summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-gemini/include/mach/global_reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-gemini/include/mach/global_reg.h')
-rw-r--r--arch/arm/mach-gemini/include/mach/global_reg.h278
1 files changed, 0 insertions, 278 deletions
diff --git a/arch/arm/mach-gemini/include/mach/global_reg.h b/arch/arm/mach-gemini/include/mach/global_reg.h
deleted file mode 100644
index de7ff7e849fc..000000000000
--- a/arch/arm/mach-gemini/include/mach/global_reg.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * This file contains the hardware definitions for Gemini.
- *
- * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_GLOBAL_REG_H
-#define __MACH_GLOBAL_REG_H
-
-/* Global Word ID Register*/
-#define GLOBAL_ID 0x00
-
-#define CHIP_ID(reg) ((reg) >> 8)
-#define CHIP_REVISION(reg) ((reg) & 0xFF)
-
-/* Global Status Register */
-#define GLOBAL_STATUS 0x04
-
-#define CPU_BIG_ENDIAN (1 << 31)
-#define PLL_OSC_30M (1 << 30) /* else 60MHz */
-
-#define OPERATION_MODE_MASK (0xF << 26)
-#define OPM_IDDQ (0xF << 26)
-#define OPM_NAND (0xE << 26)
-#define OPM_RING (0xD << 26)
-#define OPM_DIRECT_BOOT (0xC << 26)
-#define OPM_USB1_PHY_TEST (0xB << 26)
-#define OPM_USB0_PHY_TEST (0xA << 26)
-#define OPM_SATA1_PHY_TEST (0x9 << 26)
-#define OPM_SATA0_PHY_TEST (0x8 << 26)
-#define OPM_ICE_ARM (0x7 << 26)
-#define OPM_ICE_FARADAY (0x6 << 26)
-#define OPM_PLL_BYPASS (0x5 << 26)
-#define OPM_DEBUG (0x4 << 26)
-#define OPM_BURN_IN (0x3 << 26)
-#define OPM_MBIST (0x2 << 26)
-#define OPM_SCAN (0x1 << 26)
-#define OPM_REAL (0x0 << 26)
-
-#define FLASH_TYPE_MASK (0x3 << 24)
-#define FLASH_TYPE_NAND_2K (0x3 << 24)
-#define FLASH_TYPE_NAND_512 (0x2 << 24)
-#define FLASH_TYPE_PARALLEL (0x1 << 24)
-#define FLASH_TYPE_SERIAL (0x0 << 24)
-/* if parallel */
-#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */
-/* if serial */
-#define FLASH_ATMEL (1 << 23) /* else STM */
-
-#define FLASH_SIZE_MASK (0x3 << 21)
-#define NAND_256M (0x3 << 21) /* and more */
-#define NAND_128M (0x2 << 21)
-#define NAND_64M (0x1 << 21)
-#define NAND_32M (0x0 << 21)
-#define ATMEL_16M (0x3 << 21) /* and more */
-#define ATMEL_8M (0x2 << 21)
-#define ATMEL_4M_2M (0x1 << 21)
-#define ATMEL_1M (0x0 << 21) /* and less */
-#define STM_32M (1 << 22) /* and more */
-#define STM_16M (0 << 22) /* and less */
-
-#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */
-
-#define CPU_AHB_RATIO_MASK (0x3 << 18)
-#define CPU_AHB_1_1 (0x0 << 18)
-#define CPU_AHB_3_2 (0x1 << 18)
-#define CPU_AHB_24_13 (0x2 << 18)
-#define CPU_AHB_2_1 (0x3 << 18)
-
-#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
-#define AHB_SPEED_TO_REG(x) ((((x - 130)) / 10) << 15)
-
-/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
-#define OVERRIDE_FLASH_TYPE_SHIFT 16
-#define OVERRIDE_FLASH_WIDTH_SHIFT 16
-#define OVERRIDE_FLASH_SIZE_SHIFT 16
-#define OVERRIDE_CPU_AHB_RATIO_SHIFT 15
-#define OVERRIDE_AHB_SPEED_SHIFT 15
-
-/* Global PLL Control Register */
-#define GLOBAL_PLL_CTRL 0x08
-
-#define PLL_BYPASS (1 << 31)
-#define PLL_POWER_DOWN (1 << 8)
-#define PLL_CONTROL_Q (0x1F << 0)
-
-/* Global Soft Reset Control Register */
-#define GLOBAL_RESET 0x0C
-
-#define RESET_GLOBAL (1 << 31)
-#define RESET_CPU1 (1 << 30)
-#define RESET_TVE (1 << 28)
-#define RESET_SATA1 (1 << 27)
-#define RESET_SATA0 (1 << 26)
-#define RESET_CIR (1 << 25)
-#define RESET_EXT_DEV (1 << 24)
-#define RESET_WD (1 << 23)
-#define RESET_GPIO2 (1 << 22)
-#define RESET_GPIO1 (1 << 21)
-#define RESET_GPIO0 (1 << 20)
-#define RESET_SSP (1 << 19)
-#define RESET_UART (1 << 18)
-#define RESET_TIMER (1 << 17)
-#define RESET_RTC (1 << 16)
-#define RESET_INT1 (1 << 15)
-#define RESET_INT0 (1 << 14)
-#define RESET_LCD (1 << 13)
-#define RESET_LPC (1 << 12)
-#define RESET_APB (1 << 11)
-#define RESET_DMA (1 << 10)
-#define RESET_USB1 (1 << 9)
-#define RESET_USB0 (1 << 8)
-#define RESET_PCI (1 << 7)
-#define RESET_GMAC1 (1 << 6)
-#define RESET_GMAC0 (1 << 5)
-#define RESET_SECURITY (1 << 4)
-#define RESET_RAID (1 << 3)
-#define RESET_IDE (1 << 2)
-#define RESET_FLASH (1 << 1)
-#define RESET_DRAM (1 << 0)
-
-/* Global IO Pad Driving Capability Control Register */
-#define GLOBAL_IO_DRIVING_CTRL 0x10
-
-#define DRIVING_CURRENT_MASK 0x3
-
-/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
-#define GPIO1_PADS_31_28_SHIFT 28
-#define GPIO0_PADS_31_16_SHIFT 26
-#define GPIO0_PADS_15_0_SHIFT 24
-#define PCI_AND_EXT_RESET_PADS_SHIFT 22
-#define IDE_PADS_SHIFT 20
-#define GMAC1_PADS_SHIFT 18
-#define GMAC0_PADS_SHIFT 16
-/* DRAM is not in mA and poorly documented */
-#define DRAM_CLOCK_PADS_SHIFT 8
-#define DRAM_DATA_PADS_SHIFT 4
-#define DRAM_CONTROL_PADS_SHIFT 0
-
-/* Global IO Pad Slew Rate Control Register */
-#define GLOBAL_IO_SLEW_RATE_CTRL 0x14
-
-#define GPIO1_PADS_31_28_SLOW (1 << 10)
-#define GPIO0_PADS_31_16_SLOW (1 << 9)
-#define GPIO0_PADS_15_0_SLOW (1 << 8)
-#define PCI_PADS_SLOW (1 << 7)
-#define IDE_PADS_SLOW (1 << 6)
-#define GMAC1_PADS_SLOW (1 << 5)
-#define GMAC0_PADS_SLOW (1 << 4)
-#define DRAM_CLOCK_PADS_SLOW (1 << 1)
-#define DRAM_IO_PADS_SLOW (1 << 0)
-
-/*
- * General skew control defines
- * 16 steps, each step is around 0.2ns
- */
-#define SKEW_MASK 0xF
-
-/* Global IDE PAD Skew Control Register */
-#define GLOBAL_IDE_SKEW_CTRL 0x18
-
-#define IDE1_HOST_STROBE_DELAY_SHIFT 28
-#define IDE1_DEVICE_STROBE_DELAY_SHIFT 24
-#define IDE1_OUTPUT_IO_SKEW_SHIFT 20
-#define IDE1_INPUT_IO_SKEW_SHIFT 16
-#define IDE0_HOST_STROBE_DELAY_SHIFT 12
-#define IDE0_DEVICE_STROBE_DELAY_SHIFT 8
-#define IDE0_OUTPUT_IO_SKEW_SHIFT 4
-#define IDE0_INPUT_IO_SKEW_SHIFT 0
-
-/* Global GMAC Control Pad Skew Control Register */
-#define GLOBAL_GMAC_CTRL_SKEW_CTRL 0x1C
-
-#define GMAC1_TXC_SKEW_SHIFT 28
-#define GMAC1_TXEN_SKEW_SHIFT 24
-#define GMAC1_RXC_SKEW_SHIFT 20
-#define GMAC1_RXDV_SKEW_SHIFT 16
-#define GMAC0_TXC_SKEW_SHIFT 12
-#define GMAC0_TXEN_SKEW_SHIFT 8
-#define GMAC0_RXC_SKEW_SHIFT 4
-#define GMAC0_RXDV_SKEW_SHIFT 0
-
-/* Global GMAC0 Data PAD Skew Control Register */
-#define GLOBAL_GMAC0_DATA_SKEW_CTRL 0x20
-/* Global GMAC1 Data PAD Skew Control Register */
-#define GLOBAL_GMAC1_DATA_SKEW_CTRL 0x24
-
-#define GMAC_TXD_SKEW_SHIFT(x) (((x) * 4) + 16)
-#define GMAC_RXD_SKEW_SHIFT(x) ((x) * 4)
-
-/* CPU has two AHB busses. */
-
-/* Global Arbitration0 Control Register */
-#define GLOBAL_ARBITRATION0_CTRL 0x28
-
-#define BOOT_CONTROLLER_HIGH_PRIO (1 << 3)
-#define DMA_BUS1_HIGH_PRIO (1 << 2)
-#define CPU0_HIGH_PRIO (1 << 0)
-
-/* Global Arbitration1 Control Register */
-#define GLOBAL_ARBITRATION1_CTRL 0x2C
-
-#define TVE_HIGH_PRIO (1 << 9)
-#define PCI_HIGH_PRIO (1 << 8)
-#define USB1_HIGH_PRIO (1 << 7)
-#define USB0_HIGH_PRIO (1 << 6)
-#define GMAC1_HIGH_PRIO (1 << 5)
-#define GMAC0_HIGH_PRIO (1 << 4)
-#define SECURITY_HIGH_PRIO (1 << 3)
-#define RAID_HIGH_PRIO (1 << 2)
-#define IDE_HIGH_PRIO (1 << 1)
-#define DMA_BUS2_HIGH_PRIO (1 << 0)
-
-/* Common bits for both arbitration registers */
-#define BURST_LENGTH_SHIFT 16
-#define BURST_LENGTH_MASK (0x3F << 16)
-
-/* Miscellaneous Control Register */
-#define GLOBAL_MISC_CTRL 0x30
-
-#define MEMORY_SPACE_SWAP (1 << 31)
-#define USB1_PLUG_MINIB (1 << 30) /* else plug is mini-A */
-#define USB0_PLUG_MINIB (1 << 29)
-#define GMAC_GMII (1 << 28)
-#define GMAC_1_ENABLE (1 << 27)
-/* TODO: define ATA/SATA bits */
-#define USB1_VBUS_ON (1 << 23)
-#define USB0_VBUS_ON (1 << 22)
-#define APB_CLKOUT_ENABLE (1 << 21)
-#define TVC_CLKOUT_ENABLE (1 << 20)
-#define EXT_CLKIN_ENABLE (1 << 19)
-#define PCI_66MHZ (1 << 18) /* else 33 MHz */
-#define PCI_CLKOUT_ENABLE (1 << 17)
-#define LPC_CLKOUT_ENABLE (1 << 16)
-#define USB1_WAKEUP_ON (1 << 15)
-#define USB0_WAKEUP_ON (1 << 14)
-/* TODO: define PCI idle detect bits */
-#define TVC_PADS_ENABLE (1 << 9)
-#define SSP_PADS_ENABLE (1 << 8)
-#define LCD_PADS_ENABLE (1 << 7)
-#define LPC_PADS_ENABLE (1 << 6)
-#define PCI_PADS_ENABLE (1 << 5)
-#define IDE_PADS_ENABLE (1 << 4)
-#define DRAM_PADS_POWER_DOWN (1 << 3)
-#define NAND_PADS_DISABLE (1 << 2)
-#define PFLASH_PADS_DISABLE (1 << 1)
-#define SFLASH_PADS_DISABLE (1 << 0)
-
-/* Global Clock Control Register */
-#define GLOBAL_CLOCK_CTRL 0x34
-
-#define POWER_STATE_G0 (1 << 31)
-#define POWER_STATE_S1 (1 << 30) /* else it is S3/S4 state */
-#define SECURITY_APB_AHB (1 << 29)
-/* else Security APB clk will be 0.75xAHB */
-/* TODO: TVC clock divider */
-#define PCI_CLKRUN_ENABLE (1 << 16)
-#define BOOT_CLK_DISABLE (1 << 13)
-#define TVC_CLK_DISABLE (1 << 12)
-#define FLASH_CLK_DISABLE (1 << 11)
-#define DDR_CLK_DISABLE (1 << 10)
-#define PCI_CLK_DISABLE (1 << 9)
-#define IDE_CLK_DISABLE (1 << 8)
-#define USB1_CLK_DISABLE (1 << 7)
-#define USB0_CLK_DISABLE (1 << 6)
-#define SATA1_CLK_DISABLE (1 << 5)
-#define SATA0_CLK_DISABLE (1 << 4)
-#define GMAC1_CLK_DISABLE (1 << 3)
-#define GMAC0_CLK_DISABLE (1 << 2)
-#define SECURITY_CLK_DISABLE (1 << 1)
-
-/* TODO: other registers definitions if needed */
-
-#endif /* __MACH_GLOBAL_REG_H */