diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/ksz.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/renesas,ravb.txt | 3 | ||||
| -rw-r--r-- | Documentation/networking/ti-cpsw.txt | 11 | ||||
| -rw-r--r-- | Documentation/networking/tproxy.txt | 34 |
4 files changed, 38 insertions, 14 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index a700943218ca..ac145b885e95 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -4,7 +4,9 @@ Microchip KSZ Series Ethernet switches Required properties: - compatible: For external switch chips, compatible string must be exactly one - of: "microchip,ksz9477" + of the following: + - "microchip,ksz9477" + - "microchip,ksz9897" See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 19740d01cab0..da249b7c406c 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -16,6 +16,7 @@ Required properties: - "renesas,etheravb-rcar-gen2" as a fallback for the above R-Car Gen2 and RZ/G1 devices. + - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC. - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. - "renesas,etheravb-r8a77965" for the R8A77965 SoC. @@ -24,7 +25,7 @@ Required properties: - "renesas,etheravb-r8a77990" for the R8A77990 SoC. - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - "renesas,etheravb-rcar-gen3" as a fallback for the above - R-Car Gen3 devices. + R-Car Gen3 and RZ/G2 devices. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by diff --git a/Documentation/networking/ti-cpsw.txt b/Documentation/networking/ti-cpsw.txt index 67039205bd69..d4d4c0751a09 100644 --- a/Documentation/networking/ti-cpsw.txt +++ b/Documentation/networking/ti-cpsw.txt @@ -469,17 +469,18 @@ $ tc -g class show dev eth1 14) // Set rate for class A - 31 Mbit (tc0, txq2) using CBS Qdisc for Eth1 -// here only idle slope is important, others ignored +// here only idle slope is important, others ignored, but calculated +// for interface speed - 100Mb for eth1 port. // Set it +1 Mb for reserve (important!) -$ tc qdisc add dev eth1 parent 100:3 cbs locredit -1453 \ -hicredit 47 sendslope -969000 idleslope 31000 offload 1 +$ tc qdisc add dev eth1 parent 100:3 cbs locredit -1035 \ +hicredit 465 sendslope -69000 idleslope 31000 offload 1 net eth1: set FIFO3 bw = 31 15) // Set rate for class B - 11 Mbit (tc1, txq3) using CBS Qdisc for Eth1 // Set it +1 Mb for reserve (important!) -$ tc qdisc add dev eth1 parent 100:4 cbs locredit -1483 \ -hicredit 34 sendslope -989000 idleslope 11000 offload 1 +$ tc qdisc add dev eth1 parent 100:4 cbs locredit -1335 \ +hicredit 405 sendslope -89000 idleslope 11000 offload 1 net eth1: set FIFO2 bw = 11 16) diff --git a/Documentation/networking/tproxy.txt b/Documentation/networking/tproxy.txt index ec11429e1d42..b9a188823d9f 100644 --- a/Documentation/networking/tproxy.txt +++ b/Documentation/networking/tproxy.txt @@ -5,19 +5,28 @@ This feature adds Linux 2.2-like transparent proxy support to current kernels. To use it, enable the socket match and the TPROXY target in your kernel config. You will need policy routing too, so be sure to enable that as well. +From Linux 4.18 transparent proxy support is also available in nf_tables. 1. Making non-local sockets work ================================ The idea is that you identify packets with destination address matching a local -socket on your box, set the packet mark to a certain value, and then match on that -value using policy routing to have those packets delivered locally: +socket on your box, set the packet mark to a certain value: # iptables -t mangle -N DIVERT # iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT # iptables -t mangle -A DIVERT -j MARK --set-mark 1 # iptables -t mangle -A DIVERT -j ACCEPT +Alternatively you can do this in nft with the following commands: + +# nft add table filter +# nft add chain filter divert "{ type filter hook prerouting priority -150; }" +# nft add rule filter divert meta l4proto tcp socket transparent 1 meta mark set 1 accept + +And then match on that value using policy routing to have those packets +delivered locally: + # ip rule add fwmark 1 lookup 100 # ip route add local 0.0.0.0/0 dev lo table 100 @@ -57,17 +66,28 @@ add rules like this to the iptables ruleset above: # iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY \ --tproxy-mark 0x1/0x1 --on-port 50080 +Or the following rule to nft: + +# nft add rule filter divert tcp dport 80 tproxy to :50080 meta mark set 1 accept + Note that for this to work you'll have to modify the proxy to enable (SOL_IP, IP_TRANSPARENT) for the listening socket. +As an example implementation, tcprdr is available here: +https://git.breakpoint.cc/cgit/fw/tcprdr.git/ +This tool is written by Florian Westphal and it was used for testing during the +nf_tables implementation. -3. Iptables extensions -====================== +3. Iptables and nf_tables extensions +==================================== -To use tproxy you'll need to have the 'socket' and 'TPROXY' modules -compiled for iptables. A patched version of iptables is available -here: http://git.balabit.hu/?p=bazsi/iptables-tproxy.git +To use tproxy you'll need to have the following modules compiled for iptables: + - NETFILTER_XT_MATCH_SOCKET + - NETFILTER_XT_TARGET_TPROXY +Or the floowing modules for nf_tables: + - NFT_SOCKET + - NFT_TPROXY 4. Application support ====================== |