diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/marvell.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/marvell.txt | 59 |
1 files changed, 35 insertions, 24 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 1d4d0f49c9d0..60d50a2b0323 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -13,9 +13,18 @@ placed as a child node of an mdio device. The properties described here are those specific to Marvell devices. Additional required and optional properties can be found in dsa.txt. +The compatibility string is used only to find an identification register, +which is at a different MDIO base address in different switch families. +- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, + 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, + 6341, 6350, 6351, 6352 +- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: + 6190, 6190X, 6191, 6290, 6390, 6390X + Required properties: - compatible : Should be one of "marvell,mv88e6085" or - "marvell,mv88e6190" + "marvell,mv88e6190" as indicated above - reg : Address on the MII bus for the switch. Optional properties: @@ -50,14 +59,15 @@ Example: compatible = "marvell,mv88e6085"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; }; @@ -74,23 +84,24 @@ Example: compatible = "marvell,mv88e6390"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; }; - }; - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + switch1phy9: switch1phy0@9 { + reg = <9>; + }; }; }; }; |