summaryrefslogtreecommitdiffstats
path: root/arch/mips/mm/cerr-sb1.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/mm/cerr-sb1.c')
-rw-r--r--arch/mips/mm/cerr-sb1.c54
1 files changed, 46 insertions, 8 deletions
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 7166ffe63502..1cf3c6006ccd 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -19,13 +19,19 @@
#include <linux/sched.h>
#include <asm/mipsregs.h>
#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
-#ifndef CONFIG_SIBYTE_BUS_WATCHER
+#if !defined(CONFIG_SIBYTE_BUS_WATCHER) || defined(CONFIG_SIBYTE_BW_TRACE)
#include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_scd.h>
#endif
+/*
+ * We'd like to dump the L2_ECC_TAG register on errors, but errata make
+ * that unsafe... So for now we don't. (BCM1250/BCM112x erratum SOC-48.)
+ */
+#undef DUMP_L2_ECC_TAG_ON_ERROR
+
/* SB1 definitions */
/* XXX should come from config1 XXX */
@@ -139,12 +145,18 @@ static inline void breakout_cerrd(unsigned int val)
static void check_bus_watcher(void)
{
uint32_t status, l2_err, memio_err;
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ uint64_t l2_tag;
+#endif
/* Destructive read, clears register and interrupt */
status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
/* Bit 31 is always on, but there's no #define for that */
if (status & ~(1UL << 31)) {
l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+#endif
memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
prom_printf("\nLast recorded signature:\n");
@@ -153,6 +165,9 @@ static void check_bus_watcher(void)
(int)(G_SCD_BERR_TID(status) >> 6),
(int)G_SCD_BERR_RID(status),
(int)G_SCD_BERR_DCODE(status));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+#endif
} else {
prom_printf("Bus watcher indicates no error\n");
}
@@ -166,6 +181,16 @@ asmlinkage void sb1_cache_error(void)
uint64_t cerr_dpa;
uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
+#ifdef CONFIG_SIBYTE_BW_TRACE
+ /* Freeze the trace buffer now */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#else
+ csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#endif
+ prom_printf("Trace buffer frozen\n");
+#endif
+
prom_printf("Cache error exception on CPU %x:\n",
(read_c0_prid() >> 25) & 0x7);
@@ -229,11 +254,19 @@ asmlinkage void sb1_cache_error(void)
check_bus_watcher();
- while (1);
/*
- * This tends to make things get really ugly; let's just stall instead.
- * panic("Can't handle the cache error!");
+ * Calling panic() when a fatal cache error occurs scrambles the
+ * state of the system (and the cache), making it difficult to
+ * investigate after the fact. However, if you just stall the CPU,
+ * the other CPU may keep on running, which is typically very
+ * undesirable.
*/
+#ifdef CONFIG_SB1_CERR_STALL
+ while (1)
+ ;
+#else
+ panic("unhandled cache error");
+#endif
}
@@ -434,7 +467,8 @@ static struct dc_state dc_states[] = {
};
#define DC_TAG_VALID(state) \
- (((state) == 0xf) || ((state) == 0x13) || ((state) == 0x19) || ((state == 0x16)) || ((state) == 0x1c))
+ (((state) == 0x0) || ((state) == 0xf) || ((state) == 0x13) || \
+ ((state) == 0x19) || ((state) == 0x16) || ((state) == 0x1c))
static char *dc_state_str(unsigned char state)
{
@@ -505,6 +539,7 @@ static uint32_t extract_dc(unsigned short addr, int data)
uint64_t datalo;
uint32_t datalohi, datalolo, datahi;
int offset;
+ char bad_ecc = 0;
for (offset = 0; offset < 4; offset++) {
/* Index-load-data-D */
@@ -525,8 +560,7 @@ static uint32_t extract_dc(unsigned short addr, int data)
ecc = dc_ecc(datalo);
if (ecc != datahi) {
int bits = 0;
- prom_printf(" ** bad ECC (%02x %02x) ->",
- datahi, ecc);
+ bad_ecc |= 1 << (3-offset);
ecc ^= datahi;
while (ecc) {
if (ecc & 1) bits++;
@@ -537,6 +571,10 @@ static uint32_t extract_dc(unsigned short addr, int data)
prom_printf(" %02X-%016llX", datahi, datalo);
}
prom_printf("\n");
+ if (bad_ecc)
+ prom_printf(" dwords w/ bad ECC: %d %d %d %d\n",
+ !!(bad_ecc & 8), !!(bad_ecc & 4),
+ !!(bad_ecc & 2), !!(bad_ecc & 1));
}
}
return res;