summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s5pv210/mach-goni.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s5pv210/mach-goni.c')
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c381
1 files changed, 375 insertions, 6 deletions
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index d9ecf57fc2a5..b1dcf964a768 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -15,7 +15,13 @@
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/i2c/qt602240_ts.h>
#include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lcd.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
@@ -35,7 +41,10 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
#include <plat/sdhci.h>
+#include <plat/clock.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -87,13 +96,12 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
/* Frame Buffer */
static struct s3c_fb_pd_win goni_fb_win0 = {
.win_mode = {
- .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
.left_margin = 16,
.right_margin = 16,
- .upper_margin = 3,
+ .upper_margin = 2,
.lower_margin = 28,
.hsync_len = 2,
- .vsync_len = 2,
+ .vsync_len = 1,
.xres = 480,
.yres = 800,
.refresh = 55,
@@ -111,9 +119,160 @@ static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+static int lcd_power_on(struct lcd_device *ld, int enable)
+{
+ return 1;
+}
+
+static int reset_lcd(struct lcd_device *ld)
+{
+ static unsigned int first = 1;
+ int reset_gpio = -1;
+
+ reset_gpio = S5PV210_MP05(5);
+
+ if (first) {
+ gpio_request(reset_gpio, "MLCD_RST");
+ first = 0;
+ }
+
+ gpio_direction_output(reset_gpio, 1);
+ return 1;
+}
+
+static struct lcd_platform_data goni_lcd_platform_data = {
+ .reset = reset_lcd,
+ .power_on = lcd_power_on,
+ .lcd_enabled = 0,
+ .reset_delay = 120, /* 120ms */
+ .power_on_delay = 25, /* 25ms */
+ .power_off_delay = 200, /* 200ms */
+};
+
+#define LCD_BUS_NUM 3
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "s6e63m0",
+ .platform_data = &goni_lcd_platform_data,
+ .max_speed_hz = 1200000,
+ .bus_num = LCD_BUS_NUM,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
+ },
+};
+
+static struct spi_gpio_platform_data lcd_spi_gpio_data = {
+ .sck = S5PV210_MP04(1), /* DISPLAY_CLK */
+ .mosi = S5PV210_MP04(3), /* DISPLAY_SI */
+ .miso = SPI_GPIO_NO_MISO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device goni_spi_gpio = {
+ .name = "spi_gpio",
+ .id = LCD_BUS_NUM,
+ .dev = {
+ .parent = &s3c_device_fb.dev,
+ .platform_data = &lcd_spi_gpio_data,
+ },
+};
+
+/* KEYPAD */
+static uint32_t keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 1, KEY_MENU), /* Send */
+ KEY(0, 2, KEY_BACK), /* End */
+ KEY(1, 1, KEY_CONFIG), /* Half shot */
+ KEY(1, 2, KEY_VOLUMEUP),
+ KEY(2, 1, KEY_CAMERA), /* Full shot */
+ KEY(2, 2, KEY_VOLUMEDOWN),
+};
+
+static struct matrix_keymap_data keymap_data __initdata = {
+ .keymap = keymap,
+ .keymap_size = ARRAY_SIZE(keymap),
+};
+
+static struct samsung_keypad_platdata keypad_data __initdata = {
+ .keymap_data = &keymap_data,
+ .rows = 3,
+ .cols = 3,
+};
+
+/* Radio */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("si470x", 0x10),
+ },
+};
+
+static void __init goni_radio_init(void)
+{
+ int gpio;
+
+ gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */
+ gpio_request(gpio, "FM_INT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ i2c1_devs[0].irq = gpio_to_irq(gpio);
+
+ gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */
+ gpio_request(gpio, "FM_RST");
+ gpio_direction_output(gpio, 1);
+}
+
+/* TSP */
+static struct qt602240_platform_data qt602240_platform_data = {
+ .x_line = 17,
+ .y_line = 11,
+ .x_size = 800,
+ .y_size = 480,
+ .blen = 0x21,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = QT602240_DIAGONAL,
+};
+
+static struct s3c2410_platform_i2c i2c2_data __initdata = {
+ .flags = 0,
+ .bus_num = 2,
+ .slave_addr = 0x10,
+ .frequency = 400 * 1000,
+ .sda_delay = 100,
+};
+
+static struct i2c_board_info i2c2_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("qt602240_ts", 0x4a),
+ .platform_data = &qt602240_platform_data,
+ },
+};
+
+static void __init goni_tsp_init(void)
+{
+ int gpio;
+
+ gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */
+ gpio_request(gpio, "TSP_LDO_ON");
+ gpio_direction_output(gpio, 1);
+ gpio_export(gpio, 0);
+
+ gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */
+ gpio_request(gpio, "TSP_INT");
+
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ i2c2_devs[0].irq = gpio_to_irq(gpio);
+}
+
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+static struct regulator_consumer_supply goni_ldo5_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
static struct regulator_init_data goni_ldo2_data = {
.constraints = {
.name = "VALIVE_1.1V",
@@ -153,6 +312,8 @@ static struct regulator_init_data goni_ldo5_data = {
.max_uV = 2800000,
.apply_uV = 1,
},
+ .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
+ .consumer_supplies = goni_ldo5_consumers,
};
static struct regulator_init_data goni_ldo6_data = {
@@ -360,6 +521,119 @@ static struct max8998_platform_data goni_max8998_pdata = {
};
#endif
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "DBVDD",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "AVDD2",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "CPVDD",
+ },
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD1",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD2",
+ },
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+ .consumer_supplies = wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+ .consumer_supplies = wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+ .supply_name = "VCC_1.8V_PDA",
+ .microvolts = 1800000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+ .supply_name = "V_BAT",
+ .microvolts = 3700000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage0_config,
+ },
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage1_config,
+ },
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+ .dev_name = "5-001a",
+ .supply = "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+ .dev_name = "5-001a",
+ .supply = "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+ .constraints = {
+ .name = "AVDD1_3.0V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+ .constraints = {
+ .name = "DCVDD_1.0V",
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+ /* configure gpio1 function: 0x0001(Logic level input/output) */
+ .gpio_defaults[0] = 0x0001,
+ /* configure gpio3/4/5/7 function for AIF2 voice */
+ .gpio_defaults[2] = 0x8100,
+ .gpio_defaults[3] = 0x8100,
+ .gpio_defaults[4] = 0x8100,
+ .gpio_defaults[6] = 0x0100,
+ /* configure gpio8/9/10/11 function for AIF3 BT */
+ .gpio_defaults[7] = 0x8100,
+ .gpio_defaults[8] = 0x0100,
+ .gpio_defaults[9] = 0x0100,
+ .gpio_defaults[10] = 0x0100,
+ .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
+ .ldo[1] = { 0, NULL, &wm8994_ldo2_data },
+};
+
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
@@ -385,6 +659,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
#endif
};
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5 5
+static struct i2c_gpio_platform_data goni_i2c_gpio5_data = {
+ .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
+ .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
+};
+
+static struct platform_device goni_i2c_gpio5 = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_BUS_5,
+ .dev = {
+ .platform_data = &goni_i2c_gpio5_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+ {
+ /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+ I2C_BOARD_INFO("wm8994", 0x1a),
+ .platform_data = &wm8994_platform_data,
+ },
+};
+
/* PMIC Power button */
static struct gpio_keys_button goni_gpio_keys_table[] = {
{
@@ -444,11 +741,37 @@ static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
.ext_cd_gpio_invert = 1,
};
+static struct regulator_consumer_supply mmc2_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data mmc2_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "V_TF_2.8V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies),
+ .consumer_supplies = mmc2_supplies,
+};
+
+static struct fixed_voltage_config mmc2_fixed_voltage_config = {
+ .supply_name = "EXT_FLASH_EN",
+ .microvolts = 2800000,
+ .gpio = GONI_EXT_FLASH_EN,
+ .enable_high = true,
+ .init_data = &mmc2_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc2_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = 2,
+ .dev = {
+ .platform_data = &mmc2_fixed_voltage_config,
+ },
+};
+
static void goni_setup_sdhci(void)
{
- gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
- gpio_direction_output(GONI_EXT_FLASH_EN, 1);
-
s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
@@ -457,7 +780,10 @@ static void goni_setup_sdhci(void)
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
+ &goni_spi_gpio,
&goni_i2c_gpio_pmic,
+ &goni_i2c_gpio5,
+ &mmc2_fixed_voltage,
&goni_device_gpiokeys,
&s5p_device_fimc0,
&s5p_device_fimc1,
@@ -465,8 +791,24 @@ static struct platform_device *goni_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
+ &s5pv210_device_iis0,
+ &s3c_device_usb_hsotg,
+ &samsung_device_keypad,
+ &s3c_device_i2c1,
+ &s3c_device_i2c2,
+ &wm8994_fixed_voltage0,
+ &wm8994_fixed_voltage1,
};
+static void __init goni_sound_init(void)
+{
+ /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+ * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+ * because it needs 24MHz clock to operate WM8994 codec.
+ */
+ __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
static void __init goni_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -476,6 +818,20 @@ static void __init goni_map_io(void)
static void __init goni_machine_init(void)
{
+ /* Radio: call before I2C 1 registeration */
+ goni_radio_init();
+
+ /* I2C1 */
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+ /* TSP: call before I2C 2 registeration */
+ goni_tsp_init();
+
+ /* I2C2 */
+ s3c_i2c2_set_platdata(&i2c2_data);
+ i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
+
/* PMIC */
goni_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
@@ -483,9 +839,22 @@ static void __init goni_machine_init(void)
/* SDHCI */
goni_setup_sdhci();
+ /* SOUND */
+ goni_sound_init();
+ i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+ ARRAY_SIZE(i2c_gpio5_devs));
+
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
+ /* SPI */
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ /* KEYPAD */
+ samsung_keypad_set_platdata(&keypad_data);
+
+ clk_xusbxti.rate = 24000000;
+
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}