summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-common/pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-common/pm.c')
-rw-r--r--arch/blackfin/mach-common/pm.c301
1 files changed, 0 insertions, 301 deletions
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
deleted file mode 100644
index f57b5fe5355e..000000000000
--- a/arch/blackfin/mach-common/pm.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Blackfin power management
- *
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2
- * based on arm/mach-omap/pm.c
- * Copyright 2001, Cliff Brake <cbrake@accelent.com> and others
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-
-#include <asm/cplb.h>
-#include <asm/dma.h>
-#include <asm/dpmc.h>
-#include <asm/pm.h>
-#include <asm/gpio.h>
-
-#ifdef CONFIG_BF60x
-struct bfin_cpu_pm_fns *bfin_cpu_pm;
-#endif
-
-void bfin_pm_suspend_standby_enter(void)
-{
-#if !BFIN_GPIO_PINT
- bfin_pm_standby_setup();
-#endif
-
-#ifdef CONFIG_BF60x
- bfin_cpu_pm->enter(PM_SUSPEND_STANDBY);
-#else
-# ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
- sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
-# else
- sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
-# endif
-#endif
-
-#if !BFIN_GPIO_PINT
- bfin_pm_standby_restore();
-#endif
-
-#ifndef CONFIG_BF60x
-#ifdef SIC_IWR0
- bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-# ifdef SIC_IWR1
- /* BF52x system reset does not properly reset SIC_IWR1 which
- * will screw up the bootrom as it relies on MDMA0/1 waking it
- * up from IDLE instructions. See this report for more info:
- * http://blackfin.uclinux.org/gf/tracker/4323
- */
- if (ANOMALY_05000435)
- bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
- else
- bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-# endif
-# ifdef SIC_IWR2
- bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
-# endif
-#else
- bfin_write_SIC_IWR(IWR_DISABLE_ALL);
-#endif
-
-#endif
-}
-
-int bf53x_suspend_l1_mem(unsigned char *memptr)
-{
- dma_memcpy_nocache(memptr, (const void *) L1_CODE_START,
- L1_CODE_LENGTH);
- dma_memcpy_nocache(memptr + L1_CODE_LENGTH,
- (const void *) L1_DATA_A_START, L1_DATA_A_LENGTH);
- dma_memcpy_nocache(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
- (const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
- memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
- L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
- L1_SCRATCH_LENGTH);
-
- return 0;
-}
-
-int bf53x_resume_l1_mem(unsigned char *memptr)
-{
- dma_memcpy_nocache((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
- dma_memcpy_nocache((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
- L1_DATA_A_LENGTH);
- dma_memcpy_nocache((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
- L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
- memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
- L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
-
- return 0;
-}
-
-#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
-# ifdef CONFIG_BF60x
-__attribute__((l1_text))
-# endif
-static void flushinv_all_dcache(void)
-{
- register u32 way, bank, subbank, set;
- register u32 status, addr;
- u32 dmem_ctl = bfin_read_DMEM_CONTROL();
-
- for (bank = 0; bank < 2; ++bank) {
- if (!(dmem_ctl & (1 << (DMC1_P - bank))))
- continue;
-
- for (way = 0; way < 2; ++way)
- for (subbank = 0; subbank < 4; ++subbank)
- for (set = 0; set < 64; ++set) {
-
- bfin_write_DTEST_COMMAND(
- way << 26 |
- bank << 23 |
- subbank << 16 |
- set << 5
- );
- CSYNC();
- status = bfin_read_DTEST_DATA0();
-
- /* only worry about valid/dirty entries */
- if ((status & 0x3) != 0x3)
- continue;
-
-
- /* construct the address using the tag */
- addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
-
- /* flush it */
- __asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
- }
- }
-}
-#endif
-
-int bfin_pm_suspend_mem_enter(void)
-{
- int ret;
-#ifndef CONFIG_BF60x
- int wakeup;
-#endif
-
- unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
- + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
- GFP_ATOMIC);
-
- if (memptr == NULL) {
- panic("bf53x_suspend_l1_mem malloc failed");
- return -ENOMEM;
- }
-
-#ifndef CONFIG_BF60x
- wakeup = bfin_read_VR_CTL() & ~FREQ;
- wakeup |= SCKELOW;
-
-#ifdef CONFIG_PM_BFIN_WAKE_PH6
- wakeup |= PHYWE;
-#endif
-#ifdef CONFIG_PM_BFIN_WAKE_GP
- wakeup |= GPWE;
-#endif
-#endif
-
- ret = blackfin_dma_suspend();
-
- if (ret) {
- kfree(memptr);
- return ret;
- }
-
-#ifdef CONFIG_GPIO_ADI
- bfin_gpio_pm_hibernate_suspend();
-#endif
-
-#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
- flushinv_all_dcache();
- udelay(1);
-#endif
- _disable_dcplb();
- _disable_icplb();
- bf53x_suspend_l1_mem(memptr);
-
-#ifndef CONFIG_BF60x
- do_hibernate(wakeup | vr_wakeup); /* See you later! */
-#else
- bfin_cpu_pm->enter(PM_SUSPEND_MEM);
-#endif
-
- bf53x_resume_l1_mem(memptr);
-
- _enable_icplb();
- _enable_dcplb();
-
-#ifdef CONFIG_GPIO_ADI
- bfin_gpio_pm_hibernate_restore();
-#endif
- blackfin_dma_resume();
-
- kfree(memptr);
-
- return 0;
-}
-
-/*
- * bfin_pm_valid - Tell the PM core that we only support the standby sleep
- * state
- * @state: suspend state we're checking.
- *
- */
-static int bfin_pm_valid(suspend_state_t state)
-{
- return (state == PM_SUSPEND_STANDBY
-#if !(defined(BF533_FAMILY) || defined(CONFIG_BF561))
- /*
- * On BF533/2/1:
- * If we enter Hibernate the SCKE Pin is driven Low,
- * so that the SDRAM enters Self Refresh Mode.
- * However when the reset sequence that follows hibernate
- * state is executed, SCKE is driven High, taking the
- * SDRAM out of Self Refresh.
- *
- * If you reconfigure and access the SDRAM "very quickly",
- * you are likely to avoid errors, otherwise the SDRAM
- * start losing its contents.
- * An external HW workaround is possible using logic gates.
- */
- || state == PM_SUSPEND_MEM
-#endif
- );
-}
-
-/*
- * bfin_pm_enter - Actually enter a sleep state.
- * @state: State we're entering.
- *
- */
-static int bfin_pm_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_STANDBY:
- bfin_pm_suspend_standby_enter();
- break;
- case PM_SUSPEND_MEM:
- bfin_pm_suspend_mem_enter();
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
-void bfin_pm_end(void)
-{
- u32 cycle, cycle2;
- u64 usec64;
- u32 usec;
-
- __asm__ __volatile__ (
- "1: %0 = CYCLES2\n"
- "%1 = CYCLES\n"
- "%2 = CYCLES2\n"
- "CC = %2 == %0\n"
- "if ! CC jump 1b\n"
- : "=d,a" (cycle2), "=d,a" (cycle), "=d,a" (usec) : : "CC"
- );
-
- usec64 = ((u64)cycle2 << 32) + cycle;
- do_div(usec64, get_cclk() / USEC_PER_SEC);
- usec = usec64;
- if (usec == 0)
- usec = 1;
-
- pr_info("PM: resume of kernel completes after %ld msec %03ld usec\n",
- usec / USEC_PER_MSEC, usec % USEC_PER_MSEC);
-}
-#endif
-
-static const struct platform_suspend_ops bfin_pm_ops = {
- .enter = bfin_pm_enter,
- .valid = bfin_pm_valid,
-#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
- .end = bfin_pm_end,
-#endif
-};
-
-static int __init bfin_pm_init(void)
-{
- suspend_set_ops(&bfin_pm_ops);
- return 0;
-}
-
-__initcall(bfin_pm_init);