summaryrefslogtreecommitdiffstats
path: root/arch/x86/entry/calling.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/entry/calling.h')
-rw-r--r--arch/x86/entry/calling.h145
1 files changed, 145 insertions, 0 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 3fd8bc560fae..45a63e00a6af 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -1,6 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/jump_label.h>
#include <asm/unwind_hints.h>
+#include <asm/cpufeatures.h>
+#include <asm/page_types.h>
+#include <asm/percpu.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
/*
@@ -187,6 +192,146 @@ For 32-bit we have the following conventions - kernel is built with
#endif
.endm
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+
+/*
+ * PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two
+ * halves:
+ */
+#define PTI_SWITCH_PGTABLES_MASK (1<<PAGE_SHIFT)
+#define PTI_SWITCH_MASK (PTI_SWITCH_PGTABLES_MASK|(1<<X86_CR3_PTI_SWITCH_BIT))
+
+.macro SET_NOFLUSH_BIT reg:req
+ bts $X86_CR3_PCID_NOFLUSH_BIT, \reg
+.endm
+
+.macro ADJUST_KERNEL_CR3 reg:req
+ ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID
+ /* Clear PCID and "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */
+ andq $(~PTI_SWITCH_MASK), \reg
+.endm
+
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+ ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+ mov %cr3, \scratch_reg
+ ADJUST_KERNEL_CR3 \scratch_reg
+ mov \scratch_reg, %cr3
+.Lend_\@:
+.endm
+
+#define THIS_CPU_user_pcid_flush_mask \
+ PER_CPU_VAR(cpu_tlbstate) + TLB_STATE_user_pcid_flush_mask
+
+.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
+ ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+ mov %cr3, \scratch_reg
+
+ ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
+
+ /*
+ * Test if the ASID needs a flush.
+ */
+ movq \scratch_reg, \scratch_reg2
+ andq $(0x7FF), \scratch_reg /* mask ASID */
+ bt \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ jnc .Lnoflush_\@
+
+ /* Flush needed, clear the bit */
+ btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ movq \scratch_reg2, \scratch_reg
+ jmp .Lwrcr3_\@
+
+.Lnoflush_\@:
+ movq \scratch_reg2, \scratch_reg
+ SET_NOFLUSH_BIT \scratch_reg
+
+.Lwrcr3_\@:
+ /* Flip the PGD and ASID to the user version */
+ orq $(PTI_SWITCH_MASK), \scratch_reg
+ mov \scratch_reg, %cr3
+.Lend_\@:
+.endm
+
+.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
+ pushq %rax
+ SWITCH_TO_USER_CR3_NOSTACK scratch_reg=\scratch_reg scratch_reg2=%rax
+ popq %rax
+.endm
+
+.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
+ ALTERNATIVE "jmp .Ldone_\@", "", X86_FEATURE_PTI
+ movq %cr3, \scratch_reg
+ movq \scratch_reg, \save_reg
+ /*
+ * Is the "switch mask" all zero? That means that both of
+ * these are zero:
+ *
+ * 1. The user/kernel PCID bit, and
+ * 2. The user/kernel "bit" that points CR3 to the
+ * bottom half of the 8k PGD
+ *
+ * That indicates a kernel CR3 value, not a user CR3.
+ */
+ testq $(PTI_SWITCH_MASK), \scratch_reg
+ jz .Ldone_\@
+
+ ADJUST_KERNEL_CR3 \scratch_reg
+ movq \scratch_reg, %cr3
+
+.Ldone_\@:
+.endm
+
+.macro RESTORE_CR3 scratch_reg:req save_reg:req
+ ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+
+ ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
+
+ /*
+ * KERNEL pages can always resume with NOFLUSH as we do
+ * explicit flushes.
+ */
+ bt $X86_CR3_PTI_SWITCH_BIT, \save_reg
+ jnc .Lnoflush_\@
+
+ /*
+ * Check if there's a pending flush for the user ASID we're
+ * about to set.
+ */
+ movq \save_reg, \scratch_reg
+ andq $(0x7FF), \scratch_reg
+ bt \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ jnc .Lnoflush_\@
+
+ btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ jmp .Lwrcr3_\@
+
+.Lnoflush_\@:
+ SET_NOFLUSH_BIT \save_reg
+
+.Lwrcr3_\@:
+ /*
+ * The CR3 write could be avoided when not changing its value,
+ * but would require a CR3 read *and* a scratch register.
+ */
+ movq \save_reg, %cr3
+.Lend_\@:
+.endm
+
+#else /* CONFIG_PAGE_TABLE_ISOLATION=n: */
+
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+.endm
+.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
+.endm
+.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
+.endm
+.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
+.endm
+.macro RESTORE_CR3 scratch_reg:req save_reg:req
+.endm
+
+#endif
+
#endif /* CONFIG_X86_64 */
/*