summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/pseries/eeh_pseries.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/pseries/eeh_pseries.c')
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pseries.c565
1 files changed, 565 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
new file mode 100644
index 000000000000..8752f79a6af8
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -0,0 +1,565 @@
+/*
+ * The file intends to implement the platform dependent EEH operations on pseries.
+ * Actually, the pseries platform is built based on RTAS heavily. That means the
+ * pseries platform dependent EEH operations will be built on RTAS calls. The functions
+ * are devired from arch/powerpc/platforms/pseries/eeh.c and necessary cleanup has
+ * been done.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2011.
+ * Copyright IBM Corporation 2001, 2005, 2006
+ * Copyright Dave Engebretsen & Todd Inglett 2001
+ * Copyright Linas Vepstas 2005, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/rbtree.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/rtas.h>
+
+/* RTAS tokens */
+static int ibm_set_eeh_option;
+static int ibm_set_slot_reset;
+static int ibm_read_slot_reset_state;
+static int ibm_read_slot_reset_state2;
+static int ibm_slot_error_detail;
+static int ibm_get_config_addr_info;
+static int ibm_get_config_addr_info2;
+static int ibm_configure_bridge;
+static int ibm_configure_pe;
+
+/*
+ * Buffer for reporting slot-error-detail rtas calls. Its here
+ * in BSS, and not dynamically alloced, so that it ends up in
+ * RMO where RTAS can access it.
+ */
+static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
+static DEFINE_SPINLOCK(slot_errbuf_lock);
+static int eeh_error_buf_size;
+
+/**
+ * pseries_eeh_init - EEH platform dependent initialization
+ *
+ * EEH platform dependent initialization on pseries.
+ */
+static int pseries_eeh_init(void)
+{
+ /* figure out EEH RTAS function call tokens */
+ ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
+ ibm_set_slot_reset = rtas_token("ibm,set-slot-reset");
+ ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
+ ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
+ ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
+ ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
+ ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
+ ibm_configure_pe = rtas_token("ibm,configure-pe");
+ ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
+
+ /* necessary sanity check */
+ if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n",
+ __func__);
+ return -EINVAL;
+ } else if (ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: RTAS service <ibm, set-slot-reset> invalid\n",
+ __func__);
+ return -EINVAL;
+ } else if (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
+ ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: RTAS service <ibm,read-slot-reset-state2> and "
+ "<ibm,read-slot-reset-state> invalid\n",
+ __func__);
+ return -EINVAL;
+ } else if (ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n",
+ __func__);
+ return -EINVAL;
+ } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE &&
+ ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and "
+ "<ibm,get-config-addr-info> invalid\n",
+ __func__);
+ return -EINVAL;
+ } else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
+ ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: RTAS service <ibm,configure-pe> and "
+ "<ibm,configure-bridge> invalid\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Initialize error log lock and size */
+ spin_lock_init(&slot_errbuf_lock);
+ eeh_error_buf_size = rtas_token("rtas-error-log-max");
+ if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
+ pr_warning("%s: unknown EEH error log size\n",
+ __func__);
+ eeh_error_buf_size = 1024;
+ } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
+ pr_warning("%s: EEH error log size %d exceeds the maximal %d\n",
+ __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
+ eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
+ }
+
+ return 0;
+}
+
+/**
+ * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
+ * @dn: device node
+ * @option: operation to be issued
+ *
+ * The function is used to control the EEH functionality globally.
+ * Currently, following options are support according to PAPR:
+ * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
+ */
+static int pseries_eeh_set_option(struct device_node *dn, int option)
+{
+ int ret = 0;
+ struct eeh_dev *edev;
+ const u32 *reg;
+ int config_addr;
+
+ edev = of_node_to_eeh_dev(dn);
+
+ /*
+ * When we're enabling or disabling EEH functioality on
+ * the particular PE, the PE config address is possibly
+ * unavailable. Therefore, we have to figure it out from
+ * the FDT node.
+ */
+ switch (option) {
+ case EEH_OPT_DISABLE:
+ case EEH_OPT_ENABLE:
+ reg = of_get_property(dn, "reg", NULL);
+ config_addr = reg[0];
+ break;
+
+ case EEH_OPT_THAW_MMIO:
+ case EEH_OPT_THAW_DMA:
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+ break;
+
+ default:
+ pr_err("%s: Invalid option %d\n",
+ __func__, option);
+ return -EINVAL;
+ }
+
+ ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), option);
+
+ return ret;
+}
+
+/**
+ * pseries_eeh_get_pe_addr - Retrieve PE address
+ * @dn: device node
+ *
+ * Retrieve the assocated PE address. Actually, there're 2 RTAS
+ * function calls dedicated for the purpose. We need implement
+ * it through the new function and then the old one. Besides,
+ * you should make sure the config address is figured out from
+ * FDT node before calling the function.
+ *
+ * It's notable that zero'ed return value means invalid PE config
+ * address.
+ */
+static int pseries_eeh_get_pe_addr(struct device_node *dn)
+{
+ struct eeh_dev *edev;
+ int ret = 0;
+ int rets[3];
+
+ edev = of_node_to_eeh_dev(dn);
+
+ if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
+ /*
+ * First of all, we need to make sure there has one PE
+ * associated with the device. Otherwise, PE address is
+ * meaningless.
+ */
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+ edev->config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), 1);
+ if (ret || (rets[0] == 0))
+ return 0;
+
+ /* Retrieve the associated PE config address */
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+ edev->config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), 0);
+ if (ret) {
+ pr_warning("%s: Failed to get PE address for %s\n",
+ __func__, dn->full_name);
+ return 0;
+ }
+
+ return rets[0];
+ }
+
+ if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
+ edev->config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), 0);
+ if (ret) {
+ pr_warning("%s: Failed to get PE address for %s\n",
+ __func__, dn->full_name);
+ return 0;
+ }
+
+ return rets[0];
+ }
+
+ return ret;
+}
+
+/**
+ * pseries_eeh_get_state - Retrieve PE state
+ * @dn: PE associated device node
+ * @state: return value
+ *
+ * Retrieve the state of the specified PE. On RTAS compliant
+ * pseries platform, there already has one dedicated RTAS function
+ * for the purpose. It's notable that the associated PE config address
+ * might be ready when calling the function. Therefore, endeavour to
+ * use the PE config address if possible. Further more, there're 2
+ * RTAS calls for the purpose, we need to try the new one and back
+ * to the old one if the new one couldn't work properly.
+ */
+static int pseries_eeh_get_state(struct device_node *dn, int *state)
+{
+ struct eeh_dev *edev;
+ int config_addr;
+ int ret;
+ int rets[4];
+ int result;
+
+ /* Figure out PE config address if possible */
+ edev = of_node_to_eeh_dev(dn);
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
+ /* Fake PE unavailable info */
+ rets[2] = 0;
+ ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else {
+ return EEH_STATE_NOT_SUPPORT;
+ }
+
+ if (ret)
+ return ret;
+
+ /* Parse the result out */
+ result = 0;
+ if (rets[1]) {
+ switch(rets[0]) {
+ case 0:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result |= EEH_STATE_MMIO_ACTIVE;
+ result |= EEH_STATE_DMA_ACTIVE;
+ break;
+ case 1:
+ result |= EEH_STATE_RESET_ACTIVE;
+ result |= EEH_STATE_MMIO_ACTIVE;
+ result |= EEH_STATE_DMA_ACTIVE;
+ break;
+ case 2:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result &= ~EEH_STATE_MMIO_ACTIVE;
+ result &= ~EEH_STATE_DMA_ACTIVE;
+ break;
+ case 4:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result &= ~EEH_STATE_MMIO_ACTIVE;
+ result &= ~EEH_STATE_DMA_ACTIVE;
+ result |= EEH_STATE_MMIO_ENABLED;
+ break;
+ case 5:
+ if (rets[2]) {
+ if (state) *state = rets[2];
+ result = EEH_STATE_UNAVAILABLE;
+ } else {
+ result = EEH_STATE_NOT_SUPPORT;
+ }
+ default:
+ result = EEH_STATE_NOT_SUPPORT;
+ }
+ } else {
+ result = EEH_STATE_NOT_SUPPORT;
+ }
+
+ return result;
+}
+
+/**
+ * pseries_eeh_reset - Reset the specified PE
+ * @dn: PE associated device node
+ * @option: reset option
+ *
+ * Reset the specified PE
+ */
+static int pseries_eeh_reset(struct device_node *dn, int option)
+{
+ struct eeh_dev *edev;
+ int config_addr;
+ int ret;
+
+ /* Figure out PE address */
+ edev = of_node_to_eeh_dev(dn);
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ /* Reset PE through RTAS call */
+ ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), option);
+
+ /* If fundamental-reset not supported, try hot-reset */
+ if (option == EEH_RESET_FUNDAMENTAL &&
+ ret == -8) {
+ ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid), EEH_RESET_HOT);
+ }
+
+ return ret;
+}
+
+/**
+ * pseries_eeh_wait_state - Wait for PE state
+ * @dn: PE associated device node
+ * @max_wait: maximal period in microsecond
+ *
+ * Wait for the state of associated PE. It might take some time
+ * to retrieve the PE's state.
+ */
+static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
+{
+ int ret;
+ int mwait;
+
+ /*
+ * According to PAPR, the state of PE might be temporarily
+ * unavailable. Under the circumstance, we have to wait
+ * for indicated time determined by firmware. The maximal
+ * wait time is 5 minutes, which is acquired from the original
+ * EEH implementation. Also, the original implementation
+ * also defined the minimal wait time as 1 second.
+ */
+#define EEH_STATE_MIN_WAIT_TIME (1000)
+#define EEH_STATE_MAX_WAIT_TIME (300 * 1000)
+
+ while (1) {
+ ret = pseries_eeh_get_state(dn, &mwait);
+
+ /*
+ * If the PE's state is temporarily unavailable,
+ * we have to wait for the specified time. Otherwise,
+ * the PE's state will be returned immediately.
+ */
+ if (ret != EEH_STATE_UNAVAILABLE)
+ return ret;
+
+ if (max_wait <= 0) {
+ pr_warning("%s: Timeout when getting PE's state (%d)\n",
+ __func__, max_wait);
+ return EEH_STATE_NOT_SUPPORT;
+ }
+
+ if (mwait <= 0) {
+ pr_warning("%s: Firmware returned bad wait value %d\n",
+ __func__, mwait);
+ mwait = EEH_STATE_MIN_WAIT_TIME;
+ } else if (mwait > EEH_STATE_MAX_WAIT_TIME) {
+ pr_warning("%s: Firmware returned too long wait value %d\n",
+ __func__, mwait);
+ mwait = EEH_STATE_MAX_WAIT_TIME;
+ }
+
+ max_wait -= mwait;
+ msleep(mwait);
+ }
+
+ return EEH_STATE_NOT_SUPPORT;
+}
+
+/**
+ * pseries_eeh_get_log - Retrieve error log
+ * @dn: device node
+ * @severity: temporary or permanent error log
+ * @drv_log: driver log to be combined with retrieved error log
+ * @len: length of driver log
+ *
+ * Retrieve the temporary or permanent error from the PE.
+ * Actually, the error will be retrieved through the dedicated
+ * RTAS call.
+ */
+static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len)
+{
+ struct eeh_dev *edev;
+ int config_addr;
+ unsigned long flags;
+ int ret;
+
+ edev = of_node_to_eeh_dev(dn);
+ spin_lock_irqsave(&slot_errbuf_lock, flags);
+ memset(slot_errbuf, 0, eeh_error_buf_size);
+
+ /* Figure out the PE address */
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr,
+ BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid),
+ virt_to_phys(drv_log), len,
+ virt_to_phys(slot_errbuf), eeh_error_buf_size,
+ severity);
+ if (!ret)
+ log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
+ spin_unlock_irqrestore(&slot_errbuf_lock, flags);
+
+ return ret;
+}
+
+/**
+ * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE
+ * @dn: PE associated device node
+ *
+ * The function will be called to reconfigure the bridges included
+ * in the specified PE so that the mulfunctional PE would be recovered
+ * again.
+ */
+static int pseries_eeh_configure_bridge(struct device_node *dn)
+{
+ struct eeh_dev *edev;
+ int config_addr;
+ int ret;
+
+ /* Figure out the PE address */
+ edev = of_node_to_eeh_dev(dn);
+ config_addr = edev->config_addr;
+ if (edev->pe_config_addr)
+ config_addr = edev->pe_config_addr;
+
+ /* Use new configure-pe function, if supported */
+ if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
+ config_addr, BUID_HI(edev->phb->buid),
+ BUID_LO(edev->phb->buid));
+ } else {
+ return -EFAULT;
+ }
+
+ if (ret)
+ pr_warning("%s: Unable to configure bridge %d for %s\n",
+ __func__, ret, dn->full_name);
+
+ return ret;
+}
+
+/**
+ * pseries_eeh_read_config - Read PCI config space
+ * @dn: device node
+ * @where: PCI address
+ * @size: size to read
+ * @val: return value
+ *
+ * Read config space from the speicifed device
+ */
+static int pseries_eeh_read_config(struct device_node *dn, int where, int size, u32 *val)
+{
+ struct pci_dn *pdn;
+
+ pdn = PCI_DN(dn);
+
+ return rtas_read_config(pdn, where, size, val);
+}
+
+/**
+ * pseries_eeh_write_config - Write PCI config space
+ * @dn: device node
+ * @where: PCI address
+ * @size: size to write
+ * @val: value to be written
+ *
+ * Write config space to the specified device
+ */
+static int pseries_eeh_write_config(struct device_node *dn, int where, int size, u32 val)
+{
+ struct pci_dn *pdn;
+
+ pdn = PCI_DN(dn);
+
+ return rtas_write_config(pdn, where, size, val);
+}
+
+static struct eeh_ops pseries_eeh_ops = {
+ .name = "pseries",
+ .init = pseries_eeh_init,
+ .set_option = pseries_eeh_set_option,
+ .get_pe_addr = pseries_eeh_get_pe_addr,
+ .get_state = pseries_eeh_get_state,
+ .reset = pseries_eeh_reset,
+ .wait_state = pseries_eeh_wait_state,
+ .get_log = pseries_eeh_get_log,
+ .configure_bridge = pseries_eeh_configure_bridge,
+ .read_config = pseries_eeh_read_config,
+ .write_config = pseries_eeh_write_config
+};
+
+/**
+ * eeh_pseries_init - Register platform dependent EEH operations
+ *
+ * EEH initialization on pseries platform. This function should be
+ * called before any EEH related functions.
+ */
+int __init eeh_pseries_init(void)
+{
+ return eeh_ops_register(&pseries_eeh_ops);
+}