summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/regulator-max77620.txt')
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator-max77620.txt22
1 files changed, 22 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
index b3c8ca672024..1c4bfe786736 100644
--- a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
@@ -94,6 +94,28 @@ Following are additional properties:
This is applicable if suspend state
FPS source is selected as FPS0, FPS1 or
FPS2.
+- maxim,ramp-rate-setting: integer, ramp rate(uV/us) setting to be
+ configured to the device.
+ The platform may have different ramp
+ rate than advertised ramp rate if it has
+ design variation from Maxim's
+ recommended. On this case, platform
+ specific ramp rate is used for ramp time
+ calculation and this property is used
+ for device register configurations.
+ The measured ramp rate of platform is
+ provided by the regulator-ramp-delay
+ as described in <devicetree/bindings/
+ regulator/regulator.txt>.
+ Maxim Max77620 supports following ramp
+ delay:
+ SD: 13.75mV/us, 27.5mV/us, 55mV/us
+ LDOs: 5mV/us, 100mV/us
+
+Note: If the measured ramp delay is same as advertised ramp delay then it is not
+required to provide the ramp delay with property "maxim,ramp-rate-setting". The
+ramp rate can be provided by the regulator-ramp-delay which will be used for
+ramp time calculation for voltage change as well as for device configuration.
Example:
--------