summaryrefslogtreecommitdiffstats
path: root/arch/m68k/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/kernel/head.S')
-rw-r--r--arch/m68k/kernel/head.S207
1 files changed, 86 insertions, 121 deletions
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 3ab329b88521..dbb118e1a4e0 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -153,7 +153,7 @@
* ------------
* The console is also able to be turned off. The console in head.S
* is specifically for debugging and can be very useful. It is surrounded by
- * #ifdef CONSOLE/#endif clauses so it doesn't have to ship in known-good
+ * #ifdef / #endif clauses so it doesn't have to ship in known-good
* kernels. It's basic algorithm is to determine the size of the screen
* (in height/width and bit depth) and then use that information for
* displaying an 8x8 font or an 8x16 (widthxheight). I prefer the 8x8 for
@@ -198,9 +198,8 @@
* CONFIG_xxx: These are the obvious machine configuration defines created
* during configuration. These are defined in autoconf.h.
*
- * CONSOLE: There is support for head.S console in this file. This
- * console can talk to a Mac frame buffer, but could easily be extrapolated
- * to extend it to support other platforms.
+ * CONSOLE_DEBUG: Only supports a Mac frame buffer but could easily be
+ * extended to support other platforms.
*
* TEST_MMU: This is a test harness for running on any given machine but
* getting an MMU dump for another class of machine. The classes of machines
@@ -222,7 +221,7 @@
* MMU_PRINT: There is a routine built into head.S that can display the
* MMU data structures. It outputs its result through the serial_putc
* interface. So where ever that winds up driving data, that's where the
- * mmu struct will appear. On the Macintosh that's typically the console.
+ * mmu struct will appear.
*
* SERIAL_DEBUG: There are a series of putc() macro statements
* scattered through out the code to give progress of status to the
@@ -250,8 +249,8 @@
* USE_MFP: Use the ST-MFP port (Modem1) for serial debug.
*
* Macintosh constants:
- * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
- * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
+ * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug.
+ * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug.
*/
#include <linux/linkage.h>
@@ -268,27 +267,17 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
-
#ifdef CONFIG_MAC
-
-#include <asm/machw.h>
-
-#ifdef CONFIG_FRAMEBUFFER_CONSOLE
-#define CONSOLE
+# include <asm/machw.h>
#endif
#ifdef CONFIG_EARLY_PRINTK
-#define SERIAL_DEBUG
-#else
-#undef SERIAL_DEBUG
+# define SERIAL_DEBUG
+# if defined(CONFIG_MAC) && defined(CONFIG_FONT_SUPPORT)
+# define CONSOLE_DEBUG
+# endif
#endif
-#else /* !CONFIG_MAC */
-
-#define SERIAL_DEBUG
-
-#endif /* !CONFIG_MAC */
-
#undef MMU_PRINT
#undef MMU_NOCACHE_KERNEL
#undef DEBUG
@@ -303,6 +292,7 @@
.globl kernel_pg_dir
.globl availmem
+.globl m68k_init_mapped_size
.globl m68k_pgtable_cachemode
.globl m68k_supervisor_cachemode
#ifdef CONFIG_MVME16x
@@ -480,22 +470,21 @@ func_define serial_putc,1
func_define console_putc,1
func_define console_init
-func_define console_put_stats
func_define console_put_penguin
func_define console_plot_pixel,3
func_define console_scroll
.macro putc ch
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
pea \ch
#endif
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
func_call console_putc
#endif
#ifdef SERIAL_DEBUG
func_call serial_putc
#endif
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
addql #4,%sp
#endif
.endm
@@ -515,7 +504,7 @@ func_define putn,1
.endm
.macro puts string
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
__INITDATA
.Lstr\@:
.string "\string"
@@ -651,11 +640,9 @@ ENTRY(__start)
lea %pc@(L(mac_rowbytes)),%a1
movel %a0@,%a1@
-#ifdef SERIAL_DEBUG
get_bi_record BI_MAC_SCCBASE
lea %pc@(L(mac_sccbase)),%a1
movel %a0@,%a1@
-#endif
L(test_notmac):
#endif /* CONFIG_MAC */
@@ -885,13 +872,12 @@ L(nothp):
*/
#ifdef CONFIG_MAC
is_not_mac(L(nocon))
-# ifdef CONSOLE
+# ifdef CONSOLE_DEBUG
console_init
# ifdef CONFIG_LOGO
console_put_penguin
# endif /* CONFIG_LOGO */
- console_put_stats
-# endif /* CONSOLE */
+# endif /* CONSOLE_DEBUG */
L(nocon):
#endif /* CONFIG_MAC */
@@ -922,10 +908,21 @@ L(nocon):
*
* This block of code does what's necessary to map in the various kinds
* of machines for execution of Linux.
- * First map the first 4 MB of kernel code & data
+ * First map the first 4, 8, or 16 MB of kernel code & data
*/
- mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),#4*1024*1024,\
+ get_bi_record BI_MEMCHUNK
+ movel %a0@(4),%d0
+ movel #16*1024*1024,%d1
+ cmpl %d0,%d1
+ jls 1f
+ lsrl #1,%d1
+ cmpl %d0,%d1
+ jls 1f
+ lsrl #1,%d1
+1:
+ movel %d1,m68k_init_mapped_size
+ mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\
%pc@(m68k_supervisor_cachemode)
putc 'C'
@@ -1396,15 +1393,13 @@ L(mmu_fixup_done):
andl L(mac_videobase),%d0
addl #VIDEOMEMBASE,%d0
movel %d0,L(mac_videobase)
-#if defined(CONSOLE)
+#ifdef CONSOLE_DEBUG
movel %pc@(L(phys_kernel_start)),%d0
subl #PAGE_OFFSET,%d0
subl %d0,L(console_font)
subl %d0,L(console_font_data)
#endif
-#ifdef SERIAL_DEBUG
orl #0x50000000,L(mac_sccbase)
-#endif
1:
#endif
@@ -2734,7 +2729,12 @@ func_return get_new_page
*/
#ifdef CONFIG_MAC
+/* You may define either or both of these. */
+#define MAC_USE_SCC_A /* Modem port */
+#define MAC_USE_SCC_B /* Printer port */
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
+/* Initialisation table for SCC with 3.6864 MHz PCLK */
L(scc_initable_mac):
.byte 4,0x44 /* x16, 1 stopbit, no parity */
.byte 3,0xc0 /* receiver: 8 bpc */
@@ -2748,6 +2748,7 @@ L(scc_initable_mac):
.byte -1
.even
#endif
+#endif /* CONFIG_MAC */
#ifdef CONFIG_ATARI
/* #define USE_PRINTER */
@@ -2756,14 +2757,12 @@ L(scc_initable_mac):
#define USE_MFP
#if defined(USE_SCC_A) || defined(USE_SCC_B)
-#define USE_SCC
-/* Initialisation table for SCC */
-L(scc_initable):
- .byte 9,12 /* Reset */
+/* Initialisation table for SCC with 7.9872 MHz PCLK */
+/* PCLK == 8.0539 gives baud == 9680.1 */
+L(scc_initable_atari):
.byte 4,0x44 /* x16, 1 stopbit, no parity */
.byte 3,0xc0 /* receiver: 8 bpc */
.byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */
- .byte 9,0 /* no interrupts */
.byte 10,0 /* NRZ */
.byte 11,0x50 /* use baud rate generator */
.byte 12,24,13,0 /* 9600 baud */
@@ -2812,7 +2811,7 @@ LMFP_UDR = 0xfffa2f
*/
/*
- * Initialize serial port hardware for 9600/8/1
+ * Initialize serial port hardware
*/
func_start serial_init,%d0/%d1/%a0/%a1
/*
@@ -2822,7 +2821,7 @@ func_start serial_init,%d0/%d1/%a0/%a1
* d0 = boot info offset
* CONFIG_ATARI
* a0 = address of SCC
- * a1 = Liobase address/address of scc_initable
+ * a1 = Liobase address/address of scc_initable_atari
* d0 = init data for serial port
* CONFIG_MAC
* a0 = address of SCC
@@ -2843,6 +2842,7 @@ func_start serial_init,%d0/%d1/%a0/%a1
| movew #61,CUSTOMBASE+C_SERPER-ZTWOBASE
1:
#endif
+
#ifdef CONFIG_ATARI
is_not_atari(4f)
movel %pc@(L(iobase)),%a1
@@ -2857,9 +2857,21 @@ func_start serial_init,%d0/%d1/%a0/%a1
moveb %a1@(LPSG_READ),%d0
bset #5,%d0
moveb %d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
lea %a1@(LSCC_CTRL),%a0
- lea %pc@(L(scc_initable)),%a1
+ /* Reset SCC register pointer */
+ moveb %a0@,%d0
+ /* Reset SCC device: write register pointer then register value */
+ moveb #9,%a0@
+ moveb #0xc0,%a0@
+ /* Wait for 5 PCLK cycles, which is about 63 CPU cycles */
+ /* 5 / 7.9872 MHz = approx. 0.63 us = 63 / 100 MHz */
+ movel #32,%d0
+2:
+ subq #1,%d0
+ jne 2b
+ /* Initialize channel */
+ lea %pc@(L(scc_initable_atari)),%a1
2: moveb %a1@+,%d0
jmi 3f
moveb %d0,%a0@
@@ -2877,21 +2889,14 @@ func_start serial_init,%d0/%d1/%a0/%a1
jra L(serial_init_done)
4:
#endif
+
#ifdef CONFIG_MAC
is_not_mac(L(serial_init_not_mac))
-
-#ifdef SERIAL_DEBUG
-
-/* You may define either or both of these. */
-#define MAC_USE_SCC_A /* Modem port */
-#define MAC_USE_SCC_B /* Printer port */
-
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
#define mac_scc_cha_b_ctrl_offset 0x0
#define mac_scc_cha_a_ctrl_offset 0x2
#define mac_scc_cha_b_data_offset 0x4
#define mac_scc_cha_a_data_offset 0x6
-
-#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
movel %pc@(L(mac_sccbase)),%a0
/* Reset SCC register pointer */
moveb %a0@(mac_scc_cha_a_ctrl_offset),%d0
@@ -2905,7 +2910,6 @@ func_start serial_init,%d0/%d1/%a0/%a1
subq #1,%d0
jne 5b
#endif
-
#ifdef MAC_USE_SCC_A
/* Initialize channel A */
lea %pc@(L(scc_initable_mac)),%a1
@@ -2916,7 +2920,6 @@ func_start serial_init,%d0/%d1/%a0/%a1
jra 5b
6:
#endif /* MAC_USE_SCC_A */
-
#ifdef MAC_USE_SCC_B
/* Initialize channel B */
lea %pc@(L(scc_initable_mac)),%a1
@@ -2927,9 +2930,6 @@ func_start serial_init,%d0/%d1/%a0/%a1
jra 7b
8:
#endif /* MAC_USE_SCC_B */
-
-#endif /* SERIAL_DEBUG */
-
jra L(serial_init_done)
L(serial_init_not_mac):
#endif /* CONFIG_MAC */
@@ -2959,6 +2959,15 @@ L(serial_init_not_mac):
2:
#endif
+#ifdef CONFIG_MVME16x
+ is_not_mvme16x(L(serial_init_not_mvme16x))
+ moveb #0x10,M167_PCSCCMICR
+ moveb #0x10,M167_PCSCCTICR
+ moveb #0x10,M167_PCSCCRICR
+ jra L(serial_init_done)
+L(serial_init_not_mvme16x):
+#endif
+
#ifdef CONFIG_APOLLO
/* We count on the PROM initializing SIO1 */
#endif
@@ -2998,27 +3007,19 @@ func_start serial_putc,%d0/%d1/%a0/%a1
#ifdef CONFIG_MAC
is_not_mac(5f)
-
-#ifdef SERIAL_DEBUG
-
#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
movel %pc@(L(mac_sccbase)),%a1
#endif
-
#ifdef MAC_USE_SCC_A
3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset)
jeq 3b
moveb %d0,%a1@(mac_scc_cha_a_data_offset)
#endif /* MAC_USE_SCC_A */
-
#ifdef MAC_USE_SCC_B
4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset)
jeq 4b
moveb %d0,%a1@(mac_scc_cha_b_data_offset)
#endif /* MAC_USE_SCC_B */
-
-#endif /* SERIAL_DEBUG */
-
jra L(serial_putc_done)
5:
#endif /* CONFIG_MAC */
@@ -3039,7 +3040,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1
nop
bset #5,%d0
moveb %d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
3: btst #2,%a1@(LSCC_CTRL)
jeq 3b
moveb %d0,%a1@(LSCC_DATA)
@@ -3195,7 +3196,7 @@ func_start puts,%d0/%a0
movel ARG1,%a0
jra 2f
1:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
console_putc %d0
#endif
#ifdef SERIAL_DEBUG
@@ -3224,7 +3225,7 @@ func_start putn,%d0-%d2
jls 2f
addb #'A'-('9'+1),%d2
2:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
console_putc %d2
#endif
#ifdef SERIAL_DEBUG
@@ -3234,21 +3235,19 @@ func_start putn,%d0-%d2
func_return putn
-#ifdef CONFIG_MAC
+#ifdef CONFIG_EARLY_PRINTK
/*
- * mac_early_print
- *
* This routine takes its parameters on the stack. It then
* turns around and calls the internal routines. This routine
* is used by the boot console.
*
* The calling parameters are:
- * void mac_early_print(const char *str, unsigned length);
+ * void debug_cons_nputs(const char *str, unsigned length)
*
* This routine does NOT understand variable arguments only
* simple strings!
*/
-ENTRY(mac_early_print)
+ENTRY(debug_cons_nputs)
moveml %d0/%d1/%a0,%sp@-
movew %sr,%sp@-
ori #0x0700,%sr
@@ -3256,7 +3255,7 @@ ENTRY(mac_early_print)
movel %sp@(22),%d1 /* fetch parameter */
jra 2f
1:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
console_putc %d0
#endif
#ifdef SERIAL_DEBUG
@@ -3270,7 +3269,7 @@ ENTRY(mac_early_print)
movew %sp@+,%sr
moveml %sp@+,%d0/%d1/%a0
rts
-#endif /* CONFIG_MAC */
+#endif /* CONFIG_EARLY_PRINTK */
#if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
func_start set_leds,%d0/%a0
@@ -3292,7 +3291,7 @@ func_start set_leds,%d0/%a0
func_return set_leds
#endif
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
/*
* For continuity, see the data alignment
* to which this structure is tied.
@@ -3396,43 +3395,6 @@ L(console_clear_loop):
1:
func_return console_init
-func_start console_put_stats,%a0/%d7
- /*
- * Some of the register usage that follows
- * a0 = pointer to boot_info
- * d7 = value of boot_info fields
- */
- puts "\nMacLinux\n"
-
-#ifdef SERIAL_DEBUG
- puts "\n vidaddr:"
- putn %pc@(L(mac_videobase)) /* video addr. */
-
- puts "\n _stext:"
- lea %pc@(_stext),%a0
- putn %a0
-
- puts "\nbootinfo:"
- lea %pc@(_end),%a0
- putn %a0
-
- puts "\n cpuid:"
- putn %pc@(L(cputype))
-
-# ifdef CONFIG_MAC
- puts "\n sccbase:"
- putn %pc@(L(mac_sccbase))
-# endif
-# ifdef MMU_PRINT
- putc '\n'
- jbsr mmu_print_machine_cpu_types
-# endif
-#endif /* SERIAL_DEBUG */
-
- putc '\n'
-
-func_return console_put_stats
-
#ifdef CONFIG_LOGO
func_start console_put_penguin,%a0-%a1/%d0-%d7
/*
@@ -3774,12 +3736,15 @@ L(white_16):
L(console_plot_pixel_exit):
func_return console_plot_pixel
-#endif /* CONSOLE */
+#endif /* CONSOLE_DEBUG */
__INITDATA
.align 4
+m68k_init_mapped_size:
+ .long 0
+
#if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \
defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
L(custom):
@@ -3787,7 +3752,7 @@ L(iobase):
.long 0
#endif
-#if defined(CONSOLE)
+#ifdef CONSOLE_DEBUG
L(console_globals):
.long 0 /* cursor column */
.long 0 /* cursor row */
@@ -3798,7 +3763,7 @@ L(console_font):
.long 0 /* pointer to console font (struct font_desc) */
L(console_font_data):
.long 0 /* pointer to console font data */
-#endif /* CONSOLE */
+#endif /* CONSOLE_DEBUG */
#if defined(MMU_PRINT)
L(mmu_print_data):
@@ -3838,7 +3803,9 @@ M167_CYIER = 0xfff45011
M167_CYLICR = 0xfff45026
M167_CYTEOIR = 0xfff45085
M167_CYTDR = 0xfff450f8
+M167_PCSCCMICR = 0xfff4201d
M167_PCSCCTICR = 0xfff4201e
+M167_PCSCCRICR = 0xfff4201f
M167_PCTPIACKR = 0xfff42025
#endif
@@ -3856,10 +3823,8 @@ L(mac_dimensions):
.long 0
L(mac_rowbytes):
.long 0
-#ifdef SERIAL_DEBUG
L(mac_sccbase):
.long 0
-#endif
#endif /* CONFIG_MAC */
#if defined (CONFIG_APOLLO)