summaryrefslogtreecommitdiffstats
path: root/drivers/block/paride/fit2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/paride/fit2.c')
-rw-r--r--drivers/block/paride/fit2.c151
1 files changed, 151 insertions, 0 deletions
diff --git a/drivers/block/paride/fit2.c b/drivers/block/paride/fit2.c
new file mode 100644
index 000000000000..e0f0691d8bc2
--- /dev/null
+++ b/drivers/block/paride/fit2.c
@@ -0,0 +1,151 @@
+/*
+ fit2.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ fit2.c is a low-level protocol driver for the older version
+ of the Fidelity International Technology parallel port adapter.
+ This adapter is used in their TransDisk 2000 and older TransDisk
+ 3000 portable hard-drives. As far as I can tell, this device
+ supports 4-bit mode _only_.
+
+ Newer models of the FIT products use an enhanced protocol.
+ The "fit3" protocol module should support current drives.
+
+*/
+
+#define FIT2_VERSION "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+
+NB: The FIT adapter does not appear to use the control registers.
+So, we map ALT_STATUS to STATUS and NO-OP writes to the device
+control register - this means that IDE reset will not work on these
+devices.
+
+*/
+
+static void fit2_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ if (cont == 1) return;
+ w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
+}
+
+static int fit2_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ if (cont) {
+ if (regr != 6) return 0xff;
+ r = 7;
+ } else r = regr + 0x10;
+
+ w2(0xc); w0(r); w2(4); w2(5);
+ w0(0); a = r1();
+ w0(1); b = r1();
+ w2(4);
+
+ return j44(a,b);
+
+}
+
+static void fit2_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b, c, d;
+
+ w2(0xc); w0(0x10);
+
+ for (k=0;k<count/4;k++) {
+
+ w2(4); w2(5);
+ w0(0); a = r1(); w0(1); b = r1();
+ w0(3); c = r1(); w0(2); d = r1();
+ buf[4*k+0] = j44(a,b);
+ buf[4*k+1] = j44(d,c);
+
+ w2(4); w2(5);
+ a = r1(); w0(3); b = r1();
+ w0(1); c = r1(); w0(0); d = r1();
+ buf[4*k+2] = j44(d,c);
+ buf[4*k+3] = j44(a,b);
+
+ }
+
+ w2(4);
+
+}
+
+static void fit2_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+
+ w2(0xc); w0(0);
+ for (k=0;k<count/2;k++) {
+ w2(4); w0(buf[2*k]);
+ w2(5); w0(buf[2*k+1]);
+ }
+ w2(4);
+}
+
+static void fit2_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(0xcc);
+}
+
+static void fit2_disconnect ( PIA *pi )
+
+{ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
+ pi->device,FIT2_VERSION,pi->port,pi->delay);
+
+}
+
+static struct pi_protocol fit2 = {
+ .owner = THIS_MODULE,
+ .name = "fit2",
+ .max_mode = 1,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = fit2_write_regr,
+ .read_regr = fit2_read_regr,
+ .write_block = fit2_write_block,
+ .read_block = fit2_read_block,
+ .connect = fit2_connect,
+ .disconnect = fit2_disconnect,
+ .log_adapter = fit2_log_adapter,
+};
+
+static int __init fit2_init(void)
+{
+ return pi_register(&fit2)-1;
+}
+
+static void __exit fit2_exit(void)
+{
+ pi_unregister(&fit2);
+}
+
+MODULE_LICENSE("GPL");
+module_init(fit2_init)
+module_exit(fit2_exit)