summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6qdl-udoo.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-udoo.dtsi')
-rw-r--r--arch/arm/boot/dts/imx6qdl-udoo.dtsi98
1 files changed, 97 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d3e54e40a017..3bee2f910067 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -10,14 +10,49 @@
*/
/ {
+ aliases {
+ backlight = &backlight;
+ panelchan = &panelchan;
+ panel7 = &panel7;
+ touchscreenp7 = &touchscreenp7;
+ };
+
chosen {
stdout-path = &uart2;
};
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpio1 4 0>;
+ default-on;
+ status = "disabled";
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
+ panel7: panel7 {
+ /*
+ * in reality it is a -20t (parallel) model,
+ * but with LVDS bridge chip attached,
+ * so it is equivalent to -19t model in drive
+ * characteristics
+ */
+ compatible = "urt,umsh-8596md-19t";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel>;
+ power-supply = <&reg_panel>;
+ backlight = <&backlight>;
+ status = "disabled";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -33,6 +68,14 @@
startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
gpio = <&gpio7 12 0>;
};
+
+ reg_panel: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "lcd_panel";
+ enable-active-high;
+ gpio = <&gpio1 2 0>;
+ };
};
sound {
@@ -67,6 +110,24 @@
status = "okay";
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touchscreenp7: touchscreenp7@55 {
+ compatible = "sitronix,st1232";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreenp7>;
+ reg = <0x55>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 8>;
+ gpios = <&gpio1 15 0>;
+ status = "disabled";
+ };
+};
+
&iomuxc {
imx6q-udoo {
pinctrl_enet: enetgrp {
@@ -97,6 +158,27 @@
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70
+ >;
+ };
+
+ pinctrl_touchscreenp7: touchscreenp7grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70
+ MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
@@ -154,6 +236,20 @@
};
};
+&ldb {
+ status = "okay";
+
+ panelchan: lvds-channel@0 {
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -164,7 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh>;
vbus-supply = <&reg_usb_h1_vbus>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
status = "okay";
};