diff options
Diffstat (limited to 'drivers/hwmon/lm63.c')
| -rw-r--r-- | drivers/hwmon/lm63.c | 597 |
1 files changed, 597 insertions, 0 deletions
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c new file mode 100644 index 000000000000..7c6f9ea5a254 --- /dev/null +++ b/drivers/hwmon/lm63.c @@ -0,0 +1,597 @@ +/* + * lm63.c - driver for the National Semiconductor LM63 temperature sensor + * with integrated fan control + * Copyright (C) 2004-2005 Jean Delvare <khali@linux-fr.org> + * Based on the lm90 driver. + * + * The LM63 is a sensor chip made by National Semiconductor. It measures + * two temperatures (its own and one external one) and the speed of one + * fan, those speed it can additionally control. Complete datasheet can be + * obtained from National's website at: + * http://www.national.com/pf/LM/LM63.html + * + * The LM63 is basically an LM86 with fan speed monitoring and control + * capabilities added. It misses some of the LM86 features though: + * - No low limit for local temperature. + * - No critical limit for local temperature. + * - Critical limit for remote temperature can be changed only once. We + * will consider that the critical limit is read-only. + * + * The datasheet isn't very clear about what the tachometer reading is. + * I had a explanation from National Semiconductor though. The two lower + * bits of the read value have to be masked out. The value is still 16 bit + * in width. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/hwmon-sysfs.h> + +/* + * Addresses to scan + * Address is fully defined internally and cannot be changed. + */ + +static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(lm63); + +/* + * The LM63 registers + */ + +#define LM63_REG_CONFIG1 0x03 +#define LM63_REG_CONFIG2 0xBF +#define LM63_REG_CONFIG_FAN 0x4A + +#define LM63_REG_TACH_COUNT_MSB 0x47 +#define LM63_REG_TACH_COUNT_LSB 0x46 +#define LM63_REG_TACH_LIMIT_MSB 0x49 +#define LM63_REG_TACH_LIMIT_LSB 0x48 + +#define LM63_REG_PWM_VALUE 0x4C +#define LM63_REG_PWM_FREQ 0x4D + +#define LM63_REG_LOCAL_TEMP 0x00 +#define LM63_REG_LOCAL_HIGH 0x05 + +#define LM63_REG_REMOTE_TEMP_MSB 0x01 +#define LM63_REG_REMOTE_TEMP_LSB 0x10 +#define LM63_REG_REMOTE_OFFSET_MSB 0x11 +#define LM63_REG_REMOTE_OFFSET_LSB 0x12 +#define LM63_REG_REMOTE_HIGH_MSB 0x07 +#define LM63_REG_REMOTE_HIGH_LSB 0x13 +#define LM63_REG_REMOTE_LOW_MSB 0x08 +#define LM63_REG_REMOTE_LOW_LSB 0x14 +#define LM63_REG_REMOTE_TCRIT 0x19 +#define LM63_REG_REMOTE_TCRIT_HYST 0x21 + +#define LM63_REG_ALERT_STATUS 0x02 +#define LM63_REG_ALERT_MASK 0x16 + +#define LM63_REG_MAN_ID 0xFE +#define LM63_REG_CHIP_ID 0xFF + +/* + * Conversions and various macros + * For tachometer counts, the LM63 uses 16-bit values. + * For local temperature and high limit, remote critical limit and hysteresis + * value, it uses signed 8-bit values with LSB = 1 degree Celsius. + * For remote temperature, low and high limits, it uses signed 11-bit values + * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers. + */ + +#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \ + 5400000 / (reg)) +#define FAN_TO_REG(val) ((val) <= 82 ? 0xFFFC : \ + (5400000 / (val)) & 0xFFFC) +#define TEMP8_FROM_REG(reg) ((reg) * 1000) +#define TEMP8_TO_REG(val) ((val) <= -128000 ? -128 : \ + (val) >= 127000 ? 127 : \ + (val) < 0 ? ((val) - 500) / 1000 : \ + ((val) + 500) / 1000) +#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) +#define TEMP11_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ + (val) >= 127875 ? 0x7FE0 : \ + (val) < 0 ? ((val) - 62) / 125 * 32 : \ + ((val) + 62) / 125 * 32) +#define HYST_TO_REG(val) ((val) <= 0 ? 0 : \ + (val) >= 127000 ? 127 : \ + ((val) + 500) / 1000) + +/* + * Functions declaration + */ + +static int lm63_attach_adapter(struct i2c_adapter *adapter); +static int lm63_detach_client(struct i2c_client *client); + +static struct lm63_data *lm63_update_device(struct device *dev); + +static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); +static void lm63_init_client(struct i2c_client *client); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver lm63_driver = { + .owner = THIS_MODULE, + .name = "lm63", + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm63_attach_adapter, + .detach_client = lm63_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct lm63_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + u8 config, config_fan; + u16 fan[2]; /* 0: input + 1: low limit */ + u8 pwm1_freq; + u8 pwm1_value; + s8 temp8[3]; /* 0: local input + 1: local high limit + 2: remote critical limit */ + s16 temp11[3]; /* 0: remote input + 1: remote low limit + 2: remote high limit */ + u8 temp2_crit_hyst; + u8 alarms; +}; + +/* + * Sysfs callback functions and files + */ + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); +} + +static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->fan[1] = FAN_TO_REG(val); + i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, + data->fan[1] & 0xFF); + i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, + data->fan[1] >> 8); + up(&data->update_lock); + return count; +} + +static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ? + 255 : (data->pwm1_value * 255 + data->pwm1_freq) / + (2 * data->pwm1_freq)); +} + +static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + unsigned long val; + + if (!(data->config_fan & 0x20)) /* register is read-only */ + return -EPERM; + + val = simple_strtoul(buf, NULL, 10); + down(&data->update_lock); + data->pwm1_value = val <= 0 ? 0 : + val >= 255 ? 2 * data->pwm1_freq : + (val * data->pwm1_freq * 2 + 127) / 255; + i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value); + up(&data->update_lock); + return count; +} + +static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); +} + +static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); +} + +static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp8[1] = TEMP8_TO_REG(val); + i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]); + up(&data->update_lock); + return count; +} + +static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])); +} + +static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + static const u8 reg[4] = { + LM63_REG_REMOTE_LOW_MSB, + LM63_REG_REMOTE_LOW_LSB, + LM63_REG_REMOTE_HIGH_MSB, + LM63_REG_REMOTE_HIGH_LSB, + }; + + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + int nr = attr->index; + + down(&data->update_lock); + data->temp11[nr] = TEMP11_TO_REG(val); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], + data->temp11[nr] >> 8); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], + data->temp11[nr] & 0xff); + up(&data->update_lock); + return count; +} + +/* Hysteresis register holds a relative value, while we want to present + an absolute to user-space */ +static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2]) + - TEMP8_FROM_REG(data->temp2_crit_hyst)); +} + +/* And now the other way around, user-space provides an absolute + hysteresis value and we have to store a relative one */ +static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + long hyst; + + down(&data->update_lock); + hyst = TEMP8_FROM_REG(data->temp8[2]) - val; + i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, + HYST_TO_REG(hyst)); + up(&data->update_lock); + return count; +} + +static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, + set_fan, 1); + +static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1); +static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 1); + +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 1); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 2); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2); +static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, + set_temp2_crit_hyst); + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* + * Real code + */ + +static int lm63_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm63_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm63_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm63_data)); + + /* The common I2C client data is placed right before the + LM63-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm63_driver; + new_client->flags = 0; + + /* Default to an LM63 if forced */ + if (kind == 0) + kind = lm63; + + if (kind < 0) { /* must identify */ + u8 man_id, chip_id, reg_config1, reg_config2; + u8 reg_alert_status, reg_alert_mask; + + man_id = i2c_smbus_read_byte_data(new_client, + LM63_REG_MAN_ID); + chip_id = i2c_smbus_read_byte_data(new_client, + LM63_REG_CHIP_ID); + reg_config1 = i2c_smbus_read_byte_data(new_client, + LM63_REG_CONFIG1); + reg_config2 = i2c_smbus_read_byte_data(new_client, + LM63_REG_CONFIG2); + reg_alert_status = i2c_smbus_read_byte_data(new_client, + LM63_REG_ALERT_STATUS); + reg_alert_mask = i2c_smbus_read_byte_data(new_client, + LM63_REG_ALERT_MASK); + + if (man_id == 0x01 /* National Semiconductor */ + && chip_id == 0x41 /* LM63 */ + && (reg_config1 & 0x18) == 0x00 + && (reg_config2 & 0xF8) == 0x00 + && (reg_alert_status & 0x20) == 0x00 + && (reg_alert_mask & 0xA4) == 0xA4) { + kind = lm63; + } else { /* failed */ + dev_dbg(&adapter->dev, "Unsupported chip " + "(man_id=0x%02X, chip_id=0x%02X).\n", + man_id, chip_id); + goto exit_free; + } + } + + strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the LM63 chip */ + lm63_init_client(new_client); + + /* Register sysfs hooks */ + if (data->config & 0x04) { /* tachometer enabled */ + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_min.dev_attr); + } + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_crit.dev_attr); + device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); + device_create_file(&new_client->dev, &dev_attr_alarms); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +/* Idealy we shouldn't have to initialize anything, since the BIOS + should have taken care of everything */ +static void lm63_init_client(struct i2c_client *client) +{ + struct lm63_data *data = i2c_get_clientdata(client); + + data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); + data->config_fan = i2c_smbus_read_byte_data(client, + LM63_REG_CONFIG_FAN); + + /* Start converting if needed */ + if (data->config & 0x40) { /* standby */ + dev_dbg(&client->dev, "Switching to operational mode"); + data->config &= 0xA7; + i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, + data->config); + } + + /* We may need pwm1_freq before ever updating the client data */ + data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); + if (data->pwm1_freq == 0) + data->pwm1_freq = 1; + + /* Show some debug info about the LM63 configuration */ + dev_dbg(&client->dev, "Alert/tach pin configured for %s\n", + (data->config & 0x04) ? "tachometer input" : + "alert output"); + dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n", + (data->config_fan & 0x08) ? "1.4" : "360", + ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); + dev_dbg(&client->dev, "PWM output active %s, %s mode\n", + (data->config_fan & 0x10) ? "low" : "high", + (data->config_fan & 0x20) ? "manual" : "auto"); +} + +static int lm63_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct lm63_data *lm63_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + if (data->config & 0x04) { /* tachometer enabled */ + /* order matters for fan1_input */ + data->fan[0] = i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_LSB) & 0xFC; + data->fan[0] |= i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_MSB) << 8; + data->fan[1] = (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_LSB) & 0xFC) + | (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_MSB) << 8); + } + + data->pwm1_freq = i2c_smbus_read_byte_data(client, + LM63_REG_PWM_FREQ); + if (data->pwm1_freq == 0) + data->pwm1_freq = 1; + data->pwm1_value = i2c_smbus_read_byte_data(client, + LM63_REG_PWM_VALUE); + + data->temp8[0] = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_TEMP); + data->temp8[1] = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_HIGH); + + /* order matters for temp2_input */ + data->temp11[0] = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_MSB) << 8; + data->temp11[0] |= i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_LSB); + data->temp11[1] = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_LOW_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_LOW_LSB); + data->temp11[2] = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_LSB); + data->temp8[2] = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TCRIT); + data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TCRIT_HYST); + + data->alarms = i2c_smbus_read_byte_data(client, + LM63_REG_ALERT_STATUS) & 0x7F; + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm63_init(void) +{ + return i2c_add_driver(&lm63_driver); +} + +static void __exit sensors_lm63_exit(void) +{ + i2c_del_driver(&lm63_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("LM63 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm63_init); +module_exit(sensors_lm63_exit); |