diff options
54 files changed, 1891 insertions, 946 deletions
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 60b82e83a084..b6722decff9d 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -15,6 +15,11 @@ config CPU_EXYNOS4210 help Enable EXYNOS4210 CPU support +config SOC_EXYNOS4212 + bool + help + Enable EXYNOS4212 SoC support + config EXYNOS4_MCT bool default y @@ -111,24 +116,11 @@ config EXYNOS4_SETUP_USB_PHY menu "EXYNOS4 Machines" +comment "EXYNOS4210 Boards" + config MACH_SMDKC210 bool "SMDKC210" - select CPU_EXYNOS4210 - select S5P_DEV_FIMD0 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_BACKLIGHT - select EXYNOS4_DEV_PD - select EXYNOS4_DEV_SYSMMU - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_SDHCI + select MACH_SMDKV310 help Machine support for Samsung SMDKC210 @@ -261,6 +253,29 @@ config MACH_ORIGEN help Machine support for ORIGEN based on Samsung EXYNOS4210 +comment "EXYNOS4212 Boards" + +config MACH_SMDK4212 + bool "SMDK4212" + select SOC_EXYNOS4212 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C3 + select S3C_DEV_I2C7 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C7 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDK4212 + endmenu comment "Configuration for HSMMC bus width" diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index cbc976701432..e19cd12d264e 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -12,8 +12,10 @@ obj- := # Core support for EXYNOS4 system -obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o +obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o +obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o +obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o @@ -25,13 +27,15 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o # machine support -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o obj-$(CONFIG_MACH_NURI) += mach-nuri.o obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o +obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4212.o + # device support obj-y += dev-audio.o diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c new file mode 100644 index 000000000000..b9d5ef670eb4 --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4210.c @@ -0,0 +1,139 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4210.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4210_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKSRC_LCD1), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKDIV_LCD1), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210), + SAVE_ITEM(S5P_CLKGATE_IP_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), +}; + +static struct clksrc_clk *sysclks[] = { + /* nothing here yet */ +}; + +static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); +} + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_sata", + .id = -1, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clksrc_mask_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, +}; + +static struct clk init_clocks_off[] = { + { + .name = "sataphy", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "sata", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4210_clock_suspend(void) +{ + s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); + + return 0; +} + +static void exynos4210_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); +} + +#else +#define exynos4210_clock_suspend NULL +#define exynos4210_clock_resume NULL +#endif + +struct syscore_ops exynos4210_clock_syscore_ops = { + .suspend = exynos4210_clock_suspend, + .resume = exynos4210_clock_resume, +}; + +void __init exynos4210_register_clocks(void) +{ + int ptr; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU; + clk_mout_mpll.reg_src.shift = 8; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4210_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c new file mode 100644 index 000000000000..77d5decb34fd --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4212.c @@ -0,0 +1,118 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4212.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4212 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4212_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), +}; + +static struct clk *clk_src_mpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clk_src_mpll_user = { + .sources = clk_src_mpll_user_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list), +}; + +static struct clksrc_clk clk_mout_mpll_user = { + .clk = { + .name = "mout_mpll_user", + }, + .sources = &clk_src_mpll_user, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 }, +}; + +static struct clksrc_clk *sysclks[] = { + &clk_mout_mpll_user, +}; + +static struct clksrc_clk clksrcs[] = { + /* nothing here yet */ +}; + +static struct clk init_clocks_off[] = { + /* nothing here yet */ +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4212_clock_suspend(void) +{ + s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); + + return 0; +} + +static void exynos4212_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); +} + +#else +#define exynos4212_clock_suspend NULL +#define exynos4212_clock_resume NULL +#endif + +struct syscore_ops exynos4212_clock_syscore_ops = { + .suspend = exynos4212_clock_suspend, + .resume = exynos4212_clock_resume, +}; + +void __init exynos4212_register_clocks(void) +{ + int ptr; + + /* usbphy1 is removed */ + clkset_group_list[4] = NULL; + + /* mout_mpll_user is used */ + clkset_group_list[6] = &clk_mout_mpll_user.clk; + clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC; + clk_mout_mpll.reg_src.shift = 12; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4212_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 13e2421ba9e6..a25c81836759 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/syscore_ops.h> #include <plat/cpu-freq.h> #include <plat/clock.h> @@ -20,26 +21,93 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/sysmmu.h> - -static struct clk clk_sclk_hdmi27m = { +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4_clock_save[] = { + SAVE_ITEM(S5P_CLKDIV_LEFTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(S5P_CLKSRC_TOP0), + SAVE_ITEM(S5P_CLKSRC_TOP1), + SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_TV), + SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_G3D), + SAVE_ITEM(S5P_CLKSRC_LCD0), + SAVE_ITEM(S5P_CLKSRC_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_FSYS), + SAVE_ITEM(S5P_CLKSRC_PERIL0), + SAVE_ITEM(S5P_CLKSRC_PERIL1), + SAVE_ITEM(S5P_CLKDIV_CAM), + SAVE_ITEM(S5P_CLKDIV_TV), + SAVE_ITEM(S5P_CLKDIV_MFC), + SAVE_ITEM(S5P_CLKDIV_G3D), + SAVE_ITEM(S5P_CLKDIV_LCD0), + SAVE_ITEM(S5P_CLKDIV_MAUDIO), + SAVE_ITEM(S5P_CLKDIV_FSYS0), + SAVE_ITEM(S5P_CLKDIV_FSYS1), + SAVE_ITEM(S5P_CLKDIV_FSYS2), + SAVE_ITEM(S5P_CLKDIV_FSYS3), + SAVE_ITEM(S5P_CLKDIV_PERIL0), + SAVE_ITEM(S5P_CLKDIV_PERIL1), + SAVE_ITEM(S5P_CLKDIV_PERIL2), + SAVE_ITEM(S5P_CLKDIV_PERIL3), + SAVE_ITEM(S5P_CLKDIV_PERIL4), + SAVE_ITEM(S5P_CLKDIV_PERIL5), + SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_CAM), + SAVE_ITEM(S5P_CLKSRC_MASK_TV), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), + SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKDIV2_RATIO), + SAVE_ITEM(S5P_CLKGATE_SCLKCAM), + SAVE_ITEM(S5P_CLKGATE_IP_CAM), + SAVE_ITEM(S5P_CLKGATE_IP_TV), + SAVE_ITEM(S5P_CLKGATE_IP_MFC), + SAVE_ITEM(S5P_CLKGATE_IP_G3D), + SAVE_ITEM(S5P_CLKGATE_IP_LCD0), + SAVE_ITEM(S5P_CLKGATE_IP_FSYS), + SAVE_ITEM(S5P_CLKGATE_IP_GPS), + SAVE_ITEM(S5P_CLKGATE_IP_PERIL), + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKSRC_MASK_DMC), + SAVE_ITEM(S5P_CLKSRC_DMC), + SAVE_ITEM(S5P_CLKDIV_DMC0), + SAVE_ITEM(S5P_CLKDIV_DMC1), + SAVE_ITEM(S5P_CLKGATE_IP_DMC), + SAVE_ITEM(S5P_CLKSRC_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), + SAVE_ITEM(S5P_CLKGATE_SCLKCPU), + SAVE_ITEM(S5P_CLKGATE_IP_CPU), +}; + +struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", .rate = 27000000, }; -static struct clk clk_sclk_hdmiphy = { +struct clk clk_sclk_hdmiphy = { .name = "sclk_hdmiphy", }; -static struct clk clk_sclk_usbphy0 = { +struct clk clk_sclk_usbphy0 = { .name = "sclk_usbphy0", .rate = 27000000, }; -static struct clk clk_sclk_usbphy1 = { +struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", }; @@ -63,12 +131,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); } -static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); -} - -static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); } @@ -113,12 +176,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); } -static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); } -static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); } @@ -153,7 +216,7 @@ static struct clksrc_clk clk_mout_apll = { .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, }; -static struct clksrc_clk clk_sclk_apll = { +struct clksrc_clk clk_sclk_apll = { .clk = { .name = "sclk_apll", .parent = &clk_mout_apll.clk, @@ -161,7 +224,7 @@ static struct clksrc_clk clk_sclk_apll = { .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, }; -static struct clksrc_clk clk_mout_epll = { +struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", }, @@ -169,12 +232,13 @@ static struct clksrc_clk clk_mout_epll = { .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, }; -static struct clksrc_clk clk_mout_mpll = { +struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", }, .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, + + /* reg_src will be added in each SoCs' clock */ }; static struct clk *clkset_moutcore_list[] = { @@ -244,12 +308,12 @@ static struct clksrc_clk clk_periphclk = { /* Core list of CMU_CORE side */ -static struct clk *clkset_corebus_list[] = { +struct clk *clkset_corebus_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_mout_corebus = { +struct clksrc_sources clkset_mout_corebus = { .sources = clkset_corebus_list, .nr_sources = ARRAY_SIZE(clkset_corebus_list), }; @@ -304,12 +368,12 @@ static struct clksrc_clk clk_pclk_acp = { /* Core list of CMU_TOP side */ -static struct clk *clkset_aclk_top_list[] = { +struct clk *clkset_aclk_top_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_aclk = { +struct clksrc_sources clkset_aclk = { .sources = clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), }; @@ -341,7 +405,7 @@ static struct clksrc_clk clk_aclk_160 = { .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, }; -static struct clksrc_clk clk_aclk_133 = { +struct clksrc_clk clk_aclk_133 = { .clk = { .name = "aclk_133", }, @@ -380,7 +444,7 @@ static struct clksrc_sources clkset_sclk_vpll = { .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), }; -static struct clksrc_clk clk_sclk_vpll = { +struct clksrc_clk clk_sclk_vpll = { .clk = { .name = "sclk_vpll", }, @@ -430,16 +494,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 0), }, { - .name = "fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "sataphy", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 3), - }, { .name = "hsmmc", .devname = "s3c-sdhci.0", .parent = &clk_aclk_133.clk, @@ -729,7 +783,7 @@ static struct clk init_clocks[] = { } }; -static struct clk *clkset_group_list[] = { +struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, [2] = &clk_sclk_hdmi27m, @@ -741,7 +795,7 @@ static struct clk *clkset_group_list[] = { [8] = &clk_sclk_vpll.clk, }; -static struct clksrc_sources clkset_group = { +struct clksrc_sources clkset_group = { .sources = clkset_group_list, .nr_sources = ARRAY_SIZE(clkset_group_list), }; @@ -1098,25 +1152,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clksrc_mask_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_sata", - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .enable = exynos4_clksrc_mask_peril1_ctrl, @@ -1245,7 +1280,13 @@ static int xtal_rate; static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) { - return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); + if (soc_is_exynos4210()) + return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), + pll_4508); + else if (soc_is_exynos4212()) + return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0)); + else + return 0; } static struct clk_ops exynos4_fout_apll_ops = { @@ -1320,10 +1361,10 @@ static struct clk_ops exynos4_vpll_ops = { void __init_or_cpufreq exynos4_setup_clocks(void) { struct clk *xtal_clk; - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; + unsigned long apll = 0; + unsigned long mpll = 0; + unsigned long epll = 0; + unsigned long vpll = 0; unsigned long vpllsrc; unsigned long xtal; unsigned long armclk; @@ -1347,14 +1388,29 @@ void __init_or_cpufreq exynos4_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650c); + if (soc_is_exynos4210()) { + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), + pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), + pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1), pll_4600); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1), pll_4650c); + } else if (soc_is_exynos4212()) { + apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1)); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1)); + } else { + /* nothing */ + } clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; @@ -1393,6 +1449,28 @@ static struct clk *clks[] __initdata = { &clk_sclk_usbphy1, }; +#ifdef CONFIG_PM_SLEEP +static int exynos4_clock_suspend(void) +{ + s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); + return 0; +} + +static void exynos4_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); +} + +#else +#define exynos4_clock_suspend NULL +#define exynos4_clock_resume NULL +#endif + +struct syscore_ops exynos4_clock_syscore_ops = { + .suspend = exynos4_clock_suspend, + .resume = exynos4_clock_resume, +}; + void __init exynos4_register_clocks(void) { int ptr; @@ -1411,6 +1489,7 @@ void __init exynos4_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + register_syscore_ops(&exynos4_clock_syscore_ops); s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 62e46e1b0b82..2aa3df003683 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -45,11 +45,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -122,6 +117,24 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; +static struct map_desc exynos4_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4_iodesc1[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + static void exynos4_idle(void) { if (!need_resched()) @@ -144,6 +157,11 @@ void __init exynos4_map_io(void) { iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0)); + else + iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -172,6 +190,12 @@ void __init exynos4_init_clocks(int xtal) s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); + + if (soc_is_exynos4210()) + exynos4210_register_clocks(); + else if (soc_is_exynos4212()) + exynos4212_register_clocks(); + exynos4_register_clocks(); exynos4_setup_clocks(); } @@ -225,7 +249,11 @@ static int __init exynos4_l2x0_cache_init(void) { /* TAG, Data Latency Control: 2cycle */ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + + if (soc_is_exynos4210()) + __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + else if (soc_is_exynos4212()) + __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); /* L2X0 Prefetch Control */ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h new file mode 100644 index 000000000000..a07fcbf55251 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h @@ -0,0 +1,43 @@ +/* + * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clk clk_sclk_hdmi27m; +extern struct clk clk_sclk_usbphy0; +extern struct clk clk_sclk_usbphy1; +extern struct clk clk_sclk_hdmiphy; + +extern struct clksrc_clk clk_sclk_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_aclk_133; +extern struct clksrc_clk clk_mout_epll; +extern struct clksrc_clk clk_sclk_vpll; + +extern struct clk *clkset_corebus_list[]; +extern struct clksrc_sources clkset_mout_corebus; + +extern struct clk *clkset_aclk_top_list[]; +extern struct clksrc_sources clkset_aclk; + +extern struct clk *clkset_group_list[]; +extern struct clksrc_sources clkset_group; + +extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index d1af8563d73a..1bea7d139bb0 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -23,7 +23,8 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM 0x02020000 +#define EXYNOS4_PA_SYSRAM0 0x02025000 +#define EXYNOS4_PA_SYSRAM1 0x02020000 #define EXYNOS4_PA_FIMC0 0x11800000 #define EXYNOS4_PA_FIMC1 0x11810000 diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index d493fdb422ff..6c37ebe94829 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_REGS_CLOCK_H #define __ASM_ARCH_REGS_CLOCK_H __FILE__ +#include <plat/cpu.h> #include <mach/map.h> #define S5P_CLKREG(x) (S5P_VA_CMU + (x)) @@ -41,12 +42,20 @@ #define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) -#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) #define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) #define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) #define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) +#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) + #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) #define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) #define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) @@ -54,7 +63,6 @@ #define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) #define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) #define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) -#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) #define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) #define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) #define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) @@ -68,16 +76,6 @@ #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) #define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) -#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) -#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) -#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) -#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) -#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) -#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) -#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) -#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) -#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) - #define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) #define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) @@ -85,13 +83,20 @@ #define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) #define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) #define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) -#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C930) : \ + S5P_CLKREG(0x04930)) +#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) -#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) #define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) #define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) -#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C960) : \ + S5P_CLKREG(0x08960)) +#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960) #define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) #define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) @@ -102,11 +107,17 @@ #define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) -#define S5P_MPLL_LOCK S5P_CLKREG(0x14004) +#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14004) : \ + S5P_CLKREG(0x10008)) #define S5P_APLL_CON0 S5P_CLKREG(0x14100) #define S5P_APLL_CON1 S5P_CLKREG(0x14104) -#define S5P_MPLL_CON0 S5P_CLKREG(0x14108) -#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C) +#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14108) : \ + S5P_CLKREG(0x10108)) +#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x1410C) : \ + S5P_CLKREG(0x1010C)) #define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) #define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) @@ -183,6 +194,13 @@ #define S5P_CLKDIV_BUS_GPLR_SHIFT (4) #define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) +/* Only for EXYNOS4210 */ + +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) + /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos4/mach-smdk4212.c b/arch/arm/mach-exynos4/mach-smdk4212.c new file mode 100644 index 000000000000..3479a933a6de --- /dev/null +++ b/arch/arm/mach-exynos4/mach-smdk4212.c @@ -0,0 +1,292 @@ +/* + * linux/arch/arm/mach-exynos4/mach-smdk4212.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/mfd/max8997.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/pwm_backlight.h> +#include <linux/regulator/machine.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/backlight.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/exynos4.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> +#include <plat/keypad.h> +#include <plat/regs-serial.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDK4212_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK4212_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK4212_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdk4212_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata smdk4212_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk4212_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply max8997_buck1 = + REGULATOR_SUPPLY("vdd_arm", NULL); + +static struct regulator_consumer_supply max8997_buck2 = + REGULATOR_SUPPLY("vdd_int", NULL); + +static struct regulator_consumer_supply max8997_buck3 = + REGULATOR_SUPPLY("vdd_g3d", NULL); + +static struct regulator_init_data max8997_buck1_data = { + .constraints = { + .name = "VDD_ARM_SMDK4212", + .min_uV = 925000, + .max_uV = 1350000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck1, +}; + +static struct regulator_init_data max8997_buck2_data = { + .constraints = { + .name = "VDD_INT_SMDK4212", + .min_uV = 950000, + .max_uV = 1150000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck2, +}; + +static struct regulator_init_data max8997_buck3_data = { + .constraints = { + .name = "VDD_G3D_SMDK4212", + .min_uV = 950000, + .max_uV = 1150000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck3, +}; + +static struct max8997_regulator_data smdk4212_max8997_regulators[] = { + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, +}; + +static struct max8997_platform_data smdk4212_max8997_pdata = { + .num_regulators = ARRAY_SIZE(smdk4212_max8997_regulators), + .regulators = smdk4212_max8997_regulators, + + .buck1_voltage[0] = 1100000, /* 1.1V */ + .buck1_voltage[1] = 1100000, /* 1.1V */ + .buck1_voltage[2] = 1100000, /* 1.1V */ + .buck1_voltage[3] = 1100000, /* 1.1V */ + .buck1_voltage[4] = 1100000, /* 1.1V */ + .buck1_voltage[5] = 1100000, /* 1.1V */ + .buck1_voltage[6] = 1000000, /* 1.0V */ + .buck1_voltage[7] = 950000, /* 0.95V */ + + .buck2_voltage[0] = 1100000, /* 1.1V */ + .buck2_voltage[1] = 1000000, /* 1.0V */ + .buck2_voltage[2] = 950000, /* 0.95V */ + .buck2_voltage[3] = 900000, /* 0.9V */ + .buck2_voltage[4] = 1100000, /* 1.1V */ + .buck2_voltage[5] = 1000000, /* 1.0V */ + .buck2_voltage[6] = 950000, /* 0.95V */ + .buck2_voltage[7] = 900000, /* 0.9V */ + + .buck5_voltage[0] = 1100000, /* 1.1V */ + .buck5_voltage[1] = 1100000, /* 1.1V */ + .buck5_voltage[2] = 1100000, /* 1.1V */ + .buck5_voltage[3] = 1100000, /* 1.1V */ + .buck5_voltage[4] = 1100000, /* 1.1V */ + .buck5_voltage[5] = 1100000, /* 1.1V */ + .buck5_voltage[6] = 1100000, /* 1.1V */ + .buck5_voltage[7] = 1100000, /* 1.1V */ +}; + +static struct i2c_board_info smdk4212_i2c_devs0[] __initdata = { + { + I2C_BOARD_INFO("max8997", 0x66), + .platform_data = &smdk4212_max8997_pdata, + } +}; + +static struct i2c_board_info smdk4212_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("wm8994", 0x1a), } +}; + +static struct i2c_board_info smdk4212_i2c_devs3[] __initdata = { + /* nothing here yet */ +}; + +static struct i2c_board_info smdk4212_i2c_devs7[] __initdata = { + /* nothing here yet */ +}; + +static struct samsung_bl_gpio_info smdk4212_bl_gpio_info = { + .no = EXYNOS4_GPD0(1), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk4212_bl_data = { + .pwm_id = 1, + .pwm_period_ns = 1000, +}; + +static uint32_t smdk4212_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B), + KEY(1, 3, KEY_E), KEY(1, 4, KEY_C) +}; + +static struct matrix_keymap_data smdk4212_keymap_data __initdata = { + .keymap = smdk4212_keymap, + .keymap_size = ARRAY_SIZE(smdk4212_keymap), +}; + +static struct samsung_keypad_platdata smdk4212_keypad_data __initdata = { + .keymap_data = &smdk4212_keymap_data, + .rows = 2, + .cols = 5, +}; + +static struct platform_device *smdk4212_devices[] __initdata = { + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c3, + &s3c_device_i2c7, + &s3c_device_rtc, + &s3c_device_wdt, + &samsung_device_keypad, +}; + +static void __init smdk4212_map_io(void) +{ + clk_xusbxti.rate = 24000000; + + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(clk_xusbxti.rate); + s3c24xx_init_uarts(smdk4212_uartcfgs, ARRAY_SIZE(smdk4212_uartcfgs)); +} + +static void __init smdk4212_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, smdk4212_i2c_devs0, + ARRAY_SIZE(smdk4212_i2c_devs0)); + + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, smdk4212_i2c_devs1, + ARRAY_SIZE(smdk4212_i2c_devs1)); + + s3c_i2c3_set_platdata(NULL); + i2c_register_board_info(3, smdk4212_i2c_devs3, + ARRAY_SIZE(smdk4212_i2c_devs3)); + + s3c_i2c7_set_platdata(NULL); + i2c_register_board_info(7, smdk4212_i2c_devs7, + ARRAY_SIZE(smdk4212_i2c_devs7)); + + samsung_bl_set(&smdk4212_bl_gpio_info, &smdk4212_bl_data); + + samsung_keypad_set_platdata(&smdk4212_keypad_data); + + s3c_sdhci2_set_platdata(&smdk4212_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdk4212_hsmmc3_pdata); + + platform_add_devices(smdk4212_devices, ARRAY_SIZE(smdk4212_devices)); +} + +MACHINE_START(SMDK4212, "SMDK4212") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdk4212_map_io, + .init_machine = smdk4212_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c deleted file mode 100644 index a7c65e05c1eb..000000000000 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ /dev/null @@ -1,309 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-smdkc210.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/lcd.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/smsc911x.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/pwm_backlight.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> - -#include <plat/regs-serial.h> -#include <plat/regs-srom.h> -#include <plat/regs-fb-v4.h> -#include <plat/exynos4.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/sdhci.h> -#include <plat/iic.h> -#include <plat/pd.h> -#include <plat/gpio-cfg.h> -#include <plat/backlight.h> - -#include <mach/map.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - /* fire nRESET on power up */ - gpio_request(EXYNOS4_GPX0(6), "GPX0"); - - gpio_direction_output(EXYNOS4_GPX0(6), 1); - mdelay(100); - - gpio_set_value(EXYNOS4_GPX0(6), 0); - mdelay(10); - - gpio_set_value(EXYNOS4_GPX0(6), 1); - mdelay(10); - - gpio_free(EXYNOS4_GPX0(6)); - } else { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - } -} - -static struct plat_lcd_data smdkc210_lcd_lte480wv_data = { - .set_power = lcd_lte480wv_set_power, -}; - -static struct platform_device smdkc210_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s5p_device_fimd0.dev, - .dev.platform_data = &smdkc210_lcd_lte480wv_data, -}; - -static struct s3c_fb_pd_win smdkc210_fb_win0 = { - .win_mode = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 24, -}; - -static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = { - .win[0] = &smdkc210_fb_win0, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; - -static struct resource smdkc210_smsc911x_resources[] = { - [0] = { - .start = EXYNOS4_PA_SROM_BANK(1), - .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT(5), - .end = IRQ_EINT(5), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device smdkc210_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources), - .resource = smdkc210_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - {I2C_BOARD_INFO("wm8994", 0x1a),}, -}; - -static struct platform_device *smdkc210_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c1, - &s3c_device_rtc, - &s3c_device_wdt, - &exynos4_device_ac97, - &exynos4_device_i2s0, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_G3D], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_LCD1], - &exynos4_device_pd[PD_CAM], - &exynos4_device_pd[PD_TV], - &exynos4_device_pd[PD_GPS], - &exynos4_device_sysmmu, - &samsung_asoc_dma, - &s5p_device_fimd0, - &smdkc210_lcd_lte480wv, - &smdkc210_smsc911x, -}; - -static void __init smdkc210_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = { - .no = EXYNOS4_GPD0(1), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkc210_bl_data = { - .pwm_id = 1, - .pwm_period_ns = 1000, -}; - -static void __init smdkc210_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs)); -} - -static void __init smdkc210_machine_init(void) -{ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - smdkc210_smsc911x_init(); - - s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); - - samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data); - s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata); - - platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); -} - -MACHINE_START(SMDKC210, "SMDKC210") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = exynos4_init_irq, - .map_io = smdkc210_map_io, - .init_machine = smdkc210_machine_init, - .timer = &exynos4_timer, -MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 43738c086bc0..35a763e9a659 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -9,7 +9,9 @@ */ #include <linux/serial_core.h> +#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/lcd.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/smsc911x.h> @@ -21,11 +23,14 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <video/platform_lcd.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> +#include <plat/regs-fb-v4.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> @@ -115,6 +120,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; +static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + /* fire nRESET on power up */ + gpio_request(EXYNOS4_GPX0(6), "GPX0"); + + gpio_direction_output(EXYNOS4_GPX0(6), 1); + mdelay(100); + + gpio_set_value(EXYNOS4_GPX0(6), 0); + mdelay(10); + + gpio_set_value(EXYNOS4_GPX0(6), 1); + mdelay(10); + + gpio_free(EXYNOS4_GPX0(6)); + } else { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + } +} + +static struct plat_lcd_data smdkv310_lcd_lte480wv_data = { + .set_power = lcd_lte480wv_set_power, +}; + +static struct platform_device smdkv310_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s5p_device_fimd0.dev, + .dev.platform_data = &smdkv310_lcd_lte480wv_data, +}; + +static struct s3c_fb_pd_win smdkv310_fb_win0 = { + .win_mode = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { + .win[0] = &smdkv310_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static struct resource smdkv310_smsc911x_resources[] = { [0] = { .start = EXYNOS4_PA_SROM_BANK(1), @@ -210,6 +276,8 @@ static struct platform_device *smdkv310_devices[] __initdata = { &exynos4_device_sysmmu, &samsung_asoc_dma, &samsung_asoc_idma, + &s5p_device_fimd0, + &smdkv310_lcd_lte480wv, &smdkv310_smsc911x, &exynos4_device_ahci, &s5p_device_hdmi, @@ -292,6 +360,7 @@ static void __init smdkv310_machine_init(void) samsung_keypad_set_platdata(&smdkv310_keypad_data); samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); + s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); smdkv310_ehci_init(); clk_xusbxti.rate = 24000000; @@ -310,3 +379,12 @@ MACHINE_START(SMDKV310, "SMDKV310") .timer = &exynos4_timer, .reserve = &smdkv310_reserve, MACHINE_END + +MACHINE_START(SMDKC210, "SMDKC210") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdkv310_map_io, + .init_machine = smdkv310_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index df6ef1b2f98b..a3346e36d0ae 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -30,9 +30,12 @@ #include <mach/regs-clock.h> #include <mach/regs-pmu.h> +#include <plat/cpu.h> + extern void exynos4_secondary_startup(void); -#define CPU1_BOOT_REG S5P_VA_SYSRAM +#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM5 : S5P_VA_SYSRAM) /* * control for which core is the next to come out of the secondary @@ -218,5 +221,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM); + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + CPU1_BOOT_REG); } diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 6e59c8398a49..509a435afd4b 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, - { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, @@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; +static struct sleep_save exynos4210_set_clksrc[] = { + { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, +}; + static struct sleep_save exynos4_epll_save[] = { SAVE_ITEM(S5P_EPLL_CON0), SAVE_ITEM(S5P_EPLL_CON1), @@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = { }; static struct sleep_save exynos4_core_save[] = { - /* CMU side */ - SAVE_ITEM(S5P_CLKDIV_LEFTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_CLKSRC_TOP0), - SAVE_ITEM(S5P_CLKSRC_TOP1), - SAVE_ITEM(S5P_CLKSRC_CAM), - SAVE_ITEM(S5P_CLKSRC_TV), - SAVE_ITEM(S5P_CLKSRC_MFC), - SAVE_ITEM(S5P_CLKSRC_G3D), - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKSRC_LCD0), - SAVE_ITEM(S5P_CLKSRC_LCD1), - SAVE_ITEM(S5P_CLKSRC_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_FSYS), - SAVE_ITEM(S5P_CLKSRC_PERIL0), - SAVE_ITEM(S5P_CLKSRC_PERIL1), - SAVE_ITEM(S5P_CLKDIV_CAM), - SAVE_ITEM(S5P_CLKDIV_TV), - SAVE_ITEM(S5P_CLKDIV_MFC), - SAVE_ITEM(S5P_CLKDIV_G3D), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKDIV_LCD0), - SAVE_ITEM(S5P_CLKDIV_LCD1), - SAVE_ITEM(S5P_CLKDIV_MAUDIO), - SAVE_ITEM(S5P_CLKDIV_FSYS0), - SAVE_ITEM(S5P_CLKDIV_FSYS1), - SAVE_ITEM(S5P_CLKDIV_FSYS2), - SAVE_ITEM(S5P_CLKDIV_FSYS3), - SAVE_ITEM(S5P_CLKDIV_PERIL0), - SAVE_ITEM(S5P_CLKDIV_PERIL1), - SAVE_ITEM(S5P_CLKDIV_PERIL2), - SAVE_ITEM(S5P_CLKDIV_PERIL3), - SAVE_ITEM(S5P_CLKDIV_PERIL4), - SAVE_ITEM(S5P_CLKDIV_PERIL5), - SAVE_ITEM(S5P_CLKDIV_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_CAM), - SAVE_ITEM(S5P_CLKSRC_MASK_TV), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), - SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), - SAVE_ITEM(S5P_CLKDIV2_RATIO), - SAVE_ITEM(S5P_CLKGATE_SCLKCAM), - SAVE_ITEM(S5P_CLKGATE_IP_CAM), - SAVE_ITEM(S5P_CLKGATE_IP_TV), - SAVE_ITEM(S5P_CLKGATE_IP_MFC), - SAVE_ITEM(S5P_CLKGATE_IP_G3D), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE), - SAVE_ITEM(S5P_CLKGATE_IP_LCD0), - SAVE_ITEM(S5P_CLKGATE_IP_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_FSYS), - SAVE_ITEM(S5P_CLKGATE_IP_GPS), - SAVE_ITEM(S5P_CLKGATE_IP_PERIL), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR), - SAVE_ITEM(S5P_CLKGATE_BLOCK), - SAVE_ITEM(S5P_CLKSRC_MASK_DMC), - SAVE_ITEM(S5P_CLKSRC_DMC), - SAVE_ITEM(S5P_CLKDIV_DMC0), - SAVE_ITEM(S5P_CLKDIV_DMC1), - SAVE_ITEM(S5P_CLKGATE_IP_DMC), - SAVE_ITEM(S5P_CLKSRC_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), - SAVE_ITEM(S5P_CLKGATE_SCLKCPU), - SAVE_ITEM(S5P_CLKGATE_IP_CPU), - /* GIC side */ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), @@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void) s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc)); + if (soc_is_exynos4210()) + s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc)); + } static int exynos4_pm_add(struct sys_device *sysdev) diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 0d8e043804c2..dbe43df8cfec 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -47,38 +47,26 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -90,12 +78,10 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c deleted file mode 100644 index 9664e011dae2..000000000000 --- a/arch/arm/mach-s3c2410/gpio.c +++ /dev/null @@ -1,72 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/gpio.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C24XX_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15)) - return -EINVAL; - - config &= 0xff; - - pin -= S3C2410_GPG(8); - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C24XX_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C24XX_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 425552d84b60..4cf495f813a7 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -14,9 +14,53 @@ #define __ASM_ARCH_MAP_H #include <plat/map-base.h> -#include <plat/map.h> -#define S3C2410_ADDR(x) S3C_ADDR(x) +/* + * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x4000) + +#include <plat/map-s3c.h> + +/* + * interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* UARTs */ +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + +/* Timers */ +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* Clock and Power management */ +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* Standard size definitions for peripheral blocks. */ + +#define S3C24XX_SZ_UART SZ_1M +#define S3C24XX_SZ_IIS SZ_1M +#define S3C24XX_SZ_ADC SZ_1M +#define S3C24XX_SZ_SPI SZ_1M +#define S3C24XX_SZ_SDI SZ_1M +#define S3C24XX_SZ_NAND SZ_1M +#define S3C24XX_SZ_GPIO SZ_1M /* USB host controller */ #define S3C2410_PA_USBHOST (0x49000000) @@ -75,10 +119,8 @@ /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) -#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) #define S3C2412_PA_EBI (0x48800000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) /* physical addresses of all the chip-select areas */ @@ -100,12 +142,10 @@ #define S3C24XX_PA_DMA S3C2410_PA_DMA #define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR #define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_UART S3C2410_PA_UART #define S3C24XX_PA_TIMER S3C2410_PA_TIMER #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG #define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index b4fc3ba367d6..d2a7d5ef3e67 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -50,64 +50,46 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA, - .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 3b0529f54e9c..0e73f8f9d132 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -48,38 +48,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -91,31 +79,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 3f658685ec16..fe52151d2e84 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -54,68 +54,46 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2443_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_0), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3_SRC2] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_1), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -124,27 +102,22 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2443_DMAREQSEL_I2SRX), - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2443_DMAREQSEL_I2STX), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels = MAP(S3C2443_DMAREQSEL_PCMIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels = MAP(S3C2443_DMAREQSEL_PCMOUT), - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels = MAP(S3C2443_DMAREQSEL_MICIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, }; diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 374e45e566b8..6c498f9a18c5 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -43,16 +43,16 @@ static const char name_s3c6410[] = "S3C6410"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x36400000, - .idmask = 0xfffff000, + .idcode = S3C6400_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, .init_clocks = s3c6400_init_clocks, .init_uarts = s3c6400_init_uarts, .init = s3c6400_init, .name = name_s3c6400, }, { - .idcode = 0x36410100, - .idmask = 0xffffff00, + .idcode = S3C6410_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, .init_clocks = s3c6410_init_clocks, .init_uarts = s3c6410_init_uarts, @@ -140,22 +140,14 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode; - /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); - idcode = __raw_readl(S3C_VA_SYS + 0x118); - if (!idcode) { - /* S3C6400 has the ID register in a different place, - * and needs a write before it can be read. */ - - __raw_writel(0x0, S3C_VA_SYS + 0xA1C); - idcode = __raw_readl(S3C_VA_SYS + 0xA1C); - } + /* detect cpu id */ + s3c64xx_init_cpu(); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } static __init int s3c64xx_sysdev_init(void) diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index a1f13f02c841..23a1d71e4d53 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MAP_H __FILE__ #include <plat/map-base.h> +#include <plat/map-s3c.h> /* * Post-mux Chip Select Regions Xm0CSn_ @@ -83,7 +84,6 @@ #define S3C64XX_PA_IIC1 (0x7F00F000) #define S3C64XX_PA_GPIO (0x7F008000) -#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) #define S3C64XX_SZ_GPIO SZ_4K #define S3C64XX_PA_SDRAM (0x50000000) @@ -94,16 +94,10 @@ #define S3C64XX_PA_VIC1 (0x71300000) #define S3C64XX_PA_MODEM (0x74108000) -#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) #define S3C64XX_PA_USBHOST (0x74300000) #define S3C64XX_PA_USB_HSPHY (0x7C100000) -#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) - -/* place VICs close together */ -#define VA_VIC0 (S3C_VA_IRQ + 0x00) -#define VA_VIC1 (S3C_VA_IRQ + 0x10000) /* compatibiltiy defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER @@ -119,7 +113,6 @@ #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG -#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY #define S3C_PA_RTC S3C64XX_PA_RTC #define S3C_PA_WDT S3C64XX_PA_WATCHDOG diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index ed332dd7bf4f..30afaa537fcf 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -326,9 +326,6 @@ static struct platform_device *crag6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_ohci, &s3c_device_usb_hsotg, - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_ts, &s3c_device_timer[0], &s3c64xx_device_iis0, &s3c64xx_device_iis1, diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 527f49bd1b57..8f34a3c10497 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -205,12 +205,6 @@ static struct platform_device mini6410_lcd_powerdev = { .dev.platform_data = &mini6410_lcd_power_data, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static struct platform_device *mini6410_devices[] __initdata = { &mini6410_device_eth, &s3c_device_hsmmc0, @@ -319,7 +313,7 @@ static void __init mini6410_machine_init(void) s3c_nand_set_platdata(&mini6410_nand_info); s3c_fb_set_platdata(&mini6410_lcd_pdata); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 95b04b1729e3..1f5abfae4eac 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -198,12 +198,6 @@ static struct platform_device *real6410_devices[] __initdata = { &s3c_device_ohci, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static void __init real6410_map_io(void) { u32 tmp; @@ -300,7 +294,7 @@ static void __init real6410_machine_init(void) s3c_fb_set_platdata(&real6410_lcd_pdata); s3c_nand_set_platdata(&real6410_nand_info); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index a9f3183e0290..d831c97833ba 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -619,12 +619,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { .no = S3C64XX_GPF(15), @@ -666,7 +660,7 @@ static void __init smdk6410_machine_init(void) samsung_keypad_set_platdata(&smdk6410_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index ac825e826326..1fd9c79c7dbc 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -21,6 +21,7 @@ #include <mach/regs-clock.h> #include <mach/spi-clocks.h> +#include <plat/cpu.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -185,11 +186,8 @@ struct platform_device s5p64x0_device_spi1 = { void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) { - unsigned int id; struct s3c64xx_spi_info *pd; - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0 || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) { @@ -199,7 +197,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) switch (cntrlr) { case 0: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi0_pdata; else pd = &s5p6440_spi0_pdata; @@ -207,7 +205,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) s5p64x0_device_spi0.dev.platform_data = pd; break; case 1: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi1_pdata; else pd = &s5p6440_spi1_pdata; diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index aebf3fcb1ebe..442dd4ad12da 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -32,6 +32,7 @@ #include <mach/regs-clock.h> #include <mach/dma.h> +#include <plat/cpu.h> #include <plat/devs.h> #include <plat/irqs.h> @@ -226,9 +227,7 @@ struct amba_device s5p64x0_device_pdma = { static int __init s5p64x0_dma_init(void) { - unsigned int id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - - if (id == 0x50000) + if (soc_is_s5p6450()) s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; else s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c new file mode 100644 index 000000000000..700dac6c43f3 --- /dev/null +++ b/arch/arm/mach-s5p64x0/gpiolib.c @@ -0,0 +1,508 @@ +/* linux/arch/arm/mach-s5p64x0/gpiolib.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> + +#include <plat/cpu.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +/* + * S5P6440 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * F 2 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 8 2Bit Yes 8 + * R 15 4Bit[2] Yes 8 + * + * S5P6450 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 8 4Bit Yes None + * F 2 2Bit Yes None + * G 14 4Bit[2] Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 5 4Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 11 2Bit Yes 8 + * Q 14 2Bit Yes None + * R 15 4Bit[2] Yes None + * S 8 2Bit Yes None + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long flags; + + switch (offset) { + case 6: + offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + offset -= 7; + break; + } + + s3c_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + s3c_gpio_unlock(ourchip, flags); + + return 0; +} + +static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned long flags; + unsigned con_offset = offset; + + switch (con_offset) { + case 6: + con_offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + con_offset -= 7; + break; + } + + s3c_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + s3c_gpio_unlock(ourchip, flags); + + return 0; +} + +int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift; + u32 con; + + switch (off) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + shift = (off & 7) * 4; + reg -= 4; + break; + case 6: + shift = ((off + 1) & 7) * 4; + reg -= 4; + default: + shift = ((off + 1) & 7) * 4; + break; + } + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { + { + .cfg_eint = 0, + }, { + .cfg_eint = 7, + }, { + .cfg_eint = 3, + .set_config = s5p64x0_gpio_setcfg_4bit_rbank, + }, { + .cfg_eint = 0, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + }, { + .cfg_eint = 2, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + }, { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { + { + .base = S5P64X0_GPA_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPA(0), + .ngpio = S5P6440_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S5P64X0_GPB_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPB(0), + .ngpio = S5P6440_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5P64X0_GPC_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPC(0), + .ngpio = S5P6440_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P64X0_GPG_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPG(0), + .ngpio = S5P6440_GPIO_G_NR, + .label = "GPG", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { + { + .base = S5P64X0_GPH_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPH(0), + .ngpio = S5P6440_GPIO_H_NR, + .label = "GPH", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[2], + .chip = { + .base = S5P6440_GPR(0), + .ngpio = S5P6440_GPIO_R_NR, + .label = "GPR", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { + { + .base = S5P64X0_GPF_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPF(0), + .ngpio = S5P6440_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPI(0), + .ngpio = S5P6440_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPJ(0), + .ngpio = S5P6440_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPN(0), + .ngpio = S5P6440_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPP(0), + .ngpio = S5P6440_GPIO_P_NR, + .label = "GPP", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_4bit[] = { + { + .base = S5P64X0_GPA_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPA(0), + .ngpio = S5P6450_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S5P64X0_GPB_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPB(0), + .ngpio = S5P6450_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5P64X0_GPC_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPC(0), + .ngpio = S5P6450_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P6450_GPD_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPD(0), + .ngpio = S5P6450_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5P6450_GPK_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPK(0), + .ngpio = S5P6450_GPIO_K_NR, + .label = "GPK", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = { + { + .base = S5P64X0_GPG_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPG(0), + .ngpio = S5P6450_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S5P64X0_GPH_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPH(0), + .ngpio = S5P6450_GPIO_H_NR, + .label = "GPH", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = { + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[2], + .chip = { + .base = S5P6450_GPR(0), + .ngpio = S5P6450_GPIO_R_NR, + .label = "GPR", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_2bit[] = { + { + .base = S5P64X0_GPF_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPF(0), + .ngpio = S5P6450_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6450_GPI(0), + .ngpio = S5P6450_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6450_GPJ(0), + .ngpio = S5P6450_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPN(0), + .ngpio = S5P6450_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPP(0), + .ngpio = S5P6450_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S5P6450_GPQ_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPQ(0), + .ngpio = S5P6450_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S5P6450_GPS_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPS(0), + .ngpio = S5P6450_GPIO_S_NR, + .label = "GPS", + }, + }, +}; + +void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = s3c_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = s3c_gpio_getpull_updown; + } +} + +static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input; + chip->chip.direction_output = + s5p64x0_gpiolib_rbank_4bit2_output; + s3c_gpiolib_add(chip); + } +} + +static int __init s5p64x0_gpiolib_init(void) +{ + s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, + ARRAY_SIZE(s5p64x0_gpio_cfgs)); + + if (soc_is_s5p6450()) { + samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, + ARRAY_SIZE(s5p6450_gpio_2bit)); + + samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit, + ARRAY_SIZE(s5p6450_gpio_4bit)); + + samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2, + ARRAY_SIZE(s5p6450_gpio_4bit2)); + + s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6450_gpio_rbank_4bit2)); + } else { + samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit, + ARRAY_SIZE(s5p6440_gpio_2bit)); + + samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, + ARRAY_SIZE(s5p6440_gpio_4bit)); + + samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, + ARRAY_SIZE(s5p6440_gpio_4bit2)); + + s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); + } + + return 0; +} +core_initcall(s5p64x0_gpiolib_init); diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index fe7380f5c3cd..494e1a8f6f6d 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/io.h> +#include <plat/cpu.h> #include <plat/regs-irqtype.h> #include <plat/gpio-cfg.h> @@ -67,7 +68,7 @@ static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) __raw_writel(ctrl, S5P64X0_EINT0CON0); /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ - if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000)) + if (soc_is_s5p6450()) s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); else s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 39026e9d5f3c..b0465d4e84e7 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -189,12 +189,6 @@ static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { /* To be populated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = { .no = S5P6440_GPF(15), @@ -226,7 +220,7 @@ static void s5p6440_set_lcd_interface(void) static void __init smdk6440_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6440_i2c0_data); s3c_i2c1_set_platdata(&s5p6440_i2c1_data); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 92b5de1465b7..2a69caa70afd 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -209,12 +209,6 @@ static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = { .no = S5P6450_GPF(15), @@ -246,7 +240,7 @@ static void s5p6450_set_lcd_interface(void) static void __init smdk6450_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6450_i2c0_data); s3c_i2c1_set_platdata(&s5p6450_i2c1_data); diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 227d8908aab6..0b70762ebf1a 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -203,12 +203,6 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5pc100_device_spdif, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = { .no = S5PC100_GPD(0), @@ -228,7 +222,7 @@ static void __init smdkc100_map_io(void) static void __init smdkc100_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* I2C */ s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index e2d1d9e9a498..f22c683272d3 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -14,7 +14,6 @@ config CPU_S5PV210 select SAMSUNG_DMADEV select S5P_EXT_INT select S5P_HRT - select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -171,9 +170,4 @@ config MACH_TORBRECK endmenu -config S5PV210_PM - bool - help - Power Management code common to S5PV210 - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 599a3c0e8f6c..ef7e4668d670 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,7 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o -obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o # machine support diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 5e011fc6720d..4b27bcaf676a 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -265,12 +265,6 @@ static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { /* To Be Updated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { .no = S5PV210_GPD0(3), @@ -296,7 +290,7 @@ static void __init smdkv210_machine_init(void) smdkv210_dm9000_init(); samsung_keypad_set_platdata(&smdkv210_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index c1fc6c6fac72..3c6335307fb1 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -215,19 +215,18 @@ static void s3c24xx_pm_restart(char mode, const char *cmd) void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode = 0x0; - /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); if (cpu_architecture() >= CPU_ARCH_ARMv5) { - idcode = s3c24xx_read_idcode_v5(); + samsung_cpu_id = s3c24xx_read_idcode_v5(); } else { - idcode = s3c24xx_read_idcode_v4(); + samsung_cpu_id = s3c24xx_read_idcode_v4(); } + s3c24xx_init_cpu(); arm_pm_restart = s3c24xx_pm_restart; - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h deleted file mode 100644 index bd534d32b993..000000000000 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ /dev/null @@ -1,100 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/map.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S3C24XX_MAP_H -#define __ASM_PLAT_S3C24XX_MAP_H - -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M -#define S3C_UART_OFFSET (0x4000) - -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* Standard size definitions for peripheral blocks. */ - -#define S3C24XX_SZ_IIS SZ_1M -#define S3C24XX_SZ_ADC SZ_1M -#define S3C24XX_SZ_SPI SZ_1M -#define S3C24XX_SZ_SDI SZ_1M -#define S3C24XX_SZ_NAND SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 mapping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M - - -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif - -#endif /* __ASM_PLAT_S3C24XX_MAP_H */ diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index bbc2aa7449ca..909507bae2fa 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -33,48 +33,57 @@ static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_exynos4210[] = "EXYNOS4210"; +static const char name_exynos4212[] = "EXYNOS4212"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x56440100, - .idmask = 0xfffff000, + .idcode = S5P6440_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36450000, - .idmask = 0xfffff000, + .idcode = S5P6450_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6450_map_io, .init_clocks = s5p6450_init_clocks, .init_uarts = s5p6450_init_uarts, .init = s5p64x0_init, .name = name_s5p6450, }, { - .idcode = 0x43100000, - .idmask = 0xfffff000, + .idcode = S5PC100_CPU_ID, + .idmask = S5PC100_CPU_MASK, .map_io = s5pc100_map_io, .init_clocks = s5pc100_init_clocks, .init_uarts = s5pc100_init_uarts, .init = s5pc100_init, .name = name_s5pc100, }, { - .idcode = 0x43110000, - .idmask = 0xfffff000, + .idcode = S5PV210_CPU_ID, + .idmask = S5PV210_CPU_MASK, .map_io = s5pv210_map_io, .init_clocks = s5pv210_init_clocks, .init_uarts = s5pv210_init_uarts, .init = s5pv210_init, .name = name_s5pv210, }, { - .idcode = 0x43210000, - .idmask = 0xfffe0000, + .idcode = EXYNOS4210_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos4_init, .name = name_exynos4210, + }, { + .idcode = EXYNOS4212_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4212, }, }; @@ -114,13 +123,13 @@ static struct map_desc s5p_iodesc[] __initdata = { void __init s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr) { - unsigned long idcode; - /* initialize the io descriptors we need for initialization */ iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); if (mach_desc) iotable_init(mach_desc, size); - idcode = __raw_readl(cpuid_addr); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + /* detect cpu id and rev. */ + s5p_init_cpu(cpuid_addr); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h index 907caab53dcf..f680a143e38c 100644 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ b/arch/arm/plat-s5p/include/plat/exynos4.h @@ -14,10 +14,11 @@ extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void exynos4_register_clocks(void); +extern void exynos4210_register_clocks(void); +extern void exynos4212_register_clocks(void); extern void exynos4_setup_clocks(void); -#ifdef CONFIG_CPU_EXYNOS4210 - +#ifdef CONFIG_ARCH_EXYNOS4 extern int exynos4_init(void); extern void exynos4_init_irq(void); extern void exynos4_map_io(void); diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index 8b24b366c65d..002ec9f28f18 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -12,6 +12,59 @@ * published by the Free Software Foundation. */ +#include <asm/div64.h> + +#define PLL35XX_MDIV_MASK (0x3FF) +#define PLL35XX_PDIV_MASK (0x3F) +#define PLL35XX_SDIV_MASK (0x7) +#define PLL35XX_MDIV_SHIFT (16) +#define PLL35XX_PDIV_SHIFT (8) +#define PLL35XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; + pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; + sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL36XX_KDIV_MASK (0xFFFF) +#define PLL36XX_MDIV_MASK (0x1FF) +#define PLL36XX_PDIV_MASK (0x3F) +#define PLL36XX_SDIV_MASK (0x7) +#define PLL36XX_MDIV_SHIFT (16) +#define PLL36XX_PDIV_SHIFT (8) +#define PLL36XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll36xx(unsigned long baseclk, + u32 pll_con0, u32 pll_con1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; + kdiv = pll_con1 & PLL36XX_KDIV_MASK; + + tmp = baseclk; + + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + #define PLL45XX_MDIV_MASK (0x3FF) #define PLL45XX_PDIV_MASK (0x3F) #define PLL45XX_SDIV_MASK (0x7) @@ -19,8 +72,6 @@ #define PLL45XX_PDIV_SHIFT (8) #define PLL45XX_SDIV_SHIFT (0) -#include <asm/div64.h> - enum pll45xx_type_t { pll_4500, pll_4502, @@ -81,7 +132,6 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; - kdiv = pll_con1 & PLL46XX_KDIV_MASK; if (pll_type == pll_4650c) kdiv = pll_con1 & PLL4650C_KDIV_MASK; diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 5ed2b2be0c7e..5a5435482595 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -11,7 +11,7 @@ obj- := # Objects we always build independent of SoC choice -obj-y += init.o +obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c new file mode 100644 index 000000000000..81c06d44c11e --- /dev/null +++ b/arch/arm/plat-samsung/cpu.c @@ -0,0 +1,58 @@ +/* linux/arch/arm/plat-samsung/cpu.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/system.h> + +#include <mach/map.h> +#include <plat/cpu.h> + +unsigned long samsung_cpu_id; +static unsigned int samsung_cpu_rev; + +unsigned int samsung_rev(void) +{ + return samsung_cpu_rev; +} +EXPORT_SYMBOL(samsung_rev); + +void __init s3c24xx_init_cpu(void) +{ + /* nothing here yet */ + + samsung_cpu_rev = 0; +} + +void __init s3c64xx_init_cpu(void) +{ + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); + if (!samsung_cpu_id) { + /* + * S3C6400 has the ID register in a different place, + * and needs a write before it can be read. + */ + __raw_writel(0x0, S3C_VA_SYS + 0xA1C); + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C); + } + + samsung_cpu_rev = 0; +} + +void __init s5p_init_cpu(void __iomem *cpuid_addr) +{ + samsung_cpu_id = __raw_readl(cpuid_addr); + samsung_cpu_rev = samsung_cpu_id & 0xFF; +} diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c index db7a65c7f127..06825c4276de 100644 --- a/arch/arm/plat-samsung/dev-hsmmc.c +++ b/arch/arm/plat-samsung/dev-hsmmc.c @@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc0 = { void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c index 2497321f08d7..4524ef440010 100644 --- a/arch/arm/plat-samsung/dev-hsmmc1.c +++ b/arch/arm/plat-samsung/dev-hsmmc1.c @@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc1 = { void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c index f60aedba417c..9cede9615e48 100644 --- a/arch/arm/plat-samsung/dev-hsmmc2.c +++ b/arch/arm/plat-samsung/dev-hsmmc2.c @@ -59,22 +59,5 @@ struct platform_device s3c_device_hsmmc2 = { void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c index ede776f20e62..0358ef4a8f66 100644 --- a/arch/arm/plat-samsung/dev-hsmmc3.c +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -62,22 +62,5 @@ struct platform_device s3c_device_hsmmc3 = { void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 82543f0248ac..5f3d46a9bd88 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -43,8 +43,17 @@ struct platform_device s3c_device_ts = { .resource = s3c_ts_resource, }; +static struct s3c2410_ts_mach_info default_ts_data __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) { + if (!pd) + pd = &default_ts_data; + s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts); } diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index c0a5741b23e6..1bbbbb420be7 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -1,9 +1,12 @@ /* linux/arch/arm/plat-samsung/include/plat/cpu.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Header file for S3C24XX CPU support + * Header file for Samsung CPU support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +18,100 @@ #ifndef __SAMSUNG_PLAT_CPU_H #define __SAMSUNG_PLAT_CPU_H +extern unsigned long samsung_cpu_id; + +#define S3C24XX_CPU_ID 0x32400000 +#define S3C24XX_CPU_MASK 0xFFF00000 + +#define S3C6400_CPU_ID 0x36400000 +#define S3C6410_CPU_ID 0x36410000 +#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID) +#define S3C64XX_CPU_MASK 0xFFFFF000 + +#define S5P6440_CPU_ID 0x56440000 +#define S5P6450_CPU_ID 0x36450000 +#define S5P64XX_CPU_MASK 0xFFFFF000 + +#define S5PC100_CPU_ID 0x43100000 +#define S5PC100_CPU_MASK 0xFFFFF000 + +#define S5PV210_CPU_ID 0x43110000 +#define S5PV210_CPU_MASK 0xFFFFF000 + +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define IS_SAMSUNG_CPU(name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) +IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) +IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \ + defined(CONFIG_CPU_S3C2443) +# define soc_is_s3c24xx() is_samsung_s3c24xx() +#else +# define soc_is_s3c24xx() 0 +#endif + +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) +# define soc_is_s3c64xx() is_samsung_s3c64xx() +#else +# define soc_is_s3c64xx() 0 +#endif + +#if defined(CONFIG_CPU_S5P6440) +# define soc_is_s5p6440() is_samsung_s5p6440() +#else +# define soc_is_s5p6440() 0 +#endif + +#if defined(CONFIG_CPU_S5P6450) +# define soc_is_s5p6450() is_samsung_s5p6450() +#else +# define soc_is_s5p6450() 0 +#endif + +#if defined(CONFIG_CPU_S5PC100) +# define soc_is_s5pc100() is_samsung_s5pc100() +#else +# define soc_is_s5pc100() 0 +#endif + +#if defined(CONFIG_CPU_S5PV210) +# define soc_is_s5pv210() is_samsung_s5pv210() +#else +# define soc_is_s5pv210() 0 +#endif + +#if defined(CONFIG_CPU_EXYNOS4210) +# define soc_is_exynos4210() is_samsung_exynos4210() +#else +# define soc_is_exynos4210() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212) +# define soc_is_exynos4212() is_samsung_exynos4212() +#else +# define soc_is_exynos4212() 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ @@ -55,6 +152,12 @@ extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); extern void s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr); +extern void s3c24xx_init_cpu(void); +extern void s3c64xx_init_cpu(void); +extern void s5p_init_cpu(void __iomem *cpuid_addr); + +extern unsigned int samsung_rev(void); + extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c24xx_init_clocks(int xtal); diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h index 19828296a562..1c1ed5481253 100644 --- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -18,11 +18,6 @@ extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) #define DMA_CH_NEVER (1<<30) -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - /* struct s3c24xx_dma_map * * this holds the mapping information for the channel selected @@ -31,7 +26,6 @@ struct s3c24xx_dma_addr { struct s3c24xx_dma_map { const char *name; - struct s3c24xx_dma_addr hw_addr; unsigned long channels[S3C_DMA_CHANNELS]; unsigned long channels_rx[S3C_DMA_CHANNELS]; diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h new file mode 100644 index 000000000000..7d048759b772 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -0,0 +1,84 @@ +/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_S3C_H +#define __ASM_PLAT_MAP_S3C_H __FILE__ + +#define S3C24XX_VA_IRQ S3C_VA_IRQ +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +#define S3C24XX_VA_UART S3C_VA_UART + +#define S3C24XX_VA_TIMER S3C_VA_TIMER +#define S3C24XX_VA_CLKPWR S3C_VA_SYS +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG + +#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) + +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_PA_UART S3C2410_PA_UART + +#ifndef S3C_UART_OFFSET +#define S3C_UART_OFFSET (0x400) +#endif + +/* + * GPIO ports + * + * the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 mapping. This puts it (currently) at + * 0xFA800000, which is not in the way of any current mapping + * by the base system. +*/ + +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_PA_GPIO S3C2410_PA_GPIO + +#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) + +#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) +#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) + +#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY + +/* + * ISA style IO, for each machine to sort out mappings for, + * if it implements it. We reserve two 16M regions for ISA. + */ + +#define S3C2410_ADDR(x) S3C_ADDR(x) + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + +#include <plat/map-s5p.h> + +#endif /* __ASM_PLAT_MAP_S3C_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index 36d3551173b2..c2d7bdae5891 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h +/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -40,8 +40,6 @@ #define S5P_VA_GIC_CPU S3C_ADDR(0x02810000) #define S5P_VA_GIC_DIST S3C_ADDR(0x02820000) -#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) - #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) #define VA_VIC1 VA_VIC(1) @@ -58,4 +56,6 @@ #define S3C_UART_OFFSET (0x400) #endif +#include <plat/map-s3c.h> + #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 058e09654fe8..4a6552066c7e 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -86,6 +86,13 @@ struct s3c_sdhci_platdata { struct mmc_card *card); }; +/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data + * @pd: The default platform data for this device. + * @set: Pointer to the platform data to fill in. + */ +extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set); + /** * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device. * @pd: Platform data to register to device. diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index 7cf2e1e3b20f..6de1a3825927 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <plat/devs.h> +#include <plat/sdhci.h> void __init *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev) @@ -35,3 +36,24 @@ void __init *s3c_set_platdata(void *pd, size_t pdsize, pdev->dev.platform_data = npd; return npd; } + +void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set) +{ + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + + if (pd->max_width) + set->max_width = pd->max_width; + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; + if (pd->host_caps) + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; +} |