diff options
Diffstat (limited to 'arch/i386/kernel/quirks.c')
-rw-r--r-- | arch/i386/kernel/quirks.c | 69 |
1 files changed, 59 insertions, 10 deletions
diff --git a/arch/i386/kernel/quirks.c b/arch/i386/kernel/quirks.c index 9f6ab1789bb0..34874c398b44 100644 --- a/arch/i386/kernel/quirks.c +++ b/arch/i386/kernel/quirks.c @@ -3,10 +3,12 @@ */ #include <linux/pci.h> #include <linux/irq.h> +#include <asm/pci-direct.h> +#include <asm/genapic.h> +#include <asm/cpu.h> #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) - -static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) +static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev) { u8 config, rev; u32 word; @@ -14,14 +16,12 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) /* BIOS may enable hardware IRQ balancing for * E7520/E7320/E7525(revision ID 0x9 and below) * based platforms. - * Disable SW irqbalance/affinity on those platforms. + * For those platforms, make sure that the genapic is set to 'flat' */ pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); if (rev > 0x9) return; - printk(KERN_INFO "Intel E7520/7320/7525 detected."); - /* enable access to config space*/ pci_read_config_byte(dev, 0xf4, &config); pci_write_config_byte(dev, 0xf4, config|0x2); @@ -30,6 +30,44 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word); if (!(word & (1 << 13))) { +#ifdef CONFIG_X86_64 + if (genapic != &apic_flat) + panic("APIC mode must be flat on this system\n"); +#elif defined(CONFIG_X86_GENERICARCH) + if (genapic != &apic_default) + panic("APIC mode must be default(flat) on this system. Use apic=default\n"); +#endif + } + + /* put back the original value for config space*/ + if (!(config & 0x2)) + pci_write_config_byte(dev, 0xf4, config); +} + +void __init quirk_intel_irqbalance(void) +{ + u8 config, rev; + u32 word; + + /* BIOS may enable hardware IRQ balancing for + * E7520/E7320/E7525(revision ID 0x9 and below) + * based platforms. + * Disable SW irqbalance/affinity on those platforms. + */ + rev = read_pci_config_byte(0, 0, 0, PCI_CLASS_REVISION); + if (rev > 0x9) + return; + + printk(KERN_INFO "Intel E7520/7320/7525 detected."); + + /* enable access to config space */ + config = read_pci_config_byte(0, 0, 0, 0xf4); + write_pci_config_byte(0, 0, 0, 0xf4, config|0x2); + + /* read xTPR register */ + word = read_pci_config_16(0, 0, 0x40, 0x4c); + + if (!(word & (1 << 13))) { printk(KERN_INFO "Disabling irq balancing and affinity\n"); #ifdef CONFIG_IRQBALANCE irqbalance_disable(""); @@ -38,13 +76,24 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) #ifdef CONFIG_PROC_FS no_irq_affinity = 1; #endif +#ifdef CONFIG_HOTPLUG_CPU + printk(KERN_INFO "Disabling cpu hotplug control\n"); + enable_cpu_hotplug = 0; +#endif +#ifdef CONFIG_X86_64 + /* force the genapic selection to flat mode so that + * interrupts can be redirected to more than one CPU. + */ + genapic_force = &apic_flat; +#endif } - /* put back the original value for config space*/ + /* put back the original value for config space */ if (!(config & 0x2)) - pci_write_config_byte(dev, 0xf4, config); + write_pci_config_byte(0, 0, 0, 0xf4, config); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, verify_quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, verify_quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, verify_quirk_intel_irqbalance); + #endif |