diff options
| -rw-r--r-- | drivers/scsi/ipr.c | 192 |
1 files changed, 96 insertions, 96 deletions
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index b502c831cc5e..e1d24ddd8811 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -164,7 +164,7 @@ MODULE_VERSION(IPR_DRIVER_VERSION); /* A constant array of IOASCs/URCs/Error Messages */ static const struct ipr_error_table_t ipr_error_table[] = { - {0x00000000, 1, 1, + {0x00000000, 1, IPR_DEFAULT_LOG_LEVEL, "8155: An unknown error was received"}, {0x00330000, 0, 0, "Soft underlength error"}, @@ -172,37 +172,37 @@ struct ipr_error_table_t ipr_error_table[] = { "Command to be cancelled not found"}, {0x00808000, 0, 0, "Qualified success"}, - {0x01080000, 1, 1, + {0x01080000, 1, IPR_DEFAULT_LOG_LEVEL, "FFFE: Soft device bus error recovered by the IOA"}, - {0x01088100, 0, 1, + {0x01088100, 0, IPR_DEFAULT_LOG_LEVEL, "4101: Soft device bus fabric error"}, - {0x01170600, 0, 1, + {0x01170600, 0, IPR_DEFAULT_LOG_LEVEL, "FFF9: Device sector reassign successful"}, - {0x01170900, 0, 1, + {0x01170900, 0, IPR_DEFAULT_LOG_LEVEL, "FFF7: Media error recovered by device rewrite procedures"}, - {0x01180200, 0, 1, + {0x01180200, 0, IPR_DEFAULT_LOG_LEVEL, "7001: IOA sector reassignment successful"}, - {0x01180500, 0, 1, + {0x01180500, 0, IPR_DEFAULT_LOG_LEVEL, "FFF9: Soft media error. Sector reassignment recommended"}, - {0x01180600, 0, 1, + {0x01180600, 0, IPR_DEFAULT_LOG_LEVEL, "FFF7: Media error recovered by IOA rewrite procedures"}, - {0x01418000, 0, 1, + {0x01418000, 0, IPR_DEFAULT_LOG_LEVEL, "FF3D: Soft PCI bus error recovered by the IOA"}, - {0x01440000, 1, 1, + {0x01440000, 1, IPR_DEFAULT_LOG_LEVEL, "FFF6: Device hardware error recovered by the IOA"}, - {0x01448100, 0, 1, + {0x01448100, 0, IPR_DEFAULT_LOG_LEVEL, "FFF6: Device hardware error recovered by the device"}, - {0x01448200, 1, 1, + {0x01448200, 1, IPR_DEFAULT_LOG_LEVEL, "FF3D: Soft IOA error recovered by the IOA"}, - {0x01448300, 0, 1, + {0x01448300, 0, IPR_DEFAULT_LOG_LEVEL, "FFFA: Undefined device response recovered by the IOA"}, - {0x014A0000, 1, 1, + {0x014A0000, 1, IPR_DEFAULT_LOG_LEVEL, "FFF6: Device bus error, message or command phase"}, - {0x014A8000, 0, 1, + {0x014A8000, 0, IPR_DEFAULT_LOG_LEVEL, "FFFE: Task Management Function failed"}, - {0x015D0000, 0, 1, + {0x015D0000, 0, IPR_DEFAULT_LOG_LEVEL, "FFF6: Failure prediction threshold exceeded"}, - {0x015D9200, 0, 1, + {0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL, "8009: Impending cache battery pack failure"}, {0x02040400, 0, 0, "34FF: Disk device format in progress"}, @@ -212,85 +212,85 @@ struct ipr_error_table_t ipr_error_table[] = { "No ready, IOA shutdown"}, {0x025A0000, 0, 0, "Not ready, IOA has been shutdown"}, - {0x02670100, 0, 1, + {0x02670100, 0, IPR_DEFAULT_LOG_LEVEL, "3020: Storage subsystem configuration error"}, {0x03110B00, 0, 0, "FFF5: Medium error, data unreadable, recommend reassign"}, {0x03110C00, 0, 0, "7000: Medium error, data unreadable, do not reassign"}, - {0x03310000, 0, 1, + {0x03310000, 0, IPR_DEFAULT_LOG_LEVEL, "FFF3: Disk media format bad"}, - {0x04050000, 0, 1, + {0x04050000, 0, IPR_DEFAULT_LOG_LEVEL, "3002: Addressed device failed to respond to selection"}, - {0x04080000, 1, 1, + {0x04080000, 1, IPR_DEFAULT_LOG_LEVEL, "3100: Device bus error"}, - {0x04080100, 0, 1, + {0x04080100, 0, IPR_DEFAULT_LOG_LEVEL, "3109: IOA timed out a device command"}, {0x04088000, 0, 0, "3120: SCSI bus is not operational"}, - {0x04088100, 0, 1, + {0x04088100, 0, IPR_DEFAULT_LOG_LEVEL, "4100: Hard device bus fabric error"}, - {0x04118000, 0, 1, + {0x04118000, 0, IPR_DEFAULT_LOG_LEVEL, "9000: IOA reserved area data check"}, - {0x04118100, 0, 1, + {0x04118100, 0, IPR_DEFAULT_LOG_LEVEL, "9001: IOA reserved area invalid data pattern"}, - {0x04118200, 0, 1, + {0x04118200, 0, IPR_DEFAULT_LOG_LEVEL, "9002: IOA reserved area LRC error"}, - {0x04320000, 0, 1, + {0x04320000, 0, IPR_DEFAULT_LOG_LEVEL, "102E: Out of alternate sectors for disk storage"}, - {0x04330000, 1, 1, + {0x04330000, 1, IPR_DEFAULT_LOG_LEVEL, "FFF4: Data transfer underlength error"}, - {0x04338000, 1, 1, + {0x04338000, 1, IPR_DEFAULT_LOG_LEVEL, "FFF4: Data transfer overlength error"}, - {0x043E0100, 0, 1, + {0x043E0100, 0, IPR_DEFAULT_LOG_LEVEL, "3400: Logical unit failure"}, - {0x04408500, 0, 1, + {0x04408500, 0, IPR_DEFAULT_LOG_LEVEL, "FFF4: Device microcode is corrupt"}, - {0x04418000, 1, 1, + {0x04418000, 1, IPR_DEFAULT_LOG_LEVEL, "8150: PCI bus error"}, {0x04430000, 1, 0, "Unsupported device bus message received"}, - {0x04440000, 1, 1, + {0x04440000, 1, IPR_DEFAULT_LOG_LEVEL, "FFF4: Disk device problem"}, - {0x04448200, 1, 1, + {0x04448200, 1, IPR_DEFAULT_LOG_LEVEL, "8150: Permanent IOA failure"}, - {0x04448300, 0, 1, + {0x04448300, 0, IPR_DEFAULT_LOG_LEVEL, "3010: Disk device returned wrong response to IOA"}, - {0x04448400, 0, 1, + {0x04448400, 0, IPR_DEFAULT_LOG_LEVEL, "8151: IOA microcode error"}, {0x04448500, 0, 0, "Device bus status error"}, - {0x04448600, 0, 1, + {0x04448600, 0, IPR_DEFAULT_LOG_LEVEL, "8157: IOA error requiring IOA reset to recover"}, {0x04448700, 0, 0, "ATA device status error"}, {0x04490000, 0, 0, "Message reject received from the device"}, - {0x04449200, 0, 1, + {0x04449200, 0, IPR_DEFAULT_LOG_LEVEL, "8008: A permanent cache battery pack failure occurred"}, - {0x0444A000, 0, 1, + {0x0444A000, 0, IPR_DEFAULT_LOG_LEVEL, "9090: Disk unit has been modified after the last known status"}, - {0x0444A200, 0, 1, + {0x0444A200, 0, IPR_DEFAULT_LOG_LEVEL, "9081: IOA detected device error"}, - {0x0444A300, 0, 1, + {0x0444A300, 0, IPR_DEFAULT_LOG_LEVEL, "9082: IOA detected device error"}, - {0x044A0000, 1, 1, + {0x044A0000, 1, IPR_DEFAULT_LOG_LEVEL, "3110: Device bus error, message or command phase"}, - {0x044A8000, 1, 1, + {0x044A8000, 1, IPR_DEFAULT_LOG_LEVEL, "3110: SAS Command / Task Management Function failed"}, - {0x04670400, 0, 1, + {0x04670400, 0, IPR_DEFAULT_LOG_LEVEL, "9091: Incorrect hardware configuration change has been detected"}, - {0x04678000, 0, 1, + {0x04678000, 0, IPR_DEFAULT_LOG_LEVEL, "9073: Invalid multi-adapter configuration"}, - {0x04678100, 0, 1, + {0x04678100, 0, IPR_DEFAULT_LOG_LEVEL, "4010: Incorrect connection between cascaded expanders"}, - {0x04678200, 0, 1, + {0x04678200, 0, IPR_DEFAULT_LOG_LEVEL, "4020: Connections exceed IOA design limits"}, - {0x04678300, 0, 1, + {0x04678300, 0, IPR_DEFAULT_LOG_LEVEL, "4030: Incorrect multipath connection"}, - {0x04679000, 0, 1, + {0x04679000, 0, IPR_DEFAULT_LOG_LEVEL, "4110: Unsupported enclosure function"}, - {0x046E0000, 0, 1, + {0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL, "FFF4: Command to logical unit failed"}, {0x05240000, 1, 0, "Illegal request, invalid request type or request packet"}, @@ -310,101 +310,101 @@ struct ipr_error_table_t ipr_error_table[] = { "Illegal request, command sequence error"}, {0x052C8000, 1, 0, "Illegal request, dual adapter support not enabled"}, - {0x06040500, 0, 1, + {0x06040500, 0, IPR_DEFAULT_LOG_LEVEL, "9031: Array protection temporarily suspended, protection resuming"}, - {0x06040600, 0, 1, + {0x06040600, 0, IPR_DEFAULT_LOG_LEVEL, "9040: Array protection temporarily suspended, protection resuming"}, - {0x06288000, 0, 1, + {0x06288000, 0, IPR_DEFAULT_LOG_LEVEL, "3140: Device bus not ready to ready transition"}, - {0x06290000, 0, 1, + {0x06290000, 0, IPR_DEFAULT_LOG_LEVEL, "FFFB: SCSI bus was reset"}, {0x06290500, 0, 0, "FFFE: SCSI bus transition to single ended"}, {0x06290600, 0, 0, "FFFE: SCSI bus transition to LVD"}, - {0x06298000, 0, 1, + {0x06298000, 0, IPR_DEFAULT_LOG_LEVEL, "FFFB: SCSI bus was reset by another initiator"}, - {0x063F0300, 0, 1, + {0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL, "3029: A device replacement has occurred"}, - {0x064C8000, 0, 1, + {0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL, "9051: IOA cache data exists for a missing or failed device"}, - {0x064C8100, 0, 1, + {0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL, "9055: Auxiliary cache IOA contains cache data needed by the primary IOA"}, - {0x06670100, 0, 1, + {0x06670100, 0, IPR_DEFAULT_LOG_LEVEL, "9025: Disk unit is not supported at its physical location"}, - {0x06670600, 0, 1, + {0x06670600, 0, IPR_DEFAULT_LOG_LEVEL, "3020: IOA detected a SCSI bus configuration error"}, - {0x06678000, 0, 1, + {0x06678000, 0, IPR_DEFAULT_LOG_LEVEL, "3150: SCSI bus configuration error"}, - {0x06678100, 0, 1, + {0x06678100, 0, IPR_DEFAULT_LOG_LEVEL, "9074: Asymmetric advanced function disk configuration"}, - {0x06678300, 0, 1, + {0x06678300, 0, IPR_DEFAULT_LOG_LEVEL, "4040: Incomplete multipath connection between IOA and enclosure"}, - {0x06678400, 0, 1, + {0x06678400, 0, IPR_DEFAULT_LOG_LEVEL, "4041: Incomplete multipath connection between enclosure and device"}, - {0x06678500, 0, 1, + {0x06678500, 0, IPR_DEFAULT_LOG_LEVEL, "9075: Incomplete multipath connection between IOA and remote IOA"}, - {0x06678600, 0, 1, + {0x06678600, 0, IPR_DEFAULT_LOG_LEVEL, "9076: Configuration error, missing remote IOA"}, - {0x06679100, 0, 1, + {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL, "4050: Enclosure does not support a required multipath function"}, - {0x06690200, 0, 1, + {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL, "9041: Array protection temporarily suspended"}, - {0x06698200, 0, 1, + {0x06698200, 0, IPR_DEFAULT_LOG_LEVEL, "9042: Corrupt array parity detected on specified device"}, - {0x066B0200, 0, 1, + {0x066B0200, 0, IPR_DEFAULT_LOG_LEVEL, "9030: Array no longer protected due to missing or failed disk unit"}, - {0x066B8000, 0, 1, + {0x066B8000, 0, IPR_DEFAULT_LOG_LEVEL, "9071: Link operational transition"}, - {0x066B8100, 0, 1, + {0x066B8100, 0, IPR_DEFAULT_LOG_LEVEL, "9072: Link not operational transition"}, - {0x066B8200, 0, 1, + {0x066B8200, 0, IPR_DEFAULT_LOG_LEVEL, "9032: Array exposed but still protected"}, - {0x066B9100, 0, 1, + {0x066B9100, 0, IPR_DEFAULT_LOG_LEVEL, "4061: Multipath redundancy level got better"}, - {0x066B9200, 0, 1, + {0x066B9200, 0, IPR_DEFAULT_LOG_LEVEL, "4060: Multipath redundancy level got worse"}, {0x07270000, 0, 0, "Failure due to other device"}, - {0x07278000, 0, 1, + {0x07278000, 0, IPR_DEFAULT_LOG_LEVEL, "9008: IOA does not support functions expected by devices"}, - {0x07278100, 0, 1, + {0x07278100, 0, IPR_DEFAULT_LOG_LEVEL, "9010: Cache data associated with attached devices cannot be found"}, - {0x07278200, 0, 1, + {0x07278200, 0, IPR_DEFAULT_LOG_LEVEL, "9011: Cache data belongs to devices other than those attached"}, - {0x07278400, 0, 1, + {0x07278400, 0, IPR_DEFAULT_LOG_LEVEL, "9020: Array missing 2 or more devices with only 1 device present"}, - {0x07278500, 0, 1, + {0x07278500, 0, IPR_DEFAULT_LOG_LEVEL, "9021: Array missing 2 or more devices with 2 or more devices present"}, - {0x07278600, 0, 1, + {0x07278600, 0, IPR_DEFAULT_LOG_LEVEL, "9022: Exposed array is missing a required device"}, - {0x07278700, 0, 1, + {0x07278700, 0, IPR_DEFAULT_LOG_LEVEL, "9023: Array member(s) not at required physical locations"}, - {0x07278800, 0, 1, + {0x07278800, 0, IPR_DEFAULT_LOG_LEVEL, "9024: Array not functional due to present hardware configuration"}, - {0x07278900, 0, 1, + {0x07278900, 0, IPR_DEFAULT_LOG_LEVEL, "9026: Array not functional due to present hardware configuration"}, - {0x07278A00, 0, 1, + {0x07278A00, 0, IPR_DEFAULT_LOG_LEVEL, "9027: Array is missing a device and parity is out of sync"}, - {0x07278B00, 0, 1, + {0x07278B00, 0, IPR_DEFAULT_LOG_LEVEL, "9028: Maximum number of arrays already exist"}, - {0x07278C00, 0, 1, + {0x07278C00, 0, IPR_DEFAULT_LOG_LEVEL, "9050: Required cache data cannot be located for a disk unit"}, - {0x07278D00, 0, 1, + {0x07278D00, 0, IPR_DEFAULT_LOG_LEVEL, "9052: Cache data exists for a device that has been modified"}, - {0x07278F00, 0, 1, + {0x07278F00, 0, IPR_DEFAULT_LOG_LEVEL, "9054: IOA resources not available due to previous problems"}, - {0x07279100, 0, 1, + {0x07279100, 0, IPR_DEFAULT_LOG_LEVEL, "9092: Disk unit requires initialization before use"}, - {0x07279200, 0, 1, + {0x07279200, 0, IPR_DEFAULT_LOG_LEVEL, "9029: Incorrect hardware configuration change has been detected"}, - {0x07279600, 0, 1, + {0x07279600, 0, IPR_DEFAULT_LOG_LEVEL, "9060: One or more disk pairs are missing from an array"}, - {0x07279700, 0, 1, + {0x07279700, 0, IPR_DEFAULT_LOG_LEVEL, "9061: One or more disks are missing from an array"}, - {0x07279800, 0, 1, + {0x07279800, 0, IPR_DEFAULT_LOG_LEVEL, "9062: One or more disks are missing from an array"}, - {0x07279900, 0, 1, + {0x07279900, 0, IPR_DEFAULT_LOG_LEVEL, "9063: Maximum number of functional arrays has been exceeded"}, {0x0B260000, 0, 0, "Aborted command, invalid descriptor"}, @@ -1607,7 +1607,7 @@ static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg, /* Set indication we have logged an error */ ioa_cfg->errors_logged++; - if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL) + if (ioa_cfg->log_level < ipr_error_table[error_index].log_hcam) return; if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw)) hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw)); |