summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/humidity/hts221.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/humidity/hts221.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/humidity/hts221.txt11
1 files changed, 10 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
index b20ab9c12080..10adeb0d703d 100644
--- a/Documentation/devicetree/bindings/iio/humidity/hts221.txt
+++ b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
@@ -5,9 +5,18 @@ Required properties:
- reg: i2c address of the sensor / spi cs line
Optional properties:
+- drive-open-drain: the interrupt/data ready line will be configured
+ as open drain, which is useful if several sensors share the same
+ interrupt line. This is a boolean property.
+ If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or
+ IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line
+ when it is not active, whereas a pull-up one is needed when interrupt
+ line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING.
+ Refer to pinctrl/pinctrl-bindings.txt for the property description.
- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
- flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING.
+ flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
+ IRQ_TYPE_EDGE_FALLING.
Refer to interrupt-controller/interrupts.txt for generic interrupt
client node bindings.