summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi')
-rw-r--r--arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi53
1 files changed, 43 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index cefaa6994623..31e9f7049f73 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -41,6 +41,20 @@
regulator-max-microvolt = <5000000>;
};
};
+
+ usbphy {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ vcc-supply = <&sw3_reg>;
+ clocks = <&clks 0>;
+ clock-names = "main_clk";
+ };
+ };
};
&audmux {
@@ -66,9 +80,9 @@
status = "okay";
pmic: mc13783@0 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "fsl,mc13783";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
reg = <0>;
spi-cs-high;
spi-max-frequency = <20000000>;
@@ -166,7 +180,7 @@
&fec {
phy-mode = "mii";
- phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
phy-supply = <&reg_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
@@ -204,7 +218,6 @@
MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */
- MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
>;
};
@@ -251,6 +264,21 @@
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
+ >;
+ };
+
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <
+ MX27_PAD_SSI1_FS__SSI1_FS 0x0
+ MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+ MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+ MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
@@ -279,23 +307,28 @@
status = "okay";
};
+&ssi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssi1>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
phy_type = "ulpi";
+ fsl,usbphy = <&usbphy0>;
vbus-supply = <&sw3_reg>;
+ disable-over-current;
status = "okay";
};
-&usbphy0 {
- vcc-supply = <&sw3_reg>;
-};
-
&weim {
status = "okay";
- nor: nor@c0000000 {
+ nor: nor@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <2>;
@@ -305,7 +338,7 @@
#size-cells = <1>;
};
- sram: sram@c8000000 {
+ sram: sram@1,0 {
compatible = "mtd-ram";
reg = <1 0x00000000 0x00800000>;
bank-width = <2>;