diff options
Diffstat (limited to 'arch/arm/boot')
56 files changed, 97 insertions, 60 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1b81c4e75772..d37f95025807 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -630,6 +630,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -678,6 +679,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb1: usb@47401800 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index e5b061469bf8..4714a59fd86d 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -927,7 +927,8 @@ reg = <0x48038000 0x2000>, <0x46000000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <80>, <81>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8 2>, @@ -941,7 +942,8 @@ reg = <0x4803C000 0x2000>, <0x46400000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <82>, <83>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10 2>, diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 9e92d480576b..3b9a94c274a7 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -301,8 +301,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - dmas = <&edma 16 - &edma 17>; + dmas = <&edma 16 0 + &edma 17 0>; dma-names = "tx0", "rx0"; flash: w25q64cvzpig@0 { diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 25d2d720dc0e..678aa023335d 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -236,6 +236,7 @@ usb3_phy: usb3_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_xhci0_vbus>; + #phy-cells = <0>; }; reg_xhci0_vbus: xhci0-vbus { diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index e1f355ffc8f7..434dc9aaa5e4 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -66,6 +66,7 @@ usb3_1_phy: usb3_1-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_1_vbus>; + #phy-cells = <0>; }; usb3_1_vbus: usb3_1-vbus { diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 36ad571e76f3..0a3552ebda3b 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -191,11 +191,13 @@ usb3_0_phy: usb3_0_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_0_vbus>; + #phy-cells = <0>; }; usb3_1_phy: usb3_1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_1_vbus>; + #phy-cells = <0>; }; reg_usb3_0_vbus: usb3-vbus0 { diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index f503955dbd3b..51b4ee6df130 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -276,11 +276,13 @@ usb2_1_phy: usb2_1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb2_1_vbus>; + #phy-cells = <0>; }; usb3_phy: usb3_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_usb3_vbus>; + #phy-cells = <0>; }; reg_usb3_vbus: usb3-vbus { diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 45d815a86d42..de08d9045cb8 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -219,7 +219,7 @@ compatible = "aspeed,ast2400-vuart"; reg = <0x1e787000 0x40>; reg-shift = <2>; - interrupts = <10>; + interrupts = <8>; clocks = <&clk_uart>; no-loopback-test; status = "disabled"; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 5f29010cdbd8..9b82cc8843e1 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -221,6 +221,7 @@ jc42@18 { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x18>; + smbus-timeout-disable; }; dpot: mcp4651-104@28 { diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 528b9e3bc1da..dcc55aa84583 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -85,7 +85,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; @@ -93,7 +93,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 013431e3d7c3..dcde93c85c2d 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -639,5 +639,6 @@ usbphy: phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 3bc50849d013..b8bde13de90a 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -141,10 +141,6 @@ status = "okay"; }; -&sata { - status = "okay"; -}; - &qspi { bspi-sel = <0>; flash: m25p80@0 { diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index d94d14b3c745..6a44b8021702 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -177,10 +177,6 @@ status = "okay"; }; -&sata { - status = "okay"; -}; - &srab { compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; status = "okay"; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 413dbd5d9f64..81942ae83e1f 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -178,7 +178,7 @@ */ battery { pinctrl-names = "default"; - pintctrl-0 = <&battery_pins>; + pinctrl-0 = <&battery_pins>; compatible = "lego,ev3-battery"; io-channels = <&adc 4>, <&adc 3>; io-channel-names = "voltage", "current"; @@ -392,7 +392,7 @@ batt_volt_en { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; - output-low; + output-high; }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 9708157f5daf..681f5487406e 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -75,6 +75,7 @@ reg = <0x47401300 0x100>; reg-names = "phy"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -385,6 +386,7 @@ reg = <0x1b00 0x100>; reg-names = "phy"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index b2b95ff205e8..0029ec27819c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -664,6 +664,10 @@ status = "okay"; }; +&mixer { + status = "okay"; +}; + /* eMMC flash */ &mmc_0 { status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 589a67c5f796..84f17f7abb71 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -433,15 +433,6 @@ clock-names = "ipg", "per"; }; - srtc: srtc@53fa4000 { - compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; - reg = <0x53fa4000 0x4000>; - interrupts = <24>; - interrupt-parent = <&tzic>; - clocks = <&clks IMX5_CLK_SRTC_GATE>; - clock-names = "ipg"; - }; - iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index 38faa90007d7..2fa5eb4bd402 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -72,7 +72,8 @@ }; &gpmc { - ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ + 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ ethernet@gpmc { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 26cce4d18405..29cb804d10cc 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -33,11 +33,12 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ + #phy-cells = <0>; }; }; &gpmc { - ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -121,7 +122,7 @@ &mmc3 { interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; - pinctrl-0 = <&mmc3_pins>; + pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; non-removable; @@ -132,8 +133,8 @@ wlcore: wlcore@2 { compatible = "ti,wl1273"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; @@ -157,8 +158,6 @@ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ - OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ - OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */ >; @@ -228,6 +227,12 @@ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; + wl127x_gpio: pinmux_wl127x_gpio_pin { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 940875316d0f..67b4de0e3439 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -215,7 +215,7 @@ reg = <0x2a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; }; }; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index a8b148ad1dd2..44715c8ef756 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -187,7 +187,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 4926133077b3..0d9faf1a51ea 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -85,15 +85,6 @@ reg = <0x7c00 0x200>; }; - gpio_intc: interrupt-controller@9880 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0xc1109880 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - hwrng: rng@8100 { compatible = "amlogic,meson-rng"; reg = <0x8100 0x8>; @@ -191,6 +182,15 @@ status = "disabled"; }; + gpio_intc: interrupt-controller@9880 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x9880 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + wdt: watchdog@9900 { compatible = "amlogic,meson6-wdt"; reg = <0x9900 0x8>; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index ec2283b1a638..1a5ae4cd107f 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -56,6 +56,7 @@ usb_phy: usb_phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; vbus_reg: vbus_reg { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 683b96a8f73e..0349fcc9dc26 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -90,6 +90,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; tfp410: encoder0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4d2eaf843fa9..3ca8991a6c3e 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -64,6 +64,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; sound { diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 31d5ebf38892..ab6003fe5a43 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -43,12 +43,14 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb1_power>; + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; ads7846reg: ads7846-reg { diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index dbc3f030a16c..ee64191e41ca 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -29,6 +29,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; leds { diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 4504908c23fe..3dc56fb156b7 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -120,6 +120,7 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + #phy-cells = <0>; }; tv0: connector { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 667f96245729..ecbec23af49f 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -58,6 +58,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */ vcc-supply = <&hsusb1_power>; + #phy-cells = <0>; }; tfp410: encoder { diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index e94d9427450c..443f71707437 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -37,6 +37,7 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 343a36d8031d..7ada1e93e166 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -51,6 +51,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; vcc-supply = <®_vcc3>; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index f25e158e7163..ac141fcd1742 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -51,6 +51,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; /* Regulator to trigger the nPoweron signal of the Wifi module */ diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 53e007abdc71..cd53dc6c0051 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -205,6 +205,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ vcc-supply = <&vaux2>; + #phy-cells = <0>; }; /* HS USB Host VBUS supply diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 9a601d15247b..6f5bd027b717 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -46,6 +46,7 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; }; sound { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 90b5c7148feb..bb33935df7b0 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -715,6 +715,7 @@ compatible = "ti,ohci-omap3"; reg = <0x48064400 0x400>; interrupts = <76>; + remote-wakeup-connected; }; usbhsehci: ehci@48064800 { diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 8b93d37310f2..24a463f8641f 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -73,6 +73,7 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; /* LCD regulator from sw5 source */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index 6e6810c258eb..eb123b24c8e3 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -43,6 +43,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + #phy-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&hsusb1phy_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 22c1eee9b07a..5501d1b4e6cd 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -89,6 +89,7 @@ hsusb1_phy: hsusb1_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + #phy-cells = <0>; vcc-supply = <&hsusb1_power>; clocks = <&auxclk3_ck>; clock-names = "main_clk"; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 6500bfc8d130..10fce28ceb5b 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -44,6 +44,7 @@ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ vcc-supply = <&vbat>; + #phy-cells = <0>; clocks = <&auxclk3_ck>; clock-names = "main_clk"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1dc5a76b3c71..cc1a07a3620f 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -398,7 +398,7 @@ elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0x2000>; - interrupts = <4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "elm"; status = "disabled"; }; @@ -1081,14 +1081,13 @@ usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 575ecffb0e9e..1b20838bb9a4 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -73,12 +73,14 @@ clocks = <&auxclk1_ck>; clock-names = "main_clk"; clock-frequency = <19200000>; + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + #phy-cells = <0>; }; tpd12s015: encoder { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 5b172a04b6f1..5e21fb430a65 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -63,12 +63,14 @@ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ + #phy-cells = <0>; }; /* HS USB Host PHY on PORT 3 */ hsusb3_phy: hsusb3_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */ + #phy-cells = <0>; }; leds { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4cd0005e462f..51a7fb3d7b9a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -940,6 +940,7 @@ compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; }; usbhsehci: ehci@4a064c00 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2f017fee4009..62baabd757b6 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1201,6 +1201,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; prr: chipid@ff000044 { diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 131f65b0426e..3d080e07374c 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -829,6 +829,7 @@ clock-names = "extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 58eae569b4e0..0cd1035de1a4 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1088,6 +1088,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 905e50c9b524..5643976c1356 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1099,6 +1099,7 @@ clock-names = "extal", "usb_extal"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index c6d92c25df42..d23ee6d911ac 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -83,6 +83,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cd24894ee5c6..6102e4e7f35c 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -956,7 +956,7 @@ iep_mmu: iommu@ff900800 { compatible = "rockchip,iommu"; reg = <0x0 0xff900800 0x0 0x40>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "iep_mmu"; #iommu-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b91300d49a31..5840f5c75c3b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -502,8 +502,8 @@ reg = <0x01c16000 0x1000>; interrupts = <58>; clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, - <&ccu 9>, - <&ccu 18>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "pll-0", "pll-1"; dmas = <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_NORMAL 16>, diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 6ae4d95e230e..316cb8b2945b 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -82,8 +82,8 @@ reg = <0x01c16000 0x1000>; interrupts = <58>; clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, - <&ccu 9>, - <&ccu 16>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "pll-0", "pll-1"; dmas = <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_NORMAL 16>, diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 8bfa12b548e0..72d3fe44ecaf 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -429,8 +429,8 @@ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu 7>, - <&ccu 13>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; resets = <&ccu RST_AHB1_HDMI>; reset-names = "ahb"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 68dfa82544fc..59655e42e4b0 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -581,8 +581,8 @@ reg = <0x01c16000 0x1000>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, - <&ccu 9>, - <&ccu 18>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "pll-0", "pll-1"; dmas = <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_NORMAL 16>, diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 98715538932f..a021ee6da396 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -146,6 +146,7 @@ status = "okay"; axp81x: pmic@3a3 { + compatible = "x-powers,axp813"; reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi index 0ec1b0a317b4..ff72a8efb73d 100644 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ b/arch/arm/boot/dts/tango4-common.dtsi @@ -156,7 +156,6 @@ reg = <0x6e000 0x400>; ranges = <0 0x6e000 0x400>; interrupt-parent = <&gic>; - interrupt-controller; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 02a6227c717c..4b8edc8982cf 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -121,7 +121,7 @@ switch0port10: port@10 { reg = <10>; label = "dsa"; - phy-mode = "xgmii"; + phy-mode = "xaui"; link = <&switch1port10>; }; }; @@ -208,7 +208,7 @@ switch1port10: port@10 { reg = <10>; label = "dsa"; - phy-mode = "xgmii"; + phy-mode = "xaui"; link = <&switch0port10>; }; }; @@ -359,7 +359,7 @@ }; &i2c1 { - at24mac602@0 { + at24mac602@50 { compatible = "atmel,24c02"; reg = <0x50>; read-only; |