summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-omap3evm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3evm.c')
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c513
1 files changed, 458 insertions, 55 deletions
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d50b9be90580..017bb2f4f7d2 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,36 +20,77 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/leds.h>
+#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/usb/otg.h>
+#include <linux/smsc911x.h>
+
+#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/board.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/mcspi.h>
-#include <mach/keypad.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/mcspi.h>
+#include <plat/display.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
#define OMAP3_EVM_TS_GPIO 175
+#define OMAP3_EVM_EHCI_VBUS 22
+#define OMAP3_EVM_EHCI_SELECT 61
#define OMAP3EVM_ETHR_START 0x2c000000
#define OMAP3EVM_ETHR_SIZE 1024
+#define OMAP3EVM_ETHR_ID_REV 0x50
#define OMAP3EVM_ETHR_GPIO_IRQ 176
-#define OMAP3EVM_SMC911X_CS 5
+#define OMAP3EVM_SMSC911X_CS 5
+
+static u8 omap3_evm_version;
+
+u8 get_omap3_evm_rev(void)
+{
+ return omap3_evm_version;
+}
+EXPORT_SYMBOL(get_omap3_evm_rev);
+
+static void __init omap3_evm_get_revision(void)
+{
+ void __iomem *ioaddr;
+ unsigned int smsc_id;
+
+ /* Ethernet PHY ID is stored at ID_REV register */
+ ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
+ if (!ioaddr)
+ return;
+ smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
+ iounmap(ioaddr);
+
+ switch (smsc_id) {
+ /*SMSC9115 chipset*/
+ case 0x01150000:
+ omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
+ break;
+ /*SMSC 9220 chipset*/
+ case 0x92200000:
+ default:
+ omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
+ }
+}
-static struct resource omap3evm_smc911x_resources[] = {
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource omap3evm_smsc911x_resources[] = {
[0] = {
.start = OMAP3EVM_ETHR_START,
.end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
@@ -58,24 +99,34 @@ static struct resource omap3evm_smc911x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ,
+ .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
},
};
-static struct platform_device omap3evm_smc911x_device = {
- .name = "smc911x",
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
+};
+
+static struct platform_device omap3evm_smsc911x_device = {
+ .name = "smsc911x",
.id = -1,
- .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources),
- .resource = &omap3evm_smc911x_resources[0],
+ .num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources),
+ .resource = &omap3evm_smsc911x_resources[0],
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
};
-static inline void __init omap3evm_init_smc911x(void)
+static inline void __init omap3evm_init_smsc911x(void)
{
int eth_cs;
struct clk *l3ck;
unsigned int rate;
- eth_cs = OMAP3EVM_SMC911X_CS;
+ eth_cs = OMAP3EVM_SMSC911X_CS;
l3ck = clk_get(NULL, "l3_ck");
if (IS_ERR(l3ck))
@@ -83,16 +134,240 @@ static inline void __init omap3evm_init_smc911x(void)
else
rate = clk_get_rate(l3ck);
- if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+ if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
OMAP3EVM_ETHR_GPIO_IRQ);
return;
}
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+ platform_device_register(&omap3evm_smsc911x_device);
+}
+
+#else
+static inline void __init omap3evm_init_smsc911x(void) { return; }
+#endif
+
+/*
+ * OMAP3EVM LCD Panel control signals
+ */
+#define OMAP3EVM_LCD_PANEL_LR 2
+#define OMAP3EVM_LCD_PANEL_UD 3
+#define OMAP3EVM_LCD_PANEL_INI 152
+#define OMAP3EVM_LCD_PANEL_ENVDD 153
+#define OMAP3EVM_LCD_PANEL_QVGA 154
+#define OMAP3EVM_LCD_PANEL_RESB 155
+#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
+#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init omap3_evm_display_init(void)
+{
+ int r;
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_resb\n");
+ return;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_ini\n");
+ goto err_1;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_qvga\n");
+ goto err_2;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_lr\n");
+ goto err_3;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_ud\n");
+ goto err_4;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
+
+ r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_envdd\n");
+ goto err_5;
+ }
+ gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+ return;
+
+err_5:
+ gpio_free(OMAP3EVM_LCD_PANEL_UD);
+err_4:
+ gpio_free(OMAP3EVM_LCD_PANEL_LR);
+err_3:
+ gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
+err_2:
+ gpio_free(OMAP3EVM_LCD_PANEL_INI);
+err_1:
+ gpio_free(OMAP3EVM_LCD_PANEL_RESB);
+
+}
+
+static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+ gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+ else
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+
+ lcd_enabled = 1;
+ return 0;
}
-static struct twl4030_hsmmc_info mmc[] = {
+static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
+
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+ else
+ gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+
+ lcd_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_lcd_device = {
+ .name = "lcd",
+ .driver_name = "sharp_ls_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .platform_enable = omap3_evm_enable_lcd,
+ .platform_disable = omap3_evm_disable_lcd,
+};
+
+static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device omap3_evm_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = omap3_evm_enable_tv,
+ .platform_disable = omap3_evm_disable_tv,
+};
+
+static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
+
+ dvi_enabled = 1;
+ return 0;
+}
+
+static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
+
+ dvi_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_dvi_device = {
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = omap3_evm_enable_dvi,
+ .platform_disable = omap3_evm_disable_dvi,
+};
+
+static struct omap_dss_device *omap3_evm_dss_devices[] = {
+ &omap3_evm_lcd_device,
+ &omap3_evm_tv_device,
+ &omap3_evm_dvi_device,
+};
+
+static struct omap_dss_board_info omap3_evm_dss_data = {
+ .num_devices = ARRAY_SIZE(omap3_evm_dss_devices),
+ .devices = omap3_evm_dss_devices,
+ .default_device = &omap3_evm_lcd_device,
+};
+
+static struct platform_device omap3_evm_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3_evm_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply omap3evm_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3evm_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3evm_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vsim_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
@@ -130,15 +405,27 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- omap_cfg_reg(L8_34XX_GPIO63);
+ omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
- twl4030_mmc_init(mmc);
+ omap2_hsmmc_init(mmc);
+
+ /* link regulators to MMC adapters */
+ omap3evm_vmmc1_supply.dev = mmc[0].dev;
+ omap3evm_vsim_supply.dev = mmc[0].dev;
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
*/
+ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
+ gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+ /* gpio + 7 == DVI Enable */
+ gpio_request(gpio + 7, "EN_DVI");
+ gpio_direction_output(gpio + 7, 0);
+
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -159,30 +446,37 @@ static struct twl4030_usb_data omap3evm_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
-static int omap3evm_keymap[] = {
+static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_A),
- KEY(0, 3, KEY_B),
- KEY(1, 0, KEY_DOWN),
+ KEY(0, 1, KEY_DOWN),
+ KEY(0, 2, KEY_ENTER),
+ KEY(0, 3, KEY_M),
+
+ KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_F),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_I),
+ KEY(1, 2, KEY_I),
+ KEY(1, 3, KEY_N),
+
+ KEY(2, 0, KEY_A),
+ KEY(2, 1, KEY_E),
KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_K),
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
+ KEY(2, 3, KEY_O),
+
+ KEY(3, 0, KEY_B),
+ KEY(3, 1, KEY_F),
+ KEY(3, 2, KEY_K),
KEY(3, 3, KEY_P)
};
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
static struct twl4030_keypad_data omap3evm_kp_data = {
+ .keymap_data = &board_map_data,
.rows = 4,
.cols = 4,
- .keymap = omap3evm_keymap,
- .keymapsize = ARRAY_SIZE(omap3evm_keymap),
.rep = 1,
};
@@ -190,6 +484,56 @@ static struct twl4030_madc_platform_data omap3evm_madc_data = {
.irq_line = 1,
};
+static struct twl4030_codec_audio_data omap3evm_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3evm_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &omap3evm_audio_data,
+};
+
+static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = {
+ .supply = "vdda_dac",
+ .dev = &omap3_evm_dss_device.dev,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data omap3_evm_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3_evm_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_evm_lcd_device.dev,
+};
+
+static struct regulator_init_data omap3_evm_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3_evm_vpll2_supply,
+};
+
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
@@ -199,6 +543,9 @@ static struct twl4030_platform_data omap3evm_twldata = {
.madc = &omap3evm_madc_data,
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
+ .codec = &omap3evm_codec_data,
+ .vdac = &omap3_evm_vdac,
+ .vpll2 = &omap3_evm_vpll2,
};
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
@@ -212,6 +559,13 @@ static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
static int __init omap3_evm_i2c_init(void)
{
+ /*
+ * REVISIT: These entries can be set in omap3evm_twl_data
+ * after a merge with MFD tree
+ */
+ omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
+ omap3evm_twldata.vsim = &omap3evm_vsim;
+
omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
ARRAY_SIZE(omap3evm_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
@@ -219,15 +573,6 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
-static struct platform_device omap3_evm_lcd_device = {
- .name = "omap3evm_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static void ads7846_dev_init(void)
{
if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
@@ -275,7 +620,6 @@ struct spi_board_info omap3evm_spi_board_info[] = {
};
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
- { OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
static void __init omap3_evm_init_irq(void)
@@ -285,16 +629,50 @@ static void __init omap3_evm_init_irq(void)
omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
- omap3evm_init_smc911x();
}
static struct platform_device *omap3_evm_devices[] __initdata = {
- &omap3_evm_lcd_device,
- &omap3evm_smc911x_device,
+ &omap3_evm_dss_device,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ /* PHY reset GPIO will be runtime programmed based on EVM version */
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = -EINVAL,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP |
+ OMAP_PIN_OFF_WAKEUPENABLE),
+ OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP |
+ OMAP_PIN_OFF_WAKEUPENABLE),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
};
static void __init omap3_evm_init(void)
{
+ omap3_evm_get_revision();
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
omap3_evm_i2c_init();
platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
@@ -303,24 +681,49 @@ static void __init omap3_evm_init(void)
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
-#ifdef CONFIG_NOP_USB_XCEIV
+
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
-#endif
- usb_musb_init();
+
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+ /* enable EHCI VBUS using GPIO22 */
+ omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
+ gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
+ gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
+ gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
+
+ /* Select EHCI port on main board */
+ omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
+ gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
+ gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
+ gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
+
+ /* setup EHCI phy reset config */
+ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
+ ehci_pdata.reset_gpio_port[1] = 21;
+
+ } else {
+ /* setup EHCI phy reset on MDC */
+ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
+ ehci_pdata.reset_gpio_port[1] = 135;
+ }
+ usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
+ omap3evm_init_smsc911x();
+ omap3_evm_display_init();
}
static void __init omap3_evm_map_io(void)
{
omap2_set_globals_343x();
- omap2_map_common_io();
+ omap34xx_map_common_io();
}
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
.phys_io = 0x48000000,
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap3_evm_map_io,
.init_irq = omap3_evm_init_irq,
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2025-04-27 16:28:39 +0200