summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/libata-scsi.c24
-rw-r--r--drivers/ata/pata_legacy.c2
-rw-r--r--drivers/ata/pata_octeon_cf.c2
-rw-r--r--drivers/ata/sata_via.c9
4 files changed, 19 insertions, 18 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d050e073e570..66aa4bee80a6 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2552,8 +2552,11 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
*
* If door lock fails, always clear sdev->locked to
* avoid this infinite loop.
+ *
+ * This may happen before SCSI scan is complete. Make
+ * sure qc->dev->sdev isn't NULL before dereferencing.
*/
- if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+ if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
qc->dev->sdev->locked = 0;
qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
@@ -3163,8 +3166,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
/**
* ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
+ * @shost: SCSI host of command to be sent
* @cmd: SCSI command to be sent
- * @done: Completion function, called when command is complete
*
* In some cases, this function translates SCSI commands into
* ATA taskfiles, and queues the taskfiles to be sent to
@@ -3174,37 +3177,36 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
* ATA and ATAPI devices appearing as SCSI devices.
*
* LOCKING:
- * Releases scsi-layer-held lock, and obtains host lock.
+ * ATA host lock
*
* RETURNS:
* Return value from __ata_scsi_queuecmd() if @cmd can be queued,
* 0 otherwise.
*/
-int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
{
struct ata_port *ap;
struct ata_device *dev;
struct scsi_device *scsidev = cmd->device;
- struct Scsi_Host *shost = scsidev->host;
int rc = 0;
+ unsigned long irq_flags;
ap = ata_shost_to_port(shost);
- spin_unlock(shost->host_lock);
- spin_lock(ap->lock);
+ spin_lock_irqsave(ap->lock, irq_flags);
ata_scsi_dump_cdb(ap, cmd);
dev = ata_scsi_find_dev(ap, scsidev);
if (likely(dev))
- rc = __ata_scsi_queuecmd(cmd, done, dev);
+ rc = __ata_scsi_queuecmd(cmd, cmd->scsi_done, dev);
else {
cmd->result = (DID_BAD_TARGET << 16);
- done(cmd);
+ cmd->scsi_done(cmd);
}
- spin_unlock(ap->lock);
- spin_lock(shost->host_lock);
+ spin_unlock_irqrestore(ap->lock, irq_flags);
+
return rc;
}
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index eaf194138f21..6bd9425ba5ab 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -142,7 +142,7 @@ static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
-#ifdef PATA_WINBOND_VLB_MODULE
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
static int winbond = 1; /* Set to probe Winbond controllers,
give I/O port if non standard */
#else
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 74b829817891..fa1b95a9a7ff 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,8 +653,6 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
ap = host->ports[i];
ocd = ap->dev->platform_data;
-
- ocd = ap->dev->platform_data;
cf_port = ap->private_data;
dma_int.u64 =
cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine));
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c21589986c69..8b677bbf2d37 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -538,7 +538,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
return 0;
}
-static void svia_configure(struct pci_dev *pdev)
+static void svia_configure(struct pci_dev *pdev, int board_id)
{
u8 tmp8;
@@ -577,7 +577,7 @@ static void svia_configure(struct pci_dev *pdev)
}
/*
- * vt6421 has problems talking to some drives. The following
+ * vt6420/1 has problems talking to some drives. The following
* is the fix from Joseph Chan <JosephChan@via.com.tw>.
*
* When host issues HOLD, device may send up to 20DW of data
@@ -596,8 +596,9 @@ static void svia_configure(struct pci_dev *pdev)
*
* https://bugzilla.kernel.org/show_bug.cgi?id=15173
* http://article.gmane.org/gmane.linux.ide/46352
+ * http://thread.gmane.org/gmane.linux.kernel/1062139
*/
- if (pdev->device == 0x3249) {
+ if (board_id == vt6420 || board_id == vt6421) {
pci_read_config_byte(pdev, 0x52, &tmp8);
tmp8 |= 1 << 2;
pci_write_config_byte(pdev, 0x52, tmp8);
@@ -652,7 +653,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- svia_configure(pdev);
+ svia_configure(pdev, board_id);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,