summaryrefslogtreecommitdiffstats
path: root/arch/tile/kernel/intvec_32.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile/kernel/intvec_32.S')
-rw-r--r--arch/tile/kernel/intvec_32.S101
1 files changed, 54 insertions, 47 deletions
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index 8f58bdff20d7..f5821626247f 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -32,8 +32,8 @@
# error "No support for kernel preemption currently"
#endif
-#if INT_INTCTRL_1 < 32 || INT_INTCTRL_1 >= 48
-# error INT_INTCTRL_1 coded to set high interrupt mask
+#if INT_INTCTRL_K < 32 || INT_INTCTRL_K >= 48
+# error INT_INTCTRL_K coded to set high interrupt mask
#endif
#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)
@@ -132,8 +132,8 @@ intvec_\vecname:
/* Temporarily save a register so we have somewhere to work. */
- mtspr SYSTEM_SAVE_1_1, r0
- mfspr r0, EX_CONTEXT_1_1
+ mtspr SPR_SYSTEM_SAVE_K_1, r0
+ mfspr r0, SPR_EX_CONTEXT_K_1
/* The cmpxchg code clears sp to force us to reset it here on fault. */
{
@@ -167,18 +167,18 @@ intvec_\vecname:
* The page_fault handler may be downcalled directly by the
* hypervisor even when Linux is running and has ICS set.
*
- * In this case the contents of EX_CONTEXT_1_1 reflect the
+ * In this case the contents of EX_CONTEXT_K_1 reflect the
* previous fault and can't be relied on to choose whether or
* not to reinitialize the stack pointer. So we add a test
- * to see whether SYSTEM_SAVE_1_2 has the high bit set,
+ * to see whether SYSTEM_SAVE_K_2 has the high bit set,
* and if so we don't reinitialize sp, since we must be coming
* from Linux. (In fact the precise case is !(val & ~1),
* but any Linux PC has to have the high bit set.)
*
- * Note that the hypervisor *always* sets SYSTEM_SAVE_1_2 for
+ * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for
* any path that turns into a downcall to one of our TLB handlers.
*/
- mfspr r0, SYSTEM_SAVE_1_2
+ mfspr r0, SPR_SYSTEM_SAVE_K_2
{
blz r0, 0f /* high bit in S_S_1_2 is for a PC to use */
move r0, sp
@@ -187,12 +187,12 @@ intvec_\vecname:
2:
/*
- * SYSTEM_SAVE_1_0 holds the cpu number in the low bits, and
+ * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and
* the current stack top in the higher bits. So we recover
* our stack top by just masking off the low bits, then
* point sp at the top aligned address on the actual stack page.
*/
- mfspr r0, SYSTEM_SAVE_1_0
+ mfspr r0, SPR_SYSTEM_SAVE_K_0
mm r0, r0, zero, LOG2_THREAD_SIZE, 31
0:
@@ -254,7 +254,7 @@ intvec_\vecname:
sw sp, r3
addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3)
}
- mfspr r0, EX_CONTEXT_1_0
+ mfspr r0, SPR_EX_CONTEXT_K_0
.ifc \processing,handle_syscall
/*
* Bump the saved PC by one bundle so that when we return, we won't
@@ -267,7 +267,7 @@ intvec_\vecname:
sw sp, r0
addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
}
- mfspr r0, EX_CONTEXT_1_1
+ mfspr r0, SPR_EX_CONTEXT_K_1
{
sw sp, r0
addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
@@ -289,7 +289,7 @@ intvec_\vecname:
.endif
addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM
}
- mfspr r0, SYSTEM_SAVE_1_1 /* Original r0 */
+ mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */
{
sw sp, r0
addi sp, sp, -PTREGS_OFFSET_REG(0) - 4
@@ -309,12 +309,12 @@ intvec_\vecname:
* See discussion below at "finish_interrupt_save".
*/
.ifc \c_routine, do_page_fault
- mfspr r2, SYSTEM_SAVE_1_3 /* address of page fault */
- mfspr r3, SYSTEM_SAVE_1_2 /* info about page fault */
+ mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */
+ mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */
.else
.ifc \vecnum, INT_DOUBLE_FAULT
{
- mfspr r2, SYSTEM_SAVE_1_2 /* double fault info from HV */
+ mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */
movei r3, 0
}
.else
@@ -467,7 +467,7 @@ intvec_\vecname:
/* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
{
- mfspr r20, SYSTEM_SAVE_1_0
+ mfspr r20, SPR_SYSTEM_SAVE_K_0
moveli r21, lo16(__per_cpu_offset)
}
{
@@ -487,7 +487,7 @@ intvec_\vecname:
* We load flags in r32 here so we can jump to .Lrestore_regs
* directly after do_page_fault_ics() if necessary.
*/
- mfspr r32, EX_CONTEXT_1_1
+ mfspr r32, SPR_EX_CONTEXT_K_1
{
andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
@@ -957,11 +957,11 @@ STD_ENTRY(interrupt_return)
pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1
{
- mtspr EX_CONTEXT_1_0, r21
+ mtspr SPR_EX_CONTEXT_K_0, r21
move r5, zero
}
{
- mtspr EX_CONTEXT_1_1, lr
+ mtspr SPR_EX_CONTEXT_K_1, lr
andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
}
@@ -1020,7 +1020,7 @@ STD_ENTRY(interrupt_return)
/* Set r1 to errno if we are returning an error, otherwise zero. */
{
- moveli r29, 1024
+ moveli r29, 4096
sub r1, zero, r0
}
slt_u r29, r1, r29
@@ -1199,7 +1199,7 @@ STD_ENTRY(interrupt_return)
STD_ENDPROC(interrupt_return)
/*
- * This interrupt variant clears the INT_INTCTRL_1 interrupt mask bit
+ * This interrupt variant clears the INT_INTCTRL_K interrupt mask bit
* before returning, so we can properly get more downcalls.
*/
.pushsection .text.handle_interrupt_downcall,"ax"
@@ -1208,11 +1208,11 @@ handle_interrupt_downcall:
check_single_stepping normal, .Ldispatch_downcall
.Ldispatch_downcall:
- /* Clear INTCTRL_1 from the set of interrupts we ever enable. */
+ /* Clear INTCTRL_K from the set of interrupts we ever enable. */
GET_INTERRUPTS_ENABLED_MASK_PTR(r30)
{
addi r30, r30, 4
- movei r31, INT_MASK(INT_INTCTRL_1)
+ movei r31, INT_MASK(INT_INTCTRL_K)
}
{
lw r20, r30
@@ -1227,7 +1227,7 @@ handle_interrupt_downcall:
}
FEEDBACK_REENTER(handle_interrupt_downcall)
- /* Allow INTCTRL_1 to be enabled next time we enable interrupts. */
+ /* Allow INTCTRL_K to be enabled next time we enable interrupts. */
lw r20, r30
or r20, r20, r31
sw r30, r20
@@ -1472,7 +1472,12 @@ handle_ill:
lw r26, r24
sw r28, r26
- /* Clear TIF_SINGLESTEP */
+ /*
+ * Clear TIF_SINGLESTEP to prevent recursion if we execute an ill.
+ * The normal non-arch flow redundantly clears TIF_SINGLESTEP, but we
+ * need to clear it here and can't really impose on all other arches.
+ * So what's another write between friends?
+ */
GET_THREAD_INFO(r0)
addi r1, r0, THREAD_INFO_FLAGS_OFFSET
@@ -1509,7 +1514,7 @@ handle_ill:
/* Various stub interrupt handlers and syscall handlers */
STD_ENTRY_LOCAL(_kernel_double_fault)
- mfspr r1, EX_CONTEXT_1_0
+ mfspr r1, SPR_EX_CONTEXT_K_0
move r2, lr
move r3, sp
move r4, r52
@@ -1518,34 +1523,29 @@ STD_ENTRY_LOCAL(_kernel_double_fault)
STD_ENDPROC(_kernel_double_fault)
STD_ENTRY_LOCAL(bad_intr)
- mfspr r2, EX_CONTEXT_1_0
+ mfspr r2, SPR_EX_CONTEXT_K_0
panic "Unhandled interrupt %#x: PC %#lx"
STD_ENDPROC(bad_intr)
/* Put address of pt_regs in reg and jump. */
#define PTREGS_SYSCALL(x, reg) \
- STD_ENTRY(x); \
+ STD_ENTRY(_##x); \
{ \
PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
- j _##x \
+ j x \
}; \
- STD_ENDPROC(x)
+ STD_ENDPROC(_##x)
PTREGS_SYSCALL(sys_execve, r3)
PTREGS_SYSCALL(sys_sigaltstack, r2)
PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
-/* Save additional callee-saves to pt_regs, put address in reg and jump. */
-#define PTREGS_SYSCALL_ALL_REGS(x, reg) \
- STD_ENTRY(x); \
- push_extra_callee_saves reg; \
- j _##x; \
- STD_ENDPROC(x)
-
-PTREGS_SYSCALL_ALL_REGS(sys_fork, r0)
-PTREGS_SYSCALL_ALL_REGS(sys_vfork, r0)
-PTREGS_SYSCALL_ALL_REGS(sys_clone, r4)
-PTREGS_SYSCALL_ALL_REGS(sys_cmpxchg_badaddr, r1)
+/* Save additional callee-saves to pt_regs, put address in r4 and jump. */
+STD_ENTRY(_sys_clone)
+ push_extra_callee_saves r4
+ j sys_clone
+ STD_ENDPROC(_sys_clone)
/*
* This entrypoint is taken for the cmpxchg and atomic_update fast
@@ -1558,12 +1558,14 @@ PTREGS_SYSCALL_ALL_REGS(sys_cmpxchg_badaddr, r1)
* to be available to it on entry. It does not modify any callee-save
* registers (including "lr"). It does not check what PL it is being
* called at, so you'd better not call it other than at PL0.
+ * The <atomic.h> wrapper assumes it only clobbers r20-r29, so if
+ * it ever is necessary to use more registers, be aware.
*
* It does not use the stack, but since it might be re-interrupted by
* a page fault which would assume the stack was valid, it does
* save/restore the stack pointer and zero it out to make sure it gets reset.
* Since we always keep interrupts disabled, the hypervisor won't
- * clobber our EX_CONTEXT_1_x registers, so we don't save/restore them
+ * clobber our EX_CONTEXT_K_x registers, so we don't save/restore them
* (other than to advance the PC on return).
*
* We have to manually validate the user vs kernel address range
@@ -1769,7 +1771,7 @@ ENTRY(sys_cmpxchg)
/* Do slow mtspr here so the following "mf" waits less. */
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
mf
@@ -1788,7 +1790,7 @@ ENTRY(sys_cmpxchg)
}
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
iret
@@ -1816,7 +1818,7 @@ ENTRY(sys_cmpxchg)
#endif
/* Issue the slow SPR here while the tns result is in flight. */
- mfspr r28, EX_CONTEXT_1_0
+ mfspr r28, SPR_EX_CONTEXT_K_0
{
addi r28, r28, 8 /* return to the instruction after the swint1 */
@@ -1904,7 +1906,7 @@ ENTRY(sys_cmpxchg)
.Lcmpxchg64_mismatch:
{
move sp, r27
- mtspr EX_CONTEXT_1_0, r28
+ mtspr SPR_EX_CONTEXT_K_0, r28
}
mf
{
@@ -1985,8 +1987,13 @@ int_unalign:
int_hand INT_PERF_COUNT, PERF_COUNT, \
op_handle_perf_interrupt, handle_nmi
int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr
+#if CONFIG_KERNEL_PL == 2
+ dc_dispatch INT_INTCTRL_2, INTCTRL_2
+ int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr
+#else
int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr
dc_dispatch INT_INTCTRL_1, INTCTRL_1
+#endif
int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr
int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \
hv_message_intr, handle_interrupt_downcall