diff options
Diffstat (limited to 'arch/arm/boot/dts')
93 files changed, 2968 insertions, 1179 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0895c581a89..f9eae2f0ae5d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -64,6 +64,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ + kirkwood-db-88f6281.dtb \ + kirkwood-db-88f6282.dtb \ kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ @@ -199,6 +201,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra114-pluto.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 29b9f15e7599..54cb5cf8604a 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { chosen { @@ -46,7 +46,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 15 0>; + atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -90,23 +90,23 @@ compatible = "gpio-leds"; red { - gpios = <&pioC 10 0>; + gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; green { - gpios = <&pioA 5 1>; + gpios = <&pioA 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; yellow { - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; blue { - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 8e1248f01fab..77aa1b0cf6a7 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -394,7 +394,6 @@ compatible = "ti,am3352-ocmcram"; reg = <0x40300000 0x10000>; ti,hwmods = "ocmcram"; - ti,no_idle_on_suspend; }; wkup_m3: wkup_m3@44d00000 { diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 5160210f74da..3a1de9eb5111 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Somfy Animeo IP"; @@ -123,7 +123,7 @@ usb0: ohci@00500000 { num-ports = <2>; - atmel,vbus-gpio = <&pioB 15 1>; + atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -133,23 +133,23 @@ power_green { label = "power_green"; - gpios = <&pioC 17 0>; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; power_red { label = "power_red"; - gpios = <&pioA 2 0>; + gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; }; tx_green { label = "tx_green"; - gpios = <&pioC 19 0>; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; }; tx_red { label = "tx_red"; - gpios = <&pioC 18 0>; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; }; }; @@ -160,21 +160,21 @@ keyswitch_in { label = "keyswitch_in"; - gpios = <&pioB 1 0>; + gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; gpio-key,wakeup; }; error_in { label = "error_in"; - gpios = <&pioB 2 0>; + gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; gpio-key,wakeup; }; btn { label = "btn"; - gpios = <&pioC 23 0>; + gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 550eb772c30e..52a1f5efc086 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -80,7 +80,7 @@ sata@a0000 { compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; + reg = <0xa0000 0x5000>; interrupts = <55>; clocks = <&gateclk 15>, <&gateclk 30>; clock-names = "0", "1"; @@ -96,7 +96,7 @@ ethernet@70000 { compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x2500>; + reg = <0x70000 0x4000>; interrupts = <8>; clocks = <&gateclk 4>; status = "disabled"; @@ -104,7 +104,7 @@ ethernet@74000 { compatible = "marvell,armada-370-neta"; - reg = <0x74000 0x2500>; + reg = <0x74000 0x4000>; interrupts = <10>; clocks = <&gateclk 3>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index f4029f015aff..2d9335da210c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -92,7 +92,7 @@ ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0x34000 0x2500>; + reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 6ab56bd35de9..488ca5eb9a55 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -107,7 +107,7 @@ ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0x34000 0x2500>; + reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 5b902f9a3af2..1ee8540b0eba 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -88,7 +88,7 @@ ethernet@30000 { compatible = "marvell,armada-370-neta"; - reg = <0x30000 0x2500>; + reg = <0x30000 0x4000>; interrupts = <12>; clocks = <&gateclk 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index c7aebba4e8e7..5ede7678f298 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" +#include "at91sam9g25.dtsi" / { model = "Acme Systems Aria G25"; @@ -156,7 +156,7 @@ /* little green LED in middle of Aria G25 module */ aria_led { label = "aria_led"; - gpios = <&pioB 8 0>; /* PB8 */ + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ linux,default-trigger = "heartbeat"; }; @@ -164,7 +164,7 @@ onewire@0 { compatible = "w1-gpio"; - gpios = <&pioA 21 1>; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_w1_0>; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 5d3ed5aafc69..4aad0d9f5462 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -10,7 +10,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91RM9200 family SoC"; @@ -77,25 +80,29 @@ st: timer@fffffd00 { compatible = "atmel,at91rm9200-st"; reg = <0xfffffd00 0x100>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffa4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa4000 0x100>; - interrupts = <20 4 0 21 4 0 22 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 + 21 IRQ_TYPE_LEVEL_HIGH 0 + 22 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@fffb8000 { compatible = "atmel,at91rm9200-i2c"; reg = <0xfffb8000 0x4000>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; #address-cells = <1>; @@ -106,7 +113,7 @@ mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -115,7 +122,7 @@ ssc0: ssc@fffd0000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd0000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disable"; @@ -124,7 +131,7 @@ ssc1: ssc@fffd4000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd4000 0x4000>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disable"; @@ -133,7 +140,7 @@ ssc2: ssc@fffd8000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd8000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; status = "disable"; @@ -142,7 +149,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at91rm9200-emac", "cdns,emac"; reg = <0xfffbc000 0x4000>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; @@ -167,234 +174,234 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A */ - 0 31 0x1 0x1>; /* PA31 periph with pullup */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0>; /* PA18 periph A */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = - <0 20 0x1 0x0>; /* PA20 periph A */ + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = - <0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 20 0x1 0x1 /* PB20 periph A with pullup */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; pinctrl_uart1_rts: uart1_rts-0 { atmel,pins = - <1 24 0x1 0x0>; /* PB24 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB24 periph A */ }; pinctrl_uart1_cts: uart1_cts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; pinctrl_uart1_dcd: uart1_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_uart1_ri: uart1_ri-0 { atmel,pins = - <1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; }; uart2 { pinctrl_uart2: uart2-0 { atmel,pins = - <0 22 0x1 0x0 /* PA22 periph A */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 31 0x2 0x0>; /* PA31 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA31 periph B */ }; }; uart3 { pinctrl_uart3: uart3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 6 0x2 0x0>; /* PA6 periph B */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */ }; pinctrl_uart3_rts: uart3_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart3_cts: uart3_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ - 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC2 gpio RDY pin pull_up */ + AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PB1 gpio CD pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 7 0x1 0x0 /* PA7 periph A */ - 0 8 0x1 0x0 /* PA8 periph A */ - 0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0>; /* PA16 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA16 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <1 12 0x2 0x0 /* PB12 periph B */ - 1 13 0x2 0x0 /* PB13 periph B */ - 1 14 0x2 0x0 /* PB14 periph B */ - 1 15 0x2 0x0 /* PB15 periph B */ - 1 16 0x2 0x0 /* PB16 periph B */ - 1 17 0x2 0x0 /* PB17 periph B */ - 1 18 0x2 0x0 /* PB18 periph B */ - 1 19 0x2 0x0>; /* PB19 periph B */ + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB12 periph B */ + AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB13 periph B */ + AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB15 periph B */ + AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB16 periph B */ + AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB17 periph B */ + AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB18 periph B */ + AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB19 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA29 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <1 3 0x2 0x1 /* PB3 periph B with pullup */ - 1 4 0x2 0x1 /* PB4 periph B with pullup */ - 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB3 periph B with pullup */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB4 periph B with pullup */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PB5 periph B with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 8 0x2 0x1 /* PA8 periph B with pullup */ - 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA8 periph B with pullup */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA9 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 10 0x2 0x1 /* PA10 periph B with pullup */ - 0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA10 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA12 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0>; /* PB2 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; ssc2 { pinctrl_ssc2_tx: ssc2_tx-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0>; /* PB14 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A */ }; pinctrl_ssc2_rx: ssc2_rx-0 { atmel,pins = - <1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; twi { pinctrl_twi: twi-0 { atmel,pins = - <0 25 0x1 0x2 /* PA25 periph A with multi drive */ - 0 26 0x1 0x2>; /* PA26 periph A with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* PA25 periph A with multi drive */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* PA26 periph A with multi drive */ }; pinctrl_twi_gpio: twi_gpio-0 { atmel,pins = - <0 25 0x0 0x2 /* PA25 GPIO with multi drive */ - 0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA25 GPIO with multi drive */ + AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA26 GPIO with multi drive */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -404,7 +411,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -414,7 +421,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +431,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -435,7 +442,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -444,7 +451,7 @@ usart0: serial@fffc0000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -455,7 +462,7 @@ usart1: serial@fffc4000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -466,7 +473,7 @@ usart2: serial@fffc8000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -477,7 +484,7 @@ usart3: serial@fffcc000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffcc000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -488,7 +495,7 @@ usb1: gadget@fffb0000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; - interrupts = <11 4 2>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; @@ -503,9 +510,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; nand-ecc-mode = "soft"; - gpios = <&pioC 2 0 + gpios = <&pioC 2 GPIO_ACTIVE_HIGH 0 - &pioB 1 0 + &pioB 1 GPIO_ACTIVE_HIGH >; status = "disabled"; }; @@ -513,15 +520,15 @@ usb0: ohci@00300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; - interrupts = <23 4 2>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 0 /* sda */ - &pioA 26 0 /* scl */ + gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ + &pioA 26 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index e586d85f8e23..14058125d123 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Atmel AT91RM9200 evaluation kit"; @@ -50,7 +50,7 @@ }; usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 0>; + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -66,19 +66,19 @@ ds2 { label = "green"; - gpios = <&pioB 0 0x1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; ds4 { label = "yellow"; - gpios = <&pioB 1 0x1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; ds6 { label = "red"; - gpios = <&pioB 2 0x1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 84c4bef2d726..44851b977069 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9260 family SoC"; @@ -84,19 +87,23 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 0 27 4 0 28 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 + 27 IRQ_TYPE_LEVEL_HIGH 0 + 28 IRQ_TYPE_LEVEL_HIGH 0>; }; pinctrl@fffff400 { @@ -116,234 +123,234 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 27 0x1 0x0>; /* PB27 periph A */ + <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */ }; pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A */ - 1 22 0x1 0x0>; /* PB22 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */ }; pinctrl_usart0_dcd: usart0_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_usart0_ri: usart0_ri-0 { atmel,pins = - <1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <1 28 0x1 0x0>; /* PB28 periph A */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <1 29 0x1 0x0>; /* PB29 periph A */ + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 8 0x1 0x1 /* PB8 periph A with pullup */ - 1 9 0x1 0x0>; /* PB9 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 10 0x1 0x1 /* PB10 periph A with pullup */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 8 0x2 0x0>; /* PC8 periph B */ + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 10 0x2 0x0>; /* PC10 periph B */ + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 31 0x2 0x1 /* PA31 periph B with pullup */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 12 0x1 0x1 /* PB12 periph A with pullup */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0 /* PA19 periph A */ - 0 20 0x1 0x0 /* PA20 periph A */ - 0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA19 periph A */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA20 periph A */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 22 0x2 0x0 /* PA22 periph B */ - 0 23 0x2 0x0 /* PA23 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA23 periph B */ + AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { atmel,pins = - <0 10 0x2 0x0 /* PA10 periph B */ - 0 11 0x2 0x0 /* PA11 periph B */ - 0 22 0x2 0x0 /* PA22 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA10 periph B */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA11 periph B */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA6 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 1 0x2 0x1 /* PA1 periph B with pullup */ - 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */ + AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 4 0x2 0x1 /* PA4 periph B with pullup */ - 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA3 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0 /* PB17 periph A */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 20 0x1 0x0 /* PB20 periph A */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ - 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ - 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI1_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI1_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -353,7 +360,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -363,7 +370,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +381,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -383,7 +390,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -394,7 +401,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -405,7 +412,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -416,7 +423,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -427,7 +434,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4 5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -438,7 +445,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4 5>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -449,7 +456,7 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -458,14 +465,14 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4 2>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fffac000 { compatible = "atmel,at91sam9260-i2c"; reg = <0xfffac000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -474,7 +481,7 @@ mmc0: mmc@fffa8000 { compatible = "atmel,hsmci"; reg = <0xfffa8000 0x600>; - interrupts = <9 4 0>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -483,7 +490,7 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -494,7 +501,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffc8000 0x200>; - interrupts = <12 4 3>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -505,7 +512,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffcc000 0x200>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -514,7 +521,7 @@ adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -567,8 +574,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 13 0 - &pioC 14 0 + gpios = <&pioC 13 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -577,15 +584,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4 2>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ + &pioA 24 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 94b58ab2cc08..d9cf51a01b60 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -6,7 +6,10 @@ * Licensed under GPLv2 only. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9263 family SoC"; @@ -72,13 +75,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; }; rstc@fffffd00 { @@ -110,221 +113,221 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <2 30 0x1 0x0 /* PC30 periph A */ - 2 31 0x1 0x1>; /* PC31 periph with pullup */ + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 26 0x1 0x1 /* PA26 periph A with pullup */ - 0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 28 0x1 0x0>; /* PA28 periph A */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 29 0x1 0x0>; /* PA29 periph A */ + <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <3 0 0x1 0x1 /* PD0 periph A with pullup */ - 3 1 0x1 0x0>; /* PD1 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 7 0x2 0x0>; /* PD7 periph B */ + <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 8 0x2 0x0>; /* PD8 periph B */ + <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A with pullup */ - 3 3 0x1 0x0>; /* PD3 periph A */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <3 5 0x2 0x0>; /* PD5 periph B */ + <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <4 6 0x2 0x0>; /* PD6 periph B */ + <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ - 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/ + AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <2 25 0x2 0x0 /* PC25 periph B */ - 4 21 0x1 0x0 /* PE21 periph A */ - 4 23 0x1 0x0 /* PE23 periph A */ - 4 24 0x1 0x0 /* PE24 periph A */ - 4 25 0x1 0x0 /* PE25 periph A */ - 4 26 0x1 0x0 /* PE26 periph A */ - 4 27 0x1 0x0 /* PE27 periph A */ - 4 28 0x1 0x0 /* PE28 periph A */ - 4 29 0x1 0x0 /* PE29 periph A */ - 4 30 0x1 0x0>; /* PE30 periph A */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 22 0x2 0x0 /* PC22 periph B */ - 2 23 0x2 0x0 /* PC23 periph B */ - 2 24 0x2 0x0 /* PC24 periph B */ - 2 25 0x2 0x0 /* PC25 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 4 22 0x2 0x0>; /* PE22 periph B */ + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */ + AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */ + AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 12 0x1 0x0>; /* PA12 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_clk: mmc1_clk-0 { atmel,pins = - <0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { atmel,pins = - <0 21 0x1 0x1 /* PA21 periph A with pullup */ - 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */ }; pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { atmel,pins = - <0 23 0x1 0x1 /* PA23 periph A with pullup */ - 0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x2 0x0 /* PB0 periph B */ - 1 1 0x2 0x0 /* PB1 periph B */ - 1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */ + AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */ + AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x2 0x0 /* PB3 periph B */ - 1 4 0x2 0x0 /* PB4 periph B */ - 1 5 0x2 0x0>; /* PB5 periph B */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ - 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ - 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ - 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ - 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -334,7 +337,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -344,7 +347,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +357,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +367,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -375,7 +378,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -384,7 +387,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -395,7 +398,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -406,7 +409,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -417,7 +420,7 @@ ssc0: ssc@fff98000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -426,7 +429,7 @@ ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -435,7 +438,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -444,14 +447,14 @@ usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4 2>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fff88000 { compatible = "atmel,at91sam9263-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -460,7 +463,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -469,7 +472,7 @@ mmc1: mmc@fff84000 { compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -486,7 +489,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa4000 0x200>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -497,7 +500,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa8000 0x200>; - interrupts = <15 4 3>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -515,8 +518,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioA 22 0 - &pioD 15 0 + gpios = <&pioA 22 GPIO_ACTIVE_HIGH + &pioD 15 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -525,15 +528,15 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4 2>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 3b82d91e7fcc..eff1afb81304 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Atmel at91sam9263ek"; @@ -51,7 +51,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioA 25 0>; + atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -65,8 +65,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioE 18 0>; - wp-gpios = <&pioE 19 0>; + cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; }; }; @@ -74,8 +74,8 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ - 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ + AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ }; }; }; @@ -141,8 +141,8 @@ usb0: ohci@00a00000 { num-ports = <2>; status = "okay"; - atmel,vbus-gpio = <&pioA 24 0 - &pioA 21 0 + atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH + &pioA 21 GPIO_ACTIVE_HIGH >; }; }; @@ -152,13 +152,13 @@ d3 { label = "d3"; - gpios = <&pioB 7 0>; + gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d2 { label = "d2"; - gpios = <&pioC 29 1>; + gpios = <&pioC 29 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; }; @@ -168,14 +168,14 @@ left_click { label = "left_click"; - gpios = <&pioC 5 1>; + gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioC 4 1>; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index 28467fd6bf96..cfd7044616d7 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G15 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 5427b2dba87e..26b0444b0f96 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g15.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g15.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G15-EK"; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 75ce6e760016..b8e79466014f 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Atmel AT91SAM9G20 family SoC"; diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts index e5324bf9d529..bbfd753112c9 100644 --- a/arch/arm/boot/dts/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/at91sam9g20ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek"; @@ -17,13 +17,13 @@ ds1 { label = "ds1"; - gpios = <&pioA 9 0>; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioA 6 1>; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index 66467b113126..bdb799bad179 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek 2 mmc"; @@ -23,7 +23,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioC 2 0>; + cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; }; }; @@ -31,7 +31,7 @@ mmc0_slot0 { pinctrl_board_mmc0_slot0: mmc0_slot0-board { atmel,pins = - <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC2 gpio CD pin pull up and deglitch */ }; }; }; @@ -43,13 +43,13 @@ ds1 { label = "ds1"; - gpios = <&pioB 9 0>; + gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioB 8 1>; + gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 6a92c5baef8c..c7ffc32918f9 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -5,7 +5,7 @@ * * Licensed under GPLv2. */ -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -34,10 +34,17 @@ board { pinctrl_pck0_as_mck: pck0_as_mck { atmel,pins = - <2 1 0x2 0x0>; /* PC1 periph B */ + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ }; }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; }; dbgu: serial@fffff200 { @@ -65,7 +72,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -79,16 +86,7 @@ slot@1 { reg = <1>; bus-width = <4>; - cd-gpios = <&pioC 9 0>; - }; - }; - - pinctrl@fffff400 { - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ - }; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; }; }; @@ -180,14 +178,14 @@ btn3 { label = "Button 3"; - gpios = <&pioA 30 1>; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { label = "Button 4"; - gpios = <&pioA 31 1>; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 5fd32df03f25..b4ec6fe53fc7 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index a1c511fecdc1..1e4c49c584d3 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index d6fa8af50724..bebf9f55614b 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 6f58ab8d21f5..641a9bf89ed1 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G35-EK"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bf18a735c37d..f0091af6c285 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9G45 family SoC"; @@ -83,7 +86,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; @@ -95,19 +98,19 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -130,221 +133,221 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 19 0x1 0x1 /* PB19 periph A with pullup */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 17 0x2 0x0>; /* PB17 periph B */ + <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 15 0x2 0x0>; /* PB15 periph B */ + <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */ }; }; uart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 4 0x1 0x1 /* PB4 periph A with pullup */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 16 0x1 0x0>; /* PD16 periph A */ + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 17 0x1 0x0>; /* PD17 periph A */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <2 9 0x2 0x0>; /* PC9 periph B */ + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC9 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <2 11 0x2 0x0>; /* PC11 periph B */ + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 8 0x1 0x1 /* PB9 periph A with pullup */ - 1 9 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <0 23 0x2 0x0>; /* PA23 periph B */ + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <0 24 0x2 0x0>; /* PA24 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0>; /* PA19 periph A */ + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 6 0x2 0x0 /* PA6 periph B */ - 0 7 0x2 0x0 /* PA7 periph B */ - 0 8 0x2 0x0 /* PA8 periph B */ - 0 9 0x2 0x0 /* PA9 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0 /* PA29 periph B */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA6 periph B */ + AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA7 periph B */ + AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA8 periph B */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA9 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA29 periph B */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A */ - 0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA2 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA9 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 31 0x1 0x0 /* PA31 periph A */ - 0 22 0x1 0x1 /* PA22 periph A with pullup */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA31 periph A */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA22 periph A with pullup */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1 /* PA25 periph A with pullup */ - 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA25 periph A with pullup */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA26 periph A with pullup */ }; pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { atmel,pins = - <0 27 0x1 0x1 /* PA27 periph A with pullup */ - 0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1 /* PA29 periph A with pullup */ - 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA27 periph A with pullup */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA29 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA30 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A */ - 3 1 0x1 0x0 /* PD1 periph A */ - 3 2 0x1 0x0>; /* PD2 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <3 3 0x1 0x0 /* PD3 periph A */ - 3 4 0x1 0x0 /* PD4 periph A */ - 3 5 0x1 0x0>; /* PD5 periph A */ + <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD4 periph A */ + AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A */ - 3 11 0x1 0x0 /* PD11 periph A */ - 3 12 0x1 0x0>; /* PD12 periph A */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <3 13 0x1 0x0 /* PD13 periph A */ - 3 14 0x1 0x0 /* PD14 periph A */ - 3 15 0x1 0x0>; /* PD15 periph A */ + <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD13 periph A */ + AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI0_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI0_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ - 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ - 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A SPI1_MISO pin */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A SPI1_MOSI pin */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +357,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +367,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +377,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -384,7 +387,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -395,7 +398,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -404,7 +407,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -415,7 +418,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -426,7 +429,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -437,7 +440,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4 5>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -448,7 +451,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -457,7 +460,7 @@ i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -466,7 +469,7 @@ i2c1: i2c@fff88000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -475,7 +478,7 @@ ssc0: ssc@fff9c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -484,7 +487,7 @@ ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -493,7 +496,7 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -533,7 +536,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -544,7 +547,7 @@ mmc1: mmc@fffd0000 { compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; - interrupts = <29 4 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 13>; dma-names = "rxtx"; #address-cells = <1>; @@ -592,8 +595,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 8 0 - &pioC 14 0 + gpios = <&pioC 8 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -602,22 +605,22 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 20 0 /* sda */ - &pioA 21 0 /* scl */ + gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ + &pioA 21 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 51d9251b5bbe..89c50d108d44 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Atmel AT91SAM9M10G45-EK"; @@ -68,7 +68,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 10 0>; + cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 11 0>; - wp-gpios = <&pioD 29 0>; + cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; }; }; @@ -90,15 +90,15 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ - 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ + AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ }; }; }; @@ -139,8 +139,8 @@ usb0: ohci@00700000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 1 - &pioD 3 1>; + atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW + &pioD 3 GPIO_ACTIVE_LOW>; }; usb1: ehci@00800000 { @@ -153,19 +153,19 @@ d8 { label = "d8"; - gpios = <&pioD 30 0>; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d6 { label = "d6"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - gpios = <&pioD 31 1>; + gpios = <&pioD 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; }; @@ -175,45 +175,45 @@ left_click { label = "left_click"; - gpios = <&pioB 6 1>; + gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioB 7 1>; + gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; left { label = "Joystick Left"; - gpios = <&pioB 14 1>; + gpios = <&pioB 14 GPIO_ACTIVE_LOW>; linux,code = <105>; }; right { label = "Joystick Right"; - gpios = <&pioB 15 1>; + gpios = <&pioB 15 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "Joystick Up"; - gpios = <&pioB 16 1>; + gpios = <&pioB 16 GPIO_ACTIVE_LOW>; linux,code = <103>; }; down { label = "Joystick Down"; - gpios = <&pioB 17 1>; + gpios = <&pioB 17 GPIO_ACTIVE_LOW>; linux,code = <108>; }; enter { label = "Joystick Press"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,code = <28>; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 8d25f889928e..d864f7a9d2e0 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -7,7 +7,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -78,7 +81,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; shdwc@fffffe10 { @@ -89,7 +92,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -100,19 +103,19 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -134,159 +137,159 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x0>; /* PA0 periph A */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 7 0x1 0x0>; /* PA7 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC23 periph B with pullup */ - 2 22 0x2 0x0>; /* PC22 periph B */ + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 9 0x3 0x1 /* PC9 periph C with pullup */ - 2 8 0x3 0x0>; /* PC8 periph C */ + <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */ + AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x1 /* PC17 periph C with pullup */ - 2 17 0x3 0x0>; /* PC16 periph C */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ - 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 13 0x2 0x1 /* PA13 periph B with pullup */ - 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */ + AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -296,7 +299,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -306,7 +309,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -316,7 +319,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -327,7 +330,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -336,7 +339,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -345,7 +348,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -354,7 +357,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -363,7 +366,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -372,7 +375,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -381,7 +384,7 @@ i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 13>, <&dma 1 14>; dma-names = "tx", "rx"; @@ -393,7 +396,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 15>, <&dma 1 16>; dma-names = "tx", "rx"; @@ -407,7 +410,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -418,7 +421,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -439,8 +442,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -449,15 +452,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d30e48bd1e9d..2e67cd5e47eb 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9n12.dtsi" +#include "at91sam9n12.dtsi" / { model = "Atmel AT91SAM9N12-EK"; @@ -55,7 +55,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioA 7 0>; + cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; }; }; @@ -63,7 +63,7 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */ }; }; }; @@ -95,19 +95,19 @@ d8 { label = "d8"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; d9 { label = "d6"; - gpios = <&pioB 5 1>; + gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { label = "d7"; - gpios = <&pioB 6 0>; + gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -117,7 +117,7 @@ enter { label = "Enter"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 9ac2bc2b4f07..49e94aba938f 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; @@ -26,16 +26,16 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 16 0x2 0x0 /* PC16 periph B */ - 2 18 0x2 0x0 /* PC18 periph B */ - 2 19 0x2 0x0 /* PC19 periph B */ - 2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 2 28 0x2 0x0 /* PC28 periph B */ - 2 29 0x2 0x0 /* PC29 periph B */ - 2 30 0x2 0x0 /* PC30 periph B */ - 2 31 0x2 0x0>; /* PC31 periph B */ + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 315250b4995e..494864836e83 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X25-EK"; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index ba67d83d17ac..1a3d525a1f5d 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 6ad19a0d5424..343d32818ca3 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X35-EK"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1145ac330fb7..af91599488e9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -85,32 +88,32 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -124,297 +127,297 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 0 0x1 0x1 /* PA0 periph A with pullup */ - 0 1 0x1 0x0>; /* PA1 periph A */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; pinctrl_usart0_sck: usart0_sck-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 5 0x1 0x1 /* PA5 periph A with pullup */ - 0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <2 27 0x3 0x0>; /* PC27 periph C */ + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC28 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ }; pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC29 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; pinctrl_usart2_sck: usart2_sck-0 { atmel,pins = - <1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 22 0x2 0x1 /* PC22 periph B with pullup */ - 2 23 0x2 0x0>; /* PC23 periph B */ + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; pinctrl_usart3_sck: usart3_sck-0 { atmel,pins = - <2 26 0x2 0x0>; /* PC26 periph B */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 8 0x3 0x0 /* PC8 periph C */ - 2 9 0x3 0x1>; /* PC9 periph C with pullup */ + <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ + AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x0 /* PC16 periph C */ - 2 17 0x3 0x1>; /* PC17 periph C with pullup */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A Read Enable */ - 3 1 0x1 0x0 /* PD1 periph A Write Enable */ - 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ - 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ - 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ - 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ - 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ - 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ - 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ - 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ - 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ - 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ - 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ - 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ + AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ }; pinctrl_nand_16bits: nand_16bits-0 { atmel,pins = - <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ - 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ - 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ - 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ - 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ - 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ - 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ - 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ }; }; macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0 /* PB2 periph A */ - 1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0 /* PB5 periph A */ - 1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0>; /* PB10 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A */ - 1 11 0x1 0x0 /* PB11 periph A */ - 1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 13 0x2 0x0 /* PA13 periph B */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 2 0x2 0x1 /* PA2 periph B with pullup */ - 0 3 0x2 0x1 /* PA3 periph B with pullup */ - 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ - 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ - 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = - <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ - 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ }; }; i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = - <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ - 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ }; }; i2c_gpio1 { pinctrl_i2c_gpio1: i2c_gpio1-0 { atmel,pins = - <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ - 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ }; }; i2c_gpio2 { pinctrl_i2c_gpio2: i2c_gpio2-0 { atmel,pins = - <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ - 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +427,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <19>; @@ -435,7 +438,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -445,7 +448,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <22>; @@ -457,7 +460,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -466,7 +469,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -477,7 +480,7 @@ mmc1: mmc@f000c000 { compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -488,7 +491,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -497,7 +500,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -506,7 +509,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -515,7 +518,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -524,7 +527,7 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; @@ -533,14 +536,14 @@ macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4 3>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; status = "disabled"; }; i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 7>, <&dma0 1 8>; dma-names = "tx", "rx"; @@ -554,7 +557,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 1 5>, <&dma1 1 6>; dma-names = "tx", "rx"; @@ -568,7 +571,7 @@ i2c2: i2c@f8018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 9>, <&dma0 1 10>; dma-names = "tx", "rx"; @@ -582,7 +585,7 @@ adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -625,7 +628,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -636,7 +639,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -645,7 +648,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x40>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; }; @@ -664,8 +667,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -674,22 +677,22 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -703,8 +706,8 @@ i2c@1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 0 /* sda */ - &pioC 1 0 /* scl */ + gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ + &pioC 1 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -718,8 +721,8 @@ i2c@2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 347a74a857f6..4a5ee5cc115a 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -28,7 +28,7 @@ pinctrl@fffff400 { 1wire_cm { pinctrl_1wire_cm: 1wire_cm-0 { - atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ }; }; }; @@ -75,19 +75,19 @@ pb18 { label = "pb18"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; pd21 { label = "pd21"; - gpios = <&pioD 21 0>; + gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; }; 1wire_cm { compatible = "w1-gpio"; - gpios = <&pioB 18 0>; + gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; linux,open-drain; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_1wire_cm>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 1fa48d2bfd80..19c8ebb303f4 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "at91sam9x5cm.dtsi" +#include "at91sam9x5cm.dtsi" / { model = "Atmel AT91SAM9X5-EK"; @@ -27,7 +27,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 15 0>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; }; }; @@ -40,7 +40,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 14 0>; + cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; }; }; @@ -60,14 +60,14 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ }; }; }; @@ -86,8 +86,8 @@ usb0: ohci@00600000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 + atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW >; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 1ea9d34460a4..143b6d25bc80 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Ethernut 5"; @@ -40,7 +40,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -52,7 +52,7 @@ status = "okay"; gpios = <0 - &pioC 14 0 + &pioC 14 GPIO_ACTIVE_HIGH 0 >; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index 96e50f569433..4d829685fdfb 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { model = "Telit EVK-PRO3 for Telit GE863-PRO3"; @@ -31,7 +31,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -50,4 +50,4 @@ status = "okay"; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb34c0a..ded558bb0f3b 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -763,7 +763,7 @@ }; }; - pinctrl@03680000 { + pinctrl@03860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0673524238a6..fc9fb3d526e2 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -161,9 +161,9 @@ interrupts = <0 50 0>; }; - pinctrl_3: pinctrl@03680000 { + pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5250-pinctrl"; - reg = <0x0368000 0x1000>; + reg = <0x03860000 0x1000>; interrupts = <0 47 0>; }; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index d55042beb5c5..f96de398c965 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -30,4 +30,12 @@ clock-frequency = <50000000>; }; }; + + pcie@290000 { + reset-gpio = <&pin_ctrl 5 0>; + }; + + pcie@2a0000 { + reset-gpio = <&pin_ctrl 22 0>; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f6b1c8973845..b7ffc4dfe219 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -113,7 +113,7 @@ clock-names = "spi", "spi_busclk0"; }; - pinctrl { + pin_ctrl: pinctrl { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, @@ -216,4 +216,42 @@ clock-names = "rtc"; status = "disabled"; }; + + pcie@290000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x290000 0x1000 + 0x270000 0x1000 + 0x271000 0x40>; + interrupts = <0 20 0>, <0 21 0>, <0 22 0>; + clocks = <&clock 28>, <&clock 27>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */ + 0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 53>; + }; + + pcie@2a0000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x2a0000 0x1000 + 0x272000 0x1000 + 0x271040 0x40>; + interrupts = <0 23 0>, <0 24 0>, <0 25 0>; + clocks = <&clock 29>, <&clock 27>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */ + 0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 56>; + }; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 17136fc7a516..230099bb31c8 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { clocks { diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index c9c3fa344647..b6b82eca8d1e 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -39,6 +39,47 @@ valid-mask = <0x003fffff>; }; + pci: pciv3@62000000 { + compatible = "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + ranges = <0x00000000 0 0x61000000 /* config space */ + 0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */ + 0x01000000 0 0x0 /* I/O space */ + 0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */ + 0x02000000 0 0x00000000 /* non-prefectable memory */ + 0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */ + 0x42000000 0 0x10000000 /* prefetchable memory */ + 0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; + }; + fpga { /* * The Integator/AP predates the idea to have magic numbers diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts new file mode 100644 index 000000000000..1334b42c6b77 --- /dev/null +++ b/arch/arm/boot/dts/keystone.dts @@ -0,0 +1,117 @@ +/* + * Copyright 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "Texas Instruments Keystone 2 SoC"; + compatible = "ti,keystone-evm"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + }; + + memory { + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gic>; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <3>; + }; + }; + + gic: interrupt-controller { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #size-cells = <0>; + #address-cells = <1>; + interrupt-controller; + reg = <0x0 0x02561000 0x0 0x1000>, + <0x0 0x02562000 0x0 0x2000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0x308>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <0 20 0xf01>, + <0 21 0xf01>, + <0 22 0xf01>, + <0 23 0xf01>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,keystone","simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0x0 0x0 0xc0000000>; + + rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + reg = <0x023100e8 4>; /* pll reset control reg */ + }; + + uart0: serial@02530c00 { + compatible = "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02530c00 0x100>; + clock-frequency = <133120000>; + interrupts = <0 277 0xf01>; + }; + + uart1: serial@02531000 { + compatible = "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02531000 0x100>; + clock-frequency = <133120000>; + interrupts = <0 280 0xf01>; + }; + + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index d6c9d65cbaeb..51376683dbcd 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -40,5 +40,36 @@ marvell,function = "sdio"; }; }; + + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 23991e45bc55..66a751ab5516 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -65,5 +65,53 @@ clocks = <&gate_clk 7>; status = "disabled"; }; + + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x00044000 0x00044000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 10>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 18>; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts new file mode 100644 index 000000000000..9d777edd1f36 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -0,0 +1,30 @@ +/* + * Marvell DB-88F6281-BP Development Board Setup + * + * Saeed Bishara <saeed@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/include/ "kirkwood-db.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "Marvell DB-88F6281-BP Development Board"; + compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts new file mode 100644 index 000000000000..f4c852886d23 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -0,0 +1,34 @@ +/* + * Marvell DB-88F6282-BP Development Board Setup + * + * Saeed Bishara <saeed@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/include/ "kirkwood-db.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "Marvell DB-88F6282-BP Development Board"; + compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + ocp@f1000000 { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + + pcie@2,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi new file mode 100644 index 000000000000..c87cfb816120 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -0,0 +1,89 @@ +/* + * Marvell DB-{88F6281,88F6282}-BP Development Board Setup + * + * Saeed Bishara <saeed@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common between the 6281 + * and 6282 variants of the Marvell Kirkwood Development Board. + */ + +/include/ "kirkwood.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl@10000 { + pmx_sdio_gpios: pmx-sdio-gpios { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + chip-delay = <25>; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x500000 0x1fb00000>; + }; + }; + + sata@80000 { + nr-ports = <2>; + status = "okay"; + }; + + ehci@50000 { + status = "okay"; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio_gpios>; + pinctrl-names = "default"; + wp-gpios = <&gpio1 5 0>; + cd-gpios = <&gpio1 6 0>; + status = "okay"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 12ccf74ac3c4..e591d5df769f 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -109,6 +109,14 @@ reg = <0x980000 0x1f400000>; }; }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 758824118a9a..90501cf129bb 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -139,6 +139,14 @@ cd-gpios = <&gpio1 15 0>; /* No WP GPIO */ }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 1ca66ab83ad6..0f852b40f5c1 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -111,6 +111,14 @@ status = "okay"; nr-ports = <2>; }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index a7412b937a8a..9ddf218f2cbd 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -176,6 +176,14 @@ reg = <0x5040000 0x2fc0000>; }; }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; gpio_keys { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index 8295c833887f..42648ab77c61 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,7 +1,8 @@ /dts-v1/; -/include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood.dtsi" /include/ "kirkwood-6281.dtsi" +/include/ "kirkwood-ts219.dtsi" / { ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index df3f95dfba33..95ceeb93ba5a 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,7 +1,8 @@ /dts-v1/; -/include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood.dtsi" /include/ "kirkwood-6282.dtsi" +/include/ "kirkwood-ts219.dtsi" / { ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 4e29460baf04..09c820fc177f 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -1,5 +1,3 @@ -/include/ "kirkwood.dtsi" - / { model = "QNAP TS219 family"; compatible = "qnap,ts219", "marvell,kirkwood"; @@ -79,5 +77,12 @@ status = "okay"; nr-ports = <2>; }; + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index fada7e6d24d8..7eef88f00fea 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -19,6 +19,7 @@ ocp@f1000000 { compatible = "simple-bus"; ranges = <0x00000000 0xf1000000 0x4000000 + 0xe0000000 0xe0000000 0x8100000 /* PCIE */ 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index b4dc3ed9a3ec..02df1914a47c 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -94,26 +94,26 @@ led1g { label = "led1:green"; - gpios = <&pioB 0 1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led1r { label = "led1:red"; - gpios = <&pioB 1 1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led2g { label = "led2:green"; - gpios = <&pioB 2 1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; led2r { label = "led2:red"; - gpios = <&pioB 3 1>; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; @@ -125,16 +125,16 @@ reset { label = "reset"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; linux,code = <0x100>; gpio-key,wakeup; }; mode { label = "mode"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; linux,code = <0x101>; gpio-key,wakeup; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 317300875f34..ccf9ea242f72 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Phontech MPA 1600"; @@ -62,7 +62,7 @@ monitor_mute { label = "Monitor mute"; - gpios = <&pioC 1 1>; + gpios = <&pioC 1 GPIO_ACTIVE_LOW>; linux,code = <113>; }; }; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 9bf49b3826ea..cdc010e0f93e 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -15,7 +15,7 @@ < 0x02081000 0x1000 >; }; - timer@2000004 { + timer@2000000 { compatible = "qcom,scss-timer", "qcom,msm-timer"; interrupts = <1 0 0x301>, <1 1 0x301>, @@ -26,7 +26,18 @@ cpu-offset = <0x40000>; }; - serial@19c400000 { + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 32 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + serial@19c40000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 2e4d87a125d6..db2060c46540 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,18 @@ cpu-offset = <0x80000>; }; - serial@19c400000 { + msmgpio: gpio@fd510000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 32 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xfd510000 0x4000>; + }; + + serial@16440000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 387fedb58988..33ffabe9c4c8 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Ronetix pm9g45"; @@ -42,15 +42,15 @@ board { pinctrl_board_nand: nand0-board { atmel,pins = - <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD3 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; mmc { pinctrl_board_mmc: mmc0-board { atmel,pins = - <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + <AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD6 gpio CD pin pull_up and deglitch */ }; }; }; @@ -64,7 +64,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 6 0>; + cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ nand-on-flash-bbt; pinctrl-0 = <&pinctrl_board_nand>; - gpios = <&pioD 3 0 - &pioC 14 0 + gpios = <&pioD 3 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; @@ -134,13 +134,13 @@ led0 { label = "led0"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; led1 { label = "led1"; - gpios = <&pioD 31 0>; + gpios = <&pioD 31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -152,13 +152,13 @@ right { label = "SW4"; - gpios = <&pioE 7 1>; + gpios = <&pioE 7 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "SW3"; - gpios = <&pioE 8 1>; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; linux,code = <103>; }; }; diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi new file mode 100644 index 000000000000..6e307fc4c451 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-clocks.dtsi @@ -0,0 +1,299 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + dummy48m: dummy48m { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + dummy150m: dummy150m { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + + clk_gates0: gate-clk@200000d0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d0 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_core_periph", "gate_cpu_gpll", + "gate_ddrphy", "gate_aclk_cpu", + "gate_hclk_cpu", "gate_pclk_cpu", + "gate_atclk_cpu", "gate_i2s0", + "gate_i2s0_frac", "gate_i2s1", + "gate_i2s1_frac", "gate_i2s2", + "gate_i2s2_frac", "gate_spdif", + "gate_spdif_frac", "gate_testclk"; + + #clock-cells = <1>; + }; + + clk_gates1: gate-clk@200000d4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d4 0x4>; + clocks = <&xin24m>, <&xin24m>, + <&xin24m>, <&dummy>, + <&dummy>, <&xin24m>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_timer0", "gate_timer1", + "gate_timer2", "gate_jtag", + "gate_aclk_lcdc1_src", "gate_otgphy0", + "gate_otgphy1", "gate_ddr_gpll", + "gate_uart0", "gate_frac_uart0", + "gate_uart1", "gate_frac_uart1", + "gate_uart2", "gate_frac_uart2", + "gate_uart3", "gate_frac_uart3"; + + #clock-cells = <1>; + }; + + clk_gates2: gate-clk@200000d8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d8 0x4>; + clocks = <&clk_gates2 1>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&clk_gates2 3>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_periph_src", "gate_aclk_periph", + "gate_hclk_periph", "gate_pclk_periph", + "gate_smc", "gate_mac", + "gate_hsadc", "gate_hsadc_frac", + "gate_saradc", "gate_spi0", + "gate_spi1", "gate_mmc0", + "gate_mac_lbtest", "gate_mmc1", + "gate_emmc", "gate_tsadc"; + + #clock-cells = <1>; + }; + + clk_gates3: gate-clk@200000dc { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000dc 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", + "gate_dclk_lcdc1", "gate_pclkin_cif0", + "gate_pclkin_cif1", "reserved", + "reserved", "gate_cif0_out", + "gate_cif1_out", "gate_aclk_vepu", + "gate_hclk_vepu", "gate_aclk_vdpu", + "gate_hclk_vdpu", "gate_gpu_src", + "reserved", "gate_xin27m"; + + #clock-cells = <1>; + }; + + clk_gates4: gate-clk@200000e0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e0 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates2 3>, + <&clk_gates2 1>, <&clk_gates2 1>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates0 4>, <&clk_gates0 4>, + <&clk_gates0 3>, <&clk_gates0 3>, + <&clk_gates0 3>, <&clk_gates2 3>, + <&clk_gates0 4>; + + clock-output-names = + "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", + "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", + "gate_aclk_pei_niu", "gate_hclk_usb_peri", + "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", + "gate_hclk_cpubus", "gate_hclk_ahb2apb", + "gate_aclk_strc_sys", "gate_aclk_l2mem_con", + "gate_aclk_intmem", "gate_pclk_tsadc", + "gate_hclk_hdmi"; + + #clock-cells = <1>; + }; + + clk_gates5: gate-clk@200000e4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e4 0x4>; + clocks = <&clk_gates0 3>, <&clk_gates2 1>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 4>, <&clk_gates0 5>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates4 5>, + <&clk_gates4 5>, <&dummy>; + + clock-output-names = + "gate_aclk_dmac1", "gate_aclk_dmac2", + "gate_pclk_efuse", "gate_pclk_tzpc", + "gate_pclk_grf", "gate_pclk_pmu", + "gate_hclk_rom", "gate_pclk_ddrupctl", + "gate_aclk_smc", "gate_hclk_nandc", + "gate_hclk_mmc0", "gate_hclk_mmc1", + "gate_hclk_emmc", "gate_hclk_otg0", + "gate_hclk_otg1", "gate_aclk_gpu"; + + #clock-cells = <1>; + }; + + clk_gates6: gate-clk@200000e8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e8 0x4>; + clocks = <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_aclk_lcdc0", "gate_hclk_lcdc0", + "gate_hclk_lcdc1", "gate_aclk_lcdc1", + "gate_hclk_cif0", "gate_aclk_cif0", + "gate_hclk_cif1", "gate_aclk_cif1", + "gate_aclk_ipp", "gate_hclk_ipp", + "gate_hclk_rga", "gate_aclk_rga", + "gate_hclk_vio_bus", "gate_aclk_vio0", + "gate_aclk_vcodec", "gate_shclk_vio_h2h"; + + #clock-cells = <1>; + }; + + clk_gates7: gate-clk@200000ec { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000ec 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>; + + clock-output-names = + "gate_hclk_emac", "gate_hclk_spdif", + "gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch", + "gate_hclk_i2s_8ch", "gate_hclk_hsadc", + "gate_hclk_pidf", "gate_pclk_timer0", + "gate_pclk_timer1", "gate_pclk_timer2", + "gate_pclk_pwm01", "gate_pclk_pwm23", + "gate_pclk_spi0", "gate_pclk_spi1", + "gate_pclk_saradc", "gate_pclk_wdt"; + + #clock-cells = <1>; + }; + + clk_gates8: gate-clk@200000f0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f0 0x4>; + clocks = <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&dummy>, <&clk_gates0 5>; + + clock-output-names = + "gate_pclk_uart0", "gate_pclk_uart1", + "gate_pclk_uart2", "gate_pclk_uart3", + "gate_pclk_i2c0", "gate_pclk_i2c1", + "gate_pclk_i2c2", "gate_pclk_i2c3", + "gate_pclk_i2c4", "gate_pclk_gpio0", + "gate_pclk_gpio1", "gate_pclk_gpio2", + "gate_pclk_gpio3", "gate_pclk_gpio4", + "reserved", "gate_pclk_gpio6"; + + #clock-cells = <1>; + }; + + clk_gates9: gate-clk@200000f4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f4 0x4>; + clocks = <&dummy>, <&clk_gates0 5>, + <&dummy>, <&dummy>, + <&dummy>, <&clk_gates1 4>, + <&clk_gates0 5>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>; + + clock-output-names = + "gate_clk_core_dbg", "gate_pclk_dbg", + "gate_clk_trace", "gate_atclk", + "gate_clk_l2c", "gate_aclk_vio1", + "gate_pclk_publ", "gate_aclk_intmem0", + "gate_aclk_intmem1", "gate_aclk_intmem2", + "gate_aclk_intmem3"; + + #clock-cells = <1>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi new file mode 100644 index 000000000000..56bfac93d3f6 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -0,0 +1,390 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "skeleton.dtsi" +#include "rk3066a-clocks.dtsi" + +/ { + compatible = "rockchip,rk3066a"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x1>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@1013d000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1013d000 0x1000>, + <0x1013c100 0x0100>; + }; + + L2: l2-cache-controller@10138000 { + compatible = "arm,pl310-cache"; + reg = <0x10138000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer@1013c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1013c600 0x20>; + interrupts = <GIC_PPI 13 0x304>; + clocks = <&dummy150m>; + }; + + timer@20038000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x20038000 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates1 0>, <&clk_gates7 7>; + clock-names = "timer", "pclk"; + }; + + timer@2003a000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2003a000 0x100>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates1 1>, <&clk_gates7 8>; + clock-names = "timer", "pclk"; + }; + + timer@2000e000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2000e000 0x100>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates1 2>, <&clk_gates7 9>; + clock-names = "timer", "pclk"; + }; + + pinctrl@20008000 { + compatible = "rockchip,rk3066a-pinctrl"; + reg = <0x20008000 0x150>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 10>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 11>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 12>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 13>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio6@2000a000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2000a000 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 15>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg_pull_default { + bias-pull-pin-default; + }; + + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_cmd: sd0-cmd { + rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_cd: sd0-cd { + rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_wp: sd0-wp { + rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_bus1: sd0-bus-width1 { + rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd0_bus4: sd0-bus-width4 { + rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_cmd: sd1-cmd { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_cd: sd1-cd { + rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_wp: sd1-wp { + rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_bus1: sd1-bus-width1 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + + sd1_bus4: sd1-bus-width4 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; + rockchip,config = <&pcfg_pull_default>; + }; + }; + }; + + uart0: serial@10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 8>; + status = "disabled"; + }; + + uart1: serial@10126000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10126000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 10>; + status = "disabled"; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 12>; + status = "disabled"; + }; + + uart3: serial@20068000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20068000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 14>; + status = "disabled"; + }; + + dwmmc@10214000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10214000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 10>, <&clk_gates2 11>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + dwmmc@10218000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10218000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 11>, <&clk_gates2 13>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5000e0d42849..d5922935523f 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D3 family SoC"; @@ -59,7 +62,7 @@ mmc0: mmc@f0000000 { compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -74,7 +77,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -83,7 +86,7 @@ ssc0: ssc@f0008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; - interrupts = <38 4 4>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -92,7 +95,7 @@ can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; - interrupts = <40 4 3>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; status = "disabled"; @@ -101,13 +104,13 @@ tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@f0014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; - interrupts = <18 4 6>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 7>, <&dma0 2 8>; dma-names = "tx", "rx"; @@ -121,7 +124,7 @@ i2c1: i2c@f0018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; - interrupts = <19 4 6>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 9>, <&dma0 2 10>; dma-names = "tx", "rx"; @@ -135,7 +138,7 @@ usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -144,7 +147,7 @@ usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; - interrupts = <13 4 5>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -153,7 +156,7 @@ macb0: ethernet@f0028000 { compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; - interrupts = <34 4 3>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; status = "disabled"; @@ -162,14 +165,14 @@ isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; - interrupts = <37 4 5>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; status = "disabled"; }; mmc1: mmc@f8000000 { compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; - interrupts = <22 4 0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -182,7 +185,7 @@ mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; - interrupts = <23 4 0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 1>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -197,7 +200,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -206,7 +209,7 @@ ssc1: ssc@f800c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; - interrupts = <39 4 4>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -215,7 +218,7 @@ can1: can@f8010000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf8010000 0x300>; - interrupts = <41 4 3>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; }; @@ -223,13 +226,13 @@ tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8014000 0x100>; - interrupts = <27 4 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; }; adc0: adc@f8018000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf8018000 0x100>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = < &pinctrl_adc0_adtrg @@ -283,7 +286,7 @@ tsadcc: tsadcc@f8018000 { compatible = "atmel,at91sam9x5-tsadcc"; reg = <0xf8018000 0x4000>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; atmel,tsadcc_clock = <300000>; atmel,filtering_average = <0x03>; atmel,pendet_debounce = <0x08>; @@ -295,7 +298,7 @@ i2c2: i2c@f801c000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; - interrupts = <20 4 6>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 2 11>, <&dma1 2 12>; dma-names = "tx", "rx"; @@ -307,7 +310,7 @@ usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -316,7 +319,7 @@ usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -325,7 +328,7 @@ macb1: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <35 4 3>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; status = "disabled"; @@ -334,7 +337,7 @@ sha@f8034000 { compatible = "atmel,sam9g46-sha"; reg = <0xf8034000 0x100>; - interrupts = <42 4 0>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes@f8038000 { @@ -346,20 +349,20 @@ tdes@f803c000 { compatible = "atmel,sam9g46-tdes"; reg = <0xf803c000 0x100>; - interrupts = <44 4 0>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; - interrupts = <30 4 0>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; - interrupts = <31 4 0>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -371,7 +374,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <2 4 7>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -403,202 +406,202 @@ adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = - <3 19 0x1 0x0>; /* PD19 periph A ADTRG */ + <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = - <3 20 0x1 0x0>; /* PD20 periph A AD0 */ + <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = - <3 21 0x1 0x0>; /* PD21 periph A AD1 */ + <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = - <3 22 0x1 0x0>; /* PD22 periph A AD2 */ + <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = - <3 23 0x1 0x0>; /* PD23 periph A AD3 */ + <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = - <3 24 0x1 0x0>; /* PD24 periph A AD4 */ + <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ }; pinctrl_adc0_ad5: adc0_ad5 { atmel,pins = - <3 25 0x1 0x0>; /* PD25 periph A AD5 */ + <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ }; pinctrl_adc0_ad6: adc0_ad6 { atmel,pins = - <3 26 0x1 0x0>; /* PD26 periph A AD6 */ + <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ }; pinctrl_adc0_ad7: adc0_ad7 { atmel,pins = - <3 27 0x1 0x0>; /* PD27 periph A AD7 */ + <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ }; pinctrl_adc0_ad8: adc0_ad8 { atmel,pins = - <3 28 0x1 0x0>; /* PD28 periph A AD8 */ + <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ }; pinctrl_adc0_ad9: adc0_ad9 { atmel,pins = - <3 29 0x1 0x0>; /* PD29 periph A AD9 */ + <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ }; pinctrl_adc0_ad10: adc0_ad10 { atmel,pins = - <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */ + <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ }; pinctrl_adc0_ad11: adc0_ad11 { atmel,pins = - <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */ + <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ }; }; can0 { pinctrl_can0_rx_tx: can0_rx_tx { atmel,pins = - <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ - 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ }; }; can1 { pinctrl_can1_rx_tx: can1_rx_tx { atmel,pins = - <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */ - 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */ + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 30 0x1 0x0 /* PB30 periph A */ - 1 31 0x1 0x1>; /* PB31 periph A with pullup */ + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ - 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ - 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; }; isi { pinctrl_isi: isi-0 { atmel,pins = - <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ - 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ - 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ - 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ - 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ - 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ - 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ - 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ - 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ - 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ - 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ - 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ - 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ }; pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { atmel,pins = - <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */ + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ }; }; lcd { pinctrl_lcd: lcd-0 { atmel,pins = - <0 24 0x1 0x0 /* PA24 periph A LCDPWM */ - 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */ - 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */ - 0 25 0x1 0x0 /* PA25 periph A LCDDISP */ - 0 29 0x1 0x0 /* PA29 periph A LCDDEN */ - 0 28 0x1 0x0 /* PA28 periph A LCDPCK */ - 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */ - 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */ - 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */ - 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */ - 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */ - 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */ - 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */ - 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */ - 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */ - 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */ - 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */ - 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */ - 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */ - 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */ - 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */ - 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */ - 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */ - 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */ - 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */ - 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */ - 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */ - 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */ - 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */ - 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ }; }; macb0 { pinctrl_macb0_data_rgmii: macb0_data_rgmii { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */ - 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */ - 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */ - 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */ - 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */ - 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */ - 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */ - 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ }; pinctrl_macb0_data_gmii: macb0_data_gmii { atmel,pins = - <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */ - 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ - 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ - 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ - 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ - 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */ - 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */ - 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */ + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ }; pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */ - 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 18 0x1 0x0>; /* PB18 periph A G125CK */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ }; pinctrl_macb0_signal_gmii: macb0_signal_gmii { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */ - 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 27 0x2 0x0>; /* PB27 periph B G125CKO */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ }; }; @@ -606,252 +609,251 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */ - 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */ - 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */ - 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */ - 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */ - 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */ - 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */ - 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */ - 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */ - 2 9 0x1 0x0>; /* PC9 periph A EMDIO */ + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ }; }; mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = - <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */ - 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */ - 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */ + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ + AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */ - 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */ - 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ }; pinctrl_mmc0_dat4_7: mmc0_dat4_7 { atmel,pins = - <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ - 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ - 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ - 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ }; }; mmc1 { pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */ - 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ - 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ }; pinctrl_mmc1_dat1_3: mmc1_dat1_3 { atmel,pins = - <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ - 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ - 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ }; }; mmc2 { pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { atmel,pins = - <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */ - 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */ - 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */ + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = - <4 21 0x1 0x1 /* PE21 periph A with pullup */ - 4 22 0x1 0x1>; /* PE22 periph A with pullup */ + <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ }; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <6 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioB: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <7 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioC: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <8 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioD: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <9 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioE: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <10 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */ - 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */ - 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */ - 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */ - 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */ - 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */ - 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */ + <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx { atmel,pins = - <2 16 0x1 0x0 /* PC16 periph A TK0 */ - 2 17 0x1 0x0 /* PC17 periph A TF0 */ - 2 18 0x1 0x0>; /* PC18 periph A TD0 */ + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ }; pinctrl_ssc0_rx: ssc0_rx { atmel,pins = - <2 19 0x1 0x0 /* PC19 periph A RK0 */ - 2 20 0x1 0x0 /* PC20 periph A RF0 */ - 2 21 0x1 0x0>; /* PC21 periph A RD0 */ + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx { atmel,pins = - <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */ - 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */ - 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ + AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ + AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ }; pinctrl_ssc1_rx: ssc1_rx { atmel,pins = - <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */ - 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */ - 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */ + <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ + AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <3 17 0x1 0x0 /* PD17 periph A */ - 3 18 0x1 0x1>; /* PD18 periph A with pullup */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ }; pinctrl_usart0_rts_cts: usart0_rts_cts-0 { atmel,pins = - <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ - 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 28 0x1 0x0 /* PB28 periph A */ - 1 29 0x1 0x1>; /* PB29 periph A with pullup */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ }; pinctrl_usart1_rts_cts: usart1_rts_cts-0 { atmel,pins = - <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */ - 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */ - 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */ + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ }; pinctrl_usart2_rts_cts: usart2_rts_cts-0 { atmel,pins = - <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */ - 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */ + <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ + AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */ - 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */ + <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ + AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ }; pinctrl_usart3_rts_cts: usart3_rts_cts-0 { atmel,pins = - <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */ - 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */ + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ }; }; + + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmc: pmc@fffffc00 { @@ -867,7 +869,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <3 4 5>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; }; watchdog@fffffe40 { @@ -879,7 +881,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; }; @@ -889,7 +891,7 @@ compatible = "atmel,at91sam9rl-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; - interrupts = <33 4 2>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; ep0 { @@ -1001,14 +1003,14 @@ usb1: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb2: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; @@ -1024,7 +1026,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; - interrupts = <5 4 6>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index fa5d216f1db7..027bac7510b6 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D31-EK"; @@ -41,7 +41,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index c38c9433d7a5..99bd0c8e0471 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D33-EK"; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 6bebfcdcb1d1..fb8ee11cf282 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D34-EK"; @@ -51,7 +51,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index a488fc4e9777..509a53d9cc7b 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" +#include "sama5d3xmb.dtsi" / { model = "Atmel SAMA5D35-EK"; @@ -48,7 +48,7 @@ pb_user1 { label = "pb_user1"; - gpios = <&pioE 27 0>; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index b336e7787cb3..1f8050813a54 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3.dtsi" +#include "sama5d3.dtsi" / { compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -89,7 +89,7 @@ d2 { label = "d2"; - gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 4b8830eb2060..1c296d6b2f2a 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -33,7 +33,7 @@ board { pinctrl_qt1070_irq: qt1070_irq { atmel,pins = - <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 661d7ca9c309..8a9e05d8a4b8 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3xcm.dtsi" +#include "sama5d3xcm.dtsi" / { compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -20,7 +20,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 17 0>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; }; }; @@ -62,7 +62,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 18 0>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; }; }; @@ -87,32 +87,32 @@ board { pinctrl_mmc0_cd: mmc0_cd { atmel,pins = - <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = - <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = - <3 30 0x2 0x0>; /* PD30 periph B */ + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ }; pinctrl_isi_reset: isi_reset-0 { atmel,pins = - <4 24 0x0 0x0>; /* PE24 gpio */ + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ }; pinctrl_isi_power: isi_power-0 { atmel,pins = - <4 29 0x0 0x0>; /* PE29 gpio */ + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ }; pinctrl_usba_vbus: usba_vbus { atmel,pins = - <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ }; }; }; @@ -127,7 +127,7 @@ }; usb0: gadget@00500000 { - atmel,vbus-gpio = <&pioD 29 0>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -135,9 +135,9 @@ usb1: ohci@00600000 { num-ports = <3>; - atmel,vbus-gpio = <&pioD 25 0 - &pioD 26 1 - &pioD 27 1 + atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH + &pioD 26 GPIO_ACTIVE_LOW + &pioD 27 GPIO_ACTIVE_LOW >; status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts new file mode 100644 index 000000000000..8a1032c1ffc9 --- /dev/null +++ b/arch/arm/boot/dts/ste-u300.dts @@ -0,0 +1,473 @@ +/* + * Device Tree for the ST-Ericsson U300 Machine and SoC + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "ST-Ericsson U300"; + compatible = "stericsson,u300"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk"; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory { + reg = <0x48000000 0x03c00000>; + }; + + s365 { + compatible = "stericsson,s365"; + vana15-supply = <&ab3100_ldo_d_reg>; + syscon = <&syscon>; + }; + + syscon: syscon@c0011000 { + compatible = "stericsson,u300-syscon", "syscon"; + reg = <0xc0011000 0x1000>; + clk32: app_32_clk@32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + pll13: pll13@13M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + /* Slow bridge clocks under PLL13 */ + slow_clk: slow_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <0>; + clocks = <&pll13>; + }; + uart0_clk: uart0_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <1>; + clocks = <&slow_clk>; + }; + gpio_clk: gpio_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <4>; + clocks = <&slow_clk>; + }; + rtc_clk: rtc_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <6>; + clocks = <&slow_clk>; + }; + apptimer_clk: app_tmr_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <7>; + clocks = <&slow_clk>; + }; + acc_tmr_clk@13M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <0>; /* Slow */ + clock-id = <8>; + clocks = <&slow_clk>; + }; + pll208: pll208@208M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <208000000>; + }; + app208: app_208_clk@208M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&pll208>; + }; + cpu_clk@208M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <3>; + clocks = <&app208>; + }; + app104: app_104_clk@104M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&pll208>; + }; + semi_clk@104M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <9>; + clocks = <&app104>; + }; + app52: app_52_clk@52M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll208>; + }; + /* AHB subsystem clocks */ + ahb_clk: ahb_subsys_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <10>; + clocks = <&app52>; + }; + intcon_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <12>; + clocks = <&ahb_clk>; + }; + emif_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <5>; + clocks = <&ahb_clk>; + }; + dmac_clk: dmac_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <4>; + clocks = <&app52>; + }; + fsmc_clk: fsmc_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <6>; + clocks = <&app52>; + }; + xgam_clk: xgam_clk@52M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <2>; /* Rest */ + clock-id = <8>; + clocks = <&app52>; + }; + app26: app_26_clk@26M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&app52>; + }; + /* Fast bridge clocks */ + fast_clk: fast_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <0>; + clocks = <&app26>; + }; + i2c0_clk: i2c0_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <1>; + clocks = <&fast_clk>; + }; + i2c1_clk: i2c1_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <2>; + clocks = <&fast_clk>; + }; + mmc_pclk: mmc_p_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <5>; + clocks = <&fast_clk>; + }; + mmc_mclk: mmc_mclk { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-mclk"; + clocks = <&mmc_pclk>; + }; + spi_clk: spi_p_clk@26M { + #clock-cells = <0>; + compatible = "stericsson,u300-syscon-clk"; + clock-type = <1>; /* Fast */ + clock-id = <6>; + clocks = <&fast_clk>; + }; + }; + + timer: timer@c0014000 { + compatible = "stericsson,u300-apptimer"; + reg = <0xc0014000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <24 25 26 27>; + clocks = <&apptimer_clk>; + }; + + gpio: gpio@c0016000 { + compatible = "stericsson,gpio-coh901"; + reg = <0xc0016000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <0 1 2 18 21 22 23>; + clocks = <&gpio_clk>; + interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@c0011000 { + compatible = "stericsson,pinctrl-u300"; + reg = <0xc0011000 0x1000>; + }; + + watchdog: watchdog@c0012000 { + compatible = "stericsson,coh901327"; + reg = <0xc0012000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <3>; + clocks = <&clk32>; + }; + + rtc: rtc@c0017000 { + compatible = "stericsson,coh901331"; + reg = <0xc0017000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <10>; + clocks = <&rtc_clk>; + }; + + dmac: dma-controller@c00020000 { + compatible = "stericsson,coh901318"; + reg = <0xc0020000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <2>; + #dma-cells = <1>; + dma-channels = <40>; + clocks = <&dmac_clk>; + }; + + /* A NAND flash of 128 MiB */ + fsmc: flash@40000000 { + compatible = "stericsson,fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x9f800000 0x1000>, /* FSMC Register*/ + <0x80000000 0x4000>, /* NAND Base DATA */ + <0x80020000 0x4000>, /* NAND Base ADDR */ + <0x80010000 0x4000>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + nand-skip-bbtscan; + clocks = <&fsmc_clk>; + + partition@0 { + label = "boot records"; + reg = <0x0 0x20000>; + }; + partition@20000 { + label = "free"; + reg = <0x20000 0x7e0000>; + }; + partition@800000 { + label = "platform"; + reg = <0x800000 0xf800000>; + }; + }; + + i2c0: i2c@c0004000 { + compatible = "st,ddci2c"; + reg = <0xc0004000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <8>; + clocks = <&i2c0_clk>; + #address-cells = <1>; + #size-cells = <0>; + ab3100: ab3100@0x48 { + compatible = "stericsson,ab3100"; + reg = <0x48>; + interrupt-parent = <&vica>; + interrupts = <0>; /* EXT0 IRQ */ + ab3100-regulators { + compatible = "stericsson,ab3100-regulators"; + ab3100_ldo_a_reg: ab3100_ldo_a { + regulator-compatible = "ab3100_ldo_a"; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_c_reg: ab3100_ldo_c { + regulator-compatible = "ab3100_ldo_c"; + startup-delay-us = <200>; + }; + ab3100_ldo_d_reg: ab3100_ldo_d { + regulator-compatible = "ab3100_ldo_d"; + startup-delay-us = <200>; + }; + ab3100_ldo_e_reg: ab3100_ldo_e { + regulator-compatible = "ab3100_ldo_e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <200>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_f_reg: ab3100_ldo_f { + regulator-compatible = "ab3100_ldo_f"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + startup-delay-us = <600>; + regulator-always-on; + regulator-boot-on; + }; + ab3100_ldo_g_reg: ab3100_ldo_g { + regulator-compatible = "ab3100_ldo_g"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2850000>; + startup-delay-us = <400>; + }; + ab3100_ldo_h_reg: ab3100_ldo_h { + regulator-compatible = "ab3100_ldo_h"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ldo_k_reg: ab3100_ldo_k { + regulator-compatible = "ab3100_ldo_k"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2750000>; + startup-delay-us = <200>; + }; + ab3100_ext_reg: ab3100_ext { + regulator-compatible = "ab3100_ext"; + }; + ab3100_buck_reg: ab3100_buck { + regulator-compatible = "ab3100_buck"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <1000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + i2c1: i2c@c0005000 { + compatible = "st,ddci2c"; + reg = <0xc0005000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <9>; + clocks = <&i2c1_clk>; + #address-cells = <1>; + #size-cells = <0>; + fwcam0: fwcam@0x10 { + reg = <0x10>; + }; + fwcam1: fwcam@0x5d { + reg = <0x5d>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vica: interrupt-controller@a0001000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0001000 0x20>; + }; + + vicb: interrupt-controller@a0002000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0002000 0x20>; + }; + + uart0: serial@c0013000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0013000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <22>; + clocks = <&uart0_clk>, <&uart0_clk>; + clock-names = "apb_pclk", "uart0_clk"; + dmas = <&dmac 17 &dmac 18>; + dma-names = "tx", "rx"; + }; + + uart1: serial@c0007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0007000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <20>; + dmas = <&dmac 38 &dmac 39>; + dma-names = "tx", "rx"; + }; + + mmcsd: mmcsd@c0001000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0xc0001000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <6 7>; + clocks = <&mmc_pclk>, <&mmc_mclk>; + clock-names = "apb_pclk", "mclk"; + max-frequency = <24000000>; + bus-width = <4>; // SD-card slot + mmc-cap-mmc-highspeed; + mmc-cap-sd-highspeed; + cd-gpios = <&gpio 12 0x4>; + cd-inverted; + vmmc-supply = <&ab3100_ldo_g_reg>; + dmas = <&dmac 14>; + dma-names = "rx"; + }; + + spi: ssp@c0006000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xc0006000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <23>; + clocks = <&spi_clk>, <&spi_clk>; + clock-names = "apb_pclk", "spi_clk"; + dmas = <&dmac 27 &dmac 28>; + dma-names = "tx", "rx"; + num-cs = <3>; + #address-cells = <1>; + #size-cells = <0>; + spi-dummy@1 { + compatible = "arm,pl022-dummy"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index a573b94b7c93..c12af78e479c 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -449,7 +449,11 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; sdhci@c8000600 { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index e7d5de4e00b9..ec5293758753 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -428,17 +428,26 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000200 { diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 52f1103907d7..9f64f7086881 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -38,13 +38,20 @@ usb@c5000000 { status = "okay"; - dr_mode = "otg"; + }; + + usb-phy@c5000000 { + status = "okay"; }; usb@c5008000 { status = "okay"; }; + usb-phy@c5008000 { + status = "okay"; + }; + serial@70006000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index e3e0c9977df4..1c17ffaff1ad 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -427,17 +427,26 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index cee4c34010fe..009dafecf88b 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -569,17 +569,28 @@ dr_mode = "otg"; }; + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus_reg>; + dr_mode = "otg"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { @@ -807,6 +818,15 @@ gpio = <&pmic 1 0>; enable-active-high; }; + + vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_vbus_wup1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 24 0>; /* PD0 */ + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 50b3ec16b93a..fc2f7d6e70b2 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -470,6 +470,10 @@ status = "okay"; }; + usb-phy@c5008000 { + status = "okay"; + }; + sdhci@c8000600 { cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9cc78a15d739..0e65c00ec732 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -314,17 +314,27 @@ nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ }; + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus_reg>; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { @@ -390,6 +400,15 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + + vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 170 0>; /* PV2 */ + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index dd38f1f03834..e00f89e645f9 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -505,17 +505,26 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index d2567f83aaff..3c24c9b92b44 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -511,11 +511,21 @@ nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ }; + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus1_reg>; + }; + usb@c5008000 { status = "okay"; nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ }; + usb-phy@c5008000 { + status = "okay"; + vbus-supply = <&vbus3_reg>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 1>; /* gpio PI5 */ @@ -568,6 +578,24 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + vbus1_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + }; + + vbus3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vbus3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 56a91106041b..96d6d8a3aa72 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -455,13 +455,24 @@ status = "disabled"; }; - phy1: usb-phy@c5000400 { + phy1: usb-phy@c5000000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5000400 0x3c00>; + reg = <0xc5000000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; + clocks = <&tegra_car 22>, + <&tegra_car 127>, + <&tegra_car 106>, + <&tegra_car 22>; + clock-names = "reg", "pll_u", "timer", "utmi-pads"; nvidia,has-legacy-mode; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + hssync_start_delay = <9>; + idle_wait_delay = <17>; + elastic_limit = <16>; + term_range_adj = <6>; + xcvr_setup = <9>; + xcvr_lsfslew = <1>; + xcvr_lsrslew = <1>; + status = "disabled"; }; usb@c5004000 { @@ -474,12 +485,15 @@ status = "disabled"; }; - phy2: usb-phy@c5004400 { + phy2: usb-phy@c5004000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5004400 0x3c00>; + reg = <0xc5004000 0x4000>; phy_type = "ulpi"; - clocks = <&tegra_car 93>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + clocks = <&tegra_car 58>, + <&tegra_car 127>, + <&tegra_car 93>; + clock-names = "reg", "pll_u", "ulpi-link"; + status = "disabled"; }; usb@c5008000 { @@ -492,12 +506,23 @@ status = "disabled"; }; - phy3: usb-phy@c5008400 { + phy3: usb-phy@c5008000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5008400 0x3c00>; + reg = <0xc5008000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + clocks = <&tegra_car 59>, + <&tegra_car 127>, + <&tegra_car 106>, + <&tegra_car 22>; + clock-names = "reg", "pll_u", "timer", "utmi-pads"; + hssync_start_delay = <9>; + idle_wait_delay = <17>; + elastic_limit = <16>; + term_range_adj = <6>; + xcvr_setup = <9>; + xcvr_lsfslew = <2>; + xcvr_lsrslew = <2>; + status = "disabled"; }; sdhci@c8000000 { diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts index 367a16dcd5ef..dabe232216b4 100644 --- a/arch/arm/boot/dts/tny_a9260.dts +++ b/arch/arm/boot/dts/tny_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9260"; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index dee9c571306b..0751a6a979a8 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao TNY A9263"; @@ -38,7 +38,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts index e1ab64c72dba..8456d70bb42b 100644 --- a/arch/arm/boot/dts/tny_a9g20.dts +++ b/arch/arm/boot/dts/tny_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9G20"; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index 296216058c11..a604107eb474 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9260"; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index e70d229baef5..285977682cf3 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -30,7 +30,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -93,7 +93,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; @@ -105,7 +105,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 6fe05ccb6203..f8ec36cb036b 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao USB A9263"; @@ -43,7 +43,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -107,7 +107,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 0>; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -119,7 +119,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi index ad3eca17c436..5b0ffc1a0b24 100644 --- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -28,39 +28,39 @@ user_led1 { label = "user_led1"; - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; }; /* * led already used by mother board but active as high * user_led2 { * label = "user_led2"; -* gpios = <&pioB 21 1>; +* gpios = <&pioB 21 GPIO_ACTIVE_LOW>; * }; */ user_led3 { label = "user_led3"; - gpios = <&pioB 22 1>; + gpios = <&pioB 22 GPIO_ACTIVE_LOW>; }; user_led4 { label = "user_led4"; - gpios = <&pioB 23 1>; + gpios = <&pioB 23 GPIO_ACTIVE_LOW>; }; red { label = "red"; - gpios = <&pioB 24 1>; + gpios = <&pioB 24 GPIO_ACTIVE_LOW>; }; orange { label = "orange"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; }; green { label = "green"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; }; }; @@ -71,25 +71,25 @@ user_pb1 { label = "user_pb1"; - gpios = <&pioB 25 1>; + gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; user_pb2 { label = "user_pb2"; - gpios = <&pioB 13 1>; + gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; user_pb3 { label = "user_pb3"; - gpios = <&pioA 26 1>; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; user_pb4 { label = "user_pb4"; - gpios = <&pioC 9 1>; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 2dacb16ce4ae..c979c06cf697 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9G20"; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 14fb2e609bab..0dbee2c23905 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -49,16 +49,18 @@ uart0: uart@e0000000 { compatible = "xlnx,xuartps"; + clocks = <&clkc 23>, <&clkc 40>; + clock-names = "ref_clk", "aper_clk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; - clocks = <&uart_clk 0>; }; uart1: uart@e0001000 { compatible = "xlnx,xuartps"; + clocks = <&clkc 24>, <&clkc 41>; + clock-names = "ref_clk", "aper_clk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; - clocks = <&uart_clk 1>; }; slcr: slcr@f8000000 { @@ -69,50 +71,21 @@ #address-cells = <1>; #size-cells = <0>; - ps_clk: ps_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - /* clock-frequency set in board-specific file */ - clock-output-names = "ps_clk"; - }; - armpll: armpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x100 0x110>; - clock-output-names = "armpll"; - }; - ddrpll: ddrpll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x104 0x114>; - clock-output-names = "ddrpll"; - }; - iopll: iopll { - #clock-cells = <0>; - compatible = "xlnx,zynq-pll"; - clocks = <&ps_clk>; - reg = <0x108 0x118>; - clock-output-names = "iopll"; - }; - uart_clk: uart_clk { - #clock-cells = <1>; - compatible = "xlnx,zynq-periph-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x154>; - clock-output-names = "uart0_ref_clk", - "uart1_ref_clk"; - }; - cpu_clk: cpu_clk { + clkc: clkc { #clock-cells = <1>; - compatible = "xlnx,zynq-cpu-clock"; - clocks = <&iopll &armpll &ddrpll>; - reg = <0x120 0x1C4>; - clock-output-names = "cpu_6x4x", - "cpu_3x2x", - "cpu_2x", - "cpu_1x"; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; }; }; }; @@ -121,9 +94,8 @@ interrupt-parent = <&intc>; interrupts = < 0 10 4 0 11 4 0 12 4 >; compatible = "cdns,ttc"; + clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; - clocks = <&cpu_clk 3>; - clock-names = "cpu_1x"; clock-ranges; }; @@ -131,9 +103,8 @@ interrupt-parent = <&intc>; interrupts = < 0 37 4 0 38 4 0 39 4 >; compatible = "cdns,ttc"; + clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; - clocks = <&cpu_clk 3>; - clock-names = "cpu_1x"; clock-ranges; }; scutimer: scutimer@f8f00600 { @@ -141,7 +112,7 @@ interrupts = < 1 13 0x301 >; compatible = "arm,cortex-a9-twd-timer"; reg = < 0xf8f00600 0x20 >; - clocks = <&cpu_clk 1>; + clocks = <&clkc 4>; } ; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 86f44d5b0265..e25a307438ad 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -28,7 +28,3 @@ }; }; - -&ps_clk { - clock-frequency = <33333330>; -}; |