diff options
39 files changed, 1526 insertions, 395 deletions
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig index 66a10b50d938..232f8eeb72e3 100644 --- a/arch/arm/configs/am3517_evm_defconfig +++ b/arch/arm/configs/am3517_evm_defconfig @@ -422,15 +422,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=y +CONFIG_CAN_DEV=y +CONFIG_CAN_CALC_BITTIMING=y +CONFIG_CAN_TI_HECC=y +# CONFIG_CAN_SJA1000 is not set + +# +# CAN USB interfaces +# +# CONFIG_CAN_EMS_USB is not set +CONFIG_CAN_DEBUG_DEVICES=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -517,7 +531,75 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set -# CONFIG_NETDEVICES is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_TI_DAVINCI_EMAC=y +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 3b3a3775bbf4..6d8a0c891f80 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -47,6 +47,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set +CONFIG_TREE_PREEMPT_RCU=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y @@ -95,9 +96,8 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y -# CONFIG_LBD is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # # IO Schedulers @@ -699,6 +699,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +CONFIG_SERIO_AMS_DELTA=y # CONFIG_GAMEPORT is not set # @@ -835,7 +836,8 @@ CONFIG_DAB=y # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y # # Display device support @@ -1283,7 +1285,7 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig index 61a817e8cf81..c7a68202fa3f 100644 --- a/arch/arm/configs/devkit8000_defconfig +++ b/arch/arm/configs/devkit8000_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc6 -# Thu Feb 4 15:42:56 2010 +# Linux kernel version: 2.6.34-rc2 +# Wed Mar 24 13:27:25 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -19,7 +20,9 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,11 +63,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -96,10 +94,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -170,7 +172,7 @@ CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # System Type @@ -181,6 +183,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -190,7 +193,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -207,21 +209,26 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # # TI OMAP Implementations @@ -237,16 +244,20 @@ CONFIG_ARCH_OMAP3=y # OMAP Feature Selections # # CONFIG_OMAP_RESET_CLOCKS is not set -# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y +# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y CONFIG_ARCH_OMAP3430=y +CONFIG_OMAP_PACKAGE_CUS=y # # OMAP Board Type @@ -295,6 +306,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -387,7 +399,14 @@ CONFIG_HAVE_AOUT=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -395,7 +414,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -666,6 +684,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -717,6 +736,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set +# CONFIG_TI_DAVINCI_EMAC is not set CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=4 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y @@ -863,6 +883,7 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -891,6 +912,7 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_OCORES is not set CONFIG_I2C_OMAP=y # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -904,15 +926,9 @@ CONFIG_I2C_OMAP=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -944,10 +960,12 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -984,10 +1002,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set CONFIG_TWL4030_CORE=y CONFIG_TWL4030_POWER=y @@ -998,22 +1018,25 @@ CONFIG_TWL4030_CODEC=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_TWL4030=y # CONFIG_REGULATOR_LP3971 is not set @@ -1072,7 +1095,6 @@ CONFIG_OMAP2_DSS_VENC=y CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 CONFIG_FB_OMAP2=y CONFIG_FB_OMAP2_DEBUG_SUPPORT=y -# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set CONFIG_FB_OMAP2_NUM_FBS=3 # @@ -1080,7 +1102,9 @@ CONFIG_FB_OMAP2_NUM_FBS=3 # CONFIG_PANEL_GENERIC=y # CONFIG_PANEL_SHARP_LS037V7DW01 is not set -CONFIG_PANEL_INNOLUX_AT070TN83=y +# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set +# CONFIG_PANEL_TOPPOLY_TDO35S is not set +# CONFIG_PANEL_TPO_TD043MTEA1 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1136,6 +1160,7 @@ CONFIG_SND_ARM=y CONFIG_SND_SPI=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y @@ -1147,42 +1172,44 @@ CONFIG_SND_SOC_TWL4030=y # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HIDRAW=y +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_HID_PID is not set -CONFIG_USB_HIDDEV=y +# CONFIG_USB_HIDDEV is not set # # Special HID drivers # -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y +# CONFIG_HID_3M_PCT is not set +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set # CONFIG_HID_DRAGONRISE is not set -CONFIG_HID_EZKEY=y +# CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set -CONFIG_HID_GYRATION=y +# CONFIG_HID_GYRATION is not set # CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set +# CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set +# CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set @@ -1193,7 +1220,7 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # @@ -1202,7 +1229,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set +CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y @@ -1230,15 +1257,15 @@ CONFIG_USB_MUSB_SOC=y # # OMAP 343x high speed USB support # -CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_PERIPHERAL is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set -# CONFIG_USB_MUSB_DEBUG is not set +CONFIG_USB_MUSB_DEBUG=y # # USB Device Class drivers @@ -1291,7 +1318,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1304,9 +1330,8 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y @@ -1314,8 +1339,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_LH7A40X is not set -CONFIG_USB_GADGET_OMAP=y -CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set @@ -1330,19 +1354,20 @@ CONFIG_USB_OMAP=y # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_GADGETFS=m +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_MASS_STORAGE is not set -CONFIG_USB_G_SERIAL=m +# CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -CONFIG_USB_G_PRINTER=m +# CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1373,8 +1398,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_OMAP is not set CONFIG_MMC_OMAP_HS=y -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1392,11 +1415,11 @@ CONFIG_LEDS_GPIO_PLATFORM=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set @@ -1580,6 +1603,7 @@ CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1606,6 +1630,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig index d6ad92177324..1efb833147c2 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap3_defconfig @@ -264,7 +264,7 @@ CONFIG_MACH_OMAP_GENERIC=y # OMAP Core Type # CONFIG_ARCH_OMAP2420=y -# CONFIG_ARCH_OMAP2430 is not set +CONFIG_ARCH_OMAP2430=y CONFIG_ARCH_OMAP3430=y CONFIG_OMAP_PACKAGE_CBB=y CONFIG_OMAP_PACKAGE_CUS=y @@ -276,8 +276,9 @@ CONFIG_OMAP_PACKAGE_CBP=y CONFIG_MACH_OMAP2_TUSB6010=y CONFIG_MACH_OMAP_H4=y CONFIG_MACH_OMAP_APOLLON=y -# CONFIG_MACH_OMAP_2430SDP is not set +CONFIG_MACH_OMAP_2430SDP=y CONFIG_MACH_OMAP3_BEAGLE=y +CONFIG_MACH_DEVKIT8000=y CONFIG_MACH_OMAP_LDP=y CONFIG_MACH_OVERO=y CONFIG_MACH_OMAP3EVM=y @@ -390,7 +391,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -443,7 +444,7 @@ CONFIG_BINFMT_MISC=y # CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y +# CONFIG_PM_VERBOSE is not set CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y @@ -1262,7 +1263,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers @@ -1291,9 +1292,9 @@ CONFIG_MFD_CORE=y # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set -# CONFIG_MENELAUS is not set +CONFIG_MENELAUS=y CONFIG_TWL4030_CORE=y -# CONFIG_TWL4030_POWER is not set +CONFIG_TWL4030_POWER=y CONFIG_TWL4030_CODEC=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set @@ -1312,7 +1313,7 @@ CONFIG_TWL4030_CODEC=y # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set @@ -1320,8 +1321,8 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_TWL4030=y # CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y # CONFIG_MEDIA_SUPPORT is not set # @@ -1358,16 +1359,8 @@ CONFIG_FB_TILEBLITTING=y # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set -CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP is not set CONFIG_FB_OMAP_LCD_VGA=y -# CONFIG_FB_OMAP_031M3R is not set -# CONFIG_FB_OMAP_048M3R is not set -CONFIG_FB_OMAP_079M3R=y -# CONFIG_FB_OMAP_092M9R is not set -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set -# CONFIG_FB_OMAP_LCD_MIPID is not set -# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 # CONFIG_OMAP2_DSS is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y @@ -1686,7 +1679,7 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y # CONFIG_MMC_AT91 is not set # CONFIG_MMC_ATMELMCI is not set @@ -1751,6 +1744,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set +CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 27f489747bbd..b18d7c28ab7a 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -152,6 +152,16 @@ config MACH_AMS_DELTA Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. +config AMS_DELTA_FIQ + bool "Fast Interrupt Request (FIQ) support for the E3" + depends on MACH_AMS_DELTA + select FIQ + help + Provide a FIQ handler for the E3. + This allows for fast handling of interrupts generated + by the clock line of the E3 mailboard (or a PS/2 keyboard) + connected to the GPIO based external keyboard port. + config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index b6a537c875b8..ea231c7a550a 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o +obj-$(CONFIG_AMS_DELTA_FIQ) += ams-delta-fiq.o ams-delta-fiq-handler.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o obj-$(CONFIG_MACH_HERALD) += board-htcherald.o diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S new file mode 100644 index 000000000000..927d5a181760 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -0,0 +1,278 @@ +/* + * linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S + * + * Based on linux/arch/arm/lib/floppydma.S + * Renamed and modified to work with 2.6 kernel by Matt Callow + * Copyright (C) 1995, 1996 Russell King + * Copyright (C) 2004 Pete Trapps + * Copyright (C) 2006 Matt Callow + * Copyright (C) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +#include <plat/io.h> +#include <plat/board-ams-delta.h> + +#include <mach/ams-delta-fiq.h> + +/* + * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. + * Unfortunately, those were not placed in a separate header file. + */ +#define OMAP1510_GPIO_BASE 0xFFFCE000 +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +/* GPIO register bitmasks */ +#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA) +#define KEYBRD_CLK_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK) +#define MODEM_IRQ_MASK (0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ) +#define HOOK_SWITCH_MASK (0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH) +#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) + +/* IRQ handler register bitmasks */ +#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE)) +#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1) + +/* Driver buffer byte offsets */ +#define BUF_MASK (FIQ_MASK * 4) +#define BUF_STATE (FIQ_STATE * 4) +#define BUF_KEYS_CNT (FIQ_KEYS_CNT * 4) +#define BUF_TAIL_OFFSET (FIQ_TAIL_OFFSET * 4) +#define BUF_HEAD_OFFSET (FIQ_HEAD_OFFSET * 4) +#define BUF_BUF_LEN (FIQ_BUF_LEN * 4) +#define BUF_KEY (FIQ_KEY * 4) +#define BUF_MISSED_KEYS (FIQ_MISSED_KEYS * 4) +#define BUF_BUFFER_START (FIQ_BUFFER_START * 4) +#define BUF_GPIO_INT_MASK (FIQ_GPIO_INT_MASK * 4) +#define BUF_KEYS_HICNT (FIQ_KEYS_HICNT * 4) +#define BUF_IRQ_PEND (FIQ_IRQ_PEND * 4) +#define BUF_SIR_CODE_L1 (FIQ_SIR_CODE_L1 * 4) +#define BUF_SIR_CODE_L2 (IRQ_SIR_CODE_L2 * 4) +#define BUF_CNT_INT_00 (FIQ_CNT_INT_00 * 4) +#define BUF_CNT_INT_KEY (FIQ_CNT_INT_KEY * 4) +#define BUF_CNT_INT_MDM (FIQ_CNT_INT_MDM * 4) +#define BUF_CNT_INT_03 (FIQ_CNT_INT_03 * 4) +#define BUF_CNT_INT_HSW (FIQ_CNT_INT_HSW * 4) +#define BUF_CNT_INT_05 (FIQ_CNT_INT_05 * 4) +#define BUF_CNT_INT_06 (FIQ_CNT_INT_06 * 4) +#define BUF_CNT_INT_07 (FIQ_CNT_INT_07 * 4) +#define BUF_CNT_INT_08 (FIQ_CNT_INT_08 * 4) +#define BUF_CNT_INT_09 (FIQ_CNT_INT_09 * 4) +#define BUF_CNT_INT_10 (FIQ_CNT_INT_10 * 4) +#define BUF_CNT_INT_11 (FIQ_CNT_INT_11 * 4) +#define BUF_CNT_INT_12 (FIQ_CNT_INT_12 * 4) +#define BUF_CNT_INT_13 (FIQ_CNT_INT_13 * 4) +#define BUF_CNT_INT_14 (FIQ_CNT_INT_14 * 4) +#define BUF_CNT_INT_15 (FIQ_CNT_INT_15 * 4) +#define BUF_CIRC_BUFF (FIQ_CIRC_BUFF * 4) + + +/* + * Register useage + * r8 - temporary + * r9 - the driver buffer + * r10 - temporary + * r11 - interrupts mask + * r12 - base pointers + * r13 - interrupts status + */ + + .text + + .global qwerty_fiqin_end + +ENTRY(qwerty_fiqin_start) + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ FIQ intrrupt handler + ldr r12, omap_ih1_base @ set pointer to level1 handler + + ldr r11, [r12, #IRQ_MIR_REG_OFFSET] @ fetch interrupts mask + + ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status + bics r13, r13, r11 @ clear masked - any left? + beq exit @ none - spurious FIQ? exit + + ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number + + mov r8, #2 @ reset FIQ agreement + str r8, [r12, #IRQ_CONTROL_REG_OFFSET] + + cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt? + beq gpio @ yes - process it + + mov r8, #1 + orr r8, r11, r8, lsl r10 @ mask spurious interrupt + str r8, [r12, #IRQ_MIR_REG_OFFSET] +exit: + subs pc, lr, #4 @ return from FIQ + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + + + @@@@@@@@@@@@@@@@@@@@@@@@@@@ +gpio: @ GPIO bank interrupt handler + ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank + + ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask +restart: + ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits + bics r13, r13, r11 @ clear masked - any left? + beq exit @ no - spurious interrupt? exit + + orr r11, r11, r13 @ mask all requested interrupts + str r11, [r12, #OMAP1510_GPIO_INT_MASK] + + ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set? + beq hksw @ no - try next source + + + @@@@@@@@@@@@@@@@@@@@@@ + @ Keyboard clock FIQ mode interrupt handler + @ r10 now contains KEYBRD_CLK_MASK, use it + str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt + bic r11, r11, r10 @ unmask it + str r11, [r12, #OMAP1510_GPIO_INT_MASK] + + @ Process keyboard data + ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input + + ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state + cmp r10, #0 @ are we expecting start bit? + bne data @ no - go to data processing + + ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected? + beq hksw @ no - try next source + + @ r8 contains KEYBRD_DATA_MASK, use it + str r8, [r9, #BUF_STATE] @ enter data processing state + @ r10 already contains 0, reuse it + str r10, [r9, #BUF_KEY] @ clear keycode + mov r10, #2 @ reset input bit mask + str r10, [r9, #BUF_MASK] + + @ Mask other GPIO line interrupts till key done + str r11, [r9, #BUF_GPIO_INT_MASK] @ save mask for later restore + mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask + str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register + + b restart @ restart + +data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask + + @ r8 still contains GPIO input bits + ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low? + ldreq r8, [r9, #BUF_KEY] @ yes - fetch collected so far, + orreq r8, r8, r10 @ set 1 at current mask position + streq r8, [r9, #BUF_KEY] @ and save back + + mov r10, r10, lsl #1 @ shift mask left + bics r10, r10, #0x800 @ have we got all the bits? + strne r10, [r9, #BUF_MASK] @ not yet - store the mask + bne restart @ and restart + + @ r10 already contains 0, reuse it + str r10, [r9, #BUF_STATE] @ reset state to start + + @ Key done - restore interrupt mask + ldr r10, [r9, #BUF_GPIO_INT_MASK] @ fetch saved mask + and r11, r11, r10 @ unmask all saved as unmasked + str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ restore into the mask register + + @ Try appending the keycode to the circular buffer + ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count + ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size + cmp r10, r8 @ is buffer full? + beq hksw @ yes - key lost, next source + + add r10, r10, #1 @ incremet keystrokes counter + str r10, [r9, #BUF_KEYS_CNT] + + ldr r10, [r9, #BUF_TAIL_OFFSET] @ get buffer tail offset + @ r8 already contains buffer size + cmp r10, r8 @ end of buffer? + moveq r10, #0 @ yes - rewind to buffer start + + ldr r12, [r9, #BUF_BUFFER_START] @ get buffer start address + add r12, r12, r10, LSL #2 @ calculate buffer tail address + ldr r8, [r9, #BUF_KEY] @ get last keycode + str r8, [r12] @ append it to the buffer tail + + add r10, r10, #1 @ increment buffer tail offset + str r10, [r9, #BUF_TAIL_OFFSET] + + ldr r10, [r9, #BUF_CNT_INT_KEY] @ increment interrupts counter + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_KEY] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +hksw: @Is hook switch interrupt requested? + tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set? + beq mdm @ no - try next source + + + @@@@@@@@@@@@@@@@@@@@@@@@ + @ Hook switch interrupt FIQ mode simple handler + + @ Don't toggle active edge, the switch always bounces + + @ Increment hook switch interrupt counter + ldr r10, [r9, #BUF_CNT_INT_HSW] + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_HSW] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +mdm: @Is it a modem interrupt? + tst r13, #MODEM_IRQ_MASK @ is modem status bit set? + beq irq @ no - check for next interrupt + + + @@@@@@@@@@@@@@@@@@@@@@@@ + @ Modem FIQ mode interrupt handler stub + + @ Increment modem interrupt counter + ldr r10, [r9, #BUF_CNT_INT_MDM] + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_MDM] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +irq: @ Place deferred_fiq interrupt request + ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler + mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit + str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register + + ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank + b restart @ check for next GPIO interrupt + @@@@@@@@@@@@@@@@@@@@@@@@@@@ + + +/* + * Virtual addresses for IO + */ +omap_ih1_base: + .word OMAP1_IO_ADDRESS(OMAP_IH1_BASE) +deferred_fiq_ih_base: + .word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE) +omap1510_gpio_base: + .word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE) +qwerty_fiqin_end: + +/* + * Check the size of the FIQ, + * it cannot go beyond 0xffff0200, and is copied to 0xffff001c + */ +.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c) + .err +.endif diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c new file mode 100644 index 000000000000..6c994e2d8879 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -0,0 +1,155 @@ +/* + * Amstrad E3 FIQ handling + * + * Copyright (C) 2009 Janusz Krzysztofik + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2004 Amstrad Plc + * Copyright (C) 2001 RidgeRun, Inc. + * + * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c + * in the MontaVista 2.4 kernel (and the Amstrad changes therein) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/io.h> + +#include <plat/board-ams-delta.h> + +#include <asm/fiq.h> +#include <mach/ams-delta-fiq.h> + +static struct fiq_handler fh = { + .name = "ams-delta-fiq" +}; + +/* + * This buffer is shared between FIQ and IRQ contexts. + * The FIQ and IRQ isrs can both read and write it. + * It is structured as a header section several 32bit slots, + * followed by the circular buffer where the FIQ isr stores + * keystrokes received from the qwerty keyboard. + * See ams-delta-fiq.h for details of offsets. + */ +unsigned int fiq_buffer[1024]; +EXPORT_SYMBOL(fiq_buffer); + +static unsigned int irq_counter[16]; + +static irqreturn_t deferred_fiq(int irq, void *dev_id) +{ + struct irq_desc *irq_desc; + struct irq_chip *irq_chip = NULL; + int gpio, irq_num, fiq_count; + + irq_desc = irq_to_desc(IH_GPIO_BASE); + if (irq_desc) + irq_chip = irq_desc->chip; + + /* + * For each handled GPIO interrupt, keep calling its interrupt handler + * until the IRQ counter catches the FIQ incremented interrupt counter. + */ + for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK; + gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) { + irq_num = gpio_to_irq(gpio); + fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; + + while (irq_counter[gpio] < fiq_count) { + if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { + /* + * It looks like handle_edge_irq() that + * OMAP GPIO edge interrupts default to, + * expects interrupt already unmasked. + */ + if (irq_chip && irq_chip->unmask) + irq_chip->unmask(irq_num); + } + generic_handle_irq(irq_num); + + irq_counter[gpio]++; + } + } + return IRQ_HANDLED; +} + +void __init ams_delta_init_fiq(void) +{ + void *fiqhandler_start; + unsigned int fiqhandler_length; + struct pt_regs FIQ_regs; + unsigned long val, offset; + int i, retval; + + fiqhandler_start = &qwerty_fiqin_start; + fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start; + pr_info("Installing fiq handler from %p, length 0x%x\n", + fiqhandler_start, fiqhandler_length); + + retval = claim_fiq(&fh); + if (retval) { + pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", + retval); + return; + } + + retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, + IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0); + if (retval < 0) { + pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); + release_fiq(&fh); + return; + } + /* + * Since no set_type() method is provided by OMAP irq chip, + * switch to edge triggered interrupt type manually. + */ + offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; + val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); + omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); + + set_fiq_handler(fiqhandler_start, fiqhandler_length); + + /* + * Initialise the buffer which is shared + * between FIQ mode and IRQ mode + */ + fiq_buffer[FIQ_GPIO_INT_MASK] = 0; + fiq_buffer[FIQ_MASK] = 0; + fiq_buffer[FIQ_STATE] = 0; + fiq_buffer[FIQ_KEY] = 0; + fiq_buffer[FIQ_KEYS_CNT] = 0; + fiq_buffer[FIQ_KEYS_HICNT] = 0; + fiq_buffer[FIQ_TAIL_OFFSET] = 0; + fiq_buffer[FIQ_HEAD_OFFSET] = 0; + fiq_buffer[FIQ_BUF_LEN] = 256; + fiq_buffer[FIQ_MISSED_KEYS] = 0; + fiq_buffer[FIQ_BUFFER_START] = + (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF]; + + for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++) + fiq_buffer[i] = 0; + + /* + * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr + * will run in an unpredictable context. The fiq_buffer is the FIQ isr's + * only means of communication with the IRQ level and other kernel + * context code. + */ + FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer; + set_fiq_regs(&FIQ_regs); + + pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer); + + /* + * Redirect GPIO interrupts to FIQ + */ + offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; + val = omap_readl(OMAP_IH1_BASE + offset) | 1; + omap_writel(val, OMAP_IH1_BASE + offset); +} diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 7fc11c34b696..fdd1dd53fa9c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -33,6 +33,8 @@ #include <plat/board.h> #include <plat/common.h> +#include <mach/ams-delta-fiq.h> + static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; @@ -236,6 +238,10 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); +#ifdef CONFIG_AMS_DELTA_FIQ + ams_delta_init_fiq(); +#endif + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } @@ -263,8 +269,18 @@ static struct platform_device ams_delta_modem_device = { static int __init ams_delta_modem_init(void) { + int err; + omap_cfg_reg(M14_1510_GPIO2); - ams_delta_modem_ports[0].irq = gpio_to_irq(2); + ams_delta_modem_ports[0].irq = + gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + + err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem"); + if (err) { + pr_err("Couldn't request gpio pin for modem\n"); + return err; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); ams_delta_latch2_write( AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h new file mode 100644 index 000000000000..7a2df29400ca --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -0,0 +1,79 @@ +/* + * arch/arm/mach-omap1/include/ams-delta-fiq.h + * + * Taken from the original Amstrad modifications to fiq.h + * + * Copyright (c) 2004 Amstrad Plc + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __AMS_DELTA_FIQ_H +#define __AMS_DELTA_FIQ_H + +#include <plat/irqs.h> + +/* + * Interrupt number used for passing control from FIQ to IRQ. + * IRQ12, described as reserved, has been selected. + */ +#define INT_DEFERRED_FIQ INT_1510_RES12 +/* + * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to. + */ +#if (INT_DEFERRED_FIQ < IH2_BASE) +#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE +#else +#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE +#endif + +/* + * These are the offsets from the begining of the fiq_buffer. They are put here + * since the buffer and header need to be accessed by drivers servicing devices + * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. + */ +#define FIQ_MASK 0 +#define FIQ_STATE 1 +#define FIQ_KEYS_CNT 2 +#define FIQ_TAIL_OFFSET 3 +#define FIQ_HEAD_OFFSET 4 +#define FIQ_BUF_LEN 5 +#define FIQ_KEY 6 +#define FIQ_MISSED_KEYS 7 +#define FIQ_BUFFER_START 8 +#define FIQ_GPIO_INT_MASK 9 +#define FIQ_KEYS_HICNT 10 +#define FIQ_IRQ_PEND 11 +#define FIQ_SIR_CODE_L1 12 +#define IRQ_SIR_CODE_L2 13 + +#define FIQ_CNT_INT_00 14 +#define FIQ_CNT_INT_KEY 15 +#define FIQ_CNT_INT_MDM 16 +#define FIQ_CNT_INT_03 17 +#define FIQ_CNT_INT_HSW 18 +#define FIQ_CNT_INT_05 19 +#define FIQ_CNT_INT_06 20 +#define FIQ_CNT_INT_07 21 +#define FIQ_CNT_INT_08 22 +#define FIQ_CNT_INT_09 23 +#define FIQ_CNT_INT_10 24 +#define FIQ_CNT_INT_11 25 +#define FIQ_CNT_INT_12 26 +#define FIQ_CNT_INT_13 27 +#define FIQ_CNT_INT_14 28 +#define FIQ_CNT_INT_15 29 + +#define FIQ_CIRC_BUFF 30 /*Start of circular buffer */ + +#ifndef __ASSEMBLER__ +extern unsigned int fiq_buffer[]; +extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end; + +extern void __init ams_delta_init_fiq(void); +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index b6d9584544b4..e8a8cf36b7f0 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,6 +13,8 @@ #include <linux/serial_reg.h> +#include <asm/memory.h> + #include <plat/serial.h> .pushsection .data @@ -37,23 +39,12 @@ omap_uart_virt: .word 0x0 cmp \rx, #0 @ is port configured? bne 99f @ already configured - /* Check 7XX UART1 scratchpad register for uart to use */ + /* Check the debug UART configuration set in uncompress.h */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 - ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)] - cmp \rx, #0 @ anything in 7XX scratchpad? - bne 10f @ found 7XX uart - - /* Check 15xx/16xx UART1 scratchpad register for uart to use */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 - ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] + ldreq \rx, =OMAP_UART_INFO + ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) + ldr \rx, [\rx, #0] /* Select the UART to use based on the UART1 scratchpad value */ 10: cmp \rx, #0 @ no port configured? diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2455dcc744a0..99abac2a8c53 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -10,6 +10,7 @@ config ARCH_OMAP2420 config ARCH_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 + select ARCH_OMAP_OTG config ARCH_OMAP3430 bool "OMAP3430 support" diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 01d113ff9fcf..a11a575745e4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -174,9 +174,18 @@ static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { }, }; +static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { + { + I2C_BOARD_INFO("isp1301_omap", 0x2D), + .flags = I2C_CLIENT_WAKE, + .irq = OMAP_GPIO_IRQ(78), + }, +}; + static int __init omap2430_i2c_init(void) { - omap_register_i2c_bus(1, 400, NULL, 0); + omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, + ARRAY_SIZE(sdp2430_i2c1_boardinfo)); omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo, ARRAY_SIZE(sdp2430_i2c_boardinfo)); return 0; @@ -198,6 +207,15 @@ static struct omap_musb_board_data musb_board_data = { .mode = MUSB_OTG, .power = 100, }; +static struct omap_usb_config sdp2430_usb_config __initdata = { + .otg = 1, +#ifdef CONFIG_USB_GADGET_OMAP + .hmc_mode = 0x0, +#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + .hmc_mode = 0x1, +#endif + .pins[0] = 3, +}; static void __init omap_2430sdp_init(void) { @@ -208,6 +226,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); omap2_hsmmc_init(mmc); + omap_usb_init(&sdp2430_usb_config); usb_musb_init(&musb_board_data); board_smc91x_init(); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index c1c4389fbd8f..19b9e415710d 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -21,6 +21,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/i2c/pca953x.h> +#include <linux/can/platform/ti_hecc.h> +#include <linux/davinci_emac.h> #include <mach/hardware.h> #include <mach/am35xx.h> @@ -30,11 +32,106 @@ #include <plat/board.h> #include <plat/common.h> +#include <plat/control.h> #include <plat/usb.h> #include <plat/display.h> #include "mux.h" +#define AM35XX_EVM_PHY_MASK (0xF) +#define AM35XX_EVM_MDIO_FREQUENCY (1000000) + +static struct emac_platform_data am3517_evm_emac_pdata = { + .phy_mask = AM35XX_EVM_PHY_MASK, + .mdio_max_freq = AM35XX_EVM_MDIO_FREQUENCY, + .rmii_en = 1, +}; + +static struct resource am3517_emac_resources[] = { + { + .start = AM35XX_IPSS_EMAC_BASE, + .end = AM35XX_IPSS_EMAC_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ, + .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ, + .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ, + .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, + .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device am3517_emac_device = { + .name = "davinci_emac", + .id = -1, + .num_resources = ARRAY_SIZE(am3517_emac_resources), + .resource = am3517_emac_resources, +}; + +static void am3517_enable_ethernet_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | + AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static void am3517_disable_ethernet_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +void am3517_evm_ethernet_init(struct emac_platform_data *pdata) +{ + unsigned int regval; + + pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET; + pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET; + pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET; + pdata->mdio_reg_offset = AM35XX_EMAC_MDIO_OFFSET; + pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE; + pdata->version = EMAC_VERSION_2; + pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR; + pdata->interrupt_enable = am3517_enable_ethernet_int; + pdata->interrupt_disable = am3517_disable_ethernet_int; + am3517_emac_device.dev.platform_data = pdata; + platform_device_register(&am3517_emac_device); + + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + + return ; +} + + + #define LCD_PANEL_PWR 176 #define LCD_PANEL_BKLIGHT_PWR 182 #define LCD_PANEL_PWM 181 @@ -119,6 +216,8 @@ static int __init am3517_evm_i2c_init(void) static int lcd_enabled; static int dvi_enabled; +#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ + defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) static void __init am3517_evm_display_init(void) { int r; @@ -162,6 +261,9 @@ err_2: err_1: gpio_free(LCD_PANEL_BKLIGHT_PWR); } +#else +static void __init am3517_evm_display_init(void) {} +#endif static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev) { @@ -275,7 +377,12 @@ static void __init am3517_evm_init_irq(void) static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, +#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ + defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, +#else .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, +#endif .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, @@ -292,6 +399,42 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif + +static struct resource am3517_hecc_resources[] = { + { + .start = AM35XX_IPSS_HECC_BASE, + .end = AM35XX_IPSS_HECC_BASE + 0x3FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_35XX_HECC0_IRQ, + .end = INT_35XX_HECC0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device am3517_hecc_device = { + .name = "ti_hecc", + .id = -1, + .num_resources = ARRAY_SIZE(am3517_hecc_resources), + .resource = am3517_hecc_resources, +}; + +static struct ti_hecc_platform_data am3517_evm_hecc_pdata = { + .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, + .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, + .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, + .mbx_offset = AM35XX_HECC_MBOX_OFFSET, + .int_line = AM35XX_HECC_INT_LINE, + .version = AM35XX_HECC_VERSION, +}; + +static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) +{ + am3517_hecc_device.dev.platform_data = pdata; + platform_device_register(&am3517_hecc_device); +} + static void __init am3517_evm_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -305,6 +448,7 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); usb_ehci_init(&ehci_pdata); + am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ am3517_evm_display_init(); @@ -313,6 +457,8 @@ static void __init am3517_evm_init(void) i2c_register_board_info(1, am3517evm_i2c_boardinfo, ARRAY_SIZE(am3517evm_i2c_boardinfo)); + /*Ethernet*/ + am3517_evm_ethernet_init(&am3517_evm_emac_pdata); } static void __init am3517_evm_map_io(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 2de4f79f03a0..e679a2cc86c3 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -45,6 +45,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/mcspi.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 47e3af2166d4..77022b588816 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -633,8 +633,163 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct omap_board_mux board_mux[] __initdata = { + /* nCS and IRQ for Devkit8000 ethernet */ + OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0), + OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* McSPI 2*/ + OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* PENDOWN GPIO */ + OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* USB 1 */ + OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), + OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + + /* MMC 1 */ + OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* McBSP 2 */ + OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* I2C 1 */ + OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* I2C 2 */ + OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* I2C 3 */ + OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* I2C 4 */ + OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* serial ports */ + OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* DSS */ + OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* expansion port */ + /* McSPI 1 */ + OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + + /* HDQ */ + OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* McSPI4 */ + OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), + + /* MMC 2 */ + OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + + /* I2C3 */ + OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + /* TPS IRQ */ + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ + OMAP_PIN_INPUT_PULLUP), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + static void __init devkit8000_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); omap_dm9000_init(); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 8848c7c5ce48..79ac41400c21 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -63,6 +63,8 @@ #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 +#define OVERO_SMSC911X2_CS 4 +#define OVERO_SMSC911X2_GPIO 65 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) @@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = { }, }; +static struct resource overo_smsc911x2_resources[] = { + { + .name = "smsc911x2-memory", + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + static struct smsc911x_platform_config overo_smsc911x_config = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, @@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = { static struct platform_device overo_smsc911x_device = { .name = "smsc911x", - .id = -1, + .id = 0, .num_resources = ARRAY_SIZE(overo_smsc911x_resources), .resource = overo_smsc911x_resources, .dev = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 4377a4cf36eb..8179d55106d5 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -277,7 +277,7 @@ static struct regulator_consumer_supply rx51_vmmc1_supply = { .dev_name = "mmci-omap-hs.0", }; -static struct regulator_consumer_supply rx51_vmmc2_supply = { +static struct regulator_consumer_supply rx51_vaux3_supply = { .supply = "vmmc", .dev_name = "mmci-omap-hs.1", }; @@ -287,6 +287,35 @@ static struct regulator_consumer_supply rx51_vsim_supply = { .dev_name = "mmci-omap-hs.1", }; +static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { + /* tlv320aic3x analog supplies */ + { + .supply = "AVDD", + .dev_name = "2-0018", + }, + { + .supply = "DRVDD", + .dev_name = "2-0018", + }, + /* Keep vmmc as last item. It is not iterated for newer boards */ + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.1", + }, +}; + +static struct regulator_consumer_supply rx51_vio_supplies[] = { + /* tlv320aic3x digital supplies */ + { + .supply = "IOVDD", + .dev_name = "2-0018" + }, + { + .supply = "DVDD", + .dev_name = "2-0018" + }, +}; + static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -338,7 +367,7 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .consumer_supplies = &rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -370,9 +399,9 @@ static struct regulator_init_data rx51_vmmc1 = { static struct regulator_init_data rx51_vmmc2 = { .constraints = { - .name = "VMMC2_30", - .min_uV = 1850000, - .max_uV = 3150000, + .name = "V28_A", + .min_uV = 2800000, + .max_uV = 3000000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, @@ -380,8 +409,8 @@ static struct regulator_init_data rx51_vmmc2 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), + .consumer_supplies = rx51_vmmc2_supplies, }; static struct regulator_init_data rx51_vsim = { @@ -411,6 +440,20 @@ static struct regulator_init_data rx51_vdac = { }, }; +static struct regulator_init_data rx51_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), + .consumer_supplies = rx51_vio_supplies, +}; + static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ @@ -618,6 +661,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vmmc1 = &rx51_vmmc1, .vsim = &rx51_vsim, .vdac = &rx51_vdac, + .vio = &rx51_vio, }; static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { @@ -629,18 +673,27 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { }, }; +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + }, +}; + static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || - system_rev >= SYSTEM_REV_B_USES_VAUX3) + system_rev >= SYSTEM_REV_B_USES_VAUX3) { rx51_twldata.vaux3 = &rx51_vaux3_mmc; - else { + /* Only older boards use VMMC2 for internal MMC */ + rx51_vmmc2.num_consumer_supplies--; + } else { rx51_twldata.vaux3 = &rx51_vaux3_cam; - rx51_twldata.vmmc2 = &rx51_vmmc2; } + rx51_twldata.vmmc2 = &rx51_vmmc2; omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); - omap_register_i2c_bus(2, 100, NULL, 0); + ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index e15d2e87cfc1..1d7f827b0408 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -82,7 +82,7 @@ static inline void __init zoom_init_smsc911x(void) static struct plat_serial8250_port serial_platform_data[] = { { - .mapbase = 0x10000000, + .mapbase = ZOOM_UART_BASE, .irq = OMAP_GPIO_IRQ(102), .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 9a26f84b1141..803ef14cbf2d 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -91,8 +91,8 @@ static void __init omap_zoom2_map_io(void) } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .phys_io = ZOOM_UART_BASE, + .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, .init_irq = omap_zoom2_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index cd3e40cf3ac1..33147042485f 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -73,8 +73,8 @@ static void __init omap_zoom_init(void) } MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .phys_io = ZOOM_UART_BASE, + .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom_map_io, .init_irq = omap_zoom_init_irq, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 9cba5560519b..6905eb7aa67c 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3472,8 +3472,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", "ick", &emac_ick, CK_AM35XX), - CLK("davinci_emac", "fck", &emac_fck, CK_AM35XX), + CLK("davinci_emac", "emac_clk", &emac_ick, CK_AM35XX), + CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2271b9bd1f50..10f3a3c58cc0 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -786,6 +786,33 @@ static inline void omap_hdq_init(void) static inline void omap_hdq_init(void) {} #endif +/*---------------------------------------------------------------------------*/ + +#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \ + defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE) +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) +static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = { +}; +#else +static struct resource omap_vout_resource[2] = { +}; +#endif + +static struct platform_device omap_vout_device = { + .name = "omap_vout", + .num_resources = ARRAY_SIZE(omap_vout_resource), + .resource = &omap_vout_resource[0], + .id = -1, +}; +static void omap_init_vout(void) +{ + if (platform_device_register(&omap_vout_device) < 0) + printk(KERN_ERR "Unable to register OMAP-VOUT device\n"); +} +#else +static inline void omap_init_vout(void) {} +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -800,6 +827,7 @@ static int __init omap2_init_devices(void) omap_hdq_init(); omap_init_sti(); omap_init_sha1_md5(); + omap_init_vout(); return 0; } diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h index a705f946fc46..f1e13d1ca5e7 100644 --- a/arch/arm/mach-omap2/include/mach/am35xx.h +++ b/arch/arm/mach-omap2/include/mach/am35xx.h @@ -23,4 +23,22 @@ #define AM35XX_IPSS_HECC_BASE 0x5C050000 #define AM35XX_IPSS_VPFE_BASE 0x5C060000 -#endif /* __ASM_ARCH_AM35XX_H */ + +/* HECC module specifc offset definitions */ +#define AM35XX_HECC_SCC_HECC_OFFSET (0x0) +#define AM35XX_HECC_SCC_RAM_OFFSET (0x3000) +#define AM35XX_HECC_RAM_OFFSET (0x3000) +#define AM35XX_HECC_MBOX_OFFSET (0x2000) +#define AM35XX_HECC_INT_LINE (0x0) +#define AM35XX_HECC_VERSION (0x1) + +#define AM35XX_EMAC_CNTRL_OFFSET (0x10000) +#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) +#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) +#define AM35XX_EMAC_MDIO_OFFSET (0x30000) +#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) +#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ + AM3517_EMAC_CNTRL_RAM_OFFSET) +#define AM35XX_EMAC_HW_RAM_ADDR (0x01E20000) + +#endif /* __ASM_ARCH_AM35XX_H */ diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 4a63a2ea484d..35b24409a0c8 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,6 +13,8 @@ #include <linux/serial_reg.h> +#include <asm/memory.h> + #include <plat/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) @@ -40,13 +42,12 @@ omap_uart_lsr: .word 0 cmp \rx, #0 @ is port configured? bne 99f @ already configured - /* Check UART1 scratchpad register for uart to use */ + /* Check the debug UART configuration set in uncompress.h */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xfa000000 @ virtual base - orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4 - ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad + ldreq \rx, =OMAP_UART_INFO + ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) + ldr \rx, [\rx, #0] /* Select the UART to use based on the UART1 scratchpad value */ cmp \rx, #0 @ no port configured? @@ -87,10 +88,10 @@ omap_uart_lsr: .word 0 b 98f 44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -95: mov \rx, #ZOOM_UART_BASE +95: ldr \rx, =ZOOM_UART_BASE ldr \tmp, =omap_uart_phys str \rx, [\tmp, #0] - mov \rx, #ZOOM_UART_VIRT + ldr \rx, =ZOOM_UART_VIRT ldr \tmp, =omap_uart_virt str \rx, [\tmp, #0] mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 87f676acf61d..3cfb425ea67e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -166,6 +166,15 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .length = L4_EMU_34XX_SIZE, .type = MT_DEVICE }, +#if defined(CONFIG_DEBUG_LL) && \ + (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) + { + .virtual = ZOOM_UART_VIRT, + .pfn = __phys_to_pfn(ZOOM_UART_BASE), + .length = SZ_1M, + .type = MT_DEVICE + }, +#endif }; #endif #ifdef CONFIG_ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 07aa7b3c95f7..2ff4dce95ee8 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -1901,26 +1901,15 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), - _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), - _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), - _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), - _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), - _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), - _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), - _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), - _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), - _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), - _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), - _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), @@ -1928,10 +1917,7 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), - _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), - _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), - _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), @@ -1948,8 +1934,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), - _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), - _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), @@ -1958,11 +1942,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), - _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), - _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), - _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), - _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), - _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), @@ -2010,77 +1989,12 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), - _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), - _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), - _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), - _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), - _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), - _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), - _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), - _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), - _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), - _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), - _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), - _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), - _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), - _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), - _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), - _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), - _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), - _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), - _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), - _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), - _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), - _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), - _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), - _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), - _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), - _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), - _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), - _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), - _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), - _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), - _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), - _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), - _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), - _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), - _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), - _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), - _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), - _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), - _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), - _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), - _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), - _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), - _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), - _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), - _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), - _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), - _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), - _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), - _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), - _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), - _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), - _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), - _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), - _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), - _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), - _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), - _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), - _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), - _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), - _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), - _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), - _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), - _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), - _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), - _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 374299ea7ade..7816c4e84a32 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -107,7 +107,7 @@ static void omap2_enter_full_retention(void) l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL; omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0); - omap2_gpio_prepare_for_retention(); + omap2_gpio_prepare_for_idle(PWRDM_POWER_RET); if (omap2_pm_debug) { omap2_pm_dump(0, 0, 0); @@ -141,7 +141,7 @@ no_sleep: tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; omap2_pm_dump(0, 1, tmp); } - omap2_gpio_resume_after_retention(); + omap2_gpio_resume_after_idle(); clk_enable(osc_ck); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1d7169855ac5..24c1966f935e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -391,7 +391,7 @@ void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); - omap2_gpio_prepare_for_retention(); + omap2_gpio_prepare_for_idle(per_next_state); if (per_next_state == PWRDM_POWER_OFF) { if (core_next_state == PWRDM_POWER_ON) { per_next_state = PWRDM_POWER_RET; @@ -467,9 +467,9 @@ void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); + omap2_gpio_resume_after_idle(); if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); - omap2_gpio_resume_after_retention(); omap_uart_resume_idle(2); if (per_state_modified) pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 45a225d09125..955597fd6d35 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -27,6 +27,7 @@ #include <mach/irqs.h> #include <mach/gpio.h> #include <asm/mach/irq.h> +#include <plat/powerdomain.h> /* * OMAP1510 GPIO registers @@ -195,6 +196,7 @@ struct gpio_bank { struct gpio_chip chip; struct clk *dbck; u32 mod_usage; + u32 dbck_enable_mask; }; #define METHOD_MPUIO 0 @@ -303,8 +305,6 @@ struct omap3_gpio_regs { u32 risingdetect; u32 fallingdetect; u32 dataout; - u32 setwkuena; - u32 setdataout; }; static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; @@ -646,6 +646,7 @@ void omap_set_gpio_debounce(int gpio, int enable) goto done; if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + bank->dbck_enable_mask = val; if (enable) clk_enable(bank->dbck); else @@ -724,15 +725,27 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, OMAP4_GPIO_IRQWAKEN0); } } else { - if (trigger != 0) + /* + * GPIO wakeup request can only be generated on edge + * transitions + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA); else __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); } - } else { - if (trigger != 0) + } + /* This part needs to be executed always for OMAP34xx */ + if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { + /* + * Log the edge gpio and manually trigger the IRQ + * after resume if the input level changes + * to avoid irq lost during PER RET/OFF mode + * Applies for omap2 non-wakeup gpio and all omap3 gpios + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) bank->enabled_non_wakeup_gpios |= gpio_bit; else bank->enabled_non_wakeup_gpios &= ~gpio_bit; @@ -1845,7 +1858,8 @@ static int __init _omap_gpio_init(void) __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); } - if (i < ARRAY_SIZE(non_wakeup_gpios)) + if (cpu_is_omap24xx() && + i < ARRAY_SIZE(non_wakeup_gpios)) bank->non_wakeup_gpios = non_wakeup_gpios[i]; gpio_count = 32; } @@ -2028,16 +2042,27 @@ static struct sys_device omap_gpio_device = { static int workaround_enabled; -void omap2_gpio_prepare_for_retention(void) +void omap2_gpio_prepare_for_idle(int power_state) { int i, c = 0; + int min = 0; - /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious - * IRQs will be generated. See OMAP2420 Errata item 1.101. */ - for (i = 0; i < gpio_bank_count; i++) { + if (cpu_is_omap34xx()) + min = 1; + + for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l1, l2; + if (bank->dbck_enable_mask) + clk_disable(bank->dbck); + + if (power_state > PWRDM_POWER_OFF) + continue; + + /* If going to OFF, remove triggering for all + * non-wakeup GPIOs. Otherwise spurious IRQs will be + * generated. See OMAP2420 Errata item 1.101. */ if (!(bank->enabled_non_wakeup_gpios)) continue; @@ -2085,16 +2110,23 @@ void omap2_gpio_prepare_for_retention(void) workaround_enabled = 1; } -void omap2_gpio_resume_after_retention(void) +void omap2_gpio_resume_after_idle(void) { int i; + int min = 0; - if (!workaround_enabled) - return; - for (i = 0; i < gpio_bank_count; i++) { + if (cpu_is_omap34xx()) + min = 1; + for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l, gen, gen0, gen1; + if (bank->dbck_enable_mask) + clk_enable(bank->dbck); + + if (!workaround_enabled) + continue; + if (!(bank->enabled_non_wakeup_gpios)) continue; @@ -2119,7 +2151,7 @@ void omap2_gpio_resume_after_retention(void) * horribly racy, but it's the best we can do to work around * this silicon bug. */ l ^= bank->saved_datain; - l &= bank->non_wakeup_gpios; + l &= bank->enabled_non_wakeup_gpios; /* * No need to generate IRQs for the rising edge for gpio IRQs @@ -2207,10 +2239,6 @@ void omap_gpio_save_context(void) __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); gpio_context[i].dataout = __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); - gpio_context[i].setwkuena = - __raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA); - gpio_context[i].setdataout = - __raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT); } } @@ -2243,10 +2271,6 @@ void omap_gpio_restore_context(void) bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(gpio_context[i].dataout, bank->base + OMAP24XX_GPIO_DATAOUT); - __raw_writel(gpio_context[i].setwkuena, - bank->base + OMAP24XX_GPIO_SETWKUENA); - __raw_writel(gpio_context[i].setdataout, - bank->base + OMAP24XX_GPIO_SETDATAOUT); } } #endif @@ -2286,110 +2310,3 @@ static int __init omap_gpio_sysinit(void) } arch_initcall(omap_gpio_sysinit); - - -#ifdef CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static int dbg_gpio_show(struct seq_file *s, void *unused) -{ - unsigned i, j, gpio; - - for (i = 0, gpio = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = gpio_bank + i; - unsigned bankwidth = 16; - u32 mask = 1; - - if (bank_is_mpuio(bank)) - gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap7xx()) - bankwidth = 32; - - for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { - unsigned irq, value, is_in, irqstat; - const char *label; - - label = gpiochip_is_requested(&bank->chip, j); - if (!label) - continue; - - irq = bank->virtual_irq_start + j; - value = gpio_get_value(gpio); - is_in = gpio_is_input(bank, mask); - - if (bank_is_mpuio(bank)) - seq_printf(s, "MPUIO %2d ", j); - else - seq_printf(s, "GPIO %3d ", gpio); - seq_printf(s, "(%-20.20s): %s %s", - label, - is_in ? "in " : "out", - value ? "hi" : "lo"); - -/* FIXME for at least omap2, show pullup/pulldown state */ - - irqstat = irq_desc[irq].status; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (is_in && ((bank->suspend_wakeup & mask) - || irqstat & IRQ_TYPE_SENSE_MASK)) { - char *trigger = NULL; - - switch (irqstat & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_FALLING: - trigger = "falling"; - break; - case IRQ_TYPE_EDGE_RISING: - trigger = "rising"; - break; - case IRQ_TYPE_EDGE_BOTH: - trigger = "bothedge"; - break; - case IRQ_TYPE_LEVEL_LOW: - trigger = "low"; - break; - case IRQ_TYPE_LEVEL_HIGH: - trigger = "high"; - break; - case IRQ_TYPE_NONE: - trigger = "(?)"; - break; - } - seq_printf(s, ", irq-%d %-8s%s", - irq, trigger, - (bank->suspend_wakeup & mask) - ? " wakeup" : ""); - } -#endif - seq_printf(s, "\n"); - } - - if (bank_is_mpuio(bank)) { - seq_printf(s, "\n"); - gpio = 0; - } - } - return 0; -} - -static int dbg_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, dbg_gpio_show, &inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = dbg_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init omap_gpio_debuginit(void) -{ - (void) debugfs_create_file("omap_gpio", S_IRUGO, - NULL, NULL, &debug_fops); - return 0; -} -late_initcall(omap_gpio_debuginit); -#endif diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index de7c54731cbe..de1c604962eb 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -72,8 +72,8 @@ IH_GPIO_BASE + (nr)) extern int omap_gpio_init(void); /* Call from board init only */ -extern void omap2_gpio_prepare_for_retention(void); -extern void omap2_gpio_resume_after_retention(void); +extern void omap2_gpio_prepare_for_idle(int power_state); +extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); extern void omap_gpio_save_context(void); diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 401701977dbb..c01d9f08a198 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,4 +428,8 @@ void omap3_intc_resume_idle(void); #include <mach/hardware.h> +#ifdef CONFIG_FIQ +#define FIQ_START 1024 +#endif + #endif diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index f235d32cd942..ffd909fa5287 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -61,9 +61,9 @@ # define OMAP_NAME omap16xx # endif #endif -#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) +#ifdef CONFIG_ARCH_OMAP2PLUS # if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2 can't be selected at the same time" +# error "OMAP1 and OMAP2PLUS can't be selected at the same time" # endif #endif #ifdef CONFIG_ARCH_OMAP2420 @@ -82,12 +82,20 @@ # define OMAP_NAME omap2430 # endif #endif -#ifdef CONFIG_ARCH_OMAP3430 +#ifdef CONFIG_ARCH_OMAP3 # ifdef OMAP_NAME # undef MULTI_OMAP2 # define MULTI_OMAP2 # else -# define OMAP_NAME omap3430 +# define OMAP_NAME omap3 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP4 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap4 # endif #endif diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 83dce4c4f7e6..19145f5c32ba 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -15,6 +15,20 @@ #include <linux/init.h> +/* + * Memory entry used for the DEBUG_LL UART configuration. See also + * uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc) + /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 #define OMAP1_UART2_BASE 0xfffb0800 @@ -39,7 +53,7 @@ /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfb000000 +#define ZOOM_UART_VIRT 0xfa400000 #define OMAP_PORT_SHIFT 2 #define OMAP7XX_PORT_SHIFT 0 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 81d9ec540fcf..bbedd71943f6 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -20,27 +20,21 @@ #include <linux/types.h> #include <linux/serial_reg.h> +#include <asm/memory.h> #include <asm/mach-types.h> #include <plat/serial.h> -static volatile u8 *uart1_base; -static int uart1_shift; - static volatile u8 *uart_base; static int uart_shift; /* - * Store the DEBUG_LL uart number into UART1 scratchpad register. + * Store the DEBUG_LL uart number into memory. * See also debug-macro.S, and serial.c for related code. - * - * Please note that we currently assume that: - * - UART1 clocks are enabled for register access - * - UART1 scratchpad register can be used */ -static void set_uart1_scratchpad(unsigned char port) +static void set_omap_uart_info(unsigned char port) { - uart1_base[UART_SCR << uart1_shift] = port; + *(volatile u32 *)OMAP_UART_INFO = port; } static void putc(int c) @@ -60,42 +54,38 @@ static inline void flush(void) /* * Macros to configure UART1 and debug UART */ -#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft, \ - dbg_uart, dbg_shft, dbg_id) \ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ if (machine_is_##mach()) { \ - uart1_base = (volatile u8 *)(uart1_phys); \ - uart1_shift = (uart1_shft); \ uart_base = (volatile u8 *)(dbg_uart); \ uart_shift = (dbg_shft); \ port = (dbg_id); \ - set_uart1_scratchpad(port); \ + set_omap_uart_info(port); \ break; \ } #define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p) + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) #define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p) + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) #define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p) + _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP2UART##p) #define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p) + _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP3UART##p) #define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p) + _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP4UART##p) /* Zoom2/3 shift is different for UART1 and external port */ #define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \ - ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) + _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) static inline void __arch_decomp_setup(unsigned long arch_id) { diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 51f4dfb82e2b..226b2e858d6c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -437,6 +437,20 @@ static inline int omap34xx_sram_init(void) } #endif +#ifdef CONFIG_ARCH_OMAP4 +int __init omap44xx_sram_init(void) +{ + printk(KERN_ERR "FIXME: %s not implemented\n", __func__); + + return -ENODEV; +} +#else +static inline int omap44xx_sram_init(void) +{ + return 0; +} +#endif + int __init omap_sram_init(void) { omap_detect_sram(); @@ -451,7 +465,7 @@ int __init omap_sram_init(void) else if (cpu_is_omap34xx()) omap34xx_sram_init(); else if (cpu_is_omap44xx()) - omap34xx_sram_init(); /* FIXME: */ + omap44xx_sram_init(); return 0; } diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 7e319d65ec57..f34f1dbeb577 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -209,4 +209,20 @@ config SERIO_ALTERA_PS2 To compile this driver as a module, choose M here: the module will be called altera_ps2. +config SERIO_AMS_DELTA + tristate "Amstrad Delta (E3) mailboard support" + depends on MACH_AMS_DELTA + default y + select AMS_DELTA_FIQ + ---help--- + Say Y here if you have an E3 and want to use its mailboard, + or any standard AT keyboard connected to the mailboard port. + + When used for the E3 mailboard, a non-standard key table + must be loaded from userspace, possibly using udev extras + provided keymap helper utility. + + To compile this driver as a module, choose M here; + the module will be called ams_delta_serio. + endif diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile index bf945f789d05..84c80bf7185e 100644 --- a/drivers/input/serio/Makefile +++ b/drivers/input/serio/Makefile @@ -21,5 +21,6 @@ obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o obj-$(CONFIG_SERIO_LIBPS2) += libps2.o obj-$(CONFIG_SERIO_RAW) += serio_raw.o +obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o obj-$(CONFIG_SERIO_ALTERA_PS2) += altera_ps2.o diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c new file mode 100644 index 000000000000..8f1770e1e08b --- /dev/null +++ b/drivers/input/serio/ams_delta_serio.c @@ -0,0 +1,177 @@ +/* + * Amstrad E3 (Delta) keyboard port driver + * + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Thanks to Cliff Lawson for his help + * + * The Amstrad Delta keyboard (aka mailboard) uses normal PC-AT style serial + * transmission. The keyboard port is formed of two GPIO lines, for clock + * and data. Due to strict timing requirements of the interface, + * the serial data stream is read and processed by a FIQ handler. + * The resulting words are fetched by this driver from a circular buffer. + * + * Standard AT keyboard driver (atkbd) is used for handling the keyboard data. + * However, when used with the E3 mailboard that producecs non-standard + * scancodes, a custom key table must be prepared and loaded from userspace. + */ +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/serio.h> +#include <linux/slab.h> + +#include <asm/mach-types.h> +#include <plat/board-ams-delta.h> + +#include <mach/ams-delta-fiq.h> + +MODULE_AUTHOR("Matt Callow"); +MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver"); +MODULE_LICENSE("GPL"); + +static struct serio *ams_delta_serio; + +static int check_data(int data) +{ + int i, parity = 0; + + /* check valid stop bit */ + if (!(data & 0x400)) { + dev_warn(&ams_delta_serio->dev, + "invalid stop bit, data=0x%X\n", + data); + return SERIO_FRAME; + } + /* calculate the parity */ + for (i = 1; i < 10; i++) { + if (data & (1 << i)) + parity++; + } + /* it should be odd */ + if (!(parity & 0x01)) { + dev_warn(&ams_delta_serio->dev, + "paritiy check failed, data=0x%X parity=0x%X\n", + data, parity); + return SERIO_PARITY; + } + return 0; +} + +static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) +{ + int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF]; + int data, dfl; + u8 scancode; + + fiq_buffer[FIQ_IRQ_PEND] = 0; + + /* + * Read data from the circular buffer, check it + * and then pass it on the serio + */ + while (fiq_buffer[FIQ_KEYS_CNT] > 0) { + + data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++]; + fiq_buffer[FIQ_KEYS_CNT]--; + if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN]) + fiq_buffer[FIQ_HEAD_OFFSET] = 0; + + dfl = check_data(data); + scancode = (u8) (data >> 1) & 0xFF; + serio_interrupt(ams_delta_serio, scancode, dfl); + } + return IRQ_HANDLED; +} + +static int ams_delta_serio_open(struct serio *serio) +{ + /* enable keyboard */ + ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, + AMD_DELTA_LATCH2_KEYBRD_PWR); + + return 0; +} + +static void ams_delta_serio_close(struct serio *serio) +{ + /* disable keyboard */ + ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0); +} + +static int __init ams_delta_serio_init(void) +{ + int err; + + if (!machine_is_ams_delta()) + return -ENODEV; + + ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!ams_delta_serio) + return -ENOMEM; + + ams_delta_serio->id.type = SERIO_8042; + ams_delta_serio->open = ams_delta_serio_open; + ams_delta_serio->close = ams_delta_serio_close; + strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter", + sizeof(ams_delta_serio->name)); + strlcpy(ams_delta_serio->phys, "GPIO/serio0", + sizeof(ams_delta_serio->phys)); + + err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data"); + if (err) { + pr_err("ams_delta_serio: Couldn't request gpio pin for data\n"); + goto serio; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); + + err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock"); + if (err) { + pr_err("ams_delta_serio: couldn't request gpio pin for clock\n"); + goto gpio_data; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); + + err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), + ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING, + "ams-delta-serio", 0); + if (err < 0) { + pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n", + gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); + goto gpio_clk; + } + /* + * Since GPIO register handling for keyboard clock pin is performed + * at FIQ level, switch back from edge to simple interrupt handler + * to avoid bad interaction. + */ + set_irq_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), + handle_simple_irq); + + serio_register_port(ams_delta_serio); + dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name); + + return 0; +gpio_clk: + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); +gpio_data: + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); +serio: + kfree(ams_delta_serio); + return err; +} +module_init(ams_delta_serio_init); + +static void __exit ams_delta_serio_exit(void) +{ + serio_unregister_port(ams_delta_serio); + free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); + kfree(ams_delta_serio); +} +module_exit(ams_delta_serio_exit); |