summaryrefslogtreecommitdiffstats
path: root/drivers/char/rio/cirrus.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/rio/cirrus.h')
-rw-r--r--drivers/char/rio/cirrus.h110
1 files changed, 1 insertions, 109 deletions
diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
index 89bd94eb45be..f4f837f86829 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/char/rio/cirrus.h
@@ -40,73 +40,7 @@
#endif
#define _cirrus_h 1
-
-
-/* Bit fields for particular registers */
-
-/* GCR */
-#define GCR_SERIAL 0x00 /* Configure as serial channel */
-#define GCR_PARALLEL 0x80 /* Configure as parallel channel */
-
-/* RDSR - when status read from FIFO */
-#define RDSR_BREAK 0x08 /* Break received */
-#define RDSR_TIMEOUT 0x80 /* No new data timeout */
-#define RDSR_SC1 0x10 /* Special char 1 (tx XON) matched */
-#define RDSR_SC2 0x20 /* Special char 2 (tx XOFF) matched */
-#define RDSR_SC12_MASK 0x30 /* Mask for special chars 1 and 2 */
-
-/* PPR */
-#define PPR_DEFAULT 0x31 /* Default value - for a 25Mhz clock gives
- a timeout period of 1ms */
-
-/* LIVR */
-#define LIVR_EXCEPTION 0x07 /* Receive exception interrupt */
-
-/* CCR */
-#define CCR_RESET 0x80 /* Reset channel */
-#define CCR_CHANGE 0x4e /* COR's have changed - NB always change all
- COR's */
-#define CCR_WFLUSH 0x82 /* Flush transmit FIFO and TSR / THR */
-
-#define CCR_SENDSC1 0x21 /* Send special character one */
-#define CCR_SENDSC2 0x22 /* Send special character two */
-#define CCR_SENDSC3 0x23 /* Send special character three */
-#define CCR_SENDSC4 0x24 /* Send special character four */
-
-#define CCR_TENABLE 0x18 /* Enable transmitter */
-#define CCR_TDISABLE 0x14 /* Disable transmitter */
-#define CCR_RENABLE 0x12 /* Enable receiver */
-#define CCR_RDISABLE 0x11 /* Disable receiver */
-
-#define CCR_READY 0x00 /* CCR is ready for another command */
-
-/* CCSR */
-#define CCSR_TXENABLE 0x08 /* Transmitter enable */
-#define CCSR_RXENABLE 0x80 /* Receiver enable */
-#define CCSR_TXFLOWOFF 0x04 /* Transmit flow off */
-#define CCSR_TXFLOWON 0x02 /* Transmit flow on */
-
-/* SVRR */
-#define SVRR_RECEIVE 0x01 /* Receive interrupt pending */
-#define SVRR_TRANSMIT 0x02 /* Transmit interrupt pending */
-#define SVRR_MODEM 0x04 /* Modem interrupt pending */
-
-/* CAR */
-#define CAR_PORTS 0x03 /* Bit fields for ports */
-
-/* IER */
-#define IER_MODEM 0x80 /* Change in modem status */
-#define IER_RECEIVE 0x10 /* Good data / data exception */
-#define IER_TRANSMITR 0x04 /* Transmit ready (FIFO empty) */
-#define IER_TRANSMITE 0x02 /* Transmit empty */
-#define IER_TIMEOUT 0x01 /* Timeout on no data */
-
-#define IER_DEFAULT 0x94 /* Default values */
-#define IER_PARALLEL 0x84 /* Default for Parallel */
-#define IER_EMPTY 0x92 /* Transmitter empty rather than ready */
-
-/* COR1 - Driver only */
-#define COR1_INPCK 0x10 /* Check parity of received characters */
+/* Bit fields for particular registers shared with driver */
/* COR1 - driver and RTA */
#define COR1_ODD 0x80 /* Odd parity */
@@ -222,35 +156,6 @@
#define MSVR1_HOST 0xf3 /* The bits the host wants */
-/* MSVR2 */
-#define MSVR2_DSR 0x02 /* DSR output pin (DTR on Cirrus) */
-
-/* MCOR */
-#define MCOR_CD 0x80 /* CD (DSR on Cirrus) */
-#define MCOR_RTS 0x40 /* RTS (CTS on Cirrus) */
-#define MCOR_RI 0x20 /* RI */
-#define MCOR_DTR 0x10 /* DTR (CD on Cirrus) */
-
-#define MCOR_DEFAULT (MCOR_CD | MCOR_RTS | MCOR_RI | MCOR_DTR)
-#define MCOR_FULLMODEM MCOR_DEFAULT
-#define MCOR_RJ45 (MCOR_CD | MCOR_RTS | MCOR_DTR)
-#define MCOR_RESTRICTED (MCOR_CD | MCOR_RTS)
-
-/* More MCOR - H/W Handshake (flowcontrol) stuff */
-#define MCOR_THRESH8 0x08 /* eight characters then we stop */
-#define MCOR_THRESH9 0x09 /* nine characters then we stop */
-#define MCOR_THRESH10 0x0A /* ten characters then we stop */
-#define MCOR_THRESH11 0x0B /* eleven characters then we stop */
-
-#define MCOR_THRESHBITS 0x0F /* mask for ANDing out the above */
-
-#define MCOR_THRESHOLD MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */
-
-
-/* RTPR */
-#define RTPR_DEFAULT 0x02 /* Default */
-
-
/* Defines for the subscripts of a CONFIG packet */
#define CONFIG_COR1 1 /* Option register 1 */
#define CONFIG_COR2 2 /* Option register 2 */
@@ -264,19 +169,6 @@
#define CONFIG_TXBAUD 10 /* Tx baud rate */
#define CONFIG_RXBAUD 11 /* Rx baud rate */
-/* Port status stuff */
-#define IDLE_CLOSED 0 /* Closed */
-#define IDLE_OPEN 1 /* Idle open */
-#define IDLE_BREAK 2 /* Idle on break */
-
-/* Subscript of MODEM STATUS packet */
-#define MODEM_VALUE 3 /* Current values of handshake pins */
-/* Subscript of SBREAK packet */
-#define BREAK_LENGTH 1 /* Length of a break in slices of 0.01 seconds
- 0 = stay on break until an EBREAK command
- is sent */
-
-
#define PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */
/* Packet types going from Host to remote - with the exception of OPEN, MOPEN,