diff options
Diffstat (limited to 'drivers/bluetooth/btusb.c')
| -rw-r--r-- | drivers/bluetooth/btusb.c | 240 |
1 files changed, 147 insertions, 93 deletions
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index de7b236eeae7..b4cf8d9c9dac 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -24,19 +24,21 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/firmware.h> +#include <asm/unaligned.h> #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> #include "btintel.h" #include "btbcm.h" +#include "btrtl.h" #define VERSION "0.8" static bool disable_scofix; static bool force_scofix; -static bool reset = 1; +static bool reset = true; static struct usb_driver btusb_driver; @@ -57,6 +59,7 @@ static struct usb_driver btusb_driver; #define BTUSB_AMP 0x4000 #define BTUSB_QCA_ROME 0x8000 #define BTUSB_BCM_APPLE 0x10000 +#define BTUSB_REALTEK 0x20000 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -176,6 +179,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, @@ -184,6 +188,8 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, @@ -200,6 +206,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, @@ -207,6 +214,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, @@ -216,6 +224,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, /* QCA ROME chipset */ + { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME }, @@ -260,7 +269,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC }, /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */ - { USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE }, + { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE }, /* Digianswer devices */ { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, @@ -288,6 +297,28 @@ static const struct usb_device_id blacklist_table[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), .driver_info = BTUSB_IGNORE }, + /* Realtek Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723AE Bluetooth devices */ + { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723BE Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8821AE Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK }, + { } /* Terminating entry */ }; @@ -303,6 +334,7 @@ static const struct usb_device_id blacklist_table[] = { #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 +#define BTUSB_RESET_RESUME 10 struct btusb_data { struct hci_dev *hdev; @@ -892,7 +924,7 @@ static int btusb_open(struct hci_dev *hdev) */ if (data->setup_on_usb) { err = data->setup_on_usb(hdev); - if (err <0) + if (err < 0) return err; } @@ -1271,28 +1303,6 @@ static void btusb_waker(struct work_struct *work) usb_autopm_put_interface(data->intf); } -static struct sk_buff *btusb_read_local_version(struct hci_dev *hdev) -{ - struct sk_buff *skb; - - skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, - HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", - hdev->name, PTR_ERR(skb)); - return skb; - } - - if (skb->len != sizeof(struct hci_rp_read_local_version)) { - BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", - hdev->name); - kfree_skb(skb); - return ERR_PTR(-EIO); - } - - return skb; -} - static int btusb_setup_bcm92035(struct hci_dev *hdev) { struct sk_buff *skb; @@ -1313,36 +1323,40 @@ static int btusb_setup_csr(struct hci_dev *hdev) { struct hci_rp_read_local_version *rp; struct sk_buff *skb; - int ret; BT_DBG("%s", hdev->name); - skb = btusb_read_local_version(hdev); - if (IS_ERR(skb)) - return -PTR_ERR(skb); + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + int err = PTR_ERR(skb); + BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err); + return err; + } + + if (skb->len != sizeof(struct hci_rp_read_local_version)) { + BT_ERR("%s: CSR: Local version length mismatch", hdev->name); + kfree_skb(skb); + return -EIO; + } rp = (struct hci_rp_read_local_version *)skb->data; - if (!rp->status) { - if (le16_to_cpu(rp->manufacturer) != 10) { - /* Clear the reset quirk since this is not an actual - * early Bluetooth 1.1 device from CSR. - */ - clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + if (le16_to_cpu(rp->manufacturer) != 10) { + /* Clear the reset quirk since this is not an actual + * early Bluetooth 1.1 device from CSR. + */ + clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); - /* These fake CSR controllers have all a broken - * stored link key handling and so just disable it. - */ - set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, - &hdev->quirks); - } + /* These fake CSR controllers have all a broken + * stored link key handling and so just disable it. + */ + set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); } - ret = -bt_to_errno(rp->status); - kfree_skb(skb); - return ret; + return 0; } static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, @@ -1552,12 +1566,6 @@ static int btusb_setup_intel(struct hci_dev *hdev) } ver = (struct intel_version *)skb->data; - if (ver->status) { - BT_ERR("%s Intel fw version event failed (%02x)", hdev->name, - ver->status); - kfree_skb(skb); - return -bt_to_errno(ver->status); - } BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x", hdev->name, ver->hw_platform, ver->hw_variant, @@ -1591,6 +1599,8 @@ static int btusb_setup_intel(struct hci_dev *hdev) } fw_ptr = fw->data; + kfree_skb(skb); + /* This Intel specific command enables the manufacturer mode of the * controller. * @@ -1605,15 +1615,6 @@ static int btusb_setup_intel(struct hci_dev *hdev) return PTR_ERR(skb); } - if (skb->data[0]) { - u8 evt_status = skb->data[0]; - - BT_ERR("%s enable Intel manufacturer mode event failed (%02x)", - hdev->name, evt_status); - kfree_skb(skb); - release_firmware(fw); - return -bt_to_errno(evt_status); - } kfree_skb(skb); disable_patch = 1; @@ -1932,6 +1933,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) struct intel_boot_params *params; const struct firmware *fw; const u8 *fw_ptr; + u32 frag_len; char fwname[64]; ktime_t calltime, delta, rettime; unsigned long long duration; @@ -1959,13 +1961,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) } ver = (struct intel_version *)skb->data; - if (ver->status) { - BT_ERR("%s: Intel version command failure (%02x)", - hdev->name, ver->status); - err = -bt_to_errno(ver->status); - kfree_skb(skb); - return err; - } /* The hardware platform number has a fixed value of 0x37 and * for now only accept this single value. @@ -2040,13 +2035,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) } params = (struct intel_boot_params *)skb->data; - if (params->status) { - BT_ERR("%s: Intel boot parameters command failure (%02x)", - hdev->name, params->status); - err = -bt_to_errno(params->status); - kfree_skb(skb); - return err; - } BT_INFO("%s: Device revision is %u", hdev->name, le16_to_cpu(params->dev_revid)); @@ -2096,6 +2084,12 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) BT_INFO("%s: Found device firmware: %s", hdev->name, fwname); + /* Save the DDC file name for later use to apply once the firmware + * downloading is done. + */ + snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc", + le16_to_cpu(params->dev_revid)); + kfree_skb(skb); if (fw->size < 644) { @@ -2138,24 +2132,33 @@ static int btusb_setup_intel_new(struct hci_dev *hdev) } fw_ptr = fw->data + 644; + frag_len = 0; while (fw_ptr - fw->data < fw->size) { - struct hci_command_hdr *cmd = (void *)fw_ptr; - u8 cmd_len; + struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len); - cmd_len = sizeof(*cmd) + cmd->plen; + frag_len += sizeof(*cmd) + cmd->plen; - /* Send each command from the firmware data buffer as - * a single Data fragment. + /* The paramter length of the secure send command requires + * a 4 byte alignment. It happens so that the firmware file + * contains proper Intel_NOP commands to align the fragments + * as needed. + * + * Send set of commands with 4 byte alignment from the + * firmware data buffer as a single Data fragement. */ - err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr); - if (err < 0) { - BT_ERR("%s: Failed to send firmware data (%d)", - hdev->name, err); - goto done; - } + if (!(frag_len % 4)) { + err = btusb_intel_secure_send(hdev, 0x01, frag_len, + fw_ptr); + if (err < 0) { + BT_ERR("%s: Failed to send firmware data (%d)", + hdev->name, err); + goto done; + } - fw_ptr += cmd_len; + fw_ptr += frag_len; + frag_len = 0; + } } set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); @@ -2248,6 +2251,43 @@ done: clear_bit(BTUSB_BOOTLOADER, &data->flags); + /* Once the device is running in operational mode, it needs to apply + * the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it fails + * to load the file, no need to fail the setup. + */ + err = request_firmware_direct(&fw, fwname, &hdev->dev); + if (err < 0) + return 0; + + BT_INFO("%s: Found Intel DDC parameters: %s", hdev->name, fwname); + + fw_ptr = fw->data; + + /* DDC file contains one or more DDC structure which has + * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2). + */ + while (fw->size > fw_ptr - fw->data) { + u8 cmd_plen = fw_ptr[0] + sizeof(u8); + + skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Failed to send Intel_Write_DDC (%ld)", + hdev->name, PTR_ERR(skb)); + release_firmware(fw); + return PTR_ERR(skb); + } + + fw_ptr += cmd_plen; + kfree_skb(skb); + } + + release_firmware(fw); + + BT_INFO("%s: Applying Intel DDC parameters completed", hdev->name); + return 0; } @@ -2279,13 +2319,6 @@ static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code) return; } - if (skb->data[0] != 0x00) { - BT_ERR("%s: Exception info command failure (%02x)", - hdev->name, skb->data[0]); - kfree_skb(skb); - return; - } - BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1)); kfree_skb(skb); @@ -2393,6 +2426,7 @@ struct qca_device_info { static const struct qca_device_info qca_devices_table[] = { { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */ { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */ + { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */ { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */ { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */ { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */ @@ -2577,7 +2611,7 @@ static int btusb_setup_qca(struct hci_dev *hdev) int i, err; err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, - sizeof(ver)); + sizeof(ver)); if (err < 0) return err; @@ -2776,6 +2810,18 @@ static int btusb_probe(struct usb_interface *intf, hdev->set_bdaddr = btusb_set_bdaddr_ath3012; } +#ifdef CONFIG_BT_HCIBTUSB_RTL + if (id->driver_info & BTUSB_REALTEK) { + hdev->setup = btrtl_setup_realtek; + + /* Realtek devices lose their updated firmware over suspend, + * but the USB hub doesn't notice any status change. + * Explicitly request a device reset on resume. + */ + set_bit(BTUSB_RESET_RESUME, &data->flags); + } +#endif + if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ data->isoc = NULL; @@ -2906,6 +2952,14 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message) btusb_stop_traffic(data); usb_kill_anchored_urbs(&data->tx_anchor); + /* Optionally request a device reset on resume, but only when + * wakeups are disabled. If wakeups are enabled we assume the + * device will stay powered up throughout suspend. + */ + if (test_bit(BTUSB_RESET_RESUME, &data->flags) && + !device_may_wakeup(&data->udev->dev)) + data->udev->reset_resume = 1; + return 0; } |