summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci/pci-ip27.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/pci-ip27.c')
-rw-r--r--arch/mips/pci/pci-ip27.c181
1 files changed, 0 insertions, 181 deletions
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 3c177b4d0609..441eb9383b20 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -7,162 +7,7 @@
* Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/dma-direct.h>
-#include <asm/sn/arch.h>
#include <asm/pci/bridge.h>
-#include <asm/paccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Max #PCI busses we can handle; ie, max #PCI bridges.
- */
-#define MAX_PCI_BUSSES 40
-
-/*
- * XXX: No kmalloc available when we do our crosstalk scan,
- * we should try to move it later in the boot process.
- */
-static struct bridge_controller bridges[MAX_PCI_BUSSES];
-
-extern struct pci_ops bridge_pci_ops;
-
-int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
-{
- unsigned long offset = NODE_OFFSET(nasid);
- struct bridge_controller *bc;
- static int num_bridges = 0;
- int slot;
-
- pci_set_flags(PCI_PROBE_ONLY);
-
- printk("a bridge\n");
-
- /* XXX: kludge alert.. */
- if (!num_bridges)
- ioport_resource.end = ~0UL;
-
- bc = &bridges[num_bridges];
-
- bc->pc.pci_ops = &bridge_pci_ops;
- bc->pc.mem_resource = &bc->mem;
- bc->pc.io_resource = &bc->io;
-
- bc->pc.index = num_bridges;
-
- bc->mem.name = "Bridge PCI MEM";
- bc->pc.mem_offset = offset;
- bc->mem.start = 0;
- bc->mem.end = ~0UL;
- bc->mem.flags = IORESOURCE_MEM;
-
- bc->io.name = "Bridge IO MEM";
- bc->pc.io_offset = offset;
- bc->io.start = 0UL;
- bc->io.end = ~0UL;
- bc->io.flags = IORESOURCE_IO;
-
- bc->widget_id = widget_id;
- bc->nasid = nasid;
-
- bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR;
-
- /*
- * point to this bridge
- */
- bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id);
-
- /*
- * Clear all pending interrupts.
- */
- bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
-
- /*
- * Until otherwise set up, assume all interrupts are from slot 0
- */
- bridge_write(bc, b_int_device, 0x0);
-
- /*
- * swap pio's to pci mem and io space (big windows)
- */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP |
- BRIDGE_CTRL_MEM_SWAP);
-#ifdef CONFIG_PAGE_SIZE_4KB
- bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#else /* 16kB or larger */
- bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#endif
-
- /*
- * Hmm... IRIX sets additional bits in the address which
- * are documented as reserved in the bridge docs.
- */
- bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16));
- bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
- bridge_write(bc, b_dir_map, (masterwid << 20)); /* DMA */
- bridge_write(bc, b_int_enable, 0);
-
- for (slot = 0; slot < 8; slot ++) {
- bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
- bc->pci_int[slot] = -1;
- }
- bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
-
- register_pci_controller(&bc->pc);
-
- num_bridges++;
-
- return 0;
-}
-
-/*
- * All observed requests have pin == 1. We could have a global here, that
- * gets incremented and returned every time - unfortunately, pci_map_irq
- * may be called on the same device over and over, and need to return the
- * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
- *
- * A given PCI device, in general, should be able to intr any of the cpus
- * on any one of the hubs connected to its xbow.
- */
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return 0;
-}
-
-static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
-{
- while (dev->bus->parent) {
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- }
-
- return dev;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct pci_dev *rdev = bridge_root_dev(dev);
- int slot = PCI_SLOT(rdev->devfn);
- int irq;
-
- irq = bc->pci_int[slot];
- if (irq == -1) {
- irq = request_bridge_irq(bc, slot);
- if (irq < 0)
- return irq;
-
- bc->pci_int[slot] = irq;
- }
- dev->irq = irq;
-
- return 0;
-}
dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
{
@@ -177,29 +22,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
return dma_addr & ~(0xffUL << 56);
}
-/*
- * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
- * to find the slot number in sense of the bridge device register.
- * XXX This also means multiple devices might rely on conflicting bridge
- * settings.
- */
-
-static inline void pci_disable_swapping(struct pci_dev *dev)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- struct bridge_regs *bridge = bc->base;
- int slot = PCI_SLOT(dev->devfn);
-
- /* Turn off byte swapping */
- bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
- bridge->b_widget.w_tflush; /* Flush */
-}
-
-static void pci_fixup_ioc3(struct pci_dev *d)
-{
- pci_disable_swapping(d);
-}
-
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
@@ -209,6 +31,3 @@ int pcibus_to_node(struct pci_bus *bus)
}
EXPORT_SYMBOL(pcibus_to_node);
#endif /* CONFIG_NUMA */
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
- pci_fixup_ioc3);