diff options
Diffstat (limited to 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c')
| -rw-r--r-- | drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 205 |
1 files changed, 174 insertions, 31 deletions
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 1e2cc9d68a05..5376328d3fd0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -22,21 +22,23 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <drm/drmP.h> #include <drm/amdgpu_drm.h> +#include <drm/drm_drv.h> #include <drm/drm_gem.h> +#include <drm/drm_vblank.h> #include "amdgpu_drv.h" #include <drm/drm_pciids.h> #include <linux/console.h> #include <linux/module.h> +#include <linux/pci.h> #include <linux/pm_runtime.h> #include <linux/vga_switcheroo.h> #include <drm/drm_probe_helper.h> #include "amdgpu.h" #include "amdgpu_irq.h" -#include "amdgpu_gem.h" +#include "amdgpu_dma_buf.h" #include "amdgpu_amdkfd.h" @@ -76,11 +78,14 @@ * - 3.30.0 - Add AMDGPU_SCHED_OP_CONTEXT_PRIORITY_OVERRIDE. * - 3.31.0 - Add support for per-flip tiling attribute changes with DC * - 3.32.0 - Add syncobj timeline support to AMDGPU_CS. + * - 3.33.0 - Fixes for GDS ENOMEM failures in AMDGPU_CS. */ #define KMS_DRIVER_MAJOR 3 -#define KMS_DRIVER_MINOR 32 +#define KMS_DRIVER_MINOR 33 #define KMS_DRIVER_PATCHLEVEL 0 +#define AMDGPU_MAX_TIMEOUT_PARAM_LENTH 256 + int amdgpu_vram_limit = 0; int amdgpu_vis_vram_limit = 0; int amdgpu_gart_size = -1; /* auto */ @@ -93,7 +98,7 @@ int amdgpu_disp_priority = 0; int amdgpu_hw_i2c = 0; int amdgpu_pcie_gen2 = -1; int amdgpu_msi = -1; -int amdgpu_lockup_timeout = 10000; +char amdgpu_lockup_timeout[AMDGPU_MAX_TIMEOUT_PARAM_LENTH]; int amdgpu_dpm = -1; int amdgpu_fw_load_type = -1; int amdgpu_aspm = -1; @@ -106,7 +111,6 @@ int amdgpu_vm_fragment_size = -1; int amdgpu_vm_block_size = -1; int amdgpu_vm_fault_stop = 0; int amdgpu_vm_debug = 0; -int amdgpu_vram_page_split = 512; int amdgpu_vm_update_mode = -1; int amdgpu_exp_hw_support = 0; int amdgpu_dc = -1; @@ -134,12 +138,17 @@ int amdgpu_emu_mode = 0; uint amdgpu_smu_memory_pool_size = 0; /* FBC (bit 0) disabled by default*/ uint amdgpu_dc_feature_mask = 0; +int amdgpu_async_gfx_ring = 1; +int amdgpu_mcbp = 0; +int amdgpu_discovery = -1; +int amdgpu_mes = 0; +int amdgpu_noretry; struct amdgpu_mgpu_info mgpu_info = { .mutex = __MUTEX_INITIALIZER(mgpu_info.mutex), }; int amdgpu_ras_enable = -1; -uint amdgpu_ras_mask = 0xffffffff; +uint amdgpu_ras_mask = 0xfffffffb; /** * DOC: vramlimit (int) @@ -227,16 +236,28 @@ MODULE_PARM_DESC(msi, "MSI support (1 = enable, 0 = disable, -1 = auto)"); module_param_named(msi, amdgpu_msi, int, 0444); /** - * DOC: lockup_timeout (int) - * Set GPU scheduler timeout value in ms. Value 0 is invalidated, will be adjusted to 10000. - * Negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET). The default is 10000. - */ -MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms > 0 (default 10000)"); -module_param_named(lockup_timeout, amdgpu_lockup_timeout, int, 0444); + * DOC: lockup_timeout (string) + * Set GPU scheduler timeout value in ms. + * + * The format can be [Non-Compute] or [GFX,Compute,SDMA,Video]. That is there can be one or + * multiple values specified. 0 and negative values are invalidated. They will be adjusted + * to default timeout. + * - With one value specified, the setting will apply to all non-compute jobs. + * - With multiple values specified, the first one will be for GFX. The second one is for Compute. + * And the third and fourth ones are for SDMA and Video. + * By default(with no lockup_timeout settings), the timeout for all non-compute(GFX, SDMA and Video) + * jobs is 10000. And there is no timeout enforced on compute jobs. + */ +MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms (default: 10000 for non-compute jobs and infinity timeout for compute jobs." + " 0: keep default value. negative: infinity timeout), " + "format is [Non-Compute] or [GFX,Compute,SDMA,Video]"); +module_param_string(lockup_timeout, amdgpu_lockup_timeout, sizeof(amdgpu_lockup_timeout), 0444); /** * DOC: dpm (int) - * Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto). + * Override for dynamic power management setting + * (0 = disable, 1 = enable, 2 = enable sw smu driver for vega20) + * The default is -1 (auto). */ MODULE_PARM_DESC(dpm, "DPM support (1 = enable, 0 = disable, -1 = auto)"); module_param_named(dpm, amdgpu_dpm, int, 0444); @@ -332,13 +353,6 @@ MODULE_PARM_DESC(vm_update_mode, "VM update using CPU (0 = never (default except module_param_named(vm_update_mode, amdgpu_vm_update_mode, int, 0444); /** - * DOC: vram_page_split (int) - * Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512. - */ -MODULE_PARM_DESC(vram_page_split, "Number of pages after we split VRAM allocations (default 512, -1 = disable)"); -module_param_named(vram_page_split, amdgpu_vram_page_split, int, 0444); - -/** * DOC: exp_hw_support (int) * Enable experimental hw support (1 = enable). The default is 0 (disabled). */ @@ -561,6 +575,44 @@ MODULE_PARM_DESC(smu_memory_pool_size, "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte"); module_param_named(smu_memory_pool_size, amdgpu_smu_memory_pool_size, uint, 0444); +/** + * DOC: async_gfx_ring (int) + * It is used to enable gfx rings that could be configured with different prioritites or equal priorities + */ +MODULE_PARM_DESC(async_gfx_ring, + "Asynchronous GFX rings that could be configured with either different priorities (HP3D ring and LP3D ring), or equal priorities (0 = disabled, 1 = enabled (default))"); +module_param_named(async_gfx_ring, amdgpu_async_gfx_ring, int, 0444); + +/** + * DOC: mcbp (int) + * It is used to enable mid command buffer preemption. (0 = disabled (default), 1 = enabled) + */ +MODULE_PARM_DESC(mcbp, + "Enable Mid-command buffer preemption (0 = disabled (default), 1 = enabled)"); +module_param_named(mcbp, amdgpu_mcbp, int, 0444); + +/** + * DOC: discovery (int) + * Allow driver to discover hardware IP information from IP Discovery table at the top of VRAM. + * (-1 = auto (default), 0 = disabled, 1 = enabled) + */ +MODULE_PARM_DESC(discovery, + "Allow driver to discover hardware IPs from IP Discovery table at the top of VRAM"); +module_param_named(discovery, amdgpu_discovery, int, 0444); + +/** + * DOC: mes (int) + * Enable Micro Engine Scheduler. This is a new hw scheduling engine for gfx, sdma, and compute. + * (0 = disabled (default), 1 = enabled) + */ +MODULE_PARM_DESC(mes, + "Enable Micro Engine Scheduler (0 = disabled (default), 1 = enabled)"); +module_param_named(mes, amdgpu_mes, int, 0444); + +MODULE_PARM_DESC(noretry, + "Disable retry faults (0 = retry enabled (default), 1 = retry disabled)"); +module_param_named(noretry, amdgpu_noretry, int, 0644); + #ifdef CONFIG_HSA_AMD /** * DOC: sched_policy (int) @@ -637,17 +689,6 @@ MODULE_PARM_DESC(ignore_crat, "Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)"); /** - * DOC: noretry (int) - * This parameter sets sh_mem_config.retry_disable. Default value, 0, enables retry. - * Setting 1 disables retry. - * Retry is needed for recoverable page faults. - */ -int noretry; -module_param(noretry, int, 0644); -MODULE_PARM_DESC(noretry, - "Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)"); - -/** * DOC: halt_if_hws_hang (int) * Halt if HWS hang is detected. Default value, 0, disables the halt on hang. * Setting 1 enables halt on hang. @@ -655,6 +696,24 @@ MODULE_PARM_DESC(noretry, int halt_if_hws_hang; module_param(halt_if_hws_hang, int, 0644); MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)"); + +/** + * DOC: hws_gws_support(bool) + * Whether HWS support gws barriers. Default value: false (not supported) + * This will be replaced with a MEC firmware version check once firmware + * is ready + */ +bool hws_gws_support; +module_param(hws_gws_support, bool, 0444); +MODULE_PARM_DESC(hws_gws_support, "MEC FW support gws barriers (false = not supported (Default), true = supported)"); + +/** + * DOC: queue_preemption_timeout_ms (int) + * queue preemption timeout in ms (1 = Minimum, 9000 = default) + */ +int queue_preemption_timeout_ms = 9000; +module_param(queue_preemption_timeout_ms, int, 0644); +MODULE_PARM_DESC(queue_preemption_timeout_ms, "queue preemption timeout in ms (1 = Minimum, 9000 = default)"); #endif /** @@ -665,6 +724,22 @@ MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (defau MODULE_PARM_DESC(dcfeaturemask, "all stable DC features enabled (default))"); module_param_named(dcfeaturemask, amdgpu_dc_feature_mask, uint, 0444); +/** + * DOC: abmlevel (uint) + * Override the default ABM (Adaptive Backlight Management) level used for DC + * enabled hardware. Requires DMCU to be supported and loaded. + * Valid levels are 0-4. A value of 0 indicates that ABM should be disabled by + * default. Values 1-4 control the maximum allowable brightness reduction via + * the ABM algorithm, with 1 being the least reduction and 4 being the most + * reduction. + * + * Defaults to 0, or disabled. Userspace can still override this level later + * after boot. + */ +uint amdgpu_dm_abm_level = 0; +MODULE_PARM_DESC(abmlevel, "ABM level (0 = off (default), 1-4 = backlight reduction level) "); +module_param_named(abmlevel, amdgpu_dm_abm_level, uint, 0444); + static const struct pci_device_id pciidlist[] = { #ifdef CONFIG_DRM_AMDGPU_SI {0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI}, @@ -921,6 +996,14 @@ static const struct pci_device_id pciidlist[] = { /* Raven */ {0x1002, 0x15dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RAVEN|AMD_IS_APU}, {0x1002, 0x15d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RAVEN|AMD_IS_APU}, + /* Navi10 */ + {0x1002, 0x7310, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, + {0x1002, 0x7312, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, + {0x1002, 0x7318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, + {0x1002, 0x7319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, + {0x1002, 0x731A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, + {0x1002, 0x731B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, + {0x1002, 0x731F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10}, {0, 0, 0} }; @@ -1216,6 +1299,66 @@ int amdgpu_file_to_fpriv(struct file *filp, struct amdgpu_fpriv **fpriv) return 0; } +int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev) +{ + char *input = amdgpu_lockup_timeout; + char *timeout_setting = NULL; + int index = 0; + long timeout; + int ret = 0; + + /* + * By default timeout for non compute jobs is 10000. + * And there is no timeout enforced on compute jobs. + */ + adev->gfx_timeout = msecs_to_jiffies(10000); + adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout; + adev->compute_timeout = MAX_SCHEDULE_TIMEOUT; + + if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENTH)) { + while ((timeout_setting = strsep(&input, ",")) && + strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENTH)) { + ret = kstrtol(timeout_setting, 0, &timeout); + if (ret) + return ret; + + if (timeout == 0) { + index++; + continue; + } else if (timeout < 0) { + timeout = MAX_SCHEDULE_TIMEOUT; + } else { + timeout = msecs_to_jiffies(timeout); + } + + switch (index++) { + case 0: + adev->gfx_timeout = timeout; + break; + case 1: + adev->compute_timeout = timeout; + break; + case 2: + adev->sdma_timeout = timeout; + break; + case 3: + adev->video_timeout = timeout; + break; + default: + break; + } + } + /* + * There is only one value specified and + * it should apply to all non-compute jobs. + */ + if (index == 1) + adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout; + } + + return ret; +} + static bool amdgpu_get_crtc_scanout_position(struct drm_device *dev, unsigned int pipe, bool in_vblank_irq, int *vpos, int *hpos, |