summaryrefslogtreecommitdiffstats
path: root/arch/arc/mm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arc/mm')
-rw-r--r--arch/arc/mm/cache.c22
-rw-r--r--arch/arc/mm/dma.c2
-rw-r--r--arch/arc/mm/fault.c2
-rw-r--r--arch/arc/mm/init.c25
4 files changed, 25 insertions, 26 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index f2701c13a66b..4135abec3fb0 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -1145,6 +1145,20 @@ noinline void __init arc_ioc_setup(void)
unsigned int ioc_base, mem_sz;
/*
+ * If IOC was already enabled (due to bootloader) it technically needs to
+ * be reconfigured with aperture base,size corresponding to Linux memory map
+ * which will certainly be different than uboot's. But disabling and
+ * reenabling IOC when DMA might be potentially active is tricky business.
+ * To avoid random memory issues later, just panic here and ask user to
+ * upgrade bootloader to one which doesn't enable IOC
+ */
+ if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT)
+ panic("IOC already enabled, please upgrade bootloader!\n");
+
+ if (!ioc_enable)
+ return;
+
+ /*
* As for today we don't support both IOC and ZONE_HIGHMEM enabled
* simultaneously. This happens because as of today IOC aperture covers
* only ZONE_NORMAL (low mem) and any dma transactions outside this
@@ -1187,8 +1201,8 @@ noinline void __init arc_ioc_setup(void)
panic("IOC Aperture start must be aligned to the size of the aperture");
write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12);
- write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
- write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+ write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT);
+ write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT);
/* Re-enable L1 dcache */
__dc_enable();
@@ -1265,7 +1279,7 @@ void __init arc_cache_init_master(void)
if (is_isa_arcv2() && l2_line_sz && !slc_enable)
arc_slc_disable();
- if (is_isa_arcv2() && ioc_enable)
+ if (is_isa_arcv2() && ioc_exists)
arc_ioc_setup();
if (is_isa_arcv2() && l2_line_sz && slc_enable) {
@@ -1280,7 +1294,7 @@ void __init arc_cache_init_master(void)
/*
* In case of IOC (say IOC+SLC case), pointers above could still be set
* but end up not being relevant as the first function in chain is not
- * called at all for @dma_direct_ops
+ * called at all for devices using coherent DMA.
* arch_sync_dma_for_cpu() -> dma_cache_*() -> __dma_cache_*()
*/
}
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index db203ff69ccf..1525ac00fd02 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -33,7 +33,7 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
*/
BUG_ON(gfp & __GFP_HIGHMEM);
- page = alloc_pages(gfp, order);
+ page = alloc_pages(gfp | __GFP_ZERO, order);
if (!page)
return NULL;
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index c9da6102eb4f..e2d9fc3fea01 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
struct vm_area_struct *vma = NULL;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
- int si_code;
+ int si_code = 0;
int ret;
vm_fault_t fault;
int write = regs->ecr_cause & ECR_C_PROTV_STORE; /* ST/EX */
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index f8fe5668b30f..43bf4c3a1290 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -78,24 +78,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
base, TO_MB(size), !in_use ? "Not used":"");
}
-#ifdef CONFIG_BLK_DEV_INITRD
-static int __init early_initrd(char *p)
-{
- unsigned long start, size;
- char *endp;
-
- start = memparse(p, &endp);
- if (*endp == ',') {
- size = memparse(endp + 1, NULL);
-
- initrd_start = (unsigned long)__va(start);
- initrd_end = (unsigned long)__va(start + size);
- }
- return 0;
-}
-early_param("initrd", early_initrd);
-#endif
-
/*
* First memory setup routine called from setup_arch()
* 1. setup swapper's mm @init_mm
@@ -140,8 +122,11 @@ void __init setup_arch_memory(void)
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
+ if (phys_initrd_size) {
+ memblock_reserve(phys_initrd_start, phys_initrd_size);
+ initrd_start = (unsigned long)__va(phys_initrd_start);
+ initrd_end = initrd_start + phys_initrd_size;
+ }
#endif
early_init_fdt_reserve_self();