diff options
Diffstat (limited to 'drivers/hwmon')
42 files changed, 1502 insertions, 1896 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 2e25b7a827d3..700e93adeb33 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -28,6 +28,17 @@ config HWMON_VID tristate default n +config HWMON_DEBUG_CHIP + bool "Hardware Monitoring Chip debugging messages" + default n + help + Say Y here if you want the I2C chip drivers to produce a bunch of + debug messages to the system log. Select this if you are having + a problem with I2C support and want to see more of what is going + on. + +comment "Native drivers" + config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" depends on X86 && EXPERIMENTAL @@ -248,18 +259,6 @@ config SENSORS_ASB100 This driver can also be built as a module. If so, the module will be called asb100. -config SENSORS_ATK0110 - tristate "ASUS ATK0110 ACPI hwmon" - depends on X86 && ACPI && EXPERIMENTAL - help - If you say yes here you get support for the ACPI hardware - monitoring interface found in many ASUS motherboards. This - driver will provide readings of fans, voltages and temperatures - through the system firmware. - - This driver can also be built as a module. If so, the module - will be called asus_atk0110. - config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on I2C && EXPERIMENTAL @@ -326,34 +325,6 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. -config SENSORS_FSCHER - tristate "FSC Hermes (DEPRECATED)" - depends on X86 && I2C - help - This driver is DEPRECATED please use the new merged fschmd - ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver - instead. - - If you say yes here you get support for Fujitsu Siemens - Computers Hermes sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscher. - -config SENSORS_FSCPOS - tristate "FSC Poseidon (DEPRECATED)" - depends on X86 && I2C - help - This driver is DEPRECATED please use the new merged fschmd - ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver - instead. - - If you say yes here you get support for Fujitsu Siemens - Computers Poseidon sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscpos. - config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C @@ -402,12 +373,12 @@ config SENSORS_GL520SM will be called gl520sm. config SENSORS_CORETEMP - tristate "Intel Core (2) Duo/Solo temperature sensor" + tristate "Intel Core/Core2/Atom temperature sensor" depends on X86 && EXPERIMENTAL help If you say yes here you get support for the temperature - sensor inside your CPU. Supported all are all known variants - of Intel Core family. + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check documentation/driver for details. config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" @@ -704,7 +675,7 @@ config SENSORS_SHT15 config SENSORS_S3C tristate "S3C24XX/S3C64XX Inbuilt ADC" - depends on ARCH_S3C2410 || ARCH_S3C64XX + depends on ARCH_S3C2410 help If you say yes here you get support for the on-board ADCs of the Samsung S3C24XX or S3C64XX series of SoC @@ -814,6 +785,16 @@ config SENSORS_TMP401 This driver can also be built as a module. If so, the module will be called tmp401. +config SENSORS_TMP421 + tristate "Texas Instruments TMP421 and compatible" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Texas Instruments TMP421, + TMP422 and TMP423 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp421. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI @@ -937,6 +918,27 @@ config SENSORS_W83627EHF This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_WM831X + tristate "WM831x PMICs" + depends on MFD_WM831X + help + If you say yes here you get support for the hardware + monitoring functionality of the Wolfson Microelectronics + WM831x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm831x-hwmon. + +config SENSORS_WM8350 + tristate "Wolfson Microelectronics WM835x" + depends on MFD_WM8350 + help + If you say yes here you get support for the hardware + monitoring features of the WM835x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm8350-hwmon. + config SENSORS_ULTRA45 tristate "Sun Ultra45 PIC16F747" depends on SPARC64 @@ -964,34 +966,6 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. -config SENSORS_LIS3LV02D - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" - depends on ACPI && INPUT - select INPUT_POLLDEV - select NEW_LEDS - select LEDS_CLASS - default n - help - This driver provides support for the LIS3LV02Dx accelerometer. In - particular, it can be found in a number of HP laptops, which have the - "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such - systems the driver should load automatically (via ACPI). The - accelerometer might also be found in other systems, connected via SPI - or I2C. The accelerometer data is readable via - /sys/devices/platform/lis3lv02d. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. On HP laptops, - if the led infrastructure is activated, support for a led indicating - disk protection will be provided as hp:red:hddprotection. - - This driver can also be built as modules. If so, the core module - will be called lis3lv02d and a specific module for HP laptops will be - called hp_accel. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of lis3lv02d. - config SENSORS_LIS3_SPI tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" depends on !ACPI && SPI_MASTER && INPUT @@ -1034,13 +1008,50 @@ config SENSORS_APPLESMC Say Y here if you have an applicable laptop and want to experience the awesome power of applesmc. -config HWMON_DEBUG_CHIP - bool "Hardware Monitoring Chip debugging messages" +if ACPI + +comment "ACPI drivers" + +config SENSORS_ATK0110 + tristate "ASUS ATK0110" + depends on X86 && EXPERIMENTAL + help + If you say yes here you get support for the ACPI hardware + monitoring interface found in many ASUS motherboards. This + driver will provide readings of fans, voltages and temperatures + through the system firmware. + + This driver can also be built as a module. If so, the module + will be called asus_atk0110. + +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on INPUT + select INPUT_POLLDEV + select NEW_LEDS + select LEDS_CLASS default n help - Say Y here if you want the I2C chip drivers to produce a bunch of - debug messages to the system log. Select this if you are having - a problem with I2C support and want to see more of what is going - on. + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. On HP laptops, + if the led infrastructure is activated, support for a led indicating + disk protection will be provided as hp:red:hddprotection. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for HP laptops will be + called hp_accel. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of lis3lv02d. + +endif # ACPI endif # HWMON diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 7f239a247c33..9f46cb019cc6 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -5,6 +5,10 @@ obj-$(CONFIG_HWMON) += hwmon.o obj-$(CONFIG_HWMON_VID) += hwmon-vid.o +# APCI drivers +obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o + +# Native drivers # asb100, then w83781d go first, as they can override other drivers' addresses. obj-$(CONFIG_SENSORS_ASB100) += asb100.o obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o @@ -29,10 +33,8 @@ obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o - obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_AMS) += ams/ -obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o @@ -40,9 +42,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_F71805F) += f71805f.o obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o obj-$(CONFIG_SENSORS_F75375S) += f75375s.o -obj-$(CONFIG_SENSORS_FSCHER) += fscher.o obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o -obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o obj-$(CONFIG_SENSORS_G760A) += g760a.o obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o @@ -84,12 +84,15 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o +obj-$(CONFIG_SENSORS_TMP421) += tmp421.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o +obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o +obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 4dbdb81ea3b1..03694cc17a32 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -32,7 +32,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/dmi.h> -#include <asm/io.h> +#include <linux/io.h> /* Banks */ #define ABIT_UGURU_ALARM_BANK 0x20 /* 1x 3 bytes */ diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index 7d3f15d32fdf..3cf28af614b5 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -34,7 +34,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/dmi.h> -#include <asm/io.h> +#include <linux/io.h> /* uGuru3 bank addresses */ #define ABIT_UGURU3_SETTINGS_BANK 0x01 @@ -117,9 +117,12 @@ struct abituguru3_sensor_info { int offset; }; +/* Avoid use of flexible array members */ +#define ABIT_UGURU3_MAX_DMI_NAMES 2 + struct abituguru3_motherboard_info { u16 id; - const char *dmi_name; + const char *dmi_name[ABIT_UGURU3_MAX_DMI_NAMES + 1]; /* + 1 -> end of sensors indicated by a sensor with name == NULL */ struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1]; }; @@ -164,7 +167,7 @@ struct abituguru3_data { /* Constants */ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { - { 0x000C, NULL /* Unknown, need DMI string */, { + { 0x000C, { NULL } /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -186,7 +189,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 35, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x000D, NULL /* Abit AW8, need DMI string */, { + { 0x000D, { NULL } /* Abit AW8, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -215,7 +218,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x000E, NULL /* AL-8, need DMI string */, { + { 0x000E, { NULL } /* AL-8, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -236,7 +239,8 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "SYS Fan", 34, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x000F, NULL /* Unknown, need DMI string */, { + { 0x000F, { NULL } /* Unknown, need DMI string */, { + { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -257,7 +261,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "SYS Fan", 34, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, { + { 0x0010, { NULL } /* Abit NI8 SLI GR, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -279,7 +283,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "OTES1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0011, "AT8 32X", { + { 0x0011, { "AT8 32X", NULL }, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 20, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -306,7 +310,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 37, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0012, NULL /* Abit AN8 32X, need DMI string */, { + { 0x0012, { NULL } /* Abit AN8 32X, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 20, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -328,7 +332,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0013, NULL /* Abit AW8D, need DMI string */, { + { 0x0013, { NULL } /* Abit AW8D, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -357,7 +361,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0014, "AB9", /* + AB9 Pro */ { + { 0x0014, { "AB9", "AB9 Pro", NULL }, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -378,7 +382,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "SYS Fan", 34, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0015, NULL /* Unknown, need DMI string */, { + { 0x0015, { NULL } /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 20, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -402,7 +406,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0016, "AW9D-MAX", { + { 0x0016, { "AW9D-MAX", NULL }, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -430,7 +434,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "OTES1 Fan", 38, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0017, NULL /* Unknown, need DMI string */, { + { 0x0017, { NULL } /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -455,7 +459,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 FAN", 37, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0018, "AB9 QuadGT", { + { 0x0018, { "AB9 QuadGT", NULL }, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -482,7 +486,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0019, "IN9 32X MAX", { + { 0x0019, { "IN9 32X MAX", NULL }, { { "CPU Core", 7, 0, 10, 1, 0 }, { "DDR2", 13, 0, 20, 1, 0 }, { "DDR2 VTT", 14, 0, 10, 1, 0 }, @@ -509,7 +513,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 FAN", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x001A, "IP35 Pro", { + { 0x001A, { "IP35 Pro", "IP35 Pro XE", NULL }, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -537,7 +541,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX4 Fan", 37, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x001B, NULL /* Unknown, need DMI string */, { + { 0x001B, { NULL } /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR3", 1, 0, 20, 1, 0 }, { "DDR3 VTT", 2, 0, 10, 1, 0 }, @@ -564,7 +568,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x001C, "IX38 QuadGT", { + { 0x001C, { "IX38 QuadGT", NULL }, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -591,7 +595,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0000, NULL, { { NULL, 0, 0, 0, 0, 0 } } } + { 0x0000, { NULL }, { { NULL, 0, 0, 0, 0, 0 } } } }; @@ -946,15 +950,6 @@ static int __devinit abituguru3_probe(struct platform_device *pdev) printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard " "ID: %04X\n", (unsigned int)id); -#ifdef CONFIG_DMI - if (!abituguru3_motherboards[i].dmi_name) { - printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was " - "not detected using DMI. Please send the output of " - "\"dmidecode\" to the abituguru3 maintainer " - "(see MAINTAINERS)\n"); - } -#endif - /* Fill the sysfs attr array */ sysfs_attr_i = 0; sysfs_filename = data->sysfs_names; @@ -1131,6 +1126,7 @@ static int __init abituguru3_dmi_detect(void) { const char *board_vendor, *board_name; int i, err = (force) ? 1 : -ENODEV; + const char *const *dmi_name; size_t sublen; board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); @@ -1151,17 +1147,17 @@ static int __init abituguru3_dmi_detect(void) sublen--; for (i = 0; abituguru3_motherboards[i].id; i++) { - const char *dmi_name = abituguru3_motherboards[i].dmi_name; - if (!dmi_name || strlen(dmi_name) != sublen) - continue; - if (!strncasecmp(board_name, dmi_name, sublen)) - break; + dmi_name = abituguru3_motherboards[i].dmi_name; + for ( ; *dmi_name; dmi_name++) { + if (strlen(*dmi_name) != sublen) + continue; + if (!strncasecmp(board_name, *dmi_name, sublen)) + return 0; + } } - if (!abituguru3_motherboards[i].id) - return 1; - - return 0; + /* No match found */ + return 1; } #else /* !CONFIG_DMI */ @@ -1221,6 +1217,13 @@ static int __init abituguru3_init(void) err = abituguru3_detect(); if (err) return err; + +#ifdef CONFIG_DMI + printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was " + "not detected using DMI. Please send the output of " + "\"dmidecode\" to the abituguru3 maintainer " + "(see MAINTAINERS)\n"); +#endif } err = platform_driver_register(&abituguru3_driver); diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c index 242294db3db6..5e9e095f1136 100644 --- a/drivers/hwmon/adcxx.c +++ b/drivers/hwmon/adcxx.c @@ -43,6 +43,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/mutex.h> +#include <linux/mod_devicetable.h> #include <linux/spi/spi.h> #define DRVNAME "adcxx" @@ -157,8 +158,9 @@ static struct sensor_device_attribute ad_input[] = { /*----------------------------------------------------------------------*/ -static int __devinit adcxx_probe(struct spi_device *spi, int channels) +static int __devinit adcxx_probe(struct spi_device *spi) { + int channels = spi_get_device_id(spi)->driver_data; struct adcxx *adc; int status; int i; @@ -204,26 +206,6 @@ out_err: return status; } -static int __devinit adcxx1s_probe(struct spi_device *spi) -{ - return adcxx_probe(spi, 1); -} - -static int __devinit adcxx2s_probe(struct spi_device *spi) -{ - return adcxx_probe(spi, 2); -} - -static int __devinit adcxx4s_probe(struct spi_device *spi) -{ - return adcxx_probe(spi, 4); -} - -static int __devinit adcxx8s_probe(struct spi_device *spi) -{ - return adcxx_probe(spi, 8); -} - static int __devexit adcxx_remove(struct spi_device *spi) { struct adcxx *adc = dev_get_drvdata(&spi->dev); @@ -241,79 +223,33 @@ static int __devexit adcxx_remove(struct spi_device *spi) return 0; } -static struct spi_driver adcxx1s_driver = { - .driver = { - .name = "adcxx1s", - .owner = THIS_MODULE, - }, - .probe = adcxx1s_probe, - .remove = __devexit_p(adcxx_remove), +static const struct spi_device_id adcxx_ids[] = { + { "adcxx1s", 1 }, + { "adcxx2s", 2 }, + { "adcxx4s", 4 }, + { "adcxx8s", 8 }, + { }, }; +MODULE_DEVICE_TABLE(spi, adcxx_ids); -static struct spi_driver adcxx2s_driver = { +static struct spi_driver adcxx_driver = { .driver = { - .name = "adcxx2s", + .name = "adcxx", .owner = THIS_MODULE, }, - .probe = adcxx2s_probe, - .remove = __devexit_p(adcxx_remove), -}; - -static struct spi_driver adcxx4s_driver = { - .driver = { - .name = "adcxx4s", - .owner = THIS_MODULE, - }, - .probe = adcxx4s_probe, - .remove = __devexit_p(adcxx_remove), -}; - -static struct spi_driver adcxx8s_driver = { - .driver = { - .name = "adcxx8s", - .owner = THIS_MODULE, - }, - .probe = adcxx8s_probe, + .id_table = adcxx_ids, + .probe = adcxx_probe, .remove = __devexit_p(adcxx_remove), }; static int __init init_adcxx(void) { - int status; - status = spi_register_driver(&adcxx1s_driver); - if (status) - goto reg_1_failed; - - status = spi_register_driver(&adcxx2s_driver); - if (status) - goto reg_2_failed; - - status = spi_register_driver(&adcxx4s_driver); - if (status) - goto reg_4_failed; - - status = spi_register_driver(&adcxx8s_driver); - if (status) - goto reg_8_failed; - - return status; - -reg_8_failed: - spi_unregister_driver(&adcxx4s_driver); -reg_4_failed: - spi_unregister_driver(&adcxx2s_driver); -reg_2_failed: - spi_unregister_driver(&adcxx1s_driver); -reg_1_failed: - return status; + return spi_register_driver(&adcxx_driver); } static void __exit exit_adcxx(void) { - spi_unregister_driver(&adcxx1s_driver); - spi_unregister_driver(&adcxx2s_driver); - spi_unregister_driver(&adcxx4s_driver); - spi_unregister_driver(&adcxx8s_driver); + spi_unregister_driver(&adcxx_driver); } module_init(init_adcxx); @@ -322,8 +258,3 @@ module_exit(exit_adcxx); MODULE_AUTHOR("Marc Pignat"); MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver"); MODULE_LICENSE("GPL"); - -MODULE_ALIAS("adcxx1s"); -MODULE_ALIAS("adcxx2s"); -MODULE_ALIAS("adcxx4s"); -MODULE_ALIAS("adcxx8s"); diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index b11e06f644b1..afc594318125 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -83,16 +83,14 @@ struct adm1021_data { struct mutex update_lock; char valid; /* !=0 if following fields are valid */ + char low_power; /* !=0 if device in low power mode */ unsigned long last_updated; /* In jiffies */ - s8 temp_max[2]; /* Register values */ - s8 temp_min[2]; - s8 temp[2]; + int temp_max[2]; /* Register values */ + int temp_min[2]; + int temp[2]; u8 alarms; /* Special values for ADM1023 only */ - u8 remote_temp_prec; - u8 remote_temp_os_prec; - u8 remote_temp_hyst_prec; u8 remote_temp_offset; u8 remote_temp_offset_prec; }; @@ -141,7 +139,7 @@ static ssize_t show_temp(struct device *dev, int index = to_sensor_dev_attr(devattr)->index; struct adm1021_data *data = adm1021_update_device(dev); - return sprintf(buf, "%d\n", 1000 * data->temp[index]); + return sprintf(buf, "%d\n", data->temp[index]); } static ssize_t show_temp_max(struct device *dev, @@ -150,7 +148,7 @@ static ssize_t show_temp_max(struct device *dev, int index = to_sensor_dev_attr(devattr)->index; struct adm1021_data *data = adm1021_update_device(dev); - return sprintf(buf, "%d\n", 1000 * data->temp_max[index]); + return sprintf(buf, "%d\n", data->temp_max[index]); } static ssize_t show_temp_min(struct device *dev, @@ -159,7 +157,7 @@ static ssize_t show_temp_min(struct device *dev, int index = to_sensor_dev_attr(devattr)->index; struct adm1021_data *data = adm1021_update_device(dev); - return sprintf(buf, "%d\n", 1000 * data->temp_min[index]); + return sprintf(buf, "%d\n", data->temp_min[index]); } static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, @@ -216,6 +214,35 @@ static ssize_t set_temp_min(struct device *dev, return count; } +static ssize_t show_low_power(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct adm1021_data *data = adm1021_update_device(dev); + return sprintf(buf, "%d\n", data->low_power); +} + +static ssize_t set_low_power(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1021_data *data = i2c_get_clientdata(client); + int low_power = simple_strtol(buf, NULL, 10) != 0; + + mutex_lock(&data->update_lock); + if (low_power != data->low_power) { + int config = i2c_smbus_read_byte_data( + client, ADM1021_REG_CONFIG_R); + data->low_power = low_power; + i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W, + (config & 0xBF) | (low_power << 6)); + } + mutex_unlock(&data->update_lock); + + return count; +} + + static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max, 0); @@ -233,6 +260,7 @@ static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +static DEVICE_ATTR(low_power, S_IWUSR | S_IRUGO, show_low_power, set_low_power); static struct attribute *adm1021_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, @@ -247,6 +275,7 @@ static struct attribute *adm1021_attributes[] = { &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &dev_attr_alarms.attr, + &dev_attr_low_power.attr, NULL }; @@ -412,25 +441,27 @@ static struct adm1021_data *adm1021_update_device(struct device *dev) dev_dbg(&client->dev, "Starting adm1021 update\n"); for (i = 0; i < 2; i++) { - data->temp[i] = i2c_smbus_read_byte_data(client, - ADM1021_REG_TEMP(i)); - data->temp_max[i] = i2c_smbus_read_byte_data(client, - ADM1021_REG_TOS_R(i)); - data->temp_min[i] = i2c_smbus_read_byte_data(client, - ADM1021_REG_THYST_R(i)); + data->temp[i] = 1000 * + (s8) i2c_smbus_read_byte_data( + client, ADM1021_REG_TEMP(i)); + data->temp_max[i] = 1000 * + (s8) i2c_smbus_read_byte_data( + client, ADM1021_REG_TOS_R(i)); + data->temp_min[i] = 1000 * + (s8) i2c_smbus_read_byte_data( + client, ADM1021_REG_THYST_R(i)); } data->alarms = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS) & 0x7c; if (data->type == adm1023) { - data->remote_temp_prec = - i2c_smbus_read_byte_data(client, - ADM1023_REG_REM_TEMP_PREC); - data->remote_temp_os_prec = - i2c_smbus_read_byte_data(client, - ADM1023_REG_REM_TOS_PREC); - data->remote_temp_hyst_prec = - i2c_smbus_read_byte_data(client, - ADM1023_REG_REM_THYST_PREC); + /* The ADM1023 provides 3 extra bits of precision for + * the remote sensor in extra registers. */ + data->temp[1] += 125 * (i2c_smbus_read_byte_data( + client, ADM1023_REG_REM_TEMP_PREC) >> 5); + data->temp_max[1] += 125 * (i2c_smbus_read_byte_data( + client, ADM1023_REG_REM_TOS_PREC) >> 5); + data->temp_min[1] += 125 * (i2c_smbus_read_byte_data( + client, ADM1023_REG_REM_THYST_PREC) >> 5); data->remote_temp_offset = i2c_smbus_read_byte_data(client, ADM1023_REG_REM_OFFSET); diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 789441830cd8..56905955352c 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -37,6 +37,7 @@ #define ADM1031_REG_PWM (0x22) #define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr)) +#define ADM1031_REG_TEMP_OFFSET(nr) (0x0d + (nr)) #define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4 * (nr)) #define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4 * (nr)) #define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4 * (nr)) @@ -93,6 +94,7 @@ struct adm1031_data { u8 auto_temp_min[3]; u8 auto_temp_off[3]; u8 auto_temp_max[3]; + s8 temp_offset[3]; s8 temp_min[3]; s8 temp_max[3]; s8 temp_crit[3]; @@ -145,6 +147,10 @@ adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value) #define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125) +#define TEMP_OFFSET_TO_REG(val) (TEMP_TO_REG(val) & 0x8f) +#define TEMP_OFFSET_FROM_REG(val) TEMP_FROM_REG((val) < 0 ? \ + (val) | 0x70 : (val)) + #define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0) static int FAN_TO_REG(int reg, int div) @@ -585,6 +591,14 @@ static ssize_t show_temp(struct device *dev, (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7)); return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext)); } +static ssize_t show_temp_offset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct adm1031_data *data = adm1031_update_device(dev); + return sprintf(buf, "%d\n", + TEMP_OFFSET_FROM_REG(data->temp_offset[nr])); +} static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, char *buf) { @@ -606,6 +620,24 @@ static ssize_t show_temp_crit(struct device *dev, struct adm1031_data *data = adm1031_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr])); } +static ssize_t set_temp_offset(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm1031_data *data = i2c_get_clientdata(client); + int nr = to_sensor_dev_attr(attr)->index; + int val; + + val = simple_strtol(buf, NULL, 10); + val = SENSORS_LIMIT(val, -15000, 15000); + mutex_lock(&data->update_lock); + data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val); + adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr), + data->temp_offset[nr]); + mutex_unlock(&data->update_lock); + return count; +} static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -661,6 +693,8 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, #define temp_reg(offset) \ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ show_temp, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \ + show_temp_offset, set_temp_offset, offset - 1); \ static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ show_temp_min, set_temp_min, offset - 1); \ static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ @@ -714,6 +748,7 @@ static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_auto_fan1_channel.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, @@ -721,6 +756,7 @@ static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, @@ -757,6 +793,7 @@ static struct attribute *adm1031_attributes_opt[] = { &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_auto_fan2_channel.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, @@ -937,6 +974,9 @@ static struct adm1031_data *adm1031_update_device(struct device *dev) } data->temp[chan] = newh; + data->temp_offset[chan] = + adm1031_read_value(client, + ADM1031_REG_TEMP_OFFSET(chan)); data->temp_min[chan] = adm1031_read_value(client, ADM1031_REG_TEMP_MIN(chan)); diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 678e34b01e52..7ea6a8f66056 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -35,7 +35,7 @@ #include <linux/dmi.h> #include <linux/mutex.h> #include <linux/hwmon-sysfs.h> -#include <asm/io.h> +#include <linux/io.h> #include <linux/leds.h> #include <linux/hwmon.h> #include <linux/workqueue.h> @@ -178,6 +178,8 @@ static const int debug; static struct platform_device *pdev; static s16 rest_x; static s16 rest_y; +static u8 backlight_state[2]; + static struct device *hwmon_dev; static struct input_polled_dev *applesmc_idev; @@ -497,17 +499,36 @@ static int applesmc_probe(struct platform_device *dev) return 0; } -static int applesmc_resume(struct platform_device *dev) +/* Synchronize device with memorized backlight state */ +static int applesmc_pm_resume(struct device *dev) { - return applesmc_device_init(); + mutex_lock(&applesmc_lock); + if (applesmc_light) + applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2); + mutex_unlock(&applesmc_lock); + return 0; } +/* Reinitialize device on resume from hibernation */ +static int applesmc_pm_restore(struct device *dev) +{ + int ret = applesmc_device_init(); + if (ret) + return ret; + return applesmc_pm_resume(dev); +} + +static struct dev_pm_ops applesmc_pm_ops = { + .resume = applesmc_pm_resume, + .restore = applesmc_pm_restore, +}; + static struct platform_driver applesmc_driver = { .probe = applesmc_probe, - .resume = applesmc_resume, .driver = { .name = "applesmc", .owner = THIS_MODULE, + .pm = &applesmc_pm_ops, }, }; @@ -804,17 +825,10 @@ static ssize_t applesmc_calibrate_store(struct device *dev, return count; } -/* Store the next backlight value to be written by the work */ -static unsigned int backlight_value; - static void applesmc_backlight_set(struct work_struct *work) { - u8 buffer[2]; - mutex_lock(&applesmc_lock); - buffer[0] = backlight_value; - buffer[1] = 0x00; - applesmc_write_key(BACKLIGHT_KEY, buffer, 2); + applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2); mutex_unlock(&applesmc_lock); } static DECLARE_WORK(backlight_work, &applesmc_backlight_set); @@ -824,7 +838,7 @@ static void applesmc_brightness_set(struct led_classdev *led_cdev, { int ret; - backlight_value = value; + backlight_state[0] = value; ret = queue_work(applesmc_led_wq, &backlight_work); if (debug && (!ret)) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index fe4fa29c9219..5a3ee00c0e7d 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -35,18 +35,22 @@ #define METHOD_OLD_ENUM_FAN "FSIF" #define ATK_MUX_HWMON 0x00000006ULL +#define ATK_MUX_MGMT 0x00000011ULL #define ATK_CLASS_MASK 0xff000000ULL #define ATK_CLASS_FREQ_CTL 0x03000000ULL #define ATK_CLASS_FAN_CTL 0x04000000ULL #define ATK_CLASS_HWMON 0x06000000ULL +#define ATK_CLASS_MGMT 0x11000000ULL #define ATK_TYPE_MASK 0x00ff0000ULL #define HWMON_TYPE_VOLT 0x00020000ULL #define HWMON_TYPE_TEMP 0x00030000ULL #define HWMON_TYPE_FAN 0x00040000ULL -#define HWMON_SENSOR_ID_MASK 0x0000ffffULL +#define ATK_ELEMENT_ID_MASK 0x0000ffffULL + +#define ATK_EC_ID 0x11060004ULL enum atk_pack_member { HWMON_PACK_FLAGS, @@ -89,6 +93,9 @@ struct atk_data { /* new inteface */ acpi_handle enumerate_handle; acpi_handle read_handle; + acpi_handle write_handle; + + bool disable_ec; int voltage_count; int temperature_count; @@ -129,9 +136,22 @@ struct atk_sensor_data { char const *acpi_name; }; -struct atk_acpi_buffer_u64 { - union acpi_object buf; - u64 value; +/* Return buffer format: + * [0-3] "value" is valid flag + * [4-7] value + * [8- ] unknown stuff on newer mobos + */ +struct atk_acpi_ret_buffer { + u32 flags; + u32 value; + u8 data[]; +}; + +/* Input buffer used for GITM and SITM methods */ +struct atk_acpi_input_buf { + u32 id; + u32 param1; + u32 param2; }; static int atk_add(struct acpi_device *device); @@ -439,52 +459,147 @@ static int atk_read_value_old(struct atk_sensor_data *sensor, u64 *value) return 0; } -static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value) +static union acpi_object *atk_ggrp(struct atk_data *data, u16 mux) { - struct atk_data *data = sensor->data; struct device *dev = &data->acpi_dev->dev; + struct acpi_buffer buf; + acpi_status ret; struct acpi_object_list params; - struct acpi_buffer ret; union acpi_object id; - struct atk_acpi_buffer_u64 tmp; - acpi_status status; + union acpi_object *pack; id.type = ACPI_TYPE_INTEGER; - id.integer.value = sensor->id; - + id.integer.value = mux; params.count = 1; params.pointer = &id; - tmp.buf.type = ACPI_TYPE_BUFFER; - tmp.buf.buffer.pointer = (u8 *)&tmp.value; - tmp.buf.buffer.length = sizeof(u64); - ret.length = sizeof(tmp); - ret.pointer = &tmp; + buf.length = ACPI_ALLOCATE_BUFFER; + ret = acpi_evaluate_object(data->enumerate_handle, NULL, ¶ms, &buf); + if (ret != AE_OK) { + dev_err(dev, "GGRP[%#x] ACPI exception: %s\n", mux, + acpi_format_exception(ret)); + return ERR_PTR(-EIO); + } + pack = buf.pointer; + if (pack->type != ACPI_TYPE_PACKAGE) { + /* Execution was successful, but the id was not found */ + ACPI_FREE(pack); + return ERR_PTR(-ENOENT); + } + + if (pack->package.count < 1) { + dev_err(dev, "GGRP[%#x] package is too small\n", mux); + ACPI_FREE(pack); + return ERR_PTR(-EIO); + } + return pack; +} + +static union acpi_object *atk_gitm(struct atk_data *data, u64 id) +{ + struct device *dev = &data->acpi_dev->dev; + struct atk_acpi_input_buf buf; + union acpi_object tmp; + struct acpi_object_list params; + struct acpi_buffer ret; + union acpi_object *obj; + acpi_status status; + + buf.id = id; + buf.param1 = 0; + buf.param2 = 0; + tmp.type = ACPI_TYPE_BUFFER; + tmp.buffer.pointer = (u8 *)&buf; + tmp.buffer.length = sizeof(buf); + + params.count = 1; + params.pointer = (void *)&tmp; + + ret.length = ACPI_ALLOCATE_BUFFER; status = acpi_evaluate_object_typed(data->read_handle, NULL, ¶ms, &ret, ACPI_TYPE_BUFFER); if (status != AE_OK) { - dev_warn(dev, "%s: ACPI exception: %s\n", __func__, + dev_warn(dev, "GITM[%#llx] ACPI exception: %s\n", id, acpi_format_exception(status)); - return -EIO; + return ERR_PTR(-EIO); + } + obj = ret.pointer; + + /* Sanity check */ + if (obj->buffer.length < 8) { + dev_warn(dev, "Unexpected ASBF length: %u\n", + obj->buffer.length); + ACPI_FREE(obj); + return ERR_PTR(-EIO); } + return obj; +} - /* Return buffer format: - * [0-3] "value" is valid flag - * [4-7] value - */ - if (!(tmp.value & 0xffffffff)) { +static union acpi_object *atk_sitm(struct atk_data *data, + struct atk_acpi_input_buf *buf) +{ + struct device *dev = &data->acpi_dev->dev; + struct acpi_object_list params; + union acpi_object tmp; + struct acpi_buffer ret; + union acpi_object *obj; + acpi_status status; + + tmp.type = ACPI_TYPE_BUFFER; + tmp.buffer.pointer = (u8 *)buf; + tmp.buffer.length = sizeof(*buf); + + params.count = 1; + params.pointer = &tmp; + + ret.length = ACPI_ALLOCATE_BUFFER; + status = acpi_evaluate_object_typed(data->write_handle, NULL, ¶ms, + &ret, ACPI_TYPE_BUFFER); + if (status != AE_OK) { + dev_warn(dev, "SITM[%#x] ACPI exception: %s\n", buf->id, + acpi_format_exception(status)); + return ERR_PTR(-EIO); + } + obj = ret.pointer; + + /* Sanity check */ + if (obj->buffer.length < 8) { + dev_warn(dev, "Unexpected ASBF length: %u\n", + obj->buffer.length); + ACPI_FREE(obj); + return ERR_PTR(-EIO); + } + return obj; +} + +static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value) +{ + struct atk_data *data = sensor->data; + struct device *dev = &data->acpi_dev->dev; + union acpi_object *obj; + struct atk_acpi_ret_buffer *buf; + int err = 0; + + obj = atk_gitm(data, sensor->id); + if (IS_ERR(obj)) + return PTR_ERR(obj); + + buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer; + if (buf->flags == 0) { /* The reading is not valid, possible causes: * - sensor failure * - enumeration was FUBAR (and we didn't notice) */ - dev_info(dev, "Failure: %#llx\n", tmp.value); - return -EIO; + dev_warn(dev, "Read failed, sensor = %#llx\n", sensor->id); + err = -EIO; + goto out; } - *value = (tmp.value & 0xffffffff00000000ULL) >> 32; - - return 0; + *value = buf->value; +out: + ACPI_FREE(obj); + return err; } static int atk_read_value(struct atk_sensor_data *sensor, u64 *value) @@ -713,43 +828,141 @@ cleanup: return ret; } -static int atk_enumerate_new_hwmon(struct atk_data *data) +static int atk_ec_present(struct atk_data *data) { struct device *dev = &data->acpi_dev->dev; - struct acpi_buffer buf; - acpi_status ret; - struct acpi_object_list params; - union acpi_object id; union acpi_object *pack; - int err; + union acpi_object *ec; + int ret; int i; - dev_dbg(dev, "Enumerating hwmon sensors\n"); + pack = atk_ggrp(data, ATK_MUX_MGMT); + if (IS_ERR(pack)) { + if (PTR_ERR(pack) == -ENOENT) { + /* The MGMT class does not exists - that's ok */ + dev_dbg(dev, "Class %#llx not found\n", ATK_MUX_MGMT); + return 0; + } + return PTR_ERR(pack); + } - id.type = ACPI_TYPE_INTEGER; - id.integer.value = ATK_MUX_HWMON; - params.count = 1; - params.pointer = &id; + /* Search the EC */ + ec = NULL; + for (i = 0; i < pack->package.count; i++) { + union acpi_object *obj = &pack->package.elements[i]; + union acpi_object *id; - buf.length = ACPI_ALLOCATE_BUFFER; - ret = acpi_evaluate_object_typed(data->enumerate_handle, NULL, ¶ms, - &buf, ACPI_TYPE_PACKAGE); - if (ret != AE_OK) { - dev_warn(dev, METHOD_ENUMERATE ": ACPI exception: %s\n", - acpi_format_exception(ret)); - return -ENODEV; + if (obj->type != ACPI_TYPE_PACKAGE) + continue; + + id = &obj->package.elements[0]; + if (id->type != ACPI_TYPE_INTEGER) + continue; + + if (id->integer.value == ATK_EC_ID) { + ec = obj; + break; + } } - /* Result must be a package */ - pack = buf.pointer; + ret = (ec != NULL); + if (!ret) + /* The system has no EC */ + dev_dbg(dev, "EC not found\n"); - if (pack->package.count < 1) { - dev_dbg(dev, "%s: hwmon package is too small: %d\n", __func__, - pack->package.count); - err = -EINVAL; - goto out; + ACPI_FREE(pack); + return ret; +} + +static int atk_ec_enabled(struct atk_data *data) +{ + struct device *dev = &data->acpi_dev->dev; + union acpi_object *obj; + struct atk_acpi_ret_buffer *buf; + int err; + + obj = atk_gitm(data, ATK_EC_ID); + if (IS_ERR(obj)) { + dev_err(dev, "Unable to query EC status\n"); + return PTR_ERR(obj); + } + buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer; + + if (buf->flags == 0) { + dev_err(dev, "Unable to query EC status\n"); + err = -EIO; + } else { + err = (buf->value != 0); + dev_dbg(dev, "EC is %sabled\n", + err ? "en" : "dis"); + } + + ACPI_FREE(obj); + return err; +} + +static int atk_ec_ctl(struct atk_data *data, int enable) +{ + struct device *dev = &data->acpi_dev->dev; + union acpi_object *obj; + struct atk_acpi_input_buf sitm; + struct atk_acpi_ret_buffer *ec_ret; + int err = 0; + + sitm.id = ATK_EC_ID; + sitm.param1 = enable; + sitm.param2 = 0; + + obj = atk_sitm(data, &sitm); + if (IS_ERR(obj)) { + dev_err(dev, "Failed to %sable the EC\n", + enable ? "en" : "dis"); + return PTR_ERR(obj); + } + ec_ret = (struct atk_acpi_ret_buffer *)obj->buffer.pointer; + if (ec_ret->flags == 0) { + dev_err(dev, "Failed to %sable the EC\n", + enable ? "en" : "dis"); + err = -EIO; + } else { + dev_info(dev, "EC %sabled\n", + enable ? "en" : "dis"); + } + + ACPI_FREE(obj); + return err; +} + +static int atk_enumerate_new_hwmon(struct atk_data *data) +{ + struct device *dev = &data->acpi_dev->dev; + union acpi_object *pack; + int err; + int i; + + err = atk_ec_present(data); + if (err < 0) + return err; + if (err) { + err = atk_ec_enabled(data); + if (err < 0) + return err; + /* If the EC was disabled we will disable it again on unload */ + data->disable_ec = err; + + err = atk_ec_ctl(data, 1); + if (err) { + data->disable_ec = false; + return err; + } } + dev_dbg(dev, "Enumerating hwmon sensors\n"); + + pack = atk_ggrp(data, ATK_MUX_HWMON); + if (IS_ERR(pack)) + return PTR_ERR(pack); + for (i = 0; i < pack->package.count; i++) { union acpi_object *obj = &pack->package.elements[i]; @@ -758,8 +971,7 @@ static int atk_enumerate_new_hwmon(struct atk_data *data) err = data->voltage_count + data->temperature_count + data->fan_count; -out: - ACPI_FREE(buf.pointer); + ACPI_FREE(pack); return err; } @@ -895,6 +1107,15 @@ static int atk_check_new_if(struct atk_data *data) } data->read_handle = ret; + /* De-multiplexer (write) */ + status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret); + if (status != AE_OK) { + dev_dbg(dev, "method " METHOD_READ " not found: %s\n", + acpi_format_exception(status)); + return -ENODEV; + } + data->write_handle = ret; + return 0; } @@ -915,6 +1136,7 @@ static int atk_add(struct acpi_device *device) data->acpi_dev = device; data->atk_handle = device->handle; INIT_LIST_HEAD(&data->sensor_list); + data->disable_ec = false; buf.length = ACPI_ALLOCATE_BUFFER; ret = acpi_evaluate_object_typed(data->atk_handle, BOARD_ID, NULL, @@ -973,6 +1195,8 @@ static int atk_add(struct acpi_device *device) cleanup: atk_free_sensors(data); out: + if (data->disable_ec) + atk_ec_ctl(data, 0); kfree(data); return err; } @@ -988,6 +1212,11 @@ static int atk_remove(struct acpi_device *device, int type) atk_free_sensors(data); hwmon_device_unregister(data->hwmon_dev); + if (data->disable_ec) { + if (atk_ec_ctl(data, 0)) + dev_err(&device->dev, "Failed to disable EC\n"); + } + kfree(data); return 0; diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 93c17223b527..caef39cda8c8 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -157,17 +157,26 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * /* The 100C is default for both mobile and non mobile CPUs */ int tjmax = 100000; - int ismobile = 1; + int tjmax_ee = 85000; + int usemsr_ee = 1; int err; u32 eax, edx; /* Early chips have no MSR for TjMax */ if ((c->x86_model == 0xf) && (c->x86_mask < 4)) { - ismobile = 0; + usemsr_ee = 0; } - if ((c->x86_model > 0xe) && (ismobile)) { + /* Atoms seems to have TjMax at 90C */ + + if (c->x86_model == 0x1c) { + usemsr_ee = 0; + tjmax = 90000; + } + + if ((c->x86_model > 0xe) && (usemsr_ee)) { + u8 platform_id; /* Now we can detect the mobile CPU using Intel provided table http://softwarecommunity.intel.com/Wiki/Mobility/720.htm @@ -179,13 +188,29 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * dev_warn(dev, "Unable to access MSR 0x17, assuming desktop" " CPU\n"); - ismobile = 0; - } else if (!(eax & 0x10000000)) { - ismobile = 0; + usemsr_ee = 0; + } else if (c->x86_model < 0x17 && !(eax & 0x10000000)) { + /* Trust bit 28 up to Penryn, I could not find any + documentation on that; if you happen to know + someone at Intel please ask */ + usemsr_ee = 0; + } else { + /* Platform ID bits 52:50 (EDX starts at bit 32) */ + platform_id = (edx >> 18) & 0x7; + + /* Mobile Penryn CPU seems to be platform ID 7 or 5 + (guesswork) */ + if ((c->x86_model == 0x17) && + ((platform_id == 5) || (platform_id == 7))) { + /* If MSR EE bit is set, set it to 90 degrees C, + otherwise 105 degrees C */ + tjmax_ee = 90000; + tjmax = 105000; + } } } - if (ismobile) { + if (usemsr_ee) { err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx); if (err) { @@ -193,9 +218,11 @@ static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device * "Unable to access MSR 0xEE, for Tjmax, left" " at default"); } else if (eax & 0x40000000) { - tjmax = 85000; + tjmax = tjmax_ee; } - } else { + /* if we dont use msr EE it means we are desktop CPU (with exeception + of Atom) */ + } else if (tjmax == 100000) { dev_warn(dev, "Using relative temperature scale!\n"); } @@ -248,9 +275,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); /* read the still undocumented IA32_TEMPERATURE_TARGET it exists - on older CPUs but not in this register */ + on older CPUs but not in this register, Atoms don't have it either */ - if (c->x86_model > 0xe) { + if ((c->x86_model > 0xe) && (c->x86_model != 0x1c)) { err = rdmsr_safe_on_cpu(data->id, 0x1a2, &eax, &edx); if (err) { dev_warn(&pdev->dev, "Unable to read" @@ -413,11 +440,15 @@ static int __init coretemp_init(void) for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); - /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */ + /* check if family 6, models 0xe (Pentium M DC), + 0xf (Core 2 DC 65nm), 0x16 (Core 2 SC 65nm), + 0x17 (Penryn 45nm), 0x1a (Nehalem), 0x1c (Atom), + 0x1e (Lynnfield) */ if ((c->cpuid_level < 0) || (c->x86 != 0x6) || !((c->x86_model == 0xe) || (c->x86_model == 0xf) || (c->x86_model == 0x16) || (c->x86_model == 0x17) || - (c->x86_model == 0x1A))) { + (c->x86_model == 0x1a) || (c->x86_model == 0x1c) || + (c->x86_model == 0x1e))) { /* supported CPU not found, but report the unknown family 6 CPU */ diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 3df202a9ad72..2c2cb1ec94c5 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -35,7 +35,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> /* ISA device, if found */ static struct platform_device *pdev; @@ -1134,7 +1134,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]); break; case SYS_PWM_ENABLE: - if (ix > 3) { + if (ix >= 3) { res = 1; /* pwm[5-6] hard-wired to manual mode */ } else { res = PWM_EN_FROM_REG(data->pwm_config[ix]); diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 899876579253..525a00bd70b1 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -40,7 +40,7 @@ #include <linux/sysfs.h> #include <linux/ioport.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> static unsigned short force_id; module_param(force_id, ushort, 0); diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c deleted file mode 100644 index 12c70e402cb2..000000000000 --- a/drivers/hwmon/fscher.c +++ /dev/null @@ -1,680 +0,0 @@ -/* - * fscher.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * fujitsu siemens hermes chip, - * module based on fscpos.c - * Copyright (C) 2000 Hermann Jung <hej@odn.de> - * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - * and Philip Edelbrock <phil@netroedge.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/hwmon.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/sysfs.h> - -/* - * Addresses to scan - */ - -static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; - -/* - * Insmod parameters - */ - -I2C_CLIENT_INSMOD_1(fscher); - -/* - * The FSCHER registers - */ - -/* chip identification */ -#define FSCHER_REG_IDENT_0 0x00 -#define FSCHER_REG_IDENT_1 0x01 -#define FSCHER_REG_IDENT_2 0x02 -#define FSCHER_REG_REVISION 0x03 - -/* global control and status */ -#define FSCHER_REG_EVENT_STATE 0x04 -#define FSCHER_REG_CONTROL 0x05 - -/* watchdog */ -#define FSCHER_REG_WDOG_PRESET 0x28 -#define FSCHER_REG_WDOG_STATE 0x23 -#define FSCHER_REG_WDOG_CONTROL 0x21 - -/* fan 0 */ -#define FSCHER_REG_FAN0_MIN 0x55 -#define FSCHER_REG_FAN0_ACT 0x0e -#define FSCHER_REG_FAN0_STATE 0x0d -#define FSCHER_REG_FAN0_RIPPLE 0x0f - -/* fan 1 */ -#define FSCHER_REG_FAN1_MIN 0x65 -#define FSCHER_REG_FAN1_ACT 0x6b -#define FSCHER_REG_FAN1_STATE 0x62 -#define FSCHER_REG_FAN1_RIPPLE 0x6f - -/* fan 2 */ -#define FSCHER_REG_FAN2_MIN 0xb5 -#define FSCHER_REG_FAN2_ACT 0xbb -#define FSCHER_REG_FAN2_STATE 0xb2 -#define FSCHER_REG_FAN2_RIPPLE 0xbf - -/* voltage supervision */ -#define FSCHER_REG_VOLT_12 0x45 -#define FSCHER_REG_VOLT_5 0x42 -#define FSCHER_REG_VOLT_BATT 0x48 - -/* temperature 0 */ -#define FSCHER_REG_TEMP0_ACT 0x64 -#define FSCHER_REG_TEMP0_STATE 0x71 - -/* temperature 1 */ -#define FSCHER_REG_TEMP1_ACT 0x32 -#define FSCHER_REG_TEMP1_STATE 0x81 - -/* temperature 2 */ -#define FSCHER_REG_TEMP2_ACT 0x35 -#define FSCHER_REG_TEMP2_STATE 0x91 - -/* - * Functions declaration - */ - -static int fscher_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int fscher_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info); -static int fscher_remove(struct i2c_client *client); -static struct fscher_data *fscher_update_device(struct device *dev); -static void fscher_init_client(struct i2c_client *client); - -static int fscher_read_value(struct i2c_client *client, u8 reg); -static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value); - -/* - * Driver data (common to all clients) - */ - -static const struct i2c_device_id fscher_id[] = { - { "fscher", fscher }, - { } -}; - -static struct i2c_driver fscher_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "fscher", - }, - .probe = fscher_probe, - .remove = fscher_remove, - .id_table = fscher_id, - .detect = fscher_detect, - .address_data = &addr_data, -}; - -/* - * Client data (each client gets its own) - */ - -struct fscher_data { - struct device *hwmon_dev; - struct mutex update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* register values */ - u8 revision; /* revision of chip */ - u8 global_event; /* global event status */ - u8 global_control; /* global control register */ - u8 watchdog[3]; /* watchdog */ - u8 volt[3]; /* 12, 5, battery voltage */ - u8 temp_act[3]; /* temperature */ - u8 temp_status[3]; /* status of sensor */ - u8 fan_act[3]; /* fans revolutions per second */ - u8 fan_status[3]; /* fan status */ - u8 fan_min[3]; /* fan min value for rps */ - u8 fan_ripple[3]; /* divider for rps */ -}; - -/* - * Sysfs stuff - */ - -#define sysfs_r(kind, sub, offset, reg) \ -static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \ -static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \ -static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct fscher_data *data = fscher_update_device(dev); \ - return show_##kind##sub(data, buf, (offset)); \ -} - -#define sysfs_w(kind, sub, offset, reg) \ -static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \ -static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \ -static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscher_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, (offset), reg); \ -} - -#define sysfs_rw_n(kind, sub, offset, reg) \ -sysfs_r(kind, sub, offset, reg) \ -sysfs_w(kind, sub, offset, reg) \ -static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub); - -#define sysfs_rw(kind, sub, reg) \ -sysfs_r(kind, sub, 0, reg) \ -sysfs_w(kind, sub, 0, reg) \ -static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub); - -#define sysfs_ro_n(kind, sub, offset, reg) \ -sysfs_r(kind, sub, offset, reg) \ -static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL); - -#define sysfs_ro(kind, sub, reg) \ -sysfs_r(kind, sub, 0, reg) \ -static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL); - -#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \ -sysfs_rw_n(pwm, , offset, reg_min) \ -sysfs_rw_n(fan, _status, offset, reg_status) \ -sysfs_rw_n(fan, _div , offset, reg_ripple) \ -sysfs_ro_n(fan, _input , offset, reg_act) - -#define sysfs_temp(offset, reg_status, reg_act) \ -sysfs_rw_n(temp, _status, offset, reg_status) \ -sysfs_ro_n(temp, _input , offset, reg_act) - -#define sysfs_in(offset, reg_act) \ -sysfs_ro_n(in, _input, offset, reg_act) - -#define sysfs_revision(reg_revision) \ -sysfs_ro(revision, , reg_revision) - -#define sysfs_alarms(reg_events) \ -sysfs_ro(alarms, , reg_events) - -#define sysfs_control(reg_control) \ -sysfs_rw(control, , reg_control) - -#define sysfs_watchdog(reg_control, reg_status, reg_preset) \ -sysfs_rw(watchdog, _control, reg_control) \ -sysfs_rw(watchdog, _status , reg_status) \ -sysfs_rw(watchdog, _preset , reg_preset) - -sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN, - FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT) -sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN, - FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT) -sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN, - FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT) - -sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT) -sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT) -sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT) - -sysfs_in(0, FSCHER_REG_VOLT_12) -sysfs_in(1, FSCHER_REG_VOLT_5) -sysfs_in(2, FSCHER_REG_VOLT_BATT) - -sysfs_revision(FSCHER_REG_REVISION) -sysfs_alarms(FSCHER_REG_EVENTS) -sysfs_control(FSCHER_REG_CONTROL) -sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET) - -static struct attribute *fscher_attributes[] = { - &dev_attr_revision.attr, - &dev_attr_alarms.attr, - &dev_attr_control.attr, - - &dev_attr_watchdog_status.attr, - &dev_attr_watchdog_control.attr, - &dev_attr_watchdog_preset.attr, - - &dev_attr_in0_input.attr, - &dev_attr_in1_input.attr, - &dev_attr_in2_input.attr, - - &dev_attr_fan1_status.attr, - &dev_attr_fan1_div.attr, - &dev_attr_fan1_input.attr, - &dev_attr_pwm1.attr, - &dev_attr_fan2_status.attr, - &dev_attr_fan2_div.attr, - &dev_attr_fan2_input.attr, - &dev_attr_pwm2.attr, - &dev_attr_fan3_status.attr, - &dev_attr_fan3_div.attr, - &dev_attr_fan3_input.attr, - &dev_attr_pwm3.attr, - - &dev_attr_temp1_status.attr, - &dev_attr_temp1_input.attr, - &dev_attr_temp2_status.attr, - &dev_attr_temp2_input.attr, - &dev_attr_temp3_status.attr, - &dev_attr_temp3_input.attr, - NULL -}; - -static const struct attribute_group fscher_group = { - .attrs = fscher_attributes, -}; - -/* - * Real code - */ - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int fscher_detect(struct i2c_client *new_client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = new_client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - /* Do the remaining detection unless force or force_fscher parameter */ - if (kind < 0) { - if ((i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_0) != 0x48) /* 'H' */ - || (i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_1) != 0x45) /* 'E' */ - || (i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */ - return -ENODEV; - } - - strlcpy(info->type, "fscher", I2C_NAME_SIZE); - - return 0; -} - -static int fscher_probe(struct i2c_client *new_client, - const struct i2c_device_id *id) -{ - struct fscher_data *data; - int err; - - data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - i2c_set_clientdata(new_client, data); - data->valid = 0; - mutex_init(&data->update_lock); - - fscher_init_client(new_client); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group))) - goto exit_free; - - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - -exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &fscher_group); -exit_free: - kfree(data); -exit: - return err; -} - -static int fscher_remove(struct i2c_client *client) -{ - struct fscher_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &fscher_group); - - kfree(data); - return 0; -} - -static int fscher_read_value(struct i2c_client *client, u8 reg) -{ - dev_dbg(&client->dev, "read reg 0x%02x\n", reg); - - return i2c_smbus_read_byte_data(client, reg); -} - -static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n", - reg, value); - - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new FSC Hermes. */ -static void fscher_init_client(struct i2c_client *client) -{ - struct fscher_data *data = i2c_get_clientdata(client); - - /* Read revision from chip */ - data->revision = fscher_read_value(client, FSCHER_REG_REVISION); -} - -static struct fscher_data *fscher_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct fscher_data *data = i2c_get_clientdata(client); - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - - dev_dbg(&client->dev, "Starting fscher update\n"); - - data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT); - data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT); - data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT); - data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE); - data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE); - data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE); - - data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12); - data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5); - data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT); - - data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT); - data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT); - data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT); - data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE); - data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE); - data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE); - data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN); - data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN); - data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN); - data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE); - data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE); - data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE); - - data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET); - data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE); - data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL); - - data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE); - data->global_control = fscher_read_value(client, - FSCHER_REG_CONTROL); - - data->last_updated = jiffies; - data->valid = 1; - } - - mutex_unlock(&data->update_lock); - - return data; -} - - - -#define FAN_INDEX_FROM_NUM(nr) ((nr) - 1) - -static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04; - - mutex_lock(&data->update_lock); - data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04); -} - -static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - - mutex_lock(&data->update_lock); - data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v; - fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]); -} - -static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); - - switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 2, 4 or 8!\n", v); - return -EINVAL; - } - - mutex_lock(&data->update_lock); - - /* bits 2..7 reserved => mask with 0x03 */ - data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03; - data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v; - - fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03)); -} - -#define RPM_FROM_REG(val) (val*60) - -static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)])); -} - - - -#define TEMP_INDEX_FROM_NUM(nr) ((nr) - 1) - -static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 2..7 reserved, 0 read only => mask with 0x02 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - mutex_lock(&data->update_lock); - data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03); -} - -#define TEMP_FROM_REG(val) (((val) - 128) * 1000) - -static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)])); -} - -/* - * The final conversion is specified in sensors.conf, as it depends on - * mainboard specific values. We export the registers contents as - * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much - * sense per se, but it minimizes the conversions count and keeps the - * values within a usual range. - */ -#define VOLT_FROM_REG(val) ((val) * 10) - -static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr])); -} - - - -static ssize_t show_revision(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->revision); -} - - - -static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2, 5..6 reserved => mask with 0x9b */ - return sprintf(buf, "%u\n", data->global_event & 0x9b); -} - - - -static ssize_t set_control(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 1..7 reserved => mask with 0x01 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01; - - mutex_lock(&data->update_lock); - data->global_control = v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_control(struct fscher_data *data, char *buf, int nr) -{ - /* bits 1..7 reserved => mask with 0x01 */ - return sprintf(buf, "%u\n", data->global_control & 0x01); -} - - - -static ssize_t set_watchdog_control(struct i2c_client *client, struct - fscher_data *data, const char *buf, size_t count, - int nr, int reg) -{ - /* bits 0..3 reserved => mask with 0xf0 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - - mutex_lock(&data->update_lock); - data->watchdog[2] &= ~0xf0; - data->watchdog[2] |= v; - fscher_write_value(client, reg, data->watchdog[2]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */ - return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0); -} - -static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - mutex_lock(&data->update_lock); - data->watchdog[1] &= ~v; - fscher_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - return sprintf(buf, "%u\n", data->watchdog[1] & 0x02); -} - -static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - - mutex_lock(&data->update_lock); - data->watchdog[0] = v; - fscher_write_value(client, reg, data->watchdog[0]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->watchdog[0]); -} - -static int __init sensors_fscher_init(void) -{ - return i2c_add_driver(&fscher_driver); -} - -static void __exit sensors_fscher_exit(void) -{ - i2c_del_driver(&fscher_driver); -} - -MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>"); -MODULE_DESCRIPTION("FSC Hermes driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_fscher_init); -module_exit(sensors_fscher_exit); diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index ea955edde87e..2a7a85a6dc36 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -915,7 +915,7 @@ static int watchdog_ioctl(struct inode *inode, struct file *filp, return ret; } -static struct file_operations watchdog_fops = { +static const struct file_operations watchdog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .open = watchdog_open, diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c deleted file mode 100644 index 8a7bcf500b4e..000000000000 --- a/drivers/hwmon/fscpos.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips - Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - fujitsu siemens poseidon chip, - module based on the old fscpos module by Hermann Jung <hej@odn.de> and - the fscher module by Reinhard Nissl <rnissl@gmx.de> - - original module based on lm80.c - Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - and Philip Edelbrock <phil@netroedge.com> - - Thanks to Jean Delvare for reviewing my code and suggesting a lot of - improvements. -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/hwmon.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/sysfs.h> - -/* - * Addresses to scan - */ -static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; - -/* - * Insmod parameters - */ -I2C_CLIENT_INSMOD_1(fscpos); - -/* - * The FSCPOS registers - */ - -/* chip identification */ -#define FSCPOS_REG_IDENT_0 0x00 -#define FSCPOS_REG_IDENT_1 0x01 -#define FSCPOS_REG_IDENT_2 0x02 -#define FSCPOS_REG_REVISION 0x03 - -/* global control and status */ -#define FSCPOS_REG_EVENT_STATE 0x04 -#define FSCPOS_REG_CONTROL 0x05 - -/* watchdog */ -#define FSCPOS_REG_WDOG_PRESET 0x28 -#define FSCPOS_REG_WDOG_STATE 0x23 -#define FSCPOS_REG_WDOG_CONTROL 0x21 - -/* voltages */ -#define FSCPOS_REG_VOLT_12 0x45 -#define FSCPOS_REG_VOLT_5 0x42 -#define FSCPOS_REG_VOLT_BATT 0x48 - -/* fans - the chip does not support minimum speed for fan2 */ -static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 }; -static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab }; -static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 }; -static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf }; - -/* temperatures */ -static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 }; -static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; - -/* - * Functions declaration - */ -static int fscpos_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int fscpos_detect(struct i2c_client *client, int kind, - struct i2c_board_info *info); -static int fscpos_remove(struct i2c_client *client); - -static int fscpos_read_value(struct i2c_client *client, u8 reg); -static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value); -static struct fscpos_data *fscpos_update_device(struct device *dev); -static void fscpos_init_client(struct i2c_client *client); - -static void reset_fan_alarm(struct i2c_client *client, int nr); - -/* - * Driver data (common to all clients) - */ -static const struct i2c_device_id fscpos_id[] = { - { "fscpos", fscpos }, - { } -}; - -static struct i2c_driver fscpos_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "fscpos", - }, - .probe = fscpos_probe, - .remove = fscpos_remove, - .id_table = fscpos_id, - .detect = fscpos_detect, - .address_data = &addr_data, -}; - -/* - * Client data (each client gets its own) - */ -struct fscpos_data { - struct device *hwmon_dev; - struct mutex update_lock; - char valid; /* 0 until following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - /* register values */ - u8 revision; /* revision of chip */ - u8 global_event; /* global event status */ - u8 global_control; /* global control register */ - u8 wdog_control; /* watchdog control */ - u8 wdog_state; /* watchdog status */ - u8 wdog_preset; /* watchdog preset */ - u8 volt[3]; /* 12, 5, battery current */ - u8 temp_act[3]; /* temperature */ - u8 temp_status[3]; /* status of sensor */ - u8 fan_act[3]; /* fans revolutions per second */ - u8 fan_status[3]; /* fan status */ - u8 pwm[2]; /* fan min value for rps */ - u8 fan_ripple[3]; /* divider for rps */ -}; - -/* Temperature */ -#define TEMP_FROM_REG(val) (((val) - 128) * 1000) - -static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1])); -} - -static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03); -} - -static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "1\n"); -} - -static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - if (v != 1) { - dev_err(&client->dev, "temp_reset value %ld not supported. " - "Use 1 to reset the alarm!\n", v); - return -EINVAL; - } - - dev_info(&client->dev, "You used the temp_reset feature which has not " - "been proplerly tested. Please report your " - "experience to the module author.\n"); - - /* Supported value: 2 (clears the status) */ - fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2); - return count; -} - -/* Fans */ -#define RPM_FROM_REG(val) ((val) * 60) - -static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04); -} - -static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1])); -} - -static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03); -} - -static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); - - switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; - default: - dev_err(&client->dev, "fan_ripple value %ld not supported. " - "Must be one of 2, 4 or 8!\n", v); - return -EINVAL; - } - - mutex_lock(&data->update_lock); - /* bits 2..7 reserved => mask with 0x03 */ - data->fan_ripple[nr - 1] &= ~0x03; - data->fan_ripple[nr - 1] |= v; - - fscpos_write_value(client, reg, data->fan_ripple[nr - 1]); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->pwm[nr - 1]); -} - -static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - - /* Range: 0..255 */ - if (v < 0) v = 0; - if (v > 255) v = 255; - - mutex_lock(&data->update_lock); - data->pwm[nr - 1] = v; - fscpos_write_value(client, reg, data->pwm[nr - 1]); - mutex_unlock(&data->update_lock); - return count; -} - -static void reset_fan_alarm(struct i2c_client *client, int nr) -{ - fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4); -} - -/* Volts */ -#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255) - -static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200)); -} - -static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600)); -} - -static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300)); -} - -/* Watchdog */ -static ssize_t show_wdog_control(struct fscpos_data *data, char *buf) -{ - /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */ - return sprintf(buf, "%u\n", data->wdog_control & 0xb0); -} - -static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - /* bits 0..3 reserved => mask with 0xf0 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - - mutex_lock(&data->update_lock); - data->wdog_control &= ~0xf0; - data->wdog_control |= v; - fscpos_write_value(client, reg, data->wdog_control); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_wdog_state(struct fscpos_data *data, char *buf) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - return sprintf(buf, "%u\n", data->wdog_state & 0x02); -} - -static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - /* Valid values: 2 (clear) */ - if (v != 2) { - dev_err(&client->dev, "wdog_state value %ld not supported. " - "Must be 2 to clear the state!\n", v); - return -EINVAL; - } - - mutex_lock(&data->update_lock); - data->wdog_state &= ~v; - fscpos_write_value(client, reg, v); - mutex_unlock(&data->update_lock); - return count; -} - -static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf) -{ - return sprintf(buf, "%u\n", data->wdog_preset); -} - -static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - - mutex_lock(&data->update_lock); - data->wdog_preset = v; - fscpos_write_value(client, reg, data->wdog_preset); - mutex_unlock(&data->update_lock); - return count; -} - -/* Event */ -static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf) -{ - /* bits 5..7 reserved => mask with 0x1f */ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", data->global_event & 0x9b); -} - -/* - * Sysfs stuff - */ -#define create_getter(kind, sub) \ - static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf); \ - } - -#define create_getter_n(kind, offset, sub) \ - static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\ - *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf, offset); \ - } - -#define create_setter(kind, sub, reg) \ - static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \ - *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, reg); \ - } - -#define create_setter_n(kind, offset, sub, reg) \ - static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, offset, reg);\ - } - -#define create_sysfs_device_ro(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \ - sysfs_show_##kind##offset##sub, NULL); - -#define create_sysfs_device_rw(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \ - sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub); - -#define sysfs_ro_n(kind, sub, offset) \ - create_getter_n(kind, offset, sub); \ - create_sysfs_device_ro(kind, sub, offset); - -#define sysfs_rw_n(kind, sub, offset, reg) \ - create_getter_n(kind, offset, sub); \ - create_setter_n(kind, offset, sub, reg); \ - create_sysfs_device_rw(kind, sub, offset); - -#define sysfs_rw(kind, sub, reg) \ - create_getter(kind, sub); \ - create_setter(kind, sub, reg); \ - create_sysfs_device_rw(kind, sub,); - -#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \ - sysfs_fan(offset, reg_status, reg_ripple); \ - sysfs_rw_n(pwm,, offset, reg_min); - -#define sysfs_fan(offset, reg_status, reg_ripple) \ - sysfs_ro_n(fan, _input, offset); \ - sysfs_ro_n(fan, _status, offset); \ - sysfs_rw_n(fan, _ripple, offset, reg_ripple); - -#define sysfs_temp(offset, reg_status) \ - sysfs_ro_n(temp, _input, offset); \ - sysfs_ro_n(temp, _status, offset); \ - sysfs_rw_n(temp, _reset, offset, reg_status); - -#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \ - sysfs_rw(wdog, _control, reg_wdog_control); \ - sysfs_rw(wdog, _preset, reg_wdog_preset); \ - sysfs_rw(wdog, _state, reg_wdog_state); - -sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0], - FSCPOS_REG_PWM[0]); -sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1], - FSCPOS_REG_PWM[1]); -sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]); - -sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]); -sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]); -sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]); - -sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE, - FSCPOS_REG_WDOG_CONTROL); - -static DEVICE_ATTR(event, S_IRUGO, show_event, NULL); -static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL); -static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL); -static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL); - -static struct attribute *fscpos_attributes[] = { - &dev_attr_event.attr, - &dev_attr_in0_input.attr, - &dev_attr_in1_input.attr, - &dev_attr_in2_input.attr, - - &dev_attr_wdog_control.attr, - &dev_attr_wdog_preset.attr, - &dev_attr_wdog_state.attr, - - &dev_attr_temp1_input.attr, - &dev_attr_temp1_status.attr, - &dev_attr_temp1_reset.attr, - &dev_attr_temp2_input.attr, - &dev_attr_temp2_status.attr, - &dev_attr_temp2_reset.attr, - &dev_attr_temp3_input.attr, - &dev_attr_temp3_status.attr, - &dev_attr_temp3_reset.attr, - - &dev_attr_fan1_input.attr, - &dev_attr_fan1_status.attr, - &dev_attr_fan1_ripple.attr, - &dev_attr_pwm1.attr, - &dev_attr_fan2_input.attr, - &dev_attr_fan2_status.attr, - &dev_attr_fan2_ripple.attr, - &dev_attr_pwm2.attr, - &dev_attr_fan3_input.attr, - &dev_attr_fan3_status.attr, - &dev_attr_fan3_ripple.attr, - NULL -}; - -static const struct attribute_group fscpos_group = { - .attrs = fscpos_attributes, -}; - -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int fscpos_detect(struct i2c_client *new_client, int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = new_client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - /* Do the remaining detection unless force or force_fscpos parameter */ - if (kind < 0) { - if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0) - != 0x50) /* 'P' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1) - != 0x45) /* 'E' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) - != 0x47))/* 'G' */ - return -ENODEV; - } - - strlcpy(info->type, "fscpos", I2C_NAME_SIZE); - - return 0; -} - -static int fscpos_probe(struct i2c_client *new_client, - const struct i2c_device_id *id) -{ - struct fscpos_data *data; - int err; - - data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - i2c_set_clientdata(new_client, data); - data->valid = 0; - mutex_init(&data->update_lock); - - /* Inizialize the fscpos chip */ - fscpos_init_client(new_client); - - /* Announce that the chip was found */ - dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group))) - goto exit_free; - - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - -exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &fscpos_group); -exit_free: - kfree(data); -exit: - return err; -} - -static int fscpos_remove(struct i2c_client *client) -{ - struct fscpos_data *data = i2c_get_clientdata(client); - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &fscpos_group); - - kfree(data); - return 0; -} - -static int fscpos_read_value(struct i2c_client *client, u8 reg) -{ - dev_dbg(&client->dev, "Read reg 0x%02x\n", reg); - return i2c_smbus_read_byte_data(client, reg); -} - -static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value); - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new FSCPOS chip */ -static void fscpos_init_client(struct i2c_client *client) -{ - struct fscpos_data *data = i2c_get_clientdata(client); - - /* read revision from chip */ - data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION); -} - -static struct fscpos_data *fscpos_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct fscpos_data *data = i2c_get_clientdata(client); - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - int i; - - dev_dbg(&client->dev, "Starting fscpos update\n"); - - for (i = 0; i < 3; i++) { - data->temp_act[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_ACT[i]); - data->temp_status[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_STATE[i]); - data->fan_act[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_ACT[i]); - data->fan_status[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_STATE[i]); - data->fan_ripple[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_RIPPLE[i]); - if (i < 2) { - /* fan2_min is not supported by the chip */ - data->pwm[i] = fscpos_read_value(client, - FSCPOS_REG_PWM[i]); - } - /* reset fan status if speed is back to > 0 */ - if (data->fan_status[i] != 0 && data->fan_act[i] > 0) { - reset_fan_alarm(client, i); - } - } - - data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12); - data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5); - data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT); - - data->wdog_preset = fscpos_read_value(client, - FSCPOS_REG_WDOG_PRESET); - data->wdog_state = fscpos_read_value(client, - FSCPOS_REG_WDOG_STATE); - data->wdog_control = fscpos_read_value(client, - FSCPOS_REG_WDOG_CONTROL); - - data->global_event = fscpos_read_value(client, - FSCPOS_REG_EVENT_STATE); - - data->last_updated = jiffies; - data->valid = 1; - } - mutex_unlock(&data->update_lock); - return data; -} - -static int __init sm_fscpos_init(void) -{ - return i2c_add_driver(&fscpos_driver); -} - -static void __exit sm_fscpos_exit(void) -{ - i2c_del_driver(&fscpos_driver); -} - -MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung " - "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>" - " and Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver"); -MODULE_LICENSE("GPL"); - -module_init(sm_fscpos_init); -module_exit(sm_fscpos_exit); diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index d3612a1f1981..be2d131e405c 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -35,8 +35,7 @@ #include <linux/timer.h> #include <linux/dmi.h> #include <linux/jiffies.h> - -#include <asm/io.h> +#include <linux/io.h> #define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */ #define HDAPS_NR_PORTS 0x30 /* number of ports: 0x1600 - 0x162f */ diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index bfc296145bba..bf0862a803c0 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -179,8 +179,14 @@ struct vrm_model { static struct vrm_model vrm_models[] = { {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */ {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24}, /* Athlon 64, Opteron */ - {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* NPT family 0Fh */ + /* In theory, all NPT family 0Fh processors have 6 VID pins and should + thus use vrm 25, however in practice not all mainboards route the + 6th VID pin because it is never needed. So we use the 5 VID pin + variant (vrm 24) for the models which exist today. */ + {X86_VENDOR_AMD, 0xF, 0x7F, ANY, 24}, /* NPT family 0Fh */ + {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* future fam. 0Fh */ {X86_VENDOR_AMD, 0x10, ANY, ANY, 25}, /* NPT family 10h */ + {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */ {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */ {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */ @@ -191,12 +197,14 @@ static struct vrm_model vrm_models[] = { {X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90}, /* P4 Willamette */ {X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90}, /* P4 Northwood */ {X86_VENDOR_INTEL, 0xF, ANY, ANY, 100}, /* Prescott and above assume VRD 10 */ + {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */ {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */ {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */ {X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */ {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */ + {X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */ }; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 9157247fed8e..ffeb2a10e1a7 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -50,7 +50,7 @@ #include <linux/string.h> #include <linux/dmi.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> #define DRVNAME "it87" diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 271338bdb6be..cf5afb9a10ab 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -454,6 +454,15 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) (p->click_thresh_y << 4)); } + if (p->wakeup_flags && (dev->whoami == LIS_SINGLE_ID)) { + dev->write(dev, FF_WU_CFG_1, p->wakeup_flags); + dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f); + /* default to 2.5ms for now */ + dev->write(dev, FF_WU_DURATION_1, 1); + /* enable high pass filter for both free-fall units */ + dev->write(dev, CTRL_REG2, HP_FF_WU1 | HP_FF_WU2); + } + if (p->irq_cfg) dev->write(dev, CTRL_REG3, p->irq_cfg); } diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index e320e2f511f1..3e1ff46f72d3 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -58,15 +58,17 @@ enum lis3_reg { OUTZ_L = 0x2C, OUTZ_H = 0x2D, OUTZ = 0x2D, - FF_WU_CFG = 0x30, - FF_WU_SRC = 0x31, - FF_WU_ACK = 0x32, - FF_WU_THS_L = 0x34, - FF_WU_THS_H = 0x35, - FF_WU_DURATION = 0x36, }; enum lis302d_reg { + FF_WU_CFG_1 = 0x30, + FF_WU_SRC_1 = 0x31, + FF_WU_THS_1 = 0x32, + FF_WU_DURATION_1 = 0x33, + FF_WU_CFG_2 = 0x34, + FF_WU_SRC_2 = 0x35, + FF_WU_THS_2 = 0x36, + FF_WU_DURATION_2 = 0x37, CLICK_CFG = 0x38, CLICK_SRC = 0x39, CLICK_THSY_X = 0x3B, @@ -77,6 +79,12 @@ enum lis302d_reg { }; enum lis3lv02d_reg { + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, DD_CFG = 0x38, DD_SRC = 0x39, DD_ACK = 0x3A, @@ -107,6 +115,10 @@ enum lis3lv02d_ctrl2 { CTRL2_FS = 0x80, /* Full Scale selection */ }; +enum lis302d_ctrl2 { + HP_FF_WU2 = 0x08, + HP_FF_WU1 = 0x04, +}; enum lis3lv02d_ctrl3 { CTRL3_CFS0 = 0x01, diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c index 3827ff04485f..82b16808a274 100644 --- a/drivers/hwmon/lis3lv02d_spi.c +++ b/drivers/hwmon/lis3lv02d_spi.c @@ -66,17 +66,16 @@ static int __devinit lis302dl_spi_probe(struct spi_device *spi) if (ret < 0) return ret; - lis3_dev.bus_priv = spi; - lis3_dev.init = lis3_spi_init; - lis3_dev.read = lis3_spi_read; - lis3_dev.write = lis3_spi_write; - lis3_dev.irq = spi->irq; - lis3_dev.ac = lis3lv02d_axis_normal; - lis3_dev.pdata = spi->dev.platform_data; + lis3_dev.bus_priv = spi; + lis3_dev.init = lis3_spi_init; + lis3_dev.read = lis3_spi_read; + lis3_dev.write = lis3_spi_write; + lis3_dev.irq = spi->irq; + lis3_dev.ac = lis3lv02d_axis_normal; + lis3_dev.pdata = spi->dev.platform_data; spi_set_drvdata(spi, &lis3_dev); - ret = lis3lv02d_init_device(&lis3_dev); - return ret; + return lis3lv02d_init_device(&lis3_dev); } static int __devexit lis302dl_spi_remove(struct spi_device *spi) @@ -84,9 +83,36 @@ static int __devexit lis302dl_spi_remove(struct spi_device *spi) struct lis3lv02d *lis3 = spi_get_drvdata(spi); lis3lv02d_joystick_disable(); lis3lv02d_poweroff(lis3); + + return lis3lv02d_remove_fs(&lis3_dev); +} + +#ifdef CONFIG_PM +static int lis3lv02d_spi_suspend(struct spi_device *spi, pm_message_t mesg) +{ + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(&lis3_dev); + + return 0; +} + +static int lis3lv02d_spi_resume(struct spi_device *spi) +{ + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweron(lis3); + return 0; } +#else +#define lis3lv02d_spi_suspend NULL +#define lis3lv02d_spi_resume NULL +#endif + static struct spi_driver lis302dl_spi_driver = { .driver = { .name = DRV_NAME, @@ -94,6 +120,8 @@ static struct spi_driver lis302dl_spi_driver = { }, .probe = lis302dl_spi_probe, .remove = __devexit_p(lis302dl_spi_remove), + .suspend = lis3lv02d_spi_suspend, + .resume = lis3lv02d_spi_resume, }; static int __init lis302dl_init(void) @@ -112,4 +140,4 @@ module_exit(lis302dl_exit); MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); MODULE_DESCRIPTION("lis3lv02d SPI glue layer"); MODULE_LICENSE("GPL"); - +MODULE_ALIAS("spi:" DRV_NAME); diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c index ae6204f33214..ab8a5d3c7690 100644 --- a/drivers/hwmon/lm70.c +++ b/drivers/hwmon/lm70.c @@ -32,6 +32,7 @@ #include <linux/sysfs.h> #include <linux/hwmon.h> #include <linux/mutex.h> +#include <linux/mod_devicetable.h> #include <linux/spi/spi.h> @@ -130,11 +131,20 @@ static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL); /*----------------------------------------------------------------------*/ -static int __devinit common_probe(struct spi_device *spi, int chip) +static int __devinit lm70_probe(struct spi_device *spi) { + int chip = spi_get_device_id(spi)->driver_data; struct lm70 *p_lm70; int status; + /* signaling is SPI_MODE_0 for both LM70 and TMP121 */ + if (spi->mode & (SPI_CPOL | SPI_CPHA)) + return -EINVAL; + + /* 3-wire link (shared SI/SO) for LM70 */ + if (chip == LM70_CHIP_LM70 && !(spi->mode & SPI_3WIRE)) + return -EINVAL; + /* NOTE: we assume 8-bit words, and convert to 16 bits manually */ p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL); @@ -170,24 +180,6 @@ out_dev_reg_failed: return status; } -static int __devinit lm70_probe(struct spi_device *spi) -{ - /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */ - if ((spi->mode & (SPI_CPOL | SPI_CPHA)) || !(spi->mode & SPI_3WIRE)) - return -EINVAL; - - return common_probe(spi, LM70_CHIP_LM70); -} - -static int __devinit tmp121_probe(struct spi_device *spi) -{ - /* signaling is SPI_MODE_0 with only MISO connected */ - if (spi->mode & (SPI_CPOL | SPI_CPHA)) - return -EINVAL; - - return common_probe(spi, LM70_CHIP_TMP121); -} - static int __devexit lm70_remove(struct spi_device *spi) { struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev); @@ -201,41 +193,32 @@ static int __devexit lm70_remove(struct spi_device *spi) return 0; } -static struct spi_driver tmp121_driver = { - .driver = { - .name = "tmp121", - .owner = THIS_MODULE, - }, - .probe = tmp121_probe, - .remove = __devexit_p(lm70_remove), + +static const struct spi_device_id lm70_ids[] = { + { "lm70", LM70_CHIP_LM70 }, + { "tmp121", LM70_CHIP_TMP121 }, + { }, }; +MODULE_DEVICE_TABLE(spi, lm70_ids); static struct spi_driver lm70_driver = { .driver = { .name = "lm70", .owner = THIS_MODULE, }, + .id_table = lm70_ids, .probe = lm70_probe, .remove = __devexit_p(lm70_remove), }; static int __init init_lm70(void) { - int ret = spi_register_driver(&lm70_driver); - if (ret) - return ret; - - ret = spi_register_driver(&tmp121_driver); - if (ret) - spi_unregister_driver(&lm70_driver); - - return ret; + return spi_register_driver(&lm70_driver); } static void __exit cleanup_lm70(void) { spi_unregister_driver(&lm70_driver); - spi_unregister_driver(&tmp121_driver); } module_init(init_lm70); diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index a1787fdf5b9f..f7e70163e016 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -31,7 +31,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <asm/io.h> +#include <linux/io.h> /* ISA device, if found */ static struct platform_device *pdev; diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index b251d8674b41..6c53d987de10 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -75,6 +75,8 @@ I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100, #define LM85_VERSTEP_GENERIC2 0x70 #define LM85_VERSTEP_LM85C 0x60 #define LM85_VERSTEP_LM85B 0x62 +#define LM85_VERSTEP_LM96000_1 0x68 +#define LM85_VERSTEP_LM96000_2 0x69 #define LM85_VERSTEP_ADM1027 0x60 #define LM85_VERSTEP_ADT7463 0x62 #define LM85_VERSTEP_ADT7463C 0x6A @@ -1133,6 +1135,26 @@ static void lm85_init_client(struct i2c_client *client) dev_warn(&client->dev, "Device is not ready\n"); } +static int lm85_is_fake(struct i2c_client *client) +{ + /* + * Differenciate between real LM96000 and Winbond WPCD377I. The latter + * emulate the former except that it has no hardware monitoring function + * so the readings are always 0. + */ + int i; + u8 in_temp, fan; + + for (i = 0; i < 8; i++) { + in_temp = i2c_smbus_read_byte_data(client, 0x20 + i); + fan = i2c_smbus_read_byte_data(client, 0x28 + i); + if (in_temp != 0x00 || fan != 0xff) + return 0; + } + + return 1; +} + /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm85_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) @@ -1173,6 +1195,16 @@ static int lm85_detect(struct i2c_client *client, int kind, case LM85_VERSTEP_LM85B: kind = lm85b; break; + case LM85_VERSTEP_LM96000_1: + case LM85_VERSTEP_LM96000_2: + /* Check for Winbond WPCD377I */ + if (lm85_is_fake(client)) { + dev_dbg(&adapter->dev, + "Found Winbond WPCD377I, " + "ignoring\n"); + return -ENODEV; + } + break; } } else if (company == LM85_COMPANY_ANALOG_DEV) { switch (verstep) { diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c index 9386e2a39211..00d975eb5b83 100644 --- a/drivers/hwmon/ltc4215.c +++ b/drivers/hwmon/ltc4215.c @@ -20,11 +20,6 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> -static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD_1(ltc4215); - /* Here are names of the chip's registers (a.k.a. commands) */ enum ltc4215_cmd { LTC4215_CONTROL = 0x00, /* rw */ @@ -246,9 +241,13 @@ static const struct attribute_group ltc4215_group = { static int ltc4215_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct i2c_adapter *adapter = client->adapter; struct ltc4215_data *data; int ret; + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) { ret = -ENOMEM; @@ -259,7 +258,7 @@ static int ltc4215_probe(struct i2c_client *client, mutex_init(&data->update_lock); /* Initialize the LTC4215 chip */ - /* TODO */ + i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00); /* Register sysfs hooks */ ret = sysfs_create_group(&client->dev.kobj, <c4215_group); @@ -294,56 +293,20 @@ static int ltc4215_remove(struct i2c_client *client) return 0; } -static int ltc4215_detect(struct i2c_client *client, - int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - if (kind < 0) { /* probed detection - check the chip type */ - s32 v; /* 8 bits from the chip, or -ERRNO */ - - /* - * Register 0x01 bit b7 is reserved, expect 0 - * Register 0x03 bit b6 and b7 are reserved, expect 0 - */ - v = i2c_smbus_read_byte_data(client, LTC4215_ALERT); - if (v < 0 || (v & (1 << 7)) != 0) - return -ENODEV; - - v = i2c_smbus_read_byte_data(client, LTC4215_FAULT); - if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0) - return -ENODEV; - } - - strlcpy(info->type, "ltc4215", I2C_NAME_SIZE); - dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n", - kind < 0 ? "probed" : "forced", - client->addr); - - return 0; -} - static const struct i2c_device_id ltc4215_id[] = { - { "ltc4215", ltc4215 }, + { "ltc4215", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ltc4215_id); /* This is the driver that will be inserted */ static struct i2c_driver ltc4215_driver = { - .class = I2C_CLASS_HWMON, .driver = { .name = "ltc4215", }, .probe = ltc4215_probe, .remove = ltc4215_remove, .id_table = ltc4215_id, - .detect = ltc4215_detect, - .address_data = &addr_data, }; static int __init ltc4215_init(void) diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c index 034b2c515848..65c232a9d0c5 100644 --- a/drivers/hwmon/ltc4245.c +++ b/drivers/hwmon/ltc4245.c @@ -22,15 +22,6 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> -/* Valid addresses are 0x20 - 0x3f - * - * For now, we do not probe, since some of these addresses - * are known to be unfriendly to probing */ -static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD_1(ltc4245); - /* Here are names of the chip's registers (a.k.a. commands) */ enum ltc4245_cmd { LTC4245_STATUS = 0x00, /* readonly */ @@ -369,9 +360,13 @@ static const struct attribute_group ltc4245_group = { static int ltc4245_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct i2c_adapter *adapter = client->adapter; struct ltc4245_data *data; int ret; + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) { ret = -ENOMEM; @@ -382,7 +377,8 @@ static int ltc4245_probe(struct i2c_client *client, mutex_init(&data->update_lock); /* Initialize the LTC4245 chip */ - /* TODO */ + i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00); + i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00); /* Register sysfs hooks */ ret = sysfs_create_group(&client->dev.kobj, <c4245_group); @@ -417,136 +413,20 @@ static int ltc4245_remove(struct i2c_client *client) return 0; } -/* Check that some bits in a control register appear at all possible - * locations without changing value - * - * @client: the i2c client to use - * @reg: the register to read - * @bits: the bits to check (0xff checks all bits, - * 0x03 checks only the last two bits) - * - * return -ERRNO if the register read failed - * return -ENODEV if the register value doesn't stay constant at all - * possible addresses - * - * return 0 for success - */ -static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits) -{ - int i; - s32 v, voff1, voff2; - - /* Read register and check for error */ - v = i2c_smbus_read_byte_data(client, reg); - if (v < 0) - return v; - - v &= bits; - - for (i = 0x00; i < 0xff; i += 0x20) { - - voff1 = i2c_smbus_read_byte_data(client, reg + i); - if (voff1 < 0) - return voff1; - - voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08); - if (voff2 < 0) - return voff2; - - voff1 &= bits; - voff2 &= bits; - - if (v != voff1 || v != voff2) - return -ENODEV; - } - - return 0; -} - -static int ltc4245_detect(struct i2c_client *client, - int kind, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = client->adapter; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - if (kind < 0) { /* probed detection - check the chip type */ - s32 v; /* 8 bits from the chip, or -ERRNO */ - - /* Chip registers 0x00-0x07 are control registers - * Chip registers 0x10-0x1f are data registers - * - * Address bits b7-b5 are ignored. This makes the chip "repeat" - * in steps of 0x20. Any control registers should appear with - * the same values across all duplicated addresses. - * - * Register 0x02 bit b2 is reserved, expect 0 - * Register 0x07 bits b7 to b4 are reserved, expect 0 - * - * Registers 0x01, 0x02 are control registers and should not - * change on their own. - * - * Register 0x06 bits b6 and b7 are control bits, and should - * not change on their own. - * - * Register 0x07 bits b3 to b0 are control bits, and should - * not change on their own. - */ - - /* read register 0x02 reserved bit, expect 0 */ - v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL); - if (v < 0 || (v & 0x04) != 0) - return -ENODEV; - - /* read register 0x07 reserved bits, expect 0 */ - v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR); - if (v < 0 || (v & 0xf0) != 0) - return -ENODEV; - - /* check that the alert register appears at all locations */ - if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff)) - return -ENODEV; - - /* check that the control register appears at all locations */ - if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff)) - return -ENODEV; - - /* check that register 0x06 bits b6 and b7 stay constant */ - if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0)) - return -ENODEV; - - /* check that register 0x07 bits b3-b0 stay constant */ - if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f)) - return -ENODEV; - } - - strlcpy(info->type, "ltc4245", I2C_NAME_SIZE); - dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n", - kind < 0 ? "probed" : "forced", - client->addr); - - return 0; -} - static const struct i2c_device_id ltc4245_id[] = { - { "ltc4245", ltc4245 }, + { "ltc4245", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ltc4245_id); /* This is the driver that will be inserted */ static struct i2c_driver ltc4245_driver = { - .class = I2C_CLASS_HWMON, .driver = { .name = "ltc4245", }, .probe = ltc4245_probe, .remove = ltc4245_remove, .id_table = ltc4245_id, - .detect = ltc4245_detect, - .address_data = &addr_data, }; static int __init ltc4245_init(void) diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c index bfaa665ccf32..9ac497271adf 100644 --- a/drivers/hwmon/max1111.c +++ b/drivers/hwmon/max1111.c @@ -242,3 +242,4 @@ module_exit(max1111_exit); MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); MODULE_DESCRIPTION("MAX1111 ADC Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:max1111"); diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index fb052fea3744..4a64b85d4ec9 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -44,7 +44,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> static u8 devid; static struct platform_device *pdev; diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c index 3a8a0f7a7736..3170b26d2443 100644 --- a/drivers/hwmon/pc87427.c +++ b/drivers/hwmon/pc87427.c @@ -33,7 +33,7 @@ #include <linux/sysfs.h> #include <linux/ioport.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> static unsigned short force_id; module_param(force_id, ushort, 0); @@ -435,7 +435,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev) /* This will need to be revisited when we add support for temperature and voltage monitoring. */ res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) { + if (!request_region(res->start, resource_size(res), DRVNAME)) { err = -EBUSY; dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n", (unsigned long)res->start, (unsigned long)res->end); @@ -475,7 +475,7 @@ exit_remove_files: sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]); } exit_release_region: - release_region(res->start, res->end - res->start + 1); + release_region(res->start, resource_size(res)); exit_kfree: platform_set_drvdata(pdev, NULL); kfree(data); @@ -500,7 +500,7 @@ static int __devexit pc87427_remove(struct platform_device *pdev) kfree(data); res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, res->end - res->start + 1); + release_region(res->start, resource_size(res)); return 0; } diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 6290a259456e..ebe38b680ee3 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -30,6 +30,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/mutex.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <linux/delay.h> #include <linux/jiffies.h> #include <linux/err.h> @@ -562,7 +563,7 @@ static int __devinit sht15_probe(struct platform_device *pdev) ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group); if (ret) { dev_err(&pdev->dev, "sysfs create failed"); - goto err_free_data; + goto err_release_gpio_data; } ret = request_irq(gpio_to_irq(data->pdata->gpio_data), @@ -581,10 +582,12 @@ static int __devinit sht15_probe(struct platform_device *pdev) data->hwmon_dev = hwmon_device_register(data->dev); if (IS_ERR(data->hwmon_dev)) { ret = PTR_ERR(data->hwmon_dev); - goto err_release_gpio_data; + goto err_release_irq; } return 0; +err_release_irq: + free_irq(gpio_to_irq(data->pdata->gpio_data), data); err_release_gpio_data: gpio_free(data->pdata->gpio_data); err_release_gpio_sck: @@ -620,7 +623,12 @@ static int __devexit sht15_remove(struct platform_device *pdev) } -static struct platform_driver sht_drivers[] = { +/* + * sht_drivers simultaneously refers to __devinit and __devexit function + * which causes spurious section mismatch warning. So use __refdata to + * get rid from this. + */ +static struct platform_driver __refdata sht_drivers[] = { { .driver = { .name = "sht10", diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index aa2e8318f167..12f2e7086560 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -63,7 +63,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> /* If force_addr is set to anything different from 0, we forcibly enable diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 6f6d52b4fb64..f46d936c12da 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -37,7 +37,7 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> static unsigned short force_id; module_param(force_id, ushort, 0); diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index ba75bfcf14ce..8ad50fdba00d 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -38,7 +38,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> static unsigned short force_id; module_param(force_id, ushort, 0); diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c new file mode 100644 index 000000000000..20924343431b --- /dev/null +++ b/drivers/hwmon/tmp421.c @@ -0,0 +1,347 @@ +/* tmp421.c + * + * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de> + * Preliminary support by: + * Melvin Rook, Raymond Ng + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Driver for the Texas Instruments TMP421 SMBus temperature sensor IC. + * Supported models: TMP421, TMP422, TMP423 + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f, + I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_3(tmp421, tmp422, tmp423); + +/* The TMP421 registers */ +#define TMP421_CONFIG_REG_1 0x09 +#define TMP421_CONVERSION_RATE_REG 0x0B +#define TMP421_MANUFACTURER_ID_REG 0xFE +#define TMP421_DEVICE_ID_REG 0xFF + +static const u8 TMP421_TEMP_MSB[4] = { 0x00, 0x01, 0x02, 0x03 }; +static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 }; + +/* Flags */ +#define TMP421_CONFIG_SHUTDOWN 0x40 +#define TMP421_CONFIG_RANGE 0x04 + +/* Manufacturer / Device ID's */ +#define TMP421_MANUFACTURER_ID 0x55 +#define TMP421_DEVICE_ID 0x21 +#define TMP422_DEVICE_ID 0x22 +#define TMP423_DEVICE_ID 0x23 + +static const struct i2c_device_id tmp421_id[] = { + { "tmp421", tmp421 }, + { "tmp422", tmp422 }, + { "tmp423", tmp423 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tmp421_id); + +struct tmp421_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; + unsigned long last_updated; + int kind; + u8 config; + s16 temp[4]; +}; + +static int temp_from_s16(s16 reg) +{ + int temp = reg; + + return (temp * 1000 + 128) / 256; +} + +static int temp_from_u16(u16 reg) +{ + int temp = reg; + + /* Add offset for extended temperature range. */ + temp -= 64 * 256; + + return (temp * 1000 + 128) / 256; +} + +static struct tmp421_data *tmp421_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct tmp421_data *data = i2c_get_clientdata(client); + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { + data->config = i2c_smbus_read_byte_data(client, + TMP421_CONFIG_REG_1); + + for (i = 0; i <= data->kind; i++) { + data->temp[i] = i2c_smbus_read_byte_data(client, + TMP421_TEMP_MSB[i]) << 8; + data->temp[i] |= i2c_smbus_read_byte_data(client, + TMP421_TEMP_LSB[i]); + } + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static ssize_t show_temp_value(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct tmp421_data *data = tmp421_update_device(dev); + int temp; + + mutex_lock(&data->update_lock); + if (data->config & TMP421_CONFIG_RANGE) + temp = temp_from_u16(data->temp[index]); + else + temp = temp_from_s16(data->temp[index]); + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", temp); +} + +static ssize_t show_fault(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct tmp421_data *data = tmp421_update_device(dev); + + /* + * The OPEN bit signals a fault. This is bit 0 of the temperature + * register (low byte). + */ + if (data->temp[index] & 0x01) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a, + int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct tmp421_data *data = dev_get_drvdata(dev); + struct device_attribute *devattr; + unsigned int index; + + devattr = container_of(a, struct device_attribute, attr); + index = to_sensor_dev_attr(devattr)->index; + + if (data->kind > index) + return a->mode; + + return 0; +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2); +static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3); +static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3); + +static struct attribute *tmp421_attr[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp4_fault.dev_attr.attr, + NULL +}; + +static const struct attribute_group tmp421_group = { + .attrs = tmp421_attr, + .is_visible = tmp421_is_visible, +}; + +static int tmp421_init_client(struct i2c_client *client) +{ + int config, config_orig; + + /* Set the conversion rate to 2 Hz */ + i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05); + + /* Start conversions (disable shutdown if necessary) */ + config = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1); + if (config < 0) { + dev_err(&client->dev, "Could not read configuration" + " register (%d)\n", config); + return -ENODEV; + } + + config_orig = config; + config &= ~TMP421_CONFIG_SHUTDOWN; + + if (config != config_orig) { + dev_info(&client->dev, "Enable monitoring chip\n"); + i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config); + } + + return 0; +} + +static int tmp421_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + const char *names[] = { "TMP421", "TMP422", "TMP423" }; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + u8 reg; + + reg = i2c_smbus_read_byte_data(client, + TMP421_MANUFACTURER_ID_REG); + if (reg != TMP421_MANUFACTURER_ID) + return -ENODEV; + + reg = i2c_smbus_read_byte_data(client, + TMP421_DEVICE_ID_REG); + switch (reg) { + case TMP421_DEVICE_ID: + kind = tmp421; + break; + case TMP422_DEVICE_ID: + kind = tmp422; + break; + case TMP423_DEVICE_ID: + kind = tmp423; + break; + default: + return -ENODEV; + } + } + strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE); + dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n", + names[kind - 1], client->addr); + + return 0; +} + +static int tmp421_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tmp421_data *data; + int err; + + data = kzalloc(sizeof(struct tmp421_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->kind = id->driver_data; + + err = tmp421_init_client(client); + if (err) + goto exit_free; + + err = sysfs_create_group(&client->dev.kobj, &tmp421_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + data->hwmon_dev = NULL; + goto exit_remove; + } + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &tmp421_group); + +exit_free: + i2c_set_clientdata(client, NULL); + kfree(data); + + return err; +} + +static int tmp421_remove(struct i2c_client *client) +{ + struct tmp421_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &tmp421_group); + + i2c_set_clientdata(client, NULL); + kfree(data); + + return 0; +} + +static struct i2c_driver tmp421_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "tmp421", + }, + .probe = tmp421_probe, + .remove = tmp421_remove, + .id_table = tmp421_id, + .detect = tmp421_detect, + .address_data = &addr_data, +}; + +static int __init tmp421_init(void) +{ + return i2c_add_driver(&tmp421_driver); +} + +static void __exit tmp421_exit(void) +{ + i2c_del_driver(&tmp421_driver); +} + +MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>"); +MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor" + " driver"); +MODULE_LICENSE("GPL"); + +module_init(tmp421_init); +module_exit(tmp421_exit); diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index a022aedcaacb..39e82a492f26 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -42,7 +42,7 @@ #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> /* If force_addr is set to anything different from 0, we forcibly enable diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index 73f77a9b8b18..ae33bbb577c7 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -33,7 +33,7 @@ #include <linux/mutex.h> #include <linux/ioport.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> static int uch_config = -1; module_param(uch_config, int, 0); @@ -1136,7 +1136,7 @@ static int __devinit vt1211_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) { + if (!request_region(res->start, resource_size(res), DRVNAME)) { err = -EBUSY; dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", (unsigned long)res->start, (unsigned long)res->end); @@ -1209,7 +1209,7 @@ EXIT_DEV_REMOVE: dev_err(dev, "Sysfs interface creation failed (%d)\n", err); EXIT_DEV_REMOVE_SILENT: vt1211_remove_sysfs(pdev); - release_region(res->start, res->end - res->start + 1); + release_region(res->start, resource_size(res)); EXIT_KFREE: platform_set_drvdata(pdev, NULL); kfree(data); @@ -1228,7 +1228,7 @@ static int __devexit vt1211_remove(struct platform_device *pdev) kfree(data); res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, res->end - res->start + 1); + release_region(res->start, resource_size(res)); return 0; } diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 9982b45fbb14..470a1226ba2b 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -36,7 +36,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> static int force_addr; module_param(force_addr, int, 0); diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 0e9746913d2b..bb5e78748783 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -51,7 +51,7 @@ #include <linux/err.h> #include <linux/mutex.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> #include "lm75.h" enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg }; diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 389150ba30d3..2be28ac4ede0 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -51,7 +51,7 @@ #include <linux/mutex.h> #include <linux/ioport.h> #include <linux/acpi.h> -#include <asm/io.h> +#include <linux/io.h> #include "lm75.h" static struct platform_device *pdev; diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 0bdab959b736..d27ed1bac002 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -48,7 +48,7 @@ #ifdef CONFIG_ISA #include <linux/platform_device.h> #include <linux/ioport.h> -#include <asm/io.h> +#include <linux/io.h> #endif #include "lm75.h" diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c new file mode 100644 index 000000000000..c16e9e74c356 --- /dev/null +++ b/drivers/hwmon/wm831x-hwmon.c @@ -0,0 +1,226 @@ +/* + * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/auxadc.h> + +struct wm831x_hwmon { + struct wm831x *wm831x; + struct device *classdev; +}; + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm831x\n"); +} + +static const char *input_names[] = { + [WM831X_AUX_SYSVDD] = "SYSVDD", + [WM831X_AUX_USB] = "USB", + [WM831X_AUX_BKUP_BATT] = "Backup battery", + [WM831X_AUX_BATT] = "Battery", + [WM831X_AUX_WALL] = "WALL", + [WM831X_AUX_CHIP_TEMP] = "PMIC", + [WM831X_AUX_BATT_TEMP] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000)); +} + +static ssize_t show_chip_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int ret; + + ret = wm831x_auxadc_read(hwmon->wm831x, channel); + if (ret < 0) + return ret; + + /* Degrees celsius = (512.18-ret) / 1.0983 */ + ret = 512180 - (ret * 1000); + ret = DIV_ROUND_CLOSEST(ret * 10000, 10983); + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM831X_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \ + NULL, name) + +#define WM831X_NAMED_VOLTAGE(id, name) \ + WM831X_VOLTAGE(id, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM831X_VOLTAGE(0, WM831X_AUX_AUX1); +WM831X_VOLTAGE(1, WM831X_AUX_AUX2); +WM831X_VOLTAGE(2, WM831X_AUX_AUX3); +WM831X_VOLTAGE(3, WM831X_AUX_AUX4); + +WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD); +WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB); +WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT); +WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL); +WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL, + WM831X_AUX_CHIP_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, + WM831X_AUX_CHIP_TEMP); +/* Report as a voltage since conversion depends on external components + * and that's what the ABI wants. */ +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL, + WM831X_AUX_BATT_TEMP); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, + WM831X_AUX_BATT_TEMP); + +static struct attribute *wm831x_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + + NULL +}; + +static const struct attribute_group wm831x_attr_group = { + .attrs = wm831x_attributes, +}; + +static int __devinit wm831x_hwmon_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_hwmon *hwmon; + int ret; + + hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->wm831x = wm831x; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group); + if (ret) + goto err; + + hwmon->classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon->classdev)) { + ret = PTR_ERR(hwmon->classdev); + goto err_sysfs; + } + + platform_set_drvdata(pdev, hwmon); + + return 0; + +err_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); +err: + kfree(hwmon); + return ret; +} + +static int __devexit wm831x_hwmon_remove(struct platform_device *pdev) +{ + struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev); + + hwmon_device_unregister(hwmon->classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group); + platform_set_drvdata(pdev, NULL); + kfree(hwmon); + + return 0; +} + +static struct platform_driver wm831x_hwmon_driver = { + .probe = wm831x_hwmon_probe, + .remove = __devexit_p(wm831x_hwmon_remove), + .driver = { + .name = "wm831x-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm831x_hwmon_init(void) +{ + return platform_driver_register(&wm831x_hwmon_driver); +} +module_init(wm831x_hwmon_init); + +static void __exit wm831x_hwmon_exit(void) +{ + platform_driver_unregister(&wm831x_hwmon_driver); +} +module_exit(wm831x_hwmon_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM831x Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-hwmon"); diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c new file mode 100644 index 000000000000..13290595ca86 --- /dev/null +++ b/drivers/hwmon/wm8350-hwmon.c @@ -0,0 +1,151 @@ +/* + * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC + * hardware monitoring features. + * + * Copyright (C) 2009 Wolfson Microelectronics plc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/comparator.h> + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "wm8350\n"); +} + +static const char *input_names[] = { + [WM8350_AUXADC_USB] = "USB", + [WM8350_AUXADC_LINE] = "Line", + [WM8350_AUXADC_BATT] = "Battery", +}; + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(attr)->index; + int val; + + val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF; + val = DIV_ROUND_CLOSEST(val, 1000); + + return sprintf(buf, "%d\n", val); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int channel = to_sensor_dev_attr(attr)->index; + + return sprintf(buf, "%s\n", input_names[channel]); +} + +#define WM8350_NAMED_VOLTAGE(id, name) \ + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\ + NULL, name); \ + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \ + NULL, name) + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB); +WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT); +WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE); + +static struct attribute *wm8350_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + + NULL, +}; + +static const struct attribute_group wm8350_attr_group = { + .attrs = wm8350_attributes, +}; + +static int __devinit wm8350_hwmon_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + int ret; + + ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group); + if (ret) + goto err; + + wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev); + if (IS_ERR(wm8350->hwmon.classdev)) { + ret = PTR_ERR(wm8350->hwmon.classdev); + goto err_group; + } + + return 0; + +err_group: + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); +err: + return ret; +} + +static int __devexit wm8350_hwmon_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + + hwmon_device_unregister(wm8350->hwmon.classdev); + sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group); + + return 0; +} + +static struct platform_driver wm8350_hwmon_driver = { + .probe = wm8350_hwmon_probe, + .remove = __devexit_p(wm8350_hwmon_remove), + .driver = { + .name = "wm8350-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init wm8350_hwmon_init(void) +{ + return platform_driver_register(&wm8350_hwmon_driver); +} +module_init(wm8350_hwmon_init); + +static void __exit wm8350_hwmon_exit(void) +{ + platform_driver_unregister(&wm8350_hwmon_driver); +} +module_exit(wm8350_hwmon_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM8350 Hardware Monitoring"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-hwmon"); |