summaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm/tpm_tis.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/tpm/tpm_tis.c')
-rw-r--r--drivers/char/tpm/tpm_tis.c829
1 files changed, 64 insertions, 765 deletions
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index a507006728e0..eaf5730d79eb 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -29,40 +29,7 @@
#include <linux/acpi.h>
#include <linux/freezer.h>
#include "tpm.h"
-
-enum tis_access {
- TPM_ACCESS_VALID = 0x80,
- TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
- TPM_ACCESS_REQUEST_PENDING = 0x04,
- TPM_ACCESS_REQUEST_USE = 0x02,
-};
-
-enum tis_status {
- TPM_STS_VALID = 0x80,
- TPM_STS_COMMAND_READY = 0x40,
- TPM_STS_GO = 0x20,
- TPM_STS_DATA_AVAIL = 0x10,
- TPM_STS_DATA_EXPECT = 0x08,
-};
-
-enum tis_int_flags {
- TPM_GLOBAL_INT_ENABLE = 0x80000000,
- TPM_INTF_BURST_COUNT_STATIC = 0x100,
- TPM_INTF_CMD_READY_INT = 0x080,
- TPM_INTF_INT_EDGE_FALLING = 0x040,
- TPM_INTF_INT_EDGE_RISING = 0x020,
- TPM_INTF_INT_LEVEL_LOW = 0x010,
- TPM_INTF_INT_LEVEL_HIGH = 0x008,
- TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
- TPM_INTF_STS_VALID_INT = 0x002,
- TPM_INTF_DATA_AVAIL_INT = 0x001,
-};
-
-enum tis_defaults {
- TIS_MEM_LEN = 0x5000,
- TIS_SHORT_TIMEOUT = 750, /* ms */
- TIS_LONG_TIMEOUT = 2000, /* 2 sec */
-};
+#include "tpm_tis_core.h"
struct tpm_info {
struct resource res;
@@ -73,30 +40,30 @@ struct tpm_info {
int irq;
};
-/* Some timeout values are needed before it is known whether the chip is
- * TPM 1.0 or TPM 2.0.
- */
-#define TIS_TIMEOUT_A_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
-#define TIS_TIMEOUT_B_MAX max(TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
-#define TIS_TIMEOUT_C_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
-#define TIS_TIMEOUT_D_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
-
-#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
-#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
-#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12))
-#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
-#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
-#define TPM_STS(l) (0x0018 | ((l) << 12))
-#define TPM_STS3(l) (0x001b | ((l) << 12))
-#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
-
-#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
-#define TPM_RID(l) (0x0F04 | ((l) << 12))
-
-struct priv_data {
- bool irq_tested;
+struct tpm_tis_tcg_phy {
+ struct tpm_tis_data priv;
+ void __iomem *iobase;
};
+static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *data)
+{
+ return container_of(data, struct tpm_tis_tcg_phy, priv);
+}
+
+static bool interrupts = true;
+module_param(interrupts, bool, 0444);
+MODULE_PARM_DESC(interrupts, "Enable interrupts");
+
+static bool itpm;
+module_param(itpm, bool, 0444);
+MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
+
+static bool force;
+#ifdef CONFIG_X86
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
+#endif
+
#if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
static int has_hid(struct acpi_device *dev, const char *hid)
{
@@ -120,744 +87,82 @@ static inline int is_itpm(struct acpi_device *dev)
}
#endif
-/* Before we attempt to access the TPM we must see that the valid bit is set.
- * The specification says that this bit is 0 at reset and remains 0 until the
- * 'TPM has gone through its self test and initialization and has established
- * correct values in the other bits.' */
-static int wait_startup(struct tpm_chip *chip, int l)
-{
- unsigned long stop = jiffies + chip->vendor.timeout_a;
- do {
- if (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
- TPM_ACCESS_VALID)
- return 0;
- msleep(TPM_TIMEOUT);
- } while (time_before(jiffies, stop));
- return -1;
-}
-
-static int check_locality(struct tpm_chip *chip, int l)
-{
- if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
- return chip->vendor.locality = l;
-
- return -1;
-}
-
-static void release_locality(struct tpm_chip *chip, int l, int force)
-{
- if (force || (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
- (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID))
- iowrite8(TPM_ACCESS_ACTIVE_LOCALITY,
- chip->vendor.iobase + TPM_ACCESS(l));
-}
-
-static int request_locality(struct tpm_chip *chip, int l)
-{
- unsigned long stop, timeout;
- long rc;
-
- if (check_locality(chip, l) >= 0)
- return l;
-
- iowrite8(TPM_ACCESS_REQUEST_USE,
- chip->vendor.iobase + TPM_ACCESS(l));
-
- stop = jiffies + chip->vendor.timeout_a;
-
- if (chip->vendor.irq) {
-again:
- timeout = stop - jiffies;
- if ((long)timeout <= 0)
- return -1;
- rc = wait_event_interruptible_timeout(chip->vendor.int_queue,
- (check_locality
- (chip, l) >= 0),
- timeout);
- if (rc > 0)
- return l;
- if (rc == -ERESTARTSYS && freezing(current)) {
- clear_thread_flag(TIF_SIGPENDING);
- goto again;
- }
- } else {
- /* wait for burstcount */
- do {
- if (check_locality(chip, l) >= 0)
- return l;
- msleep(TPM_TIMEOUT);
- }
- while (time_before(jiffies, stop));
- }
- return -1;
-}
-
-static u8 tpm_tis_status(struct tpm_chip *chip)
-{
- return ioread8(chip->vendor.iobase +
- TPM_STS(chip->vendor.locality));
-}
-
-static void tpm_tis_ready(struct tpm_chip *chip)
-{
- /* this causes the current command to be aborted */
- iowrite8(TPM_STS_COMMAND_READY,
- chip->vendor.iobase + TPM_STS(chip->vendor.locality));
-}
-
-static int get_burstcount(struct tpm_chip *chip)
-{
- unsigned long stop;
- int burstcnt;
-
- /* wait for burstcount */
- /* which timeout value, spec has 2 answers (c & d) */
- stop = jiffies + chip->vendor.timeout_d;
- do {
- burstcnt = ioread8(chip->vendor.iobase +
- TPM_STS(chip->vendor.locality) + 1);
- burstcnt += ioread8(chip->vendor.iobase +
- TPM_STS(chip->vendor.locality) +
- 2) << 8;
- if (burstcnt)
- return burstcnt;
- msleep(TPM_TIMEOUT);
- } while (time_before(jiffies, stop));
- return -EBUSY;
-}
-
-static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+static int tpm_tcg_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
+ u8 *result)
{
- int size = 0, burstcnt;
- while (size < count &&
- wait_for_tpm_stat(chip,
- TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- chip->vendor.timeout_c,
- &chip->vendor.read_queue, true)
- == 0) {
- burstcnt = get_burstcount(chip);
- for (; burstcnt > 0 && size < count; burstcnt--)
- buf[size++] = ioread8(chip->vendor.iobase +
- TPM_DATA_FIFO(chip->vendor.
- locality));
- }
- return size;
-}
-
-static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
-{
- int size = 0;
- int expected, status;
-
- if (count < TPM_HEADER_SIZE) {
- size = -EIO;
- goto out;
- }
-
- /* read first 10 bytes, including tag, paramsize, and result */
- if ((size =
- recv_data(chip, buf, TPM_HEADER_SIZE)) < TPM_HEADER_SIZE) {
- dev_err(chip->pdev, "Unable to read header\n");
- goto out;
- }
-
- expected = be32_to_cpu(*(__be32 *) (buf + 2));
- if (expected > count) {
- size = -EIO;
- goto out;
- }
-
- if ((size +=
- recv_data(chip, &buf[TPM_HEADER_SIZE],
- expected - TPM_HEADER_SIZE)) < expected) {
- dev_err(chip->pdev, "Unable to read remainder of result\n");
- size = -ETIME;
- goto out;
- }
-
- wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
- &chip->vendor.int_queue, false);
- status = tpm_tis_status(chip);
- if (status & TPM_STS_DATA_AVAIL) { /* retry? */
- dev_err(chip->pdev, "Error left over data\n");
- size = -EIO;
- goto out;
- }
-
-out:
- tpm_tis_ready(chip);
- release_locality(chip, chip->vendor.locality, 0);
- return size;
-}
-
-static bool itpm;
-module_param(itpm, bool, 0444);
-MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
-
-/*
- * If interrupts are used (signaled by an irq set in the vendor structure)
- * tpm.c can skip polling for the data to be available as the interrupt is
- * waited for here
- */
-static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- int rc, status, burstcnt;
- size_t count = 0;
-
- if (request_locality(chip, 0) < 0)
- return -EBUSY;
-
- status = tpm_tis_status(chip);
- if ((status & TPM_STS_COMMAND_READY) == 0) {
- tpm_tis_ready(chip);
- if (wait_for_tpm_stat
- (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
- &chip->vendor.int_queue, false) < 0) {
- rc = -ETIME;
- goto out_err;
- }
- }
-
- while (count < len - 1) {
- burstcnt = get_burstcount(chip);
- for (; burstcnt > 0 && count < len - 1; burstcnt--) {
- iowrite8(buf[count], chip->vendor.iobase +
- TPM_DATA_FIFO(chip->vendor.locality));
- count++;
- }
-
- wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
- &chip->vendor.int_queue, false);
- status = tpm_tis_status(chip);
- if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
- rc = -EIO;
- goto out_err;
- }
- }
-
- /* write last byte */
- iowrite8(buf[count],
- chip->vendor.iobase + TPM_DATA_FIFO(chip->vendor.locality));
- wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
- &chip->vendor.int_queue, false);
- status = tpm_tis_status(chip);
- if ((status & TPM_STS_DATA_EXPECT) != 0) {
- rc = -EIO;
- goto out_err;
- }
+ struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
+ while (len--)
+ *result++ = ioread8(phy->iobase + addr);
return 0;
-
-out_err:
- tpm_tis_ready(chip);
- release_locality(chip, chip->vendor.locality, 0);
- return rc;
-}
-
-static void disable_interrupts(struct tpm_chip *chip)
-{
- u32 intmask;
-
- intmask =
- ioread32(chip->vendor.iobase +
- TPM_INT_ENABLE(chip->vendor.locality));
- intmask &= ~TPM_GLOBAL_INT_ENABLE;
- iowrite32(intmask,
- chip->vendor.iobase +
- TPM_INT_ENABLE(chip->vendor.locality));
- devm_free_irq(chip->pdev, chip->vendor.irq, chip);
- chip->vendor.irq = 0;
-}
-
-/*
- * If interrupts are used (signaled by an irq set in the vendor structure)
- * tpm.c can skip polling for the data to be available as the interrupt is
- * waited for here
- */
-static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- int rc;
- u32 ordinal;
- unsigned long dur;
-
- rc = tpm_tis_send_data(chip, buf, len);
- if (rc < 0)
- return rc;
-
- /* go and do it */
- iowrite8(TPM_STS_GO,
- chip->vendor.iobase + TPM_STS(chip->vendor.locality));
-
- if (chip->vendor.irq) {
- ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
-
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- dur = tpm2_calc_ordinal_duration(chip, ordinal);
- else
- dur = tpm_calc_ordinal_duration(chip, ordinal);
-
- if (wait_for_tpm_stat
- (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
- &chip->vendor.read_queue, false) < 0) {
- rc = -ETIME;
- goto out_err;
- }
- }
- return len;
-out_err:
- tpm_tis_ready(chip);
- release_locality(chip, chip->vendor.locality, 0);
- return rc;
-}
-
-static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
-{
- int rc, irq;
- struct priv_data *priv = chip->vendor.priv;
-
- if (!chip->vendor.irq || priv->irq_tested)
- return tpm_tis_send_main(chip, buf, len);
-
- /* Verify receipt of the expected IRQ */
- irq = chip->vendor.irq;
- chip->vendor.irq = 0;
- rc = tpm_tis_send_main(chip, buf, len);
- chip->vendor.irq = irq;
- if (!priv->irq_tested)
- msleep(1);
- if (!priv->irq_tested)
- disable_interrupts(chip);
- priv->irq_tested = true;
- return rc;
}
-struct tis_vendor_timeout_override {
- u32 did_vid;
- unsigned long timeout_us[4];
-};
-
-static const struct tis_vendor_timeout_override vendor_timeout_overrides[] = {
- /* Atmel 3204 */
- { 0x32041114, { (TIS_SHORT_TIMEOUT*1000), (TIS_LONG_TIMEOUT*1000),
- (TIS_SHORT_TIMEOUT*1000), (TIS_SHORT_TIMEOUT*1000) } },
-};
-
-static bool tpm_tis_update_timeouts(struct tpm_chip *chip,
- unsigned long *timeout_cap)
+static int tpm_tcg_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
+ u8 *value)
{
- int i;
- u32 did_vid;
+ struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
- did_vid = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
-
- for (i = 0; i != ARRAY_SIZE(vendor_timeout_overrides); i++) {
- if (vendor_timeout_overrides[i].did_vid != did_vid)
- continue;
- memcpy(timeout_cap, vendor_timeout_overrides[i].timeout_us,
- sizeof(vendor_timeout_overrides[i].timeout_us));
- return true;
- }
-
- return false;
+ while (len--)
+ iowrite8(*value++, phy->iobase + addr);
+ return 0;
}
-/*
- * Early probing for iTPM with STS_DATA_EXPECT flaw.
- * Try sending command without itpm flag set and if that
- * fails, repeat with itpm flag set.
- */
-static int probe_itpm(struct tpm_chip *chip)
+static int tpm_tcg_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
{
- int rc = 0;
- u8 cmd_getticks[] = {
- 0x00, 0xc1, 0x00, 0x00, 0x00, 0x0a,
- 0x00, 0x00, 0x00, 0xf1
- };
- size_t len = sizeof(cmd_getticks);
- bool rem_itpm = itpm;
- u16 vendor = ioread16(chip->vendor.iobase + TPM_DID_VID(0));
-
- /* probe only iTPMS */
- if (vendor != TPM_VID_INTEL)
- return 0;
-
- itpm = false;
-
- rc = tpm_tis_send_data(chip, cmd_getticks, len);
- if (rc == 0)
- goto out;
-
- tpm_tis_ready(chip);
- release_locality(chip, chip->vendor.locality, 0);
+ struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
- itpm = true;
-
- rc = tpm_tis_send_data(chip, cmd_getticks, len);
- if (rc == 0) {
- dev_info(chip->pdev, "Detected an iTPM.\n");
- rc = 1;
- } else
- rc = -EFAULT;
-
-out:
- itpm = rem_itpm;
- tpm_tis_ready(chip);
- release_locality(chip, chip->vendor.locality, 0);
-
- return rc;
+ *result = ioread16(phy->iobase + addr);
+ return 0;
}
-static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status)
+static int tpm_tcg_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
{
- switch (chip->vendor.manufacturer_id) {
- case TPM_VID_WINBOND:
- return ((status == TPM_STS_VALID) ||
- (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY)));
- case TPM_VID_STM:
- return (status == (TPM_STS_VALID | TPM_STS_COMMAND_READY));
- default:
- return (status == TPM_STS_COMMAND_READY);
- }
-}
-
-static const struct tpm_class_ops tpm_tis = {
- .status = tpm_tis_status,
- .recv = tpm_tis_recv,
- .send = tpm_tis_send,
- .cancel = tpm_tis_ready,
- .update_timeouts = tpm_tis_update_timeouts,
- .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- .req_canceled = tpm_tis_req_canceled,
-};
+ struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
-static irqreturn_t tis_int_handler(int dummy, void *dev_id)
-{
- struct tpm_chip *chip = dev_id;
- u32 interrupt;
- int i;
-
- interrupt = ioread32(chip->vendor.iobase +
- TPM_INT_STATUS(chip->vendor.locality));
-
- if (interrupt == 0)
- return IRQ_NONE;
-
- ((struct priv_data *)chip->vendor.priv)->irq_tested = true;
- if (interrupt & TPM_INTF_DATA_AVAIL_INT)
- wake_up_interruptible(&chip->vendor.read_queue);
- if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
- for (i = 0; i < 5; i++)
- if (check_locality(chip, i) >= 0)
- break;
- if (interrupt &
- (TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
- TPM_INTF_CMD_READY_INT))
- wake_up_interruptible(&chip->vendor.int_queue);
-
- /* Clear interrupts handled with TPM_EOI */
- iowrite32(interrupt,
- chip->vendor.iobase +
- TPM_INT_STATUS(chip->vendor.locality));
- ioread32(chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
- return IRQ_HANDLED;
+ *result = ioread32(phy->iobase + addr);
+ return 0;
}
-/* Register the IRQ and issue a command that will cause an interrupt. If an
- * irq is seen then leave the chip setup for IRQ operation, otherwise reverse
- * everything and leave in polling mode. Returns 0 on success.
- */
-static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
- int flags, int irq)
+static int tpm_tcg_write32(struct tpm_tis_data *data, u32 addr, u32 value)
{
- struct priv_data *priv = chip->vendor.priv;
- u8 original_int_vec;
-
- if (devm_request_irq(chip->pdev, irq, tis_int_handler, flags,
- chip->devname, chip) != 0) {
- dev_info(chip->pdev, "Unable to request irq: %d for probe\n",
- irq);
- return -1;
- }
- chip->vendor.irq = irq;
-
- original_int_vec = ioread8(chip->vendor.iobase +
- TPM_INT_VECTOR(chip->vendor.locality));
- iowrite8(irq,
- chip->vendor.iobase + TPM_INT_VECTOR(chip->vendor.locality));
-
- /* Clear all existing */
- iowrite32(ioread32(chip->vendor.iobase +
- TPM_INT_STATUS(chip->vendor.locality)),
- chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
-
- /* Turn on */
- iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
- chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
-
- priv->irq_tested = false;
-
- /* Generate an interrupt by having the core call through to
- * tpm_tis_send
- */
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- tpm2_gen_interrupt(chip);
- else
- tpm_gen_interrupt(chip);
-
- /* tpm_tis_send will either confirm the interrupt is working or it
- * will call disable_irq which undoes all of the above.
- */
- if (!chip->vendor.irq) {
- iowrite8(original_int_vec,
- chip->vendor.iobase +
- TPM_INT_VECTOR(chip->vendor.locality));
- return 1;
- }
+ struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
+ iowrite32(value, phy->iobase + addr);
return 0;
}
-/* Try to find the IRQ the TPM is using. This is for legacy x86 systems that
- * do not have ACPI/etc. We typically expect the interrupt to be declared if
- * present.
- */
-static void tpm_tis_probe_irq(struct tpm_chip *chip, u32 intmask)
-{
- u8 original_int_vec;
- int i;
-
- original_int_vec = ioread8(chip->vendor.iobase +
- TPM_INT_VECTOR(chip->vendor.locality));
-
- if (!original_int_vec) {
- if (IS_ENABLED(CONFIG_X86))
- for (i = 3; i <= 15; i++)
- if (!tpm_tis_probe_irq_single(chip, intmask, 0,
- i))
- return;
- } else if (!tpm_tis_probe_irq_single(chip, intmask, 0,
- original_int_vec))
- return;
-}
-
-static bool interrupts = true;
-module_param(interrupts, bool, 0444);
-MODULE_PARM_DESC(interrupts, "Enable interrupts");
-
-static void tpm_tis_remove(struct tpm_chip *chip)
-{
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- tpm2_shutdown(chip, TPM2_SU_CLEAR);
-
- iowrite32(~TPM_GLOBAL_INT_ENABLE &
- ioread32(chip->vendor.iobase +
- TPM_INT_ENABLE(chip->vendor.
- locality)),
- chip->vendor.iobase +
- TPM_INT_ENABLE(chip->vendor.locality));
- release_locality(chip, chip->vendor.locality, 1);
-}
+static const struct tpm_tis_phy_ops tpm_tcg = {
+ .read_bytes = tpm_tcg_read_bytes,
+ .write_bytes = tpm_tcg_write_bytes,
+ .read16 = tpm_tcg_read16,
+ .read32 = tpm_tcg_read32,
+ .write32 = tpm_tcg_write32,
+};
static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
acpi_handle acpi_dev_handle)
{
- u32 vendor, intfcaps, intmask;
- int rc, probe;
- struct tpm_chip *chip;
- struct priv_data *priv;
+ struct tpm_tis_tcg_phy *phy;
+ int irq = -1;
- priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
- if (priv == NULL)
+ phy = devm_kzalloc(dev, sizeof(struct tpm_tis_tcg_phy), GFP_KERNEL);
+ if (phy == NULL)
return -ENOMEM;
- chip = tpmm_chip_alloc(dev, &tpm_tis);
- if (IS_ERR(chip))
- return PTR_ERR(chip);
-
- chip->vendor.priv = priv;
-#ifdef CONFIG_ACPI
- chip->acpi_dev_handle = acpi_dev_handle;
-#endif
+ phy->iobase = devm_ioremap_resource(dev, &tpm_info->res);
+ if (IS_ERR(phy->iobase))
+ return PTR_ERR(phy->iobase);
- chip->vendor.iobase = devm_ioremap_resource(dev, &tpm_info->res);
- if (IS_ERR(chip->vendor.iobase))
- return PTR_ERR(chip->vendor.iobase);
-
- /* Maximum timeouts */
- chip->vendor.timeout_a = TIS_TIMEOUT_A_MAX;
- chip->vendor.timeout_b = TIS_TIMEOUT_B_MAX;
- chip->vendor.timeout_c = TIS_TIMEOUT_C_MAX;
- chip->vendor.timeout_d = TIS_TIMEOUT_D_MAX;
-
- if (wait_startup(chip, 0) != 0) {
- rc = -ENODEV;
- goto out_err;
- }
-
- /* Take control of the TPM's interrupt hardware and shut it off */
- intmask = ioread32(chip->vendor.iobase +
- TPM_INT_ENABLE(chip->vendor.locality));
- intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
- TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
- intmask &= ~TPM_GLOBAL_INT_ENABLE;
- iowrite32(intmask,
- chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
-
- if (request_locality(chip, 0) != 0) {
- rc = -ENODEV;
- goto out_err;
- }
-
- rc = tpm2_probe(chip);
- if (rc)
- goto out_err;
-
- vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
- chip->vendor.manufacturer_id = vendor;
-
- dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
- (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
- vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
-
- if (!itpm) {
- probe = probe_itpm(chip);
- if (probe < 0) {
- rc = -ENODEV;
- goto out_err;
- }
- itpm = !!probe;
- }
+ if (interrupts)
+ irq = tpm_info->irq;
if (itpm)
- dev_info(dev, "Intel iTPM workaround enabled\n");
-
-
- /* Figure out the capabilities */
- intfcaps =
- ioread32(chip->vendor.iobase +
- TPM_INTF_CAPS(chip->vendor.locality));
- dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
- intfcaps);
- if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
- dev_dbg(dev, "\tBurst Count Static\n");
- if (intfcaps & TPM_INTF_CMD_READY_INT)
- dev_dbg(dev, "\tCommand Ready Int Support\n");
- if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
- dev_dbg(dev, "\tInterrupt Edge Falling\n");
- if (intfcaps & TPM_INTF_INT_EDGE_RISING)
- dev_dbg(dev, "\tInterrupt Edge Rising\n");
- if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
- dev_dbg(dev, "\tInterrupt Level Low\n");
- if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
- dev_dbg(dev, "\tInterrupt Level High\n");
- if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
- dev_dbg(dev, "\tLocality Change Int Support\n");
- if (intfcaps & TPM_INTF_STS_VALID_INT)
- dev_dbg(dev, "\tSts Valid Int Support\n");
- if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
- dev_dbg(dev, "\tData Avail Int Support\n");
-
- /* Very early on issue a command to the TPM in polling mode to make
- * sure it works. May as well use that command to set the proper
- * timeouts for the driver.
- */
- if (tpm_get_timeouts(chip)) {
- dev_err(dev, "Could not get TPM timeouts and durations\n");
- rc = -ENODEV;
- goto out_err;
- }
-
- /* INTERRUPT Setup */
- init_waitqueue_head(&chip->vendor.read_queue);
- init_waitqueue_head(&chip->vendor.int_queue);
- if (interrupts && tpm_info->irq != -1) {
- if (tpm_info->irq) {
- tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
- tpm_info->irq);
- if (!chip->vendor.irq)
- dev_err(chip->pdev, FW_BUG
- "TPM interrupt not working, polling instead\n");
- } else
- tpm_tis_probe_irq(chip, intmask);
- }
+ phy->priv.flags |= TPM_TIS_ITPM_POSSIBLE;
- if (chip->flags & TPM_CHIP_FLAG_TPM2) {
- rc = tpm2_do_selftest(chip);
- if (rc == TPM2_RC_INITIALIZE) {
- dev_warn(dev, "Firmware has not started TPM\n");
- rc = tpm2_startup(chip, TPM2_SU_CLEAR);
- if (!rc)
- rc = tpm2_do_selftest(chip);
- }
-
- if (rc) {
- dev_err(dev, "TPM self test failed\n");
- if (rc > 0)
- rc = -ENODEV;
- goto out_err;
- }
- } else {
- if (tpm_do_selftest(chip)) {
- dev_err(dev, "TPM self test failed\n");
- rc = -ENODEV;
- goto out_err;
- }
- }
-
- return tpm_chip_register(chip);
-out_err:
- tpm_tis_remove(chip);
- return rc;
+ return tpm_tis_core_init(dev, &phy->priv, irq, &tpm_tcg,
+ acpi_dev_handle);
}
-#ifdef CONFIG_PM_SLEEP
-static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
-{
- u32 intmask;
-
- /* reenable interrupts that device may have lost or
- BIOS/firmware may have disabled */
- iowrite8(chip->vendor.irq, chip->vendor.iobase +
- TPM_INT_VECTOR(chip->vendor.locality));
-
- intmask =
- ioread32(chip->vendor.iobase +
- TPM_INT_ENABLE(chip->vendor.locality));
-
- intmask |= TPM_INTF_CMD_READY_INT
- | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
- | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
-
- iowrite32(intmask,
- chip->vendor.iobase + TPM_INT_ENABLE(chip->vendor.locality));
-}
-
-static int tpm_tis_resume(struct device *dev)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
- int ret;
-
- if (chip->vendor.irq)
- tpm_tis_reenable_interrupts(chip);
-
- ret = tpm_pm_resume(dev);
- if (ret)
- return ret;
-
- /* TPM 1.2 requires self-test on resume. This function actually returns
- * an error code but for unknown reason it isn't handled.
- */
- if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
- tpm_do_selftest(chip);
-
- return 0;
-}
-#endif
-
static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
@@ -1058,12 +363,6 @@ static struct platform_driver tis_drv = {
},
};
-static bool force;
-#ifdef CONFIG_X86
-module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
-#endif
-
static int tpm_tis_force_device(void)
{
struct platform_device *pdev;