
+						    AB3100_RTC, ~(1 << 2),
+						    1 << 2);
+	else
+		return ab3100_mask_and_set_register_interruptible(ab3100_data,
+						    AB3100_RTC, ~(1 << 2),
+						    0);
+}
+
+static const struct rtc_class_ops ab3100_rtc_ops = {
+	.read_time	= ab3100_rtc_read_time,
+	.set_mmss	= ab3100_rtc_set_mmss,
+	.read_alarm	= ab3100_rtc_read_alarm,
+	.set_alarm	= ab3100_rtc_set_alarm,
+	.alarm_irq_enable = ab3100_rtc_irq_enable,
+};
+
+static int __init ab3100_rtc_probe(struct platform_device *pdev)
+{
+	int err;
+	u8 regval;
+	struct rtc_device *rtc;
+	struct ab3100 *ab3100_data = platform_get_drvdata(pdev);
+
+	/* The first RTC register needs special treatment */
+	err = ab3100_get_register_interruptible(ab3100_data,
+						AB3100_RTC, &regval);
+	if (err) {
+		dev_err(&pdev->dev, "unable to read RTC register\n");
+		return -ENODEV;
+	}
+
+	if ((regval & 0xFE) != RTC_SETTING) {
+		dev_warn(&pdev->dev, "not default value in RTC reg 0x%x\n",
+			 regval);
+	}
+
+	if ((regval & 1) == 0) {
+		/*
+		 * Set bit to detect power loss.
+		 * This bit remains until RTC power is lost.
+		 */
+		regval = 1 | RTC_SETTING;
+		err = ab3100_set_register_interruptible(ab3100_data,
+							AB3100_RTC, regval);
+		/* Ignore any error on this write */
+	}
+
+	rtc = rtc_device_register("ab3100-rtc", &pdev->dev, &ab3100_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		err = PTR_ERR(rtc);
+		return err;
+	}
+
+	return 0;
+}
+
+static int __exit ab3100_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+	rtc_device_unregister(rtc);
+	return 0;
+}
+
+static struct platform_driver ab3100_rtc_driver = {
+	.driver = {
+		.name = "ab3100-rtc",
+		.owner = THIS_MODULE,
+	},
+	.remove	 = __exit_p(ab3100_rtc_remove),
+};
+
+static int __init ab3100_rtc_init(void)
+{
+	return platform_driver_probe(&ab3100_rtc_driver,
+				     ab3100_rtc_probe);
+}
+
+static void __exit ab3100_rtc_exit(void)
+{
+	platform_driver_unregister(&ab3100_rtc_driver);
+}
+
+module_init(ab3100_rtc_init);
+module_exit(ab3100_rtc_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index 184556620778..d490628b64da 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -1,26 +1,25 @@
 /*
  * Dallas DS1302 RTC Support
  *
- *  Copyright (C) 2002  David McCullough
- *  Copyright (C) 2003 - 2007  Paul Mundt
+ *  Copyright (C) 2002 David McCullough
+ *  Copyright (C) 2003 - 2007 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
- * License version 2.  See the file "COPYING" in the main directory of
+ * License version 2. See the file "COPYING" in the main directory of
  * this archive for more details.
  */
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/time.h>
 #include <linux/rtc.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/bcd.h>
 #include <asm/rtc.h>
 
 #define DRV_NAME	"rtc-ds1302"
-#define DRV_VERSION	"0.1.0"
+#define DRV_VERSION	"0.1.1"
 
 #define	RTC_CMD_READ	0x81		/* Read command */
 #define	RTC_CMD_WRITE	0x80		/* Write command */
@@ -47,11 +46,6 @@
 #error "Add support for your platform"
 #endif
 
-struct ds1302_rtc {
-	struct rtc_device *rtc_dev;
-	spinlock_t lock;
-};
-
 static void ds1302_sendbits(unsigned int val)
 {
 	int i;
@@ -103,10 +97,6 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val)
 
 static int ds1302_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct ds1302_rtc *rtc = dev_get_drvdata(dev);
-
-	spin_lock_irq(&rtc->lock);
-
 	tm->tm_sec	= bcd2bin(ds1302_readbyte(RTC_ADDR_SEC));
 	tm->tm_min	= bcd2bin(ds1302_readbyte(RTC_ADDR_MIN));
 	tm->tm_hour	= bcd2bin(ds1302_readbyte(RTC_ADDR_HOUR));
@@ -118,26 +108,17 @@ static int ds1302_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	if (tm->tm_year < 70)
 		tm->tm_year += 100;
 
-	spin_unlock_irq(&rtc->lock);
-
 	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
 		"mday=%d, mon=%d, year=%d, wday=%d\n",
 		__func__,
 		tm->tm_sec, tm->tm_min, tm->tm_hour,
 		tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday);
 
-	if (rtc_valid_tm(tm) < 0)
-		dev_err(dev, "invalid date\n");
-
-	return 0;
+	return rtc_valid_tm(tm);
 }
 
 static int ds1302_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct ds1302_rtc *rtc = dev_get_drvdata(dev);
-
-	spin_lock_irq(&rtc->lock);
-
 	/* Stop RTC */
 	ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80);
 
@@ -152,8 +133,6 @@ static int ds1302_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	/* Start RTC */
 	ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) & ~0x80);
 
-	spin_unlock_irq(&rtc->lock);
-
 	return 0;
 }
 
@@ -170,9 +149,7 @@ static int ds1302_rtc_ioctl(struct device *dev, unsigned int cmd,
 		if (copy_from_user(&tcs_val, (int __user *)arg, sizeof(int)))
 			return -EFAULT;
 
-		spin_lock_irq(&rtc->lock);
 		ds1302_writebyte(RTC_ADDR_TCR, (0xa0 | tcs_val * 0xf));
-		spin_unlock_irq(&rtc->lock);
 		return 0;
 	}
 #endif
@@ -187,10 +164,9 @@ static struct rtc_class_ops ds1302_rtc_ops = {
 	.ioctl		= ds1302_rtc_ioctl,
 };
 
-static int __devinit ds1302_rtc_probe(struct platform_device *pdev)
+static int __init ds1302_rtc_probe(struct platform_device *pdev)
 {
-	struct ds1302_rtc *rtc;
-	int ret;
+	struct rtc_device *rtc;
 
 	/* Reset */
 	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
@@ -200,37 +176,23 @@ static int __devinit ds1302_rtc_probe(struct platform_device *pdev)
 	if (ds1302_readbyte(RTC_ADDR_RAM0) != 0x42)
 		return -ENODEV;
 
-	rtc = kzalloc(sizeof(struct ds1302_rtc), GFP_KERNEL);
-	if (unlikely(!rtc))
-		return -ENOMEM;
-
-	spin_lock_init(&rtc->lock);
-	rtc->rtc_dev = rtc_device_register("ds1302", &pdev->dev,
+	rtc = rtc_device_register("ds1302", &pdev->dev,
 					   &ds1302_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc->rtc_dev)) {
-		ret = PTR_ERR(rtc->rtc_dev);
-		goto out;
-	}
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
 
 	platform_set_drvdata(pdev, rtc);
 
 	return 0;
-out:
-	kfree(rtc);
-	return ret;
 }
 
 static int __devexit ds1302_rtc_remove(struct platform_device *pdev)
 {
-	struct ds1302_rtc *rtc = platform_get_drvdata(pdev);
-
-	if (likely(rtc->rtc_dev))
-		rtc_device_unregister(rtc->rtc_dev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
 
+	rtc_device_unregister(rtc);
 	platform_set_drvdata(pdev, NULL);
 
-	kfree(rtc);
-
 	return 0;
 }
 
@@ -239,13 +201,12 @@ static struct platform_driver ds1302_platform_driver = {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
 	},
-	.probe		= ds1302_rtc_probe,
-	.remove		= __devexit_p(ds1302_rtc_remove),
+	.remove		= __exit_p(ds1302_rtc_remove),
 };
 
 static int __init ds1302_rtc_init(void)
 {
-	return platform_driver_register(&ds1302_platform_driver);
+	return platform_driver_probe(&ds1302_platform_driver, ds1302_rtc_probe);
 }
 
 static void __exit ds1302_rtc_exit(void)
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index d7310adb7152..e6ed5404bca0 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -29,7 +29,7 @@
 #include <asm/rtc.h>
 
 #define DRV_NAME	"sh-rtc"
-#define DRV_VERSION	"0.2.2"
+#define DRV_VERSION	"0.2.3"
 
 #define RTC_REG(r)	((r) * rtc_reg_size)
 
@@ -215,7 +215,7 @@ static irqreturn_t sh_rtc_shared(int irq, void *dev_id)
 	return IRQ_RETVAL(ret);
 }
 
-static inline void sh_rtc_setpie(struct device *dev, unsigned int enable)
+static int sh_rtc_irq_set_state(struct device *dev, int enable)
 {
 	struct sh_rtc *rtc = dev_get_drvdata(dev);
 	unsigned int tmp;
@@ -225,17 +225,22 @@ static inline void sh_rtc_setpie(struct device *dev, unsigned int enable)
 	tmp = readb(rtc->regbase + RCR2);
 
 	if (enable) {
+		rtc->periodic_freq |= PF_KOU;
 		tmp &= ~RCR2_PEF;	/* Clear PES bit */
 		tmp |= (rtc->periodic_freq & ~PF_HP);	/* Set PES2-0 */
-	} else
+	} else {
+		rtc->periodic_freq &= ~PF_KOU;
 		tmp &= ~(RCR2_PESMASK | RCR2_PEF);
+	}
 
 	writeb(tmp, rtc->regbase + RCR2);
 
 	spin_unlock_irq(&rtc->lock);
+
+	return 0;
 }
 
-static inline int sh_rtc_setfreq(struct device *dev, unsigned int freq)
+static int sh_rtc_irq_set_freq(struct device *dev, int freq)
 {
 	struct sh_rtc *rtc = dev_get_drvdata(dev);
 	int tmp, ret = 0;
@@ -278,10 +283,8 @@ static inline int sh_rtc_setfreq(struct device *dev, unsigned int freq)
 		ret = -ENOTSUPP;
 	}
 
-	if (ret == 0) {
+	if (ret == 0)
 		rtc->periodic_freq |= tmp;
-		rtc->rtc_dev->irq_freq = freq;
-	}
 
 	spin_unlock_irq(&rtc->lock);
 	return ret;
@@ -346,10 +349,6 @@ static int sh_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 	unsigned int ret = 0;
 
 	switch (cmd) {
-	case RTC_PIE_OFF:
-	case RTC_PIE_ON:
-		sh_rtc_setpie(dev, cmd == RTC_PIE_ON);
-		break;
 	case RTC_AIE_OFF:
 	case RTC_AIE_ON:
 		sh_rtc_setaie(dev, cmd == RTC_AIE_ON);
@@ -362,13 +361,6 @@ static int sh_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		rtc->periodic_freq |= PF_OXS;
 		sh_rtc_setcie(dev, 1);
 		break;
-	case RTC_IRQP_READ:
-		ret = put_user(rtc->rtc_dev->irq_freq,
-			       (unsigned long __user *)arg);
-		break;
-	case RTC_IRQP_SET:
-		ret = sh_rtc_setfreq(dev, arg);
-		break;
 	default:
 		ret = -ENOIOCTLCMD;
 	}
@@ -602,28 +594,6 @@ static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	return 0;
 }
 
-static int sh_rtc_irq_set_state(struct device *dev, int enabled)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct sh_rtc *rtc = platform_get_drvdata(pdev);
-
-	if (enabled) {
-		rtc->periodic_freq |= PF_KOU;
-		return sh_rtc_ioctl(dev, RTC_PIE_ON, 0);
-	} else {
-		rtc->periodic_freq &= ~PF_KOU;
-		return sh_rtc_ioctl(dev, RTC_PIE_OFF, 0);
-	}
-}
-
-static int sh_rtc_irq_set_freq(struct device *dev, int freq)
-{
-	if (!is_power_of_2(freq))
-		return -EINVAL;
-
-	return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq);
-}
-
 static struct rtc_class_ops sh_rtc_ops = {
 	.ioctl		= sh_rtc_ioctl,
 	.read_time	= sh_rtc_read_time,
@@ -635,7 +605,7 @@ static struct rtc_class_ops sh_rtc_ops = {
 	.proc		= sh_rtc_proc,
 };
 
-static int __devinit sh_rtc_probe(struct platform_device *pdev)
+static int __init sh_rtc_probe(struct platform_device *pdev)
 {
 	struct sh_rtc *rtc;
 	struct resource *res;
@@ -702,13 +672,6 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 
 	clk_enable(rtc->clk);
 
-	rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
-					   &sh_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc->rtc_dev)) {
-		ret = PTR_ERR(rtc->rtc_dev);
-		goto err_unmap;
-	}
-
 	rtc->capabilities = RTC_DEF_CAPABILITIES;
 	if (pdev->dev.platform_data) {
 		struct sh_rtc_platform_info *pinfo = pdev->dev.platform_data;
@@ -720,10 +683,6 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		rtc->capabilities |= pinfo->capabilities;
 	}
 
-	rtc->rtc_dev->max_user_freq = 256;
-
-	platform_set_drvdata(pdev, rtc);
-
 	if (rtc->carry_irq <= 0) {
 		/* register shared periodic/carry/alarm irq */
 		ret = request_irq(rtc->periodic_irq, sh_rtc_shared,
@@ -767,13 +726,26 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		}
 	}
 
+	platform_set_drvdata(pdev, rtc);
+
 	/* everything disabled by default */
-	rtc->periodic_freq = 0;
-	rtc->rtc_dev->irq_freq = 0;
-	sh_rtc_setpie(&pdev->dev, 0);
+	sh_rtc_irq_set_freq(&pdev->dev, 0);
+	sh_rtc_irq_set_state(&pdev->dev, 0);
 	sh_rtc_setaie(&pdev->dev, 0);
 	sh_rtc_setcie(&pdev->dev, 0);
 
+	rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
+					   &sh_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		free_irq(rtc->periodic_irq, rtc);
+		free_irq(rtc->carry_irq, rtc);
+		free_irq(rtc->alarm_irq, rtc);
+		goto err_unmap;
+	}
+
+	rtc->rtc_dev->max_user_freq = 256;
+
 	/* reset rtc to epoch 0 if time is invalid */
 	if (rtc_read_time(rtc->rtc_dev, &r) < 0) {
 		rtc_time_to_tm(0, &r);
@@ -795,14 +767,13 @@ err_badres:
 	return ret;
 }
 
-static int __devexit sh_rtc_remove(struct platform_device *pdev)
+static int __exit sh_rtc_remove(struct platform_device *pdev)
 {
 	struct sh_rtc *rtc = platform_get_drvdata(pdev);
 
-	if (likely(rtc->rtc_dev))
-		rtc_device_unregister(rtc->rtc_dev);
+	rtc_device_unregister(rtc->rtc_dev);
+	sh_rtc_irq_set_state(&pdev->dev, 0);
 
-	sh_rtc_setpie(&pdev->dev, 0);
 	sh_rtc_setaie(&pdev->dev, 0);
 	sh_rtc_setcie(&pdev->dev, 0);
 
@@ -813,9 +784,8 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev)
 		free_irq(rtc->alarm_irq, rtc);
 	}
 
-	release_resource(rtc->res);
-
 	iounmap(rtc->regbase);
+	release_resource(rtc->res);
 
 	clk_disable(rtc->clk);
 	clk_put(rtc->clk);
@@ -867,13 +837,12 @@ static struct platform_driver sh_rtc_platform_driver = {
 		.owner	= THIS_MODULE,
 		.pm	= &sh_rtc_dev_pm_ops,
 	},
-	.probe		= sh_rtc_probe,
-	.remove		= __devexit_p(sh_rtc_remove),
+	.remove		= __exit_p(sh_rtc_remove),
 };
 
 static int __init sh_rtc_init(void)
 {
-	return platform_driver_register(&sh_rtc_platform_driver);
+	return platform_driver_probe(&sh_rtc_platform_driver, sh_rtc_probe);
 }
 
 static void __exit sh_rtc_exit(void)
diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c
new file mode 100644
index 000000000000..79795cdf6ed8
--- /dev/null
+++ b/drivers/rtc/rtc-wm831x.c
@@ -0,0 +1,523 @@
+/*
+ *	Real Time Clock driver for Wolfson Microelectronics WM831x
+ *
+ *	Copyright (C) 2009 Wolfson Microelectronics PLC.
+ *
+ *  Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+
+/*
+ * R16416 (0x4020) - RTC Write Counter
+ */
+#define WM831X_RTC_WR_CNT_MASK                  0xFFFF  /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_SHIFT                      0  /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_WIDTH                     16  /* RTC_WR_CNT - [15:0] */
+
+/*
+ * R16417 (0x4021) - RTC Time 1
+ */
+#define WM831X_RTC_TIME_MASK                    0xFFFF  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT                        0  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH                       16  /* RTC_TIME - [15:0] */
+
+/*
+ * R16418 (0x4022) - RTC Time 2
+ */
+#define WM831X_RTC_TIME_MASK                    0xFFFF  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT                        0  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH                       16  /* RTC_TIME - [15:0] */
+
+/*
+ * R16419 (0x4023) - RTC Alarm 1
+ */
+#define WM831X_RTC_ALM_MASK                     0xFFFF  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT                         0  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH                        16  /* RTC_ALM - [15:0] */
+
+/*
+ * R16420 (0x4024) - RTC Alarm 2
+ */
+#define WM831X_RTC_ALM_MASK                     0xFFFF  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT                         0  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH                        16  /* RTC_ALM - [15:0] */
+
+/*
+ * R16421 (0x4025) - RTC Control
+ */
+#define WM831X_RTC_VALID                        0x8000  /* RTC_VALID */
+#define WM831X_RTC_VALID_MASK                   0x8000  /* RTC_VALID */
+#define WM831X_RTC_VALID_SHIFT                      15  /* RTC_VALID */
+#define WM831X_RTC_VALID_WIDTH                       1  /* RTC_VALID */
+#define WM831X_RTC_SYNC_BUSY                    0x4000  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_MASK               0x4000  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_SHIFT                  14  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_WIDTH                   1  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_ALM_ENA                      0x0400  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_MASK                 0x0400  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_SHIFT                    10  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_WIDTH                     1  /* RTC_ALM_ENA */
+#define WM831X_RTC_PINT_FREQ_MASK               0x0070  /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_SHIFT                   4  /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_WIDTH                   3  /* RTC_PINT_FREQ - [6:4] */
+
+/*
+ * R16422 (0x4026) - RTC Trim
+ */
+#define WM831X_RTC_TRIM_MASK                    0x03FF  /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_SHIFT                        0  /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_WIDTH                       10  /* RTC_TRIM - [9:0] */
+
+#define WM831X_SET_TIME_RETRIES	5
+#define WM831X_GET_TIME_RETRIES	5
+
+struct wm831x_rtc {
+	struct wm831x *wm831x;
+	struct rtc_device *rtc;
+	unsigned int alarm_enabled:1;
+};
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	u16 time1[2], time2[2];
+	int ret;
+	int count = 0;
+
+	/* Has the RTC been programmed? */
+	ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read RTC control: %d\n", ret);
+		return ret;
+	}
+	if (!(ret & WM831X_RTC_VALID)) {
+		dev_dbg(dev, "RTC not yet configured\n");
+		return -EINVAL;
+	}
+
+	/* Read twice to make sure we don't read a corrupt, partially
+	 * incremented, value.
+	 */
+	do {
+		ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+				       2, time1);
+		if (ret != 0)
+			continue;
+
+		ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+				       2, time2);
+		if (ret != 0)
+			continue;
+
+		if (memcmp(time1, time2, sizeof(time1)) == 0) {
+			u32 time = (time1[0] << 16) | time1[1];
+
+			rtc_time_to_tm(time, tm);
+			return rtc_valid_tm(tm);
+		}
+
+	} while (++count < WM831X_GET_TIME_RETRIES);
+
+	dev_err(dev, "Timed out reading current time\n");
+
+	return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm831x_rtc_set_mmss(struct device *dev, unsigned long time)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	struct rtc_time new_tm;
+	unsigned long new_time;
+	int ret;
+	int count = 0;
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1,
+			       (time >> 16) & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write TIME_1: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write TIME_2: %d\n", ret);
+		return ret;
+	}
+
+	/* Wait for the update to complete - should happen first time
+	 * round but be conservative.
+	 */
+	do {
+		msleep(1);
+
+		ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+		if (ret < 0)
+			ret = WM831X_RTC_SYNC_BUSY;
+	} while (!(ret & WM831X_RTC_SYNC_BUSY) &&
+		 ++count < WM831X_SET_TIME_RETRIES);
+
+	if (ret & WM831X_RTC_SYNC_BUSY) {
+		dev_err(dev, "Timed out writing RTC update\n");
+		return -EIO;
+	}
+
+	/* Check that the update was accepted; security features may
+	 * have caused the update to be ignored.
+	 */
+	ret = wm831x_rtc_readtime(dev, &new_tm);
+	if (ret < 0)
+		return ret;
+
+	ret = rtc_tm_to_time(&new_tm, &new_time);
+	if (ret < 0) {
+		dev_err(dev, "Failed to convert time: %d\n", ret);
+		return ret;
+	}
+
+	/* Allow a second of change in case of tick */
+	if (new_time - time > 1) {
+		dev_err(dev, "RTC update not permitted by hardware\n");
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	int ret;
+	u16 data[2];
+	u32 time;
+
+	ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1,
+			       2, data);
+	if (ret != 0) {
+		dev_err(dev, "Failed to read alarm time: %d\n", ret);
+		return ret;
+	}
+
+	time = (data[0] << 16) | data[1];
+
+	rtc_time_to_tm(time, &alrm->time);
+
+	ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read RTC control: %d\n", ret);
+		return ret;
+	}
+
+	if (ret & WM831X_RTC_ALM_ENA)
+		alrm->enabled = 1;
+	else
+		alrm->enabled = 0;
+
+	return 0;
+}
+
+static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+	wm831x_rtc->alarm_enabled = 0;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_ALM_ENA, 0);
+}
+
+static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+	wm831x_rtc->alarm_enabled = 1;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA);
+}
+
+static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	int ret;
+	unsigned long time;
+
+	ret = rtc_tm_to_time(&alrm->time, &time);
+	if (ret < 0) {
+		dev_err(dev, "Failed to convert time: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_rtc_stop_alarm(wm831x_rtc);
+	if (ret < 0) {
+		dev_err(dev, "Failed to stop alarm: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1,
+			       (time >> 16) & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write ALARM_1: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write ALARM_2: %d\n", ret);
+		return ret;
+	}
+
+	if (alrm->enabled) {
+		ret = wm831x_rtc_start_alarm(wm831x_rtc);
+		if (ret < 0) {
+			dev_err(dev, "Failed to start alarm: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int wm831x_rtc_alarm_irq_enable(struct device *dev,
+				       unsigned int enabled)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+
+	if (enabled)
+		return wm831x_rtc_start_alarm(wm831x_rtc);
+	else
+		return wm831x_rtc_stop_alarm(wm831x_rtc);
+}
+
+static int wm831x_rtc_update_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	int val;
+
+	if (enabled)
+		val = 1 << WM831X_RTC_PINT_FREQ_SHIFT;
+	else
+		val = 0;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_PINT_FREQ_MASK, val);
+}
+
+static irqreturn_t wm831x_alm_irq(int irq, void *data)
+{
+	struct wm831x_rtc *wm831x_rtc = data;
+
+	rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_per_irq(int irq, void *data)
+{
+	struct wm831x_rtc *wm831x_rtc = data;
+
+	rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_UF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops wm831x_rtc_ops = {
+	.read_time = wm831x_rtc_readtime,
+	.set_mmss = wm831x_rtc_set_mmss,
+	.read_alarm = wm831x_rtc_readalarm,
+	.set_alarm = wm831x_rtc_setalarm,
+	.alarm_irq_enable = wm831x_rtc_alarm_irq_enable,
+	.update_irq_enable = wm831x_rtc_update_irq_enable,
+};
+
+#ifdef CONFIG_PM
+/* Turn off the alarm if it should not be a wake source. */
+static int wm831x_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret, enable;
+
+	if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev))
+		enable = WM831X_RTC_ALM_ENA;
+	else
+		enable = 0;
+
+	ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			      WM831X_RTC_ALM_ENA, enable);
+	if (ret != 0)
+		dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret);
+
+	return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int wm831x_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (wm831x_rtc->alarm_enabled) {
+		ret = wm831x_rtc_start_alarm(wm831x_rtc);
+		if (ret != 0)
+			dev_err(&pdev->dev,
+				"Failed to restart RTC alarm: %d\n", ret);
+	}
+
+	return 0;
+}
+
+/* Unconditionally disable the alarm */
+static int wm831x_rtc_freeze(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			      WM831X_RTC_ALM_ENA, 0);
+	if (ret != 0)
+		dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret);
+
+	return 0;
+}
+#else
+#define wm831x_rtc_suspend NULL
+#define wm831x_rtc_resume NULL
+#define wm831x_rtc_freeze NULL
+#endif
+
+static int wm831x_rtc_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_rtc *wm831x_rtc;
+	int per_irq = platform_get_irq_byname(pdev, "PER");
+	int alm_irq = platform_get_irq_byname(pdev, "ALM");
+	int ret = 0;
+
+	wm831x_rtc = kzalloc(sizeof(*wm831x_rtc), GFP_KERNEL);
+	if (wm831x_rtc == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wm831x_rtc);
+	wm831x_rtc->wm831x = wm831x;
+
+	ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret);
+		goto err;
+	}
+	if (ret & WM831X_RTC_ALM_ENA)
+		wm831x_rtc->alarm_enabled = 1;
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	wm831x_rtc->rtc = rtc_device_register("wm831x", &pdev->dev,
+					      &wm831x_rtc_ops, THIS_MODULE);
+	if (IS_ERR(wm831x_rtc->rtc)) {
+		ret = PTR_ERR(wm831x_rtc->rtc);
+		goto err;
+	}
+
+	ret = wm831x_request_irq(wm831x, per_irq, wm831x_per_irq,
+				 IRQF_TRIGGER_RISING, "wm831x_rtc_per",
+				 wm831x_rtc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request periodic IRQ %d: %d\n",
+			per_irq, ret);
+	}
+
+	ret = wm831x_request_irq(wm831x, alm_irq, wm831x_alm_irq,
+				 IRQF_TRIGGER_RISING, "wm831x_rtc_alm",
+				 wm831x_rtc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+			alm_irq, ret);
+	}
+
+	return 0;
+
+err:
+	kfree(wm831x_rtc);
+	return ret;
+}
+
+static int __devexit wm831x_rtc_remove(struct platform_device *pdev)
+{
+	struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev);
+	int per_irq = platform_get_irq_byname(pdev, "PER");
+	int alm_irq = platform_get_irq_byname(pdev, "ALM");
+
+	wm831x_free_irq(wm831x_rtc->wm831x, alm_irq, wm831x_rtc);
+	wm831x_free_irq(wm831x_rtc->wm831x, per_irq, wm831x_rtc);
+	rtc_device_unregister(wm831x_rtc->rtc);
+	kfree(wm831x_rtc);
+
+	return 0;
+}
+
+static struct dev_pm_ops wm831x_rtc_pm_ops = {
+	.suspend = wm831x_rtc_suspend,
+	.resume = wm831x_rtc_resume,
+
+	.freeze = wm831x_rtc_freeze,
+	.thaw = wm831x_rtc_resume,
+	.restore = wm831x_rtc_resume,
+
+	.poweroff = wm831x_rtc_suspend,
+};
+
+static struct platform_driver wm831x_rtc_driver = {
+	.probe = wm831x_rtc_probe,
+	.remove = __devexit_p(wm831x_rtc_remove),
+	.driver = {
+		.name = "wm831x-rtc",
+		.pm = &wm831x_rtc_pm_ops,
+	},
+};
+
+static int __init wm831x_rtc_init(void)
+{
+	return platform_driver_register(&wm831x_rtc_driver);
+}
+module_init(wm831x_rtc_init);
+
+static void __exit wm831x_rtc_exit(void)
+{
+	platform_driver_unregister(&wm831x_rtc_driver);
+}
+module_exit(wm831x_rtc_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-rtc");
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 6bab63cd5b29..e5c58fe7e745 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -930,7 +930,7 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
 
 	if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
 		printk(KERN_ERR
-			"PCI error address is 0x%lx, "
+			"PCI error address is 0x%llx, "
 				"master is serial port %c %s\n",
 		     (((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
 							 << 32)
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 79c9c5f5cdba..ed4648b556c7 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -868,11 +868,11 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA   ", "C336MX     ", 0x99bcafe9, 0xaa25bcab),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
 	PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
-	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
+	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
@@ -883,10 +883,10 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"),	/* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
-	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
-	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
 	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100  1.00.",0x19ca78af,0xf964f42b),
 	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 8e2feb563347..32dc2fc50e6b 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -272,7 +272,8 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 		__raw_writew(data, PSCR);
 	}
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780) || \
       defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SH7786) || \
@@ -662,10 +663,11 @@ static irqreturn_t sci_rx_interrupt(int irq, void *port)
 static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
 {
 	struct uart_port *port = ptr;
+	unsigned long flags;
 
-	spin_lock_irq(&port->lock);
+	spin_lock_irqsave(&port->lock, flags);
 	sci_transmit_chars(port);
-	spin_unlock_irq(&port->lock);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 38072c15b845..3e2fcf93b42e 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -112,6 +112,13 @@
 #elif defined(CONFIG_H8S2678)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+# define SCSPTR0 0xfe4b0020
+# define SCSPTR1 0xfe4b0020
+# define SCSPTR2 0xfe4b0020
+# define SCIF_ORER 0x0001
+# define SCSCR_INIT(port)	0x38
+# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
 # define SCSPTR1 0xffe08024 /* 16 bit SCIF */
@@ -562,6 +569,16 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xfe4b0000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0;
+	if (port->mapbase == 0xfe4c0000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0;
+	if (port->mapbase == 0xfe4d0000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 static inline int sci_rxd_in(struct uart_port *port)
 {
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 3dd231a643b5..559b5fe9dc0f 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -77,7 +77,7 @@ static unsigned long ack_handle[NR_IRQS];
 static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
 {
 	struct irq_chip *chip = get_irq_chip(irq);
-	return (void *)((char *)chip - offsetof(struct intc_desc_int, chip));
+	return container_of(chip, struct intc_desc_int, chip);
 }
 
 static inline unsigned int set_field(unsigned int value,
@@ -95,16 +95,19 @@ static inline unsigned int set_field(unsigned int value,
 static void write_8(unsigned long addr, unsigned long h, unsigned long data)
 {
 	__raw_writeb(set_field(0, data, h), addr);
+	(void)__raw_readb(addr);	/* Defeat write posting */
 }
 
 static void write_16(unsigned long addr, unsigned long h, unsigned long data)
 {
 	__raw_writew(set_field(0, data, h), addr);
+	(void)__raw_readw(addr);	/* Defeat write posting */
 }
 
 static void write_32(unsigned long addr, unsigned long h, unsigned long data)
 {
 	__raw_writel(set_field(0, data, h), addr);
+	(void)__raw_readl(addr);	/* Defeat write posting */
 }
 
 static void modify_8(unsigned long addr, unsigned long h, unsigned long data)
@@ -112,6 +115,7 @@ static void modify_8(unsigned long addr, unsigned long h, unsigned long data)
 	unsigned long flags;
 	local_irq_save(flags);
 	__raw_writeb(set_field(__raw_readb(addr), data, h), addr);
+	(void)__raw_readb(addr);	/* Defeat write posting */
 	local_irq_restore(flags);
 }
 
@@ -120,6 +124,7 @@ static void modify_16(unsigned long addr, unsigned long h, unsigned long data)
 	unsigned long flags;
 	local_irq_save(flags);
 	__raw_writew(set_field(__raw_readw(addr), data, h), addr);
+	(void)__raw_readw(addr);	/* Defeat write posting */
 	local_irq_restore(flags);
 }
 
@@ -128,6 +133,7 @@ static void modify_32(unsigned long addr, unsigned long h, unsigned long data)
 	unsigned long flags;
 	local_irq_save(flags);
 	__raw_writel(set_field(__raw_readl(addr), data, h), addr);
+	(void)__raw_readl(addr);	/* Defeat write posting */
 	local_irq_restore(flags);
 }
 
@@ -657,16 +663,9 @@ static unsigned int __init save_reg(struct intc_desc_int *d,
 	return 0;
 }
 
-static unsigned char *intc_evt2irq_table;
-
-unsigned int intc_evt2irq(unsigned int vector)
+static void intc_redirect_irq(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned int irq = evt2irq(vector);
-
-	if (intc_evt2irq_table && intc_evt2irq_table[irq])
-		irq = intc_evt2irq_table[irq];
-
-	return irq;
+	generic_handle_irq((unsigned int)get_irq_data(irq));
 }
 
 void __init register_intc_controller(struct intc_desc *desc)
@@ -739,50 +738,48 @@ void __init register_intc_controller(struct intc_desc *desc)
 
 	BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
 
-	/* keep the first vector only if same enum is used multiple times */
+	/* register the vectors one by one */
 	for (i = 0; i < desc->nr_vectors; i++) {
 		struct intc_vect *vect = desc->vectors + i;
-		int first_irq = evt2irq(vect->vect);
+		unsigned int irq = evt2irq(vect->vect);
+		struct irq_desc *irq_desc;
 
 		if (!vect->enum_id)
 			continue;
 
+		irq_desc = irq_to_desc_alloc_node(irq, numa_node_id());
+		if (unlikely(!irq_desc)) {
+			pr_info("can't get irq_desc for %d\n", irq);
+			continue;
+		}
+
+		intc_register_irq(desc, d, vect->enum_id, irq);
+
 		for (k = i + 1; k < desc->nr_vectors; k++) {
 			struct intc_vect *vect2 = desc->vectors + k;
+			unsigned int irq2 = evt2irq(vect2->vect);
 
 			if (vect->enum_id != vect2->enum_id)
 				continue;
 
-			vect2->enum_id = 0;
-
-			if (!intc_evt2irq_table)
-				intc_evt2irq_table = kzalloc(NR_IRQS, GFP_NOWAIT);
-
-			if (!intc_evt2irq_table) {
-				pr_warning("intc: cannot allocate evt2irq!\n");
+			/*
+			 * In the case of multi-evt handling and sparse
+			 * IRQ support, each vector still needs to have
+			 * its own backing irq_desc.
+			 */
+			irq_desc = irq_to_desc_alloc_node(irq2, numa_node_id());
+			if (unlikely(!irq_desc)) {
+				pr_info("can't get irq_desc for %d\n", irq2);
 				continue;
 			}
 
-			intc_evt2irq_table[evt2irq(vect2->vect)] = first_irq;
-		}
-	}
-
-	/* register the vectors one by one */
-	for (i = 0; i < desc->nr_vectors; i++) {
-		struct intc_vect *vect = desc->vectors + i;
-		unsigned int irq = evt2irq(vect->vect);
-		struct irq_desc *irq_desc;
-
-		if (!vect->enum_id)
-			continue;
+			vect2->enum_id = 0;
 
-		irq_desc = irq_to_desc_alloc_node(irq, numa_node_id());
-		if (unlikely(!irq_desc)) {
-			printk(KERN_INFO "can not get irq_desc for %d\n", irq);
-			continue;
+			/* redirect this interrupts to the first one */
+			set_irq_chip_and_handler_name(irq2, &d->chip,
+					intc_redirect_irq, "redirect");
+			set_irq_data(irq2, (void *)irq);
 		}
-
-		intc_register_irq(desc, d, vect->enum_id, irq);
 	}
 }
 
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index f853d5600ca7..9e50896233aa 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -600,6 +600,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 			ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
 				   "  revision %d detected. Will extract"
 				   " v1\n", out->revision);
+			out->revision = 1;
 			sprom_extract_r123(out, in);
 		}
 	}
diff --git a/drivers/ssb/sdio.c b/drivers/ssb/sdio.c
index 114051056b52..65a6080cb02a 100644
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -21,7 +21,7 @@
 #include "ssb_private.h"
 
 /* Define the following to 1 to enable a printk on each coreswitch. */
-#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG		1
+#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG		0
 
 
 /* Hardware invariants CIS tuples */
@@ -333,7 +333,7 @@ static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
 		goto out;
 
 err_out:
-	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
+	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
 		bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
 out:
 	sdio_release_host(bus->host_sdio);
@@ -440,7 +440,7 @@ static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
 		goto out;
 
 err_out:
-	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
+	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
 		bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
 out:
 	sdio_release_host(bus->host_sdio);
diff --git a/drivers/staging/octeon/cvmx-mdio.h b/drivers/staging/octeon/cvmx-mdio.h
index c987a75a20cf..f45dc49512f2 100644
--- a/drivers/staging/octeon/cvmx-mdio.h
+++ b/drivers/staging/octeon/cvmx-mdio.h
@@ -421,7 +421,7 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
 	do {
 		cvmx_wait(1000);
 		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
-	} while (smi_rd.s.pending && timeout--);
+	} while (smi_rd.s.pending && --timeout);
 
 	if (timeout <= 0) {
 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 3f06818cf9fa..02347c57357d 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -20,6 +20,7 @@
 #include <linux/bitops.h>
 #include <linux/interrupt.h>
 #include <linux/stringify.h>
+#include <linux/pm_runtime.h>
 
 #define DRIVER_NAME "uio_pdrv_genirq"
 
@@ -27,8 +28,27 @@ struct uio_pdrv_genirq_platdata {
 	struct uio_info *uioinfo;
 	spinlock_t lock;
 	unsigned long flags;
+	struct platform_device *pdev;
 };
 
+static int uio_pdrv_genirq_open(struct uio_info *info, struct inode *inode)
+{
+	struct uio_pdrv_genirq_platdata *priv = info->priv;
+
+	/* Wait until the Runtime PM code has woken up the device */
+	pm_runtime_get_sync(&priv->pdev->dev);
+	return 0;
+}
+
+static int uio_pdrv_genirq_release(struct uio_info *info, struct inode *inode)
+{
+	struct uio_pdrv_genirq_platdata *priv = info->priv;
+
+	/* Tell the Runtime PM code that the device has become idle */
+	pm_runtime_put_sync(&priv->pdev->dev);
+	return 0;
+}
+
 static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
 {
 	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
@@ -97,6 +117,7 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	priv->uioinfo = uioinfo;
 	spin_lock_init(&priv->lock);
 	priv->flags = 0; /* interrupt is enabled to begin with */
+	priv->pdev = pdev;
 
 	uiomem = &uioinfo->mem[0];
 
@@ -136,8 +157,17 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	uioinfo->irq_flags |= IRQF_DISABLED;
 	uioinfo->handler = uio_pdrv_genirq_handler;
 	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
+	uioinfo->open = uio_pdrv_genirq_open;
+	uioinfo->release = uio_pdrv_genirq_release;
 	uioinfo->priv = priv;
 
+	/* Enable Runtime PM for this device:
+	 * The device starts in suspended state to allow the hardware to be
+	 * turned off by default. The Runtime PM bus code should power on the
+	 * hardware and enable clocks at open().
+	 */
+	pm_runtime_enable(&pdev->dev);
+
 	ret = uio_register_device(&pdev->dev, priv->uioinfo);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register uio device\n");
@@ -157,16 +187,40 @@ static int uio_pdrv_genirq_remove(struct platform_device *pdev)
 	struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
 
 	uio_unregister_device(priv->uioinfo);
+	pm_runtime_disable(&pdev->dev);
 	kfree(priv);
 	return 0;
 }
 
+static int uio_pdrv_genirq_runtime_nop(struct device *dev)
+{
+	/* Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
+	 * are used at open() and release() time. This allows the
+	 * Runtime PM code to turn off power to the device while the
+	 * device is unused, ie before open() and after release().
+	 *
+	 * This Runtime PM callback does not need to save or restore
+	 * any registers since user space is responsbile for hardware
+	 * register reinitialization after open().
+	 */
+	return 0;
+}
+
+static struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = {
+	.runtime_suspend = uio_pdrv_genirq_runtime_nop,
+	.runtime_resume = uio_pdrv_genirq_runtime_nop,
+};
+
 static struct platform_driver uio_pdrv_genirq = {
 	.probe = uio_pdrv_genirq_probe,
 	.remove = uio_pdrv_genirq_remove,
 	.driver = {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
+		.pm = &uio_pdrv_genirq_dev_pm_ops,
 	},
 };
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7f8e83a954ac..9f986b417c5b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -251,6 +251,24 @@ config USB_PXA25X_SMALL
 	default y if USB_ETH
 	default y if USB_G_SERIAL
 
+config USB_GADGET_R8A66597
+	boolean "Renesas R8A66597 USB Peripheral Controller"
+	select USB_GADGET_DUALSPEED
+	help
+	   R8A66597 is a discrete USB host and peripheral controller chip that
+	   supports both full and high speed USB 2.0 data transfers.
+	   It has nine configurable endpoints, and endpoint zero.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "r8a66597_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_R8A66597
+	tristate
+	depends on USB_GADGET_R8A66597
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_PXA27X
 	boolean "PXA 27x"
 	depends on ARCH_PXA && (PXA27x || PXA3xx)
@@ -360,16 +378,6 @@ config USB_M66592
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config SUPERH_BUILT_IN_M66592
-	boolean "Enable SuperH built-in USB like the M66592"
-	depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
-	help
-	   SH7722 has USB like the M66592.
-
-	   The transfer rate is very slow when use "Ethernet Gadget".
-	   However, this problem is improved if change a value of
-	   NET_IP_ALIGN to 4.
-
 #
 # Controllers available only in discrete form (and all PCI controllers)
 #
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e6017e6bf6da..9d7b87c52e9f 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -23,6 +23,7 @@ ifeq ($(CONFIG_ARCH_MXC),y)
 fsl_usb2_udc-objs		+= fsl_mx3_udc.o
 endif
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
+obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 obj-$(CONFIG_USB_CI13XXX)	+= ci13xxx_udc.o
 obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 8e0e9a0b7364..f2d270b202f2 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -173,6 +173,12 @@
 // CONFIG_USB_GADGET_AU1X00
 // ...
 
+#ifdef CONFIG_USB_GADGET_R8A66597
+#define	gadget_is_r8a66597(g)	!strcmp("r8a66597_udc", (g)->name)
+#else
+#define	gadget_is_r8a66597(g)	0
+#endif
+
 
 /**
  * usb_gadget_controller_number - support bcdDevice id convention
@@ -239,6 +245,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x23;
 	else if (gadget_is_langwell(gadget))
 		return 0x24;
+	else if (gadget_is_r8a66597(gadget))
+		return 0x25;
 	return -ENOENT;
 }
 
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 43dcf9e1af6b..a8c8543d1b08 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -25,44 +25,18 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-
+#include <linux/err.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
 #include "m66592-udc.h"
 
-
 MODULE_DESCRIPTION("M66592 USB gadget driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Yoshihiro Shimoda");
 MODULE_ALIAS("platform:m66592_udc");
 
-#define DRIVER_VERSION	"18 Oct 2007"
-
-/* module parameters */
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-static unsigned short endian = M66592_LITTLE;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=0, little=0 (default=0)");
-#else
-static unsigned short clock = M66592_XTAL24;
-module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
-		"(default=16384)");
-
-static unsigned short vif = M66592_LDRV;
-module_param(vif, ushort, 0644);
-MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0 (default=32768)");
-
-static unsigned short endian;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
-
-static unsigned short irq_sense = M66592_INTL;
-module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=2, falling edge=0 "
-		"(default=2)");
-#endif
+#define DRIVER_VERSION	"21 July 2009"
 
 static const char udc_name[] = "m66592_udc";
 static const char *m66592_ep_name[] = {
@@ -244,6 +218,7 @@ static inline int get_buffer_size(struct m66592 *m66592, u16 pipenum)
 static inline void pipe_change(struct m66592 *m66592, u16 pipenum)
 {
 	struct m66592_ep *ep = m66592->pipenum2ep[pipenum];
+	unsigned short mbw;
 
 	if (ep->use_dma)
 		return;
@@ -252,7 +227,12 @@ static inline void pipe_change(struct m66592 *m66592, u16 pipenum)
 
 	ndelay(450);
 
-	m66592_bset(m66592, M66592_MBW, ep->fifosel);
+	if (m66592->pdata->on_chip)
+		mbw = M66592_MBW_32;
+	else
+		mbw = M66592_MBW_16;
+
+	m66592_bset(m66592, mbw, ep->fifosel);
 }
 
 static int pipe_buffer_setting(struct m66592 *m66592,
@@ -276,24 +256,27 @@ static int pipe_buffer_setting(struct m66592 *m66592,
 		buf_bsize = 0;
 		break;
 	case M66592_BULK:
-		bufnum = m66592->bi_bufnum +
-			 (info->pipe - M66592_BASE_PIPENUM_BULK) * 16;
-		m66592->bi_bufnum += 16;
+		/* isochronous pipes may be used as bulk pipes */
+		if (info->pipe > M66592_BASE_PIPENUM_BULK)
+			bufnum = info->pipe - M66592_BASE_PIPENUM_BULK;
+		else
+			bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC;
+
+		bufnum = M66592_BASE_BUFNUM + (bufnum * 16);
 		buf_bsize = 7;
 		pipecfg |= M66592_DBLB;
 		if (!info->dir_in)
 			pipecfg |= M66592_SHTNAK;
 		break;
 	case M66592_ISO:
-		bufnum = m66592->bi_bufnum +
+		bufnum = M66592_BASE_BUFNUM +
 			 (info->pipe - M66592_BASE_PIPENUM_ISOC) * 16;
-		m66592->bi_bufnum += 16;
 		buf_bsize = 7;
 		break;
 	}
-	if (m66592->bi_bufnum > M66592_MAX_BUFNUM) {
-		pr_err("m66592 pipe memory is insufficient(%d)\n",
-				m66592->bi_bufnum);
+
+	if (buf_bsize && ((bufnum + 16) >= M66592_MAX_BUFNUM)) {
+		pr_err("m66592 pipe memory is insufficient\n");
 		return -ENOMEM;
 	}
 
@@ -313,17 +296,6 @@ static void pipe_buffer_release(struct m66592 *m66592,
 	if (info->pipe == 0)
 		return;
 
-	switch (info->type) {
-	case M66592_BULK:
-		if (is_bulk_pipe(info->pipe))
-			m66592->bi_bufnum -= 16;
-		break;
-	case M66592_ISO:
-		if (is_isoc_pipe(info->pipe))
-			m66592->bi_bufnum -= 16;
-		break;
-	}
-
 	if (is_bulk_pipe(info->pipe)) {
 		m66592->bulk--;
 	} else if (is_interrupt_pipe(info->pipe))
@@ -340,6 +312,7 @@ static void pipe_buffer_release(struct m66592 *m66592,
 static void pipe_initialize(struct m66592_ep *ep)
 {
 	struct m66592 *m66592 = ep->m66592;
+	unsigned short mbw;
 
 	m66592_mdfy(m66592, 0, M66592_CURPIPE, ep->fifosel);
 
@@ -351,7 +324,12 @@ static void pipe_initialize(struct m66592_ep *ep)
 
 		ndelay(450);
 
-		m66592_bset(m66592, M66592_MBW, ep->fifosel);
+		if (m66592->pdata->on_chip)
+			mbw = M66592_MBW_32;
+		else
+			mbw = M66592_MBW_16;
+
+		m66592_bset(m66592, mbw, ep->fifosel);
 	}
 }
 
@@ -367,15 +345,13 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep,
 			ep->fifosel = M66592_D0FIFOSEL;
 			ep->fifoctr = M66592_D0FIFOCTR;
 			ep->fifotrn = M66592_D0FIFOTRN;
-#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
-		} else if (m66592->num_dma == 1) {
+		} else if (!m66592->pdata->on_chip && m66592->num_dma == 1) {
 			m66592->num_dma++;
 			ep->use_dma = 1;
 			ep->fifoaddr = M66592_D1FIFO;
 			ep->fifosel = M66592_D1FIFOSEL;
 			ep->fifoctr = M66592_D1FIFOCTR;
 			ep->fifotrn = M66592_D1FIFOTRN;
-#endif
 		} else {
 			ep->use_dma = 0;
 			ep->fifoaddr = M66592_CFIFO;
@@ -620,76 +596,120 @@ static void start_ep0(struct m66592_ep *ep, struct m66592_request *req)
 	}
 }
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
 static void init_controller(struct m66592 *m66592)
 {
-	m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);		/* High spd */
-	m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
-	m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
-	m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+	unsigned int endian;
 
-	/* This is a workaound for SH7722 2nd cut */
-	m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
-	m66592_bset(m66592, 0x1000, M66592_TESTMODE);
-	m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
+	if (m66592->pdata->on_chip) {
+		if (m66592->pdata->endian)
+			endian = 0; /* big endian */
+		else
+			endian = M66592_LITTLE; /* little endian */
 
-	m66592_bset(m66592, M66592_INTL, M66592_INTENB1);
+		m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);	/* High spd */
+		m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
 
-	m66592_write(m66592, 0, M66592_CFBCFG);
-	m66592_write(m66592, 0, M66592_D0FBCFG);
-	m66592_bset(m66592, endian, M66592_CFBCFG);
-	m66592_bset(m66592, endian, M66592_D0FBCFG);
-}
-#else	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
-static void init_controller(struct m66592 *m66592)
-{
-	m66592_bset(m66592, (vif & M66592_LDRV) | (endian & M66592_BIGEND),
-			M66592_PINCFG);
-	m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);		/* High spd */
-	m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL, M66592_SYSCFG);
+		/* This is a workaound for SH7722 2nd cut */
+		m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
+		m66592_bset(m66592, 0x1000, M66592_TESTMODE);
+		m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
 
-	m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
-	m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
-	m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_INTL, M66592_INTENB1);
+
+		m66592_write(m66592, 0, M66592_CFBCFG);
+		m66592_write(m66592, 0, M66592_D0FBCFG);
+		m66592_bset(m66592, endian, M66592_CFBCFG);
+		m66592_bset(m66592, endian, M66592_D0FBCFG);
+	} else {
+		unsigned int clock, vif, irq_sense;
+
+		if (m66592->pdata->endian)
+			endian = M66592_BIGEND; /* big endian */
+		else
+			endian = 0; /* little endian */
+
+		if (m66592->pdata->vif)
+			vif = M66592_LDRV; /* 3.3v */
+		else
+			vif = 0; /* 1.5v */
+
+		switch (m66592->pdata->xtal) {
+		case M66592_PLATDATA_XTAL_12MHZ:
+			clock = M66592_XTAL12;
+			break;
+		case M66592_PLATDATA_XTAL_24MHZ:
+			clock = M66592_XTAL24;
+			break;
+		case M66592_PLATDATA_XTAL_48MHZ:
+			clock = M66592_XTAL48;
+			break;
+		default:
+			pr_warning("m66592-udc: xtal configuration error\n");
+			clock = 0;
+		}
+
+		switch (m66592->irq_trigger) {
+		case IRQF_TRIGGER_LOW:
+			irq_sense = M66592_INTL;
+			break;
+		case IRQF_TRIGGER_FALLING:
+			irq_sense = 0;
+			break;
+		default:
+			pr_warning("m66592-udc: irq trigger config error\n");
+			irq_sense = 0;
+		}
 
-	m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
+		m66592_bset(m66592,
+			    (vif & M66592_LDRV) | (endian & M66592_BIGEND),
+			    M66592_PINCFG);
+		m66592_bset(m66592, M66592_HSE, M66592_SYSCFG);	/* High spd */
+		m66592_mdfy(m66592, clock & M66592_XTAL, M66592_XTAL,
+			    M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+
+		m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
 
-	msleep(3);
+		msleep(3);
 
-	m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_RCKE | M66592_PLLC, M66592_SYSCFG);
 
-	msleep(1);
+		msleep(1);
 
-	m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG);
+		m66592_bset(m66592, M66592_SCKE, M66592_SYSCFG);
 
-	m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1);
-	m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR,
-			M66592_DMA0CFG);
+		m66592_bset(m66592, irq_sense & M66592_INTL, M66592_INTENB1);
+		m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR,
+			     M66592_DMA0CFG);
+	}
 }
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
 
 static void disable_controller(struct m66592 *m66592)
 {
-#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
-	udelay(1);
-	m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG);
-	udelay(1);
-	m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG);
-	udelay(1);
-	m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG);
-#endif
+	if (!m66592->pdata->on_chip) {
+		m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG);
+		udelay(1);
+		m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG);
+	}
 }
 
 static void m66592_start_xclock(struct m66592 *m66592)
 {
-#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
 	u16 tmp;
 
-	tmp = m66592_read(m66592, M66592_SYSCFG);
-	if (!(tmp & M66592_XCKE))
-		m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
-#endif
+	if (!m66592->pdata->on_chip) {
+		tmp = m66592_read(m66592, M66592_SYSCFG);
+		if (!(tmp & M66592_XCKE))
+			m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
+	}
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1177,8 +1197,7 @@ static irqreturn_t m66592_irq(int irq, void *_m66592)
 	intsts0 = m66592_read(m66592, M66592_INTSTS0);
 	intenb0 = m66592_read(m66592, M66592_INTENB0);
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	if (!intsts0 && !intenb0) {
+	if (m66592->pdata->on_chip && !intsts0 && !intenb0) {
 		/*
 		 * When USB clock stops, it cannot read register. Even if a
 		 * clock stops, the interrupt occurs. So this driver turn on
@@ -1188,7 +1207,6 @@ static irqreturn_t m66592_irq(int irq, void *_m66592)
 		intsts0 = m66592_read(m66592, M66592_INTSTS0);
 		intenb0 = m66592_read(m66592, M66592_INTENB0);
 	}
-#endif
 
 	savepipe = m66592_read(m66592, M66592_CFIFOSEL);
 
@@ -1534,9 +1552,11 @@ static int __exit m66592_remove(struct platform_device *pdev)
 	iounmap(m66592->reg);
 	free_irq(platform_get_irq(pdev, 0), m66592);
 	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
-	clk_disable(m66592->clk);
-	clk_put(m66592->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (m66592->pdata->on_chip) {
+		clk_disable(m66592->clk);
+		clk_put(m66592->clk);
+	}
 #endif
 	kfree(m66592);
 	return 0;
@@ -1548,11 +1568,10 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r)
 
 static int __init m66592_probe(struct platform_device *pdev)
 {
-	struct resource *res;
-	int irq;
+	struct resource *res, *ires;
 	void __iomem *reg = NULL;
 	struct m66592 *m66592 = NULL;
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
 #endif
 	int ret = 0;
@@ -1565,10 +1584,11 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
 		ret = -ENODEV;
-		pr_err("platform_get_irq error.\n");
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
 		goto clean_up;
 	}
 
@@ -1579,6 +1599,12 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
+	if (pdev->dev.platform_data == NULL) {
+		dev_err(&pdev->dev, "no platform data\n");
+		ret = -ENODEV;
+		goto clean_up;
+	}
+
 	/* initialize ucd */
 	m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL);
 	if (m66592 == NULL) {
@@ -1586,6 +1612,9 @@ static int __init m66592_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
+	m66592->pdata = pdev->dev.platform_data;
+	m66592->irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
+
 	spin_lock_init(&m66592->lock);
 	dev_set_drvdata(&pdev->dev, m66592);
 
@@ -1603,24 +1632,25 @@ static int __init m66592_probe(struct platform_device *pdev)
 	m66592->timer.data = (unsigned long)m66592;
 	m66592->reg = reg;
 
-	m66592->bi_bufnum = M66592_BASE_BUFNUM;
-
-	ret = request_irq(irq, m66592_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED,
 			udc_name, m66592);
 	if (ret < 0) {
 		pr_err("request_irq error (%d)\n", ret);
 		goto clean_up;
 	}
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
-	snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
-	m66592->clk = clk_get(&pdev->dev, clk_name);
-	if (IS_ERR(m66592->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
-		ret = PTR_ERR(m66592->clk);
-		goto clean_up2;
+#ifdef CONFIG_HAVE_CLK
+	if (m66592->pdata->on_chip) {
+		snprintf(clk_name, sizeof(clk_name), "usbf%d", pdev->id);
+		m66592->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(m66592->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(m66592->clk);
+			goto clean_up2;
+		}
+		clk_enable(m66592->clk);
 	}
-	clk_enable(m66592->clk);
 #endif
 	INIT_LIST_HEAD(&m66592->gadget.ep_list);
 	m66592->gadget.ep0 = &m66592->ep[0].ep;
@@ -1662,12 +1692,14 @@ static int __init m66592_probe(struct platform_device *pdev)
 	return 0;
 
 clean_up3:
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
-	clk_disable(m66592->clk);
-	clk_put(m66592->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (m66592->pdata->on_chip) {
+		clk_disable(m66592->clk);
+		clk_put(m66592->clk);
+	}
 clean_up2:
 #endif
-	free_irq(irq, m66592);
+	free_irq(ires->start, m66592);
 clean_up:
 	if (m66592) {
 		if (m66592->ep0_req)
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 286ce07e7960..8b960deed680 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -23,10 +23,12 @@
 #ifndef __M66592_UDC_H__
 #define __M66592_UDC_H__
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
 #endif
 
+#include <linux/usb/m66592.h>
+
 #define M66592_SYSCFG		0x00
 #define M66592_XTAL		0xC000	/* b15-14: Crystal selection */
 #define   M66592_XTAL48		 0x8000		/* 48MHz */
@@ -76,11 +78,11 @@
 #define   M66592_P_TST_J	 0x0001		/* PERI TEST J */
 #define   M66592_P_TST_NORMAL	 0x0000		/* PERI Normal Mode */
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+/* built-in registers */
 #define M66592_CFBCFG		0x0A
 #define M66592_D0FBCFG		0x0C
 #define M66592_LITTLE		0x0100	/* b8: Little endian mode */
-#else
+/* external chip case */
 #define M66592_PINCFG		0x0A
 #define M66592_LDRV		0x8000	/* b15: Drive Current Adjust */
 #define M66592_BIGEND		0x0100	/* b8: Big endian mode */
@@ -100,8 +102,8 @@
 #define M66592_PKTM		0x0020	/* b5: Packet mode */
 #define M66592_DENDE		0x0010	/* b4: Dend enable */
 #define M66592_OBUS		0x0004	/* b2: OUTbus mode */
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
 
+/* common case */
 #define M66592_CFIFO		0x10
 #define M66592_D0FIFO		0x14
 #define M66592_D1FIFO		0x18
@@ -113,13 +115,9 @@
 #define M66592_REW		0x4000	/* b14: Buffer rewind */
 #define M66592_DCLRM		0x2000	/* b13: DMA buffer clear mode */
 #define M66592_DREQE		0x1000	/* b12: DREQ output enable */
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-#define M66592_MBW		0x0800	/* b11: Maximum bit width for FIFO */
-#else
-#define M66592_MBW		0x0400	/* b10: Maximum bit width for FIFO */
-#define   M66592_MBW_8		 0x0000   /*  8bit */
-#define   M66592_MBW_16		 0x0400   /* 16bit */
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
+#define M66592_MBW_8		0x0000   /*  8bit */
+#define M66592_MBW_16		0x0400   /* 16bit */
+#define M66592_MBW_32		0x0800   /* 32bit */
 #define M66592_TRENB		0x0200	/* b9: Transaction counter enable */
 #define M66592_TRCLR		0x0100	/* b8: Transaction counter clear */
 #define M66592_DEZPM		0x0080	/* b7: Zero-length packet mode */
@@ -480,9 +478,11 @@ struct m66592_ep {
 struct m66592 {
 	spinlock_t		lock;
 	void __iomem		*reg;
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
+	struct m66592_platdata	*pdata;
+	unsigned long		irq_trigger;
 
 	struct usb_gadget		gadget;
 	struct usb_gadget_driver	*driver;
@@ -506,7 +506,6 @@ struct m66592 {
 	int interrupt;
 	int isochronous;
 	int num_dma;
-	int bi_bufnum;	/* bulk and isochronous's bufnum */
 };
 
 #define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget)
@@ -547,13 +546,13 @@ static inline void m66592_read_fifo(struct m66592 *m66592,
 {
 	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
 
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	len = (len + 3) / 4;
-	insl(fifoaddr, buf, len);
-#else
-	len = (len + 1) / 2;
-	insw(fifoaddr, buf, len);
-#endif
+	if (m66592->pdata->on_chip) {
+		len = (len + 3) / 4;
+		insl(fifoaddr, buf, len);
+	} else {
+		len = (len + 1) / 2;
+		insw(fifoaddr, buf, len);
+	}
 }
 
 static inline void m66592_write(struct m66592 *m66592, u16 val,
@@ -567,33 +566,34 @@ static inline void m66592_write_fifo(struct m66592 *m66592,
 		void *buf, unsigned long len)
 {
 	unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
-#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
-	unsigned long count;
-	unsigned char *pb;
-	int i;
-
-	count = len / 4;
-	outsl(fifoaddr, buf, count);
-
-	if (len & 0x00000003) {
-		pb = buf + count * 4;
-		for (i = 0; i < (len & 0x00000003); i++) {
-			if (m66592_read(m66592, M66592_CFBCFG))	/* little */
-				outb(pb[i], fifoaddr + (3 - i));
-			else
-				outb(pb[i], fifoaddr + i);
+
+	if (m66592->pdata->on_chip) {
+		unsigned long count;
+		unsigned char *pb;
+		int i;
+
+		count = len / 4;
+		outsl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (m66592_read(m66592, M66592_CFBCFG))	/* le */
+					outb(pb[i], fifoaddr + (3 - i));
+				else
+					outb(pb[i], fifoaddr + i);
+			}
+		}
+	} else {
+		unsigned long odd = len & 0x0001;
+
+		len = len / 2;
+		outsw(fifoaddr, buf, len);
+		if (odd) {
+			unsigned char *p = buf + len*2;
+			outb(*p, fifoaddr);
 		}
 	}
-#else
-	unsigned long odd = len & 0x0001;
-
-	len = len / 2;
-	outsw(fifoaddr, buf, len);
-	if (odd) {
-		unsigned char *p = buf + len*2;
-		outb(*p, fifoaddr);
-	}
-#endif	/* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
 }
 
 static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
new file mode 100644
index 000000000000..e220fb8091a3
--- /dev/null
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -0,0 +1,1689 @@
+/*
+ * R8A66597 UDC (USB gadget)
+ *
+ * Copyright (C) 2006-2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "r8a66597-udc.h"
+
+#define DRIVER_VERSION	"2009-08-18"
+
+static const char udc_name[] = "r8a66597_udc";
+static const char *r8a66597_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7",
+	"ep8", "ep9",
+};
+
+static void disable_controller(struct r8a66597 *r8a66597);
+static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req);
+static void irq_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req);
+static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags);
+
+static void transfer_complete(struct r8a66597_ep *ep,
+		struct r8a66597_request *req, int status);
+
+/*-------------------------------------------------------------------------*/
+static inline u16 get_usb_speed(struct r8a66597 *r8a66597)
+{
+	return r8a66597_read(r8a66597, DVSTCTR0) & RHST;
+}
+
+static void enable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE,
+			INTENB0);
+	r8a66597_bset(r8a66597, (1 << pipenum), reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+static void disable_pipe_irq(struct r8a66597 *r8a66597, u16 pipenum,
+		unsigned long reg)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | NRDYE | BRDYE,
+			INTENB0);
+	r8a66597_bclr(r8a66597, (1 << pipenum), reg);
+	r8a66597_write(r8a66597, tmp, INTENB0);
+}
+
+static void r8a66597_usb_connect(struct r8a66597 *r8a66597)
+{
+	r8a66597_bset(r8a66597, CTRE, INTENB0);
+	r8a66597_bset(r8a66597, BEMPE | BRDYE, INTENB0);
+
+	r8a66597_bset(r8a66597, DPRPU, SYSCFG0);
+}
+
+static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	r8a66597_bclr(r8a66597, CTRE, INTENB0);
+	r8a66597_bclr(r8a66597, BEMPE | BRDYE, INTENB0);
+	r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+
+	r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock(&r8a66597->lock);
+	r8a66597->driver->disconnect(&r8a66597->gadget);
+	spin_lock(&r8a66597->lock);
+
+	disable_controller(r8a66597);
+	INIT_LIST_HEAD(&r8a66597->ep[0].queue);
+}
+
+static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 pid = 0;
+	unsigned long offset;
+
+	if (pipenum == 0)
+		pid = r8a66597_read(r8a66597, DCPCTR) & PID;
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		pid = r8a66597_read(r8a66597, offset) & PID;
+	} else
+		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+
+	return pid;
+}
+
+static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum,
+		u16 pid)
+{
+	unsigned long offset;
+
+	if (pipenum == 0)
+		r8a66597_mdfy(r8a66597, pid, PID, DCPCTR);
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_mdfy(r8a66597, pid, PID, offset);
+	} else
+		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+}
+
+static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_BUF);
+}
+
+static inline void pipe_stop(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_NAK);
+}
+
+static inline void pipe_stall(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	control_reg_set_pid(r8a66597, pipenum, PID_STALL);
+}
+
+static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 ret = 0;
+	unsigned long offset;
+
+	if (pipenum == 0)
+		ret = r8a66597_read(r8a66597, DCPCTR);
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		ret = r8a66597_read(r8a66597, offset);
+	} else
+		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+
+	return ret;
+}
+
+static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	pipe_stop(r8a66597, pipenum);
+
+	if (pipenum == 0)
+		r8a66597_bset(r8a66597, SQCLR, DCPCTR);
+	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_bset(r8a66597, SQCLR, offset);
+	} else
+		printk(KERN_ERR "unexpect pipe num(%d)\n", pipenum);
+}
+
+static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	u16 tmp;
+	int size;
+
+	if (pipenum == 0) {
+		tmp = r8a66597_read(r8a66597, DCPCFG);
+		if ((tmp & R8A66597_CNTMD) != 0)
+			size = 256;
+		else {
+			tmp = r8a66597_read(r8a66597, DCPMAXP);
+			size = tmp & MAXP;
+		}
+	} else {
+		r8a66597_write(r8a66597, pipenum, PIPESEL);
+		tmp = r8a66597_read(r8a66597, PIPECFG);
+		if ((tmp & R8A66597_CNTMD) != 0) {
+			tmp = r8a66597_read(r8a66597, PIPEBUF);
+			size = ((tmp >> 10) + 1) * 64;
+		} else {
+			tmp = r8a66597_read(r8a66597, PIPEMAXP);
+			size = tmp & MXPS;
+		}
+	}
+
+	return size;
+}
+
+static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip)
+		return MBW_32;
+	else
+		return MBW_16;
+}
+
+static inline void pipe_change(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
+
+	if (ep->use_dma)
+		return;
+
+	r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel);
+
+	ndelay(450);
+
+	r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+}
+
+static int pipe_buffer_setting(struct r8a66597 *r8a66597,
+		struct r8a66597_pipe_info *info)
+{
+	u16 bufnum = 0, buf_bsize = 0;
+	u16 pipecfg = 0;
+
+	if (info->pipe == 0)
+		return -EINVAL;
+
+	r8a66597_write(r8a66597, info->pipe, PIPESEL);
+
+	if (info->dir_in)
+		pipecfg |= R8A66597_DIR;
+	pipecfg |= info->type;
+	pipecfg |= info->epnum;
+	switch (info->type) {
+	case R8A66597_INT:
+		bufnum = 4 + (info->pipe - R8A66597_BASE_PIPENUM_INT);
+		buf_bsize = 0;
+		break;
+	case R8A66597_BULK:
+		/* isochronous pipes may be used as bulk pipes */
+		if (info->pipe > R8A66597_BASE_PIPENUM_BULK)
+			bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
+		else
+			bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
+
+		bufnum = R8A66597_BASE_BUFNUM + (bufnum * 16);
+		buf_bsize = 7;
+		pipecfg |= R8A66597_DBLB;
+		if (!info->dir_in)
+			pipecfg |= R8A66597_SHTNAK;
+		break;
+	case R8A66597_ISO:
+		bufnum = R8A66597_BASE_BUFNUM +
+			 (info->pipe - R8A66597_BASE_PIPENUM_ISOC) * 16;
+		buf_bsize = 7;
+		break;
+	}
+
+	if (buf_bsize && ((bufnum + 16) >= R8A66597_MAX_BUFNUM)) {
+		pr_err(KERN_ERR "r8a66597 pipe memory is insufficient\n");
+		return -ENOMEM;
+	}
+
+	r8a66597_write(r8a66597, pipecfg, PIPECFG);
+	r8a66597_write(r8a66597, (buf_bsize << 10) | (bufnum), PIPEBUF);
+	r8a66597_write(r8a66597, info->maxpacket, PIPEMAXP);
+	if (info->interval)
+		info->interval--;
+	r8a66597_write(r8a66597, info->interval, PIPEPERI);
+
+	return 0;
+}
+
+static void pipe_buffer_release(struct r8a66597 *r8a66597,
+				struct r8a66597_pipe_info *info)
+{
+	if (info->pipe == 0)
+		return;
+
+	if (is_bulk_pipe(info->pipe))
+		r8a66597->bulk--;
+	else if (is_interrupt_pipe(info->pipe))
+		r8a66597->interrupt--;
+	else if (is_isoc_pipe(info->pipe)) {
+		r8a66597->isochronous--;
+		if (info->type == R8A66597_BULK)
+			r8a66597->bulk--;
+	} else
+		printk(KERN_ERR "ep_release: unexpect pipenum (%d)\n",
+				info->pipe);
+}
+
+static void pipe_initialize(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	r8a66597_mdfy(r8a66597, 0, CURPIPE, ep->fifosel);
+
+	r8a66597_write(r8a66597, ACLRM, ep->pipectr);
+	r8a66597_write(r8a66597, 0, ep->pipectr);
+	r8a66597_write(r8a66597, SQCLR, ep->pipectr);
+	if (ep->use_dma) {
+		r8a66597_mdfy(r8a66597, ep->pipenum, CURPIPE, ep->fifosel);
+
+		ndelay(450);
+
+		r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	}
+}
+
+static void r8a66597_ep_setting(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				const struct usb_endpoint_descriptor *desc,
+				u16 pipenum, int dma)
+{
+	ep->use_dma = 0;
+	ep->fifoaddr = CFIFO;
+	ep->fifosel = CFIFOSEL;
+	ep->fifoctr = CFIFOCTR;
+	ep->fifotrn = 0;
+
+	ep->pipectr = get_pipectr_addr(pipenum);
+	ep->pipenum = pipenum;
+	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	r8a66597->pipenum2ep[pipenum] = ep;
+	r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK]
+		= ep;
+	INIT_LIST_HEAD(&ep->queue);
+}
+
+static void r8a66597_ep_release(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 pipenum = ep->pipenum;
+
+	if (pipenum == 0)
+		return;
+
+	if (ep->use_dma)
+		r8a66597->num_dma--;
+	ep->pipenum = 0;
+	ep->busy = 0;
+	ep->use_dma = 0;
+}
+
+static int alloc_pipe_config(struct r8a66597_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	struct r8a66597_pipe_info info;
+	int dma = 0;
+	unsigned char *counter;
+	int ret;
+
+	ep->desc = desc;
+
+	if (ep->pipenum)	/* already allocated pipe  */
+		return 0;
+
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) {
+			if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
+				printk(KERN_ERR "bulk pipe is insufficient\n");
+				return -ENODEV;
+			} else {
+				info.pipe = R8A66597_BASE_PIPENUM_ISOC
+						+ r8a66597->isochronous;
+				counter = &r8a66597->isochronous;
+			}
+		} else {
+			info.pipe = R8A66597_BASE_PIPENUM_BULK + r8a66597->bulk;
+			counter = &r8a66597->bulk;
+		}
+		info.type = R8A66597_BULK;
+		dma = 1;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) {
+			printk(KERN_ERR "interrupt pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt;
+		info.type = R8A66597_INT;
+		counter = &r8a66597->interrupt;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
+			printk(KERN_ERR "isochronous pipe is insufficient\n");
+			return -ENODEV;
+		}
+		info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous;
+		info.type = R8A66597_ISO;
+		counter = &r8a66597->isochronous;
+		break;
+	default:
+		printk(KERN_ERR "unexpect xfer type\n");
+		return -EINVAL;
+	}
+	ep->type = info.type;
+
+	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.interval = desc->bInterval;
+	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		info.dir_in = 1;
+	else
+		info.dir_in = 0;
+
+	ret = pipe_buffer_setting(r8a66597, &info);
+	if (ret < 0) {
+		printk(KERN_ERR "pipe_buffer_setting fail\n");
+		return ret;
+	}
+
+	(*counter)++;
+	if ((counter == &r8a66597->isochronous) && info.type == R8A66597_BULK)
+		r8a66597->bulk++;
+
+	r8a66597_ep_setting(r8a66597, ep, desc, info.pipe, dma);
+	pipe_initialize(ep);
+
+	return 0;
+}
+
+static int free_pipe_config(struct r8a66597_ep *ep)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	struct r8a66597_pipe_info info;
+
+	info.pipe = ep->pipenum;
+	info.type = ep->type;
+	pipe_buffer_release(r8a66597, &info);
+	r8a66597_ep_release(ep);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void pipe_irq_enable(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	enable_irq_ready(r8a66597, pipenum);
+	enable_irq_nrdy(r8a66597, pipenum);
+}
+
+static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	disable_irq_ready(r8a66597, pipenum);
+	disable_irq_nrdy(r8a66597, pipenum);
+}
+
+/* if complete is true, gadget driver complete function is not call */
+static void control_end(struct r8a66597 *r8a66597, unsigned ccpl)
+{
+	r8a66597->ep[0].internal_ccpl = ccpl;
+	pipe_start(r8a66597, 0);
+	r8a66597_bset(r8a66597, CCPL, DCPCTR);
+}
+
+static void start_ep0_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, ep->pipenum);
+	r8a66597_mdfy(r8a66597, ISEL, (ISEL | CURPIPE), CFIFOSEL);
+	r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+	if (req->req.length == 0) {
+		r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+		pipe_start(r8a66597, 0);
+		transfer_complete(ep, req, 0);
+	} else {
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+		irq_ep0_write(ep, req);
+	}
+}
+
+static void start_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 tmp;
+
+	pipe_change(r8a66597, ep->pipenum);
+	disable_irq_empty(r8a66597, ep->pipenum);
+	pipe_start(r8a66597, ep->pipenum);
+
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0))
+		pipe_irq_enable(r8a66597, ep->pipenum);
+	else
+		irq_packet_write(ep, req);
+}
+
+static void start_packet_read(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	u16 pipenum = ep->pipenum;
+
+	if (ep->pipenum == 0) {
+		r8a66597_mdfy(r8a66597, 0, (ISEL | CURPIPE), CFIFOSEL);
+		r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+		pipe_start(r8a66597, pipenum);
+		pipe_irq_enable(r8a66597, pipenum);
+	} else {
+		if (ep->use_dma) {
+			r8a66597_bset(r8a66597, TRCLR, ep->fifosel);
+			pipe_change(r8a66597, pipenum);
+			r8a66597_bset(r8a66597, TRENB, ep->fifosel);
+			r8a66597_write(r8a66597,
+				(req->req.length + ep->ep.maxpacket - 1)
+					/ ep->ep.maxpacket,
+				ep->fifotrn);
+		}
+		pipe_start(r8a66597, pipenum);	/* trigger once */
+		pipe_irq_enable(r8a66597, pipenum);
+	}
+}
+
+static void start_packet(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	if (ep->desc->bEndpointAddress & USB_DIR_IN)
+		start_packet_write(ep, req);
+	else
+		start_packet_read(ep, req);
+}
+
+static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	u16 ctsq;
+
+	ctsq = r8a66597_read(ep->r8a66597, INTSTS0) & CTSQ;
+
+	switch (ctsq) {
+	case CS_RDDS:
+		start_ep0_write(ep, req);
+		break;
+	case CS_WRDS:
+		start_packet_read(ep, req);
+		break;
+
+	case CS_WRND:
+		control_end(ep->r8a66597, 0);
+		break;
+	default:
+		printk(KERN_ERR "start_ep0: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static void init_controller(struct r8a66597 *r8a66597)
+{
+	u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+	u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+	u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
+
+	if (r8a66597->pdata->on_chip) {
+		r8a66597_bset(r8a66597, 0x04, SYSCFG1);
+		r8a66597_bset(r8a66597, HSE, SYSCFG0);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+		r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, irq_sense, INTENB1);
+		r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR,
+				DMA0CFG);
+	} else {
+		r8a66597_bset(r8a66597, vif | endian, PINCFG);
+		r8a66597_bset(r8a66597, HSE, SYSCFG0);		/* High spd */
+		r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata),
+				XTAL, SYSCFG0);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+		r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+
+		msleep(3);
+
+		r8a66597_bset(r8a66597, PLLC, SYSCFG0);
+
+		msleep(1);
+
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		r8a66597_bset(r8a66597, irq_sense, INTENB1);
+		r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR,
+			       DMA0CFG);
+	}
+}
+
+static void disable_controller(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip) {
+		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+
+		/* disable interrupts */
+		r8a66597_write(r8a66597, 0, INTENB0);
+		r8a66597_write(r8a66597, 0, INTENB1);
+		r8a66597_write(r8a66597, 0, BRDYENB);
+		r8a66597_write(r8a66597, 0, BEMPENB);
+		r8a66597_write(r8a66597, 0, NRDYENB);
+
+		/* clear status */
+		r8a66597_write(r8a66597, 0, BRDYSTS);
+		r8a66597_write(r8a66597, 0, NRDYSTS);
+		r8a66597_write(r8a66597, 0, BEMPSTS);
+
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+
+	} else {
+		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+		udelay(1);
+		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+		udelay(1);
+		udelay(1);
+		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+	}
+}
+
+static void r8a66597_start_xclock(struct r8a66597 *r8a66597)
+{
+	u16 tmp;
+
+	if (!r8a66597->pdata->on_chip) {
+		tmp = r8a66597_read(r8a66597, SYSCFG0);
+		if (!(tmp & XCKE))
+			r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+	}
+}
+
+static struct r8a66597_request *get_request_from_ep(struct r8a66597_ep *ep)
+{
+	return list_entry(ep->queue.next, struct r8a66597_request, queue);
+}
+
+/*-------------------------------------------------------------------------*/
+static void transfer_complete(struct r8a66597_ep *ep,
+		struct r8a66597_request *req, int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	int restart = 0;
+
+	if (unlikely(ep->pipenum == 0)) {
+		if (ep->internal_ccpl) {
+			ep->internal_ccpl = 0;
+			return;
+		}
+	}
+
+	list_del_init(&req->queue);
+	if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	if (!list_empty(&ep->queue))
+		restart = 1;
+
+	spin_unlock(&ep->r8a66597->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&ep->r8a66597->lock);
+
+	if (restart) {
+		req = get_request_from_ep(ep);
+		if (ep->desc)
+			start_packet(ep, req);
+	}
+}
+
+static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req)
+{
+	int i;
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, pipenum);
+	r8a66597_bset(r8a66597, ISEL, ep->fifosel);
+
+	i = 0;
+	do {
+		tmp = r8a66597_read(r8a66597, ep->fifoctr);
+		if (i++ > 100000) {
+			printk(KERN_ERR "pipe0 is busy. maybe cpu i/o bus"
+				"conflict. please power off this controller.");
+			return;
+		}
+		ndelay(1);
+	} while ((tmp & FRDY) == 0);
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(r8a66597, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		if (size > 0)
+			r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+		if ((size == 0) || ((size % ep->ep.maxpacket) != 0))
+			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(r8a66597, pipenum);
+		disable_irq_empty(r8a66597, pipenum);
+	} else {
+		disable_irq_ready(r8a66597, pipenum);
+		enable_irq_empty(r8a66597, pipenum);
+	}
+	pipe_start(r8a66597, pipenum);
+}
+
+static void irq_packet_write(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	u16 tmp;
+	unsigned bufsize;
+	size_t size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+
+	pipe_change(r8a66597, pipenum);
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		printk(KERN_ERR "write fifo not ready. pipnum=%d\n", pipenum);
+		return;
+	}
+
+	/* prepare parameters */
+	bufsize = get_buffer_size(r8a66597, pipenum);
+	buf = req->req.buf + req->req.actual;
+	size = min(bufsize, req->req.length - req->req.actual);
+
+	/* write fifo */
+	if (req->req.buf) {
+		r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+		if ((size == 0)
+				|| ((size % ep->ep.maxpacket) != 0)
+				|| ((bufsize != ep->ep.maxpacket)
+					&& (bufsize > size)))
+			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
+	}
+
+	/* update parameters */
+	req->req.actual += size;
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		disable_irq_ready(r8a66597, pipenum);
+		enable_irq_empty(r8a66597, pipenum);
+	} else {
+		disable_irq_empty(r8a66597, pipenum);
+		pipe_irq_enable(r8a66597, pipenum);
+	}
+}
+
+static void irq_packet_read(struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	u16 tmp;
+	int rcv_len, bufsize, req_len;
+	int size;
+	void *buf;
+	u16 pipenum = ep->pipenum;
+	struct r8a66597 *r8a66597 = ep->r8a66597;
+	int finish = 0;
+
+	pipe_change(r8a66597, pipenum);
+	tmp = r8a66597_read(r8a66597, ep->fifoctr);
+	if (unlikely((tmp & FRDY) == 0)) {
+		req->req.status = -EPIPE;
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		printk(KERN_ERR "read fifo not ready");
+		return;
+	}
+
+	/* prepare parameters */
+	rcv_len = tmp & DTLN;
+	bufsize = get_buffer_size(r8a66597, pipenum);
+
+	buf = req->req.buf + req->req.actual;
+	req_len = req->req.length - req->req.actual;
+	if (rcv_len < bufsize)
+		size = min(rcv_len, req_len);
+	else
+		size = min(bufsize, req_len);
+
+	/* update parameters */
+	req->req.actual += size;
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (size % ep->ep.maxpacket)
+			|| (size == 0)) {
+		pipe_stop(r8a66597, pipenum);
+		pipe_irq_disable(r8a66597, pipenum);
+		finish = 1;
+	}
+
+	/* read fifo */
+	if (req->req.buf) {
+		if (size == 0)
+			r8a66597_write(r8a66597, BCLR, ep->fifoctr);
+		else
+			r8a66597_read_fifo(r8a66597, ep->fifoaddr, buf, size);
+
+	}
+
+	if ((ep->pipenum != 0) && finish)
+		transfer_complete(ep, req, 0);
+}
+
+static void irq_pipe_ready(struct r8a66597 *r8a66597, u16 status, u16 enb)
+{
+	u16 check;
+	u16 pipenum;
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+
+	if ((status & BRDY0) && (enb & BRDY0)) {
+		r8a66597_write(r8a66597, ~BRDY0, BRDYSTS);
+		r8a66597_mdfy(r8a66597, 0, CURPIPE, CFIFOSEL);
+
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		irq_packet_read(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				r8a66597_write(r8a66597, ~check, BRDYSTS);
+				ep = r8a66597->pipenum2ep[pipenum];
+				req = get_request_from_ep(ep);
+				if (ep->desc->bEndpointAddress & USB_DIR_IN)
+					irq_packet_write(ep, req);
+				else
+					irq_packet_read(ep, req);
+			}
+		}
+	}
+}
+
+static void irq_pipe_empty(struct r8a66597 *r8a66597, u16 status, u16 enb)
+{
+	u16 tmp;
+	u16 check;
+	u16 pipenum;
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+
+	if ((status & BEMP0) && (enb & BEMP0)) {
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		irq_ep0_write(ep, req);
+	} else {
+		for (pipenum = 1; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
+			check = 1 << pipenum;
+			if ((status & check) && (enb & check)) {
+				r8a66597_write(r8a66597, ~check, BEMPSTS);
+				tmp = control_reg_get(r8a66597, pipenum);
+				if ((tmp & INBUFM) == 0) {
+					disable_irq_empty(r8a66597, pipenum);
+					pipe_irq_disable(r8a66597, pipenum);
+					pipe_stop(r8a66597, pipenum);
+					ep = r8a66597->pipenum2ep[pipenum];
+					req = get_request_from_ep(ep);
+					if (!list_empty(&ep->queue))
+						transfer_complete(ep, req, 0);
+				}
+			}
+		}
+	}
+}
+
+static void get_status(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	struct r8a66597_ep *ep;
+	u16 pid;
+	u16 status = 0;
+	u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pid = control_reg_get_pid(r8a66597, ep->pipenum);
+		if (pid == PID_STALL)
+			status = 1 << USB_ENDPOINT_HALT;
+		else
+			status = 0;
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		return;		/* exit */
+	}
+
+	r8a66597->ep0_data = cpu_to_le16(status);
+	r8a66597->ep0_req->buf = &r8a66597->ep0_data;
+	r8a66597->ep0_req->length = 2;
+	/* AV: what happens if we get called again before that gets through? */
+	spin_unlock(&r8a66597->lock);
+	r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_KERNEL);
+	spin_lock(&r8a66597->lock);
+}
+
+static void clear_feature(struct r8a66597 *r8a66597,
+				struct usb_ctrlrequest *ctrl)
+{
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct r8a66597_ep *ep;
+		struct r8a66597_request *req;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		if (!ep->wedge) {
+			pipe_stop(r8a66597, ep->pipenum);
+			control_reg_sqclr(r8a66597, ep->pipenum);
+			spin_unlock(&r8a66597->lock);
+			usb_ep_clear_halt(&ep->ep);
+			spin_lock(&r8a66597->lock);
+		}
+
+		control_end(r8a66597, 1);
+
+		req = get_request_from_ep(ep);
+		if (ep->busy) {
+			ep->busy = 0;
+			if (list_empty(&ep->queue))
+				break;
+			start_packet(ep, req);
+		} else if (!list_empty(&ep->queue))
+			pipe_start(r8a66597, ep->pipenum);
+		}
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		break;
+	}
+}
+
+static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+{
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_INTERFACE:
+		control_end(r8a66597, 1);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		struct r8a66597_ep *ep;
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
+		pipe_stall(r8a66597, ep->pipenum);
+
+		control_end(r8a66597, 1);
+		}
+		break;
+	default:
+		pipe_stall(r8a66597, 0);
+		break;
+	}
+}
+
+/* if return value is true, call class driver's setup() */
+static int setup_packet(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
+{
+	u16 *p = (u16 *)ctrl;
+	unsigned long offset = USBREQ;
+	int i, ret = 0;
+
+	/* read fifo */
+	r8a66597_write(r8a66597, ~VALID, INTSTS0);
+
+	for (i = 0; i < 4; i++)
+		p[i] = r8a66597_read(r8a66597, offset + i*2);
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			get_status(r8a66597, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			clear_feature(r8a66597, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			set_feature(r8a66597, ctrl);
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else
+		ret = 1;
+	return ret;
+}
+
+static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597)
+{
+	u16 speed = get_usb_speed(r8a66597);
+
+	switch (speed) {
+	case HSMODE:
+		r8a66597->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case FSMODE:
+		r8a66597->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
+		printk(KERN_ERR "USB speed unknown\n");
+	}
+}
+
+static void irq_device_state(struct r8a66597 *r8a66597)
+{
+	u16 dvsq;
+
+	dvsq = r8a66597_read(r8a66597, INTSTS0) & DVSQ;
+	r8a66597_write(r8a66597, ~DVST, INTSTS0);
+
+	if (dvsq == DS_DFLT) {
+		/* bus reset */
+		r8a66597->driver->disconnect(&r8a66597->gadget);
+		r8a66597_update_usb_speed(r8a66597);
+	}
+	if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG)
+		r8a66597_update_usb_speed(r8a66597);
+	if ((dvsq == DS_CNFG || dvsq == DS_ADDS)
+			&& r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		r8a66597_update_usb_speed(r8a66597);
+
+	r8a66597->old_dvsq = dvsq;
+}
+
+static void irq_control_stage(struct r8a66597 *r8a66597)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	struct usb_ctrlrequest ctrl;
+	u16 ctsq;
+
+	ctsq = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
+	r8a66597_write(r8a66597, ~CTRT, INTSTS0);
+
+	switch (ctsq) {
+	case CS_IDST: {
+		struct r8a66597_ep *ep;
+		struct r8a66597_request *req;
+		ep = &r8a66597->ep[0];
+		req = get_request_from_ep(ep);
+		transfer_complete(ep, req, 0);
+		}
+		break;
+
+	case CS_RDDS:
+	case CS_WRDS:
+	case CS_WRND:
+		if (setup_packet(r8a66597, &ctrl)) {
+			spin_unlock(&r8a66597->lock);
+			if (r8a66597->driver->setup(&r8a66597->gadget, &ctrl)
+				< 0)
+				pipe_stall(r8a66597, 0);
+			spin_lock(&r8a66597->lock);
+		}
+		break;
+	case CS_RDSS:
+	case CS_WRSS:
+		control_end(r8a66597, 0);
+		break;
+	default:
+		printk(KERN_ERR "ctrl_stage: unexpect ctsq(%x)\n", ctsq);
+		break;
+	}
+}
+
+static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
+{
+	struct r8a66597 *r8a66597 = _r8a66597;
+	u16 intsts0;
+	u16 intenb0;
+	u16 brdysts, nrdysts, bempsts;
+	u16 brdyenb, nrdyenb, bempenb;
+	u16 savepipe;
+	u16 mask0;
+
+	spin_lock(&r8a66597->lock);
+
+	intsts0 = r8a66597_read(r8a66597, INTSTS0);
+	intenb0 = r8a66597_read(r8a66597, INTENB0);
+
+	savepipe = r8a66597_read(r8a66597, CFIFOSEL);
+
+	mask0 = intsts0 & intenb0;
+	if (mask0) {
+		brdysts = r8a66597_read(r8a66597, BRDYSTS);
+		nrdysts = r8a66597_read(r8a66597, NRDYSTS);
+		bempsts = r8a66597_read(r8a66597, BEMPSTS);
+		brdyenb = r8a66597_read(r8a66597, BRDYENB);
+		nrdyenb = r8a66597_read(r8a66597, NRDYENB);
+		bempenb = r8a66597_read(r8a66597, BEMPENB);
+
+		if (mask0 & VBINT) {
+			r8a66597_write(r8a66597,  0xffff & ~VBINT,
+					INTSTS0);
+			r8a66597_start_xclock(r8a66597);
+
+			/* start vbus sampling */
+			r8a66597->old_vbus = r8a66597_read(r8a66597, INTSTS0)
+					& VBSTS;
+			r8a66597->scount = R8A66597_MAX_SAMPLING;
+
+			mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+		if (intsts0 & DVSQ)
+			irq_device_state(r8a66597);
+
+		if ((intsts0 & BRDY) && (intenb0 & BRDYE)
+				&& (brdysts & brdyenb))
+			irq_pipe_ready(r8a66597, brdysts, brdyenb);
+		if ((intsts0 & BEMP) && (intenb0 & BEMPE)
+				&& (bempsts & bempenb))
+			irq_pipe_empty(r8a66597, bempsts, bempenb);
+
+		if (intsts0 & CTRT)
+			irq_control_stage(r8a66597);
+	}
+
+	r8a66597_write(r8a66597, savepipe, CFIFOSEL);
+
+	spin_unlock(&r8a66597->lock);
+	return IRQ_HANDLED;
+}
+
+static void r8a66597_timer(unsigned long _r8a66597)
+{
+	struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597;
+	unsigned long flags;
+	u16 tmp;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	tmp = r8a66597_read(r8a66597, SYSCFG0);
+	if (r8a66597->scount > 0) {
+		tmp = r8a66597_read(r8a66597, INTSTS0) & VBSTS;
+		if (tmp == r8a66597->old_vbus) {
+			r8a66597->scount--;
+			if (r8a66597->scount == 0) {
+				if (tmp == VBSTS)
+					r8a66597_usb_connect(r8a66597);
+				else
+					r8a66597_usb_disconnect(r8a66597);
+			} else {
+				mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+			}
+		} else {
+			r8a66597->scount = R8A66597_MAX_SAMPLING;
+			r8a66597->old_vbus = tmp;
+			mod_timer(&r8a66597->timer,
+					jiffies + msecs_to_jiffies(50));
+		}
+	}
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+static int r8a66597_enable(struct usb_ep *_ep,
+			 const struct usb_endpoint_descriptor *desc)
+{
+	struct r8a66597_ep *ep;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	return alloc_pipe_config(ep, desc);
+}
+
+static int r8a66597_disable(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	BUG_ON(!ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = get_request_from_ep(ep);
+		spin_lock_irqsave(&ep->r8a66597->lock, flags);
+		transfer_complete(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+	}
+
+	pipe_irq_disable(ep->r8a66597, ep->pipenum);
+	return free_pipe_config(ep);
+}
+
+static struct usb_request *r8a66597_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct r8a66597_request *req;
+
+	req = kzalloc(sizeof(struct r8a66597_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void r8a66597_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct r8a66597_request *req;
+
+	req = container_of(_req, struct r8a66597_request, req);
+	kfree(req);
+}
+
+static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+	int request = 0;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = container_of(_req, struct r8a66597_request, req);
+
+	if (ep->r8a66597->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (ep->desc == NULL)	/* control */
+		start_ep0(ep, req);
+	else {
+		if (request && !ep->busy)
+			start_packet(ep, req);
+	}
+
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return 0;
+}
+
+static int r8a66597_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = container_of(_req, struct r8a66597_request, req);
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (!list_empty(&ep->queue))
+		transfer_complete(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return 0;
+}
+
+static int r8a66597_set_halt(struct usb_ep *_ep, int value)
+{
+	struct r8a66597_ep *ep;
+	struct r8a66597_request *req;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	req = get_request_from_ep(ep);
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+	if (value) {
+		ep->busy = 1;
+		pipe_stall(ep->r8a66597, ep->pipenum);
+	} else {
+		ep->busy = 0;
+		ep->wedge = 0;
+		pipe_stop(ep->r8a66597, ep->pipenum);
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+	return ret;
+}
+
+static int r8a66597_set_wedge(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+
+	if (!ep || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	ep->wedge = 1;
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+	return usb_ep_set_halt(_ep);
+}
+
+static void r8a66597_fifo_flush(struct usb_ep *_ep)
+{
+	struct r8a66597_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct r8a66597_ep, ep);
+	spin_lock_irqsave(&ep->r8a66597->lock, flags);
+	if (list_empty(&ep->queue) && !ep->busy) {
+		pipe_stop(ep->r8a66597, ep->pipenum);
+		r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr);
+	}
+	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+}
+
+static struct usb_ep_ops r8a66597_ep_ops = {
+	.enable		= r8a66597_enable,
+	.disable	= r8a66597_disable,
+
+	.alloc_request	= r8a66597_alloc_request,
+	.free_request	= r8a66597_free_request,
+
+	.queue		= r8a66597_queue,
+	.dequeue	= r8a66597_dequeue,
+
+	.set_halt	= r8a66597_set_halt,
+	.set_wedge	= r8a66597_set_wedge,
+	.fifo_flush	= r8a66597_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+static struct r8a66597 *the_controller;
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	struct r8a66597 *r8a66597 = the_controller;
+	int retval;
+
+	if (!driver
+			|| driver->speed != USB_SPEED_HIGH
+			|| !driver->bind
+			|| !driver->setup)
+		return -EINVAL;
+	if (!r8a66597)
+		return -ENODEV;
+	if (r8a66597->driver)
+		return -EBUSY;
+
+	/* hook up the driver */
+	driver->driver.bus = NULL;
+	r8a66597->driver = driver;
+	r8a66597->gadget.dev.driver = &driver->driver;
+
+	retval = device_add(&r8a66597->gadget.dev);
+	if (retval) {
+		printk(KERN_ERR "device_add error (%d)\n", retval);
+		goto error;
+	}
+
+	retval = driver->bind(&r8a66597->gadget);
+	if (retval) {
+		printk(KERN_ERR "bind to driver error (%d)\n", retval);
+		device_del(&r8a66597->gadget.dev);
+		goto error;
+	}
+
+	r8a66597_bset(r8a66597, VBSE, INTENB0);
+	if (r8a66597_read(r8a66597, INTSTS0) & VBSTS) {
+		r8a66597_start_xclock(r8a66597);
+		/* start vbus sampling */
+		r8a66597->old_vbus = r8a66597_read(r8a66597,
+					 INTSTS0) & VBSTS;
+		r8a66597->scount = R8A66597_MAX_SAMPLING;
+		mod_timer(&r8a66597->timer, jiffies + msecs_to_jiffies(50));
+	}
+
+	return 0;
+
+error:
+	r8a66597->driver = NULL;
+	r8a66597->gadget.dev.driver = NULL;
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct r8a66597 *r8a66597 = the_controller;
+	unsigned long flags;
+
+	if (driver != r8a66597->driver || !driver->unbind)
+		return -EINVAL;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN)
+		r8a66597_usb_disconnect(r8a66597);
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+
+	r8a66597_bclr(r8a66597, VBSE, INTENB0);
+
+	driver->unbind(&r8a66597->gadget);
+
+	init_controller(r8a66597);
+	disable_controller(r8a66597);
+
+	device_del(&r8a66597->gadget.dev);
+	r8a66597->driver = NULL;
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/*-------------------------------------------------------------------------*/
+static int r8a66597_get_frame(struct usb_gadget *_gadget)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(_gadget);
+	return r8a66597_read(r8a66597, FRMNUM) & 0x03FF;
+}
+
+static struct usb_gadget_ops r8a66597_gadget_ops = {
+	.get_frame		= r8a66597_get_frame,
+};
+
+static int __exit r8a66597_remove(struct platform_device *pdev)
+{
+	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+
+	del_timer_sync(&r8a66597->timer);
+	iounmap((void *)r8a66597->reg);
+	free_irq(platform_get_irq(pdev, 0), r8a66597);
+	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip) {
+		clk_disable(r8a66597->clk);
+		clk_put(r8a66597->clk);
+	}
+#endif
+	kfree(r8a66597);
+	return 0;
+}
+
+static void nop_completion(struct usb_ep *ep, struct usb_request *r)
+{
+}
+
+static int __init r8a66597_probe(struct platform_device *pdev)
+{
+#ifdef CONFIG_HAVE_CLK
+	char clk_name[8];
+#endif
+	struct resource *res, *ires;
+	int irq;
+	void __iomem *reg = NULL;
+	struct r8a66597 *r8a66597 = NULL;
+	int ret = 0;
+	int i;
+	unsigned long irq_trigger;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		printk(KERN_ERR "platform_get_resource error.\n");
+		goto clean_up;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	irq = ires->start;
+	irq_trigger = ires->flags & IRQF_TRIGGER_MASK;
+
+	if (irq < 0) {
+		ret = -ENODEV;
+		printk(KERN_ERR "platform_get_irq error.\n");
+		goto clean_up;
+	}
+
+	reg = ioremap(res->start, resource_size(res));
+	if (reg == NULL) {
+		ret = -ENOMEM;
+		printk(KERN_ERR "ioremap error.\n");
+		goto clean_up;
+	}
+
+	/* initialize ucd */
+	r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL);
+	if (r8a66597 == NULL) {
+		printk(KERN_ERR "kzalloc error\n");
+		goto clean_up;
+	}
+
+	spin_lock_init(&r8a66597->lock);
+	dev_set_drvdata(&pdev->dev, r8a66597);
+	r8a66597->pdata = pdev->dev.platform_data;
+	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
+
+	r8a66597->gadget.ops = &r8a66597_gadget_ops;
+	device_initialize(&r8a66597->gadget.dev);
+	dev_set_name(&r8a66597->gadget.dev, "gadget");
+	r8a66597->gadget.is_dualspeed = 1;
+	r8a66597->gadget.dev.parent = &pdev->dev;
+	r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	r8a66597->gadget.dev.release = pdev->dev.release;
+	r8a66597->gadget.name = udc_name;
+
+	init_timer(&r8a66597->timer);
+	r8a66597->timer.function = r8a66597_timer;
+	r8a66597->timer.data = (unsigned long)r8a66597;
+	r8a66597->reg = (unsigned long)reg;
+
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip) {
+		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+		r8a66597->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(r8a66597->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(r8a66597->clk);
+			goto clean_up;
+		}
+		clk_enable(r8a66597->clk);
+	}
+#endif
+
+	disable_controller(r8a66597); /* make sure controller is disabled */
+
+	ret = request_irq(irq, r8a66597_irq, IRQF_DISABLED | IRQF_SHARED,
+			udc_name, r8a66597);
+	if (ret < 0) {
+		printk(KERN_ERR "request_irq error (%d)\n", ret);
+		goto clean_up2;
+	}
+
+	INIT_LIST_HEAD(&r8a66597->gadget.ep_list);
+	r8a66597->gadget.ep0 = &r8a66597->ep[0].ep;
+	INIT_LIST_HEAD(&r8a66597->gadget.ep0->ep_list);
+	for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
+		struct r8a66597_ep *ep = &r8a66597->ep[i];
+
+		if (i != 0) {
+			INIT_LIST_HEAD(&r8a66597->ep[i].ep.ep_list);
+			list_add_tail(&r8a66597->ep[i].ep.ep_list,
+					&r8a66597->gadget.ep_list);
+		}
+		ep->r8a66597 = r8a66597;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = r8a66597_ep_name[i];
+		ep->ep.ops = &r8a66597_ep_ops;
+		ep->ep.maxpacket = 512;
+	}
+	r8a66597->ep[0].ep.maxpacket = 64;
+	r8a66597->ep[0].pipenum = 0;
+	r8a66597->ep[0].fifoaddr = CFIFO;
+	r8a66597->ep[0].fifosel = CFIFOSEL;
+	r8a66597->ep[0].fifoctr = CFIFOCTR;
+	r8a66597->ep[0].fifotrn = 0;
+	r8a66597->ep[0].pipectr = get_pipectr_addr(0);
+	r8a66597->pipenum2ep[0] = &r8a66597->ep[0];
+	r8a66597->epaddr2ep[0] = &r8a66597->ep[0];
+
+	the_controller = r8a66597;
+
+	r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
+							GFP_KERNEL);
+	if (r8a66597->ep0_req == NULL)
+		goto clean_up3;
+	r8a66597->ep0_req->complete = nop_completion;
+
+	init_controller(r8a66597);
+
+	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+	return 0;
+
+clean_up3:
+	free_irq(irq, r8a66597);
+clean_up2:
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip) {
+		clk_disable(r8a66597->clk);
+		clk_put(r8a66597->clk);
+	}
+#endif
+clean_up:
+	if (r8a66597) {
+		if (r8a66597->ep0_req)
+			r8a66597_free_request(&r8a66597->ep[0].ep,
+						r8a66597->ep0_req);
+		kfree(r8a66597);
+	}
+	if (reg)
+		iounmap(reg);
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct platform_driver r8a66597_driver = {
+	.remove =	__exit_p(r8a66597_remove),
+	.driver		= {
+		.name =	(char *) udc_name,
+	},
+};
+
+static int __init r8a66597_udc_init(void)
+{
+	return platform_driver_probe(&r8a66597_driver, r8a66597_probe);
+}
+module_init(r8a66597_udc_init);
+
+static void __exit r8a66597_udc_cleanup(void)
+{
+	platform_driver_unregister(&r8a66597_driver);
+}
+module_exit(r8a66597_udc_cleanup);
+
+MODULE_DESCRIPTION("R8A66597 USB gadget driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
new file mode 100644
index 000000000000..03087e7b9190
--- /dev/null
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -0,0 +1,256 @@
+/*
+ * R8A66597 UDC
+ *
+ * Copyright (C) 2007-2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __R8A66597_H__
+#define __R8A66597_H__
+
+#ifdef CONFIG_HAVE_CLK
+#include <linux/clk.h>
+#endif
+
+#include <linux/usb/r8a66597.h>
+
+#define R8A66597_MAX_SAMPLING	10
+
+#define R8A66597_MAX_NUM_PIPE	8
+#define R8A66597_MAX_NUM_BULK	3
+#define R8A66597_MAX_NUM_ISOC	2
+#define R8A66597_MAX_NUM_INT	2
+
+#define R8A66597_BASE_PIPENUM_BULK	3
+#define R8A66597_BASE_PIPENUM_ISOC	1
+#define R8A66597_BASE_PIPENUM_INT	6
+
+#define R8A66597_BASE_BUFNUM	6
+#define R8A66597_MAX_BUFNUM	0x4F
+
+#define is_bulk_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_BULK) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_BULK + R8A66597_MAX_NUM_BULK)))
+#define is_interrupt_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_INT) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_INT + R8A66597_MAX_NUM_INT)))
+#define is_isoc_pipe(pipenum)	\
+	((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \
+	 (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC)))
+
+struct r8a66597_pipe_info {
+	u16	pipe;
+	u16	epnum;
+	u16	maxpacket;
+	u16	type;
+	u16	interval;
+	u16	dir_in;
+};
+
+struct r8a66597_request {
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+struct r8a66597_ep {
+	struct usb_ep		ep;
+	struct r8a66597		*r8a66597;
+
+	struct list_head	queue;
+	unsigned		busy:1;
+	unsigned		wedge:1;
+	unsigned		internal_ccpl:1;	/* use only control */
+
+	/* this member can able to after r8a66597_enable */
+	unsigned		use_dma:1;
+	u16			pipenum;
+	u16			type;
+	const struct usb_endpoint_descriptor	*desc;
+	/* register address */
+	unsigned char		fifoaddr;
+	unsigned char		fifosel;
+	unsigned char		fifoctr;
+	unsigned char		fifotrn;
+	unsigned char		pipectr;
+};
+
+struct r8a66597 {
+	spinlock_t		lock;
+	unsigned long		reg;
+
+#ifdef CONFIG_HAVE_CLK
+	struct clk *clk;
+#endif
+	struct r8a66597_platdata	*pdata;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct r8a66597_ep	ep[R8A66597_MAX_NUM_PIPE];
+	struct r8a66597_ep	*pipenum2ep[R8A66597_MAX_NUM_PIPE];
+	struct r8a66597_ep	*epaddr2ep[16];
+
+	struct timer_list	timer;
+	struct usb_request	*ep0_req;	/* for internal request */
+	u16			ep0_data;	/* for internal request */
+	u16			old_vbus;
+	u16			scount;
+	u16			old_dvsq;
+
+	/* pipe config */
+	unsigned char bulk;
+	unsigned char interrupt;
+	unsigned char isochronous;
+	unsigned char num_dma;
+
+	unsigned irq_sense_low:1;
+};
+
+#define gadget_to_r8a66597(_gadget)	\
+		container_of(_gadget, struct r8a66597, gadget)
+#define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget)
+
+static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
+{
+	return inw(r8a66597->reg + offset);
+}
+
+static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
+				      unsigned long offset, u16 *buf,
+				      int len)
+{
+	if (r8a66597->pdata->on_chip) {
+		unsigned long fifoaddr = r8a66597->reg + offset;
+		unsigned long count;
+		union {
+			unsigned long dword;
+			unsigned char byte[4];
+		} data;
+		unsigned char *pb;
+		int i;
+
+		count = len / 4;
+		insl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			data.dword = inl(fifoaddr);
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++)
+				pb[i] = data.byte[i];
+		}
+	} else {
+		len = (len + 1) / 2;
+		insw(r8a66597->reg + offset, buf, len);
+	}
+}
+
+static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
+				  unsigned long offset)
+{
+	outw(val, r8a66597->reg + offset);
+}
+
+static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
+				       unsigned long offset, u16 *buf,
+				       int len)
+{
+	unsigned long fifoaddr = r8a66597->reg + offset;
+
+	if (r8a66597->pdata->on_chip) {
+		unsigned long count;
+		unsigned char *pb;
+		int i;
+
+		count = len / 4;
+		outsl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+					outb(pb[i], fifoaddr + i);
+				else
+					outb(pb[i], fifoaddr + 3 - i);
+			}
+		}
+	} else {
+		int odd = len & 0x0001;
+
+		len = len / 2;
+		outsw(fifoaddr, buf, len);
+		if (unlikely(odd)) {
+			buf = &buf[len];
+			outb((unsigned char)*buf, fifoaddr);
+		}
+	}
+}
+
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+	u16 clock = 0;
+
+	switch (pdata->xtal) {
+	case R8A66597_PLATDATA_XTAL_12MHZ:
+		clock = XTAL12;
+		break;
+	case R8A66597_PLATDATA_XTAL_24MHZ:
+		clock = XTAL24;
+		break;
+	case R8A66597_PLATDATA_XTAL_48MHZ:
+		clock = XTAL48;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+		break;
+	}
+
+	return clock;
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
+#define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
+
+#define enable_irq_ready(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define disable_irq_ready(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BRDYENB)
+#define enable_irq_empty(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define disable_irq_empty(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, BEMPENB)
+#define enable_irq_nrdy(r8a66597, pipenum)	\
+	enable_pipe_irq(r8a66597, pipenum, NRDYENB)
+#define disable_irq_nrdy(r8a66597, pipenum)	\
+	disable_pipe_irq(r8a66597, pipenum, NRDYENB)
+
+#endif	/* __R8A66597_H__ */
+
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1a920c70b5a1..f21ca7d27a43 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -336,13 +336,6 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
-config SUPERH_ON_CHIP_R8A66597
-	boolean "Enable SuperH on-chip R8A66597 USB"
-	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
-	help
-	   This driver enables support for the on-chip R8A66597 in the
-	   SH7366, SH7723 and SH7724 processors.
-
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index e18f74946e68..749b53742828 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -91,43 +91,43 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 	u16 tmp;
 	int i = 0;
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#if defined(CONFIG_HAVE_CLK)
-	clk_enable(r8a66597->clk);
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		clk_enable(r8a66597->clk);
 #endif
-	do {
-		r8a66597_write(r8a66597, SCKE, SYSCFG0);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 1000) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & SCKE) != SCKE);
-	r8a66597_write(r8a66597, 0x04, 0x02);
-#else
-	do {
-		r8a66597_write(r8a66597, USBE, SYSCFG0);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 1000) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & USBE) != USBE);
-	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
-	r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
-			SYSCFG0);
+		do {
+			r8a66597_write(r8a66597, SCKE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+		r8a66597_write(r8a66597, 0x04, 0x02);
+	} else {
+		do {
+			r8a66597_write(r8a66597, USBE, SYSCFG0);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 1000) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & USBE) != USBE);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+		r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata),
+			      XTAL, SYSCFG0);
 
-	i = 0;
-	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
-	do {
-		msleep(1);
-		tmp = r8a66597_read(r8a66597, SYSCFG0);
-		if (i++ > 500) {
-			printk(KERN_ERR "r8a66597: register access fail.\n");
-			return -ENXIO;
-		}
-	} while ((tmp & SCKE) != SCKE);
-#endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
+		i = 0;
+		r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+		do {
+			msleep(1);
+			tmp = r8a66597_read(r8a66597, SYSCFG0);
+			if (i++ > 500) {
+				printk(KERN_ERR "r8a66597: reg access fail.\n");
+				return -ENXIO;
+			}
+		} while ((tmp & SCKE) != SCKE);
+	}
 
 	return 0;
 }
@@ -136,15 +136,16 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
 {
 	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
 	udelay(1);
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#if defined(CONFIG_HAVE_CLK)
-	clk_disable(r8a66597->clk);
-#endif
-#else
-	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
-	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
-	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		clk_disable(r8a66597->clk);
 #endif
+	} else {
+		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+	}
 }
 
 static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
@@ -205,7 +206,7 @@ static int enable_controller(struct r8a66597 *r8a66597)
 
 	r8a66597_bset(r8a66597, SIGNE | SACKE, INTENB1);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_enable_port(r8a66597, port);
 
 	return 0;
@@ -218,7 +219,7 @@ static void disable_controller(struct r8a66597 *r8a66597)
 	r8a66597_write(r8a66597, 0, INTENB0);
 	r8a66597_write(r8a66597, 0, INTSTS0);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_disable_port(r8a66597, port);
 
 	r8a66597_clock_disable(r8a66597);
@@ -249,11 +250,12 @@ static int is_hub_limit(char *devpath)
 	return ((strlen(devpath) >= 4) ? 1 : 0);
 }
 
-static void get_port_number(char *devpath, u16 *root_port, u16 *hub_port)
+static void get_port_number(struct r8a66597 *r8a66597,
+			    char *devpath, u16 *root_port, u16 *hub_port)
 {
 	if (root_port) {
 		*root_port = (devpath[0] & 0x0F) - 1;
-		if (*root_port >= R8A66597_MAX_ROOT_HUB)
+		if (*root_port >= r8a66597->max_root_hub)
 			printk(KERN_ERR "r8a66597: Illegal root port number.\n");
 	}
 	if (hub_port)
@@ -355,7 +357,8 @@ static int make_r8a66597_device(struct r8a66597 *r8a66597,
 	INIT_LIST_HEAD(&dev->device_list);
 	list_add_tail(&dev->device_list, &r8a66597->child_device);
 
-	get_port_number(urb->dev->devpath, &dev->root_port, &dev->hub_port);
+	get_port_number(r8a66597, urb->dev->devpath,
+			&dev->root_port, &dev->hub_port);
 	if (!is_child_device(urb->dev->devpath))
 		r8a66597->root_hub[dev->root_port].dev = dev;
 
@@ -420,7 +423,7 @@ static void free_usb_address(struct r8a66597 *r8a66597,
 	list_del(&dev->device_list);
 	kfree(dev);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		if (r8a66597->root_hub[port].dev == dev) {
 			r8a66597->root_hub[port].dev = NULL;
 			break;
@@ -495,10 +498,20 @@ static void r8a66597_pipe_toggle(struct r8a66597 *r8a66597,
 		r8a66597_bset(r8a66597, SQCLR, pipe->pipectr);
 }
 
+static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
+{
+	if (r8a66597->pdata->on_chip)
+		return MBW_32;
+	else
+		return MBW_16;
+}
+
 /* this function must be called with interrupt disabled */
 static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum)
 {
-	r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
+	unsigned short mbw = mbw_value(r8a66597);
+
+	r8a66597_mdfy(r8a66597, mbw | pipenum, mbw | CURPIPE, CFIFOSEL);
 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
 }
 
@@ -506,11 +519,13 @@ static inline void cfifo_change(struct r8a66597 *r8a66597, u16 pipenum)
 static inline void fifo_change_from_pipe(struct r8a66597 *r8a66597,
 					 struct r8a66597_pipe *pipe)
 {
+	unsigned short mbw = mbw_value(r8a66597);
+
 	cfifo_change(r8a66597, 0);
-	r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D0FIFOSEL);
-	r8a66597_mdfy(r8a66597, MBW | 0, MBW | CURPIPE, D1FIFOSEL);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D0FIFOSEL);
+	r8a66597_mdfy(r8a66597, mbw | 0, mbw | CURPIPE, D1FIFOSEL);
 
-	r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum, MBW | CURPIPE,
+	r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum, mbw | CURPIPE,
 		      pipe->fifosel);
 	r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE, pipe->info.pipenum);
 }
@@ -742,9 +757,13 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597,
 				     struct r8a66597_pipe *pipe,
 				     struct urb *urb)
 {
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	int i;
 	struct r8a66597_pipe_info *info = &pipe->info;
+	unsigned short mbw = mbw_value(r8a66597);
+
+	/* pipe dma is only for external controlles */
+	if (r8a66597->pdata->on_chip)
+		return;
 
 	if ((pipe->info.pipenum != 0) && (info->type != R8A66597_INT)) {
 		for (i = 0; i < R8A66597_MAX_DMA_CHANNEL; i++) {
@@ -763,8 +782,8 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597,
 			set_pipe_reg_addr(pipe, i);
 
 			cfifo_change(r8a66597, 0);
-			r8a66597_mdfy(r8a66597, MBW | pipe->info.pipenum,
-				      MBW | CURPIPE, pipe->fifosel);
+			r8a66597_mdfy(r8a66597, mbw | pipe->info.pipenum,
+				      mbw | CURPIPE, pipe->fifosel);
 
 			r8a66597_reg_wait(r8a66597, pipe->fifosel, CURPIPE,
 					  pipe->info.pipenum);
@@ -772,7 +791,6 @@ static void enable_r8a66597_pipe_dma(struct r8a66597 *r8a66597,
 			break;
 		}
 	}
-#endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
 }
 
 /* this function must be called with interrupt disabled */
@@ -1769,7 +1787,7 @@ static void r8a66597_timer(unsigned long _r8a66597)
 
 	spin_lock_irqsave(&r8a66597->lock, flags);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_root_hub_control(r8a66597, port);
 
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
@@ -1807,7 +1825,7 @@ static void set_address_zero(struct r8a66597 *r8a66597, struct urb *urb)
 	u16 root_port, hub_port;
 
 	if (usb_address == 0) {
-		get_port_number(urb->dev->devpath,
+		get_port_number(r8a66597, urb->dev->devpath,
 				&root_port, &hub_port);
 		set_devadd_reg(r8a66597, 0,
 			       get_r8a66597_usb_speed(urb->dev->speed),
@@ -2082,7 +2100,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf)
 
 	*buf = 0;	/* initialize (no change) */
 
-	for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++) {
+	for (i = 0; i < r8a66597->max_root_hub; i++) {
 		if (r8a66597->root_hub[i].port & 0xffff0000)
 			*buf |= 1 << (i + 1);
 	}
@@ -2097,11 +2115,11 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597,
 {
 	desc->bDescriptorType = 0x29;
 	desc->bHubContrCurrent = 0;
-	desc->bNbrPorts = R8A66597_MAX_ROOT_HUB;
+	desc->bNbrPorts = r8a66597->max_root_hub;
 	desc->bDescLength = 9;
 	desc->bPwrOn2PwrGood = 0;
 	desc->wHubCharacteristics = cpu_to_le16(0x0011);
-	desc->bitmap[0] = ((1 << R8A66597_MAX_ROOT_HUB) - 1) << 1;
+	desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1;
 	desc->bitmap[1] = ~0;
 }
 
@@ -2129,7 +2147,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		}
 		break;
 	case ClearPortFeature:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		if (wLength != 0)
 			goto error;
@@ -2162,12 +2180,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		*buf = 0x00;
 		break;
 	case GetPortStatus:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		*(__le32 *)buf = cpu_to_le32(rh->port);
 		break;
 	case SetPortFeature:
-		if (wIndex > R8A66597_MAX_ROOT_HUB)
+		if (wIndex > r8a66597->max_root_hub)
 			goto error;
 		if (wLength != 0)
 			goto error;
@@ -2216,7 +2234,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd)
 
 	dbg("%s", __func__);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
@@ -2247,7 +2265,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 
 	dbg("%s", __func__);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
@@ -2305,16 +2323,16 @@ static struct hc_driver r8a66597_hc_driver = {
 };
 
 #if defined(CONFIG_PM)
-static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state)
+static int r8a66597_suspend(struct device *dev)
 {
-	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
 	int port;
 
 	dbg("%s", __func__);
 
 	disable_controller(r8a66597);
 
-	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) {
+	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
 		rh->port = 0x00000000;
@@ -2323,9 +2341,9 @@ static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int r8a66597_resume(struct platform_device *pdev)
+static int r8a66597_resume(struct device *dev)
 {
-	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
+	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
 	struct usb_hcd		*hcd = r8a66597_to_hcd(r8a66597);
 
 	dbg("%s", __func__);
@@ -2335,9 +2353,17 @@ static int r8a66597_resume(struct platform_device *pdev)
 
 	return 0;
 }
+
+static struct dev_pm_ops r8a66597_dev_pm_ops = {
+	.suspend = r8a66597_suspend,
+	.resume = r8a66597_resume,
+	.poweroff = r8a66597_suspend,
+	.restore = r8a66597_resume,
+};
+
+#define R8A66597_DEV_PM_OPS	(&r8a66597_dev_pm_ops)
 #else	/* if defined(CONFIG_PM) */
-#define r8a66597_suspend	NULL
-#define r8a66597_resume		NULL
+#define R8A66597_DEV_PM_OPS	NULL
 #endif
 
 static int __init_or_module r8a66597_remove(struct platform_device *pdev)
@@ -2348,8 +2374,9 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 	del_timer_sync(&r8a66597->rh_timer);
 	usb_remove_hcd(hcd);
 	iounmap((void *)r8a66597->reg);
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	clk_put(r8a66597->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
 #endif
 	usb_put_hcd(hcd);
 	return 0;
@@ -2357,7 +2384,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 
 static int __devinit r8a66597_probe(struct platform_device *pdev)
 {
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	char clk_name[8];
 #endif
 	struct resource *res = NULL, *ires;
@@ -2419,15 +2446,20 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	r8a66597->pdata = pdev->dev.platform_data;
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
-	r8a66597->clk = clk_get(&pdev->dev, clk_name);
-	if (IS_ERR(r8a66597->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
-		ret = PTR_ERR(r8a66597->clk);
-		goto clean_up2;
-	}
+	if (r8a66597->pdata->on_chip) {
+#ifdef CONFIG_HAVE_CLK
+		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
+		r8a66597->clk = clk_get(&pdev->dev, clk_name);
+		if (IS_ERR(r8a66597->clk)) {
+			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
+				clk_name);
+			ret = PTR_ERR(r8a66597->clk);
+			goto clean_up2;
+		}
 #endif
+		r8a66597->max_root_hub = 1;
+	} else
+		r8a66597->max_root_hub = 2;
 
 	spin_lock_init(&r8a66597->lock);
 	init_timer(&r8a66597->rh_timer);
@@ -2457,8 +2489,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	return 0;
 
 clean_up3:
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
-	clk_put(r8a66597->clk);
+#ifdef CONFIG_HAVE_CLK
+	if (r8a66597->pdata->on_chip)
+		clk_put(r8a66597->clk);
 clean_up2:
 #endif
 	usb_put_hcd(hcd);
@@ -2473,11 +2506,10 @@ clean_up:
 static struct platform_driver r8a66597_driver = {
 	.probe =	r8a66597_probe,
 	.remove =	r8a66597_remove,
-	.suspend =	r8a66597_suspend,
-	.resume =	r8a66597_resume,
 	.driver		= {
 		.name = (char *) hcd_name,
 		.owner	= THIS_MODULE,
+		.pm	= R8A66597_DEV_PM_OPS,
 	},
 };
 
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index d72680b433f9..228e3fb23854 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -26,390 +26,16 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
 #endif
 
 #include <linux/usb/r8a66597.h>
 
-#define SYSCFG0		0x00
-#define SYSCFG1		0x02
-#define SYSSTS0		0x04
-#define SYSSTS1		0x06
-#define DVSTCTR0	0x08
-#define DVSTCTR1	0x0A
-#define TESTMODE	0x0C
-#define PINCFG		0x0E
-#define DMA0CFG		0x10
-#define DMA1CFG		0x12
-#define CFIFO		0x14
-#define D0FIFO		0x18
-#define D1FIFO		0x1C
-#define CFIFOSEL	0x20
-#define CFIFOCTR	0x22
-#define CFIFOSIE	0x24
-#define D0FIFOSEL	0x28
-#define D0FIFOCTR	0x2A
-#define D1FIFOSEL	0x2C
-#define D1FIFOCTR	0x2E
-#define INTENB0		0x30
-#define INTENB1		0x32
-#define INTENB2		0x34
-#define BRDYENB		0x36
-#define NRDYENB		0x38
-#define BEMPENB		0x3A
-#define SOFCFG		0x3C
-#define INTSTS0		0x40
-#define INTSTS1		0x42
-#define INTSTS2		0x44
-#define BRDYSTS		0x46
-#define NRDYSTS		0x48
-#define BEMPSTS		0x4A
-#define FRMNUM		0x4C
-#define UFRMNUM		0x4E
-#define USBADDR		0x50
-#define USBREQ		0x54
-#define USBVAL		0x56
-#define USBINDX		0x58
-#define USBLENG		0x5A
-#define DCPCFG		0x5C
-#define DCPMAXP		0x5E
-#define DCPCTR		0x60
-#define PIPESEL		0x64
-#define PIPECFG		0x68
-#define PIPEBUF		0x6A
-#define PIPEMAXP	0x6C
-#define PIPEPERI	0x6E
-#define PIPE1CTR	0x70
-#define PIPE2CTR	0x72
-#define PIPE3CTR	0x74
-#define PIPE4CTR	0x76
-#define PIPE5CTR	0x78
-#define PIPE6CTR	0x7A
-#define PIPE7CTR	0x7C
-#define PIPE8CTR	0x7E
-#define PIPE9CTR	0x80
-#define PIPE1TRE	0x90
-#define PIPE1TRN	0x92
-#define PIPE2TRE	0x94
-#define PIPE2TRN	0x96
-#define PIPE3TRE	0x98
-#define PIPE3TRN	0x9A
-#define PIPE4TRE	0x9C
-#define	PIPE4TRN	0x9E
-#define	PIPE5TRE	0xA0
-#define	PIPE5TRN	0xA2
-#define DEVADD0		0xD0
-#define DEVADD1		0xD2
-#define DEVADD2		0xD4
-#define DEVADD3		0xD6
-#define DEVADD4		0xD8
-#define DEVADD5		0xDA
-#define DEVADD6		0xDC
-#define DEVADD7		0xDE
-#define DEVADD8		0xE0
-#define DEVADD9		0xE2
-#define DEVADDA		0xE4
-
-/* System Configuration Control Register */
-#define	XTAL		0xC000	/* b15-14: Crystal selection */
-#define	  XTAL48	 0x8000	  /* 48MHz */
-#define	  XTAL24	 0x4000	  /* 24MHz */
-#define	  XTAL12	 0x0000	  /* 12MHz */
-#define	XCKE		0x2000	/* b13: External clock enable */
-#define	PLLC		0x0800	/* b11: PLL control */
-#define	SCKE		0x0400	/* b10: USB clock enable */
-#define	PCSDIS		0x0200	/* b9: not CS wakeup */
-#define	LPSME		0x0100	/* b8: Low power sleep mode */
-#define	HSE		0x0080	/* b7: Hi-speed enable */
-#define	DCFM		0x0040	/* b6: Controller function select  */
-#define	DRPD		0x0020	/* b5: D+/- pull down control */
-#define	DPRPU		0x0010	/* b4: D+ pull up control */
-#define	USBE		0x0001	/* b0: USB module operation enable */
-
-/* System Configuration Status Register */
-#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
-#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
-#define	SOFEA		0x0020	/* b5: SOF monitor */
-#define	IDMON		0x0004	/* b3: ID-pin monitor */
-#define	LNST		0x0003	/* b1-0: D+, D- line status */
-#define	  SE1		 0x0003	  /* SE1 */
-#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
-#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
-#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
-#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
-#define	  SE0		 0x0000	  /* SE0 */
-
-/* Device State Control Register */
-#define	EXTLP0		0x0400	/* b10: External port */
-#define	VBOUT		0x0200	/* b9: VBUS output */
-#define	WKUP		0x0100	/* b8: Remote wakeup */
-#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
-#define	USBRST		0x0040	/* b6: USB reset enable */
-#define	RESUME		0x0020	/* b5: Resume enable */
-#define	UACT		0x0010	/* b4: USB bus enable */
-#define	RHST		0x0007	/* b1-0: Reset handshake status */
-#define	  HSPROC	 0x0004	  /* HS handshake is processing */
-#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
-#define	  FSMODE	 0x0002	  /* Full-Speed mode */
-#define	  LSMODE	 0x0001	  /* Low-Speed mode */
-#define	  UNDECID	 0x0000	  /* Undecided */
-
-/* Test Mode Register */
-#define	UTST			0x000F	/* b3-0: Test select */
-#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
-#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
-#define	  H_TST_K		 0x000A	  /* HOST TEST K */
-#define	  H_TST_J		 0x0009	  /* HOST TEST J */
-#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
-#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
-#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
-#define	  P_TST_K		 0x0002	  /* PERI TEST K */
-#define	  P_TST_J		 0x0001	  /* PERI TEST J */
-#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
-
-/* Data Pin Configuration Register */
-#define	LDRV			0x8000	/* b15: Drive Current Adjust */
-#define	  VIF1			  0x0000		/* VIF = 1.8V */
-#define	  VIF3			  0x8000		/* VIF = 3.3V */
-#define	INTA			0x0001	/* b1: USB INT-pin active */
-
-/* DMAx Pin Configuration Register */
-#define	DREQA			0x4000	/* b14: Dreq active select */
-#define	BURST			0x2000	/* b13: Burst mode */
-#define	DACKA			0x0400	/* b10: Dack active select */
-#define	DFORM			0x0380	/* b9-7: DMA mode select */
-#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
-#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
-#define	DENDA			0x0040	/* b6: Dend active select */
-#define	PKTM			0x0020	/* b5: Packet mode */
-#define	DENDE			0x0010	/* b4: Dend enable */
-#define	OBUS			0x0004	/* b2: OUTbus mode */
-
-/* CFIFO/DxFIFO Port Select Register */
-#define	RCNT		0x8000	/* b15: Read count mode */
-#define	REW		0x4000	/* b14: Buffer rewind */
-#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
-#define	DREQE		0x1000	/* b12: DREQ output enable */
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define	MBW		0x0800
-#else
-#define	MBW		0x0400	/* b10: Maximum bit width for FIFO access */
-#endif
-#define	  MBW_8		 0x0000	  /*  8bit */
-#define	  MBW_16	 0x0400	  /* 16bit */
-#define	BIGEND		0x0100	/* b8: Big endian mode */
-#define	  BYTE_LITTLE	 0x0000		/* little dendian */
-#define	  BYTE_BIG	 0x0100		/* big endifan */
-#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
-#define	CURPIPE		0x000F	/* b2-0: PIPE select */
-
-/* CFIFO/DxFIFO Port Control Register */
-#define	BVAL		0x8000	/* b15: Buffer valid flag */
-#define	BCLR		0x4000	/* b14: Buffer clear */
-#define	FRDY		0x2000	/* b13: FIFO ready */
-#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
-
-/* Interrupt Enable Register 0 */
-#define	VBSE	0x8000	/* b15: VBUS interrupt */
-#define	RSME	0x4000	/* b14: Resume interrupt */
-#define	SOFE	0x2000	/* b13: Frame update interrupt */
-#define	DVSE	0x1000	/* b12: Device state transition interrupt */
-#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
-
-/* Interrupt Enable Register 1 */
-#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
-#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
-#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
-#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
-#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
-
-/* BRDY Interrupt Enable/Status Register */
-#define	BRDY9		0x0200	/* b9: PIPE9 */
-#define	BRDY8		0x0100	/* b8: PIPE8 */
-#define	BRDY7		0x0080	/* b7: PIPE7 */
-#define	BRDY6		0x0040	/* b6: PIPE6 */
-#define	BRDY5		0x0020	/* b5: PIPE5 */
-#define	BRDY4		0x0010	/* b4: PIPE4 */
-#define	BRDY3		0x0008	/* b3: PIPE3 */
-#define	BRDY2		0x0004	/* b2: PIPE2 */
-#define	BRDY1		0x0002	/* b1: PIPE1 */
-#define	BRDY0		0x0001	/* b1: PIPE0 */
-
-/* NRDY Interrupt Enable/Status Register */
-#define	NRDY9		0x0200	/* b9: PIPE9 */
-#define	NRDY8		0x0100	/* b8: PIPE8 */
-#define	NRDY7		0x0080	/* b7: PIPE7 */
-#define	NRDY6		0x0040	/* b6: PIPE6 */
-#define	NRDY5		0x0020	/* b5: PIPE5 */
-#define	NRDY4		0x0010	/* b4: PIPE4 */
-#define	NRDY3		0x0008	/* b3: PIPE3 */
-#define	NRDY2		0x0004	/* b2: PIPE2 */
-#define	NRDY1		0x0002	/* b1: PIPE1 */
-#define	NRDY0		0x0001	/* b1: PIPE0 */
-
-/* BEMP Interrupt Enable/Status Register */
-#define	BEMP9		0x0200	/* b9: PIPE9 */
-#define	BEMP8		0x0100	/* b8: PIPE8 */
-#define	BEMP7		0x0080	/* b7: PIPE7 */
-#define	BEMP6		0x0040	/* b6: PIPE6 */
-#define	BEMP5		0x0020	/* b5: PIPE5 */
-#define	BEMP4		0x0010	/* b4: PIPE4 */
-#define	BEMP3		0x0008	/* b3: PIPE3 */
-#define	BEMP2		0x0004	/* b2: PIPE2 */
-#define	BEMP1		0x0002	/* b1: PIPE1 */
-#define	BEMP0		0x0001	/* b0: PIPE0 */
-
-/* SOF Pin Configuration Register */
-#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
-#define	BRDYM		0x0040	/* b6: BRDY clear timing */
-#define	INTL		0x0020	/* b5: Interrupt sense select */
-#define	EDGESTS		0x0010	/* b4:  */
-#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
-#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
-#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
-#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
-
-/* Interrupt Status Register 0 */
-#define	VBINT	0x8000	/* b15: VBUS interrupt */
-#define	RESM	0x4000	/* b14: Resume interrupt */
-#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
-#define	DVST	0x1000	/* b12: Device state transition interrupt */
-#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
-#define	VBSTS	0x0080	/* b7: VBUS input port */
-#define	DVSQ	0x0070	/* b6-4: Device state */
-#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
-#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
-#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
-#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
-#define	  DS_SUSP	 0x0040	  /* Suspend */
-#define	  DS_CNFG	 0x0030	  /* Configured */
-#define	  DS_ADDS	 0x0020	  /* Address */
-#define	  DS_DFLT	 0x0010	  /* Default */
-#define	  DS_POWR	 0x0000	  /* Powered */
-#define	DVSQS		0x0030	/* b5-4: Device state */
-#define	VALID		0x0008	/* b3: Setup packet detected flag */
-#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
-#define	  CS_SQER	 0x0006	  /* Sequence error */
-#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
-#define	  CS_WRSS	 0x0004	  /* Control write status stage */
-#define	  CS_WRDS	 0x0003	  /* Control write data stage */
-#define	  CS_RDSS	 0x0002	  /* Control read status stage */
-#define	  CS_RDDS	 0x0001	  /* Control read data stage */
-#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
-
-/* Interrupt Status Register 1 */
-#define	OVRCR		0x8000	/* b15: Over-current interrupt */
-#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
-#define	DTCH		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
-#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
-#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
-
-/* Frame Number Register */
-#define	OVRN		0x8000	/* b15: Overrun error */
-#define	CRCE		0x4000	/* b14: Received data error */
-#define	FRNM		0x07FF	/* b10-0: Frame number */
-
-/* Micro Frame Number Register */
-#define	UFRNM		0x0007	/* b2-0: Micro frame number */
-
-/* Default Control Pipe Maxpacket Size Register */
-/* Pipe Maxpacket Size Register */
-#define	DEVSEL	0xF000	/* b15-14: Device address select */
-#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
-
-/* Default Control Pipe Control Register */
-#define	BSTS		0x8000	/* b15: Buffer status */
-#define	SUREQ		0x4000	/* b14: Send USB request  */
-#define	CSCLR		0x2000	/* b13: complete-split status clear */
-#define	CSSTS		0x1000	/* b12: complete-split status */
-#define	SUREQCLR	0x0800	/* b11: stop setup request */
-#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY		0x0020	/* b5: pipe busy */
-#define	PINGE		0x0010	/* b4: ping enable */
-#define	CCPL		0x0004	/* b2: Enable control transfer complete */
-#define	PID		0x0003	/* b1-0: Response PID */
-#define	  PID_STALL11	 0x0003	  /* STALL */
-#define	  PID_STALL	 0x0002	  /* STALL */
-#define	  PID_BUF	 0x0001	  /* BUF */
-#define	  PID_NAK	 0x0000	  /* NAK */
-
-/* Pipe Window Select Register */
-#define	PIPENM		0x0007	/* b2-0: Pipe select */
-
-/* Pipe Configuration Register */
-#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
-#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
-#define	  R8A66597_INT	 0x8000		  /* Interrupt */
-#define	  R8A66597_BULK	 0x4000		  /* Bulk */
-#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
-#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
-#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
-#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
-#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
-#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
-
-/* Pipe Buffer Configuration Register */
-#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
-#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
-#define	PIPE0BUF	256
-#define	PIPExBUF	64
-
-/* Pipe Maxpacket Size Register */
-#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
-
-/* Pipe Cycle Configuration Register */
-#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
-#define	IITV	0x0007	/* b2-0: Isochronous interval */
-
-/* Pipex Control Register */
-#define	BSTS	0x8000	/* b15: Buffer status */
-#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
-#define	CSCLR	0x2000	/* b13: complete-split status clear */
-#define	CSSTS	0x1000	/* b12: complete-split status */
-#define	ATREPM	0x0400	/* b10: Auto repeat mode */
-#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
-#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY	0x0020	/* b5: pipe busy */
-#define	PID	0x0003	/* b1-0: Response PID */
-
-/* PIPExTRE */
-#define	TRENB		0x0200	/* b9: Transaction counter enable */
-#define	TRCLR		0x0100	/* b8: Transaction counter clear */
-
-/* PIPExTRN */
-#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
-
-/* DEVADDx */
-#define	UPPHUB		0x7800
-#define	HUBPORT		0x0700
-#define	USBSPD		0x00C0
-#define	RTPORT		0x0001
-
 #define R8A66597_MAX_NUM_PIPE		10
 #define R8A66597_BUF_BSIZE		8
 #define R8A66597_MAX_DEVICE		10
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define R8A66597_MAX_ROOT_HUB		1
-#else
 #define R8A66597_MAX_ROOT_HUB		2
-#endif
 #define R8A66597_MAX_SAMPLING		5
 #define R8A66597_RH_POLL_TIME		10
 #define R8A66597_MAX_DMA_CHANNEL	2
@@ -487,7 +113,7 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	unsigned long reg;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
 	struct r8a66597_platdata	*pdata;
@@ -504,6 +130,7 @@ struct r8a66597 {
 	unsigned short interval_map;
 	unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
 	unsigned char dma_map;
+	unsigned int max_root_hub;
 
 	struct list_head child_device;
 	unsigned long child_connect_map[4];
@@ -550,21 +177,22 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned long offset, u16 *buf,
 				      int len)
 {
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 
-	count = len / 4;
-	insl(fifoaddr, buf, count);
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		insl(fifoaddr, buf, count);
 
-	if (len & 0x00000003) {
-		unsigned long tmp = inl(fifoaddr);
-		memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
+		if (len & 0x00000003) {
+			unsigned long tmp = inl(fifoaddr);
+			memcpy((unsigned char *)buf + count * 4, &tmp,
+			       len & 0x03);
+		}
+	} else {
+		len = (len + 1) / 2;
+		insw(fifoaddr, buf, len);
 	}
-#else
-	len = (len + 1) / 2;
-	insw(r8a66597->reg + offset, buf, len);
-#endif
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
@@ -578,33 +206,33 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       int len)
 {
 	unsigned long fifoaddr = r8a66597->reg + offset;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long count;
 	unsigned char *pb;
 	int i;
 
-	count = len / 4;
-	outsl(fifoaddr, buf, count);
+	if (r8a66597->pdata->on_chip) {
+		count = len / 4;
+		outsl(fifoaddr, buf, count);
+
+		if (len & 0x00000003) {
+			pb = (unsigned char *)buf + count * 4;
+			for (i = 0; i < (len & 0x00000003); i++) {
+				if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+					outb(pb[i], fifoaddr + i);
+				else
+					outb(pb[i], fifoaddr + 3 - i);
+			}
+		}
+	} else {
+		int odd = len & 0x0001;
 
-	if (len & 0x00000003) {
-		pb = (unsigned char *)buf + count * 4;
-		for (i = 0; i < (len & 0x00000003); i++) {
-			if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
-				outb(pb[i], fifoaddr + i);
-			else
-				outb(pb[i], fifoaddr + 3 - i);
+		len = len / 2;
+		outsw(fifoaddr, buf, len);
+		if (unlikely(odd)) {
+			buf = &buf[len];
+			outb((unsigned char)*buf, fifoaddr);
 		}
 	}
-#else
-	int odd = len & 0x0001;
-
-	len = len / 2;
-	outsw(fifoaddr, buf, len);
-	if (unlikely(odd)) {
-		buf = &buf[len];
-		outb((unsigned char)*buf, fifoaddr);
-	}
-#endif
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
index 9052bcb4f528..e7eeb63fab23 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -887,8 +887,7 @@ static int hwarc_post_reset(struct usb_interface *iface)
 	struct hwarc *hwarc = usb_get_intfdata(iface);
 	struct uwb_rc *uwb_rc = hwarc->uwb_rc;
 
-	uwb_rc_post_reset(uwb_rc);
-	return 0;
+	return uwb_rc_post_reset(uwb_rc);
 }
 
 /** USB device ID's that we handle */
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
index 9cf21e6bb624..9611ef3b787a 100644
--- a/drivers/uwb/lc-rc.c
+++ b/drivers/uwb/lc-rc.c
@@ -288,8 +288,8 @@ error_sys_add:
 error_dev_add:
 error_rc_setup:
 	rc->stop(rc);
-	uwbd_stop(rc);
 error_rc_start:
+	uwbd_stop(rc);
 	return result;
 }
 EXPORT_SYMBOL_GPL(uwb_rc_add);
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
index 70f8050221ff..7f0512e43d9d 100644
--- a/drivers/uwb/reset.c
+++ b/drivers/uwb/reset.c
@@ -30,6 +30,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/delay.h>
 
 #include "uwb-internal.h"
 
@@ -323,13 +324,15 @@ int uwbd_msg_handle_reset(struct uwb_event *evt)
 
 	dev_info(&rc->uwb_dev.dev, "resetting radio controller\n");
 	ret = rc->reset(rc);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret);
 		goto error;
 	}
 	return 0;
 error:
-	/* Nothing can be done except try the reset again. */
+	/* Nothing can be done except try the reset again. Wait a bit
+	   to avoid reset loops during probe() or remove(). */
+	msleep(1000);
 	uwb_rc_reset_all(rc);
 	return ret;
 }
@@ -368,22 +371,20 @@ void uwb_rc_pre_reset(struct uwb_rc *rc)
 }
 EXPORT_SYMBOL_GPL(uwb_rc_pre_reset);
 
-void uwb_rc_post_reset(struct uwb_rc *rc)
+int uwb_rc_post_reset(struct uwb_rc *rc)
 {
 	int ret;
 
 	ret = rc->start(rc);
 	if (ret)
-		goto error;
+		goto out;
 	ret = uwb_rc_mac_addr_set(rc, &rc->uwb_dev.mac_addr);
 	if (ret)
-		goto error;
+		goto out;
 	ret = uwb_rc_dev_addr_set(rc, &rc->uwb_dev.dev_addr);
 	if (ret)
-		goto error;
-	return;
-error:
-	/* Nothing can be done except try the reset again. */
-	uwb_rc_reset_all(rc);
+		goto out;
+out:
+	return ret;
 }
 EXPORT_SYMBOL_GPL(uwb_rc_post_reset);
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index 5ad36164c13b..cdd6c8efc9f8 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -66,7 +66,7 @@ int umc_controller_reset(struct umc_dev *umc)
 		return -EAGAIN;
 	ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper);
 	if (ret >= 0)
-		device_for_each_child(parent, parent, umc_bus_post_reset_helper);
+		ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper);
 	up(&parent->sem);
 
 	return ret;
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
index 57bd6bfef37e..5a777d8624da 100644
--- a/drivers/uwb/uwbd.c
+++ b/drivers/uwb/uwbd.c
@@ -187,12 +187,12 @@ int uwbd_event_handle_urc(struct uwb_event *evt)
 	event = le16_to_cpu(evt->notif.rceb->wEvent);
 	context = evt->notif.rceb->bEventContext;
 
-	if (type > ARRAY_SIZE(uwbd_urc_evt_type_handlers))
+	if (type >= ARRAY_SIZE(uwbd_urc_evt_type_handlers))
 		goto out;
 	type_table = &uwbd_urc_evt_type_handlers[type];
 	if (type_table->uwbd_events == NULL)
 		goto out;
-	if (event > type_table->size)
+	if (event >= type_table->size)
 		goto out;
 	handler = type_table->uwbd_events[event].handler;
 	if (handler == NULL)
diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c
index 19a1dd129212..1d9a6f54658e 100644
--- a/drivers/uwb/whc-rc.c
+++ b/drivers/uwb/whc-rc.c
@@ -443,8 +443,7 @@ static int whcrc_post_reset(struct umc_dev *umc)
 	struct whcrc *whcrc = umc_get_drvdata(umc);
 	struct uwb_rc *uwb_rc = whcrc->uwb_rc;
 
-	uwb_rc_post_reset(uwb_rc);
-	return 0;
+	return uwb_rc_post_reset(uwb_rc);
 }
 
 /* PCI device ID's that we handle [so it gets loaded] */
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index cef3e1d9b92e..11af4cb8924e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1869,7 +1869,7 @@ config FB_W100
 
 config FB_SH_MOBILE_LCDC
 	tristate "SuperH Mobile LCDC framebuffer support"
-	depends on FB && SUPERH
+	depends on FB && SUPERH && HAVE_CLK
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
diff --git a/drivers/video/console/.gitignore b/drivers/video/console/.gitignore
deleted file mode 100644
index 0c258b45439c..000000000000
--- a/drivers/video/console/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# conmakehash generated file
-promcon_tbl.c
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 2f50a80b413e..fc7d9bbb548c 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -67,16 +67,9 @@ config SGI_NEWPORT_CONSOLE
 
 #  bool 'IODC console' CONFIG_IODC_CONSOLE
 
-config PROM_CONSOLE
-	bool "PROM console"
-	depends on SPARC
-	help
-	  Say Y to build a console driver for Sun machines that uses the
-	  terminal emulation built into their console PROMS.
-
 config DUMMY_CONSOLE
 	bool
-	depends on PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
+	depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
 	default y
 
 config DUMMY_CONSOLE_COLUMNS
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index ac46cc3f6a2a..a862e9173ebe 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -22,7 +22,6 @@ font-objs += $(font-objs-y)
 
 obj-$(CONFIG_DUMMY_CONSOLE)       += dummycon.o
 obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o font.o
-obj-$(CONFIG_PROM_CONSOLE)        += promcon.o promcon_tbl.o
 obj-$(CONFIG_STI_CONSOLE)         += sticon.o sticore.o font.o
 obj-$(CONFIG_VGA_CONSOLE)         += vgacon.o
 obj-$(CONFIG_MDA_CONSOLE)         += mdacon.o
@@ -40,14 +39,3 @@ obj-$(CONFIG_FB_STI)              += sticore.o font.o
 ifeq ($(CONFIG_USB_SISUSBVGA_CON),y)
 obj-$(CONFIG_USB_SISUSBVGA)           += font.o
 endif
-
-# Targets that kbuild needs to know about
-targets := promcon_tbl.c
-
-quiet_cmd_conmakehash = CNMKHSH $@
-      cmd_conmakehash = scripts/conmakehash $< | \
-		sed -e '/\#include <[^>]*>/p' -e 's/types/init/' \
-		-e 's/dfont\(_uni.*\]\)/promfont\1 /' > $@
-
-$(obj)/promcon_tbl.c: $(src)/prom.uni
-	$(call cmd,conmakehash)
diff --git a/drivers/video/console/prom.uni b/drivers/video/console/prom.uni
deleted file mode 100644
index 58f9c04ed9d3..000000000000
--- a/drivers/video/console/prom.uni
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Unicode mapping table for font in Sun PROM
-# 
-#
-0x20-0x7e	idem
-0xa0-0xff	idem
-#
-0x7c		U+2502
-0x2d		U+2500
-0x2b		U+250c U+2510 U+2514 U+2518 U+251c U+2524 U+252c U+2534 U+253c
-0xa4		U+fffd
diff --git a/drivers/video/console/promcon.c b/drivers/video/console/promcon.c
deleted file mode 100644
index ae02e4eb18e7..000000000000
--- a/drivers/video/console/promcon.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/* $Id: promcon.c,v 1.17 2000/07/26 23:02:52 davem Exp $
- * Console driver utilizing PROM sun terminal emulation
- *
- * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
- * Copyright (C) 1998  Jakub Jelinek  (jj@ultra.linux.cz)
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/vt_kern.h>
-#include <linux/selection.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/kd.h>
-
-#include <asm/oplib.h>
-#include <asm/uaccess.h>
-
-static short pw = 80 - 1, ph = 34 - 1;
-static short px, py;
-static unsigned long promcon_uni_pagedir[2];
-
-extern u8 promfont_unicount[];
-extern u16 promfont_unitable[];
-
-#define PROMCON_COLOR 0
-
-#if PROMCON_COLOR
-#define inverted(s)	((((s) & 0x7700) == 0x0700) ? 0 : 1)
-#else
-#define inverted(s)	(((s) & 0x0800) ? 1 : 0)
-#endif
-
-static __inline__ void
-promcon_puts(char *buf, int cnt)
-{
-	prom_printf("%*.*s", cnt, cnt, buf);
-}
-
-static int
-promcon_start(struct vc_data *conp, char *b)
-{
-	unsigned short *s = (unsigned short *)
-			(conp->vc_origin + py * conp->vc_size_row + (px << 1));
-	u16 cs;
-
-	cs = scr_readw(s);
-	if (px == pw) {
-		unsigned short *t = s - 1;
-		u16 ct = scr_readw(t);
-
-		if (inverted(cs) && inverted(ct))
-			return sprintf(b, "\b\033[7m%c\b\033[@%c\033[m", cs,
-				       ct);
-		else if (inverted(cs))
-			return sprintf(b, "\b\033[7m%c\033[m\b\033[@%c", cs,
-				       ct);
-		else if (inverted(ct))
-			return sprintf(b, "\b%c\b\033[@\033[7m%c\033[m", cs,
-				       ct);
-		else
-			return sprintf(b, "\b%c\b\033[@%c", cs, ct);
-	}
-
-	if (inverted(cs))
-		return sprintf(b, "\033[7m%c\033[m\b", cs);
-	else
-		return sprintf(b, "%c\b", cs);
-}
-
-static int
-promcon_end(struct vc_data *conp, char *b)
-{
-	unsigned short *s = (unsigned short *)
-			(conp->vc_origin + py * conp->vc_size_row + (px << 1));
-	char *p = b;
-	u16 cs;
-
-	b += sprintf(b, "\033[%d;%dH", py + 1, px + 1);
-
-	cs = scr_readw(s);
-	if (px == pw) {
-		unsigned short *t = s - 1;
-		u16 ct = scr_readw(t);
-
-		if (inverted(cs) && inverted(ct))
-			b += sprintf(b, "\b%c\b\033[@\033[7m%c\033[m", cs, ct);
-		else if (inverted(cs))
-			b += sprintf(b, "\b%c\b\033[@%c", cs, ct);
-		else if (inverted(ct))
-			b += sprintf(b, "\b\033[7m%c\b\033[@%c\033[m", cs, ct);
-		else
-			b += sprintf(b, "\b\033[7m%c\033[m\b\033[@%c", cs, ct);
-		return b - p;
-	}
-
-	if (inverted(cs))
-		b += sprintf(b, "%c\b", cs);
-	else
-		b += sprintf(b, "\033[7m%c\033[m\b", cs);
-	return b - p;
-}
-
-const char *promcon_startup(void)
-{
-	const char *display_desc = "PROM";
-	int node;
-	char buf[40];
-	
-	node = prom_getchild(prom_root_node);
-	node = prom_searchsiblings(node, "options");
-	if (prom_getproperty(node,  "screen-#columns", buf, 40) != -1) {
-		pw = simple_strtoul(buf, NULL, 0);
-		if (pw < 10 || pw > 256)
-			pw = 80;
-		pw--;
-	}
-	if (prom_getproperty(node,  "screen-#rows", buf, 40) != -1) {
-		ph = simple_strtoul(buf, NULL, 0);
-		if (ph < 10 || ph > 256)
-			ph = 34;
-		ph--;
-	}
-	promcon_puts("\033[H\033[J", 6);
-	return display_desc;
-}
-
-static void
-promcon_init_unimap(struct vc_data *conp)
-{
-	mm_segment_t old_fs = get_fs();
-	struct unipair *p, *p1;
-	u16 *q;
-	int i, j, k;
-	
-	p = kmalloc(256*sizeof(struct unipair), GFP_KERNEL);
-	if (!p) return;
-	
-	q = promfont_unitable;
-	p1 = p;
-	k = 0;
-	for (i = 0; i < 256; i++)
-		for (j = promfont_unicount[i]; j; j--) {
-			p1->unicode = *q++;
-			p1->fontpos = i;
-			p1++;
-			k++;
-		}
-	set_fs(KERNEL_DS);
-	con_clear_unimap(conp, NULL);
-	con_set_unimap(conp, k, p);
-	con_protect_unimap(conp, 1);
-	set_fs(old_fs);
-	kfree(p);
-}
-
-static void
-promcon_init(struct vc_data *conp, int init)
-{
-	unsigned long p;
-	
-	conp->vc_can_do_color = PROMCON_COLOR;
-	if (init) {
-		conp->vc_cols = pw + 1;
-		conp->vc_rows = ph + 1;
-	}
-	p = *conp->vc_uni_pagedir_loc;
-	if (conp->vc_uni_pagedir_loc == &conp->vc_uni_pagedir ||
-	    !--conp->vc_uni_pagedir_loc[1])
-		con_free_unimap(conp);
-	conp->vc_uni_pagedir_loc = promcon_uni_pagedir;
-	promcon_uni_pagedir[1]++;
-	if (!promcon_uni_pagedir[0] && p) {
-		promcon_init_unimap(conp);
-	}
-	if (!init) {
-		if (conp->vc_cols != pw + 1 || conp->vc_rows != ph + 1)
-			vc_resize(conp, pw + 1, ph + 1);
-	}
-}
-
-static void
-promcon_deinit(struct vc_data *conp)
-{
-	/* When closing the last console, reset video origin */
-	if (!--promcon_uni_pagedir[1])
-		con_free_unimap(conp);
-	conp->vc_uni_pagedir_loc = &conp->vc_uni_pagedir;
-	con_set_default_unimap(conp);
-}
-
-static int
-promcon_switch(struct vc_data *conp)
-{
-	return 1;
-}
-
-static unsigned short *
-promcon_repaint_line(unsigned short *s, unsigned char *buf, unsigned char **bp)
-{
-	int cnt = pw + 1;
-	int attr = -1;
-	unsigned char *b = *bp;
-
-	while (cnt--) {
-		u16 c = scr_readw(s);
-		if (attr != inverted(c)) {
-			attr = inverted(c);
-			if (attr) {
-				strcpy (b, "\033[7m");
-				b += 4;
-			} else {
-				strcpy (b, "\033[m");
-				b += 3;
-			}
-		}
-		*b++ = c;
-		s++;
-		if (b - buf >= 224) {
-			promcon_puts(buf, b - buf);
-			b = buf;
-		}
-	}
-	*bp = b;
-	return s;
-}
-
-static void
-promcon_putcs(struct vc_data *conp, const unsigned short *s,
-	      int count, int y, int x)
-{
-	unsigned char buf[256], *b = buf;
-	unsigned short attr = scr_readw(s);
-	unsigned char save;
-	int i, last = 0;
-
-	if (console_blanked)
-		return;
-	
-	if (count <= 0)
-		return;
-
-	b += promcon_start(conp, b);
-
-	if (x + count >= pw + 1) {
-		if (count == 1) {
-			x -= 1;
-			save = scr_readw((unsigned short *)(conp->vc_origin
-						   + y * conp->vc_size_row
-						   + (x << 1)));
-
-			if (px != x || py != y) {
-				b += sprintf(b, "\033[%d;%dH", y + 1, x + 1);
-				px = x;
-				py = y;
-			}
-
-			if (inverted(attr))
-				b += sprintf(b, "\033[7m%c\033[m", scr_readw(s++));
-			else
-				b += sprintf(b, "%c", scr_readw(s++));
-
-			strcpy(b, "\b\033[@");
-			b += 4;
-
-			if (inverted(save))
-				b += sprintf(b, "\033[7m%c\033[m", save);
-			else
-				b += sprintf(b, "%c", save);
-
-			px++;
-
-			b += promcon_end(conp, b);
-			promcon_puts(buf, b - buf);
-			return;
-		} else {
-			last = 1;
-			count = pw - x - 1;
-		}
-	}
-
-	if (inverted(attr)) {
-		strcpy(b, "\033[7m");
-		b += 4;
-	}
-
-	if (px != x || py != y) {
-		b += sprintf(b, "\033[%d;%dH", y + 1, x + 1);
-		px = x;
-		py = y;
-	}
-
-	for (i = 0; i < count; i++) {
-		if (b - buf >= 224) {
-			promcon_puts(buf, b - buf);
-			b = buf;
-		}
-		*b++ = scr_readw(s++);
-	}
-
-	px += count;
-
-	if (last) {
-		save = scr_readw(s++);
-		b += sprintf(b, "%c\b\033[@%c", scr_readw(s++), save);
-		px++;
-	}
-
-	if (inverted(attr)) {
-		strcpy(b, "\033[m");
-		b += 3;
-	}
-
-	b += promcon_end(conp, b);
-	promcon_puts(buf, b - buf);
-}
-
-static void
-promcon_putc(struct vc_data *conp, int c, int y, int x)
-{
-	unsigned short s;
-
-	if (console_blanked)
-		return;
-	
-	scr_writew(c, &s);
-	promcon_putcs(conp, &s, 1, y, x);
-}
-
-static void
-promcon_clear(struct vc_data *conp, int sy, int sx, int height, int width)
-{
-	unsigned char buf[256], *b = buf;
-	int i, j;
-
-	if (console_blanked)
-		return;
-	
-	b += promcon_start(conp, b);
-
-	if (!sx && width == pw + 1) {
-
-		if (!sy && height == ph + 1) {
-			strcpy(b, "\033[H\033[J");
-			b += 6;
-			b += promcon_end(conp, b);
-			promcon_puts(buf, b - buf);
-			return;
-		} else if (sy + height == ph + 1) {
-			b += sprintf(b, "\033[%dH\033[J", sy + 1);
-			b += promcon_end(conp, b);
-			promcon_puts(buf, b - buf);
-			return;
-		}
-
-		b += sprintf(b, "\033[%dH", sy + 1);
-		for (i = 1; i < height; i++) {
-			strcpy(b, "\033[K\n");
-			b += 4;
-		}
-
-		strcpy(b, "\033[K");
-		b += 3;
-
-		b += promcon_end(conp, b);
-		promcon_puts(buf, b - buf);
-		return;
-
-	} else if (sx + width == pw + 1) {
-
-		b += sprintf(b, "\033[%d;%dH", sy + 1, sx + 1);
-		for (i = 1; i < height; i++) {
-			strcpy(b, "\033[K\n");
-			b += 4;
-		}
-
-		strcpy(b, "\033[K");
-		b += 3;
-
-		b += promcon_end(conp, b);
-		promcon_puts(buf, b - buf);
-		return;
-	}
-
-	for (i = sy + 1; i <= sy + height; i++) {
-		b += sprintf(b, "\033[%d;%dH", i, sx + 1);
-		for (j = 0; j < width; j++)
-			*b++ = ' ';
-		if (b - buf + width >= 224) {
-			promcon_puts(buf, b - buf);
-			b = buf;
-		}
-	}
-
-	b += promcon_end(conp, b);
-	promcon_puts(buf, b - buf);
-}
-                        
-static void
-promcon_bmove(struct vc_data *conp, int sy, int sx, int dy, int dx,
-	      int height, int width)
-{
-	char buf[256], *b = buf;
-
-	if (console_blanked)
-		return;
-	
-	b += promcon_start(conp, b);
-	if (sy == dy && height == 1) {
-		if (dx > sx && dx + width == conp->vc_cols)
-			b += sprintf(b, "\033[%d;%dH\033[%d@\033[%d;%dH",
-				     sy + 1, sx + 1, dx - sx, py + 1, px + 1);
-		else if (dx < sx && sx + width == conp->vc_cols)
-			b += sprintf(b, "\033[%d;%dH\033[%dP\033[%d;%dH",
-				     dy + 1, dx + 1, sx - dx, py + 1, px + 1);
-
-		b += promcon_end(conp, b);
-		promcon_puts(buf, b - buf);
-		return;
-	}
-
-	/*
-	 * FIXME: What to do here???
-	 * Current console.c should not call it like that ever.
-	 */
-	prom_printf("\033[7mFIXME: bmove not handled\033[m\n");
-}
-
-static void
-promcon_cursor(struct vc_data *conp, int mode)
-{
-	char buf[32], *b = buf;
-
-	switch (mode) {
-	case CM_ERASE:
-		break;
-
-	case CM_MOVE:
-	case CM_DRAW:
-		b += promcon_start(conp, b);
-		if (px != conp->vc_x || py != conp->vc_y) {
-			px = conp->vc_x;
-			py = conp->vc_y;
-			b += sprintf(b, "\033[%d;%dH", py + 1, px + 1);
-		}
-		promcon_puts(buf, b - buf);
-		break;
-	}
-}
-
-static int
-promcon_blank(struct vc_data *conp, int blank, int mode_switch)
-{
-	if (blank) {
-		promcon_puts("\033[H\033[J\033[7m \033[m\b", 15);
-		return 0;
-	} else {
-		/* Let console.c redraw */
-		return 1;
-	}
-}
-
-static int
-promcon_scroll(struct vc_data *conp, int t, int b, int dir, int count)
-{
-	unsigned char buf[256], *p = buf;
-	unsigned short *s;
-	int i;
-
-	if (console_blanked)
-		return 0;
-	
-	p += promcon_start(conp, p);
-
-	switch (dir) {
-	case SM_UP:
-		if (b == ph + 1) {
-			p += sprintf(p, "\033[%dH\033[%dM", t + 1, count);
-			px = 0;
-			py = t;
-			p += promcon_end(conp, p);
-			promcon_puts(buf, p - buf);
-			break;
-		}
-
-		s = (unsigned short *)(conp->vc_origin
-				       + (t + count) * conp->vc_size_row);
-
-		p += sprintf(p, "\033[%dH", t + 1);
-
-		for (i = t; i < b - count; i++)
-			s = promcon_repaint_line(s, buf, &p);
-
-		for (; i < b - 1; i++) {
-			strcpy(p, "\033[K\n");
-			p += 4;
-			if (p - buf >= 224) {
-				promcon_puts(buf, p - buf);
-				p = buf;
-			}
-		}
-
-		strcpy(p, "\033[K");
-		p += 3;
-
-		p += promcon_end(conp, p);
-		promcon_puts(buf, p - buf);
-		break;
-
-	case SM_DOWN:
-		if (b == ph + 1) {
-			p += sprintf(p, "\033[%dH\033[%dL", t + 1, count);
-			px = 0;
-			py = t;
-			p += promcon_end(conp, p);
-			promcon_puts(buf, p - buf);
-			break;
-		}
-
-		s = (unsigned short *)(conp->vc_origin + t * conp->vc_size_row);
-
-		p += sprintf(p, "\033[%dH", t + 1);
-
-		for (i = t; i < t + count; i++) {
-			strcpy(p, "\033[K\n");
-			p += 4;
-			if (p - buf >= 224) {
-				promcon_puts(buf, p - buf);
-				p = buf;
-			}
-		}
-
-		for (; i < b; i++)
-			s = promcon_repaint_line(s, buf, &p);
-
-		p += promcon_end(conp, p);
-		promcon_puts(buf, p - buf);
-		break;
-	}
-
-	return 0;
-}
-
-#if !(PROMCON_COLOR)
-static u8 promcon_build_attr(struct vc_data *conp, u8 _color, u8 _intensity,
-    u8 _blink, u8 _underline, u8 _reverse, u8 _italic)
-{
-	return (_reverse) ? 0xf : 0x7;
-}
-#endif
-
-/*
- *  The console 'switch' structure for the VGA based console
- */
-
-static int promcon_dummy(void)
-{
-        return 0;
-}
-
-#define DUMMY (void *) promcon_dummy
-
-const struct consw prom_con = {
-	.owner =		THIS_MODULE,
-	.con_startup =		promcon_startup,
-	.con_init =		promcon_init,
-	.con_deinit =		promcon_deinit,
-	.con_clear =		promcon_clear,
-	.con_putc =		promcon_putc,
-	.con_putcs =		promcon_putcs,
-	.con_cursor =		promcon_cursor,
-	.con_scroll =		promcon_scroll,
-	.con_bmove =		promcon_bmove,
-	.con_switch =		promcon_switch,
-	.con_blank =		promcon_blank,
-	.con_set_palette =	DUMMY,
-	.con_scrolldelta =	DUMMY,
-#if !(PROMCON_COLOR)
-	.con_build_attr =	promcon_build_attr,
-#endif
-};
-
-void __init prom_con_init(void)
-{
-#ifdef CONFIG_DUMMY_CONSOLE
-	if (conswitchp == &dummy_con)
-		take_over_console(&prom_con, 0, MAX_NR_CONSOLES-1, 1);
-	else
-#endif
-	if (conswitchp == &prom_con)
-		promcon_init_unimap(vc_cons[fg_console].d);
-}
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 148cbcc39602..915439dc05a0 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable)
 	dispc_write_reg(DISPC_CONTROL, l);
 
 	/* Set bypass mode in RFBI module */
-	l = __raw_readl(IO_ADDRESS(RFBI_CONTROL));
+	l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL));
 	l |= enable ? 0 : (1 << 1);
-	__raw_writel(l, IO_ADDRESS(RFBI_CONTROL));
+	__raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL));
 }
 
 static void set_lcd_data_lines(int data_lines)
@@ -1421,7 +1421,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
 	}
 
 	/* L3 firewall setting: enable access to OCM RAM */
-	__raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
+	__raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
 
 	if ((r = alloc_palette_ram()) < 0)
 		goto fail2;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 07f22b625632..3ad5157f9899 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
@@ -22,35 +23,8 @@
 #include <asm/atomic.h>
 
 #define PALETTE_NR 16
-
-struct sh_mobile_lcdc_priv;
-struct sh_mobile_lcdc_chan {
-	struct sh_mobile_lcdc_priv *lcdc;
-	unsigned long *reg_offs;
-	unsigned long ldmt1r_value;
-	unsigned long enabled; /* ME and SE in LDCNT2R */
-	struct sh_mobile_lcdc_chan_cfg cfg;
-	u32 pseudo_palette[PALETTE_NR];
-	struct fb_info *info;
-	dma_addr_t dma_handle;
-	struct fb_deferred_io defio;
-	struct scatterlist *sglist;
-	unsigned long frame_end;
-	wait_queue_head_t frame_end_wait;
-};
-
-struct sh_mobile_lcdc_priv {
-	void __iomem *base;
-	int irq;
-#ifdef CONFIG_HAVE_CLK
-	atomic_t clk_usecnt;
-	struct clk *dot_clk;
-	struct clk *clk;
-#endif
-	unsigned long lddckr;
-	struct sh_mobile_lcdc_chan ch[2];
-	int started;
-};
+#define SIDE_B_OFFSET 0x1000
+#define MIRROR_OFFSET 0x2000
 
 /* shared registers */
 #define _LDDCKR 0x410
@@ -59,17 +33,30 @@ struct sh_mobile_lcdc_priv {
 #define _LDSR 0x46c
 #define _LDCNT1R 0x470
 #define _LDCNT2R 0x474
+#define _LDRCNTR 0x478
 #define _LDDDSR 0x47c
 #define _LDDWD0R 0x800
 #define _LDDRDR 0x840
 #define _LDDWAR 0x900
 #define _LDDRAR 0x904
 
+/* shared registers and their order for context save/restore */
+static int lcdc_shared_regs[] = {
+	_LDDCKR,
+	_LDDCKSTPR,
+	_LDINTR,
+	_LDDDSR,
+	_LDCNT1R,
+	_LDCNT2R,
+};
+#define NR_SHARED_REGS ARRAY_SIZE(lcdc_shared_regs)
+
 /* per-channel registers */
 enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
-       LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR };
+       LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
+       NR_CH_REGS };
 
-static unsigned long lcdc_offs_mainlcd[] = {
+static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
 	[LDDCKPAT1R] = 0x400,
 	[LDDCKPAT2R] = 0x404,
 	[LDMT1R] = 0x418,
@@ -87,7 +74,7 @@ static unsigned long lcdc_offs_mainlcd[] = {
 	[LDPMR] = 0x460,
 };
 
-static unsigned long lcdc_offs_sublcd[] = {
+static unsigned long lcdc_offs_sublcd[NR_CH_REGS] = {
 	[LDDCKPAT1R] = 0x408,
 	[LDDCKPAT2R] = 0x40c,
 	[LDMT1R] = 0x600,
@@ -110,12 +97,80 @@ static unsigned long lcdc_offs_sublcd[] = {
 #define DISPLAY_BEU	0x00000008
 #define LCDC_ENABLE	0x00000001
 #define LDINTR_FE	0x00000400
+#define LDINTR_VSE	0x00000200
+#define LDINTR_VEE	0x00000100
 #define LDINTR_FS	0x00000004
+#define LDINTR_VSS	0x00000002
+#define LDINTR_VES	0x00000001
+#define LDRCNTR_SRS	0x00020000
+#define LDRCNTR_SRC	0x00010000
+#define LDRCNTR_MRS	0x00000002
+#define LDRCNTR_MRC	0x00000001
+
+struct sh_mobile_lcdc_priv;
+struct sh_mobile_lcdc_chan {
+	struct sh_mobile_lcdc_priv *lcdc;
+	unsigned long *reg_offs;
+	unsigned long ldmt1r_value;
+	unsigned long enabled; /* ME and SE in LDCNT2R */
+	struct sh_mobile_lcdc_chan_cfg cfg;
+	u32 pseudo_palette[PALETTE_NR];
+	unsigned long saved_ch_regs[NR_CH_REGS];
+	struct fb_info *info;
+	dma_addr_t dma_handle;
+	struct fb_deferred_io defio;
+	struct scatterlist *sglist;
+	unsigned long frame_end;
+	unsigned long pan_offset;
+	unsigned long new_pan_offset;
+	wait_queue_head_t frame_end_wait;
+};
+
+struct sh_mobile_lcdc_priv {
+	void __iomem *base;
+	int irq;
+	atomic_t hw_usecnt;
+	struct device *dev;
+	struct clk *dot_clk;
+	unsigned long lddckr;
+	struct sh_mobile_lcdc_chan ch[2];
+	unsigned long saved_shared_regs[NR_SHARED_REGS];
+	int started;
+};
+
+static bool banked(int reg_nr)
+{
+	switch (reg_nr) {
+	case LDMT1R:
+	case LDMT2R:
+	case LDMT3R:
+	case LDDFR:
+	case LDSM1R:
+	case LDSA1R:
+	case LDMLSR:
+	case LDHCNR:
+	case LDHSYNR:
+	case LDVLNR:
+	case LDVSYNR:
+		return true;
+	}
+	return false;
+}
 
 static void lcdc_write_chan(struct sh_mobile_lcdc_chan *chan,
 			    int reg_nr, unsigned long data)
 {
 	iowrite32(data, chan->lcdc->base + chan->reg_offs[reg_nr]);
+	if (banked(reg_nr))
+		iowrite32(data, chan->lcdc->base + chan->reg_offs[reg_nr] +
+			  SIDE_B_OFFSET);
+}
+
+static void lcdc_write_chan_mirror(struct sh_mobile_lcdc_chan *chan,
+			    int reg_nr, unsigned long data)
+{
+	iowrite32(data, chan->lcdc->base + chan->reg_offs[reg_nr] +
+		  MIRROR_OFFSET);
 }
 
 static unsigned long lcdc_read_chan(struct sh_mobile_lcdc_chan *chan,
@@ -156,6 +211,7 @@ static void lcdc_sys_write_index(void *handle, unsigned long data)
 	lcdc_write(ch->lcdc, _LDDWD0R, data | 0x10000000);
 	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
 	lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
 }
 
 static void lcdc_sys_write_data(void *handle, unsigned long data)
@@ -165,6 +221,7 @@ static void lcdc_sys_write_data(void *handle, unsigned long data)
 	lcdc_write(ch->lcdc, _LDDWD0R, data | 0x11000000);
 	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
 	lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
 }
 
 static unsigned long lcdc_sys_read_data(void *handle)
@@ -175,8 +232,9 @@ static unsigned long lcdc_sys_read_data(void *handle)
 	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
 	lcdc_write(ch->lcdc, _LDDRAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
 	udelay(1);
+	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
 
-	return lcdc_read(ch->lcdc, _LDDRDR) & 0xffff;
+	return lcdc_read(ch->lcdc, _LDDRDR) & 0x3ffff;
 }
 
 struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = {
@@ -185,11 +243,10 @@ struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = {
 	lcdc_sys_read_data,
 };
 
-#ifdef CONFIG_HAVE_CLK
 static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
 {
-	if (atomic_inc_and_test(&priv->clk_usecnt)) {
-		clk_enable(priv->clk);
+	if (atomic_inc_and_test(&priv->hw_usecnt)) {
+		pm_runtime_get_sync(priv->dev);
 		if (priv->dot_clk)
 			clk_enable(priv->dot_clk);
 	}
@@ -197,16 +254,12 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
 
 static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
 {
-	if (atomic_sub_return(1, &priv->clk_usecnt) == -1) {
+	if (atomic_sub_return(1, &priv->hw_usecnt) == -1) {
 		if (priv->dot_clk)
 			clk_disable(priv->dot_clk);
-		clk_disable(priv->clk);
+		pm_runtime_put(priv->dev);
 	}
 }
-#else
-static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) {}
-static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {}
-#endif
 
 static int sh_mobile_lcdc_sginit(struct fb_info *info,
 				  struct list_head *pagelist)
@@ -255,30 +308,52 @@ static irqreturn_t sh_mobile_lcdc_irq(int irq, void *data)
 	struct sh_mobile_lcdc_priv *priv = data;
 	struct sh_mobile_lcdc_chan *ch;
 	unsigned long tmp;
+	unsigned long ldintr;
 	int is_sub;
 	int k;
 
 	/* acknowledge interrupt */
-	tmp = lcdc_read(priv, _LDINTR);
-	tmp &= 0xffffff00; /* mask in high 24 bits */
-	tmp |= 0x000000ff ^ LDINTR_FS; /* status in low 8 */
+	ldintr = tmp = lcdc_read(priv, _LDINTR);
+	/*
+	 * disable further VSYNC End IRQs, preserve all other enabled IRQs,
+	 * write 0 to bits 0-6 to ack all triggered IRQs.
+	 */
+	tmp &= 0xffffff00 & ~LDINTR_VEE;
 	lcdc_write(priv, _LDINTR, tmp);
 
 	/* figure out if this interrupt is for main or sub lcd */
 	is_sub = (lcdc_read(priv, _LDSR) & (1 << 10)) ? 1 : 0;
 
-	/* wake up channel and disable clocks*/
+	/* wake up channel and disable clocks */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
 		ch = &priv->ch[k];
 
 		if (!ch->enabled)
 			continue;
 
-		if (is_sub == lcdc_chan_is_sublcd(ch)) {
-			ch->frame_end = 1;
-			wake_up(&ch->frame_end_wait);
+		/* Frame Start */
+		if (ldintr & LDINTR_FS) {
+			if (is_sub == lcdc_chan_is_sublcd(ch)) {
+				ch->frame_end = 1;
+				wake_up(&ch->frame_end_wait);
 
-			sh_mobile_lcdc_clk_off(priv);
+				sh_mobile_lcdc_clk_off(priv);
+			}
+		}
+
+		/* VSYNC End */
+		if (ldintr & LDINTR_VES) {
+			unsigned long ldrcntr = lcdc_read(priv, _LDRCNTR);
+			/* Set the source address for the next refresh */
+			lcdc_write_chan_mirror(ch, LDSA1R, ch->dma_handle +
+					       ch->new_pan_offset);
+			if (lcdc_chan_is_sublcd(ch))
+				lcdc_write(ch->lcdc, _LDRCNTR,
+					   ldrcntr ^ LDRCNTR_SRS);
+			else
+				lcdc_write(ch->lcdc, _LDRCNTR,
+					   ldrcntr ^ LDRCNTR_MRS);
+			ch->pan_offset = ch->new_pan_offset;
 		}
 	}
 
@@ -520,7 +595,6 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 		board_cfg = &ch->cfg.board_cfg;
 		if (board_cfg->display_off)
 			board_cfg->display_off(board_cfg->board_data);
-
 	}
 
 	/* stop the lcdc */
@@ -579,9 +653,6 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
 				       int clock_source,
 				       struct sh_mobile_lcdc_priv *priv)
 {
-#ifdef CONFIG_HAVE_CLK
-	char clk_name[8];
-#endif
 	char *str;
 	int icksel;
 
@@ -595,25 +666,21 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
 
 	priv->lddckr = icksel << 16;
 
-#ifdef CONFIG_HAVE_CLK
-	atomic_set(&priv->clk_usecnt, -1);
-	snprintf(clk_name, sizeof(clk_name), "lcdc%d", pdev->id);
-	priv->clk = clk_get(&pdev->dev, clk_name);
-	if (IS_ERR(priv->clk)) {
-		dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
-		return PTR_ERR(priv->clk);
-	}
-	
 	if (str) {
 		priv->dot_clk = clk_get(&pdev->dev, str);
 		if (IS_ERR(priv->dot_clk)) {
 			dev_err(&pdev->dev, "cannot get dot clock %s\n", str);
-			clk_put(priv->clk);
 			return PTR_ERR(priv->dot_clk);
 		}
 	}
-#endif
-
+	atomic_set(&priv->hw_usecnt, -1);
+
+	/* Runtime PM support involves two step for this driver:
+	 * 1) Enable Runtime PM
+	 * 2) Force Runtime PM Resume since hardware is accessed from probe()
+	 */
+	pm_runtime_enable(priv->dev);
+	pm_runtime_resume(priv->dev);
 	return 0;
 }
 
@@ -646,6 +713,9 @@ static struct fb_fix_screeninfo sh_mobile_lcdc_fix  = {
 	.type =		FB_TYPE_PACKED_PIXELS,
 	.visual =	FB_VISUAL_TRUECOLOR,
 	.accel =	FB_ACCEL_NONE,
+	.xpanstep =	0,
+	.ypanstep =	1,
+	.ywrapstep =	0,
 };
 
 static void sh_mobile_lcdc_fillrect(struct fb_info *info,
@@ -669,13 +739,38 @@ static void sh_mobile_lcdc_imageblit(struct fb_info *info,
 	sh_mobile_lcdc_deferred_io_touch(info);
 }
 
+static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
+				     struct fb_info *info)
+{
+	struct sh_mobile_lcdc_chan *ch = info->par;
+
+	if (info->var.xoffset == var->xoffset &&
+	    info->var.yoffset == var->yoffset)
+		return 0;	/* No change, do nothing */
+
+	ch->new_pan_offset = (var->yoffset * info->fix.line_length) +
+		(var->xoffset * (info->var.bits_per_pixel / 8));
+
+	if (ch->new_pan_offset != ch->pan_offset) {
+		unsigned long ldintr;
+		ldintr = lcdc_read(ch->lcdc, _LDINTR);
+		ldintr |= LDINTR_VEE;
+		lcdc_write(ch->lcdc, _LDINTR, ldintr);
+		sh_mobile_lcdc_deferred_io_touch(info);
+	}
+
+	return 0;
+}
+
 static struct fb_ops sh_mobile_lcdc_ops = {
+	.owner          = THIS_MODULE,
 	.fb_setcolreg	= sh_mobile_lcdc_setcolreg,
 	.fb_read        = fb_sys_read,
 	.fb_write       = fb_sys_write,
 	.fb_fillrect	= sh_mobile_lcdc_fillrect,
 	.fb_copyarea	= sh_mobile_lcdc_copyarea,
 	.fb_imageblit	= sh_mobile_lcdc_imageblit,
+	.fb_pan_display = sh_mobile_fb_pan_display,
 };
 
 static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)
@@ -731,9 +826,59 @@ static int sh_mobile_lcdc_resume(struct device *dev)
 	return sh_mobile_lcdc_start(platform_get_drvdata(pdev));
 }
 
+static int sh_mobile_lcdc_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_mobile_lcdc_priv *p = platform_get_drvdata(pdev);
+	struct sh_mobile_lcdc_chan *ch;
+	int k, n;
+
+	/* save per-channel registers */
+	for (k = 0; k < ARRAY_SIZE(p->ch); k++) {
+		ch = &p->ch[k];
+		if (!ch->enabled)
+			continue;
+		for (n = 0; n < NR_CH_REGS; n++)
+			ch->saved_ch_regs[n] = lcdc_read_chan(ch, n);
+	}
+
+	/* save shared registers */
+	for (n = 0; n < NR_SHARED_REGS; n++)
+		p->saved_shared_regs[n] = lcdc_read(p, lcdc_shared_regs[n]);
+
+	/* turn off LCDC hardware */
+	lcdc_write(p, _LDCNT1R, 0);
+	return 0;
+}
+
+static int sh_mobile_lcdc_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_mobile_lcdc_priv *p = platform_get_drvdata(pdev);
+	struct sh_mobile_lcdc_chan *ch;
+	int k, n;
+
+	/* restore per-channel registers */
+	for (k = 0; k < ARRAY_SIZE(p->ch); k++) {
+		ch = &p->ch[k];
+		if (!ch->enabled)
+			continue;
+		for (n = 0; n < NR_CH_REGS; n++)
+			lcdc_write_chan(ch, n, ch->saved_ch_regs[n]);
+	}
+
+	/* restore shared registers */
+	for (n = 0; n < NR_SHARED_REGS; n++)
+		lcdc_write(p, lcdc_shared_regs[n], p->saved_shared_regs[n]);
+
+	return 0;
+}
+
 static struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
 	.suspend = sh_mobile_lcdc_suspend,
 	.resume = sh_mobile_lcdc_resume,
+	.runtime_suspend = sh_mobile_lcdc_runtime_suspend,
+	.runtime_resume = sh_mobile_lcdc_runtime_resume,
 };
 
 static int sh_mobile_lcdc_remove(struct platform_device *pdev);
@@ -778,6 +923,7 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 	}
 
 	priv->irq = i;
+	priv->dev = &pdev->dev;
 	platform_set_drvdata(pdev, priv);
 	pdata = pdev->dev.platform_data;
 
@@ -792,6 +938,8 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 			goto err1;
 		}
 		init_waitqueue_head(&priv->ch[i].frame_end_wait);
+		priv->ch[j].pan_offset = 0;
+		priv->ch[j].new_pan_offset = 0;
 
 		switch (pdata->ch[i].chan) {
 		case LCDC_CHAN_MAINLCD:
@@ -834,7 +982,9 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info = priv->ch[i].info;
 		info->fbops = &sh_mobile_lcdc_ops;
 		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
-		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
+		info->var.yres = cfg->lcd_cfg.yres;
+		/* Default Y virtual resolution is 2x panel size */
+		info->var.yres_virtual = info->var.yres * 2;
 		info->var.width = cfg->lcd_size_cfg.width;
 		info->var.height = cfg->lcd_size_cfg.height;
 		info->var.activate = FB_ACTIVATE_NOW;
@@ -844,7 +994,8 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 
 		info->fix = sh_mobile_lcdc_fix;
 		info->fix.line_length = cfg->lcd_cfg.xres * (cfg->bpp / 8);
-		info->fix.smem_len = info->fix.line_length * cfg->lcd_cfg.yres;
+		info->fix.smem_len = info->fix.line_length *
+			info->var.yres_virtual;
 
 		buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
 					 &priv->ch[i].dma_handle, GFP_KERNEL);
@@ -947,11 +1098,10 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 		framebuffer_release(info);
 	}
 
-#ifdef CONFIG_HAVE_CLK
 	if (priv->dot_clk)
 		clk_put(priv->dot_clk);
-	clk_put(priv->clk);
-#endif
+
+	pm_runtime_disable(priv->dev);
 
 	if (priv->base)
 		iounmap(priv->base);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b1ccc04f3c9a..ff3eb8ff6bd7 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,13 @@ config SOFT_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called softdog.
 
+config WM831X_WATCHDOG
+	tristate "WM831x watchdog"
+	depends on MFD_WM831X
+	help
+	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
+	  the watchdog triggers the system will be reset.
+
 config WM8350_WATCHDOG
 	tristate "WM8350 watchdog"
 	depends on MFD_WM8350
@@ -266,6 +273,15 @@ config STMP3XXX_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called stmp3xxx_wdt.
 
+config NUC900_WATCHDOG
+	tristate "Nuvoton NUC900 watchdog"
+	depends on ARCH_W90X900
+	help
+	  Say Y here if to include support for the watchdog timer
+	  for the Nuvoton NUC900 series SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called nuc900_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -369,6 +385,28 @@ config SC520_WDT
 	  You can compile this driver directly into the kernel, or use
 	  it as a module.  The module will be called sc520_wdt.
 
+config SBC_FITPC2_WATCHDOG
+	tristate "Compulab SBC-FITPC2 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the fit-PC2
+	  Single-board computer made by Compulab.
+
+	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
+	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
+
+	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
+	  so system will not be restarted while user in BIOS setup.
+
+	  Once watchdog was enabled the system will be restarted every
+	  "Watchdog Timer Value" period, so to prevent it user can restart or
+	  disable the watchdog.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc_fitpc2_wdt.
+
+	  Most people will say N.
+
 config EUROTECH_WDT
 	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
 	depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 3d774294a2b7..348b3b862c99 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
 obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
 obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
+obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@@ -64,6 +65,7 @@ obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
 obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
 obj-$(CONFIG_GEODE_WDT) += geodewdt.o
 obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
+obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o
 obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
 obj-$(CONFIG_IB700_WDT) += ib700wdt.o
 obj-$(CONFIG_IBMASR) += ibmasr.o
@@ -139,5 +141,6 @@ obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwd.o
 # XTENSA Architecture
 
 # Architecture Independant
+obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2f8643efe92c..2e94b71b20d9 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -28,9 +28,8 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
+#include <linux/platform_device.h>
 #include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
 #include <linux/fs.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
@@ -76,24 +75,10 @@ static unsigned expect_close;
 /* XXX currently fixed, allows max margin ~68.72 secs */
 #define prescale_value 0xffff
 
-/* Offset of the WDT registers */
-static unsigned long ar7_regs_wdt;
+/* Resource of the WDT registers */
+static struct resource *ar7_regs_wdt;
 /* Pointer to the remapped WDT IO space */
 static struct ar7_wdt *ar7_wdt;
-static void ar7_wdt_get_regs(void)
-{
-	u16 chip_id = ar7_chip_id();
-	switch (chip_id) {
-	case AR7_CHIP_7100:
-	case AR7_CHIP_7200:
-		ar7_regs_wdt = AR7_REGS_WDT;
-		break;
-	default:
-		ar7_regs_wdt = UR8_REGS_WDT;
-		break;
-	}
-}
-
 
 static void ar7_wdt_kick(u32 value)
 {
@@ -202,20 +187,6 @@ static int ar7_wdt_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int ar7_wdt_notify_sys(struct notifier_block *this,
-			      unsigned long code, void *unused)
-{
-	if (code == SYS_HALT || code == SYS_POWER_OFF)
-		if (!nowayout)
-			ar7_wdt_disable_wdt();
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block ar7_wdt_notifier = {
-	.notifier_call = ar7_wdt_notify_sys,
-};
-
 static ssize_t ar7_wdt_write(struct file *file, const char *data,
 			     size_t len, loff_t *ppos)
 {
@@ -299,56 +270,86 @@ static struct miscdevice ar7_wdt_miscdev = {
 	.fops		= &ar7_wdt_fops,
 };
 
-static int __init ar7_wdt_init(void)
+static int __devinit ar7_wdt_probe(struct platform_device *pdev)
 {
 	int rc;
 
 	spin_lock_init(&wdt_lock);
 
-	ar7_wdt_get_regs();
+	ar7_regs_wdt =
+		platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	if (!ar7_regs_wdt) {
+		printk(KERN_ERR DRVNAME ": could not get registers resource\n");
+		rc = -ENODEV;
+		goto out;
+	}
 
-	if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt),
-							LONGNAME)) {
+	if (!request_mem_region(ar7_regs_wdt->start,
+				resource_size(ar7_regs_wdt), LONGNAME)) {
 		printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n");
-		return -EBUSY;
+		rc = -EBUSY;
+		goto out;
 	}
 
-	ar7_wdt = (struct ar7_wdt *)
-			ioremap(ar7_regs_wdt, sizeof(struct ar7_wdt));
+	ar7_wdt = ioremap(ar7_regs_wdt->start, resource_size(ar7_regs_wdt));
+	if (!ar7_wdt) {
+		printk(KERN_ERR DRVNAME ": could not ioremap registers\n");
+		rc = -ENXIO;
+		goto out_mem_region;
+	}
 
 	ar7_wdt_disable_wdt();
 	ar7_wdt_prescale(prescale_value);
 	ar7_wdt_update_margin(margin);
 
-	rc = register_reboot_notifier(&ar7_wdt_notifier);
-	if (rc) {
-		printk(KERN_ERR DRVNAME
-			": unable to register reboot notifier\n");
-		goto out_alloc;
-	}
-
 	rc = misc_register(&ar7_wdt_miscdev);
 	if (rc) {
 		printk(KERN_ERR DRVNAME ": unable to register misc device\n");
-		goto out_register;
+		goto out_alloc;
 	}
 	goto out;
 
-out_register:
-	unregister_reboot_notifier(&ar7_wdt_notifier);
 out_alloc:
 	iounmap(ar7_wdt);
-	release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt));
+out_mem_region:
+	release_mem_region(ar7_regs_wdt->start, resource_size(ar7_regs_wdt));
 out:
 	return rc;
 }
 
-static void __exit ar7_wdt_cleanup(void)
+static int __devexit ar7_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&ar7_wdt_miscdev);
-	unregister_reboot_notifier(&ar7_wdt_notifier);
 	iounmap(ar7_wdt);
-	release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt));
+	release_mem_region(ar7_regs_wdt->start, resource_size(ar7_regs_wdt));
+
+	return 0;
+}
+
+static void ar7_wdt_shutdown(struct platform_device *pdev)
+{
+	if (!nowayout)
+		ar7_wdt_disable_wdt();
+}
+
+static struct platform_driver ar7_wdt_driver = {
+	.probe = ar7_wdt_probe,
+	.remove = __devexit_p(ar7_wdt_remove),
+	.shutdown = ar7_wdt_shutdown,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "ar7_wdt",
+	},
+};
+
+static int __init ar7_wdt_init(void)
+{
+	return platform_driver_register(&ar7_wdt_driver);
+}
+
+static void __exit ar7_wdt_cleanup(void)
+{
+	platform_driver_unregister(&ar7_wdt_driver);
 }
 
 module_init(ar7_wdt_init);
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 225398fd5049..e8380ef65c1c 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -22,6 +22,8 @@
 
 #include <asm/reg_booke.h>
 #include <asm/system.h>
+#include <asm/time.h>
+#include <asm/div64.h>
 
 /* If the kernel parameter wdt=1, the watchdog will be enabled at boot.
  * Also, the wdt_period sets the watchdog timer period timeout.
@@ -32,7 +34,7 @@
  */
 
 #ifdef	CONFIG_FSL_BOOKE
-#define WDT_PERIOD_DEFAULT 63	/* Ex. wdt_period=28 bus=333Mhz,reset=~40sec */
+#define WDT_PERIOD_DEFAULT 38	/* Ex. wdt_period=28 bus=333Mhz,reset=~40sec */
 #else
 #define WDT_PERIOD_DEFAULT 3	/* Refer to the PPC40x and PPC4xx manuals */
 #endif				/* for timing information */
@@ -41,7 +43,7 @@ u32 booke_wdt_enabled;
 u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
 
 #ifdef	CONFIG_FSL_BOOKE
-#define WDTP(x)		((((63-x)&0x3)<<30)|(((63-x)&0x3c)<<15))
+#define WDTP(x)		((((x)&0x3)<<30)|(((x)&0x3c)<<15))
 #define WDTP_MASK	(WDTP(0))
 #else
 #define WDTP(x)		(TCR_WP(x))
@@ -50,6 +52,45 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
 
 static DEFINE_SPINLOCK(booke_wdt_lock);
 
+/* For the specified period, determine the number of seconds
+ * corresponding to the reset time.  There will be a watchdog
+ * exception at approximately 3/5 of this time.
+ *
+ * The formula to calculate this is given by:
+ * 2.5 * (2^(63-period+1)) / timebase_freq
+ *
+ * In order to simplify things, we assume that period is
+ * at least 1.  This will still result in a very long timeout.
+ */
+static unsigned long long period_to_sec(unsigned int period)
+{
+	unsigned long long tmp = 1ULL << (64 - period);
+	unsigned long tmp2 = ppc_tb_freq;
+
+	/* tmp may be a very large number and we don't want to overflow,
+	 * so divide the timebase freq instead of multiplying tmp
+	 */
+	tmp2 = tmp2 / 5 * 2;
+
+	do_div(tmp, tmp2);
+	return tmp;
+}
+
+/*
+ * This procedure will find the highest period which will give a timeout
+ * greater than the one required. e.g. for a bus speed of 66666666 and
+ * and a parameter of 2 secs, then this procedure will return a value of 38.
+ */
+static unsigned int sec_to_period(unsigned int secs)
+{
+	unsigned int period;
+	for (period = 63; period > 0; period--) {
+		if (period_to_sec(period) >= secs)
+			return period;
+	}
+	return 0;
+}
+
 static void __booke_wdt_ping(void *data)
 {
 	mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
@@ -93,7 +134,7 @@ static long booke_wdt_ioctl(struct file *file,
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user(arg, &ident, sizeof(struct watchdog_info)))
+		if (copy_to_user((void *)arg, &ident, sizeof(ident)))
 			return -EFAULT;
 	case WDIOC_GETSTATUS:
 		return put_user(ident.options, p);
@@ -115,8 +156,16 @@ static long booke_wdt_ioctl(struct file *file,
 		booke_wdt_ping();
 		return 0;
 	case WDIOC_SETTIMEOUT:
-		if (get_user(booke_wdt_period, p))
+		if (get_user(tmp, p))
 			return -EFAULT;
+#ifdef	CONFIG_FSL_BOOKE
+		/* period of 1 gives the largest possible timeout */
+		if (tmp > period_to_sec(1))
+			return -EINVAL;
+		booke_wdt_period = sec_to_period(tmp);
+#else
+		booke_wdt_period = tmp;
+#endif
 		mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP_MASK) |
 						WDTP(booke_wdt_period));
 		return 0;
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index aec7cefdef21..381026c0bd7b 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -110,7 +110,7 @@ static void coh901327_enable(u16 timeout)
 	 * Wait 3 32 kHz cycles for it to take effect
 	 */
 	freq = clk_get_rate(clk);
-	delay_ns = (1000000000 + freq - 1) / freq; /* Freq to ns and round up */
+	delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */
 	delay_ns = 3 * delay_ns; /* Wait 3 cycles */
 	ndelay(delay_ns);
 	/* Enable the watchdog interrupt */
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 83e22e7ea4a2..9d7520fa9e9c 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -25,6 +25,7 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/device.h>
+#include <linux/clk.h>
 
 #define MODULE_NAME "DAVINCI-WDT: "
 
@@ -69,6 +70,7 @@ static unsigned long wdt_status;
 
 static struct resource	*wdt_mem;
 static void __iomem	*wdt_base;
+struct clk		*wdt_clk;
 
 static void wdt_service(void)
 {
@@ -86,6 +88,9 @@ static void wdt_enable(void)
 {
 	u32 tgcr;
 	u32 timer_margin;
+	unsigned long wdt_freq;
+
+	wdt_freq = clk_get_rate(wdt_clk);
 
 	spin_lock(&io_lock);
 
@@ -99,9 +104,9 @@ static void wdt_enable(void)
 	iowrite32(0, wdt_base + TIM12);
 	iowrite32(0, wdt_base + TIM34);
 	/* set timeout period */
-	timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) & 0xffffffff);
+	timer_margin = (((u64)heartbeat * wdt_freq) & 0xffffffff);
 	iowrite32(timer_margin, wdt_base + PRD12);
-	timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) >> 32);
+	timer_margin = (((u64)heartbeat * wdt_freq) >> 32);
 	iowrite32(timer_margin, wdt_base + PRD34);
 	/* enable run continuously */
 	iowrite32(ENAMODE12_PERIODIC, wdt_base + TCR);
@@ -199,6 +204,12 @@ static int __devinit davinci_wdt_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct device *dev = &pdev->dev;
 
+	wdt_clk = clk_get(dev, NULL);
+	if (WARN_ON(IS_ERR(wdt_clk)))
+		return PTR_ERR(wdt_clk);
+
+	clk_enable(wdt_clk);
+
 	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
 		heartbeat = DEFAULT_HEARTBEAT;
 
@@ -245,6 +256,10 @@ static int __devexit davinci_wdt_remove(struct platform_device *pdev)
 		kfree(wdt_mem);
 		wdt_mem = NULL;
 	}
+
+	clk_disable(wdt_clk);
+	clk_put(wdt_clk);
+
 	return 0;
 }
 
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index 0c9059676690..aef94789019f 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -139,7 +139,7 @@ static long iop_wdt_ioctl(struct file *file,
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &ident, sizeof ident))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			ret = -EFAULT;
 		else
 			ret = 0;
diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c
new file mode 100644
index 000000000000..adefe3a9d510
--- /dev/null
+++ b/drivers/watchdog/nuc900_wdt.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#define REG_WTCR		0x1c
+#define WTCLK			(0x01 << 10)
+#define WTE			(0x01 << 7)	/*wdt enable*/
+#define WTIS			(0x03 << 4)
+#define WTIF			(0x01 << 3)
+#define WTRF			(0x01 << 2)
+#define WTRE			(0x01 << 1)
+#define WTR			(0x01 << 0)
+/*
+ * The watchdog time interval can be calculated via following formula:
+ * WTIS		real time interval (formula)
+ * 0x00		((2^ 14 ) * ((external crystal freq) / 256))seconds
+ * 0x01		((2^ 16 ) * ((external crystal freq) / 256))seconds
+ * 0x02		((2^ 18 ) * ((external crystal freq) / 256))seconds
+ * 0x03		((2^ 20 ) * ((external crystal freq) / 256))seconds
+ *
+ * The external crystal freq is 15Mhz in the nuc900 evaluation board.
+ * So 0x00 = +-0.28 seconds, 0x01 = +-1.12 seconds, 0x02 = +-4.48 seconds,
+ * 0x03 = +- 16.92 seconds..
+ */
+#define WDT_HW_TIMEOUT		0x02
+#define WDT_TIMEOUT		(HZ/2)
+#define WDT_HEARTBEAT		15
+
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct nuc900_wdt {
+	struct resource  *res;
+	struct clk	 *wdt_clock;
+	struct platform_device *pdev;
+	void __iomem	 *wdt_base;
+	char		 expect_close;
+	struct timer_list timer;
+	spinlock_t       wdt_lock;
+	unsigned long next_heartbeat;
+};
+
+static unsigned long nuc900wdt_busy;
+struct nuc900_wdt *nuc900_wdt;
+
+static inline void nuc900_wdt_keepalive(void)
+{
+	unsigned int val;
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val |= (WTR | WTIF);
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+}
+
+static inline void nuc900_wdt_start(void)
+{
+	unsigned int val;
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val |= (WTRE | WTE | WTR | WTCLK | WTIF);
+	val &= ~WTIS;
+	val |= (WDT_HW_TIMEOUT << 0x04);
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+
+	nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
+	mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
+}
+
+static inline void nuc900_wdt_stop(void)
+{
+	unsigned int val;
+
+	del_timer(&nuc900_wdt->timer);
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val &= ~WTE;
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+}
+
+static inline void nuc900_wdt_ping(void)
+{
+	nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
+}
+
+static int nuc900_wdt_open(struct inode *inode, struct file *file)
+{
+
+	if (test_and_set_bit(0, &nuc900wdt_busy))
+		return -EBUSY;
+
+	nuc900_wdt_start();
+
+	return nonseekable_open(inode, file);
+}
+
+static int nuc900_wdt_close(struct inode *inode, struct file *file)
+{
+	if (nuc900_wdt->expect_close == 42)
+		nuc900_wdt_stop();
+	else {
+		dev_crit(&nuc900_wdt->pdev->dev,
+			"Unexpected close, not stopping watchdog!\n");
+		nuc900_wdt_ping();
+	}
+
+	nuc900_wdt->expect_close = 0;
+	clear_bit(0, &nuc900wdt_busy);
+	return 0;
+}
+
+static const struct watchdog_info nuc900_wdt_info = {
+	.identity	= "nuc900 watchdog",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
+};
+
+static long nuc900_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &nuc900_wdt_info,
+				sizeof(nuc900_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		nuc900_wdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		heartbeat = new_value;
+		nuc900_wdt_ping();
+
+		return put_user(new_value, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static ssize_t nuc900_wdt_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	if (!len)
+		return 0;
+
+	/* Scan for magic character */
+	if (!nowayout) {
+		size_t i;
+
+		nuc900_wdt->expect_close = 0;
+
+		for (i = 0; i < len; i++) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V') {
+				nuc900_wdt->expect_close = 42;
+				break;
+			}
+		}
+	}
+
+	nuc900_wdt_ping();
+	return len;
+}
+
+static void nuc900_wdt_timer_ping(unsigned long data)
+{
+	if (time_before(jiffies, nuc900_wdt->next_heartbeat)) {
+		nuc900_wdt_keepalive();
+		mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
+	} else
+		dev_warn(&nuc900_wdt->pdev->dev, "Will reset the machine !\n");
+}
+
+static const struct file_operations nuc900wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= nuc900_wdt_ioctl,
+	.open		= nuc900_wdt_open,
+	.release	= nuc900_wdt_close,
+	.write		= nuc900_wdt_write,
+};
+
+static struct miscdevice nuc900wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &nuc900wdt_fops,
+};
+
+static int __devinit nuc900wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	nuc900_wdt = kzalloc(sizeof(struct nuc900_wdt), GFP_KERNEL);
+	if (!nuc900_wdt)
+		return -ENOMEM;
+
+	nuc900_wdt->pdev = pdev;
+
+	spin_lock_init(&nuc900_wdt->wdt_lock);
+
+	nuc900_wdt->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (nuc900_wdt->res == NULL) {
+		dev_err(&pdev->dev, "no memory resource specified\n");
+		ret = -ENOENT;
+		goto err_get;
+	}
+
+	if (!request_mem_region(nuc900_wdt->res->start,
+				resource_size(nuc900_wdt->res), pdev->name)) {
+		dev_err(&pdev->dev, "failed to get memory region\n");
+		ret = -ENOENT;
+		goto err_get;
+	}
+
+	nuc900_wdt->wdt_base = ioremap(nuc900_wdt->res->start,
+					resource_size(nuc900_wdt->res));
+	if (nuc900_wdt->wdt_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() region\n");
+		ret = -EINVAL;
+		goto err_req;
+	}
+
+	nuc900_wdt->wdt_clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(nuc900_wdt->wdt_clock)) {
+		dev_err(&pdev->dev, "failed to find watchdog clock source\n");
+		ret = PTR_ERR(nuc900_wdt->wdt_clock);
+		goto err_map;
+	}
+
+	clk_enable(nuc900_wdt->wdt_clock);
+
+	setup_timer(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0);
+
+	if (misc_register(&nuc900wdt_miscdev)) {
+		dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n",
+			WATCHDOG_MINOR, ret);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	clk_disable(nuc900_wdt->wdt_clock);
+	clk_put(nuc900_wdt->wdt_clock);
+err_map:
+	iounmap(nuc900_wdt->wdt_base);
+err_req:
+	release_mem_region(nuc900_wdt->res->start,
+					resource_size(nuc900_wdt->res));
+err_get:
+	kfree(nuc900_wdt);
+	return ret;
+}
+
+static int __devexit nuc900wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&nuc900wdt_miscdev);
+
+	clk_disable(nuc900_wdt->wdt_clock);
+	clk_put(nuc900_wdt->wdt_clock);
+
+	iounmap(nuc900_wdt->wdt_base);
+
+	release_mem_region(nuc900_wdt->res->start,
+					resource_size(nuc900_wdt->res));
+
+	kfree(nuc900_wdt);
+
+	return 0;
+}
+
+static struct platform_driver nuc900wdt_driver = {
+	.probe		= nuc900wdt_probe,
+	.remove		= __devexit_p(nuc900wdt_remove),
+	.driver		= {
+		.name	= "nuc900-wdt",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init nuc900_wdt_init(void)
+{
+	return platform_driver_register(&nuc900wdt_driver);
+}
+
+static void __exit nuc900_wdt_exit(void)
+{
+	platform_driver_unregister(&nuc900wdt_driver);
+}
+
+module_init(nuc900_wdt_init);
+module_exit(nuc900_wdt_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("Watchdog driver for NUC900");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:nuc900-wdt");
diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c
index 2e4442642262..bb66958b9433 100644
--- a/drivers/watchdog/rm9k_wdt.c
+++ b/drivers/watchdog/rm9k_wdt.c
@@ -340,7 +340,7 @@ static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
 					const char *name, unsigned int type)
 {
 	char buf[80];
-	if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
+	if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf))
 		return NULL;
 	return platform_get_resource_byname(pdv, type, buf);
 }
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
new file mode 100644
index 000000000000..852ca1977917
--- /dev/null
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -0,0 +1,267 @@
+/*
+ * Watchdog driver for SBC-FITPC2 board
+ *
+ * Author: Denis Turischev <denis@compulab.co.il>
+ *
+ * Adapted from the IXP2000 watchdog driver by Deepak Saxena.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME " WATCHDOG: " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/system.h>
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int margin = 60;	/* (secs) Default is 1 minute */
+static unsigned long wdt_status;
+static DEFINE_SPINLOCK(wdt_lock);
+
+#define WDT_IN_USE		0
+#define WDT_OK_TO_CLOSE		1
+
+#define COMMAND_PORT		0x4c
+#define DATA_PORT		0x48
+
+#define IFACE_ON_COMMAND	1
+#define REBOOT_COMMAND		2
+
+#define WATCHDOG_NAME 		"SBC-FITPC2 Watchdog"
+
+static void wdt_send_data(unsigned char command, unsigned char data)
+{
+	outb(command, COMMAND_PORT);
+	mdelay(100);
+	outb(data, DATA_PORT);
+	mdelay(200);
+}
+
+static void wdt_enable(void)
+{
+	spin_lock(&wdt_lock);
+	wdt_send_data(IFACE_ON_COMMAND, 1);
+	wdt_send_data(REBOOT_COMMAND, margin);
+	spin_unlock(&wdt_lock);
+}
+
+static void wdt_disable(void)
+{
+	spin_lock(&wdt_lock);
+	wdt_send_data(IFACE_ON_COMMAND, 0);
+	wdt_send_data(REBOOT_COMMAND, 0);
+	spin_unlock(&wdt_lock);
+}
+
+static int fitpc2_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t fitpc2_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
+{
+	size_t i;
+
+	if (!len)
+		return 0;
+
+	if (nowayout) {
+		len = 0;
+		goto out;
+	}
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	for (i = 0; i != len; i++) {
+		char c;
+
+		if (get_user(c, data + i))
+			return -EFAULT;
+
+		if (c == 'V')
+			set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+	}
+
+out:
+	wdt_enable();
+
+	return len;
+}
+
+
+static struct watchdog_info ident = {
+	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
+				WDIOF_KEEPALIVEPING,
+	.identity	= WATCHDOG_NAME,
+};
+
+
+static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int ret = -ENOTTY;
+	int time;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, (int *)arg);
+		if (ret)
+			break;
+
+		if (time < 31 || time > 255) {
+			ret = -EINVAL;
+			break;
+		}
+
+		margin = time;
+		wdt_enable();
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(margin, (int *)arg);
+		break;
+	}
+
+	return ret;
+}
+
+static int fitpc2_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+		wdt_disable();
+		pr_info("Device disabled\n");
+	} else {
+		pr_warning("Device closed unexpectedly -"
+			" timer will not stop\n");
+		wdt_enable();
+	}
+
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+
+static const struct file_operations fitpc2_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= fitpc2_wdt_write,
+	.unlocked_ioctl	= fitpc2_wdt_ioctl,
+	.open		= fitpc2_wdt_open,
+	.release	= fitpc2_wdt_release,
+};
+
+static struct miscdevice fitpc2_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &fitpc2_wdt_fops,
+};
+
+static int __init fitpc2_wdt_init(void)
+{
+	int err;
+
+	if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) {
+		pr_info("board name is: %s. Should be SBC-FITPC2\n",
+			dmi_get_system_info(DMI_BOARD_NAME));
+		return -ENODEV;
+	}
+
+	if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);
+		return -EIO;
+	}
+
+	if (!request_region(DATA_PORT, 1, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n", DATA_PORT);
+		err = -EIO;
+		goto err_data_port;
+	}
+
+	if (margin < 31 || margin > 255) {
+		pr_err("margin must be in range 31 - 255"
+		       " seconds, you tried to set %d\n", margin);
+		err = -EINVAL;
+		goto err_margin;
+	}
+
+	err = misc_register(&fitpc2_wdt_miscdev);
+	if (!err) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, err);
+		goto err_margin;
+	}
+
+	return 0;
+
+err_margin:
+	release_region(DATA_PORT, 1);
+err_data_port:
+	release_region(COMMAND_PORT, 1);
+
+	return err;
+}
+
+static void __exit fitpc2_wdt_exit(void)
+{
+	misc_deregister(&fitpc2_wdt_miscdev);
+	release_region(DATA_PORT, 1);
+	release_region(COMMAND_PORT, 1);
+}
+
+module_init(fitpc2_wdt_init);
+module_exit(fitpc2_wdt_exit);
+
+MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
+MODULE_DESCRIPTION("SBC-FITPC2 Watchdog");
+
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
index b5e19c1820a2..c01daca8405a 100644
--- a/drivers/watchdog/sc1200wdt.c
+++ b/drivers/watchdog/sc1200wdt.c
@@ -197,7 +197,7 @@ static long sc1200wdt_ioctl(struct file *file, unsigned int cmd,
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &ident, sizeof ident))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		return 0;
 
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index 7a1bdc7c95a9..f368dd87083a 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -80,7 +80,7 @@ static unsigned long open_lock;
 static DEFINE_SPINLOCK(wdtpci_lock);
 static char expect_close;
 
-static int io;
+static resource_size_t io;
 static int irq;
 
 /* Default timeout */
@@ -647,14 +647,15 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
 		goto out_pci;
 	}
 
-	irq = dev->irq;
-	io = pci_resource_start(dev, 2);
-
-	if (request_region(io, 16, "wdt_pci") == NULL) {
-		printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io);
+	if (pci_request_region(dev, 2, "wdt_pci")) {
+		printk(KERN_ERR PFX "I/O address 0x%llx already in use\n",
+			(unsigned long long)pci_resource_start(dev, 2));
 		goto out_pci;
 	}
 
+	irq = dev->irq;
+	io = pci_resource_start(dev, 2);
+
 	if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
 			 "wdt_pci", &wdtpci_miscdev)) {
 		printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
@@ -662,8 +663,8 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
 	}
 
 	printk(KERN_INFO
-	 "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n",
-								io, irq);
+	 "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n",
+					(unsigned long long)io, irq);
 
 	/* Check that the heartbeat value is within its range;
 	   if not reset to the default */
@@ -717,7 +718,7 @@ out_rbt:
 out_irq:
 	free_irq(irq, &wdtpci_miscdev);
 out_reg:
-	release_region(io, 16);
+	pci_release_region(dev, 2);
 out_pci:
 	pci_disable_device(dev);
 	goto out;
@@ -733,7 +734,7 @@ static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
 		misc_deregister(&temp_miscdev);
 	unregister_reboot_notifier(&wdtpci_notifier);
 	free_irq(irq, &wdtpci_miscdev);
-	release_region(io, 16);
+	pci_release_region(pdev, 2);
 	pci_disable_device(pdev);
 	dev_count--;
 }
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
new file mode 100644
index 000000000000..775bcd807f31
--- /dev/null
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -0,0 +1,441 @@
+/*
+ * Watchdog driver for the wm831x PMICs
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/watchdog.h>
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned long wm831x_wdt_users;
+static struct miscdevice wm831x_wdt_miscdev;
+static int wm831x_wdt_expect_close;
+static DEFINE_MUTEX(wdt_mutex);
+static struct wm831x *wm831x;
+static unsigned int update_gpio;
+static unsigned int update_state;
+
+/* We can't use the sub-second values here but they're included
+ * for completeness.  */
+static struct {
+	int time;  /* Seconds */
+	u16 val;   /* WDOG_TO value */
+} wm831x_wdt_cfgs[] = {
+	{  1, 2 },
+	{  2, 3 },
+	{  4, 4 },
+	{  8, 5 },
+	{ 16, 6 },
+	{ 32, 7 },
+	{ 33, 7 },  /* Actually 32.768s so include both, others round down */
+};
+
+static int wm831x_wdt_set_timeout(struct wm831x *wm831x, u16 value)
+{
+	int ret;
+
+	mutex_lock(&wdt_mutex);
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+				      WM831X_WDOG_TO_MASK, value);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+	mutex_unlock(&wdt_mutex);
+
+	return ret;
+}
+
+static int wm831x_wdt_start(struct wm831x *wm831x)
+{
+	int ret;
+
+	mutex_lock(&wdt_mutex);
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+				      WM831X_WDOG_ENA, WM831X_WDOG_ENA);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+	mutex_unlock(&wdt_mutex);
+
+	return ret;
+}
+
+static int wm831x_wdt_stop(struct wm831x *wm831x)
+{
+	int ret;
+
+	mutex_lock(&wdt_mutex);
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+				      WM831X_WDOG_ENA, 0);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+	mutex_unlock(&wdt_mutex);
+
+	return ret;
+}
+
+static int wm831x_wdt_kick(struct wm831x *wm831x)
+{
+	int ret;
+	u16 reg;
+
+	mutex_lock(&wdt_mutex);
+
+	if (update_gpio) {
+		gpio_set_value_cansleep(update_gpio, update_state);
+		update_state = !update_state;
+		ret = 0;
+		goto out;
+	}
+
+
+	reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+
+	if (!(reg & WM831X_WDOG_RST_SRC)) {
+		dev_err(wm831x->dev, "Hardware watchdog update unsupported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg |= WM831X_WDOG_RESET;
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+out:
+	mutex_unlock(&wdt_mutex);
+
+	return ret;
+}
+
+static int wm831x_wdt_open(struct inode *inode, struct file *file)
+{
+	int ret;
+
+	if (!wm831x)
+		return -ENODEV;
+
+	if (test_and_set_bit(0, &wm831x_wdt_users))
+		return -EBUSY;
+
+	ret = wm831x_wdt_start(wm831x);
+	if (ret != 0)
+		return ret;
+
+	return nonseekable_open(inode, file);
+}
+
+static int wm831x_wdt_release(struct inode *inode, struct file *file)
+{
+	if (wm831x_wdt_expect_close)
+		wm831x_wdt_stop(wm831x);
+	else {
+		dev_warn(wm831x->dev, "Watchdog device closed uncleanly\n");
+		wm831x_wdt_kick(wm831x);
+	}
+
+	clear_bit(0, &wm831x_wdt_users);
+
+	return 0;
+}
+
+static ssize_t wm831x_wdt_write(struct file *file,
+				const char __user *data, size_t count,
+				loff_t *ppos)
+{
+	size_t i;
+
+	if (count) {
+		wm831x_wdt_kick(wm831x);
+
+		if (!nowayout) {
+			/* In case it was set long ago */
+			wm831x_wdt_expect_close = 0;
+
+			/* scan to see whether or not we got the magic
+			   character */
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					wm831x_wdt_expect_close = 42;
+			}
+		}
+	}
+	return count;
+}
+
+static struct watchdog_info ident = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "WM831x Watchdog",
+};
+
+static long wm831x_wdt_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	int ret = -ENOTTY, time, i;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	u16 reg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, p);
+		break;
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		ret = -EINVAL;
+
+		/* Setting both simultaneously means at least one must fail */
+		if (options == WDIOS_DISABLECARD)
+			ret = wm831x_wdt_start(wm831x);
+
+		if (options == WDIOS_ENABLECARD)
+			ret = wm831x_wdt_stop(wm831x);
+		break;
+	}
+
+	case WDIOC_KEEPALIVE:
+		ret = wm831x_wdt_kick(wm831x);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, p);
+		if (ret)
+			break;
+
+		if (time == 0) {
+			if (nowayout)
+				ret = -EINVAL;
+			else
+				wm831x_wdt_stop(wm831x);
+			break;
+		}
+
+		for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+			if (wm831x_wdt_cfgs[i].time == time)
+				break;
+		if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+			ret = -EINVAL;
+		else
+			ret = wm831x_wdt_set_timeout(wm831x,
+						     wm831x_wdt_cfgs[i].val);
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+		reg &= WM831X_WDOG_TO_MASK;
+		for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+			if (wm831x_wdt_cfgs[i].val == reg)
+				break;
+		if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) {
+			dev_warn(wm831x->dev,
+				 "Unknown watchdog configuration: %x\n", reg);
+			ret = -EINVAL;
+		} else
+			ret = put_user(wm831x_wdt_cfgs[i].time, p);
+
+	}
+
+	return ret;
+}
+
+static const struct file_operations wm831x_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = wm831x_wdt_write,
+	.unlocked_ioctl = wm831x_wdt_ioctl,
+	.open = wm831x_wdt_open,
+	.release = wm831x_wdt_release,
+};
+
+static struct miscdevice wm831x_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &wm831x_wdt_fops,
+};
+
+static int __devinit wm831x_wdt_probe(struct platform_device *pdev)
+{
+	struct wm831x_pdata *chip_pdata;
+	struct wm831x_watchdog_pdata *pdata;
+	int reg, ret;
+
+	wm831x = dev_get_drvdata(pdev->dev.parent);
+
+	ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read watchdog status: %d\n",
+			ret);
+		goto err;
+	}
+	reg = ret;
+
+	if (reg & WM831X_WDOG_DEBUG)
+		dev_warn(wm831x->dev, "Watchdog is paused\n");
+
+	/* Apply any configuration */
+	if (pdev->dev.parent->platform_data) {
+		chip_pdata = pdev->dev.parent->platform_data;
+		pdata = chip_pdata->watchdog;
+	} else {
+		pdata = NULL;
+	}
+
+	if (pdata) {
+		reg &= ~(WM831X_WDOG_SECACT_MASK | WM831X_WDOG_PRIMACT_MASK |
+			 WM831X_WDOG_RST_SRC);
+
+		reg |= pdata->primary << WM831X_WDOG_PRIMACT_SHIFT;
+		reg |= pdata->secondary << WM831X_WDOG_SECACT_SHIFT;
+		reg |= pdata->software << WM831X_WDOG_RST_SRC_SHIFT;
+
+		if (pdata->update_gpio) {
+			ret = gpio_request(pdata->update_gpio,
+					   "Watchdog update");
+			if (ret < 0) {
+				dev_err(wm831x->dev,
+					"Failed to request update GPIO: %d\n",
+					ret);
+				goto err;
+			}
+
+			ret = gpio_direction_output(pdata->update_gpio, 0);
+			if (ret != 0) {
+				dev_err(wm831x->dev,
+					"gpio_direction_output returned: %d\n",
+					ret);
+				goto err_gpio;
+			}
+
+			update_gpio = pdata->update_gpio;
+
+			/* Make sure the watchdog takes hardware updates */
+			reg |= WM831X_WDOG_RST_SRC;
+		}
+
+		ret = wm831x_reg_unlock(wm831x);
+		if (ret == 0) {
+			ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
+			wm831x_reg_lock(wm831x);
+		} else {
+			dev_err(wm831x->dev,
+				"Failed to unlock security key: %d\n", ret);
+			goto err_gpio;
+		}
+	}
+
+	wm831x_wdt_miscdev.parent = &pdev->dev;
+
+	ret = misc_register(&wm831x_wdt_miscdev);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to register miscdev: %d\n", ret);
+		goto err_gpio;
+	}
+
+	return 0;
+
+err_gpio:
+	if (update_gpio) {
+		gpio_free(update_gpio);
+		update_gpio = 0;
+	}
+err:
+	return ret;
+}
+
+static int __devexit wm831x_wdt_remove(struct platform_device *pdev)
+{
+	if (update_gpio) {
+		gpio_free(update_gpio);
+		update_gpio = 0;
+	}
+
+	misc_deregister(&wm831x_wdt_miscdev);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_wdt_driver = {
+	.probe = wm831x_wdt_probe,
+	.remove = __devexit_p(wm831x_wdt_remove),
+	.driver = {
+		.name = "wm831x-watchdog",
+	},
+};
+
+static int __init wm831x_wdt_init(void)
+{
+	return platform_driver_register(&wm831x_wdt_driver);
+}
+module_init(wm831x_wdt_init);
+
+static void __exit wm831x_wdt_exit(void)
+{
+	platform_driver_unregister(&wm831x_wdt_driver);
+}
+module_exit(wm831x_wdt_exit);
+
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-watchdog");
diff --git a/firmware/Makefile b/firmware/Makefile
index 878329cf4825..ffe2663d49f2 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -51,9 +51,10 @@ fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
 fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
 			     e100/d102e_ucode.bin
 fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
-fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
+fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis
 fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
 fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
+fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis
 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
 fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 				      advansys/3550.bin advansys/38C0800.bin
diff --git a/firmware/WHENCE b/firmware/WHENCE
index d9e3a94cb4df..82db5256a4e5 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -596,6 +596,7 @@ Found in hex form in kernel source.
 Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter
 
 File: cis/LA-PCM.cis
+      cis/PCMLM28.cis
 
 Licence: GPL
 
@@ -623,6 +624,17 @@ Originally developed by the pcmcia-cs project
 
 --------------------------------------------------------------------------
 
+Driver: SERIAL_8250_CS - Serial PCMCIA adapter
+
+File: cis/MT5634ZLX.cis
+      cis/RS-COM-2P.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
 Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA
 
 File: ositech/Xilinx7OD.bin
diff --git a/firmware/cis/MT5634ZLX.cis.ihex b/firmware/cis/MT5634ZLX.cis.ihex
new file mode 100644
index 000000000000..72500b9d95d8
--- /dev/null
+++ b/firmware/cis/MT5634ZLX.cis.ihex
@@ -0,0 +1,11 @@
+:100000000101FF152204014D756C74695465636824
+:100010000050434D4349412035364B2044617461C3
+:10002000466178000000FF20040002010021020266
+:10003000001A05012780FF671B0FCF418B01550177
+:10004000550155AA60F80307281B08970108AA6004
+:10005000F802071B089F0108AA60E803071B08A70E
+:0B0060000108AA60E802071400FF007E
+:00000001FF
+#
+# Replacement CIS for Multitech MT5634ZLX modems
+#
diff --git a/firmware/cis/PCMLM28.cis.ihex b/firmware/cis/PCMLM28.cis.ihex
new file mode 100644
index 000000000000..ffdfe8522ef5
--- /dev/null
+++ b/firmware/cis/PCMLM28.cis.ihex
@@ -0,0 +1,18 @@
+:1000000001030000FF151504014C494E4B53595391
+:100010000050434D4C4D3238000000FF2004430196
+:10002000ABC0210200001A05012FF803031B10E4E6
+:1000300001190155E06100031FF8020730FFFF1BA3
+:100040000BA50108E06120031FF802071B0BA601A6
+:1000500008E06140031FF802071B0BA70108E061DD
+:1000600060031FF802071B0BA80108E06100031FD3
+:10007000E803071B0BA90108E06120031FE8030741
+:100080001B0BAA0108E06140031FE803071B0BAB31
+:100090000108E06160031FE803071B0BAC0108E0E7
+:1000A0006100031FE802071B0BAD0108E06120039C
+:1000B0001FE802071B0BAE0108E06140031FE802C6
+:1000C000071B0BAF0108E06160031FE80207140083
+:0200D000FF002F
+:00000001FF
+#
+# The on-card CIS says it is MFC-compliant, but it is not
+#
diff --git a/firmware/cis/RS-COM-2P.cis.ihex b/firmware/cis/RS-COM-2P.cis.ihex
new file mode 100644
index 000000000000..0801ca5da80a
--- /dev/null
+++ b/firmware/cis/RS-COM-2P.cis.ihex
@@ -0,0 +1,10 @@
+:1000000001030000FF1516040150434D4349410010
+:1000100052532D434F4D203250000000FF21020269
+:10002000011A0501030001011B0EC18118AA61E834
+:100030000307E8020730B89E1B0B820108AA615033
+:1000400002075802071B0B830108AA6160020768B8
+:0600500002071400FF008E
+:00000001FF
+#
+# Replacement CIS for dual-serial-port IO card
+#
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 618a60f03886..240cef14fe58 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -106,6 +106,7 @@ struct connection {
 #define CF_CONNECT_PENDING 3
 #define CF_INIT_PENDING 4
 #define CF_IS_OTHERCON 5
+#define CF_CLOSE 6
 	struct list_head writequeue;  /* List of outgoing writequeue_entries */
 	spinlock_t writequeue_lock;
 	int (*rx_action) (struct connection *);	/* What to do when active */
@@ -299,6 +300,8 @@ static void lowcomms_write_space(struct sock *sk)
 
 static inline void lowcomms_connect_sock(struct connection *con)
 {
+	if (test_bit(CF_CLOSE, &con->flags))
+		return;
 	if (!test_and_set_bit(CF_CONNECT_PENDING, &con->flags))
 		queue_work(send_workqueue, &con->swork);
 }
@@ -926,10 +929,8 @@ static void tcp_connect_to_sock(struct connection *con)
 		goto out_err;
 
 	memset(&saddr, 0, sizeof(saddr));
-	if (dlm_nodeid_to_addr(con->nodeid, &saddr)) {
-		sock_release(sock);
+	if (dlm_nodeid_to_addr(con->nodeid, &saddr))
 		goto out_err;
-	}
 
 	sock->sk->sk_user_data = con;
 	con->rx_action = receive_from_sock;
@@ -1284,7 +1285,6 @@ out:
 static void send_to_sock(struct connection *con)
 {
 	int ret = 0;
-	ssize_t(*sendpage) (struct socket *, struct page *, int, size_t, int);
 	const int msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL;
 	struct writequeue_entry *e;
 	int len, offset;
@@ -1293,8 +1293,6 @@ static void send_to_sock(struct connection *con)
 	if (con->sock == NULL)
 		goto out_connect;
 
-	sendpage = con->sock->ops->sendpage;
-
 	spin_lock(&con->writequeue_lock);
 	for (;;) {
 		e = list_entry(con->writequeue.next, struct writequeue_entry,
@@ -1309,8 +1307,8 @@ static void send_to_sock(struct connection *con)
 
 		ret = 0;
 		if (len) {
-			ret = sendpage(con->sock, e->page, offset, len,
-				       msg_flags);
+			ret = kernel_sendpage(con->sock, e->page, offset, len,
+					      msg_flags);
 			if (ret == -EAGAIN || ret == 0) {
 				cond_resched();
 				goto out;
@@ -1370,6 +1368,13 @@ int dlm_lowcomms_close(int nodeid)
 	log_print("closing connection to node %d", nodeid);
 	con = nodeid2con(nodeid, 0);
 	if (con) {
+		clear_bit(CF_CONNECT_PENDING, &con->flags);
+		clear_bit(CF_WRITE_PENDING, &con->flags);
+		set_bit(CF_CLOSE, &con->flags);
+		if (cancel_work_sync(&con->swork))
+			log_print("canceled swork for node %d", nodeid);
+		if (cancel_work_sync(&con->rwork))
+			log_print("canceled rwork for node %d", nodeid);
 		clean_one_writequeue(con);
 		close_connection(con, true);
 	}
@@ -1395,9 +1400,10 @@ static void process_send_sockets(struct work_struct *work)
 
 	if (test_and_clear_bit(CF_CONNECT_PENDING, &con->flags)) {
 		con->connect_action(con);
+		set_bit(CF_WRITE_PENDING, &con->flags);
 	}
-	clear_bit(CF_WRITE_PENDING, &con->flags);
-	send_to_sock(con);
+	if (test_and_clear_bit(CF_WRITE_PENDING, &con->flags))
+		send_to_sock(con);
 }
 
 
diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c
index d33634119e17..451d166bbe93 100644
--- a/fs/ext3/fsync.c
+++ b/fs/ext3/fsync.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/time.h>
+#include <linux/blkdev.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
 #include <linux/writeback.h>
@@ -73,7 +74,7 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
 	}
 
 	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
-		goto out;
+		goto flush;
 
 	/*
 	 * The VFS has written the file data.  If the inode is unaltered
@@ -85,7 +86,16 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
 			.nr_to_write = 0, /* sys_fsync did this */
 		};
 		ret = sync_inode(inode, &wbc);
+		goto out;
 	}
+flush:
+	/*
+	 * In case we didn't commit a transaction, we have to flush
+	 * disk caches manually so that data really is on persistent
+	 * storage
+	 */
+	if (test_opt(inode->i_sb, BARRIER))
+		blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
 out:
 	return ret;
 }
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index b49908a167ae..cd098a7b77fc 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -172,10 +172,21 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode)
  * so before we call here everything must be consistently dirtied against
  * this transaction.
  */
-static int ext3_journal_test_restart(handle_t *handle, struct inode *inode)
+static int truncate_restart_transaction(handle_t *handle, struct inode *inode)
 {
+	int ret;
+
 	jbd_debug(2, "restarting handle %p\n", handle);
-	return ext3_journal_restart(handle, blocks_for_truncate(inode));
+	/*
+	 * Drop truncate_mutex to avoid deadlock with ext3_get_blocks_handle
+	 * At this moment, get_block can be called only for blocks inside
+	 * i_size since page cache has been already dropped and writes are
+	 * blocked by i_mutex. So we can safely drop the truncate_mutex.
+	 */
+	mutex_unlock(&EXT3_I(inode)->truncate_mutex);
+	ret = ext3_journal_restart(handle, blocks_for_truncate(inode));
+	mutex_lock(&EXT3_I(inode)->truncate_mutex);
+	return ret;
 }
 
 /*
@@ -2072,7 +2083,7 @@ static void ext3_clear_blocks(handle_t *handle, struct inode *inode,
 			ext3_journal_dirty_metadata(handle, bh);
 		}
 		ext3_mark_inode_dirty(handle, inode);
-		ext3_journal_test_restart(handle, inode);
+		truncate_restart_transaction(handle, inode);
 		if (bh) {
 			BUFFER_TRACE(bh, "retaking write access");
 			ext3_journal_get_write_access(handle, bh);
@@ -2282,7 +2293,7 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode,
 				return;
 			if (try_to_extend_transaction(handle, inode)) {
 				ext3_mark_inode_dirty(handle, inode);
-				ext3_journal_test_restart(handle, inode);
+				truncate_restart_transaction(handle, inode);
 			}
 
 			ext3_free_blocks(handle, inode, nr, 1);
@@ -2892,6 +2903,10 @@ static int ext3_do_update_inode(handle_t *handle,
 	struct buffer_head *bh = iloc->bh;
 	int err = 0, rc, block;
 
+again:
+	/* we can't allow multiple procs in here at once, its a bit racey */
+	lock_buffer(bh);
+
 	/* For fields not not tracking in the in-memory inode,
 	 * initialise them to zero for new inodes. */
 	if (ei->i_state & EXT3_STATE_NEW)
@@ -2951,16 +2966,20 @@ static int ext3_do_update_inode(handle_t *handle,
 			       /* If this is the first large file
 				* created, add a flag to the superblock.
 				*/
+				unlock_buffer(bh);
 				err = ext3_journal_get_write_access(handle,
 						EXT3_SB(sb)->s_sbh);
 				if (err)
 					goto out_brelse;
+
 				ext3_update_dynamic_rev(sb);
 				EXT3_SET_RO_COMPAT_FEATURE(sb,
 					EXT3_FEATURE_RO_COMPAT_LARGE_FILE);
 				handle->h_sync = 1;
 				err = ext3_journal_dirty_metadata(handle,
 						EXT3_SB(sb)->s_sbh);
+				/* get our lock and start over */
+				goto again;
 			}
 		}
 	}
@@ -2983,6 +3002,7 @@ static int ext3_do_update_inode(handle_t *handle,
 		raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize);
 
 	BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata");
+	unlock_buffer(bh);
 	rc = ext3_journal_dirty_metadata(handle, bh);
 	if (!err)
 		err = rc;
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 99c99dfb0373..3773fd63d2f9 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -61,6 +61,121 @@ static ssize_t fuse_conn_waiting_read(struct file *file, char __user *buf,
 	return simple_read_from_buffer(buf, len, ppos, tmp, size);
 }
 
+static ssize_t fuse_conn_limit_read(struct file *file, char __user *buf,
+				    size_t len, loff_t *ppos, unsigned val)
+{
+	char tmp[32];
+	size_t size = sprintf(tmp, "%u\n", val);
+
+	return simple_read_from_buffer(buf, len, ppos, tmp, size);
+}
+
+static ssize_t fuse_conn_limit_write(struct file *file, const char __user *buf,
+				     size_t count, loff_t *ppos, unsigned *val,
+				     unsigned global_limit)
+{
+	unsigned long t;
+	char tmp[32];
+	unsigned limit = (1 << 16) - 1;
+	int err;
+
+	if (*ppos || count >= sizeof(tmp) - 1)
+		return -EINVAL;
+
+	if (copy_from_user(tmp, buf, count))
+		return -EINVAL;
+
+	tmp[count] = '\0';
+
+	err = strict_strtoul(tmp, 0, &t);
+	if (err)
+		return err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		limit = min(limit, global_limit);
+
+	if (t > limit)
+		return -EINVAL;
+
+	*val = t;
+
+	return count;
+}
+
+static ssize_t fuse_conn_max_background_read(struct file *file,
+					     char __user *buf, size_t len,
+					     loff_t *ppos)
+{
+	struct fuse_conn *fc;
+	unsigned val;
+
+	fc = fuse_ctl_file_conn_get(file);
+	if (!fc)
+		return 0;
+
+	val = fc->max_background;
+	fuse_conn_put(fc);
+
+	return fuse_conn_limit_read(file, buf, len, ppos, val);
+}
+
+static ssize_t fuse_conn_max_background_write(struct file *file,
+					      const char __user *buf,
+					      size_t count, loff_t *ppos)
+{
+	unsigned val;
+	ssize_t ret;
+
+	ret = fuse_conn_limit_write(file, buf, count, ppos, &val,
+				    max_user_bgreq);
+	if (ret > 0) {
+		struct fuse_conn *fc = fuse_ctl_file_conn_get(file);
+		if (fc) {
+			fc->max_background = val;
+			fuse_conn_put(fc);
+		}
+	}
+
+	return ret;
+}
+
+static ssize_t fuse_conn_congestion_threshold_read(struct file *file,
+						   char __user *buf, size_t len,
+						   loff_t *ppos)
+{
+	struct fuse_conn *fc;
+	unsigned val;
+
+	fc = fuse_ctl_file_conn_get(file);
+	if (!fc)
+		return 0;
+
+	val = fc->congestion_threshold;
+	fuse_conn_put(fc);
+
+	return fuse_conn_limit_read(file, buf, len, ppos, val);
+}
+
+static ssize_t fuse_conn_congestion_threshold_write(struct file *file,
+						    const char __user *buf,
+						    size_t count, loff_t *ppos)
+{
+	unsigned val;
+	ssize_t ret;
+
+	ret = fuse_conn_limit_write(file, buf, count, ppos, &val,
+				    max_user_congthresh);
+	if (ret > 0) {
+		struct fuse_conn *fc = fuse_ctl_file_conn_get(file);
+		if (fc) {
+			fc->congestion_threshold = val;
+			fuse_conn_put(fc);
+		}
+	}
+
+	return ret;
+}
+
 static const struct file_operations fuse_ctl_abort_ops = {
 	.open = nonseekable_open,
 	.write = fuse_conn_abort_write,
@@ -71,6 +186,18 @@ static const struct file_operations fuse_ctl_waiting_ops = {
 	.read = fuse_conn_waiting_read,
 };
 
+static const struct file_operations fuse_conn_max_background_ops = {
+	.open = nonseekable_open,
+	.read = fuse_conn_max_background_read,
+	.write = fuse_conn_max_background_write,
+};
+
+static const struct file_operations fuse_conn_congestion_threshold_ops = {
+	.open = nonseekable_open,
+	.read = fuse_conn_congestion_threshold_read,
+	.write = fuse_conn_congestion_threshold_write,
+};
+
 static struct dentry *fuse_ctl_add_dentry(struct dentry *parent,
 					  struct fuse_conn *fc,
 					  const char *name,
@@ -127,9 +254,14 @@ int fuse_ctl_add_conn(struct fuse_conn *fc)
 		goto err;
 
 	if (!fuse_ctl_add_dentry(parent, fc, "waiting", S_IFREG | 0400, 1,
-				NULL, &fuse_ctl_waiting_ops) ||
+				 NULL, &fuse_ctl_waiting_ops) ||
 	    !fuse_ctl_add_dentry(parent, fc, "abort", S_IFREG | 0200, 1,
-				 NULL, &fuse_ctl_abort_ops))
+				 NULL, &fuse_ctl_abort_ops) ||
+	    !fuse_ctl_add_dentry(parent, fc, "max_background", S_IFREG | 0600,
+				 1, NULL, &fuse_conn_max_background_ops) ||
+	    !fuse_ctl_add_dentry(parent, fc, "congestion_threshold",
+				 S_IFREG | 0600, 1, NULL,
+				 &fuse_conn_congestion_threshold_ops))
 		goto err;
 
 	return 0;
@@ -156,7 +288,7 @@ void fuse_ctl_remove_conn(struct fuse_conn *fc)
 		d_drop(dentry);
 		dput(dentry);
 	}
-	fuse_control_sb->s_root->d_inode->i_nlink--;
+	drop_nlink(fuse_control_sb->s_root->d_inode);
 }
 
 static int fuse_ctl_fill_super(struct super_block *sb, void *data, int silent)
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 6484eb75acd6..51d9e33d634f 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -250,7 +250,7 @@ static void queue_request(struct fuse_conn *fc, struct fuse_req *req)
 
 static void flush_bg_queue(struct fuse_conn *fc)
 {
-	while (fc->active_background < FUSE_MAX_BACKGROUND &&
+	while (fc->active_background < fc->max_background &&
 	       !list_empty(&fc->bg_queue)) {
 		struct fuse_req *req;
 
@@ -280,11 +280,11 @@ __releases(&fc->lock)
 	list_del(&req->intr_entry);
 	req->state = FUSE_REQ_FINISHED;
 	if (req->background) {
-		if (fc->num_background == FUSE_MAX_BACKGROUND) {
+		if (fc->num_background == fc->max_background) {
 			fc->blocked = 0;
 			wake_up_all(&fc->blocked_waitq);
 		}
-		if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+		if (fc->num_background == fc->congestion_threshold &&
 		    fc->connected && fc->bdi_initialized) {
 			clear_bdi_congested(&fc->bdi, BLK_RW_SYNC);
 			clear_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
@@ -410,9 +410,9 @@ static void fuse_request_send_nowait_locked(struct fuse_conn *fc,
 {
 	req->background = 1;
 	fc->num_background++;
-	if (fc->num_background == FUSE_MAX_BACKGROUND)
+	if (fc->num_background == fc->max_background)
 		fc->blocked = 1;
-	if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+	if (fc->num_background == fc->congestion_threshold &&
 	    fc->bdi_initialized) {
 		set_bdi_congested(&fc->bdi, BLK_RW_SYNC);
 		set_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 52b641fc0faf..fc9c79feb5f7 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -25,12 +25,6 @@
 /** Max number of pages that can be used in a single read request */
 #define FUSE_MAX_PAGES_PER_REQ 32
 
-/** Maximum number of outstanding background requests */
-#define FUSE_MAX_BACKGROUND 12
-
-/** Congestion starts at 75% of maximum */
-#define FUSE_CONGESTION_THRESHOLD (FUSE_MAX_BACKGROUND * 75 / 100)
-
 /** Bias for fi->writectr, meaning new writepages must not be sent */
 #define FUSE_NOWRITE INT_MIN
 
@@ -38,7 +32,7 @@
 #define FUSE_NAME_MAX 1024
 
 /** Number of dentries for each connection in the control filesystem */
-#define FUSE_CTL_NUM_DENTRIES 3
+#define FUSE_CTL_NUM_DENTRIES 5
 
 /** If the FUSE_DEFAULT_PERMISSIONS flag is given, the filesystem
     module will check permissions based on the file mode.  Otherwise no
@@ -55,6 +49,10 @@ extern struct list_head fuse_conn_list;
 /** Global mutex protecting fuse_conn_list and the control filesystem */
 extern struct mutex fuse_mutex;
 
+/** Module parameters */
+extern unsigned max_user_bgreq;
+extern unsigned max_user_congthresh;
+
 /** FUSE inode */
 struct fuse_inode {
 	/** Inode data */
@@ -349,6 +347,12 @@ struct fuse_conn {
 	/** rbtree of fuse_files waiting for poll events indexed by ph */
 	struct rb_root polled_files;
 
+	/** Maximum number of outstanding background requests */
+	unsigned max_background;
+
+	/** Number of background requests at which congestion starts */
+	unsigned congestion_threshold;
+
 	/** Number of requests currently in the background */
 	unsigned num_background;
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index e5dbecd87b0f..6da947daabda 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -14,6 +14,7 @@
 #include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/parser.h>
 #include <linux/statfs.h>
 #include <linux/random.h>
@@ -28,10 +29,34 @@ static struct kmem_cache *fuse_inode_cachep;
 struct list_head fuse_conn_list;
 DEFINE_MUTEX(fuse_mutex);
 
+static int set_global_limit(const char *val, struct kernel_param *kp);
+
+unsigned max_user_bgreq;
+module_param_call(max_user_bgreq, set_global_limit, param_get_uint,
+		  &max_user_bgreq, 0644);
+__MODULE_PARM_TYPE(max_user_bgreq, "uint");
+MODULE_PARM_DESC(max_user_bgreq,
+ "Global limit for the maximum number of backgrounded requests an "
+ "unprivileged user can set");
+
+unsigned max_user_congthresh;
+module_param_call(max_user_congthresh, set_global_limit, param_get_uint,
+		  &max_user_congthresh, 0644);
+__MODULE_PARM_TYPE(max_user_congthresh, "uint");
+MODULE_PARM_DESC(max_user_congthresh,
+ "Global limit for the maximum congestion threshold an "
+ "unprivileged user can set");
+
 #define FUSE_SUPER_MAGIC 0x65735546
 
 #define FUSE_DEFAULT_BLKSIZE 512
 
+/** Maximum number of outstanding background requests */
+#define FUSE_DEFAULT_MAX_BACKGROUND 12
+
+/** Congestion starts at 75% of maximum */
+#define FUSE_DEFAULT_CONGESTION_THRESHOLD (FUSE_DEFAULT_MAX_BACKGROUND * 3 / 4)
+
 struct fuse_mount_data {
 	int fd;
 	unsigned rootmode;
@@ -517,6 +542,8 @@ void fuse_conn_init(struct fuse_conn *fc)
 	INIT_LIST_HEAD(&fc->bg_queue);
 	INIT_LIST_HEAD(&fc->entry);
 	atomic_set(&fc->num_waiting, 0);
+	fc->max_background = FUSE_DEFAULT_MAX_BACKGROUND;
+	fc->congestion_threshold = FUSE_DEFAULT_CONGESTION_THRESHOLD;
 	fc->khctr = 0;
 	fc->polled_files = RB_ROOT;
 	fc->reqctr = 0;
@@ -727,6 +754,54 @@ static const struct super_operations fuse_super_operations = {
 	.show_options	= fuse_show_options,
 };
 
+static void sanitize_global_limit(unsigned *limit)
+{
+	if (*limit == 0)
+		*limit = ((num_physpages << PAGE_SHIFT) >> 13) /
+			 sizeof(struct fuse_req);
+
+	if (*limit >= 1 << 16)
+		*limit = (1 << 16) - 1;
+}
+
+static int set_global_limit(const char *val, struct kernel_param *kp)
+{
+	int rv;
+
+	rv = param_set_uint(val, kp);
+	if (rv)
+		return rv;
+
+	sanitize_global_limit((unsigned *)kp->arg);
+
+	return 0;
+}
+
+static void process_init_limits(struct fuse_conn *fc, struct fuse_init_out *arg)
+{
+	int cap_sys_admin = capable(CAP_SYS_ADMIN);
+
+	if (arg->minor < 13)
+		return;
+
+	sanitize_global_limit(&max_user_bgreq);
+	sanitize_global_limit(&max_user_congthresh);
+
+	if (arg->max_background) {
+		fc->max_background = arg->max_background;
+
+		if (!cap_sys_admin && fc->max_background > max_user_bgreq)
+			fc->max_background = max_user_bgreq;
+	}
+	if (arg->congestion_threshold) {
+		fc->congestion_threshold = arg->congestion_threshold;
+
+		if (!cap_sys_admin &&
+		    fc->congestion_threshold > max_user_congthresh)
+			fc->congestion_threshold = max_user_congthresh;
+	}
+}
+
 static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
 {
 	struct fuse_init_out *arg = &req->misc.init_out;
@@ -736,6 +811,8 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
 	else {
 		unsigned long ra_pages;
 
+		process_init_limits(fc, arg);
+
 		if (arg->minor >= 6) {
 			ra_pages = arg->max_readahead / PAGE_CACHE_SIZE;
 			if (arg->flags & FUSE_ASYNC_READ)
@@ -1150,6 +1227,9 @@ static int __init fuse_init(void)
 	if (res)
 		goto err_sysfs_cleanup;
 
+	sanitize_global_limit(&max_user_bgreq);
+	sanitize_global_limit(&max_user_congthresh);
+
 	return 0;
 
  err_sysfs_cleanup:
diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index 61f32f3868cd..b0435dd0654d 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -456,7 +456,7 @@ int cleanup_journal_tail(journal_t *journal)
 {
 	transaction_t * transaction;
 	tid_t		first_tid;
-	unsigned long	blocknr, freed;
+	unsigned int	blocknr, freed;
 
 	if (is_journal_aborted(journal))
 		return 1;
@@ -502,8 +502,8 @@ int cleanup_journal_tail(journal_t *journal)
 		freed = freed + journal->j_last - journal->j_first;
 
 	jbd_debug(1,
-		  "Cleaning journal tail from %d to %d (offset %lu), "
-		  "freeing %lu\n",
+		  "Cleaning journal tail from %d to %d (offset %u), "
+		  "freeing %u\n",
 		  journal->j_tail_sequence, first_tid, blocknr, freed);
 
 	journal->j_free += freed;
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 618e21c0b7a3..4bd882548c45 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -308,7 +308,7 @@ void journal_commit_transaction(journal_t *journal)
 	int bufs;
 	int flags;
 	int err;
-	unsigned long blocknr;
+	unsigned int blocknr;
 	ktime_t start_time;
 	u64 commit_time;
 	char *tagp = NULL;
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index f96f85092d1c..bd3c073b485d 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -276,7 +276,7 @@ static void journal_kill_thread(journal_t *journal)
 int journal_write_metadata_buffer(transaction_t *transaction,
 				  struct journal_head  *jh_in,
 				  struct journal_head **jh_out,
-				  unsigned long blocknr)
+				  unsigned int blocknr)
 {
 	int need_copy_out = 0;
 	int done_copy_out = 0;
@@ -567,9 +567,9 @@ int log_wait_commit(journal_t *journal, tid_t tid)
  * Log buffer allocation routines:
  */
 
-int journal_next_log_block(journal_t *journal, unsigned long *retp)
+int journal_next_log_block(journal_t *journal, unsigned int *retp)
 {
-	unsigned long blocknr;
+	unsigned int blocknr;
 
 	spin_lock(&journal->j_state_lock);
 	J_ASSERT(journal->j_free > 1);
@@ -590,11 +590,11 @@ int journal_next_log_block(journal_t *journal, unsigned long *retp)
  * this is a no-op.  If needed, we can use j_blk_offset - everything is
  * ready.
  */
-int journal_bmap(journal_t *journal, unsigned long blocknr,
-		 unsigned long *retp)
+int journal_bmap(journal_t *journal, unsigned int blocknr,
+		 unsigned int *retp)
 {
 	int err = 0;
-	unsigned long ret;
+	unsigned int ret;
 
 	if (journal->j_inode) {
 		ret = bmap(journal->j_inode, blocknr);
@@ -604,7 +604,7 @@ int journal_bmap(journal_t *journal, unsigned long blocknr,
 			char b[BDEVNAME_SIZE];
 
 			printk(KERN_ALERT "%s: journal block not found "
-					"at offset %lu on %s\n",
+					"at offset %u on %s\n",
 				__func__,
 				blocknr,
 				bdevname(journal->j_dev, b));
@@ -630,7 +630,7 @@ int journal_bmap(journal_t *journal, unsigned long blocknr,
 struct journal_head *journal_get_descriptor_buffer(journal_t *journal)
 {
 	struct buffer_head *bh;
-	unsigned long blocknr;
+	unsigned int blocknr;
 	int err;
 
 	err = journal_next_log_block(journal, &blocknr);
@@ -774,7 +774,7 @@ journal_t * journal_init_inode (struct inode *inode)
 	journal_t *journal = journal_init_common();
 	int err;
 	int n;
-	unsigned long blocknr;
+	unsigned int blocknr;
 
 	if (!journal)
 		return NULL;
@@ -846,12 +846,12 @@ static void journal_fail_superblock (journal_t *journal)
 static int journal_reset(journal_t *journal)
 {
 	journal_superblock_t *sb = journal->j_superblock;
-	unsigned long first, last;
+	unsigned int first, last;
 
 	first = be32_to_cpu(sb->s_first);
 	last = be32_to_cpu(sb->s_maxlen);
 	if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) {
-		printk(KERN_ERR "JBD: Journal too short (blocks %lu-%lu).\n",
+		printk(KERN_ERR "JBD: Journal too short (blocks %u-%u).\n",
 		       first, last);
 		journal_fail_superblock(journal);
 		return -EINVAL;
@@ -885,7 +885,7 @@ static int journal_reset(journal_t *journal)
  **/
 int journal_create(journal_t *journal)
 {
-	unsigned long blocknr;
+	unsigned int blocknr;
 	struct buffer_head *bh;
 	journal_superblock_t *sb;
 	int i, err;
@@ -969,14 +969,14 @@ void journal_update_superblock(journal_t *journal, int wait)
 	if (sb->s_start == 0 && journal->j_tail_sequence ==
 				journal->j_transaction_sequence) {
 		jbd_debug(1,"JBD: Skipping superblock update on recovered sb "
-			"(start %ld, seq %d, errno %d)\n",
+			"(start %u, seq %d, errno %d)\n",
 			journal->j_tail, journal->j_tail_sequence,
 			journal->j_errno);
 		goto out;
 	}
 
 	spin_lock(&journal->j_state_lock);
-	jbd_debug(1,"JBD: updating superblock (start %ld, seq %d, errno %d)\n",
+	jbd_debug(1,"JBD: updating superblock (start %u, seq %d, errno %d)\n",
 		  journal->j_tail, journal->j_tail_sequence, journal->j_errno);
 
 	sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
@@ -1371,7 +1371,7 @@ int journal_flush(journal_t *journal)
 {
 	int err = 0;
 	transaction_t *transaction = NULL;
-	unsigned long old_tail;
+	unsigned int old_tail;
 
 	spin_lock(&journal->j_state_lock);
 
diff --git a/fs/jbd/recovery.c b/fs/jbd/recovery.c
index db5e982c5ddf..cb1a49ae605e 100644
--- a/fs/jbd/recovery.c
+++ b/fs/jbd/recovery.c
@@ -70,7 +70,7 @@ static int do_readahead(journal_t *journal, unsigned int start)
 {
 	int err;
 	unsigned int max, nbufs, next;
-	unsigned long blocknr;
+	unsigned int blocknr;
 	struct buffer_head *bh;
 
 	struct buffer_head * bufs[MAXBUF];
@@ -132,7 +132,7 @@ static int jread(struct buffer_head **bhp, journal_t *journal,
 		 unsigned int offset)
 {
 	int err;
-	unsigned long blocknr;
+	unsigned int blocknr;
 	struct buffer_head *bh;
 
 	*bhp = NULL;
@@ -314,7 +314,7 @@ static int do_one_pass(journal_t *journal,
 			struct recovery_info *info, enum passtype pass)
 {
 	unsigned int		first_commit_ID, next_commit_ID;
-	unsigned long		next_log_block;
+	unsigned int		next_log_block;
 	int			err, success = 0;
 	journal_superblock_t *	sb;
 	journal_header_t *	tmp;
@@ -367,14 +367,14 @@ static int do_one_pass(journal_t *journal,
 			if (tid_geq(next_commit_ID, info->end_transaction))
 				break;
 
-		jbd_debug(2, "Scanning for sequence ID %u at %lu/%lu\n",
+		jbd_debug(2, "Scanning for sequence ID %u at %u/%u\n",
 			  next_commit_ID, next_log_block, journal->j_last);
 
 		/* Skip over each chunk of the transaction looking
 		 * either the next descriptor block or the final commit
 		 * record. */
 
-		jbd_debug(3, "JBD: checking block %ld\n", next_log_block);
+		jbd_debug(3, "JBD: checking block %u\n", next_log_block);
 		err = jread(&bh, journal, next_log_block);
 		if (err)
 			goto failed;
@@ -429,7 +429,7 @@ static int do_one_pass(journal_t *journal,
 			tagp = &bh->b_data[sizeof(journal_header_t)];
 			while ((tagp - bh->b_data +sizeof(journal_block_tag_t))
 			       <= journal->j_blocksize) {
-				unsigned long io_block;
+				unsigned int io_block;
 
 				tag = (journal_block_tag_t *) tagp;
 				flags = be32_to_cpu(tag->t_flags);
@@ -443,10 +443,10 @@ static int do_one_pass(journal_t *journal,
 					success = err;
 					printk (KERN_ERR
 						"JBD: IO error %d recovering "
-						"block %ld in log\n",
+						"block %u in log\n",
 						err, io_block);
 				} else {
-					unsigned long blocknr;
+					unsigned int blocknr;
 
 					J_ASSERT(obh != NULL);
 					blocknr = be32_to_cpu(tag->t_blocknr);
@@ -581,7 +581,7 @@ static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
 	max = be32_to_cpu(header->r_count);
 
 	while (offset < max) {
-		unsigned long blocknr;
+		unsigned int blocknr;
 		int err;
 
 		blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset)));
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index da6cd9bdaabc..ad717328343a 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -101,7 +101,7 @@ struct jbd_revoke_record_s
 {
 	struct list_head  hash;
 	tid_t		  sequence;	/* Used for recovery only */
-	unsigned long	  blocknr;
+	unsigned int	  blocknr;
 };
 
 
@@ -126,7 +126,7 @@ static void flush_descriptor(journal_t *, struct journal_head *, int, int);
 /* Utility functions to maintain the revoke table */
 
 /* Borrowed from buffer.c: this is a tried and tested block hash function */
-static inline int hash(journal_t *journal, unsigned long block)
+static inline int hash(journal_t *journal, unsigned int block)
 {
 	struct jbd_revoke_table_s *table = journal->j_revoke;
 	int hash_shift = table->hash_shift;
@@ -136,7 +136,7 @@ static inline int hash(journal_t *journal, unsigned long block)
 		(block << (hash_shift - 12))) & (table->hash_size - 1);
 }
 
-static int insert_revoke_hash(journal_t *journal, unsigned long blocknr,
+static int insert_revoke_hash(journal_t *journal, unsigned int blocknr,
 			      tid_t seq)
 {
 	struct list_head *hash_list;
@@ -166,7 +166,7 @@ oom:
 /* Find a revoke record in the journal's hash table. */
 
 static struct jbd_revoke_record_s *find_revoke_record(journal_t *journal,
-						      unsigned long blocknr)
+						      unsigned int blocknr)
 {
 	struct list_head *hash_list;
 	struct jbd_revoke_record_s *record;
@@ -332,7 +332,7 @@ void journal_destroy_revoke(journal_t *journal)
  * by one.
  */
 
-int journal_revoke(handle_t *handle, unsigned long blocknr,
+int journal_revoke(handle_t *handle, unsigned int blocknr,
 		   struct buffer_head *bh_in)
 {
 	struct buffer_head *bh = NULL;
@@ -401,7 +401,7 @@ int journal_revoke(handle_t *handle, unsigned long blocknr,
 		}
 	}
 
-	jbd_debug(2, "insert revoke for block %lu, bh_in=%p\n", blocknr, bh_in);
+	jbd_debug(2, "insert revoke for block %u, bh_in=%p\n", blocknr, bh_in);
 	err = insert_revoke_hash(journal, blocknr,
 				handle->h_transaction->t_tid);
 	BUFFER_TRACE(bh_in, "exit");
@@ -644,7 +644,7 @@ static void flush_descriptor(journal_t *journal,
  */
 
 int journal_set_revoke(journal_t *journal,
-		       unsigned long blocknr,
+		       unsigned int blocknr,
 		       tid_t sequence)
 {
 	struct jbd_revoke_record_s *record;
@@ -668,7 +668,7 @@ int journal_set_revoke(journal_t *journal,
  */
 
 int journal_test_revoke(journal_t *journal,
-			unsigned long blocknr,
+			unsigned int blocknr,
 			tid_t sequence)
 {
 	struct jbd_revoke_record_s *record;
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index c03ac11f74be..006f9ad838a2 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -56,7 +56,8 @@ get_transaction(journal_t *journal, transaction_t *transaction)
 	spin_lock_init(&transaction->t_handle_lock);
 
 	/* Set up the commit timer for the new transaction. */
-	journal->j_commit_timer.expires = round_jiffies(transaction->t_expires);
+	journal->j_commit_timer.expires =
+				round_jiffies_up(transaction->t_expires);
 	add_timer(&journal->j_commit_timer);
 
 	J_ASSERT(journal->j_running_transaction == NULL);
@@ -228,6 +229,8 @@ repeat_locked:
 		  __log_space_left(journal));
 	spin_unlock(&transaction->t_handle_lock);
 	spin_unlock(&journal->j_state_lock);
+
+	lock_map_acquire(&handle->h_lockdep_map);
 out:
 	if (unlikely(new_transaction))		/* It's usually NULL */
 		kfree(new_transaction);
@@ -292,9 +295,6 @@ handle_t *journal_start(journal_t *journal, int nblocks)
 		handle = ERR_PTR(err);
 		goto out;
 	}
-
-	lock_map_acquire(&handle->h_lockdep_map);
-
 out:
 	return handle;
 }
@@ -416,6 +416,7 @@ int journal_restart(handle_t *handle, int nblocks)
 	__log_start_commit(journal, transaction->t_tid);
 	spin_unlock(&journal->j_state_lock);
 
+	lock_map_release(&handle->h_lockdep_map);
 	handle->h_buffer_credits = nblocks;
 	ret = start_this_handle(journal, handle);
 	return ret;
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index aecf2519db76..d5e5559e31db 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -216,7 +216,6 @@ xfs_setfilesize(
 	if (ip->i_d.di_size < isize) {
 		ip->i_d.di_size = isize;
 		ip->i_update_core = 1;
-		ip->i_update_size = 1;
 		xfs_mark_inode_dirty_sync(ip);
 	}
 
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 0542fd507649..988d8f87bc0f 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -172,12 +172,21 @@ xfs_file_release(
  */
 STATIC int
 xfs_file_fsync(
-	struct file	*filp,
-	struct dentry	*dentry,
-	int		datasync)
+	struct file		*file,
+	struct dentry		*dentry,
+	int			datasync)
 {
-	xfs_iflags_clear(XFS_I(dentry->d_inode), XFS_ITRUNCATED);
-	return -xfs_fsync(XFS_I(dentry->d_inode));
+	struct inode		*inode = dentry->d_inode;
+	struct xfs_inode	*ip = XFS_I(inode);
+	int			error;
+
+	/* capture size updates in I/O completion before writing the inode. */
+	error = filemap_fdatawait(inode->i_mapping);
+	if (error)
+		return error;
+
+	xfs_iflags_clear(ip, XFS_ITRUNCATED);
+	return -xfs_fsync(ip);
 }
 
 STATIC int
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 6c32f1d63d8c..da0159d99f82 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -43,7 +43,6 @@
 #include "xfs_error.h"
 #include "xfs_itable.h"
 #include "xfs_rw.h"
-#include "xfs_acl.h"
 #include "xfs_attr.h"
 #include "xfs_buf_item.h"
 #include "xfs_utils.h"
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index fde63a3c4ecc..49e4a6aea73c 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -812,19 +812,21 @@ write_retry:
 
 	/* Handle various SYNC-type writes */
 	if ((file->f_flags & O_SYNC) || IS_SYNC(inode)) {
+		loff_t end = pos + ret - 1;
 		int error2;
 
 		xfs_iunlock(xip, iolock);
 		if (need_i_mutex)
 			mutex_unlock(&inode->i_mutex);
-		error2 = filemap_write_and_wait_range(mapping, pos,
-						      pos + ret - 1);
+
+		error2 = filemap_write_and_wait_range(mapping, pos, end);
 		if (!error)
 			error = error2;
 		if (need_i_mutex)
 			mutex_lock(&inode->i_mutex);
 		xfs_ilock(xip, iolock);
-		error2 = xfs_write_sync_logforce(mp, xip);
+
+		error2 = xfs_fsync(xip);
 		if (!error)
 			error = error2;
 	}
diff --git a/fs/xfs/linux-2.6/xfs_stats.c b/fs/xfs/linux-2.6/xfs_stats.c
index c3526d445f6a..76fdc5861932 100644
--- a/fs/xfs/linux-2.6/xfs_stats.c
+++ b/fs/xfs/linux-2.6/xfs_stats.c
@@ -20,16 +20,9 @@
 
 DEFINE_PER_CPU(struct xfsstats, xfsstats);
 
-STATIC int
-xfs_read_xfsstats(
-	char		*buffer,
-	char		**start,
-	off_t		offset,
-	int		count,
-	int		*eof,
-	void		*data)
+static int xfs_stat_proc_show(struct seq_file *m, void *v)
 {
-	int		c, i, j, len, val;
+	int		c, i, j, val;
 	__uint64_t	xs_xstrat_bytes = 0;
 	__uint64_t	xs_write_bytes = 0;
 	__uint64_t	xs_read_bytes = 0;
@@ -60,18 +53,18 @@ xfs_read_xfsstats(
 	};
 
 	/* Loop over all stats groups */
-	for (i=j=len = 0; i < ARRAY_SIZE(xstats); i++) {
-		len += sprintf(buffer + len, "%s", xstats[i].desc);
+	for (i=j = 0; i < ARRAY_SIZE(xstats); i++) {
+		seq_printf(m, "%s", xstats[i].desc);
 		/* inner loop does each group */
 		while (j < xstats[i].endpoint) {
 			val = 0;
 			/* sum over all cpus */
 			for_each_possible_cpu(c)
 				val += *(((__u32*)&per_cpu(xfsstats, c) + j));
-			len += sprintf(buffer + len, " %u", val);
+			seq_printf(m, " %u", val);
 			j++;
 		}
-		buffer[len++] = '\n';
+		seq_putc(m, '\n');
 	}
 	/* extra precision counters */
 	for_each_possible_cpu(i) {
@@ -80,36 +73,38 @@ xfs_read_xfsstats(
 		xs_read_bytes += per_cpu(xfsstats, i).xs_read_bytes;
 	}
 
-	len += sprintf(buffer + len, "xpc %Lu %Lu %Lu\n",
+	seq_printf(m, "xpc %Lu %Lu %Lu\n",
 			xs_xstrat_bytes, xs_write_bytes, xs_read_bytes);
-	len += sprintf(buffer + len, "debug %u\n",
+	seq_printf(m, "debug %u\n",
 #if defined(DEBUG)
 		1);
 #else
 		0);
 #endif
+	return 0;
+}
 
-	if (offset >= len) {
-		*start = buffer;
-		*eof = 1;
-		return 0;
-	}
-	*start = buffer + offset;
-	if ((len -= offset) > count)
-		return count;
-	*eof = 1;
-
-	return len;
+static int xfs_stat_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, xfs_stat_proc_show, NULL);
 }
 
+static const struct file_operations xfs_stat_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= xfs_stat_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 int
 xfs_init_procfs(void)
 {
 	if (!proc_mkdir("fs/xfs", NULL))
 		goto out;
 
-	if (!create_proc_read_entry("fs/xfs/stat", 0, NULL,
-			xfs_read_xfsstats, NULL))
+	if (!proc_create("fs/xfs/stat", 0, NULL,
+			 &xfs_stat_proc_fops))
 		goto out_remove_entry;
 	return 0;
 
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index a220d36f789b..5d7c60ac77b4 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -579,15 +579,19 @@ xfs_showargs(
 	else if (mp->m_qflags & XFS_UQUOTA_ACCT)
 		seq_puts(m, "," MNTOPT_UQUOTANOENF);
 
-	if (mp->m_qflags & (XFS_PQUOTA_ACCT|XFS_OQUOTA_ENFD))
-		seq_puts(m, "," MNTOPT_PRJQUOTA);
-	else if (mp->m_qflags & XFS_PQUOTA_ACCT)
-		seq_puts(m, "," MNTOPT_PQUOTANOENF);
-
-	if (mp->m_qflags & (XFS_GQUOTA_ACCT|XFS_OQUOTA_ENFD))
-		seq_puts(m, "," MNTOPT_GRPQUOTA);
-	else if (mp->m_qflags & XFS_GQUOTA_ACCT)
-		seq_puts(m, "," MNTOPT_GQUOTANOENF);
+	/* Either project or group quotas can be active, not both */
+
+	if (mp->m_qflags & XFS_PQUOTA_ACCT) {
+		if (mp->m_qflags & XFS_OQUOTA_ENFD)
+			seq_puts(m, "," MNTOPT_PRJQUOTA);
+		else
+			seq_puts(m, "," MNTOPT_PQUOTANOENF);
+	} else if (mp->m_qflags & XFS_GQUOTA_ACCT) {
+		if (mp->m_qflags & XFS_OQUOTA_ENFD)
+			seq_puts(m, "," MNTOPT_GRPQUOTA);
+		else
+			seq_puts(m, "," MNTOPT_GQUOTANOENF);
+	}
 
 	if (!(mp->m_qflags & XFS_ALL_QUOTA_ACCT))
 		seq_puts(m, "," MNTOPT_NOQUOTA);
@@ -687,7 +691,7 @@ xfs_barrier_test(
 	return error;
 }
 
-void
+STATIC void
 xfs_mountfs_check_barriers(xfs_mount_t *mp)
 {
 	int error;
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 98ef624d9baf..320be6aea492 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -749,21 +749,6 @@ __xfs_inode_clear_reclaim_tag(
 			XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
 }
 
-void
-xfs_inode_clear_reclaim_tag(
-	xfs_inode_t	*ip)
-{
-	xfs_mount_t	*mp = ip->i_mount;
-	xfs_perag_t	*pag = xfs_get_perag(mp, ip->i_ino);
-
-	read_lock(&pag->pag_ici_lock);
-	spin_lock(&ip->i_flags_lock);
-	__xfs_inode_clear_reclaim_tag(mp, pag, ip);
-	spin_unlock(&ip->i_flags_lock);
-	read_unlock(&pag->pag_ici_lock);
-	xfs_put_perag(mp, pag);
-}
-
 STATIC int
 xfs_reclaim_inode_now(
 	struct xfs_inode	*ip,
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index 59120602588a..27920eb7a820 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -49,7 +49,6 @@ int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
 
 void xfs_inode_set_reclaim_tag(struct xfs_inode *ip);
 void __xfs_inode_set_reclaim_tag(struct xfs_perag *pag, struct xfs_inode *ip);
-void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip);
 void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag,
 				struct xfs_inode *ip);
 
diff --git a/fs/xfs/quota/xfs_qm_stats.c b/fs/xfs/quota/xfs_qm_stats.c
index 21b08c0396a1..83e7ea3e25fa 100644
--- a/fs/xfs/quota/xfs_qm_stats.c
+++ b/fs/xfs/quota/xfs_qm_stats.c
@@ -48,50 +48,34 @@
 
 struct xqmstats xqmstats;
 
-STATIC int
-xfs_qm_read_xfsquota(
-	char		*buffer,
-	char		**start,
-	off_t		offset,
-	int		count,
-	int		*eof,
-	void		*data)
+static int xqm_proc_show(struct seq_file *m, void *v)
 {
-	int		len;
-
 	/* maximum; incore; ratio free to inuse; freelist */
-	len = sprintf(buffer, "%d\t%d\t%d\t%u\n",
+	seq_printf(m, "%d\t%d\t%d\t%u\n",
 			ndquot,
 			xfs_Gqm? atomic_read(&xfs_Gqm->qm_totaldquots) : 0,
 			xfs_Gqm? xfs_Gqm->qm_dqfree_ratio : 0,
 			xfs_Gqm? xfs_Gqm->qm_dqfreelist.qh_nelems : 0);
-
-	if (offset >= len) {
-		*start = buffer;
-		*eof = 1;
-		return 0;
-	}
-	*start = buffer + offset;
-	if ((len -= offset) > count)
-		return count;
-	*eof = 1;
-
-	return len;
+	return 0;
 }
 
-STATIC int
-xfs_qm_read_stats(
-	char		*buffer,
-	char		**start,
-	off_t		offset,
-	int		count,
-	int		*eof,
-	void		*data)
+static int xqm_proc_open(struct inode *inode, struct file *file)
 {
-	int		len;
+	return single_open(file, xqm_proc_show, NULL);
+}
+
+static const struct file_operations xqm_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= xqm_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
+static int xqmstat_proc_show(struct seq_file *m, void *v)
+{
 	/* quota performance statistics */
-	len = sprintf(buffer, "qm %u %u %u %u %u %u %u %u\n",
+	seq_printf(m, "qm %u %u %u %u %u %u %u %u\n",
 			xqmstats.xs_qm_dqreclaims,
 			xqmstats.xs_qm_dqreclaim_misses,
 			xqmstats.xs_qm_dquot_dups,
@@ -100,25 +84,27 @@ xfs_qm_read_stats(
 			xqmstats.xs_qm_dqwants,
 			xqmstats.xs_qm_dqshake_reclaims,
 			xqmstats.xs_qm_dqinact_reclaims);
+	return 0;
+}
 
-	if (offset >= len) {
-		*start = buffer;
-		*eof = 1;
-		return 0;
-	}
-	*start = buffer + offset;
-	if ((len -= offset) > count)
-		return count;
-	*eof = 1;
-
-	return len;
+static int xqmstat_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, xqmstat_proc_show, NULL);
 }
 
+static const struct file_operations xqmstat_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= xqmstat_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 void
 xfs_qm_init_procfs(void)
 {
-	create_proc_read_entry("fs/xfs/xqmstat", 0, NULL, xfs_qm_read_stats, NULL);
-	create_proc_read_entry("fs/xfs/xqm", 0, NULL, xfs_qm_read_xfsquota, NULL);
+	proc_create("fs/xfs/xqmstat", 0, NULL, &xqmstat_proc_fops);
+	proc_create("fs/xfs/xqm", 0, NULL, &xqm_proc_fops);
 }
 
 void
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index f24b50b68d03..a5d54bf4931b 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -198,6 +198,15 @@ typedef struct xfs_perag
 	xfs_agino_t	pagi_count;	/* number of allocated inodes */
 	int		pagb_count;	/* pagb slots in use */
 	xfs_perag_busy_t *pagb_list;	/* unstable blocks */
+
+	/*
+	 * Inode allocation search lookup optimisation.
+	 * If the pagino matches, the search for new inodes
+	 * doesn't need to search the near ones again straight away
+	 */
+	xfs_agino_t	pagl_pagino;
+	xfs_agino_t	pagl_leftrec;
+	xfs_agino_t	pagl_rightrec;
 #ifdef __KERNEL__
 	spinlock_t	pagb_lock;	/* lock for pagb_list */
 
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 8ee5b5a76a2a..8971fb09d387 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -3713,7 +3713,7 @@ done:
  * entry (null if none).  Else, *lastxp will be set to the index
  * of the found entry; *gotp will contain the entry.
  */
-xfs_bmbt_rec_host_t *			/* pointer to found extent entry */
+STATIC xfs_bmbt_rec_host_t *		/* pointer to found extent entry */
 xfs_bmap_search_multi_extents(
 	xfs_ifork_t	*ifp,		/* inode fork pointer */
 	xfs_fileoff_t	bno,		/* block number searched for */
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 1b8ff9256bd0..56f62d2edc35 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -392,17 +392,6 @@ xfs_bmap_count_blocks(
 	int			whichfork,
 	int			*count);
 
-/*
- * Search the extent records for the entry containing block bno.
- * If bno lies in a hole, point to the next entry.  If bno lies
- * past eof, *eofp will be set, and *prevp will contain the last
- * entry (null if none).  Else, *lastxp will be set to the index
- * of the found entry; *gotp will contain the entry.
- */
-xfs_bmbt_rec_host_t *
-xfs_bmap_search_multi_extents(struct xfs_ifork *, xfs_fileoff_t, int *,
-			xfs_extnum_t *, xfs_bmbt_irec_t *, xfs_bmbt_irec_t *);
-
 #endif	/* __KERNEL__ */
 
 #endif	/* __XFS_BMAP_H__ */
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 5c1ade06578e..eb7b702d0690 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -202,16 +202,6 @@ xfs_bmbt_get_state(
 				ext_flag);
 }
 
-/* Endian flipping versions of the bmbt extraction functions */
-void
-xfs_bmbt_disk_get_all(
-	xfs_bmbt_rec_t	*r,
-	xfs_bmbt_irec_t *s)
-{
-	__xfs_bmbt_get_all(get_unaligned_be64(&r->l0),
-				get_unaligned_be64(&r->l1), s);
-}
-
 /*
  * Extract the blockcount field from an on disk bmap extent record.
  */
@@ -816,6 +806,16 @@ xfs_bmbt_trace_key(
 	*l1 = 0;
 }
 
+/* Endian flipping versions of the bmbt extraction functions */
+STATIC void
+xfs_bmbt_disk_get_all(
+	xfs_bmbt_rec_t	*r,
+	xfs_bmbt_irec_t *s)
+{
+	__xfs_bmbt_get_all(get_unaligned_be64(&r->l0),
+				get_unaligned_be64(&r->l1), s);
+}
+
 STATIC void
 xfs_bmbt_trace_record(
 	struct xfs_btree_cur	*cur,
diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h
index 0e8df007615e..5549d495947f 100644
--- a/fs/xfs/xfs_bmap_btree.h
+++ b/fs/xfs/xfs_bmap_btree.h
@@ -220,7 +220,6 @@ extern xfs_fsblock_t xfs_bmbt_get_startblock(xfs_bmbt_rec_host_t *r);
 extern xfs_fileoff_t xfs_bmbt_get_startoff(xfs_bmbt_rec_host_t *r);
 extern xfs_exntst_t xfs_bmbt_get_state(xfs_bmbt_rec_host_t *r);
 
-extern void xfs_bmbt_disk_get_all(xfs_bmbt_rec_t *r, xfs_bmbt_irec_t *s);
 extern xfs_filblks_t xfs_bmbt_disk_get_blockcount(xfs_bmbt_rec_t *r);
 extern xfs_fileoff_t xfs_bmbt_disk_get_startoff(xfs_bmbt_rec_t *r);
 
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 26717388acf5..52b5f14d0c32 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -646,46 +646,6 @@ xfs_btree_read_bufl(
 }
 
 /*
- * Get a buffer for the block, return it read in.
- * Short-form addressing.
- */
-int					/* error */
-xfs_btree_read_bufs(
-	xfs_mount_t	*mp,		/* file system mount point */
-	xfs_trans_t	*tp,		/* transaction pointer */
-	xfs_agnumber_t	agno,		/* allocation group number */
-	xfs_agblock_t	agbno,		/* allocation group block number */
-	uint		lock,		/* lock flags for read_buf */
-	xfs_buf_t	**bpp,		/* buffer for agno/agbno */
-	int		refval)		/* ref count value for buffer */
-{
-	xfs_buf_t	*bp;		/* return value */
-	xfs_daddr_t	d;		/* real disk block address */
-	int		error;
-
-	ASSERT(agno != NULLAGNUMBER);
-	ASSERT(agbno != NULLAGBLOCK);
-	d = XFS_AGB_TO_DADDR(mp, agno, agbno);
-	if ((error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, d,
-					mp->m_bsize, lock, &bp))) {
-		return error;
-	}
-	ASSERT(!bp || !XFS_BUF_GETERROR(bp));
-	if (bp != NULL) {
-		switch (refval) {
-		case XFS_ALLOC_BTREE_REF:
-			XFS_BUF_SET_VTYPE_REF(bp, B_FS_MAP, refval);
-			break;
-		case XFS_INO_BTREE_REF:
-			XFS_BUF_SET_VTYPE_REF(bp, B_FS_INOMAP, refval);
-			break;
-		}
-	}
-	*bpp = bp;
-	return 0;
-}
-
-/*
  * Read-ahead the block, don't wait for it, don't return a buffer.
  * Long-form addressing.
  */
@@ -2951,7 +2911,7 @@ error0:
  * inode we have to copy the single block it was pointing to into the
  * inode.
  */
-int
+STATIC int
 xfs_btree_kill_iroot(
 	struct xfs_btree_cur	*cur)
 {
diff --git a/fs/xfs/xfs_btree.h b/fs/xfs/xfs_btree.h
index 4f852b735b96..7fa07062bdda 100644
--- a/fs/xfs/xfs_btree.h
+++ b/fs/xfs/xfs_btree.h
@@ -379,20 +379,6 @@ xfs_btree_read_bufl(
 	int			refval);/* ref count value for buffer */
 
 /*
- * Get a buffer for the block, return it read in.
- * Short-form addressing.
- */
-int					/* error */
-xfs_btree_read_bufs(
-	struct xfs_mount	*mp,	/* file system mount point */
-	struct xfs_trans	*tp,	/* transaction pointer */
-	xfs_agnumber_t		agno,	/* allocation group number */
-	xfs_agblock_t		agbno,	/* allocation group block number */
-	uint			lock,	/* lock flags for read_buf */
-	struct xfs_buf		**bpp,	/* buffer for agno/agbno */
-	int			refval);/* ref count value for buffer */
-
-/*
  * Read-ahead the block, don't wait for it, don't return a buffer.
  * Long-form addressing.
  */
@@ -432,7 +418,6 @@ int xfs_btree_decrement(struct xfs_btree_cur *, int, int *);
 int xfs_btree_lookup(struct xfs_btree_cur *, xfs_lookup_t, int *);
 int xfs_btree_update(struct xfs_btree_cur *, union xfs_btree_rec *);
 int xfs_btree_new_iroot(struct xfs_btree_cur *, int *, int *);
-int xfs_btree_kill_iroot(struct xfs_btree_cur *);
 int xfs_btree_insert(struct xfs_btree_cur *, int *);
 int xfs_btree_delete(struct xfs_btree_cur *, int *);
 int xfs_btree_get_rec(struct xfs_btree_cur *, union xfs_btree_rec **, int *);
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index 3120a3a5e20f..ab64f3efb43b 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -57,75 +57,35 @@ xfs_ialloc_cluster_alignment(
 }
 
 /*
- * Lookup the record equal to ino in the btree given by cur.
- */
-STATIC int				/* error */
-xfs_inobt_lookup_eq(
-	struct xfs_btree_cur	*cur,	/* btree cursor */
-	xfs_agino_t		ino,	/* starting inode of chunk */
-	__int32_t		fcnt,	/* free inode count */
-	xfs_inofree_t		free,	/* free inode mask */
-	int			*stat)	/* success/failure */
-{
-	cur->bc_rec.i.ir_startino = ino;
-	cur->bc_rec.i.ir_freecount = fcnt;
-	cur->bc_rec.i.ir_free = free;
-	return xfs_btree_lookup(cur, XFS_LOOKUP_EQ, stat);
-}
-
-/*
- * Lookup the first record greater than or equal to ino
- * in the btree given by cur.
+ * Lookup a record by ino in the btree given by cur.
  */
 int					/* error */
-xfs_inobt_lookup_ge(
+xfs_inobt_lookup(
 	struct xfs_btree_cur	*cur,	/* btree cursor */
 	xfs_agino_t		ino,	/* starting inode of chunk */
-	__int32_t		fcnt,	/* free inode count */
-	xfs_inofree_t		free,	/* free inode mask */
+	xfs_lookup_t		dir,	/* <=, >=, == */
 	int			*stat)	/* success/failure */
 {
 	cur->bc_rec.i.ir_startino = ino;
-	cur->bc_rec.i.ir_freecount = fcnt;
-	cur->bc_rec.i.ir_free = free;
-	return xfs_btree_lookup(cur, XFS_LOOKUP_GE, stat);
+	cur->bc_rec.i.ir_freecount = 0;
+	cur->bc_rec.i.ir_free = 0;
+	return xfs_btree_lookup(cur, dir, stat);
 }
 
 /*
- * Lookup the first record less than or equal to ino
- * in the btree given by cur.
- */
-int					/* error */
-xfs_inobt_lookup_le(
-	struct xfs_btree_cur	*cur,	/* btree cursor */
-	xfs_agino_t		ino,	/* starting inode of chunk */
-	__int32_t		fcnt,	/* free inode count */
-	xfs_inofree_t		free,	/* free inode mask */
-	int			*stat)	/* success/failure */
-{
-	cur->bc_rec.i.ir_startino = ino;
-	cur->bc_rec.i.ir_freecount = fcnt;
-	cur->bc_rec.i.ir_free = free;
-	return xfs_btree_lookup(cur, XFS_LOOKUP_LE, stat);
-}
-
-/*
- * Update the record referred to by cur to the value given
- * by [ino, fcnt, free].
+ * Update the record referred to by cur to the value given.
  * This either works (return 0) or gets an EFSCORRUPTED error.
  */
 STATIC int				/* error */
 xfs_inobt_update(
 	struct xfs_btree_cur	*cur,	/* btree cursor */
-	xfs_agino_t		ino,	/* starting inode of chunk */
-	__int32_t		fcnt,	/* free inode count */
-	xfs_inofree_t		free)	/* free inode mask */
+	xfs_inobt_rec_incore_t	*irec)	/* btree record */
 {
 	union xfs_btree_rec	rec;
 
-	rec.inobt.ir_startino = cpu_to_be32(ino);
-	rec.inobt.ir_freecount = cpu_to_be32(fcnt);
-	rec.inobt.ir_free = cpu_to_be64(free);
+	rec.inobt.ir_startino = cpu_to_be32(irec->ir_startino);
+	rec.inobt.ir_freecount = cpu_to_be32(irec->ir_freecount);
+	rec.inobt.ir_free = cpu_to_be64(irec->ir_free);
 	return xfs_btree_update(cur, &rec);
 }
 
@@ -135,9 +95,7 @@ xfs_inobt_update(
 int					/* error */
 xfs_inobt_get_rec(
 	struct xfs_btree_cur	*cur,	/* btree cursor */
-	xfs_agino_t		*ino,	/* output: starting inode of chunk */
-	__int32_t		*fcnt,	/* output: number of free inodes */
-	xfs_inofree_t		*free,	/* output: free inode mask */
+	xfs_inobt_rec_incore_t	*irec,	/* btree record */
 	int			*stat)	/* output: success/failure */
 {
 	union xfs_btree_rec	*rec;
@@ -145,14 +103,136 @@ xfs_inobt_get_rec(
 
 	error = xfs_btree_get_rec(cur, &rec, stat);
 	if (!error && *stat == 1) {
-		*ino = be32_to_cpu(rec->inobt.ir_startino);
-		*fcnt = be32_to_cpu(rec->inobt.ir_freecount);
-		*free = be64_to_cpu(rec->inobt.ir_free);
+		irec->ir_startino = be32_to_cpu(rec->inobt.ir_startino);
+		irec->ir_freecount = be32_to_cpu(rec->inobt.ir_freecount);
+		irec->ir_free = be64_to_cpu(rec->inobt.ir_free);
 	}
 	return error;
 }
 
 /*
+ * Verify that the number of free inodes in the AGI is correct.
+ */
+#ifdef DEBUG
+STATIC int
+xfs_check_agi_freecount(
+	struct xfs_btree_cur	*cur,
+	struct xfs_agi		*agi)
+{
+	if (cur->bc_nlevels == 1) {
+		xfs_inobt_rec_incore_t rec;
+		int		freecount = 0;
+		int		error;
+		int		i;
+
+		error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &i);
+		if (error)
+			return error;
+
+		do {
+			error = xfs_inobt_get_rec(cur, &rec, &i);
+			if (error)
+				return error;
+
+			if (i) {
+				freecount += rec.ir_freecount;
+				error = xfs_btree_increment(cur, 0, &i);
+				if (error)
+					return error;
+			}
+		} while (i == 1);
+
+		if (!XFS_FORCED_SHUTDOWN(cur->bc_mp))
+			ASSERT(freecount == be32_to_cpu(agi->agi_freecount));
+	}
+	return 0;
+}
+#else
+#define xfs_check_agi_freecount(cur, agi)	0
+#endif
+
+/*
+ * Initialise a new set of inodes.
+ */
+STATIC void
+xfs_ialloc_inode_init(
+	struct xfs_mount	*mp,
+	struct xfs_trans	*tp,
+	xfs_agnumber_t		agno,
+	xfs_agblock_t		agbno,
+	xfs_agblock_t		length,
+	unsigned int		gen)
+{
+	struct xfs_buf		*fbuf;
+	struct xfs_dinode	*free;
+	int			blks_per_cluster, nbufs, ninodes;
+	int			version;
+	int			i, j;
+	xfs_daddr_t		d;
+
+	/*
+	 * Loop over the new block(s), filling in the inodes.
+	 * For small block sizes, manipulate the inodes in buffers
+	 * which are multiples of the blocks size.
+	 */
+	if (mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(mp)) {
+		blks_per_cluster = 1;
+		nbufs = length;
+		ninodes = mp->m_sb.sb_inopblock;
+	} else {
+		blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) /
+				   mp->m_sb.sb_blocksize;
+		nbufs = length / blks_per_cluster;
+		ninodes = blks_per_cluster * mp->m_sb.sb_inopblock;
+	}
+
+	/*
+	 * Figure out what version number to use in the inodes we create.
+	 * If the superblock version has caught up to the one that supports
+	 * the new inode format, then use the new inode version.  Otherwise
+	 * use the old version so that old kernels will continue to be
+	 * able to use the file system.
+	 */
+	if (xfs_sb_version_hasnlink(&mp->m_sb))
+		version = 2;
+	else
+		version = 1;
+
+	for (j = 0; j < nbufs; j++) {
+		/*
+		 * Get the block.
+		 */
+		d = XFS_AGB_TO_DADDR(mp, agno, agbno + (j * blks_per_cluster));
+		fbuf = xfs_trans_get_buf(tp, mp->m_ddev_targp, d,
+					 mp->m_bsize * blks_per_cluster,
+					 XFS_BUF_LOCK);
+		ASSERT(fbuf);
+		ASSERT(!XFS_BUF_GETERROR(fbuf));
+
+		/*
+		 * Initialize all inodes in this buffer and then log them.
+		 *
+		 * XXX: It would be much better if we had just one transaction
+		 *	to log a whole cluster of inodes instead of all the
+		 *	individual transactions causing a lot of log traffic.
+		 */
+		xfs_biozero(fbuf, 0, ninodes << mp->m_sb.sb_inodelog);
+		for (i = 0; i < ninodes; i++) {
+			int	ioffset = i << mp->m_sb.sb_inodelog;
+			uint	isize = sizeof(struct xfs_dinode);
+
+			free = xfs_make_iptr(mp, fbuf, i);
+			free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
+			free->di_version = version;
+			free->di_gen = cpu_to_be32(gen);
+			free->di_next_unlinked = cpu_to_be32(NULLAGINO);
+			xfs_trans_log_buf(tp, fbuf, ioffset, ioffset + isize - 1);
+		}
+		xfs_trans_inode_alloc_buf(tp, fbuf);
+	}
+}
+
+/*
  * Allocate new inodes in the allocation group specified by agbp.
  * Return 0 for success, else error code.
  */
@@ -164,24 +244,15 @@ xfs_ialloc_ag_alloc(
 {
 	xfs_agi_t	*agi;		/* allocation group header */
 	xfs_alloc_arg_t	args;		/* allocation argument structure */
-	int		blks_per_cluster;  /* fs blocks per inode cluster */
 	xfs_btree_cur_t	*cur;		/* inode btree cursor */
-	xfs_daddr_t	d;		/* disk addr of buffer */
 	xfs_agnumber_t	agno;
 	int		error;
-	xfs_buf_t	*fbuf;		/* new free inodes' buffer */
-	xfs_dinode_t	*free;		/* new free inode structure */
-	int		i;		/* inode counter */
-	int		j;		/* block counter */
-	int		nbufs;		/* num bufs of new inodes */
+	int		i;
 	xfs_agino_t	newino;		/* new first inode's number */
 	xfs_agino_t	newlen;		/* new number of inodes */
-	int		ninodes;	/* num inodes per buf */
 	xfs_agino_t	thisino;	/* current inode number, for loop */
-	int		version;	/* inode version number to use */
 	int		isaligned = 0;	/* inode allocation at stripe unit */
 					/* boundary */
-	unsigned int	gen;
 
 	args.tp = tp;
 	args.mp = tp->t_mountp;
@@ -202,12 +273,12 @@ xfs_ialloc_ag_alloc(
  	 */
 	agi = XFS_BUF_TO_AGI(agbp);
 	newino = be32_to_cpu(agi->agi_newino);
+	agno = be32_to_cpu(agi->agi_seqno);
 	args.agbno = XFS_AGINO_TO_AGBNO(args.mp, newino) +
 			XFS_IALLOC_BLOCKS(args.mp);
 	if (likely(newino != NULLAGINO &&
 		  (args.agbno < be32_to_cpu(agi->agi_length)))) {
-		args.fsbno = XFS_AGB_TO_FSB(args.mp,
-				be32_to_cpu(agi->agi_seqno), args.agbno);
+		args.fsbno = XFS_AGB_TO_FSB(args.mp, agno, args.agbno);
 		args.type = XFS_ALLOCTYPE_THIS_BNO;
 		args.mod = args.total = args.wasdel = args.isfl =
 			args.userdata = args.minalignslop = 0;
@@ -258,8 +329,7 @@ xfs_ialloc_ag_alloc(
 		 * For now, just allocate blocks up front.
 		 */
 		args.agbno = be32_to_cpu(agi->agi_root);
-		args.fsbno = XFS_AGB_TO_FSB(args.mp,
-				be32_to_cpu(agi->agi_seqno), args.agbno);
+		args.fsbno = XFS_AGB_TO_FSB(args.mp, agno, args.agbno);
 		/*
 		 * Allocate a fixed-size extent of inodes.
 		 */
@@ -282,8 +352,7 @@ xfs_ialloc_ag_alloc(
 	if (isaligned && args.fsbno == NULLFSBLOCK) {
 		args.type = XFS_ALLOCTYPE_NEAR_BNO;
 		args.agbno = be32_to_cpu(agi->agi_root);
-		args.fsbno = XFS_AGB_TO_FSB(args.mp,
-				be32_to_cpu(agi->agi_seqno), args.agbno);
+		args.fsbno = XFS_AGB_TO_FSB(args.mp, agno, args.agbno);
 		args.alignment = xfs_ialloc_cluster_alignment(&args);
 		if ((error = xfs_alloc_vextent(&args)))
 			return error;
@@ -294,85 +363,30 @@ xfs_ialloc_ag_alloc(
 		return 0;
 	}
 	ASSERT(args.len == args.minlen);
-	/*
-	 * Convert the results.
-	 */
-	newino = XFS_OFFBNO_TO_AGINO(args.mp, args.agbno, 0);
-	/*
-	 * Loop over the new block(s), filling in the inodes.
-	 * For small block sizes, manipulate the inodes in buffers
-	 * which are multiples of the blocks size.
-	 */
-	if (args.mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(args.mp)) {
-		blks_per_cluster = 1;
-		nbufs = (int)args.len;
-		ninodes = args.mp->m_sb.sb_inopblock;
-	} else {
-		blks_per_cluster = XFS_INODE_CLUSTER_SIZE(args.mp) /
-				   args.mp->m_sb.sb_blocksize;
-		nbufs = (int)args.len / blks_per_cluster;
-		ninodes = blks_per_cluster * args.mp->m_sb.sb_inopblock;
-	}
-	/*
-	 * Figure out what version number to use in the inodes we create.
-	 * If the superblock version has caught up to the one that supports
-	 * the new inode format, then use the new inode version.  Otherwise
-	 * use the old version so that old kernels will continue to be
-	 * able to use the file system.
-	 */
-	if (xfs_sb_version_hasnlink(&args.mp->m_sb))
-		version = 2;
-	else
-		version = 1;
 
 	/*
+	 * Stamp and write the inode buffers.
+	 *
 	 * Seed the new inode cluster with a random generation number. This
 	 * prevents short-term reuse of generation numbers if a chunk is
 	 * freed and then immediately reallocated. We use random numbers
 	 * rather than a linear progression to prevent the next generation
 	 * number from being easily guessable.
 	 */
-	gen = random32();
-	for (j = 0; j < nbufs; j++) {
-		/*
-		 * Get the block.
-		 */
-		d = XFS_AGB_TO_DADDR(args.mp, be32_to_cpu(agi->agi_seqno),
-				     args.agbno + (j * blks_per_cluster));
-		fbuf = xfs_trans_get_buf(tp, args.mp->m_ddev_targp, d,
-					 args.mp->m_bsize * blks_per_cluster,
-					 XFS_BUF_LOCK);
-		ASSERT(fbuf);
-		ASSERT(!XFS_BUF_GETERROR(fbuf));
+	xfs_ialloc_inode_init(args.mp, tp, agno, args.agbno, args.len,
+			      random32());
 
-		/*
-		 * Initialize all inodes in this buffer and then log them.
-		 *
-		 * XXX: It would be much better if we had just one transaction to
-		 *      log a whole cluster of inodes instead of all the individual
-		 *      transactions causing a lot of log traffic.
-		 */
-		xfs_biozero(fbuf, 0, ninodes << args.mp->m_sb.sb_inodelog);
-		for (i = 0; i < ninodes; i++) {
-			int	ioffset = i << args.mp->m_sb.sb_inodelog;
-			uint	isize = sizeof(struct xfs_dinode);
-
-			free = xfs_make_iptr(args.mp, fbuf, i);
-			free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
-			free->di_version = version;
-			free->di_gen = cpu_to_be32(gen);
-			free->di_next_unlinked = cpu_to_be32(NULLAGINO);
-			xfs_trans_log_buf(tp, fbuf, ioffset, ioffset + isize - 1);
-		}
-		xfs_trans_inode_alloc_buf(tp, fbuf);
-	}
+	/*
+	 * Convert the results.
+	 */
+	newino = XFS_OFFBNO_TO_AGINO(args.mp, args.agbno, 0);
 	be32_add_cpu(&agi->agi_count, newlen);
 	be32_add_cpu(&agi->agi_freecount, newlen);
-	agno = be32_to_cpu(agi->agi_seqno);
 	down_read(&args.mp->m_peraglock);
 	args.mp->m_perag[agno].pagi_freecount += newlen;
 	up_read(&args.mp->m_peraglock);
 	agi->agi_newino = cpu_to_be32(newino);
+
 	/*
 	 * Insert records describing the new inode chunk into the btree.
 	 */
@@ -380,13 +394,17 @@ xfs_ialloc_ag_alloc(
 	for (thisino = newino;
 	     thisino < newino + newlen;
 	     thisino += XFS_INODES_PER_CHUNK) {
-		if ((error = xfs_inobt_lookup_eq(cur, thisino,
-				XFS_INODES_PER_CHUNK, XFS_INOBT_ALL_FREE, &i))) {
+		cur->bc_rec.i.ir_startino = thisino;
+		cur->bc_rec.i.ir_freecount = XFS_INODES_PER_CHUNK;
+		cur->bc_rec.i.ir_free = XFS_INOBT_ALL_FREE;
+		error = xfs_btree_lookup(cur, XFS_LOOKUP_EQ, &i);
+		if (error) {
 			xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
 			return error;
 		}
 		ASSERT(i == 0);
-		if ((error = xfs_btree_insert(cur, &i))) {
+		error = xfs_btree_insert(cur, &i);
+		if (error) {
 			xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
 			return error;
 		}
@@ -539,6 +557,62 @@ nextag:
 }
 
 /*
+ * Try to retrieve the next record to the left/right from the current one.
+ */
+STATIC int
+xfs_ialloc_next_rec(
+	struct xfs_btree_cur	*cur,
+	xfs_inobt_rec_incore_t	*rec,
+	int			*done,
+	int			left)
+{
+	int                     error;
+	int			i;
+
+	if (left)
+		error = xfs_btree_decrement(cur, 0, &i);
+	else
+		error = xfs_btree_increment(cur, 0, &i);
+
+	if (error)
+		return error;
+	*done = !i;
+	if (i) {
+		error = xfs_inobt_get_rec(cur, rec, &i);
+		if (error)
+			return error;
+		XFS_WANT_CORRUPTED_RETURN(i == 1);
+	}
+
+	return 0;
+}
+
+STATIC int
+xfs_ialloc_get_rec(
+	struct xfs_btree_cur	*cur,
+	xfs_agino_t		agino,
+	xfs_inobt_rec_incore_t	*rec,
+	int			*done,
+	int			left)
+{
+	int                     error;
+	int			i;
+
+	error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_EQ, &i);
+	if (error)
+		return error;
+	*done = !i;
+	if (i) {
+		error = xfs_inobt_get_rec(cur, rec, &i);
+		if (error)
+			return error;
+		XFS_WANT_CORRUPTED_RETURN(i == 1);
+	}
+
+	return 0;
+}
+
+/*
  * Visible inode allocation functions.
  */
 
@@ -592,8 +666,8 @@ xfs_dialloc(
 	int		j;		/* result code */
 	xfs_mount_t	*mp;		/* file system mount structure */
 	int		offset;		/* index of inode in chunk */
-	xfs_agino_t	pagino;		/* parent's a.g. relative inode # */
-	xfs_agnumber_t	pagno;		/* parent's allocation group number */
+	xfs_agino_t	pagino;		/* parent's AG relative inode # */
+	xfs_agnumber_t	pagno;		/* parent's AG number */
 	xfs_inobt_rec_incore_t rec;	/* inode allocation record */
 	xfs_agnumber_t	tagno;		/* testing allocation group number */
 	xfs_btree_cur_t	*tcur;		/* temp cursor */
@@ -716,6 +790,8 @@ nextag:
 	 */
 	agno = tagno;
 	*IO_agbp = NULL;
+
+ restart_pagno:
 	cur = xfs_inobt_init_cursor(mp, tp, agbp, be32_to_cpu(agi->agi_seqno));
 	/*
 	 * If pagino is 0 (this is the root inode allocation) use newino.
@@ -723,220 +799,199 @@ nextag:
 	 */
 	if (!pagino)
 		pagino = be32_to_cpu(agi->agi_newino);
-#ifdef DEBUG
-	if (cur->bc_nlevels == 1) {
-		int	freecount = 0;
 
-		if ((error = xfs_inobt_lookup_ge(cur, 0, 0, 0, &i)))
-			goto error0;
-		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
-		do {
-			if ((error = xfs_inobt_get_rec(cur, &rec.ir_startino,
-					&rec.ir_freecount, &rec.ir_free, &i)))
-				goto error0;
-			XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
-			freecount += rec.ir_freecount;
-			if ((error = xfs_btree_increment(cur, 0, &i)))
-				goto error0;
-		} while (i == 1);
+	error = xfs_check_agi_freecount(cur, agi);
+	if (error)
+		goto error0;
 
-		ASSERT(freecount == be32_to_cpu(agi->agi_freecount) ||
-		       XFS_FORCED_SHUTDOWN(mp));
-	}
-#endif
 	/*
-	 * If in the same a.g. as the parent, try to get near the parent.
+	 * If in the same AG as the parent, try to get near the parent.
 	 */
 	if (pagno == agno) {
-		if ((error = xfs_inobt_lookup_le(cur, pagino, 0, 0, &i)))
+		xfs_perag_t	*pag = &mp->m_perag[agno];
+		int		doneleft;	/* done, to the left */
+		int		doneright;	/* done, to the right */
+		int		searchdistance = 10;
+
+		error = xfs_inobt_lookup(cur, pagino, XFS_LOOKUP_LE, &i);
+		if (error)
+			goto error0;
+		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
+
+		error = xfs_inobt_get_rec(cur, &rec, &j);
+		if (error)
 			goto error0;
-		if (i != 0 &&
-		    (error = xfs_inobt_get_rec(cur, &rec.ir_startino,
-			    &rec.ir_freecount, &rec.ir_free, &j)) == 0 &&
-		    j == 1 &&
-		    rec.ir_freecount > 0) {
+		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
+
+		if (rec.ir_freecount > 0) {
 			/*
 			 * Found a free inode in the same chunk
-			 * as parent, done.
+			 * as the parent, done.
 			 */
+			goto alloc_inode;
 		}
+
+
+		/*
+		 * In the same AG as parent, but parent's chunk is full.
+		 */
+
+		/* duplicate the cursor, search left & right simultaneously */
+		error = xfs_btree_dup_cursor(cur, &tcur);
+		if (error)
+			goto error0;
+
 		/*
-		 * In the same a.g. as parent, but parent's chunk is full.
+		 * Skip to last blocks looked up if same parent inode.
 		 */
-		else {
-			int	doneleft;	/* done, to the left */
-			int	doneright;	/* done, to the right */
+		if (pagino != NULLAGINO &&
+		    pag->pagl_pagino == pagino &&
+		    pag->pagl_leftrec != NULLAGINO &&
+		    pag->pagl_rightrec != NULLAGINO) {
+			error = xfs_ialloc_get_rec(tcur, pag->pagl_leftrec,
+						   &trec, &doneleft, 1);
+			if (error)
+				goto error1;
 
+			error = xfs_ialloc_get_rec(cur, pag->pagl_rightrec,
+						   &rec, &doneright, 0);
 			if (error)
-				goto error0;
-			ASSERT(i == 1);
-			ASSERT(j == 1);
-			/*
-			 * Duplicate the cursor, search left & right
-			 * simultaneously.
-			 */
-			if ((error = xfs_btree_dup_cursor(cur, &tcur)))
-				goto error0;
-			/*
-			 * Search left with tcur, back up 1 record.
-			 */
-			if ((error = xfs_btree_decrement(tcur, 0, &i)))
 				goto error1;
-			doneleft = !i;
-			if (!doneleft) {
-				if ((error = xfs_inobt_get_rec(tcur,
-						&trec.ir_startino,
-						&trec.ir_freecount,
-						&trec.ir_free, &i)))
-					goto error1;
-				XFS_WANT_CORRUPTED_GOTO(i == 1, error1);
-			}
-			/*
-			 * Search right with cur, go forward 1 record.
-			 */
-			if ((error = xfs_btree_increment(cur, 0, &i)))
+		} else {
+			/* search left with tcur, back up 1 record */
+			error = xfs_ialloc_next_rec(tcur, &trec, &doneleft, 1);
+			if (error)
 				goto error1;
-			doneright = !i;
-			if (!doneright) {
-				if ((error = xfs_inobt_get_rec(cur,
-						&rec.ir_startino,
-						&rec.ir_freecount,
-						&rec.ir_free, &i)))
-					goto error1;
-				XFS_WANT_CORRUPTED_GOTO(i == 1, error1);
-			}
-			/*
-			 * Loop until we find the closest inode chunk
-			 * with a free one.
-			 */
-			while (!doneleft || !doneright) {
-				int	useleft;  /* using left inode
-						     chunk this time */
 
+			/* search right with cur, go forward 1 record. */
+			error = xfs_ialloc_next_rec(cur, &rec, &doneright, 0);
+			if (error)
+				goto error1;
+		}
+
+		/*
+		 * Loop until we find an inode chunk with a free inode.
+		 */
+		while (!doneleft || !doneright) {
+			int	useleft;  /* using left inode chunk this time */
+
+			if (!--searchdistance) {
 				/*
-				 * Figure out which block is closer,
-				 * if both are valid.
-				 */
-				if (!doneleft && !doneright)
-					useleft =
-						pagino -
-						(trec.ir_startino +
-						 XFS_INODES_PER_CHUNK - 1) <
-						 rec.ir_startino - pagino;
-				else
-					useleft = !doneleft;
-				/*
-				 * If checking the left, does it have
-				 * free inodes?
-				 */
-				if (useleft && trec.ir_freecount) {
-					/*
-					 * Yes, set it up as the chunk to use.
-					 */
-					rec = trec;
-					xfs_btree_del_cursor(cur,
-						XFS_BTREE_NOERROR);
-					cur = tcur;
-					break;
-				}
-				/*
-				 * If checking the right, does it have
-				 * free inodes?
-				 */
-				if (!useleft && rec.ir_freecount) {
-					/*
-					 * Yes, it's already set up.
-					 */
-					xfs_btree_del_cursor(tcur,
-						XFS_BTREE_NOERROR);
-					break;
-				}
-				/*
-				 * If used the left, get another one
-				 * further left.
-				 */
-				if (useleft) {
-					if ((error = xfs_btree_decrement(tcur, 0,
-							&i)))
-						goto error1;
-					doneleft = !i;
-					if (!doneleft) {
-						if ((error = xfs_inobt_get_rec(
-							    tcur,
-							    &trec.ir_startino,
-							    &trec.ir_freecount,
-							    &trec.ir_free, &i)))
-							goto error1;
-						XFS_WANT_CORRUPTED_GOTO(i == 1,
-							error1);
-					}
-				}
-				/*
-				 * If used the right, get another one
-				 * further right.
+				 * Not in range - save last search
+				 * location and allocate a new inode
 				 */
-				else {
-					if ((error = xfs_btree_increment(cur, 0,
-							&i)))
-						goto error1;
-					doneright = !i;
-					if (!doneright) {
-						if ((error = xfs_inobt_get_rec(
-							    cur,
-							    &rec.ir_startino,
-							    &rec.ir_freecount,
-							    &rec.ir_free, &i)))
-							goto error1;
-						XFS_WANT_CORRUPTED_GOTO(i == 1,
-							error1);
-					}
-				}
+				pag->pagl_leftrec = trec.ir_startino;
+				pag->pagl_rightrec = rec.ir_startino;
+				pag->pagl_pagino = pagino;
+				goto newino;
+			}
+
+			/* figure out the closer block if both are valid. */
+			if (!doneleft && !doneright) {
+				useleft = pagino -
+				 (trec.ir_startino + XFS_INODES_PER_CHUNK - 1) <
+				  rec.ir_startino - pagino;
+			} else {
+				useleft = !doneleft;
 			}
-			ASSERT(!doneleft || !doneright);
+
+			/* free inodes to the left? */
+			if (useleft && trec.ir_freecount) {
+				rec = trec;
+				xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+				cur = tcur;
+
+				pag->pagl_leftrec = trec.ir_startino;
+				pag->pagl_rightrec = rec.ir_startino;
+				pag->pagl_pagino = pagino;
+				goto alloc_inode;
+			}
+
+			/* free inodes to the right? */
+			if (!useleft && rec.ir_freecount) {
+				xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR);
+
+				pag->pagl_leftrec = trec.ir_startino;
+				pag->pagl_rightrec = rec.ir_startino;
+				pag->pagl_pagino = pagino;
+				goto alloc_inode;
+			}
+
+			/* get next record to check */
+			if (useleft) {
+				error = xfs_ialloc_next_rec(tcur, &trec,
+								 &doneleft, 1);
+			} else {
+				error = xfs_ialloc_next_rec(cur, &rec,
+								 &doneright, 0);
+			}
+			if (error)
+				goto error1;
 		}
+
+		/*
+		 * We've reached the end of the btree. because
+		 * we are only searching a small chunk of the
+		 * btree each search, there is obviously free
+		 * inodes closer to the parent inode than we
+		 * are now. restart the search again.
+		 */
+		pag->pagl_pagino = NULLAGINO;
+		pag->pagl_leftrec = NULLAGINO;
+		pag->pagl_rightrec = NULLAGINO;
+		xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR);
+		xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
+		goto restart_pagno;
 	}
+
 	/*
-	 * In a different a.g. from the parent.
+	 * In a different AG from the parent.
 	 * See if the most recently allocated block has any free.
 	 */
-	else if (be32_to_cpu(agi->agi_newino) != NULLAGINO) {
-		if ((error = xfs_inobt_lookup_eq(cur,
-				be32_to_cpu(agi->agi_newino), 0, 0, &i)))
+newino:
+	if (be32_to_cpu(agi->agi_newino) != NULLAGINO) {
+		error = xfs_inobt_lookup(cur, be32_to_cpu(agi->agi_newino),
+					 XFS_LOOKUP_EQ, &i);
+		if (error)
 			goto error0;
-		if (i == 1 &&
-		    (error = xfs_inobt_get_rec(cur, &rec.ir_startino,
-			    &rec.ir_freecount, &rec.ir_free, &j)) == 0 &&
-		    j == 1 &&
-		    rec.ir_freecount > 0) {
-			/*
-			 * The last chunk allocated in the group still has
-			 * a free inode.
-			 */
-		}
-		/*
-		 * None left in the last group, search the whole a.g.
-		 */
-		else {
+
+		if (i == 1) {
+			error = xfs_inobt_get_rec(cur, &rec, &j);
 			if (error)
 				goto error0;
-			if ((error = xfs_inobt_lookup_ge(cur, 0, 0, 0, &i)))
-				goto error0;
-			ASSERT(i == 1);
-			for (;;) {
-				if ((error = xfs_inobt_get_rec(cur,
-						&rec.ir_startino,
-						&rec.ir_freecount, &rec.ir_free,
-						&i)))
-					goto error0;
-				XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
-				if (rec.ir_freecount > 0)
-					break;
-				if ((error = xfs_btree_increment(cur, 0, &i)))
-					goto error0;
-				XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
+
+			if (j == 1 && rec.ir_freecount > 0) {
+				/*
+				 * The last chunk allocated in the group
+				 * still has a free inode.
+				 */
+				goto alloc_inode;
 			}
 		}
 	}
+
+	/*
+	 * None left in the last group, search the whole AG
+	 */
+	error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &i);
+	if (error)
+		goto error0;
+	XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
+
+	for (;;) {
+		error = xfs_inobt_get_rec(cur, &rec, &i);
+		if (error)
+			goto error0;
+		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
+		if (rec.ir_freecount > 0)
+			break;
+		error = xfs_btree_increment(cur, 0, &i);
+		if (error)
+			goto error0;
+		XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
+	}
+
+alloc_inode:
 	offset = xfs_ialloc_find_free(&rec.ir_free);
 	ASSERT(offset >= 0);
 	ASSERT(offset < XFS_INODES_PER_CHUNK);
@@ -945,33 +1000,19 @@ nextag:
 	ino = XFS_AGINO_TO_INO(mp, agno, rec.ir_startino + offset);
 	rec.ir_free &= ~XFS_INOBT_MASK(offset);
 	rec.ir_freecount--;
-	if ((error = xfs_inobt_update(cur, rec.ir_startino, rec.ir_freecount,
-			rec.ir_free)))
+	error = xfs_inobt_update(cur, &rec);
+	if (error)
 		goto error0;
 	be32_add_cpu(&agi->agi_freecount, -1);
 	xfs_ialloc_log_agi(tp, agbp, XFS_AGI_FREECOUNT);
 	down_read(&mp->m_peraglock);
 	mp->m_perag[tagno].pagi_freecount--;
 	up_read(&mp->m_peraglock);
-#ifdef DEBUG
-	if (cur->bc_nlevels == 1) {
-		int	freecount = 0;
 
-		if ((error = xfs_inobt_lookup_ge(cur, 0, 0, 0, &i)))
-			goto error0;
-		do {
-			if ((error = xfs_inobt_get_rec(cur, &rec.ir_startino,
-					&rec.ir_freecount, &rec.ir_free, &i)))
-				goto error0;
-			XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
-			freecount += rec.ir_freecount;
-			if ((error = xfs_btree_increment(cur, 0, &i)))
-				goto error0;
-		} while (i == 1);
-		ASSERT(freecount == be32_to_cpu(agi->agi_freecount) ||
-		       XFS_FORCED_SHUTDOWN(mp));
-	}
-#endif
+	error = xfs_check_agi_freecount(cur, agi);
+	if (error)
+		goto error0;
+
 	xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
 	xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, -1);
 	*inop = ino;
@@ -1062,38 +1103,23 @@ xfs_difree(
 	 * Initialize the cursor.
 	 */
 	cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
-#ifdef DEBUG
-	if (cur->bc_nlevels == 1) {
-		int freecount = 0;
 
-		if ((error = xfs_inobt_lookup_ge(cur, 0, 0, 0, &i)))
-			goto error0;
-		do {
-			if ((error = xfs_inobt_get_rec(cur, &rec.ir_startino,
-					&rec.ir_freecount, &rec.ir_free, &i)))
-				goto error0;
-			if (i) {
-				freecount += rec.ir_freecount;
-				if ((error = xfs_btree_increment(cur, 0, &i)))
-					goto error0;
-			}
-		} while (i == 1);
-		ASSERT(freecount == be32_to_cpu(agi->agi_freecount) ||
-		       XFS_FORCED_SHUTDOWN(mp));
-	}
-#endif
+	error = xfs_check_agi_freecount(cur, agi);
+	if (error)
+		goto error0;
+
 	/*
 	 * Look for the entry describing this inode.
 	 */
-	if ((error = xfs_inobt_lookup_le(cur, agino, 0, 0, &i))) {
+	if ((error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &i))) {
 		cmn_err(CE_WARN,
-			"xfs_difree: xfs_inobt_lookup_le returned()  an error %d on %s.  Returning error.",
+			"xfs_difree: xfs_inobt_lookup returned()  an error %d on %s.  Returning error.",
 			error, mp->m_fsname);
 		goto error0;
 	}
 	XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
-	if ((error = xfs_inobt_get_rec(cur, &rec.ir_startino, &rec.ir_freecount,
-			&rec.ir_free, &i))) {
+	error = xfs_inobt_get_rec(cur, &rec, &i);
+	if (error) {
 		cmn_err(CE_WARN,
 			"xfs_difree: xfs_inobt_get_rec()  returned an error %d on %s.  Returning error.",
 			error, mp->m_fsname);
@@ -1148,12 +1174,14 @@ xfs_difree(
 	} else {
 		*delete = 0;
 
-		if ((error = xfs_inobt_update(cur, rec.ir_startino, rec.ir_freecount, rec.ir_free))) {
+		error = xfs_inobt_update(cur, &rec);
+		if (error) {
 			cmn_err(CE_WARN,
-				"xfs_difree: xfs_inobt_update()  returned an error %d on %s.  Returning error.",
+	"xfs_difree: xfs_inobt_update returned an error %d on %s.",
 				error, mp->m_fsname);
 			goto error0;
 		}
+
 		/* 
 		 * Change the inode free counts and log the ag/sb changes.
 		 */
@@ -1165,28 +1193,10 @@ xfs_difree(
 		xfs_trans_mod_sb(tp, XFS_TRANS_SB_IFREE, 1);
 	}
 
-#ifdef DEBUG
-	if (cur->bc_nlevels == 1) {
-		int freecount = 0;
+	error = xfs_check_agi_freecount(cur, agi);
+	if (error)
+		goto error0;
 
-		if ((error = xfs_inobt_lookup_ge(cur, 0, 0, 0, &i)))
-			goto error0;
-		do {
-			if ((error = xfs_inobt_get_rec(cur,
-					&rec.ir_startino,
-					&rec.ir_freecount,
-					&rec.ir_free, &i)))
-				goto error0;
-			if (i) {
-				freecount += rec.ir_freecount;
-				if ((error = xfs_btree_increment(cur, 0, &i)))
-					goto error0;
-			}
-		} while (i == 1);
-		ASSERT(freecount == be32_to_cpu(agi->agi_freecount) ||
-		       XFS_FORCED_SHUTDOWN(mp));
-	}
-#endif
 	xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
 	return 0;
 
@@ -1297,9 +1307,7 @@ xfs_imap(
 		chunk_agbno = agbno - offset_agbno;
 	} else {
 		xfs_btree_cur_t	*cur;	/* inode btree cursor */
-		xfs_agino_t	chunk_agino; /* first agino in inode chunk */
-		__int32_t	chunk_cnt; /* count of free inodes in chunk */
-		xfs_inofree_t	chunk_free; /* mask of free inodes in chunk */
+		xfs_inobt_rec_incore_t chunk_rec;
 		xfs_buf_t	*agbp;	/* agi buffer */
 		int		i;	/* temp state */
 
@@ -1315,15 +1323,14 @@ xfs_imap(
 		}
 
 		cur = xfs_inobt_init_cursor(mp, tp, agbp, agno);
-		error = xfs_inobt_lookup_le(cur, agino, 0, 0, &i);
+		error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE, &i);
 		if (error) {
 			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
-					"xfs_inobt_lookup_le() failed");
+					"xfs_inobt_lookup() failed");
 			goto error0;
 		}
 
-		error = xfs_inobt_get_rec(cur, &chunk_agino, &chunk_cnt,
-				&chunk_free, &i);
+		error = xfs_inobt_get_rec(cur, &chunk_rec, &i);
 		if (error) {
 			xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
 					"xfs_inobt_get_rec() failed");
@@ -1341,7 +1348,7 @@ xfs_imap(
 		xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
 		if (error)
 			return error;
-		chunk_agbno = XFS_AGINO_TO_AGBNO(mp, chunk_agino);
+		chunk_agbno = XFS_AGINO_TO_AGBNO(mp, chunk_rec.ir_startino);
 		offset_agbno = agbno - chunk_agbno;
 	}
 
diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h
index aeee8278f92c..bb5385475e1f 100644
--- a/fs/xfs/xfs_ialloc.h
+++ b/fs/xfs/xfs_ialloc.h
@@ -150,23 +150,15 @@ xfs_ialloc_pagi_init(
         xfs_agnumber_t  agno);		/* allocation group number */
 
 /*
- * Lookup the first record greater than or equal to ino
- * in the btree given by cur.
+ * Lookup a record by ino in the btree given by cur.
  */
-int xfs_inobt_lookup_ge(struct xfs_btree_cur *cur, xfs_agino_t ino,
-		__int32_t fcnt,	xfs_inofree_t free, int *stat);
-
-/*
- * Lookup the first record less than or equal to ino
- * in the btree given by cur.
- */
-int xfs_inobt_lookup_le(struct xfs_btree_cur *cur, xfs_agino_t ino,
-		__int32_t fcnt,	xfs_inofree_t free, int *stat);
+int xfs_inobt_lookup(struct xfs_btree_cur *cur, xfs_agino_t ino,
+		xfs_lookup_t dir, int *stat);
 
 /*
  * Get the data from the pointed-to record.
  */
-extern int xfs_inobt_get_rec(struct xfs_btree_cur *cur, xfs_agino_t *ino,
-			     __int32_t *fcnt, xfs_inofree_t *free, int *stat);
+extern int xfs_inobt_get_rec(struct xfs_btree_cur *cur,
+		xfs_inobt_rec_incore_t *rec, int *stat);
 
 #endif	/* __XFS_IALLOC_H__ */
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index ecbf8b4d2e2e..80e526489be5 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -82,7 +82,6 @@ xfs_inode_alloc(
 	memset(&ip->i_df, 0, sizeof(xfs_ifork_t));
 	ip->i_flags = 0;
 	ip->i_update_core = 0;
-	ip->i_update_size = 0;
 	ip->i_delayed_blks = 0;
 	memset(&ip->i_d, 0, sizeof(xfs_icdinode_t));
 	ip->i_size = 0;
@@ -456,32 +455,6 @@ out_error_or_again:
 	return error;
 }
 
-
-/*
- * Look for the inode corresponding to the given ino in the hash table.
- * If it is there and its i_transp pointer matches tp, return it.
- * Otherwise, return NULL.
- */
-xfs_inode_t *
-xfs_inode_incore(xfs_mount_t	*mp,
-		 xfs_ino_t	ino,
-		 xfs_trans_t	*tp)
-{
-	xfs_inode_t	*ip;
-	xfs_perag_t	*pag;
-
-	pag = xfs_get_perag(mp, ino);
-	read_lock(&pag->pag_ici_lock);
-	ip = radix_tree_lookup(&pag->pag_ici_root, XFS_INO_TO_AGINO(mp, ino));
-	read_unlock(&pag->pag_ici_lock);
-	xfs_put_perag(mp, pag);
-
-	/* the returned inode must match the transaction */
-	if (ip && (ip->i_transp != tp))
-		return NULL;
-	return ip;
-}
-
 /*
  * Decrement reference count of an inode structure and unlock it.
  *
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index da428b3fe0f5..c1dc7ef5a1d8 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -651,7 +651,7 @@ xfs_iformat_btree(
 	return 0;
 }
 
-void
+STATIC void
 xfs_dinode_from_disk(
 	xfs_icdinode_t		*to,
 	xfs_dinode_t		*from)
@@ -1247,7 +1247,7 @@ xfs_isize_check(
  * In that case the pages will still be in memory, but the inode size
  * will never have been updated.
  */
-xfs_fsize_t
+STATIC xfs_fsize_t
 xfs_file_last_byte(
 	xfs_inode_t	*ip)
 {
@@ -3837,7 +3837,7 @@ xfs_iext_inline_to_direct(
 /*
  * Resize an extent indirection array to new_size bytes.
  */
-void
+STATIC void
 xfs_iext_realloc_indirect(
 	xfs_ifork_t	*ifp,		/* inode fork pointer */
 	int		new_size)	/* new indirection array size */
@@ -3862,7 +3862,7 @@ xfs_iext_realloc_indirect(
 /*
  * Switch from indirection array to linear (direct) extent allocations.
  */
-void
+STATIC void
 xfs_iext_indirect_to_direct(
 	 xfs_ifork_t	*ifp)		/* inode fork pointer */
 {
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 65f24a3cc992..0b38b9a869ec 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -261,7 +261,6 @@ typedef struct xfs_inode {
 	/* Miscellaneous state. */
 	unsigned short		i_flags;	/* see defined flags below */
 	unsigned char		i_update_core;	/* timestamps/size is dirty */
-	unsigned char		i_update_size;	/* di_size field is dirty */
 	unsigned int		i_delayed_blks;	/* count of delay alloc blks */
 
 	xfs_icdinode_t		i_d;		/* most of ondisk inode */
@@ -468,8 +467,6 @@ static inline void xfs_ifunlock(xfs_inode_t *ip)
 /*
  * xfs_iget.c prototypes.
  */
-xfs_inode_t	*xfs_inode_incore(struct xfs_mount *, xfs_ino_t,
-				  struct xfs_trans *);
 int		xfs_iget(struct xfs_mount *, struct xfs_trans *, xfs_ino_t,
 			 uint, uint, xfs_inode_t **, xfs_daddr_t);
 void		xfs_iput(xfs_inode_t *, uint);
@@ -504,7 +501,6 @@ void		xfs_ipin(xfs_inode_t *);
 void		xfs_iunpin(xfs_inode_t *);
 int		xfs_iflush(xfs_inode_t *, uint);
 void		xfs_ichgtime(xfs_inode_t *, int);
-xfs_fsize_t	xfs_file_last_byte(xfs_inode_t *);
 void		xfs_lock_inodes(xfs_inode_t **, int, uint);
 void		xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint);
 
@@ -572,8 +568,6 @@ int		xfs_itobp(struct xfs_mount *, struct xfs_trans *,
 			  struct xfs_buf **, uint);
 int		xfs_iread(struct xfs_mount *, struct xfs_trans *,
 			  struct xfs_inode *, xfs_daddr_t, uint);
-void		xfs_dinode_from_disk(struct xfs_icdinode *,
-				     struct xfs_dinode *);
 void		xfs_dinode_to_disk(struct xfs_dinode *,
 				   struct xfs_icdinode *);
 void		xfs_idestroy_fork(struct xfs_inode *, int);
@@ -592,8 +586,6 @@ void		xfs_iext_remove_inline(xfs_ifork_t *, xfs_extnum_t, int);
 void		xfs_iext_remove_direct(xfs_ifork_t *, xfs_extnum_t, int);
 void		xfs_iext_remove_indirect(xfs_ifork_t *, xfs_extnum_t, int);
 void		xfs_iext_realloc_direct(xfs_ifork_t *, int);
-void		xfs_iext_realloc_indirect(xfs_ifork_t *, int);
-void		xfs_iext_indirect_to_direct(xfs_ifork_t *);
 void		xfs_iext_direct_to_inline(xfs_ifork_t *, xfs_extnum_t);
 void		xfs_iext_inline_to_direct(xfs_ifork_t *, int);
 void		xfs_iext_destroy(xfs_ifork_t *);
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 977c4aec587e..47d5b663c37e 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -263,14 +263,6 @@ xfs_inode_item_format(
 	}
 
 	/*
-	 * We don't have to worry about re-ordering here because
-	 * the update_size field is protected by the inode lock
-	 * and we have that held in exclusive mode.
-	 */
-	if (ip->i_update_size)
-		ip->i_update_size = 0;
-
-	/*
 	 * Make sure to get the latest atime from the Linux inode.
 	 */
 	xfs_synchronize_atime(ip);
@@ -712,8 +704,6 @@ xfs_inode_item_unlock(
 	 * Clear out the fields of the inode log item particular
 	 * to the current transaction.
 	 */
-	iip->ili_ilock_recur = 0;
-	iip->ili_iolock_recur = 0;
 	iip->ili_flags = 0;
 
 	/*
diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h
index a52ac125f055..65bae4c9b8bf 100644
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -137,8 +137,6 @@ typedef struct xfs_inode_log_item {
 	struct xfs_inode	*ili_inode;	   /* inode ptr */
 	xfs_lsn_t		ili_flush_lsn;	   /* lsn at last flush */
 	xfs_lsn_t		ili_last_lsn;	   /* lsn at last transaction */
-	unsigned short		ili_ilock_recur;   /* lock recursion count */
-	unsigned short		ili_iolock_recur;  /* lock recursion count */
 	unsigned short		ili_flags;	   /* misc flags */
 	unsigned short		ili_logged;	   /* flushed logged data */
 	unsigned int		ili_last_fields;   /* fields when flushed */
diff --git a/fs/xfs/xfs_inum.h b/fs/xfs/xfs_inum.h
index 7a28191cb0de..b8e4ee4e89a4 100644
--- a/fs/xfs/xfs_inum.h
+++ b/fs/xfs/xfs_inum.h
@@ -72,7 +72,6 @@ struct xfs_mount;
 
 #if XFS_BIG_INUMS
 #define	XFS_MAXINUMBER		((xfs_ino_t)((1ULL << 56) - 1ULL))
-#define	XFS_INO64_OFFSET	((xfs_ino_t)(1ULL << 32))
 #else
 #define	XFS_MAXINUMBER		((xfs_ino_t)((1ULL << 32) - 1ULL))
 #endif
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index aeb2d2221c7d..b68f9107e26c 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -39,7 +39,7 @@
 #include "xfs_error.h"
 #include "xfs_btree.h"
 
-int
+STATIC int
 xfs_internal_inum(
 	xfs_mount_t	*mp,
 	xfs_ino_t	ino)
@@ -353,9 +353,6 @@ xfs_bulkstat(
 	int			end_of_ag; /* set if we've seen the ag end */
 	int			error;	/* error code */
 	int                     fmterror;/* bulkstat formatter result */
-	__int32_t		gcnt;	/* current btree rec's count */
-	xfs_inofree_t		gfree;	/* current btree rec's free mask */
-	xfs_agino_t		gino;	/* current btree rec's start inode */
 	int			i;	/* loop index */
 	int			icount;	/* count of inodes good in irbuf */
 	size_t			irbsize; /* size of irec buffer in bytes */
@@ -442,40 +439,43 @@ xfs_bulkstat(
 		 * we need to get the remainder of the chunk we're in.
 		 */
 		if (agino > 0) {
+			xfs_inobt_rec_incore_t r;
+
 			/*
 			 * Lookup the inode chunk that this inode lives in.
 			 */
-			error = xfs_inobt_lookup_le(cur, agino, 0, 0, &tmp);
+			error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_LE,
+						 &tmp);
 			if (!error &&	/* no I/O error */
 			    tmp &&	/* lookup succeeded */
 					/* got the record, should always work */
-			    !(error = xfs_inobt_get_rec(cur, &gino, &gcnt,
-				    &gfree, &i)) &&
+			    !(error = xfs_inobt_get_rec(cur, &r, &i)) &&
 			    i == 1 &&
 					/* this is the right chunk */
-			    agino < gino + XFS_INODES_PER_CHUNK &&
+			    agino < r.ir_startino + XFS_INODES_PER_CHUNK &&
 					/* lastino was not last in chunk */
-			    (chunkidx = agino - gino + 1) <
+			    (chunkidx = agino - r.ir_startino + 1) <
 				    XFS_INODES_PER_CHUNK &&
 					/* there are some left allocated */
 			    xfs_inobt_maskn(chunkidx,
-				    XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) {
+				    XFS_INODES_PER_CHUNK - chunkidx) &
+				    ~r.ir_free) {
 				/*
 				 * Grab the chunk record.  Mark all the
 				 * uninteresting inodes (because they're
 				 * before our start point) free.
 				 */
 				for (i = 0; i < chunkidx; i++) {
-					if (XFS_INOBT_MASK(i) & ~gfree)
-						gcnt++;
+					if (XFS_INOBT_MASK(i) & ~r.ir_free)
+						r.ir_freecount++;
 				}
-				gfree |= xfs_inobt_maskn(0, chunkidx);
-				irbp->ir_startino = gino;
-				irbp->ir_freecount = gcnt;
-				irbp->ir_free = gfree;
+				r.ir_free |= xfs_inobt_maskn(0, chunkidx);
+				irbp->ir_startino = r.ir_startino;
+				irbp->ir_freecount = r.ir_freecount;
+				irbp->ir_free = r.ir_free;
 				irbp++;
-				agino = gino + XFS_INODES_PER_CHUNK;
-				icount = XFS_INODES_PER_CHUNK - gcnt;
+				agino = r.ir_startino + XFS_INODES_PER_CHUNK;
+				icount = XFS_INODES_PER_CHUNK - r.ir_freecount;
 			} else {
 				/*
 				 * If any of those tests failed, bump the
@@ -493,7 +493,7 @@ xfs_bulkstat(
 			/*
 			 * Start of ag.  Lookup the first inode chunk.
 			 */
-			error = xfs_inobt_lookup_ge(cur, 0, 0, 0, &tmp);
+			error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &tmp);
 			icount = 0;
 		}
 		/*
@@ -501,6 +501,8 @@ xfs_bulkstat(
 		 * until we run out of inodes or space in the buffer.
 		 */
 		while (irbp < irbufend && icount < ubcount) {
+			xfs_inobt_rec_incore_t r;
+
 			/*
 			 * Loop as long as we're unable to read the
 			 * inode btree.
@@ -510,51 +512,55 @@ xfs_bulkstat(
 				if (XFS_AGINO_TO_AGBNO(mp, agino) >=
 						be32_to_cpu(agi->agi_length))
 					break;
-				error = xfs_inobt_lookup_ge(cur, agino, 0, 0,
-							    &tmp);
+				error = xfs_inobt_lookup(cur, agino,
+							 XFS_LOOKUP_GE, &tmp);
 				cond_resched();
 			}
 			/*
 			 * If ran off the end of the ag either with an error,
 			 * or the normal way, set end and stop collecting.
 			 */
-			if (error ||
-			    (error = xfs_inobt_get_rec(cur, &gino, &gcnt,
-				    &gfree, &i)) ||
-			    i == 0) {
+			if (error) {
 				end_of_ag = 1;
 				break;
 			}
+
+			error = xfs_inobt_get_rec(cur, &r, &i);
+			if (error || i == 0) {
+				end_of_ag = 1;
+				break;
+			}
+
 			/*
 			 * If this chunk has any allocated inodes, save it.
 			 * Also start read-ahead now for this chunk.
 			 */
-			if (gcnt < XFS_INODES_PER_CHUNK) {
+			if (r.ir_freecount < XFS_INODES_PER_CHUNK) {
 				/*
 				 * Loop over all clusters in the next chunk.
 				 * Do a readahead if there are any allocated
 				 * inodes in that cluster.
 				 */
-				for (agbno = XFS_AGINO_TO_AGBNO(mp, gino),
-				     chunkidx = 0;
+				agbno = XFS_AGINO_TO_AGBNO(mp, r.ir_startino);
+				for (chunkidx = 0;
 				     chunkidx < XFS_INODES_PER_CHUNK;
 				     chunkidx += nicluster,
 				     agbno += nbcluster) {
-					if (xfs_inobt_maskn(chunkidx,
-							    nicluster) & ~gfree)
+					if (xfs_inobt_maskn(chunkidx, nicluster)
+							& ~r.ir_free)
 						xfs_btree_reada_bufs(mp, agno,
 							agbno, nbcluster);
 				}
-				irbp->ir_startino = gino;
-				irbp->ir_freecount = gcnt;
-				irbp->ir_free = gfree;
+				irbp->ir_startino = r.ir_startino;
+				irbp->ir_freecount = r.ir_freecount;
+				irbp->ir_free = r.ir_free;
 				irbp++;
-				icount += XFS_INODES_PER_CHUNK - gcnt;
+				icount += XFS_INODES_PER_CHUNK - r.ir_freecount;
 			}
 			/*
 			 * Set agino to after this chunk and bump the cursor.
 			 */
-			agino = gino + XFS_INODES_PER_CHUNK;
+			agino = r.ir_startino + XFS_INODES_PER_CHUNK;
 			error = xfs_btree_increment(cur, 0, &tmp);
 			cond_resched();
 		}
@@ -820,9 +826,7 @@ xfs_inumbers(
 	int		bufidx;
 	xfs_btree_cur_t	*cur;
 	int		error;
-	__int32_t	gcnt;
-	xfs_inofree_t	gfree;
-	xfs_agino_t	gino;
+	xfs_inobt_rec_incore_t r;
 	int		i;
 	xfs_ino_t	ino;
 	int		left;
@@ -855,7 +859,8 @@ xfs_inumbers(
 				continue;
 			}
 			cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno);
-			error = xfs_inobt_lookup_ge(cur, agino, 0, 0, &tmp);
+			error = xfs_inobt_lookup(cur, agino, XFS_LOOKUP_GE,
+						 &tmp);
 			if (error) {
 				xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
 				cur = NULL;
@@ -870,9 +875,8 @@ xfs_inumbers(
 				continue;
 			}
 		}
-		if ((error = xfs_inobt_get_rec(cur, &gino, &gcnt, &gfree,
-			&i)) ||
-		    i == 0) {
+		error = xfs_inobt_get_rec(cur, &r, &i);
+		if (error || i == 0) {
 			xfs_buf_relse(agbp);
 			agbp = NULL;
 			xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
@@ -881,10 +885,12 @@ xfs_inumbers(
 			agino = 0;
 			continue;
 		}
-		agino = gino + XFS_INODES_PER_CHUNK - 1;
-		buffer[bufidx].xi_startino = XFS_AGINO_TO_INO(mp, agno, gino);
-		buffer[bufidx].xi_alloccount = XFS_INODES_PER_CHUNK - gcnt;
-		buffer[bufidx].xi_allocmask = ~gfree;
+		agino = r.ir_startino + XFS_INODES_PER_CHUNK - 1;
+		buffer[bufidx].xi_startino =
+			XFS_AGINO_TO_INO(mp, agno, r.ir_startino);
+		buffer[bufidx].xi_alloccount =
+			XFS_INODES_PER_CHUNK - r.ir_freecount;
+		buffer[bufidx].xi_allocmask = ~r.ir_free;
 		bufidx++;
 		left--;
 		if (bufidx == bcount) {
diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h
index 1fb04e7deb61..20792bf45946 100644
--- a/fs/xfs/xfs_itable.h
+++ b/fs/xfs/xfs_itable.h
@@ -99,11 +99,6 @@ xfs_bulkstat_one(
 	void			*dibuff,
 	int			*stat);
 
-int
-xfs_internal_inum(
-	xfs_mount_t		*mp,
-	xfs_ino_t		ino);
-
 typedef int (*inumbers_fmt_pf)(
 	void			__user *ubuffer, /* buffer to write to */
 	const xfs_inogrp_t	*buffer,	/* buffer to read from */
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index bcad5f4c1fd1..679c7c4926a2 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -451,8 +451,6 @@ extern int	 xlog_find_tail(xlog_t	*log,
 extern int	 xlog_recover(xlog_t *log);
 extern int	 xlog_recover_finish(xlog_t *log);
 extern void	 xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
-extern void	 xlog_recover_process_iunlinks(xlog_t *log);
-
 extern struct xfs_buf *xlog_get_bp(xlog_t *, int);
 extern void	 xlog_put_bp(struct xfs_buf *);
 
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 47da2fb45377..1099395d7d6c 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -3263,7 +3263,7 @@ xlog_recover_process_one_iunlink(
  * freeing of the inode and its removal from the list must be
  * atomic.
  */
-void
+STATIC void
 xlog_recover_process_iunlinks(
 	xlog_t		*log)
 {
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 5c6f092659c1..8b6c9e807efb 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -1568,7 +1568,7 @@ xfs_mod_sb(xfs_trans_t *tp, __int64_t fields)
  *
  * The m_sb_lock must be held when this routine is called.
  */
-int
+STATIC int
 xfs_mod_incore_sb_unlocked(
 	xfs_mount_t	*mp,
 	xfs_sb_field_t	field,
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index a5122382afde..a6c023bc0fb2 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -414,13 +414,10 @@ typedef struct xfs_mod_sb {
 
 extern int	xfs_log_sbcount(xfs_mount_t *, uint);
 extern int	xfs_mountfs(xfs_mount_t *mp);
-extern void	xfs_mountfs_check_barriers(xfs_mount_t *mp);
 
 extern void	xfs_unmountfs(xfs_mount_t *);
 extern int	xfs_unmountfs_writesb(xfs_mount_t *);
 extern int	xfs_mod_incore_sb(xfs_mount_t *, xfs_sb_field_t, int64_t, int);
-extern int	xfs_mod_incore_sb_unlocked(xfs_mount_t *, xfs_sb_field_t,
-			int64_t, int);
 extern int	xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *,
 			uint, int);
 extern int	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c
index afee7eb24323..4b0613d99faa 100644
--- a/fs/xfs/xfs_mru_cache.c
+++ b/fs/xfs/xfs_mru_cache.c
@@ -564,35 +564,6 @@ xfs_mru_cache_lookup(
 }
 
 /*
- * To look up an element using its key, but leave its location in the internal
- * lists alone, call xfs_mru_cache_peek().  If the element isn't found, this
- * function returns NULL.
- *
- * See the comments above the declaration of the xfs_mru_cache_lookup() function
- * for important locking information pertaining to this call.
- */
-void *
-xfs_mru_cache_peek(
-	xfs_mru_cache_t	*mru,
-	unsigned long	key)
-{
-	xfs_mru_cache_elem_t *elem;
-
-	ASSERT(mru && mru->lists);
-	if (!mru || !mru->lists)
-		return NULL;
-
-	spin_lock(&mru->lock);
-	elem = radix_tree_lookup(&mru->store, key);
-	if (!elem)
-		spin_unlock(&mru->lock);
-	else
-		__release(mru_lock); /* help sparse not be stupid */
-
-	return elem ? elem->value : NULL;
-}
-
-/*
  * To release the internal data structure spinlock after having performed an
  * xfs_mru_cache_lookup() or an xfs_mru_cache_peek(), call xfs_mru_cache_done()
  * with the data store pointer.
diff --git a/fs/xfs/xfs_mru_cache.h b/fs/xfs/xfs_mru_cache.h
index dd58ea1bbebe..5d439f34b0c9 100644
--- a/fs/xfs/xfs_mru_cache.h
+++ b/fs/xfs/xfs_mru_cache.h
@@ -49,7 +49,6 @@ int xfs_mru_cache_insert(struct xfs_mru_cache *mru, unsigned long key,
 void * xfs_mru_cache_remove(struct xfs_mru_cache *mru, unsigned long key);
 void xfs_mru_cache_delete(struct xfs_mru_cache *mru, unsigned long key);
 void *xfs_mru_cache_lookup(struct xfs_mru_cache *mru, unsigned long key);
-void *xfs_mru_cache_peek(struct xfs_mru_cache *mru, unsigned long key);
 void xfs_mru_cache_done(struct xfs_mru_cache *mru);
 
 #endif /* __XFS_MRU_CACHE_H__ */
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index fea68615ed23..3f816ad7ff19 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -88,90 +88,6 @@ xfs_write_clear_setuid(
 }
 
 /*
- * Handle logging requirements of various synchronous types of write.
- */
-int
-xfs_write_sync_logforce(
-	xfs_mount_t	*mp,
-	xfs_inode_t	*ip)
-{
-	int		error = 0;
-
-	/*
-	 * If we're treating this as O_DSYNC and we have not updated the
-	 * size, force the log.
-	 */
-	if (!(mp->m_flags & XFS_MOUNT_OSYNCISOSYNC) &&
-	    !(ip->i_update_size)) {
-		xfs_inode_log_item_t	*iip = ip->i_itemp;
-
-		/*
-		 * If an allocation transaction occurred
-		 * without extending the size, then we have to force
-		 * the log up the proper point to ensure that the
-		 * allocation is permanent.  We can't count on
-		 * the fact that buffered writes lock out direct I/O
-		 * writes - the direct I/O write could have extended
-		 * the size nontransactionally, then finished before
-		 * we started.  xfs_write_file will think that the file
-		 * didn't grow but the update isn't safe unless the
-		 * size change is logged.
-		 *
-		 * Force the log if we've committed a transaction
-		 * against the inode or if someone else has and
-		 * the commit record hasn't gone to disk (e.g.
-		 * the inode is pinned).  This guarantees that
-		 * all changes affecting the inode are permanent
-		 * when we return.
-		 */
-		if (iip && iip->ili_last_lsn) {
-			error = _xfs_log_force(mp, iip->ili_last_lsn,
-					XFS_LOG_FORCE | XFS_LOG_SYNC, NULL);
-		} else if (xfs_ipincount(ip) > 0) {
-			error = _xfs_log_force(mp, (xfs_lsn_t)0,
-					XFS_LOG_FORCE | XFS_LOG_SYNC, NULL);
-		}
-
-	} else {
-		xfs_trans_t	*tp;
-
-		/*
-		 * O_SYNC or O_DSYNC _with_ a size update are handled
-		 * the same way.
-		 *
-		 * If the write was synchronous then we need to make
-		 * sure that the inode modification time is permanent.
-		 * We'll have updated the timestamp above, so here
-		 * we use a synchronous transaction to log the inode.
-		 * It's not fast, but it's necessary.
-		 *
-		 * If this a dsync write and the size got changed
-		 * non-transactionally, then we need to ensure that
-		 * the size change gets logged in a synchronous
-		 * transaction.
-		 */
-		tp = xfs_trans_alloc(mp, XFS_TRANS_WRITE_SYNC);
-		if ((error = xfs_trans_reserve(tp, 0,
-						XFS_SWRITE_LOG_RES(mp),
-						0, 0, 0))) {
-			/* Transaction reserve failed */
-			xfs_trans_cancel(tp, 0);
-		} else {
-			/* Transaction reserve successful */
-			xfs_ilock(ip, XFS_ILOCK_EXCL);
-			xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
-			xfs_trans_ihold(tp, ip);
-			xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-			xfs_trans_set_sync(tp);
-			error = xfs_trans_commit(tp, 0);
-			xfs_iunlock(ip, XFS_ILOCK_EXCL);
-		}
-	}
-
-	return error;
-}
-
-/*
  * Force a shutdown of the filesystem instantly while keeping
  * the filesystem consistent. We don't do an unmount here; just shutdown
  * the shop, make sure that absolutely nothing persistent happens to
diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h
index f76c003ec55d..f5e4874c37d8 100644
--- a/fs/xfs/xfs_rw.h
+++ b/fs/xfs/xfs_rw.h
@@ -68,7 +68,6 @@ xfs_get_extsz_hint(
  * Prototypes for functions in xfs_rw.c.
  */
 extern int xfs_write_clear_setuid(struct xfs_inode *ip);
-extern int xfs_write_sync_logforce(struct xfs_mount *mp, struct xfs_inode *ip);
 extern int xfs_bwrite(struct xfs_mount *mp, struct xfs_buf *bp);
 extern int xfs_bioerror(struct xfs_buf *bp);
 extern int xfs_bioerror_relse(struct xfs_buf *bp);
@@ -78,10 +77,4 @@ extern int xfs_read_buf(struct xfs_mount *mp, xfs_buftarg_t *btp,
 extern void xfs_ioerror_alert(char *func, struct xfs_mount *mp,
 				xfs_buf_t *bp, xfs_daddr_t blkno);
 
-/*
- * Prototypes for functions in xfs_vnodeops.c.
- */
-extern int xfs_free_eofblocks(struct xfs_mount *mp, struct xfs_inode *ip,
-			int flags);
-
 #endif /* __XFS_RW_H__ */
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 775249a54f6f..ed47fc77759c 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -68,7 +68,7 @@ typedef struct xfs_trans_header {
 #define XFS_TRANS_GROWFS		14
 #define XFS_TRANS_STRAT_WRITE		15
 #define XFS_TRANS_DIOSTRAT		16
-#define	XFS_TRANS_WRITE_SYNC		17
+/* 17 was XFS_TRANS_WRITE_SYNC */
 #define	XFS_TRANS_WRITEID		18
 #define	XFS_TRANS_ADDAFORK		19
 #define	XFS_TRANS_ATTRINVAL		20
diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c
index 8ee2f8c8b0a6..218829e6a152 100644
--- a/fs/xfs/xfs_trans_buf.c
+++ b/fs/xfs/xfs_trans_buf.c
@@ -307,7 +307,7 @@ xfs_trans_read_buf(
 			return (flags & XFS_BUF_TRYLOCK) ?
 					EAGAIN : XFS_ERROR(ENOMEM);
 
-		if ((bp != NULL) && (XFS_BUF_GETERROR(bp) != 0)) {
+		if (XFS_BUF_GETERROR(bp) != 0) {
 			xfs_ioerror_alert("xfs_trans_read_buf", mp,
 					  bp, blkno);
 			error = XFS_BUF_GETERROR(bp);
@@ -315,7 +315,7 @@ xfs_trans_read_buf(
 			return error;
 		}
 #ifdef DEBUG
-		if (xfs_do_error && (bp != NULL)) {
+		if (xfs_do_error) {
 			if (xfs_error_target == target) {
 				if (((xfs_req_num++) % xfs_error_mod) == 0) {
 					xfs_buf_relse(bp);
diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c
index 23d276af2e0c..785ff101da0a 100644
--- a/fs/xfs/xfs_trans_inode.c
+++ b/fs/xfs/xfs_trans_inode.c
@@ -49,30 +49,7 @@ xfs_trans_inode_broot_debug(
 
 
 /*
- * Get and lock the inode for the caller if it is not already
- * locked within the given transaction.  If it is already locked
- * within the transaction, just increment its lock recursion count
- * and return a pointer to it.
- *
- * For an inode to be locked in a transaction, the inode lock, as
- * opposed to the io lock, must be taken exclusively.  This ensures
- * that the inode can be involved in only 1 transaction at a time.
- * Lock recursion is handled on the io lock, but only for lock modes
- * of equal or lesser strength.  That is, you can recur on the io lock
- * held EXCL with a SHARED request but not vice versa.  Also, if
- * the inode is already a part of the transaction then you cannot
- * go from not holding the io lock to having it EXCL or SHARED.
- *
- * Use the inode cache routine xfs_inode_incore() to find the inode
- * if it is already owned by this transaction.
- *
- * If we don't already own the inode, use xfs_iget() to get it.
- * Since the inode log item structure is embedded in the incore
- * inode structure and is initialized when the inode is brought
- * into memory, there is nothing to do with it here.
- *
- * If the given transaction pointer is NULL, just call xfs_iget().
- * This simplifies code which must handle both cases.
+ * Get an inode and join it to the transaction.
  */
 int
 xfs_trans_iget(
@@ -84,62 +61,11 @@ xfs_trans_iget(
 	xfs_inode_t	**ipp)
 {
 	int			error;
-	xfs_inode_t		*ip;
-
-	/*
-	 * If the transaction pointer is NULL, just call the normal
-	 * xfs_iget().
-	 */
-	if (tp == NULL)
-		return xfs_iget(mp, NULL, ino, flags, lock_flags, ipp, 0);
-
-	/*
-	 * If we find the inode in core with this transaction
-	 * pointer in its i_transp field, then we know we already
-	 * have it locked.  In this case we just increment the lock
-	 * recursion count and return the inode to the caller.
-	 * Assert that the inode is already locked in the mode requested
-	 * by the caller.  We cannot do lock promotions yet, so
-	 * die if someone gets this wrong.
-	 */
-	if ((ip = xfs_inode_incore(tp->t_mountp, ino, tp)) != NULL) {
-		/*
-		 * Make sure that the inode lock is held EXCL and
-		 * that the io lock is never upgraded when the inode
-		 * is already a part of the transaction.
-		 */
-		ASSERT(ip->i_itemp != NULL);
-		ASSERT(lock_flags & XFS_ILOCK_EXCL);
-		ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
-		ASSERT((!(lock_flags & XFS_IOLOCK_EXCL)) ||
-		       xfs_isilocked(ip, XFS_IOLOCK_EXCL));
-		ASSERT((!(lock_flags & XFS_IOLOCK_EXCL)) ||
-		       (ip->i_itemp->ili_flags & XFS_ILI_IOLOCKED_EXCL));
-		ASSERT((!(lock_flags & XFS_IOLOCK_SHARED)) ||
-		       xfs_isilocked(ip, XFS_IOLOCK_EXCL|XFS_IOLOCK_SHARED));
-		ASSERT((!(lock_flags & XFS_IOLOCK_SHARED)) ||
-		       (ip->i_itemp->ili_flags & XFS_ILI_IOLOCKED_ANY));
-
-		if (lock_flags & (XFS_IOLOCK_SHARED | XFS_IOLOCK_EXCL)) {
-			ip->i_itemp->ili_iolock_recur++;
-		}
-		if (lock_flags & XFS_ILOCK_EXCL) {
-			ip->i_itemp->ili_ilock_recur++;
-		}
-		*ipp = ip;
-		return 0;
-	}
-
-	ASSERT(lock_flags & XFS_ILOCK_EXCL);
-	error = xfs_iget(tp->t_mountp, tp, ino, flags, lock_flags, &ip, 0);
-	if (error) {
-		return error;
-	}
-	ASSERT(ip != NULL);
 
-	xfs_trans_ijoin(tp, ip, lock_flags);
-	*ipp = ip;
-	return 0;
+	error = xfs_iget(mp, tp, ino, flags, lock_flags, ipp, 0);
+	if (!error && tp)
+		xfs_trans_ijoin(tp, *ipp, lock_flags);
+	return error;
 }
 
 /*
@@ -163,8 +89,6 @@ xfs_trans_ijoin(
 		xfs_inode_item_init(ip, ip->i_mount);
 	iip = ip->i_itemp;
 	ASSERT(iip->ili_flags == 0);
-	ASSERT(iip->ili_ilock_recur == 0);
-	ASSERT(iip->ili_iolock_recur == 0);
 
 	/*
 	 * Get a log_item_desc to point at the new item.
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 492d75bae2bf..a434f287962d 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -611,7 +611,7 @@ xfs_fsync(
 	xfs_inode_t	*ip)
 {
 	xfs_trans_t	*tp;
-	int		error;
+	int		error = 0;
 	int		log_flushed = 0, changed = 1;
 
 	xfs_itrace_entry(ip);
@@ -619,14 +619,9 @@ xfs_fsync(
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
 		return XFS_ERROR(EIO);
 
-	/* capture size updates in I/O completion before writing the inode. */
-	error = xfs_wait_on_pages(ip, 0, -1);
-	if (error)
-		return XFS_ERROR(error);
-
 	/*
 	 * We always need to make sure that the required inode state is safe on
-	 * disk.  The vnode might be clean but we still might need to force the
+	 * disk.  The inode might be clean but we still might need to force the
 	 * log because of committed transactions that haven't hit the disk yet.
 	 * Likewise, there could be unflushed non-transactional changes to the
 	 * inode core that have to go to disk and this requires us to issue
@@ -638,7 +633,7 @@ xfs_fsync(
 	 */
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 
-	if (!(ip->i_update_size || ip->i_update_core)) {
+	if (!ip->i_update_core) {
 		/*
 		 * Timestamps/size haven't changed since last inode flush or
 		 * inode transaction commit.  That means either nothing got
@@ -718,7 +713,7 @@ xfs_fsync(
  * when the link count isn't zero and by xfs_dm_punch_hole() when
  * punching a hole to EOF.
  */
-int
+STATIC int
 xfs_free_eofblocks(
 	xfs_mount_t	*mp,
 	xfs_inode_t	*ip,
@@ -1476,8 +1471,8 @@ xfs_create(
 	if (error == ENOSPC) {
 		/* flush outstanding delalloc blocks and retry */
 		xfs_flush_inodes(dp);
-		error = xfs_trans_reserve(tp, resblks, XFS_CREATE_LOG_RES(mp), 0,
-			XFS_TRANS_PERM_LOG_RES, XFS_CREATE_LOG_COUNT);
+		error = xfs_trans_reserve(tp, resblks, log_res, 0,
+				XFS_TRANS_PERM_LOG_RES, log_count);
 	}
 	if (error == ENOSPC) {
 		/* No space at all so try a "no-allocation" reservation */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index a43223af98b6..29ca8f53ffbe 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -88,7 +88,8 @@
 #endif
 
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
-#define MCOUNT_REC()	VMLINUX_SYMBOL(__start_mcount_loc) = .; \
+#define MCOUNT_REC()	. = ALIGN(8);				\
+			VMLINUX_SYMBOL(__start_mcount_loc) = .; \
 			*(__mcount_loc)				\
 			VMLINUX_SYMBOL(__stop_mcount_loc) = .;
 #else
@@ -328,7 +329,6 @@
 	/* __*init sections */						\
 	__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) {		\
 		*(.ref.rodata)						\
-		MCOUNT_REC()						\
 		DEV_KEEP(init.rodata)					\
 		DEV_KEEP(exit.rodata)					\
 		CPU_KEEP(init.rodata)					\
@@ -452,6 +452,7 @@
 	MEM_DISCARD(init.data)						\
 	KERNEL_CTORS()							\
 	*(.init.rodata)							\
+	MCOUNT_REC()							\
 	DEV_DISCARD(init.rodata)					\
 	CPU_DISCARD(init.rodata)					\
 	MEM_DISCARD(init.rodata)
diff --git a/include/keys/rxrpc-type.h b/include/keys/rxrpc-type.h
index 7609365577f1..5cb86c307f5d 100644
--- a/include/keys/rxrpc-type.h
+++ b/include/keys/rxrpc-type.h
@@ -21,4 +21,111 @@ extern struct key_type key_type_rxrpc;
 
 extern struct key *rxrpc_get_null_key(const char *);
 
+/*
+ * RxRPC key for Kerberos IV (type-2 security)
+ */
+struct rxkad_key {
+	u32	vice_id;
+	u32	start;			/* time at which ticket starts */
+	u32	expiry;			/* time at which ticket expires */
+	u32	kvno;			/* key version number */
+	u8	primary_flag;		/* T if key for primary cell for this user */
+	u16	ticket_len;		/* length of ticket[] */
+	u8	session_key[8];		/* DES session key */
+	u8	ticket[0];		/* the encrypted ticket */
+};
+
+/*
+ * Kerberos 5 principal
+ *	name/name/name@realm
+ */
+struct krb5_principal {
+	u8	n_name_parts;		/* N of parts of the name part of the principal */
+	char	**name_parts;		/* parts of the name part of the principal */
+	char	*realm;			/* parts of the realm part of the principal */
+};
+
+/*
+ * Kerberos 5 tagged data
+ */
+struct krb5_tagged_data {
+	/* for tag value, see /usr/include/krb5/krb5.h
+	 * - KRB5_AUTHDATA_* for auth data
+	 * - 
+	 */
+	s32		tag;
+	u32		data_len;
+	u8		*data;
+};
+
+/*
+ * RxRPC key for Kerberos V (type-5 security)
+ */
+struct rxk5_key {
+	u64			authtime;	/* time at which auth token generated */
+	u64			starttime;	/* time at which auth token starts */
+	u64			endtime;	/* time at which auth token expired */
+	u64			renew_till;	/* time to which auth token can be renewed */
+	s32			is_skey;	/* T if ticket is encrypted in another ticket's
+						 * skey */
+	s32			flags;		/* mask of TKT_FLG_* bits (krb5/krb5.h) */
+	struct krb5_principal	client;		/* client principal name */
+	struct krb5_principal	server;		/* server principal name */
+	u16			ticket_len;	/* length of ticket */
+	u16			ticket2_len;	/* length of second ticket */
+	u8			n_authdata;	/* number of authorisation data elements */
+	u8			n_addresses;	/* number of addresses */
+	struct krb5_tagged_data	session;	/* session data; tag is enctype */
+	struct krb5_tagged_data *addresses;	/* addresses */
+	u8			*ticket;	/* krb5 ticket */
+	u8			*ticket2;	/* second krb5 ticket, if related to ticket (via
+						 * DUPLICATE-SKEY or ENC-TKT-IN-SKEY) */
+	struct krb5_tagged_data *authdata;	/* authorisation data */
+};
+
+/*
+ * list of tokens attached to an rxrpc key
+ */
+struct rxrpc_key_token {
+	u16	security_index;		/* RxRPC header security index */
+	struct rxrpc_key_token *next;	/* the next token in the list */
+	union {
+		struct rxkad_key *kad;
+		struct rxk5_key *k5;
+	};
+};
+
+/*
+ * structure of raw payloads passed to add_key() or instantiate key
+ */
+struct rxrpc_key_data_v1 {
+	u32		kif_version;		/* 1 */
+	u16		security_index;
+	u16		ticket_length;
+	u32		expiry;			/* time_t */
+	u32		kvno;
+	u8		session_key[8];
+	u8		ticket[0];
+};
+
+/*
+ * AF_RXRPC key payload derived from XDR format
+ * - based on openafs-1.4.10/src/auth/afs_token.xg
+ */
+#define AFSTOKEN_LENGTH_MAX		16384	/* max payload size */
+#define AFSTOKEN_STRING_MAX		256	/* max small string length */
+#define AFSTOKEN_DATA_MAX		64	/* max small data length */
+#define AFSTOKEN_CELL_MAX		64	/* max cellname length */
+#define AFSTOKEN_MAX			8	/* max tokens per payload */
+#define AFSTOKEN_BDATALN_MAX		16384	/* max big data length */
+#define AFSTOKEN_RK_TIX_MAX		12000	/* max RxKAD ticket size */
+#define AFSTOKEN_GK_KEY_MAX		64	/* max GSSAPI key size */
+#define AFSTOKEN_GK_TOKEN_MAX		16384	/* max GSSAPI token size */
+#define AFSTOKEN_K5_COMPONENTS_MAX	16	/* max K5 components */
+#define AFSTOKEN_K5_NAME_MAX		128	/* max K5 name length */
+#define AFSTOKEN_K5_REALM_MAX		64	/* max K5 realm name length */
+#define AFSTOKEN_K5_TIX_MAX		16384	/* max K5 ticket size */
+#define AFSTOKEN_K5_ADDRESSES_MAX	16	/* max K5 addresses */
+#define AFSTOKEN_K5_AUTHDATA_MAX	16	/* max K5 pieces of auth data */
+
 #endif /* _KEYS_RXRPC_TYPE_H */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 1219be4fb42e..83d2fbd81b93 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/cache.h>
 #include <linux/timer.h>
+#include <linux/init.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 
@@ -148,14 +149,11 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
  * @disable:		optional function to disable the clocksource
  * @mask:		bitmask for two's complement
  *			subtraction of non 64 bit counters
- * @mult:		cycle to nanosecond multiplier (adjusted by NTP)
- * @mult_orig:		cycle to nanosecond multiplier (unadjusted by NTP)
+ * @mult:		cycle to nanosecond multiplier
  * @shift:		cycle to nanosecond divisor (power of two)
  * @flags:		flags describing special properties
  * @vread:		vsyscall based read
  * @resume:		resume function for the clocksource, if necessary
- * @cycle_interval:	Used internally by timekeeping core, please ignore.
- * @xtime_interval:	Used internally by timekeeping core, please ignore.
  */
 struct clocksource {
 	/*
@@ -169,7 +167,6 @@ struct clocksource {
 	void (*disable)(struct clocksource *cs);
 	cycle_t mask;
 	u32 mult;
-	u32 mult_orig;
 	u32 shift;
 	unsigned long flags;
 	cycle_t (*vread)(void);
@@ -181,19 +178,12 @@ struct clocksource {
 #define CLKSRC_FSYS_MMIO_SET(mmio, addr)      do { } while (0)
 #endif
 
-	/* timekeeping specific data, ignore */
-	cycle_t cycle_interval;
-	u64	xtime_interval;
-	u32	raw_interval;
 	/*
 	 * Second part is written at each timer interrupt
 	 * Keep it in a different cache line to dirty no
 	 * more than one cache line.
 	 */
 	cycle_t cycle_last ____cacheline_aligned_in_smp;
-	u64 xtime_nsec;
-	s64 error;
-	struct timespec raw_time;
 
 #ifdef CONFIG_CLOCKSOURCE_WATCHDOG
 	/* Watchdog related data, used by the framework */
@@ -202,8 +192,6 @@ struct clocksource {
 #endif
 };
 
-extern struct clocksource *clock;	/* current clocksource */
-
 /*
  * Clock source flags bits::
  */
@@ -212,6 +200,7 @@ extern struct clocksource *clock;	/* current clocksource */
 
 #define CLOCK_SOURCE_WATCHDOG			0x10
 #define CLOCK_SOURCE_VALID_FOR_HRES		0x20
+#define CLOCK_SOURCE_UNSTABLE			0x40
 
 /* simplify initialization of mask field */
 #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)
@@ -268,108 +257,15 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
 }
 
 /**
- * clocksource_read: - Access the clocksource's current cycle value
- * @cs:		pointer to clocksource being read
- *
- * Uses the clocksource to return the current cycle_t value
- */
-static inline cycle_t clocksource_read(struct clocksource *cs)
-{
-	return cs->read(cs);
-}
-
-/**
- * clocksource_enable: - enable clocksource
- * @cs:		pointer to clocksource
- *
- * Enables the specified clocksource. The clocksource callback
- * function should start up the hardware and setup mult and field
- * members of struct clocksource to reflect hardware capabilities.
- */
-static inline int clocksource_enable(struct clocksource *cs)
-{
-	int ret = 0;
-
-	if (cs->enable)
-		ret = cs->enable(cs);
-
-	/*
-	 * The frequency may have changed while the clocksource
-	 * was disabled. If so the code in ->enable() must update
-	 * the mult value to reflect the new frequency. Make sure
-	 * mult_orig follows this change.
-	 */
-	cs->mult_orig = cs->mult;
-
-	return ret;
-}
-
-/**
- * clocksource_disable: - disable clocksource
- * @cs:		pointer to clocksource
- *
- * Disables the specified clocksource. The clocksource callback
- * function should power down the now unused hardware block to
- * save power.
- */
-static inline void clocksource_disable(struct clocksource *cs)
-{
-	/*
-	 * Save mult_orig in mult so clocksource_enable() can
-	 * restore the value regardless if ->enable() updates
-	 * the value of mult or not.
-	 */
-	cs->mult = cs->mult_orig;
-
-	if (cs->disable)
-		cs->disable(cs);
-}
-
-/**
- * cyc2ns - converts clocksource cycles to nanoseconds
- * @cs:		Pointer to clocksource
- * @cycles:	Cycles
+ * clocksource_cyc2ns - converts clocksource cycles to nanoseconds
  *
- * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds.
+ * Converts cycles to nanoseconds, using the given mult and shift.
  *
  * XXX - This could use some mult_lxl_ll() asm optimization
  */
-static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles)
-{
-	u64 ret = (u64)cycles;
-	ret = (ret * cs->mult) >> cs->shift;
-	return ret;
-}
-
-/**
- * clocksource_calculate_interval - Calculates a clocksource interval struct
- *
- * @c:		Pointer to clocksource.
- * @length_nsec: Desired interval length in nanoseconds.
- *
- * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
- * pair and interval request.
- *
- * Unless you're the timekeeping code, you should not be using this!
- */
-static inline void clocksource_calculate_interval(struct clocksource *c,
-					  	  unsigned long length_nsec)
+static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
 {
-	u64 tmp;
-
-	/* Do the ns -> cycle conversion first, using original mult */
-	tmp = length_nsec;
-	tmp <<= c->shift;
-	tmp += c->mult_orig/2;
-	do_div(tmp, c->mult_orig);
-
-	c->cycle_interval = (cycle_t)tmp;
-	if (c->cycle_interval == 0)
-		c->cycle_interval = 1;
-
-	/* Go back from cycles -> shifted ns, this time use ntp adjused mult */
-	c->xtime_interval = (u64)c->cycle_interval * c->mult;
-	c->raw_interval = ((u64)c->cycle_interval * c->mult_orig) >> c->shift;
+	return ((u64) cycles * mult) >> shift;
 }
 
 
@@ -380,6 +276,8 @@ extern void clocksource_touch_watchdog(void);
 extern struct clocksource* clocksource_get_next(void);
 extern void clocksource_change_rating(struct clocksource *cs, int rating);
 extern void clocksource_resume(void);
+extern struct clocksource * __init __weak clocksource_default_clock(void);
+extern void clocksource_mark_unstable(struct clocksource *cs);
 
 #ifdef CONFIG_GENERIC_TIME_VSYSCALL
 extern void update_vsyscall(struct timespec *ts, struct clocksource *c);
@@ -394,4 +292,6 @@ static inline void update_vsyscall_tz(void)
 }
 #endif
 
+extern void timekeeping_notify(struct clocksource *clock);
+
 #endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 161042746afc..44717eb47639 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -65,6 +65,9 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb,
 
 struct cpufreq_governor;
 
+/* /sys/devices/system/cpu/cpufreq: entry point for global variables */
+extern struct kobject *cpufreq_global_kobject;
+
 #define CPUFREQ_ETERNAL			(-1)
 struct cpufreq_cpuinfo {
 	unsigned int		max_freq;
@@ -274,6 +277,13 @@ struct freq_attr {
 	ssize_t (*store)(struct cpufreq_policy *, const char *, size_t count);
 };
 
+struct global_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *kobj,
+			struct attribute *attr, char *buf);
+	ssize_t (*store)(struct kobject *a, struct attribute *b,
+			 const char *c, size_t count);
+};
 
 /*********************************************************************
  *                        CPUFREQ 2.6. INTERFACE                     *
diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h
index f352f06fa063..5076fe0c8a96 100644
--- a/include/linux/delayacct.h
+++ b/include/linux/delayacct.h
@@ -18,7 +18,6 @@
 #define _LINUX_DELAYACCT_H
 
 #include <linux/sched.h>
-#include <linux/taskstats_kern.h>
 
 /*
  * Per-task flags relevant to delay accounting
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 23f7179bf74e..bd099ba82ccc 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -1,8 +1,8 @@
 #ifndef _LINUX_FTRACE_EVENT_H
 #define _LINUX_FTRACE_EVENT_H
 
-#include <linux/trace_seq.h>
 #include <linux/ring_buffer.h>
+#include <linux/trace_seq.h>
 #include <linux/percpu.h>
 
 struct trace_array;
@@ -34,7 +34,7 @@ struct trace_entry {
 	unsigned char		flags;
 	unsigned char		preempt_count;
 	int			pid;
-	int			tgid;
+	int			lock_depth;
 };
 
 #define FTRACE_MAX_EVENT						\
@@ -135,7 +135,7 @@ struct ftrace_event_call {
 };
 
 #define MAX_FILTER_PRED		32
-#define MAX_FILTER_STR_VAL	128
+#define MAX_FILTER_STR_VAL	256	/* Should handle KSYM_SYMBOL_LEN */
 
 extern void destroy_preds(struct ftrace_event_call *call);
 extern int filter_match_preds(struct ftrace_event_call *call, void *rec);
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index cf593bf9fd32..3e2925a34bf0 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -30,6 +30,10 @@
  *  - add umask flag to input argument of open, mknod and mkdir
  *  - add notification messages for invalidation of inodes and
  *    directory entries
+ *
+ * 7.13
+ *  - make max number of background requests and congestion threshold
+ *    tunables
  */
 
 #ifndef _LINUX_FUSE_H
@@ -37,11 +41,31 @@
 
 #include <linux/types.h>
 
+/*
+ * Version negotiation:
+ *
+ * Both the kernel and userspace send the version they support in the
+ * INIT request and reply respectively.
+ *
+ * If the major versions match then both shall use the smallest
+ * of the two minor versions for communication.
+ *
+ * If the kernel supports a larger major version, then userspace shall
+ * reply with the major version it supports, ignore the rest of the
+ * INIT message and expect a new INIT message from the kernel with a
+ * matching major version.
+ *
+ * If the library supports a larger major version, then it shall fall
+ * back to the major protocol version sent by the kernel for
+ * communication and reply with that major version (and an arbitrary
+ * supported minor version).
+ */
+
 /** Version number of this interface */
 #define FUSE_KERNEL_VERSION 7
 
 /** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 12
+#define FUSE_KERNEL_MINOR_VERSION 13
 
 /** The node ID of the root inode */
 #define FUSE_ROOT_ID 1
@@ -427,7 +451,8 @@ struct fuse_init_out {
 	__u32	minor;
 	__u32	max_readahead;
 	__u32	flags;
-	__u32	unused;
+	__u16   max_background;
+	__u16   congestion_threshold;
 	__u32	max_write;
 };
 
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 4759917adc71..ff037f0b1b4e 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -91,7 +91,6 @@ enum hrtimer_restart {
  * @function:	timer expiry callback function
  * @base:	pointer to the timer base (per cpu and per clock)
  * @state:	state information (See bit values above)
- * @cb_entry:	list head to enqueue an expired timer into the callback list
  * @start_site:	timer statistics field to store the site where the timer
  *		was started
  * @start_comm: timer statistics field to store the name of the process which
@@ -108,7 +107,6 @@ struct hrtimer {
 	enum hrtimer_restart		(*function)(struct hrtimer *);
 	struct hrtimer_clock_base	*base;
 	unsigned long			state;
-	struct list_head		cb_entry;
 #ifdef CONFIG_TIMER_STATS
 	int				start_pid;
 	void				*start_site;
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 3fd21d7cb6bf..2d02dfd7076c 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -223,19 +223,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 /* Power bus message definitions */
 
-#define DEV_GRP_NULL		0x0
-#define DEV_GRP_P1		0x1
-#define DEV_GRP_P2		0x2
-#define DEV_GRP_P3		0x4
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus.  See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
 
-#define RES_GRP_RES		0x0
-#define RES_GRP_PP		0x1
-#define RES_GRP_RC		0x2
+/* Processor groups */
+#define DEV_GRP_NULL		0x0
+#define DEV_GRP_P1		0x1	/* P1: all OMAP devices */
+#define DEV_GRP_P2		0x2	/* P2: all Modem devices */
+#define DEV_GRP_P3		0x4	/* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES		0x0	/* Reserved */
+#define RES_GRP_PP		0x1	/* Power providers */
+#define RES_GRP_RC		0x2	/* Reset and control */
 #define RES_GRP_PP_RC		0x3
-#define RES_GRP_PR		0x4
+#define RES_GRP_PR		0x4	/* Power references */
 #define RES_GRP_PP_PR		0x5
 #define RES_GRP_RC_PR		0x6
-#define RES_GRP_ALL		0x7
+#define RES_GRP_ALL		0x7	/* All resource groups */
 
 #define RES_TYPE2_R0		0x0
 
@@ -246,6 +255,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 #define RES_STATE_SLEEP		0x8
 #define RES_STATE_OFF		0x0
 
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1               1
+#define RES_VAUX2               2
+#define RES_VAUX3               3
+#define RES_VAUX4               4
+#define RES_VMMC1               5
+#define RES_VMMC2               6
+#define RES_VPLL1               7
+#define RES_VPLL2               8
+#define RES_VSIM                9
+#define RES_VDAC                10
+#define RES_VINTANA1            11
+#define RES_VINTANA2            12
+#define RES_VINTDIG             13
+#define RES_VIO                 14
+#define RES_VDD1                15
+#define RES_VDD2                16
+#define RES_VUSB_1V5            17
+#define RES_VUSB_1V8            18
+#define RES_VUSB_3V1            19
+#define RES_VUSBCP              20
+#define RES_REGEN               21
+/* Reset and control */
+#define RES_NRES_PWRON          22
+#define RES_CLKEN               23
+#define RES_SYSEN               24
+#define RES_HFCLKOUT            25
+#define RES_32KCLKOUT           26
+#define RES_RESET               27
+/* Power Reference */
+#define RES_Main_Ref            28
+
+#define TOTAL_RESOURCES		28
 /*
  * Power Bus Message Format ... these can be sent individually by Linux,
  * but are usually part of downloaded scripts that are run when various
@@ -327,6 +371,36 @@ struct twl4030_usb_data {
 	enum twl4030_usb_mode	usb_mode;
 };
 
+struct twl4030_ins {
+	u16 pmb_message;
+	u8 delay;
+};
+
+struct twl4030_script {
+	struct twl4030_ins *script;
+	unsigned size;
+	u8 flags;
+#define TWL4030_WRST_SCRIPT	(1<<0)
+#define TWL4030_WAKEUP12_SCRIPT	(1<<1)
+#define TWL4030_WAKEUP3_SCRIPT	(1<<2)
+#define TWL4030_SLEEP_SCRIPT	(1<<3)
+};
+
+struct twl4030_resconfig {
+	u8 resource;
+	u8 devgroup;	/* Processor group that Power resource belongs to */
+	u8 type;	/* Power resource addressed, 6 / broadcast message */
+	u8 type2;	/* Power resource addressed, 3 / broadcast message */
+};
+
+struct twl4030_power_data {
+	struct twl4030_script **scripts;
+	unsigned num;
+	struct twl4030_resconfig *resource_config;
+};
+
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+
 struct twl4030_platform_data {
 	unsigned				irq_base, irq_end;
 	struct twl4030_bci_platform_data	*bci;
@@ -334,6 +408,7 @@ struct twl4030_platform_data {
 	struct twl4030_madc_platform_data	*madc;
 	struct twl4030_keypad_data		*keypad;
 	struct twl4030_usb_data			*usb;
+	struct twl4030_power_data		*power;
 
 	/* LDO regulators */
 	struct regulator_init_data		*vdac;
@@ -364,7 +439,6 @@ int twl4030_sih_setup(int module);
 #define TWL4030_VAUX3_DEV_GRP		0x1F
 #define TWL4030_VAUX3_DEDICATED		0x22
 
-
 #if defined(CONFIG_TWL4030_BCI_BATTERY) || \
 	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
 	extern int twl4030charger_usb_en(int enable);
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 92fbd8cbd68f..fe158e0e20e6 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -233,6 +233,8 @@ extern void ip_mc_init_dev(struct in_device *);
 extern void ip_mc_destroy_dev(struct in_device *);
 extern void ip_mc_up(struct in_device *);
 extern void ip_mc_down(struct in_device *);
+extern void ip_mc_unmap(struct in_device *);
+extern void ip_mc_remap(struct in_device *);
 extern void ip_mc_dec_group(struct in_device *in_dev, __be32 addr);
 extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr);
 extern void ip_mc_rejoin_group(struct ip_mc_list *im);
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index c2049a04fa0b..a1187a0c99b4 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -446,7 +446,7 @@ struct transaction_s
 	/*
 	 * Where in the log does this transaction's commit start? [no locking]
 	 */
-	unsigned long		t_log_start;
+	unsigned int		t_log_start;
 
 	/* Number of buffers on the t_buffers list [j_list_lock] */
 	int			t_nr_buffers;
@@ -701,26 +701,26 @@ struct journal_s
 	 * Journal head: identifies the first unused block in the journal.
 	 * [j_state_lock]
 	 */
-	unsigned long		j_head;
+	unsigned int		j_head;
 
 	/*
 	 * Journal tail: identifies the oldest still-used block in the journal.
 	 * [j_state_lock]
 	 */
-	unsigned long		j_tail;
+	unsigned int		j_tail;
 
 	/*
 	 * Journal free: how many free blocks are there in the journal?
 	 * [j_state_lock]
 	 */
-	unsigned long		j_free;
+	unsigned int		j_free;
 
 	/*
 	 * Journal start and end: the block numbers of the first usable block
 	 * and one beyond the last usable block in the journal. [j_state_lock]
 	 */
-	unsigned long		j_first;
-	unsigned long		j_last;
+	unsigned int		j_first;
+	unsigned int		j_last;
 
 	/*
 	 * Device, blocksize and starting block offset for the location where we
@@ -728,7 +728,7 @@ struct journal_s
 	 */
 	struct block_device	*j_dev;
 	int			j_blocksize;
-	unsigned long		j_blk_offset;
+	unsigned int		j_blk_offset;
 
 	/*
 	 * Device which holds the client fs.  For internal journal this will be
@@ -859,7 +859,7 @@ extern void __journal_clean_data_list(transaction_t *transaction);
 
 /* Log buffer allocation */
 extern struct journal_head * journal_get_descriptor_buffer(journal_t *);
-int journal_next_log_block(journal_t *, unsigned long *);
+int journal_next_log_block(journal_t *, unsigned int *);
 
 /* Commit management */
 extern void journal_commit_transaction(journal_t *);
@@ -874,7 +874,7 @@ extern int
 journal_write_metadata_buffer(transaction_t	  *transaction,
 			      struct journal_head  *jh_in,
 			      struct journal_head **jh_out,
-			      unsigned long	   blocknr);
+			      unsigned int blocknr);
 
 /* Transaction locking */
 extern void		__wait_on_journal (journal_t *);
@@ -942,7 +942,7 @@ extern void	   journal_abort      (journal_t *, int);
 extern int	   journal_errno      (journal_t *);
 extern void	   journal_ack_err    (journal_t *);
 extern int	   journal_clear_err  (journal_t *);
-extern int	   journal_bmap(journal_t *, unsigned long, unsigned long *);
+extern int	   journal_bmap(journal_t *, unsigned int, unsigned int *);
 extern int	   journal_force_commit(journal_t *);
 
 /*
@@ -976,14 +976,14 @@ extern int	   journal_init_revoke_caches(void);
 
 extern void	   journal_destroy_revoke(journal_t *);
 extern int	   journal_revoke (handle_t *,
-				unsigned long, struct buffer_head *);
+				unsigned int, struct buffer_head *);
 extern int	   journal_cancel_revoke(handle_t *, struct journal_head *);
 extern void	   journal_write_revoke_records(journal_t *,
 						transaction_t *, int);
 
 /* Recovery revoke support */
-extern int	journal_set_revoke(journal_t *, unsigned long, tid_t);
-extern int	journal_test_revoke(journal_t *, unsigned long, tid_t);
+extern int	journal_set_revoke(journal_t *, unsigned int, tid_t);
+extern int	journal_test_revoke(journal_t *, unsigned int, tid_t);
 extern void	journal_clear_revoke(journal_t *);
 extern void	journal_switch_revoke_table(journal_t *journal);
 
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index bcd9c07848be..3a46b7b7abb2 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -48,13 +48,13 @@
 #define KPROBE_HIT_SSDONE	0x00000008
 
 /* Attach to insert probes on any functions which should be ignored*/
-#define __kprobes	__attribute__((__section__(".kprobes.text"))) notrace
+#define __kprobes	__attribute__((__section__(".kprobes.text")))
 #else /* CONFIG_KPROBES */
 typedef int kprobe_opcode_t;
 struct arch_specific_insn {
 	int dummy;
 };
-#define __kprobes	notrace
+#define __kprobes
 #endif /* CONFIG_KPROBES */
 
 struct kprobe;
diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h
index 7a3f316e3848..e9aa4c9d749d 100644
--- a/include/linux/mfd/ab3100.h
+++ b/include/linux/mfd/ab3100.h
@@ -6,6 +6,8 @@
  */
 
 #include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/regulator/machine.h>
 
 #ifndef MFD_AB3100_H
 #define MFD_AB3100_H
@@ -56,6 +58,14 @@
 #define AB3100_STR_BATT_REMOVAL				(0x40)
 #define AB3100_STR_VBUS					(0x80)
 
+/*
+ * AB3100 contains 8 regulators, one external regulator controller
+ * and a buck converter, further the LDO E and buck converter can
+ * have separate settings if they are in sleep mode, this is
+ * modeled as a separate regulator.
+ */
+#define AB3100_NUM_REGULATORS				10
+
 /**
  * struct ab3100
  * @access_mutex: lock out concurrent accesses to the AB3100 registers
@@ -86,11 +96,30 @@ struct ab3100 {
 	bool startup_events_read;
 };
 
-int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval);
-int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval);
-int ab3100_get_register_page(struct ab3100 *ab3100,
+/**
+ * struct ab3100_platform_data
+ * Data supplied to initialize board connections to the AB3100
+ * @reg_constraints: regulator constraints for target board
+ *     the order of these constraints are: LDO A, C, D, E,
+ *     F, G, H, K, EXT and BUCK.
+ * @reg_initvals: initial values for the regulator registers
+ *     plus two sleep settings for LDO E and the BUCK converter.
+ *     exactly AB3100_NUM_REGULATORS+2 values must be sent in.
+ *     Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
+ *     BUCK sleep, LDO D. (LDO D need to be initialized last.)
+ * @external_voltage: voltage level of the external regulator.
+ */
+struct ab3100_platform_data {
+	struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
+	u8 reg_initvals[AB3100_NUM_REGULATORS+2];
+	int external_voltage;
+};
+
+int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval);
+int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval);
+int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
 			     u8 first_reg, u8 *regvals, u8 numregs);
-int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
 				 u8 reg, u8 andmask, u8 ormask);
 u8 ab3100_get_chip_type(struct ab3100 *ab3100);
 int ab3100_event_register(struct ab3100 *ab3100,
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 49ef857cdb2d..11d740b8831d 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -23,6 +23,7 @@
  */
 struct mfd_cell {
 	const char		*name;
+	int			id;
 
 	int			(*enable)(struct platform_device *dev);
 	int			(*disable)(struct platform_device *dev);
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
index c12c3c0932bf..e5124ceea769 100644
--- a/include/linux/mfd/ezx-pcap.h
+++ b/include/linux/mfd/ezx-pcap.h
@@ -25,9 +25,12 @@ struct pcap_chip;
 
 int ezx_pcap_write(struct pcap_chip *, u8, u32);
 int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
+int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32);
 int pcap_to_irq(struct pcap_chip *, int);
+int irq_to_pcap(struct pcap_chip *, int);
 int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
 int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
+void pcap_set_ts_bits(struct pcap_chip *, u32);
 
 #define PCAP_SECOND_PORT	1
 #define PCAP_CS_AH		2
@@ -224,7 +227,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
 #define PCAP_LED1		1
 #define PCAP_BL0		2
 #define PCAP_BL1		3
-#define PCAP_VIB		4
 #define PCAP_LED_3MA		0
 #define PCAP_LED_4MA		1
 #define PCAP_LED_5MA		2
@@ -243,9 +245,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
 #define PCAP_LED0_C_SHIFT	15
 #define PCAP_LED1_C_SHIFT	17
 #define PCAP_BL1_SHIFT		20
-#define PCAP_VIB_MASK		0x3
-#define PCAP_VIB_SHIFT		20
-#define PCAP_VIB_EN		(1 << 19)
 
 /* RTC */
 #define PCAP_RTC_DAY_MASK	0x3fff
diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h
new file mode 100644
index 000000000000..47e698cb0f16
--- /dev/null
+++ b/include/linux/mfd/mc13783-private.h
@@ -0,0 +1,396 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_MFD_MC13783_PRIV_H
+#define __LINUX_MFD_MC13783_PRIV_H
+
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+
+struct mc13783_irq {
+	void (*handler)(int, void *);
+	void *data;
+};
+
+#define MC13783_NUM_IRQ		2
+#define MC13783_IRQ_TS		0
+#define MC13783_IRQ_REGULATOR	1
+
+#define MC13783_ADC_MODE_TS		1
+#define MC13783_ADC_MODE_SINGLE_CHAN	2
+#define MC13783_ADC_MODE_MULT_CHAN	3
+
+struct mc13783 {
+	int revision;
+	struct device *dev;
+	struct spi_device *spi_device;
+
+	int (*read_dev)(void *data, char reg, int count, u32 *dst);
+	int (*write_dev)(void *data, char reg, int count, const u32 *src);
+
+	struct mutex io_lock;
+	void *io_data;
+	int irq;
+	unsigned int flags;
+
+	struct mc13783_irq irq_handler[MC13783_NUM_IRQ];
+	struct work_struct work;
+	struct completion adc_done;
+	unsigned int ts_active;
+	struct mutex adc_conv_lock;
+
+	struct mc13783_regulator_init_data *regulators;
+	int num_regulators;
+};
+
+int mc13783_reg_read(struct mc13783 *, int reg_num, u32 *);
+int mc13783_reg_write(struct mc13783 *, int, u32);
+int mc13783_set_bits(struct mc13783 *, int, u32, u32);
+int mc13783_free_irq(struct mc13783 *mc13783, int irq);
+int mc13783_register_irq(struct mc13783 *mc13783, int irq,
+		void (*handler) (int, void *), void *data);
+
+#define MC13783_REG_INTERRUPT_STATUS_0		 0
+#define MC13783_REG_INTERRUPT_MASK_0		 1
+#define MC13783_REG_INTERRUPT_SENSE_0		 2
+#define MC13783_REG_INTERRUPT_STATUS_1		 3
+#define MC13783_REG_INTERRUPT_MASK_1		 4
+#define MC13783_REG_INTERRUPT_SENSE_1		 5
+#define MC13783_REG_POWER_UP_MODE_SENSE		 6
+#define MC13783_REG_REVISION			 7
+#define MC13783_REG_SEMAPHORE			 8
+#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9
+#define MC13783_REG_ARBITRATION_SWITCHERS	10
+#define MC13783_REG_ARBITRATION_REGULATORS_0	11
+#define MC13783_REG_ARBITRATION_REGULATORS_1	12
+#define MC13783_REG_POWER_CONTROL_0		13
+#define MC13783_REG_POWER_CONTROL_1		14
+#define MC13783_REG_POWER_CONTROL_2		15
+#define MC13783_REG_REGEN_ASSIGNMENT		16
+#define MC13783_REG_CONTROL_SPARE		17
+#define MC13783_REG_MEMORY_A			18
+#define MC13783_REG_MEMORY_B			19
+#define MC13783_REG_RTC_TIME			20
+#define MC13783_REG_RTC_ALARM			21
+#define MC13783_REG_RTC_DAY			22
+#define MC13783_REG_RTC_DAY_ALARM		23
+#define MC13783_REG_SWITCHERS_0			24
+#define MC13783_REG_SWITCHERS_1			25
+#define MC13783_REG_SWITCHERS_2			26
+#define MC13783_REG_SWITCHERS_3			27
+#define MC13783_REG_SWITCHERS_4			28
+#define MC13783_REG_SWITCHERS_5			29
+#define MC13783_REG_REGULATOR_SETTING_0		30
+#define MC13783_REG_REGULATOR_SETTING_1		31
+#define MC13783_REG_REGULATOR_MODE_0		32
+#define MC13783_REG_REGULATOR_MODE_1		33
+#define MC13783_REG_POWER_MISCELLANEOUS		34
+#define MC13783_REG_POWER_SPARE			35
+#define MC13783_REG_AUDIO_RX_0			36
+#define MC13783_REG_AUDIO_RX_1			37
+#define MC13783_REG_AUDIO_TX			38
+#define MC13783_REG_AUDIO_SSI_NETWORK		39
+#define MC13783_REG_AUDIO_CODEC			40
+#define MC13783_REG_AUDIO_STEREO_DAC		41
+#define MC13783_REG_AUDIO_SPARE			42
+#define MC13783_REG_ADC_0			43
+#define MC13783_REG_ADC_1			44
+#define MC13783_REG_ADC_2			45
+#define MC13783_REG_ADC_3			46
+#define MC13783_REG_ADC_4			47
+#define MC13783_REG_CHARGER			48
+#define MC13783_REG_USB				49
+#define MC13783_REG_CHARGE_USB_SPARE		50
+#define MC13783_REG_LED_CONTROL_0		51
+#define MC13783_REG_LED_CONTROL_1		52
+#define MC13783_REG_LED_CONTROL_2		53
+#define MC13783_REG_LED_CONTROL_3		54
+#define MC13783_REG_LED_CONTROL_4		55
+#define MC13783_REG_LED_CONTROL_5		56
+#define MC13783_REG_SPARE			57
+#define MC13783_REG_TRIM_0			58
+#define MC13783_REG_TRIM_1			59
+#define MC13783_REG_TEST_0			60
+#define MC13783_REG_TEST_1			61
+#define MC13783_REG_TEST_2			62
+#define MC13783_REG_TEST_3			63
+#define MC13783_REG_NB				64
+
+
+/*
+ * Interrupt Status
+ */
+#define MC13783_INT_STAT_ADCDONEI	(1 << 0)
+#define MC13783_INT_STAT_ADCBISDONEI	(1 << 1)
+#define MC13783_INT_STAT_TSI		(1 << 2)
+#define MC13783_INT_STAT_WHIGHI		(1 << 3)
+#define MC13783_INT_STAT_WLOWI		(1 << 4)
+#define MC13783_INT_STAT_CHGDETI	(1 << 6)
+#define MC13783_INT_STAT_CHGOVI		(1 << 7)
+#define MC13783_INT_STAT_CHGREVI	(1 << 8)
+#define MC13783_INT_STAT_CHGSHORTI	(1 << 9)
+#define MC13783_INT_STAT_CCCVI		(1 << 10)
+#define MC13783_INT_STAT_CHGCURRI	(1 << 11)
+#define MC13783_INT_STAT_BPONI		(1 << 12)
+#define MC13783_INT_STAT_LOBATLI	(1 << 13)
+#define MC13783_INT_STAT_LOBATHI	(1 << 14)
+#define MC13783_INT_STAT_UDPI		(1 << 15)
+#define MC13783_INT_STAT_USBI		(1 << 16)
+#define MC13783_INT_STAT_IDI		(1 << 19)
+#define MC13783_INT_STAT_Unused		(1 << 20)
+#define MC13783_INT_STAT_SE1I		(1 << 21)
+#define MC13783_INT_STAT_CKDETI		(1 << 22)
+#define MC13783_INT_STAT_UDMI		(1 << 23)
+
+/*
+ * Interrupt Mask
+ */
+#define MC13783_INT_MASK_ADCDONEM	(1 << 0)
+#define MC13783_INT_MASK_ADCBISDONEM	(1 << 1)
+#define MC13783_INT_MASK_TSM		(1 << 2)
+#define MC13783_INT_MASK_WHIGHM		(1 << 3)
+#define MC13783_INT_MASK_WLOWM		(1 << 4)
+#define MC13783_INT_MASK_CHGDETM	(1 << 6)
+#define MC13783_INT_MASK_CHGOVM		(1 << 7)
+#define MC13783_INT_MASK_CHGREVM	(1 << 8)
+#define MC13783_INT_MASK_CHGSHORTM	(1 << 9)
+#define MC13783_INT_MASK_CCCVM		(1 << 10)
+#define MC13783_INT_MASK_CHGCURRM	(1 << 11)
+#define MC13783_INT_MASK_BPONM		(1 << 12)
+#define MC13783_INT_MASK_LOBATLM	(1 << 13)
+#define MC13783_INT_MASK_LOBATHM	(1 << 14)
+#define MC13783_INT_MASK_UDPM		(1 << 15)
+#define MC13783_INT_MASK_USBM		(1 << 16)
+#define MC13783_INT_MASK_IDM		(1 << 19)
+#define MC13783_INT_MASK_SE1M		(1 << 21)
+#define MC13783_INT_MASK_CKDETM		(1 << 22)
+
+/*
+ * Reg Regulator Mode 0
+ */
+#define MC13783_REGCTRL_VAUDIO_EN	(1 << 0)
+#define MC13783_REGCTRL_VAUDIO_STBY	(1 << 1)
+#define MC13783_REGCTRL_VAUDIO_MODE	(1 << 2)
+#define MC13783_REGCTRL_VIOHI_EN	(1 << 3)
+#define MC13783_REGCTRL_VIOHI_STBY	(1 << 4)
+#define MC13783_REGCTRL_VIOHI_MODE	(1 << 5)
+#define MC13783_REGCTRL_VIOLO_EN	(1 << 6)
+#define MC13783_REGCTRL_VIOLO_STBY 	(1 << 7)
+#define MC13783_REGCTRL_VIOLO_MODE	(1 << 8)
+#define MC13783_REGCTRL_VDIG_EN		(1 << 9)
+#define MC13783_REGCTRL_VDIG_STBY	(1 << 10)
+#define MC13783_REGCTRL_VDIG_MODE	(1 << 11)
+#define MC13783_REGCTRL_VGEN_EN		(1 << 12)
+#define MC13783_REGCTRL_VGEN_STBY	(1 << 13)
+#define MC13783_REGCTRL_VGEN_MODE	(1 << 14)
+#define MC13783_REGCTRL_VRFDIG_EN	(1 << 15)
+#define MC13783_REGCTRL_VRFDIG_STBY	(1 << 16)
+#define MC13783_REGCTRL_VRFDIG_MODE	(1 << 17)
+#define MC13783_REGCTRL_VRFREF_EN	(1 << 18)
+#define MC13783_REGCTRL_VRFREF_STBY	(1 << 19)
+#define MC13783_REGCTRL_VRFREF_MODE	(1 << 20)
+#define MC13783_REGCTRL_VRFCP_EN	(1 << 21)
+#define MC13783_REGCTRL_VRFCP_STBY	(1 << 22)
+#define MC13783_REGCTRL_VRFCP_MODE	(1 << 23)
+
+/*
+ * Reg Regulator Mode 1
+ */
+#define MC13783_REGCTRL_VSIM_EN		(1 << 0)
+#define MC13783_REGCTRL_VSIM_STBY	(1 << 1)
+#define MC13783_REGCTRL_VSIM_MODE	(1 << 2)
+#define MC13783_REGCTRL_VESIM_EN	(1 << 3)
+#define MC13783_REGCTRL_VESIM_STBY	(1 << 4)
+#define MC13783_REGCTRL_VESIM_MODE	(1 << 5)
+#define MC13783_REGCTRL_VCAM_EN		(1 << 6)
+#define MC13783_REGCTRL_VCAM_STBY	(1 << 7)
+#define MC13783_REGCTRL_VCAM_MODE	(1 << 8)
+#define	MC13783_REGCTRL_VRFBG_EN	(1 << 9)
+#define MC13783_REGCTRL_VRFBG_STBY	(1 << 10)
+#define MC13783_REGCTRL_VVIB_EN		(1 << 11)
+#define MC13783_REGCTRL_VRF1_EN		(1 << 12)
+#define MC13783_REGCTRL_VRF1_STBY	(1 << 13)
+#define MC13783_REGCTRL_VRF1_MODE	(1 << 14)
+#define MC13783_REGCTRL_VRF2_EN		(1 << 15)
+#define MC13783_REGCTRL_VRF2_STBY	(1 << 16)
+#define MC13783_REGCTRL_VRF2_MODE	(1 << 17)
+#define MC13783_REGCTRL_VMMC1_EN	(1 << 18)
+#define MC13783_REGCTRL_VMMC1_STBY	(1 << 19)
+#define MC13783_REGCTRL_VMMC1_MODE	(1 << 20)
+#define MC13783_REGCTRL_VMMC2_EN	(1 << 21)
+#define MC13783_REGCTRL_VMMC2_STBY	(1 << 22)
+#define MC13783_REGCTRL_VMMC2_MODE	(1 << 23)
+
+/*
+ * Reg Regulator Misc.
+ */
+#define MC13783_REGCTRL_GPO1_EN		(1 << 6)
+#define MC13783_REGCTRL_GPO2_EN		(1 << 8)
+#define MC13783_REGCTRL_GPO3_EN		(1 << 10)
+#define MC13783_REGCTRL_GPO4_EN		(1 << 12)
+#define MC13783_REGCTRL_VIBPINCTRL	(1 << 14)
+
+/*
+ * Reg Switcher 4
+ */
+#define MC13783_SWCTRL_SW1A_MODE	(1 << 0)
+#define MC13783_SWCTRL_SW1A_STBY_MODE	(1 << 2)
+#define MC13783_SWCTRL_SW1A_DVS_SPEED	(1 << 6)
+#define MC13783_SWCTRL_SW1A_PANIC_MODE	(1 << 8)
+#define MC13783_SWCTRL_SW1A_SOFTSTART	(1 << 9)
+#define MC13783_SWCTRL_SW1B_MODE	(1 << 10)
+#define MC13783_SWCTRL_SW1B_STBY_MODE	(1 << 12)
+#define MC13783_SWCTRL_SW1B_DVS_SPEED	(1 << 14)
+#define MC13783_SWCTRL_SW1B_PANIC_MODE	(1 << 16)
+#define MC13783_SWCTRL_SW1B_SOFTSTART	(1 << 17)
+#define MC13783_SWCTRL_PLL_EN		(1 << 18)
+#define MC13783_SWCTRL_PLL_FACTOR	(1 << 19)
+
+/*
+ * Reg Switcher 5
+ */
+#define MC13783_SWCTRL_SW2A_MODE	(1 << 0)
+#define MC13783_SWCTRL_SW2A_STBY_MODE	(1 << 2)
+#define MC13783_SWCTRL_SW2A_DVS_SPEED	(1 << 6)
+#define MC13783_SWCTRL_SW2A_PANIC_MODE	(1 << 8)
+#define MC13783_SWCTRL_SW2A_SOFTSTART	(1 << 9)
+#define MC13783_SWCTRL_SW2B_MODE	(1 << 10)
+#define MC13783_SWCTRL_SW2B_STBY_MODE	(1 << 12)
+#define MC13783_SWCTRL_SW2B_DVS_SPEED	(1 << 14)
+#define MC13783_SWCTRL_SW2B_PANIC_MODE	(1 << 16)
+#define MC13783_SWCTRL_SW2B_SOFTSTART	(1 << 17)
+#define MC13783_SWSET_SW3		(1 << 18)
+#define MC13783_SWCTRL_SW3_EN		(1 << 20)
+#define MC13783_SWCTRL_SW3_STBY		(1 << 21)
+#define MC13783_SWCTRL_SW3_MODE		(1 << 22)
+
+/*
+ * ADC/Touch
+ */
+#define MC13783_ADC0_LICELLCON		(1 << 0)
+#define MC13783_ADC0_CHRGICON		(1 << 1)
+#define MC13783_ADC0_BATICON		(1 << 2)
+#define MC13783_ADC0_RTHEN 		(1 << 3)
+#define MC13783_ADC0_DTHEN		(1 << 4)
+#define MC13783_ADC0_UIDEN		(1 << 5)
+#define MC13783_ADC0_ADOUTEN 		(1 << 6)
+#define MC13783_ADC0_ADOUTPER		(1 << 7)
+#define MC13783_ADC0_ADREFEN		(1 << 10)
+#define MC13783_ADC0_ADREFMODE		(1 << 11)
+#define MC13783_ADC0_TSMOD0		(1 << 12)
+#define MC13783_ADC0_TSMOD1		(1 << 13)
+#define MC13783_ADC0_TSMOD2		(1 << 14)
+#define MC13783_ADC0_CHRGRAWDIV		(1 << 15)
+#define MC13783_ADC0_ADINC1		(1 << 16)
+#define MC13783_ADC0_ADINC2		(1 << 17)
+#define MC13783_ADC0_WCOMP		(1 << 18)
+#define MC13783_ADC0_ADCBIS0		(1 << 23)
+
+#define MC13783_ADC1_ADEN		(1 << 0)
+#define MC13783_ADC1_RAND		(1 << 1)
+#define MC13783_ADC1_ADSEL		(1 << 3)
+#define MC13783_ADC1_TRIGMASK		(1 << 4)
+#define MC13783_ADC1_ADA10		(1 << 5)
+#define MC13783_ADC1_ADA11		(1 << 6)
+#define MC13783_ADC1_ADA12		(1 << 7)
+#define MC13783_ADC1_ADA20		(1 << 8)
+#define MC13783_ADC1_ADA21		(1 << 9)
+#define MC13783_ADC1_ADA22		(1 << 10)
+#define MC13783_ADC1_ATO0		(1 << 11)
+#define MC13783_ADC1_ATO1		(1 << 12)
+#define MC13783_ADC1_ATO2		(1 << 13)
+#define MC13783_ADC1_ATO3		(1 << 14)
+#define MC13783_ADC1_ATO4		(1 << 15)
+#define MC13783_ADC1_ATO5		(1 << 16)
+#define MC13783_ADC1_ATO6		(1 << 17)
+#define MC13783_ADC1_ATO7		(1 << 18)
+#define MC13783_ADC1_ATOX		(1 << 19)
+#define MC13783_ADC1_ASC		(1 << 20)
+#define MC13783_ADC1_ADTRIGIGN		(1 << 21)
+#define MC13783_ADC1_ADONESHOT		(1 << 22)
+#define MC13783_ADC1_ADCBIS1		(1 << 23)
+
+#define MC13783_ADC1_CHAN0_SHIFT	5
+#define MC13783_ADC1_CHAN1_SHIFT	8
+
+#define MC13783_ADC2_ADD10		(1 << 2)
+#define MC13783_ADC2_ADD11		(1 << 3)
+#define MC13783_ADC2_ADD12		(1 << 4)
+#define MC13783_ADC2_ADD13		(1 << 5)
+#define MC13783_ADC2_ADD14		(1 << 6)
+#define MC13783_ADC2_ADD15		(1 << 7)
+#define MC13783_ADC2_ADD16		(1 << 8)
+#define MC13783_ADC2_ADD17		(1 << 9)
+#define MC13783_ADC2_ADD18		(1 << 10)
+#define MC13783_ADC2_ADD19		(1 << 11)
+#define MC13783_ADC2_ADD20		(1 << 14)
+#define MC13783_ADC2_ADD21		(1 << 15)
+#define MC13783_ADC2_ADD22		(1 << 16)
+#define MC13783_ADC2_ADD23		(1 << 17)
+#define MC13783_ADC2_ADD24		(1 << 18)
+#define MC13783_ADC2_ADD25		(1 << 19)
+#define MC13783_ADC2_ADD26		(1 << 20)
+#define MC13783_ADC2_ADD27		(1 << 21)
+#define MC13783_ADC2_ADD28		(1 << 22)
+#define MC13783_ADC2_ADD29		(1 << 23)
+
+#define MC13783_ADC3_WHIGH0		(1 << 0)
+#define MC13783_ADC3_WHIGH1		(1 << 1)
+#define MC13783_ADC3_WHIGH2		(1 << 2)
+#define MC13783_ADC3_WHIGH3		(1 << 3)
+#define MC13783_ADC3_WHIGH4		(1 << 4)
+#define MC13783_ADC3_WHIGH5		(1 << 5)
+#define MC13783_ADC3_ICID0		(1 << 6)
+#define MC13783_ADC3_ICID1		(1 << 7)
+#define MC13783_ADC3_ICID2		(1 << 8)
+#define MC13783_ADC3_WLOW0		(1 << 9)
+#define MC13783_ADC3_WLOW1		(1 << 10)
+#define MC13783_ADC3_WLOW2		(1 << 11)
+#define MC13783_ADC3_WLOW3		(1 << 12)
+#define MC13783_ADC3_WLOW4		(1 << 13)
+#define MC13783_ADC3_WLOW5		(1 << 14)
+#define MC13783_ADC3_ADCBIS2		(1 << 23)
+
+#define MC13783_ADC4_ADDBIS10		(1 << 2)
+#define MC13783_ADC4_ADDBIS11		(1 << 3)
+#define MC13783_ADC4_ADDBIS12		(1 << 4)
+#define MC13783_ADC4_ADDBIS13		(1 << 5)
+#define MC13783_ADC4_ADDBIS14		(1 << 6)
+#define MC13783_ADC4_ADDBIS15		(1 << 7)
+#define MC13783_ADC4_ADDBIS16		(1 << 8)
+#define MC13783_ADC4_ADDBIS17		(1 << 9)
+#define MC13783_ADC4_ADDBIS18		(1 << 10)
+#define MC13783_ADC4_ADDBIS19		(1 << 11)
+#define MC13783_ADC4_ADDBIS20		(1 << 14)
+#define MC13783_ADC4_ADDBIS21		(1 << 15)
+#define MC13783_ADC4_ADDBIS22		(1 << 16)
+#define MC13783_ADC4_ADDBIS23		(1 << 17)
+#define MC13783_ADC4_ADDBIS24		(1 << 18)
+#define MC13783_ADC4_ADDBIS25		(1 << 19)
+#define MC13783_ADC4_ADDBIS26		(1 << 20)
+#define MC13783_ADC4_ADDBIS27		(1 << 21)
+#define MC13783_ADC4_ADDBIS28		(1 << 22)
+#define MC13783_ADC4_ADDBIS29		(1 << 23)
+
+#endif /* __LINUX_MFD_MC13783_PRIV_H */
+
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
new file mode 100644
index 000000000000..b3a2a7243573
--- /dev/null
+++ b/include/linux/mfd/mc13783.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __INCLUDE_LINUX_MFD_MC13783_H
+#define __INCLUDE_LINUX_MFD_MC13783_H
+
+struct mc13783;
+struct regulator_init_data;
+
+struct mc13783_regulator_init_data {
+	int id;
+	struct regulator_init_data *init_data;
+};
+
+struct mc13783_platform_data {
+	struct mc13783_regulator_init_data *regulators;
+	int num_regulators;
+	unsigned int flags;
+};
+
+/* mc13783_platform_data flags */
+#define MC13783_USE_TOUCHSCREEN (1 << 0)
+#define MC13783_USE_CODEC	(1 << 1)
+#define MC13783_USE_ADC		(1 << 2)
+#define MC13783_USE_RTC		(1 << 3)
+#define MC13783_USE_REGULATOR	(1 << 4)
+
+int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+		unsigned int channel, unsigned int *sample);
+
+void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status);
+
+#define	MC13783_SW_SW1A		0
+#define	MC13783_SW_SW1B		1
+#define	MC13783_SW_SW2A		2
+#define	MC13783_SW_SW2B		3
+#define	MC13783_SW_SW3		4
+#define	MC13783_SW_PLL		5
+#define	MC13783_REGU_VAUDIO	6
+#define	MC13783_REGU_VIOHI	7
+#define	MC13783_REGU_VIOLO	8
+#define	MC13783_REGU_VDIG	9
+#define	MC13783_REGU_VGEN	10
+#define	MC13783_REGU_VRFDIG	11
+#define	MC13783_REGU_VRFREF	12
+#define	MC13783_REGU_VRFCP	13
+#define	MC13783_REGU_VSIM	14
+#define	MC13783_REGU_VESIM	15
+#define	MC13783_REGU_VCAM	16
+#define	MC13783_REGU_VRFBG	17
+#define	MC13783_REGU_VVIB	18
+#define	MC13783_REGU_VRF1	19
+#define	MC13783_REGU_VRF2	20
+#define	MC13783_REGU_VMMC1	21
+#define	MC13783_REGU_VMMC2	22
+#define	MC13783_REGU_GPO1	23
+#define	MC13783_REGU_GPO2	24
+#define	MC13783_REGU_GPO3	25
+#define	MC13783_REGU_GPO4	26
+#define	MC13783_REGU_V1		27
+#define	MC13783_REGU_V2		28
+#define	MC13783_REGU_V3		29
+#define	MC13783_REGU_V4		30
+
+#endif /* __INCLUDE_LINUX_MFD_MC13783_H */
+
diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h
index 56669b4183ad..b35e62801ffa 100644
--- a/include/linux/mfd/pcf50633/adc.h
+++ b/include/linux/mfd/pcf50633/adc.h
@@ -25,7 +25,8 @@
 #define PCF50633_REG_ADCS3		0x57
 
 #define PCF50633_ADCC1_ADCSTART		0x01
-#define PCF50633_ADCC1_RES_10BIT	0x02
+#define PCF50633_ADCC1_RES_8BIT		0x02
+#define PCF50633_ADCC1_RES_10BIT	0x00
 #define PCF50633_ADCC1_AVERAGE_NO	0x00
 #define PCF50633_ADCC1_AVERAGE_4	0x04
 #define PCF50633_ADCC1_AVERAGE_8	0x08
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index c8f51c3c0a72..9aba7b779fbc 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -136,6 +136,7 @@ struct pcf50633 {
 	int irq;
 	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
 	struct work_struct irq_work;
+	struct workqueue_struct *work_queue;
 	struct mutex lock;
 
 	u8 mask_regs[5];
diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h
new file mode 100644
index 000000000000..b132067e9e99
--- /dev/null
+++ b/include/linux/mfd/wm831x/auxadc.h
@@ -0,0 +1,216 @@
+/*
+ * include/linux/mfd/wm831x/auxadc.h -- Auxiliary ADC interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_AUXADC_H__
+#define __MFD_WM831X_AUXADC_H__
+
+/*
+ * R16429 (0x402D) - AuxADC Data
+ */
+#define WM831X_AUX_DATA_SRC_MASK                0xF000  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_SHIFT                   12  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_WIDTH                    4  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_MASK                    0x0FFF  /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_SHIFT                        0  /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_WIDTH                       12  /* AUX_DATA - [11:0] */
+
+/*
+ * R16430 (0x402E) - AuxADC Control
+ */
+#define WM831X_AUX_ENA                          0x8000  /* AUX_ENA */
+#define WM831X_AUX_ENA_MASK                     0x8000  /* AUX_ENA */
+#define WM831X_AUX_ENA_SHIFT                        15  /* AUX_ENA */
+#define WM831X_AUX_ENA_WIDTH                         1  /* AUX_ENA */
+#define WM831X_AUX_CVT_ENA                      0x4000  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_MASK                 0x4000  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_SHIFT                    14  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_WIDTH                     1  /* AUX_CVT_ENA */
+#define WM831X_AUX_SLPENA                       0x1000  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_MASK                  0x1000  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_SHIFT                     12  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_WIDTH                      1  /* AUX_SLPENA */
+#define WM831X_AUX_FRC_ENA                      0x0800  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_MASK                 0x0800  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_SHIFT                    11  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_WIDTH                     1  /* AUX_FRC_ENA */
+#define WM831X_AUX_RATE_MASK                    0x003F  /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_SHIFT                        0  /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_WIDTH                        6  /* AUX_RATE - [5:0] */
+
+/*
+ * R16431 (0x402F) - AuxADC Source
+ */
+#define WM831X_AUX_CAL_SEL                      0x8000  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_MASK                 0x8000  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_SHIFT                    15  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_WIDTH                     1  /* AUX_CAL_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL                0x0400  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_MASK           0x0400  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_SHIFT              10  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_WIDTH               1  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_WALL_SEL                     0x0200  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_MASK                0x0200  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_SHIFT                    9  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_WIDTH                    1  /* AUX_WALL_SEL */
+#define WM831X_AUX_BATT_SEL                     0x0100  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_MASK                0x0100  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_SHIFT                    8  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_WIDTH                    1  /* AUX_BATT_SEL */
+#define WM831X_AUX_USB_SEL                      0x0080  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_MASK                 0x0080  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_SHIFT                     7  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_WIDTH                     1  /* AUX_USB_SEL */
+#define WM831X_AUX_SYSVDD_SEL                   0x0040  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_MASK              0x0040  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_SHIFT                  6  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_WIDTH                  1  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL                0x0020  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_MASK           0x0020  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_SHIFT               5  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_WIDTH               1  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL                0x0010  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_MASK           0x0010  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_SHIFT               4  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_WIDTH               1  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_AUX4_SEL                     0x0008  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_MASK                0x0008  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_SHIFT                    3  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_WIDTH                    1  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX3_SEL                     0x0004  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_MASK                0x0004  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_SHIFT                    2  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_WIDTH                    1  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX2_SEL                     0x0002  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_MASK                0x0002  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_SHIFT                    1  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_WIDTH                    1  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX1_SEL                     0x0001  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_MASK                0x0001  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_SHIFT                    0  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_WIDTH                    1  /* AUX_AUX1_SEL */
+
+/*
+ * R16432 (0x4030) - Comparator Control
+ */
+#define WM831X_DCOMP4_STS                       0x0800  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_MASK                  0x0800  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_SHIFT                     11  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_WIDTH                      1  /* DCOMP4_STS */
+#define WM831X_DCOMP3_STS                       0x0400  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_MASK                  0x0400  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_SHIFT                     10  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_WIDTH                      1  /* DCOMP3_STS */
+#define WM831X_DCOMP2_STS                       0x0200  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_MASK                  0x0200  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_SHIFT                      9  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_WIDTH                      1  /* DCOMP2_STS */
+#define WM831X_DCOMP1_STS                       0x0100  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_MASK                  0x0100  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_SHIFT                      8  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_WIDTH                      1  /* DCOMP1_STS */
+#define WM831X_DCMP4_ENA                        0x0008  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_MASK                   0x0008  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_SHIFT                       3  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_WIDTH                       1  /* DCMP4_ENA */
+#define WM831X_DCMP3_ENA                        0x0004  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_MASK                   0x0004  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_SHIFT                       2  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_WIDTH                       1  /* DCMP3_ENA */
+#define WM831X_DCMP2_ENA                        0x0002  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_MASK                   0x0002  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_SHIFT                       1  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_WIDTH                       1  /* DCMP2_ENA */
+#define WM831X_DCMP1_ENA                        0x0001  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_MASK                   0x0001  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_SHIFT                       0  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_WIDTH                       1  /* DCMP1_ENA */
+
+/*
+ * R16433 (0x4031) - Comparator 1
+ */
+#define WM831X_DCMP1_SRC_MASK                   0xE000  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_SHIFT                      13  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_WIDTH                       3  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_GT                         0x1000  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_MASK                    0x1000  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_SHIFT                       12  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_WIDTH                        1  /* DCMP1_GT */
+#define WM831X_DCMP1_THR_MASK                   0x0FFF  /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_SHIFT                       0  /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_WIDTH                      12  /* DCMP1_THR - [11:0] */
+
+/*
+ * R16434 (0x4032) - Comparator 2
+ */
+#define WM831X_DCMP2_SRC_MASK                   0xE000  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_SHIFT                      13  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_WIDTH                       3  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_GT                         0x1000  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_MASK                    0x1000  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_SHIFT                       12  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_WIDTH                        1  /* DCMP2_GT */
+#define WM831X_DCMP2_THR_MASK                   0x0FFF  /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_SHIFT                       0  /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_WIDTH                      12  /* DCMP2_THR - [11:0] */
+
+/*
+ * R16435 (0x4033) - Comparator 3
+ */
+#define WM831X_DCMP3_SRC_MASK                   0xE000  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_SHIFT                      13  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_WIDTH                       3  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_GT                         0x1000  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_MASK                    0x1000  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_SHIFT                       12  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_WIDTH                        1  /* DCMP3_GT */
+#define WM831X_DCMP3_THR_MASK                   0x0FFF  /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_SHIFT                       0  /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_WIDTH                      12  /* DCMP3_THR - [11:0] */
+
+/*
+ * R16436 (0x4034) - Comparator 4
+ */
+#define WM831X_DCMP4_SRC_MASK                   0xE000  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_SHIFT                      13  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_WIDTH                       3  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_GT                         0x1000  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_MASK                    0x1000  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_SHIFT                       12  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_WIDTH                        1  /* DCMP4_GT */
+#define WM831X_DCMP4_THR_MASK                   0x0FFF  /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_SHIFT                       0  /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_WIDTH                      12  /* DCMP4_THR - [11:0] */
+
+#define WM831X_AUX_CAL_FACTOR  0xfff
+#define WM831X_AUX_CAL_NOMINAL 0x222
+
+enum wm831x_auxadc {
+	WM831X_AUX_CAL = 15,
+	WM831X_AUX_BKUP_BATT = 10,
+	WM831X_AUX_WALL = 9,
+	WM831X_AUX_BATT = 8,
+	WM831X_AUX_USB = 7,
+	WM831X_AUX_SYSVDD = 6,
+	WM831X_AUX_BATT_TEMP = 5,
+	WM831X_AUX_CHIP_TEMP = 4,
+	WM831X_AUX_AUX4 = 3,
+	WM831X_AUX_AUX3 = 2,
+	WM831X_AUX_AUX2 = 1,
+	WM831X_AUX_AUX1 = 0,
+};
+
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input);
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input);
+
+#endif
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
new file mode 100644
index 000000000000..91eb493bf14c
--- /dev/null
+++ b/include/linux/mfd/wm831x/core.h
@@ -0,0 +1,289 @@
+/*
+ * include/linux/mfd/wm831x/core.h -- Core interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_CORE_H__
+#define __MFD_WM831X_CORE_H__
+
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
+/*
+ * Register values.
+ */
+#define WM831X_RESET_ID                         0x00
+#define WM831X_REVISION                         0x01
+#define WM831X_PARENT_ID                        0x4000
+#define WM831X_SYSVDD_CONTROL                   0x4001
+#define WM831X_THERMAL_MONITORING               0x4002
+#define WM831X_POWER_STATE                      0x4003
+#define WM831X_WATCHDOG                         0x4004
+#define WM831X_ON_PIN_CONTROL                   0x4005
+#define WM831X_RESET_CONTROL                    0x4006
+#define WM831X_CONTROL_INTERFACE                0x4007
+#define WM831X_SECURITY_KEY                     0x4008
+#define WM831X_SOFTWARE_SCRATCH                 0x4009
+#define WM831X_OTP_CONTROL                      0x400A
+#define WM831X_GPIO_LEVEL                       0x400C
+#define WM831X_SYSTEM_STATUS                    0x400D
+#define WM831X_ON_SOURCE                        0x400E
+#define WM831X_OFF_SOURCE                       0x400F
+#define WM831X_SYSTEM_INTERRUPTS                0x4010
+#define WM831X_INTERRUPT_STATUS_1               0x4011
+#define WM831X_INTERRUPT_STATUS_2               0x4012
+#define WM831X_INTERRUPT_STATUS_3               0x4013
+#define WM831X_INTERRUPT_STATUS_4               0x4014
+#define WM831X_INTERRUPT_STATUS_5               0x4015
+#define WM831X_IRQ_CONFIG                       0x4017
+#define WM831X_SYSTEM_INTERRUPTS_MASK           0x4018
+#define WM831X_INTERRUPT_STATUS_1_MASK          0x4019
+#define WM831X_INTERRUPT_STATUS_2_MASK          0x401A
+#define WM831X_INTERRUPT_STATUS_3_MASK          0x401B
+#define WM831X_INTERRUPT_STATUS_4_MASK          0x401C
+#define WM831X_INTERRUPT_STATUS_5_MASK          0x401D
+#define WM831X_RTC_WRITE_COUNTER                0x4020
+#define WM831X_RTC_TIME_1                       0x4021
+#define WM831X_RTC_TIME_2                       0x4022
+#define WM831X_RTC_ALARM_1                      0x4023
+#define WM831X_RTC_ALARM_2                      0x4024
+#define WM831X_RTC_CONTROL                      0x4025
+#define WM831X_RTC_TRIM                         0x4026
+#define WM831X_TOUCH_CONTROL_1                  0x4028
+#define WM831X_TOUCH_CONTROL_2                  0x4029
+#define WM831X_TOUCH_DATA_X                     0x402A
+#define WM831X_TOUCH_DATA_Y                     0x402B
+#define WM831X_TOUCH_DATA_Z                     0x402C
+#define WM831X_AUXADC_DATA                      0x402D
+#define WM831X_AUXADC_CONTROL                   0x402E
+#define WM831X_AUXADC_SOURCE                    0x402F
+#define WM831X_COMPARATOR_CONTROL               0x4030
+#define WM831X_COMPARATOR_1                     0x4031
+#define WM831X_COMPARATOR_2                     0x4032
+#define WM831X_COMPARATOR_3                     0x4033
+#define WM831X_COMPARATOR_4                     0x4034
+#define WM831X_GPIO1_CONTROL                    0x4038
+#define WM831X_GPIO2_CONTROL                    0x4039
+#define WM831X_GPIO3_CONTROL                    0x403A
+#define WM831X_GPIO4_CONTROL                    0x403B
+#define WM831X_GPIO5_CONTROL                    0x403C
+#define WM831X_GPIO6_CONTROL                    0x403D
+#define WM831X_GPIO7_CONTROL                    0x403E
+#define WM831X_GPIO8_CONTROL                    0x403F
+#define WM831X_GPIO9_CONTROL                    0x4040
+#define WM831X_GPIO10_CONTROL                   0x4041
+#define WM831X_GPIO11_CONTROL                   0x4042
+#define WM831X_GPIO12_CONTROL                   0x4043
+#define WM831X_GPIO13_CONTROL                   0x4044
+#define WM831X_GPIO14_CONTROL                   0x4045
+#define WM831X_GPIO15_CONTROL                   0x4046
+#define WM831X_GPIO16_CONTROL                   0x4047
+#define WM831X_CHARGER_CONTROL_1                0x4048
+#define WM831X_CHARGER_CONTROL_2                0x4049
+#define WM831X_CHARGER_STATUS                   0x404A
+#define WM831X_BACKUP_CHARGER_CONTROL           0x404B
+#define WM831X_STATUS_LED_1                     0x404C
+#define WM831X_STATUS_LED_2                     0x404D
+#define WM831X_CURRENT_SINK_1                   0x404E
+#define WM831X_CURRENT_SINK_2                   0x404F
+#define WM831X_DCDC_ENABLE                      0x4050
+#define WM831X_LDO_ENABLE                       0x4051
+#define WM831X_DCDC_STATUS                      0x4052
+#define WM831X_LDO_STATUS                       0x4053
+#define WM831X_DCDC_UV_STATUS                   0x4054
+#define WM831X_LDO_UV_STATUS                    0x4055
+#define WM831X_DC1_CONTROL_1                    0x4056
+#define WM831X_DC1_CONTROL_2                    0x4057
+#define WM831X_DC1_ON_CONFIG                    0x4058
+#define WM831X_DC1_SLEEP_CONTROL                0x4059
+#define WM831X_DC1_DVS_CONTROL                  0x405A
+#define WM831X_DC2_CONTROL_1                    0x405B
+#define WM831X_DC2_CONTROL_2                    0x405C
+#define WM831X_DC2_ON_CONFIG                    0x405D
+#define WM831X_DC2_SLEEP_CONTROL                0x405E
+#define WM831X_DC2_DVS_CONTROL                  0x405F
+#define WM831X_DC3_CONTROL_1                    0x4060
+#define WM831X_DC3_CONTROL_2                    0x4061
+#define WM831X_DC3_ON_CONFIG                    0x4062
+#define WM831X_DC3_SLEEP_CONTROL                0x4063
+#define WM831X_DC4_CONTROL                      0x4064
+#define WM831X_DC4_SLEEP_CONTROL                0x4065
+#define WM831X_EPE1_CONTROL                     0x4066
+#define WM831X_EPE2_CONTROL                     0x4067
+#define WM831X_LDO1_CONTROL                     0x4068
+#define WM831X_LDO1_ON_CONTROL                  0x4069
+#define WM831X_LDO1_SLEEP_CONTROL               0x406A
+#define WM831X_LDO2_CONTROL                     0x406B
+#define WM831X_LDO2_ON_CONTROL                  0x406C
+#define WM831X_LDO2_SLEEP_CONTROL               0x406D
+#define WM831X_LDO3_CONTROL                     0x406E
+#define WM831X_LDO3_ON_CONTROL                  0x406F
+#define WM831X_LDO3_SLEEP_CONTROL               0x4070
+#define WM831X_LDO4_CONTROL                     0x4071
+#define WM831X_LDO4_ON_CONTROL                  0x4072
+#define WM831X_LDO4_SLEEP_CONTROL               0x4073
+#define WM831X_LDO5_CONTROL                     0x4074
+#define WM831X_LDO5_ON_CONTROL                  0x4075
+#define WM831X_LDO5_SLEEP_CONTROL               0x4076
+#define WM831X_LDO6_CONTROL                     0x4077
+#define WM831X_LDO6_ON_CONTROL                  0x4078
+#define WM831X_LDO6_SLEEP_CONTROL               0x4079
+#define WM831X_LDO7_CONTROL                     0x407A
+#define WM831X_LDO7_ON_CONTROL                  0x407B
+#define WM831X_LDO7_SLEEP_CONTROL               0x407C
+#define WM831X_LDO8_CONTROL                     0x407D
+#define WM831X_LDO8_ON_CONTROL                  0x407E
+#define WM831X_LDO8_SLEEP_CONTROL               0x407F
+#define WM831X_LDO9_CONTROL                     0x4080
+#define WM831X_LDO9_ON_CONTROL                  0x4081
+#define WM831X_LDO9_SLEEP_CONTROL               0x4082
+#define WM831X_LDO10_CONTROL                    0x4083
+#define WM831X_LDO10_ON_CONTROL                 0x4084
+#define WM831X_LDO10_SLEEP_CONTROL              0x4085
+#define WM831X_LDO11_ON_CONTROL                 0x4087
+#define WM831X_LDO11_SLEEP_CONTROL              0x4088
+#define WM831X_POWER_GOOD_SOURCE_1              0x408E
+#define WM831X_POWER_GOOD_SOURCE_2              0x408F
+#define WM831X_CLOCK_CONTROL_1                  0x4090
+#define WM831X_CLOCK_CONTROL_2                  0x4091
+#define WM831X_FLL_CONTROL_1                    0x4092
+#define WM831X_FLL_CONTROL_2                    0x4093
+#define WM831X_FLL_CONTROL_3                    0x4094
+#define WM831X_FLL_CONTROL_4                    0x4095
+#define WM831X_FLL_CONTROL_5                    0x4096
+#define WM831X_UNIQUE_ID_1                      0x7800
+#define WM831X_UNIQUE_ID_2                      0x7801
+#define WM831X_UNIQUE_ID_3                      0x7802
+#define WM831X_UNIQUE_ID_4                      0x7803
+#define WM831X_UNIQUE_ID_5                      0x7804
+#define WM831X_UNIQUE_ID_6                      0x7805
+#define WM831X_UNIQUE_ID_7                      0x7806
+#define WM831X_UNIQUE_ID_8                      0x7807
+#define WM831X_FACTORY_OTP_ID                   0x7808
+#define WM831X_FACTORY_OTP_1                    0x7809
+#define WM831X_FACTORY_OTP_2                    0x780A
+#define WM831X_FACTORY_OTP_3                    0x780B
+#define WM831X_FACTORY_OTP_4                    0x780C
+#define WM831X_FACTORY_OTP_5                    0x780D
+#define WM831X_CUSTOMER_OTP_ID                  0x7810
+#define WM831X_DC1_OTP_CONTROL                  0x7811
+#define WM831X_DC2_OTP_CONTROL                  0x7812
+#define WM831X_DC3_OTP_CONTROL                  0x7813
+#define WM831X_LDO1_2_OTP_CONTROL               0x7814
+#define WM831X_LDO3_4_OTP_CONTROL               0x7815
+#define WM831X_LDO5_6_OTP_CONTROL               0x7816
+#define WM831X_LDO7_8_OTP_CONTROL               0x7817
+#define WM831X_LDO9_10_OTP_CONTROL              0x7818
+#define WM831X_LDO11_EPE_CONTROL                0x7819
+#define WM831X_GPIO1_OTP_CONTROL                0x781A
+#define WM831X_GPIO2_OTP_CONTROL                0x781B
+#define WM831X_GPIO3_OTP_CONTROL                0x781C
+#define WM831X_GPIO4_OTP_CONTROL                0x781D
+#define WM831X_GPIO5_OTP_CONTROL                0x781E
+#define WM831X_GPIO6_OTP_CONTROL                0x781F
+#define WM831X_DBE_CHECK_DATA                   0x7827
+
+/*
+ * R0 (0x00) - Reset ID
+ */
+#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
+
+/*
+ * R1 (0x01) - Revision
+ */
+#define WM831X_PARENT_REV_MASK                  0xFF00  /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_SHIFT                      8  /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_WIDTH                      8  /* PARENT_REV - [15:8] */
+#define WM831X_CHILD_REV_MASK                   0x00FF  /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_SHIFT                       0  /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_WIDTH                       8  /* CHILD_REV - [7:0] */
+
+/*
+ * R16384 (0x4000) - Parent ID
+ */
+#define WM831X_PARENT_ID_MASK                   0xFFFF  /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_SHIFT                       0  /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_WIDTH                      16  /* PARENT_ID - [15:0] */
+
+/*
+ * R16389 (0x4005) - ON Pin Control
+ */
+#define WM831X_ON_PIN_SECACT_MASK               0x0300  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_SHIFT                   8  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_WIDTH                   2  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_PRIMACT_MASK              0x0030  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_SHIFT                  4  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_WIDTH                  2  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_STS                       0x0008  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_MASK                  0x0008  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_SHIFT                      3  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_WIDTH                      1  /* ON_PIN_STS */
+#define WM831X_ON_PIN_TO_MASK                   0x0003  /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_SHIFT                       0  /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_WIDTH                       2  /* ON_PIN_TO - [1:0] */
+
+struct regulator_dev;
+
+struct wm831x {
+	struct mutex io_lock;
+
+	struct device *dev;
+	int (*read_dev)(struct wm831x *wm831x, unsigned short reg,
+			int bytes, void *dest);
+	int (*write_dev)(struct wm831x *wm831x, unsigned short reg,
+			 int bytes, void *src);
+
+	void *control_data;
+
+	int irq;  /* Our chip IRQ */
+	struct mutex irq_lock;
+	struct workqueue_struct *irq_wq;
+	struct work_struct irq_work;
+	unsigned int irq_base;
+	int irq_masks[5];
+
+	struct mutex auxadc_lock;
+
+	/* The WM831x has a security key blocking access to certain
+	 * registers.  The mutex is taken by the accessors for locking
+	 * and unlocking the security key, locked is used to fail
+	 * writes if the lock is held.
+	 */
+	struct mutex key_lock;
+	unsigned int locked:1;
+};
+
+/* Device I/O API */
+int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg);
+int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
+		 unsigned short val);
+void wm831x_reg_lock(struct wm831x *wm831x);
+int wm831x_reg_unlock(struct wm831x *wm831x);
+int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
+		    unsigned short mask, unsigned short val);
+int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
+		     int count, u16 *buf);
+
+int wm831x_irq_init(struct wm831x *wm831x, int irq);
+void wm831x_irq_exit(struct wm831x *wm831x);
+
+int __must_check wm831x_request_irq(struct wm831x *wm831x,
+				    unsigned int irq, irq_handler_t handler,
+				    unsigned long flags, const char *name,
+				    void *dev);
+void wm831x_free_irq(struct wm831x *wm831x, unsigned int, void *);
+void wm831x_disable_irq(struct wm831x *wm831x, int irq);
+void wm831x_enable_irq(struct wm831x *wm831x, int irq);
+
+#endif
diff --git a/include/linux/mfd/wm831x/gpio.h b/include/linux/mfd/wm831x/gpio.h
new file mode 100644
index 000000000000..2835614af0e3
--- /dev/null
+++ b/include/linux/mfd/wm831x/gpio.h
@@ -0,0 +1,55 @@
+/*
+ * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_GPIO_H__
+#define __MFD_WM831X_GPIO_H__
+
+/*
+ * R16440-16455 (0x4038-0x4047) - GPIOx Control
+ */
+#define WM831X_GPN_DIR                          0x8000  /* GPN_DIR */
+#define WM831X_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
+#define WM831X_GPN_DIR_SHIFT                        15  /* GPN_DIR */
+#define WM831X_GPN_DIR_WIDTH                         1  /* GPN_DIR */
+#define WM831X_GPN_PULL_MASK                    0x6000  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_SHIFT                       13  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_WIDTH                        2  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_INT_MODE                     0x1000  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_MASK                0x1000  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_SHIFT                   12  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_WIDTH                    1  /* GPN_INT_MODE */
+#define WM831X_GPN_PWR_DOM                      0x0800  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_MASK                 0x0800  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_SHIFT                    11  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_WIDTH                     1  /* GPN_PWR_DOM */
+#define WM831X_GPN_POL                          0x0400  /* GPN_POL */
+#define WM831X_GPN_POL_MASK                     0x0400  /* GPN_POL */
+#define WM831X_GPN_POL_SHIFT                        10  /* GPN_POL */
+#define WM831X_GPN_POL_WIDTH                         1  /* GPN_POL */
+#define WM831X_GPN_OD                           0x0200  /* GPN_OD */
+#define WM831X_GPN_OD_MASK                      0x0200  /* GPN_OD */
+#define WM831X_GPN_OD_SHIFT                          9  /* GPN_OD */
+#define WM831X_GPN_OD_WIDTH                          1  /* GPN_OD */
+#define WM831X_GPN_TRI                          0x0080  /* GPN_TRI */
+#define WM831X_GPN_TRI_MASK                     0x0080  /* GPN_TRI */
+#define WM831X_GPN_TRI_SHIFT                         7  /* GPN_TRI */
+#define WM831X_GPN_TRI_WIDTH                         1  /* GPN_TRI */
+#define WM831X_GPN_FN_MASK                      0x000F  /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_SHIFT                          0  /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_WIDTH                          4  /* GPN_FN - [3:0] */
+
+#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_UP   (2 << WM831X_GPN_PULL_SHIFT)
+#endif
diff --git a/include/linux/mfd/wm831x/irq.h b/include/linux/mfd/wm831x/irq.h
new file mode 100644
index 000000000000..3a8c97656fda
--- /dev/null
+++ b/include/linux/mfd/wm831x/irq.h
@@ -0,0 +1,764 @@
+/*
+ * include/linux/mfd/wm831x/irq.h -- Interrupt controller for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_IRQ_H__
+#define __MFD_WM831X_IRQ_H__
+
+/* Interrupt number assignments within Linux */
+#define WM831X_IRQ_TEMP_THW 0
+#define WM831X_IRQ_GPIO_1   1
+#define WM831X_IRQ_GPIO_2   2
+#define WM831X_IRQ_GPIO_3   3
+#define WM831X_IRQ_GPIO_4   4
+#define WM831X_IRQ_GPIO_5   5
+#define WM831X_IRQ_GPIO_6   6
+#define WM831X_IRQ_GPIO_7   7
+#define WM831X_IRQ_GPIO_8   8
+#define WM831X_IRQ_GPIO_9   9
+#define WM831X_IRQ_GPIO_10  10
+#define WM831X_IRQ_GPIO_11  11
+#define WM831X_IRQ_GPIO_12  12
+#define WM831X_IRQ_GPIO_13  13
+#define WM831X_IRQ_GPIO_14  14
+#define WM831X_IRQ_GPIO_15  15
+#define WM831X_IRQ_GPIO_16  16
+#define WM831X_IRQ_ON           17
+#define WM831X_IRQ_PPM_SYSLO    18
+#define WM831X_IRQ_PPM_PWR_SRC  19
+#define WM831X_IRQ_PPM_USB_CURR 20
+#define WM831X_IRQ_WDOG_TO      21
+#define WM831X_IRQ_RTC_PER      22
+#define WM831X_IRQ_RTC_ALM      23
+#define WM831X_IRQ_CHG_BATT_HOT  24
+#define WM831X_IRQ_CHG_BATT_COLD 25
+#define WM831X_IRQ_CHG_BATT_FAIL 26
+#define WM831X_IRQ_CHG_OV        27
+#define WM831X_IRQ_CHG_END       29
+#define WM831X_IRQ_CHG_TO        30
+#define WM831X_IRQ_CHG_MODE      31
+#define WM831X_IRQ_CHG_START     32
+#define WM831X_IRQ_TCHDATA       33
+#define WM831X_IRQ_TCHPD         34
+#define WM831X_IRQ_AUXADC_DATA   35
+#define WM831X_IRQ_AUXADC_DCOMP1 36
+#define WM831X_IRQ_AUXADC_DCOMP2 37
+#define WM831X_IRQ_AUXADC_DCOMP3 38
+#define WM831X_IRQ_AUXADC_DCOMP4 39
+#define WM831X_IRQ_CS1           40
+#define WM831X_IRQ_CS2           41
+#define WM831X_IRQ_HC_DC1        42
+#define WM831X_IRQ_HC_DC2        43
+#define WM831X_IRQ_UV_LDO1       44
+#define WM831X_IRQ_UV_LDO2       45
+#define WM831X_IRQ_UV_LDO3       46
+#define WM831X_IRQ_UV_LDO4       47
+#define WM831X_IRQ_UV_LDO5       48
+#define WM831X_IRQ_UV_LDO6       49
+#define WM831X_IRQ_UV_LDO7       50
+#define WM831X_IRQ_UV_LDO8       51
+#define WM831X_IRQ_UV_LDO9       52
+#define WM831X_IRQ_UV_LDO10      53
+#define WM831X_IRQ_UV_DC1        54
+#define WM831X_IRQ_UV_DC2        55
+#define WM831X_IRQ_UV_DC3        56
+#define WM831X_IRQ_UV_DC4        57
+
+#define WM831X_NUM_IRQS     58
+
+/*
+ * R16400 (0x4010) - System Interrupts
+ */
+#define WM831X_PS_INT                           0x8000  /* PS_INT */
+#define WM831X_PS_INT_MASK                      0x8000  /* PS_INT */
+#define WM831X_PS_INT_SHIFT                         15  /* PS_INT */
+#define WM831X_PS_INT_WIDTH                          1  /* PS_INT */
+#define WM831X_TEMP_INT                         0x4000  /* TEMP_INT */
+#define WM831X_TEMP_INT_MASK                    0x4000  /* TEMP_INT */
+#define WM831X_TEMP_INT_SHIFT                       14  /* TEMP_INT */
+#define WM831X_TEMP_INT_WIDTH                        1  /* TEMP_INT */
+#define WM831X_GP_INT                           0x2000  /* GP_INT */
+#define WM831X_GP_INT_MASK                      0x2000  /* GP_INT */
+#define WM831X_GP_INT_SHIFT                         13  /* GP_INT */
+#define WM831X_GP_INT_WIDTH                          1  /* GP_INT */
+#define WM831X_ON_PIN_INT                       0x1000  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_MASK                  0x1000  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_SHIFT                     12  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_WIDTH                      1  /* ON_PIN_INT */
+#define WM831X_WDOG_INT                         0x0800  /* WDOG_INT */
+#define WM831X_WDOG_INT_MASK                    0x0800  /* WDOG_INT */
+#define WM831X_WDOG_INT_SHIFT                       11  /* WDOG_INT */
+#define WM831X_WDOG_INT_WIDTH                        1  /* WDOG_INT */
+#define WM831X_TCHDATA_INT                      0x0400  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_MASK                 0x0400  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_SHIFT                    10  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_WIDTH                     1  /* TCHDATA_INT */
+#define WM831X_TCHPD_INT                        0x0200  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_MASK                   0x0200  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_SHIFT                       9  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_WIDTH                       1  /* TCHPD_INT */
+#define WM831X_AUXADC_INT                       0x0100  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_MASK                  0x0100  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_SHIFT                      8  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_WIDTH                      1  /* AUXADC_INT */
+#define WM831X_PPM_INT                          0x0080  /* PPM_INT */
+#define WM831X_PPM_INT_MASK                     0x0080  /* PPM_INT */
+#define WM831X_PPM_INT_SHIFT                         7  /* PPM_INT */
+#define WM831X_PPM_INT_WIDTH                         1  /* PPM_INT */
+#define WM831X_CS_INT                           0x0040  /* CS_INT */
+#define WM831X_CS_INT_MASK                      0x0040  /* CS_INT */
+#define WM831X_CS_INT_SHIFT                          6  /* CS_INT */
+#define WM831X_CS_INT_WIDTH                          1  /* CS_INT */
+#define WM831X_RTC_INT                          0x0020  /* RTC_INT */
+#define WM831X_RTC_INT_MASK                     0x0020  /* RTC_INT */
+#define WM831X_RTC_INT_SHIFT                         5  /* RTC_INT */
+#define WM831X_RTC_INT_WIDTH                         1  /* RTC_INT */
+#define WM831X_OTP_INT                          0x0010  /* OTP_INT */
+#define WM831X_OTP_INT_MASK                     0x0010  /* OTP_INT */
+#define WM831X_OTP_INT_SHIFT                         4  /* OTP_INT */
+#define WM831X_OTP_INT_WIDTH                         1  /* OTP_INT */
+#define WM831X_CHILD_INT                        0x0008  /* CHILD_INT */
+#define WM831X_CHILD_INT_MASK                   0x0008  /* CHILD_INT */
+#define WM831X_CHILD_INT_SHIFT                       3  /* CHILD_INT */
+#define WM831X_CHILD_INT_WIDTH                       1  /* CHILD_INT */
+#define WM831X_CHG_INT                          0x0004  /* CHG_INT */
+#define WM831X_CHG_INT_MASK                     0x0004  /* CHG_INT */
+#define WM831X_CHG_INT_SHIFT                         2  /* CHG_INT */
+#define WM831X_CHG_INT_WIDTH                         1  /* CHG_INT */
+#define WM831X_HC_INT                           0x0002  /* HC_INT */
+#define WM831X_HC_INT_MASK                      0x0002  /* HC_INT */
+#define WM831X_HC_INT_SHIFT                          1  /* HC_INT */
+#define WM831X_HC_INT_WIDTH                          1  /* HC_INT */
+#define WM831X_UV_INT                           0x0001  /* UV_INT */
+#define WM831X_UV_INT_MASK                      0x0001  /* UV_INT */
+#define WM831X_UV_INT_SHIFT                          0  /* UV_INT */
+#define WM831X_UV_INT_WIDTH                          1  /* UV_INT */
+
+/*
+ * R16401 (0x4011) - Interrupt Status 1
+ */
+#define WM831X_PPM_SYSLO_EINT                   0x8000  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_MASK              0x8000  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_SHIFT                 15  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_WIDTH                  1  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_PWR_SRC_EINT                 0x4000  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_MASK            0x4000  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_SHIFT               14  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_WIDTH                1  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_USB_CURR_EINT                0x2000  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_MASK           0x2000  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_SHIFT              13  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_WIDTH               1  /* PPM_USB_CURR_EINT */
+#define WM831X_ON_PIN_EINT                      0x1000  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_MASK                 0x1000  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_SHIFT                    12  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_WIDTH                     1  /* ON_PIN_EINT */
+#define WM831X_WDOG_TO_EINT                     0x0800  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_MASK                0x0800  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_SHIFT                   11  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_WIDTH                    1  /* WDOG_TO_EINT */
+#define WM831X_TCHDATA_EINT                     0x0400  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_MASK                0x0400  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_SHIFT                   10  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_WIDTH                    1  /* TCHDATA_EINT */
+#define WM831X_TCHPD_EINT                       0x0200  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_MASK                  0x0200  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_SHIFT                      9  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_WIDTH                      1  /* TCHPD_EINT */
+#define WM831X_AUXADC_DATA_EINT                 0x0100  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_MASK            0x0100  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_SHIFT                8  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_WIDTH                1  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT               0x0080  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_MASK          0x0080  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_SHIFT              7  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_WIDTH              1  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT               0x0040  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_MASK          0x0040  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_SHIFT              6  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_WIDTH              1  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT               0x0020  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_MASK          0x0020  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_SHIFT              5  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_WIDTH              1  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT               0x0010  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_MASK          0x0010  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_SHIFT              4  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_WIDTH              1  /* AUXADC_DCOMP1_EINT */
+#define WM831X_RTC_PER_EINT                     0x0008  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_MASK                0x0008  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_SHIFT                    3  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_WIDTH                    1  /* RTC_PER_EINT */
+#define WM831X_RTC_ALM_EINT                     0x0004  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_MASK                0x0004  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_SHIFT                    2  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_WIDTH                    1  /* RTC_ALM_EINT */
+#define WM831X_TEMP_THW_EINT                    0x0002  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_MASK               0x0002  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_SHIFT                   1  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_WIDTH                   1  /* TEMP_THW_EINT */
+
+/*
+ * R16402 (0x4012) - Interrupt Status 2
+ */
+#define WM831X_CHG_BATT_HOT_EINT                0x8000  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_MASK           0x8000  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_SHIFT              15  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_WIDTH               1  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_COLD_EINT               0x4000  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_MASK          0x4000  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_SHIFT             14  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_WIDTH              1  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT               0x2000  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_MASK          0x2000  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_SHIFT             13  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_WIDTH              1  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_OV_EINT                      0x1000  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_MASK                 0x1000  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_SHIFT                    12  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_WIDTH                     1  /* CHG_OV_EINT */
+#define WM831X_CHG_END_EINT                     0x0800  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_MASK                0x0800  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_SHIFT                   11  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_WIDTH                    1  /* CHG_END_EINT */
+#define WM831X_CHG_TO_EINT                      0x0400  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_MASK                 0x0400  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_SHIFT                    10  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_WIDTH                     1  /* CHG_TO_EINT */
+#define WM831X_CHG_MODE_EINT                    0x0200  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_MASK               0x0200  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_SHIFT                   9  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_WIDTH                   1  /* CHG_MODE_EINT */
+#define WM831X_CHG_START_EINT                   0x0100  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_MASK              0x0100  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_SHIFT                  8  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_WIDTH                  1  /* CHG_START_EINT */
+#define WM831X_CS2_EINT                         0x0080  /* CS2_EINT */
+#define WM831X_CS2_EINT_MASK                    0x0080  /* CS2_EINT */
+#define WM831X_CS2_EINT_SHIFT                        7  /* CS2_EINT */
+#define WM831X_CS2_EINT_WIDTH                        1  /* CS2_EINT */
+#define WM831X_CS1_EINT                         0x0040  /* CS1_EINT */
+#define WM831X_CS1_EINT_MASK                    0x0040  /* CS1_EINT */
+#define WM831X_CS1_EINT_SHIFT                        6  /* CS1_EINT */
+#define WM831X_CS1_EINT_WIDTH                        1  /* CS1_EINT */
+#define WM831X_OTP_CMD_END_EINT                 0x0020  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_MASK            0x0020  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_SHIFT                5  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_WIDTH                1  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_ERR_EINT                     0x0010  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_MASK                0x0010  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_SHIFT                    4  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_WIDTH                    1  /* OTP_ERR_EINT */
+#define WM831X_PS_POR_EINT                      0x0004  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_MASK                 0x0004  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_SHIFT                     2  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_WIDTH                     1  /* PS_POR_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT                0x0002  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_MASK           0x0002  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_SHIFT               1  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_WIDTH               1  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_ON_WAKE_EINT                  0x0001  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_MASK             0x0001  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_SHIFT                 0  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_WIDTH                 1  /* PS_ON_WAKE_EINT */
+
+/*
+ * R16403 (0x4013) - Interrupt Status 3
+ */
+#define WM831X_UV_LDO10_EINT                    0x0200  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_MASK               0x0200  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_SHIFT                   9  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_WIDTH                   1  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO9_EINT                     0x0100  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_MASK                0x0100  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_SHIFT                    8  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_WIDTH                    1  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO8_EINT                     0x0080  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_MASK                0x0080  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_SHIFT                    7  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_WIDTH                    1  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO7_EINT                     0x0040  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_MASK                0x0040  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_SHIFT                    6  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_WIDTH                    1  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO6_EINT                     0x0020  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_MASK                0x0020  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_SHIFT                    5  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_WIDTH                    1  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO5_EINT                     0x0010  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_MASK                0x0010  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_SHIFT                    4  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_WIDTH                    1  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO4_EINT                     0x0008  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_MASK                0x0008  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_SHIFT                    3  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_WIDTH                    1  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO3_EINT                     0x0004  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_MASK                0x0004  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_SHIFT                    2  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_WIDTH                    1  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO2_EINT                     0x0002  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_MASK                0x0002  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_SHIFT                    1  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_WIDTH                    1  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO1_EINT                     0x0001  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_MASK                0x0001  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_SHIFT                    0  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_WIDTH                    1  /* UV_LDO1_EINT */
+
+/*
+ * R16404 (0x4014) - Interrupt Status 4
+ */
+#define WM831X_HC_DC2_EINT                      0x0200  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_MASK                 0x0200  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_SHIFT                     9  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_WIDTH                     1  /* HC_DC2_EINT */
+#define WM831X_HC_DC1_EINT                      0x0100  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_MASK                 0x0100  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_SHIFT                     8  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_WIDTH                     1  /* HC_DC1_EINT */
+#define WM831X_UV_DC4_EINT                      0x0008  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_MASK                 0x0008  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_SHIFT                     3  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_WIDTH                     1  /* UV_DC4_EINT */
+#define WM831X_UV_DC3_EINT                      0x0004  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_MASK                 0x0004  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_SHIFT                     2  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_WIDTH                     1  /* UV_DC3_EINT */
+#define WM831X_UV_DC2_EINT                      0x0002  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_MASK                 0x0002  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_SHIFT                     1  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_WIDTH                     1  /* UV_DC2_EINT */
+#define WM831X_UV_DC1_EINT                      0x0001  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_MASK                 0x0001  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_SHIFT                     0  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_WIDTH                     1  /* UV_DC1_EINT */
+
+/*
+ * R16405 (0x4015) - Interrupt Status 5
+ */
+#define WM831X_GP16_EINT                        0x8000  /* GP16_EINT */
+#define WM831X_GP16_EINT_MASK                   0x8000  /* GP16_EINT */
+#define WM831X_GP16_EINT_SHIFT                      15  /* GP16_EINT */
+#define WM831X_GP16_EINT_WIDTH                       1  /* GP16_EINT */
+#define WM831X_GP15_EINT                        0x4000  /* GP15_EINT */
+#define WM831X_GP15_EINT_MASK                   0x4000  /* GP15_EINT */
+#define WM831X_GP15_EINT_SHIFT                      14  /* GP15_EINT */
+#define WM831X_GP15_EINT_WIDTH                       1  /* GP15_EINT */
+#define WM831X_GP14_EINT                        0x2000  /* GP14_EINT */
+#define WM831X_GP14_EINT_MASK                   0x2000  /* GP14_EINT */
+#define WM831X_GP14_EINT_SHIFT                      13  /* GP14_EINT */
+#define WM831X_GP14_EINT_WIDTH                       1  /* GP14_EINT */
+#define WM831X_GP13_EINT                        0x1000  /* GP13_EINT */
+#define WM831X_GP13_EINT_MASK                   0x1000  /* GP13_EINT */
+#define WM831X_GP13_EINT_SHIFT                      12  /* GP13_EINT */
+#define WM831X_GP13_EINT_WIDTH                       1  /* GP13_EINT */
+#define WM831X_GP12_EINT                        0x0800  /* GP12_EINT */
+#define WM831X_GP12_EINT_MASK                   0x0800  /* GP12_EINT */
+#define WM831X_GP12_EINT_SHIFT                      11  /* GP12_EINT */
+#define WM831X_GP12_EINT_WIDTH                       1  /* GP12_EINT */
+#define WM831X_GP11_EINT                        0x0400  /* GP11_EINT */
+#define WM831X_GP11_EINT_MASK                   0x0400  /* GP11_EINT */
+#define WM831X_GP11_EINT_SHIFT                      10  /* GP11_EINT */
+#define WM831X_GP11_EINT_WIDTH                       1  /* GP11_EINT */
+#define WM831X_GP10_EINT                        0x0200  /* GP10_EINT */
+#define WM831X_GP10_EINT_MASK                   0x0200  /* GP10_EINT */
+#define WM831X_GP10_EINT_SHIFT                       9  /* GP10_EINT */
+#define WM831X_GP10_EINT_WIDTH                       1  /* GP10_EINT */
+#define WM831X_GP9_EINT                         0x0100  /* GP9_EINT */
+#define WM831X_GP9_EINT_MASK                    0x0100  /* GP9_EINT */
+#define WM831X_GP9_EINT_SHIFT                        8  /* GP9_EINT */
+#define WM831X_GP9_EINT_WIDTH                        1  /* GP9_EINT */
+#define WM831X_GP8_EINT                         0x0080  /* GP8_EINT */
+#define WM831X_GP8_EINT_MASK                    0x0080  /* GP8_EINT */
+#define WM831X_GP8_EINT_SHIFT                        7  /* GP8_EINT */
+#define WM831X_GP8_EINT_WIDTH                        1  /* GP8_EINT */
+#define WM831X_GP7_EINT                         0x0040  /* GP7_EINT */
+#define WM831X_GP7_EINT_MASK                    0x0040  /* GP7_EINT */
+#define WM831X_GP7_EINT_SHIFT                        6  /* GP7_EINT */
+#define WM831X_GP7_EINT_WIDTH                        1  /* GP7_EINT */
+#define WM831X_GP6_EINT                         0x0020  /* GP6_EINT */
+#define WM831X_GP6_EINT_MASK                    0x0020  /* GP6_EINT */
+#define WM831X_GP6_EINT_SHIFT                        5  /* GP6_EINT */
+#define WM831X_GP6_EINT_WIDTH                        1  /* GP6_EINT */
+#define WM831X_GP5_EINT                         0x0010  /* GP5_EINT */
+#define WM831X_GP5_EINT_MASK                    0x0010  /* GP5_EINT */
+#define WM831X_GP5_EINT_SHIFT                        4  /* GP5_EINT */
+#define WM831X_GP5_EINT_WIDTH                        1  /* GP5_EINT */
+#define WM831X_GP4_EINT                         0x0008  /* GP4_EINT */
+#define WM831X_GP4_EINT_MASK                    0x0008  /* GP4_EINT */
+#define WM831X_GP4_EINT_SHIFT                        3  /* GP4_EINT */
+#define WM831X_GP4_EINT_WIDTH                        1  /* GP4_EINT */
+#define WM831X_GP3_EINT                         0x0004  /* GP3_EINT */
+#define WM831X_GP3_EINT_MASK                    0x0004  /* GP3_EINT */
+#define WM831X_GP3_EINT_SHIFT                        2  /* GP3_EINT */
+#define WM831X_GP3_EINT_WIDTH                        1  /* GP3_EINT */
+#define WM831X_GP2_EINT                         0x0002  /* GP2_EINT */
+#define WM831X_GP2_EINT_MASK                    0x0002  /* GP2_EINT */
+#define WM831X_GP2_EINT_SHIFT                        1  /* GP2_EINT */
+#define WM831X_GP2_EINT_WIDTH                        1  /* GP2_EINT */
+#define WM831X_GP1_EINT                         0x0001  /* GP1_EINT */
+#define WM831X_GP1_EINT_MASK                    0x0001  /* GP1_EINT */
+#define WM831X_GP1_EINT_SHIFT                        0  /* GP1_EINT */
+#define WM831X_GP1_EINT_WIDTH                        1  /* GP1_EINT */
+
+/*
+ * R16407 (0x4017) - IRQ Config
+ */
+#define WM831X_IRQ_OD                           0x0002  /* IRQ_OD */
+#define WM831X_IRQ_OD_MASK                      0x0002  /* IRQ_OD */
+#define WM831X_IRQ_OD_SHIFT                          1  /* IRQ_OD */
+#define WM831X_IRQ_OD_WIDTH                          1  /* IRQ_OD */
+#define WM831X_IM_IRQ                           0x0001  /* IM_IRQ */
+#define WM831X_IM_IRQ_MASK                      0x0001  /* IM_IRQ */
+#define WM831X_IM_IRQ_SHIFT                          0  /* IM_IRQ */
+#define WM831X_IM_IRQ_WIDTH                          1  /* IM_IRQ */
+
+/*
+ * R16408 (0x4018) - System Interrupts Mask
+ */
+#define WM831X_IM_PS_INT                        0x8000  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_MASK                   0x8000  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_SHIFT                      15  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_WIDTH                       1  /* IM_PS_INT */
+#define WM831X_IM_TEMP_INT                      0x4000  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_MASK                 0x4000  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_SHIFT                    14  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_WIDTH                     1  /* IM_TEMP_INT */
+#define WM831X_IM_GP_INT                        0x2000  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_MASK                   0x2000  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_SHIFT                      13  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_WIDTH                       1  /* IM_GP_INT */
+#define WM831X_IM_ON_PIN_INT                    0x1000  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_MASK               0x1000  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_SHIFT                  12  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_WIDTH                   1  /* IM_ON_PIN_INT */
+#define WM831X_IM_WDOG_INT                      0x0800  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_MASK                 0x0800  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_SHIFT                    11  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_WIDTH                     1  /* IM_WDOG_INT */
+#define WM831X_IM_TCHDATA_INT                   0x0400  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_MASK              0x0400  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_SHIFT                 10  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_WIDTH                  1  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHPD_INT                     0x0200  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_MASK                0x0200  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_SHIFT                    9  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_WIDTH                    1  /* IM_TCHPD_INT */
+#define WM831X_IM_AUXADC_INT                    0x0100  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_MASK               0x0100  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_SHIFT                   8  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_WIDTH                   1  /* IM_AUXADC_INT */
+#define WM831X_IM_PPM_INT                       0x0080  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_MASK                  0x0080  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_SHIFT                      7  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_WIDTH                      1  /* IM_PPM_INT */
+#define WM831X_IM_CS_INT                        0x0040  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_MASK                   0x0040  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_SHIFT                       6  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_WIDTH                       1  /* IM_CS_INT */
+#define WM831X_IM_RTC_INT                       0x0020  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_MASK                  0x0020  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_SHIFT                      5  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_WIDTH                      1  /* IM_RTC_INT */
+#define WM831X_IM_OTP_INT                       0x0010  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_MASK                  0x0010  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_SHIFT                      4  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_WIDTH                      1  /* IM_OTP_INT */
+#define WM831X_IM_CHILD_INT                     0x0008  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_MASK                0x0008  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_SHIFT                    3  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_WIDTH                    1  /* IM_CHILD_INT */
+#define WM831X_IM_CHG_INT                       0x0004  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_MASK                  0x0004  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_SHIFT                      2  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_WIDTH                      1  /* IM_CHG_INT */
+#define WM831X_IM_HC_INT                        0x0002  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_MASK                   0x0002  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_SHIFT                       1  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_WIDTH                       1  /* IM_HC_INT */
+#define WM831X_IM_UV_INT                        0x0001  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_MASK                   0x0001  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_SHIFT                       0  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_WIDTH                       1  /* IM_UV_INT */
+
+/*
+ * R16409 (0x4019) - Interrupt Status 1 Mask
+ */
+#define WM831X_IM_PPM_SYSLO_EINT                0x8000  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_MASK           0x8000  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_SHIFT              15  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_WIDTH               1  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT              0x4000  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_MASK         0x4000  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_SHIFT            14  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_WIDTH             1  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT             0x2000  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_MASK        0x2000  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_SHIFT           13  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_WIDTH            1  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_ON_PIN_EINT                   0x1000  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_MASK              0x1000  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_SHIFT                 12  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_WIDTH                  1  /* IM_ON_PIN_EINT */
+#define WM831X_IM_WDOG_TO_EINT                  0x0800  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_MASK             0x0800  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_SHIFT                11  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_WIDTH                 1  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_TCHDATA_EINT                  0x0400  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_MASK             0x0400  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_SHIFT                10  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_WIDTH                 1  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHPD_EINT                    0x0200  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_MASK               0x0200  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_SHIFT                   9  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_WIDTH                   1  /* IM_TCHPD_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT              0x0100  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_MASK         0x0100  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_SHIFT             8  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_WIDTH             1  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT            0x0080  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_MASK       0x0080  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_SHIFT           7  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_WIDTH           1  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT            0x0040  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_MASK       0x0040  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_SHIFT           6  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_WIDTH           1  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT            0x0020  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_MASK       0x0020  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_SHIFT           5  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_WIDTH           1  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT            0x0010  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_MASK       0x0010  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_SHIFT           4  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_WIDTH           1  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_RTC_PER_EINT                  0x0008  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_MASK             0x0008  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_SHIFT                 3  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_WIDTH                 1  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_ALM_EINT                  0x0004  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_MASK             0x0004  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_SHIFT                 2  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_WIDTH                 1  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_TEMP_THW_EINT                 0x0002  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_MASK            0x0002  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_SHIFT                1  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_WIDTH                1  /* IM_TEMP_THW_EINT */
+
+/*
+ * R16410 (0x401A) - Interrupt Status 2 Mask
+ */
+#define WM831X_IM_CHG_BATT_HOT_EINT             0x8000  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_MASK        0x8000  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_SHIFT           15  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_WIDTH            1  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT            0x4000  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_MASK       0x4000  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_SHIFT          14  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_WIDTH           1  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT            0x2000  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_MASK       0x2000  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_SHIFT          13  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_WIDTH           1  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_OV_EINT                   0x1000  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_MASK              0x1000  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_SHIFT                 12  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_WIDTH                  1  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_END_EINT                  0x0800  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_MASK             0x0800  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_SHIFT                11  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_WIDTH                 1  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_TO_EINT                   0x0400  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_MASK              0x0400  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_SHIFT                 10  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_WIDTH                  1  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_MODE_EINT                 0x0200  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_MASK            0x0200  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_SHIFT                9  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_WIDTH                1  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_START_EINT                0x0100  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_MASK           0x0100  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_SHIFT               8  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_WIDTH               1  /* IM_CHG_START_EINT */
+#define WM831X_IM_CS2_EINT                      0x0080  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_MASK                 0x0080  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_SHIFT                     7  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_WIDTH                     1  /* IM_CS2_EINT */
+#define WM831X_IM_CS1_EINT                      0x0040  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_MASK                 0x0040  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_SHIFT                     6  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_WIDTH                     1  /* IM_CS1_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT              0x0020  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_MASK         0x0020  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_SHIFT             5  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_WIDTH             1  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_ERR_EINT                  0x0010  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_MASK             0x0010  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_SHIFT                 4  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_WIDTH                 1  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_PS_POR_EINT                   0x0004  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_MASK              0x0004  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_SHIFT                  2  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_WIDTH                  1  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT             0x0002  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_MASK        0x0002  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_SHIFT            1  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_WIDTH            1  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT               0x0001  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_MASK          0x0001  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_SHIFT              0  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_WIDTH              1  /* IM_PS_ON_WAKE_EINT */
+
+/*
+ * R16411 (0x401B) - Interrupt Status 3 Mask
+ */
+#define WM831X_IM_UV_LDO10_EINT                 0x0200  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_MASK            0x0200  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_SHIFT                9  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_WIDTH                1  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO9_EINT                  0x0100  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_MASK             0x0100  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_SHIFT                 8  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_WIDTH                 1  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO8_EINT                  0x0080  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_MASK             0x0080  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_SHIFT                 7  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_WIDTH                 1  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO7_EINT                  0x0040  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_MASK             0x0040  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_SHIFT                 6  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_WIDTH                 1  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO6_EINT                  0x0020  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_MASK             0x0020  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_SHIFT                 5  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_WIDTH                 1  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO5_EINT                  0x0010  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_MASK             0x0010  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_SHIFT                 4  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_WIDTH                 1  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO4_EINT                  0x0008  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_MASK             0x0008  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_SHIFT                 3  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_WIDTH                 1  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO3_EINT                  0x0004  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_MASK             0x0004  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_SHIFT                 2  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_WIDTH                 1  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO2_EINT                  0x0002  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_MASK             0x0002  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_SHIFT                 1  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_WIDTH                 1  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO1_EINT                  0x0001  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_MASK             0x0001  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_SHIFT                 0  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_WIDTH                 1  /* IM_UV_LDO1_EINT */
+
+/*
+ * R16412 (0x401C) - Interrupt Status 4 Mask
+ */
+#define WM831X_IM_HC_DC2_EINT                   0x0200  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_MASK              0x0200  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_SHIFT                  9  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_WIDTH                  1  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC1_EINT                   0x0100  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_MASK              0x0100  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_SHIFT                  8  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_WIDTH                  1  /* IM_HC_DC1_EINT */
+#define WM831X_IM_UV_DC4_EINT                   0x0008  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_MASK              0x0008  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_SHIFT                  3  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_WIDTH                  1  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC3_EINT                   0x0004  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_MASK              0x0004  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_SHIFT                  2  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_WIDTH                  1  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC2_EINT                   0x0002  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_MASK              0x0002  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_SHIFT                  1  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_WIDTH                  1  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC1_EINT                   0x0001  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_MASK              0x0001  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_SHIFT                  0  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_WIDTH                  1  /* IM_UV_DC1_EINT */
+
+/*
+ * R16413 (0x401D) - Interrupt Status 5 Mask
+ */
+#define WM831X_IM_GP16_EINT                     0x8000  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_MASK                0x8000  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_SHIFT                   15  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_WIDTH                    1  /* IM_GP16_EINT */
+#define WM831X_IM_GP15_EINT                     0x4000  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_MASK                0x4000  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_SHIFT                   14  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_WIDTH                    1  /* IM_GP15_EINT */
+#define WM831X_IM_GP14_EINT                     0x2000  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_MASK                0x2000  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_SHIFT                   13  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_WIDTH                    1  /* IM_GP14_EINT */
+#define WM831X_IM_GP13_EINT                     0x1000  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_MASK                0x1000  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_SHIFT                   12  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_WIDTH                    1  /* IM_GP13_EINT */
+#define WM831X_IM_GP12_EINT                     0x0800  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_MASK                0x0800  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_SHIFT                   11  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_WIDTH                    1  /* IM_GP12_EINT */
+#define WM831X_IM_GP11_EINT                     0x0400  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_MASK                0x0400  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_SHIFT                   10  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_WIDTH                    1  /* IM_GP11_EINT */
+#define WM831X_IM_GP10_EINT                     0x0200  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_MASK                0x0200  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_SHIFT                    9  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_WIDTH                    1  /* IM_GP10_EINT */
+#define WM831X_IM_GP9_EINT                      0x0100  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_MASK                 0x0100  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_SHIFT                     8  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_WIDTH                     1  /* IM_GP9_EINT */
+#define WM831X_IM_GP8_EINT                      0x0080  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_MASK                 0x0080  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_SHIFT                     7  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_WIDTH                     1  /* IM_GP8_EINT */
+#define WM831X_IM_GP7_EINT                      0x0040  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_MASK                 0x0040  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_SHIFT                     6  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_WIDTH                     1  /* IM_GP7_EINT */
+#define WM831X_IM_GP6_EINT                      0x0020  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_MASK                 0x0020  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_SHIFT                     5  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_WIDTH                     1  /* IM_GP6_EINT */
+#define WM831X_IM_GP5_EINT                      0x0010  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_MASK                 0x0010  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_SHIFT                     4  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_WIDTH                     1  /* IM_GP5_EINT */
+#define WM831X_IM_GP4_EINT                      0x0008  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_MASK                 0x0008  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_SHIFT                     3  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_WIDTH                     1  /* IM_GP4_EINT */
+#define WM831X_IM_GP3_EINT                      0x0004  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_MASK                 0x0004  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_SHIFT                     2  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_WIDTH                     1  /* IM_GP3_EINT */
+#define WM831X_IM_GP2_EINT                      0x0002  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_MASK                 0x0002  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_SHIFT                     1  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_WIDTH                     1  /* IM_GP2_EINT */
+#define WM831X_IM_GP1_EINT                      0x0001  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_MASK                 0x0001  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_SHIFT                     0  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_WIDTH                     1  /* IM_GP1_EINT */
+
+
+#endif
diff --git a/include/linux/mfd/wm831x/otp.h b/include/linux/mfd/wm831x/otp.h
new file mode 100644
index 000000000000..ce1f81a39bfc
--- /dev/null
+++ b/include/linux/mfd/wm831x/otp.h
@@ -0,0 +1,162 @@
+/*
+ * include/linux/mfd/wm831x/otp.h -- OTP interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_OTP_H__
+#define __MFD_WM831X_OTP_H__
+
+int wm831x_otp_init(struct wm831x *wm831x);
+void wm831x_otp_exit(struct wm831x *wm831x);
+
+/*
+ * R30720 (0x7800) - Unique ID 1
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30721 (0x7801) - Unique ID 2
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30722 (0x7802) - Unique ID 3
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30723 (0x7803) - Unique ID 4
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30724 (0x7804) - Unique ID 5
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30725 (0x7805) - Unique ID 6
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30726 (0x7806) - Unique ID 7
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30727 (0x7807) - Unique ID 8
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30728 (0x7808) - Factory OTP ID
+ */
+#define WM831X_OTP_FACT_ID_MASK                 0xFFFE  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_SHIFT                     1  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_WIDTH                    15  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_FINAL                   0x0001  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_MASK              0x0001  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_SHIFT                  0  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_WIDTH                  1  /* OTP_FACT_FINAL */
+
+/*
+ * R30729 (0x7809) - Factory OTP 1
+ */
+#define WM831X_DC3_TRIM_MASK                    0xF000  /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_SHIFT                       12  /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_WIDTH                        4  /* DC3_TRIM - [15:12] */
+#define WM831X_DC2_TRIM_MASK                    0x0FC0  /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_SHIFT                        6  /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_WIDTH                        6  /* DC2_TRIM - [11:6] */
+#define WM831X_DC1_TRIM_MASK                    0x003F  /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_SHIFT                        0  /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_WIDTH                        6  /* DC1_TRIM - [5:0] */
+
+/*
+ * R30730 (0x780A) - Factory OTP 2
+ */
+#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
+
+/*
+ * R30731 (0x780B) - Factory OTP 3
+ */
+#define WM831X_OSC_TRIM_MASK                    0x0780  /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_SHIFT                        7  /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_WIDTH                        4  /* OSC_TRIM - [10:7] */
+#define WM831X_BG_TRIM_MASK                     0x0078  /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_SHIFT                         3  /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_WIDTH                         4  /* BG_TRIM - [6:3] */
+#define WM831X_LPBG_TRIM_MASK                   0x0007  /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_SHIFT                       0  /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_WIDTH                       3  /* LPBG_TRIM - [2:0] */
+
+/*
+ * R30732 (0x780C) - Factory OTP 4
+ */
+#define WM831X_CHILD_I2C_ADDR_MASK              0x00FE  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_SHIFT                  1  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_WIDTH                  7  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CH_AW                            0x0001  /* CH_AW */
+#define WM831X_CH_AW_MASK                       0x0001  /* CH_AW */
+#define WM831X_CH_AW_SHIFT                           0  /* CH_AW */
+#define WM831X_CH_AW_WIDTH                           1  /* CH_AW */
+
+/*
+ * R30733 (0x780D) - Factory OTP 5
+ */
+#define WM831X_CHARGE_TRIM_MASK                 0x003F  /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_SHIFT                     0  /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_WIDTH                     6  /* CHARGE_TRIM - [5:0] */
+
+/*
+ * R30736 (0x7810) - Customer OTP ID
+ */
+#define WM831X_OTP_AUTO_PROG                    0x8000  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_MASK               0x8000  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_SHIFT                  15  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_WIDTH                   1  /* OTP_AUTO_PROG */
+#define WM831X_OTP_CUST_ID_MASK                 0x7FFE  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_SHIFT                     1  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_WIDTH                    14  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_FINAL                   0x0001  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_MASK              0x0001  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_SHIFT                  0  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_WIDTH                  1  /* OTP_CUST_FINAL */
+
+/*
+ * R30759 (0x7827) - DBE CHECK DATA
+ */
+#define WM831X_DBE_VALID_DATA_MASK              0xFFFF  /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_SHIFT                  0  /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_WIDTH                 16  /* DBE_VALID_DATA - [15:0] */
+
+
+#endif
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
new file mode 100644
index 000000000000..90d820260aad
--- /dev/null
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -0,0 +1,113 @@
+/*
+ * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PDATA_H__
+#define __MFD_WM831X_PDATA_H__
+
+struct wm831x;
+struct regulator_init_data;
+
+struct wm831x_backlight_pdata {
+	int isink;     /** ISINK to use, 1 or 2 */
+	int max_uA;    /** Maximum current to allow */
+};
+
+struct wm831x_backup_pdata {
+	int charger_enable;
+	int no_constant_voltage;  /** Disable constant voltage charging */
+	int vlim;   /** Voltage limit in milivolts */
+	int ilim;   /** Current limit in microamps */
+};
+
+struct wm831x_battery_pdata {
+	int enable;         /** Enable charging */
+	int fast_enable;    /** Enable fast charging */
+	int off_mask;       /** Mask OFF while charging */
+	int trickle_ilim;   /** Trickle charge current limit, in mA */
+	int vsel;           /** Target voltage, in mV */
+	int eoc_iterm;      /** End of trickle charge current, in mA */
+	int fast_ilim;      /** Fast charge current limit, in mA */
+	int timeout;        /** Charge cycle timeout, in minutes */
+};
+
+/* Sources for status LED configuration.  Values are register values
+ * plus 1 to allow for a zero default for preserve.
+ */
+enum wm831x_status_src {
+	WM831X_STATUS_PRESERVE = 0,  /* Keep the current hardware setting */
+	WM831X_STATUS_OTP = 1,
+	WM831X_STATUS_POWER = 2,
+	WM831X_STATUS_CHARGER = 3,
+	WM831X_STATUS_MANUAL = 4,
+};
+
+struct wm831x_status_pdata {
+	enum wm831x_status_src default_src;
+	const char *name;
+	const char *default_trigger;
+};
+
+struct wm831x_touch_pdata {
+	int fivewire;          /** 1 for five wire mode, 0 for 4 wire */
+	int isel;              /** Current for pen down (uA) */
+	int rpu;               /** Pen down sensitivity resistor divider */
+	int pressure;          /** Report pressure (boolean) */
+	int data_irq;          /** Touch data ready IRQ */
+};
+
+enum wm831x_watchdog_action {
+	WM831X_WDOG_NONE = 0,
+	WM831X_WDOG_INTERRUPT = 1,
+	WM831X_WDOG_RESET = 2,
+	WM831X_WDOG_WAKE = 3,
+};
+
+struct wm831x_watchdog_pdata {
+	enum wm831x_watchdog_action primary, secondary;
+	int update_gpio;
+	unsigned int software:1;
+};
+
+#define WM831X_MAX_STATUS 2
+#define WM831X_MAX_DCDC   4
+#define WM831X_MAX_EPE    2
+#define WM831X_MAX_LDO    11
+#define WM831X_MAX_ISINK  2
+
+struct wm831x_pdata {
+	/** Called before subdevices are set up */
+	int (*pre_init)(struct wm831x *wm831x);
+	/** Called after subdevices are set up */
+	int (*post_init)(struct wm831x *wm831x);
+
+	int gpio_base;
+	struct wm831x_backlight_pdata *backlight;
+	struct wm831x_backup_pdata *backup;
+	struct wm831x_battery_pdata *battery;
+	struct wm831x_touch_pdata *touch;
+	struct wm831x_watchdog_pdata *watchdog;
+
+	/** LED1 = 0 and so on */
+	struct wm831x_status_pdata *status[WM831X_MAX_STATUS];
+	/** DCDC1 = 0 and so on */
+	struct regulator_init_data *dcdc[WM831X_MAX_DCDC];
+	/** EPE1 = 0 and so on */
+	struct regulator_init_data *epe[WM831X_MAX_EPE];
+	/** LDO1 = 0 and so on */
+	struct regulator_init_data *ldo[WM831X_MAX_LDO];
+	/** ISINK1 = 0 and so on*/
+	struct regulator_init_data *isink[WM831X_MAX_ISINK];
+};
+
+#endif
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
new file mode 100644
index 000000000000..f95466343fb2
--- /dev/null
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -0,0 +1,1218 @@
+/*
+ * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_REGULATOR_H__
+#define __MFD_WM831X_REGULATOR_H__
+
+/*
+ * R16462 (0x404E) - Current Sink 1
+ */
+#define WM831X_CS1_ENA                          0x8000  /* CS1_ENA */
+#define WM831X_CS1_ENA_MASK                     0x8000  /* CS1_ENA */
+#define WM831X_CS1_ENA_SHIFT                        15  /* CS1_ENA */
+#define WM831X_CS1_ENA_WIDTH                         1  /* CS1_ENA */
+#define WM831X_CS1_DRIVE                        0x4000  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_MASK                   0x4000  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_SHIFT                      14  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_WIDTH                       1  /* CS1_DRIVE */
+#define WM831X_CS1_SLPENA                       0x1000  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_MASK                  0x1000  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_SHIFT                     12  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_WIDTH                      1  /* CS1_SLPENA */
+#define WM831X_CS1_OFF_RAMP_MASK                0x0C00  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_SHIFT                   10  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_WIDTH                    2  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_ON_RAMP_MASK                 0x0300  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_SHIFT                     8  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_WIDTH                     2  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ISEL_MASK                    0x003F  /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_SHIFT                        0  /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_WIDTH                        6  /* CS1_ISEL - [5:0] */
+
+/*
+ * R16463 (0x404F) - Current Sink 2
+ */
+#define WM831X_CS2_ENA                          0x8000  /* CS2_ENA */
+#define WM831X_CS2_ENA_MASK                     0x8000  /* CS2_ENA */
+#define WM831X_CS2_ENA_SHIFT                        15  /* CS2_ENA */
+#define WM831X_CS2_ENA_WIDTH                         1  /* CS2_ENA */
+#define WM831X_CS2_DRIVE                        0x4000  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_MASK                   0x4000  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_SHIFT                      14  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_WIDTH                       1  /* CS2_DRIVE */
+#define WM831X_CS2_SLPENA                       0x1000  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_MASK                  0x1000  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_SHIFT                     12  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_WIDTH                      1  /* CS2_SLPENA */
+#define WM831X_CS2_OFF_RAMP_MASK                0x0C00  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_SHIFT                   10  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_WIDTH                    2  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_ON_RAMP_MASK                 0x0300  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_SHIFT                     8  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_WIDTH                     2  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ISEL_MASK                    0x003F  /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_SHIFT                        0  /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_WIDTH                        6  /* CS2_ISEL - [5:0] */
+
+/*
+ * R16464 (0x4050) - DCDC Enable
+ */
+#define WM831X_EPE2_ENA                         0x0080  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_MASK                    0x0080  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_SHIFT                        7  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_WIDTH                        1  /* EPE2_ENA */
+#define WM831X_EPE1_ENA                         0x0040  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_MASK                    0x0040  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_SHIFT                        6  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_WIDTH                        1  /* EPE1_ENA */
+#define WM831X_DC4_ENA                          0x0008  /* DC4_ENA */
+#define WM831X_DC4_ENA_MASK                     0x0008  /* DC4_ENA */
+#define WM831X_DC4_ENA_SHIFT                         3  /* DC4_ENA */
+#define WM831X_DC4_ENA_WIDTH                         1  /* DC4_ENA */
+#define WM831X_DC3_ENA                          0x0004  /* DC3_ENA */
+#define WM831X_DC3_ENA_MASK                     0x0004  /* DC3_ENA */
+#define WM831X_DC3_ENA_SHIFT                         2  /* DC3_ENA */
+#define WM831X_DC3_ENA_WIDTH                         1  /* DC3_ENA */
+#define WM831X_DC2_ENA                          0x0002  /* DC2_ENA */
+#define WM831X_DC2_ENA_MASK                     0x0002  /* DC2_ENA */
+#define WM831X_DC2_ENA_SHIFT                         1  /* DC2_ENA */
+#define WM831X_DC2_ENA_WIDTH                         1  /* DC2_ENA */
+#define WM831X_DC1_ENA                          0x0001  /* DC1_ENA */
+#define WM831X_DC1_ENA_MASK                     0x0001  /* DC1_ENA */
+#define WM831X_DC1_ENA_SHIFT                         0  /* DC1_ENA */
+#define WM831X_DC1_ENA_WIDTH                         1  /* DC1_ENA */
+
+/*
+ * R16465 (0x4051) - LDO Enable
+ */
+#define WM831X_LDO11_ENA                        0x0400  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_MASK                   0x0400  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_SHIFT                      10  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_WIDTH                       1  /* LDO11_ENA */
+#define WM831X_LDO10_ENA                        0x0200  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_MASK                   0x0200  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_SHIFT                       9  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_WIDTH                       1  /* LDO10_ENA */
+#define WM831X_LDO9_ENA                         0x0100  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_MASK                    0x0100  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_SHIFT                        8  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_WIDTH                        1  /* LDO9_ENA */
+#define WM831X_LDO8_ENA                         0x0080  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_MASK                    0x0080  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_SHIFT                        7  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_WIDTH                        1  /* LDO8_ENA */
+#define WM831X_LDO7_ENA                         0x0040  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_MASK                    0x0040  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_SHIFT                        6  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_WIDTH                        1  /* LDO7_ENA */
+#define WM831X_LDO6_ENA                         0x0020  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_MASK                    0x0020  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_SHIFT                        5  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_WIDTH                        1  /* LDO6_ENA */
+#define WM831X_LDO5_ENA                         0x0010  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_MASK                    0x0010  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_SHIFT                        4  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_WIDTH                        1  /* LDO5_ENA */
+#define WM831X_LDO4_ENA                         0x0008  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_MASK                    0x0008  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_SHIFT                        3  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_WIDTH                        1  /* LDO4_ENA */
+#define WM831X_LDO3_ENA                         0x0004  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_MASK                    0x0004  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_SHIFT                        2  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_WIDTH                        1  /* LDO3_ENA */
+#define WM831X_LDO2_ENA                         0x0002  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_MASK                    0x0002  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_SHIFT                        1  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_WIDTH                        1  /* LDO2_ENA */
+#define WM831X_LDO1_ENA                         0x0001  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_MASK                    0x0001  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_SHIFT                        0  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
+
+/*
+ * R16466 (0x4052) - DCDC Status
+ */
+#define WM831X_EPE2_STS                         0x0080  /* EPE2_STS */
+#define WM831X_EPE2_STS_MASK                    0x0080  /* EPE2_STS */
+#define WM831X_EPE2_STS_SHIFT                        7  /* EPE2_STS */
+#define WM831X_EPE2_STS_WIDTH                        1  /* EPE2_STS */
+#define WM831X_EPE1_STS                         0x0040  /* EPE1_STS */
+#define WM831X_EPE1_STS_MASK                    0x0040  /* EPE1_STS */
+#define WM831X_EPE1_STS_SHIFT                        6  /* EPE1_STS */
+#define WM831X_EPE1_STS_WIDTH                        1  /* EPE1_STS */
+#define WM831X_DC4_STS                          0x0008  /* DC4_STS */
+#define WM831X_DC4_STS_MASK                     0x0008  /* DC4_STS */
+#define WM831X_DC4_STS_SHIFT                         3  /* DC4_STS */
+#define WM831X_DC4_STS_WIDTH                         1  /* DC4_STS */
+#define WM831X_DC3_STS                          0x0004  /* DC3_STS */
+#define WM831X_DC3_STS_MASK                     0x0004  /* DC3_STS */
+#define WM831X_DC3_STS_SHIFT                         2  /* DC3_STS */
+#define WM831X_DC3_STS_WIDTH                         1  /* DC3_STS */
+#define WM831X_DC2_STS                          0x0002  /* DC2_STS */
+#define WM831X_DC2_STS_MASK                     0x0002  /* DC2_STS */
+#define WM831X_DC2_STS_SHIFT                         1  /* DC2_STS */
+#define WM831X_DC2_STS_WIDTH                         1  /* DC2_STS */
+#define WM831X_DC1_STS                          0x0001  /* DC1_STS */
+#define WM831X_DC1_STS_MASK                     0x0001  /* DC1_STS */
+#define WM831X_DC1_STS_SHIFT                         0  /* DC1_STS */
+#define WM831X_DC1_STS_WIDTH                         1  /* DC1_STS */
+
+/*
+ * R16467 (0x4053) - LDO Status
+ */
+#define WM831X_LDO11_STS                        0x0400  /* LDO11_STS */
+#define WM831X_LDO11_STS_MASK                   0x0400  /* LDO11_STS */
+#define WM831X_LDO11_STS_SHIFT                      10  /* LDO11_STS */
+#define WM831X_LDO11_STS_WIDTH                       1  /* LDO11_STS */
+#define WM831X_LDO10_STS                        0x0200  /* LDO10_STS */
+#define WM831X_LDO10_STS_MASK                   0x0200  /* LDO10_STS */
+#define WM831X_LDO10_STS_SHIFT                       9  /* LDO10_STS */
+#define WM831X_LDO10_STS_WIDTH                       1  /* LDO10_STS */
+#define WM831X_LDO9_STS                         0x0100  /* LDO9_STS */
+#define WM831X_LDO9_STS_MASK                    0x0100  /* LDO9_STS */
+#define WM831X_LDO9_STS_SHIFT                        8  /* LDO9_STS */
+#define WM831X_LDO9_STS_WIDTH                        1  /* LDO9_STS */
+#define WM831X_LDO8_STS                         0x0080  /* LDO8_STS */
+#define WM831X_LDO8_STS_MASK                    0x0080  /* LDO8_STS */
+#define WM831X_LDO8_STS_SHIFT                        7  /* LDO8_STS */
+#define WM831X_LDO8_STS_WIDTH                        1  /* LDO8_STS */
+#define WM831X_LDO7_STS                         0x0040  /* LDO7_STS */
+#define WM831X_LDO7_STS_MASK                    0x0040  /* LDO7_STS */
+#define WM831X_LDO7_STS_SHIFT                        6  /* LDO7_STS */
+#define WM831X_LDO7_STS_WIDTH                        1  /* LDO7_STS */
+#define WM831X_LDO6_STS                         0x0020  /* LDO6_STS */
+#define WM831X_LDO6_STS_MASK                    0x0020  /* LDO6_STS */
+#define WM831X_LDO6_STS_SHIFT                        5  /* LDO6_STS */
+#define WM831X_LDO6_STS_WIDTH                        1  /* LDO6_STS */
+#define WM831X_LDO5_STS                         0x0010  /* LDO5_STS */
+#define WM831X_LDO5_STS_MASK                    0x0010  /* LDO5_STS */
+#define WM831X_LDO5_STS_SHIFT                        4  /* LDO5_STS */
+#define WM831X_LDO5_STS_WIDTH                        1  /* LDO5_STS */
+#define WM831X_LDO4_STS                         0x0008  /* LDO4_STS */
+#define WM831X_LDO4_STS_MASK                    0x0008  /* LDO4_STS */
+#define WM831X_LDO4_STS_SHIFT                        3  /* LDO4_STS */
+#define WM831X_LDO4_STS_WIDTH                        1  /* LDO4_STS */
+#define WM831X_LDO3_STS                         0x0004  /* LDO3_STS */
+#define WM831X_LDO3_STS_MASK                    0x0004  /* LDO3_STS */
+#define WM831X_LDO3_STS_SHIFT                        2  /* LDO3_STS */
+#define WM831X_LDO3_STS_WIDTH                        1  /* LDO3_STS */
+#define WM831X_LDO2_STS                         0x0002  /* LDO2_STS */
+#define WM831X_LDO2_STS_MASK                    0x0002  /* LDO2_STS */
+#define WM831X_LDO2_STS_SHIFT                        1  /* LDO2_STS */
+#define WM831X_LDO2_STS_WIDTH                        1  /* LDO2_STS */
+#define WM831X_LDO1_STS                         0x0001  /* LDO1_STS */
+#define WM831X_LDO1_STS_MASK                    0x0001  /* LDO1_STS */
+#define WM831X_LDO1_STS_SHIFT                        0  /* LDO1_STS */
+#define WM831X_LDO1_STS_WIDTH                        1  /* LDO1_STS */
+
+/*
+ * R16468 (0x4054) - DCDC UV Status
+ */
+#define WM831X_DC2_OV_STS                       0x2000  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_MASK                  0x2000  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_SHIFT                     13  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_WIDTH                      1  /* DC2_OV_STS */
+#define WM831X_DC1_OV_STS                       0x1000  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_MASK                  0x1000  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_SHIFT                     12  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_WIDTH                      1  /* DC1_OV_STS */
+#define WM831X_DC2_HC_STS                       0x0200  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_MASK                  0x0200  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_SHIFT                      9  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_WIDTH                      1  /* DC2_HC_STS */
+#define WM831X_DC1_HC_STS                       0x0100  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_MASK                  0x0100  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_SHIFT                      8  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_WIDTH                      1  /* DC1_HC_STS */
+#define WM831X_DC4_UV_STS                       0x0008  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_MASK                  0x0008  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_SHIFT                      3  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_WIDTH                      1  /* DC4_UV_STS */
+#define WM831X_DC3_UV_STS                       0x0004  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_MASK                  0x0004  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_SHIFT                      2  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_WIDTH                      1  /* DC3_UV_STS */
+#define WM831X_DC2_UV_STS                       0x0002  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_MASK                  0x0002  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_SHIFT                      1  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_WIDTH                      1  /* DC2_UV_STS */
+#define WM831X_DC1_UV_STS                       0x0001  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_MASK                  0x0001  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_SHIFT                      0  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_WIDTH                      1  /* DC1_UV_STS */
+
+/*
+ * R16469 (0x4055) - LDO UV Status
+ */
+#define WM831X_INTLDO_UV_STS                    0x8000  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_MASK               0x8000  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_SHIFT                  15  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_WIDTH                   1  /* INTLDO_UV_STS */
+#define WM831X_LDO10_UV_STS                     0x0200  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_MASK                0x0200  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_SHIFT                    9  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_WIDTH                    1  /* LDO10_UV_STS */
+#define WM831X_LDO9_UV_STS                      0x0100  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_MASK                 0x0100  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_SHIFT                     8  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_WIDTH                     1  /* LDO9_UV_STS */
+#define WM831X_LDO8_UV_STS                      0x0080  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_MASK                 0x0080  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_SHIFT                     7  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_WIDTH                     1  /* LDO8_UV_STS */
+#define WM831X_LDO7_UV_STS                      0x0040  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_MASK                 0x0040  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_SHIFT                     6  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_WIDTH                     1  /* LDO7_UV_STS */
+#define WM831X_LDO6_UV_STS                      0x0020  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_MASK                 0x0020  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_SHIFT                     5  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_WIDTH                     1  /* LDO6_UV_STS */
+#define WM831X_LDO5_UV_STS                      0x0010  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_MASK                 0x0010  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_SHIFT                     4  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_WIDTH                     1  /* LDO5_UV_STS */
+#define WM831X_LDO4_UV_STS                      0x0008  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_MASK                 0x0008  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_SHIFT                     3  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_WIDTH                     1  /* LDO4_UV_STS */
+#define WM831X_LDO3_UV_STS                      0x0004  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_MASK                 0x0004  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_SHIFT                     2  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_WIDTH                     1  /* LDO3_UV_STS */
+#define WM831X_LDO2_UV_STS                      0x0002  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_MASK                 0x0002  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_SHIFT                     1  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_WIDTH                     1  /* LDO2_UV_STS */
+#define WM831X_LDO1_UV_STS                      0x0001  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_MASK                 0x0001  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_SHIFT                     0  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_WIDTH                     1  /* LDO1_UV_STS */
+
+/*
+ * R16470 (0x4056) - DC1 Control 1
+ */
+#define WM831X_DC1_RATE_MASK                    0xC000  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_SHIFT                       14  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_WIDTH                        2  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_PHASE                        0x1000  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_MASK                   0x1000  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_SHIFT                      12  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_WIDTH                       1  /* DC1_PHASE */
+#define WM831X_DC1_FREQ_MASK                    0x0300  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_SHIFT                        8  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_WIDTH                        2  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FLT                          0x0080  /* DC1_FLT */
+#define WM831X_DC1_FLT_MASK                     0x0080  /* DC1_FLT */
+#define WM831X_DC1_FLT_SHIFT                         7  /* DC1_FLT */
+#define WM831X_DC1_FLT_WIDTH                         1  /* DC1_FLT */
+#define WM831X_DC1_SOFT_START_MASK              0x0030  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_SHIFT                  4  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_WIDTH                  2  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_CAP_MASK                     0x0003  /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_SHIFT                         0  /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_WIDTH                         2  /* DC1_CAP - [1:0] */
+
+/*
+ * R16471 (0x4057) - DC1 Control 2
+ */
+#define WM831X_DC1_ERR_ACT_MASK                 0xC000  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_SHIFT                    14  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_WIDTH                     2  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_HWC_SRC_MASK                 0x1800  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_SHIFT                    11  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_WIDTH                     2  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_VSEL                     0x0400  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_MASK                0x0400  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_SHIFT                   10  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_WIDTH                    1  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_MODE_MASK                0x0300  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_SHIFT                    8  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_WIDTH                    2  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HC_THR_MASK                  0x0070  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_SHIFT                      4  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_WIDTH                      3  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_IND_ENA                   0x0001  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_MASK              0x0001  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_SHIFT                  0  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_WIDTH                  1  /* DC1_HC_IND_ENA */
+
+/*
+ * R16472 (0x4058) - DC1 ON Config
+ */
+#define WM831X_DC1_ON_SLOT_MASK                 0xE000  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_SHIFT                    13  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_WIDTH                     3  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_MODE_MASK                 0x0300  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_SHIFT                     8  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_WIDTH                     2  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_VSEL_MASK                 0x007F  /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_SHIFT                     0  /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_WIDTH                     7  /* DC1_ON_VSEL - [6:0] */
+
+/*
+ * R16473 (0x4059) - DC1 SLEEP Control
+ */
+#define WM831X_DC1_SLP_SLOT_MASK                0xE000  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_SHIFT                   13  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_WIDTH                    3  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_MODE_MASK                0x0300  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_SHIFT                    8  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_WIDTH                    2  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_VSEL_MASK                0x007F  /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_SHIFT                    0  /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_WIDTH                    7  /* DC1_SLP_VSEL - [6:0] */
+
+/*
+ * R16474 (0x405A) - DC1 DVS Control
+ */
+#define WM831X_DC1_DVS_SRC_MASK                 0x1800  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_SHIFT                    11  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_WIDTH                     2  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_VSEL_MASK                0x007F  /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_SHIFT                    0  /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_WIDTH                    7  /* DC1_DVS_VSEL - [6:0] */
+
+/*
+ * R16475 (0x405B) - DC2 Control 1
+ */
+#define WM831X_DC2_RATE_MASK                    0xC000  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_SHIFT                       14  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_WIDTH                        2  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_PHASE                        0x1000  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_MASK                   0x1000  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_SHIFT                      12  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_WIDTH                       1  /* DC2_PHASE */
+#define WM831X_DC2_FREQ_MASK                    0x0300  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_SHIFT                        8  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_WIDTH                        2  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FLT                          0x0080  /* DC2_FLT */
+#define WM831X_DC2_FLT_MASK                     0x0080  /* DC2_FLT */
+#define WM831X_DC2_FLT_SHIFT                         7  /* DC2_FLT */
+#define WM831X_DC2_FLT_WIDTH                         1  /* DC2_FLT */
+#define WM831X_DC2_SOFT_START_MASK              0x0030  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_SHIFT                  4  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_WIDTH                  2  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_CAP_MASK                     0x0003  /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_SHIFT                         0  /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_WIDTH                         2  /* DC2_CAP - [1:0] */
+
+/*
+ * R16476 (0x405C) - DC2 Control 2
+ */
+#define WM831X_DC2_ERR_ACT_MASK                 0xC000  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_SHIFT                    14  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_WIDTH                     2  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_HWC_SRC_MASK                 0x1800  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_SHIFT                    11  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_WIDTH                     2  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_VSEL                     0x0400  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_MASK                0x0400  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_SHIFT                   10  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_WIDTH                    1  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_MODE_MASK                0x0300  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_SHIFT                    8  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_WIDTH                    2  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HC_THR_MASK                  0x0070  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_SHIFT                      4  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_WIDTH                      3  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_IND_ENA                   0x0001  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_MASK              0x0001  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_SHIFT                  0  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_WIDTH                  1  /* DC2_HC_IND_ENA */
+
+/*
+ * R16477 (0x405D) - DC2 ON Config
+ */
+#define WM831X_DC2_ON_SLOT_MASK                 0xE000  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_SHIFT                    13  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_WIDTH                     3  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_MODE_MASK                 0x0300  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_SHIFT                     8  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_WIDTH                     2  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_VSEL_MASK                 0x007F  /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_SHIFT                     0  /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_WIDTH                     7  /* DC2_ON_VSEL - [6:0] */
+
+/*
+ * R16478 (0x405E) - DC2 SLEEP Control
+ */
+#define WM831X_DC2_SLP_SLOT_MASK                0xE000  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_SHIFT                   13  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_WIDTH                    3  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_MODE_MASK                0x0300  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_SHIFT                    8  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_WIDTH                    2  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_VSEL_MASK                0x007F  /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_SHIFT                    0  /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_WIDTH                    7  /* DC2_SLP_VSEL - [6:0] */
+
+/*
+ * R16479 (0x405F) - DC2 DVS Control
+ */
+#define WM831X_DC2_DVS_SRC_MASK                 0x1800  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_SHIFT                    11  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_WIDTH                     2  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_VSEL_MASK                0x007F  /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_SHIFT                    0  /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_WIDTH                    7  /* DC2_DVS_VSEL - [6:0] */
+
+/*
+ * R16480 (0x4060) - DC3 Control 1
+ */
+#define WM831X_DC3_PHASE                        0x1000  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_MASK                   0x1000  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_SHIFT                      12  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_WIDTH                       1  /* DC3_PHASE */
+#define WM831X_DC3_FLT                          0x0080  /* DC3_FLT */
+#define WM831X_DC3_FLT_MASK                     0x0080  /* DC3_FLT */
+#define WM831X_DC3_FLT_SHIFT                         7  /* DC3_FLT */
+#define WM831X_DC3_FLT_WIDTH                         1  /* DC3_FLT */
+#define WM831X_DC3_SOFT_START_MASK              0x0030  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_SHIFT                  4  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_WIDTH                  2  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_STNBY_LIM_MASK               0x000C  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_SHIFT                   2  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_WIDTH                   2  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_CAP_MASK                     0x0003  /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_SHIFT                         0  /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_WIDTH                         2  /* DC3_CAP - [1:0] */
+
+/*
+ * R16481 (0x4061) - DC3 Control 2
+ */
+#define WM831X_DC3_ERR_ACT_MASK                 0xC000  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_SHIFT                    14  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_WIDTH                     2  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_HWC_SRC_MASK                 0x1800  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_SHIFT                    11  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_WIDTH                     2  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_VSEL                     0x0400  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_MASK                0x0400  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_SHIFT                   10  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_WIDTH                    1  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_MODE_MASK                0x0300  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_SHIFT                    8  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_WIDTH                    2  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_OVP                          0x0080  /* DC3_OVP */
+#define WM831X_DC3_OVP_MASK                     0x0080  /* DC3_OVP */
+#define WM831X_DC3_OVP_SHIFT                         7  /* DC3_OVP */
+#define WM831X_DC3_OVP_WIDTH                         1  /* DC3_OVP */
+
+/*
+ * R16482 (0x4062) - DC3 ON Config
+ */
+#define WM831X_DC3_ON_SLOT_MASK                 0xE000  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_SHIFT                    13  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_WIDTH                     3  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_MODE_MASK                 0x0300  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_SHIFT                     8  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_WIDTH                     2  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_VSEL_MASK                 0x007F  /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_SHIFT                     0  /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_WIDTH                     7  /* DC3_ON_VSEL - [6:0] */
+
+/*
+ * R16483 (0x4063) - DC3 SLEEP Control
+ */
+#define WM831X_DC3_SLP_SLOT_MASK                0xE000  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_SHIFT                   13  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_WIDTH                    3  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_MODE_MASK                0x0300  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_SHIFT                    8  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_WIDTH                    2  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_VSEL_MASK                0x007F  /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_SHIFT                    0  /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_WIDTH                    7  /* DC3_SLP_VSEL - [6:0] */
+
+/*
+ * R16484 (0x4064) - DC4 Control
+ */
+#define WM831X_DC4_ERR_ACT_MASK                 0xC000  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_SHIFT                    14  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_WIDTH                     2  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_HWC_SRC_MASK                 0x1800  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_SHIFT                    11  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_WIDTH                     2  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_MODE                     0x0100  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_MASK                0x0100  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_SHIFT                    8  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_WIDTH                    1  /* DC4_HWC_MODE */
+#define WM831X_DC4_RANGE_MASK                   0x000C  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_SHIFT                       2  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_WIDTH                       2  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_FBSRC                        0x0001  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_MASK                   0x0001  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_SHIFT                       0  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_WIDTH                       1  /* DC4_FBSRC */
+
+/*
+ * R16485 (0x4065) - DC4 SLEEP Control
+ */
+#define WM831X_DC4_SLPENA                       0x0100  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_MASK                  0x0100  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_SHIFT                      8  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_WIDTH                      1  /* DC4_SLPENA */
+
+/*
+ * R16488 (0x4068) - LDO1 Control
+ */
+#define WM831X_LDO1_ERR_ACT_MASK                0xC000  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_SHIFT                   14  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_WIDTH                    2  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_HWC_SRC_MASK                0x1800  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_SHIFT                   11  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_WIDTH                    2  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_VSEL                    0x0400  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_MASK               0x0400  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_SHIFT                  10  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_WIDTH                   1  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_MODE_MASK               0x0300  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_SHIFT                   8  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_WIDTH                   2  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_FLT                         0x0080  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_MASK                    0x0080  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_SHIFT                        7  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_WIDTH                        1  /* LDO1_FLT */
+#define WM831X_LDO1_SWI                         0x0040  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_MASK                    0x0040  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_SHIFT                        6  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_WIDTH                        1  /* LDO1_SWI */
+#define WM831X_LDO1_LP_MODE                     0x0001  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_MASK                0x0001  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_SHIFT                    0  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_WIDTH                    1  /* LDO1_LP_MODE */
+
+/*
+ * R16489 (0x4069) - LDO1 ON Control
+ */
+#define WM831X_LDO1_ON_SLOT_MASK                0xE000  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_SHIFT                   13  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_WIDTH                    3  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_MODE                     0x0100  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_MASK                0x0100  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_SHIFT                    8  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_WIDTH                    1  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_VSEL_MASK                0x001F  /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_SHIFT                    0  /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_WIDTH                    5  /* LDO1_ON_VSEL - [4:0] */
+
+/*
+ * R16490 (0x406A) - LDO1 SLEEP Control
+ */
+#define WM831X_LDO1_SLP_SLOT_MASK               0xE000  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_SHIFT                  13  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_WIDTH                   3  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_MODE                    0x0100  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_MASK               0x0100  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_SHIFT                   8  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_WIDTH                   1  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_VSEL_MASK               0x001F  /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_SHIFT                   0  /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_WIDTH                   5  /* LDO1_SLP_VSEL - [4:0] */
+
+/*
+ * R16491 (0x406B) - LDO2 Control
+ */
+#define WM831X_LDO2_ERR_ACT_MASK                0xC000  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_SHIFT                   14  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_WIDTH                    2  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_HWC_SRC_MASK                0x1800  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_SHIFT                   11  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_WIDTH                    2  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_VSEL                    0x0400  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_MASK               0x0400  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_SHIFT                  10  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_WIDTH                   1  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_MODE_MASK               0x0300  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_SHIFT                   8  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_WIDTH                   2  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_FLT                         0x0080  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_MASK                    0x0080  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_SHIFT                        7  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_WIDTH                        1  /* LDO2_FLT */
+#define WM831X_LDO2_SWI                         0x0040  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_MASK                    0x0040  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_SHIFT                        6  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_WIDTH                        1  /* LDO2_SWI */
+#define WM831X_LDO2_LP_MODE                     0x0001  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_MASK                0x0001  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_SHIFT                    0  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_WIDTH                    1  /* LDO2_LP_MODE */
+
+/*
+ * R16492 (0x406C) - LDO2 ON Control
+ */
+#define WM831X_LDO2_ON_SLOT_MASK                0xE000  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_SHIFT                   13  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_WIDTH                    3  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_MODE                     0x0100  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_MASK                0x0100  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_SHIFT                    8  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_WIDTH                    1  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_VSEL_MASK                0x001F  /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_SHIFT                    0  /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_WIDTH                    5  /* LDO2_ON_VSEL - [4:0] */
+
+/*
+ * R16493 (0x406D) - LDO2 SLEEP Control
+ */
+#define WM831X_LDO2_SLP_SLOT_MASK               0xE000  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_SHIFT                  13  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_WIDTH                   3  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_MODE                    0x0100  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_MASK               0x0100  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_SHIFT                   8  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_WIDTH                   1  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_VSEL_MASK               0x001F  /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_SHIFT                   0  /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_WIDTH                   5  /* LDO2_SLP_VSEL - [4:0] */
+
+/*
+ * R16494 (0x406E) - LDO3 Control
+ */
+#define WM831X_LDO3_ERR_ACT_MASK                0xC000  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_SHIFT                   14  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_WIDTH                    2  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_HWC_SRC_MASK                0x1800  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_SHIFT                   11  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_WIDTH                    2  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_VSEL                    0x0400  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_MASK               0x0400  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_SHIFT                  10  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_WIDTH                   1  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_MODE_MASK               0x0300  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_SHIFT                   8  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_WIDTH                   2  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_FLT                         0x0080  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_MASK                    0x0080  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_SHIFT                        7  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_WIDTH                        1  /* LDO3_FLT */
+#define WM831X_LDO3_SWI                         0x0040  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_MASK                    0x0040  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_SHIFT                        6  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_WIDTH                        1  /* LDO3_SWI */
+#define WM831X_LDO3_LP_MODE                     0x0001  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_MASK                0x0001  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_SHIFT                    0  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_WIDTH                    1  /* LDO3_LP_MODE */
+
+/*
+ * R16495 (0x406F) - LDO3 ON Control
+ */
+#define WM831X_LDO3_ON_SLOT_MASK                0xE000  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_SHIFT                   13  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_WIDTH                    3  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_MODE                     0x0100  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_MASK                0x0100  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_SHIFT                    8  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_WIDTH                    1  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_VSEL_MASK                0x001F  /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_SHIFT                    0  /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_WIDTH                    5  /* LDO3_ON_VSEL - [4:0] */
+
+/*
+ * R16496 (0x4070) - LDO3 SLEEP Control
+ */
+#define WM831X_LDO3_SLP_SLOT_MASK               0xE000  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_SHIFT                  13  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_WIDTH                   3  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_MODE                    0x0100  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_MASK               0x0100  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_SHIFT                   8  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_WIDTH                   1  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_VSEL_MASK               0x001F  /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_SHIFT                   0  /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_WIDTH                   5  /* LDO3_SLP_VSEL - [4:0] */
+
+/*
+ * R16497 (0x4071) - LDO4 Control
+ */
+#define WM831X_LDO4_ERR_ACT_MASK                0xC000  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_SHIFT                   14  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_WIDTH                    2  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_HWC_SRC_MASK                0x1800  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_SHIFT                   11  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_WIDTH                    2  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_VSEL                    0x0400  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_MASK               0x0400  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_SHIFT                  10  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_WIDTH                   1  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_MODE_MASK               0x0300  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_SHIFT                   8  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_WIDTH                   2  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_FLT                         0x0080  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_MASK                    0x0080  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_SHIFT                        7  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_WIDTH                        1  /* LDO4_FLT */
+#define WM831X_LDO4_SWI                         0x0040  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_MASK                    0x0040  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_SHIFT                        6  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_WIDTH                        1  /* LDO4_SWI */
+#define WM831X_LDO4_LP_MODE                     0x0001  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_MASK                0x0001  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_SHIFT                    0  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_WIDTH                    1  /* LDO4_LP_MODE */
+
+/*
+ * R16498 (0x4072) - LDO4 ON Control
+ */
+#define WM831X_LDO4_ON_SLOT_MASK                0xE000  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_SHIFT                   13  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_WIDTH                    3  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_MODE                     0x0100  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_MASK                0x0100  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_SHIFT                    8  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_WIDTH                    1  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_VSEL_MASK                0x001F  /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_SHIFT                    0  /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_WIDTH                    5  /* LDO4_ON_VSEL - [4:0] */
+
+/*
+ * R16499 (0x4073) - LDO4 SLEEP Control
+ */
+#define WM831X_LDO4_SLP_SLOT_MASK               0xE000  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_SHIFT                  13  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_WIDTH                   3  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_MODE                    0x0100  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_MASK               0x0100  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_SHIFT                   8  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_WIDTH                   1  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_VSEL_MASK               0x001F  /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_SHIFT                   0  /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_WIDTH                   5  /* LDO4_SLP_VSEL - [4:0] */
+
+/*
+ * R16500 (0x4074) - LDO5 Control
+ */
+#define WM831X_LDO5_ERR_ACT_MASK                0xC000  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_SHIFT                   14  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_WIDTH                    2  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_HWC_SRC_MASK                0x1800  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_SHIFT                   11  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_WIDTH                    2  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_VSEL                    0x0400  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_MASK               0x0400  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_SHIFT                  10  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_WIDTH                   1  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_MODE_MASK               0x0300  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_SHIFT                   8  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_WIDTH                   2  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_FLT                         0x0080  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_MASK                    0x0080  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_SHIFT                        7  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_WIDTH                        1  /* LDO5_FLT */
+#define WM831X_LDO5_SWI                         0x0040  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_MASK                    0x0040  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_SHIFT                        6  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_WIDTH                        1  /* LDO5_SWI */
+#define WM831X_LDO5_LP_MODE                     0x0001  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_MASK                0x0001  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_SHIFT                    0  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_WIDTH                    1  /* LDO5_LP_MODE */
+
+/*
+ * R16501 (0x4075) - LDO5 ON Control
+ */
+#define WM831X_LDO5_ON_SLOT_MASK                0xE000  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_SHIFT                   13  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_WIDTH                    3  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_MODE                     0x0100  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_MASK                0x0100  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_SHIFT                    8  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_WIDTH                    1  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_VSEL_MASK                0x001F  /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_SHIFT                    0  /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_WIDTH                    5  /* LDO5_ON_VSEL - [4:0] */
+
+/*
+ * R16502 (0x4076) - LDO5 SLEEP Control
+ */
+#define WM831X_LDO5_SLP_SLOT_MASK               0xE000  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_SHIFT                  13  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_WIDTH                   3  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_MODE                    0x0100  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_MASK               0x0100  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_SHIFT                   8  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_WIDTH                   1  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_VSEL_MASK               0x001F  /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_SHIFT                   0  /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_WIDTH                   5  /* LDO5_SLP_VSEL - [4:0] */
+
+/*
+ * R16503 (0x4077) - LDO6 Control
+ */
+#define WM831X_LDO6_ERR_ACT_MASK                0xC000  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_SHIFT                   14  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_WIDTH                    2  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_HWC_SRC_MASK                0x1800  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_SHIFT                   11  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_WIDTH                    2  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_VSEL                    0x0400  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_MASK               0x0400  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_SHIFT                  10  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_WIDTH                   1  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_MODE_MASK               0x0300  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_SHIFT                   8  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_WIDTH                   2  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_FLT                         0x0080  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_MASK                    0x0080  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_SHIFT                        7  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_WIDTH                        1  /* LDO6_FLT */
+#define WM831X_LDO6_SWI                         0x0040  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_MASK                    0x0040  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_SHIFT                        6  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_WIDTH                        1  /* LDO6_SWI */
+#define WM831X_LDO6_LP_MODE                     0x0001  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_MASK                0x0001  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_SHIFT                    0  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_WIDTH                    1  /* LDO6_LP_MODE */
+
+/*
+ * R16504 (0x4078) - LDO6 ON Control
+ */
+#define WM831X_LDO6_ON_SLOT_MASK                0xE000  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_SHIFT                   13  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_WIDTH                    3  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_MODE                     0x0100  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_MASK                0x0100  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_SHIFT                    8  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_WIDTH                    1  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_VSEL_MASK                0x001F  /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_SHIFT                    0  /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_WIDTH                    5  /* LDO6_ON_VSEL - [4:0] */
+
+/*
+ * R16505 (0x4079) - LDO6 SLEEP Control
+ */
+#define WM831X_LDO6_SLP_SLOT_MASK               0xE000  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_SHIFT                  13  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_WIDTH                   3  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_MODE                    0x0100  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_MASK               0x0100  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_SHIFT                   8  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_WIDTH                   1  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_VSEL_MASK               0x001F  /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_SHIFT                   0  /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_WIDTH                   5  /* LDO6_SLP_VSEL - [4:0] */
+
+/*
+ * R16506 (0x407A) - LDO7 Control
+ */
+#define WM831X_LDO7_ERR_ACT_MASK                0xC000  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_SHIFT                   14  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_WIDTH                    2  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_HWC_SRC_MASK                0x1800  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_SHIFT                   11  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_WIDTH                    2  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_VSEL                    0x0400  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_MASK               0x0400  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_SHIFT                  10  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_WIDTH                   1  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_MODE_MASK               0x0300  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_SHIFT                   8  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_WIDTH                   2  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_FLT                         0x0080  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_MASK                    0x0080  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_SHIFT                        7  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_WIDTH                        1  /* LDO7_FLT */
+#define WM831X_LDO7_SWI                         0x0040  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_MASK                    0x0040  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_SHIFT                        6  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_WIDTH                        1  /* LDO7_SWI */
+
+/*
+ * R16507 (0x407B) - LDO7 ON Control
+ */
+#define WM831X_LDO7_ON_SLOT_MASK                0xE000  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_SHIFT                   13  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_WIDTH                    3  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_MODE                     0x0100  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_MASK                0x0100  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_SHIFT                    8  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_WIDTH                    1  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_VSEL_MASK                0x001F  /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_SHIFT                    0  /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_WIDTH                    5  /* LDO7_ON_VSEL - [4:0] */
+
+/*
+ * R16508 (0x407C) - LDO7 SLEEP Control
+ */
+#define WM831X_LDO7_SLP_SLOT_MASK               0xE000  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_SHIFT                  13  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_WIDTH                   3  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_MODE                    0x0100  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_MASK               0x0100  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_SHIFT                   8  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_WIDTH                   1  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_VSEL_MASK               0x001F  /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_SHIFT                   0  /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_WIDTH                   5  /* LDO7_SLP_VSEL - [4:0] */
+
+/*
+ * R16509 (0x407D) - LDO8 Control
+ */
+#define WM831X_LDO8_ERR_ACT_MASK                0xC000  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_SHIFT                   14  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_WIDTH                    2  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_HWC_SRC_MASK                0x1800  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_SHIFT                   11  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_WIDTH                    2  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_VSEL                    0x0400  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_MASK               0x0400  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_SHIFT                  10  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_WIDTH                   1  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_MODE_MASK               0x0300  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_SHIFT                   8  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_WIDTH                   2  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_FLT                         0x0080  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_MASK                    0x0080  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_SHIFT                        7  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_WIDTH                        1  /* LDO8_FLT */
+#define WM831X_LDO8_SWI                         0x0040  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_MASK                    0x0040  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_SHIFT                        6  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_WIDTH                        1  /* LDO8_SWI */
+
+/*
+ * R16510 (0x407E) - LDO8 ON Control
+ */
+#define WM831X_LDO8_ON_SLOT_MASK                0xE000  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_SHIFT                   13  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_WIDTH                    3  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_MODE                     0x0100  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_MASK                0x0100  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_SHIFT                    8  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_WIDTH                    1  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_VSEL_MASK                0x001F  /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_SHIFT                    0  /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_WIDTH                    5  /* LDO8_ON_VSEL - [4:0] */
+
+/*
+ * R16511 (0x407F) - LDO8 SLEEP Control
+ */
+#define WM831X_LDO8_SLP_SLOT_MASK               0xE000  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_SHIFT                  13  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_WIDTH                   3  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_MODE                    0x0100  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_MASK               0x0100  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_SHIFT                   8  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_WIDTH                   1  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_VSEL_MASK               0x001F  /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_SHIFT                   0  /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_WIDTH                   5  /* LDO8_SLP_VSEL - [4:0] */
+
+/*
+ * R16512 (0x4080) - LDO9 Control
+ */
+#define WM831X_LDO9_ERR_ACT_MASK                0xC000  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_SHIFT                   14  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_WIDTH                    2  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_HWC_SRC_MASK                0x1800  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_SHIFT                   11  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_WIDTH                    2  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_VSEL                    0x0400  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_MASK               0x0400  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_SHIFT                  10  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_WIDTH                   1  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_MODE_MASK               0x0300  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_SHIFT                   8  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_WIDTH                   2  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_FLT                         0x0080  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_MASK                    0x0080  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_SHIFT                        7  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_WIDTH                        1  /* LDO9_FLT */
+#define WM831X_LDO9_SWI                         0x0040  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_MASK                    0x0040  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_SHIFT                        6  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_WIDTH                        1  /* LDO9_SWI */
+
+/*
+ * R16513 (0x4081) - LDO9 ON Control
+ */
+#define WM831X_LDO9_ON_SLOT_MASK                0xE000  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_SHIFT                   13  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_WIDTH                    3  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_MODE                     0x0100  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_MASK                0x0100  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_SHIFT                    8  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_WIDTH                    1  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_VSEL_MASK                0x001F  /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_SHIFT                    0  /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_WIDTH                    5  /* LDO9_ON_VSEL - [4:0] */
+
+/*
+ * R16514 (0x4082) - LDO9 SLEEP Control
+ */
+#define WM831X_LDO9_SLP_SLOT_MASK               0xE000  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_SHIFT                  13  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_WIDTH                   3  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_MODE                    0x0100  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_MASK               0x0100  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_SHIFT                   8  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_WIDTH                   1  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_VSEL_MASK               0x001F  /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_SHIFT                   0  /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_WIDTH                   5  /* LDO9_SLP_VSEL - [4:0] */
+
+/*
+ * R16515 (0x4083) - LDO10 Control
+ */
+#define WM831X_LDO10_ERR_ACT_MASK               0xC000  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_SHIFT                  14  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_WIDTH                   2  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_HWC_SRC_MASK               0x1800  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_SHIFT                  11  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_WIDTH                   2  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_VSEL                   0x0400  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_MASK              0x0400  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_SHIFT                 10  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_WIDTH                  1  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_MODE_MASK              0x0300  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_SHIFT                  8  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_WIDTH                  2  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_FLT                        0x0080  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_MASK                   0x0080  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_SHIFT                       7  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_WIDTH                       1  /* LDO10_FLT */
+#define WM831X_LDO10_SWI                        0x0040  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_MASK                   0x0040  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_SHIFT                       6  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_WIDTH                       1  /* LDO10_SWI */
+
+/*
+ * R16516 (0x4084) - LDO10 ON Control
+ */
+#define WM831X_LDO10_ON_SLOT_MASK               0xE000  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_SHIFT                  13  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_WIDTH                   3  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_MODE                    0x0100  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_MASK               0x0100  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_SHIFT                   8  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_WIDTH                   1  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_VSEL_MASK               0x001F  /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_SHIFT                   0  /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_WIDTH                   5  /* LDO10_ON_VSEL - [4:0] */
+
+/*
+ * R16517 (0x4085) - LDO10 SLEEP Control
+ */
+#define WM831X_LDO10_SLP_SLOT_MASK              0xE000  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_SHIFT                 13  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_WIDTH                  3  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_MODE                   0x0100  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_MASK              0x0100  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_SHIFT                  8  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_WIDTH                  1  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_VSEL_MASK              0x001F  /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_SHIFT                  0  /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_WIDTH                  5  /* LDO10_SLP_VSEL - [4:0] */
+
+/*
+ * R16519 (0x4087) - LDO11 ON Control
+ */
+#define WM831X_LDO11_ON_SLOT_MASK               0xE000  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_SHIFT                  13  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_WIDTH                   3  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_OFFENA                     0x1000  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_MASK                0x1000  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_SHIFT                   12  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_WIDTH                    1  /* LDO11_OFFENA */
+#define WM831X_LDO11_VSEL_SRC                   0x0080  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_MASK              0x0080  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_SHIFT                  7  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_WIDTH                  1  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_ON_VSEL_MASK               0x000F  /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_SHIFT                   0  /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_WIDTH                   4  /* LDO11_ON_VSEL - [3:0] */
+
+/*
+ * R16520 (0x4088) - LDO11 SLEEP Control
+ */
+#define WM831X_LDO11_SLP_SLOT_MASK              0xE000  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_SHIFT                 13  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_WIDTH                  3  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_VSEL_MASK              0x000F  /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_SHIFT                  0  /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_WIDTH                  4  /* LDO11_SLP_VSEL - [3:0] */
+
+/*
+ * R16526 (0x408E) - Power Good Source 1
+ */
+#define WM831X_DC4_OK                           0x0008  /* DC4_OK */
+#define WM831X_DC4_OK_MASK                      0x0008  /* DC4_OK */
+#define WM831X_DC4_OK_SHIFT                          3  /* DC4_OK */
+#define WM831X_DC4_OK_WIDTH                          1  /* DC4_OK */
+#define WM831X_DC3_OK                           0x0004  /* DC3_OK */
+#define WM831X_DC3_OK_MASK                      0x0004  /* DC3_OK */
+#define WM831X_DC3_OK_SHIFT                          2  /* DC3_OK */
+#define WM831X_DC3_OK_WIDTH                          1  /* DC3_OK */
+#define WM831X_DC2_OK                           0x0002  /* DC2_OK */
+#define WM831X_DC2_OK_MASK                      0x0002  /* DC2_OK */
+#define WM831X_DC2_OK_SHIFT                          1  /* DC2_OK */
+#define WM831X_DC2_OK_WIDTH                          1  /* DC2_OK */
+#define WM831X_DC1_OK                           0x0001  /* DC1_OK */
+#define WM831X_DC1_OK_MASK                      0x0001  /* DC1_OK */
+#define WM831X_DC1_OK_SHIFT                          0  /* DC1_OK */
+#define WM831X_DC1_OK_WIDTH                          1  /* DC1_OK */
+
+/*
+ * R16527 (0x408F) - Power Good Source 2
+ */
+#define WM831X_LDO10_OK                         0x0200  /* LDO10_OK */
+#define WM831X_LDO10_OK_MASK                    0x0200  /* LDO10_OK */
+#define WM831X_LDO10_OK_SHIFT                        9  /* LDO10_OK */
+#define WM831X_LDO10_OK_WIDTH                        1  /* LDO10_OK */
+#define WM831X_LDO9_OK                          0x0100  /* LDO9_OK */
+#define WM831X_LDO9_OK_MASK                     0x0100  /* LDO9_OK */
+#define WM831X_LDO9_OK_SHIFT                         8  /* LDO9_OK */
+#define WM831X_LDO9_OK_WIDTH                         1  /* LDO9_OK */
+#define WM831X_LDO8_OK                          0x0080  /* LDO8_OK */
+#define WM831X_LDO8_OK_MASK                     0x0080  /* LDO8_OK */
+#define WM831X_LDO8_OK_SHIFT                         7  /* LDO8_OK */
+#define WM831X_LDO8_OK_WIDTH                         1  /* LDO8_OK */
+#define WM831X_LDO7_OK                          0x0040  /* LDO7_OK */
+#define WM831X_LDO7_OK_MASK                     0x0040  /* LDO7_OK */
+#define WM831X_LDO7_OK_SHIFT                         6  /* LDO7_OK */
+#define WM831X_LDO7_OK_WIDTH                         1  /* LDO7_OK */
+#define WM831X_LDO6_OK                          0x0020  /* LDO6_OK */
+#define WM831X_LDO6_OK_MASK                     0x0020  /* LDO6_OK */
+#define WM831X_LDO6_OK_SHIFT                         5  /* LDO6_OK */
+#define WM831X_LDO6_OK_WIDTH                         1  /* LDO6_OK */
+#define WM831X_LDO5_OK                          0x0010  /* LDO5_OK */
+#define WM831X_LDO5_OK_MASK                     0x0010  /* LDO5_OK */
+#define WM831X_LDO5_OK_SHIFT                         4  /* LDO5_OK */
+#define WM831X_LDO5_OK_WIDTH                         1  /* LDO5_OK */
+#define WM831X_LDO4_OK                          0x0008  /* LDO4_OK */
+#define WM831X_LDO4_OK_MASK                     0x0008  /* LDO4_OK */
+#define WM831X_LDO4_OK_SHIFT                         3  /* LDO4_OK */
+#define WM831X_LDO4_OK_WIDTH                         1  /* LDO4_OK */
+#define WM831X_LDO3_OK                          0x0004  /* LDO3_OK */
+#define WM831X_LDO3_OK_MASK                     0x0004  /* LDO3_OK */
+#define WM831X_LDO3_OK_SHIFT                         2  /* LDO3_OK */
+#define WM831X_LDO3_OK_WIDTH                         1  /* LDO3_OK */
+#define WM831X_LDO2_OK                          0x0002  /* LDO2_OK */
+#define WM831X_LDO2_OK_MASK                     0x0002  /* LDO2_OK */
+#define WM831X_LDO2_OK_SHIFT                         1  /* LDO2_OK */
+#define WM831X_LDO2_OK_WIDTH                         1  /* LDO2_OK */
+#define WM831X_LDO1_OK                          0x0001  /* LDO1_OK */
+#define WM831X_LDO1_OK_MASK                     0x0001  /* LDO1_OK */
+#define WM831X_LDO1_OK_SHIFT                         0  /* LDO1_OK */
+#define WM831X_LDO1_OK_WIDTH                         1  /* LDO1_OK */
+
+#define WM831X_ISINK_MAX_ISEL 56
+extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
+
+#endif
diff --git a/include/linux/mfd/wm831x/watchdog.h b/include/linux/mfd/wm831x/watchdog.h
new file mode 100644
index 000000000000..97a99b52956f
--- /dev/null
+++ b/include/linux/mfd/wm831x/watchdog.h
@@ -0,0 +1,52 @@
+/*
+ * include/linux/mfd/wm831x/watchdog.h -- Watchdog for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_WATCHDOG_H__
+#define __MFD_WM831X_WATCHDOG_H__
+
+
+/*
+ * R16388 (0x4004) - Watchdog
+ */
+#define WM831X_WDOG_ENA                         0x8000  /* WDOG_ENA */
+#define WM831X_WDOG_ENA_MASK                    0x8000  /* WDOG_ENA */
+#define WM831X_WDOG_ENA_SHIFT                       15  /* WDOG_ENA */
+#define WM831X_WDOG_ENA_WIDTH                        1  /* WDOG_ENA */
+#define WM831X_WDOG_DEBUG                       0x4000  /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_MASK                  0x4000  /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_SHIFT                     14  /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_WIDTH                      1  /* WDOG_DEBUG */
+#define WM831X_WDOG_RST_SRC                     0x2000  /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_MASK                0x2000  /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_SHIFT                   13  /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_WIDTH                    1  /* WDOG_RST_SRC */
+#define WM831X_WDOG_SLPENA                      0x1000  /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_MASK                 0x1000  /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_SHIFT                    12  /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_WIDTH                     1  /* WDOG_SLPENA */
+#define WM831X_WDOG_RESET                       0x0800  /* WDOG_RESET */
+#define WM831X_WDOG_RESET_MASK                  0x0800  /* WDOG_RESET */
+#define WM831X_WDOG_RESET_SHIFT                     11  /* WDOG_RESET */
+#define WM831X_WDOG_RESET_WIDTH                      1  /* WDOG_RESET */
+#define WM831X_WDOG_SECACT_MASK                 0x0300  /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_SECACT_SHIFT                     8  /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_SECACT_WIDTH                     2  /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_PRIMACT_MASK                0x0030  /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_PRIMACT_SHIFT                    4  /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_PRIMACT_WIDTH                    2  /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_TO_MASK                     0x0007  /* WDOG_TO - [2:0] */
+#define WM831X_WDOG_TO_SHIFT                         0  /* WDOG_TO - [2:0] */
+#define WM831X_WDOG_TO_WIDTH                         3  /* WDOG_TO - [2:0] */
+
+#endif
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 42cca672f340..1d595de6a055 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -605,6 +605,11 @@ struct wm8350_irq {
 	void *data;
 };
 
+struct wm8350_hwmon {
+	struct platform_device *pdev;
+	struct device *classdev;
+};
+
 struct wm8350 {
 	struct device *dev;
 
@@ -621,7 +626,6 @@ struct wm8350 {
 	struct mutex auxadc_mutex;
 
 	/* Interrupt handling */
-	struct work_struct irq_work;
 	struct mutex irq_mutex; /* IRQ table mutex */
 	struct wm8350_irq irq[WM8350_NUM_IRQ];
 	int chip_irq;
@@ -629,6 +633,7 @@ struct wm8350 {
 	/* Client devices */
 	struct wm8350_codec codec;
 	struct wm8350_gpio gpio;
+	struct wm8350_hwmon hwmon;
 	struct wm8350_pmic pmic;
 	struct wm8350_power power;
 	struct wm8350_rtc rtc;
diff --git a/include/linux/net.h b/include/linux/net.h
index 4fc2ffd527f9..9040a10584f7 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -57,6 +57,7 @@ typedef enum {
 #include <linux/random.h>
 #include <linux/wait.h>
 #include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/kmemcheck.h>
 
 struct poll_table_struct;
 struct pipe_inode_info;
@@ -127,7 +128,11 @@ enum sock_shutdown_cmd {
  */
 struct socket {
 	socket_state		state;
+
+	kmemcheck_bitfield_begin(type);
 	short			type;
+	kmemcheck_bitfield_end(type);
+
 	unsigned long		flags;
 	/*
 	 * Please keep fasync_list & wait fields in the same cache line
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a9aa4b5917d7..94958c109761 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1873,7 +1873,8 @@ extern void		__dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct
 extern int		dev_set_promiscuity(struct net_device *dev, int inc);
 extern int		dev_set_allmulti(struct net_device *dev, int inc);
 extern void		netdev_state_change(struct net_device *dev);
-extern void		netdev_bonding_change(struct net_device *dev);
+extern void		netdev_bonding_change(struct net_device *dev,
+					      unsigned long event);
 extern void		netdev_features_change(struct net_device *dev);
 /* Load a device via the kmod */
 extern void		dev_load(struct net *net, const char *name);
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 0fbecbbe8e9e..080f6ba9e73a 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -176,12 +176,16 @@ struct netlink_skb_parms
 #define NETLINK_CREDS(skb)	(&NETLINK_CB((skb)).creds)
 
 
+extern void netlink_table_grab(void);
+extern void netlink_table_ungrab(void);
+
 extern struct sock *netlink_kernel_create(struct net *net,
 					  int unit,unsigned int groups,
 					  void (*input)(struct sk_buff *skb),
 					  struct mutex *cb_mutex,
 					  struct module *module);
 extern void netlink_kernel_release(struct sock *sk);
+extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups);
 extern int netlink_change_ngroups(struct sock *sk, unsigned int groups);
 extern void netlink_clear_multicast_users(struct sock *sk, unsigned int group);
 extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err);
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 81bc252dc8ac..44428d247dbe 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -199,6 +199,8 @@ static inline int notifier_to_errno(int ret)
 #define NETDEV_FEAT_CHANGE	0x000B
 #define NETDEV_BONDING_FAILOVER 0x000C
 #define NETDEV_PRE_UP		0x000D
+#define NETDEV_BONDING_OLDTYPE  0x000E
+#define NETDEV_BONDING_NEWTYPE  0x000F
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 8975add8668f..3b6b788fe2b5 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1529,6 +1529,8 @@
 #define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
 #define PCI_DEVICE_ID_ARTOP_ATP865	0x0008
 #define PCI_DEVICE_ID_ARTOP_ATP865R	0x0009
+#define PCI_DEVICE_ID_ARTOP_ATP867A	0x000A
+#define PCI_DEVICE_ID_ARTOP_ATP867B	0x000B
 #define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
 #define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
 #define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 225f733e7533..ce1be708ca16 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -193,6 +193,8 @@ void *rdev_get_drvdata(struct regulator_dev *rdev);
 struct device *rdev_get_dev(struct regulator_dev *rdev);
 int rdev_get_id(struct regulator_dev *rdev);
 
+int regulator_mode_to_status(unsigned int);
+
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
 
 #endif
diff --git a/include/linux/rxrpc.h b/include/linux/rxrpc.h
index f7b826b565c7..a53915cd5581 100644
--- a/include/linux/rxrpc.h
+++ b/include/linux/rxrpc.h
@@ -58,5 +58,12 @@ struct sockaddr_rxrpc {
 #define RXRPC_SECURITY_AUTH	1	/* authenticated packets */
 #define RXRPC_SECURITY_ENCRYPT	2	/* encrypted packets */
 
+/*
+ * RxRPC security indices
+ */
+#define RXRPC_SECURITY_NONE	0	/* no security protocol */
+#define RXRPC_SECURITY_RXKAD	2	/* kaserver or kerberos 4 */
+#define RXRPC_SECURITY_RXGK	4	/* gssapi-based */
+#define RXRPC_SECURITY_RXK5	5	/* kerberos 5 */
 
 #endif /* _LINUX_RXRPC_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index f3d74bd04d18..8af3d249170e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -190,6 +190,7 @@ extern unsigned long long time_sync_thresh;
 /* in tsk->state again */
 #define TASK_DEAD		64
 #define TASK_WAKEKILL		128
+#define TASK_WAKING		256
 
 /* Convenience macros for the sake of set_task_state */
 #define TASK_KILLABLE		(TASK_WAKEKILL | TASK_UNINTERRUPTIBLE)
@@ -802,14 +803,14 @@ enum cpu_idle_type {
 #define SD_BALANCE_NEWIDLE	0x0002	/* Balance when about to become idle */
 #define SD_BALANCE_EXEC		0x0004	/* Balance on exec */
 #define SD_BALANCE_FORK		0x0008	/* Balance on fork, clone */
-#define SD_WAKE_IDLE		0x0010	/* Wake to idle CPU on task wakeup */
+#define SD_BALANCE_WAKE		0x0010  /* Balance on wakeup */
 #define SD_WAKE_AFFINE		0x0020	/* Wake task to waking CPU */
-#define SD_WAKE_BALANCE		0x0040	/* Perform balancing at task wakeup */
+#define SD_PREFER_LOCAL		0x0040  /* Prefer to keep tasks local to this domain */
 #define SD_SHARE_CPUPOWER	0x0080	/* Domain members share cpu power */
 #define SD_POWERSAVINGS_BALANCE	0x0100	/* Balance for power savings */
 #define SD_SHARE_PKG_RESOURCES	0x0200	/* Domain members share cpu pkg resources */
 #define SD_SERIALIZE		0x0400	/* Only a single load balancing instance */
-#define SD_WAKE_IDLE_FAR	0x0800	/* Gain latency sacrificing cache hit */
+
 #define SD_PREFER_SIBLING	0x1000	/* Prefer to place tasks in a sibling domain */
 
 enum powersavings_balance_level {
@@ -991,6 +992,9 @@ static inline int test_sd_parent(struct sched_domain *sd, int flag)
 	return 0;
 }
 
+unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu);
+unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu);
+
 #else /* CONFIG_SMP */
 
 struct sched_domain_attr;
@@ -1002,6 +1006,7 @@ partition_sched_domains(int ndoms_new, struct cpumask *doms_new,
 }
 #endif	/* !CONFIG_SMP */
 
+
 struct io_context;			/* See blkdev.h */
 
 
@@ -1019,6 +1024,12 @@ struct uts_namespace;
 struct rq;
 struct sched_domain;
 
+/*
+ * wake flags
+ */
+#define WF_SYNC		0x01		/* waker goes to sleep after wakup */
+#define WF_FORK		0x02		/* child wakeup after fork */
+
 struct sched_class {
 	const struct sched_class *next;
 
@@ -1026,13 +1037,13 @@ struct sched_class {
 	void (*dequeue_task) (struct rq *rq, struct task_struct *p, int sleep);
 	void (*yield_task) (struct rq *rq);
 
-	void (*check_preempt_curr) (struct rq *rq, struct task_struct *p, int sync);
+	void (*check_preempt_curr) (struct rq *rq, struct task_struct *p, int flags);
 
 	struct task_struct * (*pick_next_task) (struct rq *rq);
 	void (*put_prev_task) (struct rq *rq, struct task_struct *p);
 
 #ifdef CONFIG_SMP
-	int  (*select_task_rq)(struct task_struct *p, int sync);
+	int  (*select_task_rq)(struct task_struct *p, int sd_flag, int flags);
 
 	unsigned long (*load_balance) (struct rq *this_rq, int this_cpu,
 			struct rq *busiest, unsigned long max_load_move,
@@ -1102,6 +1113,8 @@ struct sched_entity {
 	u64			start_runtime;
 	u64			avg_wakeup;
 
+	u64			avg_running;
+
 #ifdef CONFIG_SCHEDSTATS
 	u64			wait_start;
 	u64			wait_max;
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index eb1423a0078d..68e212ff9dde 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -85,7 +85,6 @@ struct intc_desc symbol __initdata = {					\
 }
 #endif
 
-unsigned int intc_evt2irq(unsigned int vector);
 void __init register_intc_controller(struct intc_desc *desc);
 int intc_set_priority(unsigned int irq, unsigned int prio);
 
diff --git a/include/linux/taskstats_kern.h b/include/linux/taskstats_kern.h
index 7e9680f4afdd..3398f4553269 100644
--- a/include/linux/taskstats_kern.h
+++ b/include/linux/taskstats_kern.h
@@ -9,7 +9,6 @@
 
 #include <linux/taskstats.h>
 #include <linux/sched.h>
-#include <net/genetlink.h>
 
 #ifdef CONFIG_TASKSTATS
 extern struct kmem_cache *taskstats_cache;
diff --git a/include/linux/time.h b/include/linux/time.h
index ea16c1a01d51..56787c093345 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -75,7 +75,7 @@ extern unsigned long mktime(const unsigned int year, const unsigned int mon,
 			    const unsigned int day, const unsigned int hour,
 			    const unsigned int min, const unsigned int sec);
 
-extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
+extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec);
 extern struct timespec timespec_add_safe(const struct timespec lhs,
 					 const struct timespec rhs);
 
@@ -101,7 +101,8 @@ extern struct timespec xtime;
 extern struct timespec wall_to_monotonic;
 extern seqlock_t xtime_lock;
 
-extern unsigned long read_persistent_clock(void);
+extern void read_persistent_clock(struct timespec *ts);
+extern void read_boot_clock(struct timespec *ts);
 extern int update_persistent_clock(struct timespec now);
 extern int no_sync_cmos_clock __read_mostly;
 void timekeeping_init(void);
@@ -109,6 +110,8 @@ extern int timekeeping_suspended;
 
 unsigned long get_seconds(void);
 struct timespec current_kernel_time(void);
+struct timespec __current_kernel_time(void); /* does not hold xtime_lock */
+struct timespec get_monotonic_coarse(void);
 
 #define CURRENT_TIME		(current_kernel_time())
 #define CURRENT_TIME_SEC	((struct timespec) { get_seconds(), 0 })
@@ -147,6 +150,7 @@ extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
 extern int timekeeping_valid_for_hres(void);
 extern void update_wall_time(void);
 extern void update_xtime_cache(u64 nsec);
+extern void timekeeping_leap_insert(int leapsecond);
 
 struct tms;
 extern void do_sys_times(struct tms *);
@@ -241,6 +245,8 @@ struct itimerval {
 #define CLOCK_PROCESS_CPUTIME_ID	2
 #define CLOCK_THREAD_CPUTIME_ID		3
 #define CLOCK_MONOTONIC_RAW		4
+#define CLOCK_REALTIME_COARSE		5
+#define CLOCK_MONOTONIC_COARSE		6
 
 /*
  * The IDs of various hardware clocks:
diff --git a/include/linux/timer.h b/include/linux/timer.h
index be62ec2ebea5..a2d1eb6cb3f0 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -175,11 +175,6 @@ extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires);
 
 /*
  * Return when the next timer-wheel timeout occurs (in absolute jiffies),
- * locks the timer base:
- */
-extern unsigned long next_timer_interrupt(void);
-/*
- * Return when the next timer-wheel timeout occurs (in absolute jiffies),
  * locks the timer base and does the comparison against the given
  * jiffie.
  */
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 85e8cf7d393c..809b26c07090 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -95,14 +95,12 @@ int arch_update_cpu_topology(void);
 				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
-				| 0*SD_WAKE_IDLE			\
+				| 0*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
-				| 1*SD_WAKE_BALANCE			\
 				| 1*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
-				| 0*SD_WAKE_IDLE_FAR			\
 				| 0*SD_PREFER_SIBLING			\
 				,					\
 	.last_balance		= jiffies,				\
@@ -122,20 +120,19 @@ int arch_update_cpu_topology(void);
 	.imbalance_pct		= 125,					\
 	.cache_nice_tries	= 1,					\
 	.busy_idx		= 2,					\
-	.wake_idx		= 1,					\
-	.forkexec_idx		= 1,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
 				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
-				| 1*SD_WAKE_IDLE			\
+				| 0*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
-				| 1*SD_WAKE_BALANCE			\
+				| 1*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 1*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
-				| 0*SD_WAKE_IDLE_FAR			\
 				| sd_balance_for_mc_power()		\
 				| sd_power_saving_flags()		\
 				,					\
@@ -155,21 +152,20 @@ int arch_update_cpu_topology(void);
 	.cache_nice_tries	= 1,					\
 	.busy_idx		= 2,					\
 	.idle_idx		= 1,					\
-	.newidle_idx		= 2,					\
-	.wake_idx		= 1,					\
-	.forkexec_idx		= 1,					\
+	.newidle_idx		= 0,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
 				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
-				| 1*SD_WAKE_IDLE			\
-				| 0*SD_WAKE_AFFINE			\
-				| 1*SD_WAKE_BALANCE			\
+				| 0*SD_BALANCE_WAKE			\
+				| 1*SD_WAKE_AFFINE			\
+				| 1*SD_PREFER_LOCAL			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
-				| 0*SD_WAKE_IDLE_FAR			\
 				| sd_balance_for_package_power()	\
 				| sd_power_saving_flags()		\
 				,					\
@@ -191,14 +187,12 @@ int arch_update_cpu_topology(void);
 				| 1*SD_BALANCE_NEWIDLE			\
 				| 0*SD_BALANCE_EXEC			\
 				| 0*SD_BALANCE_FORK			\
-				| 0*SD_WAKE_IDLE			\
-				| 1*SD_WAKE_AFFINE			\
-				| 0*SD_WAKE_BALANCE			\
+				| 0*SD_BALANCE_WAKE			\
+				| 0*SD_WAKE_AFFINE			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 1*SD_SERIALIZE			\
-				| 1*SD_WAKE_IDLE_FAR			\
 				| 0*SD_PREFER_SIBLING			\
 				,					\
 	.last_balance		= jiffies,				\
diff --git a/include/linux/usb/m66592.h b/include/linux/usb/m66592.h
new file mode 100644
index 000000000000..cda9625e7df0
--- /dev/null
+++ b/include/linux/usb/m66592.h
@@ -0,0 +1,44 @@
+/*
+ * M66592 driver platform data
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __LINUX_USB_M66592_H
+#define __LINUX_USB_M66592_H
+
+#define M66592_PLATDATA_XTAL_12MHZ	0x01
+#define M66592_PLATDATA_XTAL_24MHZ	0x02
+#define M66592_PLATDATA_XTAL_48MHZ	0x03
+
+struct m66592_platdata {
+	/* one = on chip controller, zero = external controller */
+	unsigned	on_chip:1;
+
+	/* one = big endian, zero = little endian */
+	unsigned	endian:1;
+
+	/* (external controller only) M66592_PLATDATA_XTAL_nnMHZ */
+	unsigned	xtal:2;
+
+	/* (external controller only) one = 3.3V, zero = 1.5V */
+	unsigned	vif:1;
+
+};
+
+#endif /* __LINUX_USB_M66592_H */
+
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
index e9f0384fa20c..26d216734057 100644
--- a/include/linux/usb/r8a66597.h
+++ b/include/linux/usb/r8a66597.h
@@ -28,9 +28,12 @@
 #define R8A66597_PLATDATA_XTAL_48MHZ	0x03
 
 struct r8a66597_platdata {
-	/* This ops can controll port power instead of DVSTCTR register. */
+	/* This callback can control port power instead of DVSTCTR register. */
 	void (*port_power)(int port, int power);
 
+	/* set one = on chip controller, set zero = external controller */
+	unsigned	on_chip:1;
+
 	/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
 	unsigned	xtal:2;
 
@@ -40,5 +43,373 @@ struct r8a66597_platdata {
 	/* set one = big endian, set zero = little endian */
 	unsigned	endian:1;
 };
-#endif
+
+/* Register definitions */
+#define SYSCFG0		0x00
+#define SYSCFG1		0x02
+#define SYSSTS0		0x04
+#define SYSSTS1		0x06
+#define DVSTCTR0	0x08
+#define DVSTCTR1	0x0A
+#define TESTMODE	0x0C
+#define PINCFG		0x0E
+#define DMA0CFG		0x10
+#define DMA1CFG		0x12
+#define CFIFO		0x14
+#define D0FIFO		0x18
+#define D1FIFO		0x1C
+#define CFIFOSEL	0x20
+#define CFIFOCTR	0x22
+#define CFIFOSIE	0x24
+#define D0FIFOSEL	0x28
+#define D0FIFOCTR	0x2A
+#define D1FIFOSEL	0x2C
+#define D1FIFOCTR	0x2E
+#define INTENB0		0x30
+#define INTENB1		0x32
+#define INTENB2		0x34
+#define BRDYENB		0x36
+#define NRDYENB		0x38
+#define BEMPENB		0x3A
+#define SOFCFG		0x3C
+#define INTSTS0		0x40
+#define INTSTS1		0x42
+#define INTSTS2		0x44
+#define BRDYSTS		0x46
+#define NRDYSTS		0x48
+#define BEMPSTS		0x4A
+#define FRMNUM		0x4C
+#define UFRMNUM		0x4E
+#define USBADDR		0x50
+#define USBREQ		0x54
+#define USBVAL		0x56
+#define USBINDX		0x58
+#define USBLENG		0x5A
+#define DCPCFG		0x5C
+#define DCPMAXP		0x5E
+#define DCPCTR		0x60
+#define PIPESEL		0x64
+#define PIPECFG		0x68
+#define PIPEBUF		0x6A
+#define PIPEMAXP	0x6C
+#define PIPEPERI	0x6E
+#define PIPE1CTR	0x70
+#define PIPE2CTR	0x72
+#define PIPE3CTR	0x74
+#define PIPE4CTR	0x76
+#define PIPE5CTR	0x78
+#define PIPE6CTR	0x7A
+#define PIPE7CTR	0x7C
+#define PIPE8CTR	0x7E
+#define PIPE9CTR	0x80
+#define PIPE1TRE	0x90
+#define PIPE1TRN	0x92
+#define PIPE2TRE	0x94
+#define PIPE2TRN	0x96
+#define PIPE3TRE	0x98
+#define PIPE3TRN	0x9A
+#define PIPE4TRE	0x9C
+#define	PIPE4TRN	0x9E
+#define	PIPE5TRE	0xA0
+#define	PIPE5TRN	0xA2
+#define DEVADD0		0xD0
+#define DEVADD1		0xD2
+#define DEVADD2		0xD4
+#define DEVADD3		0xD6
+#define DEVADD4		0xD8
+#define DEVADD5		0xDA
+#define DEVADD6		0xDC
+#define DEVADD7		0xDE
+#define DEVADD8		0xE0
+#define DEVADD9		0xE2
+#define DEVADDA		0xE4
+
+/* System Configuration Control Register */
+#define	XTAL		0xC000	/* b15-14: Crystal selection */
+#define	  XTAL48	 0x8000	  /* 48MHz */
+#define	  XTAL24	 0x4000	  /* 24MHz */
+#define	  XTAL12	 0x0000	  /* 12MHz */
+#define	XCKE		0x2000	/* b13: External clock enable */
+#define	PLLC		0x0800	/* b11: PLL control */
+#define	SCKE		0x0400	/* b10: USB clock enable */
+#define	PCSDIS		0x0200	/* b9: not CS wakeup */
+#define	LPSME		0x0100	/* b8: Low power sleep mode */
+#define	HSE		0x0080	/* b7: Hi-speed enable */
+#define	DCFM		0x0040	/* b6: Controller function select  */
+#define	DRPD		0x0020	/* b5: D+/- pull down control */
+#define	DPRPU		0x0010	/* b4: D+ pull up control */
+#define	USBE		0x0001	/* b0: USB module operation enable */
+
+/* System Configuration Status Register */
+#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
+#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
+#define	SOFEA		0x0020	/* b5: SOF monitor */
+#define	IDMON		0x0004	/* b3: ID-pin monitor */
+#define	LNST		0x0003	/* b1-0: D+, D- line status */
+#define	  SE1		 0x0003	  /* SE1 */
+#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
+#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
+#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
+#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
+#define	  SE0		 0x0000	  /* SE0 */
+
+/* Device State Control Register */
+#define	EXTLP0		0x0400	/* b10: External port */
+#define	VBOUT		0x0200	/* b9: VBUS output */
+#define	WKUP		0x0100	/* b8: Remote wakeup */
+#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
+#define	USBRST		0x0040	/* b6: USB reset enable */
+#define	RESUME		0x0020	/* b5: Resume enable */
+#define	UACT		0x0010	/* b4: USB bus enable */
+#define	RHST		0x0007	/* b1-0: Reset handshake status */
+#define	  HSPROC	 0x0004	  /* HS handshake is processing */
+#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
+#define	  FSMODE	 0x0002	  /* Full-Speed mode */
+#define	  LSMODE	 0x0001	  /* Low-Speed mode */
+#define	  UNDECID	 0x0000	  /* Undecided */
+
+/* Test Mode Register */
+#define	UTST			0x000F	/* b3-0: Test select */
+#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
+#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
+#define	  H_TST_K		 0x000A	  /* HOST TEST K */
+#define	  H_TST_J		 0x0009	  /* HOST TEST J */
+#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
+#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
+#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
+#define	  P_TST_K		 0x0002	  /* PERI TEST K */
+#define	  P_TST_J		 0x0001	  /* PERI TEST J */
+#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
+
+/* Data Pin Configuration Register */
+#define	LDRV			0x8000	/* b15: Drive Current Adjust */
+#define	  VIF1			  0x0000		/* VIF = 1.8V */
+#define	  VIF3			  0x8000		/* VIF = 3.3V */
+#define	INTA			0x0001	/* b1: USB INT-pin active */
+
+/* DMAx Pin Configuration Register */
+#define	DREQA			0x4000	/* b14: Dreq active select */
+#define	BURST			0x2000	/* b13: Burst mode */
+#define	DACKA			0x0400	/* b10: Dack active select */
+#define	DFORM			0x0380	/* b9-7: DMA mode select */
+#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
+#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
+#define	DENDA			0x0040	/* b6: Dend active select */
+#define	PKTM			0x0020	/* b5: Packet mode */
+#define	DENDE			0x0010	/* b4: Dend enable */
+#define	OBUS			0x0004	/* b2: OUTbus mode */
+
+/* CFIFO/DxFIFO Port Select Register */
+#define	RCNT		0x8000	/* b15: Read count mode */
+#define	REW		0x4000	/* b14: Buffer rewind */
+#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
+#define	DREQE		0x1000	/* b12: DREQ output enable */
+#define	  MBW_8		 0x0000	  /*  8bit */
+#define	  MBW_16	 0x0400	  /* 16bit */
+#define	  MBW_32	 0x0800   /* 32bit */
+#define	BIGEND		0x0100	/* b8: Big endian mode */
+#define	  BYTE_LITTLE	 0x0000		/* little dendian */
+#define	  BYTE_BIG	 0x0100		/* big endifan */
+#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
+#define	CURPIPE		0x000F	/* b2-0: PIPE select */
+
+/* CFIFO/DxFIFO Port Control Register */
+#define	BVAL		0x8000	/* b15: Buffer valid flag */
+#define	BCLR		0x4000	/* b14: Buffer clear */
+#define	FRDY		0x2000	/* b13: FIFO ready */
+#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
+
+/* Interrupt Enable Register 0 */
+#define	VBSE	0x8000	/* b15: VBUS interrupt */
+#define	RSME	0x4000	/* b14: Resume interrupt */
+#define	SOFE	0x2000	/* b13: Frame update interrupt */
+#define	DVSE	0x1000	/* b12: Device state transition interrupt */
+#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
+
+/* Interrupt Enable Register 1 */
+#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
+#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
+#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
+#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
+#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
+
+/* BRDY Interrupt Enable/Status Register */
+#define	BRDY9		0x0200	/* b9: PIPE9 */
+#define	BRDY8		0x0100	/* b8: PIPE8 */
+#define	BRDY7		0x0080	/* b7: PIPE7 */
+#define	BRDY6		0x0040	/* b6: PIPE6 */
+#define	BRDY5		0x0020	/* b5: PIPE5 */
+#define	BRDY4		0x0010	/* b4: PIPE4 */
+#define	BRDY3		0x0008	/* b3: PIPE3 */
+#define	BRDY2		0x0004	/* b2: PIPE2 */
+#define	BRDY1		0x0002	/* b1: PIPE1 */
+#define	BRDY0		0x0001	/* b1: PIPE0 */
+
+/* NRDY Interrupt Enable/Status Register */
+#define	NRDY9		0x0200	/* b9: PIPE9 */
+#define	NRDY8		0x0100	/* b8: PIPE8 */
+#define	NRDY7		0x0080	/* b7: PIPE7 */
+#define	NRDY6		0x0040	/* b6: PIPE6 */
+#define	NRDY5		0x0020	/* b5: PIPE5 */
+#define	NRDY4		0x0010	/* b4: PIPE4 */
+#define	NRDY3		0x0008	/* b3: PIPE3 */
+#define	NRDY2		0x0004	/* b2: PIPE2 */
+#define	NRDY1		0x0002	/* b1: PIPE1 */
+#define	NRDY0		0x0001	/* b1: PIPE0 */
+
+/* BEMP Interrupt Enable/Status Register */
+#define	BEMP9		0x0200	/* b9: PIPE9 */
+#define	BEMP8		0x0100	/* b8: PIPE8 */
+#define	BEMP7		0x0080	/* b7: PIPE7 */
+#define	BEMP6		0x0040	/* b6: PIPE6 */
+#define	BEMP5		0x0020	/* b5: PIPE5 */
+#define	BEMP4		0x0010	/* b4: PIPE4 */
+#define	BEMP3		0x0008	/* b3: PIPE3 */
+#define	BEMP2		0x0004	/* b2: PIPE2 */
+#define	BEMP1		0x0002	/* b1: PIPE1 */
+#define	BEMP0		0x0001	/* b0: PIPE0 */
+
+/* SOF Pin Configuration Register */
+#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
+#define	BRDYM		0x0040	/* b6: BRDY clear timing */
+#define	INTL		0x0020	/* b5: Interrupt sense select */
+#define	EDGESTS		0x0010	/* b4:  */
+#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
+#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
+#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
+#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
+
+/* Interrupt Status Register 0 */
+#define	VBINT	0x8000	/* b15: VBUS interrupt */
+#define	RESM	0x4000	/* b14: Resume interrupt */
+#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
+#define	DVST	0x1000	/* b12: Device state transition interrupt */
+#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
+#define	VBSTS	0x0080	/* b7: VBUS input port */
+#define	DVSQ	0x0070	/* b6-4: Device state */
+#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
+#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
+#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
+#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
+#define	  DS_SUSP	 0x0040	  /* Suspend */
+#define	  DS_CNFG	 0x0030	  /* Configured */
+#define	  DS_ADDS	 0x0020	  /* Address */
+#define	  DS_DFLT	 0x0010	  /* Default */
+#define	  DS_POWR	 0x0000	  /* Powered */
+#define	DVSQS		0x0030	/* b5-4: Device state */
+#define	VALID		0x0008	/* b3: Setup packet detected flag */
+#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
+#define	  CS_SQER	 0x0006	  /* Sequence error */
+#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
+#define	  CS_WRSS	 0x0004	  /* Control write status stage */
+#define	  CS_WRDS	 0x0003	  /* Control write data stage */
+#define	  CS_RDSS	 0x0002	  /* Control read status stage */
+#define	  CS_RDDS	 0x0001	  /* Control read data stage */
+#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
+
+/* Interrupt Status Register 1 */
+#define	OVRCR		0x8000	/* b15: Over-current interrupt */
+#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
+#define	DTCH		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
+#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
+#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
+
+/* Frame Number Register */
+#define	OVRN		0x8000	/* b15: Overrun error */
+#define	CRCE		0x4000	/* b14: Received data error */
+#define	FRNM		0x07FF	/* b10-0: Frame number */
+
+/* Micro Frame Number Register */
+#define	UFRNM		0x0007	/* b2-0: Micro frame number */
+
+/* Default Control Pipe Maxpacket Size Register */
+/* Pipe Maxpacket Size Register */
+#define	DEVSEL	0xF000	/* b15-14: Device address select */
+#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
+
+/* Default Control Pipe Control Register */
+#define	BSTS		0x8000	/* b15: Buffer status */
+#define	SUREQ		0x4000	/* b14: Send USB request  */
+#define	CSCLR		0x2000	/* b13: complete-split status clear */
+#define	CSSTS		0x1000	/* b12: complete-split status */
+#define	SUREQCLR	0x0800	/* b11: stop setup request */
+#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY		0x0020	/* b5: pipe busy */
+#define	PINGE		0x0010	/* b4: ping enable */
+#define	CCPL		0x0004	/* b2: Enable control transfer complete */
+#define	PID		0x0003	/* b1-0: Response PID */
+#define	  PID_STALL11	 0x0003	  /* STALL */
+#define	  PID_STALL	 0x0002	  /* STALL */
+#define	  PID_BUF	 0x0001	  /* BUF */
+#define	  PID_NAK	 0x0000	  /* NAK */
+
+/* Pipe Window Select Register */
+#define	PIPENM		0x0007	/* b2-0: Pipe select */
+
+/* Pipe Configuration Register */
+#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
+#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
+#define	  R8A66597_INT	 0x8000		  /* Interrupt */
+#define	  R8A66597_BULK	 0x4000		  /* Bulk */
+#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
+#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
+#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
+#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
+#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
+#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
+
+/* Pipe Buffer Configuration Register */
+#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
+#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
+#define	PIPE0BUF	256
+#define	PIPExBUF	64
+
+/* Pipe Maxpacket Size Register */
+#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
+
+/* Pipe Cycle Configuration Register */
+#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
+#define	IITV	0x0007	/* b2-0: Isochronous interval */
+
+/* Pipex Control Register */
+#define	BSTS	0x8000	/* b15: Buffer status */
+#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define	CSCLR	0x2000	/* b13: complete-split status clear */
+#define	CSSTS	0x1000	/* b12: complete-split status */
+#define	ATREPM	0x0400	/* b10: Auto repeat mode */
+#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
+#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY	0x0020	/* b5: pipe busy */
+#define	PID	0x0003	/* b1-0: Response PID */
+
+/* PIPExTRE */
+#define	TRENB		0x0200	/* b9: Transaction counter enable */
+#define	TRCLR		0x0100	/* b8: Transaction counter clear */
+
+/* PIPExTRN */
+#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
+
+/* DEVADDx */
+#define	UPPHUB		0x7800
+#define	HUBPORT		0x0700
+#define	USBSPD		0x00C0
+#define	RTPORT		0x0001
+
+#endif /* __LINUX_USB_R8A66597_H */
 
diff --git a/include/linux/uwb.h b/include/linux/uwb.h
index c02128991ff7..7fc9746f22cd 100644
--- a/include/linux/uwb.h
+++ b/include/linux/uwb.h
@@ -597,7 +597,7 @@ void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t);
 void uwb_rc_neh_error(struct uwb_rc *, int);
 void uwb_rc_reset_all(struct uwb_rc *rc);
 void uwb_rc_pre_reset(struct uwb_rc *rc);
-void uwb_rc_post_reset(struct uwb_rc *rc);
+int uwb_rc_post_reset(struct uwb_rc *rc);
 
 /**
  * uwb_rsv_is_owner - is the owner of this reservation the RC?
diff --git a/include/linux/wait.h b/include/linux/wait.h
index cf3c2f5dba51..a48e16b77d5e 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -26,8 +26,8 @@
 #include <asm/current.h>
 
 typedef struct __wait_queue wait_queue_t;
-typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int sync, void *key);
-int default_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
+int default_wake_function(wait_queue_t *wait, unsigned mode, int flags, void *key);
 
 struct __wait_queue {
 	unsigned int flags;
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 7b55ab215a64..0f7c37825fc1 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -143,6 +143,8 @@ extern int __ipv6_dev_mc_dec(struct inet6_dev *idev, const struct in6_addr *addr
 extern int ipv6_dev_mc_dec(struct net_device *dev, const struct in6_addr *addr);
 extern void ipv6_mc_up(struct inet6_dev *idev);
 extern void ipv6_mc_down(struct inet6_dev *idev);
+extern void ipv6_mc_unmap(struct inet6_dev *idev);
+extern void ipv6_mc_remap(struct inet6_dev *idev);
 extern void ipv6_mc_init_dev(struct inet6_dev *idev);
 extern void ipv6_mc_destroy_dev(struct inet6_dev *idev);
 extern void addrconf_dad_failure(struct inet6_ifaddr *ifp);
diff --git a/include/net/protocol.h b/include/net/protocol.h
index 1089d5aabd49..60249e51b669 100644
--- a/include/net/protocol.h
+++ b/include/net/protocol.h
@@ -94,21 +94,20 @@ struct inet_protosw {
 #define INET_PROTOSW_PERMANENT 0x02  /* Permanent protocols are unremovable. */
 #define INET_PROTOSW_ICSK      0x04  /* Is this an inet_connection_sock? */
 
-extern struct net_protocol *inet_protocol_base;
-extern struct net_protocol *inet_protos[MAX_INET_PROTOS];
+extern const struct net_protocol *inet_protos[MAX_INET_PROTOS];
 
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-extern struct inet6_protocol *inet6_protos[MAX_INET_PROTOS];
+extern const struct inet6_protocol *inet6_protos[MAX_INET_PROTOS];
 #endif
 
-extern int	inet_add_protocol(struct net_protocol *prot, unsigned char num);
-extern int	inet_del_protocol(struct net_protocol *prot, unsigned char num);
+extern int	inet_add_protocol(const struct net_protocol *prot, unsigned char num);
+extern int	inet_del_protocol(const struct net_protocol *prot, unsigned char num);
 extern void	inet_register_protosw(struct inet_protosw *p);
 extern void	inet_unregister_protosw(struct inet_protosw *p);
 
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-extern int	inet6_add_protocol(struct inet6_protocol *prot, unsigned char num);
-extern int	inet6_del_protocol(struct inet6_protocol *prot, unsigned char num);
+extern int	inet6_add_protocol(const struct inet6_protocol *prot, unsigned char num);
+extern int	inet6_del_protocol(const struct inet6_protocol *prot, unsigned char num);
 extern int	inet6_register_protosw(struct inet_protosw *p);
 extern void	inet6_unregister_protosw(struct inet_protosw *p);
 #endif
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 88eb9de095de..c33180dd42b4 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -81,7 +81,7 @@ struct Qdisc
 struct Qdisc_class_ops
 {
 	/* Child qdisc manipulation */
-	unsigned int		(*select_queue)(struct Qdisc *, struct tcmsg *);
+	struct netdev_queue *	(*select_queue)(struct Qdisc *, struct tcmsg *);
 	int			(*graft)(struct Qdisc *, unsigned long cl,
 					struct Qdisc *, struct Qdisc **);
 	struct Qdisc *		(*leaf)(struct Qdisc *, unsigned long cl);
diff --git a/include/net/tcp.h b/include/net/tcp.h
index b71a446d58f6..56b76027b85e 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -793,6 +793,13 @@ static inline unsigned int tcp_packets_in_flight(const struct tcp_sock *tp)
 	return tp->packets_out - tcp_left_out(tp) + tp->retrans_out;
 }
 
+#define TCP_INFINITE_SSTHRESH	0x7fffffff
+
+static inline bool tcp_in_initial_slowstart(const struct tcp_sock *tp)
+{
+	return tp->snd_ssthresh >= TCP_INFINITE_SSTHRESH;
+}
+
 /* If cwnd > ssthresh, we may raise ssthresh to be half-way to cwnd.
  * The exception is rate halving phase, when cwnd is decreasing towards
  * ssthresh.
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index 9a74b468a229..d86af94691c2 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -171,6 +171,7 @@ TRACE_EVENT(block_rq_complete,
 		  (unsigned long long)__entry->sector,
 		  __entry->nr_sector, __entry->errors)
 );
+
 TRACE_EVENT(block_bio_bounce,
 
 	TP_PROTO(struct request_queue *q, struct bio *bio),
@@ -186,7 +187,8 @@ TRACE_EVENT(block_bio_bounce,
 	),
 
 	TP_fast_assign(
-		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->dev		= bio->bi_bdev ?
+					  bio->bi_bdev->bd_dev : 0;
 		__entry->sector		= bio->bi_sector;
 		__entry->nr_sector	= bio->bi_size >> 9;
 		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index 1cb0c3aa11e6..b89f9db4a404 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -8,16 +8,17 @@
 #include <linux/interrupt.h>
 
 #define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq }
-#define show_softirq_name(val)			\
-	__print_symbolic(val,			\
-			 softirq_name(HI),	\
-			 softirq_name(TIMER),	\
-			 softirq_name(NET_TX),	\
-			 softirq_name(NET_RX),	\
-			 softirq_name(BLOCK),	\
-			 softirq_name(TASKLET),	\
-			 softirq_name(SCHED),	\
-			 softirq_name(HRTIMER),	\
+#define show_softirq_name(val)				\
+	__print_symbolic(val,				\
+			 softirq_name(HI),		\
+			 softirq_name(TIMER),		\
+			 softirq_name(NET_TX),		\
+			 softirq_name(NET_RX),		\
+			 softirq_name(BLOCK),		\
+			 softirq_name(BLOCK_IOPOLL),	\
+			 softirq_name(TASKLET),		\
+			 softirq_name(SCHED),		\
+			 softirq_name(HRTIMER),		\
 			 softirq_name(RCU))
 
 /**
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 308bafd93325..72a3b437b829 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -239,9 +239,9 @@ ftrace_format_##call(struct ftrace_event_call *unused,			\
 #undef __print_flags
 #define __print_flags(flag, delim, flag_array...)			\
 	({								\
-		static const struct trace_print_flags flags[] =		\
+		static const struct trace_print_flags __flags[] =	\
 			{ flag_array, { -1, NULL }};			\
-		ftrace_print_flags_seq(p, delim, flag, flags);		\
+		ftrace_print_flags_seq(p, delim, flag, __flags);	\
 	})
 
 #undef __print_symbolic
@@ -254,7 +254,7 @@ ftrace_format_##call(struct ftrace_event_call *unused,			\
 
 #undef TRACE_EVENT
 #define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
-enum print_line_t							\
+static enum print_line_t						\
 ftrace_raw_output_##call(struct trace_iterator *iter, int flags)	\
 {									\
 	struct trace_seq *s = &iter->seq;				\
@@ -317,7 +317,7 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags)	\
 
 #undef TRACE_EVENT
 #define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
-int									\
+static int								\
 ftrace_define_fields_##call(struct ftrace_event_call *event_call)	\
 {									\
 	struct ftrace_raw_##call field;					\
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index abb6e17505e2..ead9b610aa71 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -15,6 +15,7 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/taskstats.h>
 #include <linux/time.h>
 #include <linux/sysctl.h>
 #include <linux/delayacct.h>
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 05071bf6a37b..c03f221fee44 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -48,37 +48,6 @@
 
 #include <asm/uaccess.h>
 
-/**
- * ktime_get - get the monotonic time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t ktime_get(void)
-{
-	struct timespec now;
-
-	ktime_get_ts(&now);
-
-	return timespec_to_ktime(now);
-}
-EXPORT_SYMBOL_GPL(ktime_get);
-
-/**
- * ktime_get_real - get the real (wall-) time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t ktime_get_real(void)
-{
-	struct timespec now;
-
-	getnstimeofday(&now);
-
-	return timespec_to_ktime(now);
-}
-
-EXPORT_SYMBOL_GPL(ktime_get_real);
-
 /*
  * The timer bases:
  *
@@ -106,31 +75,6 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
 	}
 };
 
-/**
- * ktime_get_ts - get the monotonic clock in timespec format
- * @ts:		pointer to timespec variable
- *
- * The function calculates the monotonic clock from the realtime
- * clock and the wall_to_monotonic offset and stores the result
- * in normalized timespec format in the variable pointed to by @ts.
- */
-void ktime_get_ts(struct timespec *ts)
-{
-	struct timespec tomono;
-	unsigned long seq;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		getnstimeofday(ts);
-		tomono = wall_to_monotonic;
-
-	} while (read_seqretry(&xtime_lock, seq));
-
-	set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
-				ts->tv_nsec + tomono.tv_nsec);
-}
-EXPORT_SYMBOL_GPL(ktime_get_ts);
-
 /*
  * Get the coarse grained time at the softirq based on xtime and
  * wall_to_monotonic.
@@ -1155,7 +1099,6 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
 		clock_id = CLOCK_MONOTONIC;
 
 	timer->base = &cpu_base->clock_base[clock_id];
-	INIT_LIST_HEAD(&timer->cb_entry);
 	hrtimer_init_timer_hres(timer);
 
 #ifdef CONFIG_TIMER_STATS
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index d089d052c4a9..495440779ce3 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -242,6 +242,25 @@ static int posix_get_monotonic_raw(clockid_t which_clock, struct timespec *tp)
 	return 0;
 }
 
+
+static int posix_get_realtime_coarse(clockid_t which_clock, struct timespec *tp)
+{
+	*tp = current_kernel_time();
+	return 0;
+}
+
+static int posix_get_monotonic_coarse(clockid_t which_clock,
+						struct timespec *tp)
+{
+	*tp = get_monotonic_coarse();
+	return 0;
+}
+
+int posix_get_coarse_res(const clockid_t which_clock, struct timespec *tp)
+{
+	*tp = ktime_to_timespec(KTIME_LOW_RES);
+	return 0;
+}
 /*
  * Initialize everything, well, just everything in Posix clocks/timers ;)
  */
@@ -262,10 +281,26 @@ static __init int init_posix_timers(void)
 		.timer_create = no_timer_create,
 		.nsleep = no_nsleep,
 	};
+	struct k_clock clock_realtime_coarse = {
+		.clock_getres = posix_get_coarse_res,
+		.clock_get = posix_get_realtime_coarse,
+		.clock_set = do_posix_clock_nosettime,
+		.timer_create = no_timer_create,
+		.nsleep = no_nsleep,
+	};
+	struct k_clock clock_monotonic_coarse = {
+		.clock_getres = posix_get_coarse_res,
+		.clock_get = posix_get_monotonic_coarse,
+		.clock_set = do_posix_clock_nosettime,
+		.timer_create = no_timer_create,
+		.nsleep = no_nsleep,
+	};
 
 	register_posix_clock(CLOCK_REALTIME, &clock_realtime);
 	register_posix_clock(CLOCK_MONOTONIC, &clock_monotonic);
 	register_posix_clock(CLOCK_MONOTONIC_RAW, &clock_monotonic_raw);
+	register_posix_clock(CLOCK_REALTIME_COARSE, &clock_realtime_coarse);
+	register_posix_clock(CLOCK_MONOTONIC_COARSE, &clock_monotonic_coarse);
 
 	posix_timers_cache = kmem_cache_create("posix_timers_cache",
 					sizeof (struct k_itimer), 0, SLAB_PANIC,
diff --git a/kernel/sched.c b/kernel/sched.c
index d9db3fb17573..faf4d463bbff 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -119,8 +119,6 @@
  */
 #define RUNTIME_INF	((u64)~0ULL)
 
-static void double_rq_lock(struct rq *rq1, struct rq *rq2);
-
 static inline int rt_policy(int policy)
 {
 	if (unlikely(policy == SCHED_FIFO || policy == SCHED_RR))
@@ -378,13 +376,6 @@ static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
 
 #else
 
-#ifdef CONFIG_SMP
-static int root_task_group_empty(void)
-{
-	return 1;
-}
-#endif
-
 static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
 static inline struct task_group *task_group(struct task_struct *p)
 {
@@ -514,14 +505,6 @@ struct root_domain {
 #ifdef CONFIG_SMP
 	struct cpupri cpupri;
 #endif
-#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
-	/*
-	 * Preferred wake up cpu nominated by sched_mc balance that will be
-	 * used when most cpus are idle in the system indicating overall very
-	 * low system utilisation. Triggered at POWERSAVINGS_BALANCE_WAKEUP(2)
-	 */
-	unsigned int sched_mc_preferred_wakeup_cpu;
-#endif
 };
 
 /*
@@ -646,9 +629,10 @@ struct rq {
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
 
-static inline void check_preempt_curr(struct rq *rq, struct task_struct *p, int sync)
+static inline
+void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
 {
-	rq->curr->sched_class->check_preempt_curr(rq, p, sync);
+	rq->curr->sched_class->check_preempt_curr(rq, p, flags);
 }
 
 static inline int cpu_of(struct rq *rq)
@@ -1509,8 +1493,65 @@ static int tg_nop(struct task_group *tg, void *data)
 #endif
 
 #ifdef CONFIG_SMP
-static unsigned long source_load(int cpu, int type);
-static unsigned long target_load(int cpu, int type);
+/* Used instead of source_load when we know the type == 0 */
+static unsigned long weighted_cpuload(const int cpu)
+{
+	return cpu_rq(cpu)->load.weight;
+}
+
+/*
+ * Return a low guess at the load of a migration-source cpu weighted
+ * according to the scheduling class and "nice" value.
+ *
+ * We want to under-estimate the load of migration sources, to
+ * balance conservatively.
+ */
+static unsigned long source_load(int cpu, int type)
+{
+	struct rq *rq = cpu_rq(cpu);
+	unsigned long total = weighted_cpuload(cpu);
+
+	if (type == 0 || !sched_feat(LB_BIAS))
+		return total;
+
+	return min(rq->cpu_load[type-1], total);
+}
+
+/*
+ * Return a high guess at the load of a migration-target cpu weighted
+ * according to the scheduling class and "nice" value.
+ */
+static unsigned long target_load(int cpu, int type)
+{
+	struct rq *rq = cpu_rq(cpu);
+	unsigned long total = weighted_cpuload(cpu);
+
+	if (type == 0 || !sched_feat(LB_BIAS))
+		return total;
+
+	return max(rq->cpu_load[type-1], total);
+}
+
+static struct sched_group *group_of(int cpu)
+{
+	struct sched_domain *sd = rcu_dereference(cpu_rq(cpu)->sd);
+
+	if (!sd)
+		return NULL;
+
+	return sd->groups;
+}
+
+static unsigned long power_of(int cpu)
+{
+	struct sched_group *group = group_of(cpu);
+
+	if (!group)
+		return SCHED_LOAD_SCALE;
+
+	return group->cpu_power;
+}
+
 static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
 
 static unsigned long cpu_avg_load_per_task(int cpu)
@@ -1695,6 +1736,8 @@ static inline void update_shares_locked(struct rq *rq, struct sched_domain *sd)
 
 #ifdef CONFIG_PREEMPT
 
+static void double_rq_lock(struct rq *rq1, struct rq *rq2);
+
 /*
  * fair double_lock_balance: Safely acquires both rq->locks in a fair
  * way at the expense of forcing extra atomic operations in all
@@ -1959,13 +2002,6 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p,
 }
 
 #ifdef CONFIG_SMP
-
-/* Used instead of source_load when we know the type == 0 */
-static unsigned long weighted_cpuload(const int cpu)
-{
-	return cpu_rq(cpu)->load.weight;
-}
-
 /*
  * Is this task likely cache-hot:
  */
@@ -2239,185 +2275,6 @@ void kick_process(struct task_struct *p)
 	preempt_enable();
 }
 EXPORT_SYMBOL_GPL(kick_process);
-
-/*
- * Return a low guess at the load of a migration-source cpu weighted
- * according to the scheduling class and "nice" value.
- *
- * We want to under-estimate the load of migration sources, to
- * balance conservatively.
- */
-static unsigned long source_load(int cpu, int type)
-{
-	struct rq *rq = cpu_rq(cpu);
-	unsigned long total = weighted_cpuload(cpu);
-
-	if (type == 0 || !sched_feat(LB_BIAS))
-		return total;
-
-	return min(rq->cpu_load[type-1], total);
-}
-
-/*
- * Return a high guess at the load of a migration-target cpu weighted
- * according to the scheduling class and "nice" value.
- */
-static unsigned long target_load(int cpu, int type)
-{
-	struct rq *rq = cpu_rq(cpu);
-	unsigned long total = weighted_cpuload(cpu);
-
-	if (type == 0 || !sched_feat(LB_BIAS))
-		return total;
-
-	return max(rq->cpu_load[type-1], total);
-}
-
-/*
- * find_idlest_group finds and returns the least busy CPU group within the
- * domain.
- */
-static struct sched_group *
-find_idlest_group(struct sched_domain *sd, struct task_struct *p, int this_cpu)
-{
-	struct sched_group *idlest = NULL, *this = NULL, *group = sd->groups;
-	unsigned long min_load = ULONG_MAX, this_load = 0;
-	int load_idx = sd->forkexec_idx;
-	int imbalance = 100 + (sd->imbalance_pct-100)/2;
-
-	do {
-		unsigned long load, avg_load;
-		int local_group;
-		int i;
-
-		/* Skip over this group if it has no CPUs allowed */
-		if (!cpumask_intersects(sched_group_cpus(group),
-					&p->cpus_allowed))
-			continue;
-
-		local_group = cpumask_test_cpu(this_cpu,
-					       sched_group_cpus(group));
-
-		/* Tally up the load of all CPUs in the group */
-		avg_load = 0;
-
-		for_each_cpu(i, sched_group_cpus(group)) {
-			/* Bias balancing toward cpus of our domain */
-			if (local_group)
-				load = source_load(i, load_idx);
-			else
-				load = target_load(i, load_idx);
-
-			avg_load += load;
-		}
-
-		/* Adjust by relative CPU power of the group */
-		avg_load = (avg_load * SCHED_LOAD_SCALE) / group->cpu_power;
-
-		if (local_group) {
-			this_load = avg_load;
-			this = group;
-		} else if (avg_load < min_load) {
-			min_load = avg_load;
-			idlest = group;
-		}
-	} while (group = group->next, group != sd->groups);
-
-	if (!idlest || 100*this_load < imbalance*min_load)
-		return NULL;
-	return idlest;
-}
-
-/*
- * find_idlest_cpu - find the idlest cpu among the cpus in group.
- */
-static int
-find_idlest_cpu(struct sched_group *group, struct task_struct *p, int this_cpu)
-{
-	unsigned long load, min_load = ULONG_MAX;
-	int idlest = -1;
-	int i;
-
-	/* Traverse only the allowed CPUs */
-	for_each_cpu_and(i, sched_group_cpus(group), &p->cpus_allowed) {
-		load = weighted_cpuload(i);
-
-		if (load < min_load || (load == min_load && i == this_cpu)) {
-			min_load = load;
-			idlest = i;
-		}
-	}
-
-	return idlest;
-}
-
-/*
- * sched_balance_self: balance the current task (running on cpu) in domains
- * that have the 'flag' flag set. In practice, this is SD_BALANCE_FORK and
- * SD_BALANCE_EXEC.
- *
- * Balance, ie. select the least loaded group.
- *
- * Returns the target CPU number, or the same CPU if no balancing is needed.
- *
- * preempt must be disabled.
- */
-static int sched_balance_self(int cpu, int flag)
-{
-	struct task_struct *t = current;
-	struct sched_domain *tmp, *sd = NULL;
-
-	for_each_domain(cpu, tmp) {
-		/*
-		 * If power savings logic is enabled for a domain, stop there.
-		 */
-		if (tmp->flags & SD_POWERSAVINGS_BALANCE)
-			break;
-		if (tmp->flags & flag)
-			sd = tmp;
-	}
-
-	if (sd)
-		update_shares(sd);
-
-	while (sd) {
-		struct sched_group *group;
-		int new_cpu, weight;
-
-		if (!(sd->flags & flag)) {
-			sd = sd->child;
-			continue;
-		}
-
-		group = find_idlest_group(sd, t, cpu);
-		if (!group) {
-			sd = sd->child;
-			continue;
-		}
-
-		new_cpu = find_idlest_cpu(group, t, cpu);
-		if (new_cpu == -1 || new_cpu == cpu) {
-			/* Now try balancing at a lower domain level of cpu */
-			sd = sd->child;
-			continue;
-		}
-
-		/* Now try balancing at a lower domain level of new_cpu */
-		cpu = new_cpu;
-		weight = cpumask_weight(sched_domain_span(sd));
-		sd = NULL;
-		for_each_domain(cpu, tmp) {
-			if (weight <= cpumask_weight(sched_domain_span(tmp)))
-				break;
-			if (tmp->flags & flag)
-				sd = tmp;
-		}
-		/* while loop will break here if sd == NULL */
-	}
-
-	return cpu;
-}
-
 #endif /* CONFIG_SMP */
 
 /**
@@ -2455,37 +2312,22 @@ void task_oncpu_function_call(struct task_struct *p,
  *
  * returns failure only if the task is already active.
  */
-static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync)
+static int try_to_wake_up(struct task_struct *p, unsigned int state,
+			  int wake_flags)
 {
 	int cpu, orig_cpu, this_cpu, success = 0;
 	unsigned long flags;
-	long old_state;
 	struct rq *rq;
 
 	if (!sched_feat(SYNC_WAKEUPS))
-		sync = 0;
-
-#ifdef CONFIG_SMP
-	if (sched_feat(LB_WAKEUP_UPDATE) && !root_task_group_empty()) {
-		struct sched_domain *sd;
+		wake_flags &= ~WF_SYNC;
 
-		this_cpu = raw_smp_processor_id();
-		cpu = task_cpu(p);
-
-		for_each_domain(this_cpu, sd) {
-			if (cpumask_test_cpu(cpu, sched_domain_span(sd))) {
-				update_shares(sd);
-				break;
-			}
-		}
-	}
-#endif
+	this_cpu = get_cpu();
 
 	smp_wmb();
 	rq = task_rq_lock(p, &flags);
 	update_rq_clock(rq);
-	old_state = p->state;
-	if (!(old_state & state))
+	if (!(p->state & state))
 		goto out;
 
 	if (p->se.on_rq)
@@ -2493,27 +2335,29 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync)
 
 	cpu = task_cpu(p);
 	orig_cpu = cpu;
-	this_cpu = smp_processor_id();
 
 #ifdef CONFIG_SMP
 	if (unlikely(task_running(rq, p)))
 		goto out_activate;
 
-	cpu = p->sched_class->select_task_rq(p, sync);
-	if (cpu != orig_cpu) {
+	/*
+	 * In order to handle concurrent wakeups and release the rq->lock
+	 * we put the task in TASK_WAKING state.
+	 *
+	 * First fix up the nr_uninterruptible count:
+	 */
+	if (task_contributes_to_load(p))
+		rq->nr_uninterruptible--;
+	p->state = TASK_WAKING;
+	task_rq_unlock(rq, &flags);
+
+	cpu = p->sched_class->select_task_rq(p, SD_BALANCE_WAKE, wake_flags);
+	if (cpu != orig_cpu)
 		set_task_cpu(p, cpu);
-		task_rq_unlock(rq, &flags);
-		/* might preempt at this point */
-		rq = task_rq_lock(p, &flags);
-		old_state = p->state;
-		if (!(old_state & state))
-			goto out;
-		if (p->se.on_rq)
-			goto out_running;
 
-		this_cpu = smp_processor_id();
-		cpu = task_cpu(p);
-	}
+	rq = task_rq_lock(p, &flags);
+	WARN_ON(p->state != TASK_WAKING);
+	cpu = task_cpu(p);
 
 #ifdef CONFIG_SCHEDSTATS
 	schedstat_inc(rq, ttwu_count);
@@ -2533,7 +2377,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync)
 out_activate:
 #endif /* CONFIG_SMP */
 	schedstat_inc(p, se.nr_wakeups);
-	if (sync)
+	if (wake_flags & WF_SYNC)
 		schedstat_inc(p, se.nr_wakeups_sync);
 	if (orig_cpu != cpu)
 		schedstat_inc(p, se.nr_wakeups_migrate);
@@ -2562,7 +2406,7 @@ out_activate:
 
 out_running:
 	trace_sched_wakeup(rq, p, success);
-	check_preempt_curr(rq, p, sync);
+	check_preempt_curr(rq, p, wake_flags);
 
 	p->state = TASK_RUNNING;
 #ifdef CONFIG_SMP
@@ -2571,6 +2415,7 @@ out_running:
 #endif
 out:
 	task_rq_unlock(rq, &flags);
+	put_cpu();
 
 	return success;
 }
@@ -2613,6 +2458,7 @@ static void __sched_fork(struct task_struct *p)
 	p->se.avg_overlap		= 0;
 	p->se.start_runtime		= 0;
 	p->se.avg_wakeup		= sysctl_sched_wakeup_granularity;
+	p->se.avg_running		= 0;
 
 #ifdef CONFIG_SCHEDSTATS
 	p->se.wait_start			= 0;
@@ -2674,11 +2520,6 @@ void sched_fork(struct task_struct *p, int clone_flags)
 
 	__sched_fork(p);
 
-#ifdef CONFIG_SMP
-	cpu = sched_balance_self(cpu, SD_BALANCE_FORK);
-#endif
-	set_task_cpu(p, cpu);
-
 	/*
 	 * Make sure we do not leak PI boosting priority to the child.
 	 */
@@ -2709,6 +2550,11 @@ void sched_fork(struct task_struct *p, int clone_flags)
 	if (!rt_prio(p->prio))
 		p->sched_class = &fair_sched_class;
 
+#ifdef CONFIG_SMP
+	cpu = p->sched_class->select_task_rq(p, SD_BALANCE_FORK, 0);
+#endif
+	set_task_cpu(p, cpu);
+
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	if (likely(sched_info_on()))
 		memset(&p->sched_info, 0, sizeof(p->sched_info));
@@ -2754,7 +2600,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
 		inc_nr_running(rq);
 	}
 	trace_sched_wakeup_new(rq, p, 1);
-	check_preempt_curr(rq, p, 0);
+	check_preempt_curr(rq, p, WF_FORK);
 #ifdef CONFIG_SMP
 	if (p->sched_class->task_wake_up)
 		p->sched_class->task_wake_up(rq, p);
@@ -3263,7 +3109,7 @@ out:
 void sched_exec(void)
 {
 	int new_cpu, this_cpu = get_cpu();
-	new_cpu = sched_balance_self(this_cpu, SD_BALANCE_EXEC);
+	new_cpu = current->sched_class->select_task_rq(current, SD_BALANCE_EXEC, 0);
 	put_cpu();
 	if (new_cpu != this_cpu)
 		sched_migrate_task(current, new_cpu);
@@ -3683,11 +3529,6 @@ static inline int check_power_save_busiest_group(struct sd_lb_stats *sds,
 	*imbalance = sds->min_load_per_task;
 	sds->busiest = sds->group_min;
 
-	if (sched_mc_power_savings >= POWERSAVINGS_BALANCE_WAKEUP) {
-		cpu_rq(this_cpu)->rd->sched_mc_preferred_wakeup_cpu =
-			group_first_cpu(sds->group_leader);
-	}
-
 	return 1;
 
 }
@@ -3711,7 +3552,18 @@ static inline int check_power_save_busiest_group(struct sd_lb_stats *sds,
 }
 #endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
 
-unsigned long __weak arch_scale_smt_power(struct sched_domain *sd, int cpu)
+
+unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu)
+{
+	return SCHED_LOAD_SCALE;
+}
+
+unsigned long __weak arch_scale_freq_power(struct sched_domain *sd, int cpu)
+{
+	return default_scale_freq_power(sd, cpu);
+}
+
+unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu)
 {
 	unsigned long weight = cpumask_weight(sched_domain_span(sd));
 	unsigned long smt_gain = sd->smt_gain;
@@ -3721,6 +3573,11 @@ unsigned long __weak arch_scale_smt_power(struct sched_domain *sd, int cpu)
 	return smt_gain;
 }
 
+unsigned long __weak arch_scale_smt_power(struct sched_domain *sd, int cpu)
+{
+	return default_scale_smt_power(sd, cpu);
+}
+
 unsigned long scale_rt_power(int cpu)
 {
 	struct rq *rq = cpu_rq(cpu);
@@ -3745,10 +3602,19 @@ static void update_cpu_power(struct sched_domain *sd, int cpu)
 	unsigned long power = SCHED_LOAD_SCALE;
 	struct sched_group *sdg = sd->groups;
 
-	/* here we could scale based on cpufreq */
+	if (sched_feat(ARCH_POWER))
+		power *= arch_scale_freq_power(sd, cpu);
+	else
+		power *= default_scale_freq_power(sd, cpu);
+
+	power >>= SCHED_LOAD_SHIFT;
 
 	if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
-		power *= arch_scale_smt_power(sd, cpu);
+		if (sched_feat(ARCH_POWER))
+			power *= arch_scale_smt_power(sd, cpu);
+		else
+			power *= default_scale_smt_power(sd, cpu);
+
 		power >>= SCHED_LOAD_SHIFT;
 	}
 
@@ -4161,26 +4027,6 @@ ret:
 	return NULL;
 }
 
-static struct sched_group *group_of(int cpu)
-{
-	struct sched_domain *sd = rcu_dereference(cpu_rq(cpu)->sd);
-
-	if (!sd)
-		return NULL;
-
-	return sd->groups;
-}
-
-static unsigned long power_of(int cpu)
-{
-	struct sched_group *group = group_of(cpu);
-
-	if (!group)
-		return SCHED_LOAD_SCALE;
-
-	return group->cpu_power;
-}
-
 /*
  * find_busiest_queue - find the busiest runqueue among the cpus in group.
  */
@@ -5465,14 +5311,13 @@ static inline void schedule_debug(struct task_struct *prev)
 #endif
 }
 
-static void put_prev_task(struct rq *rq, struct task_struct *prev)
+static void put_prev_task(struct rq *rq, struct task_struct *p)
 {
-	if (prev->state == TASK_RUNNING) {
-		u64 runtime = prev->se.sum_exec_runtime;
+	u64 runtime = p->se.sum_exec_runtime - p->se.prev_sum_exec_runtime;
 
-		runtime -= prev->se.prev_sum_exec_runtime;
-		runtime = min_t(u64, runtime, 2*sysctl_sched_migration_cost);
+	update_avg(&p->se.avg_running, runtime);
 
+	if (p->state == TASK_RUNNING) {
 		/*
 		 * In order to avoid avg_overlap growing stale when we are
 		 * indeed overlapping and hence not getting put to sleep, grow
@@ -5482,9 +5327,12 @@ static void put_prev_task(struct rq *rq, struct task_struct *prev)
 		 * correlates to the amount of cache footprint a task can
 		 * build up.
 		 */
-		update_avg(&prev->se.avg_overlap, runtime);
+		runtime = min_t(u64, runtime, 2*sysctl_sched_migration_cost);
+		update_avg(&p->se.avg_overlap, runtime);
+	} else {
+		update_avg(&p->se.avg_running, 0);
 	}
-	prev->sched_class->put_prev_task(rq, prev);
+	p->sched_class->put_prev_task(rq, p);
 }
 
 /*
@@ -5716,10 +5564,10 @@ asmlinkage void __sched preempt_schedule_irq(void)
 
 #endif /* CONFIG_PREEMPT */
 
-int default_wake_function(wait_queue_t *curr, unsigned mode, int sync,
+int default_wake_function(wait_queue_t *curr, unsigned mode, int wake_flags,
 			  void *key)
 {
-	return try_to_wake_up(curr->private, mode, sync);
+	return try_to_wake_up(curr->private, mode, wake_flags);
 }
 EXPORT_SYMBOL(default_wake_function);
 
@@ -5733,14 +5581,14 @@ EXPORT_SYMBOL(default_wake_function);
  * zero in this (rare) case, and we handle it by continuing to scan the queue.
  */
 static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
-			int nr_exclusive, int sync, void *key)
+			int nr_exclusive, int wake_flags, void *key)
 {
 	wait_queue_t *curr, *next;
 
 	list_for_each_entry_safe(curr, next, &q->task_list, task_list) {
 		unsigned flags = curr->flags;
 
-		if (curr->func(curr, mode, sync, key) &&
+		if (curr->func(curr, mode, wake_flags, key) &&
 				(flags & WQ_FLAG_EXCLUSIVE) && !--nr_exclusive)
 			break;
 	}
@@ -5801,16 +5649,16 @@ void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode,
 			int nr_exclusive, void *key)
 {
 	unsigned long flags;
-	int sync = 1;
+	int wake_flags = WF_SYNC;
 
 	if (unlikely(!q))
 		return;
 
 	if (unlikely(!nr_exclusive))
-		sync = 0;
+		wake_flags = 0;
 
 	spin_lock_irqsave(&q->lock, flags);
-	__wake_up_common(q, mode, nr_exclusive, sync, key);
+	__wake_up_common(q, mode, nr_exclusive, wake_flags, key);
 	spin_unlock_irqrestore(&q->lock, flags);
 }
 EXPORT_SYMBOL_GPL(__wake_up_sync_key);
@@ -8000,9 +7848,7 @@ static int sd_degenerate(struct sched_domain *sd)
 	}
 
 	/* Following flags don't use groups */
-	if (sd->flags & (SD_WAKE_IDLE |
-			 SD_WAKE_AFFINE |
-			 SD_WAKE_BALANCE))
+	if (sd->flags & (SD_WAKE_AFFINE))
 		return 0;
 
 	return 1;
@@ -8019,10 +7865,6 @@ sd_parent_degenerate(struct sched_domain *sd, struct sched_domain *parent)
 	if (!cpumask_equal(sched_domain_span(sd), sched_domain_span(parent)))
 		return 0;
 
-	/* Does parent contain flags not in child? */
-	/* WAKE_BALANCE is a subset of WAKE_AFFINE */
-	if (cflags & SD_WAKE_AFFINE)
-		pflags &= ~SD_WAKE_BALANCE;
 	/* Flags needing groups don't count if only 1 group in parent */
 	if (parent->groups == parent->groups->next) {
 		pflags &= ~(SD_LOAD_BALANCE |
@@ -8708,10 +8550,10 @@ static void set_domain_attribute(struct sched_domain *sd,
 		request = attr->relax_domain_level;
 	if (request < sd->level) {
 		/* turn off idle balance on this domain */
-		sd->flags &= ~(SD_WAKE_IDLE|SD_BALANCE_NEWIDLE);
+		sd->flags &= ~(SD_BALANCE_WAKE|SD_BALANCE_NEWIDLE);
 	} else {
 		/* turn on idle balance on this domain */
-		sd->flags |= (SD_WAKE_IDLE_FAR|SD_BALANCE_NEWIDLE);
+		sd->flags |= (SD_BALANCE_WAKE|SD_BALANCE_NEWIDLE);
 	}
 }
 
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 5ddbd0891267..efb84409bc43 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -395,6 +395,7 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
 	PN(se.sum_exec_runtime);
 	PN(se.avg_overlap);
 	PN(se.avg_wakeup);
+	PN(se.avg_running);
 
 	nr_switches = p->nvcsw + p->nivcsw;
 
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index aa7f84121016..10d218ab69f2 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -711,7 +711,7 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
 
 	if (!initial) {
 		/* sleeps upto a single latency don't count. */
-		if (sched_feat(NEW_FAIR_SLEEPERS)) {
+		if (sched_feat(FAIR_SLEEPERS)) {
 			unsigned long thresh = sysctl_sched_latency;
 
 			/*
@@ -725,6 +725,13 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
 					 task_of(se)->policy != SCHED_IDLE))
 				thresh = calc_delta_fair(thresh, se);
 
+			/*
+			 * Halve their sleep time's effect, to allow
+			 * for a gentler effect of sleepers:
+			 */
+			if (sched_feat(GENTLE_FAIR_SLEEPERS))
+				thresh >>= 1;
+
 			vruntime -= thresh;
 		}
 	}
@@ -757,10 +764,10 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup)
 
 static void __clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
-	if (cfs_rq->last == se)
+	if (!se || cfs_rq->last == se)
 		cfs_rq->last = NULL;
 
-	if (cfs_rq->next == se)
+	if (!se || cfs_rq->next == se)
 		cfs_rq->next = NULL;
 }
 
@@ -1062,83 +1069,6 @@ static void yield_task_fair(struct rq *rq)
 	se->vruntime = rightmost->vruntime + 1;
 }
 
-/*
- * wake_idle() will wake a task on an idle cpu if task->cpu is
- * not idle and an idle cpu is available.  The span of cpus to
- * search starts with cpus closest then further out as needed,
- * so we always favor a closer, idle cpu.
- * Domains may include CPUs that are not usable for migration,
- * hence we need to mask them out (rq->rd->online)
- *
- * Returns the CPU we should wake onto.
- */
-#if defined(ARCH_HAS_SCHED_WAKE_IDLE)
-
-#define cpu_rd_active(cpu, rq) cpumask_test_cpu(cpu, rq->rd->online)
-
-static int wake_idle(int cpu, struct task_struct *p)
-{
-	struct sched_domain *sd;
-	int i;
-	unsigned int chosen_wakeup_cpu;
-	int this_cpu;
-	struct rq *task_rq = task_rq(p);
-
-	/*
-	 * At POWERSAVINGS_BALANCE_WAKEUP level, if both this_cpu and prev_cpu
-	 * are idle and this is not a kernel thread and this task's affinity
-	 * allows it to be moved to preferred cpu, then just move!
-	 */
-
-	this_cpu = smp_processor_id();
-	chosen_wakeup_cpu =
-		cpu_rq(this_cpu)->rd->sched_mc_preferred_wakeup_cpu;
-
-	if (sched_mc_power_savings >= POWERSAVINGS_BALANCE_WAKEUP &&
-		idle_cpu(cpu) && idle_cpu(this_cpu) &&
-		p->mm && !(p->flags & PF_KTHREAD) &&
-		cpu_isset(chosen_wakeup_cpu, p->cpus_allowed))
-		return chosen_wakeup_cpu;
-
-	/*
-	 * If it is idle, then it is the best cpu to run this task.
-	 *
-	 * This cpu is also the best, if it has more than one task already.
-	 * Siblings must be also busy(in most cases) as they didn't already
-	 * pickup the extra load from this cpu and hence we need not check
-	 * sibling runqueue info. This will avoid the checks and cache miss
-	 * penalities associated with that.
-	 */
-	if (idle_cpu(cpu) || cpu_rq(cpu)->cfs.nr_running > 1)
-		return cpu;
-
-	for_each_domain(cpu, sd) {
-		if ((sd->flags & SD_WAKE_IDLE)
-		    || ((sd->flags & SD_WAKE_IDLE_FAR)
-			&& !task_hot(p, task_rq->clock, sd))) {
-			for_each_cpu_and(i, sched_domain_span(sd),
-					 &p->cpus_allowed) {
-				if (cpu_rd_active(i, task_rq) && idle_cpu(i)) {
-					if (i != task_cpu(p)) {
-						schedstat_inc(p,
-						       se.nr_wakeups_idle);
-					}
-					return i;
-				}
-			}
-		} else {
-			break;
-		}
-	}
-	return cpu;
-}
-#else /* !ARCH_HAS_SCHED_WAKE_IDLE*/
-static inline int wake_idle(int cpu, struct task_struct *p)
-{
-	return cpu;
-}
-#endif
-
 #ifdef CONFIG_SMP
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
@@ -1225,25 +1155,34 @@ static inline unsigned long effective_load(struct task_group *tg, int cpu,
 
 #endif
 
-static int
-wake_affine(struct sched_domain *this_sd, struct rq *this_rq,
-	    struct task_struct *p, int prev_cpu, int this_cpu, int sync,
-	    int idx, unsigned long load, unsigned long this_load,
-	    unsigned int imbalance)
+static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync)
 {
-	struct task_struct *curr = this_rq->curr;
-	struct task_group *tg;
-	unsigned long tl = this_load;
+	struct task_struct *curr = current;
+	unsigned long this_load, load;
+	int idx, this_cpu, prev_cpu;
 	unsigned long tl_per_task;
+	unsigned int imbalance;
+	struct task_group *tg;
 	unsigned long weight;
 	int balanced;
 
-	if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS))
-		return 0;
+	idx	  = sd->wake_idx;
+	this_cpu  = smp_processor_id();
+	prev_cpu  = task_cpu(p);
+	load	  = source_load(prev_cpu, idx);
+	this_load = target_load(this_cpu, idx);
 
-	if (sync && (curr->se.avg_overlap > sysctl_sched_migration_cost ||
-			p->se.avg_overlap > sysctl_sched_migration_cost))
-		sync = 0;
+	if (sync) {
+	       if (sched_feat(SYNC_LESS) &&
+		   (curr->se.avg_overlap > sysctl_sched_migration_cost ||
+		    p->se.avg_overlap > sysctl_sched_migration_cost))
+		       sync = 0;
+	} else {
+		if (sched_feat(SYNC_MORE) &&
+		    (curr->se.avg_overlap < sysctl_sched_migration_cost &&
+		     p->se.avg_overlap < sysctl_sched_migration_cost))
+			sync = 1;
+	}
 
 	/*
 	 * If sync wakeup then subtract the (maximum possible)
@@ -1254,24 +1193,26 @@ wake_affine(struct sched_domain *this_sd, struct rq *this_rq,
 		tg = task_group(current);
 		weight = current->se.load.weight;
 
-		tl += effective_load(tg, this_cpu, -weight, -weight);
+		this_load += effective_load(tg, this_cpu, -weight, -weight);
 		load += effective_load(tg, prev_cpu, 0, -weight);
 	}
 
 	tg = task_group(p);
 	weight = p->se.load.weight;
 
+	imbalance = 100 + (sd->imbalance_pct - 100) / 2;
+
 	/*
 	 * In low-load situations, where prev_cpu is idle and this_cpu is idle
-	 * due to the sync cause above having dropped tl to 0, we'll always have
-	 * an imbalance, but there's really nothing you can do about that, so
-	 * that's good too.
+	 * due to the sync cause above having dropped this_load to 0, we'll
+	 * always have an imbalance, but there's really nothing you can do
+	 * about that, so that's good too.
 	 *
 	 * Otherwise check if either cpus are near enough in load to allow this
 	 * task to be woken on this_cpu.
 	 */
-	balanced = !tl ||
-		100*(tl + effective_load(tg, this_cpu, weight, weight)) <=
+	balanced = !this_load ||
+		100*(this_load + effective_load(tg, this_cpu, weight, weight)) <=
 		imbalance*(load + effective_load(tg, prev_cpu, 0, weight));
 
 	/*
@@ -1285,14 +1226,15 @@ wake_affine(struct sched_domain *this_sd, struct rq *this_rq,
 	schedstat_inc(p, se.nr_wakeups_affine_attempts);
 	tl_per_task = cpu_avg_load_per_task(this_cpu);
 
-	if (balanced || (tl <= load && tl + target_load(prev_cpu, idx) <=
-			tl_per_task)) {
+	if (balanced ||
+	    (this_load <= load &&
+	     this_load + target_load(prev_cpu, idx) <= tl_per_task)) {
 		/*
 		 * This domain has SD_WAKE_AFFINE and
 		 * p is cache cold in this domain, and
 		 * there is no bad imbalance.
 		 */
-		schedstat_inc(this_sd, ttwu_move_affine);
+		schedstat_inc(sd, ttwu_move_affine);
 		schedstat_inc(p, se.nr_wakeups_affine);
 
 		return 1;
@@ -1300,65 +1242,215 @@ wake_affine(struct sched_domain *this_sd, struct rq *this_rq,
 	return 0;
 }
 
-static int select_task_rq_fair(struct task_struct *p, int sync)
+/*
+ * find_idlest_group finds and returns the least busy CPU group within the
+ * domain.
+ */
+static struct sched_group *
+find_idlest_group(struct sched_domain *sd, struct task_struct *p,
+		  int this_cpu, int load_idx)
 {
-	struct sched_domain *sd, *this_sd = NULL;
-	int prev_cpu, this_cpu, new_cpu;
-	unsigned long load, this_load;
-	struct rq *this_rq;
-	unsigned int imbalance;
-	int idx;
+	struct sched_group *idlest = NULL, *this = NULL, *group = sd->groups;
+	unsigned long min_load = ULONG_MAX, this_load = 0;
+	int imbalance = 100 + (sd->imbalance_pct-100)/2;
 
-	prev_cpu	= task_cpu(p);
-	this_cpu	= smp_processor_id();
-	this_rq		= cpu_rq(this_cpu);
-	new_cpu		= prev_cpu;
+	do {
+		unsigned long load, avg_load;
+		int local_group;
+		int i;
 
-	/*
-	 * 'this_sd' is the first domain that both
-	 * this_cpu and prev_cpu are present in:
-	 */
-	for_each_domain(this_cpu, sd) {
-		if (cpumask_test_cpu(prev_cpu, sched_domain_span(sd))) {
-			this_sd = sd;
-			break;
+		/* Skip over this group if it has no CPUs allowed */
+		if (!cpumask_intersects(sched_group_cpus(group),
+					&p->cpus_allowed))
+			continue;
+
+		local_group = cpumask_test_cpu(this_cpu,
+					       sched_group_cpus(group));
+
+		/* Tally up the load of all CPUs in the group */
+		avg_load = 0;
+
+		for_each_cpu(i, sched_group_cpus(group)) {
+			/* Bias balancing toward cpus of our domain */
+			if (local_group)
+				load = source_load(i, load_idx);
+			else
+				load = target_load(i, load_idx);
+
+			avg_load += load;
+		}
+
+		/* Adjust by relative CPU power of the group */
+		avg_load = (avg_load * SCHED_LOAD_SCALE) / group->cpu_power;
+
+		if (local_group) {
+			this_load = avg_load;
+			this = group;
+		} else if (avg_load < min_load) {
+			min_load = avg_load;
+			idlest = group;
+		}
+	} while (group = group->next, group != sd->groups);
+
+	if (!idlest || 100*this_load < imbalance*min_load)
+		return NULL;
+	return idlest;
+}
+
+/*
+ * find_idlest_cpu - find the idlest cpu among the cpus in group.
+ */
+static int
+find_idlest_cpu(struct sched_group *group, struct task_struct *p, int this_cpu)
+{
+	unsigned long load, min_load = ULONG_MAX;
+	int idlest = -1;
+	int i;
+
+	/* Traverse only the allowed CPUs */
+	for_each_cpu_and(i, sched_group_cpus(group), &p->cpus_allowed) {
+		load = weighted_cpuload(i);
+
+		if (load < min_load || (load == min_load && i == this_cpu)) {
+			min_load = load;
+			idlest = i;
 		}
 	}
 
-	if (unlikely(!cpumask_test_cpu(this_cpu, &p->cpus_allowed)))
-		goto out;
+	return idlest;
+}
 
-	/*
-	 * Check for affine wakeup and passive balancing possibilities.
-	 */
-	if (!this_sd)
+/*
+ * sched_balance_self: balance the current task (running on cpu) in domains
+ * that have the 'flag' flag set. In practice, this is SD_BALANCE_FORK and
+ * SD_BALANCE_EXEC.
+ *
+ * Balance, ie. select the least loaded group.
+ *
+ * Returns the target CPU number, or the same CPU if no balancing is needed.
+ *
+ * preempt must be disabled.
+ */
+static int select_task_rq_fair(struct task_struct *p, int sd_flag, int wake_flags)
+{
+	struct sched_domain *tmp, *affine_sd = NULL, *sd = NULL;
+	int cpu = smp_processor_id();
+	int prev_cpu = task_cpu(p);
+	int new_cpu = cpu;
+	int want_affine = 0;
+	int want_sd = 1;
+	int sync = wake_flags & WF_SYNC;
+
+	if (sd_flag & SD_BALANCE_WAKE) {
+		if (sched_feat(AFFINE_WAKEUPS))
+			want_affine = 1;
+		new_cpu = prev_cpu;
+	}
+
+	rcu_read_lock();
+	for_each_domain(cpu, tmp) {
+		/*
+		 * If power savings logic is enabled for a domain, see if we
+		 * are not overloaded, if so, don't balance wider.
+		 */
+		if (tmp->flags & (SD_POWERSAVINGS_BALANCE|SD_PREFER_LOCAL)) {
+			unsigned long power = 0;
+			unsigned long nr_running = 0;
+			unsigned long capacity;
+			int i;
+
+			for_each_cpu(i, sched_domain_span(tmp)) {
+				power += power_of(i);
+				nr_running += cpu_rq(i)->cfs.nr_running;
+			}
+
+			capacity = DIV_ROUND_CLOSEST(power, SCHED_LOAD_SCALE);
+
+			if (tmp->flags & SD_POWERSAVINGS_BALANCE)
+				nr_running /= 2;
+
+			if (nr_running < capacity)
+				want_sd = 0;
+		}
+
+		if (want_affine && (tmp->flags & SD_WAKE_AFFINE) &&
+		    cpumask_test_cpu(prev_cpu, sched_domain_span(tmp))) {
+
+			affine_sd = tmp;
+			want_affine = 0;
+		}
+
+		if (!want_sd && !want_affine)
+			break;
+
+		if (!(tmp->flags & sd_flag))
+			continue;
+
+		if (want_sd)
+			sd = tmp;
+	}
+
+	if (sched_feat(LB_SHARES_UPDATE)) {
+		/*
+		 * Pick the largest domain to update shares over
+		 */
+		tmp = sd;
+		if (affine_sd && (!tmp ||
+				  cpumask_weight(sched_domain_span(affine_sd)) >
+				  cpumask_weight(sched_domain_span(sd))))
+			tmp = affine_sd;
+
+		if (tmp)
+			update_shares(tmp);
+	}
+
+	if (affine_sd && wake_affine(affine_sd, p, sync)) {
+		new_cpu = cpu;
 		goto out;
+	}
 
-	idx = this_sd->wake_idx;
+	while (sd) {
+		int load_idx = sd->forkexec_idx;
+		struct sched_group *group;
+		int weight;
 
-	imbalance = 100 + (this_sd->imbalance_pct - 100) / 2;
+		if (!(sd->flags & sd_flag)) {
+			sd = sd->child;
+			continue;
+		}
 
-	load = source_load(prev_cpu, idx);
-	this_load = target_load(this_cpu, idx);
+		if (sd_flag & SD_BALANCE_WAKE)
+			load_idx = sd->wake_idx;
 
-	if (wake_affine(this_sd, this_rq, p, prev_cpu, this_cpu, sync, idx,
-				     load, this_load, imbalance))
-		return this_cpu;
+		group = find_idlest_group(sd, p, cpu, load_idx);
+		if (!group) {
+			sd = sd->child;
+			continue;
+		}
 
-	/*
-	 * Start passive balancing when half the imbalance_pct
-	 * limit is reached.
-	 */
-	if (this_sd->flags & SD_WAKE_BALANCE) {
-		if (imbalance*this_load <= 100*load) {
-			schedstat_inc(this_sd, ttwu_move_balance);
-			schedstat_inc(p, se.nr_wakeups_passive);
-			return this_cpu;
+		new_cpu = find_idlest_cpu(group, p, cpu);
+		if (new_cpu == -1 || new_cpu == cpu) {
+			/* Now try balancing at a lower domain level of cpu */
+			sd = sd->child;
+			continue;
 		}
+
+		/* Now try balancing at a lower domain level of new_cpu */
+		cpu = new_cpu;
+		weight = cpumask_weight(sched_domain_span(sd));
+		sd = NULL;
+		for_each_domain(cpu, tmp) {
+			if (weight <= cpumask_weight(sched_domain_span(tmp)))
+				break;
+			if (tmp->flags & sd_flag)
+				sd = tmp;
+		}
+		/* while loop will break here if sd == NULL */
 	}
 
 out:
-	return wake_idle(new_cpu, p);
+	rcu_read_unlock();
+	return new_cpu;
 }
 #endif /* CONFIG_SMP */
 
@@ -1471,11 +1563,12 @@ static void set_next_buddy(struct sched_entity *se)
 /*
  * Preempt the current task with a newly woken task if needed:
  */
-static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync)
+static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_flags)
 {
 	struct task_struct *curr = rq->curr;
 	struct sched_entity *se = &curr->se, *pse = &p->se;
 	struct cfs_rq *cfs_rq = task_cfs_rq(curr);
+	int sync = wake_flags & WF_SYNC;
 
 	update_curr(cfs_rq);
 
@@ -1501,7 +1594,8 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync)
 	 */
 	if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle))
 		set_last_buddy(se);
-	set_next_buddy(pse);
+	if (sched_feat(NEXT_BUDDY) && !(wake_flags & WF_FORK))
+		set_next_buddy(pse);
 
 	/*
 	 * We can come here with TIF_NEED_RESCHED already set from new task
@@ -1523,16 +1617,25 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync)
 		return;
 	}
 
-	if (!sched_feat(WAKEUP_PREEMPT))
-		return;
-
-	if (sched_feat(WAKEUP_OVERLAP) && (sync ||
-			(se->avg_overlap < sysctl_sched_migration_cost &&
-			 pse->avg_overlap < sysctl_sched_migration_cost))) {
+	if ((sched_feat(WAKEUP_SYNC) && sync) ||
+	    (sched_feat(WAKEUP_OVERLAP) &&
+	     (se->avg_overlap < sysctl_sched_migration_cost &&
+	      pse->avg_overlap < sysctl_sched_migration_cost))) {
 		resched_task(curr);
 		return;
 	}
 
+	if (sched_feat(WAKEUP_RUNNING)) {
+		if (pse->avg_running < se->avg_running) {
+			set_next_buddy(pse);
+			resched_task(curr);
+			return;
+		}
+	}
+
+	if (!sched_feat(WAKEUP_PREEMPT))
+		return;
+
 	find_matching_se(&se, &pse);
 
 	BUG_ON(!pse);
@@ -1555,8 +1658,13 @@ static struct task_struct *pick_next_task_fair(struct rq *rq)
 		/*
 		 * If se was a buddy, clear it so that it will have to earn
 		 * the favour again.
+		 *
+		 * If se was not a buddy, clear the buddies because neither
+		 * was elegible to run, let them earn it again.
+		 *
+		 * IOW. unconditionally clear buddies.
 		 */
-		__clear_buddies(cfs_rq, se);
+		__clear_buddies(cfs_rq, NULL);
 		set_next_entity(cfs_rq, se);
 		cfs_rq = group_cfs_rq(se);
 	} while (cfs_rq);
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index e2dc63a5815d..0d94083582c7 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -1,17 +1,123 @@
-SCHED_FEAT(NEW_FAIR_SLEEPERS, 0)
+/*
+ * Disregards a certain amount of sleep time (sched_latency_ns) and
+ * considers the task to be running during that period. This gives it
+ * a service deficit on wakeup, allowing it to run sooner.
+ */
+SCHED_FEAT(FAIR_SLEEPERS, 1)
+
+/*
+ * Only give sleepers 50% of their service deficit. This allows
+ * them to run sooner, but does not allow tons of sleepers to
+ * rip the spread apart.
+ */
+SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 1)
+
+/*
+ * By not normalizing the sleep time, heavy tasks get an effective
+ * longer period, and lighter task an effective shorter period they
+ * are considered running.
+ */
 SCHED_FEAT(NORMALIZED_SLEEPER, 0)
-SCHED_FEAT(ADAPTIVE_GRAN, 1)
-SCHED_FEAT(WAKEUP_PREEMPT, 1)
+
+/*
+ * Place new tasks ahead so that they do not starve already running
+ * tasks
+ */
 SCHED_FEAT(START_DEBIT, 1)
+
+/*
+ * Should wakeups try to preempt running tasks.
+ */
+SCHED_FEAT(WAKEUP_PREEMPT, 1)
+
+/*
+ * Compute wakeup_gran based on task behaviour, clipped to
+ *  [0, sched_wakeup_gran_ns]
+ */
+SCHED_FEAT(ADAPTIVE_GRAN, 1)
+
+/*
+ * When converting the wakeup granularity to virtual time, do it such
+ * that heavier tasks preempting a lighter task have an edge.
+ */
+SCHED_FEAT(ASYM_GRAN, 1)
+
+/*
+ * Always wakeup-preempt SYNC wakeups, see SYNC_WAKEUPS.
+ */
+SCHED_FEAT(WAKEUP_SYNC, 0)
+
+/*
+ * Wakeup preempt based on task behaviour. Tasks that do not overlap
+ * don't get preempted.
+ */
+SCHED_FEAT(WAKEUP_OVERLAP, 0)
+
+/*
+ * Wakeup preemption towards tasks that run short
+ */
+SCHED_FEAT(WAKEUP_RUNNING, 0)
+
+/*
+ * Use the SYNC wakeup hint, pipes and the likes use this to indicate
+ * the remote end is likely to consume the data we just wrote, and
+ * therefore has cache benefit from being placed on the same cpu, see
+ * also AFFINE_WAKEUPS.
+ */
+SCHED_FEAT(SYNC_WAKEUPS, 1)
+
+/*
+ * Based on load and program behaviour, see if it makes sense to place
+ * a newly woken task on the same cpu as the task that woke it --
+ * improve cache locality. Typically used with SYNC wakeups as
+ * generated by pipes and the like, see also SYNC_WAKEUPS.
+ */
 SCHED_FEAT(AFFINE_WAKEUPS, 1)
+
+/*
+ * Weaken SYNC hint based on overlap
+ */
+SCHED_FEAT(SYNC_LESS, 1)
+
+/*
+ * Add SYNC hint based on overlap
+ */
+SCHED_FEAT(SYNC_MORE, 0)
+
+/*
+ * Prefer to schedule the task we woke last (assuming it failed
+ * wakeup-preemption), since its likely going to consume data we
+ * touched, increases cache locality.
+ */
+SCHED_FEAT(NEXT_BUDDY, 0)
+
+/*
+ * Prefer to schedule the task that ran last (when we did
+ * wake-preempt) as that likely will touch the same data, increases
+ * cache locality.
+ */
+SCHED_FEAT(LAST_BUDDY, 1)
+
+/*
+ * Consider buddies to be cache hot, decreases the likelyness of a
+ * cache buddy being migrated away, increases cache locality.
+ */
 SCHED_FEAT(CACHE_HOT_BUDDY, 1)
-SCHED_FEAT(SYNC_WAKEUPS, 1)
+
+/*
+ * Use arch dependent cpu power functions
+ */
+SCHED_FEAT(ARCH_POWER, 0)
+
 SCHED_FEAT(HRTICK, 0)
 SCHED_FEAT(DOUBLE_TICK, 0)
-SCHED_FEAT(ASYM_GRAN, 1)
 SCHED_FEAT(LB_BIAS, 1)
-SCHED_FEAT(LB_WAKEUP_UPDATE, 1)
+SCHED_FEAT(LB_SHARES_UPDATE, 1)
 SCHED_FEAT(ASYM_EFF_LOAD, 1)
-SCHED_FEAT(WAKEUP_OVERLAP, 0)
-SCHED_FEAT(LAST_BUDDY, 1)
+
+/*
+ * Spin-wait on mutex acquisition when the mutex owner is running on
+ * another cpu -- assumes that when the owner is running, it will soon
+ * release the lock. Decreases scheduling overhead.
+ */
 SCHED_FEAT(OWNER_SPIN, 1)
diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c
index 499672c10cbd..a8b448af004b 100644
--- a/kernel/sched_idletask.c
+++ b/kernel/sched_idletask.c
@@ -6,7 +6,7 @@
  */
 
 #ifdef CONFIG_SMP
-static int select_task_rq_idle(struct task_struct *p, int sync)
+static int select_task_rq_idle(struct task_struct *p, int sd_flag, int flags)
 {
 	return task_cpu(p); /* IDLE tasks as never migrated */
 }
@@ -14,7 +14,7 @@ static int select_task_rq_idle(struct task_struct *p, int sync)
 /*
  * Idle tasks are unconditionally rescheduled:
  */
-static void check_preempt_curr_idle(struct rq *rq, struct task_struct *p, int sync)
+static void check_preempt_curr_idle(struct rq *rq, struct task_struct *p, int flags)
 {
 	resched_task(rq->idle);
 }
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 2eb4bd6a526c..13de7126a6ab 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -938,10 +938,13 @@ static void yield_task_rt(struct rq *rq)
 #ifdef CONFIG_SMP
 static int find_lowest_rq(struct task_struct *task);
 
-static int select_task_rq_rt(struct task_struct *p, int sync)
+static int select_task_rq_rt(struct task_struct *p, int sd_flag, int flags)
 {
 	struct rq *rq = task_rq(p);
 
+	if (sd_flag != SD_BALANCE_WAKE)
+		return smp_processor_id();
+
 	/*
 	 * If the current task is an RT task, then
 	 * try to see if we can wake this RT task up on another
@@ -999,7 +1002,7 @@ static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p)
 /*
  * Preempt the current task with a newly woken task if needed:
  */
-static void check_preempt_curr_rt(struct rq *rq, struct task_struct *p, int sync)
+static void check_preempt_curr_rt(struct rq *rq, struct task_struct *p, int flags)
 {
 	if (p->prio < rq->curr->prio) {
 		resched_task(rq->curr);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 7db25067cd2d..f8749e5216e0 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -57,7 +57,7 @@ static struct softirq_action softirq_vec[NR_SOFTIRQS] __cacheline_aligned_in_smp
 static DEFINE_PER_CPU(struct task_struct *, ksoftirqd);
 
 char *softirq_to_name[NR_SOFTIRQS] = {
-	"HI", "TIMER", "NET_TX", "NET_RX", "BLOCK",
+	"HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "BLOCK_IOPOLL",
 	"TASKLET", "SCHED", "HRTIMER",	"RCU"
 };
 
diff --git a/kernel/time.c b/kernel/time.c
index 29511943871a..2e2e469a7fec 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -370,13 +370,20 @@ EXPORT_SYMBOL(mktime);
  *	0 <= tv_nsec < NSEC_PER_SEC
  * For negative values only the tv_sec field is negative !
  */
-void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec)
+void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec)
 {
 	while (nsec >= NSEC_PER_SEC) {
+		/*
+		 * The following asm() prevents the compiler from
+		 * optimising this loop into a modulo operation. See
+		 * also __iter_div_u64_rem() in include/linux/time.h
+		 */
+		asm("" : "+rm"(nsec));
 		nsec -= NSEC_PER_SEC;
 		++sec;
 	}
 	while (nsec < 0) {
+		asm("" : "+rm"(nsec));
 		nsec += NSEC_PER_SEC;
 		--sec;
 	}
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 7466cb811251..09113347d328 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -21,7 +21,6 @@
  *
  * TODO WishList:
  *   o Allow clocksource drivers to be unregistered
- *   o get rid of clocksource_jiffies extern
  */
 
 #include <linux/clocksource.h>
@@ -30,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/sched.h> /* for spin_unlock_irq() using preempt_count() m68k */
 #include <linux/tick.h>
+#include <linux/kthread.h>
 
 void timecounter_init(struct timecounter *tc,
 		      const struct cyclecounter *cc,
@@ -107,50 +107,35 @@ u64 timecounter_cyc2time(struct timecounter *tc,
 }
 EXPORT_SYMBOL(timecounter_cyc2time);
 
-/* XXX - Would like a better way for initializing curr_clocksource */
-extern struct clocksource clocksource_jiffies;
-
 /*[Clocksource internal variables]---------
  * curr_clocksource:
- *	currently selected clocksource. Initialized to clocksource_jiffies.
- * next_clocksource:
- *	pending next selected clocksource.
+ *	currently selected clocksource.
  * clocksource_list:
  *	linked list with the registered clocksources
- * clocksource_lock:
- *	protects manipulations to curr_clocksource and next_clocksource
- *	and the clocksource_list
+ * clocksource_mutex:
+ *	protects manipulations to curr_clocksource and the clocksource_list
  * override_name:
  *	Name of the user-specified clocksource.
  */
-static struct clocksource *curr_clocksource = &clocksource_jiffies;
-static struct clocksource *next_clocksource;
-static struct clocksource *clocksource_override;
+static struct clocksource *curr_clocksource;
 static LIST_HEAD(clocksource_list);
-static DEFINE_SPINLOCK(clocksource_lock);
+static DEFINE_MUTEX(clocksource_mutex);
 static char override_name[32];
 static int finished_booting;
 
-/* clocksource_done_booting - Called near the end of core bootup
- *
- * Hack to avoid lots of clocksource churn at boot time.
- * We use fs_initcall because we want this to start before
- * device_initcall but after subsys_initcall.
- */
-static int __init clocksource_done_booting(void)
-{
-	finished_booting = 1;
-	return 0;
-}
-fs_initcall(clocksource_done_booting);
-
 #ifdef CONFIG_CLOCKSOURCE_WATCHDOG
+static void clocksource_watchdog_work(struct work_struct *work);
+
 static LIST_HEAD(watchdog_list);
 static struct clocksource *watchdog;
 static struct timer_list watchdog_timer;
+static DECLARE_WORK(watchdog_work, clocksource_watchdog_work);
 static DEFINE_SPINLOCK(watchdog_lock);
 static cycle_t watchdog_last;
-static unsigned long watchdog_resumed;
+static int watchdog_running;
+
+static int clocksource_watchdog_kthread(void *data);
+static void __clocksource_change_rating(struct clocksource *cs, int rating);
 
 /*
  * Interval: 0.5sec Threshold: 0.0625s
@@ -158,135 +143,249 @@ static unsigned long watchdog_resumed;
 #define WATCHDOG_INTERVAL (HZ >> 1)
 #define WATCHDOG_THRESHOLD (NSEC_PER_SEC >> 4)
 
-static void clocksource_ratewd(struct clocksource *cs, int64_t delta)
+static void clocksource_watchdog_work(struct work_struct *work)
 {
-	if (delta > -WATCHDOG_THRESHOLD && delta < WATCHDOG_THRESHOLD)
-		return;
+	/*
+	 * If kthread_run fails the next watchdog scan over the
+	 * watchdog_list will find the unstable clock again.
+	 */
+	kthread_run(clocksource_watchdog_kthread, NULL, "kwatchdog");
+}
 
+static void __clocksource_unstable(struct clocksource *cs)
+{
+	cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
+	cs->flags |= CLOCK_SOURCE_UNSTABLE;
+	if (finished_booting)
+		schedule_work(&watchdog_work);
+}
+
+static void clocksource_unstable(struct clocksource *cs, int64_t delta)
+{
 	printk(KERN_WARNING "Clocksource %s unstable (delta = %Ld ns)\n",
 	       cs->name, delta);
-	cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
-	clocksource_change_rating(cs, 0);
-	list_del(&cs->wd_list);
+	__clocksource_unstable(cs);
+}
+
+/**
+ * clocksource_mark_unstable - mark clocksource unstable via watchdog
+ * @cs:		clocksource to be marked unstable
+ *
+ * This function is called instead of clocksource_change_rating from
+ * cpu hotplug code to avoid a deadlock between the clocksource mutex
+ * and the cpu hotplug mutex. It defers the update of the clocksource
+ * to the watchdog thread.
+ */
+void clocksource_mark_unstable(struct clocksource *cs)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&watchdog_lock, flags);
+	if (!(cs->flags & CLOCK_SOURCE_UNSTABLE)) {
+		if (list_empty(&cs->wd_list))
+			list_add(&cs->wd_list, &watchdog_list);
+		__clocksource_unstable(cs);
+	}
+	spin_unlock_irqrestore(&watchdog_lock, flags);
 }
 
 static void clocksource_watchdog(unsigned long data)
 {
-	struct clocksource *cs, *tmp;
+	struct clocksource *cs;
 	cycle_t csnow, wdnow;
 	int64_t wd_nsec, cs_nsec;
-	int resumed;
+	int next_cpu;
 
 	spin_lock(&watchdog_lock);
-
-	resumed = test_and_clear_bit(0, &watchdog_resumed);
+	if (!watchdog_running)
+		goto out;
 
 	wdnow = watchdog->read(watchdog);
-	wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
+	wd_nsec = clocksource_cyc2ns((wdnow - watchdog_last) & watchdog->mask,
+				     watchdog->mult, watchdog->shift);
 	watchdog_last = wdnow;
 
-	list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
-		csnow = cs->read(cs);
+	list_for_each_entry(cs, &watchdog_list, wd_list) {
 
-		if (unlikely(resumed)) {
-			cs->wd_last = csnow;
+		/* Clocksource already marked unstable? */
+		if (cs->flags & CLOCK_SOURCE_UNSTABLE) {
+			if (finished_booting)
+				schedule_work(&watchdog_work);
 			continue;
 		}
 
-		/* Initialized ? */
+		csnow = cs->read(cs);
+
+		/* Clocksource initialized ? */
 		if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) {
-			if ((cs->flags & CLOCK_SOURCE_IS_CONTINUOUS) &&
-			    (watchdog->flags & CLOCK_SOURCE_IS_CONTINUOUS)) {
-				cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
-				/*
-				 * We just marked the clocksource as
-				 * highres-capable, notify the rest of the
-				 * system as well so that we transition
-				 * into high-res mode:
-				 */
-				tick_clock_notify();
-			}
 			cs->flags |= CLOCK_SOURCE_WATCHDOG;
 			cs->wd_last = csnow;
-		} else {
-			cs_nsec = cyc2ns(cs, (csnow - cs->wd_last) & cs->mask);
-			cs->wd_last = csnow;
-			/* Check the delta. Might remove from the list ! */
-			clocksource_ratewd(cs, cs_nsec - wd_nsec);
+			continue;
 		}
-	}
 
-	if (!list_empty(&watchdog_list)) {
-		/*
-		 * Cycle through CPUs to check if the CPUs stay
-		 * synchronized to each other.
-		 */
-		int next_cpu = cpumask_next(raw_smp_processor_id(),
-					    cpu_online_mask);
+		/* Check the deviation from the watchdog clocksource. */
+		cs_nsec = clocksource_cyc2ns((csnow - cs->wd_last) &
+					     cs->mask, cs->mult, cs->shift);
+		cs->wd_last = csnow;
+		if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) {
+			clocksource_unstable(cs, cs_nsec - wd_nsec);
+			continue;
+		}
 
-		if (next_cpu >= nr_cpu_ids)
-			next_cpu = cpumask_first(cpu_online_mask);
-		watchdog_timer.expires += WATCHDOG_INTERVAL;
-		add_timer_on(&watchdog_timer, next_cpu);
+		if (!(cs->flags & CLOCK_SOURCE_VALID_FOR_HRES) &&
+		    (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS) &&
+		    (watchdog->flags & CLOCK_SOURCE_IS_CONTINUOUS)) {
+			cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
+			/*
+			 * We just marked the clocksource as highres-capable,
+			 * notify the rest of the system as well so that we
+			 * transition into high-res mode:
+			 */
+			tick_clock_notify();
+		}
 	}
+
+	/*
+	 * Cycle through CPUs to check if the CPUs stay synchronized
+	 * to each other.
+	 */
+	next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
+	if (next_cpu >= nr_cpu_ids)
+		next_cpu = cpumask_first(cpu_online_mask);
+	watchdog_timer.expires += WATCHDOG_INTERVAL;
+	add_timer_on(&watchdog_timer, next_cpu);
+out:
 	spin_unlock(&watchdog_lock);
 }
+
+static inline void clocksource_start_watchdog(void)
+{
+	if (watchdog_running || !watchdog || list_empty(&watchdog_list))
+		return;
+	init_timer(&watchdog_timer);
+	watchdog_timer.function = clocksource_watchdog;
+	watchdog_last = watchdog->read(watchdog);
+	watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
+	add_timer_on(&watchdog_timer, cpumask_first(cpu_online_mask));
+	watchdog_running = 1;
+}
+
+static inline void clocksource_stop_watchdog(void)
+{
+	if (!watchdog_running || (watchdog && !list_empty(&watchdog_list)))
+		return;
+	del_timer(&watchdog_timer);
+	watchdog_running = 0;
+}
+
+static inline void clocksource_reset_watchdog(void)
+{
+	struct clocksource *cs;
+
+	list_for_each_entry(cs, &watchdog_list, wd_list)
+		cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
+}
+
 static void clocksource_resume_watchdog(void)
 {
-	set_bit(0, &watchdog_resumed);
+	unsigned long flags;
+
+	spin_lock_irqsave(&watchdog_lock, flags);
+	clocksource_reset_watchdog();
+	spin_unlock_irqrestore(&watchdog_lock, flags);
 }
 
-static void clocksource_check_watchdog(struct clocksource *cs)
+static void clocksource_enqueue_watchdog(struct clocksource *cs)
 {
-	struct clocksource *cse;
 	unsigned long flags;
 
 	spin_lock_irqsave(&watchdog_lock, flags);
 	if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
-		int started = !list_empty(&watchdog_list);
-
+		/* cs is a clocksource to be watched. */
 		list_add(&cs->wd_list, &watchdog_list);
-		if (!started && watchdog) {
-			watchdog_last = watchdog->read(watchdog);
-			watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
-			add_timer_on(&watchdog_timer,
-				     cpumask_first(cpu_online_mask));
-		}
+		cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
 	} else {
+		/* cs is a watchdog. */
 		if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
 			cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
-
+		/* Pick the best watchdog. */
 		if (!watchdog || cs->rating > watchdog->rating) {
-			if (watchdog)
-				del_timer(&watchdog_timer);
 			watchdog = cs;
-			init_timer(&watchdog_timer);
-			watchdog_timer.function = clocksource_watchdog;
-
 			/* Reset watchdog cycles */
-			list_for_each_entry(cse, &watchdog_list, wd_list)
-				cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
-			/* Start if list is not empty */
-			if (!list_empty(&watchdog_list)) {
-				watchdog_last = watchdog->read(watchdog);
-				watchdog_timer.expires =
-					jiffies + WATCHDOG_INTERVAL;
-				add_timer_on(&watchdog_timer,
-					     cpumask_first(cpu_online_mask));
-			}
+			clocksource_reset_watchdog();
+		}
+	}
+	/* Check if the watchdog timer needs to be started. */
+	clocksource_start_watchdog();
+	spin_unlock_irqrestore(&watchdog_lock, flags);
+}
+
+static void clocksource_dequeue_watchdog(struct clocksource *cs)
+{
+	struct clocksource *tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&watchdog_lock, flags);
+	if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) {
+		/* cs is a watched clocksource. */
+		list_del_init(&cs->wd_list);
+	} else if (cs == watchdog) {
+		/* Reset watchdog cycles */
+		clocksource_reset_watchdog();
+		/* Current watchdog is removed. Find an alternative. */
+		watchdog = NULL;
+		list_for_each_entry(tmp, &clocksource_list, list) {
+			if (tmp == cs || tmp->flags & CLOCK_SOURCE_MUST_VERIFY)
+				continue;
+			if (!watchdog || tmp->rating > watchdog->rating)
+				watchdog = tmp;
 		}
 	}
+	cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
+	/* Check if the watchdog timer needs to be stopped. */
+	clocksource_stop_watchdog();
 	spin_unlock_irqrestore(&watchdog_lock, flags);
 }
-#else
-static void clocksource_check_watchdog(struct clocksource *cs)
+
+static int clocksource_watchdog_kthread(void *data)
+{
+	struct clocksource *cs, *tmp;
+	unsigned long flags;
+	LIST_HEAD(unstable);
+
+	mutex_lock(&clocksource_mutex);
+	spin_lock_irqsave(&watchdog_lock, flags);
+	list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list)
+		if (cs->flags & CLOCK_SOURCE_UNSTABLE) {
+			list_del_init(&cs->wd_list);
+			list_add(&cs->wd_list, &unstable);
+		}
+	/* Check if the watchdog timer needs to be stopped. */
+	clocksource_stop_watchdog();
+	spin_unlock_irqrestore(&watchdog_lock, flags);
+
+	/* Needs to be done outside of watchdog lock */
+	list_for_each_entry_safe(cs, tmp, &unstable, wd_list) {
+		list_del_init(&cs->wd_list);
+		__clocksource_change_rating(cs, 0);
+	}
+	mutex_unlock(&clocksource_mutex);
+	return 0;
+}
+
+#else /* CONFIG_CLOCKSOURCE_WATCHDOG */
+
+static void clocksource_enqueue_watchdog(struct clocksource *cs)
 {
 	if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
 		cs->flags |= CLOCK_SOURCE_VALID_FOR_HRES;
 }
 
+static inline void clocksource_dequeue_watchdog(struct clocksource *cs) { }
 static inline void clocksource_resume_watchdog(void) { }
-#endif
+static inline int clocksource_watchdog_kthread(void *data) { return 0; }
+
+#endif /* CONFIG_CLOCKSOURCE_WATCHDOG */
 
 /**
  * clocksource_resume - resume the clocksource(s)
@@ -294,18 +393,16 @@ static inline void clocksource_resume_watchdog(void) { }
 void clocksource_resume(void)
 {
 	struct clocksource *cs;
-	unsigned long flags;
 
-	spin_lock_irqsave(&clocksource_lock, flags);
+	mutex_lock(&clocksource_mutex);
 
-	list_for_each_entry(cs, &clocksource_list, list) {
+	list_for_each_entry(cs, &clocksource_list, list)
 		if (cs->resume)
 			cs->resume();
-	}
 
 	clocksource_resume_watchdog();
 
-	spin_unlock_irqrestore(&clocksource_lock, flags);
+	mutex_unlock(&clocksource_mutex);
 }
 
 /**
@@ -320,75 +417,94 @@ void clocksource_touch_watchdog(void)
 	clocksource_resume_watchdog();
 }
 
+#ifdef CONFIG_GENERIC_TIME
+
 /**
- * clocksource_get_next - Returns the selected clocksource
+ * clocksource_select - Select the best clocksource available
+ *
+ * Private function. Must hold clocksource_mutex when called.
  *
+ * Select the clocksource with the best rating, or the clocksource,
+ * which is selected by userspace override.
  */
-struct clocksource *clocksource_get_next(void)
+static void clocksource_select(void)
 {
-	unsigned long flags;
+	struct clocksource *best, *cs;
 
-	spin_lock_irqsave(&clocksource_lock, flags);
-	if (next_clocksource && finished_booting) {
-		curr_clocksource = next_clocksource;
-		next_clocksource = NULL;
+	if (!finished_booting || list_empty(&clocksource_list))
+		return;
+	/* First clocksource on the list has the best rating. */
+	best = list_first_entry(&clocksource_list, struct clocksource, list);
+	/* Check for the override clocksource. */
+	list_for_each_entry(cs, &clocksource_list, list) {
+		if (strcmp(cs->name, override_name) != 0)
+			continue;
+		/*
+		 * Check to make sure we don't switch to a non-highres
+		 * capable clocksource if the tick code is in oneshot
+		 * mode (highres or nohz)
+		 */
+		if (!(cs->flags & CLOCK_SOURCE_VALID_FOR_HRES) &&
+		    tick_oneshot_mode_active()) {
+			/* Override clocksource cannot be used. */
+			printk(KERN_WARNING "Override clocksource %s is not "
+			       "HRT compatible. Cannot switch while in "
+			       "HRT/NOHZ mode\n", cs->name);
+			override_name[0] = 0;
+		} else
+			/* Override clocksource can be used. */
+			best = cs;
+		break;
+	}
+	if (curr_clocksource != best) {
+		printk(KERN_INFO "Switching to clocksource %s\n", best->name);
+		curr_clocksource = best;
+		timekeeping_notify(curr_clocksource);
 	}
-	spin_unlock_irqrestore(&clocksource_lock, flags);
-
-	return curr_clocksource;
 }
 
-/**
- * select_clocksource - Selects the best registered clocksource.
- *
- * Private function. Must hold clocksource_lock when called.
+#else /* CONFIG_GENERIC_TIME */
+
+static inline void clocksource_select(void) { }
+
+#endif
+
+/*
+ * clocksource_done_booting - Called near the end of core bootup
  *
- * Select the clocksource with the best rating, or the clocksource,
- * which is selected by userspace override.
+ * Hack to avoid lots of clocksource churn at boot time.
+ * We use fs_initcall because we want this to start before
+ * device_initcall but after subsys_initcall.
  */
-static struct clocksource *select_clocksource(void)
+static int __init clocksource_done_booting(void)
 {
-	struct clocksource *next;
-
-	if (list_empty(&clocksource_list))
-		return NULL;
-
-	if (clocksource_override)
-		next = clocksource_override;
-	else
-		next = list_entry(clocksource_list.next, struct clocksource,
-				  list);
+	finished_booting = 1;
 
-	if (next == curr_clocksource)
-		return NULL;
+	/*
+	 * Run the watchdog first to eliminate unstable clock sources
+	 */
+	clocksource_watchdog_kthread(NULL);
 
-	return next;
+	mutex_lock(&clocksource_mutex);
+	clocksource_select();
+	mutex_unlock(&clocksource_mutex);
+	return 0;
 }
+fs_initcall(clocksource_done_booting);
 
 /*
  * Enqueue the clocksource sorted by rating
  */
-static int clocksource_enqueue(struct clocksource *c)
+static void clocksource_enqueue(struct clocksource *cs)
 {
-	struct list_head *tmp, *entry = &clocksource_list;
+	struct list_head *entry = &clocksource_list;
+	struct clocksource *tmp;
 
-	list_for_each(tmp, &clocksource_list) {
-		struct clocksource *cs;
-
-		cs = list_entry(tmp, struct clocksource, list);
-		if (cs == c)
-			return -EBUSY;
+	list_for_each_entry(tmp, &clocksource_list, list)
 		/* Keep track of the place, where to insert */
-		if (cs->rating >= c->rating)
-			entry = tmp;
-	}
-	list_add(&c->list, entry);
-
-	if (strlen(c->name) == strlen(override_name) &&
-	    !strcmp(c->name, override_name))
-		clocksource_override = c;
-
-	return 0;
+		if (tmp->rating >= cs->rating)
+			entry = &tmp->list;
+	list_add(&cs->list, entry);
 }
 
 /**
@@ -397,52 +513,48 @@ static int clocksource_enqueue(struct clocksource *c)
  *
  * Returns -EBUSY if registration fails, zero otherwise.
  */
-int clocksource_register(struct clocksource *c)
+int clocksource_register(struct clocksource *cs)
 {
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&clocksource_lock, flags);
-	ret = clocksource_enqueue(c);
-	if (!ret)
-		next_clocksource = select_clocksource();
-	spin_unlock_irqrestore(&clocksource_lock, flags);
-	if (!ret)
-		clocksource_check_watchdog(c);
-	return ret;
+	mutex_lock(&clocksource_mutex);
+	clocksource_enqueue(cs);
+	clocksource_select();
+	clocksource_enqueue_watchdog(cs);
+	mutex_unlock(&clocksource_mutex);
+	return 0;
 }
 EXPORT_SYMBOL(clocksource_register);
 
+static void __clocksource_change_rating(struct clocksource *cs, int rating)
+{
+	list_del(&cs->list);
+	cs->rating = rating;
+	clocksource_enqueue(cs);
+	clocksource_select();
+}
+
 /**
  * clocksource_change_rating - Change the rating of a registered clocksource
- *
  */
 void clocksource_change_rating(struct clocksource *cs, int rating)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocksource_lock, flags);
-	list_del(&cs->list);
-	cs->rating = rating;
-	clocksource_enqueue(cs);
-	next_clocksource = select_clocksource();
-	spin_unlock_irqrestore(&clocksource_lock, flags);
+	mutex_lock(&clocksource_mutex);
+	__clocksource_change_rating(cs, rating);
+	mutex_unlock(&clocksource_mutex);
 }
+EXPORT_SYMBOL(clocksource_change_rating);
 
 /**
  * clocksource_unregister - remove a registered clocksource
  */
 void clocksource_unregister(struct clocksource *cs)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocksource_lock, flags);
+	mutex_lock(&clocksource_mutex);
+	clocksource_dequeue_watchdog(cs);
 	list_del(&cs->list);
-	if (clocksource_override == cs)
-		clocksource_override = NULL;
-	next_clocksource = select_clocksource();
-	spin_unlock_irqrestore(&clocksource_lock, flags);
+	clocksource_select();
+	mutex_unlock(&clocksource_mutex);
 }
+EXPORT_SYMBOL(clocksource_unregister);
 
 #ifdef CONFIG_SYSFS
 /**
@@ -458,9 +570,9 @@ sysfs_show_current_clocksources(struct sys_device *dev,
 {
 	ssize_t count = 0;
 
-	spin_lock_irq(&clocksource_lock);
+	mutex_lock(&clocksource_mutex);
 	count = snprintf(buf, PAGE_SIZE, "%s\n", curr_clocksource->name);
-	spin_unlock_irq(&clocksource_lock);
+	mutex_unlock(&clocksource_mutex);
 
 	return count;
 }
@@ -478,9 +590,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
 					  struct sysdev_attribute *attr,
 					  const char *buf, size_t count)
 {
-	struct clocksource *ovr = NULL;
 	size_t ret = count;
-	int len;
 
 	/* strings from sysfs write are not 0 terminated! */
 	if (count >= sizeof(override_name))
@@ -490,44 +600,14 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
 	if (buf[count-1] == '\n')
 		count--;
 
-	spin_lock_irq(&clocksource_lock);
+	mutex_lock(&clocksource_mutex);
 
 	if (count > 0)
 		memcpy(override_name, buf, count);
 	override_name[count] = 0;
+	clocksource_select();
 
-	len = strlen(override_name);
-	if (len) {
-		struct clocksource *cs;
-
-		ovr = clocksource_override;
-		/* try to select it: */
-		list_for_each_entry(cs, &clocksource_list, list) {
-			if (strlen(cs->name) == len &&
-			    !strcmp(cs->name, override_name))
-				ovr = cs;
-		}
-	}
-
-	/*
-	 * Check to make sure we don't switch to a non-highres capable
-	 * clocksource if the tick code is in oneshot mode (highres or nohz)
-	 */
-	if (tick_oneshot_mode_active() && ovr &&
-	    !(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
-		printk(KERN_WARNING "%s clocksource is not HRT compatible. "
-			"Cannot switch while in HRT/NOHZ mode\n", ovr->name);
-		ovr = NULL;
-		override_name[0] = 0;
-	}
-
-	/* Reselect, when the override name has changed */
-	if (ovr != clocksource_override) {
-		clocksource_override = ovr;
-		next_clocksource = select_clocksource();
-	}
-
-	spin_unlock_irq(&clocksource_lock);
+	mutex_unlock(&clocksource_mutex);
 
 	return ret;
 }
@@ -547,7 +627,7 @@ sysfs_show_available_clocksources(struct sys_device *dev,
 	struct clocksource *src;
 	ssize_t count = 0;
 
-	spin_lock_irq(&clocksource_lock);
+	mutex_lock(&clocksource_mutex);
 	list_for_each_entry(src, &clocksource_list, list) {
 		/*
 		 * Don't show non-HRES clocksource if the tick code is
@@ -559,7 +639,7 @@ sysfs_show_available_clocksources(struct sys_device *dev,
 				  max((ssize_t)PAGE_SIZE - count, (ssize_t)0),
 				  "%s ", src->name);
 	}
-	spin_unlock_irq(&clocksource_lock);
+	mutex_unlock(&clocksource_mutex);
 
 	count += snprintf(buf + count,
 			  max((ssize_t)PAGE_SIZE - count, (ssize_t)0), "\n");
@@ -614,11 +694,10 @@ device_initcall(init_clocksource_sysfs);
  */
 static int __init boot_override_clocksource(char* str)
 {
-	unsigned long flags;
-	spin_lock_irqsave(&clocksource_lock, flags);
+	mutex_lock(&clocksource_mutex);
 	if (str)
 		strlcpy(override_name, str, sizeof(override_name));
-	spin_unlock_irqrestore(&clocksource_lock, flags);
+	mutex_unlock(&clocksource_mutex);
 	return 1;
 }
 
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index c3f6c30816e3..5404a8456909 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -61,7 +61,6 @@ struct clocksource clocksource_jiffies = {
 	.read		= jiffies_read,
 	.mask		= 0xffffffff, /*32bits*/
 	.mult		= NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
-	.mult_orig	= NSEC_PER_JIFFY << JIFFIES_SHIFT,
 	.shift		= JIFFIES_SHIFT,
 };
 
@@ -71,3 +70,8 @@ static int __init init_jiffies_clocksource(void)
 }
 
 core_initcall(init_jiffies_clocksource);
+
+struct clocksource * __init __weak clocksource_default_clock(void)
+{
+	return &clocksource_jiffies;
+}
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 7fc64375ff43..4800f933910e 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -194,8 +194,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
 	case TIME_OK:
 		break;
 	case TIME_INS:
-		xtime.tv_sec--;
-		wall_to_monotonic.tv_sec++;
+		timekeeping_leap_insert(-1);
 		time_state = TIME_OOP;
 		printk(KERN_NOTICE
 			"Clock: inserting leap second 23:59:60 UTC\n");
@@ -203,9 +202,8 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
 		res = HRTIMER_RESTART;
 		break;
 	case TIME_DEL:
-		xtime.tv_sec++;
+		timekeeping_leap_insert(1);
 		time_tai--;
-		wall_to_monotonic.tv_sec--;
 		time_state = TIME_WAIT;
 		printk(KERN_NOTICE
 			"Clock: deleting leap second 23:59:59 UTC\n");
@@ -219,7 +217,6 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
 			time_state = TIME_OK;
 		break;
 	}
-	update_vsyscall(&xtime, clock);
 
 	write_sequnlock(&xtime_lock);
 
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index e8c77d9c633a..fb0f46fa1ecd 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -18,7 +18,117 @@
 #include <linux/jiffies.h>
 #include <linux/time.h>
 #include <linux/tick.h>
+#include <linux/stop_machine.h>
+
+/* Structure holding internal timekeeping values. */
+struct timekeeper {
+	/* Current clocksource used for timekeeping. */
+	struct clocksource *clock;
+	/* The shift value of the current clocksource. */
+	int	shift;
+
+	/* Number of clock cycles in one NTP interval. */
+	cycle_t cycle_interval;
+	/* Number of clock shifted nano seconds in one NTP interval. */
+	u64	xtime_interval;
+	/* Raw nano seconds accumulated per NTP interval. */
+	u32	raw_interval;
+
+	/* Clock shifted nano seconds remainder not stored in xtime.tv_nsec. */
+	u64	xtime_nsec;
+	/* Difference between accumulated time and NTP time in ntp
+	 * shifted nano seconds. */
+	s64	ntp_error;
+	/* Shift conversion between clock shifted nano seconds and
+	 * ntp shifted nano seconds. */
+	int	ntp_error_shift;
+	/* NTP adjusted clock multiplier */
+	u32	mult;
+};
+
+struct timekeeper timekeeper;
+
+/**
+ * timekeeper_setup_internals - Set up internals to use clocksource clock.
+ *
+ * @clock:		Pointer to clocksource.
+ *
+ * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
+ * pair and interval request.
+ *
+ * Unless you're the timekeeping code, you should not be using this!
+ */
+static void timekeeper_setup_internals(struct clocksource *clock)
+{
+	cycle_t interval;
+	u64 tmp;
+
+	timekeeper.clock = clock;
+	clock->cycle_last = clock->read(clock);
 
+	/* Do the ns -> cycle conversion first, using original mult */
+	tmp = NTP_INTERVAL_LENGTH;
+	tmp <<= clock->shift;
+	tmp += clock->mult/2;
+	do_div(tmp, clock->mult);
+	if (tmp == 0)
+		tmp = 1;
+
+	interval = (cycle_t) tmp;
+	timekeeper.cycle_interval = interval;
+
+	/* Go back from cycles -> shifted ns */
+	timekeeper.xtime_interval = (u64) interval * clock->mult;
+	timekeeper.raw_interval =
+		((u64) interval * clock->mult) >> clock->shift;
+
+	timekeeper.xtime_nsec = 0;
+	timekeeper.shift = clock->shift;
+
+	timekeeper.ntp_error = 0;
+	timekeeper.ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;
+
+	/*
+	 * The timekeeper keeps its own mult values for the currently
+	 * active clocksource. These value will be adjusted via NTP
+	 * to counteract clock drifting.
+	 */
+	timekeeper.mult = clock->mult;
+}
+
+/* Timekeeper helper functions. */
+static inline s64 timekeeping_get_ns(void)
+{
+	cycle_t cycle_now, cycle_delta;
+	struct clocksource *clock;
+
+	/* read clocksource: */
+	clock = timekeeper.clock;
+	cycle_now = clock->read(clock);
+
+	/* calculate the delta since the last update_wall_time: */
+	cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
+
+	/* return delta convert to nanoseconds using ntp adjusted mult. */
+	return clocksource_cyc2ns(cycle_delta, timekeeper.mult,
+				  timekeeper.shift);
+}
+
+static inline s64 timekeeping_get_ns_raw(void)
+{
+	cycle_t cycle_now, cycle_delta;
+	struct clocksource *clock;
+
+	/* read clocksource: */
+	clock = timekeeper.clock;
+	cycle_now = clock->read(clock);
+
+	/* calculate the delta since the last update_wall_time: */
+	cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
+
+	/* return delta convert to nanoseconds using ntp adjusted mult. */
+	return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
+}
 
 /*
  * This read-write spinlock protects us from races in SMP while
@@ -44,7 +154,12 @@ __cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);
  */
 struct timespec xtime __attribute__ ((aligned (16)));
 struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
-static unsigned long total_sleep_time;		/* seconds */
+static struct timespec total_sleep_time;
+
+/*
+ * The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock.
+ */
+struct timespec raw_time;
 
 /* flag for if timekeeping is suspended */
 int __read_mostly timekeeping_suspended;
@@ -56,35 +171,44 @@ void update_xtime_cache(u64 nsec)
 	timespec_add_ns(&xtime_cache, nsec);
 }
 
-struct clocksource *clock;
-
+/* must hold xtime_lock */
+void timekeeping_leap_insert(int leapsecond)
+{
+	xtime.tv_sec += leapsecond;
+	wall_to_monotonic.tv_sec -= leapsecond;
+	update_vsyscall(&xtime, timekeeper.clock);
+}
 
 #ifdef CONFIG_GENERIC_TIME
+
 /**
- * clocksource_forward_now - update clock to the current time
+ * timekeeping_forward_now - update clock to the current time
  *
  * Forward the current clock to update its state since the last call to
  * update_wall_time(). This is useful before significant clock changes,
  * as it avoids having to deal with this time offset explicitly.
  */
-static void clocksource_forward_now(void)
+static void timekeeping_forward_now(void)
 {
 	cycle_t cycle_now, cycle_delta;
+	struct clocksource *clock;
 	s64 nsec;
 
-	cycle_now = clocksource_read(clock);
+	clock = timekeeper.clock;
+	cycle_now = clock->read(clock);
 	cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
 	clock->cycle_last = cycle_now;
 
-	nsec = cyc2ns(clock, cycle_delta);
+	nsec = clocksource_cyc2ns(cycle_delta, timekeeper.mult,
+				  timekeeper.shift);
 
 	/* If arch requires, add in gettimeoffset() */
 	nsec += arch_gettimeoffset();
 
 	timespec_add_ns(&xtime, nsec);
 
-	nsec = ((s64)cycle_delta * clock->mult_orig) >> clock->shift;
-	clock->raw_time.tv_nsec += nsec;
+	nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
+	timespec_add_ns(&raw_time, nsec);
 }
 
 /**
@@ -95,7 +219,6 @@ static void clocksource_forward_now(void)
  */
 void getnstimeofday(struct timespec *ts)
 {
-	cycle_t cycle_now, cycle_delta;
 	unsigned long seq;
 	s64 nsecs;
 
@@ -105,15 +228,7 @@ void getnstimeofday(struct timespec *ts)
 		seq = read_seqbegin(&xtime_lock);
 
 		*ts = xtime;
-
-		/* read clocksource: */
-		cycle_now = clocksource_read(clock);
-
-		/* calculate the delta since the last update_wall_time: */
-		cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
-
-		/* convert to nanoseconds: */
-		nsecs = cyc2ns(clock, cycle_delta);
+		nsecs = timekeeping_get_ns();
 
 		/* If arch requires, add in gettimeoffset() */
 		nsecs += arch_gettimeoffset();
@@ -125,6 +240,57 @@ void getnstimeofday(struct timespec *ts)
 
 EXPORT_SYMBOL(getnstimeofday);
 
+ktime_t ktime_get(void)
+{
+	unsigned int seq;
+	s64 secs, nsecs;
+
+	WARN_ON(timekeeping_suspended);
+
+	do {
+		seq = read_seqbegin(&xtime_lock);
+		secs = xtime.tv_sec + wall_to_monotonic.tv_sec;
+		nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec;
+		nsecs += timekeeping_get_ns();
+
+	} while (read_seqretry(&xtime_lock, seq));
+	/*
+	 * Use ktime_set/ktime_add_ns to create a proper ktime on
+	 * 32-bit architectures without CONFIG_KTIME_SCALAR.
+	 */
+	return ktime_add_ns(ktime_set(secs, 0), nsecs);
+}
+EXPORT_SYMBOL_GPL(ktime_get);
+
+/**
+ * ktime_get_ts - get the monotonic clock in timespec format
+ * @ts:		pointer to timespec variable
+ *
+ * The function calculates the monotonic clock from the realtime
+ * clock and the wall_to_monotonic offset and stores the result
+ * in normalized timespec format in the variable pointed to by @ts.
+ */
+void ktime_get_ts(struct timespec *ts)
+{
+	struct timespec tomono;
+	unsigned int seq;
+	s64 nsecs;
+
+	WARN_ON(timekeeping_suspended);
+
+	do {
+		seq = read_seqbegin(&xtime_lock);
+		*ts = xtime;
+		tomono = wall_to_monotonic;
+		nsecs = timekeeping_get_ns();
+
+	} while (read_seqretry(&xtime_lock, seq));
+
+	set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
+				ts->tv_nsec + tomono.tv_nsec + nsecs);
+}
+EXPORT_SYMBOL_GPL(ktime_get_ts);
+
 /**
  * do_gettimeofday - Returns the time of day in a timeval
  * @tv:		pointer to the timeval to be set
@@ -157,7 +323,7 @@ int do_settimeofday(struct timespec *tv)
 
 	write_seqlock_irqsave(&xtime_lock, flags);
 
-	clocksource_forward_now();
+	timekeeping_forward_now();
 
 	ts_delta.tv_sec = tv->tv_sec - xtime.tv_sec;
 	ts_delta.tv_nsec = tv->tv_nsec - xtime.tv_nsec;
@@ -167,10 +333,10 @@ int do_settimeofday(struct timespec *tv)
 
 	update_xtime_cache(0);
 
-	clock->error = 0;
+	timekeeper.ntp_error = 0;
 	ntp_clear();
 
-	update_vsyscall(&xtime, clock);
+	update_vsyscall(&xtime, timekeeper.clock);
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
@@ -187,44 +353,97 @@ EXPORT_SYMBOL(do_settimeofday);
  *
  * Accumulates current time interval and initializes new clocksource
  */
-static void change_clocksource(void)
+static int change_clocksource(void *data)
 {
 	struct clocksource *new, *old;
 
-	new = clocksource_get_next();
+	new = (struct clocksource *) data;
+
+	timekeeping_forward_now();
+	if (!new->enable || new->enable(new) == 0) {
+		old = timekeeper.clock;
+		timekeeper_setup_internals(new);
+		if (old->disable)
+			old->disable(old);
+	}
+	return 0;
+}
 
-	if (clock == new)
+/**
+ * timekeeping_notify - Install a new clock source
+ * @clock:		pointer to the clock source
+ *
+ * This function is called from clocksource.c after a new, better clock
+ * source has been registered. The caller holds the clocksource_mutex.
+ */
+void timekeeping_notify(struct clocksource *clock)
+{
+	if (timekeeper.clock == clock)
 		return;
+	stop_machine(change_clocksource, clock, NULL);
+	tick_clock_notify();
+}
 
-	clocksource_forward_now();
+#else /* GENERIC_TIME */
 
-	if (clocksource_enable(new))
-		return;
+static inline void timekeeping_forward_now(void) { }
 
-	new->raw_time = clock->raw_time;
-	old = clock;
-	clock = new;
-	clocksource_disable(old);
+/**
+ * ktime_get - get the monotonic time in ktime_t format
+ *
+ * returns the time in ktime_t format
+ */
+ktime_t ktime_get(void)
+{
+	struct timespec now;
 
-	clock->cycle_last = 0;
-	clock->cycle_last = clocksource_read(clock);
-	clock->error = 0;
-	clock->xtime_nsec = 0;
-	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
+	ktime_get_ts(&now);
 
-	tick_clock_notify();
+	return timespec_to_ktime(now);
+}
+EXPORT_SYMBOL_GPL(ktime_get);
 
-	/*
-	 * We're holding xtime lock and waking up klogd would deadlock
-	 * us on enqueue.  So no printing!
-	printk(KERN_INFO "Time: %s clocksource has been installed.\n",
-	       clock->name);
-	 */
+/**
+ * ktime_get_ts - get the monotonic clock in timespec format
+ * @ts:		pointer to timespec variable
+ *
+ * The function calculates the monotonic clock from the realtime
+ * clock and the wall_to_monotonic offset and stores the result
+ * in normalized timespec format in the variable pointed to by @ts.
+ */
+void ktime_get_ts(struct timespec *ts)
+{
+	struct timespec tomono;
+	unsigned long seq;
+
+	do {
+		seq = read_seqbegin(&xtime_lock);
+		getnstimeofday(ts);
+		tomono = wall_to_monotonic;
+
+	} while (read_seqretry(&xtime_lock, seq));
+
+	set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
+				ts->tv_nsec + tomono.tv_nsec);
 }
-#else
-static inline void clocksource_forward_now(void) { }
-static inline void change_clocksource(void) { }
-#endif
+EXPORT_SYMBOL_GPL(ktime_get_ts);
+
+#endif /* !GENERIC_TIME */
+
+/**
+ * ktime_get_real - get the real (wall-) time in ktime_t format
+ *
+ * returns the time in ktime_t format
+ */
+ktime_t ktime_get_real(void)
+{
+	struct timespec now;
+
+	getnstimeofday(&now);
+
+	return timespec_to_ktime(now);
+}
+EXPORT_SYMBOL_GPL(ktime_get_real);
 
 /**
  * getrawmonotonic - Returns the raw monotonic time in a timespec
@@ -236,21 +455,11 @@ void getrawmonotonic(struct timespec *ts)
 {
 	unsigned long seq;
 	s64 nsecs;
-	cycle_t cycle_now, cycle_delta;
 
 	do {
 		seq = read_seqbegin(&xtime_lock);
-
-		/* read clocksource: */
-		cycle_now = clocksource_read(clock);
-
-		/* calculate the delta since the last update_wall_time: */
-		cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
-
-		/* convert to nanoseconds: */
-		nsecs = ((s64)cycle_delta * clock->mult_orig) >> clock->shift;
-
-		*ts = clock->raw_time;
+		nsecs = timekeeping_get_ns_raw();
+		*ts = raw_time;
 
 	} while (read_seqretry(&xtime_lock, seq));
 
@@ -270,7 +479,7 @@ int timekeeping_valid_for_hres(void)
 	do {
 		seq = read_seqbegin(&xtime_lock);
 
-		ret = clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
+		ret = timekeeper.clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
 
 	} while (read_seqretry(&xtime_lock, seq));
 
@@ -278,17 +487,33 @@ int timekeeping_valid_for_hres(void)
 }
 
 /**
- * read_persistent_clock -  Return time in seconds from the persistent clock.
+ * read_persistent_clock -  Return time from the persistent clock.
  *
  * Weak dummy function for arches that do not yet support it.
- * Returns seconds from epoch using the battery backed persistent clock.
- * Returns zero if unsupported.
+ * Reads the time from the battery backed persistent clock.
+ * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
  *
  *  XXX - Do be sure to remove it once all arches implement it.
  */
-unsigned long __attribute__((weak)) read_persistent_clock(void)
+void __attribute__((weak)) read_persistent_clock(struct timespec *ts)
 {
-	return 0;
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
+}
+
+/**
+ * read_boot_clock -  Return time of the system start.
+ *
+ * Weak dummy function for arches that do not yet support it.
+ * Function to read the exact time the system has been started.
+ * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
+ *
+ *  XXX - Do be sure to remove it once all arches implement it.
+ */
+void __attribute__((weak)) read_boot_clock(struct timespec *ts)
+{
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
 }
 
 /*
@@ -296,29 +521,40 @@ unsigned long __attribute__((weak)) read_persistent_clock(void)
  */
 void __init timekeeping_init(void)
 {
+	struct clocksource *clock;
 	unsigned long flags;
-	unsigned long sec = read_persistent_clock();
+	struct timespec now, boot;
+
+	read_persistent_clock(&now);
+	read_boot_clock(&boot);
 
 	write_seqlock_irqsave(&xtime_lock, flags);
 
 	ntp_init();
 
-	clock = clocksource_get_next();
-	clocksource_enable(clock);
-	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
-	clock->cycle_last = clocksource_read(clock);
-
-	xtime.tv_sec = sec;
-	xtime.tv_nsec = 0;
+	clock = clocksource_default_clock();
+	if (clock->enable)
+		clock->enable(clock);
+	timekeeper_setup_internals(clock);
+
+	xtime.tv_sec = now.tv_sec;
+	xtime.tv_nsec = now.tv_nsec;
+	raw_time.tv_sec = 0;
+	raw_time.tv_nsec = 0;
+	if (boot.tv_sec == 0 && boot.tv_nsec == 0) {
+		boot.tv_sec = xtime.tv_sec;
+		boot.tv_nsec = xtime.tv_nsec;
+	}
 	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
+				-boot.tv_sec, -boot.tv_nsec);
 	update_xtime_cache(0);
-	total_sleep_time = 0;
+	total_sleep_time.tv_sec = 0;
+	total_sleep_time.tv_nsec = 0;
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 }
 
 /* time in seconds when suspend began */
-static unsigned long timekeeping_suspend_time;
+static struct timespec timekeeping_suspend_time;
 
 /**
  * timekeeping_resume - Resumes the generic timekeeping subsystem.
@@ -331,24 +567,24 @@ static unsigned long timekeeping_suspend_time;
 static int timekeeping_resume(struct sys_device *dev)
 {
 	unsigned long flags;
-	unsigned long now = read_persistent_clock();
+	struct timespec ts;
+
+	read_persistent_clock(&ts);
 
 	clocksource_resume();
 
 	write_seqlock_irqsave(&xtime_lock, flags);
 
-	if (now && (now > timekeeping_suspend_time)) {
-		unsigned long sleep_length = now - timekeeping_suspend_time;
-
-		xtime.tv_sec += sleep_length;
-		wall_to_monotonic.tv_sec -= sleep_length;
-		total_sleep_time += sleep_length;
+	if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
+		ts = timespec_sub(ts, timekeeping_suspend_time);
+		xtime = timespec_add_safe(xtime, ts);
+		wall_to_monotonic = timespec_sub(wall_to_monotonic, ts);
+		total_sleep_time = timespec_add_safe(total_sleep_time, ts);
 	}
 	update_xtime_cache(0);
 	/* re-base the last cycle value */
-	clock->cycle_last = 0;
-	clock->cycle_last = clocksource_read(clock);
-	clock->error = 0;
+	timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
+	timekeeper.ntp_error = 0;
 	timekeeping_suspended = 0;
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
@@ -366,10 +602,10 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
 {
 	unsigned long flags;
 
-	timekeeping_suspend_time = read_persistent_clock();
+	read_persistent_clock(&timekeeping_suspend_time);
 
 	write_seqlock_irqsave(&xtime_lock, flags);
-	clocksource_forward_now();
+	timekeeping_forward_now();
 	timekeeping_suspended = 1;
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
@@ -404,7 +640,7 @@ device_initcall(timekeeping_init_device);
  * If the error is already larger, we look ahead even further
  * to compensate for late or lost adjustments.
  */
-static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
+static __always_inline int timekeeping_bigadjust(s64 error, s64 *interval,
 						 s64 *offset)
 {
 	s64 tick_error, i;
@@ -420,7 +656,7 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
 	 * here.  This is tuned so that an error of about 1 msec is adjusted
 	 * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
 	 */
-	error2 = clock->error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
+	error2 = timekeeper.ntp_error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
 	error2 = abs(error2);
 	for (look_ahead = 0; error2 > 0; look_ahead++)
 		error2 >>= 2;
@@ -429,8 +665,8 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
 	 * Now calculate the error in (1 << look_ahead) ticks, but first
 	 * remove the single look ahead already included in the error.
 	 */
-	tick_error = tick_length >> (NTP_SCALE_SHIFT - clock->shift + 1);
-	tick_error -= clock->xtime_interval >> 1;
+	tick_error = tick_length >> (timekeeper.ntp_error_shift + 1);
+	tick_error -= timekeeper.xtime_interval >> 1;
 	error = ((error - tick_error) >> look_ahead) + tick_error;
 
 	/* Finally calculate the adjustment shift value.  */
@@ -455,18 +691,18 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
  * this is optimized for the most common adjustments of -1,0,1,
  * for other values we can do a bit more work.
  */
-static void clocksource_adjust(s64 offset)
+static void timekeeping_adjust(s64 offset)
 {
-	s64 error, interval = clock->cycle_interval;
+	s64 error, interval = timekeeper.cycle_interval;
 	int adj;
 
-	error = clock->error >> (NTP_SCALE_SHIFT - clock->shift - 1);
+	error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1);
 	if (error > interval) {
 		error >>= 2;
 		if (likely(error <= interval))
 			adj = 1;
 		else
-			adj = clocksource_bigadjust(error, &interval, &offset);
+			adj = timekeeping_bigadjust(error, &interval, &offset);
 	} else if (error < -interval) {
 		error >>= 2;
 		if (likely(error >= -interval)) {
@@ -474,15 +710,15 @@ static void clocksource_adjust(s64 offset)
 			interval = -interval;
 			offset = -offset;
 		} else
-			adj = clocksource_bigadjust(error, &interval, &offset);
+			adj = timekeeping_bigadjust(error, &interval, &offset);
 	} else
 		return;
 
-	clock->mult += adj;
-	clock->xtime_interval += interval;
-	clock->xtime_nsec -= offset;
-	clock->error -= (interval - offset) <<
-			(NTP_SCALE_SHIFT - clock->shift);
+	timekeeper.mult += adj;
+	timekeeper.xtime_interval += interval;
+	timekeeper.xtime_nsec -= offset;
+	timekeeper.ntp_error -= (interval - offset) <<
+				timekeeper.ntp_error_shift;
 }
 
 /**
@@ -492,53 +728,59 @@ static void clocksource_adjust(s64 offset)
  */
 void update_wall_time(void)
 {
+	struct clocksource *clock;
 	cycle_t offset;
+	u64 nsecs;
 
 	/* Make sure we're fully resumed: */
 	if (unlikely(timekeeping_suspended))
 		return;
 
+	clock = timekeeper.clock;
 #ifdef CONFIG_GENERIC_TIME
-	offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
+	offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
 #else
-	offset = clock->cycle_interval;
+	offset = timekeeper.cycle_interval;
 #endif
-	clock->xtime_nsec = (s64)xtime.tv_nsec << clock->shift;
+	timekeeper.xtime_nsec = (s64)xtime.tv_nsec << timekeeper.shift;
 
 	/* normally this loop will run just once, however in the
 	 * case of lost or late ticks, it will accumulate correctly.
 	 */
-	while (offset >= clock->cycle_interval) {
+	while (offset >= timekeeper.cycle_interval) {
+		u64 nsecps = (u64)NSEC_PER_SEC << timekeeper.shift;
+
 		/* accumulate one interval */
-		offset -= clock->cycle_interval;
-		clock->cycle_last += clock->cycle_interval;
+		offset -= timekeeper.cycle_interval;
+		clock->cycle_last += timekeeper.cycle_interval;
 
-		clock->xtime_nsec += clock->xtime_interval;
-		if (clock->xtime_nsec >= (u64)NSEC_PER_SEC << clock->shift) {
-			clock->xtime_nsec -= (u64)NSEC_PER_SEC << clock->shift;
+		timekeeper.xtime_nsec += timekeeper.xtime_interval;
+		if (timekeeper.xtime_nsec >= nsecps) {
+			timekeeper.xtime_nsec -= nsecps;
 			xtime.tv_sec++;
 			second_overflow();
 		}
 
-		clock->raw_time.tv_nsec += clock->raw_interval;
-		if (clock->raw_time.tv_nsec >= NSEC_PER_SEC) {
-			clock->raw_time.tv_nsec -= NSEC_PER_SEC;
-			clock->raw_time.tv_sec++;
+		raw_time.tv_nsec += timekeeper.raw_interval;
+		if (raw_time.tv_nsec >= NSEC_PER_SEC) {
+			raw_time.tv_nsec -= NSEC_PER_SEC;
+			raw_time.tv_sec++;
 		}
 
 		/* accumulate error between NTP and clock interval */
-		clock->error += tick_length;
-		clock->error -= clock->xtime_interval << (NTP_SCALE_SHIFT - clock->shift);
+		timekeeper.ntp_error += tick_length;
+		timekeeper.ntp_error -= timekeeper.xtime_interval <<
+					timekeeper.ntp_error_shift;
 	}
 
 	/* correct the clock when NTP error is too big */
-	clocksource_adjust(offset);
+	timekeeping_adjust(offset);
 
 	/*
 	 * Since in the loop above, we accumulate any amount of time
 	 * in xtime_nsec over a second into xtime.tv_sec, its possible for
 	 * xtime_nsec to be fairly small after the loop. Further, if we're
-	 * slightly speeding the clocksource up in clocksource_adjust(),
+	 * slightly speeding the clocksource up in timekeeping_adjust(),
 	 * its possible the required corrective factor to xtime_nsec could
 	 * cause it to underflow.
 	 *
@@ -550,24 +792,25 @@ void update_wall_time(void)
 	 * We'll correct this error next time through this function, when
 	 * xtime_nsec is not as small.
 	 */
-	if (unlikely((s64)clock->xtime_nsec < 0)) {
-		s64 neg = -(s64)clock->xtime_nsec;
-		clock->xtime_nsec = 0;
-		clock->error += neg << (NTP_SCALE_SHIFT - clock->shift);
+	if (unlikely((s64)timekeeper.xtime_nsec < 0)) {
+		s64 neg = -(s64)timekeeper.xtime_nsec;
+		timekeeper.xtime_nsec = 0;
+		timekeeper.ntp_error += neg << timekeeper.ntp_error_shift;
 	}
 
 	/* store full nanoseconds into xtime after rounding it up and
 	 * add the remainder to the error difference.
 	 */
-	xtime.tv_nsec = ((s64)clock->xtime_nsec >> clock->shift) + 1;
-	clock->xtime_nsec -= (s64)xtime.tv_nsec << clock->shift;
-	clock->error += clock->xtime_nsec << (NTP_SCALE_SHIFT - clock->shift);
+	xtime.tv_nsec =	((s64) timekeeper.xtime_nsec >> timekeeper.shift) + 1;
+	timekeeper.xtime_nsec -= (s64) xtime.tv_nsec << timekeeper.shift;
+	timekeeper.ntp_error +=	timekeeper.xtime_nsec <<
+				timekeeper.ntp_error_shift;
 
-	update_xtime_cache(cyc2ns(clock, offset));
+	nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift);
+	update_xtime_cache(nsecs);
 
 	/* check to see if there is a new clocksource to use */
-	change_clocksource();
-	update_vsyscall(&xtime, clock);
+	update_vsyscall(&xtime, timekeeper.clock);
 }
 
 /**
@@ -583,9 +826,12 @@ void update_wall_time(void)
  */
 void getboottime(struct timespec *ts)
 {
-	set_normalized_timespec(ts,
-		- (wall_to_monotonic.tv_sec + total_sleep_time),
-		- wall_to_monotonic.tv_nsec);
+	struct timespec boottime = {
+		.tv_sec = wall_to_monotonic.tv_sec + total_sleep_time.tv_sec,
+		.tv_nsec = wall_to_monotonic.tv_nsec + total_sleep_time.tv_nsec
+	};
+
+	set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec);
 }
 
 /**
@@ -594,7 +840,7 @@ void getboottime(struct timespec *ts)
  */
 void monotonic_to_bootbased(struct timespec *ts)
 {
-	ts->tv_sec += total_sleep_time;
+	*ts = timespec_add_safe(*ts, total_sleep_time);
 }
 
 unsigned long get_seconds(void)
@@ -603,6 +849,10 @@ unsigned long get_seconds(void)
 }
 EXPORT_SYMBOL(get_seconds);
 
+struct timespec __current_kernel_time(void)
+{
+	return xtime_cache;
+}
 
 struct timespec current_kernel_time(void)
 {
@@ -618,3 +868,20 @@ struct timespec current_kernel_time(void)
 	return now;
 }
 EXPORT_SYMBOL(current_kernel_time);
+
+struct timespec get_monotonic_coarse(void)
+{
+	struct timespec now, mono;
+	unsigned long seq;
+
+	do {
+		seq = read_seqbegin(&xtime_lock);
+
+		now = xtime_cache;
+		mono = wall_to_monotonic;
+	} while (read_seqretry(&xtime_lock, seq));
+
+	set_normalized_timespec(&now, now.tv_sec + mono.tv_sec,
+				now.tv_nsec + mono.tv_nsec);
+	return now;
+}
diff --git a/kernel/timer.c b/kernel/timer.c
index a3d25f415019..bbb51074680e 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -72,6 +72,7 @@ struct tvec_base {
 	spinlock_t lock;
 	struct timer_list *running_timer;
 	unsigned long timer_jiffies;
+	unsigned long next_timer;
 	struct tvec_root tv1;
 	struct tvec tv2;
 	struct tvec tv3;
@@ -622,6 +623,9 @@ __mod_timer(struct timer_list *timer, unsigned long expires,
 
 	if (timer_pending(timer)) {
 		detach_timer(timer, 0);
+		if (timer->expires == base->next_timer &&
+		    !tbase_get_deferrable(timer->base))
+			base->next_timer = base->timer_jiffies;
 		ret = 1;
 	} else {
 		if (pending_only)
@@ -663,6 +667,9 @@ __mod_timer(struct timer_list *timer, unsigned long expires,
 	}
 
 	timer->expires = expires;
+	if (time_before(timer->expires, base->next_timer) &&
+	    !tbase_get_deferrable(timer->base))
+		base->next_timer = timer->expires;
 	internal_add_timer(base, timer);
 
 out_unlock:
@@ -781,6 +788,9 @@ void add_timer_on(struct timer_list *timer, int cpu)
 	spin_lock_irqsave(&base->lock, flags);
 	timer_set_base(timer, base);
 	debug_timer_activate(timer);
+	if (time_before(timer->expires, base->next_timer) &&
+	    !tbase_get_deferrable(timer->base))
+		base->next_timer = timer->expires;
 	internal_add_timer(base, timer);
 	/*
 	 * Check whether the other CPU is idle and needs to be
@@ -817,6 +827,9 @@ int del_timer(struct timer_list *timer)
 		base = lock_timer_base(timer, &flags);
 		if (timer_pending(timer)) {
 			detach_timer(timer, 1);
+			if (timer->expires == base->next_timer &&
+			    !tbase_get_deferrable(timer->base))
+				base->next_timer = base->timer_jiffies;
 			ret = 1;
 		}
 		spin_unlock_irqrestore(&base->lock, flags);
@@ -850,6 +863,9 @@ int try_to_del_timer_sync(struct timer_list *timer)
 	ret = 0;
 	if (timer_pending(timer)) {
 		detach_timer(timer, 1);
+		if (timer->expires == base->next_timer &&
+		    !tbase_get_deferrable(timer->base))
+			base->next_timer = base->timer_jiffies;
 		ret = 1;
 	}
 out:
@@ -1007,8 +1023,8 @@ static inline void __run_timers(struct tvec_base *base)
 #ifdef CONFIG_NO_HZ
 /*
  * Find out when the next timer event is due to happen. This
- * is used on S/390 to stop all activity when a cpus is idle.
- * This functions needs to be called disabled.
+ * is used on S/390 to stop all activity when a CPU is idle.
+ * This function needs to be called with interrupts disabled.
  */
 static unsigned long __next_timer_interrupt(struct tvec_base *base)
 {
@@ -1134,7 +1150,9 @@ unsigned long get_next_timer_interrupt(unsigned long now)
 	unsigned long expires;
 
 	spin_lock(&base->lock);
-	expires = __next_timer_interrupt(base);
+	if (time_before_eq(base->next_timer, base->timer_jiffies))
+		base->next_timer = __next_timer_interrupt(base);
+	expires = base->next_timer;
 	spin_unlock(&base->lock);
 
 	if (time_before_eq(expires, now))
@@ -1522,6 +1540,7 @@ static int __cpuinit init_timers_cpu(int cpu)
 		INIT_LIST_HEAD(base->tv1.vec + j);
 
 	base->timer_jiffies = jiffies;
+	base->next_timer = base->timer_jiffies;
 	return 0;
 }
 
@@ -1534,6 +1553,9 @@ static void migrate_timer_list(struct tvec_base *new_base, struct list_head *hea
 		timer = list_first_entry(head, struct timer_list, entry);
 		detach_timer(timer, 0);
 		timer_set_base(timer, new_base);
+		if (time_before(timer->expires, new_base->next_timer) &&
+		    !tbase_get_deferrable(timer->base))
+			new_base->next_timer = timer->expires;
 		internal_add_timer(new_base, timer);
 	}
 }
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 1ea0d1234f4a..e71634604400 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -11,12 +11,18 @@ config NOP_TRACER
 
 config HAVE_FTRACE_NMI_ENTER
 	bool
+	help
+	  See Documentation/trace/ftrace-implementation.txt
 
 config HAVE_FUNCTION_TRACER
 	bool
+	help
+	  See Documentation/trace/ftrace-implementation.txt
 
 config HAVE_FUNCTION_GRAPH_TRACER
 	bool
+	help
+	  See Documentation/trace/ftrace-implementation.txt
 
 config HAVE_FUNCTION_GRAPH_FP_TEST
 	bool
@@ -28,21 +34,25 @@ config HAVE_FUNCTION_GRAPH_FP_TEST
 config HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	bool
 	help
-	 This gets selected when the arch tests the function_trace_stop
-	 variable at the mcount call site. Otherwise, this variable
-	 is tested by the called function.
+	  See Documentation/trace/ftrace-implementation.txt
 
 config HAVE_DYNAMIC_FTRACE
 	bool
+	help
+	  See Documentation/trace/ftrace-implementation.txt
 
 config HAVE_FTRACE_MCOUNT_RECORD
 	bool
+	help
+	  See Documentation/trace/ftrace-implementation.txt
 
 config HAVE_HW_BRANCH_TRACER
 	bool
 
 config HAVE_SYSCALL_TRACEPOINTS
 	bool
+	help
+	  See Documentation/trace/ftrace-implementation.txt
 
 config TRACER_MAX_TRACE
 	bool
@@ -469,6 +479,18 @@ config FTRACE_STARTUP_TEST
 	  functioning properly. It will do tests on all the configured
 	  tracers of ftrace.
 
+config EVENT_TRACE_TEST_SYSCALLS
+	bool "Run selftest on syscall events"
+	depends on FTRACE_STARTUP_TEST
+	help
+	 This option will also enable testing every syscall event.
+	 It only enables the event and disables it and runs various loads
+	 with the event enabled. This adds a bit more time for kernel boot
+	 up since it runs this on every system call defined.
+
+	 TBD - enable a way to actually call the syscalls as we test their
+	       events
+
 config MMIOTRACE
 	bool "Memory mapped IO tracing"
 	depends on HAVE_MMIOTRACE_SUPPORT && PCI
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 8c804e24f96f..cc615f84751b 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1323,11 +1323,10 @@ static int __init ftrace_dyn_table_alloc(unsigned long num_to_init)
 
 enum {
 	FTRACE_ITER_FILTER	= (1 << 0),
-	FTRACE_ITER_CONT	= (1 << 1),
-	FTRACE_ITER_NOTRACE	= (1 << 2),
-	FTRACE_ITER_FAILURES	= (1 << 3),
-	FTRACE_ITER_PRINTALL	= (1 << 4),
-	FTRACE_ITER_HASH	= (1 << 5),
+	FTRACE_ITER_NOTRACE	= (1 << 1),
+	FTRACE_ITER_FAILURES	= (1 << 2),
+	FTRACE_ITER_PRINTALL	= (1 << 3),
+	FTRACE_ITER_HASH	= (1 << 4),
 };
 
 #define FTRACE_BUFF_MAX (KSYM_SYMBOL_LEN+4) /* room for wildcards */
@@ -1337,8 +1336,7 @@ struct ftrace_iterator {
 	int			hidx;
 	int			idx;
 	unsigned		flags;
-	unsigned char		buffer[FTRACE_BUFF_MAX+1];
-	unsigned		buffer_idx;
+	struct trace_parser	parser;
 };
 
 static void *
@@ -1407,7 +1405,7 @@ static int t_hash_show(struct seq_file *m, void *v)
 	if (rec->ops->print)
 		return rec->ops->print(m, rec->ip, rec->ops, rec->data);
 
-	seq_printf(m, "%pf:%pf", (void *)rec->ip, (void *)rec->ops->func);
+	seq_printf(m, "%ps:%ps", (void *)rec->ip, (void *)rec->ops->func);
 
 	if (rec->data)
 		seq_printf(m, ":%p", rec->data);
@@ -1517,7 +1515,7 @@ static int t_show(struct seq_file *m, void *v)
 	if (!rec)
 		return 0;
 
-	seq_printf(m, "%pf\n", (void *)rec->ip);
+	seq_printf(m, "%ps\n", (void *)rec->ip);
 
 	return 0;
 }
@@ -1604,6 +1602,11 @@ ftrace_regex_open(struct inode *inode, struct file *file, int enable)
 	if (!iter)
 		return -ENOMEM;
 
+	if (trace_parser_get_init(&iter->parser, FTRACE_BUFF_MAX)) {
+		kfree(iter);
+		return -ENOMEM;
+	}
+
 	mutex_lock(&ftrace_regex_lock);
 	if ((file->f_mode & FMODE_WRITE) &&
 	    (file->f_flags & O_TRUNC))
@@ -2059,9 +2062,9 @@ __unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
 	int i, len = 0;
 	char *search;
 
-	if (glob && (strcmp(glob, "*") || !strlen(glob)))
+	if (glob && (strcmp(glob, "*") == 0 || !strlen(glob)))
 		glob = NULL;
-	else {
+	else if (glob) {
 		int not;
 
 		type = ftrace_setup_glob(glob, strlen(glob), &search, &not);
@@ -2196,9 +2199,8 @@ ftrace_regex_write(struct file *file, const char __user *ubuf,
 		   size_t cnt, loff_t *ppos, int enable)
 {
 	struct ftrace_iterator *iter;
-	char ch;
-	size_t read = 0;
-	ssize_t ret;
+	struct trace_parser *parser;
+	ssize_t ret, read;
 
 	if (!cnt || cnt < 0)
 		return 0;
@@ -2211,72 +2213,23 @@ ftrace_regex_write(struct file *file, const char __user *ubuf,
 	} else
 		iter = file->private_data;
 
-	if (!*ppos) {
-		iter->flags &= ~FTRACE_ITER_CONT;
-		iter->buffer_idx = 0;
-	}
-
-	ret = get_user(ch, ubuf++);
-	if (ret)
-		goto out;
-	read++;
-	cnt--;
+	parser = &iter->parser;
+	read = trace_get_user(parser, ubuf, cnt, ppos);
 
-	/*
-	 * If the parser haven't finished with the last write,
-	 * continue reading the user input without skipping spaces.
-	 */
-	if (!(iter->flags & FTRACE_ITER_CONT)) {
-		/* skip white space */
-		while (cnt && isspace(ch)) {
-			ret = get_user(ch, ubuf++);
-			if (ret)
-				goto out;
-			read++;
-			cnt--;
-		}
-
-		/* only spaces were written */
-		if (isspace(ch)) {
-			*ppos += read;
-			ret = read;
-			goto out;
-		}
-
-		iter->buffer_idx = 0;
-	}
-
-	while (cnt && !isspace(ch)) {
-		if (iter->buffer_idx < FTRACE_BUFF_MAX)
-			iter->buffer[iter->buffer_idx++] = ch;
-		else {
-			ret = -EINVAL;
-			goto out;
-		}
-		ret = get_user(ch, ubuf++);
+	if (trace_parser_loaded(parser) &&
+	    !trace_parser_cont(parser)) {
+		ret = ftrace_process_regex(parser->buffer,
+					   parser->idx, enable);
 		if (ret)
 			goto out;
-		read++;
-		cnt--;
-	}
 
-	if (isspace(ch)) {
-		iter->buffer[iter->buffer_idx] = 0;
-		ret = ftrace_process_regex(iter->buffer,
-					   iter->buffer_idx, enable);
-		if (ret)
-			goto out;
-		iter->buffer_idx = 0;
-	} else {
-		iter->flags |= FTRACE_ITER_CONT;
-		iter->buffer[iter->buffer_idx++] = ch;
+		trace_parser_clear(parser);
 	}
 
-	*ppos += read;
 	ret = read;
- out:
-	mutex_unlock(&ftrace_regex_lock);
 
+	mutex_unlock(&ftrace_regex_lock);
+out:
 	return ret;
 }
 
@@ -2381,6 +2334,7 @@ ftrace_regex_release(struct inode *inode, struct file *file, int enable)
 {
 	struct seq_file *m = (struct seq_file *)file->private_data;
 	struct ftrace_iterator *iter;
+	struct trace_parser *parser;
 
 	mutex_lock(&ftrace_regex_lock);
 	if (file->f_mode & FMODE_READ) {
@@ -2390,9 +2344,10 @@ ftrace_regex_release(struct inode *inode, struct file *file, int enable)
 	} else
 		iter = file->private_data;
 
-	if (iter->buffer_idx) {
-		iter->buffer[iter->buffer_idx] = 0;
-		ftrace_match_records(iter->buffer, iter->buffer_idx, enable);
+	parser = &iter->parser;
+	if (trace_parser_loaded(parser)) {
+		parser->buffer[parser->idx] = 0;
+		ftrace_match_records(parser->buffer, parser->idx, enable);
 	}
 
 	mutex_lock(&ftrace_lock);
@@ -2400,7 +2355,9 @@ ftrace_regex_release(struct inode *inode, struct file *file, int enable)
 		ftrace_run_update_code(FTRACE_ENABLE_CALLS);
 	mutex_unlock(&ftrace_lock);
 
+	trace_parser_put(parser);
 	kfree(iter);
+
 	mutex_unlock(&ftrace_regex_lock);
 	return 0;
 }
@@ -2499,7 +2456,7 @@ static int g_show(struct seq_file *m, void *v)
 		return 0;
 	}
 
-	seq_printf(m, "%pf\n", v);
+	seq_printf(m, "%ps\n", (void *)*ptr);
 
 	return 0;
 }
@@ -2602,12 +2559,10 @@ static ssize_t
 ftrace_graph_write(struct file *file, const char __user *ubuf,
 		   size_t cnt, loff_t *ppos)
 {
-	unsigned char buffer[FTRACE_BUFF_MAX+1];
+	struct trace_parser parser;
 	unsigned long *array;
 	size_t read = 0;
 	ssize_t ret;
-	int index = 0;
-	char ch;
 
 	if (!cnt || cnt < 0)
 		return 0;
@@ -2625,51 +2580,26 @@ ftrace_graph_write(struct file *file, const char __user *ubuf,
 	} else
 		array = file->private_data;
 
-	ret = get_user(ch, ubuf++);
-	if (ret)
+	if (trace_parser_get_init(&parser, FTRACE_BUFF_MAX)) {
+		ret = -ENOMEM;
 		goto out;
-	read++;
-	cnt--;
-
-	/* skip white space */
-	while (cnt && isspace(ch)) {
-		ret = get_user(ch, ubuf++);
-		if (ret)
-			goto out;
-		read++;
-		cnt--;
 	}
 
-	if (isspace(ch)) {
-		*ppos += read;
-		ret = read;
-		goto out;
-	}
+	read = trace_get_user(&parser, ubuf, cnt, ppos);
 
-	while (cnt && !isspace(ch)) {
-		if (index < FTRACE_BUFF_MAX)
-			buffer[index++] = ch;
-		else {
-			ret = -EINVAL;
-			goto out;
-		}
-		ret = get_user(ch, ubuf++);
+	if (trace_parser_loaded((&parser))) {
+		parser.buffer[parser.idx] = 0;
+
+		/* we allow only one expression at a time */
+		ret = ftrace_set_func(array, &ftrace_graph_count,
+					parser.buffer);
 		if (ret)
 			goto out;
-		read++;
-		cnt--;
 	}
-	buffer[index] = 0;
-
-	/* we allow only one expression at a time */
-	ret = ftrace_set_func(array, &ftrace_graph_count, buffer);
-	if (ret)
-		goto out;
-
-	file->f_pos += read;
 
 	ret = read;
  out:
+	trace_parser_put(&parser);
 	mutex_unlock(&graph_lock);
 
 	return ret;
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 454e74e718cf..6eef38923b07 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -701,8 +701,8 @@ static int rb_head_page_set(struct ring_buffer_per_cpu *cpu_buffer,
 
 	val &= ~RB_FLAG_MASK;
 
-	ret = (unsigned long)cmpxchg(&list->next,
-				     val | old_flag, val | new_flag);
+	ret = cmpxchg((unsigned long *)&list->next,
+		      val | old_flag, val | new_flag);
 
 	/* check if the reader took the page */
 	if ((ret & ~RB_FLAG_MASK) != val)
@@ -794,7 +794,7 @@ static int rb_head_page_replace(struct buffer_page *old,
 	val = *ptr & ~RB_FLAG_MASK;
 	val |= RB_PAGE_HEAD;
 
-	ret = cmpxchg(ptr, val, &new->list);
+	ret = cmpxchg(ptr, val, (unsigned long)&new->list);
 
 	return ret == val;
 }
@@ -2997,15 +2997,12 @@ static void rb_advance_iter(struct ring_buffer_iter *iter)
 }
 
 static struct ring_buffer_event *
-rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
+rb_buffer_peek(struct ring_buffer_per_cpu *cpu_buffer, u64 *ts)
 {
-	struct ring_buffer_per_cpu *cpu_buffer;
 	struct ring_buffer_event *event;
 	struct buffer_page *reader;
 	int nr_loops = 0;
 
-	cpu_buffer = buffer->buffers[cpu];
-
  again:
 	/*
 	 * We repeat when a timestamp is encountered. It is possible
@@ -3049,7 +3046,7 @@ rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 	case RINGBUF_TYPE_DATA:
 		if (ts) {
 			*ts = cpu_buffer->read_stamp + event->time_delta;
-			ring_buffer_normalize_time_stamp(buffer,
+			ring_buffer_normalize_time_stamp(cpu_buffer->buffer,
 							 cpu_buffer->cpu, ts);
 		}
 		return event;
@@ -3168,7 +3165,7 @@ ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 	local_irq_save(flags);
 	if (dolock)
 		spin_lock(&cpu_buffer->reader_lock);
-	event = rb_buffer_peek(buffer, cpu, ts);
+	event = rb_buffer_peek(cpu_buffer, ts);
 	if (event && event->type_len == RINGBUF_TYPE_PADDING)
 		rb_advance_reader(cpu_buffer);
 	if (dolock)
@@ -3237,7 +3234,7 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
 	if (dolock)
 		spin_lock(&cpu_buffer->reader_lock);
 
-	event = rb_buffer_peek(buffer, cpu, ts);
+	event = rb_buffer_peek(cpu_buffer, ts);
 	if (event)
 		rb_advance_reader(cpu_buffer);
 
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 5c75deeefe30..fd52a19dd172 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -339,6 +339,112 @@ static struct {
 
 int trace_clock_id;
 
+/*
+ * trace_parser_get_init - gets the buffer for trace parser
+ */
+int trace_parser_get_init(struct trace_parser *parser, int size)
+{
+	memset(parser, 0, sizeof(*parser));
+
+	parser->buffer = kmalloc(size, GFP_KERNEL);
+	if (!parser->buffer)
+		return 1;
+
+	parser->size = size;
+	return 0;
+}
+
+/*
+ * trace_parser_put - frees the buffer for trace parser
+ */
+void trace_parser_put(struct trace_parser *parser)
+{
+	kfree(parser->buffer);
+}
+
+/*
+ * trace_get_user - reads the user input string separated by  space
+ * (matched by isspace(ch))
+ *
+ * For each string found the 'struct trace_parser' is updated,
+ * and the function returns.
+ *
+ * Returns number of bytes read.
+ *
+ * See kernel/trace/trace.h for 'struct trace_parser' details.
+ */
+int trace_get_user(struct trace_parser *parser, const char __user *ubuf,
+	size_t cnt, loff_t *ppos)
+{
+	char ch;
+	size_t read = 0;
+	ssize_t ret;
+
+	if (!*ppos)
+		trace_parser_clear(parser);
+
+	ret = get_user(ch, ubuf++);
+	if (ret)
+		goto out;
+
+	read++;
+	cnt--;
+
+	/*
+	 * The parser is not finished with the last write,
+	 * continue reading the user input without skipping spaces.
+	 */
+	if (!parser->cont) {
+		/* skip white space */
+		while (cnt && isspace(ch)) {
+			ret = get_user(ch, ubuf++);
+			if (ret)
+				goto out;
+			read++;
+			cnt--;
+		}
+
+		/* only spaces were written */
+		if (isspace(ch)) {
+			*ppos += read;
+			ret = read;
+			goto out;
+		}
+
+		parser->idx = 0;
+	}
+
+	/* read the non-space input */
+	while (cnt && !isspace(ch)) {
+		if (parser->idx < parser->size)
+			parser->buffer[parser->idx++] = ch;
+		else {
+			ret = -EINVAL;
+			goto out;
+		}
+		ret = get_user(ch, ubuf++);
+		if (ret)
+			goto out;
+		read++;
+		cnt--;
+	}
+
+	/* We either got finished input or we have to wait for another call. */
+	if (isspace(ch)) {
+		parser->buffer[parser->idx] = 0;
+		parser->cont = false;
+	} else {
+		parser->cont = true;
+		parser->buffer[parser->idx++] = ch;
+	}
+
+	*ppos += read;
+	ret = read;
+
+out:
+	return ret;
+}
+
 ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf, size_t cnt)
 {
 	int len;
@@ -719,6 +825,11 @@ static void trace_init_cmdlines(void)
 	cmdline_idx = 0;
 }
 
+int is_tracing_stopped(void)
+{
+	return trace_stop_count;
+}
+
 /**
  * ftrace_off_permanent - disable all ftrace code permanently
  *
@@ -886,7 +997,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags,
 
 	entry->preempt_count		= pc & 0xff;
 	entry->pid			= (tsk) ? tsk->pid : 0;
-	entry->tgid			= (tsk) ? tsk->tgid : 0;
+	entry->lock_depth		= (tsk) ? tsk->lock_depth : 0;
 	entry->flags =
 #ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
 		(irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) |
@@ -1068,6 +1179,7 @@ ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 		return;
 	entry	= ring_buffer_event_data(event);
 
+	entry->tgid		= current->tgid;
 	memset(&entry->caller, 0, sizeof(entry->caller));
 
 	trace.nr_entries	= 0;
@@ -1094,6 +1206,7 @@ ftrace_trace_special(void *__tr,
 		     unsigned long arg1, unsigned long arg2, unsigned long arg3,
 		     int pc)
 {
+	struct ftrace_event_call *call = &event_special;
 	struct ring_buffer_event *event;
 	struct trace_array *tr = __tr;
 	struct ring_buffer *buffer = tr->buffer;
@@ -1107,7 +1220,9 @@ ftrace_trace_special(void *__tr,
 	entry->arg1			= arg1;
 	entry->arg2			= arg2;
 	entry->arg3			= arg3;
-	trace_buffer_unlock_commit(buffer, event, 0, pc);
+
+	if (!filter_check_discard(call, entry, buffer, event))
+		trace_buffer_unlock_commit(buffer, event, 0, pc);
 }
 
 void
@@ -1530,10 +1645,10 @@ static void print_lat_help_header(struct seq_file *m)
 	seq_puts(m, "#                | / _----=> need-resched    \n");
 	seq_puts(m, "#                || / _---=> hardirq/softirq \n");
 	seq_puts(m, "#                ||| / _--=> preempt-depth   \n");
-	seq_puts(m, "#                |||| /                      \n");
-	seq_puts(m, "#                |||||     delay             \n");
-	seq_puts(m, "#  cmd     pid   ||||| time  |   caller      \n");
-	seq_puts(m, "#     \\   /      |||||   \\   |   /           \n");
+	seq_puts(m, "#                |||| /_--=> lock-depth       \n");
+	seq_puts(m, "#                |||||/     delay             \n");
+	seq_puts(m, "#  cmd     pid   |||||| time  |   caller      \n");
+	seq_puts(m, "#     \\   /      ||||||   \\   |   /           \n");
 }
 
 static void print_func_help_header(struct seq_file *m)
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index fa1dccb579d5..86bcff94791a 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -7,6 +7,7 @@
 #include <linux/clocksource.h>
 #include <linux/ring_buffer.h>
 #include <linux/mmiotrace.h>
+#include <linux/tracepoint.h>
 #include <linux/ftrace.h>
 #include <trace/boot.h>
 #include <linux/kmemtrace.h>
@@ -42,157 +43,54 @@ enum trace_type {
 	__TRACE_LAST_TYPE,
 };
 
-/*
- * Function trace entry - function address and parent function addres:
- */
-struct ftrace_entry {
-	struct trace_entry	ent;
-	unsigned long		ip;
-	unsigned long		parent_ip;
-};
-
-/* Function call entry */
-struct ftrace_graph_ent_entry {
-	struct trace_entry		ent;
-	struct ftrace_graph_ent		graph_ent;
+enum kmemtrace_type_id {
+	KMEMTRACE_TYPE_KMALLOC = 0,	/* kmalloc() or kfree(). */
+	KMEMTRACE_TYPE_CACHE,		/* kmem_cache_*(). */
+	KMEMTRACE_TYPE_PAGES,		/* __get_free_pages() and friends. */
 };
 
-/* Function return entry */
-struct ftrace_graph_ret_entry {
-	struct trace_entry		ent;
-	struct ftrace_graph_ret		ret;
-};
 extern struct tracer boot_tracer;
 
-/*
- * Context switch trace entry - which task (and prio) we switched from/to:
- */
-struct ctx_switch_entry {
-	struct trace_entry	ent;
-	unsigned int		prev_pid;
-	unsigned char		prev_prio;
-	unsigned char		prev_state;
-	unsigned int		next_pid;
-	unsigned char		next_prio;
-	unsigned char		next_state;
-	unsigned int		next_cpu;
-};
-
-/*
- * Special (free-form) trace entry:
- */
-struct special_entry {
-	struct trace_entry	ent;
-	unsigned long		arg1;
-	unsigned long		arg2;
-	unsigned long		arg3;
-};
-
-/*
- * Stack-trace entry:
- */
-
-#define FTRACE_STACK_ENTRIES	8
-
-struct stack_entry {
-	struct trace_entry	ent;
-	unsigned long		caller[FTRACE_STACK_ENTRIES];
-};
-
-struct userstack_entry {
-	struct trace_entry	ent;
-	unsigned long		caller[FTRACE_STACK_ENTRIES];
-};
-
-/*
- * trace_printk entry:
- */
-struct bprint_entry {
-	struct trace_entry	ent;
-	unsigned long		ip;
-	const char		*fmt;
-	u32			buf[];
-};
+#undef __field
+#define __field(type, item)		type	item;
 
-struct print_entry {
-	struct trace_entry	ent;
-	unsigned long		ip;
-	char			buf[];
-};
+#undef __field_struct
+#define __field_struct(type, item)	__field(type, item)
 
-#define TRACE_OLD_SIZE		88
+#undef __field_desc
+#define __field_desc(type, container, item)
 
-struct trace_field_cont {
-	unsigned char		type;
-	/* Temporary till we get rid of this completely */
-	char			buf[TRACE_OLD_SIZE - 1];
-};
+#undef __array
+#define __array(type, item, size)	type	item[size];
 
-struct trace_mmiotrace_rw {
-	struct trace_entry	ent;
-	struct mmiotrace_rw	rw;
-};
+#undef __array_desc
+#define __array_desc(type, container, item, size)
 
-struct trace_mmiotrace_map {
-	struct trace_entry	ent;
-	struct mmiotrace_map	map;
-};
+#undef __dynamic_array
+#define __dynamic_array(type, item)	type	item[];
 
-struct trace_boot_call {
-	struct trace_entry	ent;
-	struct boot_trace_call boot_call;
-};
+#undef F_STRUCT
+#define F_STRUCT(args...)		args
 
-struct trace_boot_ret {
-	struct trace_entry	ent;
-	struct boot_trace_ret boot_ret;
-};
-
-#define TRACE_FUNC_SIZE 30
-#define TRACE_FILE_SIZE 20
-struct trace_branch {
-	struct trace_entry	ent;
-	unsigned	        line;
-	char			func[TRACE_FUNC_SIZE+1];
-	char			file[TRACE_FILE_SIZE+1];
-	char			correct;
-};
-
-struct hw_branch_entry {
-	struct trace_entry	ent;
-	u64			from;
-	u64			to;
-};
-
-struct trace_power {
-	struct trace_entry	ent;
-	struct power_trace	state_data;
-};
+#undef FTRACE_ENTRY
+#define FTRACE_ENTRY(name, struct_name, id, tstruct, print)	\
+	struct struct_name {					\
+		struct trace_entry	ent;			\
+		tstruct						\
+	}
 
-enum kmemtrace_type_id {
-	KMEMTRACE_TYPE_KMALLOC = 0,	/* kmalloc() or kfree(). */
-	KMEMTRACE_TYPE_CACHE,		/* kmem_cache_*(). */
-	KMEMTRACE_TYPE_PAGES,		/* __get_free_pages() and friends. */
-};
+#undef TP_ARGS
+#define TP_ARGS(args...)	args
 
-struct kmemtrace_alloc_entry {
-	struct trace_entry	ent;
-	enum kmemtrace_type_id type_id;
-	unsigned long call_site;
-	const void *ptr;
-	size_t bytes_req;
-	size_t bytes_alloc;
-	gfp_t gfp_flags;
-	int node;
-};
+#undef FTRACE_ENTRY_DUP
+#define FTRACE_ENTRY_DUP(name, name_struct, id, tstruct, printk)
 
-struct kmemtrace_free_entry {
-	struct trace_entry	ent;
-	enum kmemtrace_type_id type_id;
-	unsigned long call_site;
-	const void *ptr;
-};
+#include "trace_entries.h"
 
+/*
+ * syscalls are special, and need special handling, this is why
+ * they are not included in trace_entries.h
+ */
 struct syscall_trace_enter {
 	struct trace_entry	ent;
 	int			nr;
@@ -205,13 +103,12 @@ struct syscall_trace_exit {
 	unsigned long		ret;
 };
 
-
 /*
  * trace_flag_type is an enumeration that holds different
  * states when a trace occurs. These are:
  *  IRQS_OFF		- interrupts were disabled
  *  IRQS_NOSUPPORT	- arch does not support irqs_disabled_flags
- *  NEED_RESCED		- reschedule is requested
+ *  NEED_RESCHED	- reschedule is requested
  *  HARDIRQ		- inside an interrupt handler
  *  SOFTIRQ		- inside a softirq handler
  */
@@ -390,7 +287,6 @@ struct tracer {
 	struct tracer		*next;
 	int			print_max;
 	struct tracer_flags	*flags;
-	struct tracer_stat	*stats;
 };
 
 
@@ -469,6 +365,7 @@ void tracing_stop_sched_switch_record(void);
 void tracing_start_sched_switch_record(void);
 int register_tracer(struct tracer *type);
 void unregister_tracer(struct tracer *type);
+int is_tracing_stopped(void);
 
 extern unsigned long nsecs_to_usecs(unsigned long nsecs);
 
@@ -509,20 +406,6 @@ static inline void __trace_stack(struct trace_array *tr, unsigned long flags,
 
 extern cycle_t ftrace_now(int cpu);
 
-#ifdef CONFIG_CONTEXT_SWITCH_TRACER
-typedef void
-(*tracer_switch_func_t)(void *private,
-			void *__rq,
-			struct task_struct *prev,
-			struct task_struct *next);
-
-struct tracer_switch_ops {
-	tracer_switch_func_t		func;
-	void				*private;
-	struct tracer_switch_ops	*next;
-};
-#endif /* CONFIG_CONTEXT_SWITCH_TRACER */
-
 extern void trace_find_cmdline(int pid, char comm[]);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -638,6 +521,41 @@ static inline int ftrace_trace_task(struct task_struct *task)
 #endif
 
 /*
+ * struct trace_parser - servers for reading the user input separated by spaces
+ * @cont: set if the input is not complete - no final space char was found
+ * @buffer: holds the parsed user input
+ * @idx: user input lenght
+ * @size: buffer size
+ */
+struct trace_parser {
+	bool		cont;
+	char		*buffer;
+	unsigned	idx;
+	unsigned	size;
+};
+
+static inline bool trace_parser_loaded(struct trace_parser *parser)
+{
+	return (parser->idx != 0);
+}
+
+static inline bool trace_parser_cont(struct trace_parser *parser)
+{
+	return parser->cont;
+}
+
+static inline void trace_parser_clear(struct trace_parser *parser)
+{
+	parser->cont = false;
+	parser->idx = 0;
+}
+
+extern int trace_parser_get_init(struct trace_parser *parser, int size);
+extern void trace_parser_put(struct trace_parser *parser);
+extern int trace_get_user(struct trace_parser *parser, const char __user *ubuf,
+	size_t cnt, loff_t *ppos);
+
+/*
  * trace_iterator_flags is an enumeration that defines bit
  * positions into trace_flags that controls the output.
  *
@@ -823,58 +741,18 @@ filter_check_discard(struct ftrace_event_call *call, void *rec,
 	return 0;
 }
 
-#define DEFINE_COMPARISON_PRED(type)					\
-static int filter_pred_##type(struct filter_pred *pred, void *event,	\
-			      int val1, int val2)			\
-{									\
-	type *addr = (type *)(event + pred->offset);			\
-	type val = (type)pred->val;					\
-	int match = 0;							\
-									\
-	switch (pred->op) {						\
-	case OP_LT:							\
-		match = (*addr < val);					\
-		break;							\
-	case OP_LE:							\
-		match = (*addr <= val);					\
-		break;							\
-	case OP_GT:							\
-		match = (*addr > val);					\
-		break;							\
-	case OP_GE:							\
-		match = (*addr >= val);					\
-		break;							\
-	default:							\
-		break;							\
-	}								\
-									\
-	return match;							\
-}
-
-#define DEFINE_EQUALITY_PRED(size)					\
-static int filter_pred_##size(struct filter_pred *pred, void *event,	\
-			      int val1, int val2)			\
-{									\
-	u##size *addr = (u##size *)(event + pred->offset);		\
-	u##size val = (u##size)pred->val;				\
-	int match;							\
-									\
-	match = (val == *addr) ^ pred->not;				\
-									\
-	return match;							\
-}
-
 extern struct mutex event_mutex;
 extern struct list_head ftrace_events;
 
 extern const char *__start___trace_bprintk_fmt[];
 extern const char *__stop___trace_bprintk_fmt[];
 
-#undef TRACE_EVENT_FORMAT
-#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt)	\
+#undef FTRACE_ENTRY
+#define FTRACE_ENTRY(call, struct_name, id, tstruct, print)		\
 	extern struct ftrace_event_call event_##call;
-#undef TRACE_EVENT_FORMAT_NOFILTER
-#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct, tpfmt)
-#include "trace_event_types.h"
+#undef FTRACE_ENTRY_DUP
+#define FTRACE_ENTRY_DUP(call, struct_name, id, tstruct, print)		\
+	FTRACE_ENTRY(call, struct_name, id, PARAMS(tstruct), PARAMS(print))
+#include "trace_entries.h"
 
 #endif /* _LINUX_KERNEL_TRACE_H */
diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c
index 19bfc75d467e..c21d5f3956ad 100644
--- a/kernel/trace/trace_boot.c
+++ b/kernel/trace/trace_boot.c
@@ -129,6 +129,7 @@ struct tracer boot_tracer __read_mostly =
 
 void trace_boot_call(struct boot_trace_call *bt, initcall_t fn)
 {
+	struct ftrace_event_call *call = &event_boot_call;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
 	struct trace_boot_call *entry;
@@ -150,13 +151,15 @@ void trace_boot_call(struct boot_trace_call *bt, initcall_t fn)
 		goto out;
 	entry	= ring_buffer_event_data(event);
 	entry->boot_call = *bt;
-	trace_buffer_unlock_commit(buffer, event, 0, 0);
+	if (!filter_check_discard(call, entry, buffer, event))
+		trace_buffer_unlock_commit(buffer, event, 0, 0);
  out:
 	preempt_enable();
 }
 
 void trace_boot_ret(struct boot_trace_ret *bt, initcall_t fn)
 {
+	struct ftrace_event_call *call = &event_boot_ret;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
 	struct trace_boot_ret *entry;
@@ -175,7 +178,8 @@ void trace_boot_ret(struct boot_trace_ret *bt, initcall_t fn)
 		goto out;
 	entry	= ring_buffer_event_data(event);
 	entry->boot_ret = *bt;
-	trace_buffer_unlock_commit(buffer, event, 0, 0);
+	if (!filter_check_discard(call, entry, buffer, event))
+		trace_buffer_unlock_commit(buffer, event, 0, 0);
  out:
 	preempt_enable();
 }
diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index b588fd81f7f9..20c5f92e28a8 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -66,10 +66,14 @@ u64 notrace trace_clock(void)
  * Used by plugins that need globally coherent timestamps.
  */
 
-static u64 prev_trace_clock_time;
-
-static raw_spinlock_t trace_clock_lock ____cacheline_aligned_in_smp =
-	(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
+/* keep prev_time and lock in the same cacheline. */
+static struct {
+	u64 prev_time;
+	raw_spinlock_t lock;
+} trace_clock_struct ____cacheline_aligned_in_smp =
+	{
+		.lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED,
+	};
 
 u64 notrace trace_clock_global(void)
 {
@@ -88,19 +92,19 @@ u64 notrace trace_clock_global(void)
 	if (unlikely(in_nmi()))
 		goto out;
 
-	__raw_spin_lock(&trace_clock_lock);
+	__raw_spin_lock(&trace_clock_struct.lock);
 
 	/*
 	 * TODO: if this happens often then maybe we should reset
-	 * my_scd->clock to prev_trace_clock_time+1, to make sure
+	 * my_scd->clock to prev_time+1, to make sure
 	 * we start ticking with the local clock from now on?
 	 */
-	if ((s64)(now - prev_trace_clock_time) < 0)
-		now = prev_trace_clock_time + 1;
+	if ((s64)(now - trace_clock_struct.prev_time) < 0)
+		now = trace_clock_struct.prev_time + 1;
 
-	prev_trace_clock_time = now;
+	trace_clock_struct.prev_time = now;
 
-	__raw_spin_unlock(&trace_clock_lock);
+	__raw_spin_unlock(&trace_clock_struct.lock);
 
  out:
 	raw_local_irq_restore(flags);
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
new file mode 100644
index 000000000000..a431748ddd6e
--- /dev/null
+++ b/kernel/trace/trace_entries.h
@@ -0,0 +1,383 @@
+/*
+ * This file defines the trace event structures that go into the ring
+ * buffer directly. They are created via macros so that changes for them
+ * appear in the format file. Using macros will automate this process.
+ *
+ * The macro used to create a ftrace data structure is:
+ *
+ * FTRACE_ENTRY( name, struct_name, id, structure, print )
+ *
+ * @name: the name used the event name, as well as the name of
+ *   the directory that holds the format file.
+ *
+ * @struct_name: the name of the structure that is created.
+ *
+ * @id: The event identifier that is used to detect what event
+ *    this is from the ring buffer.
+ *
+ * @structure: the structure layout
+ *
+ *  - __field(	type,	item	)
+ *	  This is equivalent to declaring
+ *		type	item;
+ *	  in the structure.
+ *  - __array(	type,	item,	size	)
+ *	  This is equivalent to declaring
+ *		type	item[size];
+ *	  in the structure.
+ *
+ *   * for structures within structures, the format of the internal
+ *	structure is layed out. This allows the internal structure
+ *	to be deciphered for the format file. Although these macros
+ *	may become out of sync with the internal structure, they
+ *	will create a compile error if it happens. Since the
+ *	internel structures are just tracing helpers, this is not
+ *	an issue.
+ *
+ *	When an internal structure is used, it should use:
+ *
+ *	__field_struct(	type,	item	)
+ *
+ *	instead of __field. This will prevent it from being shown in
+ *	the output file. The fields in the structure should use.
+ *
+ *	__field_desc(	type,	container,	item		)
+ *	__array_desc(	type,	container,	item,	len	)
+ *
+ *	type, item and len are the same as __field and __array, but
+ *	container is added. This is the name of the item in
+ *	__field_struct that this is describing.
+ *
+ *
+ * @print: the print format shown to users in the format file.
+ */
+
+/*
+ * Function trace entry - function address and parent function addres:
+ */
+FTRACE_ENTRY(function, ftrace_entry,
+
+	TRACE_FN,
+
+	F_STRUCT(
+		__field(	unsigned long,	ip		)
+		__field(	unsigned long,	parent_ip	)
+	),
+
+	F_printk(" %lx <-- %lx", __entry->ip, __entry->parent_ip)
+);
+
+/* Function call entry */
+FTRACE_ENTRY(funcgraph_entry, ftrace_graph_ent_entry,
+
+	TRACE_GRAPH_ENT,
+
+	F_STRUCT(
+		__field_struct(	struct ftrace_graph_ent,	graph_ent	)
+		__field_desc(	unsigned long,	graph_ent,	func		)
+		__field_desc(	int,		graph_ent,	depth		)
+	),
+
+	F_printk("--> %lx (%d)", __entry->func, __entry->depth)
+);
+
+/* Function return entry */
+FTRACE_ENTRY(funcgraph_exit, ftrace_graph_ret_entry,
+
+	TRACE_GRAPH_RET,
+
+	F_STRUCT(
+		__field_struct(	struct ftrace_graph_ret,	ret	)
+		__field_desc(	unsigned long,	ret,		func	)
+		__field_desc(	unsigned long long, ret,	calltime)
+		__field_desc(	unsigned long long, ret,	rettime	)
+		__field_desc(	unsigned long,	ret,		overrun	)
+		__field_desc(	int,		ret,		depth	)
+	),
+
+	F_printk("<-- %lx (%d) (start: %llx  end: %llx) over: %d",
+		 __entry->func, __entry->depth,
+		 __entry->calltime, __entry->rettime,
+		 __entry->depth)
+);
+
+/*
+ * Context switch trace entry - which task (and prio) we switched from/to:
+ *
+ * This is used for both wakeup and context switches. We only want
+ * to create one structure, but we need two outputs for it.
+ */
+#define FTRACE_CTX_FIELDS					\
+	__field(	unsigned int,	prev_pid	)	\
+	__field(	unsigned char,	prev_prio	)	\
+	__field(	unsigned char,	prev_state	)	\
+	__field(	unsigned int,	next_pid	)	\
+	__field(	unsigned char,	next_prio	)	\
+	__field(	unsigned char,	next_state	)	\
+	__field(	unsigned int,	next_cpu	)
+
+FTRACE_ENTRY(context_switch, ctx_switch_entry,
+
+	TRACE_CTX,
+
+	F_STRUCT(
+		FTRACE_CTX_FIELDS
+	),
+
+	F_printk("%u:%u:%u  ==> %u:%u:%u [%03u]",
+		 __entry->prev_pid, __entry->prev_prio, __entry->prev_state,
+		 __entry->next_pid, __entry->next_prio, __entry->next_state,
+		 __entry->next_cpu
+		)
+);
+
+/*
+ * FTRACE_ENTRY_DUP only creates the format file, it will not
+ *  create another structure.
+ */
+FTRACE_ENTRY_DUP(wakeup, ctx_switch_entry,
+
+	TRACE_WAKE,
+
+	F_STRUCT(
+		FTRACE_CTX_FIELDS
+	),
+
+	F_printk("%u:%u:%u  ==+ %u:%u:%u [%03u]",
+		 __entry->prev_pid, __entry->prev_prio, __entry->prev_state,
+		 __entry->next_pid, __entry->next_prio, __entry->next_state,
+		 __entry->next_cpu
+		)
+);
+
+/*
+ * Special (free-form) trace entry:
+ */
+FTRACE_ENTRY(special, special_entry,
+
+	TRACE_SPECIAL,
+
+	F_STRUCT(
+		__field(	unsigned long,	arg1	)
+		__field(	unsigned long,	arg2	)
+		__field(	unsigned long,	arg3	)
+	),
+
+	F_printk("(%08lx) (%08lx) (%08lx)",
+		 __entry->arg1, __entry->arg2, __entry->arg3)
+);
+
+/*
+ * Stack-trace entry:
+ */
+
+#define FTRACE_STACK_ENTRIES	8
+
+FTRACE_ENTRY(kernel_stack, stack_entry,
+
+	TRACE_STACK,
+
+	F_STRUCT(
+		__array(	unsigned long,	caller, FTRACE_STACK_ENTRIES	)
+	),
+
+	F_printk("\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n"
+		 "\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n",
+		 __entry->caller[0], __entry->caller[1], __entry->caller[2],
+		 __entry->caller[3], __entry->caller[4], __entry->caller[5],
+		 __entry->caller[6], __entry->caller[7])
+);
+
+FTRACE_ENTRY(user_stack, userstack_entry,
+
+	TRACE_USER_STACK,
+
+	F_STRUCT(
+		__field(	unsigned int,	tgid	)
+		__array(	unsigned long,	caller, FTRACE_STACK_ENTRIES	)
+	),
+
+	F_printk("\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n"
+		 "\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n",
+		 __entry->caller[0], __entry->caller[1], __entry->caller[2],
+		 __entry->caller[3], __entry->caller[4], __entry->caller[5],
+		 __entry->caller[6], __entry->caller[7])
+);
+
+/*
+ * trace_printk entry:
+ */
+FTRACE_ENTRY(bprint, bprint_entry,
+
+	TRACE_BPRINT,
+
+	F_STRUCT(
+		__field(	unsigned long,	ip	)
+		__field(	const char *,	fmt	)
+		__dynamic_array(	u32,	buf	)
+	),
+
+	F_printk("%08lx fmt:%p",
+		 __entry->ip, __entry->fmt)
+);
+
+FTRACE_ENTRY(print, print_entry,
+
+	TRACE_PRINT,
+
+	F_STRUCT(
+		__field(	unsigned long,	ip	)
+		__dynamic_array(	char,	buf	)
+	),
+
+	F_printk("%08lx %s",
+		 __entry->ip, __entry->buf)
+);
+
+FTRACE_ENTRY(mmiotrace_rw, trace_mmiotrace_rw,
+
+	TRACE_MMIO_RW,
+
+	F_STRUCT(
+		__field_struct(	struct mmiotrace_rw,	rw	)
+		__field_desc(	resource_size_t, rw,	phys	)
+		__field_desc(	unsigned long,	rw,	value	)
+		__field_desc(	unsigned long,	rw,	pc	)
+		__field_desc(	int, 		rw,	map_id	)
+		__field_desc(	unsigned char,	rw,	opcode	)
+		__field_desc(	unsigned char,	rw,	width	)
+	),
+
+	F_printk("%lx %lx %lx %d %x %x",
+		 (unsigned long)__entry->phys, __entry->value, __entry->pc,
+		 __entry->map_id, __entry->opcode, __entry->width)
+);
+
+FTRACE_ENTRY(mmiotrace_map, trace_mmiotrace_map,
+
+	TRACE_MMIO_MAP,
+
+	F_STRUCT(
+		__field_struct(	struct mmiotrace_map,	map	)
+		__field_desc(	resource_size_t, map,	phys	)
+		__field_desc(	unsigned long,	map,	virt	)
+		__field_desc(	unsigned long,	map,	len	)
+		__field_desc(	int, 		map,	map_id	)
+		__field_desc(	unsigned char,	map,	opcode	)
+	),
+
+	F_printk("%lx %lx %lx %d %x",
+		 (unsigned long)__entry->phys, __entry->virt, __entry->len,
+		 __entry->map_id, __entry->opcode)
+);
+
+FTRACE_ENTRY(boot_call, trace_boot_call,
+
+	TRACE_BOOT_CALL,
+
+	F_STRUCT(
+		__field_struct(	struct boot_trace_call,	boot_call	)
+		__field_desc(	pid_t,	boot_call,	caller		)
+		__array_desc(	char,	boot_call,	func,	KSYM_SYMBOL_LEN)
+	),
+
+	F_printk("%d  %s", __entry->caller, __entry->func)
+);
+
+FTRACE_ENTRY(boot_ret, trace_boot_ret,
+
+	TRACE_BOOT_RET,
+
+	F_STRUCT(
+		__field_struct(	struct boot_trace_ret,	boot_ret	)
+		__array_desc(	char,	boot_ret,	func,	KSYM_SYMBOL_LEN)
+		__field_desc(	int,	boot_ret,	result		)
+		__field_desc(	unsigned long, boot_ret, duration	)
+	),
+
+	F_printk("%s %d %lx",
+		 __entry->func, __entry->result, __entry->duration)
+);
+
+#define TRACE_FUNC_SIZE 30
+#define TRACE_FILE_SIZE 20
+
+FTRACE_ENTRY(branch, trace_branch,
+
+	TRACE_BRANCH,
+
+	F_STRUCT(
+		__field(	unsigned int,	line				)
+		__array(	char,		func,	TRACE_FUNC_SIZE+1	)
+		__array(	char,		file,	TRACE_FILE_SIZE+1	)
+		__field(	char,		correct				)
+	),
+
+	F_printk("%u:%s:%s (%u)",
+		 __entry->line,
+		 __entry->func, __entry->file, __entry->correct)
+);
+
+FTRACE_ENTRY(hw_branch, hw_branch_entry,
+
+	TRACE_HW_BRANCHES,
+
+	F_STRUCT(
+		__field(	u64,	from	)
+		__field(	u64,	to	)
+	),
+
+	F_printk("from: %llx to: %llx", __entry->from, __entry->to)
+);
+
+FTRACE_ENTRY(power, trace_power,
+
+	TRACE_POWER,
+
+	F_STRUCT(
+		__field_struct(	struct power_trace,	state_data	)
+		__field_desc(	s64,	state_data,	stamp		)
+		__field_desc(	s64,	state_data,	end		)
+		__field_desc(	int,	state_data,	type		)
+		__field_desc(	int,	state_data,	state		)
+	),
+
+	F_printk("%llx->%llx type:%u state:%u",
+		 __entry->stamp, __entry->end,
+		 __entry->type, __entry->state)
+);
+
+FTRACE_ENTRY(kmem_alloc, kmemtrace_alloc_entry,
+
+	TRACE_KMEM_ALLOC,
+
+	F_STRUCT(
+		__field(	enum kmemtrace_type_id,	type_id		)
+		__field(	unsigned long,		call_site	)
+		__field(	const void *,		ptr		)
+		__field(	size_t,			bytes_req	)
+		__field(	size_t,			bytes_alloc	)
+		__field(	gfp_t,			gfp_flags	)
+		__field(	int,			node		)
+	),
+
+	F_printk("type:%u call_site:%lx ptr:%p req:%zi alloc:%zi"
+		 " flags:%x node:%d",
+		 __entry->type_id, __entry->call_site, __entry->ptr,
+		 __entry->bytes_req, __entry->bytes_alloc,
+		 __entry->gfp_flags, __entry->node)
+);
+
+FTRACE_ENTRY(kmem_free, kmemtrace_free_entry,
+
+	TRACE_KMEM_FREE,
+
+	F_STRUCT(
+		__field(	enum kmemtrace_type_id,	type_id		)
+		__field(	unsigned long,		call_site	)
+		__field(	const void *,		ptr		)
+	),
+
+	F_printk("type:%u call_site:%lx ptr:%p",
+		 __entry->type_id, __entry->call_site, __entry->ptr)
+);
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_profile.c
index 11ba5bb4ed0a..55a25c933d15 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_profile.c
@@ -5,6 +5,7 @@
  *
  */
 
+#include <linux/module.h>
 #include "trace.h"
 
 int ftrace_profile_enable(int event_id)
@@ -14,7 +15,8 @@ int ftrace_profile_enable(int event_id)
 
 	mutex_lock(&event_mutex);
 	list_for_each_entry(event, &ftrace_events, list) {
-		if (event->id == event_id && event->profile_enable) {
+		if (event->id == event_id && event->profile_enable &&
+		    try_module_get(event->mod)) {
 			ret = event->profile_enable(event);
 			break;
 		}
@@ -32,6 +34,7 @@ void ftrace_profile_disable(int event_id)
 	list_for_each_entry(event, &ftrace_events, list) {
 		if (event->id == event_id) {
 			event->profile_disable(event);
+			module_put(event->mod);
 			break;
 		}
 	}
diff --git a/kernel/trace/trace_event_types.h b/kernel/trace/trace_event_types.h
deleted file mode 100644
index 6db005e12487..000000000000
--- a/kernel/trace/trace_event_types.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM	ftrace
-
-/*
- * We cheat and use the proto type field as the ID
- * and args as the entry type (minus 'struct')
- */
-TRACE_EVENT_FORMAT(function, TRACE_FN, ftrace_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, ip, ip)
-		TRACE_FIELD(unsigned long, parent_ip, parent_ip)
-	),
-	TP_RAW_FMT(" %lx <-- %lx")
-);
-
-TRACE_EVENT_FORMAT(funcgraph_entry, TRACE_GRAPH_ENT,
-		   ftrace_graph_ent_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, graph_ent.func, func)
-		TRACE_FIELD(int, graph_ent.depth, depth)
-	),
-	TP_RAW_FMT("--> %lx (%d)")
-);
-
-TRACE_EVENT_FORMAT(funcgraph_exit, TRACE_GRAPH_RET,
-		   ftrace_graph_ret_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, ret.func, func)
-		TRACE_FIELD(unsigned long long, ret.calltime, calltime)
-		TRACE_FIELD(unsigned long long, ret.rettime, rettime)
-		TRACE_FIELD(unsigned long, ret.overrun, overrun)
-		TRACE_FIELD(int, ret.depth, depth)
-	),
-	TP_RAW_FMT("<-- %lx (%d)")
-);
-
-TRACE_EVENT_FORMAT(wakeup, TRACE_WAKE, ctx_switch_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned int, prev_pid, prev_pid)
-		TRACE_FIELD(unsigned char, prev_prio, prev_prio)
-		TRACE_FIELD(unsigned char, prev_state, prev_state)
-		TRACE_FIELD(unsigned int, next_pid, next_pid)
-		TRACE_FIELD(unsigned char, next_prio, next_prio)
-		TRACE_FIELD(unsigned char, next_state, next_state)
-		TRACE_FIELD(unsigned int, next_cpu, next_cpu)
-	),
-	TP_RAW_FMT("%u:%u:%u  ==+ %u:%u:%u [%03u]")
-);
-
-TRACE_EVENT_FORMAT(context_switch, TRACE_CTX, ctx_switch_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned int, prev_pid, prev_pid)
-		TRACE_FIELD(unsigned char, prev_prio, prev_prio)
-		TRACE_FIELD(unsigned char, prev_state, prev_state)
-		TRACE_FIELD(unsigned int, next_pid, next_pid)
-		TRACE_FIELD(unsigned char, next_prio, next_prio)
-		TRACE_FIELD(unsigned char, next_state, next_state)
-		TRACE_FIELD(unsigned int, next_cpu, next_cpu)
-	),
-	TP_RAW_FMT("%u:%u:%u  ==+ %u:%u:%u [%03u]")
-);
-
-TRACE_EVENT_FORMAT_NOFILTER(special, TRACE_SPECIAL, special_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, arg1, arg1)
-		TRACE_FIELD(unsigned long, arg2, arg2)
-		TRACE_FIELD(unsigned long, arg3, arg3)
-	),
-	TP_RAW_FMT("(%08lx) (%08lx) (%08lx)")
-);
-
-/*
- * Stack-trace entry:
- */
-
-/* #define FTRACE_STACK_ENTRIES   8 */
-
-TRACE_EVENT_FORMAT(kernel_stack, TRACE_STACK, stack_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, caller[0], stack0)
-		TRACE_FIELD(unsigned long, caller[1], stack1)
-		TRACE_FIELD(unsigned long, caller[2], stack2)
-		TRACE_FIELD(unsigned long, caller[3], stack3)
-		TRACE_FIELD(unsigned long, caller[4], stack4)
-		TRACE_FIELD(unsigned long, caller[5], stack5)
-		TRACE_FIELD(unsigned long, caller[6], stack6)
-		TRACE_FIELD(unsigned long, caller[7], stack7)
-	),
-	TP_RAW_FMT("\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n"
-		 "\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n")
-);
-
-TRACE_EVENT_FORMAT(user_stack, TRACE_USER_STACK, userstack_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, caller[0], stack0)
-		TRACE_FIELD(unsigned long, caller[1], stack1)
-		TRACE_FIELD(unsigned long, caller[2], stack2)
-		TRACE_FIELD(unsigned long, caller[3], stack3)
-		TRACE_FIELD(unsigned long, caller[4], stack4)
-		TRACE_FIELD(unsigned long, caller[5], stack5)
-		TRACE_FIELD(unsigned long, caller[6], stack6)
-		TRACE_FIELD(unsigned long, caller[7], stack7)
-	),
-	TP_RAW_FMT("\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n"
-		 "\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n")
-);
-
-TRACE_EVENT_FORMAT(bprint, TRACE_BPRINT, bprint_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, ip, ip)
-		TRACE_FIELD(char *, fmt, fmt)
-		TRACE_FIELD_ZERO_CHAR(buf)
-	),
-	TP_RAW_FMT("%08lx (%d) fmt:%p %s")
-);
-
-TRACE_EVENT_FORMAT(print, TRACE_PRINT, print_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned long, ip, ip)
-		TRACE_FIELD_ZERO_CHAR(buf)
-	),
-	TP_RAW_FMT("%08lx (%d) fmt:%p %s")
-);
-
-TRACE_EVENT_FORMAT(branch, TRACE_BRANCH, trace_branch, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(unsigned int, line, line)
-		TRACE_FIELD_SPECIAL(char func[TRACE_FUNC_SIZE+1], func,
-				    TRACE_FUNC_SIZE+1, func)
-		TRACE_FIELD_SPECIAL(char file[TRACE_FUNC_SIZE+1], file,
-				    TRACE_FUNC_SIZE+1, file)
-		TRACE_FIELD(char, correct, correct)
-	),
-	TP_RAW_FMT("%u:%s:%s (%u)")
-);
-
-TRACE_EVENT_FORMAT(hw_branch, TRACE_HW_BRANCHES, hw_branch_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(u64, from, from)
-		TRACE_FIELD(u64, to, to)
-	),
-	TP_RAW_FMT("from: %llx to: %llx")
-);
-
-TRACE_EVENT_FORMAT(power, TRACE_POWER, trace_power, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD_SIGN(ktime_t, state_data.stamp, stamp, 1)
-		TRACE_FIELD_SIGN(ktime_t, state_data.end, end, 1)
-		TRACE_FIELD(int, state_data.type, type)
-		TRACE_FIELD(int, state_data.state, state)
-	),
-	TP_RAW_FMT("%llx->%llx type:%u state:%u")
-);
-
-TRACE_EVENT_FORMAT(kmem_alloc, TRACE_KMEM_ALLOC, kmemtrace_alloc_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(enum kmemtrace_type_id, type_id, type_id)
-		TRACE_FIELD(unsigned long, call_site, call_site)
-		TRACE_FIELD(const void *, ptr, ptr)
-		TRACE_FIELD(size_t, bytes_req, bytes_req)
-		TRACE_FIELD(size_t, bytes_alloc, bytes_alloc)
-		TRACE_FIELD(gfp_t, gfp_flags, gfp_flags)
-		TRACE_FIELD(int, node, node)
-	),
-	TP_RAW_FMT("type:%u call_site:%lx ptr:%p req:%lu alloc:%lu"
-		 " flags:%x node:%d")
-);
-
-TRACE_EVENT_FORMAT(kmem_free, TRACE_KMEM_FREE, kmemtrace_free_entry, ignore,
-	TRACE_STRUCT(
-		TRACE_FIELD(enum kmemtrace_type_id, type_id, type_id)
-		TRACE_FIELD(unsigned long, call_site, call_site)
-		TRACE_FIELD(const void *, ptr, ptr)
-	),
-	TP_RAW_FMT("type:%u call_site:%lx ptr:%p")
-);
-
-#undef TRACE_SYSTEM
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 97e2c4d2e9eb..56c260b83a9c 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -21,6 +21,7 @@
 
 #include "trace_output.h"
 
+#undef TRACE_SYSTEM
 #define TRACE_SYSTEM "TRACE_SYSTEM"
 
 DEFINE_MUTEX(event_mutex);
@@ -86,7 +87,7 @@ int trace_define_common_fields(struct ftrace_event_call *call)
 	__common_field(unsigned char, flags);
 	__common_field(unsigned char, preempt_count);
 	__common_field(int, pid);
-	__common_field(int, tgid);
+	__common_field(int, lock_depth);
 
 	return ret;
 }
@@ -230,11 +231,9 @@ static ssize_t
 ftrace_event_write(struct file *file, const char __user *ubuf,
 		   size_t cnt, loff_t *ppos)
 {
+	struct trace_parser parser;
 	size_t read = 0;
-	int i, set = 1;
 	ssize_t ret;
-	char *buf;
-	char ch;
 
 	if (!cnt || cnt < 0)
 		return 0;
@@ -243,60 +242,28 @@ ftrace_event_write(struct file *file, const char __user *ubuf,
 	if (ret < 0)
 		return ret;
 
-	ret = get_user(ch, ubuf++);
-	if (ret)
-		return ret;
-	read++;
-	cnt--;
-
-	/* skip white space */
-	while (cnt && isspace(ch)) {
-		ret = get_user(ch, ubuf++);
-		if (ret)
-			return ret;
-		read++;
-		cnt--;
-	}
-
-	/* Only white space found? */
-	if (isspace(ch)) {
-		file->f_pos += read;
-		ret = read;
-		return ret;
-	}
-
-	buf = kmalloc(EVENT_BUF_SIZE+1, GFP_KERNEL);
-	if (!buf)
+	if (trace_parser_get_init(&parser, EVENT_BUF_SIZE + 1))
 		return -ENOMEM;
 
-	if (cnt > EVENT_BUF_SIZE)
-		cnt = EVENT_BUF_SIZE;
+	read = trace_get_user(&parser, ubuf, cnt, ppos);
+
+	if (trace_parser_loaded((&parser))) {
+		int set = 1;
 
-	i = 0;
-	while (cnt && !isspace(ch)) {
-		if (!i && ch == '!')
+		if (*parser.buffer == '!')
 			set = 0;
-		else
-			buf[i++] = ch;
 
-		ret = get_user(ch, ubuf++);
+		parser.buffer[parser.idx] = 0;
+
+		ret = ftrace_set_clr_event(parser.buffer + !set, set);
 		if (ret)
-			goto out_free;
-		read++;
-		cnt--;
+			goto out_put;
 	}
-	buf[i] = 0;
-
-	file->f_pos += read;
-
-	ret = ftrace_set_clr_event(buf, set);
-	if (ret)
-		goto out_free;
 
 	ret = read;
 
- out_free:
-	kfree(buf);
+ out_put:
+	trace_parser_put(&parser);
 
 	return ret;
 }
@@ -578,7 +545,7 @@ static int trace_write_header(struct trace_seq *s)
 				FIELD(unsigned char, flags),
 				FIELD(unsigned char, preempt_count),
 				FIELD(int, pid),
-				FIELD(int, tgid));
+				FIELD(int, lock_depth));
 }
 
 static ssize_t
@@ -1187,7 +1154,7 @@ static int trace_module_notify(struct notifier_block *self,
 }
 #endif /* CONFIG_MODULES */
 
-struct notifier_block trace_module_nb = {
+static struct notifier_block trace_module_nb = {
 	.notifier_call = trace_module_notify,
 	.priority = 0,
 };
@@ -1359,6 +1326,18 @@ static __init void event_trace_self_tests(void)
 		if (!call->regfunc)
 			continue;
 
+/*
+ * Testing syscall events here is pretty useless, but
+ * we still do it if configured. But this is time consuming.
+ * What we really need is a user thread to perform the
+ * syscalls as we test.
+ */
+#ifndef CONFIG_EVENT_TRACE_TEST_SYSCALLS
+		if (call->system &&
+		    strcmp(call->system, "syscalls") == 0)
+			continue;
+#endif
+
 		pr_info("Testing event %s: ", call->name);
 
 		/*
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 93660fbbf629..23245785927f 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -121,6 +121,47 @@ struct filter_parse_state {
 	} operand;
 };
 
+#define DEFINE_COMPARISON_PRED(type)					\
+static int filter_pred_##type(struct filter_pred *pred, void *event,	\
+			      int val1, int val2)			\
+{									\
+	type *addr = (type *)(event + pred->offset);			\
+	type val = (type)pred->val;					\
+	int match = 0;							\
+									\
+	switch (pred->op) {						\
+	case OP_LT:							\
+		match = (*addr < val);					\
+		break;							\
+	case OP_LE:							\
+		match = (*addr <= val);					\
+		break;							\
+	case OP_GT:							\
+		match = (*addr > val);					\
+		break;							\
+	case OP_GE:							\
+		match = (*addr >= val);					\
+		break;							\
+	default:							\
+		break;							\
+	}								\
+									\
+	return match;							\
+}
+
+#define DEFINE_EQUALITY_PRED(size)					\
+static int filter_pred_##size(struct filter_pred *pred, void *event,	\
+			      int val1, int val2)			\
+{									\
+	u##size *addr = (u##size *)(event + pred->offset);		\
+	u##size val = (u##size)pred->val;				\
+	int match;							\
+									\
+	match = (val == *addr) ^ pred->not;				\
+									\
+	return match;							\
+}
+
 DEFINE_COMPARISON_PRED(s64);
 DEFINE_COMPARISON_PRED(u64);
 DEFINE_COMPARISON_PRED(s32);
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index df1bf6e48bb9..9753fcc61bc5 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -15,146 +15,125 @@
 
 #include "trace_output.h"
 
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM	ftrace
 
-#undef TRACE_STRUCT
-#define TRACE_STRUCT(args...) args
+/* not needed for this file */
+#undef __field_struct
+#define __field_struct(type, item)
 
-extern void __bad_type_size(void);
+#undef __field
+#define __field(type, item)				type item;
 
-#undef TRACE_FIELD
-#define TRACE_FIELD(type, item, assign)					\
-	if (sizeof(type) != sizeof(field.item))				\
-		__bad_type_size();					\
+#undef __field_desc
+#define __field_desc(type, container, item)		type item;
+
+#undef __array
+#define __array(type, item, size)			type item[size];
+
+#undef __array_desc
+#define __array_desc(type, container, item, size)	type item[size];
+
+#undef __dynamic_array
+#define __dynamic_array(type, item)			type item[];
+
+#undef F_STRUCT
+#define F_STRUCT(args...)				args
+
+#undef F_printk
+#define F_printk(fmt, args...) fmt, args
+
+#undef FTRACE_ENTRY
+#define FTRACE_ENTRY(name, struct_name, id, tstruct, print)	\
+struct ____ftrace_##name {					\
+	tstruct							\
+};								\
+static void __used ____ftrace_check_##name(void)		\
+{								\
+	struct ____ftrace_##name *__entry = NULL;		\
+								\
+	/* force cmpile-time check on F_printk() */		\
+	printk(print);						\
+}
+
+#undef FTRACE_ENTRY_DUP
+#define FTRACE_ENTRY_DUP(name, struct_name, id, tstruct, print)	\
+	FTRACE_ENTRY(name, struct_name, id, PARAMS(tstruct), PARAMS(print))
+
+#include "trace_entries.h"
+
+
+#undef __field
+#define __field(type, item)						\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
-			       "offset:%u;\tsize:%u;\n",		\
-			       (unsigned int)offsetof(typeof(field), item), \
-			       (unsigned int)sizeof(field.item));	\
+			       "offset:%zu;\tsize:%zu;\n",		\
+			       offsetof(typeof(field), item),		\
+			       sizeof(field.item));			\
 	if (!ret)							\
 		return 0;
 
+#undef __field_desc
+#define __field_desc(type, container, item)				\
+	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
+			       "offset:%zu;\tsize:%zu;\n",		\
+			       offsetof(typeof(field), container.item),	\
+			       sizeof(field.container.item));		\
+	if (!ret)							\
+		return 0;
 
-#undef TRACE_FIELD_SPECIAL
-#define TRACE_FIELD_SPECIAL(type_item, item, len, cmd)			\
-	ret = trace_seq_printf(s, "\tfield special:" #type_item ";\t"	\
-			       "offset:%u;\tsize:%u;\n",		\
-			       (unsigned int)offsetof(typeof(field), item), \
-			       (unsigned int)sizeof(field.item));	\
+#undef __array
+#define __array(type, item, len)					\
+	ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t" \
+			       "offset:%zu;\tsize:%zu;\n",		\
+			       offsetof(typeof(field), item),	\
+			       sizeof(field.item));		\
 	if (!ret)							\
 		return 0;
 
-#undef TRACE_FIELD_ZERO_CHAR
-#define TRACE_FIELD_ZERO_CHAR(item)					\
-	ret = trace_seq_printf(s, "\tfield:char " #item ";\t"		\
-			       "offset:%u;\tsize:0;\n",			\
-			       (unsigned int)offsetof(typeof(field), item)); \
+#undef __array_desc
+#define __array_desc(type, container, item, len)			\
+	ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t" \
+			       "offset:%zu;\tsize:%zu;\n",		\
+			       offsetof(typeof(field), container.item),	\
+			       sizeof(field.container.item));		\
 	if (!ret)							\
 		return 0;
 
-#undef TRACE_FIELD_SIGN
-#define TRACE_FIELD_SIGN(type, item, assign, is_signed)	\
-	TRACE_FIELD(type, item, assign)
+#undef __dynamic_array
+#define __dynamic_array(type, item)					\
+	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
+			       "offset:%zu;\tsize:0;\n",		\
+			       offsetof(typeof(field), item));		\
+	if (!ret)							\
+		return 0;
 
-#undef TP_RAW_FMT
-#define TP_RAW_FMT(args...) args
+#undef F_printk
+#define F_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args)
 
-#undef TRACE_EVENT_FORMAT
-#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt)	\
-static int								\
-ftrace_format_##call(struct ftrace_event_call *unused,			\
-		      struct trace_seq *s)				\
-{									\
-	struct args field;						\
-	int ret;							\
-									\
-	tstruct;							\
-									\
-	trace_seq_printf(s, "\nprint fmt: \"%s\"\n", tpfmt);		\
-									\
-	return ret;							\
-}
+#undef __entry
+#define __entry REC
 
-#undef TRACE_EVENT_FORMAT_NOFILTER
-#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct,	\
-				    tpfmt)				\
+#undef FTRACE_ENTRY
+#define FTRACE_ENTRY(name, struct_name, id, tstruct, print)		\
 static int								\
-ftrace_format_##call(struct ftrace_event_call *unused,			\
-		      struct trace_seq *s)				\
+ftrace_format_##name(struct ftrace_event_call *unused,			\
+		     struct trace_seq *s)				\
 {									\
-	struct args field;						\
-	int ret;							\
+	struct struct_name field __attribute__((unused));		\
+	int ret = 0;							\
 									\
 	tstruct;							\
 									\
-	trace_seq_printf(s, "\nprint fmt: \"%s\"\n", tpfmt);		\
+	trace_seq_printf(s, "\nprint fmt: " print);			\
 									\
 	return ret;							\
 }
 
-#include "trace_event_types.h"
-
-#undef TRACE_ZERO_CHAR
-#define TRACE_ZERO_CHAR(arg)
-
-#undef TRACE_FIELD
-#define TRACE_FIELD(type, item, assign)\
-	entry->item = assign;
-
-#undef TRACE_FIELD
-#define TRACE_FIELD(type, item, assign)\
-	entry->item = assign;
-
-#undef TRACE_FIELD_SIGN
-#define TRACE_FIELD_SIGN(type, item, assign, is_signed)	\
-	TRACE_FIELD(type, item, assign)
-
-#undef TP_CMD
-#define TP_CMD(cmd...)	cmd
-
-#undef TRACE_ENTRY
-#define TRACE_ENTRY	entry
-
-#undef TRACE_FIELD_SPECIAL
-#define TRACE_FIELD_SPECIAL(type_item, item, len, cmd)	\
-	cmd;
-
-#undef TRACE_EVENT_FORMAT
-#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt)	\
-int ftrace_define_fields_##call(struct ftrace_event_call *event_call);	\
-static int ftrace_raw_init_event_##call(void);				\
-									\
-struct ftrace_event_call __used						\
-__attribute__((__aligned__(4)))						\
-__attribute__((section("_ftrace_events"))) event_##call = {		\
-	.name			= #call,				\
-	.id			= proto,				\
-	.system			= __stringify(TRACE_SYSTEM),		\
-	.raw_init		= ftrace_raw_init_event_##call,		\
-	.show_format		= ftrace_format_##call,			\
-	.define_fields		= ftrace_define_fields_##call,		\
-};									\
-static int ftrace_raw_init_event_##call(void)				\
-{									\
-	INIT_LIST_HEAD(&event_##call.fields);				\
-	return 0;							\
-}									\
-
-#undef TRACE_EVENT_FORMAT_NOFILTER
-#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct,	\
-				    tpfmt)				\
-									\
-struct ftrace_event_call __used						\
-__attribute__((__aligned__(4)))						\
-__attribute__((section("_ftrace_events"))) event_##call = {		\
-	.name			= #call,				\
-	.id			= proto,				\
-	.system			= __stringify(TRACE_SYSTEM),		\
-	.show_format		= ftrace_format_##call,			\
-};
+#include "trace_entries.h"
 
-#include "trace_event_types.h"
 
-#undef TRACE_FIELD
-#define TRACE_FIELD(type, item, assign)					\
+#undef __field
+#define __field(type, item)						\
 	ret = trace_define_field(event_call, #type, #item,		\
 				 offsetof(typeof(field), item),		\
 				 sizeof(field.item),			\
@@ -162,32 +141,45 @@ __attribute__((section("_ftrace_events"))) event_##call = {		\
 	if (ret)							\
 		return ret;
 
-#undef TRACE_FIELD_SPECIAL
-#define TRACE_FIELD_SPECIAL(type, item, len, cmd)			\
+#undef __field_desc
+#define __field_desc(type, container, item)	\
+	ret = trace_define_field(event_call, #type, #item,		\
+				 offsetof(typeof(field),		\
+					  container.item),		\
+				 sizeof(field.container.item),		\
+				 is_signed_type(type), FILTER_OTHER);	\
+	if (ret)							\
+		return ret;
+
+#undef __array
+#define __array(type, item, len)					\
+	BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);				\
 	ret = trace_define_field(event_call, #type "[" #len "]", #item,	\
 				 offsetof(typeof(field), item),		\
 				 sizeof(field.item), 0, FILTER_OTHER);	\
 	if (ret)							\
 		return ret;
 
-#undef TRACE_FIELD_SIGN
-#define TRACE_FIELD_SIGN(type, item, assign, is_signed)			\
-	ret = trace_define_field(event_call, #type, #item,		\
-				 offsetof(typeof(field), item),		\
-				 sizeof(field.item), is_signed,		\
+#undef __array_desc
+#define __array_desc(type, container, item, len)			\
+	BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);				\
+	ret = trace_define_field(event_call, #type "[" #len "]", #item,	\
+				 offsetof(typeof(field),		\
+					  container.item),		\
+				 sizeof(field.container.item), 0,	\
 				 FILTER_OTHER);				\
 	if (ret)							\
 		return ret;
 
-#undef TRACE_FIELD_ZERO_CHAR
-#define TRACE_FIELD_ZERO_CHAR(item)
+#undef __dynamic_array
+#define __dynamic_array(type, item)
 
-#undef TRACE_EVENT_FORMAT
-#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt)	\
+#undef FTRACE_ENTRY
+#define FTRACE_ENTRY(name, struct_name, id, tstruct, print)		\
 int									\
-ftrace_define_fields_##call(struct ftrace_event_call *event_call)	\
+ftrace_define_fields_##name(struct ftrace_event_call *event_call)	\
 {									\
-	struct args field;						\
+	struct struct_name field;					\
 	int ret;							\
 									\
 	ret = trace_define_common_fields(event_call);			\
@@ -199,8 +191,42 @@ ftrace_define_fields_##call(struct ftrace_event_call *event_call)	\
 	return ret;							\
 }
 
-#undef TRACE_EVENT_FORMAT_NOFILTER
-#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct,	\
-				    tpfmt)
+#include "trace_entries.h"
+
+
+#undef __field
+#define __field(type, item)
+
+#undef __field_desc
+#define __field_desc(type, container, item)
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __array_desc
+#define __array_desc(type, container, item, len)
+
+#undef __dynamic_array
+#define __dynamic_array(type, item)
+
+#undef FTRACE_ENTRY
+#define FTRACE_ENTRY(call, struct_name, type, tstruct, print)		\
+static int ftrace_raw_init_event_##call(void);				\
+									\
+struct ftrace_event_call __used						\
+__attribute__((__aligned__(4)))						\
+__attribute__((section("_ftrace_events"))) event_##call = {		\
+	.name			= #call,				\
+	.id			= type,					\
+	.system			= __stringify(TRACE_SYSTEM),		\
+	.raw_init		= ftrace_raw_init_event_##call,		\
+	.show_format		= ftrace_format_##call,			\
+	.define_fields		= ftrace_define_fields_##call,		\
+};									\
+static int ftrace_raw_init_event_##call(void)				\
+{									\
+	INIT_LIST_HEAD(&event_##call.fields);				\
+	return 0;							\
+}									\
 
-#include "trace_event_types.h"
+#include "trace_entries.h"
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 5b01b94518fc..b3f3776b0cd6 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -290,7 +290,7 @@ ftrace_trace_onoff_print(struct seq_file *m, unsigned long ip,
 {
 	long count = (long)data;
 
-	seq_printf(m, "%pf:", (void *)ip);
+	seq_printf(m, "%ps:", (void *)ip);
 
 	if (ops == &traceon_probe_ops)
 		seq_printf(m, "traceon");
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index b3749a2c3132..45e6c01b2e4d 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -124,7 +124,7 @@ ftrace_pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret,
 	if (unlikely(current->ret_stack[index].fp != frame_pointer)) {
 		ftrace_graph_stop();
 		WARN(1, "Bad frame pointer: expected %lx, received %lx\n"
-		     "  from func %pF return to %lx\n",
+		     "  from func %ps return to %lx\n",
 		     current->ret_stack[index].fp,
 		     frame_pointer,
 		     (void *)current->ret_stack[index].func,
@@ -364,6 +364,15 @@ print_graph_proc(struct trace_seq *s, pid_t pid)
 }
 
 
+static enum print_line_t
+print_graph_lat_fmt(struct trace_seq *s, struct trace_entry *entry)
+{
+	if (!trace_seq_putc(s, ' '))
+		return 0;
+
+	return trace_print_lat_fmt(s, entry);
+}
+
 /* If the pid changed since the last trace, output this event */
 static enum print_line_t
 verif_pid(struct trace_seq *s, pid_t pid, int cpu, struct fgraph_data *data)
@@ -521,6 +530,7 @@ print_graph_irq(struct trace_iterator *iter, unsigned long addr,
 		if (ret == TRACE_TYPE_PARTIAL_LINE)
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
+
 	/* Proc */
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_PROC) {
 		ret = print_graph_proc(s, pid);
@@ -659,7 +669,7 @@ print_graph_entry_leaf(struct trace_iterator *iter,
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
 
-	ret = trace_seq_printf(s, "%pf();\n", (void *)call->func);
+	ret = trace_seq_printf(s, "%ps();\n", (void *)call->func);
 	if (!ret)
 		return TRACE_TYPE_PARTIAL_LINE;
 
@@ -702,7 +712,7 @@ print_graph_entry_nested(struct trace_iterator *iter,
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
 
-	ret = trace_seq_printf(s, "%pf() {\n", (void *)call->func);
+	ret = trace_seq_printf(s, "%ps() {\n", (void *)call->func);
 	if (!ret)
 		return TRACE_TYPE_PARTIAL_LINE;
 
@@ -758,6 +768,13 @@ print_graph_prologue(struct trace_iterator *iter, struct trace_seq *s,
 			return TRACE_TYPE_PARTIAL_LINE;
 	}
 
+	/* Latency format */
+	if (trace_flags & TRACE_ITER_LATENCY_FMT) {
+		ret = print_graph_lat_fmt(s, ent);
+		if (ret == TRACE_TYPE_PARTIAL_LINE)
+			return TRACE_TYPE_PARTIAL_LINE;
+	}
+
 	return 0;
 }
 
@@ -952,28 +969,59 @@ print_graph_function(struct trace_iterator *iter)
 	return TRACE_TYPE_HANDLED;
 }
 
+static void print_lat_header(struct seq_file *s)
+{
+	static const char spaces[] = "                "	/* 16 spaces */
+		"    "					/* 4 spaces */
+		"                 ";			/* 17 spaces */
+	int size = 0;
+
+	if (tracer_flags.val & TRACE_GRAPH_PRINT_ABS_TIME)
+		size += 16;
+	if (tracer_flags.val & TRACE_GRAPH_PRINT_CPU)
+		size += 4;
+	if (tracer_flags.val & TRACE_GRAPH_PRINT_PROC)
+		size += 17;
+
+	seq_printf(s, "#%.*s  _-----=> irqs-off        \n", size, spaces);
+	seq_printf(s, "#%.*s / _----=> need-resched    \n", size, spaces);
+	seq_printf(s, "#%.*s| / _---=> hardirq/softirq \n", size, spaces);
+	seq_printf(s, "#%.*s|| / _--=> preempt-depth   \n", size, spaces);
+	seq_printf(s, "#%.*s||| / _-=> lock-depth      \n", size, spaces);
+	seq_printf(s, "#%.*s|||| /                     \n", size, spaces);
+}
+
 static void print_graph_headers(struct seq_file *s)
 {
+	int lat = trace_flags & TRACE_ITER_LATENCY_FMT;
+
+	if (lat)
+		print_lat_header(s);
+
 	/* 1st line */
-	seq_printf(s, "# ");
+	seq_printf(s, "#");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_ABS_TIME)
 		seq_printf(s, "     TIME       ");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_CPU)
-		seq_printf(s, "CPU");
+		seq_printf(s, " CPU");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_PROC)
-		seq_printf(s, "  TASK/PID      ");
+		seq_printf(s, "  TASK/PID       ");
+	if (lat)
+		seq_printf(s, "|||||");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_DURATION)
 		seq_printf(s, "  DURATION   ");
 	seq_printf(s, "               FUNCTION CALLS\n");
 
 	/* 2nd line */
-	seq_printf(s, "# ");
+	seq_printf(s, "#");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_ABS_TIME)
 		seq_printf(s, "      |         ");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_CPU)
-		seq_printf(s, "|  ");
+		seq_printf(s, " |  ");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_PROC)
-		seq_printf(s, "  |    |        ");
+		seq_printf(s, "   |    |        ");
+	if (lat)
+		seq_printf(s, "|||||");
 	if (tracer_flags.val & TRACE_GRAPH_PRINT_DURATION)
 		seq_printf(s, "   |   |      ");
 	seq_printf(s, "               |   |   |   |\n");
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 5555b75a0d12..3aa7eaa2114c 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -129,15 +129,10 @@ check_critical_timing(struct trace_array *tr,
 		      unsigned long parent_ip,
 		      int cpu)
 {
-	unsigned long latency, t0, t1;
 	cycle_t T0, T1, delta;
 	unsigned long flags;
 	int pc;
 
-	/*
-	 * usecs conversion is slow so we try to delay the conversion
-	 * as long as possible:
-	 */
 	T0 = data->preempt_timestamp;
 	T1 = ftrace_now(cpu);
 	delta = T1-T0;
@@ -157,18 +152,15 @@ check_critical_timing(struct trace_array *tr,
 
 	trace_function(tr, CALLER_ADDR0, parent_ip, flags, pc);
 
-	latency = nsecs_to_usecs(delta);
-
 	if (data->critical_sequence != max_sequence)
 		goto out_unlock;
 
-	tracing_max_latency = delta;
-	t0 = nsecs_to_usecs(T0);
-	t1 = nsecs_to_usecs(T1);
-
 	data->critical_end = parent_ip;
 
-	update_max_tr_single(tr, current, cpu);
+	if (likely(!is_tracing_stopped())) {
+		tracing_max_latency = delta;
+		update_max_tr_single(tr, current, cpu);
+	}
 
 	max_sequence++;
 
diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c
index c4c9bbda53d3..0acd834659ed 100644
--- a/kernel/trace/trace_mmiotrace.c
+++ b/kernel/trace/trace_mmiotrace.c
@@ -307,6 +307,7 @@ static void __trace_mmiotrace_rw(struct trace_array *tr,
 				struct trace_array_cpu *data,
 				struct mmiotrace_rw *rw)
 {
+	struct ftrace_event_call *call = &event_mmiotrace_rw;
 	struct ring_buffer *buffer = tr->buffer;
 	struct ring_buffer_event *event;
 	struct trace_mmiotrace_rw *entry;
@@ -320,7 +321,9 @@ static void __trace_mmiotrace_rw(struct trace_array *tr,
 	}
 	entry	= ring_buffer_event_data(event);
 	entry->rw			= *rw;
-	trace_buffer_unlock_commit(buffer, event, 0, pc);
+
+	if (!filter_check_discard(call, entry, buffer, event))
+		trace_buffer_unlock_commit(buffer, event, 0, pc);
 }
 
 void mmio_trace_rw(struct mmiotrace_rw *rw)
@@ -334,6 +337,7 @@ static void __trace_mmiotrace_map(struct trace_array *tr,
 				struct trace_array_cpu *data,
 				struct mmiotrace_map *map)
 {
+	struct ftrace_event_call *call = &event_mmiotrace_map;
 	struct ring_buffer *buffer = tr->buffer;
 	struct ring_buffer_event *event;
 	struct trace_mmiotrace_map *entry;
@@ -347,7 +351,9 @@ static void __trace_mmiotrace_map(struct trace_array *tr,
 	}
 	entry	= ring_buffer_event_data(event);
 	entry->map			= *map;
-	trace_buffer_unlock_commit(buffer, event, 0, pc);
+
+	if (!filter_check_discard(call, entry, buffer, event))
+		trace_buffer_unlock_commit(buffer, event, 0, pc);
 }
 
 void mmio_trace_mapping(struct mmiotrace_map *map)
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index e0c2545622e8..f572f44c6e1e 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -407,7 +407,7 @@ seq_print_userip_objs(const struct userstack_entry *entry, struct trace_seq *s,
 		 * since individual threads might have already quit!
 		 */
 		rcu_read_lock();
-		task = find_task_by_vpid(entry->ent.tgid);
+		task = find_task_by_vpid(entry->tgid);
 		if (task)
 			mm = get_task_mm(task);
 		rcu_read_unlock();
@@ -460,18 +460,23 @@ seq_print_ip_sym(struct trace_seq *s, unsigned long ip, unsigned long sym_flags)
 	return ret;
 }
 
-static int
-lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu)
+/**
+ * trace_print_lat_fmt - print the irq, preempt and lockdep fields
+ * @s: trace seq struct to write to
+ * @entry: The trace entry field from the ring buffer
+ *
+ * Prints the generic fields of irqs off, in hard or softirq, preempt
+ * count and lock depth.
+ */
+int trace_print_lat_fmt(struct trace_seq *s, struct trace_entry *entry)
 {
 	int hardirq, softirq;
-	char comm[TASK_COMM_LEN];
+	int ret;
 
-	trace_find_cmdline(entry->pid, comm);
 	hardirq = entry->flags & TRACE_FLAG_HARDIRQ;
 	softirq = entry->flags & TRACE_FLAG_SOFTIRQ;
 
-	if (!trace_seq_printf(s, "%8.8s-%-5d %3d%c%c%c",
-			      comm, entry->pid, cpu,
+	if (!trace_seq_printf(s, "%c%c%c",
 			      (entry->flags & TRACE_FLAG_IRQS_OFF) ? 'd' :
 				(entry->flags & TRACE_FLAG_IRQS_NOSUPPORT) ?
 				  'X' : '.',
@@ -481,9 +486,30 @@ lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu)
 				hardirq ? 'h' : softirq ? 's' : '.'))
 		return 0;
 
+	if (entry->lock_depth < 0)
+		ret = trace_seq_putc(s, '.');
+	else
+		ret = trace_seq_printf(s, "%d", entry->lock_depth);
+	if (!ret)
+		return 0;
+
 	if (entry->preempt_count)
 		return trace_seq_printf(s, "%x", entry->preempt_count);
-	return trace_seq_puts(s, ".");
+	return trace_seq_putc(s, '.');
+}
+
+static int
+lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu)
+{
+	char comm[TASK_COMM_LEN];
+
+	trace_find_cmdline(entry->pid, comm);
+
+	if (!trace_seq_printf(s, "%8.8s-%-5d %3d",
+			      comm, entry->pid, cpu))
+		return 0;
+
+	return trace_print_lat_fmt(s, entry);
 }
 
 static unsigned long preempt_mark_thresh = 100;
diff --git a/kernel/trace/trace_output.h b/kernel/trace/trace_output.h
index d38bec4a9c30..9d91c72ba38b 100644
--- a/kernel/trace/trace_output.h
+++ b/kernel/trace/trace_output.h
@@ -26,6 +26,8 @@ extern struct trace_event *ftrace_find_event(int type);
 
 extern enum print_line_t trace_nop_print(struct trace_iterator *iter,
 					 int flags);
+extern int
+trace_print_lat_fmt(struct trace_seq *s, struct trace_entry *entry);
 
 /* used by module unregistering */
 extern int __unregister_ftrace_event(struct trace_event *event);
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index ad69f105a7c6..26185d727676 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -24,6 +24,7 @@ static int __read_mostly	tracer_enabled;
 
 static struct task_struct	*wakeup_task;
 static int			wakeup_cpu;
+static int			wakeup_current_cpu;
 static unsigned			wakeup_prio = -1;
 static int			wakeup_rt;
 
@@ -56,33 +57,23 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 	resched = ftrace_preempt_disable();
 
 	cpu = raw_smp_processor_id();
+	if (cpu != wakeup_current_cpu)
+		goto out_enable;
+
 	data = tr->data[cpu];
 	disabled = atomic_inc_return(&data->disabled);
 	if (unlikely(disabled != 1))
 		goto out;
 
 	local_irq_save(flags);
-	__raw_spin_lock(&wakeup_lock);
-
-	if (unlikely(!wakeup_task))
-		goto unlock;
-
-	/*
-	 * The task can't disappear because it needs to
-	 * wake up first, and we have the wakeup_lock.
-	 */
-	if (task_cpu(wakeup_task) != cpu)
-		goto unlock;
 
 	trace_function(tr, ip, parent_ip, flags, pc);
 
- unlock:
-	__raw_spin_unlock(&wakeup_lock);
 	local_irq_restore(flags);
 
  out:
 	atomic_dec(&data->disabled);
-
+ out_enable:
 	ftrace_preempt_enable(resched);
 }
 
@@ -107,11 +98,18 @@ static int report_latency(cycle_t delta)
 	return 1;
 }
 
+static void probe_wakeup_migrate_task(struct task_struct *task, int cpu)
+{
+	if (task != wakeup_task)
+		return;
+
+	wakeup_current_cpu = cpu;
+}
+
 static void notrace
 probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
 	struct task_struct *next)
 {
-	unsigned long latency = 0, t0 = 0, t1 = 0;
 	struct trace_array_cpu *data;
 	cycle_t T0, T1, delta;
 	unsigned long flags;
@@ -157,10 +155,6 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
 	trace_function(wakeup_trace, CALLER_ADDR0, CALLER_ADDR1, flags, pc);
 	tracing_sched_switch_trace(wakeup_trace, prev, next, flags, pc);
 
-	/*
-	 * usecs conversion is slow so we try to delay the conversion
-	 * as long as possible:
-	 */
 	T0 = data->preempt_timestamp;
 	T1 = ftrace_now(cpu);
 	delta = T1-T0;
@@ -168,13 +162,10 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
 	if (!report_latency(delta))
 		goto out_unlock;
 
-	latency = nsecs_to_usecs(delta);
-
-	tracing_max_latency = delta;
-	t0 = nsecs_to_usecs(T0);
-	t1 = nsecs_to_usecs(T1);
-
-	update_max_tr(wakeup_trace, wakeup_task, wakeup_cpu);
+	if (likely(!is_tracing_stopped())) {
+		tracing_max_latency = delta;
+		update_max_tr(wakeup_trace, wakeup_task, wakeup_cpu);
+	}
 
 out_unlock:
 	__wakeup_reset(wakeup_trace);
@@ -244,6 +235,7 @@ probe_wakeup(struct rq *rq, struct task_struct *p, int success)
 	__wakeup_reset(wakeup_trace);
 
 	wakeup_cpu = task_cpu(p);
+	wakeup_current_cpu = wakeup_cpu;
 	wakeup_prio = p->prio;
 
 	wakeup_task = p;
@@ -293,6 +285,13 @@ static void start_wakeup_tracer(struct trace_array *tr)
 		goto fail_deprobe_wake_new;
 	}
 
+	ret = register_trace_sched_migrate_task(probe_wakeup_migrate_task);
+	if (ret) {
+		pr_info("wakeup trace: Couldn't activate tracepoint"
+			" probe to kernel_sched_migrate_task\n");
+		return;
+	}
+
 	wakeup_reset(tr);
 
 	/*
@@ -325,6 +324,7 @@ static void stop_wakeup_tracer(struct trace_array *tr)
 	unregister_trace_sched_switch(probe_wakeup_sched_switch);
 	unregister_trace_sched_wakeup_new(probe_wakeup);
 	unregister_trace_sched_wakeup(probe_wakeup);
+	unregister_trace_sched_migrate_task(probe_wakeup_migrate_task);
 }
 
 static int __wakeup_tracer_init(struct trace_array *tr)
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index cb8a112030bb..d320c1816a7b 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -581,7 +581,7 @@ static char *symbol_string(char *buf, char *end, void *ptr,
 	unsigned long value = (unsigned long) ptr;
 #ifdef CONFIG_KALLSYMS
 	char sym[KSYM_SYMBOL_LEN];
-	if (ext != 'f')
+	if (ext != 'f' && ext != 's')
 		sprint_symbol(sym, value);
 	else
 		kallsyms_lookup(value, NULL, NULL, NULL, sym);
@@ -794,7 +794,8 @@ static char *ip4_addr_string(char *buf, char *end, const u8 *addr,
  *
  * - 'F' For symbolic function descriptor pointers with offset
  * - 'f' For simple symbolic function names without offset
- * - 'S' For symbolic direct pointers
+ * - 'S' For symbolic direct pointers with offset
+ * - 's' For symbolic direct pointers without offset
  * - 'R' For a struct resource pointer, it prints the range of
  *       addresses (not the name nor the flags)
  * - 'M' For a 6-byte MAC address, it prints the address in the
@@ -822,6 +823,7 @@ static char *pointer(const char *fmt, char *buf, char *end, void *ptr,
 	case 'F':
 	case 'f':
 		ptr = dereference_function_descriptor(ptr);
+	case 's':
 		/* Fallthrough */
 	case 'S':
 		return symbol_string(buf, end, ptr, spec, *fmt);
@@ -1063,10 +1065,12 @@ qualifier:
  * @args: Arguments for the format string
  *
  * This function follows C99 vsnprintf, but has some extensions:
- * %pS output the name of a text symbol
+ * %pS output the name of a text symbol with offset
+ * %ps output the name of a text symbol without offset
  * %pF output the name of a function pointer with its offset
  * %pf output the name of a function pointer without its offset
  * %pR output the address range in a struct resource
+ * %n is ignored
  *
  * The return value is the number of characters which would
  * be generated for the given input, excluding the trailing
@@ -1522,11 +1526,7 @@ EXPORT_SYMBOL_GPL(vbin_printf);
  * a binary buffer that generated by vbin_printf.
  *
  * The format follows C99 vsnprintf, but has some extensions:
- * %pS output the name of a text symbol
- * %pF output the name of a function pointer with its offset
- * %pf output the name of a function pointer without its offset
- * %pR output the address range in a struct resource
- * %n is ignored
+ *  see vsnprintf comment for details.
  *
  * The return value is the number of characters which would
  * be generated for the given input, excluding the trailing
diff --git a/mm/memory.c b/mm/memory.c
index aede2ce3aba4..e8f63d9961ea 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -56,6 +56,7 @@
 #include <linux/swapops.h>
 #include <linux/elf.h>
 
+#include <asm/io.h>
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
 #include <asm/tlb.h>
diff --git a/mm/mmap.c b/mm/mmap.c
index 8101de490c73..26892e346d8f 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -905,7 +905,7 @@ void vm_stat_account(struct mm_struct *mm, unsigned long flags,
 #endif /* CONFIG_PROC_FS */
 
 /*
- * The caller must hold down_write(current->mm->mmap_sem).
+ * The caller must hold down_write(&current->mm->mmap_sem).
  */
 
 unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 4a6ff2ba4d07..b1a4290996b5 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1372,7 +1372,7 @@ static int atalk_route_packet(struct sk_buff *skb, struct net_device *dev,
 
 	if (aarp_send_ddp(rt->dev, skb, &ta, NULL) == NET_XMIT_DROP)
 		return NET_RX_DROP;
-	return NET_XMIT_SUCCESS;
+	return NET_RX_SUCCESS;
 free_it:
 	kfree_skb(skb);
 drop:
diff --git a/net/can/af_can.c b/net/can/af_can.c
index ef1c43a2ed56..606832115674 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -199,6 +199,8 @@ static int can_create(struct net *net, struct socket *sock, int protocol)
  * @skb: pointer to socket buffer with CAN frame in data section
  * @loop: loopback for listeners on local CAN sockets (recommended default!)
  *
+ * Due to the loopback this routine must not be called from hardirq context.
+ *
  * Return:
  *  0 on success
  *  -ENETDOWN when the selected interface is down
@@ -278,7 +280,7 @@ int can_send(struct sk_buff *skb, int loop)
 	}
 
 	if (newskb)
-		netif_rx(newskb);
+		netif_rx_ni(newskb);
 
 	/* update statistics */
 	can_stats.tx_frames++;
diff --git a/net/core/dev.c b/net/core/dev.c
index 84945470ab38..560c8c9c03ab 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1017,9 +1017,9 @@ void netdev_state_change(struct net_device *dev)
 }
 EXPORT_SYMBOL(netdev_state_change);
 
-void netdev_bonding_change(struct net_device *dev)
+void netdev_bonding_change(struct net_device *dev, unsigned long event)
 {
-	call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, dev);
+	call_netdevice_notifiers(event, dev);
 }
 EXPORT_SYMBOL(netdev_bonding_change);
 
diff --git a/net/dccp/ccids/Kconfig b/net/dccp/ccids/Kconfig
index 4b5db44970aa..8408398cd44e 100644
--- a/net/dccp/ccids/Kconfig
+++ b/net/dccp/ccids/Kconfig
@@ -66,9 +66,9 @@ config IP_DCCP_CCID3_RTO
 	    A value of 0 disables this feature by enforcing the value specified
 	    in RFC 3448. The following values have been suggested as bounds for
 	    experimental use:
-	    	* 16-20ms to match the typical multimedia inter-frame interval
-	    	* 100ms as a reasonable compromise [default]
-	    	* 1000ms corresponds to the lower TCP RTO bound (RFC 2988, 2.4)
+		* 16-20ms to match the typical multimedia inter-frame interval
+		* 100ms as a reasonable compromise [default]
+		* 1000ms corresponds to the lower TCP RTO bound (RFC 2988, 2.4)
 
 	    The default of 100ms is a compromise between a large value for
 	    efficient DCCP implementations, and a small value to avoid disrupting
diff --git a/net/dccp/ccids/ccid2.c b/net/dccp/ccids/ccid2.c
index d235294ace23..e8cf99e880b0 100644
--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -1,6 +1,4 @@
 /*
- *  net/dccp/ccids/ccid2.c
- *
  *  Copyright (c) 2005, 2006 Andrea Bittau <a.bittau@cs.ucl.ac.uk>
  *
  *  Changes to meet Linux coding standards, and DCCP infrastructure fixes.
diff --git a/net/dccp/ccids/ccid2.h b/net/dccp/ccids/ccid2.h
index 2c94ca029010..326ac90fb909 100644
--- a/net/dccp/ccids/ccid2.h
+++ b/net/dccp/ccids/ccid2.h
@@ -1,6 +1,4 @@
 /*
- *  net/dccp/ccids/ccid2.h
- *
  *  Copyright (c) 2005 Andrea Bittau <a.bittau@cs.ucl.ac.uk>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -40,14 +38,14 @@ struct ccid2_seq {
 #define CCID2_SEQBUF_LEN 1024
 #define CCID2_SEQBUF_MAX 128
 
-/** struct ccid2_hc_tx_sock - CCID2 TX half connection
- *
+/**
+ * struct ccid2_hc_tx_sock - CCID2 TX half connection
  * @ccid2hctx_{cwnd,ssthresh,pipe}: as per RFC 4341, section 5
  * @ccid2hctx_packets_acked - Ack counter for deriving cwnd growth (RFC 3465)
  * @ccid2hctx_lastrtt -time RTT was last measured
  * @ccid2hctx_rpseq - last consecutive seqno
  * @ccid2hctx_rpdupack - dupacks since rpseq
-*/
+ */
 struct ccid2_hc_tx_sock {
 	u32			ccid2hctx_cwnd;
 	u32			ccid2hctx_ssthresh;
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index f596ce149c3c..34dcc798c457 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -1,6 +1,4 @@
 /*
- *  net/dccp/ccids/ccid3.c
- *
  *  Copyright (c) 2007   The University of Aberdeen, Scotland, UK
  *  Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
  *  Copyright (c) 2005-7 Ian McDonald <ian.mcdonald@jandi.co.nz>
@@ -750,7 +748,8 @@ static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb)
 	return 0;
 }
 
-/** ccid3_first_li  -  Implements [RFC 3448, 6.3.1]
+/**
+ * ccid3_first_li  -  Implements [RFC 5348, 6.3.1]
  *
  * Determine the length of the first loss interval via inverse lookup.
  * Assume that X_recv can be computed by the throughput equation
diff --git a/net/dccp/ccids/ccid3.h b/net/dccp/ccids/ccid3.h
index 49ca32bd7e79..e5a244143846 100644
--- a/net/dccp/ccids/ccid3.h
+++ b/net/dccp/ccids/ccid3.h
@@ -1,6 +1,4 @@
 /*
- *  net/dccp/ccids/ccid3.h
- *
  *  Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
  *  Copyright (c) 2007   The University of Aberdeen, Scotland, UK
  *
@@ -75,8 +73,8 @@ enum ccid3_hc_tx_states {
 	TFRC_SSTATE_TERM,
 };
 
-/** struct ccid3_hc_tx_sock - CCID3 sender half-connection socket
- *
+/**
+ * struct ccid3_hc_tx_sock - CCID3 sender half-connection socket
  * @ccid3hctx_x - Current sending rate in 64 * bytes per second
  * @ccid3hctx_x_recv - Receive rate    in 64 * bytes per second
  * @ccid3hctx_x_calc - Calculated rate in bytes per second
@@ -119,9 +117,9 @@ struct ccid3_hc_tx_sock {
 
 static inline struct ccid3_hc_tx_sock *ccid3_hc_tx_sk(const struct sock *sk)
 {
-    struct ccid3_hc_tx_sock *hctx = ccid_priv(dccp_sk(sk)->dccps_hc_tx_ccid);
-    BUG_ON(hctx == NULL);
-    return hctx;
+	struct ccid3_hc_tx_sock *hctx = ccid_priv(dccp_sk(sk)->dccps_hc_tx_ccid);
+	BUG_ON(hctx == NULL);
+	return hctx;
 }
 
 /* TFRC receiver states */
@@ -131,22 +129,22 @@ enum ccid3_hc_rx_states {
 	TFRC_RSTATE_TERM    = 127,
 };
 
-/** struct ccid3_hc_rx_sock - CCID3 receiver half-connection socket
- *
- *  @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448 4.3)
- *  @ccid3hcrx_rtt  -  Receiver estimate of rtt (non-standard)
- *  @ccid3hcrx_p  -  Current loss event rate (RFC 3448 5.4)
- *  @ccid3hcrx_last_counter  -  Tracks window counter (RFC 4342, 8.1)
- *  @ccid3hcrx_state  -  Receiver state, one of %ccid3_hc_rx_states
- *  @ccid3hcrx_bytes_recv  -  Total sum of DCCP payload bytes
- *  @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448, sec. 4.3)
- *  @ccid3hcrx_rtt  -  Receiver estimate of RTT
- *  @ccid3hcrx_tstamp_last_feedback  -  Time at which last feedback was sent
- *  @ccid3hcrx_tstamp_last_ack  -  Time at which last feedback was sent
- *  @ccid3hcrx_hist  -  Packet history (loss detection + RTT sampling)
- *  @ccid3hcrx_li_hist  -  Loss Interval database
- *  @ccid3hcrx_s  -  Received packet size in bytes
- *  @ccid3hcrx_pinv  -  Inverse of Loss Event Rate (RFC 4342, sec. 8.5)
+/**
+ * struct ccid3_hc_rx_sock - CCID3 receiver half-connection socket
+ * @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448 4.3)
+ * @ccid3hcrx_rtt  -  Receiver estimate of rtt (non-standard)
+ * @ccid3hcrx_p  -  Current loss event rate (RFC 3448 5.4)
+ * @ccid3hcrx_last_counter  -  Tracks window counter (RFC 4342, 8.1)
+ * @ccid3hcrx_state  -  Receiver state, one of %ccid3_hc_rx_states
+ * @ccid3hcrx_bytes_recv  -  Total sum of DCCP payload bytes
+ * @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448, sec. 4.3)
+ * @ccid3hcrx_rtt  -  Receiver estimate of RTT
+ * @ccid3hcrx_tstamp_last_feedback  -  Time at which last feedback was sent
+ * @ccid3hcrx_tstamp_last_ack  -  Time at which last feedback was sent
+ * @ccid3hcrx_hist  -  Packet history (loss detection + RTT sampling)
+ * @ccid3hcrx_li_hist  -  Loss Interval database
+ * @ccid3hcrx_s  -  Received packet size in bytes
+ * @ccid3hcrx_pinv  -  Inverse of Loss Event Rate (RFC 4342, sec. 8.5)
  */
 struct ccid3_hc_rx_sock {
 	u8				ccid3hcrx_last_counter:4;
@@ -163,9 +161,9 @@ struct ccid3_hc_rx_sock {
 
 static inline struct ccid3_hc_rx_sock *ccid3_hc_rx_sk(const struct sock *sk)
 {
-    struct ccid3_hc_rx_sock *hcrx = ccid_priv(dccp_sk(sk)->dccps_hc_rx_ccid);
-    BUG_ON(hcrx == NULL);
-    return hcrx;
+	struct ccid3_hc_rx_sock *hcrx = ccid_priv(dccp_sk(sk)->dccps_hc_rx_ccid);
+	BUG_ON(hcrx == NULL);
+	return hcrx;
 }
 
 #endif /* _DCCP_CCID3_H_ */
diff --git a/net/dccp/ccids/lib/loss_interval.c b/net/dccp/ccids/lib/loss_interval.c
index 4d1e40127264..8fc3cbf79071 100644
--- a/net/dccp/ccids/lib/loss_interval.c
+++ b/net/dccp/ccids/lib/loss_interval.c
@@ -1,6 +1,4 @@
 /*
- *  net/dccp/ccids/lib/loss_interval.c
- *
  *  Copyright (c) 2007   The University of Aberdeen, Scotland, UK
  *  Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
  *  Copyright (c) 2005-7 Ian McDonald <ian.mcdonald@jandi.co.nz>
@@ -21,7 +19,7 @@ static const int tfrc_lh_weights[NINTERVAL] = { 10, 10, 10, 10, 8, 6, 4, 2 };
 /* implements LIFO semantics on the array */
 static inline u8 LIH_INDEX(const u8 ctr)
 {
-	return (LIH_SIZE - 1 - (ctr % LIH_SIZE));
+	return LIH_SIZE - 1 - (ctr % LIH_SIZE);
 }
 
 /* the `counter' index always points at the next entry to be populated */
@@ -129,7 +127,8 @@ static inline u8 tfrc_lh_is_new_loss(struct tfrc_loss_interval *cur,
 		(cur->li_is_closed || SUB16(new_loss->tfrchrx_ccval, cur->li_ccval) > 4);
 }
 
-/** tfrc_lh_interval_add  -  Insert new record into the Loss Interval database
+/**
+ * tfrc_lh_interval_add  -  Insert new record into the Loss Interval database
  * @lh:		   Loss Interval database
  * @rh:		   Receive history containing a fresh loss event
  * @calc_first_li: Caller-dependent routine to compute length of first interval
diff --git a/net/dccp/ccids/lib/loss_interval.h b/net/dccp/ccids/lib/loss_interval.h
index 246018a3b269..d1d2f5383b7d 100644
--- a/net/dccp/ccids/lib/loss_interval.h
+++ b/net/dccp/ccids/lib/loss_interval.h
@@ -1,8 +1,6 @@
 #ifndef _DCCP_LI_HIST_
 #define _DCCP_LI_HIST_
 /*
- *  net/dccp/ccids/lib/loss_interval.h
- *
  *  Copyright (c) 2007   The University of Aberdeen, Scotland, UK
  *  Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
  *  Copyright (c) 2005-7 Ian McDonald <ian.mcdonald@jandi.co.nz>
diff --git a/net/dccp/ccids/lib/packet_history.c b/net/dccp/ccids/lib/packet_history.c
index b7785b3581ec..3a4f414e94a0 100644
--- a/net/dccp/ccids/lib/packet_history.c
+++ b/net/dccp/ccids/lib/packet_history.c
@@ -1,6 +1,4 @@
 /*
- *  net/dccp/packet_history.c
- *
  *  Copyright (c) 2007   The University of Aberdeen, Scotland, UK
  *  Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
  *
@@ -128,7 +126,7 @@ u32 tfrc_tx_hist_rtt(struct tfrc_tx_hist_entry *head, const u64 seqno,
 
 
 /*
- * 	Receiver History Routines
+ *	Receiver History Routines
  */
 static struct kmem_cache *tfrc_rx_hist_slab;
 
diff --git a/net/dccp/ccids/lib/packet_history.h b/net/dccp/ccids/lib/packet_history.h
index 461cc91cce88..7df6c5299999 100644
--- a/net/dccp/ccids/lib/packet_history.h
+++ b/net/dccp/ccids/lib/packet_history.h
@@ -70,7 +70,6 @@ struct tfrc_rx_hist_entry {
 
 /**
  * tfrc_rx_hist  -  RX history structure for TFRC-based protocols
- *
  * @ring:		Packet history for RTT sampling and loss detection
  * @loss_count:		Number of entries in circular history
  * @loss_start:		Movable index (for loss detection)
diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h
index e9720b143275..01bb48e96c2e 100644
--- a/net/dccp/ccids/lib/tfrc.h
+++ b/net/dccp/ccids/lib/tfrc.h
@@ -1,8 +1,6 @@
 #ifndef _TFRC_H_
 #define _TFRC_H_
 /*
- *  net/dccp/ccids/lib/tfrc.h
- *
  *  Copyright (c) 2007   The University of Aberdeen, Scotland, UK
  *  Copyright (c) 2005-6 The University of Waikato, Hamilton, New Zealand.
  *  Copyright (c) 2005-6 Ian McDonald <ian.mcdonald@jandi.co.nz>
@@ -32,7 +30,7 @@ extern int tfrc_debug;
 /* integer-arithmetic divisions of type (a * 1000000)/b */
 static inline u64 scaled_div(u64 a, u64 b)
 {
-	BUG_ON(b==0);
+	BUG_ON(b == 0);
 	return div64_u64(a * 1000000, b);
 }
 
diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c
index c5d3a9e5a5a4..22ca1cf0eb55 100644
--- a/net/dccp/ccids/lib/tfrc_equation.c
+++ b/net/dccp/ccids/lib/tfrc_equation.c
@@ -1,6 +1,4 @@
 /*
- *  net/dccp/ccids/lib/tfrc_equation.c
- *
  *  Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
  *  Copyright (c) 2005 Ian McDonald <ian.mcdonald@jandi.co.nz>
  *  Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
@@ -79,10 +77,10 @@
     }
 
   With the given configuration, we have, with M = TFRC_CALC_X_ARRSIZE-1,
-    lookup[0][0]  =  g(1000000/(M+1)) 		 =  1000000 * f(0.2%)
-    lookup[M][0]  =  g(1000000)			 =  1000000 * f(100%)
-    lookup[0][1]  =  g(TFRC_SMALLEST_P)		  = 1000000 * f(0.01%)
-    lookup[M][1]  =  g(TFRC_CALC_X_SPLIT)	 =  1000000 * f(5%)
+    lookup[0][0]  =  g(1000000/(M+1))		= 1000000 * f(0.2%)
+    lookup[M][0]  =  g(1000000)			= 1000000 * f(100%)
+    lookup[0][1]  =  g(TFRC_SMALLEST_P)		= 1000000 * f(0.01%)
+    lookup[M][1]  =  g(TFRC_CALC_X_SPLIT)	= 1000000 * f(5%)
 
   In summary, the two columns represent f(p) for the following ranges:
     * The first column is for   0.002  <= p <= 1.0
@@ -610,11 +608,10 @@ static inline u32 tfrc_binsearch(u32 fval, u8 small)
 
 /**
  * tfrc_calc_x - Calculate the send rate as per section 3.1 of RFC3448
- *
- *  @s: packet size          in bytes
- *  @R: RTT                  scaled by 1000000   (i.e., microseconds)
- *  @p: loss ratio estimate  scaled by 1000000
- *  Returns X_calc           in bytes per second (not scaled).
+ * @s: packet size          in bytes
+ * @R: RTT                  scaled by 1000000   (i.e., microseconds)
+ * @p: loss ratio estimate  scaled by 1000000
+ * Returns X_calc           in bytes per second (not scaled).
  */
 u32 tfrc_calc_x(u16 s, u32 R, u32 p)
 {
@@ -630,17 +627,17 @@ u32 tfrc_calc_x(u16 s, u32 R, u32 p)
 		return ~0U;
 	}
 
-	if (p <= TFRC_CALC_X_SPLIT) 		{     /* 0.0000 < p <= 0.05   */
+	if (p <= TFRC_CALC_X_SPLIT)		{     /* 0.0000 < p <= 0.05   */
 		if (p < TFRC_SMALLEST_P) {	      /* 0.0000 < p <  0.0001 */
 			DCCP_WARN("Value of p (%d) below resolution. "
 				  "Substituting %d\n", p, TFRC_SMALLEST_P);
 			index = 0;
-		} else 				      /* 0.0001 <= p <= 0.05  */
+		} else				      /* 0.0001 <= p <= 0.05  */
 			index =  p/TFRC_SMALLEST_P - 1;
 
 		f = tfrc_calc_x_lookup[index][1];
 
-	} else {	 			      /* 0.05   <  p <= 1.00  */
+	} else {				      /* 0.05   <  p <= 1.00  */
 		index = p/(1000000/TFRC_CALC_X_ARRSIZE) - 1;
 
 		f = tfrc_calc_x_lookup[index][0];
@@ -661,7 +658,6 @@ u32 tfrc_calc_x(u16 s, u32 R, u32 p)
 
 /**
  *  tfrc_calc_x_reverse_lookup  -  try to find p given f(p)
- *
  *  @fvalue: function value to match, scaled by 1000000
  *  Returns closest match for p, also scaled by 1000000
  */
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index d01c00de1ad0..7302e1498d46 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -948,7 +948,7 @@ static struct proto dccp_v4_prot = {
 #endif
 };
 
-static struct net_protocol dccp_v4_protocol = {
+static const struct net_protocol dccp_v4_protocol = {
 	.handler	= dccp_v4_rcv,
 	.err_handler	= dccp_v4_err,
 	.no_policy	= 1,
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 64f011cc4491..e48ca5d45658 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -1152,13 +1152,13 @@ static struct proto dccp_v6_prot = {
 #endif
 };
 
-static struct inet6_protocol dccp_v6_protocol = {
+static const struct inet6_protocol dccp_v6_protocol = {
 	.handler	= dccp_v6_rcv,
 	.err_handler	= dccp_v6_err,
 	.flags		= INET6_PROTO_NOPOLICY | INET6_PROTO_FINAL,
 };
 
-static struct proto_ops inet6_dccp_ops = {
+static const struct proto_ops inet6_dccp_ops = {
 	.family		   = PF_INET6,
 	.owner		   = THIS_MODULE,
 	.release	   = inet6_release,
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index 77ae6852b93d..51593a48f2dd 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -414,7 +414,7 @@ static int dgram_getsockopt(struct sock *sk, int level, int optname,
 }
 
 static int dgram_setsockopt(struct sock *sk, int level, int optname,
-		    char __user *optval, int __user optlen)
+		    char __user *optval, int optlen)
 {
 	struct dgram_sock *ro = dgram_sk(sk);
 	int val;
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
index 2106ecbf0308..ca767bde17a4 100644
--- a/net/ieee802154/netlink.c
+++ b/net/ieee802154/netlink.c
@@ -35,6 +35,7 @@
 #include <net/ieee802154_netdev.h>
 
 static unsigned int ieee802154_seq_num;
+static DEFINE_SPINLOCK(ieee802154_seq_lock);
 
 static struct genl_family ieee802154_coordinator_family = {
 	.id		= GENL_ID_GENERATE,
@@ -57,12 +58,15 @@ static struct sk_buff *ieee802154_nl_create(int flags, u8 req)
 {
 	void *hdr;
 	struct sk_buff *msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+	unsigned long f;
 
 	if (!msg)
 		return NULL;
 
+	spin_lock_irqsave(&ieee802154_seq_lock, f);
 	hdr = genlmsg_put(msg, 0, ieee802154_seq_num++,
 			&ieee802154_coordinator_family, flags, req);
+	spin_unlock_irqrestore(&ieee802154_seq_lock, f);
 	if (!hdr) {
 		nlmsg_free(msg);
 		return NULL;
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
index 4681501aae93..13198859982e 100644
--- a/net/ieee802154/raw.c
+++ b/net/ieee802154/raw.c
@@ -244,7 +244,7 @@ static int raw_getsockopt(struct sock *sk, int level, int optname,
 }
 
 static int raw_setsockopt(struct sock *sk, int level, int optname,
-		    char __user *optval, int __user optlen)
+		    char __user *optval, int optlen)
 {
 	return -EOPNOTSUPP;
 }
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 6c30a73f03f5..58c4b0f7c4aa 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -244,7 +244,7 @@ EXPORT_SYMBOL(build_ehash_secret);
 static inline int inet_netns_ok(struct net *net, int protocol)
 {
 	int hash;
-	struct net_protocol *ipprot;
+	const struct net_protocol *ipprot;
 
 	if (net_eq(net, &init_net))
 		return 1;
@@ -1162,7 +1162,7 @@ EXPORT_SYMBOL(inet_sk_rebuild_header);
 static int inet_gso_send_check(struct sk_buff *skb)
 {
 	struct iphdr *iph;
-	struct net_protocol *ops;
+	const struct net_protocol *ops;
 	int proto;
 	int ihl;
 	int err = -EINVAL;
@@ -1198,7 +1198,7 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb, int features)
 {
 	struct sk_buff *segs = ERR_PTR(-EINVAL);
 	struct iphdr *iph;
-	struct net_protocol *ops;
+	const struct net_protocol *ops;
 	int proto;
 	int ihl;
 	int id;
@@ -1265,7 +1265,7 @@ out:
 static struct sk_buff **inet_gro_receive(struct sk_buff **head,
 					 struct sk_buff *skb)
 {
-	struct net_protocol *ops;
+	const struct net_protocol *ops;
 	struct sk_buff **pp = NULL;
 	struct sk_buff *p;
 	struct iphdr *iph;
@@ -1342,7 +1342,7 @@ out:
 
 static int inet_gro_complete(struct sk_buff *skb)
 {
-	struct net_protocol *ops;
+	const struct net_protocol *ops;
 	struct iphdr *iph = ip_hdr(skb);
 	int proto = iph->protocol & (MAX_INET_PROTOS - 1);
 	int err = -ENOSYS;
@@ -1427,13 +1427,13 @@ void snmp_mib_free(void *ptr[2])
 EXPORT_SYMBOL_GPL(snmp_mib_free);
 
 #ifdef CONFIG_IP_MULTICAST
-static struct net_protocol igmp_protocol = {
+static const struct net_protocol igmp_protocol = {
 	.handler =	igmp_rcv,
 	.netns_ok =	1,
 };
 #endif
 
-static struct net_protocol tcp_protocol = {
+static const struct net_protocol tcp_protocol = {
 	.handler =	tcp_v4_rcv,
 	.err_handler =	tcp_v4_err,
 	.gso_send_check = tcp_v4_gso_send_check,
@@ -1444,7 +1444,7 @@ static struct net_protocol tcp_protocol = {
 	.netns_ok =	1,
 };
 
-static struct net_protocol udp_protocol = {
+static const struct net_protocol udp_protocol = {
 	.handler =	udp_rcv,
 	.err_handler =	udp_err,
 	.gso_send_check = udp4_ufo_send_check,
@@ -1453,7 +1453,7 @@ static struct net_protocol udp_protocol = {
 	.netns_ok =	1,
 };
 
-static struct net_protocol icmp_protocol = {
+static const struct net_protocol icmp_protocol = {
 	.handler =	icmp_rcv,
 	.no_policy =	1,
 	.netns_ok =	1,
diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index e878e494296e..5c662703eb1e 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -311,7 +311,7 @@ static const struct xfrm_type ah_type =
 	.output		= ah_output
 };
 
-static struct net_protocol ah4_protocol = {
+static const struct net_protocol ah4_protocol = {
 	.handler	=	xfrm4_rcv,
 	.err_handler	=	ah4_err,
 	.no_policy	=	1,
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 3863c3a4223f..07336c6201f0 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1087,6 +1087,12 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 	case NETDEV_DOWN:
 		ip_mc_down(in_dev);
 		break;
+	case NETDEV_BONDING_OLDTYPE:
+		ip_mc_unmap(in_dev);
+		break;
+	case NETDEV_BONDING_NEWTYPE:
+		ip_mc_remap(in_dev);
+		break;
 	case NETDEV_CHANGEMTU:
 		if (inetdev_valid_mtu(dev->mtu))
 			break;
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 18bb383ea393..12f7287e902d 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -615,7 +615,7 @@ static const struct xfrm_type esp_type =
 	.output		= esp_output
 };
 
-static struct net_protocol esp4_protocol = {
+static const struct net_protocol esp4_protocol = {
 	.handler	=	xfrm4_rcv,
 	.err_handler	=	esp4_err,
 	.no_policy	=	1,
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 97c410e84388..5bc13fe816d1 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -655,7 +655,7 @@ static void icmp_unreach(struct sk_buff *skb)
 	struct iphdr *iph;
 	struct icmphdr *icmph;
 	int hash, protocol;
-	struct net_protocol *ipprot;
+	const struct net_protocol *ipprot;
 	u32 info = 0;
 	struct net *net;
 
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 01b4284ed694..d41e5de79a82 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -1298,6 +1298,28 @@ void ip_mc_dec_group(struct in_device *in_dev, __be32 addr)
 	}
 }
 
+/* Device changing type */
+
+void ip_mc_unmap(struct in_device *in_dev)
+{
+	struct ip_mc_list *i;
+
+	ASSERT_RTNL();
+
+	for (i = in_dev->mc_list; i; i = i->next)
+		igmp_group_dropped(i);
+}
+
+void ip_mc_remap(struct in_device *in_dev)
+{
+	struct ip_mc_list *i;
+
+	ASSERT_RTNL();
+
+	for (i = in_dev->mc_list; i; i = i->next)
+		igmp_group_added(i);
+}
+
 /* Device going down */
 
 void ip_mc_down(struct in_device *in_dev)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 533afaadefd4..d9645c94a067 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -1288,7 +1288,7 @@ static void ipgre_fb_tunnel_init(struct net_device *dev)
 }
 
 
-static struct net_protocol ipgre_protocol = {
+static const struct net_protocol ipgre_protocol = {
 	.handler	=	ipgre_rcv,
 	.err_handler	=	ipgre_err,
 	.netns_ok	=	1,
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index db46b4b5b2b9..6c98b43badf4 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -202,7 +202,7 @@ static int ip_local_deliver_finish(struct sk_buff *skb)
 	{
 		int protocol = ip_hdr(skb)->protocol;
 		int hash, raw;
-		struct net_protocol *ipprot;
+		const struct net_protocol *ipprot;
 
 	resubmit:
 		raw = raw_local_deliver(skb, protocol);
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index 3262ce06294c..38fbf04150ae 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -146,7 +146,7 @@ static const struct xfrm_type ipcomp_type = {
 	.output		= ipcomp_output
 };
 
-static struct net_protocol ipcomp4_protocol = {
+static const struct net_protocol ipcomp4_protocol = {
 	.handler	=	xfrm4_rcv,
 	.err_handler	=	ipcomp4_err,
 	.no_policy	=	1,
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 65d421cf5bc7..c43ec2d51ce2 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -99,10 +99,6 @@ static int ipmr_cache_report(struct net *net,
 			     struct sk_buff *pkt, vifi_t vifi, int assert);
 static int ipmr_fill_mroute(struct sk_buff *skb, struct mfc_cache *c, struct rtmsg *rtm);
 
-#ifdef CONFIG_IP_PIMSM_V2
-static struct net_protocol pim_protocol;
-#endif
-
 static struct timer_list ipmr_expire_timer;
 
 /* Service routines creating virtual interfaces: DVMRP tunnels and PIMREG */
@@ -1945,7 +1941,7 @@ static const struct file_operations ipmr_mfc_fops = {
 #endif
 
 #ifdef CONFIG_IP_PIMSM_V2
-static struct net_protocol pim_protocol = {
+static const struct net_protocol pim_protocol = {
 	.handler	=	pim_rcv,
 	.netns_ok	=	1,
 };
diff --git a/net/ipv4/protocol.c b/net/ipv4/protocol.c
index a2e5fc0a15e1..542f22fc98b3 100644
--- a/net/ipv4/protocol.c
+++ b/net/ipv4/protocol.c
@@ -28,14 +28,14 @@
 #include <linux/spinlock.h>
 #include <net/protocol.h>
 
-struct net_protocol *inet_protos[MAX_INET_PROTOS] ____cacheline_aligned_in_smp;
+const struct net_protocol *inet_protos[MAX_INET_PROTOS] ____cacheline_aligned_in_smp;
 static DEFINE_SPINLOCK(inet_proto_lock);
 
 /*
  *	Add a protocol handler to the hash tables
  */
 
-int inet_add_protocol(struct net_protocol *prot, unsigned char protocol)
+int inet_add_protocol(const struct net_protocol *prot, unsigned char protocol)
 {
 	int hash, ret;
 
@@ -57,7 +57,7 @@ int inet_add_protocol(struct net_protocol *prot, unsigned char protocol)
  *	Remove a protocol from the hash tables.
  */
 
-int inet_del_protocol(struct net_protocol *prot, unsigned char protocol)
+int inet_del_protocol(const struct net_protocol *prot, unsigned char protocol)
 {
 	int hash, ret;
 
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index edeea060db44..19a0612b8a20 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2012,7 +2012,7 @@ int tcp_disconnect(struct sock *sk, int flags)
 	tp->snd_cwnd = 2;
 	icsk->icsk_probes_out = 0;
 	tp->packets_out = 0;
-	tp->snd_ssthresh = 0x7fffffff;
+	tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
 	tp->snd_cwnd_cnt = 0;
 	tp->bytes_acked = 0;
 	tcp_set_ca_state(sk, TCP_CA_Open);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index af6d6fa00db1..d86784be7ab3 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -761,7 +761,7 @@ void tcp_update_metrics(struct sock *sk)
 			set_dst_metric_rtt(dst, RTAX_RTTVAR, var);
 		}
 
-		if (tp->snd_ssthresh >= 0xFFFF) {
+		if (tcp_in_initial_slowstart(tp)) {
 			/* Slow start still did not finish. */
 			if (dst_metric(dst, RTAX_SSTHRESH) &&
 			    !dst_metric_locked(dst, RTAX_SSTHRESH) &&
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 0543561da999..7cda24b53f61 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1808,7 +1808,7 @@ static int tcp_v4_init_sock(struct sock *sk)
 	/* See draft-stevens-tcpca-spec-01 for discussion of the
 	 * initialization of these values.
 	 */
-	tp->snd_ssthresh = 0x7fffffff;	/* Infinity */
+	tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
 	tp->snd_cwnd_clamp = ~0;
 	tp->mss_cache = 536;
 
@@ -2284,7 +2284,7 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len)
 		jiffies_to_clock_t(icsk->icsk_ack.ato),
 		(icsk->icsk_ack.quick << 1) | icsk->icsk_ack.pingpong,
 		tp->snd_cwnd,
-		tp->snd_ssthresh >= 0xFFFF ? -1 : tp->snd_ssthresh,
+		tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh,
 		len);
 }
 
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index e48c37d74d77..624c3c9b3c2b 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -363,7 +363,7 @@ void tcp_twsk_destructor(struct sock *sk)
 #ifdef CONFIG_TCP_MD5SIG
 	struct tcp_timewait_sock *twsk = tcp_twsk(sk);
 	if (twsk->tw_md5_keylen)
-		tcp_put_md5sig_pool();
+		tcp_free_md5sig_pool();
 #endif
 }
 
@@ -410,7 +410,7 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req,
 		newtp->retrans_out = 0;
 		newtp->sacked_out = 0;
 		newtp->fackets_out = 0;
-		newtp->snd_ssthresh = 0x7fffffff;
+		newtp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
 
 		/* So many TCP implementations out there (incorrectly) count the
 		 * initial SYN frame in their delayed-ACK and congestion control
diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c
index cb1f0e83830b..3959e0ca456a 100644
--- a/net/ipv4/tunnel4.c
+++ b/net/ipv4/tunnel4.c
@@ -132,7 +132,7 @@ static void tunnel64_err(struct sk_buff *skb, u32 info)
 }
 #endif
 
-static struct net_protocol tunnel4_protocol = {
+static const struct net_protocol tunnel4_protocol = {
 	.handler	=	tunnel4_rcv,
 	.err_handler	=	tunnel4_err,
 	.no_policy	=	1,
@@ -140,7 +140,7 @@ static struct net_protocol tunnel4_protocol = {
 };
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-static struct net_protocol tunnel64_protocol = {
+static const struct net_protocol tunnel64_protocol = {
 	.handler	=	tunnel64_rcv,
 	.err_handler	=	tunnel64_err,
 	.no_policy	=	1,
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index c784891cb7e5..95248d7f75ec 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -25,7 +25,7 @@ static void udplite_err(struct sk_buff *skb, u32 info)
 	__udp4_lib_err(skb, info, &udplite_table);
 }
 
-static	struct net_protocol udplite_protocol = {
+static const struct net_protocol udplite_protocol = {
 	.handler	= udplite_rcv,
 	.err_handler	= udplite_err,
 	.no_policy	= 1,
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index c9b369034a40..55f486d89c88 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -137,6 +137,8 @@ static DEFINE_SPINLOCK(addrconf_verify_lock);
 static void addrconf_join_anycast(struct inet6_ifaddr *ifp);
 static void addrconf_leave_anycast(struct inet6_ifaddr *ifp);
 
+static void addrconf_bonding_change(struct net_device *dev,
+				    unsigned long event);
 static int addrconf_ifdown(struct net_device *dev, int how);
 
 static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags);
@@ -1405,8 +1407,8 @@ void addrconf_dad_failure(struct inet6_ifaddr *ifp)
 	struct inet6_dev *idev = ifp->idev;
 
 	if (net_ratelimit())
-		printk(KERN_INFO "%s: IPv6 duplicate address detected!\n",
-			ifp->idev->dev->name);
+		printk(KERN_INFO "%s: IPv6 duplicate address %pI6c detected!\n",
+			ifp->idev->dev->name, &ifp->addr);
 
 	if (idev->cnf.accept_dad > 1 && !idev->cnf.disable_ipv6) {
 		struct in6_addr addr;
@@ -2582,6 +2584,10 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event,
 				return notifier_from_errno(err);
 		}
 		break;
+	case NETDEV_BONDING_OLDTYPE:
+	case NETDEV_BONDING_NEWTYPE:
+		addrconf_bonding_change(dev, event);
+		break;
 	}
 
 	return NOTIFY_OK;
@@ -2595,6 +2601,19 @@ static struct notifier_block ipv6_dev_notf = {
 	.priority = 0
 };
 
+static void addrconf_bonding_change(struct net_device *dev, unsigned long event)
+{
+	struct inet6_dev *idev;
+	ASSERT_RTNL();
+
+	idev = __in6_dev_get(dev);
+
+	if (event == NETDEV_BONDING_NEWTYPE)
+		ipv6_mc_remap(idev);
+	else if (event == NETDEV_BONDING_OLDTYPE)
+		ipv6_mc_unmap(idev);
+}
+
 static int addrconf_ifdown(struct net_device *dev, int how)
 {
 	struct inet6_dev *idev;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index a123a328aeb3..e127a32f9540 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -710,7 +710,7 @@ EXPORT_SYMBOL_GPL(ipv6_opt_accepted);
 
 static int ipv6_gso_pull_exthdrs(struct sk_buff *skb, int proto)
 {
-	struct inet6_protocol *ops = NULL;
+	const struct inet6_protocol *ops = NULL;
 
 	for (;;) {
 		struct ipv6_opt_hdr *opth;
@@ -745,7 +745,7 @@ static int ipv6_gso_pull_exthdrs(struct sk_buff *skb, int proto)
 static int ipv6_gso_send_check(struct sk_buff *skb)
 {
 	struct ipv6hdr *ipv6h;
-	struct inet6_protocol *ops;
+	const struct inet6_protocol *ops;
 	int err = -EINVAL;
 
 	if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
@@ -773,7 +773,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, int features)
 {
 	struct sk_buff *segs = ERR_PTR(-EINVAL);
 	struct ipv6hdr *ipv6h;
-	struct inet6_protocol *ops;
+	const struct inet6_protocol *ops;
 	int proto;
 	struct frag_hdr *fptr;
 	unsigned int unfrag_ip6hlen;
@@ -840,7 +840,7 @@ struct ipv6_gro_cb {
 static struct sk_buff **ipv6_gro_receive(struct sk_buff **head,
 					 struct sk_buff *skb)
 {
-	struct inet6_protocol *ops;
+	const struct inet6_protocol *ops;
 	struct sk_buff **pp = NULL;
 	struct sk_buff *p;
 	struct ipv6hdr *iph;
@@ -926,7 +926,7 @@ out:
 
 static int ipv6_gro_complete(struct sk_buff *skb)
 {
-	struct inet6_protocol *ops;
+	const struct inet6_protocol *ops;
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 	int err = -ENOSYS;
 
diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c
index 86f42a288c4b..c1589e2f1dc9 100644
--- a/net/ipv6/ah6.c
+++ b/net/ipv6/ah6.c
@@ -527,7 +527,7 @@ static const struct xfrm_type ah6_type =
 	.hdr_offset	= xfrm6_find_1stfragopt,
 };
 
-static struct inet6_protocol ah6_protocol = {
+static const struct inet6_protocol ah6_protocol = {
 	.handler	=	xfrm6_rcv,
 	.err_handler	=	ah6_err,
 	.flags		=	INET6_PROTO_NOPOLICY,
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 678bb95b1525..af597c73ebe9 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -558,7 +558,7 @@ static const struct xfrm_type esp6_type =
 	.hdr_offset	= xfrm6_find_1stfragopt,
 };
 
-static struct inet6_protocol esp6_protocol = {
+static const struct inet6_protocol esp6_protocol = {
 	.handler 	=	xfrm6_rcv,
 	.err_handler	=	esp6_err,
 	.flags		=	INET6_PROTO_NOPOLICY,
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 4aae658e5501..df159fffe4bc 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -500,17 +500,17 @@ unknown_rh:
 	return -1;
 }
 
-static struct inet6_protocol rthdr_protocol = {
+static const struct inet6_protocol rthdr_protocol = {
 	.handler	=	ipv6_rthdr_rcv,
 	.flags		=	INET6_PROTO_NOPOLICY | INET6_PROTO_GSO_EXTHDR,
 };
 
-static struct inet6_protocol destopt_protocol = {
+static const struct inet6_protocol destopt_protocol = {
 	.handler	=	ipv6_destopt_rcv,
 	.flags		=	INET6_PROTO_NOPOLICY | INET6_PROTO_GSO_EXTHDR,
 };
 
-static struct inet6_protocol nodata_protocol = {
+static const struct inet6_protocol nodata_protocol = {
 	.handler	=	dst_discard,
 	.flags		=	INET6_PROTO_NOPOLICY,
 };
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index e2325f6a05fb..f23ebbec0631 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -86,7 +86,7 @@ static inline struct sock *icmpv6_sk(struct net *net)
 
 static int icmpv6_rcv(struct sk_buff *skb);
 
-static struct inet6_protocol icmpv6_protocol = {
+static const struct inet6_protocol icmpv6_protocol = {
 	.handler	=	icmpv6_rcv,
 	.flags		=	INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
 };
@@ -583,7 +583,7 @@ out:
 
 static void icmpv6_notify(struct sk_buff *skb, u8 type, u8 code, __be32 info)
 {
-	struct inet6_protocol *ipprot;
+	const struct inet6_protocol *ipprot;
 	int inner_offset;
 	int hash;
 	u8 nexthdr;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 2d9cbaa67edb..237e2dba6e94 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -159,7 +159,7 @@ drop:
 
 static int ip6_input_finish(struct sk_buff *skb)
 {
-	struct inet6_protocol *ipprot;
+	const struct inet6_protocol *ipprot;
 	unsigned int nhoff;
 	int nexthdr, raw;
 	u8 hash;
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 5c8d73730c75..3907510c2ce3 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -83,10 +83,6 @@ static int ip6mr_cache_report(struct net *net, struct sk_buff *pkt,
 static int ip6mr_fill_mroute(struct sk_buff *skb, struct mfc6_cache *c, struct rtmsg *rtm);
 static void mroute_clean_tables(struct net *net);
 
-#ifdef CONFIG_IPV6_PIMSM_V2
-static struct inet6_protocol pim6_protocol;
-#endif
-
 static struct timer_list ipmr_expire_timer;
 
 
@@ -410,7 +406,7 @@ static int pim6_rcv(struct sk_buff *skb)
 	return 0;
 }
 
-static struct inet6_protocol pim6_protocol = {
+static const struct inet6_protocol pim6_protocol = {
 	.handler	=	pim6_rcv,
 };
 
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 79c172f1ff01..2f2a5ca2c878 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -178,7 +178,7 @@ static const struct xfrm_type ipcomp6_type =
 	.hdr_offset	= xfrm6_find_1stfragopt,
 };
 
-static struct inet6_protocol ipcomp6_protocol =
+static const struct inet6_protocol ipcomp6_protocol =
 {
 	.handler	= xfrm6_rcv,
 	.err_handler	= ipcomp6_err,
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 71c3dacec1ed..f9fcf690bd5d 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -2249,6 +2249,25 @@ static void igmp6_timer_handler(unsigned long data)
 	ma_put(ma);
 }
 
+/* Device changing type */
+
+void ipv6_mc_unmap(struct inet6_dev *idev)
+{
+	struct ifmcaddr6 *i;
+
+	/* Install multicast list, except for all-nodes (already installed) */
+
+	read_lock_bh(&idev->lock);
+	for (i = idev->mc_list; i; i = i->next)
+		igmp6_group_dropped(i);
+	read_unlock_bh(&idev->lock);
+}
+
+void ipv6_mc_remap(struct inet6_dev *idev)
+{
+	ipv6_mc_up(idev);
+}
+
 /* Device going down */
 
 void ipv6_mc_down(struct inet6_dev *idev)
diff --git a/net/ipv6/protocol.c b/net/ipv6/protocol.c
index 568864f722ca..1fa3468f0f32 100644
--- a/net/ipv6/protocol.c
+++ b/net/ipv6/protocol.c
@@ -25,11 +25,11 @@
 #include <linux/spinlock.h>
 #include <net/protocol.h>
 
-struct inet6_protocol *inet6_protos[MAX_INET_PROTOS];
+const struct inet6_protocol *inet6_protos[MAX_INET_PROTOS];
 static DEFINE_SPINLOCK(inet6_proto_lock);
 
 
-int inet6_add_protocol(struct inet6_protocol *prot, unsigned char protocol)
+int inet6_add_protocol(const struct inet6_protocol *prot, unsigned char protocol)
 {
 	int ret, hash = protocol & (MAX_INET_PROTOS - 1);
 
@@ -53,7 +53,7 @@ EXPORT_SYMBOL(inet6_add_protocol);
  *	Remove a protocol from the hash tables.
  */
 
-int inet6_del_protocol(struct inet6_protocol *prot, unsigned char protocol)
+int inet6_del_protocol(const struct inet6_protocol *prot, unsigned char protocol)
 {
 	int ret, hash = protocol & (MAX_INET_PROTOS - 1);
 
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 2642a41a8535..da5bd0ed83df 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -627,7 +627,7 @@ fail_hdr:
 	return -1;
 }
 
-static struct inet6_protocol frag_protocol =
+static const struct inet6_protocol frag_protocol =
 {
 	.handler	=	ipv6_frag_rcv,
 	.flags		=	INET6_PROTO_NOPOLICY,
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 9ccfef345560..77aecbe8ff6c 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -481,7 +481,7 @@ int rt6_route_rcv(struct net_device *dev, u8 *opt, int len,
 
 	pref = rinfo->route_pref;
 	if (pref == ICMPV6_ROUTER_PREF_INVALID)
-		pref = ICMPV6_ROUTER_PREF_MEDIUM;
+		return -EINVAL;
 
 	lifetime = addrconf_timeout_fixup(ntohl(rinfo->lifetime), HZ);
 
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 3aae0f217d61..21d100b68b19 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1846,7 +1846,7 @@ static int tcp_v6_init_sock(struct sock *sk)
 	/* See draft-stevens-tcpca-spec-01 for discussion of the
 	 * initialization of these values.
 	 */
-	tp->snd_ssthresh = 0x7fffffff;
+	tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
 	tp->snd_cwnd_clamp = ~0;
 	tp->mss_cache = 536;
 
@@ -1969,7 +1969,8 @@ static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i)
 		   jiffies_to_clock_t(icsk->icsk_rto),
 		   jiffies_to_clock_t(icsk->icsk_ack.ato),
 		   (icsk->icsk_ack.quick << 1 ) | icsk->icsk_ack.pingpong,
-		   tp->snd_cwnd, tp->snd_ssthresh>=0xFFFF?-1:tp->snd_ssthresh
+		   tp->snd_cwnd,
+		   tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh
 		   );
 }
 
@@ -2093,7 +2094,7 @@ struct proto tcpv6_prot = {
 #endif
 };
 
-static struct inet6_protocol tcpv6_protocol = {
+static const struct inet6_protocol tcpv6_protocol = {
 	.handler	=	tcp_v6_rcv,
 	.err_handler	=	tcp_v6_err,
 	.gso_send_check	=	tcp_v6_gso_send_check,
diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c
index 633ad789effc..51e2832d13a6 100644
--- a/net/ipv6/tunnel6.c
+++ b/net/ipv6/tunnel6.c
@@ -133,13 +133,13 @@ static void tunnel6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 			break;
 }
 
-static struct inet6_protocol tunnel6_protocol = {
+static const struct inet6_protocol tunnel6_protocol = {
 	.handler	= tunnel6_rcv,
 	.err_handler	= tunnel6_err,
 	.flags          = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
 };
 
-static struct inet6_protocol tunnel46_protocol = {
+static const struct inet6_protocol tunnel46_protocol = {
 	.handler	= tunnel46_rcv,
 	.err_handler	= tunnel6_err,
 	.flags          = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 164040613c2e..b265b7047d3e 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1172,7 +1172,7 @@ out:
 	return segs;
 }
 
-static struct inet6_protocol udpv6_protocol = {
+static const struct inet6_protocol udpv6_protocol = {
 	.handler	=	udpv6_rcv,
 	.err_handler	=	udpv6_err,
 	.gso_send_check =	udp6_ufo_send_check,
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index 4818c48688f2..d737a27ee010 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -25,7 +25,7 @@ static void udplitev6_err(struct sk_buff *skb,
 	__udp6_lib_err(skb, opt, type, code, offset, info, &udplite_table);
 }
 
-static struct inet6_protocol udplitev6_protocol = {
+static const struct inet6_protocol udplitev6_protocol = {
 	.handler	=	udplitev6_rcv,
 	.err_handler	=	udplitev6_err,
 	.flags		=	INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 49c15b48408e..d985d163dcfc 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -34,7 +34,7 @@
 
 static char iucv_userid[80];
 
-static struct proto_ops iucv_sock_ops;
+static const struct proto_ops iucv_sock_ops;
 
 static struct proto iucv_proto = {
 	.name		= "AF_IUCV",
@@ -59,8 +59,8 @@ do {									\
 	DEFINE_WAIT(__wait);						\
 	long __timeo = timeo;						\
 	ret = 0;							\
+	prepare_to_wait(sk->sk_sleep, &__wait, TASK_INTERRUPTIBLE);	\
 	while (!(condition)) {						\
-		prepare_to_wait(sk->sk_sleep, &__wait, TASK_INTERRUPTIBLE); \
 		if (!__timeo) {						\
 			ret = -EAGAIN;					\
 			break;						\
@@ -361,10 +361,9 @@ static void iucv_sock_cleanup_listen(struct sock *parent)
 	}
 
 	parent->sk_state = IUCV_CLOSED;
-	sock_set_flag(parent, SOCK_ZAPPED);
 }
 
-/* Kill socket */
+/* Kill socket (only if zapped and orphaned) */
 static void iucv_sock_kill(struct sock *sk)
 {
 	if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket)
@@ -426,17 +425,18 @@ static void iucv_sock_close(struct sock *sk)
 
 		skb_queue_purge(&iucv->send_skb_q);
 		skb_queue_purge(&iucv->backlog_skb_q);
-
-		sock_set_flag(sk, SOCK_ZAPPED);
 		break;
 
 	default:
 		sock_set_flag(sk, SOCK_ZAPPED);
+		/* nothing to do here */
 		break;
 	}
 
+	/* mark socket for deletion by iucv_sock_kill() */
+	sock_set_flag(sk, SOCK_ZAPPED);
+
 	release_sock(sk);
-	iucv_sock_kill(sk);
 }
 
 static void iucv_sock_init(struct sock *sk, struct sock *parent)
@@ -569,6 +569,7 @@ struct sock *iucv_accept_dequeue(struct sock *parent, struct socket *newsock)
 
 		if (sk->sk_state == IUCV_CONNECTED ||
 		    sk->sk_state == IUCV_SEVERED ||
+		    sk->sk_state == IUCV_DISCONN ||	/* due to PM restore */
 		    !newsock) {
 			iucv_accept_unlink(sk);
 			if (newsock)
@@ -1035,6 +1036,10 @@ out:
 	return err;
 }
 
+/* iucv_fragment_skb() - Fragment a single IUCV message into multiple skb's
+ *
+ * Locking: must be called with message_q.lock held
+ */
 static int iucv_fragment_skb(struct sock *sk, struct sk_buff *skb, int len)
 {
 	int dataleft, size, copied = 0;
@@ -1069,6 +1074,10 @@ static int iucv_fragment_skb(struct sock *sk, struct sk_buff *skb, int len)
 	return 0;
 }
 
+/* iucv_process_message() - Receive a single outstanding IUCV message
+ *
+ * Locking: must be called with message_q.lock held
+ */
 static void iucv_process_message(struct sock *sk, struct sk_buff *skb,
 				 struct iucv_path *path,
 				 struct iucv_message *msg)
@@ -1119,6 +1128,10 @@ static void iucv_process_message(struct sock *sk, struct sk_buff *skb,
 		skb_queue_head(&iucv_sk(sk)->backlog_skb_q, skb);
 }
 
+/* iucv_process_message_q() - Process outstanding IUCV messages
+ *
+ * Locking: must be called with message_q.lock held
+ */
 static void iucv_process_message_q(struct sock *sk)
 {
 	struct iucv_sock *iucv = iucv_sk(sk);
@@ -1209,6 +1222,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 		kfree_skb(skb);
 
 		/* Queue backlog skbs */
+		spin_lock_bh(&iucv->message_q.lock);
 		rskb = skb_dequeue(&iucv->backlog_skb_q);
 		while (rskb) {
 			if (sock_queue_rcv_skb(sk, rskb)) {
@@ -1220,11 +1234,10 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 			}
 		}
 		if (skb_queue_empty(&iucv->backlog_skb_q)) {
-			spin_lock_bh(&iucv->message_q.lock);
 			if (!list_empty(&iucv->message_q.list))
 				iucv_process_message_q(sk);
-			spin_unlock_bh(&iucv->message_q.lock);
 		}
+		spin_unlock_bh(&iucv->message_q.lock);
 	}
 
 done:
@@ -1682,7 +1695,7 @@ static void iucv_callback_shutdown(struct iucv_path *path, u8 ipuser[16])
 	bh_unlock_sock(sk);
 }
 
-static struct proto_ops iucv_sock_ops = {
+static const struct proto_ops iucv_sock_ops = {
 	.family		= PF_IUCV,
 	.owner		= THIS_MODULE,
 	.release	= iucv_sock_release,
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index c833481d32e3..3973d0e61e56 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -79,6 +79,14 @@ static int iucv_bus_match(struct device *dev, struct device_driver *drv)
 	return 0;
 }
 
+enum iucv_pm_states {
+	IUCV_PM_INITIAL = 0,
+	IUCV_PM_FREEZING = 1,
+	IUCV_PM_THAWING = 2,
+	IUCV_PM_RESTORING = 3,
+};
+static enum iucv_pm_states iucv_pm_state;
+
 static int iucv_pm_prepare(struct device *);
 static void iucv_pm_complete(struct device *);
 static int iucv_pm_freeze(struct device *);
@@ -354,7 +362,7 @@ static int iucv_query_maxconn(void)
 		"	srl	%0,28\n"
 		: "=d" (ccode), "+d" (reg0), "+d" (reg1) : : "cc");
 	if (ccode == 0)
-		iucv_max_pathid = reg0;
+		iucv_max_pathid = reg1;
 	kfree(param);
 	return ccode ? -EPERM : 0;
 }
@@ -856,7 +864,7 @@ int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
 	int rc;
 
 	local_bh_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -905,7 +913,7 @@ int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
 
 	spin_lock_bh(&iucv_table_lock);
 	iucv_cleanup_queue();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -965,7 +973,7 @@ int iucv_path_quiesce(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -997,7 +1005,7 @@ int iucv_path_resume(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1026,7 +1034,7 @@ int iucv_path_sever(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	preempt_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1060,7 +1068,7 @@ int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1152,7 +1160,7 @@ int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
 	if (msg->flags & IUCV_IPRMDATA)
 		return iucv_message_receive_iprmdata(path, msg, flags,
 						     buffer, size, residual);
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1225,7 +1233,7 @@ int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg)
 	int rc;
 
 	local_bh_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1264,7 +1272,7 @@ int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1314,7 +1322,7 @@ int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
 	union iucv_param *parm;
 	int rc;
 
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1401,7 +1409,7 @@ int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
-	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+	if (cpus_empty(iucv_buffer_cpumask)) {
 		rc = -EIO;
 		goto out;
 	}
@@ -1875,6 +1883,7 @@ static int iucv_pm_freeze(struct device *dev)
 #ifdef CONFIG_PM_DEBUG
 	printk(KERN_WARNING "iucv_pm_freeze\n");
 #endif
+	iucv_pm_state = IUCV_PM_FREEZING;
 	for_each_cpu_mask_nr(cpu, iucv_irq_cpumask)
 		smp_call_function_single(cpu, iucv_block_cpu_almost, NULL, 1);
 	if (dev->driver && dev->driver->pm && dev->driver->pm->freeze)
@@ -1899,6 +1908,7 @@ static int iucv_pm_thaw(struct device *dev)
 #ifdef CONFIG_PM_DEBUG
 	printk(KERN_WARNING "iucv_pm_thaw\n");
 #endif
+	iucv_pm_state = IUCV_PM_THAWING;
 	if (!iucv_path_table) {
 		rc = iucv_enable();
 		if (rc)
@@ -1933,6 +1943,10 @@ static int iucv_pm_restore(struct device *dev)
 #ifdef CONFIG_PM_DEBUG
 	printk(KERN_WARNING "iucv_pm_restore %p\n", iucv_path_table);
 #endif
+	if ((iucv_pm_state != IUCV_PM_RESTORING) && iucv_path_table)
+		pr_warning("Suspending Linux did not completely close all IUCV "
+			"connections\n");
+	iucv_pm_state = IUCV_PM_RESTORING;
 	if (cpus_empty(iucv_irq_cpumask)) {
 		rc = iucv_query_maxconn();
 		rc = iucv_enable();
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 7c5142988bbb..6e5d68b4e427 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -418,7 +418,7 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
 
 			/* contention window */
 			tx_time_single += t_slot + min(cw, mp->cw_max);
-			cw = (cw + 1) << 1;
+			cw = (cw << 1) | 1;
 
 			tx_time += tx_time_single;
 			tx_time_cts += tx_time_single + mi->sp_ack_dur;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index d0ff382c40ca..c5aab6a368ce 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -177,9 +177,11 @@ static void netlink_sock_destruct(struct sock *sk)
  * this, _but_ remember, it adds useless work on UP machines.
  */
 
-static void netlink_table_grab(void)
+void netlink_table_grab(void)
 	__acquires(nl_table_lock)
 {
+	might_sleep();
+
 	write_lock_irq(&nl_table_lock);
 
 	if (atomic_read(&nl_table_users)) {
@@ -200,7 +202,7 @@ static void netlink_table_grab(void)
 	}
 }
 
-static void netlink_table_ungrab(void)
+void netlink_table_ungrab(void)
 	__releases(nl_table_lock)
 {
 	write_unlock_irq(&nl_table_lock);
@@ -1549,37 +1551,21 @@ static void netlink_free_old_listeners(struct rcu_head *rcu_head)
 	kfree(lrh->ptr);
 }
 
-/**
- * netlink_change_ngroups - change number of multicast groups
- *
- * This changes the number of multicast groups that are available
- * on a certain netlink family. Note that it is not possible to
- * change the number of groups to below 32. Also note that it does
- * not implicitly call netlink_clear_multicast_users() when the
- * number of groups is reduced.
- *
- * @sk: The kernel netlink socket, as returned by netlink_kernel_create().
- * @groups: The new number of groups.
- */
-int netlink_change_ngroups(struct sock *sk, unsigned int groups)
+int __netlink_change_ngroups(struct sock *sk, unsigned int groups)
 {
 	unsigned long *listeners, *old = NULL;
 	struct listeners_rcu_head *old_rcu_head;
 	struct netlink_table *tbl = &nl_table[sk->sk_protocol];
-	int err = 0;
 
 	if (groups < 32)
 		groups = 32;
 
-	netlink_table_grab();
 	if (NLGRPSZ(tbl->groups) < NLGRPSZ(groups)) {
 		listeners = kzalloc(NLGRPSZ(groups) +
 				    sizeof(struct listeners_rcu_head),
 				    GFP_ATOMIC);
-		if (!listeners) {
-			err = -ENOMEM;
-			goto out_ungrab;
-		}
+		if (!listeners)
+			return -ENOMEM;
 		old = tbl->listeners;
 		memcpy(listeners, old, NLGRPSZ(tbl->groups));
 		rcu_assign_pointer(tbl->listeners, listeners);
@@ -1597,8 +1583,29 @@ int netlink_change_ngroups(struct sock *sk, unsigned int groups)
 	}
 	tbl->groups = groups;
 
- out_ungrab:
+	return 0;
+}
+
+/**
+ * netlink_change_ngroups - change number of multicast groups
+ *
+ * This changes the number of multicast groups that are available
+ * on a certain netlink family. Note that it is not possible to
+ * change the number of groups to below 32. Also note that it does
+ * not implicitly call netlink_clear_multicast_users() when the
+ * number of groups is reduced.
+ *
+ * @sk: The kernel netlink socket, as returned by netlink_kernel_create().
+ * @groups: The new number of groups.
+ */
+int netlink_change_ngroups(struct sock *sk, unsigned int groups)
+{
+	int err;
+
+	netlink_table_grab();
+	err = __netlink_change_ngroups(sk, groups);
 	netlink_table_ungrab();
+
 	return err;
 }
 
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index 66f6ba0bab11..566941e03363 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -176,9 +176,10 @@ int genl_register_mc_group(struct genl_family *family,
 	if (family->netnsok) {
 		struct net *net;
 
+		netlink_table_grab();
 		rcu_read_lock();
 		for_each_net_rcu(net) {
-			err = netlink_change_ngroups(net->genl_sock,
+			err = __netlink_change_ngroups(net->genl_sock,
 					mc_groups_longs * BITS_PER_LONG);
 			if (err) {
 				/*
@@ -188,10 +189,12 @@ int genl_register_mc_group(struct genl_family *family,
 				 * increased on some sockets which is ok.
 				 */
 				rcu_read_unlock();
+				netlink_table_ungrab();
 				goto out;
 			}
 		}
 		rcu_read_unlock();
+		netlink_table_ungrab();
 	} else {
 		err = netlink_change_ngroups(init_net.genl_sock,
 					     mc_groups_longs * BITS_PER_LONG);
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 2f65dcaed2fb..5f42f30dd168 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -209,7 +209,14 @@ static int phonet_device_autoconf(struct net_device *dev)
 						SIOCPNGAUTOCONF);
 	if (ret < 0)
 		return ret;
-	return phonet_address_add(dev, req.ifr_phonet_autoconf.device);
+
+	ASSERT_RTNL();
+	ret = phonet_address_add(dev, req.ifr_phonet_autoconf.device);
+	if (ret)
+		return ret;
+	phonet_address_notify(RTM_NEWADDR, dev,
+				req.ifr_phonet_autoconf.device);
+	return 0;
 }
 
 /* notify Phonet of device events */
diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c
index 108ed2e671c5..6b58aeff4c7a 100644
--- a/net/rds/af_rds.c
+++ b/net/rds/af_rds.c
@@ -359,7 +359,7 @@ static struct proto rds_proto = {
 	.obj_size = sizeof(struct rds_sock),
 };
 
-static struct proto_ops rds_proto_ops = {
+static const struct proto_ops rds_proto_ops = {
 	.family =	AF_RDS,
 	.owner =	THIS_MODULE,
 	.release =	rds_release,
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index e5f478ca3d61..1e166c9685aa 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -63,7 +63,7 @@ int sysctl_rose_window_size             = ROSE_DEFAULT_WINDOW_SIZE;
 static HLIST_HEAD(rose_list);
 static DEFINE_SPINLOCK(rose_list_lock);
 
-static struct proto_ops rose_proto_ops;
+static const struct proto_ops rose_proto_ops;
 
 ax25_address rose_callsign;
 
@@ -1515,7 +1515,7 @@ static struct net_proto_family rose_family_ops = {
 	.owner		=	THIS_MODULE,
 };
 
-static struct proto_ops rose_proto_ops = {
+static const struct proto_ops rose_proto_ops = {
 	.family		=	PF_ROSE,
 	.owner		=	THIS_MODULE,
 	.release	=	rose_release,
diff --git a/net/rxrpc/ar-ack.c b/net/rxrpc/ar-ack.c
index c9f1f0a3a2ff..b4a220977031 100644
--- a/net/rxrpc/ar-ack.c
+++ b/net/rxrpc/ar-ack.c
@@ -40,7 +40,7 @@ static const s8 rxrpc_ack_priority[] = {
 /*
  * propose an ACK be sent
  */
-void __rxrpc_propose_ACK(struct rxrpc_call *call, uint8_t ack_reason,
+void __rxrpc_propose_ACK(struct rxrpc_call *call, u8 ack_reason,
 			 __be32 serial, bool immediate)
 {
 	unsigned long expiry;
@@ -120,7 +120,7 @@ cancel_timer:
 /*
  * propose an ACK be sent, locking the call structure
  */
-void rxrpc_propose_ACK(struct rxrpc_call *call, uint8_t ack_reason,
+void rxrpc_propose_ACK(struct rxrpc_call *call, u8 ack_reason,
 		       __be32 serial, bool immediate)
 {
 	s8 prior = rxrpc_ack_priority[ack_reason];
@@ -520,7 +520,7 @@ static void rxrpc_zap_tx_window(struct rxrpc_call *call)
 	struct rxrpc_skb_priv *sp;
 	struct sk_buff *skb;
 	unsigned long _skb, *acks_window;
-	uint8_t winsz = call->acks_winsz;
+	u8 winsz = call->acks_winsz;
 	int tail;
 
 	acks_window = call->acks_window;
diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h
index 3e7318c1343c..7043b294bb67 100644
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -229,7 +229,7 @@ struct rxrpc_conn_bundle {
 	int			debug_id;	/* debug ID for printks */
 	unsigned short		num_conns;	/* number of connections in this bundle */
 	__be16			service_id;	/* service ID */
-	uint8_t			security_ix;	/* security type */
+	u8			security_ix;	/* security type */
 };
 
 /*
@@ -370,10 +370,10 @@ struct rxrpc_call {
 	u8			channel;	/* connection channel occupied by this call */
 
 	/* transmission-phase ACK management */
-	uint8_t			acks_head;	/* offset into window of first entry */
-	uint8_t			acks_tail;	/* offset into window of last entry */
-	uint8_t			acks_winsz;	/* size of un-ACK'd window */
-	uint8_t			acks_unacked;	/* lowest unacked packet in last ACK received */
+	u8			acks_head;	/* offset into window of first entry */
+	u8			acks_tail;	/* offset into window of last entry */
+	u8			acks_winsz;	/* size of un-ACK'd window */
+	u8			acks_unacked;	/* lowest unacked packet in last ACK received */
 	int			acks_latest;	/* serial number of latest ACK received */
 	rxrpc_seq_t		acks_hard;	/* highest definitively ACK'd msg seq */
 	unsigned long		*acks_window;	/* sent packet window
@@ -388,7 +388,7 @@ struct rxrpc_call {
 	rxrpc_seq_t		rx_first_oos;	/* first packet in rx_oos_queue (or 0) */
 	rxrpc_seq_t		ackr_win_top;	/* top of ACK window (rx_data_eaten is bottom) */
 	rxrpc_seq_net_t		ackr_prev_seq;	/* previous sequence number received */
-	uint8_t			ackr_reason;	/* reason to ACK */
+	u8			ackr_reason;	/* reason to ACK */
 	__be32			ackr_serial;	/* serial of packet being ACK'd */
 	atomic_t		ackr_not_idle;	/* number of packets in Rx queue */
 
@@ -402,22 +402,6 @@ struct rxrpc_call {
 };
 
 /*
- * RxRPC key for Kerberos (type-2 security)
- */
-struct rxkad_key {
-	u16	security_index;		/* RxRPC header security index */
-	u16	ticket_len;		/* length of ticket[] */
-	u32	expiry;			/* time at which expires */
-	u32	kvno;			/* key version number */
-	u8	session_key[8];		/* DES session key */
-	u8	ticket[0];		/* the encrypted ticket */
-};
-
-struct rxrpc_key_payload {
-	struct rxkad_key k;
-};
-
-/*
  * locally abort an RxRPC call
  */
 static inline void rxrpc_abort_call(struct rxrpc_call *call, u32 abort_code)
@@ -450,8 +434,8 @@ extern int rxrpc_reject_call(struct rxrpc_sock *);
 /*
  * ar-ack.c
  */
-extern void __rxrpc_propose_ACK(struct rxrpc_call *, uint8_t, __be32, bool);
-extern void rxrpc_propose_ACK(struct rxrpc_call *, uint8_t, __be32, bool);
+extern void __rxrpc_propose_ACK(struct rxrpc_call *, u8, __be32, bool);
+extern void rxrpc_propose_ACK(struct rxrpc_call *, u8, __be32, bool);
 extern void rxrpc_process_call(struct work_struct *);
 
 /*
diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c
index ad8c7a782da1..74697b200496 100644
--- a/net/rxrpc/ar-key.c
+++ b/net/rxrpc/ar-key.c
@@ -17,6 +17,7 @@
 #include <linux/skbuff.h>
 #include <linux/key-type.h>
 #include <linux/crypto.h>
+#include <linux/ctype.h>
 #include <net/sock.h>
 #include <net/af_rxrpc.h>
 #include <keys/rxrpc-type.h>
@@ -28,6 +29,7 @@ static int rxrpc_instantiate_s(struct key *, const void *, size_t);
 static void rxrpc_destroy(struct key *);
 static void rxrpc_destroy_s(struct key *);
 static void rxrpc_describe(const struct key *, struct seq_file *);
+static long rxrpc_read(const struct key *, char __user *, size_t);
 
 /*
  * rxrpc defined keys take an arbitrary string as the description and an
@@ -39,6 +41,7 @@ struct key_type key_type_rxrpc = {
 	.match		= user_match,
 	.destroy	= rxrpc_destroy,
 	.describe	= rxrpc_describe,
+	.read		= rxrpc_read,
 };
 EXPORT_SYMBOL(key_type_rxrpc);
 
@@ -55,6 +58,595 @@ struct key_type key_type_rxrpc_s = {
 };
 
 /*
+ * parse an RxKAD type XDR format token
+ * - the caller guarantees we have at least 4 words
+ */
+static int rxrpc_instantiate_xdr_rxkad(struct key *key, const __be32 *xdr,
+				       unsigned toklen)
+{
+	struct rxrpc_key_token *token, **pptoken;
+	size_t plen;
+	u32 tktlen;
+	int ret;
+
+	_enter(",{%x,%x,%x,%x},%u",
+	       ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), ntohl(xdr[3]),
+	       toklen);
+
+	if (toklen <= 8 * 4)
+		return -EKEYREJECTED;
+	tktlen = ntohl(xdr[7]);
+	_debug("tktlen: %x", tktlen);
+	if (tktlen > AFSTOKEN_RK_TIX_MAX)
+		return -EKEYREJECTED;
+	if (8 * 4 + tktlen != toklen)
+		return -EKEYREJECTED;
+
+	plen = sizeof(*token) + sizeof(*token->kad) + tktlen;
+	ret = key_payload_reserve(key, key->datalen + plen);
+	if (ret < 0)
+		return ret;
+
+	plen -= sizeof(*token);
+	token = kmalloc(sizeof(*token), GFP_KERNEL);
+	if (!token)
+		return -ENOMEM;
+
+	token->kad = kmalloc(plen, GFP_KERNEL);
+	if (!token->kad) {
+		kfree(token);
+		return -ENOMEM;
+	}
+
+	token->security_index	= RXRPC_SECURITY_RXKAD;
+	token->kad->ticket_len	= tktlen;
+	token->kad->vice_id	= ntohl(xdr[0]);
+	token->kad->kvno	= ntohl(xdr[1]);
+	token->kad->start	= ntohl(xdr[4]);
+	token->kad->expiry	= ntohl(xdr[5]);
+	token->kad->primary_flag = ntohl(xdr[6]);
+	memcpy(&token->kad->session_key, &xdr[2], 8);
+	memcpy(&token->kad->ticket, &xdr[8], tktlen);
+
+	_debug("SCIX: %u", token->security_index);
+	_debug("TLEN: %u", token->kad->ticket_len);
+	_debug("EXPY: %x", token->kad->expiry);
+	_debug("KVNO: %u", token->kad->kvno);
+	_debug("PRIM: %u", token->kad->primary_flag);
+	_debug("SKEY: %02x%02x%02x%02x%02x%02x%02x%02x",
+	       token->kad->session_key[0], token->kad->session_key[1],
+	       token->kad->session_key[2], token->kad->session_key[3],
+	       token->kad->session_key[4], token->kad->session_key[5],
+	       token->kad->session_key[6], token->kad->session_key[7]);
+	if (token->kad->ticket_len >= 8)
+		_debug("TCKT: %02x%02x%02x%02x%02x%02x%02x%02x",
+		       token->kad->ticket[0], token->kad->ticket[1],
+		       token->kad->ticket[2], token->kad->ticket[3],
+		       token->kad->ticket[4], token->kad->ticket[5],
+		       token->kad->ticket[6], token->kad->ticket[7]);
+
+	/* count the number of tokens attached */
+	key->type_data.x[0]++;
+
+	/* attach the data */
+	for (pptoken = (struct rxrpc_key_token **)&key->payload.data;
+	     *pptoken;
+	     pptoken = &(*pptoken)->next)
+		continue;
+	*pptoken = token;
+	if (token->kad->expiry < key->expiry)
+		key->expiry = token->kad->expiry;
+
+	_leave(" = 0");
+	return 0;
+}
+
+static void rxrpc_free_krb5_principal(struct krb5_principal *princ)
+{
+	int loop;
+
+	if (princ->name_parts) {
+		for (loop = princ->n_name_parts - 1; loop >= 0; loop--)
+			kfree(princ->name_parts[loop]);
+		kfree(princ->name_parts);
+	}
+	kfree(princ->realm);
+}
+
+static void rxrpc_free_krb5_tagged(struct krb5_tagged_data *td)
+{
+	kfree(td->data);
+}
+
+/*
+ * free up an RxK5 token
+ */
+static void rxrpc_rxk5_free(struct rxk5_key *rxk5)
+{
+	int loop;
+
+	rxrpc_free_krb5_principal(&rxk5->client);
+	rxrpc_free_krb5_principal(&rxk5->server);
+	rxrpc_free_krb5_tagged(&rxk5->session);
+
+	if (rxk5->addresses) {
+		for (loop = rxk5->n_addresses - 1; loop >= 0; loop--)
+			rxrpc_free_krb5_tagged(&rxk5->addresses[loop]);
+		kfree(rxk5->addresses);
+	}
+	if (rxk5->authdata) {
+		for (loop = rxk5->n_authdata - 1; loop >= 0; loop--)
+			rxrpc_free_krb5_tagged(&rxk5->authdata[loop]);
+		kfree(rxk5->authdata);
+	}
+
+	kfree(rxk5->ticket);
+	kfree(rxk5->ticket2);
+	kfree(rxk5);
+}
+
+/*
+ * extract a krb5 principal
+ */
+static int rxrpc_krb5_decode_principal(struct krb5_principal *princ,
+				       const __be32 **_xdr,
+				       unsigned *_toklen)
+{
+	const __be32 *xdr = *_xdr;
+	unsigned toklen = *_toklen, n_parts, loop, tmp;
+
+	/* there must be at least one name, and at least #names+1 length
+	 * words */
+	if (toklen <= 12)
+		return -EINVAL;
+
+	_enter(",{%x,%x,%x},%u",
+	       ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), toklen);
+
+	n_parts = ntohl(*xdr++);
+	toklen -= 4;
+	if (n_parts <= 0 || n_parts > AFSTOKEN_K5_COMPONENTS_MAX)
+		return -EINVAL;
+	princ->n_name_parts = n_parts;
+
+	if (toklen <= (n_parts + 1) * 4)
+		return -EINVAL;
+
+	princ->name_parts = kcalloc(sizeof(char *), n_parts, GFP_KERNEL);
+	if (!princ->name_parts)
+		return -ENOMEM;
+
+	for (loop = 0; loop < n_parts; loop++) {
+		if (toklen < 4)
+			return -EINVAL;
+		tmp = ntohl(*xdr++);
+		toklen -= 4;
+		if (tmp <= 0 || tmp > AFSTOKEN_STRING_MAX)
+			return -EINVAL;
+		if (tmp > toklen)
+			return -EINVAL;
+		princ->name_parts[loop] = kmalloc(tmp + 1, GFP_KERNEL);
+		if (!princ->name_parts[loop])
+			return -ENOMEM;
+		memcpy(princ->name_parts[loop], xdr, tmp);
+		princ->name_parts[loop][tmp] = 0;
+		tmp = (tmp + 3) & ~3;
+		toklen -= tmp;
+		xdr += tmp >> 2;
+	}
+
+	if (toklen < 4)
+		return -EINVAL;
+	tmp = ntohl(*xdr++);
+	toklen -= 4;
+	if (tmp <= 0 || tmp > AFSTOKEN_K5_REALM_MAX)
+		return -EINVAL;
+	if (tmp > toklen)
+		return -EINVAL;
+	princ->realm = kmalloc(tmp + 1, GFP_KERNEL);
+	if (!princ->realm)
+		return -ENOMEM;
+	memcpy(princ->realm, xdr, tmp);
+	princ->realm[tmp] = 0;
+	tmp = (tmp + 3) & ~3;
+	toklen -= tmp;
+	xdr += tmp >> 2;
+
+	_debug("%s/...@%s", princ->name_parts[0], princ->realm);
+
+	*_xdr = xdr;
+	*_toklen = toklen;
+	_leave(" = 0 [toklen=%u]", toklen);
+	return 0;
+}
+
+/*
+ * extract a piece of krb5 tagged data
+ */
+static int rxrpc_krb5_decode_tagged_data(struct krb5_tagged_data *td,
+					 size_t max_data_size,
+					 const __be32 **_xdr,
+					 unsigned *_toklen)
+{
+	const __be32 *xdr = *_xdr;
+	unsigned toklen = *_toklen, len;
+
+	/* there must be at least one tag and one length word */
+	if (toklen <= 8)
+		return -EINVAL;
+
+	_enter(",%zu,{%x,%x},%u",
+	       max_data_size, ntohl(xdr[0]), ntohl(xdr[1]), toklen);
+
+	td->tag = ntohl(*xdr++);
+	len = ntohl(*xdr++);
+	toklen -= 8;
+	if (len > max_data_size)
+		return -EINVAL;
+	td->data_len = len;
+
+	if (len > 0) {
+		td->data = kmalloc(len, GFP_KERNEL);
+		if (!td->data)
+			return -ENOMEM;
+		memcpy(td->data, xdr, len);
+		len = (len + 3) & ~3;
+		toklen -= len;
+		xdr += len >> 2;
+	}
+
+	_debug("tag %x len %x", td->tag, td->data_len);
+
+	*_xdr = xdr;
+	*_toklen = toklen;
+	_leave(" = 0 [toklen=%u]", toklen);
+	return 0;
+}
+
+/*
+ * extract an array of tagged data
+ */
+static int rxrpc_krb5_decode_tagged_array(struct krb5_tagged_data **_td,
+					  u8 *_n_elem,
+					  u8 max_n_elem,
+					  size_t max_elem_size,
+					  const __be32 **_xdr,
+					  unsigned *_toklen)
+{
+	struct krb5_tagged_data *td;
+	const __be32 *xdr = *_xdr;
+	unsigned toklen = *_toklen, n_elem, loop;
+	int ret;
+
+	/* there must be at least one count */
+	if (toklen < 4)
+		return -EINVAL;
+
+	_enter(",,%u,%zu,{%x},%u",
+	       max_n_elem, max_elem_size, ntohl(xdr[0]), toklen);
+
+	n_elem = ntohl(*xdr++);
+	toklen -= 4;
+	if (n_elem < 0 || n_elem > max_n_elem)
+		return -EINVAL;
+	*_n_elem = n_elem;
+	if (n_elem > 0) {
+		if (toklen <= (n_elem + 1) * 4)
+			return -EINVAL;
+
+		_debug("n_elem %d", n_elem);
+
+		td = kcalloc(sizeof(struct krb5_tagged_data), n_elem,
+			     GFP_KERNEL);
+		if (!td)
+			return -ENOMEM;
+		*_td = td;
+
+		for (loop = 0; loop < n_elem; loop++) {
+			ret = rxrpc_krb5_decode_tagged_data(&td[loop],
+							    max_elem_size,
+							    &xdr, &toklen);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	*_xdr = xdr;
+	*_toklen = toklen;
+	_leave(" = 0 [toklen=%u]", toklen);
+	return 0;
+}
+
+/*
+ * extract a krb5 ticket
+ */
+static int rxrpc_krb5_decode_ticket(u8 **_ticket, u16 *_tktlen,
+				    const __be32 **_xdr, unsigned *_toklen)
+{
+	const __be32 *xdr = *_xdr;
+	unsigned toklen = *_toklen, len;
+
+	/* there must be at least one length word */
+	if (toklen <= 4)
+		return -EINVAL;
+
+	_enter(",{%x},%u", ntohl(xdr[0]), toklen);
+
+	len = ntohl(*xdr++);
+	toklen -= 4;
+	if (len > AFSTOKEN_K5_TIX_MAX)
+		return -EINVAL;
+	*_tktlen = len;
+
+	_debug("ticket len %u", len);
+
+	if (len > 0) {
+		*_ticket = kmalloc(len, GFP_KERNEL);
+		if (!*_ticket)
+			return -ENOMEM;
+		memcpy(*_ticket, xdr, len);
+		len = (len + 3) & ~3;
+		toklen -= len;
+		xdr += len >> 2;
+	}
+
+	*_xdr = xdr;
+	*_toklen = toklen;
+	_leave(" = 0 [toklen=%u]", toklen);
+	return 0;
+}
+
+/*
+ * parse an RxK5 type XDR format token
+ * - the caller guarantees we have at least 4 words
+ */
+static int rxrpc_instantiate_xdr_rxk5(struct key *key, const __be32 *xdr,
+				      unsigned toklen)
+{
+	struct rxrpc_key_token *token, **pptoken;
+	struct rxk5_key *rxk5;
+	const __be32 *end_xdr = xdr + (toklen >> 2);
+	int ret;
+
+	_enter(",{%x,%x,%x,%x},%u",
+	       ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), ntohl(xdr[3]),
+	       toklen);
+
+	/* reserve some payload space for this subkey - the length of the token
+	 * is a reasonable approximation */
+	ret = key_payload_reserve(key, key->datalen + toklen);
+	if (ret < 0)
+		return ret;
+
+	token = kzalloc(sizeof(*token), GFP_KERNEL);
+	if (!token)
+		return -ENOMEM;
+
+	rxk5 = kzalloc(sizeof(*rxk5), GFP_KERNEL);
+	if (!rxk5) {
+		kfree(token);
+		return -ENOMEM;
+	}
+
+	token->security_index = RXRPC_SECURITY_RXK5;
+	token->k5 = rxk5;
+
+	/* extract the principals */
+	ret = rxrpc_krb5_decode_principal(&rxk5->client, &xdr, &toklen);
+	if (ret < 0)
+		goto error;
+	ret = rxrpc_krb5_decode_principal(&rxk5->server, &xdr, &toklen);
+	if (ret < 0)
+		goto error;
+
+	/* extract the session key and the encoding type (the tag field ->
+	 * ENCTYPE_xxx) */
+	ret = rxrpc_krb5_decode_tagged_data(&rxk5->session, AFSTOKEN_DATA_MAX,
+					    &xdr, &toklen);
+	if (ret < 0)
+		goto error;
+
+	if (toklen < 4 * 8 + 2 * 4)
+		goto inval;
+	rxk5->authtime	= be64_to_cpup((const __be64 *) xdr);
+	xdr += 2;
+	rxk5->starttime	= be64_to_cpup((const __be64 *) xdr);
+	xdr += 2;
+	rxk5->endtime	= be64_to_cpup((const __be64 *) xdr);
+	xdr += 2;
+	rxk5->renew_till = be64_to_cpup((const __be64 *) xdr);
+	xdr += 2;
+	rxk5->is_skey = ntohl(*xdr++);
+	rxk5->flags = ntohl(*xdr++);
+	toklen -= 4 * 8 + 2 * 4;
+
+	_debug("times: a=%llx s=%llx e=%llx rt=%llx",
+	       rxk5->authtime, rxk5->starttime, rxk5->endtime,
+	       rxk5->renew_till);
+	_debug("is_skey=%x flags=%x", rxk5->is_skey, rxk5->flags);
+
+	/* extract the permitted client addresses */
+	ret = rxrpc_krb5_decode_tagged_array(&rxk5->addresses,
+					     &rxk5->n_addresses,
+					     AFSTOKEN_K5_ADDRESSES_MAX,
+					     AFSTOKEN_DATA_MAX,
+					     &xdr, &toklen);
+	if (ret < 0)
+		goto error;
+
+	ASSERTCMP((end_xdr - xdr) << 2, ==, toklen);
+
+	/* extract the tickets */
+	ret = rxrpc_krb5_decode_ticket(&rxk5->ticket, &rxk5->ticket_len,
+				       &xdr, &toklen);
+	if (ret < 0)
+		goto error;
+	ret = rxrpc_krb5_decode_ticket(&rxk5->ticket2, &rxk5->ticket2_len,
+				       &xdr, &toklen);
+	if (ret < 0)
+		goto error;
+
+	ASSERTCMP((end_xdr - xdr) << 2, ==, toklen);
+
+	/* extract the typed auth data */
+	ret = rxrpc_krb5_decode_tagged_array(&rxk5->authdata,
+					     &rxk5->n_authdata,
+					     AFSTOKEN_K5_AUTHDATA_MAX,
+					     AFSTOKEN_BDATALN_MAX,
+					     &xdr, &toklen);
+	if (ret < 0)
+		goto error;
+
+	ASSERTCMP((end_xdr - xdr) << 2, ==, toklen);
+
+	if (toklen != 0)
+		goto inval;
+
+	/* attach the payload to the key */
+	for (pptoken = (struct rxrpc_key_token **)&key->payload.data;
+	     *pptoken;
+	     pptoken = &(*pptoken)->next)
+		continue;
+	*pptoken = token;
+	if (token->kad->expiry < key->expiry)
+		key->expiry = token->kad->expiry;
+
+	_leave(" = 0");
+	return 0;
+
+inval:
+	ret = -EINVAL;
+error:
+	rxrpc_rxk5_free(rxk5);
+	kfree(token);
+	_leave(" = %d", ret);
+	return ret;
+}
+
+/*
+ * attempt to parse the data as the XDR format
+ * - the caller guarantees we have more than 7 words
+ */
+static int rxrpc_instantiate_xdr(struct key *key, const void *data, size_t datalen)
+{
+	const __be32 *xdr = data, *token;
+	const char *cp;
+	unsigned len, tmp, loop, ntoken, toklen, sec_ix;
+	int ret;
+
+	_enter(",{%x,%x,%x,%x},%zu",
+	       ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), ntohl(xdr[3]),
+	       datalen);
+
+	if (datalen > AFSTOKEN_LENGTH_MAX)
+		goto not_xdr;
+
+	/* XDR is an array of __be32's */
+	if (datalen & 3)
+		goto not_xdr;
+
+	/* the flags should be 0 (the setpag bit must be handled by
+	 * userspace) */
+	if (ntohl(*xdr++) != 0)
+		goto not_xdr;
+	datalen -= 4;
+
+	/* check the cell name */
+	len = ntohl(*xdr++);
+	if (len < 1 || len > AFSTOKEN_CELL_MAX)
+		goto not_xdr;
+	datalen -= 4;
+	tmp = (len + 3) & ~3;
+	if (tmp > datalen)
+		goto not_xdr;
+
+	cp = (const char *) xdr;
+	for (loop = 0; loop < len; loop++)
+		if (!isprint(cp[loop]))
+			goto not_xdr;
+	if (len < tmp)
+		for (; loop < tmp; loop++)
+			if (cp[loop])
+				goto not_xdr;
+	_debug("cellname: [%u/%u] '%*.*s'",
+	       len, tmp, len, len, (const char *) xdr);
+	datalen -= tmp;
+	xdr += tmp >> 2;
+
+	/* get the token count */
+	if (datalen < 12)
+		goto not_xdr;
+	ntoken = ntohl(*xdr++);
+	datalen -= 4;
+	_debug("ntoken: %x", ntoken);
+	if (ntoken < 1 || ntoken > AFSTOKEN_MAX)
+		goto not_xdr;
+
+	/* check each token wrapper */
+	token = xdr;
+	loop = ntoken;
+	do {
+		if (datalen < 8)
+			goto not_xdr;
+		toklen = ntohl(*xdr++);
+		sec_ix = ntohl(*xdr);
+		datalen -= 4;
+		_debug("token: [%x/%zx] %x", toklen, datalen, sec_ix);
+		if (toklen < 20 || toklen > datalen)
+			goto not_xdr;
+		datalen -= (toklen + 3) & ~3;
+		xdr += (toklen + 3) >> 2;
+
+	} while (--loop > 0);
+
+	_debug("remainder: %zu", datalen);
+	if (datalen != 0)
+		goto not_xdr;
+
+	/* okay: we're going to assume it's valid XDR format
+	 * - we ignore the cellname, relying on the key to be correctly named
+	 */
+	do {
+		xdr = token;
+		toklen = ntohl(*xdr++);
+		token = xdr + ((toklen + 3) >> 2);
+		sec_ix = ntohl(*xdr++);
+		toklen -= 4;
+
+		_debug("TOKEN type=%u [%p-%p]", sec_ix, xdr, token);
+
+		switch (sec_ix) {
+		case RXRPC_SECURITY_RXKAD:
+			ret = rxrpc_instantiate_xdr_rxkad(key, xdr, toklen);
+			if (ret != 0)
+				goto error;
+			break;
+
+		case RXRPC_SECURITY_RXK5:
+			ret = rxrpc_instantiate_xdr_rxk5(key, xdr, toklen);
+			if (ret != 0)
+				goto error;
+			break;
+
+		default:
+			ret = -EPROTONOSUPPORT;
+			goto error;
+		}
+
+	} while (--ntoken > 0);
+
+	_leave(" = 0");
+	return 0;
+
+not_xdr:
+	_leave(" = -EPROTO");
+	return -EPROTO;
+error:
+	_leave(" = %d", ret);
+	return ret;
+}
+
+/*
  * instantiate an rxrpc defined key
  * data should be of the form:
  *	OFFSET	LEN	CONTENT
@@ -70,8 +662,8 @@ struct key_type key_type_rxrpc_s = {
  */
 static int rxrpc_instantiate(struct key *key, const void *data, size_t datalen)
 {
-	const struct rxkad_key *tsec;
-	struct rxrpc_key_payload *upayload;
+	const struct rxrpc_key_data_v1 *v1;
+	struct rxrpc_key_token *token, **pp;
 	size_t plen;
 	u32 kver;
 	int ret;
@@ -82,6 +674,13 @@ static int rxrpc_instantiate(struct key *key, const void *data, size_t datalen)
 	if (!data && datalen == 0)
 		return 0;
 
+	/* determine if the XDR payload format is being used */
+	if (datalen > 7 * 4) {
+		ret = rxrpc_instantiate_xdr(key, data, datalen);
+		if (ret != -EPROTO)
+			return ret;
+	}
+
 	/* get the key interface version number */
 	ret = -EINVAL;
 	if (datalen <= 4 || !data)
@@ -98,53 +697,67 @@ static int rxrpc_instantiate(struct key *key, const void *data, size_t datalen)
 
 	/* deal with a version 1 key */
 	ret = -EINVAL;
-	if (datalen < sizeof(*tsec))
+	if (datalen < sizeof(*v1))
 		goto error;
 
-	tsec = data;
-	if (datalen != sizeof(*tsec) + tsec->ticket_len)
+	v1 = data;
+	if (datalen != sizeof(*v1) + v1->ticket_length)
 		goto error;
 
-	_debug("SCIX: %u", tsec->security_index);
-	_debug("TLEN: %u", tsec->ticket_len);
-	_debug("EXPY: %x", tsec->expiry);
-	_debug("KVNO: %u", tsec->kvno);
+	_debug("SCIX: %u", v1->security_index);
+	_debug("TLEN: %u", v1->ticket_length);
+	_debug("EXPY: %x", v1->expiry);
+	_debug("KVNO: %u", v1->kvno);
 	_debug("SKEY: %02x%02x%02x%02x%02x%02x%02x%02x",
-	       tsec->session_key[0], tsec->session_key[1],
-	       tsec->session_key[2], tsec->session_key[3],
-	       tsec->session_key[4], tsec->session_key[5],
-	       tsec->session_key[6], tsec->session_key[7]);
-	if (tsec->ticket_len >= 8)
+	       v1->session_key[0], v1->session_key[1],
+	       v1->session_key[2], v1->session_key[3],
+	       v1->session_key[4], v1->session_key[5],
+	       v1->session_key[6], v1->session_key[7]);
+	if (v1->ticket_length >= 8)
 		_debug("TCKT: %02x%02x%02x%02x%02x%02x%02x%02x",
-		       tsec->ticket[0], tsec->ticket[1],
-		       tsec->ticket[2], tsec->ticket[3],
-		       tsec->ticket[4], tsec->ticket[5],
-		       tsec->ticket[6], tsec->ticket[7]);
+		       v1->ticket[0], v1->ticket[1],
+		       v1->ticket[2], v1->ticket[3],
+		       v1->ticket[4], v1->ticket[5],
+		       v1->ticket[6], v1->ticket[7]);
 
 	ret = -EPROTONOSUPPORT;
-	if (tsec->security_index != 2)
+	if (v1->security_index != RXRPC_SECURITY_RXKAD)
 		goto error;
 
-	key->type_data.x[0] = tsec->security_index;
-
-	plen = sizeof(*upayload) + tsec->ticket_len;
-	ret = key_payload_reserve(key, plen);
+	plen = sizeof(*token->kad) + v1->ticket_length;
+	ret = key_payload_reserve(key, plen + sizeof(*token));
 	if (ret < 0)
 		goto error;
 
 	ret = -ENOMEM;
-	upayload = kmalloc(plen, GFP_KERNEL);
-	if (!upayload)
+	token = kmalloc(sizeof(*token), GFP_KERNEL);
+	if (!token)
 		goto error;
+	token->kad = kmalloc(plen, GFP_KERNEL);
+	if (!token->kad)
+		goto error_free;
+
+	token->security_index		= RXRPC_SECURITY_RXKAD;
+	token->kad->ticket_len		= v1->ticket_length;
+	token->kad->expiry		= v1->expiry;
+	token->kad->kvno		= v1->kvno;
+	memcpy(&token->kad->session_key, &v1->session_key, 8);
+	memcpy(&token->kad->ticket, v1->ticket, v1->ticket_length);
 
 	/* attach the data */
-	memcpy(&upayload->k, tsec, sizeof(*tsec));
-	memcpy(&upayload->k.ticket, (void *)tsec + sizeof(*tsec),
-	       tsec->ticket_len);
-	key->payload.data = upayload;
-	key->expiry = tsec->expiry;
+	key->type_data.x[0]++;
+
+	pp = (struct rxrpc_key_token **)&key->payload.data;
+	while (*pp)
+		pp = &(*pp)->next;
+	*pp = token;
+	if (token->kad->expiry < key->expiry)
+		key->expiry = token->kad->expiry;
+	token = NULL;
 	ret = 0;
 
+error_free:
+	kfree(token);
 error:
 	return ret;
 }
@@ -184,7 +797,26 @@ static int rxrpc_instantiate_s(struct key *key, const void *data,
  */
 static void rxrpc_destroy(struct key *key)
 {
-	kfree(key->payload.data);
+	struct rxrpc_key_token *token;
+
+	while ((token = key->payload.data)) {
+		key->payload.data = token->next;
+		switch (token->security_index) {
+		case RXRPC_SECURITY_RXKAD:
+			kfree(token->kad);
+			break;
+		case RXRPC_SECURITY_RXK5:
+			if (token->k5)
+				rxrpc_rxk5_free(token->k5);
+			break;
+		default:
+			printk(KERN_ERR "Unknown token type %x on rxrpc key\n",
+			       token->security_index);
+			BUG();
+		}
+
+		kfree(token);
+	}
 }
 
 /*
@@ -293,7 +925,7 @@ int rxrpc_get_server_data_key(struct rxrpc_connection *conn,
 
 	struct {
 		u32 kver;
-		struct rxkad_key tsec;
+		struct rxrpc_key_data_v1 v1;
 	} data;
 
 	_enter("");
@@ -308,13 +940,12 @@ int rxrpc_get_server_data_key(struct rxrpc_connection *conn,
 	_debug("key %d", key_serial(key));
 
 	data.kver = 1;
-	data.tsec.security_index = 2;
-	data.tsec.ticket_len = 0;
-	data.tsec.expiry = expiry;
-	data.tsec.kvno = 0;
+	data.v1.security_index = RXRPC_SECURITY_RXKAD;
+	data.v1.ticket_length = 0;
+	data.v1.expiry = expiry;
+	data.v1.kvno = 0;
 
-	memcpy(&data.tsec.session_key, session_key,
-	       sizeof(data.tsec.session_key));
+	memcpy(&data.v1.session_key, session_key, sizeof(data.v1.session_key));
 
 	ret = key_instantiate_and_link(key, &data, sizeof(data), NULL, NULL);
 	if (ret < 0)
@@ -360,3 +991,210 @@ struct key *rxrpc_get_null_key(const char *keyname)
 	return key;
 }
 EXPORT_SYMBOL(rxrpc_get_null_key);
+
+/*
+ * read the contents of an rxrpc key
+ * - this returns the result in XDR form
+ */
+static long rxrpc_read(const struct key *key,
+		       char __user *buffer, size_t buflen)
+{
+	const struct rxrpc_key_token *token;
+	const struct krb5_principal *princ;
+	size_t size;
+	__be32 __user *xdr, *oldxdr;
+	u32 cnlen, toksize, ntoks, tok, zero;
+	u16 toksizes[AFSTOKEN_MAX];
+	int loop;
+
+	_enter("");
+
+	/* we don't know what form we should return non-AFS keys in */
+	if (memcmp(key->description, "afs@", 4) != 0)
+		return -EOPNOTSUPP;
+	cnlen = strlen(key->description + 4);
+
+#define RND(X) (((X) + 3) & ~3)
+
+	/* AFS keys we return in XDR form, so we need to work out the size of
+	 * the XDR */
+	size = 2 * 4;	/* flags, cellname len */
+	size += RND(cnlen);	/* cellname */
+	size += 1 * 4;	/* token count */
+
+	ntoks = 0;
+	for (token = key->payload.data; token; token = token->next) {
+		toksize = 4;	/* sec index */
+
+		switch (token->security_index) {
+		case RXRPC_SECURITY_RXKAD:
+			toksize += 8 * 4;	/* viceid, kvno, key*2, begin,
+						 * end, primary, tktlen */
+			toksize += RND(token->kad->ticket_len);
+			break;
+
+		case RXRPC_SECURITY_RXK5:
+			princ = &token->k5->client;
+			toksize += 4 + princ->n_name_parts * 4;
+			for (loop = 0; loop < princ->n_name_parts; loop++)
+				toksize += RND(strlen(princ->name_parts[loop]));
+			toksize += 4 + RND(strlen(princ->realm));
+
+			princ = &token->k5->server;
+			toksize += 4 + princ->n_name_parts * 4;
+			for (loop = 0; loop < princ->n_name_parts; loop++)
+				toksize += RND(strlen(princ->name_parts[loop]));
+			toksize += 4 + RND(strlen(princ->realm));
+
+			toksize += 8 + RND(token->k5->session.data_len);
+
+			toksize += 4 * 8 + 2 * 4;
+
+			toksize += 4 + token->k5->n_addresses * 8;
+			for (loop = 0; loop < token->k5->n_addresses; loop++)
+				toksize += RND(token->k5->addresses[loop].data_len);
+
+			toksize += 4 + RND(token->k5->ticket_len);
+			toksize += 4 + RND(token->k5->ticket2_len);
+
+			toksize += 4 + token->k5->n_authdata * 8;
+			for (loop = 0; loop < token->k5->n_authdata; loop++)
+				toksize += RND(token->k5->authdata[loop].data_len);
+			break;
+
+		default: /* we have a ticket we can't encode */
+			BUG();
+			continue;
+		}
+
+		_debug("token[%u]: toksize=%u", ntoks, toksize);
+		ASSERTCMP(toksize, <=, AFSTOKEN_LENGTH_MAX);
+
+		toksizes[ntoks++] = toksize;
+		size += toksize + 4; /* each token has a length word */
+	}
+
+#undef RND
+
+	if (!buffer || buflen < size)
+		return size;
+
+	xdr = (__be32 __user *) buffer;
+	zero = 0;
+#define ENCODE(x)				\
+	do {					\
+		__be32 y = htonl(x);		\
+		if (put_user(y, xdr++) < 0)	\
+			goto fault;		\
+	} while(0)
+#define ENCODE_DATA(l, s)						\
+	do {								\
+		u32 _l = (l);						\
+		ENCODE(l);						\
+		if (copy_to_user(xdr, (s), _l) != 0)			\
+			goto fault;					\
+		if (_l & 3 &&						\
+		    copy_to_user((u8 *)xdr + _l, &zero, 4 - (_l & 3)) != 0) \
+			goto fault;					\
+		xdr += (_l + 3) >> 2;					\
+	} while(0)
+#define ENCODE64(x)					\
+	do {						\
+		__be64 y = cpu_to_be64(x);		\
+		if (copy_to_user(xdr, &y, 8) != 0)	\
+			goto fault;			\
+		xdr += 8 >> 2;				\
+	} while(0)
+#define ENCODE_STR(s)				\
+	do {					\
+		const char *_s = (s);		\
+		ENCODE_DATA(strlen(_s), _s);	\
+	} while(0)
+
+	ENCODE(0);					/* flags */
+	ENCODE_DATA(cnlen, key->description + 4);	/* cellname */
+	ENCODE(ntoks);
+
+	tok = 0;
+	for (token = key->payload.data; token; token = token->next) {
+		toksize = toksizes[tok++];
+		ENCODE(toksize);
+		oldxdr = xdr;
+		ENCODE(token->security_index);
+
+		switch (token->security_index) {
+		case RXRPC_SECURITY_RXKAD:
+			ENCODE(token->kad->vice_id);
+			ENCODE(token->kad->kvno);
+			ENCODE_DATA(8, token->kad->session_key);
+			ENCODE(token->kad->start);
+			ENCODE(token->kad->expiry);
+			ENCODE(token->kad->primary_flag);
+			ENCODE_DATA(token->kad->ticket_len, token->kad->ticket);
+			break;
+
+		case RXRPC_SECURITY_RXK5:
+			princ = &token->k5->client;
+			ENCODE(princ->n_name_parts);
+			for (loop = 0; loop < princ->n_name_parts; loop++)
+				ENCODE_STR(princ->name_parts[loop]);
+			ENCODE_STR(princ->realm);
+
+			princ = &token->k5->server;
+			ENCODE(princ->n_name_parts);
+			for (loop = 0; loop < princ->n_name_parts; loop++)
+				ENCODE_STR(princ->name_parts[loop]);
+			ENCODE_STR(princ->realm);
+
+			ENCODE(token->k5->session.tag);
+			ENCODE_DATA(token->k5->session.data_len,
+				    token->k5->session.data);
+
+			ENCODE64(token->k5->authtime);
+			ENCODE64(token->k5->starttime);
+			ENCODE64(token->k5->endtime);
+			ENCODE64(token->k5->renew_till);
+			ENCODE(token->k5->is_skey);
+			ENCODE(token->k5->flags);
+
+			ENCODE(token->k5->n_addresses);
+			for (loop = 0; loop < token->k5->n_addresses; loop++) {
+				ENCODE(token->k5->addresses[loop].tag);
+				ENCODE_DATA(token->k5->addresses[loop].data_len,
+					    token->k5->addresses[loop].data);
+			}
+
+			ENCODE_DATA(token->k5->ticket_len, token->k5->ticket);
+			ENCODE_DATA(token->k5->ticket2_len, token->k5->ticket2);
+
+			ENCODE(token->k5->n_authdata);
+			for (loop = 0; loop < token->k5->n_authdata; loop++) {
+				ENCODE(token->k5->authdata[loop].tag);
+				ENCODE_DATA(token->k5->authdata[loop].data_len,
+					    token->k5->authdata[loop].data);
+			}
+			break;
+
+		default:
+			BUG();
+			break;
+		}
+
+		ASSERTCMP((unsigned long)xdr - (unsigned long)oldxdr, ==,
+			  toksize);
+	}
+
+#undef ENCODE_STR
+#undef ENCODE_DATA
+#undef ENCODE64
+#undef ENCODE
+
+	ASSERTCMP(tok, ==, ntoks);
+	ASSERTCMP((char __user *) xdr - buffer, ==, size);
+	_leave(" = %zu", size);
+	return size;
+
+fault:
+	_leave(" = -EFAULT");
+	return -EFAULT;
+}
diff --git a/net/rxrpc/ar-security.c b/net/rxrpc/ar-security.c
index dc62920ee19a..49b3cc31ee1f 100644
--- a/net/rxrpc/ar-security.c
+++ b/net/rxrpc/ar-security.c
@@ -16,6 +16,7 @@
 #include <linux/crypto.h>
 #include <net/sock.h>
 #include <net/af_rxrpc.h>
+#include <keys/rxrpc-type.h>
 #include "ar-internal.h"
 
 static LIST_HEAD(rxrpc_security_methods);
@@ -122,6 +123,7 @@ EXPORT_SYMBOL_GPL(rxrpc_unregister_security);
  */
 int rxrpc_init_client_conn_security(struct rxrpc_connection *conn)
 {
+	struct rxrpc_key_token *token;
 	struct rxrpc_security *sec;
 	struct key *key = conn->key;
 	int ret;
@@ -135,7 +137,11 @@ int rxrpc_init_client_conn_security(struct rxrpc_connection *conn)
 	if (ret < 0)
 		return ret;
 
-	sec = rxrpc_security_lookup(key->type_data.x[0]);
+	if (!key->payload.data)
+		return -EKEYREJECTED;
+	token = key->payload.data;
+
+	sec = rxrpc_security_lookup(token->security_index);
 	if (!sec)
 		return -EKEYREJECTED;
 	conn->security = sec;
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index ef8f91030a15..713ac593e2e9 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -18,6 +18,7 @@
 #include <linux/ctype.h>
 #include <net/sock.h>
 #include <net/af_rxrpc.h>
+#include <keys/rxrpc-type.h>
 #define rxrpc_debug rxkad_debug
 #include "ar-internal.h"
 
@@ -42,7 +43,7 @@ struct rxkad_level2_hdr {
 	__be32	checksum;	/* decrypted data checksum */
 };
 
-MODULE_DESCRIPTION("RxRPC network protocol type-2 security (Kerberos)");
+MODULE_DESCRIPTION("RxRPC network protocol type-2 security (Kerberos 4)");
 MODULE_AUTHOR("Red Hat, Inc.");
 MODULE_LICENSE("GPL");
 
@@ -59,14 +60,14 @@ static DEFINE_MUTEX(rxkad_ci_mutex);
  */
 static int rxkad_init_connection_security(struct rxrpc_connection *conn)
 {
-	struct rxrpc_key_payload *payload;
 	struct crypto_blkcipher *ci;
+	struct rxrpc_key_token *token;
 	int ret;
 
 	_enter("{%d},{%x}", conn->debug_id, key_serial(conn->key));
 
-	payload = conn->key->payload.data;
-	conn->security_ix = payload->k.security_index;
+	token = conn->key->payload.data;
+	conn->security_ix = token->security_index;
 
 	ci = crypto_alloc_blkcipher("pcbc(fcrypt)", 0, CRYPTO_ALG_ASYNC);
 	if (IS_ERR(ci)) {
@@ -75,8 +76,8 @@ static int rxkad_init_connection_security(struct rxrpc_connection *conn)
 		goto error;
 	}
 
-	if (crypto_blkcipher_setkey(ci, payload->k.session_key,
-				    sizeof(payload->k.session_key)) < 0)
+	if (crypto_blkcipher_setkey(ci, token->kad->session_key,
+				    sizeof(token->kad->session_key)) < 0)
 		BUG();
 
 	switch (conn->security_level) {
@@ -110,7 +111,7 @@ error:
  */
 static void rxkad_prime_packet_security(struct rxrpc_connection *conn)
 {
-	struct rxrpc_key_payload *payload;
+	struct rxrpc_key_token *token;
 	struct blkcipher_desc desc;
 	struct scatterlist sg[2];
 	struct rxrpc_crypt iv;
@@ -123,8 +124,8 @@ static void rxkad_prime_packet_security(struct rxrpc_connection *conn)
 	if (!conn->key)
 		return;
 
-	payload = conn->key->payload.data;
-	memcpy(&iv, payload->k.session_key, sizeof(iv));
+	token = conn->key->payload.data;
+	memcpy(&iv, token->kad->session_key, sizeof(iv));
 
 	desc.tfm = conn->cipher;
 	desc.info = iv.x;
@@ -197,7 +198,7 @@ static int rxkad_secure_packet_encrypt(const struct rxrpc_call *call,
 					u32 data_size,
 					void *sechdr)
 {
-	const struct rxrpc_key_payload *payload;
+	const struct rxrpc_key_token *token;
 	struct rxkad_level2_hdr rxkhdr
 		__attribute__((aligned(8))); /* must be all on one page */
 	struct rxrpc_skb_priv *sp;
@@ -219,8 +220,8 @@ static int rxkad_secure_packet_encrypt(const struct rxrpc_call *call,
 	rxkhdr.checksum = 0;
 
 	/* encrypt from the session key */
-	payload = call->conn->key->payload.data;
-	memcpy(&iv, payload->k.session_key, sizeof(iv));
+	token = call->conn->key->payload.data;
+	memcpy(&iv, token->kad->session_key, sizeof(iv));
 	desc.tfm = call->conn->cipher;
 	desc.info = iv.x;
 	desc.flags = 0;
@@ -400,7 +401,7 @@ static int rxkad_verify_packet_encrypt(const struct rxrpc_call *call,
 				       struct sk_buff *skb,
 				       u32 *_abort_code)
 {
-	const struct rxrpc_key_payload *payload;
+	const struct rxrpc_key_token *token;
 	struct rxkad_level2_hdr sechdr;
 	struct rxrpc_skb_priv *sp;
 	struct blkcipher_desc desc;
@@ -431,8 +432,8 @@ static int rxkad_verify_packet_encrypt(const struct rxrpc_call *call,
 	skb_to_sgvec(skb, sg, 0, skb->len);
 
 	/* decrypt from the session key */
-	payload = call->conn->key->payload.data;
-	memcpy(&iv, payload->k.session_key, sizeof(iv));
+	token = call->conn->key->payload.data;
+	memcpy(&iv, token->kad->session_key, sizeof(iv));
 	desc.tfm = call->conn->cipher;
 	desc.info = iv.x;
 	desc.flags = 0;
@@ -506,7 +507,7 @@ static int rxkad_verify_packet(const struct rxrpc_call *call,
 	if (!call->conn->cipher)
 		return 0;
 
-	if (sp->hdr.securityIndex != 2) {
+	if (sp->hdr.securityIndex != RXRPC_SECURITY_RXKAD) {
 		*_abort_code = RXKADINCONSISTENCY;
 		_leave(" = -EPROTO [not rxkad]");
 		return -EPROTO;
@@ -737,7 +738,7 @@ static int rxkad_respond_to_challenge(struct rxrpc_connection *conn,
 				      struct sk_buff *skb,
 				      u32 *_abort_code)
 {
-	const struct rxrpc_key_payload *payload;
+	const struct rxrpc_key_token *token;
 	struct rxkad_challenge challenge;
 	struct rxkad_response resp
 		__attribute__((aligned(8))); /* must be aligned for crypto */
@@ -778,7 +779,7 @@ static int rxkad_respond_to_challenge(struct rxrpc_connection *conn,
 	if (conn->security_level < min_level)
 		goto protocol_error;
 
-	payload = conn->key->payload.data;
+	token = conn->key->payload.data;
 
 	/* build the response packet */
 	memset(&resp, 0, sizeof(resp));
@@ -797,13 +798,13 @@ static int rxkad_respond_to_challenge(struct rxrpc_connection *conn,
 		(conn->channels[3] ? conn->channels[3]->call_id : 0);
 	resp.encrypted.inc_nonce = htonl(nonce + 1);
 	resp.encrypted.level = htonl(conn->security_level);
-	resp.kvno = htonl(payload->k.kvno);
-	resp.ticket_len = htonl(payload->k.ticket_len);
+	resp.kvno = htonl(token->kad->kvno);
+	resp.ticket_len = htonl(token->kad->ticket_len);
 
 	/* calculate the response checksum and then do the encryption */
 	rxkad_calc_response_checksum(&resp);
-	rxkad_encrypt_response(conn, &resp, &payload->k);
-	return rxkad_send_response(conn, &sp->hdr, &resp, &payload->k);
+	rxkad_encrypt_response(conn, &resp, token->kad);
+	return rxkad_send_response(conn, &sp->hdr, &resp, token->kad);
 
 protocol_error:
 	*_abort_code = abort_code;
@@ -1122,7 +1123,7 @@ static void rxkad_clear(struct rxrpc_connection *conn)
 static struct rxrpc_security rxkad = {
 	.owner				= THIS_MODULE,
 	.name				= "rxkad",
-	.security_index			= RXKAD_VERSION,
+	.security_index			= RXRPC_SECURITY_RXKAD,
 	.init_connection_security	= rxkad_init_connection_security,
 	.prime_packet_security		= rxkad_prime_packet_security,
 	.secure_packet			= rxkad_secure_packet,
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 692d9a41cd23..903e4188b6ca 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -693,13 +693,18 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 			if (new && i > 0)
 				atomic_inc(&new->refcnt);
 
-			qdisc_destroy(old);
+			if (!ingress)
+				qdisc_destroy(old);
 		}
 
-		notify_and_destroy(skb, n, classid, dev->qdisc, new);
-		if (new && !new->ops->attach)
-			atomic_inc(&new->refcnt);
-		dev->qdisc = new ? : &noop_qdisc;
+		if (!ingress) {
+			notify_and_destroy(skb, n, classid, dev->qdisc, new);
+			if (new && !new->ops->attach)
+				atomic_inc(&new->refcnt);
+			dev->qdisc = new ? : &noop_qdisc;
+		} else {
+			notify_and_destroy(skb, n, classid, old, new);
+		}
 
 		if (dev->flags & IFF_UP)
 			dev_activate(dev);
@@ -804,7 +809,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 			stab = qdisc_get_stab(tca[TCA_STAB]);
 			if (IS_ERR(stab)) {
 				err = PTR_ERR(stab);
-				goto err_out3;
+				goto err_out4;
 			}
 			sch->stab = stab;
 		}
@@ -833,7 +838,6 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 		return sch;
 	}
 err_out3:
-	qdisc_put_stab(sch->stab);
 	dev_put(dev);
 	kfree((char *) sch - sch->padded);
 err_out2:
@@ -847,6 +851,7 @@ err_out4:
 	 * Any broken qdiscs that would require a ops->reset() here?
 	 * The qdisc was never in action so it shouldn't be necessary.
 	 */
+	qdisc_put_stab(sch->stab);
 	if (ops->destroy)
 		ops->destroy(sch);
 	goto err_out3;
@@ -1111,12 +1116,16 @@ create_n_graft:
 				 tcm->tcm_parent, tcm->tcm_parent,
 				 tca, &err);
 	else {
-		unsigned int ntx = 0;
+		struct netdev_queue *dev_queue;
 
 		if (p && p->ops->cl_ops && p->ops->cl_ops->select_queue)
-			ntx = p->ops->cl_ops->select_queue(p, tcm);
+			dev_queue = p->ops->cl_ops->select_queue(p, tcm);
+		else if (p)
+			dev_queue = p->dev_queue;
+		else
+			dev_queue = netdev_get_tx_queue(dev, 0);
 
-		q = qdisc_create(dev, netdev_get_tx_queue(dev, ntx), p,
+		q = qdisc_create(dev, dev_queue, p,
 				 tcm->tcm_parent, tcm->tcm_handle,
 				 tca, &err);
 	}
diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c
index 12b2fb04b29b..5a888af7e5da 100644
--- a/net/sched/sch_drr.c
+++ b/net/sched/sch_drr.c
@@ -274,8 +274,10 @@ static int drr_dump_class_stats(struct Qdisc *sch, unsigned long arg,
 	struct tc_drr_stats xstats;
 
 	memset(&xstats, 0, sizeof(xstats));
-	if (cl->qdisc->q.qlen)
+	if (cl->qdisc->q.qlen) {
 		xstats.deficit = cl->deficit;
+		cl->qdisc->qstats.qlen = cl->qdisc->q.qlen;
+	}
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
 	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
diff --git a/net/sched/sch_mq.c b/net/sched/sch_mq.c
index dd5ee022f1f7..d1dea3d5dc92 100644
--- a/net/sched/sch_mq.c
+++ b/net/sched/sch_mq.c
@@ -125,13 +125,18 @@ static struct netdev_queue *mq_queue_get(struct Qdisc *sch, unsigned long cl)
 	return netdev_get_tx_queue(dev, ntx);
 }
 
-static unsigned int mq_select_queue(struct Qdisc *sch, struct tcmsg *tcm)
+static struct netdev_queue *mq_select_queue(struct Qdisc *sch,
+					    struct tcmsg *tcm)
 {
 	unsigned int ntx = TC_H_MIN(tcm->tcm_parent);
+	struct netdev_queue *dev_queue = mq_queue_get(sch, ntx);
 
-	if (!mq_queue_get(sch, ntx))
-		return 0;
-	return ntx - 1;
+	if (!dev_queue) {
+		struct net_device *dev = qdisc_dev(sch);
+
+		return netdev_get_tx_queue(dev, 0);
+	}
+	return dev_queue;
 }
 
 static int mq_graft(struct Qdisc *sch, unsigned long cl, struct Qdisc *new,
@@ -188,6 +193,7 @@ static int mq_dump_class_stats(struct Qdisc *sch, unsigned long cl,
 	struct netdev_queue *dev_queue = mq_queue_get(sch, cl);
 
 	sch = dev_queue->qdisc_sleeping;
+	sch->qstats.qlen = sch->q.qlen;
 	if (gnet_stats_copy_basic(d, &sch->bstats) < 0 ||
 	    gnet_stats_copy_queue(d, &sch->qstats) < 0)
 		return -1;
diff --git a/net/sched/sch_multiq.c b/net/sched/sch_multiq.c
index 069f81c97277..7db2c88ce585 100644
--- a/net/sched/sch_multiq.c
+++ b/net/sched/sch_multiq.c
@@ -359,6 +359,7 @@ static int multiq_dump_class_stats(struct Qdisc *sch, unsigned long cl,
 	struct Qdisc *cl_q;
 
 	cl_q = q->queues[cl - 1];
+	cl_q->qstats.qlen = cl_q->q.qlen;
 	if (gnet_stats_copy_basic(d, &cl_q->bstats) < 0 ||
 	    gnet_stats_copy_queue(d, &cl_q->qstats) < 0)
 		return -1;
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index 0f73c412d04b..93285cecb246 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -322,6 +322,7 @@ static int prio_dump_class_stats(struct Qdisc *sch, unsigned long cl,
 	struct Qdisc *cl_q;
 
 	cl_q = q->queues[cl - 1];
+	cl_q->qstats.qlen = cl_q->q.qlen;
 	if (gnet_stats_copy_basic(d, &cl_q->bstats) < 0 ||
 	    gnet_stats_copy_queue(d, &cl_q->qstats) < 0)
 		return -1;
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 6a4b19094143..bb280e60e00a 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -949,7 +949,7 @@ static int sctp6_rcv(struct sk_buff *skb)
 	return sctp_rcv(skb) ? -1 : 0;
 }
 
-static struct inet6_protocol sctpv6_protocol = {
+static const struct inet6_protocol sctpv6_protocol = {
 	.handler      = sctp6_rcv,
 	.err_handler  = sctp_v6_err,
 	.flags        = INET6_PROTO_NOPOLICY | INET6_PROTO_FINAL,
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 60093be8385d..c557f1fb1c66 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -924,7 +924,7 @@ static struct inet_protosw sctp_stream_protosw = {
 };
 
 /* Register with IP layer.  */
-static struct net_protocol sctp_protocol = {
+static const struct net_protocol sctp_protocol = {
 	.handler     = sctp_rcv,
 	.err_handler = sctp_v4_err,
 	.no_policy   = 1,
diff --git a/net/socket.c b/net/socket.c
index 6d4716559047..2a022c00d85c 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -489,6 +489,7 @@ static struct socket *sock_alloc(void)
 
 	sock = SOCKET_I(inode);
 
+	kmemcheck_annotate_bitfield(sock, type);
 	inode->i_mode = S_IFSOCK | S_IRWXUGO;
 	inode->i_uid = current_fsuid();
 	inode->i_gid = current_fsgid();
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 4c210c2debc6..e5f92ee758f4 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -662,7 +662,7 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 				int k;
 				int wiphy_freq = wiphy->bands[band]->channels[j].center_freq;
 				for (k = 0; k < wreq->num_channels; k++) {
-					int wext_freq = wreq->channel_list[k].m / 100000;
+					int wext_freq = cfg80211_wext_freq(wiphy, &wreq->channel_list[k]);
 					if (wext_freq == wiphy_freq)
 						goto wext_freq_found;
 				}
@@ -675,6 +675,11 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 		wext_freq_not_found: ;
 		}
 	}
+	/* No channels found? */
+	if (!i) {
+		err = -EINVAL;
+		goto out;
+	}
 
 	/* Set real number of channels specified in creq->channels[] */
 	creq->n_channels = i;
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 68307883ec87..7fae7eee65de 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -188,7 +188,7 @@ void cfg80211_conn_work(struct work_struct *work)
 	rtnl_unlock();
 }
 
-static bool cfg80211_get_conn_bss(struct wireless_dev *wdev)
+static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev)
 {
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
 	struct cfg80211_bss *bss;
@@ -205,7 +205,7 @@ static bool cfg80211_get_conn_bss(struct wireless_dev *wdev)
 			       WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY,
 			       capa);
 	if (!bss)
-		return false;
+		return NULL;
 
 	memcpy(wdev->conn->bssid, bss->bssid, ETH_ALEN);
 	wdev->conn->params.bssid = wdev->conn->bssid;
@@ -213,14 +213,14 @@ static bool cfg80211_get_conn_bss(struct wireless_dev *wdev)
 	wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
 	schedule_work(&rdev->conn_work);
 
-	cfg80211_put_bss(bss);
-	return true;
+	return bss;
 }
 
 static void __cfg80211_sme_scan_done(struct net_device *dev)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	struct cfg80211_bss *bss;
 
 	ASSERT_WDEV_LOCK(wdev);
 
@@ -234,7 +234,10 @@ static void __cfg80211_sme_scan_done(struct net_device *dev)
 	    wdev->conn->state != CFG80211_CONN_SCAN_AGAIN)
 		return;
 
-	if (!cfg80211_get_conn_bss(wdev)) {
+	bss = cfg80211_get_conn_bss(wdev);
+	if (bss) {
+		cfg80211_put_bss(bss);
+	} else {
 		/* not found */
 		if (wdev->conn->state == CFG80211_CONN_SCAN_AGAIN)
 			schedule_work(&rdev->conn_work);
@@ -670,6 +673,7 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev,
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct ieee80211_channel *chan;
+	struct cfg80211_bss *bss = NULL;
 	int err;
 
 	ASSERT_WDEV_LOCK(wdev);
@@ -760,7 +764,7 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev,
 
 		/* don't care about result -- but fill bssid & channel */
 		if (!wdev->conn->params.bssid || !wdev->conn->params.channel)
-			cfg80211_get_conn_bss(wdev);
+			bss = cfg80211_get_conn_bss(wdev);
 
 		wdev->sme_state = CFG80211_SME_CONNECTING;
 		wdev->connect_keys = connkeys;
@@ -770,10 +774,11 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev,
 			wdev->conn->prev_bssid_valid = true;
 		}
 
-		/* we're good if we have both BSSID and channel */
-		if (wdev->conn->params.bssid && wdev->conn->params.channel) {
+		/* we're good if we have a matching bss struct */
+		if (bss) {
 			wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
 			err = cfg80211_conn_do_work(wdev);
+			cfg80211_put_bss(bss);
 		} else {
 			/* otherwise we'll need to scan for the AP first */
 			err = cfg80211_conn_scan(wdev);
diff --git a/scripts/Makefile b/scripts/Makefile
index 9dd5b25a1d53..842dbc2d5aed 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -10,7 +10,6 @@
 hostprogs-$(CONFIG_KALLSYMS)     += kallsyms
 hostprogs-$(CONFIG_LOGO)         += pnmtologo
 hostprogs-$(CONFIG_VT)           += conmakehash
-hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash
 hostprogs-$(CONFIG_IKCONFIG)     += bin2c
 
 always		:= $(hostprogs-y) $(hostprogs-m)
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index b52d340d759d..ea9f8a58678f 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1995,6 +1995,7 @@ sub process_file($) {
     my $identifier;
     my $func;
     my $descr;
+    my $in_purpose = 0;
     my $initial_section_counter = $section_counter;
 
     if (defined($ENV{'SRCTREE'})) {
@@ -2044,6 +2045,7 @@ sub process_file($) {
 		    $descr =~ s/\s*$//;
 		    $descr =~ s/\s+/ /;
 		    $declaration_purpose = xml_escape($descr);
+		    $in_purpose = 1;
 		} else {
 		    $declaration_purpose = "";
 		}
@@ -2090,6 +2092,7 @@ sub process_file($) {
 		}
 
 		$in_doc_sect = 1;
+		$in_purpose = 0;
 		$contents = $newcontents;
 		if ($contents ne "") {
 		    while ((substr($contents, 0, 1) eq " ") ||
@@ -2119,11 +2122,19 @@ sub process_file($) {
 	    } elsif (/$doc_content/) {
 		# miguel-style comment kludge, look for blank lines after
 		# @parameter line to signify start of description
-		if ($1 eq "" &&
-			($section =~ m/^@/ || $section eq $section_context)) {
-		    dump_section($file, $section, xml_escape($contents));
-		    $section = $section_default;
-		    $contents = "";
+		if ($1 eq "") {
+		    if ($section =~ m/^@/ || $section eq $section_context) {
+			dump_section($file, $section, xml_escape($contents));
+			$section = $section_default;
+			$contents = "";
+		    } else {
+			$contents .= "\n";
+		    }
+		    $in_purpose = 0;
+		} elsif ($in_purpose == 1) {
+		    # Continued declaration purpose
+		    chomp($declaration_purpose);
+		    $declaration_purpose .= " " . xml_escape($1);
 		} else {
 		    $contents .= $1 . "\n";
 		}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7ed47f66ddd1..129605819560 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7927,8 +7927,9 @@ static struct snd_kcontrol_new alc883_fivestack_mixer[] = {
 
 static struct snd_kcontrol_new alc883_targa_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
@@ -7947,8 +7948,9 @@ static struct snd_kcontrol_new alc883_targa_mixer[] = {
 
 static struct snd_kcontrol_new alc883_targa_2ch_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Speaker Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -7960,6 +7962,15 @@ static struct snd_kcontrol_new alc883_targa_2ch_mixer[] = {
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc883_targa_8ch_mixer[] = {
+	HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
+	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct snd_kcontrol_new alc883_lenovo_101e_2ch_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -9167,7 +9178,8 @@ static struct alc_config_preset alc882_presets[] = {
 		.init_hook = alc882_targa_automute,
 	},
 	[ALC883_TARGA_8ch_DIG] = {
-		.mixers = { alc883_base_mixer, alc883_chmode_mixer },
+		.mixers = { alc883_targa_mixer, alc883_targa_8ch_mixer,
+			    alc883_chmode_mixer },
 		.init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
 				alc883_targa_verbs },
 		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
@@ -13370,7 +13382,8 @@ static const char *alc269_models[ALC269_MODEL_LAST] = {
 	[ALC269_ASUS_EEEPC_P703]	= "eeepc-p703",
 	[ALC269_ASUS_EEEPC_P901]	= "eeepc-p901",
 	[ALC269_FUJITSU]		= "fujitsu",
-	[ALC269_LIFEBOOK]		= "lifebook"
+	[ALC269_LIFEBOOK]		= "lifebook",
+	[ALC269_AUTO]			= "auto",
 };
 
 static struct snd_pci_quirk alc269_cfg_tbl[] = {
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index e31e53dc6962..826137ec3002 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -864,10 +864,6 @@ static struct hda_verb stac92hd73xx_core_init[] = {
 };
 
 static struct hda_verb stac92hd83xxx_core_init[] = {
-	{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x1},
-	{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x1},
-	{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x0},
-
 	/* power state controls amps */
 	{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
 	{}
@@ -1590,8 +1586,8 @@ static unsigned int ref92hd83xxx_pin_configs[10] = {
 };
 
 static unsigned int dell_s14_pin_configs[10] = {
-	0x02214030, 0x02211010, 0x02a19020, 0x01014050,
-	0x40f000f0, 0x01819040, 0x40f000f0, 0x90a60160,
+	0x0221403f, 0x0221101f, 0x02a19020, 0x90170110,
+	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a60160,
 	0x40f000f0, 0x40f000f0,
 };
 
@@ -1690,6 +1686,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
 		      "HP mini 1000", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361b,
 		      "HP HDX", STAC_HP_HDX),  /* HDX16 */
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3620,
+		      "HP dv6", STAC_HP_DV5),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
 		      "HP", STAC_HP_DV5),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
@@ -4166,7 +4164,10 @@ static int stac92xx_init(struct hda_codec *codec)
 		stac92xx_auto_set_pinctl(codec, spec->autocfg.line_out_pins[0],
 				AC_PINCTL_OUT_EN);
 		/* fake event to set up pins */
-		stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
+		if (cfg->hp_pins[0])
+			stac_issue_unsol_event(codec, cfg->hp_pins[0]);
+		else if (cfg->line_out_pins[0])
+			stac_issue_unsol_event(codec, cfg->line_out_pins[0]);
 	} else {
 		stac92xx_auto_init_multi_out(codec);
 		stac92xx_auto_init_hp_out(codec);
@@ -4688,8 +4689,13 @@ static int stac92xx_resume(struct hda_codec *codec)
 	snd_hda_codec_resume_amp(codec);
 	snd_hda_codec_resume_cache(codec);
 	/* fake event to set up pins again to override cached values */
-	if (spec->hp_detect)
-		stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
+	if (spec->hp_detect) {
+		if (spec->autocfg.hp_pins[0])
+			stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
+		else if (spec->autocfg.line_out_pins[0])
+			stac_issue_unsol_event(codec,
+					       spec->autocfg.line_out_pins[0]);
+	}
 	return 0;
 }
 
@@ -5016,7 +5022,7 @@ again:
 		spec->eapd_switch = 1;
 		break;
 	}
-	if (spec->board_config > STAC_92HD73XX_REF) {
+	if (spec->board_config != STAC_92HD73XX_REF) {
 		/* GPIO0 High = Enable EAPD */
 		spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
 		spec->gpio_data = 0x01;
@@ -5066,7 +5072,6 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
 
 	codec->spec = spec;
 	codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
-	spec->mono_nid = 0x19;
 	spec->digbeep_nid = 0x21;
 	spec->mux_nids = stac92hd83xxx_mux_nids;
 	spec->num_muxes = ARRAY_SIZE(stac92hd83xxx_mux_nids);
@@ -5242,7 +5247,7 @@ again:
 		stac92xx_set_config_regs(codec,
 				stac92hd71bxx_brd_tbl[spec->board_config]);
 
-	if (spec->board_config > STAC_92HD71BXX_REF) {
+	if (spec->board_config != STAC_92HD71BXX_REF) {
 		/* GPIO0 = EAPD */
 		spec->gpio_mask = 0x01;
 		spec->gpio_dir = 0x01;
@@ -5375,6 +5380,11 @@ again:
 	case STAC_HP_DV5:
 		snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
 		stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN);
+		/* HP dv6 gives the headphone pin as a line-out.  Thus we
+		 * need to set hp_detect flag here to force to enable HP
+		 * detection.
+		 */
+		spec->hp_detect = 1;
 		break;
 	case STAC_HP_HDX:
 		spec->num_dmics = 1;
@@ -5557,14 +5567,17 @@ static int patch_stac927x(struct hda_codec *codec)
 	spec->dac_list = stac927x_dac_nids;
 	spec->multiout.dac_nids = spec->dac_nids;
 
+	if (spec->board_config != STAC_D965_REF) {
+		/* GPIO0 High = Enable EAPD */
+		spec->eapd_mask = spec->gpio_mask = 0x01;
+		spec->gpio_dir = spec->gpio_data = 0x01;
+	}
+
 	switch (spec->board_config) {
 	case STAC_D965_3ST:
 	case STAC_D965_5ST:
 		/* GPIO0 High = Enable EAPD */
-		spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x01;
-		spec->gpio_data = 0x01;
 		spec->num_dmics = 0;
-
 		spec->init = d965_core_init;
 		break;
 	case STAC_DELL_BIOS:
@@ -5583,16 +5596,11 @@ static int patch_stac927x(struct hda_codec *codec)
 		snd_hda_codec_set_pincfg(codec, 0x0e, 0x02a79130);
 		/* fallthru */
 	case STAC_DELL_3ST:
-		/* GPIO2 High = Enable EAPD */
-		spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04;
-		spec->gpio_data = 0x04;
-		switch (codec->subsystem_id) {
-		case 0x1028022f:
-			/* correct EAPD to be GPIO0 */
-			spec->eapd_mask = spec->gpio_mask = 0x01;
-			spec->gpio_dir = spec->gpio_data = 0x01;
-			break;
-		};
+		if (codec->subsystem_id != 0x1028022f) {
+			/* GPIO2 High = Enable EAPD */
+			spec->eapd_mask = spec->gpio_mask = 0x04;
+			spec->gpio_dir = spec->gpio_data = 0x04;
+		}
 		spec->dmic_nids = stac927x_dmic_nids;
 		spec->num_dmics = STAC927X_NUM_DMICS;
 
@@ -5601,14 +5609,9 @@ static int patch_stac927x(struct hda_codec *codec)
 		spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
 		break;
 	default:
-		if (spec->board_config > STAC_D965_REF) {
-			/* GPIO0 High = Enable EAPD */
-			spec->eapd_mask = spec->gpio_mask = 0x01;
-			spec->gpio_dir = spec->gpio_data = 0x01;
-		}
 		spec->num_dmics = 0;
-
 		spec->init = stac927x_core_init;
+		break;
 	}
 
 	spec->num_caps = STAC927X_NUM_CAPS;
diff --git a/sound/soc/codecs/ad1836.c b/sound/soc/codecs/ad1836.c
index 3612bb92df90..01343dc984fd 100644
--- a/sound/soc/codecs/ad1836.c
+++ b/sound/soc/codecs/ad1836.c
@@ -18,7 +18,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <sound/core.h>
diff --git a/sound/soc/codecs/ad1938.c b/sound/soc/codecs/ad1938.c
index e62b27701a49..9a049a1995a3 100644
--- a/sound/soc/codecs/ad1938.c
+++ b/sound/soc/codecs/ad1938.c
@@ -28,7 +28,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <sound/core.h>
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index d8a013ab3177..98d663afc97d 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 091dacb78b4d..2f7da49ed34f 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -145,7 +145,7 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	prtd->master_lch = ret;
 
 	/* Request parameter RAM reload slot */
-	ret = edma_alloc_slot(EDMA_SLOT_ANY);
+	ret = edma_alloc_slot(EDMA_CTLR(prtd->master_lch), EDMA_SLOT_ANY);
 	if (ret < 0) {
 		edma_free_channel(prtd->master_lch);
 		return ret;
@@ -162,8 +162,8 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	 * so davinci_pcm_enqueue_dma() takes less time in IRQ.
 	 */
 	edma_read_slot(prtd->slave_lch, &p_ram);
-	p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch);
-	p_ram.link_bcntrld = prtd->slave_lch << 5;
+	p_ram.opt |= TCINTEN | EDMA_TCC(EDMA_CHAN_SLOT(prtd->master_lch));
+	p_ram.link_bcntrld = EDMA_CHAN_SLOT(prtd->slave_lch) << 5;
 	edma_write_slot(prtd->slave_lch, &p_ram);
 
 	return 0;
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index 9ff62e3a9b1d..6096d22283e6 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -447,6 +447,7 @@ int mpc5200_audio_dma_create(struct of_device *op)
 	int size, irq, rc;
 	const __be32 *prop;
 	void __iomem *regs;
+	int ret;
 
 	/* Fetch the registers and IRQ of the PSC */
 	irq = irq_of_parse_and_map(op->node, 0);
@@ -463,14 +464,16 @@ int mpc5200_audio_dma_create(struct of_device *op)
 	/* Allocate and initialize the driver private data */
 	psc_dma = kzalloc(sizeof *psc_dma, GFP_KERNEL);
 	if (!psc_dma) {
-		iounmap(regs);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_unmap;
 	}
 
 	/* Get the PSC ID */
 	prop = of_get_property(op->node, "cell-index", &size);
-	if (!prop || size < sizeof *prop)
-		return -ENODEV;
+	if (!prop || size < sizeof *prop) {
+		ret = -ENODEV;
+		goto out_free;
+	}
 
 	spin_lock_init(&psc_dma->lock);
 	mutex_init(&psc_dma->mutex);
@@ -493,9 +496,8 @@ int mpc5200_audio_dma_create(struct of_device *op)
 	if (!psc_dma->capture.bcom_task ||
 	    !psc_dma->playback.bcom_task) {
 		dev_err(&op->dev, "Could not allocate bestcomm tasks\n");
-		iounmap(regs);
-		kfree(psc_dma);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_free;
 	}
 
 	/* Disable all interrupts and reset the PSC */
@@ -537,12 +539,8 @@ int mpc5200_audio_dma_create(struct of_device *op)
 			  &psc_dma_bcom_irq_tx, IRQF_SHARED,
 			  "psc-dma-playback", &psc_dma->playback);
 	if (rc) {
-		free_irq(psc_dma->irq, psc_dma);
-		free_irq(psc_dma->capture.irq,
-			 &psc_dma->capture);
-		free_irq(psc_dma->playback.irq,
-			 &psc_dma->playback);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_irq;
 	}
 
 	/* Save what we've done so it can be found again later */
@@ -550,6 +548,15 @@ int mpc5200_audio_dma_create(struct of_device *op)
 
 	/* Tell the ASoC OF helpers about it */
 	return snd_soc_register_platform(&mpc5200_audio_dma_platform);
+out_irq:
+	free_irq(psc_dma->irq, psc_dma);
+	free_irq(psc_dma->capture.irq, &psc_dma->capture);
+	free_irq(psc_dma->playback.irq, &psc_dma->playback);
+out_free:
+	kfree(psc_dma);
+out_unmap:
+	iounmap(regs);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(mpc5200_audio_dma_create);
 
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index aa7af0b8d421..9bc4aa35caab 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -230,6 +230,8 @@ static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
 }
 
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
 /*
  * Wait for the LR signal to allow synchronisation to the L/R clock
  * from the codec. May only be needed for slave mode.
@@ -237,19 +239,21 @@ static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
 static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s)
 {
 	u32 iiscon;
-	unsigned long timeout = jiffies + msecs_to_jiffies(5);
+	unsigned long loops = msecs_to_loops(5);
 
 	pr_debug("Entered %s\n", __func__);
 
-	while (1) {
+	while (--loops) {
 		iiscon = readl(i2s->regs + S3C2412_IISCON);
 		if (iiscon & S3C2412_IISCON_LRINDEX)
 			break;
 
-		if (timeout < jiffies) {
-			printk(KERN_ERR "%s: timeout\n", __func__);
-			return -ETIMEDOUT;
-		}
+		cpu_relax();
+	}
+
+	if (!loops) {
+		printk(KERN_ERR "%s: timeout\n", __func__);
+		return -ETIMEDOUT;
 	}
 
 	return 0;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 0d8b08ef8731..f79711b9fa5b 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -1131,9 +1131,10 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
 	ret = snprintf(buf, PAGE_SIZE, "%s: %s  in %d out %d\n",
 		       w->name, w->power ? "On" : "Off", in, out);
 
-	if (w->active && w->sname)
-		ret += snprintf(buf, PAGE_SIZE - ret, " stream %s active\n",
-				w->sname);
+	if (w->sname)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
+				w->sname,
+				w->active ? "active" : "inactive");
 
 	list_for_each_entry(p, &w->sources, list_sink) {
 		if (p->connect)