summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci_ceva.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ahci_ceva.c')
-rw-r--r--drivers/ata/ahci_ceva.c197
1 files changed, 159 insertions, 38 deletions
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index 207649d323c5..5ecc9d46cb54 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -32,15 +32,27 @@
#define AHCI_VEND_PP3C 0xB0
#define AHCI_VEND_PP4C 0xB4
#define AHCI_VEND_PP5C 0xB8
+#define AHCI_VEND_AXICC 0xBC
#define AHCI_VEND_PAXIC 0xC0
#define AHCI_VEND_PTC 0xC8
/* Vendor Specific Register bit definitions */
#define PAXIC_ADBW_BW64 0x1
-#define PAXIC_MAWIDD (1 << 8)
-#define PAXIC_MARIDD (1 << 16)
+#define PAXIC_MAWID(i) (((i) * 2) << 4)
+#define PAXIC_MARID(i) (((i) * 2) << 12)
+#define PAXIC_MARIDD(i) ((((i) * 2) + 1) << 16)
+#define PAXIC_MAWIDD(i) ((((i) * 2) + 1) << 8)
#define PAXIC_OTL (0x4 << 20)
+/* Register bit definitions for cache control */
+#define AXICC_ARCA_VAL (0xF << 0)
+#define AXICC_ARCF_VAL (0xF << 4)
+#define AXICC_ARCH_VAL (0xF << 8)
+#define AXICC_ARCP_VAL (0xF << 12)
+#define AXICC_AWCFD_VAL (0xF << 16)
+#define AXICC_AWCD_VAL (0xF << 20)
+#define AXICC_AWCF_VAL (0xF << 24)
+
#define PCFG_TPSS_VAL (0x32 << 16)
#define PCFG_TPRS_VAL (0x2 << 12)
#define PCFG_PAD_VAL 0x2
@@ -50,21 +62,6 @@
#define PPCFG_PSS_EN (1 << 29)
#define PPCFG_ESDF_EN (1 << 31)
-#define PP2C_CIBGMN 0x0F
-#define PP2C_CIBGMX (0x25 << 8)
-#define PP2C_CIBGN (0x18 << 16)
-#define PP2C_CINMP (0x29 << 24)
-
-#define PP3C_CWBGMN 0x04
-#define PP3C_CWBGMX (0x0B << 8)
-#define PP3C_CWBGN (0x08 << 16)
-#define PP3C_CWNMP (0x0F << 24)
-
-#define PP4C_BMX 0x0a
-#define PP4C_BNM (0x08 << 8)
-#define PP4C_SFD (0x4a << 16)
-#define PP4C_PTST (0x06 << 24)
-
#define PP5C_RIT 0x60216
#define PP5C_RCT (0x7f0 << 20)
@@ -75,6 +72,7 @@
#define PORT1_BASE 0x180
/* Port Control Register Bit Definitions */
+#define PORT_SCTL_SPD_GEN3 (0x3 << 4)
#define PORT_SCTL_SPD_GEN2 (0x2 << 4)
#define PORT_SCTL_SPD_GEN1 (0x1 << 4)
#define PORT_SCTL_IPM (0x3 << 8)
@@ -85,13 +83,43 @@
#define DRV_NAME "ahci-ceva"
#define CEVA_FLAG_BROKEN_GEN2 1
+static unsigned int rx_watermark = PTC_RX_WM_VAL;
+module_param(rx_watermark, uint, 0644);
+MODULE_PARM_DESC(rx_watermark, "RxWaterMark value (0 - 0x80)");
+
struct ceva_ahci_priv {
struct platform_device *ahci_pdev;
+ /* Port Phy2Cfg Register */
+ u32 pp2c[NR_PORTS];
+ u32 pp3c[NR_PORTS];
+ u32 pp4c[NR_PORTS];
+ u32 pp5c[NR_PORTS];
+ /* Axi Cache Control Register */
+ u32 axicc;
+ bool is_cci_enabled;
int flags;
};
+static unsigned int ceva_ahci_read_id(struct ata_device *dev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ u32 err_mask;
+
+ err_mask = ata_do_dev_read_id(dev, tf, id);
+ if (err_mask)
+ return err_mask;
+ /*
+ * Since CEVA controller does not support device sleep feature, we
+ * need to clear DEVSLP (bit 8) in word78 of the IDENTIFY DEVICE data.
+ */
+ id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
+
+ return 0;
+}
+
static struct ata_port_operations ahci_ceva_ops = {
.inherits = &ahci_platform_ops,
+ .read_id = ceva_ahci_read_id,
};
static const struct ata_port_info ahci_ceva_port_info = {
@@ -108,14 +136,6 @@ static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
u32 tmp;
int i;
- /*
- * AXI Data bus width to 64
- * Set Mem Addr Read, Write ID for data transfers
- * Transfer limit to 72 DWord
- */
- tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
- writel(tmp, mmio + AHCI_VEND_PAXIC);
-
/* Set AHCI Enable */
tmp = readl(mmio + HOST_CTL);
tmp |= HOST_AHCI_EN;
@@ -126,32 +146,48 @@ static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
writel(tmp, mmio + AHCI_VEND_PCFG);
+ /*
+ * AXI Data bus width to 64
+ * Set Mem Addr Read, Write ID for data transfers
+ * Set Mem Addr Read ID, Write ID for non-data transfers
+ * Transfer limit to 72 DWord
+ */
+ tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD(i) | PAXIC_MARIDD(i) |
+ PAXIC_MAWID(i) | PAXIC_MARID(i) | PAXIC_OTL;
+ writel(tmp, mmio + AHCI_VEND_PAXIC);
+
+ /* Set AXI cache control register if CCi is enabled */
+ if (cevapriv->is_cci_enabled) {
+ tmp = readl(mmio + AHCI_VEND_AXICC);
+ tmp |= AXICC_ARCA_VAL | AXICC_ARCF_VAL |
+ AXICC_ARCH_VAL | AXICC_ARCP_VAL |
+ AXICC_AWCFD_VAL | AXICC_AWCD_VAL |
+ AXICC_AWCF_VAL;
+ writel(tmp, mmio + AHCI_VEND_AXICC);
+ }
+
/* Port Phy Cfg register enables */
tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
writel(tmp, mmio + AHCI_VEND_PPCFG);
/* Phy Control OOB timing parameters COMINIT */
- tmp = PP2C_CIBGMN | PP2C_CIBGMX | PP2C_CIBGN | PP2C_CINMP;
- writel(tmp, mmio + AHCI_VEND_PP2C);
+ writel(cevapriv->pp2c[i], mmio + AHCI_VEND_PP2C);
/* Phy Control OOB timing parameters COMWAKE */
- tmp = PP3C_CWBGMN | PP3C_CWBGMX | PP3C_CWBGN | PP3C_CWNMP;
- writel(tmp, mmio + AHCI_VEND_PP3C);
+ writel(cevapriv->pp3c[i], mmio + AHCI_VEND_PP3C);
/* Phy Control Burst timing setting */
- tmp = PP4C_BMX | PP4C_BNM | PP4C_SFD | PP4C_PTST;
- writel(tmp, mmio + AHCI_VEND_PP4C);
+ writel(cevapriv->pp4c[i], mmio + AHCI_VEND_PP4C);
/* Rate Change Timer and Retry Interval Timer setting */
- tmp = PP5C_RIT | PP5C_RCT;
- writel(tmp, mmio + AHCI_VEND_PP5C);
+ writel(cevapriv->pp5c[i], mmio + AHCI_VEND_PP5C);
/* Rx Watermark setting */
- tmp = PTC_RX_WM_VAL | PTC_RSVD;
+ tmp = rx_watermark | PTC_RSVD;
writel(tmp, mmio + AHCI_VEND_PTC);
- /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
- tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM;
+ /* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */
+ tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
@@ -168,6 +204,7 @@ static int ceva_ahci_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct ceva_ahci_priv *cevapriv;
+ enum dev_dma_attr attr;
int rc;
cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
@@ -187,6 +224,65 @@ static int ceva_ahci_probe(struct platform_device *pdev)
if (of_property_read_bool(np, "ceva,broken-gen2"))
cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
+ /* Read OOB timing value for COMINIT from device-tree */
+ if (of_property_read_u8_array(np, "ceva,p0-cominit-params",
+ (u8 *)&cevapriv->pp2c[0], 4) < 0) {
+ dev_warn(dev, "ceva,p0-cominit-params property not defined\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u8_array(np, "ceva,p1-cominit-params",
+ (u8 *)&cevapriv->pp2c[1], 4) < 0) {
+ dev_warn(dev, "ceva,p1-cominit-params property not defined\n");
+ return -EINVAL;
+ }
+
+ /* Read OOB timing value for COMWAKE from device-tree*/
+ if (of_property_read_u8_array(np, "ceva,p0-comwake-params",
+ (u8 *)&cevapriv->pp3c[0], 4) < 0) {
+ dev_warn(dev, "ceva,p0-comwake-params property not defined\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u8_array(np, "ceva,p1-comwake-params",
+ (u8 *)&cevapriv->pp3c[1], 4) < 0) {
+ dev_warn(dev, "ceva,p1-comwake-params property not defined\n");
+ return -EINVAL;
+ }
+
+ /* Read phy BURST timing value from device-tree */
+ if (of_property_read_u8_array(np, "ceva,p0-burst-params",
+ (u8 *)&cevapriv->pp4c[0], 4) < 0) {
+ dev_warn(dev, "ceva,p0-burst-params property not defined\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u8_array(np, "ceva,p1-burst-params",
+ (u8 *)&cevapriv->pp4c[1], 4) < 0) {
+ dev_warn(dev, "ceva,p1-burst-params property not defined\n");
+ return -EINVAL;
+ }
+
+ /* Read phy RETRY interval timing value from device-tree */
+ if (of_property_read_u16_array(np, "ceva,p0-retry-params",
+ (u16 *)&cevapriv->pp5c[0], 2) < 0) {
+ dev_warn(dev, "ceva,p0-retry-params property not defined\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u16_array(np, "ceva,p1-retry-params",
+ (u16 *)&cevapriv->pp5c[1], 2) < 0) {
+ dev_warn(dev, "ceva,p1-retry-params property not defined\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Check if CCI is enabled for SATA. The DEV_DMA_COHERENT is returned
+ * if CCI is enabled, so check for DEV_DMA_COHERENT.
+ */
+ attr = device_get_dma_attr(dev);
+ cevapriv->is_cci_enabled = (attr == DEV_DMA_COHERENT);
+
hpriv->plat_data = cevapriv;
/* CEVA specific initialization */
@@ -206,12 +302,37 @@ disable_resources:
static int __maybe_unused ceva_ahci_suspend(struct device *dev)
{
- return ahci_platform_suspend_host(dev);
+ return ahci_platform_suspend(dev);
}
static int __maybe_unused ceva_ahci_resume(struct device *dev)
{
- return ahci_platform_resume_host(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ /* Configure CEVA specific config before resuming HBA */
+ ahci_ceva_setup(hpriv);
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ /* We resumed so update PM runtime state */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+
+ return rc;
}
static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);