diff options
Diffstat (limited to 'drivers/ata')
59 files changed, 503 insertions, 1002 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index f031b8732330..ad1f59c1b3fc 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -2,11 +2,9 @@ # SATA/PATA driver configuration # -menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" +menuconfig ATA + tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" depends on HAS_IOMEM - -config ATA - tristate "ATA device support" depends on BLOCK depends on !(M32R || M68K) || BROKEN depends on !SUN4 || BROKEN @@ -24,6 +22,19 @@ config ATA_NONSTANDARD bool default n +config ATA_ACPI + bool + depends on ACPI && PCI + default y + help + This option adds support for ATA-related ACPI objects. + These ACPI objects add the ability to retrieve taskfiles + from the ACPI BIOS and write them to the disk controller. + These objects may be related to performance, security, + power management, or other areas. + You can disable this at kernel boot time by using the + option libata.noacpi=1 + config SATA_AHCI tristate "AHCI SATA support" depends on PCI @@ -157,19 +168,6 @@ config SATA_INIC162X help This option enables support for Initio 162x Serial ATA. -config SATA_ACPI - bool - depends on ACPI && PCI - default y - help - This option adds support for SATA-related ACPI objects. - These ACPI objects add the ability to retrieve taskfiles - from the ACPI BIOS and write them to the disk controller. - These objects may be related to performance, security, - power management, or other areas. - You can disable this at kernel boot time by using the - option libata.noacpi=1 - config PATA_ALI tristate "ALi PATA support (Experimental)" depends on PCI && EXPERIMENTAL @@ -585,6 +583,4 @@ config PATA_SCC If unsure, say N. -endif -endmenu - +endif # ATA diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 6f42a0e2812d..8149c68ac2c7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -69,4 +69,4 @@ obj-$(CONFIG_ATA_GENERIC) += ata_generic.o obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o -libata-$(CONFIG_SATA_ACPI) += libata-acpi.o +libata-$(CONFIG_ATA_ACPI) += libata-acpi.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index d9617892fc23..1ae443d7ab92 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -250,10 +250,6 @@ static struct scsi_host_template ahci_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations ahci_ops = { @@ -400,6 +396,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ + { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 */ /* VIA */ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 92a491ddd030..c3d753296bc6 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -54,7 +54,7 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_ready(dev)) { + if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->dma_mode = XFER_MW_DMA_0; @@ -90,10 +90,6 @@ static struct scsi_host_template generic_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations generic_port_ops = { @@ -145,7 +141,7 @@ static int all_generic_ide; /* Set to claim all devices */ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { u16 command; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &generic_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -153,7 +149,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id .udma_mask = 0x3f, .port_ops = &generic_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; /* Don't use the generic entry unless instructed to do so */ if (id->driver_data == 1 && all_generic_ide == 0) @@ -179,7 +175,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id if (dev->vendor == PCI_VENDOR_ID_AL) ata_pci_clear_simplex(dev); - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static struct pci_device_id ata_generic[] = { diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 4a795fdb6a02..13b6b1df2ac4 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -275,10 +275,6 @@ static struct scsi_host_template piix_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations piix_pata_ops = { @@ -1034,7 +1030,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; struct device *dev = &pdev->dev; struct ata_port_info port_info[2]; - struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; + const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; struct piix_host_priv *hpriv; unsigned long port_flags; @@ -1093,7 +1089,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) port_info[1].mwdma_mask = 0; port_info[1].udma_mask = 0; } - return ata_pci_init_one(pdev, ppinfo, 2); + return ata_pci_init_one(pdev, ppi); } static int __init piix_init(void) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index cb3eab6e379d..ed4138e24b0c 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -270,8 +270,7 @@ out: /** * do_drive_get_GTF - get the drive bootup default taskfile settings - * @ap: the ata_port for the drive - * @ix: target ata_device (drive) index + * @dev: target ATA device * @gtf_length: number of bytes of _GTF data returned at @gtf_address * @gtf_address: buffer containing _GTF taskfile arrays * @@ -286,20 +285,19 @@ out: * The returned @gtf_length and @gtf_address are only valid if the * function return value is 0. */ -static int do_drive_get_GTF(struct ata_port *ap, int ix, - unsigned int *gtf_length, unsigned long *gtf_address, - unsigned long *obj_loc) +static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length, + unsigned long *gtf_address, unsigned long *obj_loc) { - acpi_status status; - acpi_handle dev_handle = NULL; - acpi_handle chan_handle, drive_handle; - acpi_integer pcidevfn = 0; - u32 dev_adr; - struct acpi_buffer output; - union acpi_object *out_obj; - struct device *dev = ap->host->dev; - struct ata_device *atadev = &ap->device[ix]; - int err = -ENODEV; + struct ata_port *ap = dev->ap; + acpi_status status; + acpi_handle dev_handle = NULL; + acpi_handle chan_handle, drive_handle; + acpi_integer pcidevfn = 0; + u32 dev_adr; + struct acpi_buffer output; + union acpi_object *out_obj; + struct device *gdev = ap->host->dev; + int err = -ENODEV; *gtf_length = 0; *gtf_address = 0UL; @@ -309,14 +307,14 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, return 0; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n", + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n", __FUNCTION__, ap->port_no); - if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) { + if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED)) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: ERR: " + ata_dev_printk(dev, KERN_DEBUG, "%s: ERR: " "ata_dev_present: %d, PORT_DISABLED: %lu\n", - __FUNCTION__, ata_dev_enabled(atadev), + __FUNCTION__, ata_dev_enabled(dev), ap->flags & ATA_FLAG_DISABLED); goto out; } @@ -324,19 +322,19 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, /* Don't continue if device has no _ADR method. * _GTF is intended for known motherboard devices. */ if (!(ap->cbl == ATA_CBL_SATA)) { - err = pata_get_dev_handle(dev, &dev_handle, &pcidevfn); + err = pata_get_dev_handle(gdev, &dev_handle, &pcidevfn); if (err < 0) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: pata_get_dev_handle failed (%d)\n", __FUNCTION__, err); goto out; } } else { - err = sata_get_dev_handle(dev, &dev_handle, &pcidevfn); + err = sata_get_dev_handle(gdev, &dev_handle, &pcidevfn); if (err < 0) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: sata_get_dev_handle failed (%d\n", __FUNCTION__, err); goto out; @@ -344,7 +342,7 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, } /* Get this drive's _ADR info. if not already known. */ - if (!atadev->obj_handle) { + if (!dev->obj_handle) { if (!(ap->cbl == ATA_CBL_SATA)) { /* get child objects of dev_handle == channel objects, * + _their_ children == drive objects */ @@ -352,7 +350,7 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, chan_handle = acpi_get_child(dev_handle, ap->port_no); if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: chan adr=%d: chan_handle=0x%p\n", __FUNCTION__, ap->port_no, chan_handle); @@ -361,26 +359,26 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, goto out; } /* TBD: could also check ACPI object VALID bits */ - drive_handle = acpi_get_child(chan_handle, ix); + drive_handle = acpi_get_child(chan_handle, dev->devno); if (!drive_handle) { err = -ENODEV; goto out; } - dev_adr = ix; - atadev->obj_handle = drive_handle; + dev_adr = dev->devno; + dev->obj_handle = drive_handle; } else { /* for SATA mode */ dev_adr = SATA_ADR_RSVD; - err = get_sata_adr(dev, dev_handle, pcidevfn, 0, - ap, atadev, &dev_adr); + err = get_sata_adr(gdev, dev_handle, pcidevfn, 0, + ap, dev, &dev_adr); } if (err < 0 || dev_adr == SATA_ADR_RSVD || - !atadev->obj_handle) { + !dev->obj_handle) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: get_sata/pata_adr failed: " "err=%d, dev_adr=%u, obj_handle=0x%p\n", __FUNCTION__, err, dev_adr, - atadev->obj_handle); + dev->obj_handle); goto out; } } @@ -391,11 +389,11 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, /* _GTF has no input parameters */ err = -EIO; - status = acpi_evaluate_object(atadev->obj_handle, "_GTF", + status = acpi_evaluate_object(dev->obj_handle, "_GTF", NULL, &output); if (ACPI_FAILURE(status)) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF error: status = 0x%x\n", __FUNCTION__, status); goto out; @@ -403,7 +401,7 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, if (!output.length || !output.pointer) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: " + ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: " "length or ptr is NULL (0x%llx, 0x%p)\n", __FUNCTION__, (unsigned long long)output.length, @@ -416,7 +414,7 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, if (out_obj->type != ACPI_TYPE_BUFFER) { kfree(output.pointer); if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: " + ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: " "error: expected object type of " " ACPI_TYPE_BUFFER, got 0x%x\n", __FUNCTION__, out_obj->type); @@ -427,7 +425,7 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, if (!out_obj->buffer.length || !out_obj->buffer.pointer || out_obj->buffer.length % REGS_PER_GTF) { if (ata_msg_drv(ap)) - ata_dev_printk(atadev, KERN_ERR, + ata_dev_printk(dev, KERN_ERR, "%s: unexpected GTF length (%d) or addr (0x%p)\n", __FUNCTION__, out_obj->buffer.length, out_obj->buffer.pointer); @@ -439,7 +437,7 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix, *gtf_address = (unsigned long)out_obj->buffer.pointer; *obj_loc = (unsigned long)out_obj; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: returning " + ata_dev_printk(dev, KERN_DEBUG, "%s: returning " "gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n", __FUNCTION__, *gtf_length, *gtf_address, *obj_loc); err = 0; @@ -449,7 +447,7 @@ out: /** * taskfile_load_raw - send taskfile registers to host controller - * @ap: Port to which output is sent + * @dev: target ATA device * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) * * Outputs ATA taskfile to standard ATA host controller using MMIO @@ -466,15 +464,15 @@ out: * LOCKING: TBD: * Inherited from caller. */ -static void taskfile_load_raw(struct ata_port *ap, - struct ata_device *atadev, - const struct taskfile_array *gtf) +static void taskfile_load_raw(struct ata_device *dev, + const struct taskfile_array *gtf) { + struct ata_port *ap = dev->ap; struct ata_taskfile tf; unsigned int err; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: " + ata_dev_printk(dev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: " "%02x %02x %02x %02x %02x %02x %02x\n", __FUNCTION__, gtf->tfa[0], gtf->tfa[1], gtf->tfa[2], @@ -485,7 +483,7 @@ static void taskfile_load_raw(struct ata_port *ap, && (gtf->tfa[6] == 0)) return; - ata_tf_init(atadev, &tf); + ata_tf_init(dev, &tf); /* convert gtf to tf */ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */ @@ -498,17 +496,16 @@ static void taskfile_load_raw(struct ata_port *ap, tf.device = gtf->tfa[5]; /* 0x1f6 */ tf.command = gtf->tfa[6]; /* 0x1f7 */ - err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0); + err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); if (err && ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_ERR, + ata_dev_printk(dev, KERN_ERR, "%s: ata_exec_internal failed: %u\n", __FUNCTION__, err); } /** * do_drive_set_taskfiles - write the drive taskfile settings from _GTF - * @ap: the ata_port for the drive - * @atadev: target ata_device + * @dev: target ATA device * @gtf_length: total number of bytes of _GTF taskfiles * @gtf_address: location of _GTF taskfile arrays * @@ -517,30 +514,31 @@ static void taskfile_load_raw(struct ata_port *ap, * Write {gtf_address, length gtf_length} in groups of * REGS_PER_GTF bytes. */ -static int do_drive_set_taskfiles(struct ata_port *ap, - struct ata_device *atadev, unsigned int gtf_length, - unsigned long gtf_address) +static int do_drive_set_taskfiles(struct ata_device *dev, + unsigned int gtf_length, + unsigned long gtf_address) { - int err = -ENODEV; - int gtf_count = gtf_length / REGS_PER_GTF; - int ix; + struct ata_port *ap = dev->ap; + int err = -ENODEV; + int gtf_count = gtf_length / REGS_PER_GTF; + int ix; struct taskfile_array *gtf; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n", + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n", __FUNCTION__, ap->port_no); if (libata_noacpi || !(ap->cbl == ATA_CBL_SATA)) return 0; - if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) + if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED)) goto out; if (!gtf_count) /* shouldn't be here */ goto out; if (gtf_length % REGS_PER_GTF) { if (ata_msg_drv(ap)) - ata_dev_printk(atadev, KERN_ERR, + ata_dev_printk(dev, KERN_ERR, "%s: unexpected GTF length (%d)\n", __FUNCTION__, gtf_length); goto out; @@ -551,7 +549,7 @@ static int do_drive_set_taskfiles(struct ata_port *ap, (gtf_address + ix * REGS_PER_GTF); /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */ - taskfile_load_raw(ap, atadev, gtf); + taskfile_load_raw(dev, gtf); } err = 0; @@ -567,11 +565,11 @@ out: */ int ata_acpi_exec_tfs(struct ata_port *ap) { - int ix; - int ret =0; - unsigned int gtf_length; - unsigned long gtf_address; - unsigned long obj_loc; + int ix; + int ret = 0; + unsigned int gtf_length; + unsigned long gtf_address; + unsigned long obj_loc; if (libata_noacpi) return 0; @@ -584,11 +582,13 @@ int ata_acpi_exec_tfs(struct ata_port *ap) return 0; for (ix = 0; ix < ATA_MAX_DEVICES; ix++) { - if (!ata_dev_enabled(&ap->device[ix])) + struct ata_device *dev = &ap->device[ix]; + + if (!ata_dev_enabled(dev)) continue; - ret = do_drive_get_GTF(ap, ix, - >f_length, >f_address, &obj_loc); + ret = do_drive_get_GTF(dev, >f_length, >f_address, + &obj_loc); if (ret < 0) { if (ata_msg_probe(ap)) ata_port_printk(ap, KERN_DEBUG, @@ -597,8 +597,7 @@ int ata_acpi_exec_tfs(struct ata_port *ap) break; } - ret = do_drive_set_taskfiles(ap, &ap->device[ix], - gtf_length, gtf_address); + ret = do_drive_set_taskfiles(dev, gtf_length, gtf_address); kfree((void *)obj_loc); if (ret < 0) { if (ata_msg_probe(ap)) @@ -614,8 +613,7 @@ int ata_acpi_exec_tfs(struct ata_port *ap) /** * ata_acpi_push_id - send Identify data to drive - * @ap: the ata_port for the drive - * @ix: drive index + * @dev: target ATA device * * _SDD ACPI object: for SATA mode only * Must be after Identify (Packet) Device -- uses its data @@ -623,57 +621,57 @@ int ata_acpi_exec_tfs(struct ata_port *ap) * method and if it fails for whatever reason, we should still * just keep going. */ -int ata_acpi_push_id(struct ata_port *ap, unsigned int ix) +int ata_acpi_push_id(struct ata_device *dev) { - acpi_handle handle; - acpi_integer pcidevfn; - int err; - struct device *dev = ap->host->dev; - struct ata_device *atadev = &ap->device[ix]; - u32 dev_adr; - acpi_status status; - struct acpi_object_list input; - union acpi_object in_params[1]; + struct ata_port *ap = dev->ap; + acpi_handle handle; + acpi_integer pcidevfn; + int err; + struct device *gdev = ap->host->dev; + u32 dev_adr; + acpi_status status; + struct acpi_object_list input; + union acpi_object in_params[1]; if (libata_noacpi) return 0; if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, "%s: ix = %d, port#: %d\n", - __FUNCTION__, ix, ap->port_no); + ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n", + __FUNCTION__, dev->devno, ap->port_no); /* Don't continue if not a SATA device. */ if (!(ap->cbl == ATA_CBL_SATA)) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: Not a SATA device\n", __FUNCTION__); goto out; } /* Don't continue if device has no _ADR method. * _SDD is intended for known motherboard devices. */ - err = sata_get_dev_handle(dev, &handle, &pcidevfn); + err = sata_get_dev_handle(gdev, &handle, &pcidevfn); if (err < 0) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: sata_get_dev_handle failed (%d\n", __FUNCTION__, err); goto out; } /* Get this drive's _ADR info, if not already known */ - if (!atadev->obj_handle) { + if (!dev->obj_handle) { dev_adr = SATA_ADR_RSVD; - err = get_sata_adr(dev, handle, pcidevfn, ix, ap, atadev, + err = get_sata_adr(gdev, handle, pcidevfn, dev->devno, ap, dev, &dev_adr); if (err < 0 || dev_adr == SATA_ADR_RSVD || - !atadev->obj_handle) { + !dev->obj_handle) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s: get_sata_adr failed: " "err=%d, dev_adr=%u, obj_handle=0x%p\n", __FUNCTION__, err, dev_adr, - atadev->obj_handle); + dev->obj_handle); goto out; } } @@ -683,19 +681,19 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix) input.count = 1; input.pointer = in_params; in_params[0].type = ACPI_TYPE_BUFFER; - in_params[0].buffer.length = sizeof(atadev->id[0]) * ATA_ID_WORDS; - in_params[0].buffer.pointer = (u8 *)atadev->id; + in_params[0].buffer.length = sizeof(dev->id[0]) * ATA_ID_WORDS; + in_params[0].buffer.pointer = (u8 *)dev->id; /* Output buffer: _SDD has no output */ /* It's OK for _SDD to be missing too. */ - swap_buf_le16(atadev->id, ATA_ID_WORDS); - status = acpi_evaluate_object(atadev->obj_handle, "_SDD", &input, NULL); - swap_buf_le16(atadev->id, ATA_ID_WORDS); + swap_buf_le16(dev->id, ATA_ID_WORDS); + status = acpi_evaluate_object(dev->obj_handle, "_SDD", &input, NULL); + swap_buf_le16(dev->id, ATA_ID_WORDS); err = ACPI_FAILURE(status) ? -EIO : 0; if (err < 0) { if (ata_msg_probe(ap)) - ata_dev_printk(atadev, KERN_DEBUG, + ata_dev_printk(dev, KERN_DEBUG, "%s _SDD error: status = 0x%x\n", __FUNCTION__, status); } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4595d1f8cf60..4166407eb47c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -101,6 +101,12 @@ int libata_noacpi = 1; module_param_named(noacpi, libata_noacpi, int, 0444); MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set"); +int ata_spindown_compat = 1; +module_param_named(spindown_compat, ata_spindown_compat, int, 0644); +MODULE_PARM_DESC(spindown_compat, "Enable backward compatible spindown " + "behavior. Will be removed. More info can be found in " + "Documentation/feature-removal-schedule.txt\n"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -1654,7 +1660,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, struct ata_taskfile tf; unsigned int err_mask = 0; const char *reason; - int tried_spinup = 0; + int may_fallback = 1, tried_spinup = 0; int rc; if (ata_msg_ctl(ap)) @@ -1698,11 +1704,31 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, return -ENOENT; } + /* Device or controller might have reported the wrong + * device class. Give a shot at the other IDENTIFY if + * the current one is aborted by the device. + */ + if (may_fallback && + (err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { + may_fallback = 0; + + if (class == ATA_DEV_ATA) + class = ATA_DEV_ATAPI; + else + class = ATA_DEV_ATA; + goto retry; + } + rc = -EIO; reason = "I/O error"; goto err_out; } + /* Falling back doesn't make sense if ID data was read + * successfully at least once. + */ + may_fallback = 0; + swap_buf_le16(id, ATA_ID_WORDS); /* sanity check */ @@ -1843,7 +1869,7 @@ int ata_dev_configure(struct ata_device *dev) ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__); /* set _SDD */ - rc = ata_acpi_push_id(ap, dev->devno); + rc = ata_acpi_push_id(dev); if (rc) { ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n", rc); @@ -2860,7 +2886,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) dev = &ap->device[i]; /* don't update suspended devices' xfer mode */ - if (!ata_dev_ready(dev)) + if (!ata_dev_enabled(dev)) continue; rc = ata_dev_set_mode(dev); @@ -5845,37 +5871,11 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, */ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) { - int i, j, rc; + int rc; rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); - if (rc) - goto fail; - - /* EH is quiescent now. Fail if we have any ready device. - * This happens if hotplug occurs between completion of device - * suspension and here. - */ - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - - for (j = 0; j < ATA_MAX_DEVICES; j++) { - struct ata_device *dev = &ap->device[j]; - - if (ata_dev_ready(dev)) { - ata_port_printk(ap, KERN_WARNING, - "suspend failed, device %d " - "still active\n", dev->devno); - rc = -EBUSY; - goto fail; - } - } - } - - host->dev->power.power_state = mesg; - return 0; - - fail: - ata_host_resume(host); + if (rc == 0) + host->dev->power.power_state = mesg; return rc; } @@ -5984,6 +5984,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) if (!ap) return NULL; + ap->pflags |= ATA_PFLAG_INITIALIZING; ap->lock = &host->lock; ap->flags = ATA_FLAG_DISABLED; ap->print_id = -1; @@ -6352,6 +6353,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) ehi->action |= ATA_EH_SOFTRESET; ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + ap->pflags &= ~ATA_PFLAG_INITIALIZING; ap->pflags |= ATA_PFLAG_LOADING; ata_port_schedule_eh(ap); @@ -6876,6 +6878,7 @@ EXPORT_SYMBOL_GPL(ata_timing_merge); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_init_native_host); +EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); @@ -6889,11 +6892,6 @@ EXPORT_SYMBOL_GPL(ata_pci_default_filter); EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ -#ifdef CONFIG_PM -EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); -EXPORT_SYMBOL_GPL(ata_scsi_device_resume); -#endif /* CONFIG_PM */ - EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_port_abort); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8256655ce7d9..5309c312f517 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -77,29 +77,12 @@ static void ata_eh_finish(struct ata_port *ap); #ifdef CONFIG_PM static void ata_eh_handle_port_suspend(struct ata_port *ap); static void ata_eh_handle_port_resume(struct ata_port *ap); -static int ata_eh_suspend(struct ata_port *ap, - struct ata_device **r_failed_dev); -static void ata_eh_prep_resume(struct ata_port *ap); -static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev); #else /* CONFIG_PM */ static void ata_eh_handle_port_suspend(struct ata_port *ap) { } static void ata_eh_handle_port_resume(struct ata_port *ap) { } - -static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - return 0; -} - -static void ata_eh_prep_resume(struct ata_port *ap) -{ } - -static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - return 0; -} #endif /* CONFIG_PM */ static void ata_ering_record(struct ata_ering *ering, int is_io, @@ -568,6 +551,9 @@ void ata_port_schedule_eh(struct ata_port *ap) { WARN_ON(!ap->ops->error_handler); + if (ap->pflags & ATA_PFLAG_INITIALIZING) + return; + ap->pflags |= ATA_PFLAG_EH_PENDING; scsi_schedule_eh(ap->scsi_host); @@ -1791,7 +1777,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, if (ehc->i.flags & ATA_EHI_DID_RESET) readid_flags |= ATA_READID_POSTRESET; - if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { + if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) { if (ata_port_offline(ap)) { rc = -EIO; goto err; @@ -1872,166 +1858,6 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, return rc; } -#ifdef CONFIG_PM -/** - * ata_eh_suspend - handle suspend EH action - * @ap: target host port - * @r_failed_dev: result parameter to indicate failing device - * - * Handle suspend EH action. Disk devices are spinned down and - * other types of devices are just marked suspended. Once - * suspended, no EH action to the device is allowed until it is - * resumed. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned long flags; - unsigned int action, err_mask; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND)) - continue; - - WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED); - - ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND); - - if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { - /* flush cache */ - rc = ata_flush_cache(dev); - if (rc) - break; - - /* spin down */ - err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to " - "spin down (err_mask=0x%x)\n", - err_mask); - rc = -EIO; - break; - } - } - - spin_lock_irqsave(ap->lock, flags); - dev->flags |= ATA_DFLAG_SUSPENDED; - spin_unlock_irqrestore(ap->lock, flags); - - ata_eh_done(ap, dev, ATA_EH_SUSPEND); - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return rc; -} - -/** - * ata_eh_prep_resume - prep for resume EH action - * @ap: target host port - * - * Clear SUSPENDED in preparation for scheduled resume actions. - * This allows other parts of EH to access the devices being - * resumed. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_prep_resume(struct ata_port *ap) -{ - struct ata_device *dev; - unsigned long flags; - int i; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) - continue; - - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_SUSPENDED; - spin_unlock_irqrestore(ap->lock, flags); - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_eh_resume - handle resume EH action - * @ap: target host port - * @r_failed_dev: result parameter to indicate failing device - * - * Handle resume EH action. Target devices are already reset and - * revalidated. Spinning up is the only operation left. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action, err_mask; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) - continue; - - ata_eh_about_to_do(ap, dev, ATA_EH_RESUME); - - if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { - err_mask = ata_do_simple_cmd(dev, - ATA_CMD_IDLEIMMEDIATE); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to " - "spin up (err_mask=0x%x)\n", - err_mask); - rc = -EIO; - break; - } - } - - ata_eh_done(ap, dev, ATA_EH_RESUME); - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return 0; -} -#endif /* CONFIG_PM */ - static int ata_port_nr_enabled(struct ata_port *ap) { int i, cnt = 0; @@ -2057,17 +1883,6 @@ static int ata_eh_skip_recovery(struct ata_port *ap) struct ata_eh_context *ehc = &ap->eh_context; int i; - /* skip if all possible devices are suspended */ - for (i = 0; i < ata_port_max_devices(ap); i++) { - struct ata_device *dev = &ap->device[i]; - - if (!(dev->flags & ATA_DFLAG_SUSPENDED)) - break; - } - - if (i == ata_port_max_devices(ap)) - return 1; - /* thaw frozen port, resume link and recover failed devices */ if ((ap->pflags & ATA_PFLAG_FROZEN) || (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap)) @@ -2147,9 +1962,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (ap->pflags & ATA_PFLAG_UNLOADING) goto out; - /* prep for resume */ - ata_eh_prep_resume(ap); - /* skip EH if possible. */ if (ata_eh_skip_recovery(ap)) ehc->i.action = 0; @@ -2177,11 +1989,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (rc) goto dev_fail; - /* resume devices */ - rc = ata_eh_resume(ap, &dev); - if (rc) - goto dev_fail; - /* configure transfer mode if necessary */ if (ehc->i.flags & ATA_EHI_SETMODE) { rc = ata_set_mode(ap, &dev); @@ -2190,25 +1997,16 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ehc->i.flags &= ~ATA_EHI_SETMODE; } - /* suspend devices */ - rc = ata_eh_suspend(ap, &dev); - if (rc) - goto dev_fail; - goto out; dev_fail: ehc->tries[dev->devno]--; switch (rc) { - case -EINVAL: - /* eeek, something went very wrong, give up */ - ehc->tries[dev->devno] = 0; - break; - case -ENODEV: /* device missing or wrong IDENTIFY data, schedule probing */ ehc->i.probe_mask |= (1 << dev->devno); + case -EINVAL: /* give it just one more chance */ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); case -EIO: @@ -2390,22 +2188,13 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap) * * Resume @ap. * - * This function also waits upto one second until all devices - * hanging off this port requests resume EH action. This is to - * prevent invoking EH and thus reset multiple times on resume. - * - * On DPM resume, where some of devices might not be resumed - * together, this may delay port resume upto one second, but such - * DPM resumes are rare and 1 sec delay isn't too bad. - * * LOCKING: * Kernel thread context (may sleep). */ static void ata_eh_handle_port_resume(struct ata_port *ap) { - unsigned long timeout; unsigned long flags; - int i, rc = 0; + int rc = 0; /* are we resuming? */ spin_lock_irqsave(ap->lock, flags); @@ -2416,31 +2205,12 @@ static void ata_eh_handle_port_resume(struct ata_port *ap) } spin_unlock_irqrestore(ap->lock, flags); - /* spurious? */ - if (!(ap->pflags & ATA_PFLAG_SUSPENDED)) - goto done; + WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); if (ap->ops->port_resume) rc = ap->ops->port_resume(ap); - /* give devices time to request EH */ - timeout = jiffies + HZ; /* 1s max */ - while (1) { - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - unsigned int action = ata_eh_dev_action(dev); - - if ((dev->flags & ATA_DFLAG_SUSPENDED) && - !(action & ATA_EH_RESUME)) - break; - } - - if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout)) - break; - msleep(10); - } - - done: + /* report result */ spin_lock_irqsave(ap->lock, flags); ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED); if (ap->pm_result) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 9afba2ba489e..dd81fa78cdcf 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -510,133 +510,6 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf) } } -#ifdef CONFIG_PM -/** - * ata_scsi_device_suspend - suspend ATA device associated with sdev - * @sdev: the SCSI device to suspend - * @mesg: target power management message - * - * Request suspend EH action on the ATA device associated with - * @sdev and wait for the operation to complete. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = ata_scsi_find_dev(ap, sdev); - unsigned long flags; - unsigned int action; - int rc = 0; - - if (!dev) - goto out; - - spin_lock_irqsave(ap->lock, flags); - - /* wait for the previous resume to complete */ - while (dev->flags & ATA_DFLAG_SUSPENDED) { - spin_unlock_irqrestore(ap->lock, flags); - ata_port_wait_eh(ap); - spin_lock_irqsave(ap->lock, flags); - } - - /* if @sdev is already detached, nothing to do */ - if (sdev->sdev_state == SDEV_OFFLINE || - sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) - goto out_unlock; - - /* request suspend */ - action = ATA_EH_SUSPEND; - if (mesg.event != PM_EVENT_SUSPEND) - action |= ATA_EH_PM_FREEZE; - ap->eh_info.dev_action[dev->devno] |= action; - ap->eh_info.flags |= ATA_EHI_QUIET; - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait for EH to do the job */ - ata_port_wait_eh(ap); - - spin_lock_irqsave(ap->lock, flags); - - /* If @sdev is still attached but the associated ATA device - * isn't suspended, the operation failed. - */ - if (sdev->sdev_state != SDEV_OFFLINE && - sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL && - !(dev->flags & ATA_DFLAG_SUSPENDED)) - rc = -EIO; - - out_unlock: - spin_unlock_irqrestore(ap->lock, flags); - out: - if (rc == 0) - sdev->sdev_gendev.power.power_state = mesg; - return rc; -} - -/** - * ata_scsi_device_resume - resume ATA device associated with sdev - * @sdev: the SCSI device to resume - * - * Request resume EH action on the ATA device associated with - * @sdev and return immediately. This enables parallel - * wakeup/spinup of devices. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0. - */ -int ata_scsi_device_resume(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = ata_scsi_find_dev(ap, sdev); - struct ata_eh_info *ehi = &ap->eh_info; - unsigned long flags; - unsigned int action; - - if (!dev) - goto out; - - spin_lock_irqsave(ap->lock, flags); - - /* if @sdev is already detached, nothing to do */ - if (sdev->sdev_state == SDEV_OFFLINE || - sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) - goto out_unlock; - - /* request resume */ - action = ATA_EH_RESUME; - if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND) - __ata_ehi_hotplugged(ehi); - else - action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET; - ehi->dev_action[dev->devno] |= action; - - /* We don't want autopsy and verbose EH messages. Disable - * those if we're the only device on this link. - */ - if (ata_port_max_devices(ap) == 1) - ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; - - ata_port_schedule_eh(ap); - - out_unlock: - spin_unlock_irqrestore(ap->lock, flags); - out: - sdev->sdev_gendev.power.power_state = PMSG_ON; - return 0; -} -#endif /* CONFIG_PM */ - /** * ata_to_sense_error - convert ATA error to SCSI error * @id: ATA device number @@ -929,6 +802,8 @@ int ata_scsi_slave_config(struct scsi_device *sdev) blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); + sdev->manage_start_stop = 1; + if (dev) ata_scsi_dev_config(sdev, dev); @@ -1069,9 +944,35 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) } tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ - } else + } else { + /* XXX: This is for backward compatibility, will be + * removed. Read Documentation/feature-removal-schedule.txt + * for more info. + */ + if (ata_spindown_compat && + (system_state == SYSTEM_HALT || + system_state == SYSTEM_POWER_OFF)) { + static int warned = 0; + + if (!warned) { + spin_unlock_irq(qc->ap->lock); + ata_dev_printk(qc->dev, KERN_WARNING, + "DISK MIGHT NOT BE SPUN DOWN PROPERLY. " + "UPDATE SHUTDOWN UTILITY\n"); + ata_dev_printk(qc->dev, KERN_WARNING, + "For more info, visit " + "http://linux-ata.org/shutdown.html\n"); + warned = 1; + ssleep(5); + spin_lock_irq(qc->ap->lock); + } + scmd->result = SAM_STAT_GOOD; + return 1; + } + /* Issue ATA STANDBY IMMEDIATE command */ tf->command = ATA_CMD_STANDBYNOW1; + } /* * Standby and Idle condition timers could be implemented but that diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d211db6b35a2..e35d13466c69 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -544,7 +544,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port) * RETURNS: * 0 on success, -errno otherwise. */ -static int ata_pci_init_bmdma(struct ata_host *host) +int ata_pci_init_bmdma(struct ata_host *host) { struct device *gdev = host->dev; struct pci_dev *pdev = to_pci_dev(gdev); @@ -566,7 +566,7 @@ static int ata_pci_init_bmdma(struct ata_host *host) } host->iomap = pcim_iomap_table(pdev); - for (i = 0; i < host->n_ports; i++) { + for (i = 0; i < 2; i++) { struct ata_port *ap = host->ports[i]; void __iomem *bmdma = host->iomap[4] + 8 * i; @@ -585,54 +585,52 @@ static int ata_pci_init_bmdma(struct ata_host *host) /** * ata_pci_init_native_host - acquire native ATA resources and init host * @host: target ATA host - * @port_mask: ports to consider * - * Acquire native PCI ATA resources for @host and initialize - * @host accordoingly. + * Acquire native PCI ATA resources for @host and initialize the + * first two ports of @host accordingly. Ports marked dummy are + * skipped and allocation failure makes the port dummy. * * LOCKING: * Inherited from calling layer (may sleep). * * RETURNS: - * 0 on success, -errno otherwise. + * 0 if at least one port is initialized, -ENODEV if no port is + * available. */ -int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) +int ata_pci_init_native_host(struct ata_host *host) { struct device *gdev = host->dev; struct pci_dev *pdev = to_pci_dev(gdev); + unsigned int mask = 0; int i, rc; - /* Discard disabled ports. Some controllers show their unused - * channels this way. Disabled ports are made dummy. - */ - for (i = 0; i < 2; i++) { - if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) { - host->ports[i]->ops = &ata_dummy_port_ops; - port_mask &= ~(1 << i); - } - } - - if (!port_mask) { - dev_printk(KERN_ERR, gdev, "no available port\n"); - return -ENODEV; - } - /* request, iomap BARs and init port addresses accordingly */ for (i = 0; i < 2; i++) { struct ata_port *ap = host->ports[i]; int base = i * 2; void __iomem * const *iomap; - if (!(port_mask & (1 << i))) + if (ata_port_is_dummy(ap)) + continue; + + /* Discard disabled ports. Some controllers show + * their unused channels this way. Disabled ports are + * made dummy. + */ + if (!ata_resources_present(pdev, i)) { + ap->ops = &ata_dummy_port_ops; continue; + } rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME); if (rc) { - dev_printk(KERN_ERR, gdev, "failed to request/iomap " - "BARs for port %d (errno=%d)\n", i, rc); + dev_printk(KERN_WARNING, gdev, + "failed to request/iomap BARs for port %d " + "(errno=%d)\n", i, rc); if (rc == -EBUSY) pcim_pin_device(pdev); - return rc; + ap->ops = &ata_dummy_port_ops; + continue; } host->iomap = iomap = pcim_iomap_table(pdev); @@ -641,6 +639,13 @@ int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) ap->ioaddr.ctl_addr = (void __iomem *) ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); ata_std_ports(&ap->ioaddr); + + mask |= 1 << i; + } + + if (!mask) { + dev_printk(KERN_ERR, gdev, "no available native port\n"); + return -ENODEV; } return 0; @@ -649,8 +654,7 @@ int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) /** * ata_pci_prepare_native_host - helper to prepare native PCI ATA host * @pdev: target PCI device - * @ppi: array of port_info - * @n_ports: number of ports to allocate + * @ppi: array of port_info, must be enough for two ports * @r_host: out argument for the initialized ATA host * * Helper to allocate ATA host for @pdev, acquire all native PCI @@ -664,10 +668,9 @@ int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) */ int ata_pci_prepare_native_host(struct pci_dev *pdev, const struct ata_port_info * const * ppi, - int n_ports, struct ata_host **r_host) + struct ata_host **r_host) { struct ata_host *host; - unsigned int port_mask; int rc; if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) @@ -681,11 +684,7 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev, goto err_out; } - port_mask = ATA_PORT_PRIMARY; - if (n_ports > 1) - port_mask |= ATA_PORT_SECONDARY; - - rc = ata_pci_init_native_host(host, port_mask); + rc = ata_pci_init_native_host(host); if (rc) goto err_out; @@ -777,8 +776,11 @@ static int ata_init_legacy_port(struct ata_port *ap, /* iomap cmd and ctl ports */ legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8); legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1); - if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) + if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) { + dev_printk(KERN_WARNING, host->dev, + "failed to map cmd/ctl ports\n"); return -ENOMEM; + } /* init IO addresses */ ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no]; @@ -792,19 +794,20 @@ static int ata_init_legacy_port(struct ata_port *ap, /** * ata_init_legacy_host - acquire legacy ATA resources and init ATA host * @host: target ATA host - * @legacy_mask: out parameter, mask indicating ports is in legacy mode * @was_busy: out parameter, indicates whether any port was busy * - * Acquire legacy ATA resources for ports. + * Acquire legacy ATA resources for the first two ports of @host + * and initialize it accordingly. Ports marked dummy are skipped + * and resource acquistion failure makes the port dummy. * * LOCKING: * Inherited from calling layer (may sleep). * * RETURNS: - * 0 on success, -errno otherwise. + * 0 if at least one port is initialized, -ENODEV if no port is + * available. */ -static int ata_init_legacy_host(struct ata_host *host, - unsigned int *legacy_mask, int *was_busy) +static int ata_init_legacy_host(struct ata_host *host, int *was_busy) { struct device *gdev = host->dev; struct ata_legacy_devres *legacy_dr; @@ -821,22 +824,23 @@ static int ata_init_legacy_host(struct ata_host *host, devres_add(gdev, legacy_dr); for (i = 0; i < 2; i++) { - *legacy_mask &= ~(1 << i); + if (ata_port_is_dummy(host->ports[i])) + continue; + rc = ata_init_legacy_port(host->ports[i], legacy_dr); if (rc == 0) legacy_dr->mask |= 1 << i; - else if (rc == -EBUSY) - (*was_busy)++; - } - - if (!legacy_dr->mask) - return -EBUSY; - - for (i = 0; i < 2; i++) - if (!(legacy_dr->mask & (1 << i))) + else { + if (rc == -EBUSY) + (*was_busy)++; host->ports[i]->ops = &ata_dummy_port_ops; + } + } - *legacy_mask |= legacy_dr->mask; + if (!legacy_dr->mask) { + dev_printk(KERN_ERR, gdev, "no available legacy port\n"); + return -ENODEV; + } devres_remove_group(gdev, NULL); return 0; @@ -875,7 +879,7 @@ static int ata_request_legacy_irqs(struct ata_host *host, legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL); BUG_ON(!legacy_dr); - for (i = 0; i < host->n_ports; i++) { + for (i = 0; i < 2; i++) { unsigned int irq; /* FIXME: ATA_*_IRQ() should take generic device not pci_dev */ @@ -923,8 +927,7 @@ static int ata_request_legacy_irqs(struct ata_host *host, /** * ata_pci_init_one - Initialize/register PCI IDE host controller * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller + * @ppi: array of port_info, must be enough for two ports * * This is a helper function which can be called from a driver's * xxx_init_one() probe function if the hardware uses traditional @@ -944,26 +947,34 @@ static int ata_request_legacy_irqs(struct ata_host *host, * RETURNS: * Zero on success, negative on errno-based value on error. */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) +int ata_pci_init_one(struct pci_dev *pdev, + const struct ata_port_info * const * ppi) { struct device *dev = &pdev->dev; + const struct ata_port_info *pi = NULL; struct ata_host *host = NULL; - const struct ata_port_info *port[2]; u8 mask; - unsigned int legacy_mode = 0; - int rc; + int legacy_mode = 0; + int i, rc; DPRINTK("ENTER\n"); - if (!devres_open_group(dev, NULL, GFP_KERNEL)) - return -ENOMEM; + /* look up the first valid port_info */ + for (i = 0; i < 2 && ppi[i]; i++) { + if (ppi[i]->port_ops != &ata_dummy_port_ops) { + pi = ppi[i]; + break; + } + } - BUG_ON(n_ports < 1 || n_ports > 2); + if (!pi) { + dev_printk(KERN_ERR, &pdev->dev, + "no valid port_info specified\n"); + return -EINVAL; + } - port[0] = port_info[0]; - port[1] = (n_ports > 1) ? port_info[1] : NULL; + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; /* FIXME: Really for ATA it isn't safe because the device may be multi-purpose and we want to leave it alone if it was already @@ -984,7 +995,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); mask = (1 << 2) | (1 << 0); if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); + legacy_mode = 1; #if defined(CONFIG_NO_ATA_LEGACY) /* Some platforms with PCI limits cannot address compat port space. In that case we punt if their firmware has @@ -998,7 +1009,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } /* alloc and init host */ - host = ata_host_alloc_pinfo(dev, port, n_ports); + host = ata_host_alloc_pinfo(dev, ppi, 2); if (!host) { dev_printk(KERN_ERR, &pdev->dev, "failed to allocate ATA host\n"); @@ -1007,19 +1018,13 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } if (!legacy_mode) { - unsigned int port_mask; - - port_mask = ATA_PORT_PRIMARY; - if (n_ports > 1) - port_mask |= ATA_PORT_SECONDARY; - - rc = ata_pci_init_native_host(host, port_mask); + rc = ata_pci_init_native_host(host); if (rc) goto err_out; } else { int was_busy = 0; - rc = ata_init_legacy_host(host, &legacy_mode, &was_busy); + rc = ata_init_legacy_host(host, &was_busy); if (was_busy) pcim_pin_device(pdev); if (rc) @@ -1040,8 +1045,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; if (!legacy_mode) - rc = devm_request_irq(dev, pdev->irq, - port_info[0]->port_ops->irq_handler, + rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); else { irq_handler_t handler[2] = { host->ops->irq_handler, @@ -1055,7 +1059,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; /* register */ - rc = ata_host_register(host, port_info[0]->sht); + rc = ata_host_register(host, pi->sht); if (rc) goto err_out; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 5f4d40cd3288..8b71b73a199c 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -58,6 +58,7 @@ extern int atapi_enabled; extern int atapi_dmadir; extern int libata_fua; extern int libata_noacpi; +extern int ata_spindown_compat; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, @@ -96,15 +97,15 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct ata_port *ata_port_alloc(struct ata_host *host); /* libata-acpi.c */ -#ifdef CONFIG_SATA_ACPI +#ifdef CONFIG_ATA_ACPI extern int ata_acpi_exec_tfs(struct ata_port *ap); -extern int ata_acpi_push_id(struct ata_port *ap, unsigned int ix); +extern int ata_acpi_push_id(struct ata_device *dev); #else static inline int ata_acpi_exec_tfs(struct ata_port *ap) { return 0; } -static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix) +static inline int ata_acpi_push_id(struct ata_device *dev) { return 0; } diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index d40edebb510a..3c55a5ff74c7 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -291,10 +291,6 @@ static struct scsi_host_template ali_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; /* @@ -522,14 +518,14 @@ static void ali_init_chipset(struct pci_dev *pdev) static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info_early = { + static const struct ata_port_info info_early = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &ali_early_port_ops }; /* Revision 0x20 added DMA */ - static struct ata_port_info info_20 = { + static const struct ata_port_info info_20 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -537,7 +533,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ - static struct ata_port_info info_20_udma = { + static const struct ata_port_info info_20_udma = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -546,7 +542,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_20_port_ops }; /* Revision 0xC2 adds UDMA66 */ - static struct ata_port_info info_c2 = { + static const struct ata_port_info info_c2 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -555,7 +551,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c2_port_ops }; /* Revision 0xC3 is UDMA100 */ - static struct ata_port_info info_c3 = { + static const struct ata_port_info info_c3 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -564,7 +560,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c2_port_ops }; /* Revision 0xC4 is UDMA133 */ - static struct ata_port_info info_c4 = { + static const struct ata_port_info info_c4 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, @@ -573,7 +569,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c2_port_ops }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ - static struct ata_port_info info_c5 = { + static const struct ata_port_info info_c5 = { .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -582,7 +578,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &ali_c5_port_ops }; - static struct ata_port_info *port_info[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; u8 rev, tmp; struct pci_dev *isa_bridge; @@ -594,17 +590,17 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) */ if (rev < 0x20) { - port_info[0] = port_info[1] = &info_early; + ppi[0] = &info_early; } else if (rev < 0xC2) { - port_info[0] = port_info[1] = &info_20; + ppi[0] = &info_20; } else if (rev == 0xC2) { - port_info[0] = port_info[1] = &info_c2; + ppi[0] = &info_c2; } else if (rev == 0xC3) { - port_info[0] = port_info[1] = &info_c3; + ppi[0] = &info_c3; } else if (rev == 0xC4) { - port_info[0] = port_info[1] = &info_c4; + ppi[0] = &info_c4; } else - port_info[0] = port_info[1] = &info_c5; + ppi[0] = &info_c5; ali_init_chipset(pdev); @@ -613,10 +609,10 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Are we paired with a UDMA capable chip */ pci_read_config_byte(isa_bridge, 0x5E, &tmp); if ((tmp & 0x1E) == 0x12) - port_info[0] = port_info[1] = &info_20_udma; + ppi[0] = &info_20_udma; pci_dev_put(isa_bridge); } - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 67c7e87dec04..b439351f1fd3 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -324,10 +324,6 @@ static struct scsi_host_template amd_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations amd33_port_ops = { @@ -542,7 +538,7 @@ static struct ata_port_operations nv133_port_ops = { static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info[10] = { + static const struct ata_port_info info[10] = { { /* 0: AMD 7401 */ .sht = &amd_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -624,7 +620,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &amd100_port_ops } }; - static struct ata_port_info *port_info[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; static int printed_version; int type = id->driver_data; u8 rev; @@ -656,9 +652,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ata_pci_clear_simplex(pdev); /* And fire it up */ - - port_info[0] = port_info[1] = &info[type]; - return ata_pci_init_one(pdev, port_info, 2); + ppi[0] = &info[type]; + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index ef51940c3adb..9861059dd673 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -414,7 +414,7 @@ static const struct ata_port_operations artop6260_ops = { static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) { static int printed_version; - static struct ata_port_info info_6210 = { + static const struct ata_port_info info_6210 = { .sht = &artop_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -422,7 +422,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA2, .port_ops = &artop6210_ops, }; - static struct ata_port_info info_626x = { + static const struct ata_port_info info_626x = { .sht = &artop_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -430,7 +430,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA4, .port_ops = &artop6260_ops, }; - static struct ata_port_info info_626x_fast = { + static const struct ata_port_info info_626x_fast = { .sht = &artop_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -438,32 +438,30 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA5, .port_ops = &artop6260_ops, }; - struct ata_port_info *port_info[2]; - struct ata_port_info *info = NULL; - int ports = 2; + const struct ata_port_info *ppi[] = { NULL, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); if (id->driver_data == 0) { /* 6210 variant */ - info = &info_6210; + ppi[0] = &info_6210; + ppi[1] = &ata_dummy_port_info; /* BIOS may have left us in UDMA, clear it before libata probe */ pci_write_config_byte(pdev, 0x54, 0); /* For the moment (also lacks dsc) */ printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n"); printk(KERN_WARNING "Secondary ATA ports will not be activated.\n"); - ports = 1; } else if (id->driver_data == 1) /* 6260 */ - info = &info_626x; + ppi[0] = &info_626x; else if (id->driver_data == 2) { /* 6260 or 6260 + fast */ unsigned long io = pci_resource_start(pdev, 4); u8 reg; - info = &info_626x; + ppi[0] = &info_626x; if (inb(io) & 0x10) - info = &info_626x_fast; + ppi[0] = &info_626x_fast; /* Mac systems come up with some registers not set as we will need them */ @@ -484,10 +482,9 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) } - BUG_ON(info == NULL); + BUG_ON(ppi[0] == NULL); - port_info[0] = port_info[1] = info; - return ata_pci_init_one(pdev, port_info, ports); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id artop_pci_tbl[] = { diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 21515381b5b3..844914681a2a 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -229,10 +229,6 @@ static struct scsi_host_template atiixp_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations atiixp_port_ops = { @@ -272,7 +268,7 @@ static struct ata_port_operations atiixp_port_ops = { static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &atiixp_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -280,8 +276,8 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x3F, .port_ops = &atiixp_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; - return ata_pci_init_one(dev, port_info, 2); + const struct ata_port_info *ppi[] = { &info, NULL }; + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id atiixp[] = { diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 2105985a8013..ed00fa9d53be 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -181,10 +181,6 @@ static struct scsi_host_template cmd640_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cmd640_port_ops = { @@ -253,17 +249,16 @@ static void cmd640_hardware_init(struct pci_dev *pdev) static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cmd640_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &cmd640_port_ops }; - - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; cmd640_hardware_init(pdev); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static int cmd640_reinit_one(struct pci_dev *pdev) diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 3989cc577fcd..2a79b335cfcc 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -266,10 +266,6 @@ static struct scsi_host_template cmd64x_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cmd64x_port_ops = { @@ -381,7 +377,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u32 class_rev; - static struct ata_port_info cmd_info[6] = { + static const struct ata_port_info cmd_info[6] = { { /* CMD 643 - no UDMA */ .sht = &cmd64x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -428,11 +424,9 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &cmd648_port_ops } }; - static struct ata_port_info *port_info[2], *info; + const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL }; u8 mrdmode; - info = &cmd_info[id->driver_data]; - pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; @@ -442,10 +436,10 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (pdev->device == PCI_DEVICE_ID_CMD_646) { /* Does UDMA work ? */ if (class_rev > 4) - info = &cmd_info[2]; + ppi[0] = &cmd_info[2]; /* Early rev with other problems ? */ else if (class_rev == 1) - info = &cmd_info[3]; + ppi[0] = &cmd_info[3]; } pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); @@ -461,8 +455,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif - port_info[0] = port_info[1] = info; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 79bef0d1fad3..83bcc5b32597 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -155,10 +155,6 @@ static struct scsi_host_template cs5520_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cs5520_port_ops = { diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 29642d5ee189..1b67923d7a4e 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -176,10 +176,6 @@ static struct scsi_host_template cs5530_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cs5530_port_ops = { @@ -339,7 +335,7 @@ fail_put: static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cs5530_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -348,23 +344,23 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &cs5530_port_ops }; /* The docking connector doesn't do UDMA, and it seems not MWDMA */ - static struct ata_port_info info_palmax_secondary = { + static const struct ata_port_info info_palmax_secondary = { .sht = &cs5530_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &cs5530_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; /* Chip initialisation */ if (cs5530_init_chip()) return -ENODEV; if (cs5530_is_palmax()) - port_info[1] = &info_palmax_secondary; + ppi[1] = &info_palmax_secondary; /* Now kick off ATA set up */ - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 22006ae71941..f37d4cd812a1 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -173,10 +173,6 @@ static struct scsi_host_template cs5535_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cs5535_port_ops = { @@ -227,7 +223,7 @@ static struct ata_port_operations cs5535_port_ops = { static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cs5535_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -235,7 +231,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x1f, .port_ops = &cs5535_port_ops }; - struct ata_port_info *ports[1] = { &info }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; u32 timings, dummy; @@ -247,7 +243,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) rdmsr(ATAC_CH0D1_PIO, timings, dummy); if (CS5535_BAD_PIO(timings)) wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); - return ata_pci_init_one(dev, ports, 1); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id cs5535[] = { diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 6ec049c3b1dc..27b9f29c01e3 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -125,10 +125,6 @@ static struct scsi_host_template cy82c693_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cy82c693_port_ops = { @@ -169,14 +165,14 @@ static struct ata_port_operations cy82c693_port_ops = { static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &cy82c693_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &cy82c693_port_ops }; - static struct ata_port_info *port_info[1] = { &info }; + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the moment we don't handle the secondary. FIXME */ @@ -184,7 +180,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i if (PCI_FUNC(pdev->devfn) != 1) return -ENODEV; - return ata_pci_init_one(pdev, port_info, 1); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id cy82c693[] = { diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index d0f52e034906..079248a9b460 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -247,10 +247,6 @@ static struct scsi_host_template efar_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations efar_ops = { @@ -305,7 +301,7 @@ static const struct ata_port_operations efar_ops = { static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &efar_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -313,13 +309,13 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) .udma_mask = 0x0f, /* UDMA 66 */ .port_ops = &efar_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id efar_pci_tbl[] = { diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index e64e05e5c7fe..c6c8a8bb06d0 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -331,10 +331,6 @@ static struct scsi_host_template hpt36x_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; /* @@ -421,7 +417,7 @@ static void hpt36x_init_chipset(struct pci_dev *dev) static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info_hpt366 = { + static const struct ata_port_info info_hpt366 = { .sht = &hpt36x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -429,7 +425,8 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x1f, .port_ops = &hpt366_port_ops }; - struct ata_port_info *port_info[2] = {&info_hpt366, &info_hpt366}; + struct ata_port_info info = info_hpt366; + const struct ata_port_info *ppi[] = { &info, NULL }; u32 class_rev; u32 reg1; @@ -450,17 +447,17 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* info_hpt366 is safe against re-entry so we can scribble on it */ switch((reg1 & 0x700) >> 8) { case 5: - info_hpt366.private_data = &hpt366_40; + info.private_data = &hpt366_40; break; case 9: - info_hpt366.private_data = &hpt366_25; + info.private_data = &hpt366_25; break; default: - info_hpt366.private_data = &hpt366_33; + info.private_data = &hpt366_33; break; } /* Now kick off ATA set up */ - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 1614e8c822a4..5a0a410654e2 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -887,7 +887,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev) static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT370 - UDMA100 */ - static struct ata_port_info info_hpt370 = { + static const struct ata_port_info info_hpt370 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -896,7 +896,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ - static struct ata_port_info info_hpt370a = { + static const struct ata_port_info info_hpt370a = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -905,7 +905,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370a_port_ops }; /* HPT370 - UDMA100 */ - static struct ata_port_info info_hpt370_33 = { + static const struct ata_port_info info_hpt370_33 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -914,7 +914,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370_port_ops }; /* HPT370A - UDMA100 */ - static struct ata_port_info info_hpt370a_33 = { + static const struct ata_port_info info_hpt370a_33 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -923,7 +923,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt370a_port_ops }; /* HPT371, 372 and friends - UDMA133 */ - static struct ata_port_info info_hpt372 = { + static const struct ata_port_info info_hpt372 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -932,7 +932,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt372_port_ops }; /* HPT371, 372 and friends - UDMA100 at 50MHz clock */ - static struct ata_port_info info_hpt372_50 = { + static const struct ata_port_info info_hpt372_50 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -941,7 +941,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .port_ops = &hpt372_port_ops }; /* HPT374 - UDMA133 */ - static struct ata_port_info info_hpt374 = { + static const struct ata_port_info info_hpt374 = { .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -951,9 +951,10 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; static const int MHz[4] = { 33, 40, 50, 66 }; - - struct ata_port_info *port_info[2]; - struct ata_port_info *port; + const struct ata_port_info *port; + void *private_data = NULL; + struct ata_port_info port_info; + const struct ata_port_info *ppi[] = { &port_info, NULL }; u8 irqmask; u32 class_rev; @@ -1124,13 +1125,13 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } if (clock_slot == 3) - port->private_data = (void *)hpt37x_timings_66; + private_data = (void *)hpt37x_timings_66; else - port->private_data = (void *)hpt37x_timings_50; + private_data = (void *)hpt37x_timings_50; printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]); } else { - port->private_data = (void *)chip_table->clocks[clock_slot]; + private_data = (void *)chip_table->clocks[clock_slot]; /* * Perform a final fixup. Note that we will have used the * DPLL on the HPT372 which means we don't have to worry @@ -1144,9 +1145,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]); } - port_info[0] = port_info[1] = port; /* Now kick off ATA set up */ - return ata_pci_init_one(dev, port_info, 2); + port_info = *port; + port_info.private_data = private_data; + + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id hpt37x[] = { diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index ea1037d67860..f25154aed75d 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -488,7 +488,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT372N and friends - UDMA133 */ - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &hpt3x2n_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -496,8 +496,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &hpt3x2n_port_ops }; - struct ata_port_info *port_info[2]; - struct ata_port_info *port = &info; + struct ata_port_info port = info; + const struct ata_port_info *ppi[] = { &port, NULL }; u8 irqmask; u32 class_rev; @@ -585,9 +585,9 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* Set our private data up. We only need a few flags so we use it directly */ - port->private_data = NULL; + port.private_data = NULL; if (pci_mhz > 60) { - port->private_data = (void *)PCI66; + port.private_data = (void *)PCI66; /* * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in * the MISC. register to stretch the UltraDMA Tss timing. @@ -598,8 +598,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Now kick off ATA set up */ - port_info[0] = port_info[1] = port; - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id hpt3x2n[] = { diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index ac28ec8c50aa..bbabe7902fbb 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -100,10 +100,6 @@ static struct scsi_host_template hpt3x3_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations hpt3x3_port_ops = { @@ -175,7 +171,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev) static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &hpt3x3_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -183,11 +179,11 @@ static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x07, .port_ops = &hpt3x3_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; hpt3x3_init_chipset(dev); /* Now kick off ATA set up */ - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index 17bf9f3ed013..a769952646e1 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -257,10 +257,6 @@ static struct scsi_host_template it8213_sht = { .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations it8213_ops = { @@ -315,7 +311,7 @@ static const struct ata_port_operations it8213_ops = { static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &it8213_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -323,14 +319,14 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en .udma_mask = 0x1f, /* UDMA 100 */ .port_ops = &it8213_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + /* Current IT8213 stuff is single port */ + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* Current IT8213 stuff is single port */ - return ata_pci_init_one(pdev, port_info, 1); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id it8213_pci_tbl[] = { diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index f1f8cec8c224..ff9a6fd36657 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -620,10 +620,6 @@ static struct scsi_host_template it821x_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations it821x_smart_port_ops = { @@ -722,14 +718,14 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u8 conf; - static struct ata_port_info info_smart = { + static const struct ata_port_info info_smart = { .sht = &it821x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &it821x_smart_port_ops }; - static struct ata_port_info info_passthru = { + static const struct ata_port_info info_passthru = { .sht = &it821x_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -737,8 +733,8 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &it821x_passthru_port_ops }; - static struct ata_port_info *port_info[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; static char *mode[2] = { "pass through", "smart" }; /* Force the card into bypass mode if so requested */ @@ -751,11 +747,11 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]); if (conf == 0) - port_info[0] = port_info[1] = &info_passthru; + ppi[0] = &info_passthru; else - port_info[0] = port_info[1] = &info_smart; + ppi[0] = &info_smart; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 420c343e5711..b994351fbcd0 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -31,7 +31,7 @@ static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_ready(dev)) { + if (ata_dev_enabled(dev)) { ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 1daf78ac6efb..8d799e87f752 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -138,10 +138,6 @@ static struct scsi_host_template jmicron_sht = { .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations jmicron_ops = { @@ -195,7 +191,7 @@ static const struct ata_port_operations jmicron_ops = { static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &jmicron_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -205,9 +201,9 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i .port_ops = &jmicron_ops, }; - struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id jmicron_pci_tbl[] = { diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 837b7fe77dc7..edbfe0dbbf78 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -107,10 +107,6 @@ static struct scsi_host_template marvell_sht = { .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations marvell_ops = { @@ -165,7 +161,7 @@ static const struct ata_port_operations marvell_ops = { static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &marvell_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -175,7 +171,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i .port_ops = &marvell_ops, }; - static struct ata_port_info info_sata = { + static const struct ata_port_info info_sata = { .sht = &marvell_sht, /* Slave possible as its magically mapped not real */ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -186,13 +182,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i .port_ops = &marvell_ops, }; - struct ata_port_info *port_info[2] = { &info, &info_sata }; - int n_port = 2; + const struct ata_port_info *ppi[] = { &info, &info_sata }; if (pdev->device == 0x6101) - n_port = 1; + ppi[1] = &ata_dummy_port_info; - return ata_pci_init_one(pdev, port_info, n_port); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id marvell_pci_tbl[] = { diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 9587a89f9683..368fac7d168b 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -280,10 +280,6 @@ static struct scsi_host_template mpc52xx_ata_sht = { .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static struct ata_port_operations mpc52xx_ata_port_ops = { diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 3bfbd495f643..4ea42838297e 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -165,10 +165,6 @@ static struct scsi_host_template mpiix_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations mpiix_port_ops = { diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index dbba5b77d79c..81f563458666 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -37,10 +37,6 @@ static struct scsi_host_template netcell_sht = { .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations netcell_ops = { @@ -96,7 +92,7 @@ static const struct ata_port_operations netcell_ops = { static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &netcell_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, /* Actually we don't really care about these as the @@ -106,7 +102,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e .udma_mask = 0x3f, /* UDMA 133 */ .port_ops = &netcell_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *port_info[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -116,7 +112,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e ata_pci_clear_simplex(pdev); /* And let the library code do the work */ - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, port_info); } static const struct pci_device_id netcell_pci_tbl[] = { diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index ebc58a907d26..ea70ec744879 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -158,10 +158,6 @@ static struct scsi_host_template ns87410_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations ns87410_port_ops = { @@ -195,14 +191,14 @@ static struct ata_port_operations ns87410_port_ops = { static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &ns87410_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x0F, .port_ops = &ns87410_port_ops }; - static struct ata_port_info *port_info[2] = {&info, &info}; - return ata_pci_init_one(dev, port_info, 2); + const struct ata_port_info *ppi[] = { &info, NULL }; + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id ns87410[] = { diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 4d75d32e5826..29c23ddd6550 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -234,10 +234,6 @@ static struct scsi_host_template oldpiix_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations oldpiix_pata_ops = { @@ -293,20 +289,20 @@ static const struct ata_port_operations oldpiix_pata_ops = { static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &oldpiix_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma1-2 */ .port_ops = &oldpiix_pata_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id oldpiix_pci_tbl[] = { diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index 0af8a2c77cc9..1c44653e1e06 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -179,10 +179,6 @@ static struct scsi_host_template opti_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations opti_port_ops = { @@ -220,19 +216,19 @@ static struct ata_port_operations opti_port_ops = { static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &opti_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &opti_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; static int printed_version; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id opti[] = { diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 2843e480f216..3093b02286ce 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -363,10 +363,6 @@ static struct scsi_host_template optidma_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations optidma_port_ops = { @@ -486,14 +482,14 @@ done_nomsg: /* Wrong chip revision */ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info_82c700 = { + static const struct ata_port_info info_82c700 = { .sht = &optidma_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &optidma_port_ops }; - static struct ata_port_info info_82c700_udma = { + static const struct ata_port_info info_82c700_udma = { .sht = &optidma_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -501,8 +497,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x07, .port_ops = &optiplus_port_ops }; - static struct ata_port_info *port_info[2]; - struct ata_port_info *info = &info_82c700; + const struct ata_port_info *ppi[] = { &info_82c700, NULL }; static int printed_version; if (!printed_version++) @@ -514,10 +509,9 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */ if (optiplus_with_udma(dev)) - info = &info_82c700_udma; + ppi[0] = &info_82c700_udma; - port_info[0] = port_info[1] = info; - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id optidma[] = { diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 11245e331f77..4d44c7555db1 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -397,6 +397,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index ee636beb05e1..edbaf9d653b8 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -244,10 +244,6 @@ static struct scsi_host_template pdc202xx_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations pdc2024x_port_ops = { @@ -321,7 +317,7 @@ static struct ata_port_operations pdc2026x_port_ops = { static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info[3] = { + static const struct ata_port_info info[3] = { { .sht = &pdc202xx_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -348,9 +344,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id } }; - static struct ata_port_info *port_info[2]; - - port_info[0] = port_info[1] = &info[id->driver_data]; + const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL }; if (dev->device == PCI_DEVICE_ID_PROMISE_20265) { struct pci_dev *bridge = dev->bus->self; @@ -362,7 +356,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id return -ENODEV; } } - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id pdc202xx[] = { diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index a0a650c7f272..1f6384895a4f 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -48,6 +48,8 @@ static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unuse return 0; } +static int ata_dummy_ret0(struct ata_port *ap) { return 0; } + static struct scsi_host_template pata_platform_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -91,7 +93,7 @@ static struct ata_port_operations pata_platform_port_ops = { .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_dummy_ret0, }; static void pata_platform_setup_port(struct ata_ioports *ioaddr, diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1c54673e008d..ba96b54f5b87 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -200,10 +200,6 @@ static struct scsi_host_template radisys_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations radisys_pata_ops = { @@ -259,7 +255,7 @@ static const struct ata_port_operations radisys_pata_ops = { static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &radisys_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -267,13 +263,13 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e .udma_mask = 0x14, /* UDMA33/66 only */ .port_ops = &radisys_pata_ops, }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id radisys_pci_tbl[] = { diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 85c45290eeee..2bfd7ef42af5 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -40,7 +40,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_ready(dev)) { + if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; @@ -69,10 +69,6 @@ static struct scsi_host_template rz1000_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations rz1000_port_ops = { @@ -135,22 +131,20 @@ static int rz1000_fifo_disable(struct pci_dev *pdev) static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info *port_info[2]; - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &rz1000_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &rz1000_port_ops }; + const struct ata_port_info *ppi[] = { &info, NULL }; if (!printed_version++) printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); - if (rz1000_fifo_disable(pdev) == 0) { - port_info[0] = &info; - port_info[1] = &info; - return ata_pci_init_one(pdev, port_info, 2); - } + if (rz1000_fifo_disable(pdev) == 0) + return ata_pci_init_one(pdev, ppi); + printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); /* Not safe to use so skip */ return -ENODEV; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 66e8ff467c8d..225013ecf4b6 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -194,10 +194,6 @@ static struct scsi_host_template sc1200_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations sc1200_port_ops = { @@ -247,7 +243,7 @@ static struct ata_port_operations sc1200_port_ops = { static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &sc1200_sht, .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -255,10 +251,10 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x07, .port_ops = &sc1200_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; - /* Can't enable port 2 yet, see top comments */ - return ata_pci_init_one(dev, port_info, 1); + const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; + + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id sc1200[] = { diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 203f463ac39f..cca3aa225efe 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -984,10 +984,6 @@ static struct scsi_host_template scc_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations scc_pata_ops = { diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index b6e020383dd9..dee6e211949d 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -315,10 +315,6 @@ static struct scsi_host_template serverworks_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations serverworks_osb4_port_ops = { @@ -479,8 +475,7 @@ static void serverworks_fixup_ht1000(struct pci_dev *pdev) static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - int ports = 2; - static struct ata_port_info info[4] = { + static const struct ata_port_info info[4] = { { /* OSB4 */ .sht = &serverworks_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, @@ -511,8 +506,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id .port_ops = &serverworks_csb_port_ops } }; - static struct ata_port_info *port_info[2]; - struct ata_port_info *devinfo = &info[id->driver_data]; + const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL }; /* Force master latency timer to 64 PCI clocks */ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); @@ -521,7 +515,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { /* Select non UDMA capable OSB4 if we can't do fixups */ if ( serverworks_fixup_osb4(pdev) < 0) - devinfo = &info[1]; + ppi[0] = &info[1]; } /* setup CSB5/CSB6 : South Bridge and IDE option RAID */ else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) || @@ -531,11 +525,11 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id /* If the returned btr is the newer revision then select the right info block */ if (serverworks_fixup_csb(pdev) == 3) - devinfo = &info[3]; + ppi[0] = &info[3]; /* Is this the 3rd channel CSB6 IDE ? */ if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2) - ports = 1; + ppi[1] = &ata_dummy_port_info; } /* setup HT1000E */ else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) @@ -544,8 +538,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ata_pci_clear_simplex(pdev); - port_info[0] = port_info[1] = devinfo; - return ata_pci_init_one(pdev, port_info, ports); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index a5886f061c0b..440e2cb6ee75 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -232,10 +232,6 @@ static struct scsi_host_template sil680_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static struct ata_port_operations sil680_port_ops = { @@ -345,7 +341,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev) static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &sil680_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -353,7 +349,7 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &sil680_port_ops }; - static struct ata_port_info info_slow = { + static const struct ata_port_info info_slow = { .sht = &sil680_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, @@ -361,7 +357,7 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x3f, .port_ops = &sil680_port_ops }; - static struct ata_port_info *port_info[2] = {&info, &info}; + const struct ata_port_info *ppi[] = { &info, NULL }; static int printed_version; if (!printed_version++) @@ -370,12 +366,12 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id) switch(sil680_init_chip(pdev)) { case 0: - port_info[0] = port_info[1] = &info_slow; + ppi[0] = &info_slow; break; case 0x30: return -ENODEV; } - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index f5838cc11728..f2231267e011 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -38,8 +38,8 @@ #define DRV_VERSION "0.5.1" struct sis_chipset { - u16 device; /* PCI host ID */ - struct ata_port_info *info; /* Info block */ + u16 device; /* PCI host ID */ + const struct ata_port_info *info; /* Info block */ /* Probably add family, cable detect type etc here to clean up code later */ }; @@ -524,10 +524,6 @@ static struct scsi_host_template sis_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations sis_133_ops = { @@ -700,7 +696,7 @@ static const struct ata_port_operations sis_old_ops = { .port_start = ata_port_start, }; -static struct ata_port_info sis_info = { +static const struct ata_port_info sis_info = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -708,7 +704,7 @@ static struct ata_port_info sis_info = { .udma_mask = 0, .port_ops = &sis_old_ops, }; -static struct ata_port_info sis_info33 = { +static const struct ata_port_info sis_info33 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -716,35 +712,35 @@ static struct ata_port_info sis_info33 = { .udma_mask = ATA_UDMA2, /* UDMA 33 */ .port_ops = &sis_old_ops, }; -static struct ata_port_info sis_info66 = { +static const struct ata_port_info sis_info66 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA4, /* UDMA 66 */ .port_ops = &sis_66_ops, }; -static struct ata_port_info sis_info100 = { +static const struct ata_port_info sis_info100 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA5, .port_ops = &sis_100_ops, }; -static struct ata_port_info sis_info100_early = { +static const struct ata_port_info sis_info100_early = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .udma_mask = ATA_UDMA5, .pio_mask = 0x1f, /* pio0-4 */ .port_ops = &sis_66_ops, }; -struct ata_port_info sis_info133 = { +const struct ata_port_info sis_info133 = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &sis_133_ops, }; -static struct ata_port_info sis_info133_early = { +static const struct ata_port_info sis_info133_early = { .sht = &sis_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, /* pio0-4 */ @@ -827,8 +823,8 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - static struct ata_port_info *port_info[2]; - struct ata_port_info *port; + struct ata_port_info port; + const struct ata_port_info *ppi[] = { &port, NULL }; struct pci_dev *host = NULL; struct sis_chipset *chipset = NULL; struct sis_chipset *sets; @@ -968,13 +964,12 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (chipset == NULL) return -ENODEV; - port = chipset->info; - port->private_data = chipset; + port = *chipset->info; + port.private_data = chipset; sis_fixup(pdev, chipset); - port_info[0] = port_info[1] = port; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } static const struct pci_device_id sis_pci_tbl[] = { diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 9aeffdbe2829..f48491ad5f3a 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -301,20 +301,22 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev) static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info_dma = { + static const struct ata_port_info info_dma = { .sht = &sl82c105_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &sl82c105_port_ops }; - static struct ata_port_info info_early = { + static const struct ata_port_info info_early = { .sht = &sl82c105_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &sl82c105_port_ops }; - static struct ata_port_info *port_info[2] = { &info_early, &info_early }; + /* for now use only the first port */ + const struct ata_port_info *ppi[] = { &info_early, + &ata_dummy_port_info }; u32 val; int rev; @@ -324,17 +326,14 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n"); else if (rev <= 5) dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n"); - else { - port_info[0] = &info_dma; - port_info[1] = &info_dma; - } + else + ppi[0] = &info_dma; pci_read_config_dword(dev, 0x40, &val); val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - - return ata_pci_init_one(dev, port_info, 1); /* For now */ + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id sl82c105[] = { diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index 349887bf5b93..b1d3076dfe51 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -194,10 +194,6 @@ static struct scsi_host_template triflex_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations triflex_port_ops = { @@ -237,20 +233,20 @@ static struct ata_port_operations triflex_port_ops = { static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - static struct ata_port_info info = { + static const struct ata_port_info info = { .sht = &triflex_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &triflex_port_ops }; - static struct ata_port_info *port_info[2] = { &info, &info }; + const struct ata_port_info *ppi[] = { &info, NULL }; static int printed_version; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); - return ata_pci_init_one(dev, port_info, 2); + return ata_pci_init_one(dev, ppi); } static const struct pci_device_id triflex[] = { diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 362beb2f489c..e4c71f76bd55 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -301,10 +301,6 @@ static struct scsi_host_template via_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations via_port_ops = { @@ -425,7 +421,7 @@ static void via_config_fifo(struct pci_dev *pdev, unsigned int flags) static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { /* Early VIA without UDMA support */ - static struct ata_port_info via_mwdma_info = { + static const struct ata_port_info via_mwdma_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -433,7 +429,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* Ditto with IRQ masking required */ - static struct ata_port_info via_mwdma_info_borked = { + static const struct ata_port_info via_mwdma_info_borked = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -441,7 +437,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops_noirq, }; /* VIA UDMA 33 devices (and borked 66) */ - static struct ata_port_info via_udma33_info = { + static const struct ata_port_info via_udma33_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -450,7 +446,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* VIA UDMA 66 devices */ - static struct ata_port_info via_udma66_info = { + static const struct ata_port_info via_udma66_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -459,7 +455,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* VIA UDMA 100 devices */ - static struct ata_port_info via_udma100_info = { + static const struct ata_port_info via_udma100_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -468,7 +464,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &via_port_ops }; /* UDMA133 with bad AST (All current 133) */ - static struct ata_port_info via_udma133_info = { + static const struct ata_port_info via_udma133_info = { .sht = &via_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING, .pio_mask = 0x1f, @@ -476,7 +472,8 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = 0x7f, /* FIXME: should check north bridge */ .port_ops = &via_port_ops }; - struct ata_port_info *port_info[2], *type; + struct ata_port_info type; + const struct ata_port_info *ppi[] = { &type, NULL }; struct pci_dev *isa = NULL; const struct via_isa_bridge *config; static int printed_version; @@ -521,25 +518,25 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) switch(config->flags & VIA_UDMA) { case VIA_UDMA_NONE: if (config->flags & VIA_NO_UNMASK) - type = &via_mwdma_info_borked; + type = via_mwdma_info_borked; else - type = &via_mwdma_info; + type = via_mwdma_info; break; case VIA_UDMA_33: - type = &via_udma33_info; + type = via_udma33_info; break; case VIA_UDMA_66: - type = &via_udma66_info; + type = via_udma66_info; /* The 66 MHz devices require we enable the clock */ pci_read_config_dword(pdev, 0x50, &timing); timing |= 0x80008; pci_write_config_dword(pdev, 0x50, timing); break; case VIA_UDMA_100: - type = &via_udma100_info; + type = via_udma100_info; break; case VIA_UDMA_133: - type = &via_udma133_info; + type = via_udma133_info; break; default: WARN_ON(1); @@ -554,10 +551,9 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } /* We have established the device type, now fire it up */ - type->private_data = (void *)config; + type.private_data = (void *)config; - port_info[0] = port_info[1] = type; - return ata_pci_init_one(pdev, port_info, 2); + return ata_pci_init_one(pdev, ppi); } #ifdef CONFIG_PM diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index b3b62e985f19..bda5e7747c21 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -135,10 +135,6 @@ static struct scsi_host_template inic_sht = { .slave_configure = inic_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const int scr_map[] = { diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index a097595d4dc7..4cea3ef75226 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -325,10 +325,6 @@ static struct scsi_host_template nv_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static struct scsi_host_template nv_adma_sht = { @@ -347,10 +343,6 @@ static struct scsi_host_template nv_adma_sht = { .slave_configure = nv_adma_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations nv_generic_ops = { @@ -465,7 +457,7 @@ static const struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; -static struct ata_port_info nv_port_info[] = { +static const struct ata_port_info nv_port_info[] = { /* generic */ { .sht = &nv_sht, @@ -1545,7 +1537,7 @@ static void nv_adma_error_handler(struct ata_port *ap) static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; - const struct ata_port_info *ppi[2]; + const struct ata_port_info *ppi[] = { NULL, NULL }; struct ata_host *host; struct nv_host_priv *hpriv; int rc; @@ -1573,8 +1565,8 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) type = ADMA; } - ppi[0] = ppi[1] = &nv_port_info[type]; - rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); + ppi[0] = &nv_port_info[type]; + rc = ata_pci_prepare_native_host(pdev, ppi, &host); if (rc) return rc; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 0a1e417f309c..e8483aadd11b 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -182,10 +182,6 @@ static struct scsi_host_template sil_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations sil_ops = { diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index b97ee9f31aec..a69d78cd8e9b 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -380,10 +380,6 @@ static struct scsi_host_template sil24_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations sil24_ops = { diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index d8ee062e82fc..ee66c5fa7ac8 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -129,7 +129,7 @@ static const struct ata_port_operations sis_ops = { .port_start = ata_port_start, }; -static struct ata_port_info sis_port_info = { +static const struct ata_port_info sis_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, .mwdma_mask = 0x7, @@ -255,7 +255,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; struct ata_port_info pi = sis_port_info; - const struct ata_port_info *ppi[2] = { &pi, &pi }; + const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; u32 genctl, val; u8 pmr; @@ -335,7 +335,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) break; } - rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); + rc = ata_pci_prepare_native_host(pdev, ppi, &host); if (rc) return rc; diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index f74e383de083..006f5e352658 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -125,7 +125,7 @@ static const struct ata_port_operations uli_ops = { .port_start = ata_port_start, }; -static struct ata_port_info uli_port_info = { +static const struct ata_port_info uli_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_IGN_SIMPLEX, .pio_mask = 0x1f, /* pio0-4 */ @@ -201,19 +201,33 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) n_ports = 2; if (board_idx == uli_5287) n_ports = 4; - rc = ata_pci_prepare_native_host(pdev, ppi, n_ports, &host); - if (rc) - return rc; + + /* allocate the host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; host->private_data = hpriv; + /* the first two ports are standard SFF */ + rc = ata_pci_init_native_host(host); + if (rc) + return rc; + + rc = ata_pci_init_bmdma(host); + if (rc) + return rc; + iomap = host->iomap; switch (board_idx) { case uli_5287: + /* If there are four, the last two live right after + * the standard SFF ports. + */ hpriv->scr_cfg_addr[0] = ULI5287_BASE; hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 939c9246fdd1..d105d2c189d2 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -116,10 +116,6 @@ static struct scsi_host_template svia_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations vt6420_sata_ops = { @@ -415,7 +411,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) struct ata_host *host; int rc; - rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); + rc = ata_pci_prepare_native_host(pdev, ppi, &host); if (rc) return rc; *r_host = host; diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h index 231da8fc2200..0f2208d8d5ef 100644 --- a/drivers/ata/sis.h +++ b/drivers/ata/sis.h @@ -2,4 +2,4 @@ struct ata_port_info; /* pata_sis.c */ -extern struct ata_port_info sis_info133; +extern const struct ata_port_info sis_info133; |